2018-03-10T05:15:12.780Z,1520658912.780 [Supervisor](DEBUG): Initializing supervisor.
2018-03-10T05:15:12.783Z,1520658912.783 [SyncHandler](DEBUG): Created PCaller Thread at 404514E0
2018-03-10T05:15:12.784Z,1520658912.784 [SyncHandler](INFO): Protected caller Thread ID is 8612
2018-03-10T05:15:12.784Z,1520658912.784 [ComponentRegistry](DEBUG): Component "controlThread" handled in its own thread.
2018-03-10T05:15:12.785Z,1520658912.785 [controlThread ThreadHandler](DEBUG): Created PCaller Thread at 404814E0
2018-03-10T05:15:12.785Z,1520658912.785 [controlThread ThreadHandler](INFO): Protected caller Thread ID is 8613
2018-03-10T05:15:12.788Z,1520658912.788 [ComponentRegistry](DEBUG): SyncComponent "CycleStarter" handled in the control thread.
2018-03-10T05:15:12.799Z,1520658912.799 [ComponentRegistry](DEBUG): Component "CommandLine" handled in its own thread.
2018-03-10T05:15:12.800Z,1520658912.800 [CommandLine ThreadHandler](DEBUG): Created PCaller Thread at 404B14E0
2018-03-10T05:15:12.801Z,1520658912.801 [CommandLine ThreadHandler](INFO): Protected caller Thread ID is 8614
2018-03-10T05:15:12.801Z,1520658912.801 [ComponentRegistry](DEBUG): Component "logger" handled in its own thread.
2018-03-10T05:15:12.802Z,1520658912.802 [logger ThreadHandler](DEBUG): Created PCaller Thread at 404E14E0
2018-03-10T05:15:12.803Z,1520658912.803 [logger ThreadHandler](INFO): Protected caller Thread ID is 8615
2018-03-10T05:15:12.805Z,1520658912.805 [ComponentRegistry](DEBUG): SyncComponent "LogSplitter" handled in the control thread.
2018-03-10T05:15:12.805Z,1520658912.805 [Supervisor](INFO): Looking for Config files in directory: Config/
2018-03-10T05:15:12.807Z,1520658912.807 [Supervisor](INFO): Opening Config file at: Config/BIT.cfg
2018-03-10T05:15:12.982Z,1520658912.982 [ComponentRegistry](DEBUG): Loaded Config Component "Config/BIT
2018-03-10T05:15:12.983Z,1520658912.983 [Supervisor](INFO): Opening Config file at: Config/Derivation.cfg
2018-03-10T05:15:13.113Z,1520658913.113 [ComponentRegistry](DEBUG): Loaded Config Component "Config/Derivation
2018-03-10T05:15:13.113Z,1520658913.113 [Supervisor](INFO): Opening Config file at: Config/Control.cfg
2018-03-10T05:15:13.422Z,1520658913.422 [ComponentRegistry](DEBUG): Loaded Config Component "Config/Control
2018-03-10T05:15:13.423Z,1520658913.423 [Supervisor](INFO): Opening Config file at: Config/Estimation.cfg
2018-03-10T05:15:13.549Z,1520658913.549 [ComponentRegistry](DEBUG): Loaded Config Component "Config/Estimation
2018-03-10T05:15:13.550Z,1520658913.550 [Supervisor](INFO): Opening Config file at: Config/Guidance.cfg
2018-03-10T05:15:13.627Z,1520658913.627 [Supervisor](INFO): Opening Config file at: Config/Navigation.cfg
2018-03-10T05:15:13.809Z,1520658913.809 [ComponentRegistry](DEBUG): Loaded Config Component "Config/Navigation
2018-03-10T05:15:13.810Z,1520658913.810 [Supervisor](INFO): Opening Config file at: Config/Sample.cfg
2018-03-10T05:15:13.904Z,1520658913.904 [ComponentRegistry](DEBUG): Loaded Config Component "Config/Sample
2018-03-10T05:15:13.905Z,1520658913.905 [Supervisor](INFO): Opening Config file at: Config/Science.cfg
2018-03-10T05:15:14.202Z,1520658914.202 [ComponentRegistry](DEBUG): Loaded Config Component "Config/Science
2018-03-10T05:15:14.203Z,1520658914.203 [Supervisor](INFO): Opening Config file at: Config/Sensor.cfg
2018-03-10T05:15:14.528Z,1520658914.528 [ComponentRegistry](DEBUG): Loaded Config Component "Config/Sensor
2018-03-10T05:15:14.529Z,1520658914.529 [Supervisor](INFO): Opening Config file at: Config/Servo.cfg
2018-03-10T05:15:14.804Z,1520658914.804 [ComponentRegistry](DEBUG): Loaded Config Component "Config/Servo
2018-03-10T05:15:14.805Z,1520658914.805 [Supervisor](INFO): Opening Config file at: Config/Simulator.cfg
2018-03-10T05:15:15.256Z,1520658915.256 [ComponentRegistry](DEBUG): Loaded Config Component "Config/Simulator
2018-03-10T05:15:15.257Z,1520658915.257 [Supervisor](INFO): Opening Config file at: Config/logger.cfg
2018-03-10T05:15:15.441Z,1520658915.441 [ComponentRegistry](DEBUG): Loaded Config Component "Config/logger
2018-03-10T05:15:15.441Z,1520658915.441 [Supervisor](INFO): Opening Config file at: Config/secure.cfg
2018-03-10T05:15:15.535Z,1520658915.535 [ComponentRegistry](DEBUG): Loaded Config Component "Config/secure
2018-03-10T05:15:15.536Z,1520658915.536 [Supervisor](INFO): Opening Config file at: Config/vehicle.cfg
2018-03-10T05:15:15.965Z,1520658915.965 [ComponentRegistry](DEBUG): Loaded Config Component "Config/vehicle
2018-03-10T05:15:15.966Z,1520658915.966 [Supervisor](INFO): Opening Config file at: Config/workSite.cfg
2018-03-10T05:15:16.067Z,1520658916.067 [ComponentRegistry](DEBUG): Loaded Config Component "Config/workSite
2018-03-10T05:15:16.069Z,1520658916.069 [Supervisor](INFO): Looking for Config files in directory: Config/lrauv-aku/
2018-03-10T05:15:16.070Z,1520658916.070 [Supervisor](INFO): Opening Config file at: Config/lrauv-aku/Battery.cfg
2018-03-10T05:15:16.289Z,1520658916.289 [ComponentRegistry](DEBUG): Loaded Config Component "Config/Battery
2018-03-10T05:15:16.290Z,1520658916.290 [Supervisor](INFO): Opening Config file at: Config/lrauv-aku/BIT.cfg
2018-03-10T05:15:16.382Z,1520658916.382 [Supervisor](INFO): Opening Config file at: Config/lrauv-aku/Navigation.cfg
2018-03-10T05:15:16.481Z,1520658916.481 [Supervisor](INFO): Opening Config file at: Config/lrauv-aku/Control.cfg
2018-03-10T05:15:16.572Z,1520658916.572 [Supervisor](INFO): Opening Config file at: Config/lrauv-aku/Simulator.cfg
2018-03-10T05:15:16.654Z,1520658916.654 [Supervisor](INFO): Opening Config file at: Config/lrauv-aku/Science.cfg
2018-03-10T05:15:16.797Z,1520658916.797 [Supervisor](INFO): Opening Config file at: Config/lrauv-aku/Sensor.cfg
2018-03-10T05:15:16.968Z,1520658916.968 [Supervisor](INFO): Opening Config file at: Config/lrauv-aku/Servo.cfg
2018-03-10T05:15:17.068Z,1520658917.068 [Supervisor](INFO): Opening Config file at: Config/lrauv-aku/logger.cfg
2018-03-10T05:15:17.159Z,1520658917.159 [Supervisor](INFO): Opening Config file at: Config/lrauv-aku/secure.cfg
2018-03-10T05:15:17.239Z,1520658917.239 [Supervisor](INFO): Opening Config file at: Config/lrauv-aku/vehicle.cfg
2018-03-10T05:15:17.392Z,1520658917.392 [Supervisor](IMPORTANT): Reading configuration overrides from Data/persisted.cfg
2018-03-10T05:15:17.396Z,1520658917.396 [Module Loader](DEBUG): Loading Module at Modules/BIT.so
2018-03-10T05:15:17.532Z,1520658917.532 [SBIT](DEBUG): Construct Startup Built In Test.
2018-03-10T05:15:17.561Z,1520658917.561 [SBIT] Loaded
2018-03-10T05:15:17.561Z,1520658917.561 [ComponentRegistry](DEBUG): SyncComponent "SBIT" handled in the control thread.
2018-03-10T05:15:17.562Z,1520658917.562 [IBIT](DEBUG): Construct Initiated Built In Test.
2018-03-10T05:15:17.588Z,1520658917.588 [IBIT] Loaded
2018-03-10T05:15:17.588Z,1520658917.588 [ComponentRegistry](DEBUG): SyncComponent "IBIT" handled in the control thread.
2018-03-10T05:15:17.592Z,1520658917.592 [CBIT](DEBUG): Construct Continuous Built In Test.
2018-03-10T05:15:17.769Z,1520658917.769 [CBIT] Loaded
2018-03-10T05:15:17.769Z,1520658917.769 [ComponentRegistry](DEBUG): SyncComponent "CBIT" handled in the control thread.
2018-03-10T05:15:17.769Z,1520658917.769 [Module Loader](DEBUG): Loaded Module: BIT (Contains the BuiltInTest components, such as C Built In Test)
2018-03-10T05:15:17.770Z,1520658917.770 [Module Loader](DEBUG): Loading Module at Modules/Control.so
2018-03-10T05:15:17.841Z,1520658917.841 [VerticalControl](DEBUG): Construct VerticalControl.
2018-03-10T05:15:17.937Z,1520658917.937 [VerticalControl] Loaded
2018-03-10T05:15:17.937Z,1520658917.937 [ComponentRegistry](DEBUG): SyncComponent "VerticalControl" handled in the control thread.
2018-03-10T05:15:17.938Z,1520658917.938 [HorizontalControl](DEBUG): Construct HorizontalControl.
2018-03-10T05:15:17.996Z,1520658917.996 [HorizontalControl] Loaded
2018-03-10T05:15:17.997Z,1520658917.997 [ComponentRegistry](DEBUG): SyncComponent "HorizontalControl" handled in the control thread.
2018-03-10T05:15:17.997Z,1520658917.997 [SpeedControl](DEBUG): Construct SpeedControl.
2018-03-10T05:15:18.003Z,1520658918.003 [SpeedControl] Loaded
2018-03-10T05:15:18.003Z,1520658918.003 [ComponentRegistry](DEBUG): SyncComponent "SpeedControl" handled in the control thread.
2018-03-10T05:15:18.004Z,1520658918.004 [LoopControl](DEBUG): Construct LoopControl.
2018-03-10T05:15:18.004Z,1520658918.004 [LoopControl] Loaded
2018-03-10T05:15:18.004Z,1520658918.004 [ComponentRegistry](DEBUG): SyncComponent "LoopControl" handled in the control thread.
2018-03-10T05:15:18.005Z,1520658918.005 [Module Loader](DEBUG): Loaded Module: Control (Contains the Control components, such as Depth, Heading, and Speed Control)
2018-03-10T05:15:18.005Z,1520658918.005 [Module Loader](DEBUG): Loading Module at Modules/Derivation.so
2018-03-10T05:15:18.048Z,1520658918.048 [DepthRateCalculator] Loaded
2018-03-10T05:15:18.048Z,1520658918.048 [ComponentRegistry](DEBUG): SyncComponent "DepthRateCalculator" handled in the control thread.
2018-03-10T05:15:18.054Z,1520658918.054 [PitchRateCalculator] Loaded
2018-03-10T05:15:18.054Z,1520658918.054 [ComponentRegistry](DEBUG): SyncComponent "PitchRateCalculator" handled in the control thread.
2018-03-10T05:15:18.069Z,1520658918.069 [SpeedCalculator] Loaded
2018-03-10T05:15:18.069Z,1520658918.069 [ComponentRegistry](DEBUG): SyncComponent "SpeedCalculator" handled in the control thread.
2018-03-10T05:15:18.090Z,1520658918.090 [TempGradientCalculator] Loaded
2018-03-10T05:15:18.090Z,1520658918.090 [ComponentRegistry](DEBUG): SyncComponent "TempGradientCalculator" handled in the control thread.
2018-03-10T05:15:18.105Z,1520658918.105 [VerticalTemperatureHomogeneityIndexCalculator] Loaded
2018-03-10T05:15:18.106Z,1520658918.106 [ComponentRegistry](DEBUG): SyncComponent "VerticalTemperatureHomogeneityIndexCalculator" handled in the control thread.
2018-03-10T05:15:18.111Z,1520658918.111 [YawRateCalculator] Loaded
2018-03-10T05:15:18.111Z,1520658918.111 [ComponentRegistry](DEBUG): SyncComponent "YawRateCalculator" handled in the control thread.
2018-03-10T05:15:18.112Z,1520658918.112 [Module Loader](DEBUG): Loaded Module: Derivation (Contains the base derivation components)
2018-03-10T05:15:18.112Z,1520658918.112 [Module Loader](DEBUG): Loading Module at Modules/Estimation.so
2018-03-10T05:15:18.200Z,1520658918.200 [StratificationFrontDetector](INFO): threshold set to: 0.399988 degC
2018-03-10T05:15:18.200Z,1520658918.200 [StratificationFrontDetector](DEBUG): (re)initializing
2018-03-10T05:15:18.200Z,1520658918.200 [StratificationFrontDetector] Loaded
2018-03-10T05:15:18.201Z,1520658918.201 [ComponentRegistry](DEBUG): SyncComponent "StratificationFrontDetector" handled in the control thread.
2018-03-10T05:15:18.201Z,1520658918.201 [Module Loader](DEBUG): Loaded Module: Estimation (Contains the base estimation components)
2018-03-10T05:15:18.202Z,1520658918.202 [Module Loader](DEBUG): Loading Module at Modules/Guidance.so
2018-03-10T05:15:18.453Z,1520658918.453 [Module Loader](DEBUG): Loaded Module: Guidance (Contains behaviors and commands)
2018-03-10T05:15:18.454Z,1520658918.454 [Module Loader](DEBUG): Loading Module at Modules/Navigation.so
2018-03-10T05:15:18.551Z,1520658918.551 [DeadReckonUsingMultipleVelocitySources] Loaded
2018-03-10T05:15:18.551Z,1520658918.551 [ComponentRegistry](DEBUG): SyncComponent "DeadReckonUsingMultipleVelocitySources" handled in the control thread.
2018-03-10T05:15:18.605Z,1520658918.605 [DeadReckonUsingSpeedCalculator] Loaded
2018-03-10T05:15:18.605Z,1520658918.605 [ComponentRegistry](DEBUG): SyncComponent "DeadReckonUsingSpeedCalculator" handled in the control thread.
2018-03-10T05:15:18.716Z,1520658918.716 [DeadReckonWithRespectToSeafloor] Loaded
2018-03-10T05:15:18.717Z,1520658918.717 [ComponentRegistry](DEBUG): SyncComponent "DeadReckonWithRespectToSeafloor" handled in the control thread.
2018-03-10T05:15:18.732Z,1520658918.732 [NavChart] Loaded
2018-03-10T05:15:18.733Z,1520658918.733 [ComponentRegistry](DEBUG): SyncComponent "NavChart" handled in the control thread.
2018-03-10T05:15:18.736Z,1520658918.736 [UniversalFixResidualReporter] Loaded
2018-03-10T05:15:18.737Z,1520658918.737 [ComponentRegistry](DEBUG): SyncComponent "UniversalFixResidualReporter" handled in the control thread.
2018-03-10T05:15:18.737Z,1520658918.737 [Module Loader](DEBUG): Loaded Module: Navigation (Contains the base navigation components)
2018-03-10T05:15:18.738Z,1520658918.738 [Module Loader](DEBUG): Loading Module at Modules/Sample.so
2018-03-10T05:15:18.752Z,1520658918.752 [Module Loader](DEBUG): Loaded Module: Sample (This is a Sample Module of Sample Components)
2018-03-10T05:15:18.752Z,1520658918.752 [Module Loader](DEBUG): Loading Module at Modules/Science.so
2018-03-10T05:15:18.914Z,1520658918.914 [Aanderaa_O2] Loaded
2018-03-10T05:15:18.914Z,1520658918.914 [ComponentRegistry](DEBUG): SyncComponent "Aanderaa_O2" handled in the control thread.
2018-03-10T05:15:18.961Z,1520658918.961 [CTD_Seabird] Loaded
2018-03-10T05:15:18.961Z,1520658918.961 [ComponentRegistry](DEBUG): Component "CTD_Seabird" handled in its own thread.
2018-03-10T05:15:18.962Z,1520658918.962 [CTD_Seabird ThreadHandler](DEBUG): Created PCaller Thread at 406D04E0
2018-03-10T05:15:18.963Z,1520658918.963 [CTD_Seabird ThreadHandler](INFO): Protected caller Thread ID is 8694
2018-03-10T05:15:18.979Z,1520658918.979 [ESPComponent] Loaded
2018-03-10T05:15:18.979Z,1520658918.979 [ComponentRegistry](DEBUG): SyncComponent "ESPComponent" handled in the control thread.
2018-03-10T05:15:18.993Z,1520658918.993 [PAR_Licor] Loaded
2018-03-10T05:15:18.993Z,1520658918.993 [ComponentRegistry](DEBUG): SyncComponent "PAR_Licor" handled in the control thread.
2018-03-10T05:15:19.041Z,1520658919.041 [WetLabsBB2FL] Loaded
2018-03-10T05:15:19.041Z,1520658919.041 [ComponentRegistry](DEBUG): Component "WetLabsBB2FL" handled in its own thread.
2018-03-10T05:15:19.042Z,1520658919.042 [WetLabsBB2FL ThreadHandler](DEBUG): Created PCaller Thread at 407004E0
2018-03-10T05:15:19.043Z,1520658919.043 [WetLabsBB2FL ThreadHandler](INFO): Protected caller Thread ID is 8695
2018-03-10T05:15:19.043Z,1520658919.043 [Module Loader](DEBUG): Loaded Module: Science (Contains the science components)
2018-03-10T05:15:19.044Z,1520658919.044 [Module Loader](DEBUG): Loading Module at Modules/Sensor.so
2018-03-10T05:15:19.317Z,1520658919.317 [DataOverHttps] Loaded
2018-03-10T05:15:19.318Z,1520658919.318 [ComponentRegistry](DEBUG): SyncComponent "DataOverHttps" handled in the control thread.
2018-03-10T05:15:19.331Z,1520658919.331 [Depth_Keller] Loaded
2018-03-10T05:15:19.331Z,1520658919.331 [ComponentRegistry](DEBUG): SyncComponent "Depth_Keller" handled in the control thread.
2018-03-10T05:15:19.336Z,1520658919.336 [DropWeight] Loaded
2018-03-10T05:15:19.336Z,1520658919.336 [ComponentRegistry](DEBUG): SyncComponent "DropWeight" handled in the control thread.
2018-03-10T05:15:19.425Z,1520658919.425 [NAL9602] Loaded
2018-03-10T05:15:19.426Z,1520658919.426 [ComponentRegistry](DEBUG): SyncComponent "NAL9602" handled in the control thread.
2018-03-10T05:15:19.431Z,1520658919.431 [Onboard] Loaded
2018-03-10T05:15:19.431Z,1520658919.431 [ComponentRegistry](DEBUG): SyncComponent "Onboard" handled in the control thread.
2018-03-10T05:15:19.438Z,1520658919.438 [Radio_Surface] Loaded
2018-03-10T05:15:19.438Z,1520658919.438 [ComponentRegistry](DEBUG): Component "Radio_Surface" handled in its own thread.
2018-03-10T05:15:19.439Z,1520658919.439 [Radio_Surface ThreadHandler](DEBUG): Created PCaller Thread at 409464E0
2018-03-10T05:15:19.440Z,1520658919.440 [Radio_Surface ThreadHandler](INFO): Protected caller Thread ID is 8696
2018-03-10T05:15:19.568Z,1520658919.568 [DAT] Loaded
2018-03-10T05:15:19.568Z,1520658919.568 [ComponentRegistry](DEBUG): SyncComponent "DAT" handled in the control thread.
2018-03-10T05:15:19.629Z,1520658919.629 [PNI_TCM] Loaded
2018-03-10T05:15:19.629Z,1520658919.629 [ComponentRegistry](DEBUG): SyncComponent "PNI_TCM" handled in the control thread.
2018-03-10T05:15:21.466Z,1520658921.466 [BPC1] Loaded
2018-03-10T05:15:21.466Z,1520658921.466 [ComponentRegistry](DEBUG): SyncComponent "BPC1" handled in the control thread.
2018-03-10T05:15:21.466Z,1520658921.466 [Module Loader](DEBUG): Loaded Module: Sensor (Contains the sensor components)
2018-03-10T05:15:21.467Z,1520658921.467 [Module Loader](DEBUG): Loading Module at Modules/Servo.so
2018-03-10T05:15:21.568Z,1520658921.568 [BuoyancyServo] Loaded
2018-03-10T05:15:21.568Z,1520658921.568 [ComponentRegistry](DEBUG): SyncComponent "BuoyancyServo" handled in the control thread.
2018-03-10T05:15:21.579Z,1520658921.579 [ElevatorServo] Loaded
2018-03-10T05:15:21.580Z,1520658921.580 [ComponentRegistry](DEBUG): SyncComponent "ElevatorServo" handled in the control thread.
2018-03-10T05:15:21.590Z,1520658921.590 [MassServo] Loaded
2018-03-10T05:15:21.590Z,1520658921.590 [ComponentRegistry](DEBUG): SyncComponent "MassServo" handled in the control thread.
2018-03-10T05:15:21.602Z,1520658921.602 [RudderServo] Loaded
2018-03-10T05:15:21.602Z,1520658921.602 [ComponentRegistry](DEBUG): SyncComponent "RudderServo" handled in the control thread.
2018-03-10T05:15:21.612Z,1520658921.612 [ThrusterServo] Loaded
2018-03-10T05:15:21.613Z,1520658921.613 [ComponentRegistry](DEBUG): SyncComponent "ThrusterServo" handled in the control thread.
2018-03-10T05:15:21.613Z,1520658921.613 [Module Loader](DEBUG): Loaded Module: Servo (This is the module containing motor controllers)
2018-03-10T05:15:21.614Z,1520658921.614 [Module Loader](DEBUG): Loading Module at Modules/Simulator.so
2018-03-10T05:15:21.717Z,1520658921.717 [Module Loader](DEBUG): Loaded Module: Simulator (This is the module containing the Simulator)
2018-03-10T05:15:21.718Z,1520658921.718 [Module Loader](DEBUG): Loading Module at Modules/Trigger.so
2018-03-10T05:15:21.743Z,1520658921.743 [Module Loader](DEBUG): Loaded Module: Trigger (Contains triggers for use in missions)
2018-03-10T05:15:21.746Z,1520658921.746 [ComponentRegistry](DEBUG): SyncComponent "MissionManager" handled in the control thread.
2018-03-10T05:15:21.747Z,1520658921.747 [ComponentRegistry](DEBUG): SyncComponent "Reporter" handled in the control thread.
2018-03-10T05:15:21.754Z,1520658921.754 [ComponentRegistry](DEBUG): Component "NavChartDb" handled in its own thread.
2018-03-10T05:15:21.755Z,1520658921.755 [NavChartDb ThreadHandler](DEBUG): Created PCaller Thread at 409ED4E0
2018-03-10T05:15:21.755Z,1520658921.755 [NavChartDb ThreadHandler](INFO): Protected caller Thread ID is 8697
2018-03-10T05:15:21.760Z,1520658921.760 [Supervisor](INFO): Main Thread ID is 8115
2018-03-10T05:15:21.760Z,1520658921.760 [Supervisor](DEBUG): Running supervisor.
2018-03-10T05:15:21.760Z,1520658921.760 [CommandLine ThreadHandler](INFO): Handler Thread ID is 8698
2018-03-10T05:15:21.763Z,1520658921.763 [controlThread ThreadHandler](INFO): Handler Thread ID is 8699
2018-03-10T05:15:21.763Z,1520658921.763 [controlThread](DEBUG): Initializing ControlThread
2018-03-10T05:15:21.764Z,1520658921.764 [SBIT](INFO): Initialize SBIT Component.
2018-03-10T05:15:21.765Z,1520658921.765 [SBIT](IMPORTANT): git: 2018-03-09
2018-03-10T05:15:21.765Z,1520658921.765 [SBIT](INFO): git hash: f0ec76a23ddb5e11d3d70ba61c7d67c0356dd1ec
2018-03-10T05:15:21.765Z,1520658921.765 [SBIT](IMPORTANT): Kernel Release: 2.6.27.8
2018-03-10T05:15:21.767Z,1520658921.767 [SBIT](INFO): Kernel Reporting Different Version From Configuration.
Kernel Expected: #639 PREEMPT Wed Mar 12 12:53:33 PDT 2014
Kernel Reported: #2 PREEMPT Thu Jan 11 20:13:48 PST 2018
2018-03-10T05:15:21.768Z,1520658921.768 [SBIT](INFO): Beginning SBIT in 79.000000 seconds.
2018-03-10T05:15:21.768Z,1520658921.768 [IBIT](INFO): Initialize IBIT Component.
2018-03-10T05:15:21.769Z,1520658921.769 [CBIT](DEBUG): Initialize CBIT Component.
2018-03-10T05:15:21.769Z,1520658921.769 [CBIT](INFO): Last reboot was NOT due to watchdog timer.
2018-03-10T05:15:21.770Z,1520658921.770 [logger ThreadHandler](INFO): Handler Thread ID is 8700
2018-03-10T05:15:21.795Z,1520658921.795 [CTD_Seabird ThreadHandler](INFO): Handler Thread ID is 8701
2018-03-10T05:15:21.796Z,1520658921.796 [CTD_Seabird](INFO): Initializing
2018-03-10T05:15:21.796Z,1520658921.796 [CTD_Seabird](INFO): Checking LCM
2018-03-10T05:15:21.805Z,1520658921.805 [CTD_Seabird](INFO): LCM OK
2018-03-10T05:15:21.805Z,1520658921.805 [CTD_Seabird](INFO): Powering up
2018-03-10T05:15:21.811Z,1520658921.811 [WetLabsBB2FL ThreadHandler](INFO): Handler Thread ID is 8702
2018-03-10T05:15:21.813Z,1520658921.813 [WetLabsBB2FL](INFO): Powering down
2018-03-10T05:15:21.835Z,1520658921.835 [Radio_Surface ThreadHandler](INFO): Handler Thread ID is 8703
2018-03-10T05:15:21.841Z,1520658921.841 [Radio_Surface](INFO): Powering up
2018-03-10T05:15:21.847Z,1520658921.847 [NavChartDb ThreadHandler](INFO): Handler Thread ID is 8704
2018-03-10T05:15:21.850Z,1520658921.850 [NavChartDb](INFO): Looking for Electronic Nav Chart file at: Resources/ElectronicNavigationCharts/US2HA05M.000
2018-03-10T05:15:21.850Z,1520658921.850 [NavChartDb](INFO): Already Loaded Electronic Nav Chart data from US2HA05M.000
2018-03-10T05:15:21.850Z,1520658921.850 [NavChartDb](INFO): Looking for Electronic Nav Chart file at: Resources/ElectronicNavigationCharts/US3HA20M.000
2018-03-10T05:15:21.851Z,1520658921.851 [NavChartDb](INFO): Already Loaded Electronic Nav Chart data from US3HA20M.000
2018-03-10T05:15:21.851Z,1520658921.851 [NavChartDb](INFO): Looking for Electronic Nav Chart file at: Resources/ElectronicNavigationCharts/US4HA51M.000
2018-03-10T05:15:21.851Z,1520658921.851 [NavChartDb](INFO): Already Loaded Electronic Nav Chart data from US4HA51M.000
2018-03-10T05:15:21.852Z,1520658921.852 [NavChartDb](INFO): Looking for Electronic Nav Chart file at: Resources/ElectronicNavigationCharts/US4HA51M.000
2018-03-10T05:15:21.852Z,1520658921.852 [NavChartDb](INFO): Already Loaded Electronic Nav Chart data from US4HA51M.000
2018-03-10T05:15:21.852Z,1520658921.852 [NavChartDb](INFO): Looking for Electronic Nav Chart file at: Resources/ElectronicNavigationCharts/US5HA53M.000
2018-03-10T05:15:21.852Z,1520658921.852 [NavChartDb](INFO): Already Loaded Electronic Nav Chart data from US5HA53M.000
2018-03-10T05:15:21.852Z,1520658921.852 [NavChartDb](INFO): Looking for Electronic Nav Chart file at: Resources/ElectronicNavigationCharts/US5HA55M.000
2018-03-10T05:15:21.853Z,1520658921.853 [NavChartDb](INFO): Already Loaded Electronic Nav Chart data from US5HA55M.000
2018-03-10T05:15:21.875Z,1520658921.875 [VerticalControl](DEBUG): Initialize VerticalControlComponent.
2018-03-10T05:15:21.876Z,1520658921.876 [HorizontalControl](DEBUG): Initialize HorizontalControlComponent.
2018-03-10T05:15:21.877Z,1520658921.877 [SpeedControl](DEBUG): Initialize SpeedControlComponent.
2018-03-10T05:15:21.877Z,1520658921.877 [LoopControl](DEBUG): Initialize LoopControlComponent.
2018-03-10T05:15:21.878Z,1520658921.878 [DepthRateCalculator](DEBUG): Initializing DepthRateCalculator.
2018-03-10T05:15:21.878Z,1520658921.878 [PitchRateCalculator](DEBUG): Initializing PitchRateCalculator.
2018-03-10T05:15:21.878Z,1520658921.878 [SpeedCalculator](DEBUG): Initializing SpeedCalculator.
2018-03-10T05:15:21.879Z,1520658921.879 [TempGradientCalculator](DEBUG): Initializing TempGradientCalculator.
2018-03-10T05:15:21.879Z,1520658921.879 [VerticalTemperatureHomogeneityIndexCalculator](DEBUG): (re)initializing
2018-03-10T05:15:21.880Z,1520658921.880 [YawRateCalculator](DEBUG): Initializing YawRateCalculator.
2018-03-10T05:15:21.880Z,1520658921.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-03-10T05:15:21.881Z,1520658921.881 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-03-10T05:15:21.882Z,1520658921.882 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-03-10T05:15:21.882Z,1520658921.882 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-03-10T05:15:21.882Z,1520658921.882 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-03-10T05:15:21.883Z,1520658921.883 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-03-10T05:15:21.883Z,1520658921.883 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-10T05:15:21.884Z,1520658921.884 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-10T05:15:21.884Z,1520658921.884 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-10T05:15:21.884Z,1520658921.884 [NavChart](DEBUG): Initialize NavChart Navigation.
2018-03-10T05:15:21.885Z,1520658921.885 [UniversalFixResidualReporter](DEBUG): Initializing UniversalFixResidualReporter component.
2018-03-10T05:15:21.899Z,1520658921.899 [MissionManager](INFO): Loading Mission: Missions/Startup.xml
2018-03-10T05:15:21.926Z,1520658921.926 [Startup:A.GoToSurface](DEBUG): Construct GoToSurface.
2018-03-10T05:15:21.962Z,1520658921.962 [MissionManager](DEBUG): 
<?xml version="1.0" encoding="UTF-8"?>
<Mission xmlns="Tethys"
       xmlns:Control="Tethys/Control"
       xmlns:Guidance="Tethys/Guidance" 
       xmlns:Units="Tethys/Units"
       xmlns:Universal="Tethys/Universal"
       xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
       xsi:schemaLocation="Tethys http://okeanids.mbari.org/tethys/Xml/Tethys.xsd
                           Tethys/Control http://okeanids.mbari.org/tethys/Xml/Control.xsd
                           Tethys/Guidance http://okeanids.mbari.org/tethys/Xml/Guidance.xsd
                           Tethys/Units http://okeanids.mbari.org/tethys/Xml/Units.xsd
                           Tethys/Universal http://okeanids.mbari.org/tethys/Xml/Universal.xsd"
       Id="Startup">

    <Guidance:GoToSurface>
        <Progression/>
    </Guidance:GoToSurface>

    <Aggregate Id="StartupSatComms">

        <Sequence/>

        <ReadDatum>
            <Timeout Duration="P1M" />
            <Universal:latitude_fix/>
        </ReadDatum>

        <ReadDatum>
            <Timeout Duration="P1M" />
            <Universal:platform_communications/>
        </ReadDatum>

    </Aggregate>

</Mission>


2018-03-10T05:15:21.971Z,1520658921.971 [MissionManager](INFO): Loading Mission: Missions/Default.xml
2018-03-10T05:15:22.036Z,1520658922.036 [MissionManager](INFO): DefineArg Default.ElapsedSinceDefaultStarted = 0.000000 min
2018-03-10T05:15:22.037Z,1520658922.037 [Default:A.Wait](DEBUG): Construct Wait.
2018-03-10T05:15:22.055Z,1520658922.055 [Default:B.GoToSurface](DEBUG): Construct GoToSurface.
2018-03-10T05:15:22.073Z,1520658922.073 [Default:CheckIn:Read_Iridium:A_Timeout:A.Execute](DEBUG): Construct Execute.
2018-03-10T05:15:22.100Z,1520658922.100 [Default:CheckIn:C.Wait](DEBUG): Construct Wait.
2018-03-10T05:15:22.129Z,1520658922.129 [Default:E.Execute](DEBUG): Construct Execute.
2018-03-10T05:15:22.133Z,1520658922.133 [MissionManager](DEBUG): 
<?xml version="1.0" encoding="UTF-8"?>
<Mission xmlns="Tethys"
xmlns:Guidance="Tethys/Guidance"
xmlns:Units="Tethys/Units"
xmlns:Universal="Tethys/Universal"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xsi:schemaLocation="Tethys http://okeanids.mbari.org/tethys/Xml/Tethys.xsd
Tethys/Guidance http://okeanids.mbari.org/tethys/Xml/Guidance.xsd
Tethys/Units http://okeanids.mbari.org/tethys/Xml/Units.xsd
Tethys/Universal http://okeanids.mbari.org/tethys/Xml/Universal.xsd"
Id="Default">

    <DefineArg Name="ElapsedSinceDefaultStarted"><Units:minute/><Value>0</Value></DefineArg>

    <Guidance:Wait>
        <Sequence/>
        <Description>
            Wait a moment to see if the scheduler starts a new mission before
            starting to actually run Default.
        </Description>
        <Setting><Guidance:Wait.duration/><Units:second/><Value>13</Value></Setting>
    </Guidance:Wait>

    <Guidance:GoToSurface>
        <Progression/>
    </Guidance:GoToSurface>

    <Aggregate Id="CheckIn">

        <Sequence Repeat="288"/>

        <ReadDatum Id="Read_GPS">
            <Sequence/>
            <Timeout Duration="P5M"/>
            <Universal:time_fix/>
        </ReadDatum>

        <ReadDatum Id="Read_Iridium">
            <Sequence/>
            <Timeout Duration="P2H">
                <Guidance:Execute>
                    <Sequence/>
                    <Setting><Guidance:Execute.command/><String>Burn 300</String></Setting>
                </Guidance:Execute>
                <Syslog Severity="Critical">Dropped weight due to communications timeout.</Syslog>
            </Timeout>
            <Universal:platform_communications/>
        </ReadDatum>

        <Guidance:Wait>
            <Sequence/>
            <Setting><Guidance:Wait.duration/><Units:minute/><Value>5</Value></Setting>
        </Guidance:Wait>

        <Assign><Sequence/><Arg Name="ElapsedSinceDefaultStarted"/><Elapsed><Universal:mission_started/></Elapsed></Assign>

        <Syslog Severity="Important">Default mission has been running for <Arg Name="ElapsedSinceDefaultStarted"/><Units:minute/></Syslog>

    </Aggregate>

    <Syslog Severity="Important">Restarting logs and Default mission.</Syslog>

    <Guidance:Execute>
        <Sequence/>
        <Setting><Guidance:Execute.command/><String>restart logs</String></Setting>
    </Guidance:Execute>

</Mission>


2018-03-10T05:15:22.143Z,1520658922.143 [controlThread](DEBUG): Component order: CycleStarter,Aanderaa_O2,ESPComponent,PAR_Licor,DataOverHttps,Depth_Keller,DropWeight,NAL9602,Onboard,DAT,PNI_TCM,BPC1,PAR_Licor,Depth_Keller,DepthRateCalculator,PitchRateCalculator,SpeedCalculator,TempGradientCalculator,VerticalTemperatureHomogeneityIndexCalculator,YawRateCalculator,StratificationFrontDetector,DeadReckonUsingMultipleVelocitySources,DeadReckonUsingSpeedCalculator,DeadReckonWithRespectToSeafloor,NavChart,UniversalFixResidualReporter,MissionManager,VerticalControl,HorizontalControl,SpeedControl,LoopControl,BuoyancyServo,ElevatorServo,MassServo,RudderServo,ThrusterServo,SBIT,IBIT,CBIT,Reporter,LogSplitter,
2018-03-10T05:15:22.177Z,1520658922.177 [ESPComponent](INFO): powering down ESP
2018-03-10T05:15:22.545Z,1520658922.545 [DataOverHttps](DEBUG): dashIP=134.89.2.23 starts with a digit so assuming it is a numeric IP
2018-03-10T05:15:22.635Z,1520658922.635 [DAT](INFO): Powering up
2018-03-10T05:15:22.635Z,1520658922.635 [DAT](DEBUG): Initializing DAT.
2018-03-10T05:15:22.867Z,1520658922.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Starting up and don't have orientation data yet.
2018-03-10T05:15:22.867Z,1520658922.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): All data for platform velocity is invalid.
2018-03-10T05:15:22.871Z,1520658922.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:15:22.895Z,1520658922.895 [DeadReckonUsingSpeedCalculator](DEBUG): Starting up and don't have orientation data yet.
2018-03-10T05:15:22.901Z,1520658922.901 [DeadReckonWithRespectToSeafloor](DEBUG): Starting up and don't have orientation data yet.
2018-03-10T05:15:23.031Z,1520658923.031 [BuoyancyServo](DEBUG): Initializing EZServoServo.
2018-03-10T05:15:23.039Z,1520658923.039 [BuoyancyServo](DEBUG): Initializing BuoyancyServo.
2018-03-10T05:15:23.053Z,1520658923.053 [ElevatorServo](DEBUG): Initializing EZServoServo.
2018-03-10T05:15:23.059Z,1520658923.059 [ElevatorServo](DEBUG): Initializing ElevatorServo.
2018-03-10T05:15:23.081Z,1520658923.081 [MassServo](DEBUG): Initializing EZServoServo.
2018-03-10T05:15:23.087Z,1520658923.087 [MassServo](DEBUG): Initializing MassServo.
2018-03-10T05:15:23.101Z,1520658923.101 [RudderServo](DEBUG): Initializing EZServoServo.
2018-03-10T05:15:23.107Z,1520658923.107 [RudderServo](DEBUG): Initializing RudderServo.
2018-03-10T05:15:23.119Z,1520658923.119 [ThrusterServo](DEBUG): Initializing EZServoServo.
2018-03-10T05:15:23.127Z,1520658923.127 [ThrusterServo](DEBUG): Initializing ThrusterServo.
2018-03-10T05:15:23.555Z,1520658923.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Starting up and don't have orientation data yet.
2018-03-10T05:15:23.556Z,1520658923.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): All data for platform velocity is invalid.
2018-03-10T05:15:23.557Z,1520658923.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:15:23.557Z,1520658923.557 [DeadReckonUsingSpeedCalculator](DEBUG): Starting up and don't have orientation data yet.
2018-03-10T05:15:23.558Z,1520658923.558 [DeadReckonWithRespectToSeafloor](DEBUG): Starting up and don't have orientation data yet.
2018-03-10T05:15:23.895Z,1520658923.895 [BuoyancyServo](ERROR): Buoyancy initialization uart error serial timeout
2018-03-10T05:15:23.895Z,1520658923.895 [BuoyancyServo](FAULT): Buoyancy failed to initialize
2018-03-10T05:15:23.895Z,1520658923.895 [BuoyancyServo] Communications Fault, FailCount= 1
2018-03-10T05:15:23.895Z,1520658923.895 [BuoyancyServo](ERROR): Communications Fault
2018-03-10T05:15:24.102Z,1520658924.102 [CBIT](ERROR): Communications Fault in component: BuoyancyServo
2018-03-10T05:15:24.138Z,1520658924.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Starting up and don't have orientation data yet.
2018-03-10T05:15:24.151Z,1520658924.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): All data for platform velocity is invalid.
2018-03-10T05:15:24.152Z,1520658924.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:15:24.152Z,1520658924.152 [DeadReckonUsingSpeedCalculator](DEBUG): Starting up and don't have orientation data yet.
2018-03-10T05:15:24.153Z,1520658924.153 [DeadReckonWithRespectToSeafloor](DEBUG): Starting up and don't have orientation data yet.
2018-03-10T05:15:24.163Z,1520658924.163 [BuoyancyServo](DEBUG): Uninitialize Buoyancy Servo.
2018-03-10T05:15:24.179Z,1520658924.179 [BuoyancyServo](INFO): Powering down
2018-03-10T05:15:24.543Z,1520658924.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Starting up and don't have orientation data yet.
2018-03-10T05:15:24.543Z,1520658924.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): All data for platform velocity is invalid.
2018-03-10T05:15:24.544Z,1520658924.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:15:24.545Z,1520658924.545 [DeadReckonUsingSpeedCalculator](DEBUG): Starting up and don't have orientation data yet.
2018-03-10T05:15:24.546Z,1520658924.546 [DeadReckonWithRespectToSeafloor](DEBUG): Starting up and don't have orientation data yet.
2018-03-10T05:15:25.033Z,1520658925.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Starting up and don't have orientation data yet.
2018-03-10T05:15:25.033Z,1520658925.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): All data for platform velocity is invalid.
2018-03-10T05:15:25.034Z,1520658925.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:15:25.035Z,1520658925.035 [DeadReckonUsingSpeedCalculator](DEBUG): Starting up and don't have orientation data yet.
2018-03-10T05:15:25.047Z,1520658925.047 [DeadReckonWithRespectToSeafloor](DEBUG): Starting up and don't have orientation data yet.
2018-03-10T05:15:25.431Z,1520658925.431 [Aanderaa_O2](INFO): Powering down
2018-03-10T05:15:25.562Z,1520658925.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Starting up and don't have orientation data yet.
2018-03-10T05:15:25.562Z,1520658925.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): All data for platform velocity is invalid.
2018-03-10T05:15:25.563Z,1520658925.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:15:25.564Z,1520658925.564 [DeadReckonUsingSpeedCalculator](DEBUG): Starting up and don't have orientation data yet.
2018-03-10T05:15:25.565Z,1520658925.565 [DeadReckonWithRespectToSeafloor](DEBUG): Starting up and don't have orientation data yet.
2018-03-10T05:15:25.756Z,1520658925.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Starting up and don't have orientation data yet.
2018-03-10T05:15:25.756Z,1520658925.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): All data for platform velocity is invalid.
2018-03-10T05:15:25.757Z,1520658925.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:15:25.757Z,1520658925.757 [DeadReckonUsingSpeedCalculator](DEBUG): Starting up and don't have orientation data yet.
2018-03-10T05:15:25.758Z,1520658925.758 [DeadReckonWithRespectToSeafloor](DEBUG): Starting up and don't have orientation data yet.
2018-03-10T05:15:26.162Z,1520658926.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): All data for platform velocity is invalid.
2018-03-10T05:15:26.173Z,1520658926.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:15:26.303Z,1520658926.303 [CBIT](INFO): Clearing failed state for component BuoyancyServo
2018-03-10T05:15:26.303Z,1520658926.303 [BuoyancyServo] No Fault, FailCount= 1
2018-03-10T05:15:26.587Z,1520658926.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): All data for platform velocity is invalid.
2018-03-10T05:15:26.588Z,1520658926.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:15:26.595Z,1520658926.595 [BuoyancyServo](DEBUG): Initializing EZServoServo.
2018-03-10T05:15:26.716Z,1520658926.716 [BuoyancyServo](DEBUG): Initializing BuoyancyServo.
2018-03-10T05:15:27.015Z,1520658927.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): All data for platform velocity is invalid.
2018-03-10T05:15:27.016Z,1520658927.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:15:27.401Z,1520658927.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:15:27.535Z,1520658927.535 [CTD_Seabird](INFO): Stopping potential previous instance(s) of CTD_Seabird LCM interface
2018-03-10T05:15:27.622Z,1520658927.622 [CTD_Seabird](INFO): Started Seabird LCM interface with command:nohup ./lrauv-framework/onboard/bin/gpctd -ldir /mnt/mmc/LRAUV/Logs/latest/ -dev /dev/ttyC6 -b 9600 >& /dev/null &
2018-03-10T05:15:27.672Z,1520658927.672 [CTD_Seabird](INFO): LCM subscribed to channel:ctd_t.seabird-gpctd
2018-03-10T05:15:27.823Z,1520658927.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:15:28.042Z,1520658928.042 [CTD_Seabird](INFO): Stopping potential previous instance(s) of CTD_Seabird LCM interface
2018-03-10T05:15:28.042Z,1520658928.042 [CTD_Seabird](INFO): Powering down
2018-03-10T05:15:28.181Z,1520658928.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:15:28.619Z,1520658928.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:15:28.964Z,1520658928.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:15:29.378Z,1520658929.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:15:29.773Z,1520658929.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:15:30.169Z,1520658930.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:15:30.605Z,1520658930.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:15:30.999Z,1520658930.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:15:31.392Z,1520658931.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:15:31.788Z,1520658931.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:15:32.161Z,1520658932.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:15:32.583Z,1520658932.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:15:33.007Z,1520658933.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:15:33.365Z,1520658933.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:15:33.777Z,1520658933.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:15:34.192Z,1520658934.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:15:34.581Z,1520658934.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:15:34.973Z,1520658934.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:15:35.402Z,1520658935.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:15:35.769Z,1520658935.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:15:36.137Z,1520658936.137 [DAT](INFO): setting local address to 2
2018-03-10T05:15:36.192Z,1520658936.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:15:36.537Z,1520658936.537 [DAT](INFO): set local address to 2
2018-03-10T05:15:36.595Z,1520658936.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:15:36.976Z,1520658936.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:15:37.369Z,1520658937.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:15:37.802Z,1520658937.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:15:38.191Z,1520658938.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:15:38.580Z,1520658938.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:15:39.006Z,1520658939.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:15:39.369Z,1520658939.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:15:39.773Z,1520658939.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:15:40.199Z,1520658940.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:15:40.656Z,1520658940.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:15:41.023Z,1520658941.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:15:41.372Z,1520658941.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:15:41.762Z,1520658941.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:15:42.183Z,1520658942.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:15:42.610Z,1520658942.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:15:42.977Z,1520658942.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:15:43.365Z,1520658943.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:15:43.783Z,1520658943.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:15:44.196Z,1520658944.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:15:44.568Z,1520658944.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:15:44.975Z,1520658944.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:15:45.351Z,1520658945.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:15:45.769Z,1520658945.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:15:46.174Z,1520658946.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:15:46.569Z,1520658946.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:15:46.965Z,1520658946.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:15:47.388Z,1520658947.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:15:47.769Z,1520658947.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:15:48.180Z,1520658948.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:15:48.598Z,1520658948.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:15:48.968Z,1520658948.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:15:49.366Z,1520658949.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:15:49.720Z,1520658949.720 [NAL9602](INFO): Powering up NAL9602
2018-03-10T05:15:49.781Z,1520658949.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:15:50.169Z,1520658950.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:15:50.565Z,1520658950.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:15:50.962Z,1520658950.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:15:51.373Z,1520658951.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:15:51.765Z,1520658951.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:15:52.177Z,1520658952.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:15:52.576Z,1520658952.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:15:53.008Z,1520658953.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:15:53.402Z,1520658953.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:15:53.775Z,1520658953.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:15:54.166Z,1520658954.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:15:54.606Z,1520658954.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:15:54.961Z,1520658954.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:15:55.366Z,1520658955.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:15:55.775Z,1520658955.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:15:56.173Z,1520658956.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:15:56.615Z,1520658956.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:15:56.992Z,1520658956.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:15:57.365Z,1520658957.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:15:57.777Z,1520658957.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:15:58.177Z,1520658958.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:15:58.545Z,1520658958.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:15:58.971Z,1520658958.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:15:59.374Z,1520658959.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:15:59.745Z,1520658959.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:16:00.169Z,1520658960.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:16:00.585Z,1520658960.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:16:00.924Z,1520658960.924 [NAL9602](INFO): NAL9602 initialized
2018-03-10T05:16:00.969Z,1520658960.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:16:01.397Z,1520658961.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:16:01.783Z,1520658961.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:16:02.182Z,1520658962.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:16:02.606Z,1520658962.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:16:02.958Z,1520658962.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:16:03.364Z,1520658963.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:16:03.763Z,1520658963.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:16:04.167Z,1520658964.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:16:04.590Z,1520658964.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:16:04.967Z,1520658964.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:16:05.362Z,1520658965.362 [BPC1](ERROR): Bank B: No match for stick 5 serial number:1717 in the onboard configuration file.
2018-03-10T05:16:05.362Z,1520658965.362 [BPC1](ERROR): Failed to parse Bank B battery data
2018-03-10T05:16:05.362Z,1520658965.362 [BPC1] Data Fault, FailCount= 1
2018-03-10T05:16:05.362Z,1520658965.362 [BPC1](ERROR): Data Fault
2018-03-10T05:16:05.370Z,1520658965.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:16:05.511Z,1520658965.511 [CBIT](ERROR): Data Fault in component: BPC1
2018-03-10T05:16:05.760Z,1520658965.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:16:06.159Z,1520658966.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:16:06.569Z,1520658966.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:16:06.617Z,1520658966.617 [CBIT](INFO): Clearing failed state for component BPC1
2018-03-10T05:16:06.617Z,1520658966.617 [BPC1] No Fault, FailCount= 1
2018-03-10T05:16:07.013Z,1520658967.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:16:07.360Z,1520658967.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:16:07.769Z,1520658967.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:16:08.163Z,1520658968.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:16:08.561Z,1520658968.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:16:08.970Z,1520658968.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:16:09.369Z,1520658969.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:16:09.776Z,1520658969.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:16:10.177Z,1520658970.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:16:10.565Z,1520658970.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:16:10.968Z,1520658970.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:16:11.361Z,1520658971.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:16:11.760Z,1520658971.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:16:12.168Z,1520658972.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:16:12.600Z,1520658972.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:16:12.957Z,1520658972.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:16:13.362Z,1520658973.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:16:13.769Z,1520658973.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:16:14.171Z,1520658974.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:16:14.576Z,1520658974.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:16:14.971Z,1520658974.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:16:15.370Z,1520658975.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:16:15.769Z,1520658975.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:16:16.161Z,1520658976.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:16:16.555Z,1520658976.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:16:16.960Z,1520658976.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:16:17.365Z,1520658977.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:16:17.763Z,1520658977.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:16:18.160Z,1520658978.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:16:18.569Z,1520658978.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:16:18.963Z,1520658978.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:16:19.376Z,1520658979.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:16:19.770Z,1520658979.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:16:20.170Z,1520658980.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:16:20.582Z,1520658980.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:16:20.969Z,1520658980.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:16:21.365Z,1520658981.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:16:21.764Z,1520658981.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:16:22.162Z,1520658982.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:16:22.569Z,1520658982.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:16:22.962Z,1520658982.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:16:23.365Z,1520658983.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:16:23.761Z,1520658983.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:16:24.174Z,1520658984.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:16:24.606Z,1520658984.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:16:24.981Z,1520658984.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:16:25.404Z,1520658985.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:16:25.781Z,1520658985.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:16:26.162Z,1520658986.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:16:26.564Z,1520658986.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:16:26.975Z,1520658986.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:16:27.366Z,1520658987.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:16:27.762Z,1520658987.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:16:28.168Z,1520658988.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:16:28.561Z,1520658988.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:16:28.963Z,1520658988.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:16:29.365Z,1520658989.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:16:29.774Z,1520658989.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:16:30.186Z,1520658990.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:16:30.577Z,1520658990.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:16:30.974Z,1520658990.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:16:31.366Z,1520658991.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:16:31.768Z,1520658991.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:16:32.167Z,1520658992.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:16:32.562Z,1520658992.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:16:32.973Z,1520658992.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:16:33.361Z,1520658993.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:16:33.763Z,1520658993.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:16:34.165Z,1520658994.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:16:34.561Z,1520658994.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:16:34.979Z,1520658994.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:16:35.371Z,1520658995.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:16:35.782Z,1520658995.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:16:36.179Z,1520658996.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:16:36.590Z,1520658996.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:16:36.984Z,1520658996.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:16:37.352Z,1520658997.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:16:37.783Z,1520658997.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:16:38.192Z,1520658998.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:16:38.556Z,1520658998.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:16:38.961Z,1520658998.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:16:39.359Z,1520658999.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:16:39.764Z,1520658999.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:16:40.189Z,1520659000.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:16:40.574Z,1520659000.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:16:40.972Z,1520659000.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:16:41.371Z,1520659001.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:16:41.394Z,1520659001.394 [SBIT](IMPORTANT): Beginning Startup BIT
2018-03-10T05:16:41.402Z,1520659001.402 [CBIT](IMPORTANT): Beginning ground fault scan
2018-03-10T05:16:41.763Z,1520659001.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:16:42.169Z,1520659002.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:16:42.569Z,1520659002.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:16:42.961Z,1520659002.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:16:43.364Z,1520659003.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:16:43.879Z,1520659003.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:16:44.281Z,1520659004.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:16:44.674Z,1520659004.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:16:45.074Z,1520659005.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:16:45.482Z,1520659005.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:16:45.882Z,1520659005.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:16:46.283Z,1520659006.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:16:46.681Z,1520659006.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:16:47.074Z,1520659007.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:16:47.481Z,1520659007.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:16:47.875Z,1520659007.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:16:48.277Z,1520659008.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:16:48.681Z,1520659008.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:16:49.080Z,1520659009.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:16:49.497Z,1520659009.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:16:49.876Z,1520659009.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:16:50.278Z,1520659010.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:16:50.724Z,1520659010.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:16:51.087Z,1520659011.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:16:51.487Z,1520659011.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:16:51.892Z,1520659011.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:16:52.281Z,1520659012.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:16:52.475Z,1520659012.475 [CBIT](IMPORTANT): No ground fault detected
mA:
CHAN A0 (Batt): -0.007834
CHAN A1 (24V): -0.010854
CHAN A2 (12V): -0.000252
CHAN A3 (5V): -0.001457
CHAN B0 (3.3V): -0.000842
CHAN B1 (3.15aV): -0.001144
CHAN B2 (3.15bV): -0.000499
CHAN B3 (GND): -0.002319
OPEN: 0.003867
Full Scale Calc: 4.765 mA, -1.589 mA
2018-03-10T05:16:52.678Z,1520659012.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:16:53.076Z,1520659013.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:16:53.477Z,1520659013.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:16:53.881Z,1520659013.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:16:54.275Z,1520659014.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:16:54.688Z,1520659014.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:16:55.077Z,1520659015.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:16:55.480Z,1520659015.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:16:55.889Z,1520659015.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:16:56.282Z,1520659016.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:16:56.692Z,1520659016.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:16:57.257Z,1520659017.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:16:57.642Z,1520659017.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:16:58.053Z,1520659018.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:16:58.445Z,1520659018.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:16:58.842Z,1520659018.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:16:59.246Z,1520659019.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:16:59.641Z,1520659019.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:17:00.042Z,1520659020.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:17:00.443Z,1520659020.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:17:00.850Z,1520659020.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:17:01.250Z,1520659021.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:17:01.657Z,1520659021.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:17:02.083Z,1520659022.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:17:02.442Z,1520659022.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:17:02.850Z,1520659022.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:17:03.253Z,1520659023.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:17:03.644Z,1520659023.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:17:04.049Z,1520659024.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:17:04.448Z,1520659024.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:17:04.840Z,1520659024.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:17:05.249Z,1520659025.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:17:05.656Z,1520659025.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:17:06.056Z,1520659026.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:17:06.446Z,1520659026.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:17:06.847Z,1520659026.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:17:07.251Z,1520659027.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:17:07.646Z,1520659027.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:17:08.030Z,1520659028.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:17:08.454Z,1520659028.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:17:08.858Z,1520659028.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:17:09.244Z,1520659029.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:17:09.651Z,1520659029.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:17:10.048Z,1520659030.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:17:10.452Z,1520659030.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:17:10.849Z,1520659030.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:17:11.255Z,1520659031.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:17:11.653Z,1520659031.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:17:12.048Z,1520659032.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:17:12.431Z,1520659032.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:17:12.854Z,1520659032.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:17:13.253Z,1520659033.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:17:13.638Z,1520659033.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:17:14.058Z,1520659034.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:17:14.459Z,1520659034.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:17:14.868Z,1520659034.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:17:15.240Z,1520659035.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:17:15.673Z,1520659035.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:17:16.038Z,1520659036.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:17:16.437Z,1520659036.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:17:16.837Z,1520659036.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:17:17.272Z,1520659037.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:17:17.664Z,1520659037.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:17:18.042Z,1520659038.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:17:18.440Z,1520659038.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:17:18.840Z,1520659038.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:17:19.246Z,1520659039.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:17:19.641Z,1520659039.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:17:20.043Z,1520659040.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:17:20.449Z,1520659040.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:17:20.869Z,1520659040.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:17:21.245Z,1520659041.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:17:21.651Z,1520659041.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:17:22.051Z,1520659042.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:17:22.446Z,1520659042.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:17:22.844Z,1520659042.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:17:23.253Z,1520659043.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:17:23.642Z,1520659043.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:17:24.148Z,1520659044.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:17:24.548Z,1520659044.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:17:24.948Z,1520659044.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:17:25.345Z,1520659045.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:17:25.757Z,1520659045.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:17:26.151Z,1520659046.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:17:26.551Z,1520659046.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:17:26.965Z,1520659046.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:17:27.353Z,1520659047.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:17:27.753Z,1520659047.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:17:28.169Z,1520659048.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:17:28.560Z,1520659048.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:17:28.949Z,1520659048.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:17:29.353Z,1520659049.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:17:29.765Z,1520659049.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:17:30.155Z,1520659050.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:17:30.565Z,1520659050.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:17:30.954Z,1520659050.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:17:31.348Z,1520659051.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:17:31.753Z,1520659051.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:17:32.149Z,1520659052.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:17:32.549Z,1520659052.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:17:32.948Z,1520659052.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:17:33.344Z,1520659053.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:17:33.748Z,1520659053.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:17:34.148Z,1520659054.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:17:34.553Z,1520659054.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:17:34.961Z,1520659054.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:17:35.365Z,1520659055.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:17:35.436Z,1520659055.436 [SBIT](IMPORTANT): SBIT PASSED
2018-03-10T05:17:35.763Z,1520659055.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:17:35.766Z,1520659055.766 [MissionManager](IMPORTANT): Started mission Startup
2018-03-10T05:17:35.766Z,1520659055.766 [Startup] Running Loop=1
2018-03-10T05:17:35.766Z,1520659055.766 [Startup](DEBUG): Aggregate::initialize Startup
2018-03-10T05:17:35.766Z,1520659055.766 [Startup:A.GoToSurface] Running Loop=1
2018-03-10T05:17:35.766Z,1520659055.766 [Startup:A.GoToSurface](DEBUG): Initialize GoToSurfaceComponent.
2018-03-10T05:17:35.767Z,1520659055.767 [Startup:A.GoToSurface](DEBUG): No depth rate setting specified. Using default value of nan m/s.
2018-03-10T05:17:35.768Z,1520659055.768 [Startup:A.GoToSurface](DEBUG): No pitch setting specified. Using default value of nan degrees.
2018-03-10T05:17:35.768Z,1520659055.768 [Startup:A.GoToSurface](DEBUG): No speed setting specified. Using default value of 1.000000 m/s.
2018-03-10T05:17:35.768Z,1520659055.768 [Startup:A.GoToSurface](DEBUG): No pitch timeout specified. Using default value of 30.000000 seconds.
2018-03-10T05:17:35.769Z,1520659055.769 [Startup:A.GoToSurface](DEBUG): No surface timeout specified. Using default value of 1000.000000 seconds.
2018-03-10T05:17:35.795Z,1520659055.795 [Startup:StartupSatComms] Running Loop=1
2018-03-10T05:17:35.795Z,1520659055.795 [Startup:StartupSatComms](DEBUG): Aggregate::initialize Startup:StartupSatComms
2018-03-10T05:17:35.795Z,1520659055.795 [Startup:StartupSatComms:A] Running Loop=1
2018-03-10T05:17:36.158Z,1520659056.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:17:36.162Z,1520659056.162 [Startup:StartupSatComms:A](DEBUG): Initialize ReadDataComponent to sense latitude_fix
2018-03-10T05:17:36.554Z,1520659056.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:17:36.938Z,1520659056.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:17:37.341Z,1520659057.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:17:37.745Z,1520659057.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:17:38.139Z,1520659058.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:17:38.544Z,1520659058.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:17:38.967Z,1520659058.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:17:39.380Z,1520659059.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:17:39.741Z,1520659059.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:17:40.154Z,1520659060.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:17:40.557Z,1520659060.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:17:40.984Z,1520659060.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:17:41.350Z,1520659061.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:17:41.750Z,1520659061.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:17:42.148Z,1520659062.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:17:42.546Z,1520659062.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:17:42.947Z,1520659062.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:17:43.348Z,1520659063.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:17:43.753Z,1520659063.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:17:44.148Z,1520659064.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:17:44.541Z,1520659064.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:17:44.949Z,1520659064.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:17:45.355Z,1520659065.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:17:45.754Z,1520659065.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:17:46.160Z,1520659066.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:17:46.565Z,1520659066.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:17:46.949Z,1520659066.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:17:47.348Z,1520659067.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:17:47.753Z,1520659067.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:17:48.153Z,1520659068.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:17:48.547Z,1520659068.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:17:48.949Z,1520659068.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:17:49.347Z,1520659069.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:17:49.748Z,1520659069.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:17:50.146Z,1520659070.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:17:50.558Z,1520659070.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:17:50.965Z,1520659070.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:17:51.365Z,1520659071.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:17:51.796Z,1520659071.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:17:52.153Z,1520659072.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:17:52.557Z,1520659072.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:17:52.949Z,1520659072.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:17:53.355Z,1520659073.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:17:53.764Z,1520659073.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:17:54.155Z,1520659074.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:17:54.556Z,1520659074.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:17:54.954Z,1520659074.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:17:55.360Z,1520659075.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:17:55.766Z,1520659075.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:17:56.165Z,1520659076.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:17:56.558Z,1520659076.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:17:56.965Z,1520659076.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:17:57.351Z,1520659077.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:17:57.733Z,1520659077.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:17:58.161Z,1520659078.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:17:58.538Z,1520659078.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:17:58.937Z,1520659078.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:17:59.345Z,1520659079.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:17:59.741Z,1520659079.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:18:00.144Z,1520659080.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:18:00.565Z,1520659080.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:18:00.972Z,1520659080.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:18:01.350Z,1520659081.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:18:01.754Z,1520659081.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:18:02.173Z,1520659082.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:18:02.545Z,1520659082.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:18:02.945Z,1520659082.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:18:03.346Z,1520659083.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:18:03.750Z,1520659083.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:18:04.179Z,1520659084.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:18:04.546Z,1520659084.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:18:04.947Z,1520659084.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:18:05.348Z,1520659085.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:18:05.746Z,1520659085.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:18:06.150Z,1520659086.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:18:06.557Z,1520659086.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:18:06.951Z,1520659086.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:18:07.350Z,1520659087.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:18:07.753Z,1520659087.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:18:08.148Z,1520659088.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:18:08.542Z,1520659088.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:18:08.947Z,1520659088.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:18:09.353Z,1520659089.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:18:09.741Z,1520659089.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:18:10.148Z,1520659090.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:18:10.546Z,1520659090.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:18:10.946Z,1520659090.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:18:11.360Z,1520659091.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:18:11.765Z,1520659091.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:18:12.155Z,1520659092.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:18:12.569Z,1520659092.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:18:12.952Z,1520659092.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:18:13.349Z,1520659093.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:18:13.753Z,1520659093.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:18:14.157Z,1520659094.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:18:14.557Z,1520659094.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:18:14.961Z,1520659094.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:18:15.361Z,1520659095.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:18:15.742Z,1520659095.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:18:16.169Z,1520659096.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:18:16.673Z,1520659096.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:18:16.974Z,1520659096.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:18:17.357Z,1520659097.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:18:17.757Z,1520659097.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:18:18.149Z,1520659098.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:18:18.546Z,1520659098.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:18:18.946Z,1520659098.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:18:19.343Z,1520659099.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:18:19.748Z,1520659099.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:18:20.153Z,1520659100.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:18:20.543Z,1520659100.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:18:20.957Z,1520659100.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:18:21.346Z,1520659101.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:18:21.756Z,1520659101.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:18:22.155Z,1520659102.155 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:18:22.155Z,1520659102.155 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 1
2018-03-10T05:18:22.155Z,1520659102.155 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-03-10T05:18:22.157Z,1520659102.157 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:18:22.157Z,1520659102.157 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 1
2018-03-10T05:18:22.157Z,1520659102.157 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-03-10T05:18:22.159Z,1520659102.159 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:18:22.159Z,1520659102.159 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 1
2018-03-10T05:18:22.159Z,1520659102.159 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-10T05:18:22.255Z,1520659102.255 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-03-10T05:18:22.255Z,1520659102.255 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-03-10T05:18:22.256Z,1520659102.256 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-10T05:18:22.639Z,1520659102.639 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-03-10T05:18:22.639Z,1520659102.639 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 1
2018-03-10T05:18:22.639Z,1520659102.639 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-03-10T05:18:22.640Z,1520659102.640 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 1
2018-03-10T05:18:22.640Z,1520659102.640 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-10T05:18:22.640Z,1520659102.640 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 1
2018-03-10T05:18:22.957Z,1520659102.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-03-10T05:18:22.957Z,1520659102.957 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-03-10T05:18:22.958Z,1520659102.958 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-03-10T05:18:22.958Z,1520659102.958 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-03-10T05:18:22.959Z,1520659102.959 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-03-10T05:18:22.959Z,1520659102.959 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-03-10T05:18:22.959Z,1520659102.959 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-10T05:18:22.960Z,1520659102.960 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-10T05:18:22.960Z,1520659102.960 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-10T05:18:23.352Z,1520659103.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-03-10T05:18:23.353Z,1520659103.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:18:23.732Z,1520659103.732 [BPC1](ERROR): Failed to receive battery data
2018-03-10T05:18:23.732Z,1520659103.732 [BPC1] Communications Fault, FailCount= 1
2018-03-10T05:18:23.732Z,1520659103.732 [BPC1](ERROR): Communications Fault
2018-03-10T05:18:23.774Z,1520659103.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-03-10T05:18:23.776Z,1520659103.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:18:23.863Z,1520659103.863 [CBIT](ERROR): Communications Fault in component: BPC1
2018-03-10T05:18:24.160Z,1520659104.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-03-10T05:18:24.161Z,1520659104.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:18:24.538Z,1520659104.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-03-10T05:18:24.559Z,1520659104.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:18:24.940Z,1520659104.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-03-10T05:18:24.941Z,1520659104.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:18:25.043Z,1520659105.043 [CBIT](INFO): Clearing failed state for component BPC1
2018-03-10T05:18:25.043Z,1520659105.043 [BPC1] No Fault, FailCount= 1
2018-03-10T05:18:25.403Z,1520659105.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-03-10T05:18:25.404Z,1520659105.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:18:25.740Z,1520659105.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-03-10T05:18:25.741Z,1520659105.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:18:26.137Z,1520659106.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-03-10T05:18:26.137Z,1520659106.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:18:26.537Z,1520659106.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-03-10T05:18:26.538Z,1520659106.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:18:26.963Z,1520659106.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-03-10T05:18:26.964Z,1520659106.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:18:27.367Z,1520659107.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-03-10T05:18:27.368Z,1520659107.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:18:27.765Z,1520659107.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-03-10T05:18:27.766Z,1520659107.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:18:28.166Z,1520659108.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-03-10T05:18:28.171Z,1520659108.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:18:28.548Z,1520659108.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-03-10T05:18:28.549Z,1520659108.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:18:28.940Z,1520659108.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-03-10T05:18:28.941Z,1520659108.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:18:29.352Z,1520659109.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-03-10T05:18:29.353Z,1520659109.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:18:29.747Z,1520659109.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-03-10T05:18:29.748Z,1520659109.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:18:30.144Z,1520659110.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-03-10T05:18:30.145Z,1520659110.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:18:30.575Z,1520659110.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-03-10T05:18:30.576Z,1520659110.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:18:30.948Z,1520659110.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-03-10T05:18:30.949Z,1520659110.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:18:31.342Z,1520659111.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-03-10T05:18:31.343Z,1520659111.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:18:31.746Z,1520659111.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-03-10T05:18:31.747Z,1520659111.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:18:32.154Z,1520659112.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-03-10T05:18:32.155Z,1520659112.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:18:32.553Z,1520659112.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-03-10T05:18:32.554Z,1520659112.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:18:32.954Z,1520659112.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-03-10T05:18:32.955Z,1520659112.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:18:33.353Z,1520659113.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-03-10T05:18:33.354Z,1520659113.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:18:33.741Z,1520659113.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-03-10T05:18:33.742Z,1520659113.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:18:34.156Z,1520659114.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-03-10T05:18:34.156Z,1520659114.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:18:34.545Z,1520659114.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-03-10T05:18:34.546Z,1520659114.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:18:34.941Z,1520659114.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-03-10T05:18:34.942Z,1520659114.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:18:35.361Z,1520659115.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-03-10T05:18:35.362Z,1520659115.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:18:35.748Z,1520659115.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-03-10T05:18:35.749Z,1520659115.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:18:36.148Z,1520659116.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-03-10T05:18:36.149Z,1520659116.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:18:36.152Z,1520659116.152 [Startup:StartupSatComms:A](INFO): Timed out from 2018-03-10T05:17:35.8Z
2018-03-10T05:18:36.152Z,1520659116.152 [Startup:StartupSatComms:A] Stopped
2018-03-10T05:18:36.152Z,1520659116.152 [Startup:StartupSatComms:B] Running Loop=1
2018-03-10T05:18:36.551Z,1520659116.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-03-10T05:18:36.552Z,1520659116.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:18:36.556Z,1520659116.556 [Startup:StartupSatComms:B](DEBUG): Initialize ReadDataComponent to sense platform_communications
2018-03-10T05:18:36.956Z,1520659116.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-03-10T05:18:36.957Z,1520659116.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:18:37.358Z,1520659117.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-03-10T05:18:37.359Z,1520659117.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:18:37.758Z,1520659117.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-03-10T05:18:37.760Z,1520659117.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:18:38.158Z,1520659118.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-03-10T05:18:38.160Z,1520659118.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:18:38.558Z,1520659118.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-03-10T05:18:38.559Z,1520659118.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:18:38.953Z,1520659118.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-03-10T05:18:38.953Z,1520659118.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:18:39.352Z,1520659119.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-03-10T05:18:39.353Z,1520659119.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:18:39.749Z,1520659119.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-03-10T05:18:39.750Z,1520659119.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:18:40.157Z,1520659120.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-03-10T05:18:40.158Z,1520659120.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:18:40.556Z,1520659120.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2018-03-10T05:18:40.557Z,1520659120.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:18:40.950Z,1520659120.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2018-03-10T05:18:40.951Z,1520659120.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:18:41.365Z,1520659121.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2018-03-10T05:18:41.366Z,1520659121.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:18:41.764Z,1520659121.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2018-03-10T05:18:41.765Z,1520659121.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:18:42.136Z,1520659122.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 20.0 s old, using for 20.0 s.
2018-03-10T05:18:42.137Z,1520659122.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:18:42.570Z,1520659122.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:18:42.978Z,1520659122.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:18:43.353Z,1520659123.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:18:43.754Z,1520659123.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:18:44.157Z,1520659124.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:18:44.553Z,1520659124.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:18:47.689Z,1520659127.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:18:47.849Z,1520659127.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:18:48.250Z,1520659128.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:18:48.594Z,1520659128.594 [DataOverHttps](INFO): setting available, lastComms_.elapsed()=0.004662
2018-03-10T05:18:48.660Z,1520659128.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:18:49.158Z,1520659129.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:18:49.437Z,1520659129.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:18:52.656Z,1520659132.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:18:52.823Z,1520659132.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:18:53.159Z,1520659133.159 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20180310T030631/Courier0052.lzma
2018-03-10T05:18:53.210Z,1520659133.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:18:53.606Z,1520659133.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:18:53.953Z,1520659133.953 [DataOverHttps](INFO): Moved sent file to Logs/20180310T030631/Courier0052.lzma.bak
2018-03-10T05:18:53.953Z,1520659133.953 [DataOverHttps](INFO): SBD MOMSN=8001780
2018-03-10T05:18:54.013Z,1520659134.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:18:54.660Z,1520659134.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:18:54.813Z,1520659134.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:18:57.915Z,1520659137.915 [BPC1](FAULT): Failed to initialize
2018-03-10T05:18:57.916Z,1520659137.916 [BPC1] Communications Fault, FailCount= 2
2018-03-10T05:18:57.916Z,1520659137.916 [BPC1](ERROR): Communications Fault
2018-03-10T05:18:57.954Z,1520659137.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:18:58.035Z,1520659138.035 [CBIT](ERROR): Communications Fault in component: BPC1
2018-03-10T05:18:58.131Z,1520659138.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:18:58.509Z,1520659138.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:18:58.907Z,1520659138.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:18:58.987Z,1520659138.987 [CBIT](INFO): Clearing failed state for component BPC1
2018-03-10T05:18:58.987Z,1520659138.987 [BPC1] No Fault, FailCount= 2
2018-03-10T05:18:59.357Z,1520659139.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:18:59.695Z,1520659139.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:19:00.099Z,1520659140.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:19:03.213Z,1520659143.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:19:03.308Z,1520659143.308 [DataOverHttps](INFO): Sending 223 bytes from file Logs/20180310T030631/Express0053.lzma
2018-03-10T05:19:03.393Z,1520659143.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:19:03.763Z,1520659143.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:19:04.162Z,1520659144.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:19:04.509Z,1520659144.509 [DataOverHttps](INFO): Moved sent file to Logs/20180310T030631/Express0053.lzma.bak
2018-03-10T05:19:04.509Z,1520659144.509 [DataOverHttps](INFO): SBD MOMSN=8001782
2018-03-10T05:19:04.563Z,1520659144.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:19:05.245Z,1520659145.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:19:05.400Z,1520659145.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:19:05.794Z,1520659145.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:19:08.907Z,1520659148.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:19:09.061Z,1520659149.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:19:09.463Z,1520659149.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:19:09.856Z,1520659149.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:19:10.252Z,1520659150.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:19:10.649Z,1520659150.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:19:11.053Z,1520659151.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:19:11.437Z,1520659151.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:19:11.834Z,1520659151.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:19:12.238Z,1520659152.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:19:12.635Z,1520659152.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:19:15.765Z,1520659155.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:19:15.924Z,1520659155.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:19:16.273Z,1520659156.273 [DataOverHttps](INFO): Sending 566 bytes from file Logs/20180310T051512/Express0001.lzma
2018-03-10T05:19:16.336Z,1520659156.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:19:16.724Z,1520659156.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:19:17.065Z,1520659157.065 [DataOverHttps](INFO): Moved sent file to Logs/20180310T051512/Express0001.lzma.bak
2018-03-10T05:19:17.065Z,1520659157.065 [DataOverHttps](INFO): SBD MOMSN=8001789
2018-03-10T05:19:17.133Z,1520659157.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:19:17.779Z,1520659157.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:19:17.783Z,1520659157.783 [Startup:StartupSatComms:B] Stopped
2018-03-10T05:19:17.783Z,1520659157.783 [Startup:StartupSatComms](INFO): Completed Startup:StartupSatComms
2018-03-10T05:19:17.783Z,1520659157.783 [Startup:StartupSatComms] Stopped
2018-03-10T05:19:17.783Z,1520659157.783 [Startup:StartupSatComms](DEBUG): Aggregate::uninitialize Startup:StartupSatComms
2018-03-10T05:19:17.785Z,1520659157.785 [Startup](INFO): Completed Startup
2018-03-10T05:19:17.785Z,1520659157.785 [MissionManager](INFO): Startup is completed.
2018-03-10T05:19:17.785Z,1520659157.785 [MissionManager](INFO): Uninitializing Mission Startup
2018-03-10T05:19:17.786Z,1520659157.786 [Startup] Stopped
2018-03-10T05:19:17.786Z,1520659157.786 [Startup](DEBUG): Aggregate::uninitialize Startup
2018-03-10T05:19:17.786Z,1520659157.786 [Startup:A.GoToSurface] Stopped
2018-03-10T05:19:17.786Z,1520659157.786 [Startup:A.GoToSurface](DEBUG): Uninitialize GoToSurfaceComponent.
2018-03-10T05:19:17.914Z,1520659157.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:19:17.920Z,1520659157.920 [MissionManager](IMPORTANT): Started mission Default
2018-03-10T05:19:17.921Z,1520659157.921 [Default] Running Loop=1
2018-03-10T05:19:17.921Z,1520659157.921 [Default](DEBUG): Aggregate::initialize Default
2018-03-10T05:19:17.921Z,1520659157.921 [Default:B.GoToSurface] Running Loop=1
2018-03-10T05:19:17.921Z,1520659157.921 [Default:B.GoToSurface](DEBUG): Initialize GoToSurfaceComponent.
2018-03-10T05:19:17.921Z,1520659157.921 [Default:B.GoToSurface](DEBUG): No depth rate setting specified. Using default value of nan m/s.
2018-03-10T05:19:17.921Z,1520659157.921 [Default:B.GoToSurface](DEBUG): No pitch setting specified. Using default value of nan degrees.
2018-03-10T05:19:17.922Z,1520659157.922 [Default:B.GoToSurface](DEBUG): No speed setting specified. Using default value of 1.000000 m/s.
2018-03-10T05:19:17.922Z,1520659157.922 [Default:B.GoToSurface](DEBUG): No pitch timeout specified. Using default value of 30.000000 seconds.
2018-03-10T05:19:17.922Z,1520659157.922 [Default:B.GoToSurface](DEBUG): No surface timeout specified. Using default value of 1000.000000 seconds.
2018-03-10T05:19:17.927Z,1520659157.927 [Default:A.Wait] Running Loop=1
2018-03-10T05:19:17.927Z,1520659157.927 [Default:A.Wait](DEBUG): Initialize Wait Component.
2018-03-10T05:19:18.331Z,1520659158.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:19:21.443Z,1520659161.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:19:21.601Z,1520659161.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:19:22.001Z,1520659162.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:19:22.400Z,1520659162.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:19:22.778Z,1520659162.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:19:23.189Z,1520659163.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:19:23.591Z,1520659163.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:19:23.991Z,1520659163.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:19:24.366Z,1520659164.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:19:24.773Z,1520659164.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:19:25.170Z,1520659165.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:19:25.593Z,1520659165.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:19:25.970Z,1520659165.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:19:26.399Z,1520659166.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:19:26.852Z,1520659166.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:19:27.201Z,1520659167.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:19:27.595Z,1520659167.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:19:27.977Z,1520659167.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:19:28.377Z,1520659168.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:19:28.773Z,1520659168.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:19:29.177Z,1520659169.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:19:29.567Z,1520659169.567 [BPC1](FAULT): Failed to initialize
2018-03-10T05:19:29.567Z,1520659169.567 [BPC1] Communications Fault, FailCount= 3
2018-03-10T05:19:29.567Z,1520659169.567 [BPC1](ERROR): Communications Fault
2018-03-10T05:19:29.574Z,1520659169.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:19:29.667Z,1520659169.667 [CBIT](ERROR): Communications Fault in component: BPC1
2018-03-10T05:19:29.980Z,1520659169.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:19:30.378Z,1520659170.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:19:30.777Z,1520659170.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:19:30.859Z,1520659170.859 [CBIT](INFO): Clearing failed state for component BPC1
2018-03-10T05:19:30.859Z,1520659170.859 [BPC1] No Fault, FailCount= 3
2018-03-10T05:19:31.232Z,1520659171.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:19:31.236Z,1520659171.236 [Default:A.Wait](INFO): Done Waiting.
2018-03-10T05:19:31.236Z,1520659171.236 [Default:A.Wait] Stopped
2018-03-10T05:19:31.236Z,1520659171.236 [Default:A.Wait](DEBUG): Uninitialize Wait Component.
2018-03-10T05:19:31.582Z,1520659171.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:19:31.586Z,1520659171.586 [Default:CheckIn] Running Loop=1
2018-03-10T05:19:31.586Z,1520659171.586 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-03-10T05:19:31.586Z,1520659171.586 [Default:CheckIn:Read_GPS] Running Loop=1
2018-03-10T05:19:31.982Z,1520659171.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:19:31.986Z,1520659171.986 [Default:CheckIn:Read_GPS](DEBUG): Initialize ReadDataComponent to sense time_fix
2018-03-10T05:19:32.384Z,1520659172.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:19:32.782Z,1520659172.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:19:33.186Z,1520659173.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:19:33.581Z,1520659173.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:19:33.977Z,1520659173.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:19:34.385Z,1520659174.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:19:34.773Z,1520659174.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:19:35.177Z,1520659175.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:19:35.578Z,1520659175.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:19:36.009Z,1520659176.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:19:36.377Z,1520659176.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:19:36.782Z,1520659176.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:19:37.182Z,1520659177.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:19:37.582Z,1520659177.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:19:37.982Z,1520659177.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:19:38.385Z,1520659178.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:19:38.777Z,1520659178.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:19:39.178Z,1520659179.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:19:39.581Z,1520659179.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:19:39.977Z,1520659179.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:19:40.378Z,1520659180.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:19:40.781Z,1520659180.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:19:41.177Z,1520659181.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:19:41.578Z,1520659181.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:19:41.982Z,1520659181.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:19:42.382Z,1520659182.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:19:42.786Z,1520659182.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:19:43.182Z,1520659183.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:19:43.585Z,1520659183.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:19:43.985Z,1520659183.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:19:44.373Z,1520659184.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:19:44.777Z,1520659184.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:19:45.179Z,1520659185.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:19:45.574Z,1520659185.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:19:45.978Z,1520659185.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:19:46.389Z,1520659186.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:19:46.781Z,1520659186.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:19:47.195Z,1520659187.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:19:47.598Z,1520659187.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:19:48.009Z,1520659188.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:19:48.414Z,1520659188.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:19:48.769Z,1520659188.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:19:49.166Z,1520659189.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:19:49.613Z,1520659189.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:19:49.970Z,1520659189.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:19:50.399Z,1520659190.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:19:50.773Z,1520659190.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:19:51.203Z,1520659191.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:19:51.570Z,1520659191.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:19:51.973Z,1520659191.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:19:52.402Z,1520659192.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:19:52.800Z,1520659192.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:19:53.203Z,1520659193.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:19:53.602Z,1520659193.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:19:53.977Z,1520659193.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:19:54.373Z,1520659194.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:19:54.774Z,1520659194.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:19:55.179Z,1520659195.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:19:55.578Z,1520659195.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:19:55.978Z,1520659195.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:19:56.375Z,1520659196.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:19:56.777Z,1520659196.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:19:57.178Z,1520659197.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:19:57.582Z,1520659197.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:19:57.989Z,1520659197.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:19:58.382Z,1520659198.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:19:58.781Z,1520659198.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:19:59.177Z,1520659199.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:19:59.585Z,1520659199.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:19:59.974Z,1520659199.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:20:00.389Z,1520659200.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:20:00.770Z,1520659200.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:20:01.173Z,1520659201.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:20:01.563Z,1520659201.563 [BPC1](FAULT): Failed to initialize
2018-03-10T05:20:01.563Z,1520659201.563 [BPC1] Communications Fault, FailCount= 4
2018-03-10T05:20:01.563Z,1520659201.563 [BPC1](ERROR): Communications Fault
2018-03-10T05:20:01.570Z,1520659201.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:20:01.647Z,1520659201.647 [CBIT](ERROR): Communications Fault in component: BPC1
2018-03-10T05:20:01.973Z,1520659201.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:20:02.369Z,1520659202.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:20:02.822Z,1520659202.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:20:02.895Z,1520659202.895 [CBIT](INFO): Clearing failed state for component BPC1
2018-03-10T05:20:02.895Z,1520659202.895 [BPC1] No Fault, FailCount= 4
2018-03-10T05:20:03.233Z,1520659203.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:20:03.586Z,1520659203.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:20:03.989Z,1520659203.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:20:04.373Z,1520659204.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:20:04.786Z,1520659204.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:20:05.177Z,1520659205.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:20:05.591Z,1520659205.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:20:05.977Z,1520659205.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:20:06.379Z,1520659206.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:20:06.781Z,1520659206.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:20:07.190Z,1520659207.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:20:07.588Z,1520659207.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:20:07.993Z,1520659207.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:20:08.387Z,1520659208.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:20:08.797Z,1520659208.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:20:09.192Z,1520659209.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:20:09.577Z,1520659209.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:20:09.979Z,1520659209.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:20:10.380Z,1520659210.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:20:10.776Z,1520659210.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:20:11.189Z,1520659211.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:20:11.590Z,1520659211.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:20:11.988Z,1520659211.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:20:12.387Z,1520659212.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:20:12.789Z,1520659212.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:20:13.201Z,1520659213.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:20:13.590Z,1520659213.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:20:13.993Z,1520659213.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:20:14.397Z,1520659214.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:20:14.786Z,1520659214.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:20:15.170Z,1520659215.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:20:15.593Z,1520659215.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:20:16.001Z,1520659216.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:20:16.374Z,1520659216.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:20:16.777Z,1520659216.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:20:17.177Z,1520659217.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:20:17.577Z,1520659217.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:20:17.981Z,1520659217.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:20:18.402Z,1520659218.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:20:21.508Z,1520659221.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:20:21.695Z,1520659221.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:20:22.073Z,1520659222.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:20:22.455Z,1520659222.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:20:22.858Z,1520659222.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:20:23.255Z,1520659223.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:20:23.658Z,1520659223.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:20:24.054Z,1520659224.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:20:24.455Z,1520659224.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:20:24.856Z,1520659224.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:20:25.255Z,1520659225.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:20:25.655Z,1520659225.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:20:26.066Z,1520659226.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:20:26.462Z,1520659226.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:20:26.870Z,1520659226.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:20:27.285Z,1520659227.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:20:27.637Z,1520659227.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:20:28.061Z,1520659228.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:20:28.463Z,1520659228.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:20:28.864Z,1520659228.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:20:29.241Z,1520659229.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:20:29.668Z,1520659229.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:20:30.041Z,1520659230.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:20:30.444Z,1520659230.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:20:30.842Z,1520659230.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:20:31.273Z,1520659231.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:20:31.669Z,1520659231.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:20:32.069Z,1520659232.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:20:32.467Z,1520659232.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:20:32.841Z,1520659232.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:20:33.242Z,1520659233.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:20:33.675Z,1520659233.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:20:34.084Z,1520659234.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:20:34.449Z,1520659234.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:20:34.845Z,1520659234.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:20:35.245Z,1520659235.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:20:35.647Z,1520659235.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:20:36.053Z,1520659236.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:20:36.474Z,1520659236.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:20:36.879Z,1520659236.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:20:37.277Z,1520659237.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:20:37.680Z,1520659237.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:20:38.056Z,1520659238.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:20:38.480Z,1520659238.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:20:38.849Z,1520659238.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:20:39.260Z,1520659239.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:20:39.651Z,1520659239.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:20:40.049Z,1520659240.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:20:40.450Z,1520659240.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:20:40.851Z,1520659240.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:20:41.251Z,1520659241.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:20:41.661Z,1520659241.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:20:42.057Z,1520659242.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:20:42.458Z,1520659242.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:20:42.859Z,1520659242.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:20:43.254Z,1520659243.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:20:43.649Z,1520659243.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:20:44.051Z,1520659244.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:20:44.446Z,1520659244.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:20:44.848Z,1520659244.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:20:45.252Z,1520659245.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:20:45.659Z,1520659245.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:20:46.091Z,1520659246.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:20:46.450Z,1520659246.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:20:46.862Z,1520659246.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:20:47.264Z,1520659247.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:20:47.663Z,1520659247.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:20:48.069Z,1520659248.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:20:48.451Z,1520659248.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:20:48.869Z,1520659248.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:20:49.255Z,1520659249.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:20:49.676Z,1520659249.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:20:50.054Z,1520659250.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:20:50.453Z,1520659250.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:20:50.858Z,1520659250.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:20:51.255Z,1520659251.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:20:51.661Z,1520659251.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:20:52.065Z,1520659252.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:20:52.467Z,1520659252.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:20:52.861Z,1520659252.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:20:53.269Z,1520659253.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:20:53.649Z,1520659253.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:20:54.057Z,1520659254.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:20:54.461Z,1520659254.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:20:54.860Z,1520659254.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:20:55.254Z,1520659255.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:20:55.650Z,1520659255.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:20:56.056Z,1520659256.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:20:56.461Z,1520659256.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:20:56.861Z,1520659256.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:20:57.268Z,1520659257.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:20:57.667Z,1520659257.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:20:58.069Z,1520659258.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:20:58.480Z,1520659258.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:20:58.853Z,1520659258.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:20:59.255Z,1520659259.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:20:59.655Z,1520659259.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:21:00.053Z,1520659260.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:21:00.455Z,1520659260.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:21:00.876Z,1520659260.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:21:01.268Z,1520659261.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:21:01.641Z,1520659261.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:21:02.065Z,1520659262.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:21:02.469Z,1520659262.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:21:02.869Z,1520659262.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:21:03.266Z,1520659263.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:21:03.662Z,1520659263.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:21:04.041Z,1520659264.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:21:04.410Z,1520659264.410 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session.
2018-03-10T05:21:04.441Z,1520659264.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:21:04.862Z,1520659264.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:21:05.269Z,1520659265.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:21:05.641Z,1520659265.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:21:06.062Z,1520659266.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:21:06.442Z,1520659266.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:21:06.840Z,1520659266.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:21:07.241Z,1520659267.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:21:07.662Z,1520659267.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:21:08.077Z,1520659268.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:21:08.441Z,1520659268.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:21:08.858Z,1520659268.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:21:09.242Z,1520659269.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:21:09.666Z,1520659269.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:21:10.069Z,1520659270.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:21:10.473Z,1520659270.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:21:10.880Z,1520659270.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:21:11.246Z,1520659271.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:21:11.646Z,1520659271.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:21:12.072Z,1520659272.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:21:12.473Z,1520659272.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:21:12.876Z,1520659272.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:21:13.274Z,1520659273.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:21:13.653Z,1520659273.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:21:14.046Z,1520659274.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:21:14.445Z,1520659274.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:21:14.854Z,1520659274.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:21:15.247Z,1520659275.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:21:15.673Z,1520659275.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:21:16.055Z,1520659276.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:21:16.455Z,1520659276.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:21:16.849Z,1520659276.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:21:17.260Z,1520659277.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:21:17.663Z,1520659277.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:21:18.061Z,1520659278.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:21:18.469Z,1520659278.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:21:21.625Z,1520659281.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:21:21.789Z,1520659281.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:21:22.168Z,1520659282.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:21:22.570Z,1520659282.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:21:22.962Z,1520659282.962 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:21:22.963Z,1520659282.963 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 2
2018-03-10T05:21:22.963Z,1520659282.963 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-03-10T05:21:22.965Z,1520659282.965 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:21:22.965Z,1520659282.965 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 2
2018-03-10T05:21:22.965Z,1520659282.965 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-03-10T05:21:22.967Z,1520659282.967 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:21:22.967Z,1520659282.967 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 2
2018-03-10T05:21:22.967Z,1520659282.967 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-10T05:21:23.047Z,1520659283.047 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-03-10T05:21:23.047Z,1520659283.047 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-03-10T05:21:23.048Z,1520659283.048 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-10T05:21:23.464Z,1520659283.464 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-03-10T05:21:23.464Z,1520659283.464 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 2
2018-03-10T05:21:23.465Z,1520659283.465 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-03-10T05:21:23.465Z,1520659283.465 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 2
2018-03-10T05:21:23.465Z,1520659283.465 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-10T05:21:23.465Z,1520659283.465 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 2
2018-03-10T05:21:23.800Z,1520659283.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-03-10T05:21:23.800Z,1520659283.800 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-03-10T05:21:23.801Z,1520659283.801 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-03-10T05:21:23.802Z,1520659283.802 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-03-10T05:21:23.802Z,1520659283.802 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-03-10T05:21:23.803Z,1520659283.803 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-03-10T05:21:23.803Z,1520659283.803 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-10T05:21:23.804Z,1520659283.804 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-10T05:21:23.804Z,1520659283.804 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-10T05:21:24.182Z,1520659284.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-03-10T05:21:24.184Z,1520659284.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:21:24.553Z,1520659284.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-03-10T05:21:24.554Z,1520659284.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:21:24.953Z,1520659284.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-03-10T05:21:24.954Z,1520659284.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:21:25.380Z,1520659285.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-03-10T05:21:25.381Z,1520659285.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:21:25.784Z,1520659285.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-03-10T05:21:25.785Z,1520659285.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:21:26.187Z,1520659286.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-03-10T05:21:26.188Z,1520659286.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:21:26.553Z,1520659286.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-03-10T05:21:26.554Z,1520659286.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:21:26.953Z,1520659286.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-03-10T05:21:26.954Z,1520659286.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:21:27.381Z,1520659287.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-03-10T05:21:27.382Z,1520659287.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:21:27.784Z,1520659287.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-03-10T05:21:27.785Z,1520659287.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:21:28.162Z,1520659288.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-03-10T05:21:28.163Z,1520659288.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:21:28.550Z,1520659288.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-03-10T05:21:28.551Z,1520659288.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:21:28.952Z,1520659288.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-03-10T05:21:28.953Z,1520659288.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:21:29.384Z,1520659289.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-03-10T05:21:29.385Z,1520659289.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:21:29.784Z,1520659289.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-03-10T05:21:29.785Z,1520659289.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:21:30.183Z,1520659290.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-03-10T05:21:30.184Z,1520659290.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:21:30.553Z,1520659290.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-03-10T05:21:30.554Z,1520659290.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:21:30.960Z,1520659290.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-03-10T05:21:30.961Z,1520659290.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:21:31.382Z,1520659291.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-03-10T05:21:31.383Z,1520659291.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:21:31.783Z,1520659291.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-03-10T05:21:31.784Z,1520659291.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:21:32.182Z,1520659292.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-03-10T05:21:32.185Z,1520659292.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:21:32.560Z,1520659292.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-03-10T05:21:32.561Z,1520659292.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:21:33.006Z,1520659293.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-03-10T05:21:33.008Z,1520659293.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:21:33.408Z,1520659293.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-03-10T05:21:33.409Z,1520659293.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:21:33.795Z,1520659293.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-03-10T05:21:33.796Z,1520659293.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:21:34.187Z,1520659294.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-03-10T05:21:34.188Z,1520659294.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:21:34.558Z,1520659294.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-03-10T05:21:34.559Z,1520659294.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:21:34.964Z,1520659294.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-03-10T05:21:34.964Z,1520659294.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:21:35.394Z,1520659295.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-03-10T05:21:35.394Z,1520659295.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:21:35.768Z,1520659295.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-03-10T05:21:35.769Z,1520659295.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:21:36.162Z,1520659296.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-03-10T05:21:36.163Z,1520659296.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:21:36.558Z,1520659296.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-03-10T05:21:36.559Z,1520659296.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:21:36.961Z,1520659296.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-03-10T05:21:36.962Z,1520659296.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:21:37.362Z,1520659297.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-03-10T05:21:37.363Z,1520659297.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:21:37.762Z,1520659297.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-03-10T05:21:37.763Z,1520659297.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:21:38.163Z,1520659298.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-03-10T05:21:38.164Z,1520659298.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:21:38.562Z,1520659298.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-03-10T05:21:38.562Z,1520659298.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:21:38.961Z,1520659298.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-03-10T05:21:38.962Z,1520659298.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:21:39.372Z,1520659299.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-03-10T05:21:39.373Z,1520659299.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:21:39.762Z,1520659299.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-03-10T05:21:39.762Z,1520659299.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:21:40.172Z,1520659300.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-03-10T05:21:40.173Z,1520659300.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:21:40.562Z,1520659300.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-03-10T05:21:40.563Z,1520659300.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:21:40.965Z,1520659300.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-03-10T05:21:40.966Z,1520659300.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:21:41.365Z,1520659301.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2018-03-10T05:21:41.366Z,1520659301.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:21:41.773Z,1520659301.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2018-03-10T05:21:41.774Z,1520659301.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:21:42.165Z,1520659302.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2018-03-10T05:21:42.166Z,1520659302.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:21:42.558Z,1520659302.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2018-03-10T05:21:42.558Z,1520659302.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:21:42.958Z,1520659302.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 20.0 s old, using for 20.0 s.
2018-03-10T05:21:42.959Z,1520659302.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:21:43.370Z,1520659303.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:21:43.770Z,1520659303.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:21:44.170Z,1520659304.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:21:44.564Z,1520659304.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:21:44.977Z,1520659304.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:21:45.408Z,1520659305.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:21:45.770Z,1520659305.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:21:46.171Z,1520659306.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:21:46.584Z,1520659306.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:21:46.989Z,1520659306.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:21:47.414Z,1520659307.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:21:47.782Z,1520659307.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:21:48.195Z,1520659308.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:21:48.549Z,1520659308.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:21:48.974Z,1520659308.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:21:49.387Z,1520659309.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:21:49.794Z,1520659309.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:21:50.173Z,1520659310.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:21:50.574Z,1520659310.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:21:50.957Z,1520659310.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:21:51.381Z,1520659311.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:21:51.788Z,1520659311.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:21:52.178Z,1520659312.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:21:52.553Z,1520659312.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:21:52.949Z,1520659312.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:21:53.386Z,1520659313.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:21:53.785Z,1520659313.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:21:54.162Z,1520659314.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:21:54.553Z,1520659314.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:21:54.956Z,1520659314.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:21:55.388Z,1520659315.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:21:55.762Z,1520659315.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:21:56.190Z,1520659316.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:21:56.585Z,1520659316.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:21:56.963Z,1520659316.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:21:57.372Z,1520659317.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:21:57.770Z,1520659317.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:21:58.182Z,1520659318.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:21:58.608Z,1520659318.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:21:58.953Z,1520659318.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:21:59.366Z,1520659319.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:21:59.770Z,1520659319.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:22:00.163Z,1520659320.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:22:00.558Z,1520659320.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:22:00.969Z,1520659320.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:22:01.362Z,1520659321.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:22:01.762Z,1520659321.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:22:02.164Z,1520659322.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:22:02.560Z,1520659322.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:22:02.965Z,1520659322.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:22:03.363Z,1520659323.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:22:03.766Z,1520659323.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:22:04.165Z,1520659324.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:22:04.560Z,1520659324.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:22:04.962Z,1520659324.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:22:05.373Z,1520659325.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:22:05.767Z,1520659325.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:22:06.166Z,1520659326.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:22:06.558Z,1520659326.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:22:06.960Z,1520659326.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:22:07.372Z,1520659327.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:22:07.795Z,1520659327.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:22:08.166Z,1520659328.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:22:08.561Z,1520659328.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:22:08.957Z,1520659328.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:22:09.396Z,1520659329.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:22:09.801Z,1520659329.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:22:10.177Z,1520659330.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:22:10.560Z,1520659330.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:22:10.953Z,1520659330.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:22:11.370Z,1520659331.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:22:11.773Z,1520659331.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:22:12.166Z,1520659332.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:22:12.560Z,1520659332.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:22:12.965Z,1520659332.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:22:13.377Z,1520659333.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:22:13.772Z,1520659333.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:22:14.172Z,1520659334.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:22:14.562Z,1520659334.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:22:14.960Z,1520659334.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:22:15.372Z,1520659335.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:22:15.778Z,1520659335.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:22:16.177Z,1520659336.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:22:16.565Z,1520659336.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:22:16.969Z,1520659336.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:22:17.372Z,1520659337.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:22:17.772Z,1520659337.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:22:18.171Z,1520659338.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:22:18.568Z,1520659338.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:22:21.723Z,1520659341.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:22:21.877Z,1520659341.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:22:22.281Z,1520659342.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:22:22.675Z,1520659342.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:22:23.073Z,1520659343.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:22:23.463Z,1520659343.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:22:23.873Z,1520659343.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:22:24.265Z,1520659344.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:22:24.674Z,1520659344.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:22:25.078Z,1520659345.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:22:25.477Z,1520659345.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:22:25.864Z,1520659345.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:22:26.265Z,1520659346.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:22:26.665Z,1520659346.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:22:27.064Z,1520659347.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:22:27.481Z,1520659347.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:22:27.882Z,1520659347.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:22:28.274Z,1520659348.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:22:28.665Z,1520659348.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:22:29.065Z,1520659349.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:22:29.473Z,1520659349.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:22:29.868Z,1520659349.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:22:30.273Z,1520659350.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:22:30.676Z,1520659350.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:22:31.075Z,1520659351.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:22:31.475Z,1520659351.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:22:31.873Z,1520659351.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:22:32.266Z,1520659352.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:22:32.669Z,1520659352.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:22:33.074Z,1520659353.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:22:33.521Z,1520659353.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:22:33.874Z,1520659353.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:22:34.274Z,1520659354.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:22:34.669Z,1520659354.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:22:35.073Z,1520659355.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:22:35.468Z,1520659355.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:22:35.973Z,1520659355.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:22:36.267Z,1520659356.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:22:36.674Z,1520659356.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:22:37.075Z,1520659357.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:22:37.470Z,1520659357.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:22:37.873Z,1520659357.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:22:38.275Z,1520659358.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:22:38.666Z,1520659358.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:22:39.069Z,1520659359.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:22:39.476Z,1520659359.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:22:39.878Z,1520659359.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:22:40.278Z,1520659360.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:22:40.673Z,1520659360.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:22:41.069Z,1520659361.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:22:41.453Z,1520659361.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:22:41.871Z,1520659361.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:22:42.253Z,1520659362.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:22:42.677Z,1520659362.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:22:43.080Z,1520659363.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:22:43.477Z,1520659363.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:22:43.853Z,1520659363.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:22:44.254Z,1520659364.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:22:44.659Z,1520659364.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:22:45.109Z,1520659365.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:22:45.501Z,1520659365.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:22:45.874Z,1520659365.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:22:46.266Z,1520659366.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:22:46.662Z,1520659366.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:22:47.069Z,1520659367.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:22:47.461Z,1520659367.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:22:47.864Z,1520659367.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:22:48.265Z,1520659368.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:22:48.666Z,1520659368.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:22:49.091Z,1520659369.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:22:49.462Z,1520659369.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:22:49.862Z,1520659369.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:22:50.262Z,1520659370.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:22:50.662Z,1520659370.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:22:51.061Z,1520659371.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:22:51.467Z,1520659371.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:22:51.891Z,1520659371.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:22:52.266Z,1520659372.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:22:52.672Z,1520659372.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:22:53.073Z,1520659373.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:22:53.464Z,1520659373.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:22:53.865Z,1520659373.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:22:54.262Z,1520659374.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:22:54.677Z,1520659374.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:22:55.071Z,1520659375.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:22:55.470Z,1520659375.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:22:55.861Z,1520659375.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:22:56.269Z,1520659376.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:22:56.724Z,1520659376.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:22:57.081Z,1520659377.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:22:57.482Z,1520659377.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:22:57.870Z,1520659377.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:22:58.274Z,1520659378.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:22:58.676Z,1520659378.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:22:59.072Z,1520659379.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:22:59.479Z,1520659379.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:22:59.855Z,1520659379.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:23:00.256Z,1520659380.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:23:00.680Z,1520659380.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:23:01.084Z,1520659381.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:23:01.482Z,1520659381.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:23:01.854Z,1520659381.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:23:02.260Z,1520659382.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:23:02.684Z,1520659382.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:23:03.055Z,1520659383.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:23:03.482Z,1520659383.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:23:03.880Z,1520659383.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:23:04.280Z,1520659384.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:23:04.661Z,1520659384.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:23:05.065Z,1520659385.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:23:05.465Z,1520659385.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:23:05.862Z,1520659385.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:23:06.257Z,1520659386.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:23:06.686Z,1520659386.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:23:07.088Z,1520659387.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:23:07.494Z,1520659387.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:23:07.889Z,1520659387.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:23:08.257Z,1520659388.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:23:08.653Z,1520659388.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:23:09.061Z,1520659389.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:23:09.497Z,1520659389.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:23:09.931Z,1520659389.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:23:10.286Z,1520659390.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:23:10.653Z,1520659390.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:23:11.077Z,1520659391.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:23:11.453Z,1520659391.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:23:11.884Z,1520659391.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:23:12.253Z,1520659392.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:23:12.677Z,1520659392.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:23:13.080Z,1520659393.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:23:13.478Z,1520659393.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:23:13.861Z,1520659393.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:23:14.253Z,1520659394.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:23:14.661Z,1520659394.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:23:15.061Z,1520659395.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:23:15.481Z,1520659395.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:23:15.878Z,1520659395.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:23:16.282Z,1520659396.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:23:16.656Z,1520659396.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:23:17.054Z,1520659397.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:23:17.484Z,1520659397.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:23:17.860Z,1520659397.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:23:18.261Z,1520659398.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:23:18.685Z,1520659398.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:23:21.835Z,1520659401.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:23:22.009Z,1520659402.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:23:22.393Z,1520659402.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:23:22.793Z,1520659402.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:23:23.192Z,1520659403.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:23:23.601Z,1520659403.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:23:23.996Z,1520659403.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:23:24.401Z,1520659404.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:23:24.793Z,1520659404.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:23:25.173Z,1520659405.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:23:25.597Z,1520659405.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:23:25.973Z,1520659405.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:23:26.401Z,1520659406.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:23:26.801Z,1520659406.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:23:27.198Z,1520659407.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:23:27.574Z,1520659407.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:23:27.969Z,1520659407.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:23:28.398Z,1520659408.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:23:28.800Z,1520659408.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:23:29.198Z,1520659409.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:23:29.574Z,1520659409.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:23:29.973Z,1520659409.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:23:30.398Z,1520659410.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:23:30.798Z,1520659410.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:23:31.204Z,1520659411.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:23:31.601Z,1520659411.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:23:31.977Z,1520659411.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:23:32.404Z,1520659412.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:23:32.821Z,1520659412.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:23:33.213Z,1520659413.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:23:33.585Z,1520659413.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:23:33.977Z,1520659413.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:23:34.381Z,1520659414.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:23:34.780Z,1520659414.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:23:35.209Z,1520659415.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:23:35.609Z,1520659415.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:23:36.011Z,1520659416.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:23:36.409Z,1520659416.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:23:36.777Z,1520659416.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:23:37.176Z,1520659417.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:23:37.585Z,1520659417.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:23:37.977Z,1520659417.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:23:38.411Z,1520659418.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:23:38.809Z,1520659418.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:23:39.209Z,1520659419.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:23:39.577Z,1520659419.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:23:39.977Z,1520659419.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:23:40.377Z,1520659420.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:23:40.779Z,1520659420.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:23:41.177Z,1520659421.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:23:41.609Z,1520659421.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:23:42.009Z,1520659422.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:23:42.410Z,1520659422.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:23:42.782Z,1520659422.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:23:43.178Z,1520659423.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:23:43.583Z,1520659423.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:23:43.984Z,1520659423.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:23:44.411Z,1520659424.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:23:44.813Z,1520659424.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:23:45.189Z,1520659425.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:23:45.584Z,1520659425.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:23:45.980Z,1520659425.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:23:46.388Z,1520659426.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:23:46.813Z,1520659426.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:23:47.266Z,1520659427.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:23:47.613Z,1520659427.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:23:47.984Z,1520659427.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:23:48.393Z,1520659428.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:23:48.794Z,1520659428.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:23:49.183Z,1520659429.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:23:49.596Z,1520659429.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:23:50.012Z,1520659430.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:23:50.410Z,1520659430.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:23:50.866Z,1520659430.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:23:51.192Z,1520659431.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:23:51.590Z,1520659431.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:23:51.988Z,1520659431.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:23:52.405Z,1520659432.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:23:52.800Z,1520659432.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:23:53.200Z,1520659433.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:23:53.585Z,1520659433.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:23:53.990Z,1520659433.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:23:54.398Z,1520659434.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:23:54.801Z,1520659434.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:23:55.197Z,1520659435.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:23:55.588Z,1520659435.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:23:55.986Z,1520659435.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:23:56.405Z,1520659436.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:23:56.801Z,1520659436.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:23:57.205Z,1520659437.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:23:57.591Z,1520659437.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:23:57.988Z,1520659437.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:23:58.401Z,1520659438.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:23:58.797Z,1520659438.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:23:59.201Z,1520659439.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:23:59.585Z,1520659439.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:23:59.996Z,1520659439.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:24:00.413Z,1520659440.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:24:00.801Z,1520659440.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:24:01.202Z,1520659441.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:24:01.592Z,1520659441.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:24:01.994Z,1520659441.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:24:02.405Z,1520659442.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:24:02.802Z,1520659442.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:24:03.224Z,1520659443.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:24:03.577Z,1520659443.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:24:03.973Z,1520659443.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:24:04.381Z,1520659444.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:24:04.781Z,1520659444.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:24:05.177Z,1520659445.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:24:05.600Z,1520659445.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:24:06.009Z,1520659446.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:24:06.402Z,1520659446.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:24:06.805Z,1520659446.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:24:07.181Z,1520659447.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:24:07.581Z,1520659447.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:24:07.985Z,1520659447.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:24:08.411Z,1520659448.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:24:08.808Z,1520659448.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:24:09.208Z,1520659449.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:24:09.578Z,1520659449.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:24:09.981Z,1520659449.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:24:10.377Z,1520659450.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:24:10.778Z,1520659450.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:24:11.181Z,1520659451.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:24:11.611Z,1520659451.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:24:12.011Z,1520659452.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:24:12.387Z,1520659452.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:24:12.788Z,1520659452.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:24:13.214Z,1520659453.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:24:13.589Z,1520659453.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:24:13.983Z,1520659453.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:24:14.387Z,1520659454.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:24:14.791Z,1520659454.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:24:15.194Z,1520659455.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:24:15.621Z,1520659455.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:24:15.989Z,1520659455.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:24:16.397Z,1520659456.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:24:16.791Z,1520659456.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:24:17.197Z,1520659457.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:24:17.582Z,1520659457.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:24:17.986Z,1520659457.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:24:18.392Z,1520659458.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:24:18.791Z,1520659458.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:24:21.932Z,1520659461.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:24:22.077Z,1520659462.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:24:22.470Z,1520659462.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:24:22.870Z,1520659462.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:24:23.273Z,1520659463.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:24:23.682Z,1520659463.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:24:24.080Z,1520659464.080 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:24:24.080Z,1520659464.080 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 3
2018-03-10T05:24:24.080Z,1520659464.080 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-03-10T05:24:24.082Z,1520659464.082 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:24:24.082Z,1520659464.082 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 3
2018-03-10T05:24:24.082Z,1520659464.082 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-03-10T05:24:24.084Z,1520659464.084 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:24:24.084Z,1520659464.084 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 3
2018-03-10T05:24:24.084Z,1520659464.084 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-10T05:24:24.159Z,1520659464.159 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-03-10T05:24:24.159Z,1520659464.159 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-03-10T05:24:24.160Z,1520659464.160 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-10T05:24:24.568Z,1520659464.568 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-03-10T05:24:24.568Z,1520659464.568 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 3
2018-03-10T05:24:24.569Z,1520659464.569 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-03-10T05:24:24.569Z,1520659464.569 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 3
2018-03-10T05:24:24.569Z,1520659464.569 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-10T05:24:24.569Z,1520659464.569 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 3
2018-03-10T05:24:24.880Z,1520659464.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-03-10T05:24:24.880Z,1520659464.880 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-03-10T05:24:24.881Z,1520659464.881 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-03-10T05:24:24.881Z,1520659464.881 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-03-10T05:24:24.881Z,1520659464.881 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-03-10T05:24:24.882Z,1520659464.882 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-03-10T05:24:24.882Z,1520659464.882 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-10T05:24:24.882Z,1520659464.882 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-10T05:24:24.887Z,1520659464.887 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-10T05:24:25.264Z,1520659465.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-03-10T05:24:25.265Z,1520659465.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:24:25.696Z,1520659465.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-03-10T05:24:25.697Z,1520659465.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:24:26.068Z,1520659466.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-03-10T05:24:26.069Z,1520659466.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:24:26.490Z,1520659466.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-03-10T05:24:26.496Z,1520659466.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:24:26.874Z,1520659466.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-03-10T05:24:26.874Z,1520659466.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:24:27.274Z,1520659467.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-03-10T05:24:27.295Z,1520659467.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:24:27.668Z,1520659467.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-03-10T05:24:27.669Z,1520659467.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:24:28.094Z,1520659468.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-03-10T05:24:28.095Z,1520659468.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:24:28.465Z,1520659468.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-03-10T05:24:28.466Z,1520659468.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:24:28.867Z,1520659468.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-03-10T05:24:28.868Z,1520659468.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:24:29.272Z,1520659469.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-03-10T05:24:29.273Z,1520659469.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:24:29.670Z,1520659469.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-03-10T05:24:29.672Z,1520659469.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:24:30.095Z,1520659470.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-03-10T05:24:30.096Z,1520659470.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:24:30.499Z,1520659470.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-03-10T05:24:30.500Z,1520659470.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:24:30.947Z,1520659470.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.9 s old, using for 20.0 s.
2018-03-10T05:24:30.948Z,1520659470.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:24:31.266Z,1520659471.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-03-10T05:24:31.267Z,1520659471.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:24:31.665Z,1520659471.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-03-10T05:24:31.666Z,1520659471.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:24:31.670Z,1520659471.670 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-03-10T05:19:31.6Z
2018-03-10T05:24:31.670Z,1520659471.670 [Default:CheckIn:Read_GPS] Stopped
2018-03-10T05:24:31.670Z,1520659471.670 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-03-10T05:24:32.073Z,1520659472.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-03-10T05:24:32.074Z,1520659472.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:24:32.077Z,1520659472.077 [Default:CheckIn:Read_Iridium](DEBUG): Initialize ReadDataComponent to sense platform_communications
2018-03-10T05:24:34.552Z,1520659474.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.5 s old, using for 20.0 s.
2018-03-10T05:24:34.553Z,1520659474.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:24:34.712Z,1520659474.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.6 s old, using for 20.0 s.
2018-03-10T05:24:34.713Z,1520659474.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:24:35.110Z,1520659475.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.0 s old, using for 20.0 s.
2018-03-10T05:24:35.111Z,1520659475.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:24:35.506Z,1520659475.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.4 s old, using for 20.0 s.
2018-03-10T05:24:35.508Z,1520659475.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:24:38.659Z,1520659478.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.6 s old, using for 20.0 s.
2018-03-10T05:24:38.660Z,1520659478.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:24:38.824Z,1520659478.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.7 s old, using for 20.0 s.
2018-03-10T05:24:38.825Z,1520659478.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:24:39.159Z,1520659479.159 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20180310T051512/Courier0004.lzma
2018-03-10T05:24:39.222Z,1520659479.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.1 s old, using for 20.0 s.
2018-03-10T05:24:39.223Z,1520659479.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:24:39.616Z,1520659479.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.5 s old, using for 20.0 s.
2018-03-10T05:24:39.617Z,1520659479.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:24:39.957Z,1520659479.957 [DataOverHttps](INFO): Moved sent file to Logs/20180310T051512/Courier0004.lzma.bak
2018-03-10T05:24:39.957Z,1520659479.957 [DataOverHttps](INFO): SBD MOMSN=8001849
2018-03-10T05:24:40.026Z,1520659480.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.9 s old, using for 20.0 s.
2018-03-10T05:24:40.027Z,1520659480.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:24:40.673Z,1520659480.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.6 s old, using for 20.0 s.
2018-03-10T05:24:40.674Z,1520659480.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:24:40.824Z,1520659480.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.7 s old, using for 20.0 s.
2018-03-10T05:24:40.825Z,1520659480.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:24:41.222Z,1520659481.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.1 s old, using for 20.0 s.
2018-03-10T05:24:41.224Z,1520659481.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:24:44.330Z,1520659484.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:24:44.512Z,1520659484.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:24:44.912Z,1520659484.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:24:45.309Z,1520659485.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:24:45.690Z,1520659485.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:24:46.087Z,1520659486.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:24:46.516Z,1520659486.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:24:49.628Z,1520659489.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:24:49.789Z,1520659489.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:24:50.120Z,1520659490.120 [DataOverHttps](INFO): Sending 219 bytes from file Logs/20180310T051512/Express0005.lzma
2018-03-10T05:24:50.177Z,1520659490.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:24:50.565Z,1520659490.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:24:50.917Z,1520659490.917 [DataOverHttps](INFO): Moved sent file to Logs/20180310T051512/Express0005.lzma.bak
2018-03-10T05:24:50.917Z,1520659490.917 [DataOverHttps](INFO): SBD MOMSN=8001851
2018-03-10T05:24:50.000Z,1520659491.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:24:51.666Z,1520659491.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:24:51.669Z,1520659491.669 [Default:CheckIn:Read_Iridium] Stopped
2018-03-10T05:24:51.669Z,1520659491.669 [Default:CheckIn:C.Wait] Running Loop=1
2018-03-10T05:24:51.669Z,1520659491.669 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-03-10T05:24:51.832Z,1520659491.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:24:52.230Z,1520659492.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:24:55.333Z,1520659495.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:24:55.477Z,1520659495.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:24:55.886Z,1520659495.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:24:56.286Z,1520659496.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:24:56.686Z,1520659496.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:24:57.066Z,1520659497.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:24:57.466Z,1520659497.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:24:57.862Z,1520659497.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:24:58.266Z,1520659498.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:24:58.688Z,1520659498.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:24:59.089Z,1520659499.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:24:59.487Z,1520659499.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:24:59.866Z,1520659499.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:25:00.265Z,1520659500.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:25:00.667Z,1520659500.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:25:01.089Z,1520659501.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:25:01.474Z,1520659501.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:25:01.894Z,1520659501.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:25:02.299Z,1520659502.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:25:02.670Z,1520659502.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:25:03.072Z,1520659503.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:25:03.471Z,1520659503.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:25:03.879Z,1520659503.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:25:04.301Z,1520659504.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:25:04.675Z,1520659504.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:25:05.079Z,1520659505.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:25:05.475Z,1520659505.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:25:05.877Z,1520659505.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:25:06.272Z,1520659506.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:25:06.672Z,1520659506.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:25:07.070Z,1520659507.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:25:07.475Z,1520659507.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:25:07.885Z,1520659507.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:25:08.290Z,1520659508.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:25:08.677Z,1520659508.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:25:09.077Z,1520659509.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:25:09.476Z,1520659509.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:25:09.880Z,1520659509.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:25:10.277Z,1520659510.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:25:10.679Z,1520659510.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:25:11.081Z,1520659511.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:25:11.474Z,1520659511.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:25:11.861Z,1520659511.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:25:12.261Z,1520659512.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:25:12.658Z,1520659512.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:25:13.064Z,1520659513.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:25:13.546Z,1520659513.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:25:13.874Z,1520659513.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:25:14.280Z,1520659514.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:25:14.669Z,1520659514.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:25:15.061Z,1520659515.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:25:15.477Z,1520659515.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:25:15.873Z,1520659515.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:25:16.275Z,1520659516.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:25:16.690Z,1520659516.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:25:17.105Z,1520659517.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:25:17.482Z,1520659517.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:25:17.890Z,1520659517.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:25:18.275Z,1520659518.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:25:18.673Z,1520659518.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:25:19.077Z,1520659519.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:25:19.482Z,1520659519.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:25:19.882Z,1520659519.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:25:20.289Z,1520659520.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:25:20.697Z,1520659520.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:25:21.077Z,1520659521.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:25:21.485Z,1520659521.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:25:21.879Z,1520659521.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:25:21.963Z,1520659521.963 [CBIT](DEBUG): EFC running - data check-sum false
2018-03-10T05:25:22.261Z,1520659522.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:25:22.687Z,1520659522.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:25:23.086Z,1520659523.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:25:23.480Z,1520659523.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:25:23.858Z,1520659523.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:25:24.262Z,1520659524.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:25:24.663Z,1520659524.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:25:25.063Z,1520659525.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:25:25.483Z,1520659525.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:25:25.882Z,1520659525.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:25:26.284Z,1520659526.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:25:26.685Z,1520659526.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:25:27.064Z,1520659527.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:25:27.465Z,1520659527.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:25:27.885Z,1520659527.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:25:28.261Z,1520659528.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:25:28.699Z,1520659528.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:25:29.086Z,1520659529.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:25:29.492Z,1520659529.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:25:29.885Z,1520659529.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:25:30.273Z,1520659530.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:25:30.665Z,1520659530.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:25:31.072Z,1520659531.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:25:31.495Z,1520659531.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:25:31.894Z,1520659531.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:25:32.294Z,1520659532.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:25:32.665Z,1520659532.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:25:33.065Z,1520659533.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:25:33.471Z,1520659533.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:25:33.897Z,1520659533.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:25:34.265Z,1520659534.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:25:34.678Z,1520659534.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:25:35.078Z,1520659535.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:25:35.478Z,1520659535.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:25:35.866Z,1520659535.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:25:36.265Z,1520659536.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:25:36.666Z,1520659536.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:25:37.076Z,1520659537.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:25:37.499Z,1520659537.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:25:37.878Z,1520659537.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:25:38.278Z,1520659538.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:25:38.665Z,1520659538.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:25:39.066Z,1520659539.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:25:39.467Z,1520659539.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:25:39.867Z,1520659539.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:25:40.265Z,1520659540.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:25:40.699Z,1520659540.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:25:41.072Z,1520659541.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:25:41.496Z,1520659541.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:25:41.867Z,1520659541.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:25:42.275Z,1520659542.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:25:42.697Z,1520659542.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:25:43.070Z,1520659543.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:25:43.499Z,1520659543.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:25:43.898Z,1520659543.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:25:44.304Z,1520659544.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:25:44.669Z,1520659544.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:25:45.069Z,1520659545.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:25:45.479Z,1520659545.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:25:45.871Z,1520659545.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:25:46.278Z,1520659546.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:25:46.707Z,1520659546.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:25:47.081Z,1520659547.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:25:47.485Z,1520659547.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:25:47.870Z,1520659547.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:25:48.277Z,1520659548.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:25:48.677Z,1520659548.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:25:49.070Z,1520659549.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:25:49.474Z,1520659549.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:25:49.917Z,1520659549.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:25:50.314Z,1520659550.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:25:50.680Z,1520659550.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:25:51.079Z,1520659551.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:25:51.494Z,1520659551.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:25:51.888Z,1520659551.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:25:52.277Z,1520659552.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:25:56.145Z,1520659556.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:25:56.349Z,1520659556.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:25:56.729Z,1520659556.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:25:57.133Z,1520659557.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:25:57.517Z,1520659557.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:25:57.910Z,1520659557.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:25:58.310Z,1520659558.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:25:58.718Z,1520659558.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:25:59.149Z,1520659559.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:25:59.539Z,1520659559.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:25:59.913Z,1520659559.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:26:00.313Z,1520659560.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:26:00.721Z,1520659560.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:26:01.117Z,1520659561.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:26:01.520Z,1520659561.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:26:01.874Z,1520659561.874 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-03-10T05:26:01.874Z,1520659561.874 [NAL9602] Data Fault, FailCount= 1
2018-03-10T05:26:01.874Z,1520659561.874 [NAL9602](ERROR): Data Fault
2018-03-10T05:26:01.931Z,1520659561.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:26:02.015Z,1520659562.015 [CBIT](ERROR): Data Fault in component: NAL9602
2018-03-10T05:26:02.282Z,1520659562.282 [NAL9602](INFO): Powering down
2018-03-10T05:26:02.314Z,1520659562.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:26:02.674Z,1520659562.674 [NAL9602](FAULT): LCB fault:  Current Limiter Activated.
2018-03-10T05:26:02.674Z,1520659562.674 [NAL9602] Hardware Fault, FailCount= 1
2018-03-10T05:26:02.674Z,1520659562.674 [NAL9602](ERROR): Hardware Fault
2018-03-10T05:26:02.724Z,1520659562.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:26:03.113Z,1520659563.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:26:03.195Z,1520659563.195 [CBIT](INFO): Clearing failed state for component NAL9602
2018-03-10T05:26:03.195Z,1520659563.195 [NAL9602] No Fault, FailCount= 1
2018-03-10T05:26:03.513Z,1520659563.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:26:03.913Z,1520659563.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:26:04.320Z,1520659564.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:26:04.710Z,1520659564.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:26:05.125Z,1520659565.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:26:05.520Z,1520659565.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:26:05.913Z,1520659565.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:26:06.314Z,1520659566.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:26:06.714Z,1520659566.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:26:07.113Z,1520659567.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:26:07.513Z,1520659567.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:26:07.914Z,1520659567.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:26:08.321Z,1520659568.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:26:08.747Z,1520659568.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:26:09.114Z,1520659569.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:26:09.515Z,1520659569.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:26:09.913Z,1520659569.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:26:10.314Z,1520659570.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:26:10.716Z,1520659570.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:26:11.123Z,1520659571.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:26:11.553Z,1520659571.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:26:11.916Z,1520659571.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:26:12.313Z,1520659572.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:26:12.721Z,1520659572.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:26:13.116Z,1520659573.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:26:13.521Z,1520659573.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:26:13.921Z,1520659573.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:26:14.315Z,1520659574.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:26:14.714Z,1520659574.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:26:15.121Z,1520659575.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:26:15.515Z,1520659575.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:26:15.915Z,1520659575.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:26:16.321Z,1520659576.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:26:16.716Z,1520659576.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:26:17.121Z,1520659577.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:26:17.521Z,1520659577.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:26:17.916Z,1520659577.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:26:18.321Z,1520659578.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:26:18.721Z,1520659578.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:26:19.115Z,1520659579.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:26:19.515Z,1520659579.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:26:19.918Z,1520659579.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:26:20.316Z,1520659580.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:26:20.722Z,1520659580.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:26:21.137Z,1520659581.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:26:21.513Z,1520659581.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:26:21.915Z,1520659581.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:26:22.316Z,1520659582.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:26:22.714Z,1520659582.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:26:23.116Z,1520659583.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:26:23.524Z,1520659583.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:26:23.932Z,1520659583.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:26:24.322Z,1520659584.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:26:24.728Z,1520659584.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:26:25.106Z,1520659585.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:26:25.506Z,1520659585.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:26:25.953Z,1520659585.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:26:26.308Z,1520659586.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:26:26.737Z,1520659586.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:26:27.116Z,1520659587.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:26:27.516Z,1520659587.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:26:27.921Z,1520659587.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:26:28.315Z,1520659588.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:26:28.814Z,1520659588.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:26:29.113Z,1520659589.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:26:29.509Z,1520659589.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:26:29.915Z,1520659589.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:26:30.314Z,1520659590.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:26:30.721Z,1520659590.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:26:31.116Z,1520659591.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:26:31.513Z,1520659591.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:26:31.915Z,1520659591.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:26:32.317Z,1520659592.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:26:32.674Z,1520659592.674 [NAL9602](INFO): Powering up NAL9602
2018-03-10T05:26:32.718Z,1520659592.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:26:33.123Z,1520659593.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:26:33.532Z,1520659593.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:26:33.913Z,1520659593.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:26:34.321Z,1520659594.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:26:34.715Z,1520659594.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:26:35.114Z,1520659595.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:26:35.520Z,1520659595.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:26:35.897Z,1520659595.897 [BPC1](ERROR): Bank B: No match for stick 2 serial number:1717 in the onboard configuration file.
2018-03-10T05:26:35.897Z,1520659595.897 [BPC1](ERROR): Failed to parse Bank B battery data
2018-03-10T05:26:35.897Z,1520659595.897 [BPC1] Data Fault, FailCount= 1
2018-03-10T05:26:35.897Z,1520659595.897 [BPC1](ERROR): Data Fault
2018-03-10T05:26:35.921Z,1520659595.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:26:36.008Z,1520659596.008 [CBIT](ERROR): Data Fault in component: BPC1
2018-03-10T05:26:36.324Z,1520659596.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:26:36.724Z,1520659596.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:26:37.101Z,1520659597.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:26:37.188Z,1520659597.188 [CBIT](INFO): Clearing failed state for component BPC1
2018-03-10T05:26:37.188Z,1520659597.188 [BPC1] No Fault, FailCount= 1
2018-03-10T05:26:37.572Z,1520659597.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:26:37.931Z,1520659597.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:26:38.305Z,1520659598.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:26:38.725Z,1520659598.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:26:39.105Z,1520659599.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:26:39.505Z,1520659599.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:26:39.925Z,1520659599.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:26:40.304Z,1520659600.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:26:40.704Z,1520659600.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:26:41.105Z,1520659601.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:26:41.504Z,1520659601.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:26:41.904Z,1520659601.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:26:42.319Z,1520659602.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:26:42.705Z,1520659602.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:26:43.145Z,1520659603.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:26:43.527Z,1520659603.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:26:43.929Z,1520659603.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:26:44.329Z,1520659604.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:26:44.706Z,1520659604.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:26:45.126Z,1520659605.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:26:45.526Z,1520659605.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:26:45.918Z,1520659605.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:26:46.332Z,1520659606.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:26:46.729Z,1520659606.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:26:47.109Z,1520659607.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:26:47.507Z,1520659607.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:26:47.906Z,1520659607.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:26:48.313Z,1520659608.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:26:48.709Z,1520659608.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:26:49.113Z,1520659609.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:26:49.513Z,1520659609.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:26:49.913Z,1520659609.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:26:50.313Z,1520659610.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:26:50.706Z,1520659610.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:26:51.113Z,1520659611.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:26:51.510Z,1520659611.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:26:51.909Z,1520659611.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:26:52.312Z,1520659612.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:26:55.402Z,1520659615.402 [NAL9602](ERROR): NAL9602 initialization error.
2018-03-10T05:26:55.402Z,1520659615.402 [NAL9602] Communications Fault, FailCount= 2
2018-03-10T05:26:55.402Z,1520659615.402 [NAL9602](ERROR): Communications Fault
2018-03-10T05:26:55.465Z,1520659615.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:26:55.563Z,1520659615.563 [CBIT](ERROR): Communications Fault in component: NAL9602
2018-03-10T05:26:55.591Z,1520659615.591 [NAL9602](INFO): Powering down
2018-03-10T05:26:55.669Z,1520659615.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:26:56.014Z,1520659616.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:26:56.414Z,1520659616.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:26:56.508Z,1520659616.508 [CBIT](INFO): Clearing failed state for component NAL9602
2018-03-10T05:26:56.508Z,1520659616.508 [NAL9602] No Fault, FailCount= 2
2018-03-10T05:26:56.838Z,1520659616.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:26:57.216Z,1520659617.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:26:57.616Z,1520659617.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:26:58.014Z,1520659618.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:26:58.412Z,1520659618.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:26:58.814Z,1520659618.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:26:59.216Z,1520659619.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:26:59.613Z,1520659619.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:27:00.016Z,1520659620.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:27:00.414Z,1520659620.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:27:00.813Z,1520659620.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:27:01.216Z,1520659621.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:27:01.614Z,1520659621.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:27:02.012Z,1520659622.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:27:02.414Z,1520659622.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:27:02.813Z,1520659622.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:27:03.216Z,1520659623.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:27:03.617Z,1520659623.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:27:04.013Z,1520659624.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:27:04.417Z,1520659624.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:27:04.817Z,1520659624.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:27:05.216Z,1520659625.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:27:05.614Z,1520659625.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:27:06.017Z,1520659626.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:27:06.414Z,1520659626.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:27:06.848Z,1520659626.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:27:07.227Z,1520659627.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:27:07.636Z,1520659627.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:27:08.045Z,1520659628.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:27:08.423Z,1520659628.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:27:08.823Z,1520659628.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:27:09.229Z,1520659629.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:27:09.624Z,1520659629.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:27:10.022Z,1520659630.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:27:10.424Z,1520659630.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:27:10.825Z,1520659630.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:27:11.222Z,1520659631.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:27:11.629Z,1520659631.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:27:12.026Z,1520659632.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:27:12.426Z,1520659632.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:27:12.827Z,1520659632.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:27:13.227Z,1520659633.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:27:13.625Z,1520659633.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:27:14.029Z,1520659634.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:27:14.414Z,1520659634.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:27:14.828Z,1520659634.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:27:15.228Z,1520659635.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:27:15.628Z,1520659635.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:27:16.028Z,1520659636.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:27:16.427Z,1520659636.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:27:16.826Z,1520659636.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:27:17.225Z,1520659637.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:27:17.627Z,1520659637.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:27:18.026Z,1520659638.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:27:18.426Z,1520659638.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:27:18.827Z,1520659638.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:27:19.227Z,1520659639.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:27:19.626Z,1520659639.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:27:20.033Z,1520659640.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:27:20.449Z,1520659640.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:27:20.837Z,1520659640.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:27:21.209Z,1520659641.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:27:21.610Z,1520659641.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:27:22.035Z,1520659642.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:27:22.413Z,1520659642.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:27:22.812Z,1520659642.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:27:23.224Z,1520659643.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:27:23.638Z,1520659643.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:27:24.009Z,1520659644.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:27:24.436Z,1520659644.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:27:24.812Z,1520659644.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:27:25.213Z,1520659645.213 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:27:25.213Z,1520659645.213 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 4
2018-03-10T05:27:25.213Z,1520659645.213 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-03-10T05:27:25.231Z,1520659645.231 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:27:25.232Z,1520659645.232 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 4
2018-03-10T05:27:25.232Z,1520659645.232 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-03-10T05:27:25.233Z,1520659645.233 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:27:25.233Z,1520659645.233 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 4
2018-03-10T05:27:25.233Z,1520659645.233 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-10T05:27:25.315Z,1520659645.315 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-03-10T05:27:25.315Z,1520659645.315 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-03-10T05:27:25.315Z,1520659645.315 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-10T05:27:25.707Z,1520659645.707 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-03-10T05:27:25.707Z,1520659645.707 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 4
2018-03-10T05:27:25.708Z,1520659645.708 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-03-10T05:27:25.708Z,1520659645.708 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 4
2018-03-10T05:27:25.708Z,1520659645.708 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-10T05:27:25.708Z,1520659645.708 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 4
2018-03-10T05:27:25.985Z,1520659645.985 [NAL9602](INFO): Powering up NAL9602
2018-03-10T05:27:26.016Z,1520659646.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-03-10T05:27:26.016Z,1520659646.016 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-03-10T05:27:26.017Z,1520659646.017 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-03-10T05:27:26.017Z,1520659646.017 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-03-10T05:27:26.017Z,1520659646.017 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-03-10T05:27:26.018Z,1520659646.018 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-03-10T05:27:26.018Z,1520659646.018 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-10T05:27:26.018Z,1520659646.018 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-10T05:27:26.043Z,1520659646.043 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-10T05:27:26.412Z,1520659646.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-03-10T05:27:26.413Z,1520659646.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:27:26.817Z,1520659646.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-03-10T05:27:26.818Z,1520659646.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:27:27.216Z,1520659647.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-03-10T05:27:27.217Z,1520659647.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:27:27.624Z,1520659647.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-03-10T05:27:27.625Z,1520659647.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:27:28.017Z,1520659648.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-03-10T05:27:28.018Z,1520659648.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:27:28.413Z,1520659648.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-03-10T05:27:28.414Z,1520659648.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:27:28.818Z,1520659648.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-03-10T05:27:28.819Z,1520659648.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:27:29.216Z,1520659649.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-03-10T05:27:29.217Z,1520659649.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:27:29.617Z,1520659649.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-03-10T05:27:29.618Z,1520659649.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:27:30.016Z,1520659650.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-03-10T05:27:30.017Z,1520659650.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:27:30.417Z,1520659650.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-03-10T05:27:30.418Z,1520659650.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:27:30.817Z,1520659650.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-03-10T05:27:30.818Z,1520659650.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:27:31.218Z,1520659651.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-03-10T05:27:31.219Z,1520659651.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:27:31.618Z,1520659651.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-03-10T05:27:31.619Z,1520659651.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:27:32.017Z,1520659652.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-03-10T05:27:32.018Z,1520659652.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:27:32.418Z,1520659652.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-03-10T05:27:32.419Z,1520659652.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:27:32.824Z,1520659652.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-03-10T05:27:32.825Z,1520659652.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:27:33.268Z,1520659653.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.1 s old, using for 20.0 s.
2018-03-10T05:27:33.269Z,1520659653.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:27:33.645Z,1520659653.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-03-10T05:27:33.645Z,1520659653.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:27:34.021Z,1520659654.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-03-10T05:27:34.022Z,1520659654.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:27:34.422Z,1520659654.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-03-10T05:27:34.423Z,1520659654.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:27:34.821Z,1520659654.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-03-10T05:27:34.822Z,1520659654.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:27:35.221Z,1520659655.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-03-10T05:27:35.222Z,1520659655.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:27:35.621Z,1520659655.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-03-10T05:27:35.622Z,1520659655.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:27:36.021Z,1520659656.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-03-10T05:27:36.022Z,1520659656.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:27:36.426Z,1520659656.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-03-10T05:27:36.427Z,1520659656.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:27:36.782Z,1520659656.782 [NAL9602](INFO): NAL9602 initialized
2018-03-10T05:27:36.831Z,1520659656.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-03-10T05:27:36.832Z,1520659656.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:27:37.224Z,1520659657.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-03-10T05:27:37.225Z,1520659657.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:27:37.626Z,1520659657.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-03-10T05:27:37.627Z,1520659657.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:27:38.026Z,1520659658.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-03-10T05:27:38.028Z,1520659658.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:27:38.420Z,1520659658.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-03-10T05:27:38.421Z,1520659658.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:27:38.822Z,1520659658.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-03-10T05:27:38.823Z,1520659658.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:27:39.222Z,1520659659.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-03-10T05:27:39.223Z,1520659659.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:27:39.630Z,1520659659.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-03-10T05:27:39.631Z,1520659659.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:27:40.026Z,1520659660.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-03-10T05:27:40.027Z,1520659660.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:27:40.428Z,1520659660.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-03-10T05:27:40.428Z,1520659660.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:27:40.825Z,1520659660.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-03-10T05:27:40.826Z,1520659660.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:27:41.222Z,1520659661.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-03-10T05:27:41.223Z,1520659661.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:27:41.627Z,1520659661.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-03-10T05:27:41.628Z,1520659661.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:27:42.030Z,1520659662.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-03-10T05:27:42.031Z,1520659662.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:27:42.430Z,1520659662.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-03-10T05:27:42.431Z,1520659662.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:27:42.823Z,1520659662.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-03-10T05:27:42.824Z,1520659662.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:27:43.225Z,1520659663.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-03-10T05:27:43.226Z,1520659663.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:27:43.629Z,1520659663.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2018-03-10T05:27:43.630Z,1520659663.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:27:44.029Z,1520659664.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2018-03-10T05:27:44.030Z,1520659664.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:27:44.430Z,1520659664.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2018-03-10T05:27:44.430Z,1520659664.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:27:44.823Z,1520659664.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2018-03-10T05:27:44.824Z,1520659664.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:27:45.272Z,1520659665.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:27:45.677Z,1520659665.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:27:46.035Z,1520659666.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:27:46.435Z,1520659666.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:27:46.844Z,1520659666.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:27:47.241Z,1520659667.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:27:47.640Z,1520659667.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:27:48.052Z,1520659668.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:27:48.441Z,1520659668.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:27:48.838Z,1520659668.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:27:49.248Z,1520659669.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:27:49.640Z,1520659669.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:27:50.049Z,1520659670.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:27:50.441Z,1520659670.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:27:50.815Z,1520659670.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:27:51.215Z,1520659671.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:27:51.637Z,1520659671.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:27:52.045Z,1520659672.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:27:52.449Z,1520659672.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:27:55.561Z,1520659675.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:27:55.730Z,1520659675.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:27:56.111Z,1520659676.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:27:56.511Z,1520659676.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:27:56.917Z,1520659676.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:27:57.302Z,1520659677.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:27:57.712Z,1520659677.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:27:58.139Z,1520659678.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:27:58.505Z,1520659678.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:27:58.911Z,1520659678.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:27:59.321Z,1520659679.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:27:59.717Z,1520659679.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:28:00.106Z,1520659680.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:28:00.501Z,1520659680.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:28:00.909Z,1520659680.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:28:01.305Z,1520659681.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:28:01.725Z,1520659681.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:28:02.115Z,1520659682.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:28:02.514Z,1520659682.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:28:02.911Z,1520659682.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:28:03.302Z,1520659683.302 [BPC1](ERROR): Failed to receive battery data
2018-03-10T05:28:03.302Z,1520659683.302 [BPC1] Communications Fault, FailCount= 1
2018-03-10T05:28:03.302Z,1520659683.302 [BPC1](ERROR): Communications Fault
2018-03-10T05:28:03.313Z,1520659683.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:28:03.387Z,1520659683.387 [CBIT](ERROR): Communications Fault in component: BPC1
2018-03-10T05:28:03.705Z,1520659683.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:28:04.103Z,1520659684.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:28:04.509Z,1520659684.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:28:04.588Z,1520659684.588 [CBIT](INFO): Clearing failed state for component BPC1
2018-03-10T05:28:04.588Z,1520659684.588 [BPC1] No Fault, FailCount= 1
2018-03-10T05:28:04.965Z,1520659684.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:28:05.313Z,1520659685.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:28:05.715Z,1520659685.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:28:06.105Z,1520659686.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:28:06.504Z,1520659686.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:28:06.909Z,1520659686.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:28:07.305Z,1520659687.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:28:07.721Z,1520659687.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:28:08.114Z,1520659688.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:28:08.517Z,1520659688.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:28:08.912Z,1520659688.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:28:09.308Z,1520659689.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:28:09.703Z,1520659689.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:28:10.103Z,1520659690.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:28:10.504Z,1520659690.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:28:10.915Z,1520659690.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:28:11.314Z,1520659691.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:28:11.715Z,1520659691.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:28:12.105Z,1520659692.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:28:12.502Z,1520659692.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:28:12.905Z,1520659692.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:28:13.300Z,1520659693.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:28:13.714Z,1520659693.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:28:14.114Z,1520659694.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:28:14.515Z,1520659694.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:28:14.912Z,1520659694.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:28:15.304Z,1520659695.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:28:15.705Z,1520659695.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:28:16.104Z,1520659696.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:28:16.505Z,1520659696.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:28:16.915Z,1520659696.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:28:17.314Z,1520659697.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:28:17.715Z,1520659697.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:28:18.102Z,1520659698.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:28:18.513Z,1520659698.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:28:18.907Z,1520659698.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:28:19.311Z,1520659699.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:28:19.717Z,1520659699.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:28:20.116Z,1520659700.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:28:20.513Z,1520659700.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:28:20.896Z,1520659700.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:28:21.294Z,1520659701.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:28:21.746Z,1520659701.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:28:22.094Z,1520659702.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:28:22.494Z,1520659702.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:28:22.902Z,1520659702.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:28:23.307Z,1520659703.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:28:23.749Z,1520659703.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:28:24.090Z,1520659704.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:28:24.493Z,1520659704.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:28:24.897Z,1520659704.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:28:25.296Z,1520659705.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:28:25.717Z,1520659705.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:28:26.121Z,1520659706.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:28:26.514Z,1520659706.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:28:26.903Z,1520659706.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:28:27.305Z,1520659707.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:28:27.706Z,1520659707.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:28:28.105Z,1520659708.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:28:28.508Z,1520659708.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:28:28.919Z,1520659708.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:28:29.314Z,1520659709.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:28:29.715Z,1520659709.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:28:30.106Z,1520659710.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:28:30.509Z,1520659710.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:28:30.917Z,1520659710.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:28:31.316Z,1520659711.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:28:31.765Z,1520659711.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:28:32.121Z,1520659712.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:28:32.520Z,1520659712.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:28:32.894Z,1520659712.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:28:33.294Z,1520659713.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:28:33.694Z,1520659713.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:28:34.095Z,1520659714.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:28:34.494Z,1520659714.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:28:34.917Z,1520659714.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:28:35.309Z,1520659715.309 [BPC1](FAULT): Failed to initialize
2018-03-10T05:28:35.309Z,1520659715.309 [BPC1] Communications Fault, FailCount= 2
2018-03-10T05:28:35.309Z,1520659715.309 [BPC1](ERROR): Communications Fault
2018-03-10T05:28:35.316Z,1520659715.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:28:35.396Z,1520659715.396 [CBIT](ERROR): Communications Fault in component: BPC1
2018-03-10T05:28:35.725Z,1520659715.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:28:36.096Z,1520659716.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:28:36.501Z,1520659716.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:28:36.595Z,1520659716.595 [CBIT](INFO): Clearing failed state for component BPC1
2018-03-10T05:28:36.595Z,1520659716.595 [BPC1] No Fault, FailCount= 2
2018-03-10T05:28:36.962Z,1520659716.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:28:37.296Z,1520659717.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:28:37.720Z,1520659717.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:28:38.127Z,1520659718.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:28:38.509Z,1520659718.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:28:38.901Z,1520659718.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:28:39.300Z,1520659719.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:28:39.697Z,1520659719.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:28:40.097Z,1520659720.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:28:40.497Z,1520659720.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:28:40.902Z,1520659720.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:28:41.310Z,1520659721.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:28:41.730Z,1520659721.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:28:42.097Z,1520659722.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:28:42.497Z,1520659722.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:28:42.897Z,1520659722.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:28:43.297Z,1520659723.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:28:43.710Z,1520659723.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:28:44.106Z,1520659724.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:28:44.503Z,1520659724.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:28:44.900Z,1520659724.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:28:45.296Z,1520659725.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:28:45.698Z,1520659725.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:28:46.101Z,1520659726.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:28:46.501Z,1520659726.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:28:46.929Z,1520659726.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:28:47.329Z,1520659727.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:28:47.729Z,1520659727.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:28:48.101Z,1520659728.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:28:48.501Z,1520659728.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:28:48.901Z,1520659728.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:28:49.301Z,1520659729.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:28:49.706Z,1520659729.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:28:50.130Z,1520659730.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:28:50.506Z,1520659730.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:28:50.901Z,1520659730.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:28:51.302Z,1520659731.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:28:51.702Z,1520659731.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:28:52.102Z,1520659732.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:28:52.499Z,1520659732.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:28:55.607Z,1520659735.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:28:55.788Z,1520659735.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:28:56.182Z,1520659736.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:28:56.553Z,1520659736.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:28:56.989Z,1520659736.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:28:57.353Z,1520659737.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:28:57.766Z,1520659737.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:28:58.162Z,1520659738.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:28:58.568Z,1520659738.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:28:58.957Z,1520659738.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:28:59.359Z,1520659739.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:28:59.757Z,1520659739.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:29:00.158Z,1520659740.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:29:00.557Z,1520659740.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:29:00.969Z,1520659740.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:29:01.387Z,1520659741.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:29:01.762Z,1520659741.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:29:02.159Z,1520659742.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:29:02.559Z,1520659742.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:29:02.958Z,1520659742.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:29:03.359Z,1520659743.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:29:03.763Z,1520659743.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:29:04.164Z,1520659744.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:29:04.568Z,1520659744.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:29:04.965Z,1520659744.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:29:05.368Z,1520659745.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:29:05.757Z,1520659745.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:29:06.159Z,1520659746.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:29:06.565Z,1520659746.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:29:06.956Z,1520659746.956 [BPC1](FAULT): Failed to initialize
2018-03-10T05:29:06.957Z,1520659746.957 [BPC1] Communications Fault, FailCount= 3
2018-03-10T05:29:06.957Z,1520659746.957 [BPC1](ERROR): Communications Fault
2018-03-10T05:29:06.964Z,1520659746.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:29:07.079Z,1520659747.079 [CBIT](ERROR): Communications Fault in component: BPC1
2018-03-10T05:29:07.363Z,1520659747.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:29:07.762Z,1520659747.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:29:08.157Z,1520659748.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:29:08.239Z,1520659748.239 [CBIT](INFO): Clearing failed state for component BPC1
2018-03-10T05:29:08.239Z,1520659748.239 [BPC1] No Fault, FailCount= 3
2018-03-10T05:29:08.613Z,1520659748.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:29:08.958Z,1520659748.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:29:09.357Z,1520659749.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:29:09.762Z,1520659749.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:29:10.162Z,1520659750.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:29:10.562Z,1520659750.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:29:10.961Z,1520659750.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:29:11.357Z,1520659751.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:29:11.759Z,1520659751.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:29:12.159Z,1520659752.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:29:12.557Z,1520659752.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:29:12.963Z,1520659752.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:29:13.362Z,1520659753.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:29:13.762Z,1520659753.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:29:14.159Z,1520659754.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:29:14.559Z,1520659754.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:29:14.959Z,1520659754.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:29:15.358Z,1520659755.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:29:15.763Z,1520659755.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:29:16.166Z,1520659756.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:29:16.563Z,1520659756.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:29:16.965Z,1520659756.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:29:17.358Z,1520659757.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:29:17.760Z,1520659757.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:29:18.157Z,1520659758.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:29:18.559Z,1520659758.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:29:18.964Z,1520659758.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:29:19.366Z,1520659759.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:29:19.773Z,1520659759.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:29:20.158Z,1520659760.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:29:20.556Z,1520659760.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:29:20.958Z,1520659760.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:29:21.358Z,1520659761.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:29:21.766Z,1520659761.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:29:22.169Z,1520659762.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:29:22.566Z,1520659762.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:29:22.952Z,1520659762.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:29:23.359Z,1520659763.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:29:23.758Z,1520659763.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:29:24.155Z,1520659764.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:29:24.557Z,1520659764.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:29:24.965Z,1520659764.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:29:25.366Z,1520659765.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:29:25.773Z,1520659765.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:29:26.158Z,1520659766.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:29:26.552Z,1520659766.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:29:26.960Z,1520659766.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:29:27.360Z,1520659767.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:29:27.770Z,1520659767.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:29:28.171Z,1520659768.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:29:28.577Z,1520659768.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:29:28.960Z,1520659768.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:29:29.368Z,1520659769.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:29:29.769Z,1520659769.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:29:30.162Z,1520659770.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:29:30.569Z,1520659770.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:29:30.971Z,1520659770.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:29:31.374Z,1520659771.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:29:31.770Z,1520659771.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:29:32.170Z,1520659772.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:29:32.549Z,1520659772.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:29:32.951Z,1520659772.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:29:33.348Z,1520659773.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:29:33.754Z,1520659773.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:29:34.179Z,1520659774.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:29:34.580Z,1520659774.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:29:34.949Z,1520659774.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:29:35.353Z,1520659775.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:29:35.754Z,1520659775.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:29:36.154Z,1520659776.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:29:36.553Z,1520659776.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:29:36.983Z,1520659776.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:29:37.385Z,1520659777.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:29:37.766Z,1520659777.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:29:38.157Z,1520659778.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:29:38.551Z,1520659778.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:29:38.951Z,1520659778.951 [BPC1](FAULT): Failed to initialize
2018-03-10T05:29:38.951Z,1520659778.951 [BPC1] Communications Fault, FailCount= 4
2018-03-10T05:29:38.951Z,1520659778.951 [BPC1](ERROR): Communications Fault
2018-03-10T05:29:38.959Z,1520659778.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:29:39.051Z,1520659779.051 [CBIT](ERROR): Communications Fault in component: BPC1
2018-03-10T05:29:39.358Z,1520659779.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:29:39.762Z,1520659779.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:29:40.162Z,1520659780.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:29:40.251Z,1520659780.251 [CBIT](INFO): Clearing failed state for component BPC1
2018-03-10T05:29:40.251Z,1520659780.251 [BPC1] No Fault, FailCount= 4
2018-03-10T05:29:40.641Z,1520659780.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:29:40.957Z,1520659780.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:29:41.365Z,1520659781.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:29:41.761Z,1520659781.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:29:42.161Z,1520659782.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:29:42.565Z,1520659782.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:29:42.963Z,1520659782.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:29:43.362Z,1520659783.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:29:43.763Z,1520659783.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:29:44.165Z,1520659784.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:29:44.617Z,1520659784.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:29:44.965Z,1520659784.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:29:45.413Z,1520659785.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:29:45.781Z,1520659785.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:29:46.212Z,1520659786.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:29:46.569Z,1520659786.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:29:46.956Z,1520659786.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:29:47.365Z,1520659787.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:29:47.765Z,1520659787.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:29:48.189Z,1520659788.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:29:48.565Z,1520659788.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:29:48.989Z,1520659788.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:29:49.366Z,1520659789.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:29:49.770Z,1520659789.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:29:50.163Z,1520659790.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:29:50.549Z,1520659790.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:29:50.961Z,1520659790.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:29:51.354Z,1520659791.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:29:51.758Z,1520659791.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:29:52.170Z,1520659792.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:29:52.189Z,1520659792.189 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-03-10T05:29:52.189Z,1520659792.189 [Default:CheckIn:C.Wait] Stopped
2018-03-10T05:29:52.189Z,1520659792.189 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-03-10T05:29:52.189Z,1520659792.189 [Default:CheckIn:D] Running Loop=1
2018-03-10T05:29:52.563Z,1520659792.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:29:52.568Z,1520659792.568 [Default:CheckIn:D] Stopped
2018-03-10T05:29:52.568Z,1520659792.568 [Default:CheckIn:E] Running Loop=1
2018-03-10T05:29:55.657Z,1520659795.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:29:55.660Z,1520659795.660 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 10.577419 min 
2018-03-10T05:29:55.662Z,1520659795.662 [Default:CheckIn:E] Stopped
2018-03-10T05:29:55.662Z,1520659795.662 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-03-10T05:29:55.662Z,1520659795.662 [Default:CheckIn] Stopped
2018-03-10T05:29:55.662Z,1520659795.662 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-03-10T05:29:55.662Z,1520659795.662 [Default:CheckIn](INFO): Running loop #2
2018-03-10T05:29:55.662Z,1520659795.662 [Default:CheckIn] Running Loop=2
2018-03-10T05:29:55.662Z,1520659795.662 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-03-10T05:29:55.663Z,1520659795.663 [Default:CheckIn:Read_GPS] Running Loop=1
2018-03-10T05:29:55.817Z,1520659795.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:29:56.221Z,1520659796.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:29:56.616Z,1520659796.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:29:57.033Z,1520659797.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:29:57.424Z,1520659797.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:29:57.788Z,1520659797.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:29:58.219Z,1520659798.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:29:58.633Z,1520659798.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:29:59.021Z,1520659799.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:29:59.417Z,1520659799.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:29:59.807Z,1520659799.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:30:00.224Z,1520659800.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:30:00.620Z,1520659800.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:30:01.016Z,1520659801.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:30:01.419Z,1520659801.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:30:01.821Z,1520659801.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:30:02.232Z,1520659802.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:30:02.617Z,1520659802.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:30:03.021Z,1520659803.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:30:03.420Z,1520659803.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:30:03.794Z,1520659803.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:30:04.200Z,1520659804.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:30:04.622Z,1520659804.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:30:05.029Z,1520659805.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:30:05.422Z,1520659805.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:30:05.799Z,1520659805.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:30:06.197Z,1520659806.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:30:06.629Z,1520659806.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:30:07.022Z,1520659807.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:30:07.434Z,1520659807.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:30:07.849Z,1520659807.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:30:08.226Z,1520659808.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:30:08.624Z,1520659808.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:30:09.026Z,1520659809.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:30:09.425Z,1520659809.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:30:09.826Z,1520659809.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:30:10.200Z,1520659810.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:30:10.607Z,1520659810.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:30:11.001Z,1520659811.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:30:11.425Z,1520659811.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:30:11.833Z,1520659811.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:30:12.224Z,1520659812.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:30:12.699Z,1520659812.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:30:13.033Z,1520659813.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:30:13.428Z,1520659813.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:30:13.828Z,1520659813.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:30:14.240Z,1520659814.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:30:14.633Z,1520659814.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:30:15.011Z,1520659815.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:30:15.407Z,1520659815.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:30:15.795Z,1520659815.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:30:16.217Z,1520659816.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:30:16.616Z,1520659816.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:30:17.011Z,1520659817.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:30:17.421Z,1520659817.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:30:17.821Z,1520659817.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:30:18.193Z,1520659818.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:30:18.616Z,1520659818.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:30:19.022Z,1520659819.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:30:19.443Z,1520659819.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:30:19.812Z,1520659819.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:30:20.213Z,1520659820.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:30:20.617Z,1520659820.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:30:21.037Z,1520659821.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:30:21.437Z,1520659821.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:30:21.818Z,1520659821.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:30:22.197Z,1520659822.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:30:22.622Z,1520659822.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 0.424872 seconds old.
2018-03-10T05:30:22.623Z,1520659822.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:30:22.624Z,1520659822.624 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 0.425523 seconds old.
2018-03-10T05:30:22.625Z,1520659822.625 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 0.409657 seconds old.
2018-03-10T05:30:23.023Z,1520659823.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 0.826559 seconds old.
2018-03-10T05:30:23.024Z,1520659823.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:30:23.025Z,1520659823.025 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 0.826889 seconds old.
2018-03-10T05:30:23.026Z,1520659823.026 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 0.811006 seconds old.
2018-03-10T05:30:23.423Z,1520659823.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 1.226561 seconds old.
2018-03-10T05:30:23.424Z,1520659823.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:30:23.425Z,1520659823.425 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 1.226863 seconds old.
2018-03-10T05:30:23.426Z,1520659823.426 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 1.210973 seconds old.
2018-03-10T05:30:23.797Z,1520659823.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 1.600574 seconds old.
2018-03-10T05:30:23.798Z,1520659823.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:30:23.815Z,1520659823.815 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 1.617047 seconds old.
2018-03-10T05:30:23.816Z,1520659823.816 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 1.601238 seconds old.
2018-03-10T05:30:24.227Z,1520659824.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 2.029746 seconds old.
2018-03-10T05:30:24.228Z,1520659824.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:30:24.229Z,1520659824.229 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 2.030323 seconds old.
2018-03-10T05:30:24.230Z,1520659824.230 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 2.014449 seconds old.
2018-03-10T05:30:24.625Z,1520659824.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:30:25.149Z,1520659825.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:30:25.420Z,1520659825.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:30:25.828Z,1520659825.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:30:26.194Z,1520659826.194 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:30:26.195Z,1520659826.195 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 5
2018-03-10T05:30:26.195Z,1520659826.195 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-03-10T05:30:26.199Z,1520659826.199 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:30:26.199Z,1520659826.199 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 5
2018-03-10T05:30:26.199Z,1520659826.199 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-03-10T05:30:26.202Z,1520659826.202 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:30:26.219Z,1520659826.219 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 5
2018-03-10T05:30:26.219Z,1520659826.219 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-10T05:30:26.295Z,1520659826.295 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-03-10T05:30:26.296Z,1520659826.296 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-03-10T05:30:26.296Z,1520659826.296 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-10T05:30:26.699Z,1520659826.699 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-03-10T05:30:26.699Z,1520659826.699 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 5
2018-03-10T05:30:26.700Z,1520659826.700 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-03-10T05:30:26.700Z,1520659826.700 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 5
2018-03-10T05:30:26.700Z,1520659826.700 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-10T05:30:26.700Z,1520659826.700 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 5
2018-03-10T05:30:27.039Z,1520659827.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-03-10T05:30:27.039Z,1520659827.039 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-03-10T05:30:27.040Z,1520659827.040 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-03-10T05:30:27.040Z,1520659827.040 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-03-10T05:30:27.040Z,1520659827.040 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-03-10T05:30:27.041Z,1520659827.041 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-03-10T05:30:27.041Z,1520659827.041 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-10T05:30:27.041Z,1520659827.041 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-10T05:30:27.042Z,1520659827.042 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-10T05:30:27.431Z,1520659827.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-03-10T05:30:27.432Z,1520659827.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:30:27.808Z,1520659827.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-03-10T05:30:27.809Z,1520659827.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:30:28.203Z,1520659828.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-03-10T05:30:28.204Z,1520659828.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:30:28.613Z,1520659828.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-03-10T05:30:28.614Z,1520659828.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:30:29.032Z,1520659829.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-03-10T05:30:29.033Z,1520659829.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:30:29.409Z,1520659829.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-03-10T05:30:29.410Z,1520659829.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:30:29.802Z,1520659829.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-03-10T05:30:29.804Z,1520659829.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:30:30.205Z,1520659830.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-03-10T05:30:30.206Z,1520659830.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:30:30.633Z,1520659830.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-03-10T05:30:30.634Z,1520659830.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:30:31.040Z,1520659831.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-03-10T05:30:31.041Z,1520659831.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:30:31.409Z,1520659831.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-03-10T05:30:31.410Z,1520659831.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:30:31.801Z,1520659831.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-03-10T05:30:31.802Z,1520659831.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:30:32.218Z,1520659832.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-03-10T05:30:32.219Z,1520659832.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:30:32.614Z,1520659832.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-03-10T05:30:32.616Z,1520659832.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:30:33.020Z,1520659833.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-03-10T05:30:33.021Z,1520659833.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:30:33.413Z,1520659833.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-03-10T05:30:33.414Z,1520659833.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:30:33.820Z,1520659833.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-03-10T05:30:33.821Z,1520659833.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:30:34.199Z,1520659834.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-03-10T05:30:34.201Z,1520659834.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:30:34.616Z,1520659834.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-03-10T05:30:34.617Z,1520659834.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:30:35.020Z,1520659835.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-03-10T05:30:35.021Z,1520659835.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:30:35.432Z,1520659835.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-03-10T05:30:35.433Z,1520659835.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:30:35.802Z,1520659835.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-03-10T05:30:35.804Z,1520659835.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:30:36.206Z,1520659836.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-03-10T05:30:36.207Z,1520659836.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:30:36.631Z,1520659836.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-03-10T05:30:36.632Z,1520659836.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:30:37.034Z,1520659837.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-03-10T05:30:37.036Z,1520659837.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:30:37.415Z,1520659837.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-03-10T05:30:37.416Z,1520659837.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:30:37.805Z,1520659837.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-03-10T05:30:37.806Z,1520659837.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:30:38.202Z,1520659838.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-03-10T05:30:38.204Z,1520659838.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:30:38.633Z,1520659838.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-03-10T05:30:38.634Z,1520659838.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:30:39.019Z,1520659839.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-03-10T05:30:39.020Z,1520659839.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:30:39.441Z,1520659839.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-03-10T05:30:39.442Z,1520659839.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:30:39.811Z,1520659839.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-03-10T05:30:39.812Z,1520659839.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:30:40.205Z,1520659840.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-03-10T05:30:40.206Z,1520659840.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:30:40.616Z,1520659840.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-03-10T05:30:40.617Z,1520659840.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:30:41.021Z,1520659841.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-03-10T05:30:41.022Z,1520659841.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:30:41.424Z,1520659841.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-03-10T05:30:41.425Z,1520659841.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:30:41.823Z,1520659841.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-03-10T05:30:41.824Z,1520659841.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:30:42.208Z,1520659842.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-03-10T05:30:42.209Z,1520659842.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:30:42.619Z,1520659842.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-03-10T05:30:42.620Z,1520659842.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:30:43.013Z,1520659843.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-03-10T05:30:43.014Z,1520659843.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:30:43.428Z,1520659843.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-03-10T05:30:43.429Z,1520659843.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:30:43.813Z,1520659843.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-03-10T05:30:43.814Z,1520659843.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:30:44.206Z,1520659844.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-03-10T05:30:44.207Z,1520659844.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:30:44.612Z,1520659844.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2018-03-10T05:30:44.613Z,1520659844.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:30:45.032Z,1520659845.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2018-03-10T05:30:45.033Z,1520659845.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:30:45.417Z,1520659845.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2018-03-10T05:30:45.418Z,1520659845.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:30:45.805Z,1520659845.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2018-03-10T05:30:45.806Z,1520659845.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:30:46.196Z,1520659846.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:30:46.633Z,1520659846.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:30:47.022Z,1520659847.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:30:47.425Z,1520659847.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:30:47.796Z,1520659847.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:30:48.224Z,1520659848.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:30:48.624Z,1520659848.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:30:49.026Z,1520659849.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:30:49.405Z,1520659849.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:30:49.828Z,1520659849.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:30:50.198Z,1520659850.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:30:50.623Z,1520659850.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:30:51.027Z,1520659851.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:30:51.435Z,1520659851.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:30:51.813Z,1520659851.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:30:52.225Z,1520659852.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:30:52.619Z,1520659852.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:30:55.717Z,1520659855.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:30:55.897Z,1520659855.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:30:56.266Z,1520659856.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:30:56.670Z,1520659856.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:30:57.072Z,1520659857.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:30:57.465Z,1520659857.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:30:57.874Z,1520659857.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:30:58.274Z,1520659858.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:30:58.671Z,1520659858.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:30:59.067Z,1520659859.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:30:59.465Z,1520659859.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:30:59.868Z,1520659859.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:31:00.273Z,1520659860.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:31:00.670Z,1520659860.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:31:01.097Z,1520659861.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:31:01.471Z,1520659861.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:31:01.873Z,1520659861.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:31:02.265Z,1520659862.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:31:02.666Z,1520659862.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:31:03.066Z,1520659863.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:31:03.466Z,1520659863.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:31:03.870Z,1520659863.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:31:04.276Z,1520659864.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:31:04.703Z,1520659864.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:31:05.065Z,1520659865.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:31:05.465Z,1520659865.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:31:05.867Z,1520659865.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:31:06.268Z,1520659866.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:31:06.685Z,1520659866.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:31:07.107Z,1520659867.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:31:07.478Z,1520659867.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:31:07.866Z,1520659867.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:31:08.267Z,1520659868.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:31:08.669Z,1520659868.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:31:09.068Z,1520659869.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:31:09.466Z,1520659869.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:31:09.878Z,1520659869.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:31:10.289Z,1520659870.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:31:10.713Z,1520659870.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:31:11.069Z,1520659871.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:31:11.472Z,1520659871.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:31:11.869Z,1520659871.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:31:12.268Z,1520659872.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:31:12.678Z,1520659872.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:31:13.089Z,1520659873.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:31:13.479Z,1520659873.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:31:13.869Z,1520659873.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:31:14.273Z,1520659874.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:31:14.673Z,1520659874.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:31:15.069Z,1520659875.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:31:15.468Z,1520659875.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:31:15.879Z,1520659875.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:31:16.285Z,1520659876.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:31:16.678Z,1520659876.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:31:17.073Z,1520659877.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:31:17.473Z,1520659877.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:31:17.870Z,1520659877.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:31:18.273Z,1520659878.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:31:18.697Z,1520659878.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:31:19.082Z,1520659879.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:31:19.479Z,1520659879.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:31:19.870Z,1520659879.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:31:20.272Z,1520659880.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:31:20.672Z,1520659880.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:31:21.073Z,1520659881.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:31:21.480Z,1520659881.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:31:21.880Z,1520659881.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:31:22.278Z,1520659882.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:31:22.680Z,1520659882.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:31:23.076Z,1520659883.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:31:23.473Z,1520659883.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:31:23.875Z,1520659883.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:31:24.257Z,1520659884.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:31:24.683Z,1520659884.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:31:25.093Z,1520659885.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:31:25.482Z,1520659885.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:31:25.858Z,1520659885.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:31:26.261Z,1520659886.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:31:26.658Z,1520659886.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:31:27.059Z,1520659887.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:31:27.485Z,1520659887.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:31:27.887Z,1520659887.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:31:28.290Z,1520659888.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:31:28.692Z,1520659888.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:31:29.065Z,1520659889.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:31:29.468Z,1520659889.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:31:29.896Z,1520659889.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:31:30.261Z,1520659890.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:31:30.674Z,1520659890.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:31:31.074Z,1520659891.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:31:31.494Z,1520659891.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:31:31.865Z,1520659891.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:31:32.266Z,1520659892.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:31:32.669Z,1520659892.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:31:33.096Z,1520659893.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:31:33.467Z,1520659893.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:31:33.881Z,1520659893.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:31:34.275Z,1520659894.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:31:34.673Z,1520659894.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:31:35.069Z,1520659895.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:31:35.468Z,1520659895.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:31:35.869Z,1520659895.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:31:36.269Z,1520659896.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:31:36.681Z,1520659896.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:31:37.075Z,1520659897.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:31:37.474Z,1520659897.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:31:37.882Z,1520659897.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:31:38.273Z,1520659898.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:31:38.669Z,1520659898.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:31:39.070Z,1520659899.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:31:39.473Z,1520659899.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:31:39.875Z,1520659899.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:31:40.274Z,1520659900.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:31:40.681Z,1520659900.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:31:41.073Z,1520659901.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:31:41.503Z,1520659901.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:31:41.867Z,1520659901.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:31:42.269Z,1520659902.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:31:42.673Z,1520659902.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:31:43.074Z,1520659903.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:31:43.474Z,1520659903.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:31:43.873Z,1520659903.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:31:44.285Z,1520659904.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:31:44.665Z,1520659904.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:31:45.070Z,1520659905.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:31:45.469Z,1520659905.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:31:45.880Z,1520659905.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:31:46.316Z,1520659906.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:31:46.691Z,1520659906.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:31:47.076Z,1520659907.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:31:47.494Z,1520659907.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:31:47.892Z,1520659907.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:31:48.265Z,1520659908.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:31:48.699Z,1520659908.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:31:49.073Z,1520659909.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:31:49.502Z,1520659909.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:31:49.881Z,1520659909.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:31:50.312Z,1520659910.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:31:50.670Z,1520659910.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:31:51.067Z,1520659911.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:31:51.474Z,1520659911.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:31:51.889Z,1520659911.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:31:52.279Z,1520659912.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:31:52.685Z,1520659912.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:31:55.792Z,1520659915.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:31:55.980Z,1520659915.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:31:56.377Z,1520659916.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:31:56.770Z,1520659916.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:31:57.170Z,1520659917.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:31:57.546Z,1520659917.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:31:57.974Z,1520659917.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:31:58.346Z,1520659918.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:31:58.770Z,1520659918.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:31:59.147Z,1520659919.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:31:59.573Z,1520659919.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:31:59.945Z,1520659919.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:32:00.348Z,1520659920.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:32:00.750Z,1520659920.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:32:01.146Z,1520659921.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:32:01.541Z,1520659921.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:32:01.974Z,1520659921.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:32:02.375Z,1520659922.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:32:02.777Z,1520659922.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:32:03.149Z,1520659923.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:32:03.546Z,1520659923.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:32:03.949Z,1520659923.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:32:04.345Z,1520659924.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:32:04.779Z,1520659924.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:32:05.158Z,1520659925.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:32:05.576Z,1520659925.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:32:05.947Z,1520659925.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:32:06.349Z,1520659926.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:32:06.792Z,1520659926.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:32:07.185Z,1520659927.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:32:07.550Z,1520659927.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:32:07.955Z,1520659927.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:32:08.355Z,1520659928.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:32:08.761Z,1520659928.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:32:09.149Z,1520659929.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:32:09.550Z,1520659929.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:32:09.950Z,1520659929.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:32:10.350Z,1520659930.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:32:10.761Z,1520659930.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:32:11.173Z,1520659931.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:32:11.562Z,1520659931.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:32:11.957Z,1520659931.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:32:12.358Z,1520659932.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:32:12.753Z,1520659932.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:32:13.156Z,1520659933.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:32:13.555Z,1520659933.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:32:13.963Z,1520659933.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:32:14.363Z,1520659934.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:32:14.769Z,1520659934.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:32:15.160Z,1520659935.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:32:15.561Z,1520659935.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:32:15.957Z,1520659935.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:32:16.357Z,1520659936.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:32:16.769Z,1520659936.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:32:17.177Z,1520659937.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:32:17.569Z,1520659937.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:32:17.966Z,1520659937.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:32:18.375Z,1520659938.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:32:18.767Z,1520659938.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:32:19.166Z,1520659939.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:32:19.561Z,1520659939.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:32:19.966Z,1520659939.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:32:20.366Z,1520659940.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:32:20.768Z,1520659940.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:32:21.141Z,1520659941.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:32:21.565Z,1520659941.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:32:21.942Z,1520659941.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:32:22.349Z,1520659942.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:32:22.771Z,1520659942.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:32:23.170Z,1520659943.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:32:23.574Z,1520659943.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:32:23.949Z,1520659943.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:32:24.348Z,1520659944.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:32:24.745Z,1520659944.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:32:25.153Z,1520659945.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:32:25.553Z,1520659945.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:32:25.978Z,1520659945.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:32:26.379Z,1520659946.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:32:26.754Z,1520659946.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:32:27.149Z,1520659947.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:32:27.552Z,1520659947.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:32:27.950Z,1520659947.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:32:28.349Z,1520659948.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:32:28.781Z,1520659948.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:32:29.188Z,1520659949.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:32:29.581Z,1520659949.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:32:29.955Z,1520659949.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:32:30.369Z,1520659950.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:32:30.750Z,1520659950.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:32:31.153Z,1520659951.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:32:31.548Z,1520659951.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:32:31.969Z,1520659951.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:32:32.362Z,1520659952.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:32:32.762Z,1520659952.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:32:33.150Z,1520659953.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:32:33.557Z,1520659953.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:32:33.954Z,1520659953.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:32:34.351Z,1520659954.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:32:34.762Z,1520659954.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:32:35.162Z,1520659955.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:32:35.569Z,1520659955.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:32:35.992Z,1520659955.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:32:36.353Z,1520659956.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:32:36.757Z,1520659956.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:32:37.152Z,1520659957.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:32:37.554Z,1520659957.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:32:37.962Z,1520659957.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:32:38.363Z,1520659958.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:32:38.764Z,1520659958.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:32:39.160Z,1520659959.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:32:39.557Z,1520659959.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:32:39.953Z,1520659959.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:32:40.351Z,1520659960.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:32:40.762Z,1520659960.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:32:41.169Z,1520659961.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:32:41.569Z,1520659961.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:32:41.976Z,1520659961.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:32:42.355Z,1520659962.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:32:42.755Z,1520659962.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:32:43.155Z,1520659963.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:32:43.556Z,1520659963.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:32:43.962Z,1520659963.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:32:44.362Z,1520659964.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:32:44.769Z,1520659964.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:32:45.155Z,1520659965.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:32:45.561Z,1520659965.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:32:45.954Z,1520659965.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:32:46.353Z,1520659966.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:32:46.766Z,1520659966.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:32:47.169Z,1520659967.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:32:47.569Z,1520659967.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:32:47.942Z,1520659967.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:32:48.374Z,1520659968.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:32:48.780Z,1520659968.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:32:49.145Z,1520659969.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:32:49.541Z,1520659969.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:32:49.968Z,1520659969.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:32:50.372Z,1520659970.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:32:50.772Z,1520659970.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:32:51.172Z,1520659971.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:32:51.548Z,1520659971.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:32:51.950Z,1520659971.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:32:52.373Z,1520659972.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:32:52.768Z,1520659972.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:32:55.872Z,1520659975.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:32:56.049Z,1520659976.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:32:56.411Z,1520659976.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:32:56.814Z,1520659976.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:32:57.212Z,1520659977.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:32:57.631Z,1520659977.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:32:58.041Z,1520659978.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:32:58.433Z,1520659978.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:32:58.810Z,1520659978.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:32:59.206Z,1520659979.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:32:59.632Z,1520659979.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:33:00.033Z,1520659980.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:33:00.446Z,1520659980.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:33:00.848Z,1520659980.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:33:01.213Z,1520659981.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:33:01.639Z,1520659981.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:33:02.037Z,1520659982.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:33:02.451Z,1520659982.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:33:02.816Z,1520659982.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:33:03.213Z,1520659983.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:33:03.618Z,1520659983.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:33:04.014Z,1520659984.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:33:04.418Z,1520659984.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:33:04.813Z,1520659984.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:33:05.211Z,1520659985.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:33:05.619Z,1520659985.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:33:06.043Z,1520659986.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:33:06.415Z,1520659986.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:33:06.821Z,1520659986.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:33:07.229Z,1520659987.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:33:07.625Z,1520659987.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:33:08.018Z,1520659988.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:33:08.425Z,1520659988.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:33:08.816Z,1520659988.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:33:09.217Z,1520659989.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:33:09.619Z,1520659989.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:33:10.021Z,1520659990.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:33:10.418Z,1520659990.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:33:10.815Z,1520659990.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:33:11.216Z,1520659991.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:33:11.619Z,1520659991.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:33:12.017Z,1520659992.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:33:12.419Z,1520659992.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:33:12.821Z,1520659992.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:33:13.233Z,1520659993.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:33:13.628Z,1520659993.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:33:14.026Z,1520659994.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:33:14.426Z,1520659994.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:33:14.818Z,1520659994.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:33:15.248Z,1520659995.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:33:15.633Z,1520659995.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:33:16.023Z,1520659996.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:33:16.426Z,1520659996.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:33:16.814Z,1520659996.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:33:17.216Z,1520659997.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:33:17.633Z,1520659997.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:33:18.031Z,1520659998.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:33:18.453Z,1520659998.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:33:18.816Z,1520659998.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:33:19.216Z,1520659999.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:33:19.627Z,1520659999.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:33:20.026Z,1520660000.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:33:20.418Z,1520660000.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:33:20.944Z,1520660000.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:33:21.225Z,1520660001.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:33:21.633Z,1520660001.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:33:22.029Z,1520660002.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:33:22.430Z,1520660002.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:33:22.823Z,1520660002.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:33:23.222Z,1520660003.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:33:23.637Z,1520660003.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:33:24.036Z,1520660004.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:33:24.437Z,1520660004.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:33:24.823Z,1520660004.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:33:25.241Z,1520660005.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:33:25.639Z,1520660005.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:33:26.038Z,1520660006.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:33:26.438Z,1520660006.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:33:26.810Z,1520660006.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:33:27.210Z,1520660007.210 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:33:27.210Z,1520660007.210 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 6
2018-03-10T05:33:27.210Z,1520660007.210 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-03-10T05:33:27.212Z,1520660007.212 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:33:27.212Z,1520660007.212 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 6
2018-03-10T05:33:27.212Z,1520660007.212 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-03-10T05:33:27.214Z,1520660007.214 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:33:27.214Z,1520660007.214 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 6
2018-03-10T05:33:27.214Z,1520660007.214 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-10T05:33:27.307Z,1520660007.307 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-03-10T05:33:27.307Z,1520660007.307 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-03-10T05:33:27.307Z,1520660007.307 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-10T05:33:27.711Z,1520660007.711 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-03-10T05:33:27.711Z,1520660007.711 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 6
2018-03-10T05:33:27.711Z,1520660007.711 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-03-10T05:33:27.712Z,1520660007.712 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 6
2018-03-10T05:33:27.712Z,1520660007.712 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-10T05:33:27.712Z,1520660007.712 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 6
2018-03-10T05:33:28.027Z,1520660008.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-03-10T05:33:28.027Z,1520660008.027 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-03-10T05:33:28.028Z,1520660008.028 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-03-10T05:33:28.028Z,1520660008.028 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-03-10T05:33:28.028Z,1520660008.028 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-03-10T05:33:28.029Z,1520660008.029 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-03-10T05:33:28.029Z,1520660008.029 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-10T05:33:28.029Z,1520660008.029 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-10T05:33:28.030Z,1520660008.030 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-10T05:33:28.424Z,1520660008.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-03-10T05:33:28.425Z,1520660008.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:33:28.826Z,1520660008.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-03-10T05:33:28.827Z,1520660008.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:33:29.236Z,1520660009.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-03-10T05:33:29.237Z,1520660009.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:33:29.626Z,1520660009.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-03-10T05:33:29.628Z,1520660009.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:33:30.029Z,1520660010.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-03-10T05:33:30.030Z,1520660010.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:33:30.427Z,1520660010.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-03-10T05:33:30.428Z,1520660010.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:33:30.817Z,1520660010.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-03-10T05:33:30.818Z,1520660010.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:33:31.218Z,1520660011.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-03-10T05:33:31.219Z,1520660011.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:33:31.627Z,1520660011.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-03-10T05:33:31.628Z,1520660011.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:33:32.026Z,1520660012.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-03-10T05:33:32.027Z,1520660012.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:33:32.427Z,1520660012.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-03-10T05:33:32.428Z,1520660012.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:33:32.819Z,1520660012.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-03-10T05:33:32.820Z,1520660012.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:33:33.219Z,1520660013.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-03-10T05:33:33.220Z,1520660013.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:33:33.628Z,1520660013.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-03-10T05:33:33.628Z,1520660013.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:33:34.036Z,1520660014.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-03-10T05:33:34.037Z,1520660014.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:33:34.426Z,1520660014.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-03-10T05:33:34.427Z,1520660014.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:33:34.818Z,1520660014.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-03-10T05:33:34.819Z,1520660014.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:33:35.225Z,1520660015.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-03-10T05:33:35.226Z,1520660015.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:33:35.648Z,1520660015.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-03-10T05:33:35.649Z,1520660015.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:33:36.026Z,1520660016.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-03-10T05:33:36.027Z,1520660016.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:33:36.427Z,1520660016.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-03-10T05:33:36.428Z,1520660016.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:33:36.817Z,1520660016.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-03-10T05:33:36.818Z,1520660016.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:33:37.219Z,1520660017.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-03-10T05:33:37.220Z,1520660017.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:33:37.640Z,1520660017.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-03-10T05:33:37.641Z,1520660017.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:33:38.048Z,1520660018.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-03-10T05:33:38.049Z,1520660018.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:33:38.432Z,1520660018.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-03-10T05:33:38.433Z,1520660018.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:33:38.826Z,1520660018.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-03-10T05:33:38.827Z,1520660018.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:33:39.223Z,1520660019.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-03-10T05:33:39.224Z,1520660019.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:33:39.630Z,1520660019.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-03-10T05:33:39.631Z,1520660019.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:33:40.032Z,1520660020.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-03-10T05:33:40.033Z,1520660020.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:33:40.428Z,1520660020.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-03-10T05:33:40.429Z,1520660020.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:33:40.822Z,1520660020.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-03-10T05:33:40.827Z,1520660020.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:33:41.205Z,1520660021.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-03-10T05:33:41.206Z,1520660021.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:33:41.630Z,1520660021.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-03-10T05:33:41.631Z,1520660021.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:33:42.030Z,1520660022.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-03-10T05:33:42.031Z,1520660022.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:33:42.430Z,1520660022.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-03-10T05:33:42.431Z,1520660022.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:33:42.807Z,1520660022.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-03-10T05:33:42.808Z,1520660022.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:33:43.205Z,1520660023.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-03-10T05:33:43.206Z,1520660023.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:33:43.634Z,1520660023.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-03-10T05:33:43.640Z,1520660023.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:33:44.038Z,1520660024.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-03-10T05:33:44.039Z,1520660024.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:33:44.441Z,1520660024.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-03-10T05:33:44.442Z,1520660024.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:33:44.809Z,1520660024.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-03-10T05:33:44.810Z,1520660024.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:33:45.210Z,1520660025.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-03-10T05:33:45.211Z,1520660025.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:33:45.639Z,1520660025.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2018-03-10T05:33:45.640Z,1520660025.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:33:46.045Z,1520660026.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2018-03-10T05:33:46.046Z,1520660026.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:33:46.448Z,1520660026.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2018-03-10T05:33:46.449Z,1520660026.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:33:46.815Z,1520660026.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2018-03-10T05:33:46.816Z,1520660026.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:33:47.212Z,1520660027.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:33:47.652Z,1520660027.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:33:48.061Z,1520660028.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:33:48.427Z,1520660028.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:33:48.816Z,1520660028.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:33:49.214Z,1520660029.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:33:49.633Z,1520660029.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:33:50.058Z,1520660030.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:33:50.457Z,1520660030.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:33:50.838Z,1520660030.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:33:51.232Z,1520660031.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:33:51.643Z,1520660031.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:33:52.022Z,1520660032.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:33:52.422Z,1520660032.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:33:52.811Z,1520660032.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:33:56.098Z,1520660036.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:33:56.253Z,1520660036.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:33:56.646Z,1520660036.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:33:57.053Z,1520660037.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:33:57.444Z,1520660037.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:33:57.845Z,1520660037.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:33:58.231Z,1520660038.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:33:58.649Z,1520660038.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:33:59.048Z,1520660039.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:33:59.473Z,1520660039.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:33:59.841Z,1520660039.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:34:00.257Z,1520660040.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:34:00.681Z,1520660040.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:34:01.050Z,1520660041.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:34:01.451Z,1520660041.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:34:01.847Z,1520660041.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:34:02.242Z,1520660042.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:34:02.658Z,1520660042.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:34:03.065Z,1520660043.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:34:03.452Z,1520660043.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:34:03.845Z,1520660043.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:34:04.240Z,1520660044.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:34:04.651Z,1520660044.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:34:05.052Z,1520660045.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:34:05.454Z,1520660045.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:34:05.842Z,1520660045.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:34:06.245Z,1520660046.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:34:06.649Z,1520660046.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:34:07.054Z,1520660047.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:34:07.451Z,1520660047.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:34:07.841Z,1520660047.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:34:08.249Z,1520660048.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:34:08.657Z,1520660048.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:34:09.051Z,1520660049.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:34:09.450Z,1520660049.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:34:09.852Z,1520660049.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:34:10.244Z,1520660050.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:34:10.650Z,1520660050.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:34:11.051Z,1520660051.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:34:11.454Z,1520660051.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:34:11.843Z,1520660051.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:34:12.245Z,1520660052.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:34:12.655Z,1520660052.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:34:13.058Z,1520660053.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:34:13.499Z,1520660053.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:34:13.850Z,1520660053.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:34:14.245Z,1520660054.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:34:14.655Z,1520660054.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:34:15.062Z,1520660055.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:34:15.469Z,1520660055.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:34:15.826Z,1520660055.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:34:16.240Z,1520660056.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:34:16.653Z,1520660056.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:34:17.058Z,1520660057.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:34:17.454Z,1520660057.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:34:17.833Z,1520660057.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:34:18.251Z,1520660058.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:34:18.650Z,1520660058.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:34:19.062Z,1520660059.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:34:19.466Z,1520660059.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:34:19.840Z,1520660059.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:34:20.241Z,1520660060.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:34:20.663Z,1520660060.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:34:21.066Z,1520660061.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:34:21.461Z,1520660061.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:34:21.838Z,1520660061.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:34:22.238Z,1520660062.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:34:22.646Z,1520660062.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:34:23.053Z,1520660063.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:34:23.442Z,1520660063.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:34:23.847Z,1520660063.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:34:24.257Z,1520660064.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:34:24.651Z,1520660064.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:34:25.046Z,1520660065.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:34:25.465Z,1520660065.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:34:25.843Z,1520660065.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:34:26.242Z,1520660066.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:34:26.653Z,1520660066.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:34:27.055Z,1520660067.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:34:27.457Z,1520660067.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:34:27.848Z,1520660067.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:34:28.259Z,1520660068.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:34:28.673Z,1520660068.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:34:29.056Z,1520660069.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:34:29.456Z,1520660069.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:34:29.850Z,1520660069.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:34:30.230Z,1520660070.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:34:30.660Z,1520660070.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:34:31.059Z,1520660071.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:34:31.467Z,1520660071.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:34:31.836Z,1520660071.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:34:32.235Z,1520660072.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:34:32.662Z,1520660072.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:34:33.046Z,1520660073.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:34:33.446Z,1520660073.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:34:33.837Z,1520660073.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:34:34.239Z,1520660074.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:34:34.659Z,1520660074.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:34:35.063Z,1520660075.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:34:35.449Z,1520660075.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:34:35.836Z,1520660075.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:34:36.249Z,1520660076.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:34:36.654Z,1520660076.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:34:37.052Z,1520660077.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:34:37.462Z,1520660077.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:34:37.861Z,1520660077.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:34:38.249Z,1520660078.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:34:38.654Z,1520660078.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:34:39.057Z,1520660079.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:34:39.451Z,1520660079.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:34:39.843Z,1520660079.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:34:40.237Z,1520660080.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:34:40.655Z,1520660080.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:34:41.058Z,1520660081.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:34:41.473Z,1520660081.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:34:41.849Z,1520660081.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:34:42.246Z,1520660082.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:34:42.652Z,1520660082.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:34:43.054Z,1520660083.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:34:43.451Z,1520660083.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:34:43.854Z,1520660083.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:34:44.248Z,1520660084.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:34:44.657Z,1520660084.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:34:45.061Z,1520660085.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:34:45.461Z,1520660085.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:34:45.849Z,1520660085.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:34:46.246Z,1520660086.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:34:46.661Z,1520660086.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:34:47.055Z,1520660087.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:34:47.457Z,1520660087.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:34:47.850Z,1520660087.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:34:48.250Z,1520660088.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:34:48.654Z,1520660088.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:34:49.061Z,1520660089.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:34:49.460Z,1520660089.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:34:49.864Z,1520660089.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:34:50.232Z,1520660090.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:34:50.652Z,1520660090.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:34:51.053Z,1520660091.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:34:51.451Z,1520660091.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:34:51.851Z,1520660091.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:34:52.231Z,1520660092.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:34:52.658Z,1520660092.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:34:53.063Z,1520660093.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:34:56.168Z,1520660096.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:34:56.172Z,1520660096.172 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-03-10T05:29:55.7Z
2018-03-10T05:34:56.172Z,1520660096.172 [Default:CheckIn:Read_GPS] Stopped
2018-03-10T05:34:56.172Z,1520660096.172 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-03-10T05:34:56.325Z,1520660096.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:34:56.804Z,1520660096.804 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20180310T051512/Courier0008.lzma
2018-03-10T05:34:56.852Z,1520660096.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:34:57.105Z,1520660097.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:34:57.468Z,1520660097.468 [DataOverHttps](INFO): Moved sent file to Logs/20180310T051512/Courier0008.lzma.bak
2018-03-10T05:34:57.468Z,1520660097.468 [DataOverHttps](INFO): SBD MOMSN=8001926
2018-03-10T05:34:57.540Z,1520660097.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:34:58.188Z,1520660098.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:34:58.349Z,1520660098.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:34:58.745Z,1520660098.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:35:01.859Z,1520660101.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:35:02.056Z,1520660102.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:35:02.446Z,1520660102.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:35:02.906Z,1520660102.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:35:03.239Z,1520660103.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:35:03.634Z,1520660103.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:35:04.037Z,1520660104.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:35:07.143Z,1520660107.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:35:07.321Z,1520660107.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:35:07.660Z,1520660107.660 [DataOverHttps](INFO): Sending 235 bytes from file Logs/20180310T051512/Express0009.lzma
2018-03-10T05:35:07.729Z,1520660107.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:35:08.118Z,1520660108.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:35:08.457Z,1520660108.457 [DataOverHttps](INFO): Moved sent file to Logs/20180310T051512/Express0009.lzma.bak
2018-03-10T05:35:08.457Z,1520660108.457 [DataOverHttps](INFO): SBD MOMSN=8001928
2018-03-10T05:35:08.534Z,1520660108.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:35:09.181Z,1520660109.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:35:09.184Z,1520660109.184 [Default:CheckIn:Read_Iridium] Stopped
2018-03-10T05:35:09.185Z,1520660109.185 [Default:CheckIn:C.Wait] Running Loop=1
2018-03-10T05:35:09.185Z,1520660109.185 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-03-10T05:35:09.328Z,1520660109.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:35:09.734Z,1520660109.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:35:12.870Z,1520660112.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:35:13.027Z,1520660113.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:35:13.422Z,1520660113.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:35:13.836Z,1520660113.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:35:14.227Z,1520660114.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:35:14.666Z,1520660114.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:35:15.033Z,1520660115.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:35:15.432Z,1520660115.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:35:15.821Z,1520660115.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:35:16.222Z,1520660116.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:35:16.630Z,1520660116.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:35:17.034Z,1520660117.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:35:17.431Z,1520660117.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:35:17.821Z,1520660117.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:35:18.223Z,1520660118.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:35:18.636Z,1520660118.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:35:19.035Z,1520660119.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:35:19.437Z,1520660119.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:35:19.826Z,1520660119.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:35:20.232Z,1520660120.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:35:20.630Z,1520660120.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:35:21.037Z,1520660121.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:35:21.457Z,1520660121.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:35:21.836Z,1520660121.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:35:22.230Z,1520660122.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:35:22.312Z,1520660122.312 [CBIT](DEBUG): EFC running - data check-sum false
2018-03-10T05:35:22.633Z,1520660122.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:35:23.033Z,1520660123.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:35:23.444Z,1520660123.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:35:23.822Z,1520660123.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:35:24.222Z,1520660124.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:35:24.636Z,1520660124.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:35:25.037Z,1520660125.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:35:25.433Z,1520660125.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:35:25.832Z,1520660125.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:35:26.226Z,1520660126.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:35:26.640Z,1520660126.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:35:27.053Z,1520660127.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:35:27.428Z,1520660127.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:35:27.836Z,1520660127.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:35:28.236Z,1520660128.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:35:28.631Z,1520660128.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:35:29.031Z,1520660129.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:35:29.436Z,1520660129.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:35:29.836Z,1520660129.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:35:30.213Z,1520660130.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:35:30.635Z,1520660130.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:35:31.034Z,1520660131.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:35:31.434Z,1520660131.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:35:31.837Z,1520660131.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:35:32.237Z,1520660132.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:35:32.635Z,1520660132.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:35:33.041Z,1520660133.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:35:33.445Z,1520660133.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:35:33.846Z,1520660133.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:35:34.231Z,1520660134.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:35:34.641Z,1520660134.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:35:35.045Z,1520660135.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:35:35.440Z,1520660135.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:35:35.813Z,1520660135.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:35:36.240Z,1520660136.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:35:36.639Z,1520660136.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:35:37.034Z,1520660137.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:35:37.440Z,1520660137.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:35:37.840Z,1520660137.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:35:38.214Z,1520660138.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:35:38.637Z,1520660138.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:35:39.053Z,1520660139.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:35:39.460Z,1520660139.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:35:39.818Z,1520660139.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:35:40.218Z,1520660140.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:35:40.637Z,1520660140.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:35:41.038Z,1520660141.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:35:41.443Z,1520660141.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:35:41.821Z,1520660141.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:35:42.218Z,1520660142.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:35:42.641Z,1520660142.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:35:43.041Z,1520660143.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:35:43.441Z,1520660143.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:35:43.819Z,1520660143.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:35:44.235Z,1520660144.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:35:44.640Z,1520660144.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:35:45.070Z,1520660145.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:35:45.437Z,1520660145.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:35:45.904Z,1520660145.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:35:46.238Z,1520660146.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:35:46.630Z,1520660146.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:35:47.057Z,1520660147.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:35:47.433Z,1520660147.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:35:47.829Z,1520660147.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:35:48.228Z,1520660148.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:35:48.670Z,1520660148.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:35:49.032Z,1520660149.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:35:49.469Z,1520660149.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:35:49.825Z,1520660149.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:35:50.222Z,1520660150.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:35:50.670Z,1520660150.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:35:51.044Z,1520660151.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:35:51.428Z,1520660151.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:35:51.874Z,1520660151.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:35:52.239Z,1520660152.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:35:52.653Z,1520660152.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:35:53.029Z,1520660153.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:35:53.429Z,1520660153.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:35:53.837Z,1520660153.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:35:54.210Z,1520660154.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:35:54.641Z,1520660154.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:35:55.026Z,1520660155.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:35:55.430Z,1520660155.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:35:55.827Z,1520660155.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:35:56.233Z,1520660156.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:35:56.631Z,1520660156.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:35:57.033Z,1520660157.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:35:57.428Z,1520660157.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:35:57.838Z,1520660157.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:35:58.235Z,1520660158.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:35:58.649Z,1520660158.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:35:59.032Z,1520660159.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:35:59.440Z,1520660159.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:35:59.812Z,1520660159.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:36:00.237Z,1520660160.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:36:00.635Z,1520660160.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:36:01.034Z,1520660161.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:36:01.430Z,1520660161.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:36:01.832Z,1520660161.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:36:02.214Z,1520660162.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:36:02.631Z,1520660162.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:36:03.036Z,1520660163.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:36:03.432Z,1520660163.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:36:03.837Z,1520660163.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:36:04.231Z,1520660164.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:36:04.630Z,1520660164.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:36:05.041Z,1520660165.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:36:05.444Z,1520660165.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:36:05.821Z,1520660165.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:36:06.219Z,1520660166.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:36:06.640Z,1520660166.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:36:07.041Z,1520660167.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:36:07.437Z,1520660167.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:36:07.818Z,1520660167.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:36:08.237Z,1520660168.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:36:08.621Z,1520660168.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:36:09.038Z,1520660169.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:36:09.419Z,1520660169.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:36:09.871Z,1520660169.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:36:12.918Z,1520660172.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:36:13.113Z,1520660173.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:36:13.494Z,1520660173.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:36:13.892Z,1520660173.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:36:14.273Z,1520660174.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:36:14.669Z,1520660174.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:36:15.066Z,1520660175.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:36:15.473Z,1520660175.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:36:15.891Z,1520660175.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:36:16.300Z,1520660176.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:36:16.690Z,1520660176.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:36:17.092Z,1520660177.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:36:17.471Z,1520660177.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:36:17.904Z,1520660177.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:36:18.277Z,1520660178.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:36:18.699Z,1520660178.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:36:19.098Z,1520660179.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:36:19.497Z,1520660179.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:36:19.876Z,1520660179.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:36:20.270Z,1520660180.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:36:20.677Z,1520660180.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:36:21.071Z,1520660181.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:36:21.477Z,1520660181.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:36:21.895Z,1520660181.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:36:22.299Z,1520660182.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:36:22.697Z,1520660182.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:36:23.069Z,1520660183.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:36:23.501Z,1520660183.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:36:23.897Z,1520660183.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:36:24.269Z,1520660184.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:36:24.703Z,1520660184.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:36:25.125Z,1520660185.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:36:25.512Z,1520660185.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:36:25.917Z,1520660185.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:36:26.324Z,1520660186.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:36:26.665Z,1520660186.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:36:27.072Z,1520660187.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:36:27.477Z,1520660187.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:36:27.878Z,1520660187.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:36:28.278Z,1520660188.278 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:36:28.278Z,1520660188.278 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 7
2018-03-10T05:36:28.278Z,1520660188.278 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-03-10T05:36:28.280Z,1520660188.280 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:36:28.280Z,1520660188.280 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 7
2018-03-10T05:36:28.280Z,1520660188.280 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-03-10T05:36:28.282Z,1520660188.282 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:36:28.282Z,1520660188.282 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 7
2018-03-10T05:36:28.282Z,1520660188.282 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-10T05:36:28.355Z,1520660188.355 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-03-10T05:36:28.355Z,1520660188.355 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-03-10T05:36:28.355Z,1520660188.355 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-10T05:36:28.767Z,1520660188.767 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-03-10T05:36:28.767Z,1520660188.767 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 7
2018-03-10T05:36:28.768Z,1520660188.768 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-03-10T05:36:28.768Z,1520660188.768 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 7
2018-03-10T05:36:28.768Z,1520660188.768 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-10T05:36:28.768Z,1520660188.768 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 7
2018-03-10T05:36:29.072Z,1520660189.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-03-10T05:36:29.072Z,1520660189.072 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-03-10T05:36:29.072Z,1520660189.072 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-03-10T05:36:29.073Z,1520660189.073 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-03-10T05:36:29.073Z,1520660189.073 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-03-10T05:36:29.073Z,1520660189.073 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-03-10T05:36:29.074Z,1520660189.074 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-10T05:36:29.074Z,1520660189.074 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-10T05:36:29.075Z,1520660189.075 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-10T05:36:29.524Z,1520660189.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-03-10T05:36:29.525Z,1520660189.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:36:29.873Z,1520660189.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-03-10T05:36:29.874Z,1520660189.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:36:30.284Z,1520660190.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-03-10T05:36:30.285Z,1520660190.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:36:30.708Z,1520660190.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-03-10T05:36:30.708Z,1520660190.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:36:31.078Z,1520660191.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-03-10T05:36:31.079Z,1520660191.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:36:31.478Z,1520660191.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-03-10T05:36:31.479Z,1520660191.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:36:31.893Z,1520660191.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-03-10T05:36:31.894Z,1520660191.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:36:32.277Z,1520660192.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-03-10T05:36:32.277Z,1520660192.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:36:32.683Z,1520660192.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-03-10T05:36:32.684Z,1520660192.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:36:33.085Z,1520660193.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-03-10T05:36:33.086Z,1520660193.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:36:33.482Z,1520660193.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-03-10T05:36:33.482Z,1520660193.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:36:33.893Z,1520660193.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-03-10T05:36:33.894Z,1520660193.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:36:34.296Z,1520660194.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-03-10T05:36:34.297Z,1520660194.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:36:34.692Z,1520660194.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-03-10T05:36:34.693Z,1520660194.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:36:35.065Z,1520660195.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-03-10T05:36:35.066Z,1520660195.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:36:35.493Z,1520660195.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-03-10T05:36:35.494Z,1520660195.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:36:35.863Z,1520660195.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-03-10T05:36:35.864Z,1520660195.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:36:36.269Z,1520660196.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-03-10T05:36:36.270Z,1520660196.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:36:36.697Z,1520660196.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-03-10T05:36:36.698Z,1520660196.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:36:37.087Z,1520660197.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-03-10T05:36:37.088Z,1520660197.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:36:37.494Z,1520660197.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-03-10T05:36:37.495Z,1520660197.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:36:37.896Z,1520660197.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-03-10T05:36:37.897Z,1520660197.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:36:38.275Z,1520660198.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-03-10T05:36:38.276Z,1520660198.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:36:38.665Z,1520660198.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-03-10T05:36:38.666Z,1520660198.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:36:39.093Z,1520660199.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-03-10T05:36:39.094Z,1520660199.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:36:39.469Z,1520660199.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-03-10T05:36:39.470Z,1520660199.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:36:39.894Z,1520660199.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-03-10T05:36:39.895Z,1520660199.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:36:40.294Z,1520660200.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-03-10T05:36:40.299Z,1520660200.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:36:40.678Z,1520660200.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-03-10T05:36:40.695Z,1520660200.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:36:41.069Z,1520660201.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-03-10T05:36:41.069Z,1520660201.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:36:41.469Z,1520660201.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-03-10T05:36:41.470Z,1520660201.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:36:41.870Z,1520660201.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-03-10T05:36:41.871Z,1520660201.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:36:42.300Z,1520660202.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-03-10T05:36:42.301Z,1520660202.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:36:42.708Z,1520660202.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-03-10T05:36:42.709Z,1520660202.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:36:43.073Z,1520660203.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-03-10T05:36:43.074Z,1520660203.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:36:43.478Z,1520660203.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-03-10T05:36:43.479Z,1520660203.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:36:43.879Z,1520660203.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-03-10T05:36:43.880Z,1520660203.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:36:44.280Z,1520660204.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-03-10T05:36:44.281Z,1520660204.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:36:44.676Z,1520660204.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-03-10T05:36:44.677Z,1520660204.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:36:45.075Z,1520660205.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-03-10T05:36:45.076Z,1520660205.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:36:45.476Z,1520660205.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-03-10T05:36:45.477Z,1520660205.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:36:45.878Z,1520660205.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-03-10T05:36:45.879Z,1520660205.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:36:46.303Z,1520660206.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-03-10T05:36:46.304Z,1520660206.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:36:46.678Z,1520660206.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2018-03-10T05:36:46.679Z,1520660206.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:36:47.080Z,1520660207.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2018-03-10T05:36:47.081Z,1520660207.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:36:47.473Z,1520660207.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2018-03-10T05:36:47.474Z,1520660207.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:36:47.880Z,1520660207.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2018-03-10T05:36:47.881Z,1520660207.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:36:48.273Z,1520660208.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 20.0 s old, using for 20.0 s.
2018-03-10T05:36:48.274Z,1520660208.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:36:48.683Z,1520660208.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:36:49.079Z,1520660209.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:36:49.478Z,1520660209.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:36:49.886Z,1520660209.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:36:50.280Z,1520660210.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:36:50.707Z,1520660210.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:36:51.076Z,1520660211.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:36:51.475Z,1520660211.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:36:51.879Z,1520660211.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:36:52.279Z,1520660212.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:36:52.679Z,1520660212.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:36:53.073Z,1520660213.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:36:53.481Z,1520660213.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:36:53.881Z,1520660213.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:36:54.273Z,1520660214.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:36:54.679Z,1520660214.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:36:55.089Z,1520660215.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:36:55.509Z,1520660215.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:36:55.881Z,1520660215.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:36:56.281Z,1520660216.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:36:56.685Z,1520660216.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:36:57.087Z,1520660217.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:36:57.487Z,1520660217.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:36:57.889Z,1520660217.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:36:58.297Z,1520660218.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:36:58.693Z,1520660218.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:36:59.065Z,1520660219.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:36:59.466Z,1520660219.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:36:59.865Z,1520660219.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:37:00.293Z,1520660220.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:37:00.691Z,1520660220.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:37:01.090Z,1520660221.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:37:01.493Z,1520660221.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:37:01.867Z,1520660221.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:37:02.265Z,1520660222.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:37:02.666Z,1520660222.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:37:03.077Z,1520660223.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:37:03.500Z,1520660223.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:37:03.902Z,1520660223.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:37:04.303Z,1520660224.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:37:04.679Z,1520660224.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:37:05.073Z,1520660225.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:37:05.475Z,1520660225.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:37:05.873Z,1520660225.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:37:06.273Z,1520660226.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:37:06.679Z,1520660226.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:37:07.086Z,1520660227.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:37:07.479Z,1520660227.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:37:07.881Z,1520660227.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:37:08.289Z,1520660228.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:37:08.673Z,1520660228.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:37:09.075Z,1520660229.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:37:09.476Z,1520660229.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:37:09.882Z,1520660229.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:37:13.012Z,1520660233.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:37:13.165Z,1520660233.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:37:13.560Z,1520660233.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:37:13.959Z,1520660233.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:37:14.362Z,1520660234.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:37:14.766Z,1520660234.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:37:15.168Z,1520660235.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:37:15.574Z,1520660235.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:37:15.971Z,1520660235.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:37:16.362Z,1520660236.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:37:16.767Z,1520660236.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:37:17.166Z,1520660237.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:37:17.570Z,1520660237.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:37:17.973Z,1520660237.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:37:18.373Z,1520660238.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:37:18.770Z,1520660238.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:37:19.168Z,1520660239.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:37:19.545Z,1520660239.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:37:19.947Z,1520660239.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:37:20.348Z,1520660240.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:37:20.789Z,1520660240.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:37:21.189Z,1520660241.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:37:21.561Z,1520660241.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:37:21.953Z,1520660241.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:37:22.355Z,1520660242.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:37:22.761Z,1520660242.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:37:23.154Z,1520660243.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:37:23.553Z,1520660243.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:37:23.959Z,1520660243.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:37:24.365Z,1520660244.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:37:24.759Z,1520660244.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:37:25.154Z,1520660245.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:37:25.553Z,1520660245.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:37:25.955Z,1520660245.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:37:26.349Z,1520660246.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:37:26.758Z,1520660246.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:37:27.184Z,1520660247.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:37:27.566Z,1520660247.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:37:27.953Z,1520660247.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:37:28.363Z,1520660248.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:37:28.757Z,1520660248.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:37:29.155Z,1520660249.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:37:29.554Z,1520660249.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:37:29.959Z,1520660249.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:37:30.358Z,1520660250.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:37:30.759Z,1520660250.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:37:31.149Z,1520660251.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:37:31.553Z,1520660251.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:37:31.956Z,1520660251.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:37:32.349Z,1520660252.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:37:32.759Z,1520660252.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:37:33.165Z,1520660253.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:37:33.590Z,1520660253.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:37:33.961Z,1520660253.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:37:34.361Z,1520660254.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:37:34.761Z,1520660254.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:37:35.154Z,1520660255.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:37:35.554Z,1520660255.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:37:35.962Z,1520660255.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:37:36.365Z,1520660256.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:37:36.762Z,1520660256.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:37:37.149Z,1520660257.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:37:37.553Z,1520660257.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:37:37.961Z,1520660257.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:37:38.349Z,1520660258.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:37:38.714Z,1520660258.714 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-03-10T05:37:38.714Z,1520660258.714 [NAL9602] Data Fault, FailCount= 3
2018-03-10T05:37:38.714Z,1520660258.714 [NAL9602](ERROR): Data Fault
2018-03-10T05:37:38.765Z,1520660258.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:37:38.847Z,1520660258.847 [CBIT](ERROR): Data Fault in component: NAL9602
2018-03-10T05:37:39.116Z,1520660259.116 [NAL9602](INFO): Powering down
2018-03-10T05:37:39.163Z,1520660259.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:37:39.553Z,1520660259.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:37:39.953Z,1520660259.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:37:40.031Z,1520660260.031 [CBIT](INFO): Clearing failed state for component NAL9602
2018-03-10T05:37:40.031Z,1520660260.031 [NAL9602] No Fault, FailCount= 3
2018-03-10T05:37:40.361Z,1520660260.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:37:40.753Z,1520660260.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:37:41.153Z,1520660261.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:37:41.552Z,1520660261.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:37:41.955Z,1520660261.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:37:42.361Z,1520660262.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:37:42.753Z,1520660262.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:37:43.155Z,1520660263.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:37:43.556Z,1520660263.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:37:43.961Z,1520660263.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:37:44.353Z,1520660264.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:37:44.754Z,1520660264.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:37:45.154Z,1520660265.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:37:45.563Z,1520660265.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:37:45.959Z,1520660265.959 [BPC1](ERROR): Failed to receive battery data
2018-03-10T05:37:45.959Z,1520660265.959 [BPC1] Communications Fault, FailCount= 1
2018-03-10T05:37:45.959Z,1520660265.959 [BPC1](ERROR): Communications Fault
2018-03-10T05:37:45.973Z,1520660265.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:37:46.083Z,1520660266.083 [CBIT](ERROR): Communications Fault in component: BPC1
2018-03-10T05:37:46.353Z,1520660266.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:37:46.769Z,1520660266.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:37:47.152Z,1520660267.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:37:47.259Z,1520660267.259 [CBIT](INFO): Clearing failed state for component BPC1
2018-03-10T05:37:47.259Z,1520660267.259 [BPC1] No Fault, FailCount= 1
2018-03-10T05:37:47.636Z,1520660267.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:37:47.963Z,1520660267.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:37:48.365Z,1520660268.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:37:48.761Z,1520660268.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:37:49.164Z,1520660269.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:37:49.565Z,1520660269.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:37:49.980Z,1520660269.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:37:50.337Z,1520660270.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:37:50.770Z,1520660270.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:37:51.173Z,1520660271.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:37:51.561Z,1520660271.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:37:51.965Z,1520660271.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:37:52.345Z,1520660272.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:37:52.744Z,1520660272.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:37:53.152Z,1520660273.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:37:53.553Z,1520660273.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:37:53.945Z,1520660273.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:37:54.349Z,1520660274.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:37:54.746Z,1520660274.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:37:55.152Z,1520660275.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:37:55.575Z,1520660275.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:37:55.950Z,1520660275.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:37:56.345Z,1520660276.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:37:56.749Z,1520660276.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:37:57.145Z,1520660277.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:37:57.551Z,1520660277.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:37:57.950Z,1520660277.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:37:58.345Z,1520660278.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:37:58.745Z,1520660278.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:37:59.149Z,1520660279.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:37:59.545Z,1520660279.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:37:59.953Z,1520660279.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:38:00.349Z,1520660280.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:38:00.752Z,1520660280.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:38:01.145Z,1520660281.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:38:01.549Z,1520660281.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:38:01.952Z,1520660281.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:38:02.344Z,1520660282.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:38:02.748Z,1520660282.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:38:03.144Z,1520660283.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:38:03.545Z,1520660283.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:38:03.953Z,1520660283.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:38:04.344Z,1520660284.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:38:04.752Z,1520660284.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:38:05.148Z,1520660285.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:38:05.544Z,1520660285.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:38:05.951Z,1520660285.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:38:06.348Z,1520660286.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:38:06.744Z,1520660286.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:38:07.144Z,1520660287.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:38:07.553Z,1520660287.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:38:07.951Z,1520660287.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:38:08.351Z,1520660288.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:38:08.748Z,1520660288.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:38:09.144Z,1520660289.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:38:09.512Z,1520660289.512 [NAL9602](INFO): Powering up NAL9602
2018-03-10T05:38:09.550Z,1520660289.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:38:09.951Z,1520660289.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:38:13.060Z,1520660293.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:38:13.240Z,1520660293.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:38:13.630Z,1520660293.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:38:14.032Z,1520660294.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:38:14.434Z,1520660294.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:38:14.833Z,1520660294.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:38:15.232Z,1520660295.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:38:15.630Z,1520660295.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:38:16.034Z,1520660296.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:38:16.417Z,1520660296.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:38:16.814Z,1520660296.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:38:17.217Z,1520660297.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:38:17.617Z,1520660297.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:38:18.007Z,1520660298.007 [BPC1](FAULT): Failed to initialize
2018-03-10T05:38:18.007Z,1520660298.007 [BPC1] Communications Fault, FailCount= 2
2018-03-10T05:38:18.007Z,1520660298.007 [BPC1](ERROR): Communications Fault
2018-03-10T05:38:18.015Z,1520660298.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:38:18.111Z,1520660298.111 [CBIT](ERROR): Communications Fault in component: BPC1
2018-03-10T05:38:18.417Z,1520660298.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:38:18.813Z,1520660298.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:38:19.217Z,1520660299.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:38:19.295Z,1520660299.295 [CBIT](INFO): Clearing failed state for component BPC1
2018-03-10T05:38:19.295Z,1520660299.295 [BPC1] No Fault, FailCount= 2
2018-03-10T05:38:19.693Z,1520660299.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:38:20.094Z,1520660300.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:38:20.386Z,1520660300.386 [NAL9602](INFO): NAL9602 initialized
2018-03-10T05:38:20.418Z,1520660300.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:38:20.818Z,1520660300.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:38:21.230Z,1520660301.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:38:21.630Z,1520660301.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:38:22.030Z,1520660302.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:38:22.417Z,1520660302.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:38:22.817Z,1520660302.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:38:23.218Z,1520660303.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:38:23.618Z,1520660303.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:38:24.017Z,1520660304.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:38:24.431Z,1520660304.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:38:24.840Z,1520660304.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:38:25.238Z,1520660305.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:38:25.633Z,1520660305.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:38:26.033Z,1520660306.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:38:26.430Z,1520660306.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:38:26.830Z,1520660306.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:38:27.237Z,1520660307.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:38:27.638Z,1520660307.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:38:28.039Z,1520660308.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:38:28.431Z,1520660308.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:38:28.830Z,1520660308.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:38:29.229Z,1520660309.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:38:29.630Z,1520660309.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:38:30.030Z,1520660310.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:38:30.439Z,1520660310.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:38:30.841Z,1520660310.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:38:31.240Z,1520660311.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:38:31.636Z,1520660311.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:38:32.031Z,1520660312.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:38:32.429Z,1520660312.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:38:32.831Z,1520660312.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:38:33.240Z,1520660313.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:38:33.647Z,1520660313.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:38:34.041Z,1520660314.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:38:34.430Z,1520660314.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:38:34.829Z,1520660314.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:38:35.230Z,1520660315.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:38:35.631Z,1520660315.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:38:36.030Z,1520660316.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:38:36.440Z,1520660316.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:38:36.843Z,1520660316.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:38:37.240Z,1520660317.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:38:37.637Z,1520660317.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:38:38.032Z,1520660318.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:38:38.429Z,1520660318.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:38:38.836Z,1520660318.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:38:39.240Z,1520660319.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:38:39.638Z,1520660319.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:38:40.038Z,1520660320.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:38:40.431Z,1520660320.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:38:40.837Z,1520660320.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:38:41.234Z,1520660321.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:38:41.636Z,1520660321.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:38:42.038Z,1520660322.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:38:42.439Z,1520660322.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:38:42.842Z,1520660322.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:38:43.240Z,1520660323.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:38:43.632Z,1520660323.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:38:44.044Z,1520660324.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:38:44.417Z,1520660324.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:38:44.818Z,1520660324.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:38:45.248Z,1520660325.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:38:45.642Z,1520660325.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:38:46.041Z,1520660326.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:38:46.434Z,1520660326.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:38:46.814Z,1520660326.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:38:47.218Z,1520660327.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:38:47.621Z,1520660327.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:38:48.017Z,1520660328.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:38:48.439Z,1520660328.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:38:48.841Z,1520660328.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:38:49.242Z,1520660329.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:38:49.618Z,1520660329.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:38:50.012Z,1520660330.012 [BPC1](FAULT): Failed to initialize
2018-03-10T05:38:50.013Z,1520660330.013 [BPC1] Communications Fault, FailCount= 3
2018-03-10T05:38:50.013Z,1520660330.013 [BPC1](ERROR): Communications Fault
2018-03-10T05:38:50.020Z,1520660330.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:38:50.119Z,1520660330.119 [CBIT](ERROR): Communications Fault in component: BPC1
2018-03-10T05:38:50.418Z,1520660330.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:38:50.818Z,1520660330.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:38:51.249Z,1520660331.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:38:51.331Z,1520660331.331 [CBIT](INFO): Clearing failed state for component BPC1
2018-03-10T05:38:51.331Z,1520660331.331 [BPC1] No Fault, FailCount= 3
2018-03-10T05:38:51.693Z,1520660331.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:38:52.042Z,1520660332.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:38:52.425Z,1520660332.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:38:52.818Z,1520660332.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:38:53.222Z,1520660333.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:38:53.623Z,1520660333.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:38:54.017Z,1520660334.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:38:54.449Z,1520660334.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:38:54.845Z,1520660334.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:38:55.246Z,1520660335.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:38:55.621Z,1520660335.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:38:56.029Z,1520660336.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:38:56.425Z,1520660336.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:38:56.821Z,1520660336.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:38:57.252Z,1520660337.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:38:57.630Z,1520660337.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:38:58.050Z,1520660338.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:38:58.429Z,1520660338.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:38:58.822Z,1520660338.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:38:59.221Z,1520660339.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:38:59.623Z,1520660339.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:39:00.028Z,1520660340.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:39:00.441Z,1520660340.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:39:00.834Z,1520660340.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:39:01.233Z,1520660341.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:39:01.626Z,1520660341.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:39:02.026Z,1520660342.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:39:02.426Z,1520660342.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:39:02.826Z,1520660342.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:39:03.234Z,1520660343.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:39:03.630Z,1520660343.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:39:04.041Z,1520660344.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:39:04.428Z,1520660344.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:39:04.825Z,1520660344.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:39:05.226Z,1520660345.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:39:05.629Z,1520660345.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:39:06.033Z,1520660346.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:39:06.441Z,1520660346.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:39:06.835Z,1520660346.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:39:07.234Z,1520660347.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:39:07.626Z,1520660347.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:39:08.029Z,1520660348.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:39:08.426Z,1520660348.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:39:08.828Z,1520660348.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:39:09.235Z,1520660349.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:39:09.634Z,1520660349.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:39:10.034Z,1520660350.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:39:13.132Z,1520660353.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:39:13.288Z,1520660353.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:39:13.685Z,1520660353.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:39:14.082Z,1520660354.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:39:14.486Z,1520660354.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:39:14.865Z,1520660354.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:39:15.258Z,1520660355.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:39:15.658Z,1520660355.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:39:16.058Z,1520660356.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:39:16.489Z,1520660356.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:39:16.891Z,1520660356.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:39:17.291Z,1520660357.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:39:17.659Z,1520660357.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:39:18.069Z,1520660358.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:39:18.465Z,1520660358.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:39:18.857Z,1520660358.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:39:19.287Z,1520660359.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:39:19.690Z,1520660359.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:39:20.093Z,1520660360.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:39:20.462Z,1520660360.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:39:20.861Z,1520660360.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:39:21.269Z,1520660361.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:39:21.661Z,1520660361.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:39:22.055Z,1520660362.055 [BPC1](FAULT): Failed to initialize
2018-03-10T05:39:22.055Z,1520660362.055 [BPC1] Communications Fault, FailCount= 4
2018-03-10T05:39:22.055Z,1520660362.055 [BPC1](ERROR): Communications Fault
2018-03-10T05:39:22.062Z,1520660362.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:39:22.143Z,1520660362.143 [CBIT](ERROR): Communications Fault in component: BPC1
2018-03-10T05:39:22.471Z,1520660362.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:39:22.870Z,1520660362.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:39:23.270Z,1520660363.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:39:23.363Z,1520660363.363 [CBIT](INFO): Clearing failed state for component BPC1
2018-03-10T05:39:23.363Z,1520660363.363 [BPC1] No Fault, FailCount= 4
2018-03-10T05:39:23.738Z,1520660363.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:39:24.065Z,1520660364.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:39:24.466Z,1520660364.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:39:24.865Z,1520660364.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:39:25.271Z,1520660365.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:39:25.678Z,1520660365.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:39:26.071Z,1520660366.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:39:26.478Z,1520660366.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:39:26.866Z,1520660366.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:39:27.267Z,1520660367.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:39:27.662Z,1520660367.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:39:28.066Z,1520660368.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:39:28.472Z,1520660368.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:39:28.877Z,1520660368.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:39:29.271Z,1520660369.271 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:39:29.271Z,1520660369.271 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 8
2018-03-10T05:39:29.271Z,1520660369.271 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-03-10T05:39:29.273Z,1520660369.273 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:39:29.273Z,1520660369.273 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 8
2018-03-10T05:39:29.273Z,1520660369.273 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-03-10T05:39:29.275Z,1520660369.275 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:39:29.275Z,1520660369.275 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 8
2018-03-10T05:39:29.275Z,1520660369.275 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-10T05:39:29.367Z,1520660369.367 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-03-10T05:39:29.367Z,1520660369.367 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-03-10T05:39:29.367Z,1520660369.367 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-10T05:39:29.743Z,1520660369.743 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-03-10T05:39:29.743Z,1520660369.743 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 8
2018-03-10T05:39:29.744Z,1520660369.744 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-03-10T05:39:29.744Z,1520660369.744 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 8
2018-03-10T05:39:29.744Z,1520660369.744 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-10T05:39:29.744Z,1520660369.744 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 8
2018-03-10T05:39:30.072Z,1520660370.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-03-10T05:39:30.073Z,1520660370.073 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-03-10T05:39:30.073Z,1520660370.073 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-03-10T05:39:30.074Z,1520660370.074 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-03-10T05:39:30.074Z,1520660370.074 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-03-10T05:39:30.074Z,1520660370.074 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-03-10T05:39:30.075Z,1520660370.075 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-10T05:39:30.075Z,1520660370.075 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-10T05:39:30.075Z,1520660370.075 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-10T05:39:30.474Z,1520660370.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-03-10T05:39:30.475Z,1520660370.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:39:30.865Z,1520660370.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-03-10T05:39:30.866Z,1520660370.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:39:31.277Z,1520660371.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-03-10T05:39:31.278Z,1520660371.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:39:31.680Z,1520660371.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-03-10T05:39:31.681Z,1520660371.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:39:32.078Z,1520660372.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-03-10T05:39:32.079Z,1520660372.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:39:32.465Z,1520660372.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-03-10T05:39:32.465Z,1520660372.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:39:32.870Z,1520660372.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-03-10T05:39:32.871Z,1520660372.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:39:33.266Z,1520660373.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-03-10T05:39:33.268Z,1520660373.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:39:33.662Z,1520660373.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-03-10T05:39:33.663Z,1520660373.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:39:34.065Z,1520660374.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-03-10T05:39:34.066Z,1520660374.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:39:34.478Z,1520660374.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-03-10T05:39:34.479Z,1520660374.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:39:34.873Z,1520660374.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-03-10T05:39:34.874Z,1520660374.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:39:35.276Z,1520660375.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-03-10T05:39:35.277Z,1520660375.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:39:35.668Z,1520660375.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-03-10T05:39:35.669Z,1520660375.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:39:36.072Z,1520660376.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-03-10T05:39:36.073Z,1520660376.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:39:36.468Z,1520660376.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-03-10T05:39:36.469Z,1520660376.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:39:36.866Z,1520660376.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-03-10T05:39:36.868Z,1520660376.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:39:37.273Z,1520660377.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-03-10T05:39:37.274Z,1520660377.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:39:37.680Z,1520660377.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-03-10T05:39:37.681Z,1520660377.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:39:38.079Z,1520660378.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-03-10T05:39:38.080Z,1520660378.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:39:38.468Z,1520660378.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-03-10T05:39:38.468Z,1520660378.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:39:38.886Z,1520660378.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-03-10T05:39:38.887Z,1520660378.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:39:39.272Z,1520660379.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-03-10T05:39:39.273Z,1520660379.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:39:39.668Z,1520660379.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-03-10T05:39:39.669Z,1520660379.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:39:40.069Z,1520660380.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-03-10T05:39:40.070Z,1520660380.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:39:40.478Z,1520660380.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-03-10T05:39:40.480Z,1520660380.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:39:40.874Z,1520660380.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-03-10T05:39:40.875Z,1520660380.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:39:41.277Z,1520660381.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-03-10T05:39:41.278Z,1520660381.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:39:41.669Z,1520660381.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-03-10T05:39:41.670Z,1520660381.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:39:42.068Z,1520660382.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-03-10T05:39:42.069Z,1520660382.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:39:42.472Z,1520660382.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-03-10T05:39:42.473Z,1520660382.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:39:42.869Z,1520660382.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-03-10T05:39:42.869Z,1520660382.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:39:43.277Z,1520660383.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-03-10T05:39:43.278Z,1520660383.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:39:43.677Z,1520660383.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-03-10T05:39:43.678Z,1520660383.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:39:44.079Z,1520660384.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-03-10T05:39:44.080Z,1520660384.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:39:44.507Z,1520660384.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-03-10T05:39:44.508Z,1520660384.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:39:44.871Z,1520660384.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-03-10T05:39:44.872Z,1520660384.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:39:45.268Z,1520660385.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-03-10T05:39:45.269Z,1520660385.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:39:45.681Z,1520660385.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-03-10T05:39:45.682Z,1520660385.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:39:46.096Z,1520660386.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-03-10T05:39:46.097Z,1520660386.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:39:46.489Z,1520660386.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-03-10T05:39:46.490Z,1520660386.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:39:46.889Z,1520660386.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-03-10T05:39:46.890Z,1520660386.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:39:47.289Z,1520660387.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-03-10T05:39:47.289Z,1520660387.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:39:47.691Z,1520660387.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2018-03-10T05:39:47.692Z,1520660387.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:39:48.080Z,1520660388.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2018-03-10T05:39:48.081Z,1520660388.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:39:48.488Z,1520660388.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2018-03-10T05:39:48.489Z,1520660388.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:39:48.885Z,1520660388.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2018-03-10T05:39:48.886Z,1520660388.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:39:49.286Z,1520660389.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:39:49.744Z,1520660389.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:39:50.120Z,1520660390.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:39:50.463Z,1520660390.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:39:50.891Z,1520660390.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:39:51.269Z,1520660391.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:39:51.663Z,1520660391.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:39:52.063Z,1520660392.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:39:52.491Z,1520660392.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:39:52.870Z,1520660392.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:39:53.271Z,1520660393.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:39:53.666Z,1520660393.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:39:54.066Z,1520660394.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:39:54.468Z,1520660394.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:39:54.866Z,1520660394.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:39:55.267Z,1520660395.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:39:55.671Z,1520660395.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:39:56.072Z,1520660396.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:39:56.473Z,1520660396.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:39:56.896Z,1520660396.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:39:57.268Z,1520660397.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:39:57.662Z,1520660397.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:39:58.066Z,1520660398.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:39:58.471Z,1520660398.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:39:58.875Z,1520660398.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:39:59.271Z,1520660399.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:39:59.666Z,1520660399.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:40:00.073Z,1520660400.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:40:00.466Z,1520660400.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:40:00.867Z,1520660400.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:40:01.272Z,1520660401.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:40:01.676Z,1520660401.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:40:02.108Z,1520660402.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:40:02.461Z,1520660402.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:40:02.868Z,1520660402.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:40:03.273Z,1520660403.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:40:03.669Z,1520660403.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:40:04.070Z,1520660404.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:40:04.483Z,1520660404.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:40:04.879Z,1520660404.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:40:05.280Z,1520660405.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:40:05.666Z,1520660405.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:40:06.072Z,1520660406.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:40:06.477Z,1520660406.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:40:06.880Z,1520660406.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:40:07.285Z,1520660407.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:40:07.685Z,1520660407.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:40:08.080Z,1520660408.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:40:08.477Z,1520660408.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:40:08.879Z,1520660408.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:40:09.278Z,1520660409.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:40:09.668Z,1520660409.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:40:09.671Z,1520660409.671 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-03-10T05:40:09.672Z,1520660409.672 [Default:CheckIn:C.Wait] Stopped
2018-03-10T05:40:09.672Z,1520660409.672 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-03-10T05:40:09.672Z,1520660409.672 [Default:CheckIn:D] Running Loop=1
2018-03-10T05:40:10.120Z,1520660410.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:40:10.124Z,1520660410.124 [Default:CheckIn:D] Stopped
2018-03-10T05:40:10.124Z,1520660410.124 [Default:CheckIn:E] Running Loop=1
2018-03-10T05:40:13.382Z,1520660413.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:40:13.385Z,1520660413.385 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 20.870046 min 
2018-03-10T05:40:13.386Z,1520660413.386 [Default:CheckIn:E] Stopped
2018-03-10T05:40:13.386Z,1520660413.386 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-03-10T05:40:13.386Z,1520660413.386 [Default:CheckIn] Stopped
2018-03-10T05:40:13.386Z,1520660413.386 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-03-10T05:40:13.386Z,1520660413.386 [Default:CheckIn](INFO): Running loop #3
2018-03-10T05:40:13.386Z,1520660413.386 [Default:CheckIn] Running Loop=3
2018-03-10T05:40:13.386Z,1520660413.386 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-03-10T05:40:13.386Z,1520660413.386 [Default:CheckIn:Read_GPS] Running Loop=1
2018-03-10T05:40:13.564Z,1520660413.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:40:13.934Z,1520660413.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:40:14.333Z,1520660414.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:40:14.725Z,1520660414.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:40:15.130Z,1520660415.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:40:15.555Z,1520660415.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:40:15.938Z,1520660415.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:40:16.333Z,1520660416.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:40:16.726Z,1520660416.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:40:17.155Z,1520660417.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:40:17.531Z,1520660417.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:40:17.932Z,1520660417.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:40:18.333Z,1520660418.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:40:18.726Z,1520660418.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:40:19.131Z,1520660419.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:40:19.535Z,1520660419.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:40:19.932Z,1520660419.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:40:20.327Z,1520660420.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:40:20.727Z,1520660420.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:40:21.132Z,1520660421.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:40:21.559Z,1520660421.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:40:21.930Z,1520660421.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:40:22.330Z,1520660422.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:40:22.727Z,1520660422.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:40:23.127Z,1520660423.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:40:23.526Z,1520660423.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:40:23.926Z,1520660423.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:40:24.337Z,1520660424.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:40:24.771Z,1520660424.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:40:25.139Z,1520660425.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:40:25.533Z,1520660425.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:40:25.933Z,1520660425.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:40:26.328Z,1520660426.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:40:26.728Z,1520660426.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:40:27.138Z,1520660427.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:40:27.540Z,1520660427.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:40:27.939Z,1520660427.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:40:28.328Z,1520660428.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:40:28.741Z,1520660428.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:40:29.139Z,1520660429.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:40:29.540Z,1520660429.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:40:29.936Z,1520660429.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:40:30.328Z,1520660430.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:40:30.732Z,1520660430.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:40:31.141Z,1520660431.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:40:31.542Z,1520660431.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:40:31.939Z,1520660431.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:40:32.331Z,1520660432.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:40:32.728Z,1520660432.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:40:33.141Z,1520660433.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:40:33.540Z,1520660433.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:40:33.945Z,1520660433.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:40:34.349Z,1520660434.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:40:34.729Z,1520660434.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:40:35.142Z,1520660435.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:40:35.549Z,1520660435.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:40:35.938Z,1520660435.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:40:36.354Z,1520660436.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:40:36.731Z,1520660436.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:40:37.139Z,1520660437.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:40:37.542Z,1520660437.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:40:37.939Z,1520660437.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:40:38.330Z,1520660438.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:40:38.729Z,1520660438.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:40:39.139Z,1520660439.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:40:39.543Z,1520660439.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:40:39.944Z,1520660439.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:40:40.333Z,1520660440.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:40:40.718Z,1520660440.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:40:41.113Z,1520660441.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:40:41.541Z,1520660441.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:40:41.940Z,1520660441.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:40:42.341Z,1520660442.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:40:42.717Z,1520660442.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:40:43.117Z,1520660443.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:40:43.537Z,1520660443.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:40:43.917Z,1520660443.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:40:44.341Z,1520660444.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:40:44.742Z,1520660444.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:40:45.139Z,1520660445.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:40:45.542Z,1520660445.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:40:45.938Z,1520660445.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:40:46.357Z,1520660446.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:40:46.768Z,1520660446.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:40:47.149Z,1520660447.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:40:47.546Z,1520660447.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:40:47.946Z,1520660447.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:40:48.325Z,1520660448.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:40:48.725Z,1520660448.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:40:49.148Z,1520660449.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:40:49.553Z,1520660449.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:40:49.945Z,1520660449.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:40:50.350Z,1520660450.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:40:50.718Z,1520660450.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:40:51.146Z,1520660451.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:40:51.549Z,1520660451.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:40:51.960Z,1520660451.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:40:52.356Z,1520660452.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:40:52.721Z,1520660452.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:40:53.150Z,1520660453.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:40:53.550Z,1520660453.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:40:53.952Z,1520660453.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:40:54.322Z,1520660454.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:40:54.721Z,1520660454.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:40:55.156Z,1520660455.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:40:55.547Z,1520660455.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:40:55.950Z,1520660455.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:40:56.322Z,1520660456.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:40:56.721Z,1520660456.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:40:57.150Z,1520660457.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:40:57.549Z,1520660457.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:40:57.950Z,1520660457.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:40:58.330Z,1520660458.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:40:58.755Z,1520660458.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:40:59.134Z,1520660459.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:40:59.534Z,1520660459.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:40:59.930Z,1520660459.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:41:00.326Z,1520660460.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:41:00.729Z,1520660460.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:41:01.153Z,1520660461.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:41:01.550Z,1520660461.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:41:01.930Z,1520660461.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:41:02.326Z,1520660462.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:41:02.729Z,1520660462.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:41:03.130Z,1520660463.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:41:03.559Z,1520660463.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:41:03.960Z,1520660463.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:41:04.325Z,1520660464.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:41:04.725Z,1520660464.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:41:05.130Z,1520660465.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:41:05.530Z,1520660465.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:41:05.931Z,1520660465.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:41:06.325Z,1520660466.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:41:06.725Z,1520660466.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:41:07.132Z,1520660467.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:41:07.530Z,1520660467.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:41:07.930Z,1520660467.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:41:08.327Z,1520660468.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:41:08.722Z,1520660468.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:41:09.131Z,1520660469.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:41:09.538Z,1520660469.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:41:09.933Z,1520660469.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:41:10.357Z,1520660470.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:41:13.437Z,1520660473.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:41:13.613Z,1520660473.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:41:14.021Z,1520660474.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:41:14.420Z,1520660474.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:41:14.824Z,1520660474.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:41:15.191Z,1520660475.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:41:15.591Z,1520660475.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:41:15.987Z,1520660475.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:41:16.417Z,1520660476.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:41:16.815Z,1520660476.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:41:17.221Z,1520660477.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:41:17.613Z,1520660477.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:41:17.994Z,1520660477.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:41:18.386Z,1520660478.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:41:18.797Z,1520660478.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:41:19.215Z,1520660479.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:41:19.620Z,1520660479.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:41:20.024Z,1520660480.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:41:20.390Z,1520660480.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:41:20.790Z,1520660480.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:41:21.195Z,1520660481.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:41:21.623Z,1520660481.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:41:22.001Z,1520660482.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:41:22.399Z,1520660482.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:41:22.823Z,1520660482.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:41:23.199Z,1520660483.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:41:23.597Z,1520660483.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:41:24.001Z,1520660484.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:41:24.393Z,1520660484.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:41:24.801Z,1520660484.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:41:25.200Z,1520660485.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:41:25.605Z,1520660485.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:41:26.027Z,1520660486.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:41:26.396Z,1520660486.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:41:26.794Z,1520660486.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:41:27.193Z,1520660487.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:41:27.597Z,1520660487.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:41:27.994Z,1520660487.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:41:28.399Z,1520660488.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:41:28.800Z,1520660488.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:41:29.206Z,1520660489.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:41:29.601Z,1520660489.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:41:30.000Z,1520660490.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:41:30.395Z,1520660490.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:41:30.794Z,1520660490.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:41:31.213Z,1520660491.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:41:31.606Z,1520660491.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:41:32.013Z,1520660492.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:41:32.401Z,1520660492.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:41:32.809Z,1520660492.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:41:33.194Z,1520660493.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:41:33.598Z,1520660493.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:41:34.001Z,1520660494.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:41:34.406Z,1520660494.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:41:34.806Z,1520660494.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:41:35.213Z,1520660495.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:41:35.594Z,1520660495.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:41:35.996Z,1520660495.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:41:36.410Z,1520660496.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:41:36.800Z,1520660496.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:41:37.239Z,1520660497.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:41:37.610Z,1520660497.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:41:38.013Z,1520660498.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:41:38.400Z,1520660498.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:41:38.795Z,1520660498.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:41:39.196Z,1520660499.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:41:39.599Z,1520660499.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:41:40.005Z,1520660500.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:41:40.408Z,1520660500.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:41:40.809Z,1520660500.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:41:41.211Z,1520660501.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:41:41.598Z,1520660501.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:41:42.002Z,1520660502.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:41:42.405Z,1520660502.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:41:42.797Z,1520660502.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:41:43.248Z,1520660503.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:41:43.625Z,1520660503.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:41:44.011Z,1520660504.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:41:44.399Z,1520660504.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:41:44.798Z,1520660504.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:41:45.199Z,1520660505.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:41:45.600Z,1520660505.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:41:46.013Z,1520660506.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:41:46.448Z,1520660506.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:41:46.864Z,1520660506.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:41:47.222Z,1520660507.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:41:47.625Z,1520660507.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:41:48.020Z,1520660508.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:41:48.420Z,1520660508.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:41:48.844Z,1520660508.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:41:49.223Z,1520660509.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:41:49.614Z,1520660509.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:41:50.022Z,1520660510.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:41:50.428Z,1520660510.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:41:50.796Z,1520660510.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:41:51.221Z,1520660511.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:41:51.591Z,1520660511.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:41:51.996Z,1520660511.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:41:52.419Z,1520660512.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:41:52.819Z,1520660512.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:41:53.199Z,1520660513.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:41:53.594Z,1520660513.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:41:53.996Z,1520660513.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:41:54.425Z,1520660514.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:41:54.828Z,1520660514.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:41:55.205Z,1520660515.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:41:55.609Z,1520660515.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:41:55.000Z,1520660516.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:41:56.395Z,1520660516.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:41:56.798Z,1520660516.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:41:57.194Z,1520660517.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:41:57.598Z,1520660517.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:41:57.997Z,1520660517.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:41:58.400Z,1520660518.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:41:58.800Z,1520660518.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:41:59.199Z,1520660519.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:41:59.595Z,1520660519.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:42:00.004Z,1520660520.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:42:00.433Z,1520660520.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:42:00.794Z,1520660520.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:42:01.211Z,1520660521.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:42:01.610Z,1520660521.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:42:02.006Z,1520660522.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:42:02.399Z,1520660522.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:42:02.801Z,1520660522.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:42:03.201Z,1520660523.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:42:03.600Z,1520660523.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:42:03.998Z,1520660523.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:42:04.407Z,1520660524.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:42:04.808Z,1520660524.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:42:05.207Z,1520660525.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:42:05.605Z,1520660525.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:42:06.009Z,1520660526.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:42:06.417Z,1520660526.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:42:06.796Z,1520660526.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:42:07.212Z,1520660527.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:42:07.617Z,1520660527.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:42:08.007Z,1520660528.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:42:08.402Z,1520660528.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:42:08.798Z,1520660528.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:42:09.201Z,1520660529.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:42:09.600Z,1520660529.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:42:10.002Z,1520660530.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:42:10.406Z,1520660530.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:42:13.562Z,1520660533.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:42:13.741Z,1520660533.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:42:14.100Z,1520660534.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:42:14.505Z,1520660534.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:42:14.901Z,1520660534.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:42:15.310Z,1520660535.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:42:15.711Z,1520660535.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:42:16.110Z,1520660536.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:42:16.500Z,1520660536.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:42:16.902Z,1520660536.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:42:17.302Z,1520660537.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:42:17.700Z,1520660537.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:42:18.113Z,1520660538.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:42:18.525Z,1520660538.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:42:18.910Z,1520660538.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:42:19.312Z,1520660539.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:42:19.701Z,1520660539.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:42:20.101Z,1520660540.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:42:20.503Z,1520660540.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:42:20.902Z,1520660540.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:42:21.311Z,1520660541.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:42:21.715Z,1520660541.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:42:22.110Z,1520660542.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:42:22.505Z,1520660542.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:42:22.905Z,1520660542.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:42:23.303Z,1520660543.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:42:23.705Z,1520660543.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:42:24.105Z,1520660544.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:42:24.512Z,1520660544.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:42:24.929Z,1520660544.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:42:25.312Z,1520660545.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:42:25.707Z,1520660545.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:42:26.106Z,1520660546.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:42:26.510Z,1520660546.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:42:26.895Z,1520660546.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:42:27.322Z,1520660547.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:42:27.727Z,1520660547.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:42:28.124Z,1520660548.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:42:28.494Z,1520660548.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:42:28.901Z,1520660548.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:42:29.294Z,1520660549.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:42:29.694Z,1520660549.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:42:30.099Z,1520660550.099 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:42:30.099Z,1520660550.099 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 9
2018-03-10T05:42:30.100Z,1520660550.100 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-03-10T05:42:30.101Z,1520660550.101 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:42:30.101Z,1520660550.101 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 9
2018-03-10T05:42:30.101Z,1520660550.101 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-03-10T05:42:30.103Z,1520660550.103 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:42:30.103Z,1520660550.103 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 9
2018-03-10T05:42:30.103Z,1520660550.103 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-10T05:42:30.199Z,1520660550.199 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-03-10T05:42:30.199Z,1520660550.199 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-03-10T05:42:30.199Z,1520660550.199 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-10T05:42:30.604Z,1520660550.604 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-03-10T05:42:30.604Z,1520660550.604 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 9
2018-03-10T05:42:30.604Z,1520660550.604 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-03-10T05:42:30.604Z,1520660550.604 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 9
2018-03-10T05:42:30.605Z,1520660550.605 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-10T05:42:30.605Z,1520660550.605 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 9
2018-03-10T05:42:30.968Z,1520660550.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-03-10T05:42:30.969Z,1520660550.969 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-03-10T05:42:30.969Z,1520660550.969 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-03-10T05:42:30.970Z,1520660550.970 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-03-10T05:42:30.970Z,1520660550.970 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-03-10T05:42:30.970Z,1520660550.970 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-03-10T05:42:30.971Z,1520660550.971 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-10T05:42:30.971Z,1520660550.971 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-10T05:42:30.972Z,1520660550.972 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-10T05:42:31.331Z,1520660551.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-03-10T05:42:31.332Z,1520660551.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:42:31.700Z,1520660551.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-03-10T05:42:31.700Z,1520660551.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:42:32.099Z,1520660552.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-03-10T05:42:32.100Z,1520660552.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:42:32.498Z,1520660552.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-03-10T05:42:32.499Z,1520660552.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:42:32.894Z,1520660552.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-03-10T05:42:32.895Z,1520660552.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:42:33.302Z,1520660553.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-03-10T05:42:33.303Z,1520660553.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:42:33.762Z,1520660553.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.7 s old, using for 20.0 s.
2018-03-10T05:42:33.779Z,1520660553.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:42:34.105Z,1520660554.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-03-10T05:42:34.106Z,1520660554.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:42:34.500Z,1520660554.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-03-10T05:42:34.501Z,1520660554.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:42:34.894Z,1520660554.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-03-10T05:42:34.895Z,1520660554.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:42:35.294Z,1520660555.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-03-10T05:42:35.294Z,1520660555.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:42:35.699Z,1520660555.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-03-10T05:42:35.700Z,1520660555.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:42:36.104Z,1520660556.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-03-10T05:42:36.105Z,1520660556.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:42:36.530Z,1520660556.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-03-10T05:42:36.531Z,1520660556.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:42:36.904Z,1520660556.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-03-10T05:42:36.905Z,1520660556.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:42:37.312Z,1520660557.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-03-10T05:42:37.313Z,1520660557.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:42:37.701Z,1520660557.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-03-10T05:42:37.702Z,1520660557.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:42:38.097Z,1520660558.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-03-10T05:42:38.098Z,1520660558.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:42:38.501Z,1520660558.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-03-10T05:42:38.501Z,1520660558.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:42:38.905Z,1520660558.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-03-10T05:42:38.906Z,1520660558.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:42:39.305Z,1520660559.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-03-10T05:42:39.306Z,1520660559.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:42:39.712Z,1520660559.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-03-10T05:42:39.713Z,1520660559.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:42:40.105Z,1520660560.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-03-10T05:42:40.106Z,1520660560.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:42:40.498Z,1520660560.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-03-10T05:42:40.500Z,1520660560.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:42:40.898Z,1520660560.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-03-10T05:42:40.899Z,1520660560.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:42:41.294Z,1520660561.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-03-10T05:42:41.295Z,1520660561.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:42:41.699Z,1520660561.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-03-10T05:42:41.700Z,1520660561.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:42:42.096Z,1520660562.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-03-10T05:42:42.097Z,1520660562.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:42:42.506Z,1520660562.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-03-10T05:42:42.507Z,1520660562.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:42:42.906Z,1520660562.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-03-10T05:42:42.907Z,1520660562.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:42:43.313Z,1520660563.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-03-10T05:42:43.314Z,1520660563.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:42:43.720Z,1520660563.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-03-10T05:42:43.721Z,1520660563.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:42:44.102Z,1520660564.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-03-10T05:42:44.103Z,1520660564.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:42:44.504Z,1520660564.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-03-10T05:42:44.505Z,1520660564.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:42:44.900Z,1520660564.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-03-10T05:42:44.901Z,1520660564.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:42:45.310Z,1520660565.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-03-10T05:42:45.311Z,1520660565.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:42:45.712Z,1520660565.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-03-10T05:42:45.713Z,1520660565.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:42:46.110Z,1520660566.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-03-10T05:42:46.111Z,1520660566.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:42:46.502Z,1520660566.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-03-10T05:42:46.503Z,1520660566.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:42:46.897Z,1520660566.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-03-10T05:42:46.898Z,1520660566.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:42:47.307Z,1520660567.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-03-10T05:42:47.308Z,1520660567.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:42:47.724Z,1520660567.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-03-10T05:42:47.725Z,1520660567.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:42:48.104Z,1520660568.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-03-10T05:42:48.105Z,1520660568.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:42:48.506Z,1520660568.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2018-03-10T05:42:48.507Z,1520660568.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:42:48.909Z,1520660568.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2018-03-10T05:42:48.910Z,1520660568.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:42:49.310Z,1520660569.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2018-03-10T05:42:49.311Z,1520660569.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:42:49.703Z,1520660569.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2018-03-10T05:42:49.704Z,1520660569.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:42:50.105Z,1520660570.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:42:50.499Z,1520660570.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:42:50.900Z,1520660570.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:42:51.310Z,1520660571.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:42:51.713Z,1520660571.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:42:52.110Z,1520660572.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:42:52.509Z,1520660572.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:42:52.900Z,1520660572.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:42:53.302Z,1520660573.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:42:53.698Z,1520660573.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:42:54.099Z,1520660574.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:42:54.511Z,1520660574.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:42:54.911Z,1520660574.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:42:55.317Z,1520660575.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:42:55.713Z,1520660575.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:42:56.101Z,1520660576.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:42:56.502Z,1520660576.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:42:56.905Z,1520660576.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:42:57.310Z,1520660577.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:42:57.716Z,1520660577.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:42:58.107Z,1520660578.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:42:58.504Z,1520660578.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:42:58.895Z,1520660578.895 [BPC1](ERROR): Bank B: No match for stick 2 serial number:1717 in the onboard configuration file.
2018-03-10T05:42:58.895Z,1520660578.895 [BPC1](ERROR): Failed to parse Bank B battery data
2018-03-10T05:42:58.895Z,1520660578.895 [BPC1] Data Fault, FailCount= 1
2018-03-10T05:42:58.895Z,1520660578.895 [BPC1](ERROR): Data Fault
2018-03-10T05:42:58.903Z,1520660578.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:42:58.989Z,1520660578.989 [CBIT](ERROR): Data Fault in component: BPC1
2018-03-10T05:42:59.303Z,1520660579.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:42:59.709Z,1520660579.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:43:00.108Z,1520660580.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:43:00.198Z,1520660580.198 [CBIT](INFO): Clearing failed state for component BPC1
2018-03-10T05:43:00.198Z,1520660580.198 [BPC1] No Fault, FailCount= 1
2018-03-10T05:43:00.561Z,1520660580.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:43:00.913Z,1520660580.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:43:01.310Z,1520660581.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:43:01.701Z,1520660581.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:43:02.102Z,1520660582.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:43:02.503Z,1520660582.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:43:02.904Z,1520660582.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:43:03.310Z,1520660583.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:43:03.714Z,1520660583.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:43:04.110Z,1520660584.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:43:04.505Z,1520660584.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:43:04.909Z,1520660584.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:43:05.307Z,1520660585.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:43:05.704Z,1520660585.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:43:06.113Z,1520660586.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:43:06.511Z,1520660586.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:43:06.911Z,1520660586.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:43:07.314Z,1520660587.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:43:07.709Z,1520660587.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:43:08.105Z,1520660588.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:43:08.502Z,1520660588.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:43:08.902Z,1520660588.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:43:09.311Z,1520660589.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:43:09.716Z,1520660589.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:43:10.111Z,1520660590.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:43:10.503Z,1520660590.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:43:13.610Z,1520660593.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:43:13.777Z,1520660593.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:43:14.171Z,1520660594.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:43:14.576Z,1520660594.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:43:14.971Z,1520660594.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:43:15.356Z,1520660595.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:43:15.765Z,1520660595.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:43:16.168Z,1520660596.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:43:16.571Z,1520660596.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:43:16.972Z,1520660596.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:43:17.376Z,1520660597.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:43:17.755Z,1520660597.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:43:18.168Z,1520660598.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:43:18.573Z,1520660598.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:43:18.981Z,1520660598.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:43:19.357Z,1520660599.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:43:19.763Z,1520660599.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:43:20.167Z,1520660600.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:43:20.570Z,1520660600.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:43:20.966Z,1520660600.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:43:21.362Z,1520660601.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:43:21.745Z,1520660601.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:43:22.169Z,1520660602.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:43:22.569Z,1520660602.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:43:22.978Z,1520660602.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:43:23.379Z,1520660603.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:43:23.750Z,1520660603.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:43:24.169Z,1520660604.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:43:24.569Z,1520660604.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:43:24.969Z,1520660604.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:43:25.347Z,1520660605.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:43:25.745Z,1520660605.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:43:26.170Z,1520660606.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:43:26.573Z,1520660606.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:43:26.967Z,1520660606.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:43:27.349Z,1520660607.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:43:27.746Z,1520660607.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:43:28.175Z,1520660608.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:43:28.573Z,1520660608.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:43:28.975Z,1520660608.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:43:29.346Z,1520660609.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:43:29.753Z,1520660609.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:43:30.178Z,1520660610.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:43:30.578Z,1520660610.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:43:30.992Z,1520660610.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:43:31.384Z,1520660611.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:43:31.745Z,1520660611.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:43:32.179Z,1520660612.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:43:32.584Z,1520660612.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:43:32.978Z,1520660612.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:43:33.349Z,1520660613.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:43:33.750Z,1520660613.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:43:34.175Z,1520660614.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:43:34.562Z,1520660614.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:43:34.979Z,1520660614.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:43:35.360Z,1520660615.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:43:35.789Z,1520660615.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:43:36.159Z,1520660616.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:43:36.562Z,1520660616.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:43:36.959Z,1520660616.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:43:37.357Z,1520660617.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:43:37.754Z,1520660617.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:43:38.158Z,1520660618.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:43:38.563Z,1520660618.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:43:38.958Z,1520660618.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:43:39.361Z,1520660619.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:43:39.757Z,1520660619.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:43:40.165Z,1520660620.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:43:40.558Z,1520660620.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:43:40.987Z,1520660620.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:43:41.361Z,1520660621.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:43:41.761Z,1520660621.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:43:42.163Z,1520660622.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:43:42.562Z,1520660622.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:43:42.961Z,1520660622.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:43:43.361Z,1520660623.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:43:43.773Z,1520660623.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:43:44.165Z,1520660624.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:43:44.613Z,1520660624.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:43:45.021Z,1520660625.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:43:45.362Z,1520660625.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:43:45.760Z,1520660625.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:43:46.178Z,1520660626.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:43:46.564Z,1520660626.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:43:46.965Z,1520660626.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:43:47.369Z,1520660627.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:43:47.766Z,1520660627.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:43:48.221Z,1520660628.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:43:48.584Z,1520660628.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:43:48.980Z,1520660628.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:43:49.351Z,1520660629.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:43:49.754Z,1520660629.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:43:50.159Z,1520660630.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:43:50.579Z,1520660630.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:43:50.980Z,1520660630.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:43:51.361Z,1520660631.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:43:51.754Z,1520660631.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:43:52.180Z,1520660632.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:43:52.559Z,1520660632.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:43:52.960Z,1520660632.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:43:53.354Z,1520660633.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:43:53.753Z,1520660633.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:43:54.187Z,1520660634.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:43:54.566Z,1520660634.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:43:54.959Z,1520660634.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:43:55.361Z,1520660635.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:43:55.760Z,1520660635.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:43:56.185Z,1520660636.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:43:56.559Z,1520660636.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:43:56.959Z,1520660636.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:43:57.354Z,1520660637.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:43:57.755Z,1520660637.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:43:58.160Z,1520660638.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:43:58.558Z,1520660638.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:43:58.963Z,1520660638.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:43:59.361Z,1520660639.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:43:59.760Z,1520660639.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:44:00.195Z,1520660640.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:44:00.565Z,1520660640.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:44:00.966Z,1520660640.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:44:01.356Z,1520660641.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:44:01.761Z,1520660641.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:44:02.165Z,1520660642.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:44:02.566Z,1520660642.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:44:02.965Z,1520660642.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:44:03.361Z,1520660643.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:44:03.756Z,1520660643.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:44:04.173Z,1520660644.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:44:04.565Z,1520660644.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:44:04.968Z,1520660644.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:44:05.354Z,1520660645.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:44:05.761Z,1520660645.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:44:06.167Z,1520660646.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:44:06.566Z,1520660646.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:44:06.967Z,1520660646.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:44:07.357Z,1520660647.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:44:07.764Z,1520660647.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:44:08.173Z,1520660648.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:44:08.598Z,1520660648.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:44:08.973Z,1520660648.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:44:09.355Z,1520660649.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:44:09.757Z,1520660649.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:44:10.166Z,1520660650.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:44:10.577Z,1520660650.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:44:13.673Z,1520660653.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:44:13.825Z,1520660653.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:44:14.220Z,1520660654.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:44:14.637Z,1520660654.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:44:15.085Z,1520660655.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:44:15.430Z,1520660655.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:44:15.830Z,1520660655.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:44:16.231Z,1520660656.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:44:16.625Z,1520660656.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:44:17.012Z,1520660657.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:44:17.417Z,1520660657.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:44:17.825Z,1520660657.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:44:18.223Z,1520660658.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:44:18.653Z,1520660658.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:44:19.031Z,1520660659.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:44:19.434Z,1520660659.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:44:19.831Z,1520660659.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:44:20.226Z,1520660660.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:44:20.648Z,1520660660.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:44:21.041Z,1520660661.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:44:21.438Z,1520660661.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:44:21.840Z,1520660661.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:44:22.238Z,1520660662.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:44:22.635Z,1520660662.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:44:23.014Z,1520660663.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:44:23.508Z,1520660663.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:44:23.811Z,1520660663.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:44:24.237Z,1520660664.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:44:24.635Z,1520660664.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:44:25.037Z,1520660665.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:44:25.413Z,1520660665.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:44:25.849Z,1520660665.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:44:26.241Z,1520660666.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:44:26.613Z,1520660666.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:44:27.007Z,1520660667.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:44:27.436Z,1520660667.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:44:27.840Z,1520660667.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:44:28.237Z,1520660668.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:44:28.612Z,1520660668.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:44:29.040Z,1520660669.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:44:29.411Z,1520660669.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:44:29.813Z,1520660669.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:44:30.238Z,1520660670.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:44:30.638Z,1520660670.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:44:31.038Z,1520660671.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:44:31.413Z,1520660671.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:44:31.816Z,1520660671.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:44:32.240Z,1520660672.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:44:32.618Z,1520660672.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:44:33.020Z,1520660673.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:44:33.452Z,1520660673.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:44:33.848Z,1520660673.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:44:34.245Z,1520660674.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:44:34.616Z,1520660674.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:44:35.021Z,1520660675.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:44:35.444Z,1520660675.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:44:35.821Z,1520660675.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:44:36.222Z,1520660676.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:44:36.624Z,1520660676.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:44:37.048Z,1520660677.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:44:37.443Z,1520660677.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:44:37.818Z,1520660677.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:44:38.221Z,1520660678.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:44:38.652Z,1520660678.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:44:39.034Z,1520660679.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:44:39.424Z,1520660679.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:44:39.833Z,1520660679.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:44:40.245Z,1520660680.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:44:40.644Z,1520660680.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:44:41.017Z,1520660681.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:44:41.421Z,1520660681.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:44:41.833Z,1520660681.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:44:42.225Z,1520660682.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:44:42.629Z,1520660682.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:44:43.029Z,1520660683.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:44:43.433Z,1520660683.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:44:43.818Z,1520660683.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:44:44.217Z,1520660684.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:44:44.623Z,1520660684.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:44:45.029Z,1520660685.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:44:45.431Z,1520660685.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:44:45.860Z,1520660685.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:44:46.233Z,1520660686.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:44:46.633Z,1520660686.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:44:47.019Z,1520660687.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:44:47.422Z,1520660687.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:44:47.819Z,1520660687.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:44:48.232Z,1520660688.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:44:48.633Z,1520660688.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:44:49.031Z,1520660689.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:44:49.418Z,1520660689.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:44:49.829Z,1520660689.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:44:50.220Z,1520660690.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:44:50.627Z,1520660690.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:44:51.027Z,1520660691.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:44:51.460Z,1520660691.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:44:51.834Z,1520660691.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:44:52.231Z,1520660692.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:44:52.619Z,1520660692.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:44:53.033Z,1520660693.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:44:53.423Z,1520660693.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:44:53.820Z,1520660693.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:44:54.228Z,1520660694.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:44:54.633Z,1520660694.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:44:55.031Z,1520660695.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:44:55.421Z,1520660695.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:44:55.828Z,1520660695.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:44:56.233Z,1520660696.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:44:56.622Z,1520660696.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:44:57.021Z,1520660697.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:44:57.434Z,1520660697.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:44:57.842Z,1520660697.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:44:58.234Z,1520660698.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:44:58.641Z,1520660698.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:44:59.029Z,1520660699.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:44:59.440Z,1520660699.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:44:59.820Z,1520660699.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:45:00.240Z,1520660700.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:45:00.629Z,1520660700.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:45:01.031Z,1520660701.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:45:01.425Z,1520660701.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:45:01.821Z,1520660701.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:45:02.223Z,1520660702.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:45:02.628Z,1520660702.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:45:03.020Z,1520660703.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:45:03.430Z,1520660703.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:45:03.838Z,1520660703.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:45:04.253Z,1520660704.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:45:04.632Z,1520660704.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:45:05.031Z,1520660705.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:45:05.408Z,1520660705.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:45:05.840Z,1520660705.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:45:06.235Z,1520660706.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:45:06.632Z,1520660706.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:45:07.032Z,1520660707.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:45:07.440Z,1520660707.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:45:07.835Z,1520660707.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:45:08.214Z,1520660708.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:45:08.636Z,1520660708.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:45:09.041Z,1520660709.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:45:09.437Z,1520660709.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:45:09.844Z,1520660709.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:45:10.238Z,1520660710.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:45:10.640Z,1520660710.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:45:13.744Z,1520660713.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:45:13.747Z,1520660713.747 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-03-10T05:40:13.4Z
2018-03-10T05:45:13.747Z,1520660713.747 [Default:CheckIn:Read_GPS] Stopped
2018-03-10T05:45:13.747Z,1520660713.747 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-03-10T05:45:13.901Z,1520660713.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:45:14.377Z,1520660714.377 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20180310T051512/Courier0012.lzma
2018-03-10T05:45:14.429Z,1520660714.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:45:14.706Z,1520660714.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:45:15.045Z,1520660715.045 [DataOverHttps](INFO): Moved sent file to Logs/20180310T051512/Courier0012.lzma.bak
2018-03-10T05:45:15.045Z,1520660715.045 [DataOverHttps](INFO): SBD MOMSN=8001995
2018-03-10T05:45:15.111Z,1520660715.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:45:15.813Z,1520660715.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:45:15.957Z,1520660715.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:45:16.361Z,1520660716.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:45:19.463Z,1520660719.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:45:19.633Z,1520660719.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:45:20.026Z,1520660720.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:45:20.425Z,1520660720.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:45:20.815Z,1520660720.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:45:21.213Z,1520660721.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:45:21.609Z,1520660721.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:45:24.718Z,1520660724.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:45:24.799Z,1520660724.799 [CBIT](DEBUG): EFC running - data check-sum false
2018-03-10T05:45:24.896Z,1520660724.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:45:25.219Z,1520660725.219 [DataOverHttps](INFO): Sending 169 bytes from file Logs/20180310T051512/Express0013.lzma
2018-03-10T05:45:25.279Z,1520660725.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:45:25.667Z,1520660725.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:45:26.017Z,1520660726.017 [DataOverHttps](INFO): Moved sent file to Logs/20180310T051512/Express0013.lzma.bak
2018-03-10T05:45:26.017Z,1520660726.017 [DataOverHttps](INFO): SBD MOMSN=8002000
2018-03-10T05:45:26.078Z,1520660726.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:45:26.760Z,1520660726.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:45:26.763Z,1520660726.763 [Default:CheckIn:Read_Iridium] Stopped
2018-03-10T05:45:26.763Z,1520660726.763 [Default:CheckIn:C.Wait] Running Loop=1
2018-03-10T05:45:26.763Z,1520660726.763 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-03-10T05:45:26.915Z,1520660726.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:45:27.310Z,1520660727.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:45:30.426Z,1520660730.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:45:30.613Z,1520660730.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:45:31.007Z,1520660731.007 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:45:31.007Z,1520660731.007 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 10
2018-03-10T05:45:31.007Z,1520660731.007 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-03-10T05:45:31.009Z,1520660731.009 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:45:31.009Z,1520660731.009 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 10
2018-03-10T05:45:31.009Z,1520660731.009 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-03-10T05:45:31.011Z,1520660731.011 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:45:31.011Z,1520660731.011 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 10
2018-03-10T05:45:31.011Z,1520660731.011 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-10T05:45:31.091Z,1520660731.091 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-03-10T05:45:31.091Z,1520660731.091 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-03-10T05:45:31.092Z,1520660731.092 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-10T05:45:31.490Z,1520660731.490 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-03-10T05:45:31.490Z,1520660731.490 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 10
2018-03-10T05:45:31.492Z,1520660731.492 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-03-10T05:45:31.492Z,1520660731.492 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 10
2018-03-10T05:45:31.492Z,1520660731.492 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-10T05:45:31.492Z,1520660731.492 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 10
2018-03-10T05:45:31.815Z,1520660731.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-03-10T05:45:31.815Z,1520660731.815 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-03-10T05:45:31.816Z,1520660731.816 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-03-10T05:45:31.816Z,1520660731.816 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-03-10T05:45:31.816Z,1520660731.816 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-03-10T05:45:31.817Z,1520660731.817 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-03-10T05:45:31.817Z,1520660731.817 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-10T05:45:31.818Z,1520660731.818 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-10T05:45:31.818Z,1520660731.818 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-10T05:45:32.215Z,1520660732.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-03-10T05:45:32.216Z,1520660732.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:45:32.610Z,1520660732.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-03-10T05:45:32.611Z,1520660732.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:45:33.020Z,1520660733.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-03-10T05:45:33.021Z,1520660733.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:45:33.381Z,1520660733.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-03-10T05:45:33.382Z,1520660733.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:45:33.782Z,1520660733.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-03-10T05:45:33.783Z,1520660733.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:45:34.190Z,1520660734.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-03-10T05:45:34.191Z,1520660734.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:45:34.586Z,1520660734.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-03-10T05:45:34.586Z,1520660734.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:45:34.995Z,1520660734.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-03-10T05:45:34.996Z,1520660734.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:45:35.400Z,1520660735.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-03-10T05:45:35.400Z,1520660735.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:45:35.796Z,1520660735.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-03-10T05:45:35.796Z,1520660735.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:45:36.191Z,1520660736.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-03-10T05:45:36.192Z,1520660736.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:45:36.586Z,1520660736.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-03-10T05:45:36.587Z,1520660736.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:45:36.985Z,1520660736.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-03-10T05:45:36.986Z,1520660736.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:45:37.392Z,1520660737.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-03-10T05:45:37.393Z,1520660737.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:45:37.792Z,1520660737.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-03-10T05:45:37.793Z,1520660737.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:45:38.202Z,1520660738.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-03-10T05:45:38.204Z,1520660738.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:45:38.600Z,1520660738.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-03-10T05:45:38.601Z,1520660738.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:45:39.004Z,1520660739.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-03-10T05:45:39.005Z,1520660739.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:45:39.424Z,1520660739.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-03-10T05:45:39.425Z,1520660739.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:45:39.787Z,1520660739.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-03-10T05:45:39.788Z,1520660739.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:45:40.196Z,1520660740.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-03-10T05:45:40.198Z,1520660740.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:45:40.593Z,1520660740.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-03-10T05:45:40.594Z,1520660740.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:45:40.990Z,1520660740.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-03-10T05:45:40.991Z,1520660740.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:45:41.409Z,1520660741.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-03-10T05:45:41.410Z,1520660741.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:45:41.802Z,1520660741.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-03-10T05:45:41.802Z,1520660741.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:45:42.202Z,1520660742.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-03-10T05:45:42.203Z,1520660742.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:45:42.608Z,1520660742.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-03-10T05:45:42.610Z,1520660742.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:45:42.992Z,1520660742.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-03-10T05:45:42.993Z,1520660742.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:45:43.389Z,1520660743.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-03-10T05:45:43.391Z,1520660743.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:45:43.793Z,1520660743.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-03-10T05:45:43.794Z,1520660743.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:45:44.203Z,1520660744.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-03-10T05:45:44.204Z,1520660744.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:45:44.641Z,1520660744.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-03-10T05:45:44.642Z,1520660744.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:45:45.042Z,1520660745.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-03-10T05:45:45.043Z,1520660745.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:45:45.398Z,1520660745.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-03-10T05:45:45.399Z,1520660745.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:45:45.804Z,1520660745.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-03-10T05:45:45.805Z,1520660745.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:45:46.194Z,1520660746.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-03-10T05:45:46.200Z,1520660746.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:45:46.606Z,1520660746.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-03-10T05:45:46.611Z,1520660746.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:45:47.007Z,1520660747.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-03-10T05:45:47.008Z,1520660747.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:45:47.412Z,1520660747.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-03-10T05:45:47.413Z,1520660747.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:45:47.816Z,1520660747.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-03-10T05:45:47.817Z,1520660747.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:45:48.213Z,1520660748.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-03-10T05:45:48.214Z,1520660748.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:45:48.619Z,1520660748.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-03-10T05:45:48.620Z,1520660748.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:45:49.029Z,1520660749.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-03-10T05:45:49.030Z,1520660749.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:45:49.392Z,1520660749.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2018-03-10T05:45:49.393Z,1520660749.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:45:49.787Z,1520660749.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2018-03-10T05:45:49.788Z,1520660749.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:45:50.195Z,1520660750.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2018-03-10T05:45:50.196Z,1520660750.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:45:50.591Z,1520660750.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2018-03-10T05:45:50.592Z,1520660750.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:45:50.989Z,1520660750.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 20.0 s old, using for 20.0 s.
2018-03-10T05:45:50.990Z,1520660750.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:45:51.386Z,1520660751.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:45:51.798Z,1520660751.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:45:52.221Z,1520660752.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:45:52.589Z,1520660752.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:45:52.987Z,1520660752.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:45:53.398Z,1520660753.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:45:53.822Z,1520660753.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:45:54.195Z,1520660754.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:45:54.596Z,1520660754.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:45:54.992Z,1520660754.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:45:55.393Z,1520660755.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:45:55.793Z,1520660755.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:45:56.206Z,1520660756.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:45:56.632Z,1520660756.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:45:57.026Z,1520660757.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:45:57.385Z,1520660757.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:45:57.799Z,1520660757.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:45:58.193Z,1520660758.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:45:58.588Z,1520660758.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:45:58.990Z,1520660758.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:45:59.403Z,1520660759.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:45:59.801Z,1520660759.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:46:00.226Z,1520660760.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:46:00.590Z,1520660760.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:46:00.987Z,1520660760.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:46:01.394Z,1520660761.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:46:01.788Z,1520660761.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:46:02.198Z,1520660762.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:46:02.604Z,1520660762.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:46:03.003Z,1520660763.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:46:03.405Z,1520660763.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:46:03.799Z,1520660763.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:46:04.209Z,1520660764.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:46:04.594Z,1520660764.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:46:05.036Z,1520660765.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:46:05.396Z,1520660765.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:46:05.809Z,1520660765.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:46:06.205Z,1520660766.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:46:06.609Z,1520660766.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:46:06.992Z,1520660766.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:46:07.394Z,1520660767.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:46:07.800Z,1520660767.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:46:08.200Z,1520660768.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:46:08.642Z,1520660768.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:46:09.013Z,1520660769.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:46:09.400Z,1520660769.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:46:09.793Z,1520660769.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:46:10.185Z,1520660770.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:46:10.598Z,1520660770.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:46:10.994Z,1520660770.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:46:11.420Z,1520660771.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:46:11.791Z,1520660771.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:46:12.194Z,1520660772.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:46:12.590Z,1520660772.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:46:12.992Z,1520660772.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:46:13.387Z,1520660773.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:46:13.786Z,1520660773.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:46:14.195Z,1520660774.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:46:14.615Z,1520660774.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:46:14.991Z,1520660774.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:46:15.385Z,1520660775.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:46:15.791Z,1520660775.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:46:16.193Z,1520660776.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:46:16.624Z,1520660776.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:46:16.987Z,1520660776.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:46:17.398Z,1520660777.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:46:17.822Z,1520660777.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:46:18.196Z,1520660778.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:46:18.596Z,1520660778.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:46:18.993Z,1520660778.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:46:19.390Z,1520660779.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:46:19.788Z,1520660779.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:46:20.203Z,1520660780.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:46:20.599Z,1520660780.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:46:21.032Z,1520660781.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:46:21.410Z,1520660781.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:46:21.797Z,1520660781.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:46:22.193Z,1520660782.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:46:22.586Z,1520660782.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:46:22.988Z,1520660782.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:46:23.400Z,1520660783.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:46:23.802Z,1520660783.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:46:24.228Z,1520660784.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:46:24.589Z,1520660784.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:46:24.990Z,1520660784.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:46:25.394Z,1520660785.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:46:25.793Z,1520660785.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:46:26.199Z,1520660786.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:46:26.605Z,1520660786.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:46:27.009Z,1520660787.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:46:27.405Z,1520660787.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:46:30.514Z,1520660790.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:46:30.701Z,1520660790.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:46:31.099Z,1520660791.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:46:31.504Z,1520660791.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:46:31.899Z,1520660791.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:46:32.297Z,1520660792.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:46:32.695Z,1520660792.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:46:33.099Z,1520660793.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:46:33.507Z,1520660793.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:46:33.921Z,1520660793.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:46:34.309Z,1520660794.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:46:34.696Z,1520660794.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:46:35.098Z,1520660795.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:46:35.501Z,1520660795.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:46:35.885Z,1520660795.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:46:36.308Z,1520660796.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:46:36.703Z,1520660796.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:46:37.106Z,1520660797.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:46:37.485Z,1520660797.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:46:37.889Z,1520660797.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:46:38.289Z,1520660798.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:46:38.682Z,1520660798.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:46:39.077Z,1520660799.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:46:39.511Z,1520660799.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:46:39.911Z,1520660799.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:46:40.311Z,1520660800.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:46:40.681Z,1520660800.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:46:41.089Z,1520660801.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:46:41.486Z,1520660801.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:46:41.886Z,1520660801.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:46:42.291Z,1520660802.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:46:42.712Z,1520660802.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:46:43.113Z,1520660803.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:46:43.512Z,1520660803.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:46:43.887Z,1520660803.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:46:44.286Z,1520660804.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:46:44.687Z,1520660804.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:46:45.085Z,1520660805.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:46:45.491Z,1520660805.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:46:45.887Z,1520660805.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:46:46.297Z,1520660806.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:46:46.697Z,1520660806.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:46:47.092Z,1520660807.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:46:47.474Z,1520660807.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:46:47.898Z,1520660807.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:46:48.309Z,1520660808.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:46:48.704Z,1520660808.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:46:49.105Z,1520660809.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:46:49.495Z,1520660809.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:46:49.901Z,1520660809.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:46:50.279Z,1520660810.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:46:50.705Z,1520660810.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:46:51.077Z,1520660811.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:46:51.510Z,1520660811.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:46:51.908Z,1520660811.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:46:52.310Z,1520660812.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:46:52.682Z,1520660812.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:46:53.082Z,1520660813.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:46:53.487Z,1520660813.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:46:53.882Z,1520660813.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:46:54.312Z,1520660814.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:46:54.710Z,1520660814.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:46:55.110Z,1520660815.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:46:55.482Z,1520660815.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:46:55.908Z,1520660815.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:46:56.314Z,1520660816.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:46:56.681Z,1520660816.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:46:57.082Z,1520660817.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:46:57.519Z,1520660817.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:46:57.922Z,1520660817.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:46:58.311Z,1520660818.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:46:58.685Z,1520660818.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:46:59.087Z,1520660819.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:46:59.509Z,1520660819.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:46:59.885Z,1520660819.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:47:00.291Z,1520660820.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:47:00.687Z,1520660820.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:47:01.090Z,1520660821.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:47:01.485Z,1520660821.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:47:01.885Z,1520660821.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:47:02.285Z,1520660822.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:47:02.686Z,1520660822.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:47:03.086Z,1520660823.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:47:03.491Z,1520660823.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:47:03.916Z,1520660823.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:47:04.287Z,1520660824.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:47:04.685Z,1520660824.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:47:05.085Z,1520660825.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:47:05.488Z,1520660825.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:47:05.885Z,1520660825.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:47:06.286Z,1520660826.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:47:06.715Z,1520660826.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:47:07.119Z,1520660827.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:47:07.485Z,1520660827.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:47:07.886Z,1520660827.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:47:08.286Z,1520660828.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:47:08.686Z,1520660828.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:47:09.093Z,1520660829.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:47:09.491Z,1520660829.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:47:09.911Z,1520660829.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:47:10.315Z,1520660830.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:47:10.685Z,1520660830.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:47:11.085Z,1520660831.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:47:11.493Z,1520660831.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:47:11.919Z,1520660831.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:47:12.296Z,1520660832.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:47:12.690Z,1520660832.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:47:13.091Z,1520660833.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:47:13.489Z,1520660833.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:47:13.887Z,1520660833.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:47:14.286Z,1520660834.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:47:14.688Z,1520660834.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:47:15.086Z,1520660835.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:47:15.491Z,1520660835.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:47:15.894Z,1520660835.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:47:16.293Z,1520660836.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:47:16.687Z,1520660836.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:47:17.086Z,1520660837.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:47:17.486Z,1520660837.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:47:17.885Z,1520660837.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:47:18.296Z,1520660838.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:47:18.690Z,1520660838.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:47:19.091Z,1520660839.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:47:19.489Z,1520660839.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:47:19.886Z,1520660839.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:47:20.286Z,1520660840.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:47:20.687Z,1520660840.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:47:21.093Z,1520660841.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:47:21.492Z,1520660841.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:47:21.891Z,1520660841.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:47:22.291Z,1520660842.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:47:22.694Z,1520660842.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:47:23.096Z,1520660843.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:47:23.496Z,1520660843.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:47:23.920Z,1520660843.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:47:24.320Z,1520660844.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:47:24.705Z,1520660844.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:47:25.101Z,1520660845.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:47:25.477Z,1520660845.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:47:25.877Z,1520660845.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:47:26.274Z,1520660846.274 [BPC1](ERROR): Failed to receive battery data
2018-03-10T05:47:26.274Z,1520660846.274 [BPC1] Communications Fault, FailCount= 1
2018-03-10T05:47:26.275Z,1520660846.275 [BPC1](ERROR): Communications Fault
2018-03-10T05:47:26.309Z,1520660846.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:47:26.388Z,1520660846.388 [CBIT](ERROR): Communications Fault in component: BPC1
2018-03-10T05:47:26.700Z,1520660846.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:47:27.099Z,1520660847.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:47:27.505Z,1520660847.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:47:27.585Z,1520660847.585 [CBIT](INFO): Clearing failed state for component BPC1
2018-03-10T05:47:27.585Z,1520660847.585 [BPC1] No Fault, FailCount= 1
2018-03-10T05:47:30.690Z,1520660850.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:47:30.861Z,1520660850.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:47:31.245Z,1520660851.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:47:31.628Z,1520660851.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:47:32.026Z,1520660852.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:47:32.450Z,1520660852.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:47:32.850Z,1520660852.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:47:33.250Z,1520660853.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:47:33.623Z,1520660853.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:47:34.028Z,1520660854.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:47:34.423Z,1520660854.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:47:34.821Z,1520660854.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:47:35.250Z,1520660855.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:47:35.634Z,1520660855.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:47:36.034Z,1520660856.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:47:36.421Z,1520660856.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:47:36.821Z,1520660856.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:47:37.221Z,1520660857.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:47:37.623Z,1520660857.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:47:38.021Z,1520660858.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:47:38.434Z,1520660858.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:47:38.834Z,1520660858.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:47:39.234Z,1520660859.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:47:39.629Z,1520660859.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:47:40.022Z,1520660860.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:47:40.423Z,1520660860.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:47:40.822Z,1520660860.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:47:41.234Z,1520660861.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:47:41.634Z,1520660861.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:47:42.034Z,1520660862.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:47:42.424Z,1520660862.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:47:42.822Z,1520660862.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:47:43.222Z,1520660863.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:47:43.628Z,1520660863.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:47:44.022Z,1520660864.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:47:44.453Z,1520660864.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:47:44.853Z,1520660864.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:47:45.262Z,1520660865.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:47:45.627Z,1520660865.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:47:46.071Z,1520660866.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:47:46.445Z,1520660866.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:47:46.834Z,1520660866.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:47:47.268Z,1520660867.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:47:47.639Z,1520660867.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:47:48.034Z,1520660868.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:47:48.473Z,1520660868.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:47:48.837Z,1520660868.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:47:49.229Z,1520660869.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:47:49.629Z,1520660869.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:47:50.033Z,1520660870.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:47:50.441Z,1520660870.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:47:50.841Z,1520660870.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:47:51.239Z,1520660871.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:47:51.628Z,1520660871.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:47:52.029Z,1520660872.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:47:52.427Z,1520660872.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:47:52.828Z,1520660872.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:47:53.239Z,1520660873.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:47:53.638Z,1520660873.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:47:54.039Z,1520660874.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:47:54.428Z,1520660874.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:47:54.828Z,1520660874.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:47:55.227Z,1520660875.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:47:55.629Z,1520660875.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:47:56.026Z,1520660876.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:47:56.438Z,1520660876.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:47:56.843Z,1520660876.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:47:57.245Z,1520660877.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:47:57.628Z,1520660877.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:47:58.028Z,1520660878.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:47:58.427Z,1520660878.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:47:58.828Z,1520660878.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:47:59.245Z,1520660879.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:47:59.639Z,1520660879.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:48:00.041Z,1520660880.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:48:00.428Z,1520660880.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:48:00.821Z,1520660880.821 [BPC1](FAULT): Failed to initialize
2018-03-10T05:48:00.821Z,1520660880.821 [BPC1] Communications Fault, FailCount= 2
2018-03-10T05:48:00.821Z,1520660880.821 [BPC1](ERROR): Communications Fault
2018-03-10T05:48:00.829Z,1520660880.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:48:00.915Z,1520660880.915 [CBIT](ERROR): Communications Fault in component: BPC1
2018-03-10T05:48:01.241Z,1520660881.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:48:01.620Z,1520660881.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:48:02.013Z,1520660882.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:48:02.087Z,1520660882.087 [CBIT](INFO): Clearing failed state for component BPC1
2018-03-10T05:48:02.087Z,1520660882.087 [BPC1] No Fault, FailCount= 2
2018-03-10T05:48:02.484Z,1520660882.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:48:02.826Z,1520660882.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:48:03.230Z,1520660883.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:48:03.657Z,1520660883.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:48:04.021Z,1520660884.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:48:04.415Z,1520660884.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:48:04.837Z,1520660884.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:48:05.231Z,1520660885.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:48:05.671Z,1520660885.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:48:06.042Z,1520660886.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:48:06.426Z,1520660886.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:48:06.822Z,1520660886.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:48:07.233Z,1520660887.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:48:07.630Z,1520660887.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:48:08.033Z,1520660888.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:48:08.441Z,1520660888.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:48:08.836Z,1520660888.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:48:09.235Z,1520660889.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:48:09.626Z,1520660889.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:48:10.027Z,1520660890.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:48:10.427Z,1520660890.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:48:10.827Z,1520660890.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:48:11.236Z,1520660891.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:48:11.633Z,1520660891.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:48:12.033Z,1520660892.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:48:12.428Z,1520660892.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:48:12.824Z,1520660892.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:48:13.228Z,1520660893.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:48:13.629Z,1520660893.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:48:14.026Z,1520660894.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:48:14.433Z,1520660894.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:48:14.842Z,1520660894.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:48:15.241Z,1520660895.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:48:15.626Z,1520660895.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:48:16.028Z,1520660896.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:48:16.426Z,1520660896.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:48:16.828Z,1520660896.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:48:17.245Z,1520660897.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:48:17.637Z,1520660897.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:48:18.038Z,1520660898.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:48:18.429Z,1520660898.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:48:18.826Z,1520660898.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:48:19.226Z,1520660899.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:48:19.629Z,1520660899.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:48:20.029Z,1520660900.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:48:20.438Z,1520660900.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:48:20.839Z,1520660900.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:48:21.236Z,1520660901.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:48:21.626Z,1520660901.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:48:22.026Z,1520660902.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:48:22.433Z,1520660902.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:48:22.829Z,1520660902.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:48:23.187Z,1520660903.187 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-03-10T05:48:23.187Z,1520660903.187 [NAL9602] Data Fault, FailCount= 4
2018-03-10T05:48:23.187Z,1520660903.187 [NAL9602](ERROR): Data Fault
2018-03-10T05:48:23.267Z,1520660903.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:48:23.356Z,1520660903.356 [CBIT](ERROR): Data Fault in component: NAL9602
2018-03-10T05:48:23.585Z,1520660903.585 [NAL9602](INFO): Powering down
2018-03-10T05:48:23.634Z,1520660903.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:48:24.028Z,1520660904.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:48:24.432Z,1520660904.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:48:24.508Z,1520660904.508 [CBIT](INFO): Clearing failed state for component NAL9602
2018-03-10T05:48:24.508Z,1520660904.508 [NAL9602] No Fault, FailCount= 4
2018-03-10T05:48:24.827Z,1520660904.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:48:25.233Z,1520660905.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:48:25.630Z,1520660905.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:48:26.027Z,1520660906.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:48:26.429Z,1520660906.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:48:26.830Z,1520660906.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:48:27.218Z,1520660907.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:48:27.630Z,1520660907.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:48:30.892Z,1520660910.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:48:31.039Z,1520660911.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:48:31.433Z,1520660911.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:48:31.832Z,1520660911.832 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:48:31.832Z,1520660911.832 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 11
2018-03-10T05:48:31.832Z,1520660911.832 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-03-10T05:48:31.834Z,1520660911.834 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:48:31.834Z,1520660911.834 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 11
2018-03-10T05:48:31.834Z,1520660911.834 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-03-10T05:48:31.836Z,1520660911.836 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:48:31.836Z,1520660911.836 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 11
2018-03-10T05:48:31.836Z,1520660911.836 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-10T05:48:31.935Z,1520660911.935 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-03-10T05:48:31.935Z,1520660911.935 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-03-10T05:48:31.935Z,1520660911.935 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-10T05:48:32.319Z,1520660912.319 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-03-10T05:48:32.319Z,1520660912.319 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 11
2018-03-10T05:48:32.319Z,1520660912.319 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-03-10T05:48:32.319Z,1520660912.319 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 11
2018-03-10T05:48:32.320Z,1520660912.320 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-10T05:48:32.320Z,1520660912.320 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 11
2018-03-10T05:48:32.614Z,1520660912.614 [BPC1](FAULT): Failed to initialize
2018-03-10T05:48:32.614Z,1520660912.614 [BPC1] Communications Fault, FailCount= 3
2018-03-10T05:48:32.614Z,1520660912.614 [BPC1](ERROR): Communications Fault
2018-03-10T05:48:32.644Z,1520660912.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-03-10T05:48:32.645Z,1520660912.645 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-03-10T05:48:32.645Z,1520660912.645 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-03-10T05:48:32.645Z,1520660912.645 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-03-10T05:48:32.646Z,1520660912.646 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-03-10T05:48:32.646Z,1520660912.646 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-03-10T05:48:32.646Z,1520660912.646 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-10T05:48:32.651Z,1520660912.651 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-10T05:48:32.651Z,1520660912.651 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-10T05:48:32.731Z,1520660912.731 [CBIT](ERROR): Communications Fault in component: BPC1
2018-03-10T05:48:33.040Z,1520660913.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-03-10T05:48:33.041Z,1520660913.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:48:33.415Z,1520660913.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-03-10T05:48:33.416Z,1520660913.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:48:33.840Z,1520660913.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-03-10T05:48:33.841Z,1520660913.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:48:33.927Z,1520660913.927 [CBIT](INFO): Clearing failed state for component BPC1
2018-03-10T05:48:33.927Z,1520660913.927 [BPC1] No Fault, FailCount= 3
2018-03-10T05:48:34.279Z,1520660914.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-03-10T05:48:34.280Z,1520660914.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:48:34.627Z,1520660914.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-03-10T05:48:34.628Z,1520660914.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:48:35.042Z,1520660915.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-03-10T05:48:35.043Z,1520660915.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:48:35.440Z,1520660915.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-03-10T05:48:35.441Z,1520660915.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:48:35.814Z,1520660915.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-03-10T05:48:35.815Z,1520660915.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:48:36.219Z,1520660916.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-03-10T05:48:36.220Z,1520660916.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:48:36.621Z,1520660916.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-03-10T05:48:36.622Z,1520660916.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:48:37.040Z,1520660917.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-03-10T05:48:37.041Z,1520660917.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:48:37.422Z,1520660917.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-03-10T05:48:37.439Z,1520660917.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:48:37.819Z,1520660917.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-03-10T05:48:37.820Z,1520660917.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:48:38.218Z,1520660918.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-03-10T05:48:38.219Z,1520660918.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:48:38.648Z,1520660918.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-03-10T05:48:38.649Z,1520660918.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:48:39.042Z,1520660919.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-03-10T05:48:39.043Z,1520660919.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:48:39.416Z,1520660919.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-03-10T05:48:39.417Z,1520660919.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:48:39.820Z,1520660919.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-03-10T05:48:39.821Z,1520660919.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:48:40.244Z,1520660920.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-03-10T05:48:40.245Z,1520660920.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:48:40.641Z,1520660920.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-03-10T05:48:40.642Z,1520660920.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:48:41.030Z,1520660921.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-03-10T05:48:41.035Z,1520660921.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:48:41.427Z,1520660921.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-03-10T05:48:41.428Z,1520660921.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:48:41.832Z,1520660921.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-03-10T05:48:41.833Z,1520660921.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:48:42.233Z,1520660922.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-03-10T05:48:42.233Z,1520660922.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:48:42.640Z,1520660922.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-03-10T05:48:42.641Z,1520660922.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:48:43.022Z,1520660923.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-03-10T05:48:43.023Z,1520660923.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:48:43.430Z,1520660923.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-03-10T05:48:43.432Z,1520660923.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:48:43.828Z,1520660923.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-03-10T05:48:43.829Z,1520660923.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:48:44.225Z,1520660924.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-03-10T05:48:44.226Z,1520660924.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:48:44.628Z,1520660924.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-03-10T05:48:44.629Z,1520660924.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:48:45.031Z,1520660925.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-03-10T05:48:45.032Z,1520660925.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:48:45.422Z,1520660925.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-03-10T05:48:45.423Z,1520660925.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:48:45.831Z,1520660925.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-03-10T05:48:45.832Z,1520660925.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:48:46.228Z,1520660926.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-03-10T05:48:46.228Z,1520660926.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:48:46.640Z,1520660926.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-03-10T05:48:46.641Z,1520660926.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:48:47.052Z,1520660927.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-03-10T05:48:47.053Z,1520660927.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:48:47.429Z,1520660927.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-03-10T05:48:47.430Z,1520660927.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:48:47.829Z,1520660927.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-03-10T05:48:47.863Z,1520660927.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:48:48.230Z,1520660928.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-03-10T05:48:48.230Z,1520660928.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:48:48.628Z,1520660928.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-03-10T05:48:48.629Z,1520660928.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:48:49.025Z,1520660929.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-03-10T05:48:49.025Z,1520660929.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:48:49.427Z,1520660929.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-03-10T05:48:49.428Z,1520660929.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:48:49.832Z,1520660929.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-03-10T05:48:49.833Z,1520660929.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:48:50.221Z,1520660930.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2018-03-10T05:48:50.222Z,1520660930.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:48:50.630Z,1520660930.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2018-03-10T05:48:50.631Z,1520660930.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:48:51.027Z,1520660931.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2018-03-10T05:48:51.028Z,1520660931.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:48:51.436Z,1520660931.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2018-03-10T05:48:51.437Z,1520660931.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:48:51.852Z,1520660931.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:48:52.228Z,1520660932.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:48:52.628Z,1520660932.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:48:53.030Z,1520660933.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:48:53.428Z,1520660933.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:48:53.788Z,1520660933.788 [NAL9602](INFO): Powering up NAL9602
2018-03-10T05:48:53.861Z,1520660933.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:48:54.228Z,1520660934.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:48:54.632Z,1520660934.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:48:55.022Z,1520660935.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:48:55.430Z,1520660935.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:48:55.828Z,1520660935.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:48:56.237Z,1520660936.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:48:56.652Z,1520660936.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:48:57.036Z,1520660937.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:48:57.420Z,1520660937.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:48:57.830Z,1520660937.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:48:58.227Z,1520660938.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:48:58.632Z,1520660938.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:48:59.028Z,1520660939.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:48:59.431Z,1520660939.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:48:59.830Z,1520660939.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:49:00.230Z,1520660940.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:49:00.628Z,1520660940.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:49:01.037Z,1520660941.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:49:01.429Z,1520660941.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:49:01.830Z,1520660941.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:49:02.222Z,1520660942.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:49:02.630Z,1520660942.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:49:03.029Z,1520660943.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:49:03.426Z,1520660943.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:49:03.830Z,1520660943.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:49:04.241Z,1520660944.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:49:04.588Z,1520660944.588 [NAL9602](INFO): NAL9602 initialized
2018-03-10T05:49:04.630Z,1520660944.630 [BPC1](FAULT): Failed to initialize
2018-03-10T05:49:04.630Z,1520660944.630 [BPC1] Communications Fault, FailCount= 4
2018-03-10T05:49:04.630Z,1520660944.630 [BPC1](ERROR): Communications Fault
2018-03-10T05:49:04.638Z,1520660944.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:49:04.723Z,1520660944.723 [CBIT](ERROR): Communications Fault in component: BPC1
2018-03-10T05:49:05.030Z,1520660945.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:49:05.435Z,1520660945.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:49:05.837Z,1520660945.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:49:05.915Z,1520660945.915 [CBIT](INFO): Clearing failed state for component BPC1
2018-03-10T05:49:05.915Z,1520660945.915 [BPC1] No Fault, FailCount= 4
2018-03-10T05:49:06.297Z,1520660946.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:49:06.630Z,1520660946.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:49:07.025Z,1520660947.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:49:07.449Z,1520660947.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:49:07.845Z,1520660947.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:49:08.237Z,1520660948.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:49:08.631Z,1520660948.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:49:09.032Z,1520660949.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:49:09.439Z,1520660949.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:49:09.838Z,1520660949.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:49:10.238Z,1520660950.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:49:10.632Z,1520660950.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:49:11.033Z,1520660951.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:49:11.445Z,1520660951.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:49:11.837Z,1520660951.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:49:12.245Z,1520660952.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:49:12.634Z,1520660952.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:49:13.032Z,1520660953.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:49:13.443Z,1520660953.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:49:13.847Z,1520660953.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:49:14.242Z,1520660954.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:49:14.640Z,1520660954.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:49:15.032Z,1520660955.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:49:15.440Z,1520660955.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:49:15.843Z,1520660955.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:49:16.245Z,1520660956.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:49:16.630Z,1520660956.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:49:17.045Z,1520660957.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:49:17.472Z,1520660957.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:49:17.842Z,1520660957.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:49:18.244Z,1520660958.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:49:18.645Z,1520660958.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:49:19.056Z,1520660959.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:49:19.444Z,1520660959.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:49:19.841Z,1520660959.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:49:20.239Z,1520660960.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:49:20.637Z,1520660960.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:49:21.028Z,1520660961.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:49:21.441Z,1520660961.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:49:21.846Z,1520660961.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:49:22.239Z,1520660962.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:49:22.634Z,1520660962.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:49:23.033Z,1520660963.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:49:23.445Z,1520660963.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:49:23.843Z,1520660963.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:49:24.253Z,1520660964.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:49:24.674Z,1520660964.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:49:25.033Z,1520660965.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:49:25.444Z,1520660965.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:49:25.844Z,1520660965.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:49:26.242Z,1520660966.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:49:26.634Z,1520660966.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:49:27.036Z,1520660967.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:49:27.440Z,1520660967.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:49:27.846Z,1520660967.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:49:30.958Z,1520660970.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:49:31.141Z,1520660971.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:49:31.510Z,1520660971.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:49:31.912Z,1520660971.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:49:32.312Z,1520660972.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:49:32.737Z,1520660972.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:49:33.138Z,1520660973.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:49:33.537Z,1520660973.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:49:33.917Z,1520660973.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:49:34.337Z,1520660974.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:49:34.710Z,1520660974.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:49:35.121Z,1520660975.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:49:35.544Z,1520660975.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:49:35.942Z,1520660975.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:49:36.348Z,1520660976.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:49:36.734Z,1520660976.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:49:37.147Z,1520660977.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:49:37.515Z,1520660977.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:49:37.918Z,1520660977.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:49:38.318Z,1520660978.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:49:38.729Z,1520660978.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:49:39.127Z,1520660979.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:49:39.524Z,1520660979.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:49:39.921Z,1520660979.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:49:40.320Z,1520660980.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:49:40.718Z,1520660980.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:49:41.117Z,1520660981.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:49:41.524Z,1520660981.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:49:41.926Z,1520660981.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:49:42.328Z,1520660982.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:49:42.750Z,1520660982.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:49:43.117Z,1520660983.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:49:43.517Z,1520660983.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:49:43.925Z,1520660983.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:49:44.318Z,1520660984.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:49:44.723Z,1520660984.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:49:45.127Z,1520660985.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:49:45.522Z,1520660985.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:49:45.918Z,1520660985.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:49:46.328Z,1520660986.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:49:46.758Z,1520660986.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:49:47.128Z,1520660987.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:49:47.538Z,1520660987.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:49:47.941Z,1520660987.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:49:48.349Z,1520660988.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:49:48.724Z,1520660988.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:49:49.137Z,1520660989.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:49:49.553Z,1520660989.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:49:49.947Z,1520660989.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:49:50.353Z,1520660990.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:49:50.746Z,1520660990.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:49:51.146Z,1520660991.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:49:51.547Z,1520660991.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:49:51.925Z,1520660991.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:49:52.318Z,1520660992.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:49:52.718Z,1520660992.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:49:53.129Z,1520660993.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:49:53.530Z,1520660993.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:49:53.954Z,1520660993.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:49:54.326Z,1520660994.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:49:54.725Z,1520660994.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:49:55.117Z,1520660995.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:49:55.525Z,1520660995.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:49:55.923Z,1520660995.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:49:56.325Z,1520660996.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:49:56.727Z,1520660996.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:49:57.126Z,1520660997.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:49:57.525Z,1520660997.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:49:57.919Z,1520660997.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:49:58.317Z,1520660998.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:49:58.721Z,1520660998.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:49:59.117Z,1520660999.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:49:59.526Z,1520660999.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:49:59.928Z,1520660999.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:50:00.326Z,1520661000.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:50:00.718Z,1520661000.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:50:01.120Z,1520661001.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:50:01.525Z,1520661001.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:50:01.933Z,1520661001.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:50:02.320Z,1520661002.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:50:02.731Z,1520661002.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:50:03.133Z,1520661003.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:50:03.537Z,1520661003.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:50:03.920Z,1520661003.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:50:04.325Z,1520661004.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:50:04.728Z,1520661004.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:50:05.141Z,1520661005.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:50:05.527Z,1520661005.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:50:05.933Z,1520661005.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:50:06.334Z,1520661006.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:50:06.729Z,1520661006.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:50:07.125Z,1520661007.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:50:07.520Z,1520661007.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:50:07.923Z,1520661007.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:50:08.317Z,1520661008.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:50:08.737Z,1520661008.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:50:09.141Z,1520661009.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:50:09.533Z,1520661009.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:50:09.929Z,1520661009.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:50:10.322Z,1520661010.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:50:10.721Z,1520661010.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:50:11.129Z,1520661011.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:50:11.537Z,1520661011.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:50:11.941Z,1520661011.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:50:12.337Z,1520661012.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:50:12.725Z,1520661012.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:50:13.120Z,1520661013.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:50:13.520Z,1520661013.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:50:13.925Z,1520661013.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:50:14.337Z,1520661014.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:50:14.731Z,1520661014.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:50:15.131Z,1520661015.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:50:15.526Z,1520661015.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:50:15.925Z,1520661015.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:50:16.327Z,1520661016.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:50:16.732Z,1520661016.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:50:17.125Z,1520661017.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:50:17.531Z,1520661017.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:50:17.933Z,1520661017.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:50:18.331Z,1520661018.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:50:18.733Z,1520661018.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:50:19.122Z,1520661019.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:50:19.524Z,1520661019.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:50:19.929Z,1520661019.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:50:20.317Z,1520661020.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:50:20.732Z,1520661020.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:50:21.135Z,1520661021.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:50:21.525Z,1520661021.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:50:21.931Z,1520661021.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:50:22.332Z,1520661022.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:50:22.710Z,1520661022.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:50:23.129Z,1520661023.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:50:23.541Z,1520661023.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:50:23.945Z,1520661023.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:50:24.330Z,1520661024.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:50:24.724Z,1520661024.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:50:25.109Z,1520661025.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:50:25.517Z,1520661025.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:50:25.908Z,1520661025.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:50:26.316Z,1520661026.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:50:26.777Z,1520661026.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:50:27.127Z,1520661027.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:50:27.130Z,1520661027.130 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-03-10T05:50:27.130Z,1520661027.130 [Default:CheckIn:C.Wait] Stopped
2018-03-10T05:50:27.130Z,1520661027.130 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-03-10T05:50:27.130Z,1520661027.130 [Default:CheckIn:D] Running Loop=1
2018-03-10T05:50:27.549Z,1520661027.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:50:27.568Z,1520661027.568 [Default:CheckIn:D] Stopped
2018-03-10T05:50:27.568Z,1520661027.568 [Default:CheckIn:E] Running Loop=1
2018-03-10T05:50:27.919Z,1520661027.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:50:27.922Z,1520661027.922 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 31.160785 min 
2018-03-10T05:50:27.922Z,1520661027.922 [Default:CheckIn:E] Stopped
2018-03-10T05:50:27.922Z,1520661027.922 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-03-10T05:50:27.922Z,1520661027.922 [Default:CheckIn] Stopped
2018-03-10T05:50:27.922Z,1520661027.922 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-03-10T05:50:27.923Z,1520661027.923 [Default:CheckIn](INFO): Running loop #4
2018-03-10T05:50:27.923Z,1520661027.923 [Default:CheckIn] Running Loop=4
2018-03-10T05:50:27.923Z,1520661027.923 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-03-10T05:50:27.923Z,1520661027.923 [Default:CheckIn:Read_GPS] Running Loop=1
2018-03-10T05:50:31.481Z,1520661031.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:50:31.630Z,1520661031.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:50:32.045Z,1520661032.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:50:32.447Z,1520661032.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:50:32.838Z,1520661032.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:50:33.232Z,1520661033.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:50:33.631Z,1520661033.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:50:34.030Z,1520661034.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:50:34.441Z,1520661034.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:50:34.838Z,1520661034.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:50:35.241Z,1520661035.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:50:35.630Z,1520661035.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:50:36.027Z,1520661036.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:50:36.440Z,1520661036.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:50:36.841Z,1520661036.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:50:37.243Z,1520661037.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:50:37.626Z,1520661037.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:50:38.057Z,1520661038.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:50:38.448Z,1520661038.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:50:38.853Z,1520661038.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:50:39.247Z,1520661039.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:50:39.620Z,1520661039.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:50:40.017Z,1520661040.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:50:40.447Z,1520661040.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:50:40.848Z,1520661040.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:50:41.246Z,1520661041.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:50:41.619Z,1520661041.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:50:42.026Z,1520661042.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:50:42.449Z,1520661042.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:50:42.852Z,1520661042.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:50:43.247Z,1520661043.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:50:43.623Z,1520661043.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:50:44.029Z,1520661044.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:50:44.427Z,1520661044.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:50:44.852Z,1520661044.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:50:45.234Z,1520661045.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:50:45.627Z,1520661045.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:50:46.029Z,1520661046.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:50:46.431Z,1520661046.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:50:46.832Z,1520661046.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:50:47.230Z,1520661047.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:50:47.629Z,1520661047.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:50:48.025Z,1520661048.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:50:48.431Z,1520661048.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:50:48.850Z,1520661048.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:50:49.253Z,1520661049.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:50:49.654Z,1520661049.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:50:50.025Z,1520661050.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:50:50.431Z,1520661050.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:50:50.830Z,1520661050.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:50:51.238Z,1520661051.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:50:51.626Z,1520661051.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:50:52.029Z,1520661052.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:50:52.431Z,1520661052.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:50:52.831Z,1520661052.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:50:53.230Z,1520661053.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:50:53.633Z,1520661053.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:50:54.057Z,1520661054.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:50:54.437Z,1520661054.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:50:54.839Z,1520661054.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:50:55.231Z,1520661055.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:50:55.626Z,1520661055.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:50:56.028Z,1520661056.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:50:56.432Z,1520661056.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:50:56.830Z,1520661056.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:50:57.231Z,1520661057.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:50:57.627Z,1520661057.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:50:58.026Z,1520661058.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:50:58.431Z,1520661058.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:50:58.837Z,1520661058.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:50:59.232Z,1520661059.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:50:59.637Z,1520661059.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:51:00.029Z,1520661060.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:51:00.440Z,1520661060.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:51:00.866Z,1520661060.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:51:01.240Z,1520661061.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:51:01.625Z,1520661061.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:51:02.028Z,1520661062.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:51:02.442Z,1520661062.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:51:02.837Z,1520661062.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:51:03.240Z,1520661063.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:51:03.628Z,1520661063.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:51:04.026Z,1520661064.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:51:04.437Z,1520661064.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:51:04.849Z,1520661064.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:51:05.271Z,1520661065.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:51:05.630Z,1520661065.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:51:06.033Z,1520661066.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:51:06.445Z,1520661066.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:51:06.840Z,1520661066.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:51:07.239Z,1520661067.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:51:07.627Z,1520661067.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:51:08.028Z,1520661068.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:51:08.439Z,1520661068.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:51:08.839Z,1520661068.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:51:09.239Z,1520661069.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:51:09.629Z,1520661069.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:51:10.026Z,1520661070.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:51:10.445Z,1520661070.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:51:10.840Z,1520661070.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:51:11.238Z,1520661071.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:51:11.630Z,1520661071.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:51:12.034Z,1520661072.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:51:12.453Z,1520661072.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:51:12.841Z,1520661072.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:51:13.239Z,1520661073.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:51:13.628Z,1520661073.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:51:14.029Z,1520661074.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:51:14.439Z,1520661074.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:51:14.838Z,1520661074.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:51:15.240Z,1520661075.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:51:15.631Z,1520661075.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:51:16.026Z,1520661076.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:51:16.446Z,1520661076.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:51:16.857Z,1520661076.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:51:17.236Z,1520661077.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:51:17.631Z,1520661077.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:51:18.037Z,1520661078.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:51:18.445Z,1520661078.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:51:18.840Z,1520661078.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:51:19.245Z,1520661079.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:51:19.630Z,1520661079.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:51:20.030Z,1520661080.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:51:20.440Z,1520661080.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:51:20.839Z,1520661080.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:51:21.239Z,1520661081.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:51:21.631Z,1520661081.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:51:22.031Z,1520661082.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:51:22.441Z,1520661082.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:51:22.839Z,1520661082.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:51:23.239Z,1520661083.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:51:23.638Z,1520661083.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:51:24.041Z,1520661084.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:51:24.440Z,1520661084.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:51:24.854Z,1520661084.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:51:25.243Z,1520661085.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:51:25.633Z,1520661085.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:51:26.037Z,1520661086.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:51:26.442Z,1520661086.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:51:26.842Z,1520661086.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:51:27.242Z,1520661087.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:51:27.642Z,1520661087.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:51:28.052Z,1520661088.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:51:31.157Z,1520661091.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:51:31.313Z,1520661091.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:51:31.706Z,1520661091.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:51:32.096Z,1520661092.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:51:32.495Z,1520661092.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:51:32.893Z,1520661092.893 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:51:32.893Z,1520661092.893 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 12
2018-03-10T05:51:32.893Z,1520661092.893 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-03-10T05:51:32.895Z,1520661092.895 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:51:32.895Z,1520661092.895 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 12
2018-03-10T05:51:32.895Z,1520661092.895 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-03-10T05:51:32.897Z,1520661092.897 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:51:32.897Z,1520661092.897 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 12
2018-03-10T05:51:32.897Z,1520661092.897 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-10T05:51:32.983Z,1520661092.983 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-03-10T05:51:32.983Z,1520661092.983 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-03-10T05:51:32.984Z,1520661092.984 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-10T05:51:33.376Z,1520661093.376 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-03-10T05:51:33.376Z,1520661093.376 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 12
2018-03-10T05:51:33.376Z,1520661093.376 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-03-10T05:51:33.376Z,1520661093.376 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 12
2018-03-10T05:51:33.377Z,1520661093.377 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-10T05:51:33.377Z,1520661093.377 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 12
2018-03-10T05:51:33.706Z,1520661093.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-03-10T05:51:33.706Z,1520661093.706 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-03-10T05:51:33.707Z,1520661093.707 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-03-10T05:51:33.707Z,1520661093.707 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-03-10T05:51:33.708Z,1520661093.708 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-03-10T05:51:33.708Z,1520661093.708 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-03-10T05:51:33.708Z,1520661093.708 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-10T05:51:33.709Z,1520661093.709 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-10T05:51:33.709Z,1520661093.709 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-10T05:51:34.112Z,1520661094.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-03-10T05:51:34.113Z,1520661094.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:51:34.502Z,1520661094.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-03-10T05:51:34.504Z,1520661094.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:51:34.881Z,1520661094.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-03-10T05:51:34.882Z,1520661094.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:51:35.306Z,1520661095.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-03-10T05:51:35.308Z,1520661095.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:51:35.701Z,1520661095.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-03-10T05:51:35.702Z,1520661095.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:51:36.099Z,1520661096.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-03-10T05:51:36.100Z,1520661096.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:51:36.502Z,1520661096.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-03-10T05:51:36.502Z,1520661096.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:51:36.902Z,1520661096.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-03-10T05:51:36.903Z,1520661096.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:51:37.301Z,1520661097.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-03-10T05:51:37.302Z,1520661097.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:51:37.700Z,1520661097.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-03-10T05:51:37.701Z,1520661097.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:51:38.103Z,1520661098.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-03-10T05:51:38.104Z,1520661098.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:51:38.481Z,1520661098.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-03-10T05:51:38.482Z,1520661098.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:51:38.904Z,1520661098.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-03-10T05:51:38.905Z,1520661098.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:51:39.316Z,1520661099.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-03-10T05:51:39.317Z,1520661099.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:51:39.709Z,1520661099.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-03-10T05:51:39.710Z,1520661099.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:51:40.110Z,1520661100.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-03-10T05:51:40.111Z,1520661100.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:51:40.510Z,1520661100.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-03-10T05:51:40.515Z,1520661100.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:51:40.892Z,1520661100.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-03-10T05:51:40.893Z,1520661100.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:51:41.285Z,1520661101.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-03-10T05:51:41.286Z,1520661101.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:51:41.692Z,1520661101.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-03-10T05:51:41.693Z,1520661101.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:51:42.085Z,1520661102.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-03-10T05:51:42.086Z,1520661102.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:51:42.498Z,1520661102.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-03-10T05:51:42.515Z,1520661102.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:51:42.895Z,1520661102.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-03-10T05:51:42.896Z,1520661102.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:51:43.294Z,1520661103.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-03-10T05:51:43.295Z,1520661103.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:51:43.699Z,1520661103.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-03-10T05:51:43.700Z,1520661103.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:51:44.092Z,1520661104.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-03-10T05:51:44.093Z,1520661104.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:51:44.492Z,1520661104.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-03-10T05:51:44.493Z,1520661104.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:51:44.892Z,1520661104.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-03-10T05:51:44.893Z,1520661104.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:51:45.329Z,1520661105.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-03-10T05:51:45.329Z,1520661105.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:51:45.705Z,1520661105.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-03-10T05:51:45.706Z,1520661105.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:51:46.101Z,1520661106.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-03-10T05:51:46.102Z,1520661106.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:51:46.513Z,1520661106.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-03-10T05:51:46.514Z,1520661106.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:51:46.913Z,1520661106.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-03-10T05:51:46.914Z,1520661106.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:51:47.305Z,1520661107.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-03-10T05:51:47.305Z,1520661107.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:51:47.705Z,1520661107.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-03-10T05:51:47.706Z,1520661107.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:51:48.126Z,1520661108.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-03-10T05:51:48.127Z,1520661108.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:51:48.501Z,1520661108.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-03-10T05:51:48.502Z,1520661108.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:51:48.913Z,1520661108.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-03-10T05:51:48.914Z,1520661108.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:51:49.312Z,1520661109.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-03-10T05:51:49.312Z,1520661109.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:51:49.709Z,1520661109.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-03-10T05:51:49.710Z,1520661109.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:51:50.113Z,1520661110.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-03-10T05:51:50.114Z,1520661110.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:51:50.516Z,1520661110.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-03-10T05:51:50.517Z,1520661110.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:51:50.884Z,1520661110.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-03-10T05:51:50.885Z,1520661110.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:51:51.288Z,1520661111.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2018-03-10T05:51:51.289Z,1520661111.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:51:51.711Z,1520661111.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2018-03-10T05:51:51.712Z,1520661111.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:51:52.106Z,1520661112.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2018-03-10T05:51:52.107Z,1520661112.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:51:52.516Z,1520661112.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2018-03-10T05:51:52.516Z,1520661112.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:51:52.881Z,1520661112.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 20.0 s old, using for 20.0 s.
2018-03-10T05:51:52.881Z,1520661112.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:51:53.289Z,1520661113.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:51:53.687Z,1520661113.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:51:54.088Z,1520661114.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:51:54.516Z,1520661114.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:51:54.898Z,1520661114.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:51:55.319Z,1520661115.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:51:55.689Z,1520661115.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:51:56.088Z,1520661116.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:51:56.511Z,1520661116.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:51:56.917Z,1520661116.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:51:57.290Z,1520661117.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:51:57.723Z,1520661117.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:51:58.100Z,1520661118.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:51:58.528Z,1520661118.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:51:58.892Z,1520661118.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:51:59.291Z,1520661119.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:51:59.691Z,1520661119.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:52:00.090Z,1520661120.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:52:00.505Z,1520661120.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:52:00.898Z,1520661120.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:52:01.305Z,1520661121.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:52:01.690Z,1520661121.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:52:02.088Z,1520661122.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:52:02.493Z,1520661122.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:52:02.896Z,1520661122.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:52:03.297Z,1520661123.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:52:03.698Z,1520661123.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:52:04.098Z,1520661124.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:52:04.504Z,1520661124.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:52:04.890Z,1520661124.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:52:05.290Z,1520661125.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:52:05.692Z,1520661125.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:52:06.090Z,1520661126.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:52:06.505Z,1520661126.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:52:06.898Z,1520661126.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:52:07.305Z,1520661127.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:52:07.689Z,1520661127.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:52:08.093Z,1520661128.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:52:08.489Z,1520661128.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:52:08.898Z,1520661128.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:52:09.309Z,1520661129.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:52:09.725Z,1520661129.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:52:10.105Z,1520661130.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:52:10.499Z,1520661130.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:52:10.891Z,1520661130.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:52:11.289Z,1520661131.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:52:11.691Z,1520661131.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:52:12.089Z,1520661132.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:52:12.505Z,1520661132.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:52:12.904Z,1520661132.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:52:13.305Z,1520661133.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:52:13.693Z,1520661133.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:52:14.090Z,1520661134.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:52:14.489Z,1520661134.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:52:14.889Z,1520661134.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:52:15.296Z,1520661135.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:52:15.705Z,1520661135.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:52:16.105Z,1520661136.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:52:16.504Z,1520661136.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:52:16.889Z,1520661136.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:52:17.290Z,1520661137.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:52:17.696Z,1520661137.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:52:18.097Z,1520661138.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:52:18.505Z,1520661138.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:52:18.908Z,1520661138.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:52:19.305Z,1520661139.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:52:19.701Z,1520661139.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:52:20.137Z,1520661140.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:52:20.490Z,1520661140.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:52:20.890Z,1520661140.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:52:21.298Z,1520661141.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:52:21.709Z,1520661141.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:52:22.133Z,1520661142.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:52:22.504Z,1520661142.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:52:22.951Z,1520661142.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:52:23.301Z,1520661143.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:52:23.694Z,1520661143.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:52:24.093Z,1520661144.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:52:24.503Z,1520661144.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:52:24.908Z,1520661144.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:52:25.303Z,1520661145.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:52:25.697Z,1520661145.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:52:26.098Z,1520661146.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:52:26.493Z,1520661146.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:52:26.891Z,1520661146.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:52:27.292Z,1520661147.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:52:27.702Z,1520661147.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:52:28.113Z,1520661148.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:52:28.503Z,1520661148.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:52:28.891Z,1520661148.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:52:29.293Z,1520661149.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:52:32.411Z,1520661152.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:52:32.601Z,1520661152.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:52:32.987Z,1520661152.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:52:33.394Z,1520661153.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:52:33.786Z,1520661153.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:52:34.192Z,1520661154.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:52:34.608Z,1520661154.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:52:34.969Z,1520661154.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:52:35.377Z,1520661155.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:52:35.800Z,1520661155.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:52:36.201Z,1520661156.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:52:36.602Z,1520661156.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:52:36.969Z,1520661156.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:52:37.370Z,1520661157.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:52:37.773Z,1520661157.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:52:38.174Z,1520661158.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:52:38.575Z,1520661158.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:52:38.978Z,1520661158.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:52:39.380Z,1520661159.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:52:39.777Z,1520661159.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:52:40.174Z,1520661160.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:52:40.576Z,1520661160.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:52:40.973Z,1520661160.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:52:41.374Z,1520661161.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:52:41.779Z,1520661161.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:52:42.198Z,1520661162.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:52:42.578Z,1520661162.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:52:42.974Z,1520661162.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:52:43.377Z,1520661163.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:52:43.805Z,1520661163.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:52:44.174Z,1520661164.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:52:44.606Z,1520661164.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:52:44.978Z,1520661164.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:52:45.379Z,1520661165.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:52:45.781Z,1520661165.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:52:46.181Z,1520661166.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:52:46.581Z,1520661166.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:52:47.008Z,1520661167.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:52:47.374Z,1520661167.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:52:47.778Z,1520661167.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:52:48.177Z,1520661168.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:52:48.578Z,1520661168.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:52:48.979Z,1520661168.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:52:49.370Z,1520661169.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:52:49.775Z,1520661169.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:52:50.174Z,1520661170.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:52:50.579Z,1520661170.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:52:50.980Z,1520661170.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:52:51.379Z,1520661171.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:52:51.784Z,1520661171.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:52:52.174Z,1520661172.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:52:52.580Z,1520661172.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:52:52.977Z,1520661172.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:52:53.381Z,1520661173.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:52:53.789Z,1520661173.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:52:54.194Z,1520661174.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:52:54.592Z,1520661174.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:52:54.992Z,1520661174.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:52:55.373Z,1520661175.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:52:55.773Z,1520661175.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:52:56.190Z,1520661176.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:52:56.597Z,1520661176.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:52:56.986Z,1520661176.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:52:57.396Z,1520661177.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:52:57.765Z,1520661177.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:52:58.165Z,1520661178.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:52:58.567Z,1520661178.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:52:58.972Z,1520661178.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:52:59.400Z,1520661179.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:52:59.801Z,1520661179.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:53:00.178Z,1520661180.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:53:00.599Z,1520661180.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:53:00.974Z,1520661180.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:53:01.373Z,1520661181.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:53:01.781Z,1520661181.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:53:02.173Z,1520661182.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:53:02.606Z,1520661182.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:53:02.978Z,1520661182.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:53:03.407Z,1520661183.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:53:03.775Z,1520661183.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:53:04.173Z,1520661184.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:53:04.581Z,1520661184.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:53:04.978Z,1520661184.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:53:05.375Z,1520661185.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:53:05.779Z,1520661185.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:53:06.183Z,1520661186.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:53:06.585Z,1520661186.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:53:07.011Z,1520661187.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:53:07.372Z,1520661187.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:53:07.775Z,1520661187.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:53:08.175Z,1520661188.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:53:08.584Z,1520661188.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:53:08.989Z,1520661188.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:53:09.384Z,1520661189.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:53:09.781Z,1520661189.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:53:10.176Z,1520661190.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:53:10.586Z,1520661190.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:53:10.974Z,1520661190.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:53:11.381Z,1520661191.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:53:11.814Z,1520661191.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:53:12.184Z,1520661192.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:53:12.585Z,1520661192.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:53:12.978Z,1520661192.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:53:13.376Z,1520661193.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:53:13.775Z,1520661193.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:53:14.178Z,1520661194.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:53:14.595Z,1520661194.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:53:14.984Z,1520661194.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:53:15.393Z,1520661195.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:53:15.781Z,1520661195.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:53:16.185Z,1520661196.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:53:16.589Z,1520661196.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:53:16.980Z,1520661196.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:53:17.375Z,1520661197.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:53:17.788Z,1520661197.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:53:18.197Z,1520661198.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:53:18.586Z,1520661198.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:53:18.987Z,1520661198.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:53:19.388Z,1520661199.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:53:19.788Z,1520661199.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:53:20.181Z,1520661200.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:53:20.587Z,1520661200.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:53:20.988Z,1520661200.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:53:21.393Z,1520661201.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:53:21.778Z,1520661201.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:53:22.179Z,1520661202.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:53:22.584Z,1520661202.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:53:22.977Z,1520661202.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:53:23.388Z,1520661203.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:53:23.796Z,1520661203.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:53:24.209Z,1520661204.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:53:24.592Z,1520661204.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:53:24.962Z,1520661204.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:53:25.365Z,1520661205.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:53:25.768Z,1520661205.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:53:26.168Z,1520661206.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:53:26.590Z,1520661206.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:53:26.991Z,1520661206.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:53:27.402Z,1520661207.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:53:27.797Z,1520661207.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:53:28.172Z,1520661208.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:53:28.572Z,1520661208.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:53:28.973Z,1520661208.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:53:29.374Z,1520661209.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:53:32.522Z,1520661212.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:53:32.704Z,1520661212.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:53:33.100Z,1520661213.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:53:33.473Z,1520661213.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:53:33.881Z,1520661213.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:53:34.273Z,1520661214.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:53:34.701Z,1520661214.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:53:35.078Z,1520661215.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:53:35.500Z,1520661215.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:53:35.881Z,1520661215.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:53:36.279Z,1520661216.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:53:36.704Z,1520661216.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:53:37.083Z,1520661217.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:53:37.478Z,1520661217.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:53:37.889Z,1520661217.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:53:38.279Z,1520661218.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:53:38.676Z,1520661218.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:53:39.074Z,1520661219.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:53:39.474Z,1520661219.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:53:39.877Z,1520661219.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:53:40.273Z,1520661220.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:53:40.689Z,1520661220.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:53:41.081Z,1520661221.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:53:41.481Z,1520661221.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:53:41.881Z,1520661221.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:53:42.281Z,1520661222.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:53:42.674Z,1520661222.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:53:43.074Z,1520661223.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:53:43.482Z,1520661223.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:53:43.889Z,1520661223.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:53:44.289Z,1520661224.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:53:44.682Z,1520661224.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:53:45.093Z,1520661225.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:53:45.482Z,1520661225.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:53:45.877Z,1520661225.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:53:46.274Z,1520661226.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:53:46.714Z,1520661226.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:53:47.111Z,1520661227.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:53:47.484Z,1520661227.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:53:47.876Z,1520661227.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:53:48.284Z,1520661228.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:53:48.694Z,1520661228.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:53:49.097Z,1520661229.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:53:49.484Z,1520661229.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:53:49.942Z,1520661229.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:53:50.288Z,1520661230.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:53:50.688Z,1520661230.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:53:51.090Z,1520661231.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:53:51.480Z,1520661231.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:53:51.883Z,1520661231.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:53:52.266Z,1520661232.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:53:52.694Z,1520661232.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:53:53.089Z,1520661233.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:53:53.493Z,1520661233.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:53:53.864Z,1520661233.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:53:54.265Z,1520661234.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:53:54.667Z,1520661234.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:53:55.069Z,1520661235.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:53:55.487Z,1520661235.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:53:55.897Z,1520661235.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:53:56.301Z,1520661236.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:53:56.665Z,1520661236.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:53:57.089Z,1520661237.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:53:57.500Z,1520661237.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:53:57.873Z,1520661237.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:53:58.273Z,1520661238.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:53:58.697Z,1520661238.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:53:59.096Z,1520661239.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:53:59.499Z,1520661239.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:53:59.876Z,1520661239.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:54:00.277Z,1520661240.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:54:00.698Z,1520661240.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:54:01.112Z,1520661241.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:54:01.501Z,1520661241.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:54:01.886Z,1520661241.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:54:02.285Z,1520661242.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:54:02.673Z,1520661242.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:54:03.073Z,1520661243.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:54:03.472Z,1520661243.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:54:03.881Z,1520661243.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:54:04.272Z,1520661244.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:54:04.704Z,1520661244.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:54:05.129Z,1520661245.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:54:05.478Z,1520661245.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:54:05.875Z,1520661245.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:54:06.273Z,1520661246.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:54:06.666Z,1520661246.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:54:07.072Z,1520661247.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:54:07.498Z,1520661247.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:54:07.896Z,1520661247.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:54:08.298Z,1520661248.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:54:08.695Z,1520661248.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:54:09.073Z,1520661249.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:54:09.478Z,1520661249.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:54:09.901Z,1520661249.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:54:10.269Z,1520661250.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:54:10.701Z,1520661250.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:54:11.074Z,1520661251.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:54:11.482Z,1520661251.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:54:11.870Z,1520661251.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:54:12.270Z,1520661252.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:54:12.670Z,1520661252.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:54:13.069Z,1520661253.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:54:13.481Z,1520661253.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:54:13.909Z,1520661253.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:54:14.286Z,1520661254.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:54:14.681Z,1520661254.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:54:15.074Z,1520661255.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:54:15.474Z,1520661255.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:54:15.874Z,1520661255.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:54:16.281Z,1520661256.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:54:16.679Z,1520661256.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:54:17.079Z,1520661257.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:54:17.480Z,1520661257.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:54:17.880Z,1520661257.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:54:18.281Z,1520661258.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:54:18.674Z,1520661258.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:54:19.072Z,1520661259.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:54:19.479Z,1520661259.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:54:19.903Z,1520661259.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:54:20.279Z,1520661260.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:54:20.673Z,1520661260.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:54:21.073Z,1520661261.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:54:21.474Z,1520661261.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:54:21.912Z,1520661261.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:54:22.307Z,1520661262.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:54:22.678Z,1520661262.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:54:23.082Z,1520661263.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:54:23.478Z,1520661263.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:54:23.875Z,1520661263.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:54:24.275Z,1520661264.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:54:24.674Z,1520661264.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:54:25.076Z,1520661265.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:54:25.479Z,1520661265.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:54:25.879Z,1520661265.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:54:26.278Z,1520661266.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:54:26.680Z,1520661266.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:54:27.111Z,1520661267.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:54:27.474Z,1520661267.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:54:27.881Z,1520661267.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:54:28.281Z,1520661268.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:54:31.416Z,1520661271.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:54:31.569Z,1520661271.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:54:31.974Z,1520661271.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:54:32.364Z,1520661272.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:54:32.764Z,1520661272.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:54:33.161Z,1520661273.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:54:33.571Z,1520661273.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:54:33.970Z,1520661273.970 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:54:33.970Z,1520661273.970 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 13
2018-03-10T05:54:33.970Z,1520661273.970 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-03-10T05:54:33.972Z,1520661273.972 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:54:33.972Z,1520661273.972 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 13
2018-03-10T05:54:33.972Z,1520661273.972 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-03-10T05:54:33.974Z,1520661273.974 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:54:33.974Z,1520661273.974 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 13
2018-03-10T05:54:33.974Z,1520661273.974 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-10T05:54:34.051Z,1520661274.051 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-03-10T05:54:34.051Z,1520661274.051 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-03-10T05:54:34.052Z,1520661274.052 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-10T05:54:34.463Z,1520661274.463 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-03-10T05:54:34.463Z,1520661274.463 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 13
2018-03-10T05:54:34.464Z,1520661274.464 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-03-10T05:54:34.464Z,1520661274.464 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 13
2018-03-10T05:54:34.464Z,1520661274.464 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-10T05:54:34.464Z,1520661274.464 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 13
2018-03-10T05:54:34.776Z,1520661274.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-03-10T05:54:34.776Z,1520661274.776 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-03-10T05:54:34.777Z,1520661274.777 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-03-10T05:54:34.777Z,1520661274.777 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-03-10T05:54:34.777Z,1520661274.777 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-03-10T05:54:34.778Z,1520661274.778 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-03-10T05:54:34.778Z,1520661274.778 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-10T05:54:34.778Z,1520661274.778 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-10T05:54:34.779Z,1520661274.779 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-10T05:54:35.158Z,1520661275.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-03-10T05:54:35.159Z,1520661275.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:54:35.556Z,1520661275.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-03-10T05:54:35.557Z,1520661275.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:54:35.955Z,1520661275.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-03-10T05:54:35.956Z,1520661275.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:54:36.353Z,1520661276.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-03-10T05:54:36.354Z,1520661276.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:54:36.782Z,1520661276.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-03-10T05:54:36.782Z,1520661276.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:54:37.182Z,1520661277.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-03-10T05:54:37.183Z,1520661277.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:54:37.582Z,1520661277.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-03-10T05:54:37.583Z,1520661277.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:54:37.953Z,1520661277.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-03-10T05:54:37.954Z,1520661277.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:54:38.356Z,1520661278.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-03-10T05:54:38.357Z,1520661278.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:54:38.754Z,1520661278.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-03-10T05:54:38.755Z,1520661278.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:54:39.153Z,1520661279.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-03-10T05:54:39.154Z,1520661279.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:54:39.576Z,1520661279.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-03-10T05:54:39.577Z,1520661279.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:54:39.997Z,1520661279.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-03-10T05:54:39.998Z,1520661279.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:54:40.388Z,1520661280.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-03-10T05:54:40.389Z,1520661280.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:54:40.758Z,1520661280.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-03-10T05:54:40.759Z,1520661280.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:54:41.157Z,1520661281.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-03-10T05:54:41.158Z,1520661281.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:54:41.564Z,1520661281.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-03-10T05:54:41.565Z,1520661281.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:54:41.964Z,1520661281.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-03-10T05:54:41.965Z,1520661281.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:54:42.356Z,1520661282.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-03-10T05:54:42.357Z,1520661282.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:54:42.763Z,1520661282.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-03-10T05:54:42.764Z,1520661282.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:54:43.162Z,1520661283.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-03-10T05:54:43.163Z,1520661283.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:54:43.563Z,1520661283.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-03-10T05:54:43.564Z,1520661283.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:54:43.957Z,1520661283.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-03-10T05:54:43.958Z,1520661283.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:54:44.359Z,1520661284.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-03-10T05:54:44.360Z,1520661284.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:54:44.758Z,1520661284.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-03-10T05:54:44.759Z,1520661284.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:54:45.157Z,1520661285.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-03-10T05:54:45.158Z,1520661285.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:54:45.562Z,1520661285.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-03-10T05:54:45.564Z,1520661285.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:54:45.962Z,1520661285.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-03-10T05:54:45.963Z,1520661285.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:54:46.362Z,1520661286.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-03-10T05:54:46.363Z,1520661286.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:54:46.760Z,1520661286.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-03-10T05:54:46.761Z,1520661286.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:54:47.162Z,1520661287.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-03-10T05:54:47.163Z,1520661287.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:54:47.592Z,1520661287.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-03-10T05:54:47.593Z,1520661287.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:54:47.958Z,1520661287.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-03-10T05:54:47.959Z,1520661287.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:54:48.356Z,1520661288.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-03-10T05:54:48.357Z,1520661288.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:54:48.763Z,1520661288.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-03-10T05:54:48.764Z,1520661288.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:54:49.162Z,1520661289.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-03-10T05:54:49.164Z,1520661289.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:54:49.562Z,1520661289.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-03-10T05:54:49.563Z,1520661289.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:54:49.957Z,1520661289.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-03-10T05:54:49.958Z,1520661289.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:54:50.359Z,1520661290.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-03-10T05:54:50.360Z,1520661290.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:54:50.764Z,1520661290.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-03-10T05:54:50.765Z,1520661290.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:54:51.158Z,1520661291.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-03-10T05:54:51.159Z,1520661291.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:54:51.563Z,1520661291.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-03-10T05:54:51.564Z,1520661291.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:54:51.966Z,1520661291.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-03-10T05:54:51.967Z,1520661291.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:54:52.362Z,1520661292.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2018-03-10T05:54:52.363Z,1520661292.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:54:52.765Z,1520661292.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2018-03-10T05:54:52.766Z,1520661292.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:54:53.172Z,1520661293.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2018-03-10T05:54:53.173Z,1520661293.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:54:53.558Z,1520661293.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2018-03-10T05:54:53.559Z,1520661293.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:54:53.959Z,1520661293.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 20.0 s old, using for 20.0 s.
2018-03-10T05:54:53.960Z,1520661293.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:54:54.355Z,1520661294.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:54:54.765Z,1520661294.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:54:55.166Z,1520661295.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:54:55.565Z,1520661295.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:54:55.958Z,1520661295.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:54:56.362Z,1520661296.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:54:56.761Z,1520661296.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:54:57.160Z,1520661297.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:54:57.566Z,1520661297.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:54:57.966Z,1520661297.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:54:58.366Z,1520661298.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:54:58.762Z,1520661298.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:54:59.161Z,1520661299.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:54:59.565Z,1520661299.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:54:59.981Z,1520661299.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:55:00.361Z,1520661300.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:55:00.770Z,1520661300.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:55:01.171Z,1520661301.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:55:01.570Z,1520661301.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:55:01.960Z,1520661301.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:55:02.359Z,1520661302.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:55:02.843Z,1520661302.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:55:03.159Z,1520661303.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:55:03.571Z,1520661303.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:55:03.977Z,1520661303.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:55:04.369Z,1520661304.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:55:04.761Z,1520661304.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:55:05.168Z,1520661305.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:55:05.581Z,1520661305.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:55:05.964Z,1520661305.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:55:06.365Z,1520661306.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:55:06.770Z,1520661306.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:55:07.171Z,1520661307.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:55:07.573Z,1520661307.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:55:07.961Z,1520661307.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:55:08.361Z,1520661308.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:55:08.769Z,1520661308.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:55:09.159Z,1520661309.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:55:09.571Z,1520661309.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:55:09.977Z,1520661309.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:55:10.370Z,1520661310.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:55:10.763Z,1520661310.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:55:11.165Z,1520661311.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:55:11.560Z,1520661311.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:55:11.960Z,1520661311.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:55:12.366Z,1520661312.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:55:12.789Z,1520661312.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:55:13.171Z,1520661313.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:55:13.581Z,1520661313.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:55:13.959Z,1520661313.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:55:14.361Z,1520661314.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:55:14.761Z,1520661314.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:55:15.157Z,1520661315.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:55:15.572Z,1520661315.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:55:15.974Z,1520661315.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:55:16.371Z,1520661316.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:55:16.765Z,1520661316.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:55:17.169Z,1520661317.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:55:17.567Z,1520661317.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:55:17.981Z,1520661317.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:55:18.362Z,1520661318.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:55:18.771Z,1520661318.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:55:19.172Z,1520661319.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:55:19.573Z,1520661319.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:55:19.967Z,1520661319.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:55:20.367Z,1520661320.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:55:20.768Z,1520661320.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:55:21.150Z,1520661321.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:55:21.576Z,1520661321.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:55:21.974Z,1520661321.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:55:22.374Z,1520661322.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:55:22.751Z,1520661322.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:55:23.150Z,1520661323.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:55:23.553Z,1520661323.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:55:23.952Z,1520661323.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:55:24.353Z,1520661324.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:55:24.779Z,1520661324.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:55:24.855Z,1520661324.855 [CBIT](DEBUG): EFC running - data check-sum false
2018-03-10T05:55:25.193Z,1520661325.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:55:25.589Z,1520661325.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:55:25.953Z,1520661325.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:55:26.354Z,1520661326.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:55:26.753Z,1520661326.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:55:27.157Z,1520661327.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:55:27.576Z,1520661327.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:55:27.974Z,1520661327.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:55:27.978Z,1520661327.978 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-03-10T05:50:27.9Z
2018-03-10T05:55:27.978Z,1520661327.978 [Default:CheckIn:Read_GPS] Stopped
2018-03-10T05:55:27.978Z,1520661327.978 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-03-10T05:55:28.375Z,1520661328.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:55:31.649Z,1520661331.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:55:31.835Z,1520661331.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:55:32.156Z,1520661332.156 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20180310T051512/Courier0016.lzma
2018-03-10T05:55:32.217Z,1520661332.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:55:32.611Z,1520661332.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:55:32.949Z,1520661332.949 [DataOverHttps](INFO): Moved sent file to Logs/20180310T051512/Courier0016.lzma.bak
2018-03-10T05:55:32.949Z,1520661332.949 [DataOverHttps](INFO): SBD MOMSN=8002067
2018-03-10T05:55:33.045Z,1520661333.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:55:33.689Z,1520661333.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:55:33.825Z,1520661333.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:55:34.246Z,1520661334.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:55:34.649Z,1520661334.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:55:35.053Z,1520661335.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:55:35.421Z,1520661335.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:55:35.825Z,1520661335.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:55:36.249Z,1520661336.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:55:39.405Z,1520661339.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:55:39.590Z,1520661339.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:55:39.965Z,1520661339.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:55:40.348Z,1520661340.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:55:40.753Z,1520661340.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:55:41.145Z,1520661341.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:55:41.556Z,1520661341.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:55:44.865Z,1520661344.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:55:44.977Z,1520661344.977 [DataOverHttps](INFO): Sending 172 bytes from file Logs/20180310T051512/Express0017.lzma
2018-03-10T05:55:45.056Z,1520661345.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:55:45.429Z,1520661345.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:55:45.773Z,1520661345.773 [DataOverHttps](INFO): Moved sent file to Logs/20180310T051512/Express0017.lzma.bak
2018-03-10T05:55:45.773Z,1520661345.773 [DataOverHttps](INFO): SBD MOMSN=8002069
2018-03-10T05:55:45.857Z,1520661345.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:55:46.754Z,1520661346.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:55:46.773Z,1520661346.773 [Default:CheckIn:Read_Iridium] Stopped
2018-03-10T05:55:46.774Z,1520661346.774 [Default:CheckIn:C.Wait] Running Loop=1
2018-03-10T05:55:46.774Z,1520661346.774 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-03-10T05:55:46.944Z,1520661346.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:55:47.350Z,1520661347.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:55:51.129Z,1520661351.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:55:51.287Z,1520661351.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:55:51.684Z,1520661351.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:55:52.101Z,1520661352.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:55:52.488Z,1520661352.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:55:52.891Z,1520661352.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:55:53.288Z,1520661353.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:55:53.679Z,1520661353.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:55:54.085Z,1520661354.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:55:54.481Z,1520661354.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:55:54.880Z,1520661354.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:55:55.279Z,1520661355.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:55:55.688Z,1520661355.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:55:56.090Z,1520661356.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:55:56.487Z,1520661356.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:55:56.881Z,1520661356.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:55:57.297Z,1520661357.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:55:57.693Z,1520661357.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:55:58.066Z,1520661358.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:55:58.488Z,1520661358.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:55:58.901Z,1520661358.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:55:59.290Z,1520661359.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:55:59.666Z,1520661359.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:56:00.089Z,1520661360.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:56:00.470Z,1520661360.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:56:00.893Z,1520661360.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:56:01.269Z,1520661361.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:56:01.699Z,1520661361.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:56:02.094Z,1520661362.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:56:02.498Z,1520661362.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:56:02.870Z,1520661362.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:56:03.270Z,1520661363.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:56:03.678Z,1520661363.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:56:04.070Z,1520661364.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:56:04.501Z,1520661364.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:56:04.917Z,1520661364.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:56:05.301Z,1520661365.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:56:05.673Z,1520661365.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:56:06.074Z,1520661366.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:56:06.474Z,1520661366.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:56:06.876Z,1520661366.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:56:07.273Z,1520661367.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:56:07.679Z,1520661367.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:56:08.100Z,1520661368.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:56:08.480Z,1520661368.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:56:08.884Z,1520661368.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:56:09.278Z,1520661369.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:56:09.682Z,1520661369.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:56:10.111Z,1520661370.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:56:10.490Z,1520661370.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:56:10.886Z,1520661370.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:56:11.293Z,1520661371.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:56:11.677Z,1520661371.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:56:12.076Z,1520661372.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:56:12.485Z,1520661372.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:56:12.877Z,1520661372.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:56:13.275Z,1520661373.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:56:13.687Z,1520661373.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:56:14.087Z,1520661374.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:56:14.486Z,1520661374.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:56:14.877Z,1520661374.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:56:15.282Z,1520661375.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:56:15.674Z,1520661375.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:56:16.077Z,1520661376.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:56:16.489Z,1520661376.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:56:16.913Z,1520661376.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:56:17.286Z,1520661377.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:56:17.681Z,1520661377.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:56:18.074Z,1520661378.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:56:18.481Z,1520661378.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:56:18.874Z,1520661378.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:56:19.273Z,1520661379.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:56:19.687Z,1520661379.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:56:20.093Z,1520661380.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:56:20.493Z,1520661380.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:56:20.877Z,1520661380.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:56:21.281Z,1520661381.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:56:21.685Z,1520661381.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:56:22.081Z,1520661382.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:56:22.501Z,1520661382.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:56:22.887Z,1520661382.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:56:23.288Z,1520661383.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:56:23.678Z,1520661383.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:56:24.081Z,1520661384.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:56:24.485Z,1520661384.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:56:24.874Z,1520661384.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:56:25.281Z,1520661385.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:56:25.693Z,1520661385.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:56:26.090Z,1520661386.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:56:26.483Z,1520661386.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:56:26.922Z,1520661386.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:56:27.273Z,1520661387.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:56:27.667Z,1520661387.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:56:28.081Z,1520661388.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:56:28.495Z,1520661388.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:56:28.984Z,1520661388.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:56:29.309Z,1520661389.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:56:29.684Z,1520661389.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:56:30.082Z,1520661390.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:56:30.466Z,1520661390.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:56:30.888Z,1520661390.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:56:31.293Z,1520661391.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:56:31.696Z,1520661391.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:56:32.094Z,1520661392.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:56:32.493Z,1520661392.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:56:32.869Z,1520661392.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:56:33.296Z,1520661393.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:56:33.673Z,1520661393.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:56:34.066Z,1520661394.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:56:34.502Z,1520661394.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:56:34.906Z,1520661394.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:56:35.292Z,1520661395.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:56:35.666Z,1520661395.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:56:36.096Z,1520661396.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:56:36.469Z,1520661396.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:56:36.866Z,1520661396.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:56:37.265Z,1520661397.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:56:37.695Z,1520661397.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:56:38.094Z,1520661398.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:56:38.493Z,1520661398.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:56:38.866Z,1520661398.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:56:39.266Z,1520661399.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:56:39.666Z,1520661399.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:56:40.066Z,1520661400.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:56:40.493Z,1520661400.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:56:40.891Z,1520661400.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:56:41.295Z,1520661401.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:56:41.672Z,1520661401.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:56:42.104Z,1520661402.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:56:42.473Z,1520661402.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:56:42.873Z,1520661402.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:56:43.266Z,1520661403.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:56:43.699Z,1520661403.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:56:44.095Z,1520661404.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:56:44.498Z,1520661404.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:56:44.871Z,1520661404.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:56:45.277Z,1520661405.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:56:45.671Z,1520661405.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:56:46.077Z,1520661406.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:56:46.496Z,1520661406.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:56:46.896Z,1520661406.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:56:47.303Z,1520661407.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:56:50.377Z,1520661410.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:56:50.552Z,1520661410.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:56:50.953Z,1520661410.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:56:51.347Z,1520661411.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:56:51.750Z,1520661411.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:56:52.129Z,1520661412.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:56:52.525Z,1520661412.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:56:52.930Z,1520661412.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:56:53.350Z,1520661413.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:56:53.758Z,1520661413.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:56:54.165Z,1520661414.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:56:54.577Z,1520661414.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:56:54.926Z,1520661414.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:56:55.331Z,1520661415.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:56:55.726Z,1520661415.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:56:56.133Z,1520661416.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:56:56.553Z,1520661416.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:56:56.954Z,1520661416.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:56:57.354Z,1520661417.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:56:57.730Z,1520661417.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:56:58.125Z,1520661418.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:56:58.525Z,1520661418.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:56:58.958Z,1520661418.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:56:59.328Z,1520661419.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:56:59.761Z,1520661419.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:57:00.152Z,1520661420.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:57:00.537Z,1520661420.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:57:00.929Z,1520661420.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:57:01.325Z,1520661421.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:57:01.785Z,1520661421.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:57:02.144Z,1520661422.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:57:02.562Z,1520661422.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:57:02.942Z,1520661422.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:57:03.342Z,1520661423.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:57:03.733Z,1520661423.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:57:04.136Z,1520661424.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:57:04.524Z,1520661424.524 [BPC1](ERROR): Failed to receive battery data
2018-03-10T05:57:04.524Z,1520661424.524 [BPC1] Communications Fault, FailCount= 1
2018-03-10T05:57:04.525Z,1520661424.525 [BPC1](ERROR): Communications Fault
2018-03-10T05:57:04.532Z,1520661424.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:57:04.610Z,1520661424.610 [CBIT](ERROR): Communications Fault in component: BPC1
2018-03-10T05:57:04.941Z,1520661424.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:57:05.337Z,1520661425.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:57:05.742Z,1520661425.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:57:05.825Z,1520661425.825 [CBIT](INFO): Clearing failed state for component BPC1
2018-03-10T05:57:05.825Z,1520661425.825 [BPC1] No Fault, FailCount= 1
2018-03-10T05:57:06.197Z,1520661426.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:57:06.553Z,1520661426.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:57:06.936Z,1520661426.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:57:07.333Z,1520661427.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:57:07.731Z,1520661427.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:57:08.135Z,1520661428.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:57:08.546Z,1520661428.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:57:08.945Z,1520661428.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:57:09.346Z,1520661429.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:57:09.733Z,1520661429.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:57:10.137Z,1520661430.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:57:10.540Z,1520661430.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:57:10.933Z,1520661430.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:57:11.335Z,1520661431.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:57:11.746Z,1520661431.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:57:12.145Z,1520661432.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:57:12.543Z,1520661432.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:57:12.932Z,1520661432.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:57:13.339Z,1520661433.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:57:13.736Z,1520661433.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:57:14.134Z,1520661434.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:57:14.545Z,1520661434.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:57:14.943Z,1520661434.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:57:15.353Z,1520661435.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:57:15.734Z,1520661435.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:57:16.136Z,1520661436.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:57:16.534Z,1520661436.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:57:16.934Z,1520661436.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:57:17.332Z,1520661437.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:57:17.745Z,1520661437.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:57:18.146Z,1520661438.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:57:18.553Z,1520661438.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:57:18.935Z,1520661438.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:57:19.330Z,1520661439.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:57:19.737Z,1520661439.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:57:20.136Z,1520661440.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:57:20.546Z,1520661440.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:57:20.946Z,1520661440.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:57:21.346Z,1520661441.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:57:21.734Z,1520661441.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:57:22.140Z,1520661442.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:57:22.535Z,1520661442.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:57:22.938Z,1520661442.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:57:23.340Z,1520661443.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:57:23.746Z,1520661443.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:57:24.146Z,1520661444.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:57:24.553Z,1520661444.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:57:24.936Z,1520661444.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:57:25.335Z,1520661445.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:57:25.737Z,1520661445.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:57:26.134Z,1520661446.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:57:26.547Z,1520661446.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:57:26.948Z,1520661446.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:57:27.346Z,1520661447.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:57:27.738Z,1520661447.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:57:28.135Z,1520661448.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:57:28.535Z,1520661448.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:57:28.941Z,1520661448.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:57:29.335Z,1520661449.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:57:29.753Z,1520661449.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:57:30.146Z,1520661450.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:57:30.547Z,1520661450.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:57:30.939Z,1520661450.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:57:31.339Z,1520661451.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:57:31.736Z,1520661451.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:57:32.145Z,1520661452.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:57:32.547Z,1520661452.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:57:32.953Z,1520661452.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:57:33.347Z,1520661453.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:57:33.739Z,1520661453.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:57:34.139Z,1520661454.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:57:34.518Z,1520661454.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:57:34.947Z,1520661454.947 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:57:34.947Z,1520661454.947 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 14
2018-03-10T05:57:34.947Z,1520661454.947 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-03-10T05:57:34.949Z,1520661454.949 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:57:34.949Z,1520661454.949 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 14
2018-03-10T05:57:34.949Z,1520661454.949 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-03-10T05:57:34.950Z,1520661454.950 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:57:34.955Z,1520661454.955 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 14
2018-03-10T05:57:34.955Z,1520661454.955 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-10T05:57:35.067Z,1520661455.067 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-03-10T05:57:35.067Z,1520661455.067 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-03-10T05:57:35.067Z,1520661455.067 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-10T05:57:35.427Z,1520661455.427 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-03-10T05:57:35.427Z,1520661455.427 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 14
2018-03-10T05:57:35.427Z,1520661455.427 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-03-10T05:57:35.427Z,1520661455.427 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 14
2018-03-10T05:57:35.428Z,1520661455.428 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-10T05:57:35.428Z,1520661455.428 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 14
2018-03-10T05:57:35.749Z,1520661455.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-03-10T05:57:35.750Z,1520661455.750 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-03-10T05:57:35.750Z,1520661455.750 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-03-10T05:57:35.750Z,1520661455.750 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-03-10T05:57:35.751Z,1520661455.751 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-03-10T05:57:35.751Z,1520661455.751 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-03-10T05:57:35.752Z,1520661455.752 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-10T05:57:35.752Z,1520661455.752 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-10T05:57:35.752Z,1520661455.752 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-10T05:57:36.158Z,1520661456.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-03-10T05:57:36.163Z,1520661456.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:57:36.533Z,1520661456.533 [BPC1](FAULT): Failed to initialize
2018-03-10T05:57:36.533Z,1520661456.533 [BPC1] Communications Fault, FailCount= 2
2018-03-10T05:57:36.533Z,1520661456.533 [BPC1](ERROR): Communications Fault
2018-03-10T05:57:36.545Z,1520661456.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-03-10T05:57:36.546Z,1520661456.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:57:36.659Z,1520661456.659 [CBIT](ERROR): Communications Fault in component: BPC1
2018-03-10T05:57:36.930Z,1520661456.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-03-10T05:57:36.931Z,1520661456.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:57:37.333Z,1520661457.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-03-10T05:57:37.334Z,1520661457.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:57:37.733Z,1520661457.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-03-10T05:57:37.734Z,1520661457.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:57:37.811Z,1520661457.811 [CBIT](INFO): Clearing failed state for component BPC1
2018-03-10T05:57:37.811Z,1520661457.811 [BPC1] No Fault, FailCount= 2
2018-03-10T05:57:38.180Z,1520661458.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-03-10T05:57:38.181Z,1520661458.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:57:38.538Z,1520661458.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-03-10T05:57:38.540Z,1520661458.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:57:38.933Z,1520661458.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-03-10T05:57:38.934Z,1520661458.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:57:39.333Z,1520661459.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-03-10T05:57:39.334Z,1520661459.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:57:39.733Z,1520661459.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-03-10T05:57:39.733Z,1520661459.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:57:40.133Z,1520661460.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-03-10T05:57:40.134Z,1520661460.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:57:40.524Z,1520661460.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-03-10T05:57:40.525Z,1520661460.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:57:40.933Z,1520661460.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-03-10T05:57:40.934Z,1520661460.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:57:41.334Z,1520661461.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-03-10T05:57:41.334Z,1520661461.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:57:41.746Z,1520661461.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-03-10T05:57:41.763Z,1520661461.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:57:42.142Z,1520661462.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-03-10T05:57:42.143Z,1520661462.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:57:42.538Z,1520661462.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-03-10T05:57:42.539Z,1520661462.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:57:42.926Z,1520661462.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-03-10T05:57:42.927Z,1520661462.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:57:43.340Z,1520661463.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-03-10T05:57:43.341Z,1520661463.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:57:43.737Z,1520661463.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-03-10T05:57:43.738Z,1520661463.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:57:44.140Z,1520661464.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-03-10T05:57:44.141Z,1520661464.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:57:44.538Z,1520661464.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-03-10T05:57:44.539Z,1520661464.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:57:44.942Z,1520661464.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-03-10T05:57:44.943Z,1520661464.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:57:45.344Z,1520661465.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-03-10T05:57:45.345Z,1520661465.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:57:45.733Z,1520661465.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-03-10T05:57:45.734Z,1520661465.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:57:46.137Z,1520661466.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-03-10T05:57:46.138Z,1520661466.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:57:46.535Z,1520661466.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-03-10T05:57:46.536Z,1520661466.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:57:46.940Z,1520661466.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-03-10T05:57:46.941Z,1520661466.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:57:47.344Z,1520661467.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-03-10T05:57:47.345Z,1520661467.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:57:51.643Z,1520661471.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.7 s old, using for 20.0 s.
2018-03-10T05:57:51.644Z,1520661471.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:57:51.824Z,1520661471.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.9 s old, using for 20.0 s.
2018-03-10T05:57:51.825Z,1520661471.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:57:52.225Z,1520661472.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.3 s old, using for 20.0 s.
2018-03-10T05:57:52.226Z,1520661472.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:57:52.613Z,1520661472.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.7 s old, using for 20.0 s.
2018-03-10T05:57:52.619Z,1520661472.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:57:53.006Z,1520661473.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.1 s old, using for 20.0 s.
2018-03-10T05:57:53.007Z,1520661473.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:57:53.376Z,1520661473.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2018-03-10T05:57:53.377Z,1520661473.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:57:53.798Z,1520661473.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.9 s old, using for 20.0 s.
2018-03-10T05:57:53.803Z,1520661473.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:57:54.212Z,1520661474.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.3 s old, using for 20.0 s.
2018-03-10T05:57:54.213Z,1520661474.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:57:54.610Z,1520661474.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.7 s old, using for 20.0 s.
2018-03-10T05:57:54.615Z,1520661474.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:57:54.986Z,1520661474.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:57:55.377Z,1520661475.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:57:55.785Z,1520661475.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:57:56.181Z,1520661476.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:57:56.612Z,1520661476.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:57:56.994Z,1520661476.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:57:57.381Z,1520661477.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:57:57.782Z,1520661477.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:57:58.184Z,1520661478.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:57:58.589Z,1520661478.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:57:58.981Z,1520661478.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:57:59.383Z,1520661479.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:57:59.811Z,1520661479.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:58:00.186Z,1520661480.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:58:00.587Z,1520661480.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:58:00.977Z,1520661480.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:58:01.381Z,1520661481.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:58:01.782Z,1520661481.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:58:02.183Z,1520661482.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:58:02.588Z,1520661482.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:58:02.991Z,1520661482.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:58:03.386Z,1520661483.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:58:03.783Z,1520661483.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:58:04.183Z,1520661484.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:58:04.595Z,1520661484.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:58:04.981Z,1520661484.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:58:05.389Z,1520661485.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:58:05.790Z,1520661485.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:58:06.194Z,1520661486.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:58:06.590Z,1520661486.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:58:06.977Z,1520661486.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:58:07.382Z,1520661487.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:58:07.794Z,1520661487.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:58:08.171Z,1520661488.171 [BPC1](FAULT): Failed to initialize
2018-03-10T05:58:08.171Z,1520661488.171 [BPC1] Communications Fault, FailCount= 3
2018-03-10T05:58:08.171Z,1520661488.171 [BPC1](ERROR): Communications Fault
2018-03-10T05:58:08.179Z,1520661488.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:58:08.251Z,1520661488.251 [CBIT](ERROR): Communications Fault in component: BPC1
2018-03-10T05:58:08.595Z,1520661488.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:58:08.996Z,1520661488.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:58:09.401Z,1520661489.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:58:09.491Z,1520661489.491 [CBIT](INFO): Clearing failed state for component BPC1
2018-03-10T05:58:09.491Z,1520661489.491 [BPC1] No Fault, FailCount= 3
2018-03-10T05:58:09.841Z,1520661489.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:58:10.186Z,1520661490.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:58:10.583Z,1520661490.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:58:10.983Z,1520661490.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:58:11.384Z,1520661491.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:58:11.801Z,1520661491.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:58:12.198Z,1520661492.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:58:12.600Z,1520661492.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:58:12.988Z,1520661492.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:58:13.383Z,1520661493.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:58:13.784Z,1520661493.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:58:14.194Z,1520661494.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:58:14.594Z,1520661494.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:58:15.083Z,1520661495.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:58:15.421Z,1520661495.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:58:15.794Z,1520661495.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:58:16.189Z,1520661496.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:58:16.585Z,1520661496.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:58:16.986Z,1520661496.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:58:17.388Z,1520661497.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:58:17.877Z,1520661497.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:58:18.224Z,1520661498.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:58:18.605Z,1520661498.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:58:18.989Z,1520661498.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:58:19.392Z,1520661499.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:58:19.784Z,1520661499.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:58:20.184Z,1520661500.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:58:20.599Z,1520661500.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:58:20.996Z,1520661500.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:58:21.394Z,1520661501.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:58:21.783Z,1520661501.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:58:22.187Z,1520661502.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:58:22.581Z,1520661502.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:58:22.983Z,1520661502.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:58:23.389Z,1520661503.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:58:23.800Z,1520661503.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:58:24.194Z,1520661504.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:58:24.601Z,1520661504.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:58:24.979Z,1520661504.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:58:25.382Z,1520661505.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:58:25.784Z,1520661505.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:58:26.183Z,1520661506.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:58:26.597Z,1520661506.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:58:26.000Z,1520661507.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:58:27.390Z,1520661507.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:58:27.782Z,1520661507.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:58:28.189Z,1520661508.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:58:28.590Z,1520661508.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:58:28.989Z,1520661508.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:58:29.393Z,1520661509.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:58:29.797Z,1520661509.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:58:30.199Z,1520661510.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:58:30.596Z,1520661510.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:58:30.986Z,1520661510.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:58:31.385Z,1520661511.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:58:31.791Z,1520661511.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:58:32.181Z,1520661512.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:58:32.595Z,1520661512.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:58:33.004Z,1520661513.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:58:33.398Z,1520661513.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:58:33.784Z,1520661513.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:58:34.185Z,1520661514.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:58:34.601Z,1520661514.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:58:35.000Z,1520661515.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:58:35.374Z,1520661515.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:58:35.797Z,1520661515.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:58:36.203Z,1520661516.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:58:36.603Z,1520661516.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:58:36.997Z,1520661516.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:58:37.380Z,1520661517.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:58:37.777Z,1520661517.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:58:38.177Z,1520661518.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:58:38.606Z,1520661518.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:58:39.014Z,1520661519.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:58:39.382Z,1520661519.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:58:39.779Z,1520661519.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:58:40.175Z,1520661520.175 [BPC1](FAULT): Failed to initialize
2018-03-10T05:58:40.175Z,1520661520.175 [BPC1] Communications Fault, FailCount= 4
2018-03-10T05:58:40.175Z,1520661520.175 [BPC1](ERROR): Communications Fault
2018-03-10T05:58:40.189Z,1520661520.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:58:40.300Z,1520661520.300 [CBIT](ERROR): Communications Fault in component: BPC1
2018-03-10T05:58:40.578Z,1520661520.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:58:40.982Z,1520661520.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:58:41.384Z,1520661521.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:58:41.475Z,1520661521.475 [CBIT](INFO): Clearing failed state for component BPC1
2018-03-10T05:58:41.475Z,1520661521.475 [BPC1] No Fault, FailCount= 4
2018-03-10T05:58:41.861Z,1520661521.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:58:42.187Z,1520661522.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:58:42.587Z,1520661522.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:58:42.978Z,1520661522.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:58:43.381Z,1520661523.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:58:43.782Z,1520661523.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:58:44.177Z,1520661524.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:58:44.590Z,1520661524.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:58:45.010Z,1520661525.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:58:45.381Z,1520661525.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:58:45.781Z,1520661525.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:58:46.183Z,1520661526.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:58:46.578Z,1520661526.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:58:46.982Z,1520661526.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:58:47.381Z,1520661527.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:58:50.491Z,1520661530.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:58:50.676Z,1520661530.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:58:51.075Z,1520661531.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:58:51.467Z,1520661531.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:58:51.869Z,1520661531.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:58:52.273Z,1520661532.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:58:52.674Z,1520661532.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:58:53.078Z,1520661533.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:58:53.479Z,1520661533.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:58:53.866Z,1520661533.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:58:54.262Z,1520661534.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:58:54.668Z,1520661534.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:58:55.069Z,1520661535.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:58:55.475Z,1520661535.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:58:55.881Z,1520661535.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:58:56.275Z,1520661536.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:58:56.673Z,1520661536.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:58:57.073Z,1520661537.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:58:57.462Z,1520661537.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:58:57.871Z,1520661537.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:58:58.273Z,1520661538.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:58:58.674Z,1520661538.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:58:59.074Z,1520661539.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:58:59.479Z,1520661539.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:58:59.867Z,1520661539.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:59:00.264Z,1520661540.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:59:00.665Z,1520661540.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:59:01.069Z,1520661541.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:59:01.475Z,1520661541.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:59:01.881Z,1520661541.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:59:02.271Z,1520661542.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:59:02.667Z,1520661542.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:59:03.068Z,1520661543.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:59:03.466Z,1520661543.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:59:03.867Z,1520661543.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:59:04.268Z,1520661544.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:59:04.677Z,1520661544.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:59:05.120Z,1520661545.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:59:05.470Z,1520661545.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:59:05.869Z,1520661545.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:59:06.263Z,1520661546.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:59:06.666Z,1520661546.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:59:07.073Z,1520661547.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:59:07.424Z,1520661547.424 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-03-10T05:59:07.424Z,1520661547.424 [NAL9602] Data Fault, FailCount= 5
2018-03-10T05:59:07.424Z,1520661547.424 [NAL9602](ERROR): Data Fault
2018-03-10T05:59:07.484Z,1520661547.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:59:07.571Z,1520661547.571 [CBIT](ERROR): Data Fault in component: NAL9602
2018-03-10T05:59:07.571Z,1520661547.571 [CBIT](CRITICAL): Data Fault in component: NAL9602
2018-03-10T05:59:07.824Z,1520661547.824 [NAL9602](INFO): Powering down
2018-03-10T05:59:07.880Z,1520661547.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:59:07.961Z,1520661547.961 [CommandLine](FAULT): Scheduling is paused
2018-03-10T05:59:07.961Z,1520661547.961 [CBIT](INFO): Critical error at 20180310T055907
2018-03-10T05:59:07.962Z,1520661547.962 [Supervisor](INFO): Stop Mission called by CBIT::checkCriticals
2018-03-10T05:59:08.265Z,1520661548.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:59:08.667Z,1520661548.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:59:09.064Z,1520661549.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:59:09.468Z,1520661549.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:59:09.869Z,1520661549.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:59:10.290Z,1520661550.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:59:10.684Z,1520661550.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:59:11.071Z,1520661551.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:59:11.453Z,1520661551.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:59:11.870Z,1520661551.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:59:12.270Z,1520661552.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:59:12.673Z,1520661552.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:59:13.053Z,1520661553.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:59:13.474Z,1520661553.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:59:13.874Z,1520661553.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:59:14.254Z,1520661554.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:59:14.673Z,1520661554.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:59:15.073Z,1520661555.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:59:15.471Z,1520661555.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:59:15.873Z,1520661555.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:59:16.281Z,1520661556.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:59:16.675Z,1520661556.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:59:17.055Z,1520661557.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:59:17.489Z,1520661557.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:59:17.885Z,1520661557.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:59:18.265Z,1520661558.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:59:18.665Z,1520661558.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:59:19.057Z,1520661559.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:59:19.461Z,1520661559.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:59:19.865Z,1520661559.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:59:20.259Z,1520661560.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:59:20.657Z,1520661560.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:59:21.060Z,1520661561.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:59:21.462Z,1520661561.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:59:21.892Z,1520661561.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:59:22.255Z,1520661562.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:59:22.657Z,1520661562.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:59:23.061Z,1520661563.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:59:23.465Z,1520661563.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:59:23.864Z,1520661563.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:59:24.262Z,1520661564.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:59:24.665Z,1520661564.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:59:25.069Z,1520661565.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:59:25.462Z,1520661565.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:59:25.862Z,1520661565.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:59:26.262Z,1520661566.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:59:26.669Z,1520661566.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:59:27.062Z,1520661567.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:59:27.469Z,1520661567.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:59:27.866Z,1520661567.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:59:28.265Z,1520661568.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:59:28.682Z,1520661568.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:59:29.062Z,1520661569.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:59:29.476Z,1520661569.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:59:29.885Z,1520661569.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:59:30.262Z,1520661570.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:59:30.665Z,1520661570.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:59:31.062Z,1520661571.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:59:31.469Z,1520661571.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:59:31.865Z,1520661571.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:59:32.262Z,1520661572.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:59:32.666Z,1520661572.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:59:33.067Z,1520661573.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:59:33.485Z,1520661573.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:59:33.866Z,1520661573.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:59:34.264Z,1520661574.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:59:34.666Z,1520661574.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:59:35.066Z,1520661575.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:59:35.464Z,1520661575.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:59:35.867Z,1520661575.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:59:36.264Z,1520661576.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:59:36.668Z,1520661576.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:59:37.069Z,1520661577.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:59:37.454Z,1520661577.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:59:37.876Z,1520661577.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:59:38.273Z,1520661578.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:59:38.652Z,1520661578.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:59:39.056Z,1520661579.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:59:39.457Z,1520661579.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:59:39.858Z,1520661579.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:59:40.281Z,1520661580.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:59:40.677Z,1520661580.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:59:41.081Z,1520661581.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:59:41.456Z,1520661581.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:59:41.860Z,1520661581.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:59:42.281Z,1520661582.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:59:42.665Z,1520661582.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:59:43.065Z,1520661583.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:59:43.461Z,1520661583.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:59:43.861Z,1520661583.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:59:44.269Z,1520661584.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:59:44.660Z,1520661584.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:59:45.066Z,1520661585.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:59:45.481Z,1520661585.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:59:45.869Z,1520661585.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:59:46.306Z,1520661586.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:59:46.701Z,1520661586.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:59:47.078Z,1520661587.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:59:47.473Z,1520661587.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:59:47.879Z,1520661587.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:59:48.281Z,1520661588.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:59:48.672Z,1520661588.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:59:52.523Z,1520661592.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:59:52.665Z,1520661592.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:59:53.071Z,1520661593.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:59:53.465Z,1520661593.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:59:53.873Z,1520661593.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:59:54.276Z,1520661594.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:59:54.676Z,1520661594.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:59:55.089Z,1520661595.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:59:55.470Z,1520661595.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:59:55.869Z,1520661595.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:59:56.277Z,1520661596.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:59:56.685Z,1520661596.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:59:57.074Z,1520661597.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:59:57.458Z,1520661597.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:59:57.882Z,1520661597.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:59:58.257Z,1520661598.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:59:58.677Z,1520661598.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:59:59.086Z,1520661599.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:59:59.450Z,1520661599.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T05:59:59.857Z,1520661599.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:00:00.287Z,1520661600.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:00:00.652Z,1520661600.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:00:01.057Z,1520661601.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:00:01.481Z,1520661601.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:00:01.861Z,1520661601.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:00:02.260Z,1520661602.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:00:02.661Z,1520661602.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:00:03.060Z,1520661603.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:00:03.462Z,1520661603.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:00:03.869Z,1520661603.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:00:04.265Z,1520661604.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:00:04.661Z,1520661604.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:00:05.143Z,1520661605.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:00:05.461Z,1520661605.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:00:05.861Z,1520661605.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:00:06.274Z,1520661606.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:00:06.670Z,1520661606.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:00:07.127Z,1520661607.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:00:07.497Z,1520661607.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:00:07.889Z,1520661607.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:00:08.270Z,1520661608.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:00:08.672Z,1520661608.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:00:09.081Z,1520661609.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:00:09.457Z,1520661609.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:00:09.858Z,1520661609.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:00:10.258Z,1520661610.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:00:10.681Z,1520661610.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:00:11.085Z,1520661611.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:00:11.461Z,1520661611.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:00:11.862Z,1520661611.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:00:12.264Z,1520661612.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:00:12.660Z,1520661612.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:00:13.063Z,1520661613.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:00:13.464Z,1520661613.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:00:13.857Z,1520661613.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:00:14.263Z,1520661614.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:00:14.664Z,1520661614.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:00:15.061Z,1520661615.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:00:15.462Z,1520661615.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:00:15.885Z,1520661615.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:00:16.261Z,1520661616.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:00:16.659Z,1520661616.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:00:17.065Z,1520661617.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:00:17.460Z,1520661617.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:00:17.862Z,1520661617.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:00:18.265Z,1520661618.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:00:18.669Z,1520661618.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:00:19.108Z,1520661619.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:00:19.494Z,1520661619.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:00:19.865Z,1520661619.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:00:20.265Z,1520661620.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:00:20.665Z,1520661620.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:00:21.064Z,1520661621.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:00:21.465Z,1520661621.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:00:21.865Z,1520661621.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:00:22.265Z,1520661622.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:00:22.665Z,1520661622.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:00:23.064Z,1520661623.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:00:23.464Z,1520661623.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:00:23.869Z,1520661623.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:00:24.264Z,1520661624.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:00:24.665Z,1520661624.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:00:25.070Z,1520661625.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:00:25.473Z,1520661625.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:00:25.868Z,1520661625.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:00:26.273Z,1520661626.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:00:26.664Z,1520661626.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:00:27.066Z,1520661627.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:00:27.473Z,1520661627.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:00:27.866Z,1520661627.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:00:28.266Z,1520661628.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:00:28.666Z,1520661628.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:00:29.067Z,1520661629.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:00:29.468Z,1520661629.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:00:29.866Z,1520661629.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:00:30.268Z,1520661630.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:00:30.685Z,1520661630.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:00:31.066Z,1520661631.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:00:31.468Z,1520661631.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:00:31.867Z,1520661631.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:00:32.273Z,1520661632.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:00:32.667Z,1520661632.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:00:33.063Z,1520661633.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:00:33.468Z,1520661633.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:00:33.867Z,1520661633.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:00:34.262Z,1520661634.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:00:34.666Z,1520661634.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:00:35.069Z,1520661635.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:00:35.468Z,1520661635.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:00:35.873Z,1520661635.873 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:00:35.874Z,1520661635.874 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 15
2018-03-10T06:00:35.874Z,1520661635.874 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-03-10T06:00:35.876Z,1520661635.876 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:00:35.876Z,1520661635.876 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 15
2018-03-10T06:00:35.876Z,1520661635.876 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-03-10T06:00:35.877Z,1520661635.877 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:00:35.877Z,1520661635.877 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 15
2018-03-10T06:00:35.878Z,1520661635.878 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-10T06:00:35.951Z,1520661635.951 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-03-10T06:00:35.951Z,1520661635.951 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-03-10T06:00:35.952Z,1520661635.952 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-10T06:00:36.362Z,1520661636.362 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-03-10T06:00:36.362Z,1520661636.362 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 15
2018-03-10T06:00:36.363Z,1520661636.363 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-03-10T06:00:36.363Z,1520661636.363 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 15
2018-03-10T06:00:36.364Z,1520661636.364 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-10T06:00:36.364Z,1520661636.364 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 15
2018-03-10T06:00:36.658Z,1520661636.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-03-10T06:00:36.658Z,1520661636.658 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-03-10T06:00:36.658Z,1520661636.658 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-03-10T06:00:36.675Z,1520661636.675 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-03-10T06:00:36.675Z,1520661636.675 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-03-10T06:00:36.676Z,1520661636.676 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-03-10T06:00:36.676Z,1520661636.676 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-10T06:00:36.676Z,1520661636.676 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-10T06:00:36.677Z,1520661636.677 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-10T06:00:37.061Z,1520661637.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-03-10T06:00:37.062Z,1520661637.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:00:37.455Z,1520661637.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-03-10T06:00:37.456Z,1520661637.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:00:37.860Z,1520661637.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-03-10T06:00:37.861Z,1520661637.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:00:38.258Z,1520661638.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-03-10T06:00:38.259Z,1520661638.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:00:38.663Z,1520661638.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-03-10T06:00:38.664Z,1520661638.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:00:39.061Z,1520661639.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-03-10T06:00:39.061Z,1520661639.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:00:39.460Z,1520661639.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-03-10T06:00:39.461Z,1520661639.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:00:39.860Z,1520661639.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-03-10T06:00:39.861Z,1520661639.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:00:40.262Z,1520661640.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-03-10T06:00:40.263Z,1520661640.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:00:40.657Z,1520661640.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-03-10T06:00:40.658Z,1520661640.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:00:41.056Z,1520661641.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-03-10T06:00:41.057Z,1520661641.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:00:41.460Z,1520661641.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-03-10T06:00:41.461Z,1520661641.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:00:41.879Z,1520661641.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-03-10T06:00:41.880Z,1520661641.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:00:42.285Z,1520661642.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-03-10T06:00:42.285Z,1520661642.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:00:42.661Z,1520661642.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-03-10T06:00:42.662Z,1520661642.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:00:43.068Z,1520661643.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-03-10T06:00:43.069Z,1520661643.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:00:43.460Z,1520661643.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-03-10T06:00:43.461Z,1520661643.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:00:43.861Z,1520661643.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-03-10T06:00:43.862Z,1520661643.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:00:44.260Z,1520661644.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-03-10T06:00:44.261Z,1520661644.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:00:44.659Z,1520661644.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-03-10T06:00:44.660Z,1520661644.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:00:45.062Z,1520661645.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-03-10T06:00:45.063Z,1520661645.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:00:45.460Z,1520661645.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-03-10T06:00:45.461Z,1520661645.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:00:45.864Z,1520661645.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-03-10T06:00:45.865Z,1520661645.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:00:46.260Z,1520661646.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-03-10T06:00:46.261Z,1520661646.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:00:46.666Z,1520661646.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-03-10T06:00:46.667Z,1520661646.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:00:47.073Z,1520661647.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-03-10T06:00:47.074Z,1520661647.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:00:47.098Z,1520661647.098 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-03-10T06:00:47.098Z,1520661647.098 [Default:CheckIn:C.Wait] Stopped
2018-03-10T06:00:47.098Z,1520661647.098 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-03-10T06:00:47.098Z,1520661647.098 [Default:CheckIn:D] Running Loop=1
2018-03-10T06:00:47.462Z,1520661647.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-03-10T06:00:47.463Z,1520661647.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:00:47.466Z,1520661647.466 [Default:CheckIn:D] Stopped
2018-03-10T06:00:47.467Z,1520661647.467 [Default:CheckIn:E] Running Loop=1
2018-03-10T06:00:50.594Z,1520661650.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.7 s old, using for 20.0 s.
2018-03-10T06:00:50.595Z,1520661650.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:00:50.602Z,1520661650.602 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 41.492428 min 
2018-03-10T06:00:50.602Z,1520661650.602 [Default:CheckIn:E] Stopped
2018-03-10T06:00:50.603Z,1520661650.603 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-03-10T06:00:50.603Z,1520661650.603 [Default:CheckIn] Stopped
2018-03-10T06:00:50.603Z,1520661650.603 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-03-10T06:00:50.603Z,1520661650.603 [Default:CheckIn](INFO): Running loop #5
2018-03-10T06:00:50.604Z,1520661650.604 [Default:CheckIn] Running Loop=5
2018-03-10T06:00:50.604Z,1520661650.604 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-03-10T06:00:50.604Z,1520661650.604 [Default:CheckIn:Read_GPS] Running Loop=1
2018-03-10T06:00:50.757Z,1520661650.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.9 s old, using for 20.0 s.
2018-03-10T06:00:50.758Z,1520661650.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:00:51.159Z,1520661651.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.3 s old, using for 20.0 s.
2018-03-10T06:00:51.160Z,1520661651.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:00:51.564Z,1520661651.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.7 s old, using for 20.0 s.
2018-03-10T06:00:51.565Z,1520661651.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:00:51.960Z,1520661651.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.1 s old, using for 20.0 s.
2018-03-10T06:00:51.961Z,1520661651.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:00:52.357Z,1520661652.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.5 s old, using for 20.0 s.
2018-03-10T06:00:52.358Z,1520661652.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:00:52.758Z,1520661652.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.9 s old, using for 20.0 s.
2018-03-10T06:00:52.759Z,1520661652.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:00:53.163Z,1520661653.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.3 s old, using for 20.0 s.
2018-03-10T06:00:53.164Z,1520661653.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:00:53.576Z,1520661653.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.7 s old, using for 20.0 s.
2018-03-10T06:00:53.577Z,1520661653.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:00:53.959Z,1520661653.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.1 s old, using for 20.0 s.
2018-03-10T06:00:53.960Z,1520661653.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:00:54.360Z,1520661654.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.5 s old, using for 20.0 s.
2018-03-10T06:00:54.361Z,1520661654.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:00:54.758Z,1520661654.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.9 s old, using for 20.0 s.
2018-03-10T06:00:54.759Z,1520661654.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:00:55.157Z,1520661655.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.3 s old, using for 20.0 s.
2018-03-10T06:00:55.157Z,1520661655.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:00:55.556Z,1520661655.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.7 s old, using for 20.0 s.
2018-03-10T06:00:55.557Z,1520661655.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:00:55.957Z,1520661655.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:00:56.365Z,1520661656.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:00:56.757Z,1520661656.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:00:57.161Z,1520661657.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:00:57.559Z,1520661657.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:00:57.963Z,1520661657.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:00:58.377Z,1520661658.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:00:58.758Z,1520661658.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:00:59.159Z,1520661659.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:00:59.558Z,1520661659.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:00:59.960Z,1520661659.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:01:00.359Z,1520661660.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:01:00.765Z,1520661660.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:01:01.164Z,1520661661.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:01:01.559Z,1520661661.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:01:01.965Z,1520661661.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:01:02.358Z,1520661662.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:01:02.758Z,1520661662.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:01:03.166Z,1520661663.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:01:03.559Z,1520661663.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:01:03.960Z,1520661663.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:01:04.365Z,1520661664.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:01:04.780Z,1520661664.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:01:05.160Z,1520661665.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:01:05.569Z,1520661665.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:01:05.961Z,1520661665.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:01:06.362Z,1520661666.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:01:06.761Z,1520661666.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:01:07.162Z,1520661667.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:01:07.563Z,1520661667.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:01:07.644Z,1520661667.644 [CBIT](INFO): Clearing failed state for component NAL9602
2018-03-10T06:01:07.644Z,1520661667.644 [NAL9602] No Fault, FailCount= 5
2018-03-10T06:01:07.917Z,1520661667.917 [NAL9602](INFO): Powering up NAL9602
2018-03-10T06:01:07.965Z,1520661667.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:01:08.361Z,1520661668.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:01:08.763Z,1520661668.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:01:09.166Z,1520661669.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:01:09.572Z,1520661669.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:01:09.968Z,1520661669.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:01:10.365Z,1520661670.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:01:10.776Z,1520661670.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:01:11.173Z,1520661671.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:01:11.550Z,1520661671.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:01:11.953Z,1520661671.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:01:12.349Z,1520661672.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:01:12.749Z,1520661672.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:01:13.149Z,1520661673.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:01:13.550Z,1520661673.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:01:13.953Z,1520661673.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:01:14.348Z,1520661674.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:01:14.772Z,1520661674.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:01:15.150Z,1520661675.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:01:15.575Z,1520661675.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:01:15.973Z,1520661675.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:01:16.353Z,1520661676.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:01:16.770Z,1520661676.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:01:17.167Z,1520661677.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:01:17.565Z,1520661677.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:01:17.949Z,1520661677.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:01:18.350Z,1520661678.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:01:18.772Z,1520661678.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:01:19.120Z,1520661679.120 [NAL9602](INFO): NAL9602 initialized
2018-03-10T06:01:19.153Z,1520661679.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:01:19.549Z,1520661679.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:01:19.996Z,1520661679.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:01:20.394Z,1520661680.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:01:20.780Z,1520661680.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:01:21.154Z,1520661681.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:01:21.554Z,1520661681.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:01:21.954Z,1520661681.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:01:22.354Z,1520661682.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:01:22.779Z,1520661682.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:01:23.166Z,1520661683.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:01:23.583Z,1520661683.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:01:23.958Z,1520661683.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:01:24.358Z,1520661684.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:01:24.765Z,1520661684.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:01:25.158Z,1520661685.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:01:25.584Z,1520661685.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:01:25.986Z,1520661685.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:01:26.363Z,1520661686.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:01:26.764Z,1520661686.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:01:27.184Z,1520661687.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:01:27.563Z,1520661687.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:01:27.962Z,1520661687.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:01:28.362Z,1520661688.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:01:28.765Z,1520661688.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:01:29.157Z,1520661689.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:01:29.563Z,1520661689.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:01:29.964Z,1520661689.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:01:30.365Z,1520661690.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:01:30.759Z,1520661690.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:01:31.165Z,1520661691.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:01:31.570Z,1520661691.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:01:32.008Z,1520661692.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:01:32.396Z,1520661692.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:01:32.758Z,1520661692.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:01:33.158Z,1520661693.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:01:33.591Z,1520661693.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:01:33.963Z,1520661693.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:01:34.363Z,1520661694.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:01:34.759Z,1520661694.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:01:35.154Z,1520661695.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:01:35.563Z,1520661695.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:01:35.992Z,1520661695.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:01:36.361Z,1520661696.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:01:36.760Z,1520661696.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:01:37.160Z,1520661697.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:01:37.563Z,1520661697.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:01:37.963Z,1520661697.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:01:38.363Z,1520661698.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:01:38.767Z,1520661698.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:01:39.192Z,1520661699.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:01:39.567Z,1520661699.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:01:39.963Z,1520661699.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:01:40.363Z,1520661700.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:01:40.765Z,1520661700.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:01:41.159Z,1520661701.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:01:41.569Z,1520661701.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:01:41.966Z,1520661701.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:01:42.362Z,1520661702.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:01:42.761Z,1520661702.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:01:43.160Z,1520661703.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:01:43.569Z,1520661703.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:01:43.996Z,1520661703.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:01:44.366Z,1520661704.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:01:44.757Z,1520661704.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:01:45.160Z,1520661705.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:01:45.566Z,1520661705.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:01:45.966Z,1520661705.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:01:46.373Z,1520661706.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:01:46.757Z,1520661706.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:01:47.205Z,1520661707.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:01:47.587Z,1520661707.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:01:51.929Z,1520661711.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:01:52.113Z,1520661712.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:01:52.477Z,1520661712.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:01:52.882Z,1520661712.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:01:53.274Z,1520661713.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:01:53.687Z,1520661713.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:01:54.087Z,1520661714.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:01:54.485Z,1520661714.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:01:54.893Z,1520661714.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:01:55.280Z,1520661715.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:01:55.676Z,1520661715.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:01:56.080Z,1520661716.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:01:56.475Z,1520661716.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:01:56.883Z,1520661716.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:01:57.282Z,1520661717.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:01:57.680Z,1520661717.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:01:58.075Z,1520661718.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:01:58.474Z,1520661718.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:01:58.875Z,1520661718.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:01:59.272Z,1520661719.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:01:59.685Z,1520661719.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:02:00.087Z,1520661720.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:02:00.484Z,1520661720.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:02:00.878Z,1520661720.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:02:01.284Z,1520661721.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:02:01.661Z,1520661721.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:02:02.089Z,1520661722.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:02:02.483Z,1520661722.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:02:02.889Z,1520661722.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:02:03.289Z,1520661723.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:02:03.689Z,1520661723.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:02:04.081Z,1520661724.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:02:04.489Z,1520661724.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:02:04.893Z,1520661724.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:02:05.266Z,1520661725.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:02:05.693Z,1520661725.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:02:06.090Z,1520661726.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:02:06.493Z,1520661726.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:02:06.865Z,1520661726.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:02:07.266Z,1520661727.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:02:07.665Z,1520661727.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:02:08.067Z,1520661728.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:02:08.472Z,1520661728.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:02:08.899Z,1520661728.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:02:09.298Z,1520661729.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:02:09.671Z,1520661729.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:02:10.070Z,1520661730.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:02:10.469Z,1520661730.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:02:10.871Z,1520661730.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:02:11.264Z,1520661731.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:02:11.675Z,1520661731.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:02:12.076Z,1520661732.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:02:12.477Z,1520661732.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:02:12.870Z,1520661732.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:02:13.269Z,1520661733.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:02:13.670Z,1520661733.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:02:14.072Z,1520661734.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:02:14.470Z,1520661734.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:02:14.898Z,1520661734.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:02:15.297Z,1520661735.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:02:15.700Z,1520661735.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:02:16.077Z,1520661736.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:02:16.470Z,1520661736.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:02:16.877Z,1520661736.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:02:17.281Z,1520661737.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:02:17.681Z,1520661737.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:02:18.106Z,1520661738.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:02:18.477Z,1520661738.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:02:18.871Z,1520661738.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:02:19.272Z,1520661739.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:02:19.677Z,1520661739.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:02:20.074Z,1520661740.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:02:20.465Z,1520661740.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:02:20.877Z,1520661740.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:02:21.278Z,1520661741.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:02:21.678Z,1520661741.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:02:22.077Z,1520661742.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:02:22.471Z,1520661742.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:02:22.873Z,1520661742.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:02:23.277Z,1520661743.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:02:23.685Z,1520661743.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:02:24.077Z,1520661744.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:02:24.478Z,1520661744.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:02:24.870Z,1520661744.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:02:25.272Z,1520661745.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:02:25.678Z,1520661745.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:02:26.072Z,1520661746.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:02:26.469Z,1520661746.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:02:26.877Z,1520661746.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:02:27.278Z,1520661747.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:02:27.685Z,1520661747.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:02:28.077Z,1520661748.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:02:28.475Z,1520661748.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:02:28.881Z,1520661748.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:02:29.325Z,1520661749.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:02:29.713Z,1520661749.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:02:30.085Z,1520661750.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:02:30.489Z,1520661750.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:02:30.876Z,1520661750.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:02:31.289Z,1520661751.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:02:31.662Z,1520661751.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:02:32.065Z,1520661752.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:02:32.462Z,1520661752.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:02:32.883Z,1520661752.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:02:33.289Z,1520661753.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:02:33.685Z,1520661753.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:02:34.070Z,1520661754.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:02:34.474Z,1520661754.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:02:34.874Z,1520661754.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:02:35.270Z,1520661755.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:02:35.683Z,1520661755.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:02:36.089Z,1520661756.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:02:36.482Z,1520661756.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:02:36.882Z,1520661756.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:02:37.278Z,1520661757.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:02:37.677Z,1520661757.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:02:38.073Z,1520661758.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:02:38.469Z,1520661758.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:02:38.882Z,1520661758.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:02:39.282Z,1520661759.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:02:39.682Z,1520661759.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:02:40.079Z,1520661760.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:02:40.493Z,1520661760.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:02:40.871Z,1520661760.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:02:41.277Z,1520661761.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:02:41.690Z,1520661761.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:02:42.114Z,1520661762.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:02:42.482Z,1520661762.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:02:42.874Z,1520661762.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:02:43.272Z,1520661763.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:02:43.669Z,1520661763.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:02:44.071Z,1520661764.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:02:44.472Z,1520661764.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:02:44.883Z,1520661764.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:02:45.283Z,1520661765.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:02:45.689Z,1520661765.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:02:46.068Z,1520661766.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:02:46.472Z,1520661766.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:02:46.877Z,1520661766.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:02:47.272Z,1520661767.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:02:47.684Z,1520661767.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:02:50.819Z,1520661770.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:02:51.001Z,1520661771.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:02:51.370Z,1520661771.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:02:51.773Z,1520661771.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:02:52.170Z,1520661772.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:02:52.589Z,1520661772.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:02:52.997Z,1520661772.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:02:53.378Z,1520661773.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:02:53.769Z,1520661773.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:02:54.177Z,1520661774.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:02:54.585Z,1520661774.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:02:54.982Z,1520661774.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:02:55.379Z,1520661775.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:02:55.775Z,1520661775.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:02:56.173Z,1520661776.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:02:56.577Z,1520661776.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:02:56.984Z,1520661776.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:02:57.381Z,1520661777.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:02:57.777Z,1520661777.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:02:58.157Z,1520661778.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:02:58.593Z,1520661778.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:02:58.997Z,1520661778.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:02:59.381Z,1520661779.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:02:59.766Z,1520661779.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:03:00.165Z,1520661780.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:03:00.596Z,1520661780.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:03:00.992Z,1520661780.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:03:01.391Z,1520661781.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:03:01.759Z,1520661781.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:03:02.162Z,1520661782.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:03:02.588Z,1520661782.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:03:02.990Z,1520661782.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:03:03.391Z,1520661783.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:03:03.762Z,1520661783.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:03:04.161Z,1520661784.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:03:04.591Z,1520661784.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:03:05.005Z,1520661785.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:03:05.392Z,1520661785.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:03:05.769Z,1520661785.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:03:06.161Z,1520661786.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:03:06.593Z,1520661786.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:03:06.998Z,1520661786.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:03:07.397Z,1520661787.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:03:07.795Z,1520661787.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:03:08.165Z,1520661788.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:03:08.601Z,1520661788.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:03:08.966Z,1520661788.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:03:09.378Z,1520661789.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:03:09.768Z,1520661789.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:03:10.161Z,1520661790.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:03:10.571Z,1520661790.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:03:10.997Z,1520661790.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:03:11.371Z,1520661791.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:03:11.766Z,1520661791.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:03:12.166Z,1520661792.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:03:12.570Z,1520661792.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:03:12.971Z,1520661792.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:03:13.372Z,1520661793.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:03:13.773Z,1520661793.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:03:14.166Z,1520661794.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:03:14.571Z,1520661794.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:03:14.974Z,1520661794.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:03:15.372Z,1520661795.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:03:15.769Z,1520661795.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:03:16.170Z,1520661796.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:03:16.575Z,1520661796.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:03:16.977Z,1520661796.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:03:17.377Z,1520661797.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:03:17.799Z,1520661797.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:03:18.166Z,1520661798.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:03:18.571Z,1520661798.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:03:18.971Z,1520661798.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:03:19.371Z,1520661799.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:03:19.775Z,1520661799.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:03:20.199Z,1520661800.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:03:20.578Z,1520661800.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:03:20.975Z,1520661800.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:03:21.379Z,1520661801.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:03:21.768Z,1520661801.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:03:22.168Z,1520661802.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:03:22.585Z,1520661802.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:03:22.979Z,1520661802.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:03:23.374Z,1520661803.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:03:23.773Z,1520661803.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:03:24.166Z,1520661804.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:03:24.570Z,1520661804.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:03:24.979Z,1520661804.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:03:25.378Z,1520661805.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:03:25.765Z,1520661805.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:03:26.166Z,1520661806.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:03:26.577Z,1520661806.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:03:26.975Z,1520661806.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:03:27.385Z,1520661807.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:03:27.770Z,1520661807.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:03:28.168Z,1520661808.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:03:28.579Z,1520661808.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:03:28.978Z,1520661808.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:03:29.386Z,1520661809.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:03:29.778Z,1520661809.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:03:30.185Z,1520661810.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:03:30.578Z,1520661810.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:03:30.978Z,1520661810.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:03:31.385Z,1520661811.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:03:31.769Z,1520661811.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:03:32.166Z,1520661812.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:03:32.585Z,1520661812.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:03:32.993Z,1520661812.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:03:33.379Z,1520661813.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:03:33.767Z,1520661813.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:03:34.168Z,1520661814.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:03:34.585Z,1520661814.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:03:34.978Z,1520661814.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:03:35.376Z,1520661815.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:03:35.768Z,1520661815.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:03:36.173Z,1520661816.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:03:36.579Z,1520661816.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:03:36.978Z,1520661816.978 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:03:36.979Z,1520661816.979 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 16
2018-03-10T06:03:36.979Z,1520661816.979 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-03-10T06:03:36.981Z,1520661816.981 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:03:36.981Z,1520661816.981 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 16
2018-03-10T06:03:36.981Z,1520661816.981 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-03-10T06:03:36.983Z,1520661816.983 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:03:36.983Z,1520661816.983 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 16
2018-03-10T06:03:36.983Z,1520661816.983 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-10T06:03:37.055Z,1520661817.055 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-03-10T06:03:37.055Z,1520661817.055 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-03-10T06:03:37.056Z,1520661817.056 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-10T06:03:37.471Z,1520661817.471 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-03-10T06:03:37.471Z,1520661817.471 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 16
2018-03-10T06:03:37.472Z,1520661817.472 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-03-10T06:03:37.472Z,1520661817.472 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 16
2018-03-10T06:03:37.472Z,1520661817.472 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-10T06:03:37.472Z,1520661817.472 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 16
2018-03-10T06:03:37.774Z,1520661817.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-03-10T06:03:37.775Z,1520661817.775 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-03-10T06:03:37.775Z,1520661817.775 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-03-10T06:03:37.776Z,1520661817.776 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-03-10T06:03:37.776Z,1520661817.776 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-03-10T06:03:37.776Z,1520661817.776 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-03-10T06:03:37.777Z,1520661817.777 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-10T06:03:37.777Z,1520661817.777 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-10T06:03:37.777Z,1520661817.777 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-10T06:03:38.176Z,1520661818.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-03-10T06:03:38.176Z,1520661818.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:03:38.580Z,1520661818.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-03-10T06:03:38.581Z,1520661818.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:03:38.984Z,1520661818.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-03-10T06:03:38.986Z,1520661818.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:03:39.384Z,1520661819.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-03-10T06:03:39.385Z,1520661819.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:03:39.777Z,1520661819.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-03-10T06:03:39.778Z,1520661819.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:03:40.158Z,1520661820.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-03-10T06:03:40.159Z,1520661820.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:03:40.583Z,1520661820.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-03-10T06:03:40.585Z,1520661820.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:03:40.986Z,1520661820.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-03-10T06:03:40.987Z,1520661820.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:03:41.385Z,1520661821.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-03-10T06:03:41.386Z,1520661821.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:03:41.759Z,1520661821.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-03-10T06:03:41.760Z,1520661821.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:03:42.164Z,1520661822.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-03-10T06:03:42.165Z,1520661822.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:03:42.589Z,1520661822.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-03-10T06:03:42.590Z,1520661822.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:03:42.987Z,1520661822.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-03-10T06:03:42.988Z,1520661822.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:03:43.391Z,1520661823.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-03-10T06:03:43.392Z,1520661823.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:03:43.764Z,1520661823.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-03-10T06:03:43.765Z,1520661823.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:03:44.161Z,1520661824.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-03-10T06:03:44.162Z,1520661824.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:03:44.594Z,1520661824.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-03-10T06:03:44.595Z,1520661824.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:03:45.007Z,1520661825.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-03-10T06:03:45.008Z,1520661825.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:03:45.404Z,1520661825.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-03-10T06:03:45.405Z,1520661825.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:03:45.765Z,1520661825.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-03-10T06:03:45.766Z,1520661825.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:03:46.166Z,1520661826.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-03-10T06:03:46.167Z,1520661826.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:03:46.570Z,1520661826.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-03-10T06:03:46.571Z,1520661826.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:03:47.014Z,1520661827.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-03-10T06:03:47.019Z,1520661827.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:03:47.376Z,1520661827.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-03-10T06:03:47.377Z,1520661827.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:03:47.783Z,1520661827.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-03-10T06:03:47.784Z,1520661827.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:03:51.783Z,1520661831.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-03-10T06:03:51.784Z,1520661831.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:03:51.950Z,1520661831.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.0 s old, using for 20.0 s.
2018-03-10T06:03:51.951Z,1520661831.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:03:52.353Z,1520661832.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.4 s old, using for 20.0 s.
2018-03-10T06:03:52.354Z,1520661832.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:03:52.747Z,1520661832.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.8 s old, using for 20.0 s.
2018-03-10T06:03:52.748Z,1520661832.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:03:53.133Z,1520661833.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.2 s old, using for 20.0 s.
2018-03-10T06:03:53.134Z,1520661833.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:03:53.537Z,1520661833.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.6 s old, using for 20.0 s.
2018-03-10T06:03:53.538Z,1520661833.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:03:53.936Z,1520661833.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.0 s old, using for 20.0 s.
2018-03-10T06:03:53.936Z,1520661833.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:03:54.341Z,1520661834.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.4 s old, using for 20.0 s.
2018-03-10T06:03:54.342Z,1520661834.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:03:54.768Z,1520661834.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.8 s old, using for 20.0 s.
2018-03-10T06:03:54.769Z,1520661834.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:03:55.141Z,1520661835.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.2 s old, using for 20.0 s.
2018-03-10T06:03:55.142Z,1520661835.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:03:55.548Z,1520661835.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.6 s old, using for 20.0 s.
2018-03-10T06:03:55.549Z,1520661835.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:03:55.938Z,1520661835.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.0 s old, using for 20.0 s.
2018-03-10T06:03:55.939Z,1520661835.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:03:56.328Z,1520661836.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.4 s old, using for 20.0 s.
2018-03-10T06:03:56.329Z,1520661836.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:03:56.726Z,1520661836.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.7 s old, using for 20.0 s.
2018-03-10T06:03:56.727Z,1520661836.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:03:57.132Z,1520661837.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:03:57.568Z,1520661837.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:03:57.955Z,1520661837.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:03:58.335Z,1520661838.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:03:58.730Z,1520661838.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:03:59.130Z,1520661839.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:03:59.536Z,1520661839.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:03:59.957Z,1520661839.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:04:00.335Z,1520661840.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:04:00.730Z,1520661840.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:04:01.125Z,1520661841.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:04:01.556Z,1520661841.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:04:01.958Z,1520661841.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:04:02.335Z,1520661842.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:04:02.730Z,1520661842.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:04:03.131Z,1520661843.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:04:03.558Z,1520661843.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:04:03.935Z,1520661843.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:04:04.336Z,1520661844.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:04:04.730Z,1520661844.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:04:05.130Z,1520661845.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:04:05.535Z,1520661845.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:04:05.957Z,1520661845.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:04:06.336Z,1520661846.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:04:06.737Z,1520661846.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:04:07.157Z,1520661847.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:04:07.535Z,1520661847.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:04:07.942Z,1520661847.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:04:08.337Z,1520661848.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:04:08.730Z,1520661848.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:04:09.131Z,1520661849.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:04:09.537Z,1520661849.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:04:09.968Z,1520661849.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:04:10.341Z,1520661850.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:04:10.733Z,1520661850.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:04:11.133Z,1520661851.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:04:11.539Z,1520661851.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:04:11.939Z,1520661851.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:04:12.335Z,1520661852.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:04:12.731Z,1520661852.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:04:13.135Z,1520661853.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:04:13.526Z,1520661853.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:04:13.941Z,1520661853.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:04:14.334Z,1520661854.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:04:14.736Z,1520661854.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:04:15.131Z,1520661855.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:04:15.531Z,1520661855.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:04:15.955Z,1520661855.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:04:16.329Z,1520661856.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:04:16.736Z,1520661856.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:04:17.135Z,1520661857.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:04:17.534Z,1520661857.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:04:17.936Z,1520661857.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:04:18.321Z,1520661858.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:04:18.723Z,1520661858.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:04:19.131Z,1520661859.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:04:19.553Z,1520661859.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:04:19.938Z,1520661859.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:04:20.341Z,1520661860.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:04:20.737Z,1520661860.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:04:21.132Z,1520661861.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:04:21.543Z,1520661861.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:04:21.953Z,1520661861.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:04:22.361Z,1520661862.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:04:22.741Z,1520661862.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:04:23.133Z,1520661863.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:04:23.543Z,1520661863.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:04:23.949Z,1520661863.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:04:24.342Z,1520661864.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:04:24.733Z,1520661864.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:04:25.135Z,1520661865.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:04:25.539Z,1520661865.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:04:25.943Z,1520661865.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:04:26.343Z,1520661866.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:04:26.734Z,1520661866.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:04:27.134Z,1520661867.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:04:27.549Z,1520661867.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:04:27.946Z,1520661867.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:04:28.344Z,1520661868.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:04:28.733Z,1520661868.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:04:29.133Z,1520661869.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:04:29.545Z,1520661869.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:04:29.946Z,1520661869.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:04:30.343Z,1520661870.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:04:30.733Z,1520661870.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:04:31.137Z,1520661871.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:04:31.550Z,1520661871.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:04:31.965Z,1520661871.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:04:32.343Z,1520661872.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:04:32.733Z,1520661872.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:04:33.137Z,1520661873.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:04:33.549Z,1520661873.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:04:33.947Z,1520661873.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:04:34.351Z,1520661874.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:04:34.742Z,1520661874.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:04:35.144Z,1520661875.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:04:35.546Z,1520661875.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:04:35.946Z,1520661875.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:04:36.346Z,1520661876.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:04:36.723Z,1520661876.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:04:37.123Z,1520661877.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:04:37.543Z,1520661877.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:04:37.949Z,1520661877.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:04:38.344Z,1520661878.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:04:38.721Z,1520661878.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:04:39.124Z,1520661879.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:04:39.521Z,1520661879.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:04:39.942Z,1520661879.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:04:40.343Z,1520661880.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:04:40.743Z,1520661880.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:04:41.121Z,1520661881.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:04:41.522Z,1520661881.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:04:41.924Z,1520661881.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:04:42.345Z,1520661882.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:04:42.749Z,1520661882.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:04:43.149Z,1520661883.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:04:43.546Z,1520661883.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:04:43.923Z,1520661883.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:04:44.345Z,1520661884.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:04:44.760Z,1520661884.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:04:45.129Z,1520661885.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:04:45.550Z,1520661885.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:04:45.949Z,1520661885.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:04:46.348Z,1520661886.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:04:46.727Z,1520661886.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:04:47.128Z,1520661887.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:04:47.573Z,1520661887.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:04:47.951Z,1520661887.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:04:51.058Z,1520661891.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:04:51.208Z,1520661891.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:04:51.608Z,1520661891.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:04:52.008Z,1520661892.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:04:52.408Z,1520661892.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:04:52.821Z,1520661892.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:04:53.221Z,1520661893.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:04:53.621Z,1520661893.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:04:54.014Z,1520661894.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:04:54.409Z,1520661894.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:04:54.806Z,1520661894.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:04:55.209Z,1520661895.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:04:55.625Z,1520661895.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:04:56.020Z,1520661896.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:04:56.421Z,1520661896.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:04:56.816Z,1520661896.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:04:57.219Z,1520661897.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:04:57.612Z,1520661897.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:04:58.013Z,1520661898.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:04:58.412Z,1520661898.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:04:58.818Z,1520661898.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:04:59.222Z,1520661899.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:04:59.637Z,1520661899.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:05:00.024Z,1520661900.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:05:00.391Z,1520661900.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:05:00.810Z,1520661900.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:05:01.193Z,1520661901.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:05:01.625Z,1520661901.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:05:02.016Z,1520661902.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:05:02.425Z,1520661902.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:05:02.797Z,1520661902.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:05:03.225Z,1520661903.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:05:03.598Z,1520661903.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:05:03.994Z,1520661903.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:05:04.398Z,1520661904.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:05:04.821Z,1520661904.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:05:05.222Z,1520661905.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:05:05.626Z,1520661905.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:05:05.998Z,1520661905.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:05:06.401Z,1520661906.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:05:06.801Z,1520661906.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:05:07.194Z,1520661907.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:05:07.627Z,1520661907.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:05:08.029Z,1520661908.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:05:08.427Z,1520661908.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:05:08.808Z,1520661908.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:05:09.235Z,1520661909.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:05:09.602Z,1520661909.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:05:10.005Z,1520661910.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:05:10.402Z,1520661910.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:05:10.808Z,1520661910.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:05:11.211Z,1520661911.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:05:11.607Z,1520661911.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:05:12.002Z,1520661912.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:05:12.406Z,1520661912.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:05:12.821Z,1520661912.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:05:13.204Z,1520661913.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:05:13.610Z,1520661913.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:05:14.011Z,1520661914.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:05:14.410Z,1520661914.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:05:14.798Z,1520661914.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:05:15.212Z,1520661915.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:05:15.613Z,1520661915.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:05:16.009Z,1520661916.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:05:16.407Z,1520661916.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:05:16.816Z,1520661916.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:05:17.213Z,1520661917.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:05:17.615Z,1520661917.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:05:18.007Z,1520661918.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:05:18.408Z,1520661918.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:05:18.805Z,1520661918.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:05:19.206Z,1520661919.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:05:19.617Z,1520661919.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:05:20.033Z,1520661920.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:05:20.417Z,1520661920.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:05:20.813Z,1520661920.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:05:21.225Z,1520661921.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:05:21.632Z,1520661921.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:05:21.998Z,1520661921.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:05:22.394Z,1520661922.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:05:22.821Z,1520661922.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:05:23.227Z,1520661923.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:05:23.626Z,1520661923.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:05:24.005Z,1520661924.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:05:24.393Z,1520661924.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:05:24.800Z,1520661924.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:05:24.895Z,1520661924.895 [CBIT](DEBUG): EFC running - data check-sum false
2018-03-10T06:05:25.204Z,1520661925.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:05:25.633Z,1520661925.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:05:26.027Z,1520661926.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:05:26.432Z,1520661926.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:05:26.802Z,1520661926.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:05:27.202Z,1520661927.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:05:27.602Z,1520661927.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:05:28.005Z,1520661928.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:05:28.402Z,1520661928.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:05:28.808Z,1520661928.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:05:29.211Z,1520661929.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:05:29.607Z,1520661929.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:05:30.002Z,1520661930.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:05:30.404Z,1520661930.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:05:30.803Z,1520661930.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:05:31.203Z,1520661931.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:05:31.613Z,1520661931.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:05:32.007Z,1520661932.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:05:32.407Z,1520661932.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:05:32.804Z,1520661932.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:05:33.202Z,1520661933.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:05:33.611Z,1520661933.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:05:34.039Z,1520661934.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:05:34.403Z,1520661934.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:05:34.811Z,1520661934.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:05:35.210Z,1520661935.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:05:35.617Z,1520661935.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:05:36.003Z,1520661936.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:05:36.406Z,1520661936.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:05:36.804Z,1520661936.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:05:37.202Z,1520661937.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:05:37.612Z,1520661937.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:05:38.018Z,1520661938.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:05:38.443Z,1520661938.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:05:38.806Z,1520661938.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:05:39.206Z,1520661939.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:05:39.604Z,1520661939.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:05:40.008Z,1520661940.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:05:40.402Z,1520661940.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:05:40.815Z,1520661940.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:05:41.217Z,1520661941.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:05:41.616Z,1520661941.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:05:42.005Z,1520661942.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:05:42.408Z,1520661942.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:05:42.808Z,1520661942.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:05:43.205Z,1520661943.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:05:43.616Z,1520661943.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:05:44.015Z,1520661944.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:05:44.415Z,1520661944.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:05:44.808Z,1520661944.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:05:45.205Z,1520661945.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:05:45.607Z,1520661945.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:05:46.054Z,1520661946.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:05:46.432Z,1520661946.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:05:46.834Z,1520661946.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:05:47.228Z,1520661947.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:05:47.622Z,1520661947.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:05:48.040Z,1520661948.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:05:51.889Z,1520661951.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:05:51.892Z,1520661951.892 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-03-10T06:00:50.6Z
2018-03-10T06:05:51.892Z,1520661951.892 [Default:CheckIn:Read_GPS] Stopped
2018-03-10T06:05:51.892Z,1520661951.892 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-03-10T06:05:52.061Z,1520661952.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:05:52.569Z,1520661952.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:05:52.849Z,1520661952.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:05:53.241Z,1520661953.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:05:53.644Z,1520661953.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:05:56.744Z,1520661956.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:05:56.900Z,1520661956.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:05:57.243Z,1520661957.243 [DataOverHttps](INFO): Sending 92 bytes from file Logs/20180310T051512/Courier0020.lzma
2018-03-10T06:05:57.304Z,1520661957.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:05:57.697Z,1520661957.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:05:58.045Z,1520661958.045 [DataOverHttps](INFO): Moved sent file to Logs/20180310T051512/Courier0020.lzma.bak
2018-03-10T06:05:58.045Z,1520661958.045 [DataOverHttps](INFO): SBD MOMSN=8002115
2018-03-10T06:05:58.129Z,1520661958.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:05:58.765Z,1520661958.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:05:58.894Z,1520661958.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:05:59.310Z,1520661959.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:06:02.452Z,1520661962.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:06:02.611Z,1520661962.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:06:03.007Z,1520661963.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:06:03.426Z,1520661963.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:06:03.805Z,1520661963.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:06:04.211Z,1520661964.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:06:04.645Z,1520661964.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:06:07.719Z,1520661967.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:06:07.816Z,1520661967.816 [DataOverHttps](INFO): Sending 218 bytes from file Logs/20180310T051512/Express0021.lzma
2018-03-10T06:06:07.878Z,1520661967.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:06:08.265Z,1520661968.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:06:08.617Z,1520661968.617 [DataOverHttps](INFO): Moved sent file to Logs/20180310T051512/Express0021.lzma.bak
2018-03-10T06:06:08.617Z,1520661968.617 [DataOverHttps](INFO): SBD MOMSN=8002118
2018-03-10T06:06:08.673Z,1520661968.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:06:09.318Z,1520661969.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:06:09.321Z,1520661969.321 [Default:CheckIn:Read_Iridium] Stopped
2018-03-10T06:06:09.321Z,1520661969.321 [Default:CheckIn:C.Wait] Running Loop=1
2018-03-10T06:06:09.321Z,1520661969.321 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-03-10T06:06:09.460Z,1520661969.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:06:09.873Z,1520661969.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:06:13.229Z,1520661973.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:06:13.417Z,1520661973.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:06:13.786Z,1520661973.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:06:14.183Z,1520661974.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:06:14.628Z,1520661974.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:06:15.000Z,1520661975.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:06:15.406Z,1520661975.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:06:15.781Z,1520661975.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:06:16.189Z,1520661976.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:06:16.592Z,1520661976.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:06:17.019Z,1520661977.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:06:17.386Z,1520661977.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:06:17.816Z,1520661977.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:06:18.219Z,1520661978.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:06:18.606Z,1520661978.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:06:18.999Z,1520661978.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:06:19.385Z,1520661979.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:06:19.791Z,1520661979.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:06:20.192Z,1520661980.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:06:20.600Z,1520661980.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:06:20.994Z,1520661980.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:06:21.395Z,1520661981.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:06:21.787Z,1520661981.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:06:22.196Z,1520661982.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:06:22.591Z,1520661982.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:06:22.997Z,1520661982.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:06:23.389Z,1520661983.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:06:23.801Z,1520661983.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:06:24.194Z,1520661984.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:06:24.595Z,1520661984.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:06:24.993Z,1520661984.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:06:25.401Z,1520661985.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:06:25.801Z,1520661985.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:06:26.190Z,1520661986.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:06:26.601Z,1520661986.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:06:27.001Z,1520661987.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:06:27.398Z,1520661987.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:06:27.789Z,1520661987.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:06:28.189Z,1520661988.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:06:28.599Z,1520661988.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:06:28.986Z,1520661988.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:06:29.389Z,1520661989.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:06:29.802Z,1520661989.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:06:30.203Z,1520661990.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:06:30.599Z,1520661990.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:06:30.989Z,1520661990.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:06:31.393Z,1520661991.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:06:31.798Z,1520661991.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:06:32.190Z,1520661992.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:06:32.599Z,1520661992.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:06:33.008Z,1520661993.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:06:33.404Z,1520661993.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:06:33.801Z,1520661993.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:06:34.192Z,1520661994.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:06:34.591Z,1520661994.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:06:35.001Z,1520661995.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:06:35.397Z,1520661995.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:06:35.799Z,1520661995.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:06:36.209Z,1520661996.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:06:36.606Z,1520661996.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:06:37.009Z,1520661997.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:06:37.390Z,1520661997.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:06:37.803Z,1520661997.803 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:06:37.803Z,1520661997.803 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 17
2018-03-10T06:06:37.803Z,1520661997.803 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-03-10T06:06:37.806Z,1520661997.806 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:06:37.806Z,1520661997.806 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 17
2018-03-10T06:06:37.806Z,1520661997.806 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-03-10T06:06:37.808Z,1520661997.808 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:06:37.808Z,1520661997.808 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 17
2018-03-10T06:06:37.808Z,1520661997.808 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-10T06:06:37.900Z,1520661997.900 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-03-10T06:06:37.900Z,1520661997.900 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-03-10T06:06:37.900Z,1520661997.900 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-10T06:06:38.323Z,1520661998.323 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-03-10T06:06:38.323Z,1520661998.323 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 17
2018-03-10T06:06:38.323Z,1520661998.323 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-03-10T06:06:38.323Z,1520661998.323 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 17
2018-03-10T06:06:38.324Z,1520661998.324 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-10T06:06:38.324Z,1520661998.324 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 17
2018-03-10T06:06:38.616Z,1520661998.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-03-10T06:06:38.617Z,1520661998.617 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-03-10T06:06:38.618Z,1520661998.618 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-03-10T06:06:38.618Z,1520661998.618 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-03-10T06:06:38.635Z,1520661998.635 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-03-10T06:06:38.635Z,1520661998.635 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-03-10T06:06:38.636Z,1520661998.636 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-10T06:06:38.636Z,1520661998.636 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-10T06:06:38.636Z,1520661998.636 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-10T06:06:39.002Z,1520661999.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-03-10T06:06:39.004Z,1520661999.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:06:39.413Z,1520661999.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-03-10T06:06:39.414Z,1520661999.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:06:39.799Z,1520661999.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-03-10T06:06:39.800Z,1520661999.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:06:40.194Z,1520662000.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-03-10T06:06:40.195Z,1520662000.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:06:40.595Z,1520662000.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-03-10T06:06:40.596Z,1520662000.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:06:41.005Z,1520662001.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-03-10T06:06:41.006Z,1520662001.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:06:41.398Z,1520662001.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-03-10T06:06:41.399Z,1520662001.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:06:41.806Z,1520662001.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-03-10T06:06:41.808Z,1520662001.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:06:42.198Z,1520662002.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-03-10T06:06:42.199Z,1520662002.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:06:42.607Z,1520662002.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-03-10T06:06:42.608Z,1520662002.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:06:43.001Z,1520662003.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-03-10T06:06:43.002Z,1520662003.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:06:43.393Z,1520662003.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-03-10T06:06:43.394Z,1520662003.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:06:43.792Z,1520662003.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-03-10T06:06:43.792Z,1520662003.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:06:44.200Z,1520662004.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-03-10T06:06:44.201Z,1520662004.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:06:44.603Z,1520662004.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-03-10T06:06:44.604Z,1520662004.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:06:45.006Z,1520662005.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-03-10T06:06:45.008Z,1520662005.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:06:45.409Z,1520662005.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-03-10T06:06:45.411Z,1520662005.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:06:45.793Z,1520662005.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-03-10T06:06:45.794Z,1520662005.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:06:46.204Z,1520662006.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-03-10T06:06:46.205Z,1520662006.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:06:46.589Z,1520662006.589 [BPC1](ERROR): Failed to receive battery data
2018-03-10T06:06:46.590Z,1520662006.590 [BPC1] Communications Fault, FailCount= 1
2018-03-10T06:06:46.590Z,1520662006.590 [BPC1](ERROR): Communications Fault
2018-03-10T06:06:46.597Z,1520662006.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-03-10T06:06:46.598Z,1520662006.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:06:46.675Z,1520662006.675 [CBIT](ERROR): Communications Fault in component: BPC1
2018-03-10T06:06:46.994Z,1520662006.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-03-10T06:06:46.994Z,1520662006.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:06:47.381Z,1520662007.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-03-10T06:06:47.382Z,1520662007.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:06:47.810Z,1520662007.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-03-10T06:06:47.811Z,1520662007.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:06:47.883Z,1520662007.883 [CBIT](INFO): Clearing failed state for component BPC1
2018-03-10T06:06:47.883Z,1520662007.883 [BPC1] No Fault, FailCount= 1
2018-03-10T06:06:48.264Z,1520662008.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.5 s old, using for 20.0 s.
2018-03-10T06:06:48.265Z,1520662008.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:06:48.604Z,1520662008.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-03-10T06:06:48.604Z,1520662008.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:06:48.981Z,1520662008.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-03-10T06:06:48.982Z,1520662008.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:06:49.381Z,1520662009.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-03-10T06:06:49.382Z,1520662009.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:06:49.808Z,1520662009.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-03-10T06:06:49.809Z,1520662009.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:06:50.185Z,1520662010.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-03-10T06:06:50.186Z,1520662010.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:06:50.594Z,1520662010.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-03-10T06:06:50.611Z,1520662010.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:06:51.019Z,1520662011.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-03-10T06:06:51.020Z,1520662011.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:06:51.398Z,1520662011.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-03-10T06:06:51.415Z,1520662011.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:06:51.786Z,1520662011.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-03-10T06:06:51.787Z,1520662011.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:06:52.189Z,1520662012.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-03-10T06:06:52.190Z,1520662012.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:06:52.596Z,1520662012.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-03-10T06:06:52.597Z,1520662012.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:06:52.996Z,1520662012.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-03-10T06:06:52.997Z,1520662012.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:06:53.390Z,1520662013.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-03-10T06:06:53.391Z,1520662013.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:06:53.796Z,1520662013.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-03-10T06:06:53.798Z,1520662013.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:06:54.199Z,1520662014.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-03-10T06:06:54.200Z,1520662014.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:06:54.600Z,1520662014.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-03-10T06:06:54.601Z,1520662014.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:06:54.991Z,1520662014.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-03-10T06:06:54.992Z,1520662014.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:06:55.385Z,1520662015.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-03-10T06:06:55.386Z,1520662015.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:06:55.806Z,1520662015.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-03-10T06:06:55.811Z,1520662015.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:06:56.196Z,1520662016.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2018-03-10T06:06:56.197Z,1520662016.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:06:56.599Z,1520662016.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2018-03-10T06:06:56.600Z,1520662016.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:06:56.999Z,1520662016.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2018-03-10T06:06:57.001Z,1520662017.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:06:57.403Z,1520662017.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2018-03-10T06:06:57.404Z,1520662017.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:06:57.785Z,1520662017.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 20.0 s old, using for 20.0 s.
2018-03-10T06:06:57.786Z,1520662017.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:06:58.189Z,1520662018.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:06:58.598Z,1520662018.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:06:58.999Z,1520662018.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:06:59.389Z,1520662019.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:06:59.803Z,1520662019.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:07:00.201Z,1520662020.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:07:00.607Z,1520662020.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:07:01.009Z,1520662021.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:07:01.389Z,1520662021.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:07:01.791Z,1520662021.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:07:02.200Z,1520662022.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:07:02.599Z,1520662022.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:07:03.002Z,1520662023.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:07:03.410Z,1520662023.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:07:03.788Z,1520662023.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:07:04.197Z,1520662024.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:07:04.593Z,1520662024.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:07:04.997Z,1520662024.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:07:05.399Z,1520662025.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:07:05.803Z,1520662025.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:07:06.202Z,1520662026.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:07:06.610Z,1520662026.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:07:07.003Z,1520662027.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:07:07.387Z,1520662027.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:07:07.791Z,1520662027.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:07:08.194Z,1520662028.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:07:08.606Z,1520662028.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:07:09.033Z,1520662029.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:07:09.403Z,1520662029.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:07:09.795Z,1520662029.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:07:12.903Z,1520662032.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:07:13.035Z,1520662033.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:07:13.456Z,1520662033.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:07:13.852Z,1520662033.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:07:14.252Z,1520662034.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:07:14.643Z,1520662034.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:07:15.044Z,1520662035.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:07:15.448Z,1520662035.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:07:15.852Z,1520662035.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:07:16.253Z,1520662036.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:07:16.641Z,1520662036.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:07:17.041Z,1520662037.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:07:17.448Z,1520662037.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:07:17.844Z,1520662037.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:07:18.244Z,1520662038.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:07:18.645Z,1520662038.645 [BPC1](FAULT): Failed to initialize
2018-03-10T06:07:18.645Z,1520662038.645 [BPC1] Communications Fault, FailCount= 2
2018-03-10T06:07:18.645Z,1520662038.645 [BPC1](ERROR): Communications Fault
2018-03-10T06:07:18.656Z,1520662038.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:07:18.740Z,1520662038.740 [CBIT](ERROR): Communications Fault in component: BPC1
2018-03-10T06:07:19.052Z,1520662039.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:07:19.449Z,1520662039.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:07:19.856Z,1520662039.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:07:19.935Z,1520662039.935 [CBIT](INFO): Clearing failed state for component BPC1
2018-03-10T06:07:19.935Z,1520662039.935 [BPC1] No Fault, FailCount= 2
2018-03-10T06:07:20.293Z,1520662040.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:07:20.643Z,1520662040.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:07:21.046Z,1520662041.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:07:21.441Z,1520662041.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:07:21.852Z,1520662041.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:07:22.252Z,1520662042.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:07:22.647Z,1520662042.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:07:23.048Z,1520662043.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:07:23.449Z,1520662043.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:07:23.849Z,1520662043.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:07:24.244Z,1520662044.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:07:24.654Z,1520662044.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:07:25.052Z,1520662045.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:07:25.450Z,1520662045.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:07:25.859Z,1520662045.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:07:26.229Z,1520662046.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:07:26.653Z,1520662046.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:07:27.053Z,1520662047.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:07:27.429Z,1520662047.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:07:27.847Z,1520662047.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:07:28.261Z,1520662048.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:07:28.652Z,1520662048.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:07:29.049Z,1520662049.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:07:29.450Z,1520662049.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:07:29.853Z,1520662049.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:07:30.253Z,1520662050.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:07:30.657Z,1520662050.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:07:31.057Z,1520662051.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:07:31.457Z,1520662051.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:07:31.829Z,1520662051.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:07:32.233Z,1520662052.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:07:32.656Z,1520662052.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:07:33.057Z,1520662053.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:07:33.460Z,1520662053.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:07:33.853Z,1520662053.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:07:34.258Z,1520662054.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:07:34.652Z,1520662054.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:07:35.056Z,1520662055.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:07:35.451Z,1520662055.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:07:35.837Z,1520662055.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:07:36.261Z,1520662056.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:07:36.661Z,1520662056.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:07:37.038Z,1520662057.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:07:37.459Z,1520662057.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:07:37.860Z,1520662057.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:07:38.260Z,1520662058.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:07:38.633Z,1520662058.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:07:39.032Z,1520662059.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:07:39.454Z,1520662059.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:07:39.861Z,1520662059.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:07:40.261Z,1520662060.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:07:40.658Z,1520662060.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:07:41.056Z,1520662061.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:07:41.460Z,1520662061.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:07:41.837Z,1520662061.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:07:42.257Z,1520662062.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:07:42.659Z,1520662062.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:07:43.057Z,1520662063.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:07:43.459Z,1520662063.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:07:43.832Z,1520662063.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:07:44.253Z,1520662064.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:07:44.660Z,1520662064.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:07:45.034Z,1520662065.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:07:45.436Z,1520662065.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:07:45.857Z,1520662065.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:07:46.276Z,1520662066.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:07:46.677Z,1520662066.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:07:47.066Z,1520662067.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:07:47.444Z,1520662067.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:07:47.847Z,1520662067.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:07:48.242Z,1520662068.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:07:48.647Z,1520662068.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:07:49.059Z,1520662069.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:07:49.446Z,1520662069.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:07:49.855Z,1520662069.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:07:50.263Z,1520662070.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:07:50.643Z,1520662070.643 [BPC1](FAULT): Failed to initialize
2018-03-10T06:07:50.643Z,1520662070.643 [BPC1] Communications Fault, FailCount= 3
2018-03-10T06:07:50.643Z,1520662070.643 [BPC1](ERROR): Communications Fault
2018-03-10T06:07:50.659Z,1520662070.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:07:50.739Z,1520662070.739 [CBIT](ERROR): Communications Fault in component: BPC1
2018-03-10T06:07:51.057Z,1520662071.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:07:51.428Z,1520662071.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:07:51.863Z,1520662071.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:07:51.944Z,1520662071.944 [CBIT](INFO): Clearing failed state for component BPC1
2018-03-10T06:07:51.944Z,1520662071.944 [BPC1] No Fault, FailCount= 3
2018-03-10T06:07:52.313Z,1520662072.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:07:52.653Z,1520662072.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:07:53.052Z,1520662073.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:07:53.453Z,1520662073.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:07:53.837Z,1520662073.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:07:54.232Z,1520662074.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:07:54.661Z,1520662074.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:07:55.058Z,1520662075.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:07:55.457Z,1520662075.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:07:55.837Z,1520662075.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:07:56.236Z,1520662076.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:07:56.632Z,1520662076.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:07:57.034Z,1520662077.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:07:57.445Z,1520662077.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:07:57.849Z,1520662077.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:07:58.243Z,1520662078.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:07:58.645Z,1520662078.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:07:59.045Z,1520662079.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:07:59.441Z,1520662079.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:07:59.839Z,1520662079.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:08:00.240Z,1520662080.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:08:00.649Z,1520662080.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:08:01.043Z,1520662081.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:08:01.442Z,1520662081.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:08:01.838Z,1520662081.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:08:02.236Z,1520662082.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:08:02.640Z,1520662082.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:08:03.045Z,1520662083.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:08:03.435Z,1520662083.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:08:03.846Z,1520662083.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:08:04.249Z,1520662084.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:08:04.643Z,1520662084.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:08:05.076Z,1520662085.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:08:05.440Z,1520662085.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:08:05.838Z,1520662085.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:08:06.229Z,1520662086.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:08:06.642Z,1520662086.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:08:07.037Z,1520662087.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:08:07.439Z,1520662087.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:08:07.872Z,1520662087.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:08:08.237Z,1520662088.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:08:08.629Z,1520662088.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:08:09.033Z,1520662089.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:08:09.433Z,1520662089.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:08:09.857Z,1520662089.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:08:12.942Z,1520662092.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:08:13.118Z,1520662093.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:08:13.509Z,1520662093.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:08:13.905Z,1520662093.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:08:14.297Z,1520662094.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:08:14.726Z,1520662094.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:08:15.126Z,1520662095.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:08:15.504Z,1520662095.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:08:15.897Z,1520662095.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:08:16.298Z,1520662096.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:08:16.707Z,1520662096.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:08:17.101Z,1520662097.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:08:17.502Z,1520662097.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:08:17.907Z,1520662097.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:08:18.306Z,1520662098.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:08:18.707Z,1520662098.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:08:19.098Z,1520662099.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:08:19.501Z,1520662099.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:08:19.903Z,1520662099.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:08:20.329Z,1520662100.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:08:20.707Z,1520662100.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:08:21.131Z,1520662101.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:08:21.507Z,1520662101.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:08:21.901Z,1520662101.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:08:22.302Z,1520662102.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:08:22.693Z,1520662102.693 [BPC1](FAULT): Failed to initialize
2018-03-10T06:08:22.693Z,1520662102.693 [BPC1] Communications Fault, FailCount= 4
2018-03-10T06:08:22.693Z,1520662102.693 [BPC1](ERROR): Communications Fault
2018-03-10T06:08:22.700Z,1520662102.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:08:22.779Z,1520662102.779 [CBIT](ERROR): Communications Fault in component: BPC1
2018-03-10T06:08:23.101Z,1520662103.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:08:23.501Z,1520662103.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:08:23.907Z,1520662103.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:08:23.999Z,1520662103.999 [CBIT](INFO): Clearing failed state for component BPC1
2018-03-10T06:08:23.999Z,1520662103.999 [BPC1] No Fault, FailCount= 4
2018-03-10T06:08:24.365Z,1520662104.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:08:24.706Z,1520662104.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:08:25.098Z,1520662105.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:08:25.501Z,1520662105.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:08:25.905Z,1520662105.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:08:26.297Z,1520662106.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:08:26.707Z,1520662106.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:08:27.108Z,1520662107.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:08:27.513Z,1520662107.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:08:27.901Z,1520662107.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:08:28.303Z,1520662108.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:08:28.697Z,1520662108.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:08:29.102Z,1520662109.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:08:29.501Z,1520662109.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:08:29.908Z,1520662109.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:08:30.306Z,1520662110.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:08:30.707Z,1520662110.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:08:31.097Z,1520662111.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:08:31.501Z,1520662111.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:08:31.902Z,1520662111.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:08:32.300Z,1520662112.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:08:32.706Z,1520662112.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:08:33.107Z,1520662113.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:08:33.505Z,1520662113.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:08:33.902Z,1520662113.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:08:34.303Z,1520662114.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:08:34.698Z,1520662114.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:08:35.109Z,1520662115.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:08:35.503Z,1520662115.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:08:35.907Z,1520662115.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:08:36.306Z,1520662116.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:08:36.713Z,1520662116.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:08:37.097Z,1520662117.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:08:37.503Z,1520662117.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:08:37.904Z,1520662117.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:08:38.297Z,1520662118.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:08:38.706Z,1520662118.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:08:39.106Z,1520662119.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:08:39.513Z,1520662119.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:08:39.902Z,1520662119.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:08:40.303Z,1520662120.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:08:40.699Z,1520662120.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:08:41.105Z,1520662121.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:08:41.507Z,1520662121.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:08:41.911Z,1520662121.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:08:42.310Z,1520662122.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:08:42.711Z,1520662122.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:08:43.098Z,1520662123.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:08:43.502Z,1520662123.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:08:43.903Z,1520662123.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:08:44.300Z,1520662124.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:08:44.717Z,1520662124.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:08:45.111Z,1520662125.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:08:45.541Z,1520662125.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:08:45.901Z,1520662125.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:08:46.309Z,1520662126.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:08:46.704Z,1520662126.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:08:47.103Z,1520662127.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:08:47.502Z,1520662127.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:08:47.911Z,1520662127.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:08:48.310Z,1520662128.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:08:48.709Z,1520662128.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:08:49.113Z,1520662129.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:08:49.501Z,1520662129.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:08:49.903Z,1520662129.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:08:50.309Z,1520662130.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:08:50.715Z,1520662130.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:08:51.125Z,1520662131.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:08:51.510Z,1520662131.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:08:51.902Z,1520662131.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:08:52.302Z,1520662132.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:08:52.705Z,1520662132.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:08:53.104Z,1520662133.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:08:53.505Z,1520662133.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:08:53.917Z,1520662133.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:08:54.314Z,1520662134.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:08:54.720Z,1520662134.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:08:55.108Z,1520662135.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:08:55.504Z,1520662135.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:08:55.907Z,1520662135.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:08:56.305Z,1520662136.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:08:56.721Z,1520662136.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:08:57.120Z,1520662137.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:08:57.514Z,1520662137.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:08:57.910Z,1520662137.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:08:58.309Z,1520662138.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:08:58.704Z,1520662138.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:08:59.104Z,1520662139.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:08:59.504Z,1520662139.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:08:59.915Z,1520662139.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:09:00.314Z,1520662140.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:09:00.711Z,1520662140.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:09:01.103Z,1520662141.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:09:01.503Z,1520662141.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:09:01.903Z,1520662141.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:09:02.309Z,1520662142.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:09:02.750Z,1520662142.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:09:03.114Z,1520662143.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:09:03.515Z,1520662143.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:09:03.906Z,1520662143.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:09:04.302Z,1520662144.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:09:04.704Z,1520662144.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:09:05.104Z,1520662145.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:09:05.502Z,1520662145.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:09:05.915Z,1520662145.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:09:06.315Z,1520662146.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:09:06.715Z,1520662146.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:09:07.103Z,1520662147.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:09:07.505Z,1520662147.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:09:07.904Z,1520662147.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:09:08.303Z,1520662148.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:09:08.712Z,1520662148.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:09:09.119Z,1520662149.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:09:09.516Z,1520662149.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:09:09.916Z,1520662149.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:09:10.312Z,1520662150.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:09:10.705Z,1520662150.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:09:11.104Z,1520662151.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:09:14.234Z,1520662154.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:09:14.421Z,1520662154.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:09:14.809Z,1520662154.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:09:15.207Z,1520662155.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:09:15.582Z,1520662155.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:09:15.982Z,1520662155.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:09:16.381Z,1520662156.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:09:16.788Z,1520662156.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:09:17.187Z,1520662157.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:09:17.589Z,1520662157.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:09:17.981Z,1520662157.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:09:18.382Z,1520662158.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:09:18.782Z,1520662158.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:09:19.185Z,1520662159.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:09:19.587Z,1520662159.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:09:20.009Z,1520662160.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:09:20.388Z,1520662160.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:09:20.781Z,1520662160.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:09:21.184Z,1520662161.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:09:21.588Z,1520662161.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:09:21.987Z,1520662161.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:09:22.394Z,1520662162.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:09:22.815Z,1520662162.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:09:23.181Z,1520662163.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:09:23.584Z,1520662163.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:09:23.984Z,1520662163.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:09:24.378Z,1520662164.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:09:24.791Z,1520662164.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:09:25.197Z,1520662165.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:09:25.617Z,1520662165.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:09:25.989Z,1520662165.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:09:26.382Z,1520662166.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:09:26.786Z,1520662166.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:09:27.185Z,1520662167.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:09:27.587Z,1520662167.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:09:27.997Z,1520662167.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:09:28.396Z,1520662168.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:09:28.784Z,1520662168.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:09:29.183Z,1520662169.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:09:29.589Z,1520662169.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:09:29.981Z,1520662169.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:09:30.382Z,1520662170.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:09:30.791Z,1520662170.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:09:31.193Z,1520662171.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:09:31.590Z,1520662171.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:09:31.988Z,1520662171.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:09:32.389Z,1520662172.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:09:32.775Z,1520662172.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:09:33.201Z,1520662173.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:09:33.602Z,1520662173.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:09:34.002Z,1520662174.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:09:34.407Z,1520662174.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:09:34.785Z,1520662174.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:09:35.209Z,1520662175.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:09:35.578Z,1520662175.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:09:35.979Z,1520662175.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:09:36.377Z,1520662176.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:09:36.818Z,1520662176.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:09:37.217Z,1520662177.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:09:37.587Z,1520662177.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:09:37.984Z,1520662177.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:09:38.384Z,1520662178.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:09:38.784Z,1520662178.784 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:09:38.784Z,1520662178.784 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 18
2018-03-10T06:09:38.784Z,1520662178.784 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-03-10T06:09:38.786Z,1520662178.786 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:09:38.786Z,1520662178.786 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 18
2018-03-10T06:09:38.786Z,1520662178.786 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-03-10T06:09:38.788Z,1520662178.788 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:09:38.788Z,1520662178.788 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 18
2018-03-10T06:09:38.788Z,1520662178.788 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-10T06:09:38.875Z,1520662178.875 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-03-10T06:09:38.875Z,1520662178.875 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-03-10T06:09:38.876Z,1520662178.876 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-10T06:09:39.267Z,1520662179.267 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-03-10T06:09:39.267Z,1520662179.267 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 18
2018-03-10T06:09:39.268Z,1520662179.268 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-03-10T06:09:39.268Z,1520662179.268 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 18
2018-03-10T06:09:39.268Z,1520662179.268 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-10T06:09:39.268Z,1520662179.268 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 18
2018-03-10T06:09:39.590Z,1520662179.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-03-10T06:09:39.590Z,1520662179.590 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-03-10T06:09:39.591Z,1520662179.591 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-03-10T06:09:39.591Z,1520662179.591 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-03-10T06:09:39.592Z,1520662179.592 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-03-10T06:09:39.592Z,1520662179.592 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-03-10T06:09:39.592Z,1520662179.592 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-10T06:09:39.593Z,1520662179.593 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-10T06:09:39.593Z,1520662179.593 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-10T06:09:39.994Z,1520662179.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-03-10T06:09:39.995Z,1520662179.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:09:40.400Z,1520662180.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-03-10T06:09:40.401Z,1520662180.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:09:40.790Z,1520662180.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-03-10T06:09:40.791Z,1520662180.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:09:41.181Z,1520662181.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-03-10T06:09:41.182Z,1520662181.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:09:41.585Z,1520662181.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-03-10T06:09:41.586Z,1520662181.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:09:41.986Z,1520662181.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-03-10T06:09:41.987Z,1520662181.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:09:42.381Z,1520662182.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-03-10T06:09:42.382Z,1520662182.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:09:42.801Z,1520662182.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-03-10T06:09:42.802Z,1520662182.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:09:43.204Z,1520662183.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-03-10T06:09:43.205Z,1520662183.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:09:43.597Z,1520662183.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-03-10T06:09:43.598Z,1520662183.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:09:43.986Z,1520662183.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-03-10T06:09:43.987Z,1520662183.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:09:44.382Z,1520662184.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-03-10T06:09:44.382Z,1520662184.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:09:44.785Z,1520662184.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-03-10T06:09:44.786Z,1520662184.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:09:45.196Z,1520662185.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-03-10T06:09:45.197Z,1520662185.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:09:45.604Z,1520662185.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-03-10T06:09:45.605Z,1520662185.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:09:46.000Z,1520662186.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-03-10T06:09:46.001Z,1520662186.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:09:46.400Z,1520662186.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-03-10T06:09:46.401Z,1520662186.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:09:46.793Z,1520662186.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-03-10T06:09:46.794Z,1520662186.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:09:47.195Z,1520662187.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-03-10T06:09:47.196Z,1520662187.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:09:47.676Z,1520662187.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.9 s old, using for 20.0 s.
2018-03-10T06:09:47.677Z,1520662187.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:09:48.012Z,1520662188.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-03-10T06:09:48.013Z,1520662188.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:09:48.409Z,1520662188.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-03-10T06:09:48.409Z,1520662188.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:09:48.804Z,1520662188.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-03-10T06:09:48.805Z,1520662188.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:09:49.173Z,1520662189.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-03-10T06:09:49.174Z,1520662189.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:09:49.602Z,1520662189.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-03-10T06:09:49.603Z,1520662189.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:09:50.058Z,1520662190.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.3 s old, using for 20.0 s.
2018-03-10T06:09:50.059Z,1520662190.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:09:50.417Z,1520662190.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-03-10T06:09:50.418Z,1520662190.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:09:50.773Z,1520662190.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-03-10T06:09:50.774Z,1520662190.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:09:51.213Z,1520662191.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-03-10T06:09:51.214Z,1520662191.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:09:51.588Z,1520662191.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-03-10T06:09:51.589Z,1520662191.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:09:51.989Z,1520662191.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-03-10T06:09:51.990Z,1520662191.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:09:52.386Z,1520662192.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-03-10T06:09:52.386Z,1520662192.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:09:52.789Z,1520662192.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-03-10T06:09:52.790Z,1520662192.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:09:53.189Z,1520662193.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-03-10T06:09:53.190Z,1520662193.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:09:53.589Z,1520662193.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-03-10T06:09:53.590Z,1520662193.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:09:53.984Z,1520662193.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-03-10T06:09:53.985Z,1520662193.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:09:54.381Z,1520662194.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-03-10T06:09:54.382Z,1520662194.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:09:54.784Z,1520662194.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-03-10T06:09:54.785Z,1520662194.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:09:55.182Z,1520662195.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-03-10T06:09:55.184Z,1520662195.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:09:55.589Z,1520662195.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-03-10T06:09:55.590Z,1520662195.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:09:56.179Z,1520662196.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.4 s old, using for 20.0 s.
2018-03-10T06:09:56.180Z,1520662196.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:09:56.387Z,1520662196.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-03-10T06:09:56.388Z,1520662196.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:09:56.782Z,1520662196.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-03-10T06:09:56.784Z,1520662196.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:09:57.183Z,1520662197.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2018-03-10T06:09:57.184Z,1520662197.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:09:57.582Z,1520662197.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2018-03-10T06:09:57.584Z,1520662197.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:09:58.045Z,1520662198.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.3 s old, using for 20.0 s.
2018-03-10T06:09:58.046Z,1520662198.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:09:58.374Z,1520662198.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2018-03-10T06:09:58.375Z,1520662198.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:09:58.789Z,1520662198.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:09:59.196Z,1520662199.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:09:59.644Z,1520662199.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:09:59.995Z,1520662199.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:10:00.386Z,1520662200.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:10:00.789Z,1520662200.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:10:01.188Z,1520662201.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:10:01.604Z,1520662201.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:10:02.005Z,1520662202.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:10:02.401Z,1520662202.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:10:02.786Z,1520662202.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:10:03.189Z,1520662203.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:10:03.589Z,1520662203.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:10:03.986Z,1520662203.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:10:04.389Z,1520662204.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:10:04.805Z,1520662204.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:10:05.197Z,1520662205.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:10:05.605Z,1520662205.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:10:05.986Z,1520662205.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:10:06.388Z,1520662206.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:10:06.787Z,1520662206.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:10:07.186Z,1520662207.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:10:07.600Z,1520662207.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:10:08.005Z,1520662208.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:10:08.401Z,1520662208.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:10:08.792Z,1520662208.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:10:09.194Z,1520662209.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:10:09.597Z,1520662209.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:10:09.996Z,1520662209.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:10:13.111Z,1520662213.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:10:13.290Z,1520662213.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:10:13.659Z,1520662213.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:10:14.056Z,1520662214.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:10:14.445Z,1520662214.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:10:14.850Z,1520662214.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:10:15.256Z,1520662215.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:10:15.654Z,1520662215.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:10:16.065Z,1520662216.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:10:16.458Z,1520662216.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:10:16.855Z,1520662216.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:10:17.233Z,1520662217.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:10:17.634Z,1520662217.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:10:18.037Z,1520662218.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:10:18.433Z,1520662218.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:10:18.864Z,1520662218.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:10:19.258Z,1520662219.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:10:19.660Z,1520662219.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:10:20.038Z,1520662220.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:10:20.438Z,1520662220.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:10:20.835Z,1520662220.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:10:21.261Z,1520662221.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:10:21.664Z,1520662221.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:10:22.065Z,1520662222.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:10:22.468Z,1520662222.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:10:22.838Z,1520662222.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:10:23.238Z,1520662223.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:10:23.645Z,1520662223.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:10:24.045Z,1520662224.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:10:24.492Z,1520662224.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:10:24.880Z,1520662224.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:10:25.247Z,1520662225.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:10:25.647Z,1520662225.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:10:26.043Z,1520662226.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:10:26.444Z,1520662226.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:10:26.843Z,1520662226.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:10:27.246Z,1520662227.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:10:27.647Z,1520662227.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:10:28.046Z,1520662228.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:10:28.447Z,1520662228.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:10:28.838Z,1520662228.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:10:29.242Z,1520662229.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:10:29.645Z,1520662229.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:10:30.045Z,1520662230.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:10:30.442Z,1520662230.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:10:30.853Z,1520662230.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:10:31.251Z,1520662231.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:10:31.647Z,1520662231.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:10:32.043Z,1520662232.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:10:32.444Z,1520662232.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:10:32.843Z,1520662232.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:10:33.245Z,1520662233.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:10:33.647Z,1520662233.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:10:34.047Z,1520662234.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:10:34.447Z,1520662234.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:10:34.842Z,1520662234.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:10:35.241Z,1520662235.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:10:35.649Z,1520662235.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:10:36.077Z,1520662236.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:10:36.461Z,1520662236.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:10:36.857Z,1520662236.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:10:37.251Z,1520662237.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:10:37.661Z,1520662237.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:10:38.046Z,1520662238.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:10:38.447Z,1520662238.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:10:38.845Z,1520662238.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:10:39.243Z,1520662239.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:10:39.655Z,1520662239.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:10:40.053Z,1520662240.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:10:40.455Z,1520662240.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:10:40.848Z,1520662240.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:10:41.241Z,1520662241.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:10:41.649Z,1520662241.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:10:42.046Z,1520662242.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:10:42.443Z,1520662242.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:10:42.858Z,1520662242.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:10:43.254Z,1520662243.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:10:43.655Z,1520662243.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:10:44.047Z,1520662244.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:10:44.442Z,1520662244.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:10:44.845Z,1520662244.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:10:45.246Z,1520662245.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:10:45.654Z,1520662245.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:10:46.056Z,1520662246.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:10:46.461Z,1520662246.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:10:46.851Z,1520662246.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:10:47.293Z,1520662247.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:10:47.665Z,1520662247.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:10:48.042Z,1520662248.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:10:48.449Z,1520662248.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:10:48.857Z,1520662248.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:10:49.260Z,1520662249.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:10:49.655Z,1520662249.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:10:50.047Z,1520662250.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:10:50.447Z,1520662250.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:10:50.846Z,1520662250.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:10:51.247Z,1520662251.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:10:51.655Z,1520662251.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:10:52.059Z,1520662252.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:10:52.468Z,1520662252.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:10:52.845Z,1520662252.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:10:53.246Z,1520662253.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:10:53.647Z,1520662253.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:10:54.046Z,1520662254.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:10:54.457Z,1520662254.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:10:54.865Z,1520662254.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:10:55.260Z,1520662255.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:10:55.657Z,1520662255.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:10:56.053Z,1520662256.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:10:56.446Z,1520662256.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:10:56.845Z,1520662256.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:10:57.248Z,1520662257.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:10:57.647Z,1520662257.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:10:58.057Z,1520662258.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:10:58.488Z,1520662258.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:10:58.865Z,1520662258.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:10:59.242Z,1520662259.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:10:59.648Z,1520662259.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:11:00.042Z,1520662260.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:11:00.443Z,1520662260.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:11:00.854Z,1520662260.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:11:01.254Z,1520662261.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:11:01.654Z,1520662261.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:11:02.043Z,1520662262.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:11:02.442Z,1520662262.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:11:02.849Z,1520662262.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:11:03.241Z,1520662263.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:11:03.654Z,1520662263.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:11:04.061Z,1520662264.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:11:04.455Z,1520662264.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:11:04.842Z,1520662264.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:11:05.249Z,1520662265.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:11:05.645Z,1520662265.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:11:06.045Z,1520662266.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:11:06.442Z,1520662266.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:11:06.860Z,1520662266.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:11:07.261Z,1520662267.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:11:07.661Z,1520662267.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:11:08.049Z,1520662268.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:11:08.448Z,1520662268.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:11:08.843Z,1520662268.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:11:09.256Z,1520662269.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:11:09.697Z,1520662269.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:11:09.700Z,1520662269.700 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-03-10T06:11:09.700Z,1520662269.700 [Default:CheckIn:C.Wait] Stopped
2018-03-10T06:11:09.700Z,1520662269.700 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-03-10T06:11:09.700Z,1520662269.700 [Default:CheckIn:D] Running Loop=1
2018-03-10T06:11:10.092Z,1520662270.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:11:10.095Z,1520662270.095 [Default:CheckIn:D] Stopped
2018-03-10T06:11:10.095Z,1520662270.095 [Default:CheckIn:E] Running Loop=1
2018-03-10T06:11:13.157Z,1520662273.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:11:13.160Z,1520662273.160 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 51.869572 min 
2018-03-10T06:11:13.161Z,1520662273.161 [Default:CheckIn:E] Stopped
2018-03-10T06:11:13.161Z,1520662273.161 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-03-10T06:11:13.161Z,1520662273.161 [Default:CheckIn] Stopped
2018-03-10T06:11:13.161Z,1520662273.161 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-03-10T06:11:13.161Z,1520662273.161 [Default:CheckIn](INFO): Running loop #6
2018-03-10T06:11:13.161Z,1520662273.161 [Default:CheckIn] Running Loop=6
2018-03-10T06:11:13.161Z,1520662273.161 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-03-10T06:11:13.161Z,1520662273.161 [Default:CheckIn:Read_GPS] Running Loop=1
2018-03-10T06:11:13.317Z,1520662273.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:11:13.702Z,1520662273.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:11:14.101Z,1520662274.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:11:14.503Z,1520662274.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:11:14.914Z,1520662274.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:11:15.310Z,1520662275.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:11:15.711Z,1520662275.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:11:16.099Z,1520662276.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:11:16.503Z,1520662276.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:11:16.909Z,1520662276.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:11:17.299Z,1520662277.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:11:17.712Z,1520662277.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:11:18.111Z,1520662278.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:11:18.511Z,1520662278.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:11:18.913Z,1520662278.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:11:19.305Z,1520662279.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:11:19.705Z,1520662279.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:11:20.101Z,1520662280.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:11:20.514Z,1520662280.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:11:20.858Z,1520662280.858 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-03-10T06:11:20.858Z,1520662280.858 [NAL9602] Data Fault, FailCount= 1
2018-03-10T06:11:20.858Z,1520662280.858 [NAL9602](ERROR): Data Fault
2018-03-10T06:11:20.937Z,1520662280.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:11:21.024Z,1520662281.024 [CBIT](ERROR): Data Fault in component: NAL9602
2018-03-10T06:11:21.258Z,1520662281.258 [NAL9602](INFO): Powering down
2018-03-10T06:11:21.320Z,1520662281.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:11:21.713Z,1520662281.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:11:22.088Z,1520662282.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:11:22.179Z,1520662282.179 [CBIT](INFO): Clearing failed state for component NAL9602
2018-03-10T06:11:22.179Z,1520662282.179 [NAL9602] No Fault, FailCount= 1
2018-03-10T06:11:22.509Z,1520662282.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:11:22.909Z,1520662282.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:11:23.309Z,1520662283.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:11:23.688Z,1520662283.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:11:24.086Z,1520662284.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:11:24.506Z,1520662284.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:11:24.910Z,1520662284.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:11:25.289Z,1520662285.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:11:25.702Z,1520662285.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:11:26.089Z,1520662286.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:11:26.483Z,1520662286.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:11:26.890Z,1520662286.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:11:27.286Z,1520662287.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:11:27.690Z,1520662287.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:11:28.090Z,1520662288.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:11:28.490Z,1520662288.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:11:28.890Z,1520662288.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:11:29.291Z,1520662289.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:11:29.689Z,1520662289.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:11:30.092Z,1520662290.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:11:30.489Z,1520662290.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:11:30.889Z,1520662290.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:11:31.290Z,1520662291.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:11:31.722Z,1520662291.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:11:32.118Z,1520662292.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:11:32.493Z,1520662292.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:11:32.889Z,1520662292.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:11:33.295Z,1520662293.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:11:33.721Z,1520662293.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:11:34.094Z,1520662294.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:11:34.488Z,1520662294.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:11:34.889Z,1520662294.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:11:35.293Z,1520662295.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:11:35.692Z,1520662295.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:11:36.089Z,1520662296.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:11:36.493Z,1520662296.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:11:36.888Z,1520662296.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:11:37.288Z,1520662297.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:11:37.693Z,1520662297.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:11:38.092Z,1520662298.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:11:38.488Z,1520662298.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:11:38.894Z,1520662298.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:11:39.292Z,1520662299.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:11:39.694Z,1520662299.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:11:40.097Z,1520662300.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:11:40.497Z,1520662300.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:11:40.894Z,1520662300.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:11:41.293Z,1520662301.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:11:41.697Z,1520662301.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:11:42.093Z,1520662302.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:11:42.493Z,1520662302.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:11:42.894Z,1520662302.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:11:43.298Z,1520662303.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:11:43.725Z,1520662303.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:11:44.097Z,1520662304.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:11:44.504Z,1520662304.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:11:44.925Z,1520662304.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:11:45.304Z,1520662305.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:11:45.700Z,1520662305.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:11:46.123Z,1520662306.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:11:46.508Z,1520662306.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:11:46.882Z,1520662306.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:11:47.309Z,1520662307.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:11:47.710Z,1520662307.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:11:48.120Z,1520662308.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:11:48.518Z,1520662308.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:11:48.910Z,1520662308.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:11:49.283Z,1520662309.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:11:49.693Z,1520662309.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:11:50.092Z,1520662310.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:11:50.489Z,1520662310.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:11:50.915Z,1520662310.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:11:51.288Z,1520662311.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:11:51.657Z,1520662311.657 [NAL9602](INFO): Powering up NAL9602
2018-03-10T06:11:51.690Z,1520662311.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:11:52.113Z,1520662312.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:11:52.517Z,1520662312.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:11:52.889Z,1520662312.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:11:53.313Z,1520662313.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:11:53.691Z,1520662313.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:11:54.094Z,1520662314.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:11:54.528Z,1520662314.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:11:54.888Z,1520662314.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:11:55.297Z,1520662315.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:11:55.697Z,1520662315.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:11:56.096Z,1520662316.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:11:56.489Z,1520662316.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:11:56.897Z,1520662316.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:11:57.296Z,1520662317.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:11:57.729Z,1520662317.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:11:58.093Z,1520662318.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:11:58.488Z,1520662318.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:11:58.896Z,1520662318.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:11:59.328Z,1520662319.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:11:59.696Z,1520662319.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:12:00.094Z,1520662320.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:12:00.497Z,1520662320.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:12:00.897Z,1520662320.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:12:01.294Z,1520662321.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:12:01.693Z,1520662321.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:12:02.120Z,1520662322.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:12:02.463Z,1520662322.463 [NAL9602](INFO): NAL9602 initialized
2018-03-10T06:12:02.495Z,1520662322.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:12:02.894Z,1520662322.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:12:03.327Z,1520662323.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:12:03.706Z,1520662323.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:12:04.125Z,1520662324.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:12:04.495Z,1520662324.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:12:04.900Z,1520662324.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:12:05.332Z,1520662325.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:12:05.729Z,1520662325.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:12:06.132Z,1520662326.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:12:06.498Z,1520662326.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:12:06.898Z,1520662326.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:12:07.297Z,1520662327.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:12:07.702Z,1520662327.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:12:08.103Z,1520662328.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:12:08.497Z,1520662328.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:12:08.896Z,1520662328.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:12:09.303Z,1520662329.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:12:09.710Z,1520662329.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:12:10.110Z,1520662330.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:12:13.235Z,1520662333.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:12:13.405Z,1520662333.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:12:13.798Z,1520662333.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:12:14.202Z,1520662334.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:12:14.600Z,1520662334.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:12:14.995Z,1520662334.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:12:15.370Z,1520662335.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:12:15.793Z,1520662335.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:12:16.201Z,1520662336.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:12:16.596Z,1520662336.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:12:17.000Z,1520662337.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:12:17.400Z,1520662337.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:12:17.774Z,1520662337.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:12:18.169Z,1520662338.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:12:18.573Z,1520662338.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:12:18.974Z,1520662338.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:12:19.379Z,1520662339.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:12:19.787Z,1520662339.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:12:20.213Z,1520662340.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:12:20.573Z,1520662340.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:12:20.998Z,1520662340.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:12:21.370Z,1520662341.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:12:21.773Z,1520662341.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:12:22.169Z,1520662342.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:12:22.583Z,1520662342.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:12:22.987Z,1520662342.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:12:23.382Z,1520662343.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:12:23.770Z,1520662343.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:12:24.177Z,1520662344.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:12:24.601Z,1520662344.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:12:24.977Z,1520662344.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:12:25.417Z,1520662345.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:12:25.865Z,1520662345.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:12:26.192Z,1520662346.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:12:26.582Z,1520662346.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:12:26.981Z,1520662346.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:12:27.390Z,1520662347.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:12:27.801Z,1520662347.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:12:28.183Z,1520662348.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:12:28.598Z,1520662348.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:12:28.994Z,1520662348.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:12:29.390Z,1520662349.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:12:29.792Z,1520662349.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:12:30.181Z,1520662350.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:12:30.581Z,1520662350.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:12:30.985Z,1520662350.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:12:31.389Z,1520662351.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:12:31.794Z,1520662351.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:12:32.194Z,1520662352.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:12:32.583Z,1520662352.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:12:32.987Z,1520662352.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:12:33.405Z,1520662353.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:12:33.807Z,1520662353.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:12:34.186Z,1520662354.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:12:34.596Z,1520662354.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:12:35.005Z,1520662355.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:12:35.401Z,1520662355.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:12:35.793Z,1520662355.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:12:36.173Z,1520662356.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:12:36.577Z,1520662356.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:12:36.974Z,1520662356.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:12:37.414Z,1520662357.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:12:37.809Z,1520662357.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:12:38.212Z,1520662358.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:12:38.573Z,1520662358.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:12:38.973Z,1520662358.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:12:39.395Z,1520662359.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:12:39.810Z,1520662359.810 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:12:39.810Z,1520662359.810 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 19
2018-03-10T06:12:39.810Z,1520662359.810 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-03-10T06:12:39.812Z,1520662359.812 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:12:39.812Z,1520662359.812 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 19
2018-03-10T06:12:39.813Z,1520662359.813 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-03-10T06:12:39.814Z,1520662359.814 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:12:39.814Z,1520662359.814 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 19
2018-03-10T06:12:39.814Z,1520662359.814 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-10T06:12:39.891Z,1520662359.891 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-03-10T06:12:39.891Z,1520662359.891 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-03-10T06:12:39.892Z,1520662359.892 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-10T06:12:40.263Z,1520662360.263 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-03-10T06:12:40.263Z,1520662360.263 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 19
2018-03-10T06:12:40.264Z,1520662360.264 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-03-10T06:12:40.264Z,1520662360.264 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 19
2018-03-10T06:12:40.264Z,1520662360.264 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-10T06:12:40.264Z,1520662360.264 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 19
2018-03-10T06:12:40.592Z,1520662360.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-03-10T06:12:40.592Z,1520662360.592 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-03-10T06:12:40.592Z,1520662360.592 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-03-10T06:12:40.593Z,1520662360.593 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-03-10T06:12:40.593Z,1520662360.593 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-03-10T06:12:40.593Z,1520662360.593 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-03-10T06:12:40.594Z,1520662360.594 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-10T06:12:40.594Z,1520662360.594 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-10T06:12:40.594Z,1520662360.594 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-10T06:12:40.992Z,1520662360.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-03-10T06:12:40.993Z,1520662360.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:12:41.395Z,1520662361.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-03-10T06:12:41.397Z,1520662361.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:12:41.784Z,1520662361.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-03-10T06:12:41.785Z,1520662361.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:12:42.179Z,1520662362.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-03-10T06:12:42.180Z,1520662362.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:12:42.580Z,1520662362.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-03-10T06:12:42.581Z,1520662362.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:12:42.980Z,1520662362.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-03-10T06:12:42.981Z,1520662362.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:12:43.387Z,1520662363.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-03-10T06:12:43.388Z,1520662363.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:12:43.789Z,1520662363.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-03-10T06:12:43.790Z,1520662363.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:12:44.196Z,1520662364.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-03-10T06:12:44.198Z,1520662364.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:12:44.574Z,1520662364.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-03-10T06:12:44.575Z,1520662364.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:12:44.978Z,1520662364.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-03-10T06:12:44.980Z,1520662364.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:12:45.380Z,1520662365.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-03-10T06:12:45.381Z,1520662365.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:12:45.781Z,1520662365.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-03-10T06:12:45.781Z,1520662365.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:12:46.196Z,1520662366.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-03-10T06:12:46.197Z,1520662366.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:12:46.591Z,1520662366.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-03-10T06:12:46.592Z,1520662366.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:12:46.996Z,1520662366.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-03-10T06:12:46.997Z,1520662366.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:12:47.391Z,1520662367.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-03-10T06:12:47.392Z,1520662367.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:12:47.781Z,1520662367.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-03-10T06:12:47.782Z,1520662367.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:12:48.181Z,1520662368.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-03-10T06:12:48.181Z,1520662368.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:12:48.582Z,1520662368.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-03-10T06:12:48.583Z,1520662368.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:12:48.985Z,1520662368.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-03-10T06:12:48.986Z,1520662368.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:12:49.393Z,1520662369.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-03-10T06:12:49.395Z,1520662369.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:12:49.792Z,1520662369.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-03-10T06:12:49.793Z,1520662369.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:12:50.198Z,1520662370.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-03-10T06:12:50.199Z,1520662370.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:12:50.604Z,1520662370.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-03-10T06:12:50.606Z,1520662370.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:12:50.981Z,1520662370.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-03-10T06:12:50.982Z,1520662370.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:12:51.392Z,1520662371.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-03-10T06:12:51.393Z,1520662371.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:12:51.790Z,1520662371.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-03-10T06:12:51.791Z,1520662371.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:12:52.196Z,1520662372.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-03-10T06:12:52.197Z,1520662372.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:12:52.598Z,1520662372.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-03-10T06:12:52.599Z,1520662372.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:12:52.994Z,1520662372.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-03-10T06:12:52.995Z,1520662372.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:12:53.391Z,1520662373.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-03-10T06:12:53.392Z,1520662373.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:12:53.766Z,1520662373.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-03-10T06:12:53.788Z,1520662373.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:12:54.194Z,1520662374.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-03-10T06:12:54.196Z,1520662374.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:12:54.570Z,1520662374.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-03-10T06:12:54.570Z,1520662374.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:12:54.968Z,1520662374.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-03-10T06:12:54.968Z,1520662374.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:12:55.400Z,1520662375.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-03-10T06:12:55.401Z,1520662375.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:12:55.801Z,1520662375.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-03-10T06:12:55.802Z,1520662375.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:12:56.199Z,1520662376.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-03-10T06:12:56.200Z,1520662376.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:12:56.604Z,1520662376.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-03-10T06:12:56.605Z,1520662376.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:12:56.976Z,1520662376.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-03-10T06:12:56.977Z,1520662376.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:12:57.376Z,1520662377.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-03-10T06:12:57.377Z,1520662377.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:12:57.769Z,1520662377.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-03-10T06:12:57.770Z,1520662377.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:12:58.169Z,1520662378.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2018-03-10T06:12:58.170Z,1520662378.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:12:58.599Z,1520662378.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2018-03-10T06:12:58.601Z,1520662378.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:12:59.002Z,1520662379.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2018-03-10T06:12:59.003Z,1520662379.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:12:59.398Z,1520662379.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2018-03-10T06:12:59.400Z,1520662379.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:12:59.776Z,1520662379.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 20.0 s old, using for 20.0 s.
2018-03-10T06:12:59.777Z,1520662379.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:13:00.177Z,1520662380.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:13:00.574Z,1520662380.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:13:00.980Z,1520662380.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:13:01.402Z,1520662381.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:13:01.806Z,1520662381.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:13:02.207Z,1520662382.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:13:02.573Z,1520662382.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:13:02.979Z,1520662382.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:13:03.410Z,1520662383.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:13:03.777Z,1520662383.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:13:04.177Z,1520662384.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:13:04.631Z,1520662384.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:13:05.020Z,1520662385.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:13:05.386Z,1520662385.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:13:05.780Z,1520662385.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:13:06.178Z,1520662386.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:13:06.581Z,1520662386.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:13:06.984Z,1520662386.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:13:07.386Z,1520662387.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:13:07.785Z,1520662387.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:13:08.186Z,1520662388.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:13:08.585Z,1520662388.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:13:08.977Z,1520662388.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:13:09.384Z,1520662389.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:13:09.779Z,1520662389.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:13:10.181Z,1520662390.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:13:13.314Z,1520662393.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:13:13.477Z,1520662393.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:13:13.883Z,1520662393.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:13:14.266Z,1520662394.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:13:14.670Z,1520662394.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:13:15.067Z,1520662395.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:13:15.483Z,1520662395.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:13:15.897Z,1520662395.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:13:16.274Z,1520662396.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:13:16.666Z,1520662396.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:13:17.074Z,1520662397.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:13:17.476Z,1520662397.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:13:17.876Z,1520662397.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:13:18.281Z,1520662398.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:13:18.680Z,1520662398.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:13:19.084Z,1520662399.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:13:19.454Z,1520662399.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:13:19.871Z,1520662399.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:13:20.283Z,1520662400.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:13:20.685Z,1520662400.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:13:21.081Z,1520662401.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:13:21.484Z,1520662401.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:13:21.878Z,1520662401.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:13:22.257Z,1520662402.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:13:22.654Z,1520662402.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:13:23.057Z,1520662403.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:13:23.479Z,1520662403.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:13:23.881Z,1520662403.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:13:24.287Z,1520662404.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:13:24.657Z,1520662404.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:13:25.062Z,1520662405.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:13:25.465Z,1520662405.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:13:25.858Z,1520662405.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:13:26.286Z,1520662406.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:13:26.686Z,1520662406.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:13:27.083Z,1520662407.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:13:27.464Z,1520662407.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:13:27.899Z,1520662407.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:13:28.297Z,1520662408.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:13:28.666Z,1520662408.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:13:29.068Z,1520662409.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:13:29.468Z,1520662409.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:13:29.895Z,1520662409.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:13:30.262Z,1520662410.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:13:30.669Z,1520662410.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:13:31.076Z,1520662411.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:13:31.471Z,1520662411.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:13:31.866Z,1520662411.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:13:32.262Z,1520662412.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:13:32.663Z,1520662412.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:13:33.065Z,1520662413.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:13:33.471Z,1520662413.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:13:33.871Z,1520662413.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:13:34.277Z,1520662414.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:13:34.668Z,1520662414.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:13:35.062Z,1520662415.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:13:35.465Z,1520662415.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:13:35.892Z,1520662415.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:13:36.278Z,1520662416.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:13:36.675Z,1520662416.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:13:37.080Z,1520662417.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:13:37.468Z,1520662417.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:13:37.869Z,1520662417.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:13:38.280Z,1520662418.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:13:38.685Z,1520662418.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:13:39.081Z,1520662419.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:13:39.469Z,1520662419.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:13:39.869Z,1520662419.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:13:40.282Z,1520662420.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:13:40.685Z,1520662420.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:13:41.079Z,1520662421.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:13:41.464Z,1520662421.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:13:41.874Z,1520662421.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:13:42.272Z,1520662422.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:13:42.678Z,1520662422.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:13:43.076Z,1520662423.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:13:43.477Z,1520662423.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:13:43.871Z,1520662423.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:13:44.273Z,1520662424.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:13:44.687Z,1520662424.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:13:45.102Z,1520662425.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:13:45.492Z,1520662425.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:13:45.888Z,1520662425.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:13:46.293Z,1520662426.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:13:46.667Z,1520662426.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:13:47.064Z,1520662427.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:13:47.463Z,1520662427.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:13:47.904Z,1520662427.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:13:48.261Z,1520662428.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:13:48.705Z,1520662428.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:13:49.079Z,1520662429.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:13:49.485Z,1520662429.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:13:49.869Z,1520662429.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:13:50.269Z,1520662430.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:13:50.667Z,1520662430.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:13:51.066Z,1520662431.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:13:51.474Z,1520662431.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:13:51.877Z,1520662431.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:13:52.278Z,1520662432.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:13:52.664Z,1520662432.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:13:53.070Z,1520662433.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:13:53.489Z,1520662433.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:13:53.875Z,1520662433.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:13:54.270Z,1520662434.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:13:54.693Z,1520662434.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:13:55.080Z,1520662435.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:13:55.471Z,1520662435.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:13:55.865Z,1520662435.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:13:56.273Z,1520662436.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:13:56.673Z,1520662436.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:13:57.068Z,1520662437.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:13:57.481Z,1520662437.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:13:57.872Z,1520662437.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:13:58.275Z,1520662438.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:13:58.669Z,1520662438.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:13:59.069Z,1520662439.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:13:59.468Z,1520662439.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:13:59.872Z,1520662439.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:14:00.268Z,1520662440.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:14:00.681Z,1520662440.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:14:01.078Z,1520662441.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:14:01.475Z,1520662441.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:14:01.869Z,1520662441.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:14:02.273Z,1520662442.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:14:02.668Z,1520662442.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:14:03.067Z,1520662443.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:14:03.485Z,1520662443.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:14:03.875Z,1520662443.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:14:04.276Z,1520662444.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:14:04.669Z,1520662444.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:14:05.067Z,1520662445.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:14:05.474Z,1520662445.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:14:05.893Z,1520662445.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:14:06.273Z,1520662446.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:14:06.680Z,1520662446.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:14:07.082Z,1520662447.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:14:07.493Z,1520662447.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:14:07.870Z,1520662447.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:14:08.274Z,1520662448.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:14:08.675Z,1520662448.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:14:09.060Z,1520662449.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:14:09.493Z,1520662449.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:14:09.882Z,1520662449.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:14:10.278Z,1520662450.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:14:13.381Z,1520662453.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:14:13.534Z,1520662453.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:14:13.943Z,1520662453.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:14:14.344Z,1520662454.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:14:14.748Z,1520662454.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:14:15.137Z,1520662455.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:14:15.538Z,1520662455.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:14:15.984Z,1520662455.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:14:16.345Z,1520662456.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:14:16.743Z,1520662456.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:14:17.137Z,1520662457.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:14:17.536Z,1520662457.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:14:17.935Z,1520662457.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:14:18.353Z,1520662458.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:14:18.748Z,1520662458.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:14:19.156Z,1520662459.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:14:19.561Z,1520662459.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:14:19.945Z,1520662459.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:14:20.361Z,1520662460.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:14:20.723Z,1520662460.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:14:21.129Z,1520662461.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:14:21.522Z,1520662461.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:14:21.921Z,1520662461.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:14:22.353Z,1520662462.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:14:22.751Z,1520662462.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:14:23.132Z,1520662463.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:14:23.525Z,1520662463.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:14:23.928Z,1520662463.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:14:24.321Z,1520662464.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:14:24.725Z,1520662464.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:14:25.133Z,1520662465.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:14:25.558Z,1520662465.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:14:25.931Z,1520662465.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:14:26.331Z,1520662466.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:14:26.727Z,1520662466.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:14:27.126Z,1520662467.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:14:27.527Z,1520662467.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:14:27.926Z,1520662467.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:14:28.331Z,1520662468.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:14:28.731Z,1520662468.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:14:29.132Z,1520662469.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:14:29.525Z,1520662469.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:14:29.928Z,1520662469.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:14:30.327Z,1520662470.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:14:30.733Z,1520662470.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:14:31.145Z,1520662471.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:14:31.544Z,1520662471.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:14:31.965Z,1520662471.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:14:32.338Z,1520662472.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:14:32.733Z,1520662472.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:14:33.133Z,1520662473.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:14:33.528Z,1520662473.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:14:33.928Z,1520662473.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:14:34.337Z,1520662474.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:14:34.745Z,1520662474.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:14:35.134Z,1520662475.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:14:35.525Z,1520662475.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:14:35.929Z,1520662475.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:14:36.333Z,1520662476.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:14:36.730Z,1520662476.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:14:37.126Z,1520662477.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:14:37.534Z,1520662477.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:14:37.945Z,1520662477.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:14:38.339Z,1520662478.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:14:38.729Z,1520662478.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:14:39.128Z,1520662479.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:14:39.533Z,1520662479.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:14:39.933Z,1520662479.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:14:40.338Z,1520662480.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:14:40.745Z,1520662480.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:14:41.138Z,1520662481.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:14:41.528Z,1520662481.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:14:41.927Z,1520662481.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:14:42.333Z,1520662482.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:14:42.726Z,1520662482.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:14:43.133Z,1520662483.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:14:43.569Z,1520662483.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:14:43.945Z,1520662483.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:14:44.375Z,1520662484.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:14:44.725Z,1520662484.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:14:45.133Z,1520662485.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:14:45.532Z,1520662485.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:14:45.930Z,1520662485.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:14:46.340Z,1520662486.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:14:46.740Z,1520662486.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:14:47.135Z,1520662487.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:14:47.527Z,1520662487.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:14:47.937Z,1520662487.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:14:48.328Z,1520662488.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:14:48.733Z,1520662488.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:14:49.133Z,1520662489.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:14:49.539Z,1520662489.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:14:49.938Z,1520662489.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:14:50.341Z,1520662490.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:14:50.721Z,1520662490.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:14:51.117Z,1520662491.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:14:51.519Z,1520662491.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:14:51.925Z,1520662491.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:14:52.347Z,1520662492.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:14:52.751Z,1520662492.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:14:53.151Z,1520662493.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:14:53.525Z,1520662493.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:14:53.922Z,1520662493.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:14:54.329Z,1520662494.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:14:54.723Z,1520662494.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:14:55.125Z,1520662495.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:14:55.565Z,1520662495.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:14:55.961Z,1520662495.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:14:56.341Z,1520662496.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:14:56.761Z,1520662496.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:14:57.128Z,1520662497.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:14:57.528Z,1520662497.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:14:57.933Z,1520662497.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:14:58.339Z,1520662498.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:14:58.741Z,1520662498.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:14:59.134Z,1520662499.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:14:59.529Z,1520662499.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:14:59.931Z,1520662499.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:15:00.329Z,1520662500.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:15:00.730Z,1520662500.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:15:01.125Z,1520662501.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:15:01.541Z,1520662501.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:15:01.945Z,1520662501.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:15:02.345Z,1520662502.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:15:02.733Z,1520662502.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:15:03.125Z,1520662503.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:15:03.524Z,1520662503.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:15:03.933Z,1520662503.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:15:04.337Z,1520662504.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:15:04.738Z,1520662504.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:15:05.138Z,1520662505.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:15:05.528Z,1520662505.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:15:05.926Z,1520662505.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:15:06.325Z,1520662506.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:15:06.726Z,1520662506.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:15:07.129Z,1520662507.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:15:07.538Z,1520662507.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:15:07.944Z,1520662507.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:15:08.371Z,1520662508.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:15:08.735Z,1520662508.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:15:09.144Z,1520662509.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:15:09.530Z,1520662509.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:15:09.937Z,1520662509.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:15:10.338Z,1520662510.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:15:13.445Z,1520662513.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:15:13.594Z,1520662513.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:15:13.982Z,1520662513.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:15:14.383Z,1520662514.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:15:14.782Z,1520662514.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:15:15.189Z,1520662515.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:15:15.600Z,1520662515.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:15:15.991Z,1520662515.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:15:16.391Z,1520662516.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:15:16.780Z,1520662516.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:15:17.180Z,1520662517.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:15:17.581Z,1520662517.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:15:17.984Z,1520662517.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:15:18.401Z,1520662518.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:15:18.801Z,1520662518.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:15:19.191Z,1520662519.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:15:19.584Z,1520662519.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:15:19.979Z,1520662519.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:15:20.385Z,1520662520.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:15:20.800Z,1520662520.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:15:21.186Z,1520662521.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:15:21.609Z,1520662521.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:15:22.001Z,1520662522.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:15:22.391Z,1520662522.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:15:22.786Z,1520662522.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:15:23.186Z,1520662523.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:15:23.570Z,1520662523.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:15:23.989Z,1520662523.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:15:24.392Z,1520662524.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:15:24.790Z,1520662524.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:15:25.194Z,1520662525.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:15:25.279Z,1520662525.279 [CBIT](DEBUG): EFC running - data check-sum false
2018-03-10T06:15:25.593Z,1520662525.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:15:25.969Z,1520662525.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:15:26.391Z,1520662526.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:15:26.792Z,1520662526.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:15:27.170Z,1520662527.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:15:27.594Z,1520662527.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:15:27.991Z,1520662527.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:15:28.394Z,1520662528.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:15:28.781Z,1520662528.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:15:29.182Z,1520662529.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:15:29.571Z,1520662529.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:15:29.972Z,1520662529.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:15:30.399Z,1520662530.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:15:30.798Z,1520662530.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:15:31.199Z,1520662531.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:15:31.573Z,1520662531.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:15:31.000Z,1520662532.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:15:32.370Z,1520662532.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:15:32.778Z,1520662532.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:15:33.215Z,1520662533.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:15:33.608Z,1520662533.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:15:34.002Z,1520662534.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:15:34.402Z,1520662534.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:15:34.780Z,1520662534.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:15:35.173Z,1520662535.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:15:35.574Z,1520662535.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:15:35.975Z,1520662535.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:15:36.403Z,1520662536.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:15:36.802Z,1520662536.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:15:37.203Z,1520662537.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:15:37.574Z,1520662537.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:15:37.973Z,1520662537.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:15:38.374Z,1520662538.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:15:38.773Z,1520662538.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:15:39.173Z,1520662539.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:15:39.603Z,1520662539.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:15:40.004Z,1520662540.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:15:40.403Z,1520662540.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:15:40.776Z,1520662540.776 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:15:40.776Z,1520662540.776 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 20
2018-03-10T06:15:40.776Z,1520662540.776 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-03-10T06:15:40.778Z,1520662540.778 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:15:40.778Z,1520662540.778 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 20
2018-03-10T06:15:40.778Z,1520662540.778 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-03-10T06:15:40.780Z,1520662540.780 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:15:40.780Z,1520662540.780 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 20
2018-03-10T06:15:40.780Z,1520662540.780 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-10T06:15:40.891Z,1520662540.891 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-03-10T06:15:40.891Z,1520662540.891 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-03-10T06:15:40.892Z,1520662540.892 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-10T06:15:41.247Z,1520662541.247 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-03-10T06:15:41.247Z,1520662541.247 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 20
2018-03-10T06:15:41.248Z,1520662541.248 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-03-10T06:15:41.248Z,1520662541.248 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 20
2018-03-10T06:15:41.248Z,1520662541.248 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-10T06:15:41.248Z,1520662541.248 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 20
2018-03-10T06:15:41.577Z,1520662541.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-03-10T06:15:41.578Z,1520662541.578 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-03-10T06:15:41.578Z,1520662541.578 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-03-10T06:15:41.578Z,1520662541.578 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-03-10T06:15:41.579Z,1520662541.579 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-03-10T06:15:41.579Z,1520662541.579 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-03-10T06:15:41.580Z,1520662541.580 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-10T06:15:41.580Z,1520662541.580 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-10T06:15:41.580Z,1520662541.580 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-10T06:15:41.981Z,1520662541.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-03-10T06:15:41.982Z,1520662541.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:15:42.387Z,1520662542.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-03-10T06:15:42.388Z,1520662542.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:15:42.786Z,1520662542.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-03-10T06:15:42.788Z,1520662542.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:15:43.189Z,1520662543.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-03-10T06:15:43.190Z,1520662543.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:15:43.579Z,1520662543.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-03-10T06:15:43.580Z,1520662543.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:15:43.978Z,1520662543.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-03-10T06:15:43.979Z,1520662543.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:15:44.382Z,1520662544.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-03-10T06:15:44.384Z,1520662544.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:15:44.779Z,1520662544.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-03-10T06:15:44.780Z,1520662544.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:15:45.214Z,1520662545.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-03-10T06:15:45.223Z,1520662545.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:15:45.625Z,1520662545.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-03-10T06:15:45.626Z,1520662545.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:15:46.031Z,1520662546.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.3 s old, using for 20.0 s.
2018-03-10T06:15:46.032Z,1520662546.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:15:46.401Z,1520662546.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-03-10T06:15:46.402Z,1520662546.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:15:46.832Z,1520662546.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.1 s old, using for 20.0 s.
2018-03-10T06:15:46.833Z,1520662546.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:15:47.190Z,1520662547.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-03-10T06:15:47.195Z,1520662547.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:15:47.592Z,1520662547.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-03-10T06:15:47.593Z,1520662547.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:15:48.003Z,1520662548.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-03-10T06:15:48.004Z,1520662548.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:15:48.400Z,1520662548.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-03-10T06:15:48.401Z,1520662548.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:15:48.794Z,1520662548.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-03-10T06:15:48.795Z,1520662548.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:15:49.206Z,1520662549.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-03-10T06:15:49.215Z,1520662549.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:15:49.574Z,1520662549.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-03-10T06:15:49.599Z,1520662549.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:15:50.002Z,1520662550.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-03-10T06:15:50.003Z,1520662550.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:15:50.375Z,1520662550.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-03-10T06:15:50.376Z,1520662550.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:15:50.775Z,1520662550.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-03-10T06:15:50.776Z,1520662550.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:15:51.178Z,1520662551.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-03-10T06:15:51.179Z,1520662551.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:15:51.603Z,1520662551.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-03-10T06:15:51.604Z,1520662551.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:15:52.001Z,1520662552.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-03-10T06:15:52.002Z,1520662552.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:15:52.403Z,1520662552.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-03-10T06:15:52.404Z,1520662552.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:15:52.772Z,1520662552.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-03-10T06:15:52.773Z,1520662552.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:15:53.173Z,1520662553.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-03-10T06:15:53.174Z,1520662553.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:15:53.580Z,1520662553.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-03-10T06:15:53.581Z,1520662553.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:15:53.978Z,1520662553.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-03-10T06:15:53.979Z,1520662553.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:15:54.402Z,1520662554.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-03-10T06:15:54.403Z,1520662554.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:15:54.802Z,1520662554.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-03-10T06:15:54.803Z,1520662554.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:15:55.202Z,1520662555.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-03-10T06:15:55.203Z,1520662555.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:15:55.573Z,1520662555.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-03-10T06:15:55.574Z,1520662555.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:15:55.977Z,1520662555.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-03-10T06:15:55.978Z,1520662555.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:15:56.374Z,1520662556.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-03-10T06:15:56.374Z,1520662556.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:15:56.773Z,1520662556.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-03-10T06:15:56.774Z,1520662556.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:15:57.174Z,1520662557.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-03-10T06:15:57.175Z,1520662557.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:15:57.604Z,1520662557.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-03-10T06:15:57.605Z,1520662557.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:15:58.018Z,1520662558.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-03-10T06:15:58.023Z,1520662558.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:15:58.410Z,1520662558.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-03-10T06:15:58.412Z,1520662558.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:15:58.785Z,1520662558.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-03-10T06:15:58.785Z,1520662558.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:15:59.215Z,1520662559.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2018-03-10T06:15:59.216Z,1520662559.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:15:59.585Z,1520662559.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2018-03-10T06:15:59.586Z,1520662559.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:15:59.986Z,1520662559.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2018-03-10T06:15:59.987Z,1520662559.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:16:00.390Z,1520662560.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2018-03-10T06:16:00.391Z,1520662560.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:16:00.790Z,1520662560.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:16:01.192Z,1520662561.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:16:01.575Z,1520662561.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:16:01.985Z,1520662561.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:16:02.385Z,1520662562.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:16:02.778Z,1520662562.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:16:03.178Z,1520662563.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:16:03.589Z,1520662563.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:16:03.989Z,1520662563.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:16:04.397Z,1520662564.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:16:04.777Z,1520662564.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:16:05.178Z,1520662565.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:16:05.579Z,1520662565.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:16:05.984Z,1520662565.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:16:06.391Z,1520662566.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:16:06.815Z,1520662566.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:16:07.197Z,1520662567.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:16:07.585Z,1520662567.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:16:07.990Z,1520662567.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:16:08.389Z,1520662568.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:16:08.785Z,1520662568.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:16:09.180Z,1520662569.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:16:09.601Z,1520662569.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:16:10.001Z,1520662570.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:16:10.393Z,1520662570.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:16:13.492Z,1520662573.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:16:13.496Z,1520662573.496 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-03-10T06:11:13.2Z
2018-03-10T06:16:13.496Z,1520662573.496 [Default:CheckIn:Read_GPS] Stopped
2018-03-10T06:16:13.496Z,1520662573.496 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-03-10T06:16:13.669Z,1520662573.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:16:14.127Z,1520662574.127 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20180310T051512/Courier0024.lzma
2018-03-10T06:16:14.185Z,1520662574.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:16:14.431Z,1520662574.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:16:14.855Z,1520662574.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:16:15.185Z,1520662575.185 [DataOverHttps](INFO): Moved sent file to Logs/20180310T051512/Courier0024.lzma.bak
2018-03-10T06:16:15.186Z,1520662575.186 [DataOverHttps](INFO): SBD MOMSN=8002201
2018-03-10T06:16:15.257Z,1520662575.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:16:15.889Z,1520662575.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:16:16.072Z,1520662576.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:16:16.469Z,1520662576.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:16:19.565Z,1520662579.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:16:19.737Z,1520662579.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:16:20.113Z,1520662580.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:16:20.517Z,1520662580.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:16:20.912Z,1520662580.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:16:21.322Z,1520662581.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:16:21.719Z,1520662581.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:16:24.839Z,1520662584.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:16:25.013Z,1520662585.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:16:25.352Z,1520662585.352 [DataOverHttps](INFO): Sending 168 bytes from file Logs/20180310T051512/Express0025.lzma
2018-03-10T06:16:25.411Z,1520662585.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:16:25.793Z,1520662585.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:16:26.154Z,1520662586.154 [DataOverHttps](INFO): Moved sent file to Logs/20180310T051512/Express0025.lzma.bak
2018-03-10T06:16:26.154Z,1520662586.154 [DataOverHttps](INFO): SBD MOMSN=8002203
2018-03-10T06:16:26.235Z,1520662586.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:16:26.887Z,1520662586.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:16:26.890Z,1520662586.890 [Default:CheckIn:Read_Iridium] Stopped
2018-03-10T06:16:26.890Z,1520662586.890 [Default:CheckIn:C.Wait] Running Loop=1
2018-03-10T06:16:26.890Z,1520662586.890 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-03-10T06:16:27.045Z,1520662587.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:16:27.443Z,1520662587.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:16:30.532Z,1520662590.532 [BPC1](ERROR): Failed to receive battery data
2018-03-10T06:16:30.532Z,1520662590.532 [BPC1] Communications Fault, FailCount= 1
2018-03-10T06:16:30.532Z,1520662590.532 [BPC1](ERROR): Communications Fault
2018-03-10T06:16:30.540Z,1520662590.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:16:30.619Z,1520662590.619 [CBIT](ERROR): Communications Fault in component: BPC1
2018-03-10T06:16:30.686Z,1520662590.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:16:31.105Z,1520662591.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:16:31.497Z,1520662591.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:16:31.583Z,1520662591.583 [CBIT](INFO): Clearing failed state for component BPC1
2018-03-10T06:16:31.583Z,1520662591.583 [BPC1] No Fault, FailCount= 1
2018-03-10T06:16:31.972Z,1520662591.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:16:32.289Z,1520662592.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:16:32.687Z,1520662592.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:16:33.079Z,1520662593.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:16:33.495Z,1520662593.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:16:33.896Z,1520662593.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:16:34.293Z,1520662594.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:16:34.689Z,1520662594.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:16:35.089Z,1520662595.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:16:35.484Z,1520662595.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:16:35.884Z,1520662595.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:16:36.296Z,1520662596.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:16:36.691Z,1520662596.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:16:37.094Z,1520662597.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:16:37.486Z,1520662597.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:16:37.893Z,1520662597.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:16:38.301Z,1520662598.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:16:38.696Z,1520662598.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:16:39.091Z,1520662599.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:16:39.485Z,1520662599.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:16:39.889Z,1520662599.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:16:40.292Z,1520662600.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:16:40.697Z,1520662600.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:16:41.096Z,1520662601.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:16:41.485Z,1520662601.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:16:41.932Z,1520662601.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:16:42.296Z,1520662602.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:16:42.686Z,1520662602.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:16:43.086Z,1520662603.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:16:43.473Z,1520662603.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:16:43.871Z,1520662603.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:16:44.287Z,1520662604.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:16:44.690Z,1520662604.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:16:45.103Z,1520662605.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:16:45.477Z,1520662605.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:16:45.884Z,1520662605.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:16:46.303Z,1520662606.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:16:46.706Z,1520662606.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:16:47.105Z,1520662607.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:16:47.479Z,1520662607.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:16:47.878Z,1520662607.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:16:48.307Z,1520662608.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:16:48.704Z,1520662608.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:16:49.107Z,1520662609.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:16:49.477Z,1520662609.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:16:49.929Z,1520662609.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:16:50.304Z,1520662610.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:16:50.708Z,1520662610.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:16:51.102Z,1520662611.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:16:51.479Z,1520662611.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:16:51.878Z,1520662611.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:16:52.304Z,1520662612.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:16:52.706Z,1520662612.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:16:53.106Z,1520662613.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:16:53.485Z,1520662613.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:16:53.883Z,1520662613.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:16:54.305Z,1520662614.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:16:54.706Z,1520662614.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:16:55.106Z,1520662615.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:16:55.477Z,1520662615.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:16:55.878Z,1520662615.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:16:56.306Z,1520662616.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:16:56.706Z,1520662616.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:16:57.105Z,1520662617.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:16:57.477Z,1520662617.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:16:57.884Z,1520662617.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:16:58.300Z,1520662618.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:16:58.705Z,1520662618.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:16:59.106Z,1520662619.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:16:59.477Z,1520662619.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:16:59.877Z,1520662619.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:17:00.307Z,1520662620.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:17:00.684Z,1520662620.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:17:01.106Z,1520662621.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:17:01.478Z,1520662621.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:17:01.877Z,1520662621.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:17:02.284Z,1520662622.284 [BPC1](FAULT): Failed to initialize
2018-03-10T06:17:02.284Z,1520662622.284 [BPC1] Communications Fault, FailCount= 2
2018-03-10T06:17:02.285Z,1520662622.285 [BPC1](ERROR): Communications Fault
2018-03-10T06:17:02.317Z,1520662622.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:17:02.403Z,1520662622.403 [CBIT](ERROR): Communications Fault in component: BPC1
2018-03-10T06:17:02.690Z,1520662622.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:17:03.090Z,1520662623.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:17:03.485Z,1520662623.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:17:03.584Z,1520662623.584 [CBIT](INFO): Clearing failed state for component BPC1
2018-03-10T06:17:03.584Z,1520662623.584 [BPC1] No Fault, FailCount= 2
2018-03-10T06:17:03.921Z,1520662623.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:17:04.283Z,1520662624.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:17:04.690Z,1520662624.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:17:05.109Z,1520662625.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:17:05.507Z,1520662625.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:17:05.881Z,1520662625.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:17:06.282Z,1520662626.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:17:06.682Z,1520662626.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:17:07.086Z,1520662627.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:17:07.481Z,1520662627.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:17:07.910Z,1520662627.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:17:08.308Z,1520662628.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:17:08.707Z,1520662628.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:17:09.087Z,1520662629.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:17:09.481Z,1520662629.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:17:09.881Z,1520662629.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:17:10.285Z,1520662630.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:17:10.686Z,1520662630.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:17:11.109Z,1520662631.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:17:11.485Z,1520662631.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:17:11.881Z,1520662631.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:17:12.309Z,1520662632.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:17:12.683Z,1520662632.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:17:13.108Z,1520662633.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:17:13.482Z,1520662633.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:17:13.912Z,1520662633.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:17:14.309Z,1520662634.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:17:14.707Z,1520662634.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:17:15.107Z,1520662635.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:17:15.483Z,1520662635.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:17:15.882Z,1520662635.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:17:16.308Z,1520662636.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:17:16.687Z,1520662636.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:17:17.088Z,1520662637.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:17:17.482Z,1520662637.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:17:17.882Z,1520662637.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:17:18.309Z,1520662638.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:17:18.687Z,1520662638.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:17:19.087Z,1520662639.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:17:19.481Z,1520662639.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:17:19.881Z,1520662639.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:17:20.309Z,1520662640.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:17:20.708Z,1520662640.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:17:21.109Z,1520662641.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:17:21.481Z,1520662641.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:17:21.882Z,1520662641.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:17:22.283Z,1520662642.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:17:22.686Z,1520662642.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:17:23.087Z,1520662643.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:17:23.481Z,1520662643.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:17:23.881Z,1520662643.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:17:24.287Z,1520662644.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:17:24.708Z,1520662644.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:17:25.087Z,1520662645.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:17:25.483Z,1520662645.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:17:25.882Z,1520662645.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:17:26.287Z,1520662646.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:17:26.709Z,1520662646.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:17:27.083Z,1520662647.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:17:27.483Z,1520662647.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:17:30.589Z,1520662650.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:17:30.766Z,1520662650.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:17:31.174Z,1520662651.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:17:31.571Z,1520662651.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:17:31.963Z,1520662651.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:17:32.364Z,1520662652.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:17:32.764Z,1520662652.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:17:33.166Z,1520662653.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:17:33.573Z,1520662653.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:17:33.963Z,1520662653.963 [BPC1](FAULT): Failed to initialize
2018-03-10T06:17:33.963Z,1520662653.963 [BPC1] Communications Fault, FailCount= 3
2018-03-10T06:17:33.963Z,1520662653.963 [BPC1](ERROR): Communications Fault
2018-03-10T06:17:33.972Z,1520662653.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:17:34.047Z,1520662654.047 [CBIT](ERROR): Communications Fault in component: BPC1
2018-03-10T06:17:34.369Z,1520662654.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:17:34.769Z,1520662654.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:17:35.145Z,1520662655.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:17:35.239Z,1520662655.239 [CBIT](INFO): Clearing failed state for component BPC1
2018-03-10T06:17:35.239Z,1520662655.239 [BPC1] No Fault, FailCount= 3
2018-03-10T06:17:35.620Z,1520662655.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:17:35.946Z,1520662655.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:17:36.374Z,1520662656.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:17:36.776Z,1520662656.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:17:37.173Z,1520662657.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:17:37.542Z,1520662657.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:17:37.945Z,1520662657.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:17:38.370Z,1520662658.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:17:38.745Z,1520662658.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:17:39.169Z,1520662659.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:17:39.577Z,1520662659.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:17:39.974Z,1520662659.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:17:40.379Z,1520662660.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:17:40.753Z,1520662660.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:17:41.144Z,1520662661.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:17:41.550Z,1520662661.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:17:41.949Z,1520662661.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:17:42.358Z,1520662662.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:17:42.777Z,1520662662.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:17:43.178Z,1520662663.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:17:43.544Z,1520662663.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:17:43.957Z,1520662663.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:17:44.353Z,1520662664.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:17:44.750Z,1520662664.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:17:45.154Z,1520662665.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:17:45.589Z,1520662665.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:17:46.028Z,1520662666.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:17:46.357Z,1520662666.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:17:46.771Z,1520662666.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:17:47.193Z,1520662667.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:17:47.553Z,1520662667.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:17:47.965Z,1520662667.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:17:48.366Z,1520662668.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:17:48.766Z,1520662668.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:17:49.176Z,1520662669.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:17:49.557Z,1520662669.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:17:49.959Z,1520662669.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:17:50.368Z,1520662670.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:17:50.771Z,1520662670.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:17:51.146Z,1520662671.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:17:51.566Z,1520662671.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:17:51.973Z,1520662671.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:17:52.366Z,1520662672.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:17:52.770Z,1520662672.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:17:53.146Z,1520662673.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:17:53.569Z,1520662673.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:17:53.945Z,1520662673.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:17:54.368Z,1520662674.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:17:54.770Z,1520662674.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:17:55.168Z,1520662675.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:17:55.547Z,1520662675.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:17:55.969Z,1520662675.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:17:56.345Z,1520662676.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:17:56.746Z,1520662676.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:17:57.145Z,1520662677.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:17:57.574Z,1520662677.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:17:57.975Z,1520662677.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:17:58.374Z,1520662678.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:17:58.773Z,1520662678.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:17:59.144Z,1520662679.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:17:59.553Z,1520662679.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:17:59.950Z,1520662679.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:18:00.358Z,1520662680.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:18:00.774Z,1520662680.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:18:01.178Z,1520662681.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:18:01.545Z,1520662681.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:18:01.952Z,1520662681.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:18:02.349Z,1520662682.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:18:02.746Z,1520662682.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:18:03.150Z,1520662683.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:18:03.578Z,1520662683.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:18:03.979Z,1520662683.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:18:04.378Z,1520662684.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:18:04.750Z,1520662684.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:18:05.147Z,1520662685.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:18:05.546Z,1520662685.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:18:05.998Z,1520662685.998 [BPC1](FAULT): Failed to initialize
2018-03-10T06:18:05.998Z,1520662685.998 [BPC1] Communications Fault, FailCount= 4
2018-03-10T06:18:05.998Z,1520662685.998 [BPC1](ERROR): Communications Fault
2018-03-10T06:18:06.006Z,1520662686.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:18:06.099Z,1520662686.099 [CBIT](ERROR): Communications Fault in component: BPC1
2018-03-10T06:18:06.358Z,1520662686.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:18:06.806Z,1520662686.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:18:07.158Z,1520662687.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:18:07.235Z,1520662687.235 [CBIT](INFO): Clearing failed state for component BPC1
2018-03-10T06:18:07.235Z,1520662687.235 [BPC1] No Fault, FailCount= 4
2018-03-10T06:18:07.590Z,1520662687.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:18:07.957Z,1520662687.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:18:08.359Z,1520662688.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:18:08.757Z,1520662688.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:18:09.161Z,1520662689.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:18:09.566Z,1520662689.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:18:09.969Z,1520662689.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:18:10.373Z,1520662690.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:18:10.761Z,1520662690.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:18:11.156Z,1520662691.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:18:11.556Z,1520662691.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:18:11.956Z,1520662691.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:18:12.364Z,1520662692.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:18:12.769Z,1520662692.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:18:13.166Z,1520662693.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:18:13.558Z,1520662693.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:18:13.960Z,1520662693.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:18:14.355Z,1520662694.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:18:14.759Z,1520662694.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:18:15.159Z,1520662695.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:18:15.566Z,1520662695.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:18:15.972Z,1520662695.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:18:16.367Z,1520662696.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:18:16.763Z,1520662696.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:18:17.157Z,1520662697.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:18:17.554Z,1520662697.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:18:17.955Z,1520662697.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:18:18.376Z,1520662698.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:18:18.770Z,1520662698.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:18:19.165Z,1520662699.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:18:19.552Z,1520662699.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:18:19.956Z,1520662699.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:18:20.355Z,1520662700.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:18:20.755Z,1520662700.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:18:21.152Z,1520662701.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:18:21.566Z,1520662701.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:18:21.962Z,1520662701.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:18:22.362Z,1520662702.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:18:22.765Z,1520662702.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:18:23.159Z,1520662703.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:18:23.558Z,1520662703.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:18:23.959Z,1520662703.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:18:24.364Z,1520662704.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:18:24.770Z,1520662704.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:18:25.167Z,1520662705.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:18:25.564Z,1520662705.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:18:26.001Z,1520662706.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:18:26.357Z,1520662706.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:18:26.761Z,1520662706.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:18:27.157Z,1520662707.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:18:27.567Z,1520662707.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:18:30.706Z,1520662710.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:18:30.885Z,1520662710.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:18:31.268Z,1520662711.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:18:31.669Z,1520662711.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:18:32.063Z,1520662712.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:18:32.466Z,1520662712.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:18:32.872Z,1520662712.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:18:33.268Z,1520662713.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:18:33.659Z,1520662713.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:18:34.061Z,1520662714.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:18:34.458Z,1520662714.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:18:34.862Z,1520662714.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:18:35.245Z,1520662715.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:18:35.664Z,1520662715.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:18:36.073Z,1520662716.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:18:36.476Z,1520662716.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:18:36.841Z,1520662716.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:18:37.245Z,1520662717.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:18:37.661Z,1520662717.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:18:38.046Z,1520662718.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:18:38.475Z,1520662718.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:18:38.888Z,1520662718.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:18:39.266Z,1520662719.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:18:39.669Z,1520662719.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:18:40.075Z,1520662720.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:18:40.446Z,1520662720.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:18:40.847Z,1520662720.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:18:41.248Z,1520662721.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:18:41.670Z,1520662721.670 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:18:41.670Z,1520662721.670 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 21
2018-03-10T06:18:41.670Z,1520662721.670 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-03-10T06:18:41.672Z,1520662721.672 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:18:41.672Z,1520662721.672 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 21
2018-03-10T06:18:41.672Z,1520662721.672 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-03-10T06:18:41.674Z,1520662721.674 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:18:41.674Z,1520662721.674 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 21
2018-03-10T06:18:41.674Z,1520662721.674 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-10T06:18:41.759Z,1520662721.759 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-03-10T06:18:41.759Z,1520662721.759 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-03-10T06:18:41.760Z,1520662721.760 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-10T06:18:42.160Z,1520662722.160 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-03-10T06:18:42.160Z,1520662722.160 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 21
2018-03-10T06:18:42.161Z,1520662722.161 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-03-10T06:18:42.161Z,1520662722.161 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 21
2018-03-10T06:18:42.161Z,1520662722.161 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-10T06:18:42.161Z,1520662722.161 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 21
2018-03-10T06:18:42.481Z,1520662722.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-03-10T06:18:42.481Z,1520662722.481 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-03-10T06:18:42.482Z,1520662722.482 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-03-10T06:18:42.482Z,1520662722.482 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-03-10T06:18:42.483Z,1520662722.483 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-03-10T06:18:42.483Z,1520662722.483 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-03-10T06:18:42.483Z,1520662722.483 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-10T06:18:42.484Z,1520662722.484 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-10T06:18:42.484Z,1520662722.484 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-10T06:18:42.874Z,1520662722.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-03-10T06:18:42.875Z,1520662722.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:18:43.253Z,1520662723.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-03-10T06:18:43.254Z,1520662723.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:18:43.651Z,1520662723.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-03-10T06:18:43.652Z,1520662723.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:18:44.055Z,1520662724.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-03-10T06:18:44.056Z,1520662724.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:18:44.458Z,1520662724.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-03-10T06:18:44.459Z,1520662724.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:18:44.858Z,1520662724.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-03-10T06:18:44.859Z,1520662724.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:18:45.258Z,1520662725.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-03-10T06:18:45.259Z,1520662725.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:18:45.655Z,1520662725.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-03-10T06:18:45.656Z,1520662725.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:18:46.055Z,1520662726.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-03-10T06:18:46.056Z,1520662726.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:18:46.456Z,1520662726.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-03-10T06:18:46.457Z,1520662726.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:18:46.855Z,1520662726.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-03-10T06:18:46.856Z,1520662726.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:18:47.260Z,1520662727.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-03-10T06:18:47.261Z,1520662727.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:18:47.664Z,1520662727.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-03-10T06:18:47.665Z,1520662727.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:18:48.058Z,1520662728.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-03-10T06:18:48.059Z,1520662728.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:18:48.459Z,1520662728.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-03-10T06:18:48.460Z,1520662728.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:18:48.853Z,1520662728.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-03-10T06:18:48.854Z,1520662728.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:18:49.253Z,1520662729.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-03-10T06:18:49.254Z,1520662729.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:18:49.656Z,1520662729.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-03-10T06:18:49.657Z,1520662729.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:18:50.053Z,1520662730.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-03-10T06:18:50.054Z,1520662730.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:18:50.459Z,1520662730.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-03-10T06:18:50.460Z,1520662730.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:18:50.899Z,1520662730.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-03-10T06:18:50.899Z,1520662730.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:18:51.292Z,1520662731.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-03-10T06:18:51.293Z,1520662731.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:18:51.653Z,1520662731.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-03-10T06:18:51.654Z,1520662731.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:18:52.057Z,1520662732.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-03-10T06:18:52.057Z,1520662732.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:18:52.454Z,1520662732.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-03-10T06:18:52.456Z,1520662732.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:18:52.854Z,1520662732.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-03-10T06:18:52.855Z,1520662732.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:18:53.254Z,1520662733.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-03-10T06:18:53.254Z,1520662733.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:18:53.663Z,1520662733.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-03-10T06:18:53.664Z,1520662733.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:18:54.089Z,1520662734.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-03-10T06:18:54.090Z,1520662734.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:18:54.468Z,1520662734.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-03-10T06:18:54.469Z,1520662734.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:18:54.853Z,1520662734.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-03-10T06:18:54.854Z,1520662734.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:18:55.253Z,1520662735.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-03-10T06:18:55.254Z,1520662735.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:18:55.651Z,1520662735.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-03-10T06:18:55.652Z,1520662735.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:18:56.052Z,1520662736.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-03-10T06:18:56.053Z,1520662736.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:18:56.462Z,1520662736.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-03-10T06:18:56.463Z,1520662736.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:18:56.917Z,1520662736.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-03-10T06:18:56.918Z,1520662736.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:18:57.268Z,1520662737.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-03-10T06:18:57.269Z,1520662737.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:18:57.653Z,1520662737.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-03-10T06:18:57.654Z,1520662737.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:18:58.050Z,1520662738.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-03-10T06:18:58.051Z,1520662738.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:18:58.460Z,1520662738.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-03-10T06:18:58.461Z,1520662738.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:18:58.855Z,1520662738.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-03-10T06:18:58.856Z,1520662738.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:18:59.255Z,1520662739.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-03-10T06:18:59.256Z,1520662739.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:18:59.663Z,1520662739.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-03-10T06:18:59.664Z,1520662739.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:19:00.062Z,1520662740.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2018-03-10T06:19:00.063Z,1520662740.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:19:00.462Z,1520662740.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2018-03-10T06:19:00.463Z,1520662740.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:19:00.860Z,1520662740.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2018-03-10T06:19:00.861Z,1520662740.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:19:01.257Z,1520662741.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2018-03-10T06:19:01.258Z,1520662741.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:19:01.653Z,1520662741.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 20.0 s old, using for 20.0 s.
2018-03-10T06:19:01.654Z,1520662741.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:19:02.060Z,1520662742.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:19:02.463Z,1520662742.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:19:02.882Z,1520662742.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:19:03.266Z,1520662743.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:19:03.662Z,1520662743.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:19:04.066Z,1520662744.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:19:04.458Z,1520662744.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:19:04.861Z,1520662744.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:19:05.261Z,1520662745.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:19:05.677Z,1520662745.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:19:06.068Z,1520662746.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:19:06.473Z,1520662746.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:19:06.858Z,1520662746.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:19:07.259Z,1520662747.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:19:07.659Z,1520662747.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:19:08.059Z,1520662748.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:19:08.466Z,1520662748.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:19:08.878Z,1520662748.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:19:09.262Z,1520662749.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:19:09.655Z,1520662749.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:19:10.056Z,1520662750.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:19:10.458Z,1520662750.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:19:10.859Z,1520662750.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:19:11.256Z,1520662751.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:19:11.667Z,1520662751.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:19:12.067Z,1520662752.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:19:12.476Z,1520662752.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:19:12.859Z,1520662752.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:19:13.255Z,1520662753.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:19:13.664Z,1520662753.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:19:14.057Z,1520662754.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:19:14.467Z,1520662754.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:19:14.863Z,1520662754.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:19:15.263Z,1520662755.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:19:15.657Z,1520662755.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:19:16.062Z,1520662756.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:19:16.483Z,1520662756.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:19:16.865Z,1520662756.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:19:17.262Z,1520662757.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:19:17.671Z,1520662757.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:19:18.066Z,1520662758.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:19:18.476Z,1520662758.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:19:18.858Z,1520662758.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:19:19.261Z,1520662759.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:19:19.672Z,1520662759.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:19:20.066Z,1520662760.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:19:20.473Z,1520662760.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:19:20.876Z,1520662760.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:19:21.264Z,1520662761.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:19:21.646Z,1520662761.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:19:22.048Z,1520662762.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:19:22.442Z,1520662762.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:19:22.846Z,1520662762.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:19:23.246Z,1520662763.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:19:23.668Z,1520662763.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:19:24.069Z,1520662764.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:19:24.474Z,1520662764.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:19:24.846Z,1520662764.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:19:25.246Z,1520662765.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:19:25.647Z,1520662765.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:19:26.045Z,1520662766.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:19:26.469Z,1520662766.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:19:26.870Z,1520662766.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:19:27.270Z,1520662767.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:19:27.675Z,1520662767.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:19:30.799Z,1520662770.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:19:30.985Z,1520662770.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:19:31.374Z,1520662771.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:19:31.772Z,1520662771.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:19:32.185Z,1520662772.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:19:32.577Z,1520662772.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:19:32.953Z,1520662772.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:19:33.357Z,1520662773.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:19:33.757Z,1520662773.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:19:34.161Z,1520662774.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:19:34.581Z,1520662774.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:19:34.982Z,1520662774.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:19:35.389Z,1520662775.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:19:35.761Z,1520662775.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:19:36.153Z,1520662776.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:19:36.555Z,1520662776.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:19:36.954Z,1520662776.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:19:37.383Z,1520662777.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:19:37.787Z,1520662777.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:19:38.185Z,1520662778.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:19:38.557Z,1520662778.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:19:38.958Z,1520662778.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:19:39.358Z,1520662779.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:19:39.765Z,1520662779.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:19:40.158Z,1520662780.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:19:40.564Z,1520662780.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:19:40.963Z,1520662780.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:19:41.390Z,1520662781.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:19:41.773Z,1520662781.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:19:42.159Z,1520662782.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:19:42.561Z,1520662782.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:19:42.965Z,1520662782.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:19:43.369Z,1520662783.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:19:43.800Z,1520662783.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:19:44.166Z,1520662784.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:19:44.560Z,1520662784.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:19:44.962Z,1520662784.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:19:45.411Z,1520662785.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:19:45.810Z,1520662785.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:19:46.160Z,1520662786.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:19:46.675Z,1520662786.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:19:47.075Z,1520662787.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:19:47.468Z,1520662787.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:19:47.818Z,1520662787.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:19:48.185Z,1520662788.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:19:48.623Z,1520662788.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:19:48.980Z,1520662788.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:19:49.369Z,1520662789.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:19:49.773Z,1520662789.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:19:50.173Z,1520662790.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:19:50.592Z,1520662790.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:19:50.986Z,1520662790.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:19:51.349Z,1520662791.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:19:51.766Z,1520662791.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:19:52.166Z,1520662792.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:19:52.597Z,1520662792.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:19:52.996Z,1520662792.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:19:53.368Z,1520662793.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:19:53.760Z,1520662793.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:19:54.157Z,1520662794.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:19:54.565Z,1520662794.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:19:54.960Z,1520662794.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:19:55.389Z,1520662795.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:19:55.791Z,1520662795.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:19:56.187Z,1520662796.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:19:56.558Z,1520662796.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:19:56.964Z,1520662796.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:19:57.353Z,1520662797.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:19:57.758Z,1520662797.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:19:58.154Z,1520662798.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:19:58.569Z,1520662798.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:19:58.969Z,1520662798.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:19:59.368Z,1520662799.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:19:59.759Z,1520662799.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:20:00.157Z,1520662800.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:20:00.561Z,1520662800.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:20:00.959Z,1520662800.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:20:01.369Z,1520662801.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:20:01.769Z,1520662801.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:20:02.173Z,1520662802.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:20:02.557Z,1520662802.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:20:02.961Z,1520662802.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:20:03.356Z,1520662803.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:20:03.764Z,1520662803.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:20:04.169Z,1520662804.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:20:04.570Z,1520662804.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:20:04.969Z,1520662804.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:20:05.371Z,1520662805.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:20:05.766Z,1520662805.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:20:06.185Z,1520662806.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:20:06.560Z,1520662806.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:20:06.960Z,1520662806.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:20:07.371Z,1520662807.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:20:07.766Z,1520662807.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:20:08.171Z,1520662808.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:20:08.559Z,1520662808.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:20:08.964Z,1520662808.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:20:09.359Z,1520662809.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:20:09.760Z,1520662809.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:20:10.162Z,1520662810.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:20:10.570Z,1520662810.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:20:10.970Z,1520662810.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:20:11.371Z,1520662811.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:20:11.759Z,1520662811.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:20:12.165Z,1520662812.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:20:12.560Z,1520662812.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:20:12.961Z,1520662812.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:20:13.371Z,1520662813.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:20:13.777Z,1520662813.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:20:14.171Z,1520662814.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:20:14.560Z,1520662814.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:20:14.963Z,1520662814.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:20:15.366Z,1520662815.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:20:15.777Z,1520662815.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:20:16.169Z,1520662816.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:20:16.572Z,1520662816.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:20:16.973Z,1520662816.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:20:17.378Z,1520662817.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:20:17.768Z,1520662817.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:20:18.164Z,1520662818.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:20:18.561Z,1520662818.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:20:18.965Z,1520662818.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:20:19.371Z,1520662819.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:20:19.772Z,1520662819.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:20:20.170Z,1520662820.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:20:20.563Z,1520662820.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:20:20.968Z,1520662820.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:20:21.363Z,1520662821.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:20:21.765Z,1520662821.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:20:22.163Z,1520662822.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:20:22.571Z,1520662822.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:20:22.970Z,1520662822.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:20:23.376Z,1520662823.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:20:23.764Z,1520662823.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:20:24.164Z,1520662824.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:20:24.561Z,1520662824.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:20:24.963Z,1520662824.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:20:25.372Z,1520662825.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:20:25.774Z,1520662825.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:20:26.171Z,1520662826.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:20:26.564Z,1520662826.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:20:26.969Z,1520662826.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:20:27.373Z,1520662827.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:20:27.768Z,1520662827.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:20:30.967Z,1520662830.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:20:31.133Z,1520662831.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:20:31.531Z,1520662831.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:20:31.942Z,1520662831.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:20:32.313Z,1520662832.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:20:32.766Z,1520662832.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:20:33.105Z,1520662833.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:20:33.519Z,1520662833.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:20:33.926Z,1520662833.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:20:34.317Z,1520662834.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:20:34.766Z,1520662834.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:20:35.106Z,1520662835.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:20:35.506Z,1520662835.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:20:35.913Z,1520662835.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:20:36.319Z,1520662836.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:20:36.748Z,1520662836.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:20:37.125Z,1520662837.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:20:37.519Z,1520662837.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:20:37.918Z,1520662837.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:20:38.332Z,1520662838.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:20:38.759Z,1520662838.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:20:39.126Z,1520662839.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:20:39.515Z,1520662839.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:20:39.925Z,1520662839.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:20:40.336Z,1520662840.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:20:40.733Z,1520662840.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:20:41.127Z,1520662841.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:20:41.524Z,1520662841.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:20:41.921Z,1520662841.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:20:42.337Z,1520662842.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:20:42.735Z,1520662842.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:20:43.119Z,1520662843.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:20:43.527Z,1520662843.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:20:43.933Z,1520662843.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:20:44.333Z,1520662844.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:20:44.719Z,1520662844.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:20:45.124Z,1520662845.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:20:45.520Z,1520662845.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:20:45.918Z,1520662845.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:20:46.331Z,1520662846.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:20:46.729Z,1520662846.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:20:47.127Z,1520662847.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:20:47.525Z,1520662847.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:20:47.921Z,1520662847.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:20:48.333Z,1520662848.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:20:48.737Z,1520662848.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:20:49.133Z,1520662849.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:20:49.523Z,1520662849.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:20:49.928Z,1520662849.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:20:50.333Z,1520662850.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:20:50.714Z,1520662850.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:20:51.143Z,1520662851.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:20:51.510Z,1520662851.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:20:51.913Z,1520662851.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:20:52.339Z,1520662852.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:20:52.743Z,1520662852.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:20:53.119Z,1520662853.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:20:53.515Z,1520662853.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:20:53.918Z,1520662853.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:20:54.345Z,1520662854.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:20:54.719Z,1520662854.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:20:55.118Z,1520662855.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:20:55.514Z,1520662855.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:20:55.914Z,1520662855.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:20:56.325Z,1520662856.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:20:56.749Z,1520662856.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:20:57.123Z,1520662857.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:20:57.514Z,1520662857.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:20:57.913Z,1520662857.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:20:58.329Z,1520662858.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:20:58.722Z,1520662858.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:20:59.121Z,1520662859.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:20:59.518Z,1520662859.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:20:59.921Z,1520662859.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:21:00.329Z,1520662860.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:21:00.721Z,1520662860.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:21:01.129Z,1520662861.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:21:01.514Z,1520662861.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:21:01.915Z,1520662861.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:21:02.322Z,1520662862.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:21:02.721Z,1520662862.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:21:03.123Z,1520662863.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:21:03.517Z,1520662863.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:21:03.916Z,1520662863.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:21:04.323Z,1520662864.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:21:04.722Z,1520662864.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:21:05.128Z,1520662865.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:21:05.537Z,1520662865.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:21:05.916Z,1520662865.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:21:06.326Z,1520662866.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:21:06.727Z,1520662866.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:21:07.126Z,1520662867.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:21:07.515Z,1520662867.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:21:07.917Z,1520662867.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:21:08.326Z,1520662868.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:21:08.727Z,1520662868.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:21:09.133Z,1520662869.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:21:09.537Z,1520662869.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:21:09.916Z,1520662869.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:21:10.328Z,1520662870.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:21:10.723Z,1520662870.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:21:11.122Z,1520662871.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:21:11.516Z,1520662871.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:21:11.921Z,1520662871.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:21:12.333Z,1520662872.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:21:12.727Z,1520662872.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:21:13.133Z,1520662873.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:21:13.514Z,1520662873.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:21:13.918Z,1520662873.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:21:14.333Z,1520662874.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:21:14.726Z,1520662874.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:21:15.126Z,1520662875.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:21:15.521Z,1520662875.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:21:15.925Z,1520662875.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:21:16.314Z,1520662876.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:21:16.724Z,1520662876.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:21:17.133Z,1520662877.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:21:17.527Z,1520662877.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:21:17.925Z,1520662877.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:21:18.325Z,1520662878.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:21:18.721Z,1520662878.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:21:19.117Z,1520662879.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:21:19.518Z,1520662879.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:21:19.917Z,1520662879.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:21:20.327Z,1520662880.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:21:20.726Z,1520662880.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:21:21.126Z,1520662881.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:21:21.521Z,1520662881.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:21:21.933Z,1520662881.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:21:22.322Z,1520662882.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:21:22.719Z,1520662882.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:21:23.116Z,1520662883.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:21:23.529Z,1520662883.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:21:23.937Z,1520662883.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:21:24.329Z,1520662884.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:21:24.718Z,1520662884.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:21:25.117Z,1520662885.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:21:25.519Z,1520662885.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:21:25.918Z,1520662885.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:21:26.328Z,1520662886.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:21:26.727Z,1520662886.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:21:27.133Z,1520662887.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:21:27.136Z,1520662887.136 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-03-10T06:21:27.136Z,1520662887.136 [Default:CheckIn:C.Wait] Stopped
2018-03-10T06:21:27.136Z,1520662887.136 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-03-10T06:21:27.137Z,1520662887.137 [Default:CheckIn:D] Running Loop=1
2018-03-10T06:21:27.514Z,1520662887.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:21:27.517Z,1520662887.517 [Default:CheckIn:D] Stopped
2018-03-10T06:21:27.517Z,1520662887.517 [Default:CheckIn:E] Running Loop=1
2018-03-10T06:21:27.913Z,1520662887.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:21:27.917Z,1520662887.917 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 62.159932 min 
2018-03-10T06:21:27.917Z,1520662887.917 [Default:CheckIn:E] Stopped
2018-03-10T06:21:27.917Z,1520662887.917 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-03-10T06:21:27.917Z,1520662887.917 [Default:CheckIn] Stopped
2018-03-10T06:21:27.917Z,1520662887.917 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-03-10T06:21:27.917Z,1520662887.917 [Default:CheckIn](INFO): Running loop #7
2018-03-10T06:21:27.917Z,1520662887.917 [Default:CheckIn] Running Loop=7
2018-03-10T06:21:27.917Z,1520662887.917 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-03-10T06:21:27.918Z,1520662887.918 [Default:CheckIn:Read_GPS] Running Loop=1
2018-03-10T06:21:31.036Z,1520662891.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:21:31.196Z,1520662891.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:21:31.591Z,1520662891.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:21:31.997Z,1520662891.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:21:32.396Z,1520662892.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:21:32.781Z,1520662892.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:21:33.178Z,1520662893.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:21:33.585Z,1520662893.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:21:33.978Z,1520662893.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:21:34.401Z,1520662894.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:21:34.805Z,1520662894.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:21:35.187Z,1520662895.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:21:35.585Z,1520662895.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:21:35.985Z,1520662895.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:21:36.379Z,1520662896.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:21:36.778Z,1520662896.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:21:37.185Z,1520662897.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:21:37.584Z,1520662897.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:21:37.990Z,1520662897.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:21:38.388Z,1520662898.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:21:38.785Z,1520662898.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:21:39.186Z,1520662899.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:21:39.579Z,1520662899.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:21:39.977Z,1520662899.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:21:40.388Z,1520662900.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:21:40.791Z,1520662900.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:21:41.187Z,1520662901.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:21:41.585Z,1520662901.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:21:41.962Z,1520662901.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:21:42.392Z,1520662902.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:21:42.797Z,1520662902.797 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:21:42.797Z,1520662902.797 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 22
2018-03-10T06:21:42.797Z,1520662902.797 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-03-10T06:21:42.799Z,1520662902.799 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:21:42.799Z,1520662902.799 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 22
2018-03-10T06:21:42.799Z,1520662902.799 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-03-10T06:21:42.801Z,1520662902.801 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:21:42.801Z,1520662902.801 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 22
2018-03-10T06:21:42.801Z,1520662902.801 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-10T06:21:42.879Z,1520662902.879 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-03-10T06:21:42.879Z,1520662902.879 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-03-10T06:21:42.879Z,1520662902.879 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-10T06:21:43.255Z,1520662903.255 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-03-10T06:21:43.255Z,1520662903.255 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 22
2018-03-10T06:21:43.256Z,1520662903.256 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-03-10T06:21:43.256Z,1520662903.256 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 22
2018-03-10T06:21:43.256Z,1520662903.256 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-10T06:21:43.256Z,1520662903.256 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 22
2018-03-10T06:21:43.590Z,1520662903.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-03-10T06:21:43.590Z,1520662903.590 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-03-10T06:21:43.590Z,1520662903.590 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-03-10T06:21:43.591Z,1520662903.591 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-03-10T06:21:43.591Z,1520662903.591 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-03-10T06:21:43.592Z,1520662903.592 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-03-10T06:21:43.592Z,1520662903.592 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-10T06:21:43.592Z,1520662903.592 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-10T06:21:43.593Z,1520662903.593 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-10T06:21:43.985Z,1520662903.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-03-10T06:21:43.986Z,1520662903.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:21:44.403Z,1520662904.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-03-10T06:21:44.404Z,1520662904.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:21:44.774Z,1520662904.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-03-10T06:21:44.775Z,1520662904.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:21:45.214Z,1520662905.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-03-10T06:21:45.214Z,1520662905.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:21:45.582Z,1520662905.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-03-10T06:21:45.603Z,1520662905.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:21:45.988Z,1520662905.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-03-10T06:21:45.989Z,1520662905.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:21:46.393Z,1520662906.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-03-10T06:21:46.394Z,1520662906.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:21:46.797Z,1520662906.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-03-10T06:21:46.798Z,1520662906.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:21:47.204Z,1520662907.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-03-10T06:21:47.205Z,1520662907.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:21:47.585Z,1520662907.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-03-10T06:21:47.586Z,1520662907.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:21:48.014Z,1520662908.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-03-10T06:21:48.015Z,1520662908.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:21:48.381Z,1520662908.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-03-10T06:21:48.382Z,1520662908.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:21:48.782Z,1520662908.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-03-10T06:21:48.782Z,1520662908.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:21:49.204Z,1520662909.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-03-10T06:21:49.205Z,1520662909.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:21:49.609Z,1520662909.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-03-10T06:21:49.609Z,1520662909.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:21:50.008Z,1520662910.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-03-10T06:21:50.009Z,1520662910.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:21:50.378Z,1520662910.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-03-10T06:21:50.379Z,1520662910.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:21:50.773Z,1520662910.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-03-10T06:21:50.774Z,1520662910.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:21:51.174Z,1520662911.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-03-10T06:21:51.174Z,1520662911.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:21:51.574Z,1520662911.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-03-10T06:21:51.575Z,1520662911.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:21:51.974Z,1520662911.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-03-10T06:21:51.975Z,1520662911.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:21:52.378Z,1520662912.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-03-10T06:21:52.380Z,1520662912.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:21:52.777Z,1520662912.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-03-10T06:21:52.778Z,1520662912.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:21:53.178Z,1520662913.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-03-10T06:21:53.179Z,1520662913.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:21:53.584Z,1520662913.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-03-10T06:21:53.585Z,1520662913.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:21:54.011Z,1520662914.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-03-10T06:21:54.012Z,1520662914.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:21:54.373Z,1520662914.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-03-10T06:21:54.374Z,1520662914.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:21:54.776Z,1520662914.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-03-10T06:21:54.777Z,1520662914.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:21:55.180Z,1520662915.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-03-10T06:21:55.181Z,1520662915.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:21:55.582Z,1520662915.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-03-10T06:21:55.584Z,1520662915.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:21:55.985Z,1520662915.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-03-10T06:21:55.986Z,1520662915.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:21:56.388Z,1520662916.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-03-10T06:21:56.389Z,1520662916.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:21:56.773Z,1520662916.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-03-10T06:21:56.774Z,1520662916.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:21:57.174Z,1520662917.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-03-10T06:21:57.174Z,1520662917.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:21:57.577Z,1520662917.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-03-10T06:21:57.577Z,1520662917.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:21:57.973Z,1520662917.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-03-10T06:21:57.974Z,1520662917.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:21:58.401Z,1520662918.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-03-10T06:21:58.401Z,1520662918.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:21:58.796Z,1520662918.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-03-10T06:21:58.797Z,1520662918.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:21:59.187Z,1520662919.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-03-10T06:21:59.188Z,1520662919.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:21:59.596Z,1520662919.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-03-10T06:21:59.597Z,1520662919.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:21:59.994Z,1520662919.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-03-10T06:21:59.996Z,1520662919.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:22:00.384Z,1520662920.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-03-10T06:22:00.385Z,1520662920.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:22:00.767Z,1520662920.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-03-10T06:22:00.768Z,1520662920.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:22:01.172Z,1520662921.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2018-03-10T06:22:01.173Z,1520662921.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:22:01.591Z,1520662921.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2018-03-10T06:22:01.592Z,1520662921.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:22:01.993Z,1520662921.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2018-03-10T06:22:01.994Z,1520662921.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:22:02.395Z,1520662922.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2018-03-10T06:22:02.396Z,1520662922.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:22:02.792Z,1520662922.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 20.0 s old, using for 20.0 s.
2018-03-10T06:22:02.793Z,1520662922.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:22:03.170Z,1520662923.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:22:03.573Z,1520662923.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:22:03.970Z,1520662923.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:22:04.341Z,1520662924.341 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-03-10T06:22:04.341Z,1520662924.341 [NAL9602] Data Fault, FailCount= 2
2018-03-10T06:22:04.341Z,1520662924.341 [NAL9602](ERROR): Data Fault
2018-03-10T06:22:04.405Z,1520662924.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:22:04.495Z,1520662924.495 [CBIT](ERROR): Data Fault in component: NAL9602
2018-03-10T06:22:04.730Z,1520662924.730 [NAL9602](INFO): Powering down
2018-03-10T06:22:04.782Z,1520662924.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:22:05.201Z,1520662925.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:22:05.574Z,1520662925.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:22:05.655Z,1520662925.655 [CBIT](INFO): Clearing failed state for component NAL9602
2018-03-10T06:22:05.655Z,1520662925.655 [NAL9602] No Fault, FailCount= 2
2018-03-10T06:22:05.974Z,1520662925.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:22:06.374Z,1520662926.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:22:06.773Z,1520662926.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:22:07.173Z,1520662927.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:22:07.574Z,1520662927.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:22:07.974Z,1520662927.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:22:08.368Z,1520662928.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:22:08.774Z,1520662928.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:22:09.173Z,1520662929.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:22:09.572Z,1520662929.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:22:09.974Z,1520662929.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:22:10.372Z,1520662930.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:22:10.779Z,1520662930.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:22:11.184Z,1520662931.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:22:11.585Z,1520662931.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:22:11.985Z,1520662931.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:22:12.396Z,1520662932.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:22:12.764Z,1520662932.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:22:13.186Z,1520662933.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:22:13.585Z,1520662933.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:22:13.965Z,1520662933.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:22:14.361Z,1520662934.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:22:14.793Z,1520662934.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:22:15.164Z,1520662935.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:22:15.565Z,1520662935.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:22:15.972Z,1520662935.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:22:16.398Z,1520662936.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:22:16.765Z,1520662936.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:22:17.177Z,1520662937.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:22:17.564Z,1520662937.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:22:17.972Z,1520662937.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:22:18.377Z,1520662938.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:22:18.772Z,1520662938.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:22:19.172Z,1520662939.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:22:19.569Z,1520662939.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:22:19.976Z,1520662939.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:22:20.365Z,1520662940.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:22:20.777Z,1520662940.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:22:21.176Z,1520662941.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:22:21.569Z,1520662941.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:22:21.973Z,1520662941.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:22:22.378Z,1520662942.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:22:22.801Z,1520662942.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:22:23.172Z,1520662943.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:22:23.573Z,1520662943.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:22:23.973Z,1520662943.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:22:24.373Z,1520662944.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:22:24.774Z,1520662944.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:22:25.204Z,1520662945.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:22:25.573Z,1520662945.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:22:25.976Z,1520662945.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:22:26.374Z,1520662946.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:22:26.773Z,1520662946.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:22:27.174Z,1520662947.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:22:27.573Z,1520662947.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:22:27.982Z,1520662947.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:22:31.189Z,1520662951.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:22:31.373Z,1520662951.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:22:31.765Z,1520662951.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:22:32.167Z,1520662952.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:22:32.566Z,1520662952.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:22:32.967Z,1520662952.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:22:33.365Z,1520662953.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:22:33.767Z,1520662953.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:22:34.168Z,1520662954.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:22:34.571Z,1520662954.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:22:34.932Z,1520662954.932 [NAL9602](INFO): Powering up NAL9602
2018-03-10T06:22:35.001Z,1520662955.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:22:35.371Z,1520662955.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:22:35.774Z,1520662955.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:22:36.173Z,1520662956.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:22:36.554Z,1520662956.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:22:36.993Z,1520662956.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:22:37.380Z,1520662957.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:22:37.777Z,1520662957.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:22:38.152Z,1520662958.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:22:38.552Z,1520662958.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:22:38.957Z,1520662958.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:22:39.352Z,1520662959.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:22:39.757Z,1520662959.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:22:40.157Z,1520662960.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:22:40.556Z,1520662960.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:22:40.956Z,1520662960.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:22:41.356Z,1520662961.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:22:41.761Z,1520662961.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:22:42.157Z,1520662962.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:22:42.557Z,1520662962.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:22:42.960Z,1520662962.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:22:43.356Z,1520662963.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:22:43.757Z,1520662963.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:22:44.160Z,1520662964.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:22:44.557Z,1520662964.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:22:44.957Z,1520662964.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:22:45.356Z,1520662965.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:22:45.785Z,1520662965.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:22:46.125Z,1520662966.125 [NAL9602](INFO): NAL9602 initialized
2018-03-10T06:22:46.157Z,1520662966.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:22:46.560Z,1520662966.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:22:47.002Z,1520662967.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:22:47.396Z,1520662967.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:22:47.766Z,1520662967.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:22:48.169Z,1520662968.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:22:48.562Z,1520662968.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:22:48.962Z,1520662968.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:22:49.368Z,1520662969.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:22:49.796Z,1520662969.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:22:50.192Z,1520662970.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:22:50.573Z,1520662970.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:22:50.961Z,1520662970.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:22:51.362Z,1520662971.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:22:51.762Z,1520662971.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:22:52.161Z,1520662972.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:22:52.567Z,1520662972.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:22:52.967Z,1520662972.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:22:53.373Z,1520662973.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:22:53.761Z,1520662973.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:22:54.161Z,1520662974.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:22:54.567Z,1520662974.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:22:54.992Z,1520662974.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:22:55.367Z,1520662975.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:22:55.761Z,1520662975.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:22:56.162Z,1520662976.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:22:56.567Z,1520662976.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:22:56.974Z,1520662976.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:22:57.366Z,1520662977.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:22:57.769Z,1520662977.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:22:58.169Z,1520662978.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:22:58.567Z,1520662978.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:22:58.967Z,1520662978.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:22:59.374Z,1520662979.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:22:59.799Z,1520662979.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:23:00.165Z,1520662980.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:23:00.570Z,1520662980.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:23:00.977Z,1520662980.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:23:01.370Z,1520662981.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:23:01.762Z,1520662981.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:23:02.164Z,1520662982.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:23:02.572Z,1520662982.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:23:03.008Z,1520662983.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:23:03.376Z,1520662983.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:23:03.766Z,1520662983.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:23:04.166Z,1520662984.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:23:04.576Z,1520662984.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:23:04.978Z,1520662984.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:23:05.375Z,1520662985.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:23:05.764Z,1520662985.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:23:06.160Z,1520662986.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:23:06.581Z,1520662986.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:23:06.980Z,1520662986.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:23:07.381Z,1520662987.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:23:07.764Z,1520662987.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:23:08.173Z,1520662988.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:23:08.577Z,1520662988.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:23:08.976Z,1520662988.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:23:09.375Z,1520662989.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:23:09.766Z,1520662989.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:23:10.164Z,1520662990.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:23:10.575Z,1520662990.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:23:10.977Z,1520662990.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:23:11.374Z,1520662991.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:23:11.774Z,1520662991.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:23:12.181Z,1520662992.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:23:12.574Z,1520662992.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:23:12.975Z,1520662992.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:23:13.374Z,1520662993.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:23:13.766Z,1520662993.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:23:14.165Z,1520662994.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:23:14.579Z,1520662994.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:23:14.981Z,1520662994.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:23:15.397Z,1520662995.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:23:15.750Z,1520662995.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:23:16.169Z,1520662996.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:23:16.578Z,1520662996.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:23:16.979Z,1520662996.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:23:17.381Z,1520662997.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:23:17.771Z,1520662997.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:23:18.153Z,1520662998.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:23:18.575Z,1520662998.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:23:18.979Z,1520662998.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:23:19.382Z,1520662999.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:23:19.780Z,1520662999.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:23:20.177Z,1520663000.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:23:20.583Z,1520663000.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:23:20.978Z,1520663000.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:23:21.389Z,1520663001.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:23:21.761Z,1520663001.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:23:22.157Z,1520663002.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:23:22.582Z,1520663002.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:23:22.978Z,1520663002.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:23:23.379Z,1520663003.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:23:23.758Z,1520663003.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:23:24.181Z,1520663004.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:23:24.608Z,1520663004.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:23:24.994Z,1520663004.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:23:25.368Z,1520663005.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:23:25.764Z,1520663005.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:23:26.165Z,1520663006.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:23:26.567Z,1520663006.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:23:26.977Z,1520663006.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:23:27.398Z,1520663007.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:23:27.763Z,1520663007.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:23:28.173Z,1520663008.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:23:31.279Z,1520663011.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:23:31.459Z,1520663011.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:23:31.849Z,1520663011.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:23:32.248Z,1520663012.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:23:32.650Z,1520663012.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:23:33.053Z,1520663013.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:23:33.457Z,1520663013.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:23:33.857Z,1520663013.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:23:34.249Z,1520663014.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:23:34.657Z,1520663014.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:23:35.049Z,1520663015.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:23:35.449Z,1520663015.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:23:35.834Z,1520663015.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:23:36.260Z,1520663016.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:23:36.660Z,1520663016.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:23:37.062Z,1520663017.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:23:37.439Z,1520663017.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:23:37.842Z,1520663017.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:23:38.238Z,1520663018.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:23:38.638Z,1520663018.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:23:39.037Z,1520663019.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:23:39.477Z,1520663019.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:23:39.885Z,1520663019.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:23:40.264Z,1520663020.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:23:40.663Z,1520663020.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:23:41.041Z,1520663021.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:23:41.440Z,1520663021.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:23:41.843Z,1520663021.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:23:42.238Z,1520663022.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:23:42.645Z,1520663022.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:23:43.066Z,1520663023.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:23:43.468Z,1520663023.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:23:43.839Z,1520663023.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:23:44.242Z,1520663024.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:23:44.640Z,1520663024.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:23:45.044Z,1520663025.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:23:45.440Z,1520663025.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:23:45.869Z,1520663025.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:23:46.265Z,1520663026.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:23:46.694Z,1520663026.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:23:47.065Z,1520663027.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:23:47.450Z,1520663027.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:23:47.858Z,1520663027.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:23:48.257Z,1520663028.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:23:48.651Z,1520663028.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:23:49.065Z,1520663029.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:23:49.468Z,1520663029.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:23:49.856Z,1520663029.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:23:50.266Z,1520663030.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:23:50.663Z,1520663030.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:23:51.057Z,1520663031.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:23:51.457Z,1520663031.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:23:51.873Z,1520663031.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:23:52.281Z,1520663032.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:23:52.662Z,1520663032.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:23:53.036Z,1520663033.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:23:53.441Z,1520663033.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:23:53.868Z,1520663033.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:23:54.265Z,1520663034.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:23:54.661Z,1520663034.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:23:55.059Z,1520663035.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:23:55.462Z,1520663035.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:23:55.841Z,1520663035.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:23:56.237Z,1520663036.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:23:56.641Z,1520663036.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:23:57.068Z,1520663037.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:23:57.468Z,1520663037.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:23:57.863Z,1520663037.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:23:58.266Z,1520663038.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:23:58.669Z,1520663038.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:23:59.049Z,1520663039.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:23:59.443Z,1520663039.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:23:59.844Z,1520663039.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:24:00.257Z,1520663040.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:24:00.676Z,1520663040.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:24:01.057Z,1520663041.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:24:01.455Z,1520663041.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:24:01.861Z,1520663041.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:24:02.245Z,1520663042.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:24:02.644Z,1520663042.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:24:03.042Z,1520663043.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:24:03.445Z,1520663043.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:24:03.855Z,1520663043.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:24:04.250Z,1520663044.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:24:04.657Z,1520663044.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:24:05.061Z,1520663045.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:24:05.443Z,1520663045.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:24:05.845Z,1520663045.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:24:06.242Z,1520663046.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:24:06.655Z,1520663046.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:24:07.064Z,1520663047.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:24:07.447Z,1520663047.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:24:07.843Z,1520663047.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:24:08.259Z,1520663048.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:24:08.641Z,1520663048.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:24:09.044Z,1520663049.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:24:09.445Z,1520663049.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:24:09.861Z,1520663049.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:24:10.262Z,1520663050.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:24:10.660Z,1520663050.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:24:11.051Z,1520663051.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:24:11.444Z,1520663051.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:24:11.843Z,1520663051.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:24:12.242Z,1520663052.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:24:12.712Z,1520663052.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:24:13.079Z,1520663053.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:24:13.454Z,1520663053.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:24:13.839Z,1520663053.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:24:14.253Z,1520663054.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:24:14.649Z,1520663054.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:24:15.061Z,1520663055.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:24:15.449Z,1520663055.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:24:15.857Z,1520663055.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:24:16.257Z,1520663056.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:24:16.666Z,1520663056.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:24:17.045Z,1520663057.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:24:17.449Z,1520663057.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:24:17.869Z,1520663057.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:24:18.250Z,1520663058.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:24:18.649Z,1520663058.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:24:19.054Z,1520663059.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:24:19.455Z,1520663059.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:24:19.855Z,1520663059.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:24:20.252Z,1520663060.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:24:20.649Z,1520663060.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:24:21.057Z,1520663061.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:24:21.457Z,1520663061.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:24:21.861Z,1520663061.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:24:22.261Z,1520663062.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:24:22.659Z,1520663062.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:24:23.033Z,1520663063.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:24:23.451Z,1520663063.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:24:23.854Z,1520663063.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:24:24.257Z,1520663064.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:24:24.677Z,1520663064.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:24:25.057Z,1520663065.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:24:25.455Z,1520663065.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:24:25.854Z,1520663065.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:24:26.269Z,1520663066.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:24:26.668Z,1520663066.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:24:27.034Z,1520663067.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:24:27.460Z,1520663067.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:24:27.865Z,1520663067.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:24:28.255Z,1520663068.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:24:31.372Z,1520663071.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:24:31.517Z,1520663071.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:24:31.913Z,1520663071.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:24:32.296Z,1520663072.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:24:32.729Z,1520663072.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:24:33.122Z,1520663073.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:24:33.521Z,1520663073.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:24:33.924Z,1520663073.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:24:34.298Z,1520663074.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:24:34.701Z,1520663074.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:24:35.098Z,1520663075.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:24:35.499Z,1520663075.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:24:35.927Z,1520663075.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:24:36.323Z,1520663076.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:24:36.726Z,1520663076.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:24:37.096Z,1520663077.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:24:37.498Z,1520663077.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:24:37.898Z,1520663077.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:24:38.303Z,1520663078.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:24:38.729Z,1520663078.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:24:39.134Z,1520663079.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:24:39.535Z,1520663079.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:24:39.905Z,1520663079.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:24:40.307Z,1520663080.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:24:40.705Z,1520663080.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:24:41.105Z,1520663081.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:24:41.513Z,1520663081.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:24:41.911Z,1520663081.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:24:42.307Z,1520663082.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:24:42.710Z,1520663082.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:24:43.105Z,1520663083.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:24:43.512Z,1520663083.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:24:43.933Z,1520663083.933 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:24:43.933Z,1520663083.933 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 23
2018-03-10T06:24:43.933Z,1520663083.933 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-03-10T06:24:43.935Z,1520663083.935 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:24:43.935Z,1520663083.935 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 23
2018-03-10T06:24:43.935Z,1520663083.935 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-03-10T06:24:43.937Z,1520663083.937 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:24:43.937Z,1520663083.937 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 23
2018-03-10T06:24:43.937Z,1520663083.937 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-10T06:24:44.019Z,1520663084.019 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-03-10T06:24:44.019Z,1520663084.019 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-03-10T06:24:44.020Z,1520663084.020 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-10T06:24:44.379Z,1520663084.379 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-03-10T06:24:44.379Z,1520663084.379 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 23
2018-03-10T06:24:44.380Z,1520663084.380 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-03-10T06:24:44.380Z,1520663084.380 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 23
2018-03-10T06:24:44.380Z,1520663084.380 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-10T06:24:44.380Z,1520663084.380 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 23
2018-03-10T06:24:44.720Z,1520663084.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-03-10T06:24:44.720Z,1520663084.720 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-03-10T06:24:44.720Z,1520663084.720 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-03-10T06:24:44.721Z,1520663084.721 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-03-10T06:24:44.721Z,1520663084.721 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-03-10T06:24:44.721Z,1520663084.721 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-03-10T06:24:44.722Z,1520663084.722 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-10T06:24:44.722Z,1520663084.722 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-10T06:24:44.722Z,1520663084.722 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-10T06:24:45.118Z,1520663085.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-03-10T06:24:45.118Z,1520663085.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:24:45.524Z,1520663085.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-03-10T06:24:45.525Z,1520663085.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:24:45.903Z,1520663085.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-03-10T06:24:45.904Z,1520663085.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:24:46.307Z,1520663086.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-03-10T06:24:46.308Z,1520663086.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:24:46.726Z,1520663086.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-03-10T06:24:46.727Z,1520663086.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:24:47.111Z,1520663087.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-03-10T06:24:47.112Z,1520663087.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:24:47.506Z,1520663087.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-03-10T06:24:47.508Z,1520663087.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:24:47.920Z,1520663087.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-03-10T06:24:47.920Z,1520663087.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:24:48.318Z,1520663088.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-03-10T06:24:48.319Z,1520663088.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:24:48.718Z,1520663088.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-03-10T06:24:48.719Z,1520663088.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:24:49.111Z,1520663089.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-03-10T06:24:49.112Z,1520663089.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:24:49.507Z,1520663089.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-03-10T06:24:49.508Z,1520663089.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:24:49.912Z,1520663089.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-03-10T06:24:49.913Z,1520663089.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:24:50.308Z,1520663090.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-03-10T06:24:50.309Z,1520663090.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:24:50.718Z,1520663090.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-03-10T06:24:50.719Z,1520663090.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:24:51.129Z,1520663091.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-03-10T06:24:51.130Z,1520663091.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:24:51.540Z,1520663091.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-03-10T06:24:51.541Z,1520663091.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:24:51.910Z,1520663091.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-03-10T06:24:51.911Z,1520663091.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:24:52.313Z,1520663092.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-03-10T06:24:52.314Z,1520663092.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:24:52.723Z,1520663092.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-03-10T06:24:52.723Z,1520663092.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:24:53.098Z,1520663093.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-03-10T06:24:53.115Z,1520663093.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:24:53.496Z,1520663093.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-03-10T06:24:53.497Z,1520663093.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:24:53.923Z,1520663093.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-03-10T06:24:53.924Z,1520663093.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:24:54.325Z,1520663094.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-03-10T06:24:54.325Z,1520663094.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:24:54.721Z,1520663094.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-03-10T06:24:54.722Z,1520663094.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:24:55.100Z,1520663095.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-03-10T06:24:55.101Z,1520663095.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:24:55.497Z,1520663095.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-03-10T06:24:55.498Z,1520663095.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:24:55.911Z,1520663095.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-03-10T06:24:55.912Z,1520663095.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:24:56.338Z,1520663096.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-03-10T06:24:56.339Z,1520663096.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:24:56.740Z,1520663096.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-03-10T06:24:56.741Z,1520663096.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:24:57.125Z,1520663097.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-03-10T06:24:57.126Z,1520663097.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:24:57.526Z,1520663097.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-03-10T06:24:57.526Z,1520663097.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:24:57.901Z,1520663097.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-03-10T06:24:57.902Z,1520663097.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:24:58.301Z,1520663098.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-03-10T06:24:58.302Z,1520663098.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:24:58.702Z,1520663098.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-03-10T06:24:58.703Z,1520663098.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:24:59.102Z,1520663099.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-03-10T06:24:59.103Z,1520663099.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:24:59.502Z,1520663099.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-03-10T06:24:59.502Z,1520663099.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:24:59.924Z,1520663099.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-03-10T06:24:59.925Z,1520663099.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:25:00.322Z,1520663100.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-03-10T06:25:00.323Z,1520663100.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:25:00.724Z,1520663100.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-03-10T06:25:00.725Z,1520663100.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:25:01.101Z,1520663101.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-03-10T06:25:01.102Z,1520663101.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:25:01.501Z,1520663101.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-03-10T06:25:01.502Z,1520663101.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:25:01.901Z,1520663101.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-03-10T06:25:01.902Z,1520663101.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:25:02.301Z,1520663102.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2018-03-10T06:25:02.302Z,1520663102.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:25:02.721Z,1520663102.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2018-03-10T06:25:02.722Z,1520663102.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:25:03.125Z,1520663103.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2018-03-10T06:25:03.126Z,1520663103.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:25:03.523Z,1520663103.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2018-03-10T06:25:03.524Z,1520663103.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:25:03.924Z,1520663103.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 20.0 s old, using for 20.0 s.
2018-03-10T06:25:03.925Z,1520663103.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:25:04.336Z,1520663104.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:25:04.701Z,1520663104.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:25:05.101Z,1520663105.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:25:05.501Z,1520663105.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:25:05.931Z,1520663105.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:25:06.326Z,1520663106.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:25:06.730Z,1520663106.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:25:07.101Z,1520663107.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:25:07.501Z,1520663107.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:25:07.905Z,1520663107.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:25:08.302Z,1520663108.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:25:08.745Z,1520663108.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:25:09.132Z,1520663109.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:25:09.510Z,1520663109.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:25:09.905Z,1520663109.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:25:10.306Z,1520663110.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:25:10.707Z,1520663110.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:25:11.100Z,1520663111.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:25:11.505Z,1520663111.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:25:11.933Z,1520663111.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:25:12.310Z,1520663112.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:25:12.710Z,1520663112.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:25:13.110Z,1520663113.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:25:13.505Z,1520663113.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:25:13.907Z,1520663113.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:25:14.306Z,1520663114.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:25:14.731Z,1520663114.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:25:15.112Z,1520663115.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:25:15.532Z,1520663115.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:25:15.905Z,1520663115.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:25:16.312Z,1520663116.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:25:16.736Z,1520663116.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:25:17.113Z,1520663117.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:25:17.504Z,1520663117.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:25:17.935Z,1520663117.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:25:18.314Z,1520663118.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:25:18.711Z,1520663118.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:25:19.106Z,1520663119.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:25:19.505Z,1520663119.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:25:19.907Z,1520663119.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:25:20.313Z,1520663120.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:25:20.711Z,1520663120.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:25:21.117Z,1520663121.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:25:21.538Z,1520663121.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:25:21.902Z,1520663121.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:25:22.313Z,1520663122.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:25:22.708Z,1520663122.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:25:23.113Z,1520663123.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:25:23.504Z,1520663123.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:25:23.911Z,1520663123.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:25:24.314Z,1520663124.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:25:24.711Z,1520663124.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:25:25.106Z,1520663125.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:25:25.507Z,1520663125.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:25:25.584Z,1520663125.584 [CBIT](DEBUG): EFC running - data check-sum false
2018-03-10T06:25:25.907Z,1520663125.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:25:26.308Z,1520663126.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:25:26.712Z,1520663126.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:25:27.114Z,1520663127.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:25:27.511Z,1520663127.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:25:27.907Z,1520663127.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:25:28.307Z,1520663128.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:25:31.451Z,1520663131.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:25:31.593Z,1520663131.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:25:32.005Z,1520663132.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:25:32.405Z,1520663132.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:25:32.801Z,1520663132.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:25:33.178Z,1520663133.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:25:33.607Z,1520663133.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:25:34.012Z,1520663134.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:25:34.377Z,1520663134.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:25:34.804Z,1520663134.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:25:35.202Z,1520663135.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:25:35.602Z,1520663135.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:25:35.978Z,1520663135.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:25:36.381Z,1520663136.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:25:36.781Z,1520663136.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:25:37.178Z,1520663137.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:25:37.606Z,1520663137.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:25:38.006Z,1520663138.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:25:38.413Z,1520663138.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:25:38.781Z,1520663138.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:25:39.178Z,1520663139.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:25:39.608Z,1520663139.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:25:40.006Z,1520663140.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:25:40.409Z,1520663140.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:25:40.781Z,1520663140.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:25:41.185Z,1520663141.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:25:41.609Z,1520663141.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:25:42.011Z,1520663142.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:25:42.407Z,1520663142.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:25:42.783Z,1520663142.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:25:43.182Z,1520663143.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:25:43.609Z,1520663143.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:25:44.018Z,1520663144.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:25:44.419Z,1520663144.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:25:44.787Z,1520663144.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:25:45.186Z,1520663145.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:25:45.592Z,1520663145.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:25:46.012Z,1520663146.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:25:46.412Z,1520663146.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:25:46.812Z,1520663146.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:25:47.185Z,1520663147.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:25:47.593Z,1520663147.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:25:48.001Z,1520663148.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:25:48.410Z,1520663148.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:25:48.797Z,1520663148.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:25:49.188Z,1520663149.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:25:49.604Z,1520663149.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:25:50.049Z,1520663150.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:25:50.404Z,1520663150.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:25:50.805Z,1520663150.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:25:51.210Z,1520663151.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:25:51.605Z,1520663151.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:25:51.997Z,1520663151.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:25:52.409Z,1520663152.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:25:52.799Z,1520663152.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:25:53.178Z,1520663153.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:25:53.609Z,1520663153.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:25:54.011Z,1520663154.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:25:54.409Z,1520663154.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:25:54.779Z,1520663154.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:25:55.185Z,1520663155.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:25:55.608Z,1520663155.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:25:56.010Z,1520663156.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:25:56.418Z,1520663156.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:25:56.820Z,1520663156.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:25:57.182Z,1520663157.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:25:57.609Z,1520663157.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:25:58.008Z,1520663158.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:25:58.405Z,1520663158.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:25:58.788Z,1520663158.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:25:59.181Z,1520663159.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:25:59.609Z,1520663159.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:26:00.017Z,1520663160.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:26:00.408Z,1520663160.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:26:00.791Z,1520663160.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:26:01.187Z,1520663161.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:26:01.590Z,1520663161.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:26:01.992Z,1520663161.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:26:02.392Z,1520663162.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:26:02.787Z,1520663162.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:26:03.185Z,1520663163.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:26:03.585Z,1520663163.585 [BPC1](ERROR): Failed to receive battery data
2018-03-10T06:26:03.585Z,1520663163.585 [BPC1] Communications Fault, FailCount= 1
2018-03-10T06:26:03.585Z,1520663163.585 [BPC1](ERROR): Communications Fault
2018-03-10T06:26:03.593Z,1520663163.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:26:03.695Z,1520663163.695 [CBIT](ERROR): Communications Fault in component: BPC1
2018-03-10T06:26:03.989Z,1520663163.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:26:04.391Z,1520663164.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:26:04.788Z,1520663164.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:26:04.867Z,1520663164.867 [CBIT](INFO): Clearing failed state for component BPC1
2018-03-10T06:26:04.867Z,1520663164.867 [BPC1] No Fault, FailCount= 1
2018-03-10T06:26:05.236Z,1520663165.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:26:05.591Z,1520663165.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:26:06.015Z,1520663166.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:26:06.391Z,1520663166.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:26:06.787Z,1520663166.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:26:07.186Z,1520663167.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:26:07.592Z,1520663167.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:26:07.991Z,1520663167.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:26:08.397Z,1520663168.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:26:08.789Z,1520663168.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:26:09.188Z,1520663169.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:26:09.597Z,1520663169.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:26:09.990Z,1520663169.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:26:10.397Z,1520663170.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:26:10.788Z,1520663170.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:26:11.188Z,1520663171.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:26:11.597Z,1520663171.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:26:11.992Z,1520663171.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:26:12.391Z,1520663172.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:26:12.788Z,1520663172.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:26:13.189Z,1520663173.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:26:13.592Z,1520663173.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:26:13.991Z,1520663173.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:26:14.397Z,1520663174.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:26:14.788Z,1520663174.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:26:15.186Z,1520663175.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:26:15.597Z,1520663175.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:26:15.995Z,1520663175.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:26:16.393Z,1520663176.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:26:16.788Z,1520663176.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:26:17.186Z,1520663177.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:26:17.597Z,1520663177.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:26:17.991Z,1520663177.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:26:18.390Z,1520663178.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:26:18.789Z,1520663178.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:26:19.194Z,1520663179.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:26:19.590Z,1520663179.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:26:19.991Z,1520663179.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:26:20.397Z,1520663180.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:26:20.789Z,1520663180.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:26:21.187Z,1520663181.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:26:21.596Z,1520663181.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:26:21.997Z,1520663181.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:26:22.391Z,1520663182.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:26:22.788Z,1520663182.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:26:23.189Z,1520663183.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:26:23.597Z,1520663183.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:26:23.997Z,1520663183.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:26:24.390Z,1520663184.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:26:24.788Z,1520663184.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:26:25.187Z,1520663185.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:26:25.590Z,1520663185.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:26:25.992Z,1520663185.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:26:26.397Z,1520663186.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:26:26.789Z,1520663186.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:26:27.186Z,1520663187.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:26:27.597Z,1520663187.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:26:27.996Z,1520663187.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:26:27.999Z,1520663187.999 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-03-10T06:21:27.9Z
2018-03-10T06:26:27.000Z,1520663188.000 [Default:CheckIn:Read_GPS] Stopped
2018-03-10T06:26:27.000Z,1520663188.000 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-03-10T06:26:28.391Z,1520663188.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:26:31.735Z,1520663191.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:26:31.849Z,1520663191.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:26:32.225Z,1520663192.225 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20180310T051512/Courier0028.lzma
2018-03-10T06:26:32.288Z,1520663192.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:26:32.680Z,1520663192.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:26:33.025Z,1520663193.025 [DataOverHttps](INFO): Moved sent file to Logs/20180310T051512/Courier0028.lzma.bak
2018-03-10T06:26:33.025Z,1520663193.025 [DataOverHttps](INFO): SBD MOMSN=8002282
2018-03-10T06:26:33.092Z,1520663193.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:26:33.734Z,1520663193.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:26:33.883Z,1520663193.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:26:34.279Z,1520663194.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:26:34.688Z,1520663194.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:26:35.085Z,1520663195.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:26:35.476Z,1520663195.476 [BPC1](FAULT): Failed to initialize
2018-03-10T06:26:35.476Z,1520663195.476 [BPC1] Communications Fault, FailCount= 2
2018-03-10T06:26:35.477Z,1520663195.477 [BPC1](ERROR): Communications Fault
2018-03-10T06:26:35.484Z,1520663195.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:26:35.560Z,1520663195.560 [CBIT](ERROR): Communications Fault in component: BPC1
2018-03-10T06:26:35.862Z,1520663195.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:26:38.956Z,1520663198.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:26:39.135Z,1520663199.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:26:39.215Z,1520663199.215 [CBIT](INFO): Clearing failed state for component BPC1
2018-03-10T06:26:39.215Z,1520663199.215 [BPC1] No Fault, FailCount= 2
2018-03-10T06:26:39.557Z,1520663199.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:26:39.906Z,1520663199.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:26:40.306Z,1520663200.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:26:40.698Z,1520663200.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:26:41.096Z,1520663201.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:26:44.203Z,1520663204.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:26:44.353Z,1520663204.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:26:44.703Z,1520663204.703 [DataOverHttps](INFO): Sending 168 bytes from file Logs/20180310T051512/Express0029.lzma
2018-03-10T06:26:44.765Z,1520663204.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:26:45.152Z,1520663205.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:26:45.493Z,1520663205.493 [DataOverHttps](INFO): Moved sent file to Logs/20180310T051512/Express0029.lzma.bak
2018-03-10T06:26:45.493Z,1520663205.493 [DataOverHttps](INFO): SBD MOMSN=8002284
2018-03-10T06:26:45.555Z,1520663205.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:26:46.213Z,1520663206.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:26:46.216Z,1520663206.216 [Default:CheckIn:Read_Iridium] Stopped
2018-03-10T06:26:46.216Z,1520663206.216 [Default:CheckIn:C.Wait] Running Loop=1
2018-03-10T06:26:46.216Z,1520663206.216 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-03-10T06:26:46.385Z,1520663206.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:26:46.789Z,1520663206.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:26:49.886Z,1520663209.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:26:50.045Z,1520663210.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:26:50.448Z,1520663210.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:26:50.847Z,1520663210.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:26:51.247Z,1520663211.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:26:51.653Z,1520663211.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:26:52.071Z,1520663212.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:26:52.444Z,1520663212.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:26:52.847Z,1520663212.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:26:53.249Z,1520663213.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:26:53.647Z,1520663213.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:26:54.045Z,1520663214.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:26:54.453Z,1520663214.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:26:54.854Z,1520663214.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:26:55.255Z,1520663215.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:26:55.661Z,1520663215.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:26:56.026Z,1520663216.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:26:56.453Z,1520663216.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:26:56.831Z,1520663216.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:26:57.225Z,1520663217.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:26:57.658Z,1520663217.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:26:58.058Z,1520663218.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:26:58.442Z,1520663218.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:26:58.830Z,1520663218.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:26:59.230Z,1520663219.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:26:59.631Z,1520663219.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:27:00.070Z,1520663220.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:27:00.434Z,1520663220.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:27:00.842Z,1520663220.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:27:01.241Z,1520663221.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:27:01.642Z,1520663221.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:27:02.032Z,1520663222.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:27:02.434Z,1520663222.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:27:02.838Z,1520663222.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:27:03.234Z,1520663223.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:27:03.643Z,1520663223.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:27:04.049Z,1520663224.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:27:04.442Z,1520663224.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:27:04.835Z,1520663224.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:27:05.238Z,1520663225.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:27:05.636Z,1520663225.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:27:06.062Z,1520663226.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:27:06.435Z,1520663226.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:27:06.928Z,1520663226.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:27:07.249Z,1520663227.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:27:07.649Z,1520663227.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:27:08.041Z,1520663228.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:27:08.441Z,1520663228.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:27:08.841Z,1520663228.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:27:09.241Z,1520663229.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:27:09.671Z,1520663229.671 [BPC1](FAULT): Failed to initialize
2018-03-10T06:27:09.671Z,1520663229.671 [BPC1] Communications Fault, FailCount= 3
2018-03-10T06:27:09.671Z,1520663229.671 [BPC1](ERROR): Communications Fault
2018-03-10T06:27:09.685Z,1520663229.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:27:09.767Z,1520663229.767 [CBIT](ERROR): Communications Fault in component: BPC1
2018-03-10T06:27:10.048Z,1520663230.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:27:10.446Z,1520663230.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:27:10.840Z,1520663230.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:27:10.923Z,1520663230.923 [CBIT](INFO): Clearing failed state for component BPC1
2018-03-10T06:27:10.923Z,1520663230.923 [BPC1] No Fault, FailCount= 3
2018-03-10T06:27:11.289Z,1520663231.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:27:11.641Z,1520663231.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:27:12.035Z,1520663232.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:27:12.437Z,1520663232.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:27:12.876Z,1520663232.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:27:13.253Z,1520663233.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:27:13.646Z,1520663233.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:27:14.041Z,1520663234.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:27:14.445Z,1520663234.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:27:14.841Z,1520663234.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:27:15.241Z,1520663235.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:27:15.653Z,1520663235.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:27:16.046Z,1520663236.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:27:16.443Z,1520663236.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:27:16.834Z,1520663236.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:27:17.238Z,1520663237.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:27:17.640Z,1520663237.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:27:18.037Z,1520663238.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:27:18.435Z,1520663238.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:27:18.850Z,1520663238.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:27:19.253Z,1520663239.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:27:19.653Z,1520663239.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:27:20.034Z,1520663240.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:27:20.438Z,1520663240.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:27:20.836Z,1520663240.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:27:21.238Z,1520663241.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:27:21.646Z,1520663241.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:27:22.048Z,1520663242.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:27:22.444Z,1520663242.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:27:22.834Z,1520663242.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:27:23.235Z,1520663243.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:27:23.640Z,1520663243.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:27:24.035Z,1520663244.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:27:24.432Z,1520663244.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:27:24.846Z,1520663244.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:27:25.246Z,1520663245.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:27:25.646Z,1520663245.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:27:26.040Z,1520663246.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:27:26.433Z,1520663246.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:27:26.838Z,1520663246.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:27:27.239Z,1520663247.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:27:27.646Z,1520663247.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:27:28.046Z,1520663248.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:27:28.453Z,1520663248.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:27:28.836Z,1520663248.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:27:29.234Z,1520663249.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:27:29.639Z,1520663249.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:27:30.041Z,1520663250.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:27:30.434Z,1520663250.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:27:30.843Z,1520663250.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:27:31.246Z,1520663251.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:27:31.643Z,1520663251.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:27:32.031Z,1520663252.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:27:32.441Z,1520663252.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:27:32.835Z,1520663252.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:27:33.236Z,1520663253.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:27:33.647Z,1520663253.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:27:34.043Z,1520663254.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:27:34.453Z,1520663254.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:27:34.833Z,1520663254.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:27:35.234Z,1520663255.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:27:35.641Z,1520663255.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:27:36.034Z,1520663256.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:27:36.434Z,1520663256.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:27:36.853Z,1520663256.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:27:37.246Z,1520663257.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:27:37.647Z,1520663257.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:27:38.033Z,1520663258.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:27:38.435Z,1520663258.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:27:38.869Z,1520663258.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:27:39.234Z,1520663259.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:27:39.645Z,1520663259.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:27:40.046Z,1520663260.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:27:40.453Z,1520663260.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:27:40.841Z,1520663260.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:27:41.235Z,1520663261.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:27:41.628Z,1520663261.628 [BPC1](FAULT): Failed to initialize
2018-03-10T06:27:41.628Z,1520663261.628 [BPC1] Communications Fault, FailCount= 4
2018-03-10T06:27:41.628Z,1520663261.628 [BPC1](ERROR): Communications Fault
2018-03-10T06:27:41.635Z,1520663261.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:27:41.707Z,1520663261.707 [CBIT](ERROR): Communications Fault in component: BPC1
2018-03-10T06:27:42.039Z,1520663262.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:27:42.437Z,1520663262.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:27:42.853Z,1520663262.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:27:42.931Z,1520663262.931 [CBIT](INFO): Clearing failed state for component BPC1
2018-03-10T06:27:42.931Z,1520663262.931 [BPC1] No Fault, FailCount= 4
2018-03-10T06:27:43.309Z,1520663263.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:27:43.657Z,1520663263.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:27:44.036Z,1520663264.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:27:44.436Z,1520663264.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:27:44.845Z,1520663264.845 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:27:44.845Z,1520663264.845 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 24
2018-03-10T06:27:44.846Z,1520663264.846 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-03-10T06:27:44.847Z,1520663264.847 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:27:44.847Z,1520663264.847 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 24
2018-03-10T06:27:44.847Z,1520663264.847 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-03-10T06:27:44.849Z,1520663264.849 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:27:44.849Z,1520663264.849 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 24
2018-03-10T06:27:44.849Z,1520663264.849 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-10T06:27:44.923Z,1520663264.923 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-03-10T06:27:44.923Z,1520663264.923 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-03-10T06:27:44.923Z,1520663264.923 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-10T06:27:45.339Z,1520663265.339 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-03-10T06:27:45.339Z,1520663265.339 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 24
2018-03-10T06:27:45.340Z,1520663265.340 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-03-10T06:27:45.340Z,1520663265.340 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 24
2018-03-10T06:27:45.340Z,1520663265.340 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-10T06:27:45.340Z,1520663265.340 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 24
2018-03-10T06:27:45.670Z,1520663265.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-03-10T06:27:45.670Z,1520663265.670 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-03-10T06:27:45.670Z,1520663265.670 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-03-10T06:27:45.671Z,1520663265.671 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-03-10T06:27:45.671Z,1520663265.671 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-03-10T06:27:45.672Z,1520663265.672 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-03-10T06:27:45.672Z,1520663265.672 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-10T06:27:45.672Z,1520663265.672 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-10T06:27:45.673Z,1520663265.673 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-10T06:27:46.040Z,1520663266.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-03-10T06:27:46.041Z,1520663266.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:27:46.437Z,1520663266.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-03-10T06:27:46.438Z,1520663266.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:27:46.872Z,1520663266.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-03-10T06:27:46.873Z,1520663266.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:27:50.707Z,1520663270.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.9 s old, using for 20.0 s.
2018-03-10T06:27:50.708Z,1520663270.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:27:50.872Z,1520663270.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-03-10T06:27:50.873Z,1520663270.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:27:51.271Z,1520663271.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-03-10T06:27:51.272Z,1520663271.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:27:51.668Z,1520663271.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-03-10T06:27:51.669Z,1520663271.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:27:52.066Z,1520663272.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-03-10T06:27:52.068Z,1520663272.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:27:52.462Z,1520663272.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-03-10T06:27:52.463Z,1520663272.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:27:52.862Z,1520663272.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-03-10T06:27:52.868Z,1520663272.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:27:53.267Z,1520663273.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-03-10T06:27:53.268Z,1520663273.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:27:53.668Z,1520663273.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-03-10T06:27:53.669Z,1520663273.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:27:54.070Z,1520663274.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-03-10T06:27:54.071Z,1520663274.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:27:54.468Z,1520663274.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-03-10T06:27:54.469Z,1520663274.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:27:54.845Z,1520663274.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-03-10T06:27:54.846Z,1520663274.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:27:55.245Z,1520663275.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-03-10T06:27:55.246Z,1520663275.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:27:55.646Z,1520663275.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-03-10T06:27:55.647Z,1520663275.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:27:56.053Z,1520663276.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-03-10T06:27:56.054Z,1520663276.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:27:56.449Z,1520663276.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-03-10T06:27:56.450Z,1520663276.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:27:56.874Z,1520663276.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-03-10T06:27:56.876Z,1520663276.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:27:57.270Z,1520663277.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-03-10T06:27:57.272Z,1520663277.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:27:57.681Z,1520663277.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-03-10T06:27:57.682Z,1520663277.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:27:58.046Z,1520663278.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-03-10T06:27:58.047Z,1520663278.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:27:58.449Z,1520663278.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-03-10T06:27:58.450Z,1520663278.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:27:58.851Z,1520663278.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-03-10T06:27:58.852Z,1520663278.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:27:59.256Z,1520663279.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-03-10T06:27:59.257Z,1520663279.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:27:59.678Z,1520663279.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-03-10T06:27:59.679Z,1520663279.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:28:00.076Z,1520663280.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-03-10T06:28:00.076Z,1520663280.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:28:00.458Z,1520663280.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-03-10T06:28:00.475Z,1520663280.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:28:00.860Z,1520663280.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-03-10T06:28:00.861Z,1520663280.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:28:01.250Z,1520663281.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-03-10T06:28:01.251Z,1520663281.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:28:01.650Z,1520663281.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-03-10T06:28:01.652Z,1520663281.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:28:02.050Z,1520663282.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-03-10T06:28:02.051Z,1520663282.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:28:02.450Z,1520663282.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-03-10T06:28:02.451Z,1520663282.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:28:02.855Z,1520663282.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-03-10T06:28:02.856Z,1520663282.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:28:03.259Z,1520663283.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2018-03-10T06:28:03.260Z,1520663283.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:28:03.659Z,1520663283.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2018-03-10T06:28:03.660Z,1520663283.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:28:04.054Z,1520663284.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2018-03-10T06:28:04.055Z,1520663284.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:28:04.455Z,1520663284.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2018-03-10T06:28:04.456Z,1520663284.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:28:04.856Z,1520663284.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:28:05.281Z,1520663285.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:28:05.682Z,1520663285.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:28:06.081Z,1520663286.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:28:06.455Z,1520663286.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:28:06.854Z,1520663286.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:28:07.254Z,1520663287.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:28:07.653Z,1520663287.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:28:08.054Z,1520663288.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:28:08.471Z,1520663288.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:28:08.881Z,1520663288.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:28:09.258Z,1520663289.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:28:09.659Z,1520663289.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:28:10.048Z,1520663290.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:28:10.454Z,1520663290.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:28:10.855Z,1520663290.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:28:11.252Z,1520663291.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:28:11.697Z,1520663291.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:28:12.059Z,1520663292.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:28:12.481Z,1520663292.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:28:12.861Z,1520663292.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:28:13.254Z,1520663293.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:28:13.654Z,1520663293.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:28:14.055Z,1520663294.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:28:14.456Z,1520663294.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:28:14.880Z,1520663294.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:28:15.259Z,1520663295.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:28:15.659Z,1520663295.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:28:16.053Z,1520663296.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:28:16.453Z,1520663296.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:28:16.861Z,1520663296.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:28:17.255Z,1520663297.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:28:17.688Z,1520663297.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:28:18.066Z,1520663298.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:28:18.466Z,1520663298.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:28:18.853Z,1520663298.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:28:19.254Z,1520663299.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:28:19.654Z,1520663299.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:28:20.054Z,1520663300.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:28:20.456Z,1520663300.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:28:20.859Z,1520663300.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:28:21.258Z,1520663301.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:28:21.659Z,1520663301.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:28:22.061Z,1520663302.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:28:22.454Z,1520663302.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:28:22.861Z,1520663302.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:28:23.254Z,1520663303.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:28:23.665Z,1520663303.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:28:24.090Z,1520663304.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:28:24.459Z,1520663304.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:28:24.861Z,1520663304.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:28:25.257Z,1520663305.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:28:25.690Z,1520663305.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:28:26.057Z,1520663306.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:28:26.469Z,1520663306.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:28:26.919Z,1520663306.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:28:27.277Z,1520663307.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:28:27.671Z,1520663307.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:28:28.041Z,1520663308.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:28:28.475Z,1520663308.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:28:28.920Z,1520663308.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:28:29.269Z,1520663309.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:28:29.674Z,1520663309.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:28:30.072Z,1520663310.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:28:30.475Z,1520663310.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:28:30.845Z,1520663310.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:28:31.246Z,1520663311.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:28:31.646Z,1520663311.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:28:32.046Z,1520663312.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:28:32.450Z,1520663312.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:28:32.874Z,1520663312.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:28:33.274Z,1520663313.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:28:33.677Z,1520663313.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:28:34.045Z,1520663314.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:28:34.449Z,1520663314.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:28:34.894Z,1520663314.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:28:35.246Z,1520663315.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:28:35.670Z,1520663315.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:28:36.089Z,1520663316.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:28:36.481Z,1520663316.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:28:36.851Z,1520663316.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:28:37.251Z,1520663317.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:28:37.650Z,1520663317.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:28:38.051Z,1520663318.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:28:38.455Z,1520663318.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:28:38.879Z,1520663318.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:28:39.273Z,1520663319.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:28:39.701Z,1520663319.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:28:40.079Z,1520663320.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:28:40.455Z,1520663320.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:28:40.851Z,1520663320.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:28:41.251Z,1520663321.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:28:41.665Z,1520663321.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:28:42.063Z,1520663322.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:28:42.465Z,1520663322.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:28:42.854Z,1520663322.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:28:43.257Z,1520663323.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:28:43.656Z,1520663323.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:28:44.056Z,1520663324.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:28:44.450Z,1520663324.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:28:44.857Z,1520663324.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:28:45.258Z,1520663325.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:28:45.658Z,1520663325.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:28:46.051Z,1520663326.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:28:46.454Z,1520663326.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:28:46.857Z,1520663326.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:28:49.991Z,1520663329.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:28:50.161Z,1520663330.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:28:50.558Z,1520663330.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:28:50.957Z,1520663330.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:28:51.330Z,1520663331.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:28:51.729Z,1520663331.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:28:52.131Z,1520663332.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:28:52.533Z,1520663332.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:28:52.934Z,1520663332.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:28:53.335Z,1520663333.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:28:53.734Z,1520663333.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:28:54.129Z,1520663334.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:28:54.527Z,1520663334.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:28:54.937Z,1520663334.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:28:55.328Z,1520663335.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:28:55.731Z,1520663335.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:28:56.134Z,1520663336.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:28:56.556Z,1520663336.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:28:56.929Z,1520663336.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:28:57.329Z,1520663337.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:28:57.729Z,1520663337.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:28:58.131Z,1520663338.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:28:58.529Z,1520663338.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:28:58.956Z,1520663338.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:28:59.335Z,1520663339.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:28:59.734Z,1520663339.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:29:00.129Z,1520663340.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:29:00.529Z,1520663340.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:29:00.937Z,1520663340.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:29:01.329Z,1520663341.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:29:01.735Z,1520663341.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:29:02.171Z,1520663342.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:29:02.564Z,1520663342.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:29:02.930Z,1520663342.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:29:03.329Z,1520663343.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:29:03.737Z,1520663343.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:29:04.127Z,1520663344.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:29:04.530Z,1520663344.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:29:04.935Z,1520663344.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:29:05.335Z,1520663345.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:29:05.734Z,1520663345.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:29:06.126Z,1520663346.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:29:06.529Z,1520663346.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:29:06.930Z,1520663346.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:29:07.328Z,1520663347.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:29:07.735Z,1520663347.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:29:08.135Z,1520663348.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:29:08.534Z,1520663348.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:29:08.930Z,1520663348.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:29:09.330Z,1520663349.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:29:09.732Z,1520663349.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:29:10.130Z,1520663350.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:29:10.530Z,1520663350.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:29:10.940Z,1520663350.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:29:11.334Z,1520663351.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:29:11.736Z,1520663351.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:29:12.132Z,1520663352.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:29:12.531Z,1520663352.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:29:12.931Z,1520663352.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:29:13.332Z,1520663353.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:29:13.735Z,1520663353.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:29:14.140Z,1520663354.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:29:14.573Z,1520663354.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:29:14.963Z,1520663354.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:29:15.330Z,1520663355.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:29:15.729Z,1520663355.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:29:16.130Z,1520663356.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:29:16.530Z,1520663356.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:29:16.935Z,1520663356.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:29:17.335Z,1520663357.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:29:17.734Z,1520663357.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:29:18.130Z,1520663358.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:29:18.529Z,1520663358.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:29:18.930Z,1520663358.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:29:19.330Z,1520663359.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:29:19.735Z,1520663359.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:29:20.135Z,1520663360.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:29:20.534Z,1520663360.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:29:20.929Z,1520663360.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:29:21.330Z,1520663361.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:29:21.731Z,1520663361.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:29:22.132Z,1520663362.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:29:22.530Z,1520663362.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:29:22.939Z,1520663362.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:29:23.338Z,1520663363.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:29:23.745Z,1520663363.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:29:24.133Z,1520663364.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:29:24.530Z,1520663364.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:29:24.930Z,1520663364.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:29:25.340Z,1520663365.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:29:25.765Z,1520663365.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:29:26.169Z,1520663366.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:29:26.538Z,1520663366.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:29:26.930Z,1520663366.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:29:27.337Z,1520663367.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:29:27.745Z,1520663367.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:29:28.132Z,1520663368.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:29:28.539Z,1520663368.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:29:28.948Z,1520663368.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:29:29.343Z,1520663369.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:29:29.742Z,1520663369.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:29:30.132Z,1520663370.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:29:30.532Z,1520663370.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:29:30.932Z,1520663370.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:29:31.332Z,1520663371.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:29:31.735Z,1520663371.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:29:32.142Z,1520663372.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:29:32.543Z,1520663372.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:29:32.931Z,1520663372.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:29:33.331Z,1520663373.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:29:33.733Z,1520663373.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:29:34.130Z,1520663374.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:29:34.531Z,1520663374.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:29:34.949Z,1520663374.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:29:35.349Z,1520663375.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:29:35.744Z,1520663375.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:29:36.134Z,1520663376.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:29:36.530Z,1520663376.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:29:36.931Z,1520663376.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:29:37.338Z,1520663377.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:29:37.776Z,1520663377.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:29:38.142Z,1520663378.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:29:38.543Z,1520663378.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:29:38.937Z,1520663378.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:29:39.345Z,1520663379.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:29:39.756Z,1520663379.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:29:40.130Z,1520663380.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:29:40.531Z,1520663380.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:29:40.946Z,1520663380.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:29:41.348Z,1520663381.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:29:41.742Z,1520663381.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:29:42.133Z,1520663382.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:29:42.533Z,1520663382.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:29:42.931Z,1520663382.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:29:43.332Z,1520663383.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:29:43.739Z,1520663383.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:29:44.142Z,1520663384.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:29:44.546Z,1520663384.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:29:44.933Z,1520663384.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:29:45.331Z,1520663385.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:29:45.734Z,1520663385.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:29:46.135Z,1520663386.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:29:46.530Z,1520663386.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:29:46.953Z,1520663386.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:29:51.305Z,1520663391.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:29:51.497Z,1520663391.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:29:51.855Z,1520663391.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:29:52.257Z,1520663392.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:29:52.658Z,1520663392.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:29:53.061Z,1520663393.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:29:53.449Z,1520663393.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:29:53.862Z,1520663393.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:29:54.263Z,1520663394.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:29:54.660Z,1520663394.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:29:55.052Z,1520663395.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:29:55.459Z,1520663395.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:29:55.856Z,1520663395.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:29:56.254Z,1520663396.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:29:56.665Z,1520663396.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:29:57.062Z,1520663397.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:29:57.461Z,1520663397.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:29:57.857Z,1520663397.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:29:58.253Z,1520663398.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:29:58.659Z,1520663398.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:29:59.070Z,1520663399.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:29:59.456Z,1520663399.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:29:59.862Z,1520663399.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:30:00.279Z,1520663400.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:30:00.673Z,1520663400.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:30:01.055Z,1520663401.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:30:01.463Z,1520663401.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:30:01.858Z,1520663401.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:30:02.265Z,1520663402.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:30:02.717Z,1520663402.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:30:03.089Z,1520663403.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:30:03.469Z,1520663403.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:30:03.862Z,1520663403.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:30:04.265Z,1520663404.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:30:04.660Z,1520663404.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:30:05.061Z,1520663405.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:30:05.457Z,1520663405.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:30:05.867Z,1520663405.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:30:06.269Z,1520663406.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:30:06.665Z,1520663406.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:30:07.059Z,1520663407.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:30:07.458Z,1520663407.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:30:07.857Z,1520663407.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:30:08.258Z,1520663408.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:30:08.671Z,1520663408.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:30:09.067Z,1520663409.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:30:09.467Z,1520663409.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:30:09.860Z,1520663409.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:30:10.262Z,1520663410.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:30:10.656Z,1520663410.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:30:11.059Z,1520663411.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:30:11.465Z,1520663411.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:30:11.867Z,1520663411.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:30:12.268Z,1520663412.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:30:12.670Z,1520663412.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:30:13.067Z,1520663413.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:30:13.489Z,1520663413.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:30:13.877Z,1520663413.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:30:14.269Z,1520663414.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:30:14.681Z,1520663414.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:30:15.072Z,1520663415.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:30:15.477Z,1520663415.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:30:15.872Z,1520663415.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:30:16.249Z,1520663416.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:30:16.668Z,1520663416.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:30:17.050Z,1520663417.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:30:17.446Z,1520663417.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:30:17.872Z,1520663417.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:30:18.273Z,1520663418.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:30:18.680Z,1520663418.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:30:19.050Z,1520663419.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:30:19.448Z,1520663419.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:30:19.876Z,1520663419.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:30:20.250Z,1520663420.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:30:20.673Z,1520663420.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:30:21.069Z,1520663421.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:30:21.459Z,1520663421.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:30:21.849Z,1520663421.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:30:22.246Z,1520663422.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:30:22.649Z,1520663422.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:30:23.050Z,1520663423.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:30:23.465Z,1520663423.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:30:23.865Z,1520663423.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:30:24.266Z,1520663424.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:30:24.677Z,1520663424.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:30:25.065Z,1520663425.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:30:25.465Z,1520663425.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:30:25.872Z,1520663425.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:30:26.247Z,1520663426.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:30:26.659Z,1520663426.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:30:27.066Z,1520663427.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:30:27.469Z,1520663427.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:30:27.861Z,1520663427.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:30:28.261Z,1520663428.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:30:28.661Z,1520663428.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:30:29.061Z,1520663429.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:30:29.460Z,1520663429.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:30:29.873Z,1520663429.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:30:30.266Z,1520663430.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:30:30.673Z,1520663430.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:30:31.055Z,1520663431.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:30:31.458Z,1520663431.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:30:31.858Z,1520663431.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:30:32.262Z,1520663432.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:30:32.666Z,1520663432.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:30:33.073Z,1520663433.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:30:33.473Z,1520663433.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:30:33.862Z,1520663433.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:30:34.261Z,1520663434.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:30:34.656Z,1520663434.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:30:35.059Z,1520663435.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:30:35.466Z,1520663435.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:30:35.899Z,1520663435.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:30:36.274Z,1520663436.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:30:36.685Z,1520663436.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:30:37.058Z,1520663437.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:30:37.461Z,1520663437.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:30:37.859Z,1520663437.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:30:38.258Z,1520663438.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:30:38.669Z,1520663438.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:30:39.074Z,1520663439.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:30:39.467Z,1520663439.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:30:39.858Z,1520663439.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:30:40.265Z,1520663440.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:30:40.659Z,1520663440.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:30:41.069Z,1520663441.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:30:41.458Z,1520663441.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:30:41.876Z,1520663441.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:30:42.309Z,1520663442.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:30:42.667Z,1520663442.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:30:43.060Z,1520663443.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:30:43.460Z,1520663443.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:30:43.865Z,1520663443.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:30:44.257Z,1520663444.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:30:44.676Z,1520663444.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:30:45.078Z,1520663445.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:30:45.466Z,1520663445.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:30:45.869Z,1520663445.869 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:30:45.869Z,1520663445.869 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 25
2018-03-10T06:30:45.869Z,1520663445.869 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-03-10T06:30:45.871Z,1520663445.871 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:30:45.872Z,1520663445.872 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 25
2018-03-10T06:30:45.872Z,1520663445.872 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-03-10T06:30:45.873Z,1520663445.873 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:30:45.873Z,1520663445.873 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 25
2018-03-10T06:30:45.873Z,1520663445.873 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-10T06:30:45.955Z,1520663445.955 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-03-10T06:30:45.955Z,1520663445.955 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-03-10T06:30:45.955Z,1520663445.955 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-10T06:30:46.347Z,1520663446.347 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-03-10T06:30:46.347Z,1520663446.347 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 25
2018-03-10T06:30:46.348Z,1520663446.348 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-03-10T06:30:46.348Z,1520663446.348 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 25
2018-03-10T06:30:46.348Z,1520663446.348 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-10T06:30:46.348Z,1520663446.348 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 25
2018-03-10T06:30:46.672Z,1520663446.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-03-10T06:30:46.672Z,1520663446.672 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-03-10T06:30:46.672Z,1520663446.672 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-03-10T06:30:46.673Z,1520663446.673 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-03-10T06:30:46.673Z,1520663446.673 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-03-10T06:30:46.673Z,1520663446.673 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-03-10T06:30:46.674Z,1520663446.674 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-10T06:30:46.674Z,1520663446.674 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-10T06:30:46.674Z,1520663446.674 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-10T06:30:47.073Z,1520663447.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-03-10T06:30:47.074Z,1520663447.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:30:50.185Z,1520663450.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.3 s old, using for 20.0 s.
2018-03-10T06:30:50.186Z,1520663450.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:30:50.348Z,1520663450.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.5 s old, using for 20.0 s.
2018-03-10T06:30:50.349Z,1520663450.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:30:50.748Z,1520663450.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.9 s old, using for 20.0 s.
2018-03-10T06:30:50.749Z,1520663450.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:30:51.156Z,1520663451.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.3 s old, using for 20.0 s.
2018-03-10T06:30:51.157Z,1520663451.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:30:51.543Z,1520663451.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.7 s old, using for 20.0 s.
2018-03-10T06:30:51.544Z,1520663451.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:30:51.940Z,1520663451.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.1 s old, using for 20.0 s.
2018-03-10T06:30:51.941Z,1520663451.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:30:52.317Z,1520663452.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-03-10T06:30:52.317Z,1520663452.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:30:52.746Z,1520663452.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.9 s old, using for 20.0 s.
2018-03-10T06:30:52.747Z,1520663452.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:30:53.149Z,1520663453.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.3 s old, using for 20.0 s.
2018-03-10T06:30:53.150Z,1520663453.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:30:53.545Z,1520663453.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.7 s old, using for 20.0 s.
2018-03-10T06:30:53.546Z,1520663453.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:30:53.918Z,1520663453.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-03-10T06:30:53.919Z,1520663453.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:30:54.324Z,1520663454.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.5 s old, using for 20.0 s.
2018-03-10T06:30:54.325Z,1520663454.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:30:54.748Z,1520663454.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.9 s old, using for 20.0 s.
2018-03-10T06:30:54.749Z,1520663454.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:30:55.121Z,1520663455.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.3 s old, using for 20.0 s.
2018-03-10T06:30:55.122Z,1520663455.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:30:55.521Z,1520663455.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.7 s old, using for 20.0 s.
2018-03-10T06:30:55.522Z,1520663455.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:30:55.947Z,1520663455.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.1 s old, using for 20.0 s.
2018-03-10T06:30:55.948Z,1520663455.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:30:56.349Z,1520663456.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.5 s old, using for 20.0 s.
2018-03-10T06:30:56.350Z,1520663456.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:30:56.730Z,1520663456.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.9 s old, using for 20.0 s.
2018-03-10T06:30:56.748Z,1520663456.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:30:57.128Z,1520663457.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.3 s old, using for 20.0 s.
2018-03-10T06:30:57.129Z,1520663457.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:30:57.522Z,1520663457.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.7 s old, using for 20.0 s.
2018-03-10T06:30:57.522Z,1520663457.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:30:57.922Z,1520663457.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.1 s old, using for 20.0 s.
2018-03-10T06:30:57.923Z,1520663457.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:30:58.321Z,1520663458.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.5 s old, using for 20.0 s.
2018-03-10T06:30:58.322Z,1520663458.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:30:58.751Z,1520663458.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.9 s old, using for 20.0 s.
2018-03-10T06:30:58.752Z,1520663458.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:30:59.154Z,1520663459.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.3 s old, using for 20.0 s.
2018-03-10T06:30:59.155Z,1520663459.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:30:59.551Z,1520663459.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.7 s old, using for 20.0 s.
2018-03-10T06:30:59.552Z,1520663459.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:30:59.928Z,1520663459.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.1 s old, using for 20.0 s.
2018-03-10T06:30:59.929Z,1520663459.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:31:00.321Z,1520663460.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.5 s old, using for 20.0 s.
2018-03-10T06:31:00.322Z,1520663460.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:31:00.722Z,1520663460.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.9 s old, using for 20.0 s.
2018-03-10T06:31:00.723Z,1520663460.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:31:01.129Z,1520663461.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.3 s old, using for 20.0 s.
2018-03-10T06:31:01.130Z,1520663461.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:31:01.556Z,1520663461.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.7 s old, using for 20.0 s.
2018-03-10T06:31:01.557Z,1520663461.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:31:01.955Z,1520663461.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.1 s old, using for 20.0 s.
2018-03-10T06:31:01.956Z,1520663461.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:31:02.331Z,1520663462.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.5 s old, using for 20.0 s.
2018-03-10T06:31:02.332Z,1520663462.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:31:02.732Z,1520663462.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.9 s old, using for 20.0 s.
2018-03-10T06:31:02.733Z,1520663462.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:31:03.127Z,1520663463.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.3 s old, using for 20.0 s.
2018-03-10T06:31:03.128Z,1520663463.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:31:03.529Z,1520663463.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.7 s old, using for 20.0 s.
2018-03-10T06:31:03.529Z,1520663463.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:31:03.927Z,1520663463.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.1 s old, using for 20.0 s.
2018-03-10T06:31:03.928Z,1520663463.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:31:04.329Z,1520663464.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.5 s old, using for 20.0 s.
2018-03-10T06:31:04.330Z,1520663464.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:31:04.731Z,1520663464.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.9 s old, using for 20.0 s.
2018-03-10T06:31:04.732Z,1520663464.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:31:05.134Z,1520663465.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.3 s old, using for 20.0 s.
2018-03-10T06:31:05.136Z,1520663465.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:31:05.531Z,1520663465.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.7 s old, using for 20.0 s.
2018-03-10T06:31:05.532Z,1520663465.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:31:05.925Z,1520663465.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:31:06.328Z,1520663466.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:31:06.734Z,1520663466.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:31:07.161Z,1520663467.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:31:07.529Z,1520663467.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:31:07.938Z,1520663467.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:31:08.337Z,1520663468.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:31:08.738Z,1520663468.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:31:09.129Z,1520663469.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:31:09.529Z,1520663469.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:31:09.929Z,1520663469.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:31:10.329Z,1520663470.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:31:10.741Z,1520663470.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:31:11.145Z,1520663471.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:31:11.545Z,1520663471.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:31:11.925Z,1520663471.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:31:12.335Z,1520663472.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:31:12.741Z,1520663472.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:31:13.127Z,1520663473.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:31:13.528Z,1520663473.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:31:13.938Z,1520663473.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:31:14.345Z,1520663474.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:31:14.739Z,1520663474.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:31:15.124Z,1520663475.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:31:15.527Z,1520663475.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:31:15.929Z,1520663475.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:31:16.329Z,1520663476.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:31:16.738Z,1520663476.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:31:17.143Z,1520663477.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:31:17.545Z,1520663477.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:31:17.928Z,1520663477.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:31:18.328Z,1520663478.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:31:18.727Z,1520663478.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:31:19.140Z,1520663479.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:31:19.537Z,1520663479.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:31:19.945Z,1520663479.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:31:20.339Z,1520663480.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:31:20.749Z,1520663480.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:31:21.130Z,1520663481.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:31:21.527Z,1520663481.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:31:21.930Z,1520663481.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:31:22.337Z,1520663482.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:31:22.739Z,1520663482.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:31:23.144Z,1520663483.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:31:23.557Z,1520663483.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:31:23.930Z,1520663483.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:31:24.336Z,1520663484.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:31:24.732Z,1520663484.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:31:25.130Z,1520663485.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:31:25.534Z,1520663485.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:31:25.940Z,1520663485.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:31:26.339Z,1520663486.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:31:26.740Z,1520663486.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:31:27.130Z,1520663487.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:31:27.530Z,1520663487.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:31:27.936Z,1520663487.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:31:28.337Z,1520663488.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:31:28.741Z,1520663488.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:31:29.144Z,1520663489.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:31:29.540Z,1520663489.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:31:29.932Z,1520663489.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:31:30.333Z,1520663490.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:31:30.738Z,1520663490.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:31:31.130Z,1520663491.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:31:31.537Z,1520663491.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:31:31.965Z,1520663491.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:31:32.338Z,1520663492.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:31:32.738Z,1520663492.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:31:33.121Z,1520663493.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:31:33.541Z,1520663493.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:31:33.922Z,1520663493.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:31:34.321Z,1520663494.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:31:34.745Z,1520663494.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:31:35.152Z,1520663495.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:31:35.549Z,1520663495.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:31:35.921Z,1520663495.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:31:36.323Z,1520663496.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:31:36.729Z,1520663496.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:31:37.123Z,1520663497.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:31:37.529Z,1520663497.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:31:37.923Z,1520663497.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:31:38.351Z,1520663498.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:31:38.750Z,1520663498.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:31:39.122Z,1520663499.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:31:39.529Z,1520663499.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:31:39.929Z,1520663499.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:31:40.321Z,1520663500.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:31:40.749Z,1520663500.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:31:41.147Z,1520663501.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:31:41.549Z,1520663501.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:31:41.921Z,1520663501.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:31:42.321Z,1520663502.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:31:42.722Z,1520663502.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:31:43.122Z,1520663503.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:31:43.521Z,1520663503.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:31:43.946Z,1520663503.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:31:44.358Z,1520663504.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:31:44.761Z,1520663504.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:31:45.159Z,1520663505.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:31:45.569Z,1520663505.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:31:45.971Z,1520663505.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:31:46.329Z,1520663506.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:31:46.745Z,1520663506.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:31:46.760Z,1520663506.760 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-03-10T06:31:46.761Z,1520663506.761 [Default:CheckIn:C.Wait] Stopped
2018-03-10T06:31:46.761Z,1520663506.761 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-03-10T06:31:46.761Z,1520663506.761 [Default:CheckIn:D] Running Loop=1
2018-03-10T06:31:47.145Z,1520663507.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:31:47.148Z,1520663507.148 [Default:CheckIn:D] Stopped
2018-03-10T06:31:47.148Z,1520663507.148 [Default:CheckIn:E] Running Loop=1
2018-03-10T06:31:51.016Z,1520663511.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:31:51.025Z,1520663511.025 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 72.487118 min 
2018-03-10T06:31:51.025Z,1520663511.025 [Default:CheckIn:E] Stopped
2018-03-10T06:31:51.025Z,1520663511.025 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-03-10T06:31:51.025Z,1520663511.025 [Default:CheckIn] Stopped
2018-03-10T06:31:51.025Z,1520663511.025 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-03-10T06:31:51.025Z,1520663511.025 [Default:CheckIn](INFO): Running loop #8
2018-03-10T06:31:51.025Z,1520663511.025 [Default:CheckIn] Running Loop=8
2018-03-10T06:31:51.026Z,1520663511.026 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-03-10T06:31:51.026Z,1520663511.026 [Default:CheckIn:Read_GPS] Running Loop=1
2018-03-10T06:31:51.174Z,1520663511.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:31:51.570Z,1520663511.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:31:51.971Z,1520663511.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:31:52.371Z,1520663512.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:31:52.784Z,1520663512.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:31:53.184Z,1520663513.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:31:53.578Z,1520663513.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:31:53.970Z,1520663513.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:31:54.370Z,1520663514.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:31:54.770Z,1520663514.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:31:55.171Z,1520663515.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:31:55.579Z,1520663515.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:31:55.980Z,1520663515.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:31:56.386Z,1520663516.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:31:56.802Z,1520663516.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:31:57.177Z,1520663517.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:31:57.582Z,1520663517.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:31:57.977Z,1520663517.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:31:58.385Z,1520663518.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:31:58.781Z,1520663518.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:31:59.157Z,1520663519.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:31:59.586Z,1520663519.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:31:59.990Z,1520663519.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:32:00.387Z,1520663520.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:32:00.759Z,1520663520.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:32:01.158Z,1520663521.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:32:01.587Z,1520663521.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:32:01.986Z,1520663521.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:32:02.391Z,1520663522.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:32:02.757Z,1520663522.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:32:03.165Z,1520663523.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:32:03.592Z,1520663523.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:32:03.970Z,1520663523.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:32:04.391Z,1520663524.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:32:04.762Z,1520663524.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:32:05.165Z,1520663525.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:32:05.591Z,1520663525.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:32:05.988Z,1520663525.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:32:06.391Z,1520663526.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:32:06.762Z,1520663526.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:32:07.162Z,1520663527.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:32:07.588Z,1520663527.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:32:07.991Z,1520663527.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:32:08.401Z,1520663528.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:32:08.796Z,1520663528.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:32:09.162Z,1520663529.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:32:09.596Z,1520663529.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:32:09.992Z,1520663529.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:32:10.390Z,1520663530.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:32:10.761Z,1520663530.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:32:11.162Z,1520663531.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:32:11.595Z,1520663531.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:32:11.991Z,1520663531.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:32:12.399Z,1520663532.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:32:12.773Z,1520663532.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:32:13.174Z,1520663533.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:32:13.581Z,1520663533.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:32:13.981Z,1520663533.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:32:14.377Z,1520663534.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:32:14.769Z,1520663534.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:32:15.173Z,1520663535.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:32:15.571Z,1520663535.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:32:15.983Z,1520663535.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:32:16.370Z,1520663536.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:32:16.774Z,1520663536.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:32:17.161Z,1520663537.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:32:17.571Z,1520663537.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:32:17.971Z,1520663537.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:32:18.371Z,1520663538.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:32:18.763Z,1520663538.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:32:19.180Z,1520663539.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:32:19.572Z,1520663539.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:32:19.979Z,1520663539.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:32:20.380Z,1520663540.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:32:20.770Z,1520663540.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:32:21.174Z,1520663541.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:32:21.610Z,1520663541.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:32:21.985Z,1520663541.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:32:22.386Z,1520663542.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:32:22.786Z,1520663542.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:32:23.171Z,1520663543.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:32:23.578Z,1520663543.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:32:23.980Z,1520663543.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:32:24.378Z,1520663544.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:32:24.769Z,1520663544.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:32:25.170Z,1520663545.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:32:25.575Z,1520663545.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:32:25.980Z,1520663545.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:32:26.378Z,1520663546.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:32:26.770Z,1520663546.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:32:27.171Z,1520663547.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:32:27.578Z,1520663547.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:32:27.975Z,1520663547.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:32:28.378Z,1520663548.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:32:28.770Z,1520663548.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:32:29.174Z,1520663549.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:32:29.579Z,1520663549.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:32:29.984Z,1520663549.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:32:30.379Z,1520663550.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:32:30.770Z,1520663550.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:32:31.176Z,1520663551.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:32:31.579Z,1520663551.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:32:31.979Z,1520663551.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:32:32.379Z,1520663552.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:32:32.772Z,1520663552.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:32:33.175Z,1520663553.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:32:33.586Z,1520663553.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:32:34.001Z,1520663554.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:32:34.379Z,1520663554.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:32:34.754Z,1520663554.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:32:35.191Z,1520663555.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:32:35.589Z,1520663555.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:32:35.980Z,1520663555.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:32:36.378Z,1520663556.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:32:36.765Z,1520663556.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:32:37.156Z,1520663557.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:32:37.591Z,1520663557.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:32:37.991Z,1520663557.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:32:38.392Z,1520663558.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:32:38.769Z,1520663558.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:32:39.169Z,1520663559.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:32:39.586Z,1520663559.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:32:39.991Z,1520663559.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:32:40.391Z,1520663560.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:32:40.761Z,1520663560.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:32:41.162Z,1520663561.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:32:41.591Z,1520663561.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:32:41.991Z,1520663561.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:32:42.390Z,1520663562.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:32:42.762Z,1520663562.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:32:43.161Z,1520663563.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:32:43.591Z,1520663563.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:32:43.991Z,1520663563.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:32:44.392Z,1520663564.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:32:44.762Z,1520663564.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:32:45.163Z,1520663565.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:32:45.589Z,1520663565.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:32:46.000Z,1520663566.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:32:46.394Z,1520663566.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:32:46.763Z,1520663566.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:32:47.165Z,1520663567.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:32:50.261Z,1520663570.261 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-03-10T06:32:50.262Z,1520663570.262 [NAL9602] Data Fault, FailCount= 3
2018-03-10T06:32:50.262Z,1520663570.262 [NAL9602](ERROR): Data Fault
2018-03-10T06:32:50.316Z,1520663570.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:32:50.423Z,1520663570.423 [CBIT](ERROR): Data Fault in component: NAL9602
2018-03-10T06:32:50.446Z,1520663570.446 [NAL9602](INFO): Powering down
2018-03-10T06:32:50.517Z,1520663570.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:32:50.887Z,1520663570.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:32:51.275Z,1520663571.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:32:51.388Z,1520663571.388 [CBIT](INFO): Clearing failed state for component NAL9602
2018-03-10T06:32:51.388Z,1520663571.388 [NAL9602] No Fault, FailCount= 3
2018-03-10T06:32:51.701Z,1520663571.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:32:52.077Z,1520663572.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:32:52.473Z,1520663572.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:32:52.872Z,1520663572.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:32:53.277Z,1520663573.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:32:53.676Z,1520663573.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:32:54.077Z,1520663574.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:32:54.478Z,1520663574.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:32:54.876Z,1520663574.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:32:55.285Z,1520663575.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:32:55.677Z,1520663575.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:32:56.076Z,1520663576.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:32:56.473Z,1520663576.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:32:56.880Z,1520663576.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:32:57.277Z,1520663577.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:32:57.673Z,1520663577.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:32:58.077Z,1520663578.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:32:58.479Z,1520663578.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:32:58.909Z,1520663578.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:32:59.278Z,1520663579.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:32:59.677Z,1520663579.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:33:00.077Z,1520663580.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:33:00.477Z,1520663580.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:33:00.884Z,1520663580.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:33:01.312Z,1520663581.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:33:01.677Z,1520663581.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:33:02.078Z,1520663582.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:33:02.484Z,1520663582.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:33:02.909Z,1520663582.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:33:03.281Z,1520663583.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:33:03.681Z,1520663583.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:33:04.082Z,1520663584.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:33:04.480Z,1520663584.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:33:04.877Z,1520663584.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:33:05.281Z,1520663585.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:33:05.679Z,1520663585.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:33:06.083Z,1520663586.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:33:06.482Z,1520663586.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:33:06.881Z,1520663586.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:33:07.282Z,1520663587.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:33:07.681Z,1520663587.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:33:08.081Z,1520663588.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:33:08.482Z,1520663588.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:33:08.882Z,1520663588.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:33:09.280Z,1520663589.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:33:09.683Z,1520663589.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:33:10.081Z,1520663590.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:33:10.483Z,1520663590.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:33:10.879Z,1520663590.879 [BPC1](ERROR): Bank B: No match for stick 3 serial number:1717 in the onboard configuration file.
2018-03-10T06:33:10.879Z,1520663590.879 [BPC1](ERROR): Failed to parse Bank B battery data
2018-03-10T06:33:10.880Z,1520663590.880 [BPC1] Data Fault, FailCount= 1
2018-03-10T06:33:10.880Z,1520663590.880 [BPC1](ERROR): Data Fault
2018-03-10T06:33:10.887Z,1520663590.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:33:10.983Z,1520663590.983 [CBIT](ERROR): Data Fault in component: BPC1
2018-03-10T06:33:11.284Z,1520663591.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:33:11.684Z,1520663591.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:33:12.083Z,1520663592.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:33:12.164Z,1520663592.164 [CBIT](INFO): Clearing failed state for component BPC1
2018-03-10T06:33:12.164Z,1520663592.164 [BPC1] No Fault, FailCount= 1
2018-03-10T06:33:12.537Z,1520663592.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:33:12.882Z,1520663592.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:33:13.284Z,1520663593.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:33:13.685Z,1520663593.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:33:14.081Z,1520663594.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:33:14.481Z,1520663594.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:33:14.881Z,1520663594.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:33:15.279Z,1520663595.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:33:15.676Z,1520663595.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:33:16.088Z,1520663596.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:33:16.479Z,1520663596.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:33:16.873Z,1520663596.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:33:17.281Z,1520663597.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:33:17.684Z,1520663597.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:33:18.124Z,1520663598.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:33:18.482Z,1520663598.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:33:18.881Z,1520663598.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:33:19.283Z,1520663599.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:33:19.682Z,1520663599.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:33:20.081Z,1520663600.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:33:20.478Z,1520663600.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:33:20.844Z,1520663600.844 [NAL9602](INFO): Powering up NAL9602
2018-03-10T06:33:20.889Z,1520663600.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:33:21.282Z,1520663601.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:33:21.673Z,1520663601.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:33:22.086Z,1520663602.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:33:22.483Z,1520663602.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:33:22.874Z,1520663602.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:33:23.287Z,1520663603.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:33:23.685Z,1520663603.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:33:24.085Z,1520663604.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:33:24.490Z,1520663604.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:33:24.898Z,1520663604.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:33:25.273Z,1520663605.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:33:25.674Z,1520663605.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:33:26.073Z,1520663606.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:33:26.472Z,1520663606.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:33:26.892Z,1520663606.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:33:27.274Z,1520663607.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:33:27.673Z,1520663607.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:33:28.087Z,1520663608.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:33:28.491Z,1520663608.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:33:28.874Z,1520663608.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:33:29.273Z,1520663609.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:33:29.690Z,1520663609.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:33:30.125Z,1520663610.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:33:30.521Z,1520663610.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:33:30.876Z,1520663610.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:33:31.273Z,1520663611.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:33:31.698Z,1520663611.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:33:32.048Z,1520663612.048 [NAL9602](INFO): NAL9602 initialized
2018-03-10T06:33:32.105Z,1520663612.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:33:32.473Z,1520663612.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:33:32.906Z,1520663612.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:33:33.308Z,1520663613.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:33:33.686Z,1520663613.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:33:34.078Z,1520663614.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:33:34.477Z,1520663614.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:33:34.874Z,1520663614.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:33:35.277Z,1520663615.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:33:35.706Z,1520663615.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:33:36.103Z,1520663616.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:33:36.506Z,1520663616.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:33:36.878Z,1520663616.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:33:37.277Z,1520663617.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:33:37.678Z,1520663617.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:33:38.078Z,1520663618.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:33:38.505Z,1520663618.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:33:38.906Z,1520663618.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:33:39.311Z,1520663619.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:33:39.679Z,1520663619.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:33:40.078Z,1520663620.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:33:40.507Z,1520663620.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:33:40.909Z,1520663620.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:33:41.308Z,1520663621.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:33:41.683Z,1520663621.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:33:42.081Z,1520663622.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:33:42.529Z,1520663622.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:33:42.925Z,1520663622.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:33:43.287Z,1520663623.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:33:43.683Z,1520663623.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:33:44.082Z,1520663624.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:33:44.487Z,1520663624.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:33:44.886Z,1520663624.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:33:45.325Z,1520663625.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:33:45.728Z,1520663625.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:33:46.098Z,1520663626.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:33:46.493Z,1520663626.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:33:46.905Z,1520663626.905 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:33:46.905Z,1520663626.905 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 26
2018-03-10T06:33:46.905Z,1520663626.905 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-03-10T06:33:46.911Z,1520663626.911 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:33:46.911Z,1520663626.911 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 26
2018-03-10T06:33:46.911Z,1520663626.911 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-03-10T06:33:46.913Z,1520663626.913 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:33:46.913Z,1520663626.913 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 26
2018-03-10T06:33:46.913Z,1520663626.913 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-10T06:33:47.015Z,1520663627.015 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-03-10T06:33:47.015Z,1520663627.015 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-03-10T06:33:47.016Z,1520663627.016 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-10T06:33:47.387Z,1520663627.387 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-03-10T06:33:47.387Z,1520663627.387 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 26
2018-03-10T06:33:47.388Z,1520663627.388 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-03-10T06:33:47.388Z,1520663627.388 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 26
2018-03-10T06:33:47.388Z,1520663627.388 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-10T06:33:47.388Z,1520663627.388 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 26
2018-03-10T06:33:47.708Z,1520663627.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-03-10T06:33:47.708Z,1520663627.708 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-03-10T06:33:47.708Z,1520663627.708 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-03-10T06:33:47.709Z,1520663627.709 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-03-10T06:33:47.709Z,1520663627.709 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-03-10T06:33:47.709Z,1520663627.709 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-03-10T06:33:47.710Z,1520663627.710 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-10T06:33:47.710Z,1520663627.710 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-10T06:33:47.710Z,1520663627.710 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-10T06:33:48.109Z,1520663628.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-03-10T06:33:48.110Z,1520663628.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:33:48.508Z,1520663628.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-03-10T06:33:48.509Z,1520663628.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:33:52.217Z,1520663632.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.3 s old, using for 20.0 s.
2018-03-10T06:33:52.218Z,1520663632.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:33:52.380Z,1520663632.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.5 s old, using for 20.0 s.
2018-03-10T06:33:52.381Z,1520663632.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:33:52.760Z,1520663632.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.9 s old, using for 20.0 s.
2018-03-10T06:33:52.761Z,1520663632.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:33:53.153Z,1520663633.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.2 s old, using for 20.0 s.
2018-03-10T06:33:53.154Z,1520663633.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:33:53.560Z,1520663633.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.7 s old, using for 20.0 s.
2018-03-10T06:33:53.561Z,1520663633.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:33:53.953Z,1520663633.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.0 s old, using for 20.0 s.
2018-03-10T06:33:53.954Z,1520663633.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:33:54.353Z,1520663634.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.4 s old, using for 20.0 s.
2018-03-10T06:33:54.354Z,1520663634.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:33:54.776Z,1520663634.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.9 s old, using for 20.0 s.
2018-03-10T06:33:54.777Z,1520663634.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:33:55.211Z,1520663635.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.3 s old, using for 20.0 s.
2018-03-10T06:33:55.212Z,1520663635.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:33:55.600Z,1520663635.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.7 s old, using for 20.0 s.
2018-03-10T06:33:55.601Z,1520663635.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:33:55.957Z,1520663635.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.1 s old, using for 20.0 s.
2018-03-10T06:33:55.958Z,1520663635.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:33:56.357Z,1520663636.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.5 s old, using for 20.0 s.
2018-03-10T06:33:56.358Z,1520663636.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:33:56.759Z,1520663636.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.9 s old, using for 20.0 s.
2018-03-10T06:33:56.760Z,1520663636.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:33:57.159Z,1520663637.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.3 s old, using for 20.0 s.
2018-03-10T06:33:57.160Z,1520663637.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:33:57.569Z,1520663637.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.7 s old, using for 20.0 s.
2018-03-10T06:33:57.570Z,1520663637.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:33:57.966Z,1520663637.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.1 s old, using for 20.0 s.
2018-03-10T06:33:57.968Z,1520663637.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:33:58.362Z,1520663638.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.5 s old, using for 20.0 s.
2018-03-10T06:33:58.364Z,1520663638.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:33:58.757Z,1520663638.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.9 s old, using for 20.0 s.
2018-03-10T06:33:58.758Z,1520663638.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:33:59.157Z,1520663639.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.3 s old, using for 20.0 s.
2018-03-10T06:33:59.158Z,1520663639.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:33:59.554Z,1520663639.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.6 s old, using for 20.0 s.
2018-03-10T06:33:59.555Z,1520663639.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:33:59.959Z,1520663639.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.1 s old, using for 20.0 s.
2018-03-10T06:33:59.960Z,1520663639.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:34:00.365Z,1520663640.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.5 s old, using for 20.0 s.
2018-03-10T06:34:00.366Z,1520663640.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:34:00.761Z,1520663640.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.9 s old, using for 20.0 s.
2018-03-10T06:34:00.762Z,1520663640.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:34:01.162Z,1520663641.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.3 s old, using for 20.0 s.
2018-03-10T06:34:01.163Z,1520663641.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:34:01.563Z,1520663641.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.7 s old, using for 20.0 s.
2018-03-10T06:34:01.564Z,1520663641.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:34:01.953Z,1520663641.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.0 s old, using for 20.0 s.
2018-03-10T06:34:01.954Z,1520663641.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:34:02.358Z,1520663642.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.5 s old, using for 20.0 s.
2018-03-10T06:34:02.358Z,1520663642.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:34:02.759Z,1520663642.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.9 s old, using for 20.0 s.
2018-03-10T06:34:02.760Z,1520663642.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:34:03.160Z,1520663643.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.3 s old, using for 20.0 s.
2018-03-10T06:34:03.161Z,1520663643.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:34:03.563Z,1520663643.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.7 s old, using for 20.0 s.
2018-03-10T06:34:03.564Z,1520663643.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:34:03.967Z,1520663643.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.1 s old, using for 20.0 s.
2018-03-10T06:34:03.968Z,1520663643.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:34:04.363Z,1520663644.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.5 s old, using for 20.0 s.
2018-03-10T06:34:04.364Z,1520663644.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:34:04.758Z,1520663644.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.9 s old, using for 20.0 s.
2018-03-10T06:34:04.759Z,1520663644.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:34:05.160Z,1520663645.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.3 s old, using for 20.0 s.
2018-03-10T06:34:05.161Z,1520663645.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:34:05.558Z,1520663645.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.7 s old, using for 20.0 s.
2018-03-10T06:34:05.559Z,1520663645.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:34:06.040Z,1520663646.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.1 s old, using for 20.0 s.
2018-03-10T06:34:06.041Z,1520663646.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:34:06.351Z,1520663646.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.4 s old, using for 20.0 s.
2018-03-10T06:34:06.352Z,1520663646.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:34:06.791Z,1520663646.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.9 s old, using for 20.0 s.
2018-03-10T06:34:06.792Z,1520663646.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:34:07.169Z,1520663647.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:34:07.639Z,1520663647.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:34:07.973Z,1520663647.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:34:08.369Z,1520663648.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:34:08.750Z,1520663648.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:34:09.157Z,1520663649.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:34:09.563Z,1520663649.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:34:09.973Z,1520663649.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:34:10.361Z,1520663650.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:34:10.757Z,1520663650.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:34:11.162Z,1520663651.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:34:11.554Z,1520663651.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:34:11.962Z,1520663651.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:34:12.358Z,1520663652.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:34:12.763Z,1520663652.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:34:13.192Z,1520663653.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:34:13.569Z,1520663653.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:34:13.960Z,1520663653.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:34:14.358Z,1520663654.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:34:14.761Z,1520663654.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:34:15.161Z,1520663655.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:34:15.564Z,1520663655.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:34:15.964Z,1520663655.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:34:16.364Z,1520663656.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:34:16.766Z,1520663656.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:34:17.158Z,1520663657.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:34:17.559Z,1520663657.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:34:17.959Z,1520663657.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:34:18.357Z,1520663658.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:34:18.763Z,1520663658.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:34:19.162Z,1520663659.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:34:19.569Z,1520663659.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:34:19.997Z,1520663659.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:34:20.364Z,1520663660.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:34:20.781Z,1520663660.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:34:21.160Z,1520663661.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:34:21.570Z,1520663661.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:34:21.971Z,1520663661.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:34:22.370Z,1520663662.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:34:22.757Z,1520663662.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:34:23.158Z,1520663663.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:34:23.565Z,1520663663.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:34:23.958Z,1520663663.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:34:24.358Z,1520663664.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:34:24.771Z,1520663664.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:34:25.169Z,1520663665.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:34:25.571Z,1520663665.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:34:25.965Z,1520663665.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:34:26.365Z,1520663666.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:34:26.766Z,1520663666.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:34:27.165Z,1520663667.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:34:27.573Z,1520663667.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:34:27.970Z,1520663667.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:34:28.370Z,1520663668.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:34:28.757Z,1520663668.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:34:29.158Z,1520663669.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:34:29.569Z,1520663669.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:34:29.958Z,1520663669.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:34:30.365Z,1520663670.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:34:30.770Z,1520663670.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:34:31.169Z,1520663671.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:34:31.571Z,1520663671.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:34:31.965Z,1520663671.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:34:32.364Z,1520663672.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:34:32.777Z,1520663672.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:34:33.166Z,1520663673.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:34:33.605Z,1520663673.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:34:33.981Z,1520663673.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:34:34.371Z,1520663674.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:34:34.759Z,1520663674.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:34:35.165Z,1520663675.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:34:35.569Z,1520663675.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:34:35.965Z,1520663675.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:34:36.373Z,1520663676.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:34:36.768Z,1520663676.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:34:37.171Z,1520663677.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:34:37.571Z,1520663677.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:34:37.969Z,1520663677.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:34:38.359Z,1520663678.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:34:38.762Z,1520663678.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:34:39.158Z,1520663679.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:34:39.571Z,1520663679.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:34:39.971Z,1520663679.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:34:40.371Z,1520663680.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:34:40.759Z,1520663680.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:34:41.169Z,1520663681.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:34:41.562Z,1520663681.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:34:41.965Z,1520663681.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:34:42.364Z,1520663682.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:34:42.771Z,1520663682.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:34:43.172Z,1520663683.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:34:43.573Z,1520663683.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:34:43.964Z,1520663683.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:34:44.369Z,1520663684.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:34:44.780Z,1520663684.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:34:45.181Z,1520663685.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:34:45.572Z,1520663685.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:34:45.985Z,1520663685.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:34:46.412Z,1520663686.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:34:46.765Z,1520663686.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:34:47.162Z,1520663687.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:34:47.561Z,1520663687.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:34:47.965Z,1520663687.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:34:48.362Z,1520663688.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:34:48.771Z,1520663688.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:34:51.913Z,1520663691.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:34:52.085Z,1520663692.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:34:52.460Z,1520663692.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:34:52.862Z,1520663692.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:34:53.242Z,1520663693.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:34:53.663Z,1520663693.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:34:54.065Z,1520663694.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:34:54.466Z,1520663694.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:34:54.860Z,1520663694.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:34:55.258Z,1520663695.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:34:55.641Z,1520663695.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:34:56.059Z,1520663696.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:34:56.465Z,1520663696.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:34:56.869Z,1520663696.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:34:57.293Z,1520663697.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:34:57.667Z,1520663697.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:34:58.046Z,1520663698.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:34:58.475Z,1520663698.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:34:58.874Z,1520663698.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:34:59.245Z,1520663699.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:34:59.675Z,1520663699.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:35:00.075Z,1520663700.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:35:00.454Z,1520663700.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:35:00.847Z,1520663700.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:35:01.245Z,1520663701.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:35:01.652Z,1520663701.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:35:02.053Z,1520663702.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:35:02.446Z,1520663702.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:35:02.850Z,1520663702.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:35:03.274Z,1520663703.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:35:03.675Z,1520663703.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:35:04.052Z,1520663704.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:35:04.445Z,1520663704.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:35:04.853Z,1520663704.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:35:05.246Z,1520663705.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:35:05.675Z,1520663705.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:35:06.079Z,1520663706.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:35:06.451Z,1520663706.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:35:06.849Z,1520663706.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:35:07.246Z,1520663707.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:35:07.653Z,1520663707.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:35:08.053Z,1520663708.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:35:08.446Z,1520663708.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:35:08.879Z,1520663708.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:35:09.258Z,1520663709.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:35:09.701Z,1520663709.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:35:10.079Z,1520663710.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:35:10.450Z,1520663710.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:35:10.857Z,1520663710.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:35:11.284Z,1520663711.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:35:11.657Z,1520663711.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:35:12.058Z,1520663712.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:35:12.458Z,1520663712.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:35:12.850Z,1520663712.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:35:13.251Z,1520663713.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:35:13.653Z,1520663713.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:35:14.050Z,1520663714.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:35:14.460Z,1520663714.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:35:14.858Z,1520663714.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:35:15.258Z,1520663715.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:35:15.651Z,1520663715.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:35:16.047Z,1520663716.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:35:16.450Z,1520663716.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:35:16.859Z,1520663716.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:35:17.259Z,1520663717.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:35:17.665Z,1520663717.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:35:18.051Z,1520663718.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:35:18.457Z,1520663718.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:35:18.852Z,1520663718.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:35:19.255Z,1520663719.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:35:19.658Z,1520663719.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:35:20.058Z,1520663720.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:35:20.465Z,1520663720.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:35:20.850Z,1520663720.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:35:21.249Z,1520663721.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:35:21.651Z,1520663721.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:35:22.054Z,1520663722.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:35:22.450Z,1520663722.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:35:22.859Z,1520663722.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:35:23.264Z,1520663723.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:35:23.694Z,1520663723.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:35:24.057Z,1520663724.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:35:24.454Z,1520663724.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:35:24.857Z,1520663724.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:35:25.256Z,1520663725.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:35:25.663Z,1520663725.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:35:25.743Z,1520663725.743 [CBIT](DEBUG): EFC running - data check-sum false
2018-03-10T06:35:26.064Z,1520663726.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:35:26.463Z,1520663726.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:35:26.853Z,1520663726.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:35:27.251Z,1520663727.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:35:27.661Z,1520663727.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:35:28.055Z,1520663728.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:35:28.451Z,1520663728.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:35:28.872Z,1520663728.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:35:29.259Z,1520663729.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:35:29.663Z,1520663729.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:35:30.061Z,1520663730.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:35:30.454Z,1520663730.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:35:30.861Z,1520663730.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:35:31.251Z,1520663731.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:35:31.659Z,1520663731.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:35:32.063Z,1520663732.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:35:32.466Z,1520663732.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:35:32.855Z,1520663732.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:35:33.257Z,1520663733.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:35:33.661Z,1520663733.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:35:34.056Z,1520663734.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:35:34.452Z,1520663734.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:35:34.904Z,1520663734.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:35:35.267Z,1520663735.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:35:35.671Z,1520663735.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:35:36.076Z,1520663736.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:35:36.455Z,1520663736.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:35:36.861Z,1520663736.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:35:37.265Z,1520663737.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:35:37.665Z,1520663737.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:35:38.063Z,1520663738.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:35:38.467Z,1520663738.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:35:38.850Z,1520663738.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:35:39.257Z,1520663739.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:35:39.654Z,1520663739.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:35:40.056Z,1520663740.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:35:40.455Z,1520663740.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:35:40.857Z,1520663740.857 [BPC1](ERROR): Failed to receive battery data
2018-03-10T06:35:40.857Z,1520663740.857 [BPC1] Communications Fault, FailCount= 1
2018-03-10T06:35:40.858Z,1520663740.858 [BPC1](ERROR): Communications Fault
2018-03-10T06:35:40.865Z,1520663740.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:35:40.944Z,1520663740.944 [CBIT](ERROR): Communications Fault in component: BPC1
2018-03-10T06:35:41.268Z,1520663741.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:35:41.669Z,1520663741.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:35:42.057Z,1520663742.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:35:42.139Z,1520663742.139 [CBIT](INFO): Clearing failed state for component BPC1
2018-03-10T06:35:42.139Z,1520663742.139 [BPC1] No Fault, FailCount= 1
2018-03-10T06:35:42.509Z,1520663742.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:35:42.853Z,1520663742.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:35:43.257Z,1520663743.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:35:43.659Z,1520663743.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:35:44.062Z,1520663744.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:35:44.463Z,1520663744.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:35:44.853Z,1520663744.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:35:45.256Z,1520663745.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:35:45.655Z,1520663745.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:35:46.056Z,1520663746.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:35:46.461Z,1520663746.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:35:46.877Z,1520663746.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:35:47.309Z,1520663747.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:35:47.681Z,1520663747.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:35:51.965Z,1520663751.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:35:52.181Z,1520663752.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:35:52.534Z,1520663752.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:35:52.935Z,1520663752.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:35:53.329Z,1520663753.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:35:53.721Z,1520663753.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:35:54.118Z,1520663754.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:35:54.517Z,1520663754.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:35:54.918Z,1520663754.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:35:55.325Z,1520663755.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:35:55.724Z,1520663755.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:35:56.129Z,1520663756.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:35:56.527Z,1520663756.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:35:56.918Z,1520663756.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:35:57.325Z,1520663757.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:35:57.727Z,1520663757.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:35:58.129Z,1520663758.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:35:58.526Z,1520663758.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:35:58.937Z,1520663758.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:35:59.330Z,1520663759.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:35:59.705Z,1520663759.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:36:00.133Z,1520663760.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:36:00.505Z,1520663760.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:36:00.996Z,1520663760.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:36:01.305Z,1520663761.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:36:01.762Z,1520663761.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:36:02.118Z,1520663762.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:36:02.519Z,1520663762.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:36:02.905Z,1520663762.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:36:03.305Z,1520663763.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:36:03.710Z,1520663763.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:36:04.119Z,1520663764.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:36:04.533Z,1520663764.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:36:04.931Z,1520663764.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:36:05.322Z,1520663765.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:36:05.714Z,1520663765.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:36:06.125Z,1520663766.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:36:06.513Z,1520663766.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:36:06.914Z,1520663766.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:36:07.317Z,1520663767.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:36:07.722Z,1520663767.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:36:08.125Z,1520663768.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:36:08.532Z,1520663768.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:36:08.915Z,1520663768.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:36:09.321Z,1520663769.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:36:09.716Z,1520663769.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:36:10.121Z,1520663770.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:36:10.533Z,1520663770.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:36:10.959Z,1520663770.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:36:11.325Z,1520663771.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:36:11.713Z,1520663771.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:36:12.121Z,1520663772.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:36:12.503Z,1520663772.503 [BPC1](FAULT): Failed to initialize
2018-03-10T06:36:12.503Z,1520663772.503 [BPC1] Communications Fault, FailCount= 2
2018-03-10T06:36:12.503Z,1520663772.503 [BPC1](ERROR): Communications Fault
2018-03-10T06:36:12.533Z,1520663772.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:36:12.615Z,1520663772.615 [CBIT](ERROR): Communications Fault in component: BPC1
2018-03-10T06:36:12.917Z,1520663772.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:36:13.318Z,1520663773.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:36:13.723Z,1520663773.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:36:13.799Z,1520663773.799 [CBIT](INFO): Clearing failed state for component BPC1
2018-03-10T06:36:13.799Z,1520663773.799 [BPC1] No Fault, FailCount= 2
2018-03-10T06:36:14.189Z,1520663774.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:36:14.533Z,1520663774.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:36:14.915Z,1520663774.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:36:15.321Z,1520663775.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:36:15.718Z,1520663775.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:36:16.115Z,1520663776.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:36:16.533Z,1520663776.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:36:16.928Z,1520663776.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:36:17.329Z,1520663777.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:36:17.721Z,1520663777.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:36:18.118Z,1520663778.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:36:18.518Z,1520663778.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:36:18.917Z,1520663778.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:36:19.317Z,1520663779.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:36:19.723Z,1520663779.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:36:20.129Z,1520663780.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:36:20.529Z,1520663780.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:36:20.913Z,1520663780.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:36:21.316Z,1520663781.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:36:21.719Z,1520663781.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:36:22.114Z,1520663782.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:36:22.537Z,1520663782.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:36:22.928Z,1520663782.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:36:23.333Z,1520663783.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:36:23.724Z,1520663783.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:36:24.102Z,1520663784.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:36:24.525Z,1520663784.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:36:24.908Z,1520663784.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:36:25.305Z,1520663785.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:36:25.727Z,1520663785.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:36:26.129Z,1520663786.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:36:26.530Z,1520663786.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:36:26.905Z,1520663786.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:36:27.333Z,1520663787.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:36:27.705Z,1520663787.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:36:28.112Z,1520663788.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:36:28.534Z,1520663788.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:36:28.914Z,1520663788.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:36:29.334Z,1520663789.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:36:29.733Z,1520663789.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:36:30.108Z,1520663790.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:36:30.517Z,1520663790.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:36:30.909Z,1520663790.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:36:31.308Z,1520663791.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:36:31.735Z,1520663791.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:36:32.138Z,1520663792.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:36:32.522Z,1520663792.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:36:32.913Z,1520663792.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:36:33.313Z,1520663793.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:36:33.709Z,1520663793.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:36:34.107Z,1520663794.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:36:34.522Z,1520663794.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:36:34.922Z,1520663794.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:36:35.314Z,1520663795.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:36:35.709Z,1520663795.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:36:36.108Z,1520663796.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:36:36.516Z,1520663796.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:36:36.921Z,1520663796.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:36:37.313Z,1520663797.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:36:37.739Z,1520663797.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:36:38.118Z,1520663798.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:36:38.541Z,1520663798.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:36:38.910Z,1520663798.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:36:39.312Z,1520663799.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:36:39.713Z,1520663799.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:36:40.117Z,1520663800.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:36:40.541Z,1520663800.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:36:40.984Z,1520663800.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:36:41.333Z,1520663801.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:36:41.713Z,1520663801.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:36:42.105Z,1520663802.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:36:42.505Z,1520663802.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:36:42.905Z,1520663802.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:36:43.305Z,1520663803.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:36:43.734Z,1520663803.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:36:44.134Z,1520663804.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:36:44.512Z,1520663804.512 [BPC1](FAULT): Failed to initialize
2018-03-10T06:36:44.512Z,1520663804.512 [BPC1] Communications Fault, FailCount= 3
2018-03-10T06:36:44.512Z,1520663804.512 [BPC1](ERROR): Communications Fault
2018-03-10T06:36:44.551Z,1520663804.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:36:44.631Z,1520663804.631 [CBIT](ERROR): Communications Fault in component: BPC1
2018-03-10T06:36:44.909Z,1520663804.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:36:45.313Z,1520663805.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:36:45.709Z,1520663805.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:36:45.799Z,1520663805.799 [CBIT](INFO): Clearing failed state for component BPC1
2018-03-10T06:36:45.799Z,1520663805.799 [BPC1] No Fault, FailCount= 3
2018-03-10T06:36:46.174Z,1520663806.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:36:46.538Z,1520663806.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:36:46.938Z,1520663806.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:36:47.337Z,1520663807.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:36:47.711Z,1520663807.711 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:36:47.711Z,1520663807.711 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 27
2018-03-10T06:36:47.711Z,1520663807.711 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-03-10T06:36:47.713Z,1520663807.713 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:36:47.713Z,1520663807.713 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 27
2018-03-10T06:36:47.713Z,1520663807.713 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-03-10T06:36:47.714Z,1520663807.714 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:36:47.715Z,1520663807.715 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 27
2018-03-10T06:36:47.715Z,1520663807.715 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-10T06:36:47.811Z,1520663807.811 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-03-10T06:36:47.812Z,1520663807.812 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-03-10T06:36:47.812Z,1520663807.812 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-10T06:36:50.911Z,1520663810.911 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-03-10T06:36:50.911Z,1520663810.911 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 27
2018-03-10T06:36:50.911Z,1520663810.911 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-03-10T06:36:50.912Z,1520663810.912 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 27
2018-03-10T06:36:50.912Z,1520663810.912 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-10T06:36:50.912Z,1520663810.912 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 27
2018-03-10T06:36:51.006Z,1520663811.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-03-10T06:36:51.007Z,1520663811.007 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-03-10T06:36:51.008Z,1520663811.008 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-03-10T06:36:51.008Z,1520663811.008 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-03-10T06:36:51.008Z,1520663811.008 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-03-10T06:36:51.009Z,1520663811.009 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-03-10T06:36:51.009Z,1520663811.009 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-10T06:36:51.009Z,1520663811.009 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-10T06:36:51.010Z,1520663811.010 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-10T06:36:51.384Z,1520663811.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.7 s old, using for 20.0 s.
2018-03-10T06:36:51.385Z,1520663811.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:36:51.409Z,1520663811.409 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-03-10T06:31:51.0Z
2018-03-10T06:36:51.409Z,1520663811.409 [Default:CheckIn:Read_GPS] Stopped
2018-03-10T06:36:51.409Z,1520663811.409 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-03-10T06:36:51.784Z,1520663811.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.1 s old, using for 20.0 s.
2018-03-10T06:36:51.785Z,1520663811.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:36:52.315Z,1520663812.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.6 s old, using for 20.0 s.
2018-03-10T06:36:52.316Z,1520663812.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:36:52.588Z,1520663812.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.9 s old, using for 20.0 s.
2018-03-10T06:36:52.589Z,1520663812.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:36:52.974Z,1520663812.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.3 s old, using for 20.0 s.
2018-03-10T06:36:52.975Z,1520663812.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:36:56.073Z,1520663816.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-03-10T06:36:56.074Z,1520663816.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:36:56.254Z,1520663816.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.5 s old, using for 20.0 s.
2018-03-10T06:36:56.254Z,1520663816.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:36:56.571Z,1520663816.571 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20180310T051512/Courier0032.lzma
2018-03-10T06:36:56.635Z,1520663816.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.9 s old, using for 20.0 s.
2018-03-10T06:36:56.636Z,1520663816.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:36:57.026Z,1520663817.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.3 s old, using for 20.0 s.
2018-03-10T06:36:57.027Z,1520663817.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:36:57.365Z,1520663817.365 [DataOverHttps](INFO): Moved sent file to Logs/20180310T051512/Courier0032.lzma.bak
2018-03-10T06:36:57.365Z,1520663817.365 [DataOverHttps](INFO): SBD MOMSN=8002353
2018-03-10T06:36:57.431Z,1520663817.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.7 s old, using for 20.0 s.
2018-03-10T06:36:57.432Z,1520663817.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:36:58.161Z,1520663818.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.5 s old, using for 20.0 s.
2018-03-10T06:36:58.162Z,1520663818.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:36:58.289Z,1520663818.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.6 s old, using for 20.0 s.
2018-03-10T06:36:58.290Z,1520663818.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:36:58.713Z,1520663818.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.0 s old, using for 20.0 s.
2018-03-10T06:36:58.714Z,1520663818.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:37:01.819Z,1520663821.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.1 s old, using for 20.0 s.
2018-03-10T06:37:01.820Z,1520663821.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:37:01.979Z,1520663821.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.3 s old, using for 20.0 s.
2018-03-10T06:37:01.980Z,1520663821.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:37:02.362Z,1520663822.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.7 s old, using for 20.0 s.
2018-03-10T06:37:02.363Z,1520663822.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:37:02.764Z,1520663822.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.1 s old, using for 20.0 s.
2018-03-10T06:37:02.765Z,1520663822.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:37:03.168Z,1520663823.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.5 s old, using for 20.0 s.
2018-03-10T06:37:03.169Z,1520663823.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:37:03.580Z,1520663823.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.9 s old, using for 20.0 s.
2018-03-10T06:37:03.581Z,1520663823.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:37:03.977Z,1520663823.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.3 s old, using for 20.0 s.
2018-03-10T06:37:03.978Z,1520663823.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:37:07.076Z,1520663827.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.4 s old, using for 20.0 s.
2018-03-10T06:37:07.077Z,1520663827.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:37:07.228Z,1520663827.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.5 s old, using for 20.0 s.
2018-03-10T06:37:07.229Z,1520663827.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:37:07.575Z,1520663827.575 [DataOverHttps](INFO): Sending 182 bytes from file Logs/20180310T051512/Express0033.lzma
2018-03-10T06:37:07.626Z,1520663827.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.9 s old, using for 20.0 s.
2018-03-10T06:37:07.627Z,1520663827.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:37:08.025Z,1520663828.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:37:08.374Z,1520663828.374 [DataOverHttps](INFO): Moved sent file to Logs/20180310T051512/Express0033.lzma.bak
2018-03-10T06:37:08.374Z,1520663828.374 [DataOverHttps](INFO): SBD MOMSN=8002355
2018-03-10T06:37:08.429Z,1520663828.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:37:09.162Z,1520663829.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:37:09.165Z,1520663829.165 [Default:CheckIn:Read_Iridium] Stopped
2018-03-10T06:37:09.165Z,1520663829.165 [Default:CheckIn:C.Wait] Running Loop=1
2018-03-10T06:37:09.165Z,1520663829.165 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-03-10T06:37:09.321Z,1520663829.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:37:09.726Z,1520663829.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:37:10.102Z,1520663830.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:37:10.537Z,1520663830.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:37:10.925Z,1520663830.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:37:11.312Z,1520663831.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:37:11.752Z,1520663831.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:37:12.145Z,1520663832.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:37:15.362Z,1520663835.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:37:15.509Z,1520663835.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:37:15.936Z,1520663835.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:37:16.313Z,1520663836.313 [BPC1](FAULT): Failed to initialize
2018-03-10T06:37:16.313Z,1520663836.313 [BPC1] Communications Fault, FailCount= 4
2018-03-10T06:37:16.313Z,1520663836.313 [BPC1](ERROR): Communications Fault
2018-03-10T06:37:16.345Z,1520663836.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:37:16.431Z,1520663836.431 [CBIT](ERROR): Communications Fault in component: BPC1
2018-03-10T06:37:16.718Z,1520663836.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:37:17.117Z,1520663837.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:37:17.543Z,1520663837.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:37:17.624Z,1520663837.624 [CBIT](INFO): Clearing failed state for component BPC1
2018-03-10T06:37:17.624Z,1520663837.624 [BPC1] No Fault, FailCount= 4
2018-03-10T06:37:17.996Z,1520663837.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:37:18.349Z,1520663838.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:37:18.718Z,1520663838.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:37:19.145Z,1520663839.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:37:19.524Z,1520663839.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:37:19.922Z,1520663839.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:37:20.349Z,1520663840.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:37:20.751Z,1520663840.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:37:21.153Z,1520663841.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:37:21.530Z,1520663841.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:37:21.927Z,1520663841.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:37:22.321Z,1520663842.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:37:22.722Z,1520663842.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:37:23.121Z,1520663843.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:37:23.615Z,1520663843.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:37:23.948Z,1520663843.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:37:24.350Z,1520663844.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:37:24.725Z,1520663844.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:37:25.133Z,1520663845.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:37:25.526Z,1520663845.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:37:25.929Z,1520663845.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:37:26.333Z,1520663846.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:37:26.741Z,1520663846.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:37:27.137Z,1520663847.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:37:27.534Z,1520663847.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:37:27.925Z,1520663847.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:37:28.328Z,1520663848.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:37:28.729Z,1520663848.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:37:29.125Z,1520663849.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:37:29.538Z,1520663849.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:37:29.934Z,1520663849.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:37:30.337Z,1520663850.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:37:30.729Z,1520663850.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:37:31.129Z,1520663851.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:37:31.525Z,1520663851.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:37:31.929Z,1520663851.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:37:32.333Z,1520663852.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:37:32.738Z,1520663852.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:37:33.137Z,1520663853.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:37:33.541Z,1520663853.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:37:33.926Z,1520663853.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:37:34.329Z,1520663854.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:37:34.729Z,1520663854.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:37:35.129Z,1520663855.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:37:35.539Z,1520663855.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:37:35.937Z,1520663855.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:37:36.345Z,1520663856.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:37:36.724Z,1520663856.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:37:37.123Z,1520663857.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:37:37.525Z,1520663857.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:37:37.926Z,1520663857.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:37:38.325Z,1520663858.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:37:38.737Z,1520663858.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:37:39.137Z,1520663859.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:37:39.545Z,1520663859.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:37:39.925Z,1520663859.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:37:40.336Z,1520663860.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:37:40.726Z,1520663860.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:37:41.133Z,1520663861.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:37:41.544Z,1520663861.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:37:41.937Z,1520663861.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:37:42.338Z,1520663862.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:37:42.732Z,1520663862.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:37:43.127Z,1520663863.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:37:43.531Z,1520663863.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:37:43.929Z,1520663863.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:37:44.327Z,1520663864.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:37:44.745Z,1520663864.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:37:45.144Z,1520663865.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:37:45.538Z,1520663865.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:37:45.938Z,1520663865.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:37:46.377Z,1520663866.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:37:46.772Z,1520663866.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:37:47.149Z,1520663867.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:37:47.581Z,1520663867.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:37:47.961Z,1520663867.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:37:48.337Z,1520663868.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:37:48.730Z,1520663868.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:37:49.136Z,1520663869.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:37:49.535Z,1520663869.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:37:49.960Z,1520663869.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:37:50.363Z,1520663870.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:37:50.793Z,1520663870.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:37:51.144Z,1520663871.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:37:51.545Z,1520663871.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:37:51.917Z,1520663871.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:37:52.352Z,1520663872.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:37:52.748Z,1520663872.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:37:53.138Z,1520663873.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:37:53.537Z,1520663873.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:37:53.936Z,1520663873.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:37:54.349Z,1520663874.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:37:54.735Z,1520663874.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:37:55.140Z,1520663875.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:37:55.518Z,1520663875.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:37:55.919Z,1520663875.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:37:56.318Z,1520663876.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:37:56.753Z,1520663876.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:37:57.148Z,1520663877.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:37:57.540Z,1520663877.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:37:57.921Z,1520663877.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:37:58.321Z,1520663878.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:37:58.718Z,1520663878.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:37:59.148Z,1520663879.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:37:59.553Z,1520663879.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:37:59.943Z,1520663879.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:38:00.346Z,1520663880.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:38:00.718Z,1520663880.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:38:01.153Z,1520663881.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:38:01.518Z,1520663881.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:38:02.000Z,1520663882.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:38:02.325Z,1520663882.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:38:02.747Z,1520663882.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:38:03.131Z,1520663883.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:38:03.566Z,1520663883.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:38:03.958Z,1520663883.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:38:04.328Z,1520663884.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:38:04.725Z,1520663884.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:38:05.125Z,1520663885.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:38:05.534Z,1520663885.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:38:05.934Z,1520663885.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:38:06.341Z,1520663886.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:38:06.726Z,1520663886.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:38:07.133Z,1520663887.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:38:07.525Z,1520663887.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:38:07.930Z,1520663887.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:38:08.337Z,1520663888.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:38:08.741Z,1520663888.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:38:09.135Z,1520663889.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:38:09.541Z,1520663889.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:38:12.677Z,1520663892.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:38:12.829Z,1520663892.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:38:13.227Z,1520663893.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:38:13.628Z,1520663893.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:38:14.025Z,1520663894.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:38:14.429Z,1520663894.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:38:14.832Z,1520663894.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:38:15.221Z,1520663895.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:38:15.623Z,1520663895.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:38:16.025Z,1520663896.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:38:16.425Z,1520663896.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:38:16.798Z,1520663896.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:38:17.216Z,1520663897.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:38:17.598Z,1520663897.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:38:18.001Z,1520663898.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:38:18.405Z,1520663898.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:38:18.823Z,1520663898.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:38:19.230Z,1520663899.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:38:19.631Z,1520663899.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:38:20.005Z,1520663900.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:38:20.401Z,1520663900.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:38:20.802Z,1520663900.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:38:21.203Z,1520663901.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:38:21.627Z,1520663901.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:38:22.031Z,1520663902.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:38:22.429Z,1520663902.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:38:22.802Z,1520663902.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:38:23.204Z,1520663903.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:38:23.602Z,1520663903.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:38:24.003Z,1520663904.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:38:24.403Z,1520663904.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:38:24.826Z,1520663904.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:38:25.237Z,1520663905.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:38:25.657Z,1520663905.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:38:26.044Z,1520663906.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:38:26.405Z,1520663906.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:38:26.806Z,1520663906.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:38:27.206Z,1520663907.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:38:27.634Z,1520663907.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:38:28.036Z,1520663908.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:38:28.432Z,1520663908.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:38:28.806Z,1520663908.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:38:29.206Z,1520663909.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:38:29.612Z,1520663909.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:38:30.013Z,1520663910.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:38:30.406Z,1520663910.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:38:30.811Z,1520663910.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:38:31.234Z,1520663911.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:38:31.639Z,1520663911.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:38:32.006Z,1520663912.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:38:32.406Z,1520663912.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:38:32.808Z,1520663912.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:38:33.206Z,1520663913.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:38:33.635Z,1520663913.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:38:34.039Z,1520663914.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:38:34.421Z,1520663914.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:38:34.810Z,1520663914.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:38:35.210Z,1520663915.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:38:35.610Z,1520663915.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:38:36.010Z,1520663916.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:38:36.415Z,1520663916.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:38:36.846Z,1520663916.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:38:37.215Z,1520663917.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:38:37.621Z,1520663917.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:38:38.014Z,1520663918.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:38:38.417Z,1520663918.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:38:38.845Z,1520663918.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:38:39.217Z,1520663919.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:38:39.619Z,1520663919.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:38:40.021Z,1520663920.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:38:40.424Z,1520663920.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:38:40.802Z,1520663920.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:38:41.202Z,1520663921.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:38:41.697Z,1520663921.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:38:42.021Z,1520663922.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:38:42.416Z,1520663922.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:38:42.821Z,1520663922.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:38:43.226Z,1520663923.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:38:43.623Z,1520663923.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:38:44.021Z,1520663924.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:38:44.421Z,1520663924.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:38:44.817Z,1520663924.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:38:45.217Z,1520663925.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:38:45.626Z,1520663925.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:38:46.028Z,1520663926.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:38:46.425Z,1520663926.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:38:46.821Z,1520663926.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:38:47.215Z,1520663927.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:38:47.622Z,1520663927.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:38:48.033Z,1520663928.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:38:48.414Z,1520663928.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:38:48.829Z,1520663928.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:38:49.224Z,1520663929.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:38:49.624Z,1520663929.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:38:50.015Z,1520663930.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:38:50.417Z,1520663930.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:38:50.827Z,1520663930.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:38:51.216Z,1520663931.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:38:51.623Z,1520663931.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:38:52.024Z,1520663932.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:38:52.421Z,1520663932.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:38:52.817Z,1520663932.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:38:53.221Z,1520663933.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:38:53.620Z,1520663933.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:38:54.020Z,1520663934.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:38:54.420Z,1520663934.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:38:54.829Z,1520663934.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:38:55.224Z,1520663935.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:38:55.634Z,1520663935.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:38:56.020Z,1520663936.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:38:56.419Z,1520663936.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:38:56.821Z,1520663936.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:38:57.219Z,1520663937.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:38:57.629Z,1520663937.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:38:58.028Z,1520663938.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:38:58.425Z,1520663938.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:38:58.825Z,1520663938.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:38:59.224Z,1520663939.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:38:59.619Z,1520663939.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:39:00.025Z,1520663940.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:39:00.398Z,1520663940.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:39:00.825Z,1520663940.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:39:01.224Z,1520663941.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:39:01.628Z,1520663941.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:39:02.020Z,1520663942.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:39:02.419Z,1520663942.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:39:02.828Z,1520663942.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:39:03.225Z,1520663943.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:39:03.645Z,1520663943.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:39:04.024Z,1520663944.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:39:04.429Z,1520663944.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:39:04.805Z,1520663944.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:39:05.201Z,1520663945.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:39:05.605Z,1520663945.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:39:06.025Z,1520663946.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:39:06.401Z,1520663946.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:39:06.824Z,1520663946.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:39:07.225Z,1520663947.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:39:07.632Z,1520663947.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:39:08.002Z,1520663948.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:39:08.402Z,1520663948.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:39:08.803Z,1520663948.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:39:09.202Z,1520663949.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:39:09.629Z,1520663949.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:39:12.778Z,1520663952.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:39:12.957Z,1520663952.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:39:13.337Z,1520663953.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:39:13.731Z,1520663953.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:39:14.136Z,1520663954.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:39:14.539Z,1520663954.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:39:14.936Z,1520663954.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:39:15.339Z,1520663955.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:39:15.738Z,1520663955.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:39:16.140Z,1520663956.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:39:16.535Z,1520663956.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:39:16.935Z,1520663956.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:39:17.339Z,1520663957.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:39:17.739Z,1520663957.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:39:18.138Z,1520663958.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:39:18.540Z,1520663958.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:39:18.938Z,1520663958.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:39:19.317Z,1520663959.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:39:19.738Z,1520663959.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:39:20.137Z,1520663960.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:39:20.538Z,1520663960.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:39:20.941Z,1520663960.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:39:21.344Z,1520663961.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:39:21.753Z,1520663961.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:39:22.117Z,1520663962.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:39:22.545Z,1520663962.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:39:22.921Z,1520663962.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:39:23.323Z,1520663963.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:39:23.753Z,1520663963.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:39:24.157Z,1520663964.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:39:24.530Z,1520663964.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:39:24.925Z,1520663964.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:39:25.325Z,1520663965.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:39:25.725Z,1520663965.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:39:26.125Z,1520663966.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:39:26.550Z,1520663966.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:39:26.950Z,1520663966.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:39:27.330Z,1520663967.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:39:27.726Z,1520663967.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:39:28.126Z,1520663968.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:39:28.526Z,1520663968.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:39:28.925Z,1520663968.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:39:29.327Z,1520663969.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:39:29.731Z,1520663969.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:39:30.130Z,1520663970.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:39:30.531Z,1520663970.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:39:30.926Z,1520663970.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:39:31.325Z,1520663971.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:39:31.728Z,1520663971.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:39:32.125Z,1520663972.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:39:32.549Z,1520663972.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:39:32.953Z,1520663972.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:39:33.336Z,1520663973.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:39:33.726Z,1520663973.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:39:34.126Z,1520663974.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:39:34.533Z,1520663974.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:39:34.937Z,1520663974.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:39:35.341Z,1520663975.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:39:35.732Z,1520663975.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:39:36.141Z,1520663976.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:39:36.537Z,1520663976.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:39:36.922Z,1520663976.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:39:37.326Z,1520663977.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:39:37.732Z,1520663977.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:39:38.122Z,1520663978.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:39:38.534Z,1520663978.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:39:38.940Z,1520663978.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:39:39.334Z,1520663979.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:39:39.725Z,1520663979.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:39:40.128Z,1520663980.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:39:40.525Z,1520663980.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:39:40.927Z,1520663980.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:39:41.327Z,1520663981.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:39:41.733Z,1520663981.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:39:42.134Z,1520663982.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:39:42.534Z,1520663982.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:39:42.924Z,1520663982.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:39:43.324Z,1520663983.324 [BPC1](ERROR): Bank B: No match for stick 5 serial number:1717 in the onboard configuration file.
2018-03-10T06:39:43.325Z,1520663983.325 [BPC1](ERROR): Failed to parse Bank B battery data
2018-03-10T06:39:43.325Z,1520663983.325 [BPC1] Data Fault, FailCount= 1
2018-03-10T06:39:43.325Z,1520663983.325 [BPC1](ERROR): Data Fault
2018-03-10T06:39:43.333Z,1520663983.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:39:43.408Z,1520663983.408 [CBIT](ERROR): Data Fault in component: BPC1
2018-03-10T06:39:43.731Z,1520663983.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:39:44.129Z,1520663984.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:39:44.537Z,1520663984.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:39:44.631Z,1520663984.631 [CBIT](INFO): Clearing failed state for component BPC1
2018-03-10T06:39:44.632Z,1520663984.632 [BPC1] No Fault, FailCount= 1
2018-03-10T06:39:45.008Z,1520663985.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:39:45.345Z,1520663985.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:39:45.726Z,1520663985.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:39:46.127Z,1520663986.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:39:46.525Z,1520663986.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:39:46.976Z,1520663986.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:39:47.356Z,1520663987.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:39:47.758Z,1520663987.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:39:48.168Z,1520663988.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:39:48.553Z,1520663988.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:39:48.921Z,1520663988.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:39:49.334Z,1520663989.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:39:49.737Z,1520663989.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:39:50.159Z,1520663990.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:39:50.609Z,1520663990.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:39:50.931Z,1520663990.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:39:51.331Z,1520663991.331 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:39:51.331Z,1520663991.331 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 28
2018-03-10T06:39:51.331Z,1520663991.331 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-03-10T06:39:51.333Z,1520663991.333 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:39:51.333Z,1520663991.333 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 28
2018-03-10T06:39:51.333Z,1520663991.333 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-03-10T06:39:51.335Z,1520663991.335 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:39:51.335Z,1520663991.335 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 28
2018-03-10T06:39:51.335Z,1520663991.335 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-10T06:39:51.435Z,1520663991.435 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-03-10T06:39:51.435Z,1520663991.435 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-03-10T06:39:51.435Z,1520663991.435 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-10T06:39:51.808Z,1520663991.808 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-03-10T06:39:51.808Z,1520663991.808 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 28
2018-03-10T06:39:51.809Z,1520663991.809 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-03-10T06:39:51.809Z,1520663991.809 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 28
2018-03-10T06:39:51.809Z,1520663991.809 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-10T06:39:51.809Z,1520663991.809 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 28
2018-03-10T06:39:52.127Z,1520663992.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-03-10T06:39:52.128Z,1520663992.128 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-03-10T06:39:52.128Z,1520663992.128 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-03-10T06:39:52.129Z,1520663992.129 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-03-10T06:39:52.129Z,1520663992.129 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-03-10T06:39:52.129Z,1520663992.129 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-03-10T06:39:52.130Z,1520663992.130 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-10T06:39:52.130Z,1520663992.130 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-10T06:39:52.130Z,1520663992.130 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-10T06:39:52.534Z,1520663992.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-03-10T06:39:52.535Z,1520663992.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:39:52.927Z,1520663992.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-03-10T06:39:52.928Z,1520663992.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:39:53.327Z,1520663993.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-03-10T06:39:53.328Z,1520663993.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:39:53.735Z,1520663993.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-03-10T06:39:53.736Z,1520663993.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:39:54.144Z,1520663994.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-03-10T06:39:54.145Z,1520663994.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:39:54.544Z,1520663994.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-03-10T06:39:54.545Z,1520663994.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:39:54.931Z,1520663994.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-03-10T06:39:54.932Z,1520663994.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:39:55.321Z,1520663995.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-03-10T06:39:55.322Z,1520663995.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:39:55.718Z,1520663995.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-03-10T06:39:55.720Z,1520663995.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:39:56.120Z,1520663996.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-03-10T06:39:56.121Z,1520663996.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:39:56.536Z,1520663996.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-03-10T06:39:56.537Z,1520663996.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:39:56.930Z,1520663996.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-03-10T06:39:56.931Z,1520663996.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:39:57.330Z,1520663997.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-03-10T06:39:57.331Z,1520663997.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:39:57.736Z,1520663997.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-03-10T06:39:57.737Z,1520663997.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:39:58.117Z,1520663998.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-03-10T06:39:58.118Z,1520663998.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:39:58.586Z,1520663998.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.3 s old, using for 20.0 s.
2018-03-10T06:39:58.587Z,1520663998.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:39:58.918Z,1520663998.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-03-10T06:39:58.919Z,1520663998.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:39:59.318Z,1520663999.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-03-10T06:39:59.319Z,1520663999.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:39:59.730Z,1520663999.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-03-10T06:39:59.732Z,1520663999.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:40:00.130Z,1520664000.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-03-10T06:40:00.131Z,1520664000.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:40:00.545Z,1520664000.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-03-10T06:40:00.546Z,1520664000.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:40:00.928Z,1520664000.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-03-10T06:40:00.929Z,1520664000.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:40:01.340Z,1520664001.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-03-10T06:40:01.341Z,1520664001.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:40:01.768Z,1520664001.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-03-10T06:40:01.769Z,1520664001.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:40:02.148Z,1520664002.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-03-10T06:40:02.149Z,1520664002.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:40:02.544Z,1520664002.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-03-10T06:40:02.545Z,1520664002.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:40:02.938Z,1520664002.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-03-10T06:40:02.939Z,1520664002.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:40:03.338Z,1520664003.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-03-10T06:40:03.340Z,1520664003.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:40:03.725Z,1520664003.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-03-10T06:40:03.726Z,1520664003.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:40:04.132Z,1520664004.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-03-10T06:40:04.133Z,1520664004.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:40:04.526Z,1520664004.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-03-10T06:40:04.528Z,1520664004.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:40:04.927Z,1520664004.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-03-10T06:40:04.928Z,1520664004.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:40:05.329Z,1520664005.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-03-10T06:40:05.330Z,1520664005.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:40:05.734Z,1520664005.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-03-10T06:40:05.735Z,1520664005.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:40:06.138Z,1520664006.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-03-10T06:40:06.139Z,1520664006.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:40:06.538Z,1520664006.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-03-10T06:40:06.539Z,1520664006.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:40:06.927Z,1520664006.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-03-10T06:40:06.928Z,1520664006.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:40:07.325Z,1520664007.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-03-10T06:40:07.326Z,1520664007.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:40:07.731Z,1520664007.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-03-10T06:40:07.732Z,1520664007.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:40:08.126Z,1520664008.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-03-10T06:40:08.126Z,1520664008.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:40:08.544Z,1520664008.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-03-10T06:40:08.545Z,1520664008.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:40:08.939Z,1520664008.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-03-10T06:40:08.940Z,1520664008.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:40:09.334Z,1520664009.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-03-10T06:40:09.336Z,1520664009.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:40:09.729Z,1520664009.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2018-03-10T06:40:09.730Z,1520664009.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:40:12.874Z,1520664012.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:40:13.044Z,1520664013.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:40:13.479Z,1520664013.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:40:13.868Z,1520664013.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:40:14.238Z,1520664014.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:40:14.641Z,1520664014.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:40:15.032Z,1520664015.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:40:15.430Z,1520664015.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:40:15.838Z,1520664015.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:40:16.261Z,1520664016.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:40:16.661Z,1520664016.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:40:17.029Z,1520664017.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:40:17.431Z,1520664017.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:40:17.845Z,1520664017.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:40:18.229Z,1520664018.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:40:18.646Z,1520664018.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:40:19.041Z,1520664019.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:40:19.460Z,1520664019.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:40:19.849Z,1520664019.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:40:20.263Z,1520664020.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:40:20.633Z,1520664020.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:40:21.033Z,1520664021.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:40:21.434Z,1520664021.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:40:21.840Z,1520664021.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:40:22.243Z,1520664022.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:40:22.657Z,1520664022.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:40:23.029Z,1520664023.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:40:23.437Z,1520664023.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:40:23.832Z,1520664023.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:40:24.238Z,1520664024.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:40:24.644Z,1520664024.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:40:25.044Z,1520664025.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:40:25.445Z,1520664025.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:40:25.845Z,1520664025.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:40:26.210Z,1520664026.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:40:26.637Z,1520664026.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:40:27.037Z,1520664027.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:40:27.440Z,1520664027.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:40:27.842Z,1520664027.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:40:28.246Z,1520664028.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:40:28.638Z,1520664028.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:40:29.040Z,1520664029.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:40:29.414Z,1520664029.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:40:29.836Z,1520664029.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:40:30.239Z,1520664030.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:40:30.657Z,1520664030.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:40:31.042Z,1520664031.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:40:31.457Z,1520664031.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:40:31.821Z,1520664031.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:40:32.245Z,1520664032.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:40:32.648Z,1520664032.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:40:33.056Z,1520664033.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:40:33.423Z,1520664033.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:40:33.853Z,1520664033.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:40:34.251Z,1520664034.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:40:34.658Z,1520664034.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:40:35.056Z,1520664035.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:40:35.446Z,1520664035.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:40:35.828Z,1520664035.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:40:36.226Z,1520664036.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:40:36.633Z,1520664036.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:40:37.052Z,1520664037.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:40:37.431Z,1520664037.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:40:37.832Z,1520664037.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:40:38.226Z,1520664038.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:40:38.645Z,1520664038.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:40:39.028Z,1520664039.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:40:39.427Z,1520664039.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:40:39.829Z,1520664039.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:40:40.250Z,1520664040.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:40:40.632Z,1520664040.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:40:41.026Z,1520664041.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:40:41.427Z,1520664041.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:40:41.845Z,1520664041.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:40:42.229Z,1520664042.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:40:42.651Z,1520664042.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:40:43.033Z,1520664043.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:40:43.452Z,1520664043.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:40:43.830Z,1520664043.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:40:44.227Z,1520664044.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:40:44.624Z,1520664044.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:40:45.071Z,1520664045.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:40:45.456Z,1520664045.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:40:45.852Z,1520664045.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:40:46.260Z,1520664046.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:40:46.649Z,1520664046.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:40:47.027Z,1520664047.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:40:47.426Z,1520664047.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:40:47.827Z,1520664047.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:40:48.250Z,1520664048.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:40:48.632Z,1520664048.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:40:49.030Z,1520664049.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:40:49.437Z,1520664049.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:40:49.851Z,1520664049.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:40:50.229Z,1520664050.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:40:50.626Z,1520664050.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:40:51.026Z,1520664051.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:40:51.451Z,1520664051.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:40:51.832Z,1520664051.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:40:52.235Z,1520664052.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:40:52.630Z,1520664052.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:40:53.051Z,1520664053.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:40:53.428Z,1520664053.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:40:53.828Z,1520664053.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:40:54.224Z,1520664054.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:40:54.650Z,1520664054.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:40:55.037Z,1520664055.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:40:55.437Z,1520664055.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:40:55.828Z,1520664055.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:40:56.252Z,1520664056.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:40:56.627Z,1520664056.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:40:57.036Z,1520664057.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:40:57.472Z,1520664057.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:40:57.869Z,1520664057.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:40:58.262Z,1520664058.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:40:58.635Z,1520664058.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:40:59.029Z,1520664059.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:40:59.445Z,1520664059.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:40:59.832Z,1520664059.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:41:00.229Z,1520664060.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:41:00.635Z,1520664060.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:41:01.050Z,1520664061.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:41:01.438Z,1520664061.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:41:01.842Z,1520664061.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:41:02.233Z,1520664062.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:41:02.645Z,1520664062.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:41:03.028Z,1520664063.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:41:03.429Z,1520664063.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:41:03.841Z,1520664063.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:41:04.268Z,1520664064.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:41:04.653Z,1520664064.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:41:05.029Z,1520664065.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:41:05.430Z,1520664065.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:41:05.845Z,1520664065.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:41:06.233Z,1520664066.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:41:06.641Z,1520664066.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:41:07.045Z,1520664067.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:41:07.454Z,1520664067.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:41:07.844Z,1520664067.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:41:08.229Z,1520664068.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:41:08.634Z,1520664068.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:41:09.048Z,1520664069.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:41:09.436Z,1520664069.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:41:09.845Z,1520664069.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:41:12.991Z,1520664072.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:41:13.149Z,1520664073.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:41:13.534Z,1520664073.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:41:13.920Z,1520664073.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:41:14.325Z,1520664074.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:41:14.747Z,1520664074.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:41:15.150Z,1520664075.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:41:15.547Z,1520664075.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:41:15.917Z,1520664075.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:41:16.316Z,1520664076.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:41:16.717Z,1520664076.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:41:17.125Z,1520664077.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:41:17.547Z,1520664077.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:41:17.946Z,1520664077.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:41:18.346Z,1520664078.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:41:18.721Z,1520664078.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:41:19.124Z,1520664079.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:41:19.525Z,1520664079.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:41:19.917Z,1520664079.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:41:20.326Z,1520664080.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:41:20.749Z,1520664080.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:41:21.130Z,1520664081.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:41:21.550Z,1520664081.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:41:21.921Z,1520664081.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:41:22.316Z,1520664082.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:41:22.717Z,1520664082.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:41:23.121Z,1520664083.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:41:23.551Z,1520664083.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:41:23.953Z,1520664083.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:41:24.350Z,1520664084.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:41:24.717Z,1520664084.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:41:25.124Z,1520664085.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:41:25.556Z,1520664085.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:41:25.934Z,1520664085.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:41:26.322Z,1520664086.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:41:26.734Z,1520664086.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:41:27.152Z,1520664087.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:41:27.532Z,1520664087.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:41:27.926Z,1520664087.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:41:28.326Z,1520664088.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:41:28.726Z,1520664088.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:41:29.126Z,1520664089.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:41:29.527Z,1520664089.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:41:29.931Z,1520664089.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:41:30.332Z,1520664090.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:41:30.725Z,1520664090.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:41:31.125Z,1520664091.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:41:31.525Z,1520664091.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:41:31.928Z,1520664091.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:41:32.353Z,1520664092.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:41:32.731Z,1520664092.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:41:33.154Z,1520664093.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:41:33.531Z,1520664093.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:41:33.926Z,1520664093.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:41:34.325Z,1520664094.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:41:34.726Z,1520664094.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:41:35.126Z,1520664095.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:41:35.531Z,1520664095.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:41:35.931Z,1520664095.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:41:36.331Z,1520664096.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:41:36.725Z,1520664096.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:41:37.126Z,1520664097.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:41:37.526Z,1520664097.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:41:37.933Z,1520664097.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:41:38.358Z,1520664098.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:41:38.737Z,1520664098.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:41:39.131Z,1520664099.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:41:39.531Z,1520664099.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:41:39.927Z,1520664099.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:41:40.327Z,1520664100.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:41:40.729Z,1520664100.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:41:41.125Z,1520664101.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:41:41.531Z,1520664101.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:41:41.937Z,1520664101.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:41:42.337Z,1520664102.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:41:42.727Z,1520664102.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:41:43.134Z,1520664103.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:41:43.545Z,1520664103.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:41:43.929Z,1520664103.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:41:44.326Z,1520664104.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:41:44.741Z,1520664104.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:41:45.135Z,1520664105.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:41:45.534Z,1520664105.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:41:45.933Z,1520664105.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:41:46.328Z,1520664106.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:41:46.734Z,1520664106.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:41:47.133Z,1520664107.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:41:47.548Z,1520664107.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:41:47.944Z,1520664107.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:41:48.348Z,1520664108.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:41:48.720Z,1520664108.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:41:49.142Z,1520664109.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:41:49.591Z,1520664109.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:41:49.956Z,1520664109.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:41:50.360Z,1520664110.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:41:50.777Z,1520664110.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:41:51.165Z,1520664111.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:41:51.551Z,1520664111.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:41:51.928Z,1520664111.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:41:52.322Z,1520664112.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:41:52.722Z,1520664112.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:41:53.121Z,1520664113.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:41:53.555Z,1520664113.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:41:53.951Z,1520664113.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:41:54.351Z,1520664114.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:41:54.726Z,1520664114.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:41:55.123Z,1520664115.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:41:55.525Z,1520664115.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:41:55.926Z,1520664115.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:41:56.329Z,1520664116.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:41:56.731Z,1520664116.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:41:57.131Z,1520664117.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:41:57.538Z,1520664117.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:41:57.925Z,1520664117.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:41:58.328Z,1520664118.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:41:58.727Z,1520664118.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:41:59.127Z,1520664119.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:41:59.531Z,1520664119.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:41:59.935Z,1520664119.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:42:00.332Z,1520664120.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:42:00.727Z,1520664120.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:42:01.125Z,1520664121.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:42:01.526Z,1520664121.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:42:01.935Z,1520664121.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:42:02.362Z,1520664122.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:42:02.741Z,1520664122.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:42:03.142Z,1520664123.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:42:03.567Z,1520664123.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:42:03.926Z,1520664123.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:42:04.327Z,1520664124.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:42:04.729Z,1520664124.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:42:05.126Z,1520664125.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:42:05.541Z,1520664125.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:42:05.945Z,1520664125.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:42:06.338Z,1520664126.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:42:06.730Z,1520664126.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:42:07.127Z,1520664127.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:42:07.525Z,1520664127.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:42:07.929Z,1520664127.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:42:08.333Z,1520664128.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:42:08.737Z,1520664128.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:42:09.145Z,1520664129.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:42:09.541Z,1520664129.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:42:09.544Z,1520664129.544 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-03-10T06:42:09.544Z,1520664129.544 [Default:CheckIn:C.Wait] Stopped
2018-03-10T06:42:09.544Z,1520664129.544 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-03-10T06:42:09.544Z,1520664129.544 [Default:CheckIn:D] Running Loop=1
2018-03-10T06:42:09.930Z,1520664129.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:42:09.933Z,1520664129.933 [Default:CheckIn:D] Stopped
2018-03-10T06:42:09.933Z,1520664129.933 [Default:CheckIn:E] Running Loop=1
2018-03-10T06:42:13.072Z,1520664133.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:42:13.075Z,1520664133.075 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 82.866878 min 
2018-03-10T06:42:13.075Z,1520664133.075 [Default:CheckIn:E] Stopped
2018-03-10T06:42:13.075Z,1520664133.075 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-03-10T06:42:13.076Z,1520664133.076 [Default:CheckIn] Stopped
2018-03-10T06:42:13.076Z,1520664133.076 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-03-10T06:42:13.076Z,1520664133.076 [Default:CheckIn](INFO): Running loop #9
2018-03-10T06:42:13.076Z,1520664133.076 [Default:CheckIn] Running Loop=9
2018-03-10T06:42:13.076Z,1520664133.076 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-03-10T06:42:13.076Z,1520664133.076 [Default:CheckIn:Read_GPS] Running Loop=1
2018-03-10T06:42:13.228Z,1520664133.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:42:13.631Z,1520664133.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:42:14.046Z,1520664134.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:42:14.449Z,1520664134.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:42:14.809Z,1520664134.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:42:15.211Z,1520664135.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:42:15.635Z,1520664135.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:42:16.041Z,1520664136.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:42:16.410Z,1520664136.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:42:16.840Z,1520664136.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:42:17.239Z,1520664137.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:42:17.639Z,1520664137.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:42:18.014Z,1520664138.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:42:18.414Z,1520664138.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:42:18.815Z,1520664138.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:42:19.211Z,1520664139.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:42:19.619Z,1520664139.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:42:20.020Z,1520664140.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:42:20.443Z,1520664140.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:42:20.814Z,1520664140.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:42:21.216Z,1520664141.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:42:21.612Z,1520664141.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:42:22.014Z,1520664142.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:42:22.416Z,1520664142.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:42:22.816Z,1520664142.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:42:23.219Z,1520664143.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:42:23.619Z,1520664143.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:42:24.014Z,1520664144.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:42:24.414Z,1520664144.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:42:24.816Z,1520664144.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:42:25.217Z,1520664145.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:42:25.619Z,1520664145.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:42:26.027Z,1520664146.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:42:26.425Z,1520664146.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:42:26.837Z,1520664146.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:42:27.225Z,1520664147.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:42:27.610Z,1520664147.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:42:28.063Z,1520664148.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:42:28.449Z,1520664148.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:42:28.827Z,1520664148.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:42:29.233Z,1520664149.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:42:29.629Z,1520664149.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:42:30.028Z,1520664150.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:42:30.415Z,1520664150.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:42:30.820Z,1520664150.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:42:31.213Z,1520664151.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:42:31.627Z,1520664151.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:42:32.027Z,1520664152.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:42:32.425Z,1520664152.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:42:32.815Z,1520664152.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:42:33.230Z,1520664153.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:42:33.613Z,1520664153.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:42:34.016Z,1520664154.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:42:34.431Z,1520664154.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:42:34.833Z,1520664154.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:42:35.227Z,1520664155.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:42:35.633Z,1520664155.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:42:36.016Z,1520664156.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:42:36.416Z,1520664156.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:42:36.818Z,1520664156.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:42:37.216Z,1520664157.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:42:37.626Z,1520664157.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:42:38.027Z,1520664158.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:42:38.429Z,1520664158.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:42:38.816Z,1520664158.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:42:39.225Z,1520664159.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:42:39.625Z,1520664159.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:42:40.023Z,1520664160.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:42:40.453Z,1520664160.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:42:40.834Z,1520664160.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:42:41.268Z,1520664161.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:42:41.632Z,1520664161.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:42:42.021Z,1520664162.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:42:42.425Z,1520664162.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:42:42.819Z,1520664162.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:42:43.214Z,1520664163.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:42:43.627Z,1520664163.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:42:44.029Z,1520664164.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:42:44.427Z,1520664164.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:42:44.821Z,1520664164.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:42:45.225Z,1520664165.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:42:45.625Z,1520664165.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:42:46.021Z,1520664166.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:42:46.425Z,1520664166.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:42:46.828Z,1520664166.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:42:47.227Z,1520664167.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:42:47.628Z,1520664167.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:42:48.025Z,1520664168.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:42:48.421Z,1520664168.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:42:48.821Z,1520664168.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:42:49.221Z,1520664169.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:42:49.627Z,1520664169.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:42:50.033Z,1520664170.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:42:50.433Z,1520664170.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:42:50.825Z,1520664170.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:42:51.218Z,1520664171.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:42:51.625Z,1520664171.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:42:52.025Z,1520664172.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:42:52.429Z,1520664172.429 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:42:52.429Z,1520664172.429 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 29
2018-03-10T06:42:52.429Z,1520664172.429 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-03-10T06:42:52.431Z,1520664172.431 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:42:52.431Z,1520664172.431 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 29
2018-03-10T06:42:52.431Z,1520664172.431 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-03-10T06:42:52.433Z,1520664172.433 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:42:52.433Z,1520664172.433 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 29
2018-03-10T06:42:52.433Z,1520664172.433 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-10T06:42:52.511Z,1520664172.511 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-03-10T06:42:52.512Z,1520664172.512 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-03-10T06:42:52.512Z,1520664172.512 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-10T06:42:52.935Z,1520664172.935 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-03-10T06:42:52.935Z,1520664172.935 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 29
2018-03-10T06:42:52.936Z,1520664172.936 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-03-10T06:42:52.936Z,1520664172.936 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 29
2018-03-10T06:42:52.936Z,1520664172.936 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-10T06:42:52.936Z,1520664172.936 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 29
2018-03-10T06:42:53.236Z,1520664173.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-03-10T06:42:53.236Z,1520664173.236 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-03-10T06:42:53.237Z,1520664173.237 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-03-10T06:42:53.237Z,1520664173.237 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-03-10T06:42:53.237Z,1520664173.237 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-03-10T06:42:53.238Z,1520664173.238 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-03-10T06:42:53.238Z,1520664173.238 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-10T06:42:53.238Z,1520664173.238 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-10T06:42:53.239Z,1520664173.239 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-10T06:42:53.630Z,1520664173.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-03-10T06:42:53.632Z,1520664173.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:42:54.040Z,1520664174.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-03-10T06:42:54.041Z,1520664174.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:42:54.436Z,1520664174.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-03-10T06:42:54.437Z,1520664174.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:42:54.824Z,1520664174.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-03-10T06:42:54.825Z,1520664174.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:42:55.205Z,1520664175.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-03-10T06:42:55.206Z,1520664175.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:42:55.631Z,1520664175.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-03-10T06:42:55.632Z,1520664175.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:42:56.030Z,1520664176.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-03-10T06:42:56.031Z,1520664176.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:42:56.428Z,1520664176.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-03-10T06:42:56.429Z,1520664176.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:42:56.828Z,1520664176.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-03-10T06:42:56.829Z,1520664176.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:42:57.208Z,1520664177.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-03-10T06:42:57.209Z,1520664177.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:42:57.606Z,1520664177.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-03-10T06:42:57.607Z,1520664177.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:42:58.012Z,1520664178.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-03-10T06:42:58.013Z,1520664178.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:42:58.412Z,1520664178.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-03-10T06:42:58.413Z,1520664178.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:42:58.836Z,1520664178.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-03-10T06:42:58.837Z,1520664178.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:42:59.238Z,1520664179.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-03-10T06:42:59.239Z,1520664179.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:42:59.639Z,1520664179.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-03-10T06:42:59.640Z,1520664179.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:43:00.015Z,1520664180.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-03-10T06:43:00.016Z,1520664180.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:43:00.410Z,1520664180.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-03-10T06:43:00.411Z,1520664180.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:43:00.810Z,1520664180.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-03-10T06:43:00.811Z,1520664180.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:43:01.210Z,1520664181.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-03-10T06:43:01.211Z,1520664181.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:43:01.618Z,1520664181.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-03-10T06:43:01.632Z,1520664181.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:43:02.040Z,1520664182.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-03-10T06:43:02.041Z,1520664182.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:43:02.437Z,1520664182.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-03-10T06:43:02.438Z,1520664182.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:43:02.809Z,1520664182.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-03-10T06:43:02.810Z,1520664182.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:43:03.210Z,1520664183.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-03-10T06:43:03.211Z,1520664183.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:43:03.610Z,1520664183.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-03-10T06:43:03.611Z,1520664183.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:43:04.010Z,1520664184.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-03-10T06:43:04.011Z,1520664184.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:43:04.411Z,1520664184.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-03-10T06:43:04.412Z,1520664184.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:43:04.832Z,1520664184.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-03-10T06:43:04.833Z,1520664184.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:43:05.240Z,1520664185.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-03-10T06:43:05.241Z,1520664185.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:43:05.648Z,1520664185.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-03-10T06:43:05.649Z,1520664185.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:43:06.014Z,1520664186.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-03-10T06:43:06.014Z,1520664186.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:43:06.413Z,1520664186.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-03-10T06:43:06.414Z,1520664186.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:43:06.821Z,1520664186.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-03-10T06:43:06.822Z,1520664186.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:43:07.248Z,1520664187.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-03-10T06:43:07.249Z,1520664187.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:43:07.618Z,1520664187.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-03-10T06:43:07.619Z,1520664187.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:43:08.024Z,1520664188.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-03-10T06:43:08.025Z,1520664188.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:43:08.419Z,1520664188.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-03-10T06:43:08.420Z,1520664188.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:43:08.814Z,1520664188.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-03-10T06:43:08.815Z,1520664188.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:43:09.218Z,1520664189.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-03-10T06:43:09.219Z,1520664189.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:43:09.610Z,1520664189.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-03-10T06:43:09.612Z,1520664189.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:43:10.017Z,1520664190.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-03-10T06:43:10.018Z,1520664190.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:43:13.116Z,1520664193.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:43:13.313Z,1520664193.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:43:13.674Z,1520664193.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:43:14.091Z,1520664194.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:43:14.462Z,1520664194.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:43:14.869Z,1520664194.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:43:15.268Z,1520664195.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:43:15.668Z,1520664195.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:43:16.068Z,1520664196.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:43:16.473Z,1520664196.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:43:16.866Z,1520664196.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:43:17.264Z,1520664197.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:43:17.674Z,1520664197.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:43:18.095Z,1520664198.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:43:18.473Z,1520664198.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:43:18.872Z,1520664198.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:43:19.274Z,1520664199.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:43:19.699Z,1520664199.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:43:20.070Z,1520664200.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:43:20.477Z,1520664200.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:43:20.869Z,1520664200.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:43:21.271Z,1520664201.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:43:21.669Z,1520664201.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:43:22.062Z,1520664202.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:43:22.472Z,1520664202.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:43:22.877Z,1520664202.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:43:23.274Z,1520664203.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:43:23.662Z,1520664203.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:43:24.064Z,1520664204.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:43:24.481Z,1520664204.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:43:24.873Z,1520664204.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:43:25.274Z,1520664205.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:43:25.663Z,1520664205.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:43:26.065Z,1520664206.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:43:26.474Z,1520664206.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:43:26.877Z,1520664206.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:43:27.273Z,1520664207.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:43:27.666Z,1520664207.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:43:28.064Z,1520664208.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:43:28.480Z,1520664208.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:43:28.873Z,1520664208.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:43:29.281Z,1520664209.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:43:29.667Z,1520664209.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:43:30.071Z,1520664210.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:43:30.504Z,1520664210.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:43:30.874Z,1520664210.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:43:31.274Z,1520664211.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:43:31.673Z,1520664211.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:43:32.068Z,1520664212.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:43:32.471Z,1520664212.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:43:32.874Z,1520664212.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:43:33.281Z,1520664213.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:43:33.673Z,1520664213.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:43:34.065Z,1520664214.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:43:34.417Z,1520664214.417 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-03-10T06:43:34.417Z,1520664214.417 [NAL9602] Data Fault, FailCount= 4
2018-03-10T06:43:34.417Z,1520664214.417 [NAL9602](ERROR): Data Fault
2018-03-10T06:43:34.477Z,1520664214.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:43:34.551Z,1520664214.551 [CBIT](ERROR): Data Fault in component: NAL9602
2018-03-10T06:43:34.824Z,1520664214.824 [NAL9602](INFO): Powering down
2018-03-10T06:43:34.872Z,1520664214.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:43:35.265Z,1520664215.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:43:35.665Z,1520664215.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:43:35.751Z,1520664215.751 [CBIT](INFO): Clearing failed state for component NAL9602
2018-03-10T06:43:35.751Z,1520664215.751 [NAL9602] No Fault, FailCount= 4
2018-03-10T06:43:36.064Z,1520664216.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:43:36.467Z,1520664216.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:43:36.864Z,1520664216.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:43:37.263Z,1520664217.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:43:37.665Z,1520664217.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:43:38.064Z,1520664218.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:43:38.463Z,1520664218.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:43:38.868Z,1520664218.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:43:39.266Z,1520664219.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:43:39.663Z,1520664219.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:43:40.072Z,1520664220.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:43:40.472Z,1520664220.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:43:40.861Z,1520664220.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:43:41.264Z,1520664221.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:43:41.665Z,1520664221.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:43:42.064Z,1520664222.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:43:42.472Z,1520664222.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:43:42.871Z,1520664222.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:43:43.267Z,1520664223.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:43:43.667Z,1520664223.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:43:44.096Z,1520664224.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:43:44.471Z,1520664224.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:43:44.885Z,1520664224.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:43:45.293Z,1520664225.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:43:45.705Z,1520664225.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:43:46.113Z,1520664226.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:43:46.461Z,1520664226.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:43:46.853Z,1520664226.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:43:47.292Z,1520664227.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:43:47.676Z,1520664227.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:43:48.068Z,1520664228.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:43:48.477Z,1520664228.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:43:48.856Z,1520664228.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:43:49.277Z,1520664229.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:43:49.690Z,1520664229.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:43:50.059Z,1520664230.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:43:50.458Z,1520664230.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:43:50.862Z,1520664230.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:43:51.258Z,1520664231.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:43:51.659Z,1520664231.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:43:52.058Z,1520664232.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:43:52.458Z,1520664232.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:43:52.858Z,1520664232.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:43:53.258Z,1520664233.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:43:53.665Z,1520664233.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:43:54.065Z,1520664234.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:43:54.458Z,1520664234.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:43:54.866Z,1520664234.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:43:55.289Z,1520664235.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:43:55.664Z,1520664235.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:43:56.063Z,1520664236.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:43:56.463Z,1520664236.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:43:56.883Z,1520664236.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:43:57.277Z,1520664237.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:43:57.654Z,1520664237.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:43:58.062Z,1520664238.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:43:58.465Z,1520664238.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:43:58.864Z,1520664238.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:43:59.262Z,1520664239.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:43:59.661Z,1520664239.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:44:00.053Z,1520664240.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:44:00.463Z,1520664240.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:44:00.863Z,1520664240.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:44:01.254Z,1520664241.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:44:01.664Z,1520664241.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:44:02.063Z,1520664242.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:44:02.463Z,1520664242.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:44:02.862Z,1520664242.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:44:03.262Z,1520664243.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:44:03.662Z,1520664243.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:44:04.060Z,1520664244.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:44:04.462Z,1520664244.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:44:04.865Z,1520664244.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:44:05.224Z,1520664245.224 [NAL9602](INFO): Powering up NAL9602
2018-03-10T06:44:05.277Z,1520664245.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:44:05.662Z,1520664245.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:44:06.062Z,1520664246.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:44:06.464Z,1520664246.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:44:06.861Z,1520664246.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:44:07.271Z,1520664247.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:44:07.681Z,1520664247.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:44:08.061Z,1520664248.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:44:08.461Z,1520664248.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:44:08.862Z,1520664248.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:44:09.261Z,1520664249.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:44:09.665Z,1520664249.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:44:10.081Z,1520664250.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:44:13.165Z,1520664253.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:44:13.312Z,1520664253.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:44:13.708Z,1520664253.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:44:14.086Z,1520664254.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:44:14.489Z,1520664254.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:44:14.890Z,1520664254.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:44:15.285Z,1520664255.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:44:15.736Z,1520664255.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:44:16.058Z,1520664256.058 [NAL9602](INFO): NAL9602 initialized
2018-03-10T06:44:16.103Z,1520664256.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:44:16.499Z,1520664256.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:44:16.906Z,1520664256.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:44:17.303Z,1520664257.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:44:17.712Z,1520664257.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:44:18.097Z,1520664258.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:44:18.562Z,1520664258.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:44:18.891Z,1520664258.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:44:19.293Z,1520664259.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:44:19.696Z,1520664259.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:44:20.121Z,1520664260.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:44:20.517Z,1520664260.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:44:20.908Z,1520664260.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:44:21.317Z,1520664261.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:44:21.690Z,1520664261.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:44:22.100Z,1520664262.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:44:22.526Z,1520664262.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:44:22.924Z,1520664262.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:44:23.306Z,1520664263.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:44:23.723Z,1520664263.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:44:24.096Z,1520664264.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:44:24.497Z,1520664264.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:44:24.899Z,1520664264.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:44:25.295Z,1520664265.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:44:25.736Z,1520664265.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:44:26.103Z,1520664266.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:44:26.524Z,1520664266.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:44:26.925Z,1520664266.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:44:27.298Z,1520664267.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:44:27.698Z,1520664267.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:44:28.097Z,1520664268.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:44:28.498Z,1520664268.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:44:28.924Z,1520664268.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:44:29.302Z,1520664269.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:44:29.704Z,1520664269.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:44:30.096Z,1520664270.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:44:30.498Z,1520664270.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:44:30.907Z,1520664270.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:44:31.298Z,1520664271.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:44:31.697Z,1520664271.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:44:32.110Z,1520664272.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:44:32.533Z,1520664272.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:44:32.913Z,1520664272.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:44:33.303Z,1520664273.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:44:33.697Z,1520664273.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:44:34.102Z,1520664274.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:44:34.506Z,1520664274.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:44:34.933Z,1520664274.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:44:35.311Z,1520664275.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:44:35.711Z,1520664275.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:44:36.105Z,1520664276.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:44:36.498Z,1520664276.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:44:36.900Z,1520664276.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:44:37.303Z,1520664277.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:44:37.698Z,1520664277.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:44:38.112Z,1520664278.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:44:38.510Z,1520664278.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:44:38.909Z,1520664278.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:44:39.300Z,1520664279.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:44:39.700Z,1520664279.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:44:40.100Z,1520664280.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:44:40.502Z,1520664280.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:44:40.917Z,1520664280.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:44:41.313Z,1520664281.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:44:41.717Z,1520664281.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:44:42.103Z,1520664282.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:44:42.498Z,1520664282.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:44:42.900Z,1520664282.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:44:43.303Z,1520664283.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:44:43.704Z,1520664283.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:44:44.118Z,1520664284.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:44:44.518Z,1520664284.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:44:44.933Z,1520664284.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:44:45.303Z,1520664285.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:44:45.702Z,1520664285.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:44:46.104Z,1520664286.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:44:46.504Z,1520664286.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:44:46.918Z,1520664286.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:44:47.329Z,1520664287.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:44:47.712Z,1520664287.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:44:48.106Z,1520664288.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:44:48.505Z,1520664288.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:44:48.909Z,1520664288.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:44:49.313Z,1520664289.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:44:49.717Z,1520664289.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:44:50.119Z,1520664290.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:44:50.518Z,1520664290.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:44:50.917Z,1520664290.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:44:51.289Z,1520664291.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:44:51.690Z,1520664291.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:44:52.097Z,1520664292.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:44:52.490Z,1520664292.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:44:52.919Z,1520664292.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:44:53.318Z,1520664293.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:44:53.716Z,1520664293.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:44:54.090Z,1520664294.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:44:54.517Z,1520664294.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:44:54.891Z,1520664294.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:44:55.297Z,1520664295.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:44:55.697Z,1520664295.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:44:56.125Z,1520664296.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:44:56.514Z,1520664296.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:44:56.914Z,1520664296.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:44:57.320Z,1520664297.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:44:57.721Z,1520664297.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:44:58.094Z,1520664298.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:44:58.493Z,1520664298.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:44:58.918Z,1520664298.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:44:59.333Z,1520664299.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:44:59.730Z,1520664299.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:45:00.097Z,1520664300.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:45:00.498Z,1520664300.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:45:00.898Z,1520664300.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:45:01.298Z,1520664301.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:45:01.697Z,1520664301.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:45:02.103Z,1520664302.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:45:02.527Z,1520664302.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:45:02.910Z,1520664302.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:45:03.298Z,1520664303.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:45:03.694Z,1520664303.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:45:04.098Z,1520664304.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:45:04.497Z,1520664304.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:45:04.927Z,1520664304.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:45:05.309Z,1520664305.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:45:05.703Z,1520664305.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:45:06.097Z,1520664306.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:45:06.497Z,1520664306.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:45:06.898Z,1520664306.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:45:07.298Z,1520664307.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:45:07.697Z,1520664307.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:45:08.103Z,1520664308.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:45:08.510Z,1520664308.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:45:08.902Z,1520664308.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:45:09.298Z,1520664309.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:45:09.703Z,1520664309.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:45:10.129Z,1520664310.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:45:13.199Z,1520664313.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:45:13.353Z,1520664313.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:45:13.750Z,1520664313.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:45:14.148Z,1520664314.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:45:14.535Z,1520664314.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:45:14.935Z,1520664314.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:45:15.338Z,1520664315.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:45:15.738Z,1520664315.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:45:16.148Z,1520664316.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:45:16.548Z,1520664316.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:45:16.948Z,1520664316.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:45:17.341Z,1520664317.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:45:17.738Z,1520664317.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:45:18.141Z,1520664318.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:45:18.539Z,1520664318.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:45:18.949Z,1520664318.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:45:19.349Z,1520664319.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:45:19.749Z,1520664319.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:45:20.145Z,1520664320.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:45:20.538Z,1520664320.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:45:20.937Z,1520664320.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:45:21.339Z,1520664321.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:45:21.743Z,1520664321.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:45:22.165Z,1520664322.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:45:22.552Z,1520664322.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:45:22.953Z,1520664322.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:45:23.337Z,1520664323.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:45:23.739Z,1520664323.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:45:24.133Z,1520664324.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:45:24.535Z,1520664324.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:45:24.944Z,1520664324.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:45:25.344Z,1520664325.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:45:25.748Z,1520664325.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:45:25.827Z,1520664325.827 [CBIT](DEBUG): EFC running - data check-sum false
2018-03-10T06:45:26.136Z,1520664326.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:45:26.545Z,1520664326.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:45:26.945Z,1520664326.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:45:27.335Z,1520664327.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:45:27.738Z,1520664327.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:45:28.147Z,1520664328.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:45:28.547Z,1520664328.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:45:28.942Z,1520664328.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:45:29.332Z,1520664329.332 [BPC1](ERROR): Failed to receive battery data
2018-03-10T06:45:29.333Z,1520664329.333 [BPC1] Communications Fault, FailCount= 1
2018-03-10T06:45:29.333Z,1520664329.333 [BPC1](ERROR): Communications Fault
2018-03-10T06:45:29.340Z,1520664329.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:45:29.415Z,1520664329.415 [CBIT](ERROR): Communications Fault in component: BPC1
2018-03-10T06:45:29.744Z,1520664329.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:45:30.138Z,1520664330.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:45:30.543Z,1520664330.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:45:30.620Z,1520664330.620 [CBIT](INFO): Clearing failed state for component BPC1
2018-03-10T06:45:30.620Z,1520664330.620 [BPC1] No Fault, FailCount= 1
2018-03-10T06:45:30.998Z,1520664330.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:45:31.347Z,1520664331.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:45:31.746Z,1520664331.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:45:32.144Z,1520664332.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:45:32.549Z,1520664332.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:45:32.941Z,1520664332.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:45:33.345Z,1520664333.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:45:33.743Z,1520664333.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:45:34.146Z,1520664334.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:45:34.551Z,1520664334.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:45:34.953Z,1520664334.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:45:35.338Z,1520664335.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:45:35.725Z,1520664335.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:45:36.122Z,1520664336.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:45:36.549Z,1520664336.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:45:36.946Z,1520664336.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:45:37.357Z,1520664337.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:45:37.753Z,1520664337.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:45:38.151Z,1520664338.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:45:38.546Z,1520664338.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:45:38.925Z,1520664338.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:45:39.351Z,1520664339.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:45:39.725Z,1520664339.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:45:40.153Z,1520664340.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:45:40.548Z,1520664340.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:45:40.953Z,1520664340.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:45:41.325Z,1520664341.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:45:41.725Z,1520664341.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:45:42.127Z,1520664342.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:45:42.525Z,1520664342.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:45:42.956Z,1520664342.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:45:43.346Z,1520664343.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:45:43.749Z,1520664343.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:45:44.126Z,1520664344.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:45:44.549Z,1520664344.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:45:44.925Z,1520664344.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:45:45.329Z,1520664345.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:45:45.733Z,1520664345.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:45:46.134Z,1520664346.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:45:46.611Z,1520664346.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:45:46.973Z,1520664346.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:45:47.326Z,1520664347.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:45:47.788Z,1520664347.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:45:48.139Z,1520664348.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:45:48.539Z,1520664348.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:45:48.952Z,1520664348.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:45:49.345Z,1520664349.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:45:49.753Z,1520664349.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:45:50.191Z,1520664350.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:45:50.553Z,1520664350.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:45:50.944Z,1520664350.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:45:51.342Z,1520664351.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:45:51.749Z,1520664351.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:45:52.147Z,1520664352.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:45:52.548Z,1520664352.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:45:52.948Z,1520664352.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:45:53.341Z,1520664353.341 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:45:53.341Z,1520664353.341 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 30
2018-03-10T06:45:53.341Z,1520664353.341 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-03-10T06:45:53.347Z,1520664353.347 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:45:53.347Z,1520664353.347 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 30
2018-03-10T06:45:53.347Z,1520664353.347 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-03-10T06:45:53.349Z,1520664353.349 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:45:53.349Z,1520664353.349 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 30
2018-03-10T06:45:53.349Z,1520664353.349 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-10T06:45:53.435Z,1520664353.435 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-03-10T06:45:53.435Z,1520664353.435 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-03-10T06:45:53.435Z,1520664353.435 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-10T06:45:53.835Z,1520664353.835 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-03-10T06:45:53.835Z,1520664353.835 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 30
2018-03-10T06:45:53.836Z,1520664353.836 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-03-10T06:45:53.836Z,1520664353.836 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 30
2018-03-10T06:45:53.837Z,1520664353.837 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-10T06:45:53.837Z,1520664353.837 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 30
2018-03-10T06:45:54.126Z,1520664354.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-03-10T06:45:54.126Z,1520664354.126 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-03-10T06:45:54.143Z,1520664354.143 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-03-10T06:45:54.143Z,1520664354.143 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-03-10T06:45:54.144Z,1520664354.144 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-03-10T06:45:54.144Z,1520664354.144 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-03-10T06:45:54.144Z,1520664354.144 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-10T06:45:54.145Z,1520664354.145 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-10T06:45:54.145Z,1520664354.145 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-10T06:45:54.528Z,1520664354.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-03-10T06:45:54.529Z,1520664354.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:45:54.956Z,1520664354.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-03-10T06:45:54.957Z,1520664354.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:45:55.346Z,1520664355.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-03-10T06:45:55.347Z,1520664355.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:45:55.748Z,1520664355.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-03-10T06:45:55.749Z,1520664355.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:45:56.130Z,1520664356.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-03-10T06:45:56.131Z,1520664356.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:45:56.552Z,1520664356.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-03-10T06:45:56.553Z,1520664356.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:45:56.929Z,1520664356.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-03-10T06:45:56.930Z,1520664356.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:45:57.331Z,1520664357.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-03-10T06:45:57.332Z,1520664357.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:45:57.730Z,1520664357.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-03-10T06:45:57.730Z,1520664357.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:45:58.138Z,1520664358.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-03-10T06:45:58.155Z,1520664358.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:45:58.561Z,1520664358.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-03-10T06:45:58.562Z,1520664358.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:45:58.930Z,1520664358.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-03-10T06:45:58.931Z,1520664358.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:45:59.330Z,1520664359.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-03-10T06:45:59.330Z,1520664359.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:45:59.729Z,1520664359.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-03-10T06:45:59.730Z,1520664359.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:46:00.127Z,1520664360.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-03-10T06:46:00.128Z,1520664360.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:46:00.530Z,1520664360.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-03-10T06:46:00.530Z,1520664360.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:46:00.962Z,1520664360.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-03-10T06:46:00.963Z,1520664360.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:46:01.325Z,1520664361.325 [BPC1](FAULT): Failed to initialize
2018-03-10T06:46:01.325Z,1520664361.325 [BPC1] Communications Fault, FailCount= 2
2018-03-10T06:46:01.325Z,1520664361.325 [BPC1](ERROR): Communications Fault
2018-03-10T06:46:01.332Z,1520664361.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-03-10T06:46:01.333Z,1520664361.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:46:01.415Z,1520664361.415 [CBIT](ERROR): Communications Fault in component: BPC1
2018-03-10T06:46:01.739Z,1520664361.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-03-10T06:46:01.740Z,1520664361.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:46:02.134Z,1520664362.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-03-10T06:46:02.135Z,1520664362.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:46:02.534Z,1520664362.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-03-10T06:46:02.534Z,1520664362.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:46:02.617Z,1520664362.617 [CBIT](INFO): Clearing failed state for component BPC1
2018-03-10T06:46:02.617Z,1520664362.617 [BPC1] No Fault, FailCount= 2
2018-03-10T06:46:02.985Z,1520664362.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-03-10T06:46:02.986Z,1520664362.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:46:03.336Z,1520664363.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-03-10T06:46:03.337Z,1520664363.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:46:03.727Z,1520664363.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-03-10T06:46:03.728Z,1520664363.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:46:04.138Z,1520664364.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-03-10T06:46:04.139Z,1520664364.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:46:04.538Z,1520664364.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-03-10T06:46:04.539Z,1520664364.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:46:04.938Z,1520664364.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-03-10T06:46:04.939Z,1520664364.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:46:05.334Z,1520664365.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-03-10T06:46:05.335Z,1520664365.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:46:05.734Z,1520664365.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-03-10T06:46:05.736Z,1520664365.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:46:06.130Z,1520664366.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-03-10T06:46:06.132Z,1520664366.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:46:06.533Z,1520664366.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-03-10T06:46:06.533Z,1520664366.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:46:06.938Z,1520664366.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-03-10T06:46:06.939Z,1520664366.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:46:07.338Z,1520664367.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-03-10T06:46:07.339Z,1520664367.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:46:07.738Z,1520664367.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-03-10T06:46:07.739Z,1520664367.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:46:08.134Z,1520664368.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-03-10T06:46:08.135Z,1520664368.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:46:08.532Z,1520664368.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-03-10T06:46:08.533Z,1520664368.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:46:08.933Z,1520664368.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-03-10T06:46:08.934Z,1520664368.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:46:09.335Z,1520664369.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-03-10T06:46:09.336Z,1520664369.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:46:09.726Z,1520664369.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-03-10T06:46:09.727Z,1520664369.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:46:10.142Z,1520664370.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-03-10T06:46:10.143Z,1520664370.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:46:13.265Z,1520664373.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.9 s old, using for 20.0 s.
2018-03-10T06:46:13.266Z,1520664373.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:46:13.433Z,1520664373.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:46:13.823Z,1520664373.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:46:14.232Z,1520664374.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:46:14.632Z,1520664374.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:46:15.032Z,1520664375.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:46:15.432Z,1520664375.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:46:15.834Z,1520664375.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:46:16.225Z,1520664376.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:46:16.629Z,1520664376.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:46:17.023Z,1520664377.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:46:17.424Z,1520664377.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:46:17.825Z,1520664377.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:46:18.230Z,1520664378.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:46:18.635Z,1520664378.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:46:19.041Z,1520664379.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:46:19.438Z,1520664379.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:46:19.841Z,1520664379.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:46:20.226Z,1520664380.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:46:20.610Z,1520664380.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:46:21.033Z,1520664381.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:46:21.421Z,1520664381.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:46:21.820Z,1520664381.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:46:22.211Z,1520664382.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:46:22.613Z,1520664382.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:46:23.006Z,1520664383.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:46:23.459Z,1520664383.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:46:23.825Z,1520664383.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:46:24.240Z,1520664384.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:46:24.635Z,1520664384.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:46:25.041Z,1520664385.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:46:25.433Z,1520664385.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:46:25.831Z,1520664385.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:46:26.209Z,1520664386.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:46:26.605Z,1520664386.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:46:27.030Z,1520664387.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:46:27.440Z,1520664387.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:46:27.838Z,1520664387.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:46:28.236Z,1520664388.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:46:28.613Z,1520664388.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:46:29.005Z,1520664389.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:46:29.406Z,1520664389.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:46:29.838Z,1520664389.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:46:30.231Z,1520664390.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:46:30.640Z,1520664390.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:46:31.036Z,1520664391.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:46:31.405Z,1520664391.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:46:31.814Z,1520664391.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:46:32.217Z,1520664392.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:46:32.610Z,1520664392.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:46:33.021Z,1520664393.021 [BPC1](FAULT): Failed to initialize
2018-03-10T06:46:33.021Z,1520664393.021 [BPC1] Communications Fault, FailCount= 3
2018-03-10T06:46:33.021Z,1520664393.021 [BPC1](ERROR): Communications Fault
2018-03-10T06:46:33.052Z,1520664393.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:46:33.131Z,1520664393.131 [CBIT](ERROR): Communications Fault in component: BPC1
2018-03-10T06:46:33.441Z,1520664393.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:46:33.845Z,1520664393.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:46:34.209Z,1520664394.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:46:34.291Z,1520664394.291 [CBIT](INFO): Clearing failed state for component BPC1
2018-03-10T06:46:34.291Z,1520664394.291 [BPC1] No Fault, FailCount= 3
2018-03-10T06:46:34.678Z,1520664394.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:46:35.019Z,1520664395.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:46:35.440Z,1520664395.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:46:35.813Z,1520664395.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:46:36.220Z,1520664396.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:46:36.641Z,1520664396.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:46:37.042Z,1520664397.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:46:37.417Z,1520664397.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:46:37.818Z,1520664397.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:46:38.218Z,1520664398.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:46:38.644Z,1520664398.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:46:39.040Z,1520664399.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:46:39.438Z,1520664399.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:46:39.845Z,1520664399.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:46:40.235Z,1520664400.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:46:40.646Z,1520664400.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:46:41.020Z,1520664401.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:46:41.441Z,1520664401.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:46:41.841Z,1520664401.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:46:42.215Z,1520664402.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:46:42.640Z,1520664402.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:46:43.041Z,1520664403.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:46:43.444Z,1520664403.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:46:43.832Z,1520664403.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:46:44.221Z,1520664404.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:46:44.619Z,1520664404.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:46:45.042Z,1520664405.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:46:45.441Z,1520664405.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:46:45.840Z,1520664405.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:46:46.218Z,1520664406.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:46:46.636Z,1520664406.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:46:47.017Z,1520664407.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:46:47.419Z,1520664407.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:46:47.818Z,1520664407.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:46:48.244Z,1520664408.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:46:48.622Z,1520664408.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:46:49.041Z,1520664409.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:46:49.415Z,1520664409.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:46:49.820Z,1520664409.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:46:50.215Z,1520664410.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:46:50.622Z,1520664410.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:46:51.039Z,1520664411.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:46:51.441Z,1520664411.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:46:51.815Z,1520664411.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:46:52.226Z,1520664412.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:46:52.618Z,1520664412.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:46:53.045Z,1520664413.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:46:53.414Z,1520664413.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:46:53.819Z,1520664413.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:46:54.222Z,1520664414.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:46:54.644Z,1520664414.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:46:55.022Z,1520664415.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:46:55.420Z,1520664415.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:46:55.820Z,1520664415.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:46:56.247Z,1520664416.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:46:56.624Z,1520664416.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:46:57.027Z,1520664417.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:46:57.425Z,1520664417.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:46:57.846Z,1520664417.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:46:58.224Z,1520664418.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:46:58.620Z,1520664418.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:46:59.021Z,1520664419.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:46:59.448Z,1520664419.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:46:59.820Z,1520664419.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:47:00.226Z,1520664420.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:47:00.629Z,1520664420.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:47:01.047Z,1520664421.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:47:01.409Z,1520664421.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:47:01.819Z,1520664421.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:47:02.221Z,1520664422.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:47:02.630Z,1520664422.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:47:03.025Z,1520664423.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:47:03.427Z,1520664423.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:47:03.823Z,1520664423.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:47:04.248Z,1520664424.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:47:04.616Z,1520664424.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:47:05.003Z,1520664425.003 [BPC1](FAULT): Failed to initialize
2018-03-10T06:47:05.004Z,1520664425.004 [BPC1] Communications Fault, FailCount= 4
2018-03-10T06:47:05.004Z,1520664425.004 [BPC1](ERROR): Communications Fault
2018-03-10T06:47:05.020Z,1520664425.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:47:05.095Z,1520664425.095 [CBIT](ERROR): Communications Fault in component: BPC1
2018-03-10T06:47:05.421Z,1520664425.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:47:05.850Z,1520664425.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:47:06.228Z,1520664426.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:47:06.323Z,1520664426.323 [CBIT](INFO): Clearing failed state for component BPC1
2018-03-10T06:47:06.323Z,1520664426.323 [BPC1] No Fault, FailCount= 4
2018-03-10T06:47:06.697Z,1520664426.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:47:07.052Z,1520664427.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:47:07.430Z,1520664427.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:47:07.824Z,1520664427.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:47:08.221Z,1520664428.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:47:08.619Z,1520664428.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:47:09.049Z,1520664429.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:47:09.432Z,1520664429.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:47:09.827Z,1520664429.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:47:10.220Z,1520664430.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:47:13.320Z,1520664433.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:47:13.323Z,1520664433.323 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-03-10T06:42:13.1Z
2018-03-10T06:47:13.323Z,1520664433.323 [Default:CheckIn:Read_GPS] Stopped
2018-03-10T06:47:13.324Z,1520664433.324 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-03-10T06:47:13.463Z,1520664433.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:47:13.956Z,1520664433.956 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20180310T051512/Courier0036.lzma
2018-03-10T06:47:14.021Z,1520664434.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:47:14.267Z,1520664434.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:47:14.615Z,1520664434.615 [DataOverHttps](INFO): Moved sent file to Logs/20180310T051512/Courier0036.lzma.bak
2018-03-10T06:47:14.615Z,1520664434.615 [DataOverHttps](INFO): SBD MOMSN=8002424
2018-03-10T06:47:14.683Z,1520664434.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:47:15.312Z,1520664435.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:47:15.469Z,1520664435.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:47:15.867Z,1520664435.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:47:19.010Z,1520664439.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:47:19.161Z,1520664439.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:47:19.559Z,1520664439.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:47:19.938Z,1520664439.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:47:20.357Z,1520664440.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:47:20.761Z,1520664440.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:47:21.167Z,1520664441.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:47:24.264Z,1520664444.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:47:24.433Z,1520664444.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:47:24.772Z,1520664444.772 [DataOverHttps](INFO): Sending 175 bytes from file Logs/20180310T051512/Express0037.lzma
2018-03-10T06:47:24.858Z,1520664444.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:47:25.206Z,1520664445.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:47:25.561Z,1520664445.561 [DataOverHttps](INFO): Moved sent file to Logs/20180310T051512/Express0037.lzma.bak
2018-03-10T06:47:25.561Z,1520664445.561 [DataOverHttps](INFO): SBD MOMSN=8002426
2018-03-10T06:47:25.626Z,1520664445.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:47:26.278Z,1520664446.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:47:26.281Z,1520664446.281 [Default:CheckIn:Read_Iridium] Stopped
2018-03-10T06:47:26.281Z,1520664446.281 [Default:CheckIn:C.Wait] Running Loop=1
2018-03-10T06:47:26.281Z,1520664446.281 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-03-10T06:47:26.461Z,1520664446.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:47:26.838Z,1520664446.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:47:29.929Z,1520664449.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:47:30.121Z,1520664450.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:47:30.504Z,1520664450.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:47:30.903Z,1520664450.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:47:31.304Z,1520664451.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:47:31.677Z,1520664451.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:47:32.078Z,1520664452.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:47:32.476Z,1520664452.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:47:32.905Z,1520664452.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:47:33.301Z,1520664453.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:47:33.682Z,1520664453.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:47:34.077Z,1520664454.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:47:34.484Z,1520664454.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:47:34.904Z,1520664454.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:47:35.304Z,1520664455.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:47:35.708Z,1520664455.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:47:36.078Z,1520664456.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:47:36.477Z,1520664456.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:47:36.947Z,1520664456.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:47:37.282Z,1520664457.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:47:37.682Z,1520664457.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:47:38.076Z,1520664458.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:47:38.477Z,1520664458.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:47:38.886Z,1520664458.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:47:39.288Z,1520664459.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:47:39.697Z,1520664459.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:47:40.077Z,1520664460.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:47:40.473Z,1520664460.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:47:40.889Z,1520664460.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:47:41.309Z,1520664461.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:47:41.697Z,1520664461.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:47:42.080Z,1520664462.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:47:42.483Z,1520664462.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:47:42.898Z,1520664462.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:47:43.313Z,1520664463.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:47:43.691Z,1520664463.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:47:44.089Z,1520664464.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:47:44.487Z,1520664464.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:47:44.950Z,1520664464.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:47:45.307Z,1520664465.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:47:45.696Z,1520664465.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:47:46.098Z,1520664466.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:47:46.497Z,1520664466.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:47:46.923Z,1520664466.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:47:47.328Z,1520664467.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:47:47.694Z,1520664467.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:47:48.093Z,1520664468.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:47:48.492Z,1520664468.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:47:48.913Z,1520664468.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:47:49.302Z,1520664469.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:47:49.701Z,1520664469.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:47:50.075Z,1520664470.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:47:50.477Z,1520664470.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:47:50.901Z,1520664470.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:47:51.307Z,1520664471.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:47:51.703Z,1520664471.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:47:52.079Z,1520664472.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:47:52.478Z,1520664472.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:47:52.904Z,1520664472.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:47:53.283Z,1520664473.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:47:53.683Z,1520664473.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:47:54.078Z,1520664474.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:47:54.481Z,1520664474.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:47:54.883Z,1520664474.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:47:55.303Z,1520664475.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:47:55.705Z,1520664475.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:47:56.107Z,1520664476.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:47:56.481Z,1520664476.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:47:56.883Z,1520664476.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:47:57.307Z,1520664477.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:47:57.682Z,1520664477.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:47:58.078Z,1520664478.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:47:58.483Z,1520664478.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:47:58.907Z,1520664478.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:47:59.282Z,1520664479.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:47:59.683Z,1520664479.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:48:00.088Z,1520664480.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:48:00.485Z,1520664480.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:48:00.883Z,1520664480.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:48:01.282Z,1520664481.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:48:01.683Z,1520664481.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:48:02.081Z,1520664482.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:48:02.477Z,1520664482.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:48:02.883Z,1520664482.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:48:03.283Z,1520664483.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:48:03.683Z,1520664483.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:48:04.079Z,1520664484.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:48:04.485Z,1520664484.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:48:04.882Z,1520664484.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:48:05.282Z,1520664485.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:48:05.683Z,1520664485.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:48:06.085Z,1520664486.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:48:06.485Z,1520664486.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:48:06.883Z,1520664486.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:48:07.287Z,1520664487.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:48:07.682Z,1520664487.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:48:08.085Z,1520664488.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:48:08.514Z,1520664488.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:48:08.885Z,1520664488.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:48:09.293Z,1520664489.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:48:09.708Z,1520664489.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:48:10.084Z,1520664490.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:48:10.500Z,1520664490.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:48:10.889Z,1520664490.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:48:11.289Z,1520664491.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:48:11.691Z,1520664491.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:48:12.081Z,1520664492.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:48:12.477Z,1520664492.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:48:12.890Z,1520664492.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:48:13.286Z,1520664493.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:48:13.689Z,1520664493.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:48:14.085Z,1520664494.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:48:14.485Z,1520664494.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:48:14.891Z,1520664494.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:48:15.297Z,1520664495.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:48:15.690Z,1520664495.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:48:16.124Z,1520664496.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:48:16.470Z,1520664496.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:48:16.965Z,1520664496.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:48:17.282Z,1520664497.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:48:17.683Z,1520664497.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:48:18.073Z,1520664498.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:48:18.470Z,1520664498.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:48:18.893Z,1520664498.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:48:19.295Z,1520664499.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:48:19.690Z,1520664499.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:48:20.082Z,1520664500.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:48:20.487Z,1520664500.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:48:20.905Z,1520664500.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:48:21.292Z,1520664501.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:48:21.693Z,1520664501.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:48:22.101Z,1520664502.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:48:22.493Z,1520664502.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:48:22.892Z,1520664502.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:48:23.292Z,1520664503.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:48:23.692Z,1520664503.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:48:24.084Z,1520664504.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:48:24.489Z,1520664504.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:48:24.893Z,1520664504.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:48:25.293Z,1520664505.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:48:25.692Z,1520664505.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:48:26.085Z,1520664506.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:48:26.489Z,1520664506.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:48:26.901Z,1520664506.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:48:30.045Z,1520664510.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:48:30.223Z,1520664510.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:48:30.585Z,1520664510.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:48:30.986Z,1520664510.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:48:31.393Z,1520664511.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:48:31.789Z,1520664511.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:48:32.197Z,1520664512.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:48:32.603Z,1520664512.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:48:33.042Z,1520664513.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:48:33.406Z,1520664513.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:48:33.770Z,1520664513.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:48:34.191Z,1520664514.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:48:34.590Z,1520664514.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:48:35.009Z,1520664515.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:48:35.401Z,1520664515.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:48:35.799Z,1520664515.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:48:36.193Z,1520664516.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:48:36.573Z,1520664516.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:48:37.002Z,1520664517.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:48:37.374Z,1520664517.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:48:37.774Z,1520664517.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:48:38.205Z,1520664518.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:48:38.602Z,1520664518.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:48:39.002Z,1520664519.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:48:39.377Z,1520664519.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:48:39.781Z,1520664519.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:48:40.178Z,1520664520.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:48:40.585Z,1520664520.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:48:41.010Z,1520664521.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:48:41.413Z,1520664521.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:48:41.788Z,1520664521.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:48:42.181Z,1520664522.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:48:42.582Z,1520664522.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:48:42.985Z,1520664522.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:48:43.381Z,1520664523.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:48:43.788Z,1520664523.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:48:44.218Z,1520664524.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:48:44.586Z,1520664524.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:48:44.989Z,1520664524.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:48:45.383Z,1520664525.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:48:45.785Z,1520664525.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:48:46.189Z,1520664526.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:48:46.582Z,1520664526.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:48:46.987Z,1520664526.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:48:47.386Z,1520664527.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:48:47.791Z,1520664527.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:48:48.178Z,1520664528.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:48:48.581Z,1520664528.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:48:48.989Z,1520664528.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:48:49.378Z,1520664529.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:48:49.782Z,1520664529.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:48:50.197Z,1520664530.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:48:50.597Z,1520664530.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:48:50.989Z,1520664530.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:48:51.382Z,1520664531.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:48:51.789Z,1520664531.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:48:52.189Z,1520664532.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:48:52.583Z,1520664532.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:48:52.989Z,1520664532.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:48:53.389Z,1520664533.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:48:53.797Z,1520664533.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:48:54.189Z,1520664534.189 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:48:54.189Z,1520664534.189 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 31
2018-03-10T06:48:54.189Z,1520664534.189 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-03-10T06:48:54.191Z,1520664534.191 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:48:54.191Z,1520664534.191 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 31
2018-03-10T06:48:54.191Z,1520664534.191 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-03-10T06:48:54.193Z,1520664534.193 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:48:54.193Z,1520664534.193 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 31
2018-03-10T06:48:54.193Z,1520664534.193 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-10T06:48:54.287Z,1520664534.287 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-03-10T06:48:54.287Z,1520664534.287 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-03-10T06:48:54.288Z,1520664534.288 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-10T06:48:54.660Z,1520664534.660 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-03-10T06:48:54.660Z,1520664534.660 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 31
2018-03-10T06:48:54.661Z,1520664534.661 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-03-10T06:48:54.661Z,1520664534.661 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 31
2018-03-10T06:48:54.661Z,1520664534.661 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-10T06:48:54.661Z,1520664534.661 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 31
2018-03-10T06:48:55.024Z,1520664535.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-03-10T06:48:55.025Z,1520664535.025 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-03-10T06:48:55.025Z,1520664535.025 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-03-10T06:48:55.027Z,1520664535.027 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-03-10T06:48:55.028Z,1520664535.028 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-03-10T06:48:55.028Z,1520664535.028 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-03-10T06:48:55.029Z,1520664535.029 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-10T06:48:55.029Z,1520664535.029 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-10T06:48:55.029Z,1520664535.029 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-10T06:48:55.391Z,1520664535.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-03-10T06:48:55.392Z,1520664535.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:48:55.787Z,1520664535.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-03-10T06:48:55.788Z,1520664535.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:48:56.195Z,1520664536.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-03-10T06:48:56.196Z,1520664536.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:48:56.595Z,1520664536.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-03-10T06:48:56.596Z,1520664536.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:48:56.993Z,1520664536.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-03-10T06:48:56.994Z,1520664536.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:48:57.386Z,1520664537.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-03-10T06:48:57.387Z,1520664537.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:48:57.792Z,1520664537.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-03-10T06:48:57.793Z,1520664537.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:48:58.191Z,1520664538.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-03-10T06:48:58.192Z,1520664538.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:48:58.596Z,1520664538.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-03-10T06:48:58.597Z,1520664538.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:48:58.994Z,1520664538.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-03-10T06:48:58.995Z,1520664538.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:48:59.397Z,1520664539.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-03-10T06:48:59.398Z,1520664539.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:48:59.795Z,1520664539.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-03-10T06:48:59.796Z,1520664539.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:49:00.190Z,1520664540.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-03-10T06:49:00.191Z,1520664540.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:49:00.589Z,1520664540.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-03-10T06:49:00.590Z,1520664540.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:49:00.973Z,1520664540.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-03-10T06:49:00.974Z,1520664540.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:49:01.397Z,1520664541.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-03-10T06:49:01.398Z,1520664541.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:49:01.776Z,1520664541.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-03-10T06:49:01.777Z,1520664541.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:49:02.211Z,1520664542.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-03-10T06:49:02.212Z,1520664542.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:49:02.602Z,1520664542.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-03-10T06:49:02.603Z,1520664542.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:49:02.998Z,1520664542.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-03-10T06:49:02.999Z,1520664542.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:49:03.377Z,1520664543.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-03-10T06:49:03.378Z,1520664543.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:49:03.776Z,1520664543.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-03-10T06:49:03.777Z,1520664543.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:49:04.178Z,1520664544.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-03-10T06:49:04.179Z,1520664544.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:49:04.577Z,1520664544.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-03-10T06:49:04.578Z,1520664544.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:49:05.005Z,1520664545.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-03-10T06:49:05.006Z,1520664545.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:49:05.413Z,1520664545.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-03-10T06:49:05.414Z,1520664545.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:49:05.786Z,1520664545.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-03-10T06:49:05.787Z,1520664545.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:49:06.188Z,1520664546.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-03-10T06:49:06.189Z,1520664546.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:49:06.608Z,1520664546.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-03-10T06:49:06.610Z,1520664546.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:49:06.982Z,1520664546.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-03-10T06:49:06.983Z,1520664546.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:49:07.384Z,1520664547.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-03-10T06:49:07.385Z,1520664547.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:49:07.781Z,1520664547.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-03-10T06:49:07.782Z,1520664547.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:49:08.191Z,1520664548.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-03-10T06:49:08.192Z,1520664548.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:49:08.596Z,1520664548.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-03-10T06:49:08.597Z,1520664548.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:49:08.990Z,1520664548.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-03-10T06:49:08.991Z,1520664548.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:49:09.382Z,1520664549.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-03-10T06:49:09.383Z,1520664549.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:49:09.790Z,1520664549.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-03-10T06:49:09.791Z,1520664549.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:49:10.205Z,1520664550.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-03-10T06:49:10.206Z,1520664550.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:49:10.580Z,1520664550.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-03-10T06:49:10.581Z,1520664550.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:49:10.994Z,1520664550.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-03-10T06:49:10.996Z,1520664550.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:49:11.394Z,1520664551.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-03-10T06:49:11.394Z,1520664551.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:49:11.795Z,1520664551.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-03-10T06:49:11.796Z,1520664551.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:49:12.181Z,1520664552.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-03-10T06:49:12.182Z,1520664552.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:49:12.588Z,1520664552.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2018-03-10T06:49:12.589Z,1520664552.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:49:12.988Z,1520664552.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2018-03-10T06:49:12.989Z,1520664552.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:49:13.380Z,1520664553.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2018-03-10T06:49:13.381Z,1520664553.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:49:13.781Z,1520664553.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2018-03-10T06:49:13.782Z,1520664553.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:49:14.194Z,1520664554.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:49:14.599Z,1520664554.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:49:14.998Z,1520664554.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:49:15.389Z,1520664555.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:49:15.787Z,1520664555.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:49:16.187Z,1520664556.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:49:16.587Z,1520664556.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:49:16.999Z,1520664556.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:49:17.401Z,1520664557.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:49:17.836Z,1520664557.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:49:18.185Z,1520664558.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:49:18.593Z,1520664558.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:49:18.993Z,1520664558.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:49:19.388Z,1520664559.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:49:19.789Z,1520664559.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:49:20.196Z,1520664560.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:49:20.598Z,1520664560.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:49:21.001Z,1520664561.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:49:21.393Z,1520664561.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:49:21.773Z,1520664561.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:49:22.193Z,1520664562.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:49:22.574Z,1520664562.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:49:23.006Z,1520664563.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:49:23.402Z,1520664563.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:49:23.804Z,1520664563.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:49:24.173Z,1520664564.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:49:24.573Z,1520664564.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:49:25.007Z,1520664565.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:49:25.371Z,1520664565.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:49:25.773Z,1520664565.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:49:26.209Z,1520664566.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:49:26.599Z,1520664566.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:49:27.002Z,1520664567.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:49:30.116Z,1520664570.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:49:30.277Z,1520664570.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:49:30.693Z,1520664570.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:49:31.071Z,1520664571.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:49:31.477Z,1520664571.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:49:31.865Z,1520664571.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:49:32.264Z,1520664572.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:49:32.669Z,1520664572.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:49:33.066Z,1520664573.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:49:33.461Z,1520664573.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:49:33.861Z,1520664573.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:49:34.252Z,1520664574.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:49:34.659Z,1520664574.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:49:35.056Z,1520664575.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:49:35.455Z,1520664575.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:49:35.868Z,1520664575.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:49:36.262Z,1520664576.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:49:36.664Z,1520664576.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:49:37.058Z,1520664577.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:49:37.455Z,1520664577.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:49:37.865Z,1520664577.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:49:38.272Z,1520664578.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:49:38.667Z,1520664578.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:49:39.053Z,1520664579.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:49:39.461Z,1520664579.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:49:39.864Z,1520664579.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:49:40.266Z,1520664580.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:49:40.668Z,1520664580.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:49:41.059Z,1520664581.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:49:41.460Z,1520664581.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:49:41.877Z,1520664581.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:49:42.265Z,1520664582.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:49:42.665Z,1520664582.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:49:43.060Z,1520664583.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:49:43.463Z,1520664583.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:49:43.889Z,1520664583.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:49:44.266Z,1520664584.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:49:44.663Z,1520664584.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:49:45.066Z,1520664585.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:49:45.469Z,1520664585.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:49:45.864Z,1520664585.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:49:46.264Z,1520664586.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:49:46.663Z,1520664586.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:49:47.045Z,1520664587.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:49:47.469Z,1520664587.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:49:47.916Z,1520664587.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:49:48.292Z,1520664588.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:49:48.685Z,1520664588.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:49:49.075Z,1520664589.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:49:49.479Z,1520664589.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:49:49.892Z,1520664589.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:49:50.271Z,1520664590.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:49:50.677Z,1520664590.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:49:51.080Z,1520664591.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:49:51.476Z,1520664591.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:49:51.890Z,1520664591.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:49:52.277Z,1520664592.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:49:52.684Z,1520664592.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:49:53.089Z,1520664593.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:49:53.480Z,1520664593.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:49:53.859Z,1520664593.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:49:54.312Z,1520664594.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:49:54.695Z,1520664594.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:49:55.088Z,1520664595.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:49:55.487Z,1520664595.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:49:55.890Z,1520664595.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:49:56.267Z,1520664596.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:49:56.753Z,1520664596.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:49:57.066Z,1520664597.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:49:57.514Z,1520664597.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:49:57.873Z,1520664597.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:49:58.267Z,1520664598.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:49:58.677Z,1520664598.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:49:59.069Z,1520664599.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:49:59.473Z,1520664599.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:49:59.877Z,1520664599.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:50:00.266Z,1520664600.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:50:00.677Z,1520664600.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:50:01.059Z,1520664601.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:50:01.454Z,1520664601.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:50:01.873Z,1520664601.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:50:02.269Z,1520664602.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:50:02.664Z,1520664602.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:50:03.062Z,1520664603.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:50:03.461Z,1520664603.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:50:03.866Z,1520664603.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:50:04.273Z,1520664604.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:50:04.664Z,1520664604.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:50:05.056Z,1520664605.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:50:05.454Z,1520664605.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:50:05.876Z,1520664605.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:50:06.273Z,1520664606.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:50:06.685Z,1520664606.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:50:07.061Z,1520664607.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:50:07.508Z,1520664607.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:50:07.863Z,1520664607.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:50:08.268Z,1520664608.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:50:08.667Z,1520664608.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:50:09.057Z,1520664609.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:50:09.458Z,1520664609.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:50:09.867Z,1520664609.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:50:10.317Z,1520664610.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:50:10.668Z,1520664610.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:50:11.059Z,1520664611.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:50:11.469Z,1520664611.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:50:11.889Z,1520664611.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:50:12.266Z,1520664612.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:50:12.661Z,1520664612.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:50:13.065Z,1520664613.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:50:13.464Z,1520664613.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:50:13.865Z,1520664613.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:50:14.270Z,1520664614.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:50:14.673Z,1520664614.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:50:15.064Z,1520664615.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:50:15.463Z,1520664615.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:50:15.869Z,1520664615.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:50:16.267Z,1520664616.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:50:16.666Z,1520664616.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:50:17.061Z,1520664617.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:50:17.473Z,1520664617.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:50:17.893Z,1520664617.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:50:18.265Z,1520664618.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:50:18.665Z,1520664618.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:50:19.069Z,1520664619.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:50:19.472Z,1520664619.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:50:19.877Z,1520664619.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:50:20.273Z,1520664620.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:50:20.670Z,1520664620.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:50:21.047Z,1520664621.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:50:21.446Z,1520664621.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:50:21.869Z,1520664621.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:50:22.268Z,1520664622.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:50:22.671Z,1520664622.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:50:23.044Z,1520664623.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:50:23.446Z,1520664623.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:50:23.876Z,1520664623.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:50:24.269Z,1520664624.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:50:24.667Z,1520664624.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:50:25.067Z,1520664625.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:50:25.446Z,1520664625.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:50:25.874Z,1520664625.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:50:26.274Z,1520664626.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:50:26.671Z,1520664626.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:50:27.049Z,1520664627.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:50:30.183Z,1520664630.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:50:30.341Z,1520664630.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:50:30.742Z,1520664630.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:50:31.143Z,1520664631.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:50:31.527Z,1520664631.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:50:31.927Z,1520664631.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:50:32.333Z,1520664632.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:50:32.733Z,1520664632.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:50:33.139Z,1520664633.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:50:33.543Z,1520664633.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:50:33.940Z,1520664633.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:50:34.337Z,1520664634.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:50:34.733Z,1520664634.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:50:35.133Z,1520664635.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:50:35.537Z,1520664635.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:50:35.954Z,1520664635.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:50:36.349Z,1520664636.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:50:36.761Z,1520664636.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:50:37.134Z,1520664637.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:50:37.538Z,1520664637.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:50:37.917Z,1520664637.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:50:38.318Z,1520664638.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:50:38.717Z,1520664638.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:50:39.148Z,1520664639.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:50:39.543Z,1520664639.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:50:39.940Z,1520664639.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:50:40.318Z,1520664640.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:50:40.718Z,1520664640.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:50:41.141Z,1520664641.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:50:41.540Z,1520664641.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:50:41.947Z,1520664641.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:50:42.345Z,1520664642.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:50:42.746Z,1520664642.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:50:43.121Z,1520664643.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:50:43.525Z,1520664643.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:50:43.925Z,1520664643.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:50:44.325Z,1520664644.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:50:44.718Z,1520664644.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:50:45.143Z,1520664645.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:50:45.545Z,1520664645.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:50:45.947Z,1520664645.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:50:46.319Z,1520664646.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:50:46.721Z,1520664646.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:50:47.118Z,1520664647.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:50:47.525Z,1520664647.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:50:47.949Z,1520664647.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:50:48.346Z,1520664648.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:50:48.749Z,1520664648.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:50:49.145Z,1520664649.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:50:49.525Z,1520664649.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:50:49.925Z,1520664649.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:50:50.330Z,1520664650.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:50:50.721Z,1520664650.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:50:51.149Z,1520664651.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:50:51.553Z,1520664651.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:50:51.950Z,1520664651.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:50:52.321Z,1520664652.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:50:52.728Z,1520664652.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:50:53.151Z,1520664653.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:50:53.521Z,1520664653.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:50:53.951Z,1520664653.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:50:54.338Z,1520664654.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:50:54.731Z,1520664654.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:50:55.129Z,1520664655.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:50:55.527Z,1520664655.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:50:55.927Z,1520664655.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:50:56.327Z,1520664656.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:50:56.727Z,1520664656.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:50:57.131Z,1520664657.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:50:57.531Z,1520664657.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:50:57.932Z,1520664657.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:50:58.325Z,1520664658.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:50:58.729Z,1520664658.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:50:59.133Z,1520664659.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:50:59.525Z,1520664659.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:50:59.932Z,1520664659.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:51:00.331Z,1520664660.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:51:00.731Z,1520664660.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:51:01.136Z,1520664661.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:51:01.562Z,1520664661.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:51:01.925Z,1520664661.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:51:02.328Z,1520664662.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:51:02.729Z,1520664662.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:51:03.133Z,1520664663.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:51:03.535Z,1520664663.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:51:03.933Z,1520664663.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:51:04.331Z,1520664664.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:51:04.749Z,1520664664.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:51:05.126Z,1520664665.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:51:05.526Z,1520664665.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:51:05.938Z,1520664665.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:51:06.337Z,1520664666.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:51:06.745Z,1520664666.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:51:07.126Z,1520664667.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:51:07.527Z,1520664667.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:51:07.925Z,1520664667.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:51:08.328Z,1520664668.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:51:08.731Z,1520664668.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:51:09.139Z,1520664669.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:51:09.543Z,1520664669.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:51:09.939Z,1520664669.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:51:10.330Z,1520664670.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:51:10.733Z,1520664670.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:51:11.133Z,1520664671.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:51:11.531Z,1520664671.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:51:11.949Z,1520664671.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:51:12.349Z,1520664672.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:51:12.738Z,1520664672.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:51:13.132Z,1520664673.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:51:13.527Z,1520664673.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:51:13.941Z,1520664673.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:51:14.349Z,1520664674.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:51:14.730Z,1520664674.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:51:15.139Z,1520664675.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:51:15.539Z,1520664675.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:51:15.945Z,1520664675.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:51:16.353Z,1520664676.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:51:16.734Z,1520664676.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:51:17.138Z,1520664677.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:51:17.518Z,1520664677.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:51:17.942Z,1520664677.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:51:18.342Z,1520664678.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:51:18.741Z,1520664678.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:51:19.119Z,1520664679.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:51:19.521Z,1520664679.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:51:19.925Z,1520664679.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:51:20.326Z,1520664680.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:51:20.717Z,1520664680.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:51:21.150Z,1520664681.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:51:21.553Z,1520664681.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:51:21.947Z,1520664681.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:51:22.322Z,1520664682.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:51:22.729Z,1520664682.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:51:23.122Z,1520664683.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:51:23.522Z,1520664683.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:51:23.957Z,1520664683.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:51:24.344Z,1520664684.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:51:24.753Z,1520664684.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:51:25.122Z,1520664685.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:51:25.526Z,1520664685.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:51:25.929Z,1520664685.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:51:26.322Z,1520664686.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:51:26.729Z,1520664686.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:51:27.165Z,1520664687.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:51:30.257Z,1520664690.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:51:30.447Z,1520664690.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:51:30.817Z,1520664690.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:51:31.217Z,1520664691.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:51:31.608Z,1520664691.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:51:32.021Z,1520664692.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:51:32.416Z,1520664692.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:51:32.820Z,1520664692.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:51:33.206Z,1520664693.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:51:33.607Z,1520664693.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:51:34.007Z,1520664694.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:51:34.408Z,1520664694.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:51:34.809Z,1520664694.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:51:35.221Z,1520664695.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:51:35.616Z,1520664695.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:51:36.029Z,1520664696.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:51:36.429Z,1520664696.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:51:36.812Z,1520664696.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:51:37.213Z,1520664697.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:51:37.617Z,1520664697.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:51:38.022Z,1520664698.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:51:38.416Z,1520664698.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:51:38.818Z,1520664698.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:51:39.205Z,1520664699.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:51:39.635Z,1520664699.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:51:40.028Z,1520664700.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:51:40.398Z,1520664700.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:51:40.798Z,1520664700.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:51:41.203Z,1520664701.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:51:41.627Z,1520664701.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:51:42.030Z,1520664702.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:51:42.398Z,1520664702.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:51:42.801Z,1520664702.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:51:43.202Z,1520664703.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:51:43.599Z,1520664703.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:51:44.008Z,1520664704.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:51:44.401Z,1520664704.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:51:44.833Z,1520664704.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:51:45.203Z,1520664705.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:51:45.650Z,1520664705.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:51:46.045Z,1520664706.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:51:46.440Z,1520664706.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:51:46.806Z,1520664706.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:51:47.221Z,1520664707.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:51:47.626Z,1520664707.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:51:48.022Z,1520664708.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:51:48.403Z,1520664708.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:51:48.809Z,1520664708.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:51:49.221Z,1520664709.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:51:49.619Z,1520664709.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:51:50.028Z,1520664710.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:51:50.420Z,1520664710.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:51:50.822Z,1520664710.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:51:51.194Z,1520664711.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:51:51.593Z,1520664711.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:51:51.995Z,1520664711.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:51:52.419Z,1520664712.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:51:52.805Z,1520664712.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:51:53.226Z,1520664713.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:51:53.625Z,1520664713.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:51:54.006Z,1520664714.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:51:54.398Z,1520664714.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:51:54.797Z,1520664714.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:51:55.198Z,1520664715.198 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:51:55.198Z,1520664715.198 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 32
2018-03-10T06:51:55.199Z,1520664715.199 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-03-10T06:51:55.200Z,1520664715.200 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:51:55.200Z,1520664715.200 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 32
2018-03-10T06:51:55.201Z,1520664715.201 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-03-10T06:51:55.202Z,1520664715.202 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:51:55.202Z,1520664715.202 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 32
2018-03-10T06:51:55.202Z,1520664715.202 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-10T06:51:55.311Z,1520664715.311 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-03-10T06:51:55.311Z,1520664715.311 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-03-10T06:51:55.311Z,1520664715.311 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-10T06:51:55.687Z,1520664715.687 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-03-10T06:51:55.687Z,1520664715.687 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 32
2018-03-10T06:51:55.688Z,1520664715.688 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-03-10T06:51:55.688Z,1520664715.688 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 32
2018-03-10T06:51:55.688Z,1520664715.688 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-10T06:51:55.688Z,1520664715.688 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 32
2018-03-10T06:51:56.010Z,1520664716.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-03-10T06:51:56.010Z,1520664716.010 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-03-10T06:51:56.011Z,1520664716.011 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-03-10T06:51:56.011Z,1520664716.011 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-03-10T06:51:56.012Z,1520664716.012 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-03-10T06:51:56.012Z,1520664716.012 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-03-10T06:51:56.012Z,1520664716.012 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-10T06:51:56.013Z,1520664716.013 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-10T06:51:56.013Z,1520664716.013 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-10T06:51:56.414Z,1520664716.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-03-10T06:51:56.415Z,1520664716.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:51:56.813Z,1520664716.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-03-10T06:51:56.814Z,1520664716.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:51:57.204Z,1520664717.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-03-10T06:51:57.205Z,1520664717.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:51:57.603Z,1520664717.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-03-10T06:51:57.604Z,1520664717.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:51:58.003Z,1520664718.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-03-10T06:51:58.004Z,1520664718.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:51:58.403Z,1520664718.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-03-10T06:51:58.404Z,1520664718.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:51:58.800Z,1520664718.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-03-10T06:51:58.801Z,1520664718.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:51:59.214Z,1520664719.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-03-10T06:51:59.215Z,1520664719.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:51:59.613Z,1520664719.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-03-10T06:51:59.614Z,1520664719.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:52:00.020Z,1520664720.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-03-10T06:52:00.021Z,1520664720.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:52:00.403Z,1520664720.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-03-10T06:52:00.404Z,1520664720.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:52:00.803Z,1520664720.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-03-10T06:52:00.804Z,1520664720.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:52:01.210Z,1520664721.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-03-10T06:52:01.211Z,1520664721.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:52:01.611Z,1520664721.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-03-10T06:52:01.612Z,1520664721.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:52:02.016Z,1520664722.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-03-10T06:52:02.017Z,1520664722.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:52:02.417Z,1520664722.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-03-10T06:52:02.418Z,1520664722.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:52:02.819Z,1520664722.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-03-10T06:52:02.820Z,1520664722.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:52:03.212Z,1520664723.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-03-10T06:52:03.213Z,1520664723.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:52:03.606Z,1520664723.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-03-10T06:52:03.607Z,1520664723.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:52:04.016Z,1520664724.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-03-10T06:52:04.017Z,1520664724.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:52:04.406Z,1520664724.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-03-10T06:52:04.407Z,1520664724.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:52:04.820Z,1520664724.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-03-10T06:52:04.821Z,1520664724.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:52:05.232Z,1520664725.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-03-10T06:52:05.233Z,1520664725.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:52:05.618Z,1520664725.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-03-10T06:52:05.619Z,1520664725.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:52:06.021Z,1520664726.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-03-10T06:52:06.022Z,1520664726.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:52:06.410Z,1520664726.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-03-10T06:52:06.411Z,1520664726.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:52:06.816Z,1520664726.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-03-10T06:52:06.817Z,1520664726.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:52:07.219Z,1520664727.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-03-10T06:52:07.220Z,1520664727.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:52:07.594Z,1520664727.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-03-10T06:52:07.607Z,1520664727.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:52:08.029Z,1520664728.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-03-10T06:52:08.030Z,1520664728.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:52:08.412Z,1520664728.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-03-10T06:52:08.413Z,1520664728.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:52:08.808Z,1520664728.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-03-10T06:52:08.809Z,1520664728.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:52:09.202Z,1520664729.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-03-10T06:52:09.203Z,1520664729.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:52:09.606Z,1520664729.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-03-10T06:52:09.607Z,1520664729.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:52:10.003Z,1520664730.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-03-10T06:52:10.004Z,1520664730.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:52:10.403Z,1520664730.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-03-10T06:52:10.404Z,1520664730.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:52:10.805Z,1520664730.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-03-10T06:52:10.806Z,1520664730.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:52:11.211Z,1520664731.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-03-10T06:52:11.212Z,1520664731.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:52:11.612Z,1520664731.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-03-10T06:52:11.613Z,1520664731.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:52:12.007Z,1520664732.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-03-10T06:52:12.008Z,1520664732.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:52:12.404Z,1520664732.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-03-10T06:52:12.405Z,1520664732.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:52:12.808Z,1520664732.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-03-10T06:52:12.809Z,1520664732.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:52:13.212Z,1520664733.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-03-10T06:52:13.213Z,1520664733.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:52:13.611Z,1520664733.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2018-03-10T06:52:13.612Z,1520664733.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:52:14.040Z,1520664734.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2018-03-10T06:52:14.041Z,1520664734.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:52:14.408Z,1520664734.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2018-03-10T06:52:14.409Z,1520664734.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:52:14.808Z,1520664734.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2018-03-10T06:52:14.809Z,1520664734.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:52:15.202Z,1520664735.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:52:15.604Z,1520664735.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:52:16.004Z,1520664736.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:52:16.403Z,1520664736.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:52:16.803Z,1520664736.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:52:17.211Z,1520664737.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:52:17.615Z,1520664737.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:52:18.038Z,1520664738.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:52:18.401Z,1520664738.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:52:18.802Z,1520664738.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:52:19.208Z,1520664739.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:52:19.613Z,1520664739.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:52:20.014Z,1520664740.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:52:20.421Z,1520664740.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:52:20.810Z,1520664740.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:52:21.203Z,1520664741.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:52:21.604Z,1520664741.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:52:22.013Z,1520664742.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:52:22.404Z,1520664742.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:52:22.806Z,1520664742.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:52:23.221Z,1520664743.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:52:23.617Z,1520664743.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:52:24.015Z,1520664744.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:52:24.405Z,1520664744.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:52:24.803Z,1520664744.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:52:25.206Z,1520664745.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:52:25.605Z,1520664745.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:52:26.021Z,1520664746.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:52:26.444Z,1520664746.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:52:26.814Z,1520664746.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:52:26.817Z,1520664746.817 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-03-10T06:52:26.817Z,1520664746.817 [Default:CheckIn:C.Wait] Stopped
2018-03-10T06:52:26.817Z,1520664746.817 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-03-10T06:52:26.817Z,1520664746.817 [Default:CheckIn:D] Running Loop=1
2018-03-10T06:52:27.207Z,1520664747.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:52:27.210Z,1520664747.210 [Default:CheckIn:D] Stopped
2018-03-10T06:52:27.210Z,1520664747.210 [Default:CheckIn:E] Running Loop=1
2018-03-10T06:52:30.323Z,1520664750.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:52:30.326Z,1520664750.326 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 93.154818 min 
2018-03-10T06:52:30.355Z,1520664750.355 [Default:CheckIn:E] Stopped
2018-03-10T06:52:30.355Z,1520664750.355 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-03-10T06:52:30.355Z,1520664750.355 [Default:CheckIn] Stopped
2018-03-10T06:52:30.355Z,1520664750.355 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-03-10T06:52:30.355Z,1520664750.355 [Default:CheckIn](INFO): Running loop #10
2018-03-10T06:52:30.355Z,1520664750.355 [Default:CheckIn] Running Loop=10
2018-03-10T06:52:30.355Z,1520664750.355 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-03-10T06:52:30.356Z,1520664750.356 [Default:CheckIn:Read_GPS] Running Loop=1
2018-03-10T06:52:30.513Z,1520664750.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:52:30.907Z,1520664750.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:52:31.303Z,1520664751.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:52:31.703Z,1520664751.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:52:32.103Z,1520664752.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:52:32.497Z,1520664752.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:52:32.901Z,1520664752.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:52:33.294Z,1520664753.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:52:33.696Z,1520664753.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:52:34.099Z,1520664754.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:52:34.503Z,1520664754.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:52:34.903Z,1520664754.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:52:35.295Z,1520664755.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:52:35.695Z,1520664755.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:52:36.095Z,1520664756.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:52:36.494Z,1520664756.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:52:36.903Z,1520664756.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:52:37.305Z,1520664757.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:52:37.703Z,1520664757.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:52:38.099Z,1520664758.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:52:38.508Z,1520664758.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:52:38.909Z,1520664758.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:52:39.304Z,1520664759.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:52:39.704Z,1520664759.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:52:40.113Z,1520664760.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:52:40.509Z,1520664760.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:52:40.906Z,1520664760.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:52:41.304Z,1520664761.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:52:41.681Z,1520664761.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:52:42.102Z,1520664762.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:52:42.504Z,1520664762.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:52:42.925Z,1520664762.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:52:43.315Z,1520664763.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:52:43.694Z,1520664763.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:52:44.085Z,1520664764.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:52:44.486Z,1520664764.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:52:44.882Z,1520664764.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:52:45.286Z,1520664765.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:52:45.686Z,1520664765.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:52:46.114Z,1520664766.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:52:46.514Z,1520664766.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:52:46.915Z,1520664766.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:52:47.285Z,1520664767.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:52:47.685Z,1520664767.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:52:48.086Z,1520664768.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:52:48.486Z,1520664768.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:52:48.913Z,1520664768.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:52:49.316Z,1520664769.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:52:49.710Z,1520664769.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:52:50.085Z,1520664770.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:52:50.487Z,1520664770.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:52:50.893Z,1520664770.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:52:51.316Z,1520664771.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:52:51.687Z,1520664771.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:52:52.115Z,1520664772.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:52:52.515Z,1520664772.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:52:52.917Z,1520664772.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:52:53.286Z,1520664773.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:52:53.686Z,1520664773.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:52:54.086Z,1520664774.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:52:54.491Z,1520664774.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:52:54.917Z,1520664774.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:52:55.326Z,1520664775.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:52:55.723Z,1520664775.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:52:56.089Z,1520664776.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:52:56.501Z,1520664776.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:52:56.893Z,1520664776.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:52:57.291Z,1520664777.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:52:57.697Z,1520664777.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:52:58.095Z,1520664778.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:52:58.496Z,1520664778.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:52:58.895Z,1520664778.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:52:59.292Z,1520664779.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:52:59.690Z,1520664779.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:53:00.092Z,1520664780.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:53:00.492Z,1520664780.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:53:00.894Z,1520664780.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:53:01.301Z,1520664781.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:53:01.694Z,1520664781.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:53:02.092Z,1520664782.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:53:02.490Z,1520664782.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:53:02.919Z,1520664782.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:53:03.322Z,1520664783.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:53:03.701Z,1520664783.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:53:04.091Z,1520664784.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:53:04.489Z,1520664784.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:53:04.899Z,1520664784.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:53:05.305Z,1520664785.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:53:05.697Z,1520664785.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:53:06.093Z,1520664786.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:53:06.493Z,1520664786.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:53:06.897Z,1520664786.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:53:07.292Z,1520664787.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:53:07.692Z,1520664787.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:53:08.128Z,1520664788.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:53:08.502Z,1520664788.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:53:08.902Z,1520664788.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:53:09.297Z,1520664789.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:53:09.693Z,1520664789.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:53:10.094Z,1520664790.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:53:10.490Z,1520664790.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:53:10.909Z,1520664790.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:53:11.309Z,1520664791.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:53:11.698Z,1520664791.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:53:12.097Z,1520664792.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:53:12.497Z,1520664792.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:53:12.902Z,1520664792.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:53:13.309Z,1520664793.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:53:13.699Z,1520664793.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:53:14.091Z,1520664794.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:53:14.491Z,1520664794.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:53:14.902Z,1520664794.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:53:15.308Z,1520664795.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:53:15.734Z,1520664795.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:53:16.097Z,1520664796.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:53:16.497Z,1520664796.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:53:16.892Z,1520664796.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:53:17.293Z,1520664797.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:53:17.699Z,1520664797.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:53:18.106Z,1520664798.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:53:18.513Z,1520664798.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:53:18.903Z,1520664798.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:53:19.301Z,1520664799.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:53:19.701Z,1520664799.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:53:20.101Z,1520664800.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:53:20.481Z,1520664800.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:53:20.902Z,1520664800.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:53:21.301Z,1520664801.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:53:21.711Z,1520664801.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:53:22.101Z,1520664802.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:53:22.482Z,1520664802.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:53:22.896Z,1520664802.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:53:23.285Z,1520664803.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:53:23.705Z,1520664803.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:53:24.111Z,1520664804.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:53:24.511Z,1520664804.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:53:24.954Z,1520664804.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:53:25.289Z,1520664805.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:53:25.681Z,1520664805.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:53:26.086Z,1520664806.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:53:26.487Z,1520664806.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:53:26.910Z,1520664806.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:53:27.310Z,1520664807.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:53:30.431Z,1520664810.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:53:30.603Z,1520664810.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:53:31.027Z,1520664811.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:53:31.373Z,1520664811.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:53:31.778Z,1520664811.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:53:32.189Z,1520664812.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:53:32.624Z,1520664812.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:53:32.979Z,1520664812.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:53:33.375Z,1520664813.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:53:33.777Z,1520664813.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:53:34.173Z,1520664814.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:53:34.574Z,1520664814.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:53:34.985Z,1520664814.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:53:35.387Z,1520664815.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:53:35.783Z,1520664815.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:53:36.177Z,1520664816.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:53:36.575Z,1520664816.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:53:36.976Z,1520664816.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:53:37.377Z,1520664817.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:53:37.774Z,1520664817.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:53:38.189Z,1520664818.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:53:38.586Z,1520664818.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:53:38.986Z,1520664818.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:53:39.384Z,1520664819.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:53:39.784Z,1520664819.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:53:40.164Z,1520664820.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:53:40.569Z,1520664820.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:53:40.995Z,1520664820.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:53:41.394Z,1520664821.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:53:41.793Z,1520664821.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:53:42.166Z,1520664822.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:53:42.599Z,1520664822.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:53:42.997Z,1520664822.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:53:43.366Z,1520664823.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:53:43.768Z,1520664823.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:53:44.182Z,1520664824.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:53:44.613Z,1520664824.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:53:45.014Z,1520664825.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:53:45.409Z,1520664825.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:53:45.781Z,1520664825.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:53:46.180Z,1520664826.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:53:46.580Z,1520664826.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:53:46.993Z,1520664826.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:53:47.393Z,1520664827.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:53:47.801Z,1520664827.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:53:48.184Z,1520664828.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:53:48.577Z,1520664828.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:53:48.989Z,1520664828.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:53:49.437Z,1520664829.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:53:49.766Z,1520664829.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:53:50.186Z,1520664830.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:53:50.591Z,1520664830.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:53:50.990Z,1520664830.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:53:51.368Z,1520664831.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:53:51.761Z,1520664831.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:53:52.162Z,1520664832.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:53:52.561Z,1520664832.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:53:52.990Z,1520664832.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:53:53.390Z,1520664833.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:53:53.790Z,1520664833.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:53:54.179Z,1520664834.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:53:54.570Z,1520664834.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:53:54.976Z,1520664834.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:53:55.404Z,1520664835.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:53:55.832Z,1520664835.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:53:56.177Z,1520664836.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:53:56.578Z,1520664836.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:53:56.985Z,1520664836.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:53:57.376Z,1520664837.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:53:57.781Z,1520664837.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:53:58.173Z,1520664838.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:53:58.569Z,1520664838.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:53:58.982Z,1520664838.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:53:59.389Z,1520664839.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:53:59.789Z,1520664839.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:54:00.177Z,1520664840.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:54:00.565Z,1520664840.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:54:00.977Z,1520664840.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:54:01.372Z,1520664841.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:54:01.769Z,1520664841.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:54:02.175Z,1520664842.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:54:02.579Z,1520664842.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:54:02.975Z,1520664842.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:54:03.373Z,1520664843.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:54:03.771Z,1520664843.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:54:04.172Z,1520664844.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:54:04.571Z,1520664844.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:54:04.985Z,1520664844.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:54:05.375Z,1520664845.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:54:05.775Z,1520664845.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:54:06.173Z,1520664846.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:54:06.577Z,1520664846.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:54:06.969Z,1520664846.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:54:07.380Z,1520664847.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:54:07.789Z,1520664847.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:54:08.178Z,1520664848.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:54:08.577Z,1520664848.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:54:08.977Z,1520664848.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:54:09.369Z,1520664849.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:54:09.776Z,1520664849.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:54:10.178Z,1520664850.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:54:10.589Z,1520664850.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:54:10.988Z,1520664850.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:54:11.381Z,1520664851.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:54:11.789Z,1520664851.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:54:12.172Z,1520664852.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:54:12.571Z,1520664852.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:54:12.971Z,1520664852.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:54:13.372Z,1520664853.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:54:13.771Z,1520664853.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:54:14.183Z,1520664854.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:54:14.588Z,1520664854.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:54:14.983Z,1520664854.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:54:15.374Z,1520664855.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:54:15.771Z,1520664855.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:54:16.175Z,1520664856.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:54:16.574Z,1520664856.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:54:16.930Z,1520664856.930 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-03-10T06:54:16.930Z,1520664856.930 [NAL9602] Data Fault, FailCount= 5
2018-03-10T06:54:16.930Z,1520664856.930 [NAL9602](ERROR): Data Fault
2018-03-10T06:54:16.985Z,1520664856.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:54:17.059Z,1520664857.059 [CBIT](ERROR): Data Fault in component: NAL9602
2018-03-10T06:54:17.059Z,1520664857.059 [CBIT](CRITICAL): Data Fault in component: NAL9602
2018-03-10T06:54:17.332Z,1520664857.332 [NAL9602](INFO): Powering down
2018-03-10T06:54:17.381Z,1520664857.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:54:17.458Z,1520664857.458 [CBIT](INFO): Critical error at 20180310T065417
2018-03-10T06:54:17.774Z,1520664857.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:54:18.172Z,1520664858.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:54:18.571Z,1520664858.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:54:18.972Z,1520664858.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:54:19.374Z,1520664859.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:54:19.774Z,1520664859.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:54:20.182Z,1520664860.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:54:20.585Z,1520664860.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:54:20.975Z,1520664860.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:54:21.376Z,1520664861.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:54:21.778Z,1520664861.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:54:22.179Z,1520664862.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:54:22.592Z,1520664862.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:54:22.989Z,1520664862.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:54:23.361Z,1520664863.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:54:23.762Z,1520664863.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:54:24.164Z,1520664864.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:54:24.561Z,1520664864.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:54:24.992Z,1520664864.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:54:25.363Z,1520664865.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:54:25.760Z,1520664865.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:54:26.169Z,1520664866.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:54:26.564Z,1520664866.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:54:26.957Z,1520664866.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:54:27.369Z,1520664867.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:54:30.490Z,1520664870.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:54:30.652Z,1520664870.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:54:31.047Z,1520664871.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:54:31.442Z,1520664871.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:54:31.841Z,1520664871.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:54:32.249Z,1520664872.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:54:32.672Z,1520664872.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:54:33.045Z,1520664873.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:54:33.449Z,1520664873.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:54:33.850Z,1520664873.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:54:34.229Z,1520664874.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:54:34.647Z,1520664874.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:54:35.028Z,1520664875.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:54:35.456Z,1520664875.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:54:35.857Z,1520664875.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:54:36.253Z,1520664876.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:54:36.627Z,1520664876.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:54:37.051Z,1520664877.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:54:37.427Z,1520664877.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:54:37.856Z,1520664877.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:54:38.235Z,1520664878.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:54:38.657Z,1520664878.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:54:39.026Z,1520664879.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:54:39.432Z,1520664879.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:54:39.826Z,1520664879.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:54:40.254Z,1520664880.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:54:40.636Z,1520664880.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:54:41.032Z,1520664881.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:54:41.427Z,1520664881.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:54:41.853Z,1520664881.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:54:42.236Z,1520664882.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:54:42.628Z,1520664882.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:54:43.030Z,1520664883.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:54:43.454Z,1520664883.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:54:43.829Z,1520664883.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:54:44.233Z,1520664884.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:54:44.636Z,1520664884.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:54:45.069Z,1520664885.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:54:45.464Z,1520664885.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:54:45.832Z,1520664885.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:54:46.228Z,1520664886.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:54:46.653Z,1520664886.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:54:47.032Z,1520664887.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:54:47.428Z,1520664887.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:54:47.831Z,1520664887.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:54:48.256Z,1520664888.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:54:48.629Z,1520664888.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:54:49.032Z,1520664889.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:54:49.426Z,1520664889.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:54:49.854Z,1520664889.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:54:50.234Z,1520664890.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:54:50.632Z,1520664890.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:54:51.028Z,1520664891.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:54:51.453Z,1520664891.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:54:51.834Z,1520664891.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:54:52.232Z,1520664892.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:54:52.637Z,1520664892.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:54:53.056Z,1520664893.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:54:53.433Z,1520664893.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:54:53.833Z,1520664893.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:54:54.230Z,1520664894.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:54:54.651Z,1520664894.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:54:55.033Z,1520664895.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:54:55.432Z,1520664895.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:54:55.833Z,1520664895.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:54:56.253Z,1520664896.253 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:54:56.253Z,1520664896.253 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 33
2018-03-10T06:54:56.253Z,1520664896.253 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-03-10T06:54:56.255Z,1520664896.255 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:54:56.255Z,1520664896.255 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 33
2018-03-10T06:54:56.255Z,1520664896.255 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-03-10T06:54:56.257Z,1520664896.257 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:54:56.257Z,1520664896.257 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 33
2018-03-10T06:54:56.257Z,1520664896.257 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-10T06:54:56.335Z,1520664896.335 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-03-10T06:54:56.335Z,1520664896.335 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-03-10T06:54:56.336Z,1520664896.336 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-10T06:54:56.735Z,1520664896.735 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-03-10T06:54:56.735Z,1520664896.735 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 33
2018-03-10T06:54:56.735Z,1520664896.735 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-03-10T06:54:56.736Z,1520664896.736 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 33
2018-03-10T06:54:56.736Z,1520664896.736 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-10T06:54:56.736Z,1520664896.736 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 33
2018-03-10T06:54:57.037Z,1520664897.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-03-10T06:54:57.037Z,1520664897.037 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-03-10T06:54:57.037Z,1520664897.037 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-03-10T06:54:57.038Z,1520664897.038 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-03-10T06:54:57.038Z,1520664897.038 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-03-10T06:54:57.038Z,1520664897.038 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-03-10T06:54:57.039Z,1520664897.039 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-10T06:54:57.039Z,1520664897.039 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-10T06:54:57.040Z,1520664897.040 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-10T06:54:57.456Z,1520664897.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-03-10T06:54:57.457Z,1520664897.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:54:57.846Z,1520664897.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-03-10T06:54:57.847Z,1520664897.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:54:58.239Z,1520664898.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-03-10T06:54:58.240Z,1520664898.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:54:58.639Z,1520664898.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-03-10T06:54:58.640Z,1520664898.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:54:59.037Z,1520664899.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-03-10T06:54:59.038Z,1520664899.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:54:59.452Z,1520664899.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-03-10T06:54:59.453Z,1520664899.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:54:59.839Z,1520664899.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-03-10T06:54:59.840Z,1520664899.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:55:00.239Z,1520664900.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-03-10T06:55:00.240Z,1520664900.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:55:00.639Z,1520664900.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-03-10T06:55:00.640Z,1520664900.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:55:01.056Z,1520664901.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-03-10T06:55:01.057Z,1520664901.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:55:01.439Z,1520664901.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-03-10T06:55:01.440Z,1520664901.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:55:01.889Z,1520664901.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-03-10T06:55:01.890Z,1520664901.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:55:02.236Z,1520664902.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-03-10T06:55:02.237Z,1520664902.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:55:02.646Z,1520664902.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-03-10T06:55:02.646Z,1520664902.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:55:03.042Z,1520664903.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-03-10T06:55:03.043Z,1520664903.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:55:03.440Z,1520664903.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-03-10T06:55:03.441Z,1520664903.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:55:03.838Z,1520664903.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-03-10T06:55:03.839Z,1520664903.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:55:04.230Z,1520664904.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-03-10T06:55:04.232Z,1520664904.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:55:04.640Z,1520664904.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-03-10T06:55:04.641Z,1520664904.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:55:05.040Z,1520664905.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-03-10T06:55:05.040Z,1520664905.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:55:05.438Z,1520664905.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-03-10T06:55:05.439Z,1520664905.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:55:05.840Z,1520664905.840 [BPC1](ERROR): Failed to receive battery data
2018-03-10T06:55:05.841Z,1520664905.841 [BPC1] Communications Fault, FailCount= 1
2018-03-10T06:55:05.841Z,1520664905.841 [BPC1](ERROR): Communications Fault
2018-03-10T06:55:05.852Z,1520664905.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-03-10T06:55:05.853Z,1520664905.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:55:05.947Z,1520664905.947 [CBIT](ERROR): Communications Fault in component: BPC1
2018-03-10T06:55:06.242Z,1520664906.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-03-10T06:55:06.244Z,1520664906.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:55:06.638Z,1520664906.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-03-10T06:55:06.639Z,1520664906.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:55:07.038Z,1520664907.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-03-10T06:55:07.039Z,1520664907.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:55:07.119Z,1520664907.119 [CBIT](INFO): Clearing failed state for component BPC1
2018-03-10T06:55:07.119Z,1520664907.119 [BPC1] No Fault, FailCount= 1
2018-03-10T06:55:07.497Z,1520664907.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-03-10T06:55:07.498Z,1520664907.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:55:07.842Z,1520664907.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-03-10T06:55:07.843Z,1520664907.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:55:08.240Z,1520664908.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-03-10T06:55:08.241Z,1520664908.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:55:08.646Z,1520664908.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-03-10T06:55:08.647Z,1520664908.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:55:09.052Z,1520664909.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-03-10T06:55:09.053Z,1520664909.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:55:09.437Z,1520664909.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-03-10T06:55:09.438Z,1520664909.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:55:09.834Z,1520664909.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-03-10T06:55:09.835Z,1520664909.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:55:10.229Z,1520664910.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-03-10T06:55:10.230Z,1520664910.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:55:10.660Z,1520664910.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-03-10T06:55:10.660Z,1520664910.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:55:11.036Z,1520664911.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-03-10T06:55:11.037Z,1520664911.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:55:11.429Z,1520664911.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-03-10T06:55:11.430Z,1520664911.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:55:11.835Z,1520664911.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-03-10T06:55:11.836Z,1520664911.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:55:12.242Z,1520664912.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-03-10T06:55:12.242Z,1520664912.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:55:12.633Z,1520664912.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-03-10T06:55:12.634Z,1520664912.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:55:13.034Z,1520664913.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-03-10T06:55:13.035Z,1520664913.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:55:13.435Z,1520664913.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-03-10T06:55:13.436Z,1520664913.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:55:13.861Z,1520664913.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-03-10T06:55:13.862Z,1520664913.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:55:14.237Z,1520664914.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-03-10T06:55:14.238Z,1520664914.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:55:14.635Z,1520664914.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2018-03-10T06:55:14.636Z,1520664914.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:55:15.032Z,1520664915.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2018-03-10T06:55:15.033Z,1520664915.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:55:15.448Z,1520664915.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2018-03-10T06:55:15.449Z,1520664915.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:55:15.838Z,1520664915.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2018-03-10T06:55:15.839Z,1520664915.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:55:16.228Z,1520664916.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 20.0 s old, using for 20.0 s.
2018-03-10T06:55:16.229Z,1520664916.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:55:16.636Z,1520664916.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:55:17.046Z,1520664917.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:55:17.429Z,1520664917.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:55:17.841Z,1520664917.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:55:18.241Z,1520664918.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:55:18.643Z,1520664918.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:55:19.038Z,1520664919.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:55:19.435Z,1520664919.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:55:19.866Z,1520664919.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:55:20.263Z,1520664920.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:55:20.630Z,1520664920.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:55:21.040Z,1520664921.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:55:21.436Z,1520664921.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:55:21.863Z,1520664921.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:55:22.229Z,1520664922.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:55:22.641Z,1520664922.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:55:23.035Z,1520664923.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:55:23.443Z,1520664923.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:55:23.837Z,1520664923.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:55:24.234Z,1520664924.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:55:24.636Z,1520664924.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:55:25.064Z,1520664925.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:55:25.445Z,1520664925.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:55:25.859Z,1520664925.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:55:25.943Z,1520664925.943 [CBIT](DEBUG): EFC running - data check-sum false
2018-03-10T06:55:26.241Z,1520664926.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:55:26.644Z,1520664926.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:55:27.030Z,1520664927.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:55:27.437Z,1520664927.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:55:30.529Z,1520664930.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:55:30.659Z,1520664930.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:55:31.070Z,1520664931.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:55:31.471Z,1520664931.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:55:31.860Z,1520664931.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:55:32.253Z,1520664932.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:55:32.653Z,1520664932.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:55:33.049Z,1520664933.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:55:33.472Z,1520664933.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:55:33.854Z,1520664933.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:55:34.248Z,1520664934.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:55:34.681Z,1520664934.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:55:35.058Z,1520664935.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:55:35.453Z,1520664935.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:55:35.853Z,1520664935.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:55:36.256Z,1520664936.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:55:36.655Z,1520664936.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:55:37.058Z,1520664937.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:55:37.454Z,1520664937.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:55:37.849Z,1520664937.849 [BPC1](FAULT): Failed to initialize
2018-03-10T06:55:37.849Z,1520664937.849 [BPC1] Communications Fault, FailCount= 2
2018-03-10T06:55:37.849Z,1520664937.849 [BPC1](ERROR): Communications Fault
2018-03-10T06:55:37.857Z,1520664937.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:55:37.959Z,1520664937.959 [CBIT](ERROR): Communications Fault in component: BPC1
2018-03-10T06:55:38.261Z,1520664938.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:55:38.659Z,1520664938.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:55:39.056Z,1520664939.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:55:39.135Z,1520664939.135 [CBIT](INFO): Clearing failed state for component BPC1
2018-03-10T06:55:39.135Z,1520664939.135 [BPC1] No Fault, FailCount= 2
2018-03-10T06:55:39.529Z,1520664939.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:55:39.861Z,1520664939.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:55:40.258Z,1520664940.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:55:40.657Z,1520664940.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:55:41.059Z,1520664941.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:55:41.461Z,1520664941.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:55:41.858Z,1520664941.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:55:42.257Z,1520664942.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:55:42.659Z,1520664942.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:55:43.062Z,1520664943.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:55:43.458Z,1520664943.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:55:43.861Z,1520664943.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:55:44.262Z,1520664944.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:55:44.662Z,1520664944.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:55:45.059Z,1520664945.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:55:45.461Z,1520664945.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:55:45.869Z,1520664945.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:55:46.296Z,1520664946.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:55:46.705Z,1520664946.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:55:47.067Z,1520664947.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:55:47.472Z,1520664947.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:55:47.914Z,1520664947.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:55:48.280Z,1520664948.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:55:48.667Z,1520664948.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:55:49.068Z,1520664949.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:55:49.471Z,1520664949.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:55:49.868Z,1520664949.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:55:50.279Z,1520664950.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:55:50.672Z,1520664950.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:55:51.070Z,1520664951.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:55:51.474Z,1520664951.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:55:51.878Z,1520664951.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:55:52.253Z,1520664952.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:55:52.663Z,1520664952.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:55:53.058Z,1520664953.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:55:53.457Z,1520664953.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:55:53.864Z,1520664953.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:55:54.260Z,1520664954.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:55:54.660Z,1520664954.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:55:55.065Z,1520664955.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:55:55.458Z,1520664955.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:55:55.866Z,1520664955.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:55:56.262Z,1520664956.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:55:56.659Z,1520664956.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:55:57.066Z,1520664957.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:55:57.465Z,1520664957.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:55:57.862Z,1520664957.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:55:58.262Z,1520664958.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:55:58.667Z,1520664958.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:55:59.062Z,1520664959.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:55:59.462Z,1520664959.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:55:59.862Z,1520664959.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:56:00.266Z,1520664960.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:56:00.666Z,1520664960.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:56:01.061Z,1520664961.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:56:01.459Z,1520664961.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:56:01.862Z,1520664961.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:56:02.261Z,1520664962.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:56:02.734Z,1520664962.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:56:03.056Z,1520664963.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:56:03.465Z,1520664963.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:56:03.854Z,1520664963.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:56:04.253Z,1520664964.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:56:04.678Z,1520664964.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:56:05.055Z,1520664965.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:56:05.457Z,1520664965.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:56:05.853Z,1520664965.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:56:06.256Z,1520664966.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:56:06.670Z,1520664966.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:56:07.065Z,1520664967.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:56:07.467Z,1520664967.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:56:07.866Z,1520664967.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:56:08.266Z,1520664968.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:56:08.667Z,1520664968.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:56:09.067Z,1520664969.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:56:09.473Z,1520664969.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:56:09.846Z,1520664969.846 [BPC1](FAULT): Failed to initialize
2018-03-10T06:56:09.860Z,1520664969.860 [BPC1] Communications Fault, FailCount= 3
2018-03-10T06:56:09.860Z,1520664969.860 [BPC1](ERROR): Communications Fault
2018-03-10T06:56:09.867Z,1520664969.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:56:09.951Z,1520664969.951 [CBIT](ERROR): Communications Fault in component: BPC1
2018-03-10T06:56:10.267Z,1520664970.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:56:10.666Z,1520664970.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:56:11.067Z,1520664971.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:56:11.155Z,1520664971.155 [CBIT](INFO): Clearing failed state for component BPC1
2018-03-10T06:56:11.155Z,1520664971.155 [BPC1] No Fault, FailCount= 3
2018-03-10T06:56:11.517Z,1520664971.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:56:11.869Z,1520664971.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:56:12.267Z,1520664972.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:56:12.666Z,1520664972.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:56:13.066Z,1520664973.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:56:13.467Z,1520664973.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:56:13.866Z,1520664973.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:56:14.266Z,1520664974.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:56:14.675Z,1520664974.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:56:15.067Z,1520664975.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:56:15.473Z,1520664975.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:56:15.869Z,1520664975.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:56:16.264Z,1520664976.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:56:16.665Z,1520664976.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:56:17.068Z,1520664977.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:56:17.155Z,1520664977.155 [CBIT](INFO): Clearing failed state for component NAL9602
2018-03-10T06:56:17.155Z,1520664977.155 [NAL9602] No Fault, FailCount= 5
2018-03-10T06:56:17.422Z,1520664977.422 [NAL9602](INFO): Powering up NAL9602
2018-03-10T06:56:17.468Z,1520664977.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:56:17.866Z,1520664977.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:56:18.268Z,1520664978.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:56:18.665Z,1520664978.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:56:19.067Z,1520664979.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:56:19.465Z,1520664979.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:56:19.868Z,1520664979.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:56:20.265Z,1520664980.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:56:20.668Z,1520664980.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:56:21.073Z,1520664981.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:56:21.468Z,1520664981.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:56:21.866Z,1520664981.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:56:22.266Z,1520664982.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:56:22.668Z,1520664982.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:56:23.068Z,1520664983.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:56:23.466Z,1520664983.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:56:23.868Z,1520664983.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:56:24.269Z,1520664984.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:56:24.669Z,1520664984.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:56:25.066Z,1520664985.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:56:25.471Z,1520664985.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:56:25.859Z,1520664985.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:56:26.269Z,1520664986.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:56:26.673Z,1520664986.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:56:27.048Z,1520664987.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:56:27.470Z,1520664987.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:56:30.580Z,1520664990.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:56:30.702Z,1520664990.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:56:31.085Z,1520664991.085 [NAL9602](INFO): NAL9602 initialized
2018-03-10T06:56:31.132Z,1520664991.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:56:31.528Z,1520664991.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:56:31.933Z,1520664991.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:56:32.334Z,1520664992.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:56:32.735Z,1520664992.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:56:33.105Z,1520664993.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:56:33.528Z,1520664993.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:56:33.937Z,1520664993.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:56:34.329Z,1520664994.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:56:34.734Z,1520664994.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:56:35.131Z,1520664995.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:56:35.528Z,1520664995.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:56:35.926Z,1520664995.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:56:36.332Z,1520664996.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:56:36.732Z,1520664996.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:56:37.133Z,1520664997.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:56:37.541Z,1520664997.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:56:37.930Z,1520664997.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:56:38.313Z,1520664998.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:56:38.709Z,1520664998.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:56:39.109Z,1520664999.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:56:39.538Z,1520664999.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:56:39.916Z,1520664999.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:56:40.338Z,1520665000.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:56:40.741Z,1520665000.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:56:41.138Z,1520665001.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:56:41.509Z,1520665001.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:56:41.906Z,1520665001.906 [BPC1](FAULT): Failed to initialize
2018-03-10T06:56:41.906Z,1520665001.906 [BPC1] Communications Fault, FailCount= 4
2018-03-10T06:56:41.906Z,1520665001.906 [BPC1](ERROR): Communications Fault
2018-03-10T06:56:41.914Z,1520665001.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:56:42.015Z,1520665002.015 [CBIT](ERROR): Communications Fault in component: BPC1
2018-03-10T06:56:42.318Z,1520665002.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:56:42.715Z,1520665002.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:56:43.142Z,1520665003.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:56:43.219Z,1520665003.219 [CBIT](INFO): Clearing failed state for component BPC1
2018-03-10T06:56:43.219Z,1520665003.219 [BPC1] No Fault, FailCount= 4
2018-03-10T06:56:43.585Z,1520665003.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:56:43.921Z,1520665003.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:56:44.313Z,1520665004.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:56:44.713Z,1520665004.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:56:45.109Z,1520665005.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:56:45.521Z,1520665005.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:56:45.917Z,1520665005.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:56:46.322Z,1520665006.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:56:46.742Z,1520665006.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:56:47.142Z,1520665007.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:56:47.508Z,1520665007.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:56:47.913Z,1520665007.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:56:48.310Z,1520665008.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:56:48.716Z,1520665008.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:56:49.142Z,1520665009.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:56:49.545Z,1520665009.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:56:49.921Z,1520665009.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:56:50.313Z,1520665010.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:56:50.709Z,1520665010.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:56:51.109Z,1520665011.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:56:51.521Z,1520665011.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:56:51.914Z,1520665011.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:56:52.339Z,1520665012.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:56:52.742Z,1520665012.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:56:53.143Z,1520665013.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:56:53.509Z,1520665013.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:56:53.914Z,1520665013.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:56:54.310Z,1520665014.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:56:54.716Z,1520665014.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:56:55.142Z,1520665015.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:56:55.522Z,1520665015.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:56:55.939Z,1520665015.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:56:56.313Z,1520665016.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:56:56.721Z,1520665016.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:56:57.113Z,1520665017.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:56:57.514Z,1520665017.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:56:57.913Z,1520665017.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:56:58.315Z,1520665018.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:56:58.742Z,1520665018.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:56:59.119Z,1520665019.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:56:59.513Z,1520665019.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:56:59.914Z,1520665019.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:57:00.312Z,1520665020.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:57:00.714Z,1520665020.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:57:01.143Z,1520665021.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:57:01.538Z,1520665021.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:57:01.940Z,1520665021.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:57:02.313Z,1520665022.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:57:02.714Z,1520665022.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:57:03.111Z,1520665023.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:57:03.515Z,1520665023.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:57:03.914Z,1520665023.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:57:04.318Z,1520665024.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:57:04.742Z,1520665024.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:57:05.143Z,1520665025.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:57:05.514Z,1520665025.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:57:05.914Z,1520665025.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:57:06.321Z,1520665026.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:57:06.714Z,1520665026.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:57:07.144Z,1520665027.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:57:07.565Z,1520665027.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:57:07.950Z,1520665027.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:57:08.316Z,1520665028.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:57:08.717Z,1520665028.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:57:09.119Z,1520665029.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:57:09.519Z,1520665029.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:57:09.928Z,1520665029.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:57:10.347Z,1520665030.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:57:10.724Z,1520665030.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:57:11.124Z,1520665031.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:57:11.520Z,1520665031.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:57:11.921Z,1520665031.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:57:12.321Z,1520665032.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:57:12.721Z,1520665032.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:57:13.130Z,1520665033.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:57:13.556Z,1520665033.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:57:13.922Z,1520665033.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:57:14.318Z,1520665034.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:57:14.718Z,1520665034.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:57:15.120Z,1520665035.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:57:15.519Z,1520665035.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:57:15.918Z,1520665035.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:57:16.321Z,1520665036.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:57:16.723Z,1520665036.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:57:17.129Z,1520665037.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:57:17.519Z,1520665037.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:57:17.918Z,1520665037.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:57:18.319Z,1520665038.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:57:18.719Z,1520665038.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:57:19.126Z,1520665039.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:57:19.532Z,1520665039.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:57:19.957Z,1520665039.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:57:20.318Z,1520665040.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:57:20.718Z,1520665040.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:57:21.120Z,1520665041.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:57:21.520Z,1520665041.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:57:21.919Z,1520665041.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:57:22.330Z,1520665042.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:57:22.731Z,1520665042.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:57:23.130Z,1520665043.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:57:23.522Z,1520665043.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:57:23.920Z,1520665043.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:57:24.327Z,1520665044.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:57:24.741Z,1520665044.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:57:25.131Z,1520665045.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:57:25.537Z,1520665045.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:57:25.930Z,1520665045.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:57:26.320Z,1520665046.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:57:26.721Z,1520665046.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:57:27.125Z,1520665047.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:57:27.523Z,1520665047.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:57:30.633Z,1520665050.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:57:30.637Z,1520665050.637 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-03-10T06:52:30.4Z
2018-03-10T06:57:30.637Z,1520665050.637 [Default:CheckIn:Read_GPS] Stopped
2018-03-10T06:57:30.637Z,1520665050.637 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-03-10T06:57:30.807Z,1520665050.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:57:31.276Z,1520665051.276 [DataOverHttps](INFO): Sending 69 bytes from file Logs/20180310T051512/Courier0040.lzma
2018-03-10T06:57:31.333Z,1520665051.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:57:31.589Z,1520665051.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:57:31.981Z,1520665051.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:57:32.329Z,1520665052.329 [DataOverHttps](INFO): Moved sent file to Logs/20180310T051512/Courier0040.lzma.bak
2018-03-10T06:57:32.329Z,1520665052.329 [DataOverHttps](INFO): SBD MOMSN=8002504
2018-03-10T06:57:32.420Z,1520665052.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:57:33.042Z,1520665053.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:57:33.215Z,1520665053.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:57:36.380Z,1520665056.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:57:36.537Z,1520665056.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:57:36.918Z,1520665056.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:57:37.319Z,1520665057.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:57:37.719Z,1520665057.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:57:38.127Z,1520665058.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:57:38.527Z,1520665058.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:57:41.641Z,1520665061.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:57:41.818Z,1520665061.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:57:42.155Z,1520665062.155 [DataOverHttps](INFO): Sending 168 bytes from file Logs/20180310T051512/Express0041.lzma
2018-03-10T06:57:42.191Z,1520665062.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:57:42.590Z,1520665062.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:57:42.949Z,1520665062.949 [DataOverHttps](INFO): Moved sent file to Logs/20180310T051512/Express0041.lzma.bak
2018-03-10T06:57:42.949Z,1520665062.949 [DataOverHttps](INFO): SBD MOMSN=8002507
2018-03-10T06:57:43.022Z,1520665063.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:57:43.673Z,1520665063.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:57:43.676Z,1520665063.676 [Default:CheckIn:Read_Iridium] Stopped
2018-03-10T06:57:43.676Z,1520665063.676 [Default:CheckIn:C.Wait] Running Loop=1
2018-03-10T06:57:43.676Z,1520665063.676 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-03-10T06:57:43.838Z,1520665063.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:57:44.249Z,1520665064.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:57:47.584Z,1520665067.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:57:47.784Z,1520665067.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:57:48.160Z,1520665068.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:57:48.633Z,1520665068.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:57:48.945Z,1520665068.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:57:49.325Z,1520665069.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:57:49.730Z,1520665069.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:57:50.113Z,1520665070.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:57:50.536Z,1520665070.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:57:50.947Z,1520665070.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:57:51.353Z,1520665071.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:57:51.744Z,1520665071.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:57:52.148Z,1520665072.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:57:52.517Z,1520665072.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:57:52.914Z,1520665072.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:57:53.313Z,1520665073.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:57:53.713Z,1520665073.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:57:54.145Z,1520665074.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:57:54.546Z,1520665074.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:57:54.944Z,1520665074.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:57:55.318Z,1520665075.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:57:55.719Z,1520665075.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:57:56.115Z,1520665076.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:57:56.518Z,1520665076.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:57:56.920Z,1520665076.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:57:57.343Z,1520665077.343 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:57:57.344Z,1520665077.344 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 34
2018-03-10T06:57:57.344Z,1520665077.344 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-03-10T06:57:57.345Z,1520665077.345 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:57:57.346Z,1520665077.346 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 34
2018-03-10T06:57:57.346Z,1520665077.346 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-03-10T06:57:57.347Z,1520665077.347 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:57:57.348Z,1520665077.348 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 34
2018-03-10T06:57:57.348Z,1520665077.348 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-10T06:57:57.430Z,1520665077.430 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-03-10T06:57:57.430Z,1520665077.430 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-03-10T06:57:57.435Z,1520665077.435 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-10T06:57:57.821Z,1520665077.821 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-03-10T06:57:57.822Z,1520665077.822 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 34
2018-03-10T06:57:57.822Z,1520665077.822 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-03-10T06:57:57.822Z,1520665077.822 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 34
2018-03-10T06:57:57.823Z,1520665077.823 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-10T06:57:57.823Z,1520665077.823 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 34
2018-03-10T06:57:58.132Z,1520665078.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-03-10T06:57:58.132Z,1520665078.132 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-03-10T06:57:58.132Z,1520665078.132 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-03-10T06:57:58.133Z,1520665078.133 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-03-10T06:57:58.133Z,1520665078.133 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-03-10T06:57:58.133Z,1520665078.133 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-03-10T06:57:58.134Z,1520665078.134 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-10T06:57:58.134Z,1520665078.134 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-10T06:57:58.134Z,1520665078.134 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-10T06:57:58.524Z,1520665078.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-03-10T06:57:58.525Z,1520665078.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:57:58.923Z,1520665078.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-03-10T06:57:58.924Z,1520665078.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:57:59.340Z,1520665079.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-03-10T06:57:59.341Z,1520665079.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:57:59.721Z,1520665079.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-03-10T06:57:59.722Z,1520665079.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:58:00.136Z,1520665080.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-03-10T06:58:00.137Z,1520665080.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:58:00.560Z,1520665080.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-03-10T06:58:00.561Z,1520665080.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:58:00.936Z,1520665080.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-03-10T06:58:00.937Z,1520665080.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:58:01.318Z,1520665081.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-03-10T06:58:01.320Z,1520665081.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:58:01.725Z,1520665081.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-03-10T06:58:01.726Z,1520665081.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:58:02.124Z,1520665082.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-03-10T06:58:02.125Z,1520665082.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:58:02.521Z,1520665082.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-03-10T06:58:02.522Z,1520665082.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:58:02.921Z,1520665082.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-03-10T06:58:02.921Z,1520665082.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:58:03.327Z,1520665083.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-03-10T06:58:03.328Z,1520665083.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:58:03.737Z,1520665083.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-03-10T06:58:03.738Z,1520665083.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:58:04.133Z,1520665084.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-03-10T06:58:04.133Z,1520665084.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:58:04.523Z,1520665084.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-03-10T06:58:04.524Z,1520665084.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:58:04.924Z,1520665084.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-03-10T06:58:04.925Z,1520665084.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:58:05.323Z,1520665085.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-03-10T06:58:05.324Z,1520665085.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:58:05.721Z,1520665085.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-03-10T06:58:05.721Z,1520665085.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:58:06.136Z,1520665086.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-03-10T06:58:06.137Z,1520665086.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:58:06.538Z,1520665086.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-03-10T06:58:06.538Z,1520665086.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:58:06.936Z,1520665086.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-03-10T06:58:06.937Z,1520665086.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:58:07.330Z,1520665087.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-03-10T06:58:07.331Z,1520665087.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:58:07.724Z,1520665087.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-03-10T06:58:07.725Z,1520665087.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:58:08.124Z,1520665088.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-03-10T06:58:08.125Z,1520665088.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:58:08.522Z,1520665088.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-03-10T06:58:08.523Z,1520665088.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:58:08.924Z,1520665088.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-03-10T06:58:08.925Z,1520665088.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:58:09.341Z,1520665089.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-03-10T06:58:09.342Z,1520665089.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:58:09.742Z,1520665089.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-03-10T06:58:09.744Z,1520665089.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:58:10.139Z,1520665090.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-03-10T06:58:10.140Z,1520665090.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:58:10.533Z,1520665090.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-03-10T06:58:10.534Z,1520665090.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:58:10.929Z,1520665090.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-03-10T06:58:10.930Z,1520665090.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:58:11.310Z,1520665091.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-03-10T06:58:11.311Z,1520665091.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:58:11.717Z,1520665091.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-03-10T06:58:11.718Z,1520665091.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:58:12.137Z,1520665092.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-03-10T06:58:12.137Z,1520665092.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:58:12.540Z,1520665092.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-03-10T06:58:12.541Z,1520665092.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:58:12.948Z,1520665092.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-03-10T06:58:12.949Z,1520665092.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:58:13.342Z,1520665093.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-03-10T06:58:13.343Z,1520665093.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:58:13.708Z,1520665093.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-03-10T06:58:13.709Z,1520665093.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:58:14.113Z,1520665094.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-03-10T06:58:14.114Z,1520665094.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:58:14.513Z,1520665094.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-03-10T06:58:14.514Z,1520665094.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:58:14.912Z,1520665094.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-03-10T06:58:14.913Z,1520665094.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:58:15.338Z,1520665095.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-03-10T06:58:15.339Z,1520665095.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:58:15.744Z,1520665095.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2018-03-10T06:58:15.745Z,1520665095.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:58:16.140Z,1520665096.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2018-03-10T06:58:16.141Z,1520665096.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:58:16.508Z,1520665096.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2018-03-10T06:58:16.509Z,1520665096.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:58:16.913Z,1520665096.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2018-03-10T06:58:16.914Z,1520665096.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:58:17.316Z,1520665097.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 20.0 s old, using for 20.0 s.
2018-03-10T06:58:17.317Z,1520665097.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:58:17.709Z,1520665097.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:58:18.136Z,1520665098.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:58:18.539Z,1520665098.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:58:18.938Z,1520665098.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:58:19.313Z,1520665099.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:58:19.716Z,1520665099.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:58:20.115Z,1520665100.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:58:20.514Z,1520665100.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:58:20.913Z,1520665100.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:58:21.334Z,1520665101.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:58:21.741Z,1520665101.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:58:22.144Z,1520665102.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:58:22.517Z,1520665102.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:58:22.917Z,1520665102.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:58:23.317Z,1520665103.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:58:23.721Z,1520665103.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:58:24.142Z,1520665104.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:58:24.543Z,1520665104.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:58:24.942Z,1520665104.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:58:25.317Z,1520665105.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:58:25.719Z,1520665105.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:58:26.143Z,1520665106.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:58:26.521Z,1520665106.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:58:26.912Z,1520665106.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:58:27.326Z,1520665107.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:58:27.746Z,1520665107.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:58:28.145Z,1520665108.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:58:28.514Z,1520665108.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:58:28.917Z,1520665108.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:58:29.313Z,1520665109.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:58:29.713Z,1520665109.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:58:30.126Z,1520665110.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:58:30.526Z,1520665110.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:58:30.949Z,1520665110.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:58:31.309Z,1520665111.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:58:31.821Z,1520665111.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:58:32.117Z,1520665112.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:58:32.511Z,1520665112.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:58:32.911Z,1520665112.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:58:33.329Z,1520665113.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:58:33.805Z,1520665113.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:58:34.122Z,1520665114.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:58:34.517Z,1520665114.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:58:34.913Z,1520665114.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:58:35.311Z,1520665115.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:58:35.721Z,1520665115.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:58:36.129Z,1520665116.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:58:36.541Z,1520665116.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:58:36.930Z,1520665116.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:58:37.322Z,1520665117.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:58:37.724Z,1520665117.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:58:38.125Z,1520665118.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:58:38.528Z,1520665118.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:58:38.941Z,1520665118.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:58:39.337Z,1520665119.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:58:39.731Z,1520665119.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:58:40.132Z,1520665120.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:58:40.525Z,1520665120.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:58:40.929Z,1520665120.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:58:41.321Z,1520665121.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:58:41.720Z,1520665121.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:58:42.131Z,1520665122.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:58:42.532Z,1520665122.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:58:42.931Z,1520665122.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:58:43.322Z,1520665123.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:58:43.720Z,1520665123.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:58:44.125Z,1520665124.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:58:47.277Z,1520665127.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:58:47.429Z,1520665127.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:58:47.833Z,1520665127.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:58:48.260Z,1520665128.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:58:48.632Z,1520665128.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:58:49.020Z,1520665129.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:58:49.426Z,1520665129.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:58:49.836Z,1520665129.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:58:50.238Z,1520665130.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:58:50.661Z,1520665130.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:58:51.031Z,1520665131.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:58:51.425Z,1520665131.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:58:51.836Z,1520665131.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:58:52.228Z,1520665132.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:58:52.626Z,1520665132.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:58:53.025Z,1520665133.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:58:53.434Z,1520665133.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:58:53.835Z,1520665133.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:58:54.241Z,1520665134.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:58:54.636Z,1520665134.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:58:55.006Z,1520665135.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:58:55.407Z,1520665135.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:58:55.832Z,1520665135.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:58:56.245Z,1520665136.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:58:56.644Z,1520665136.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:58:57.046Z,1520665137.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:58:57.437Z,1520665137.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:58:57.840Z,1520665137.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:58:58.214Z,1520665138.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:58:58.625Z,1520665138.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:58:59.046Z,1520665139.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:58:59.420Z,1520665139.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:58:59.848Z,1520665139.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:59:00.225Z,1520665140.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:59:00.621Z,1520665140.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:59:01.046Z,1520665141.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:59:01.415Z,1520665141.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:59:01.825Z,1520665141.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:59:02.256Z,1520665142.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:59:02.650Z,1520665142.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:59:03.022Z,1520665143.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:59:03.416Z,1520665143.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:59:03.824Z,1520665143.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:59:04.229Z,1520665144.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:59:04.621Z,1520665144.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:59:05.022Z,1520665145.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:59:05.433Z,1520665145.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:59:05.854Z,1520665145.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:59:06.232Z,1520665146.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:59:06.624Z,1520665146.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:59:07.020Z,1520665147.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:59:07.435Z,1520665147.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:59:07.821Z,1520665147.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:59:08.230Z,1520665148.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:59:08.629Z,1520665148.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:59:09.050Z,1520665149.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:59:09.421Z,1520665149.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:59:09.829Z,1520665149.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:59:10.241Z,1520665150.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:59:10.635Z,1520665150.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:59:11.020Z,1520665151.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:59:11.431Z,1520665151.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:59:11.837Z,1520665151.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:59:12.253Z,1520665152.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:59:12.621Z,1520665152.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:59:13.049Z,1520665153.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:59:13.463Z,1520665153.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:59:13.844Z,1520665153.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:59:14.232Z,1520665154.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:59:14.632Z,1520665154.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:59:15.030Z,1520665155.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:59:15.442Z,1520665155.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:59:15.829Z,1520665155.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:59:16.223Z,1520665156.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:59:16.629Z,1520665156.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:59:17.029Z,1520665157.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:59:17.433Z,1520665157.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:59:17.832Z,1520665157.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:59:18.232Z,1520665158.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:59:18.642Z,1520665158.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:59:19.015Z,1520665159.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:59:19.423Z,1520665159.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:59:19.820Z,1520665159.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:59:20.259Z,1520665160.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:59:20.633Z,1520665160.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:59:21.028Z,1520665161.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:59:21.425Z,1520665161.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:59:21.842Z,1520665161.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:59:22.228Z,1520665162.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:59:22.623Z,1520665162.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:59:23.026Z,1520665163.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:59:23.428Z,1520665163.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:59:23.834Z,1520665163.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:59:24.241Z,1520665164.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:59:24.633Z,1520665164.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:59:25.027Z,1520665165.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:59:25.407Z,1520665165.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:59:25.805Z,1520665165.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:59:26.230Z,1520665166.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:59:26.648Z,1520665166.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:59:27.037Z,1520665167.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:59:27.409Z,1520665167.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:59:27.817Z,1520665167.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:59:28.210Z,1520665168.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:59:28.610Z,1520665168.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:59:29.010Z,1520665169.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:59:29.434Z,1520665169.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:59:29.844Z,1520665169.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:59:30.247Z,1520665170.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:59:30.610Z,1520665170.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:59:31.016Z,1520665171.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:59:31.417Z,1520665171.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:59:31.815Z,1520665171.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:59:32.228Z,1520665172.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:59:32.649Z,1520665172.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:59:33.069Z,1520665173.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:59:33.449Z,1520665173.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:59:33.822Z,1520665173.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:59:34.229Z,1520665174.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:59:34.620Z,1520665174.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:59:35.018Z,1520665175.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:59:35.433Z,1520665175.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:59:35.839Z,1520665175.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:59:36.264Z,1520665176.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:59:36.629Z,1520665176.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:59:37.022Z,1520665177.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:59:37.427Z,1520665177.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:59:37.818Z,1520665177.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:59:38.233Z,1520665178.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:59:38.641Z,1520665178.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:59:39.030Z,1520665179.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:59:39.444Z,1520665179.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:59:39.841Z,1520665179.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:59:40.222Z,1520665180.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:59:40.622Z,1520665180.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:59:41.020Z,1520665181.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:59:41.428Z,1520665181.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:59:41.831Z,1520665181.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:59:42.232Z,1520665182.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:59:42.621Z,1520665182.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:59:43.019Z,1520665183.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:59:43.424Z,1520665183.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:59:43.822Z,1520665183.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:59:44.249Z,1520665184.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:59:47.585Z,1520665187.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:59:47.773Z,1520665187.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:59:48.133Z,1520665188.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:59:48.533Z,1520665188.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:59:48.937Z,1520665188.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:59:49.356Z,1520665189.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:59:49.791Z,1520665189.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:59:50.149Z,1520665190.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:59:50.542Z,1520665190.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:59:50.954Z,1520665190.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:59:51.353Z,1520665191.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:59:51.764Z,1520665191.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:59:52.164Z,1520665192.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:59:52.534Z,1520665192.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:59:52.956Z,1520665192.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:59:53.375Z,1520665193.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:59:53.724Z,1520665193.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:59:54.137Z,1520665194.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:59:54.536Z,1520665194.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:59:54.928Z,1520665194.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:59:55.334Z,1520665195.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:59:55.735Z,1520665195.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:59:56.142Z,1520665196.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:59:56.521Z,1520665196.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:59:56.929Z,1520665196.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:59:57.326Z,1520665197.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:59:57.729Z,1520665197.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:59:58.161Z,1520665198.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:59:58.552Z,1520665198.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:59:58.949Z,1520665198.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:59:59.326Z,1520665199.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T06:59:59.733Z,1520665199.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:00:00.127Z,1520665200.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:00:00.527Z,1520665200.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:00:00.926Z,1520665200.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:00:01.353Z,1520665201.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:00:01.756Z,1520665201.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:00:02.153Z,1520665202.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:00:02.527Z,1520665202.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:00:02.933Z,1520665202.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:00:03.326Z,1520665203.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:00:03.733Z,1520665203.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:00:04.168Z,1520665204.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:00:04.555Z,1520665204.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:00:04.958Z,1520665204.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:00:05.326Z,1520665205.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:00:05.725Z,1520665205.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:00:06.125Z,1520665206.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:00:06.527Z,1520665206.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:00:06.926Z,1520665206.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:00:07.355Z,1520665207.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:00:07.735Z,1520665207.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:00:08.160Z,1520665208.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:00:08.538Z,1520665208.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:00:08.929Z,1520665208.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:00:09.335Z,1520665209.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:00:09.763Z,1520665209.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:00:10.134Z,1520665210.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:00:10.538Z,1520665210.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:00:10.936Z,1520665210.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:00:11.331Z,1520665211.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:00:11.732Z,1520665211.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:00:12.129Z,1520665212.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:00:12.532Z,1520665212.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:00:12.926Z,1520665212.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:00:13.335Z,1520665213.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:00:13.733Z,1520665213.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:00:14.134Z,1520665214.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:00:14.529Z,1520665214.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:00:14.931Z,1520665214.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:00:15.337Z,1520665215.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:00:15.737Z,1520665215.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:00:16.134Z,1520665216.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:00:16.545Z,1520665216.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:00:16.965Z,1520665216.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:00:17.326Z,1520665217.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:00:17.737Z,1520665217.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:00:18.129Z,1520665218.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:00:18.533Z,1520665218.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:00:18.937Z,1520665218.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:00:19.337Z,1520665219.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:00:19.744Z,1520665219.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:00:20.137Z,1520665220.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:00:20.537Z,1520665220.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:00:20.939Z,1520665220.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:00:21.353Z,1520665221.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:00:21.737Z,1520665221.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:00:22.142Z,1520665222.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:00:22.549Z,1520665222.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:00:22.941Z,1520665222.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:00:23.333Z,1520665223.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:00:23.729Z,1520665223.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:00:24.129Z,1520665224.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:00:24.536Z,1520665224.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:00:24.937Z,1520665224.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:00:25.339Z,1520665225.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:00:25.749Z,1520665225.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:00:26.142Z,1520665226.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:00:26.529Z,1520665226.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:00:26.933Z,1520665226.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:00:27.333Z,1520665227.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:00:27.737Z,1520665227.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:00:28.143Z,1520665228.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:00:28.634Z,1520665228.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:00:28.948Z,1520665228.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:00:29.353Z,1520665229.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:00:29.733Z,1520665229.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:00:30.131Z,1520665230.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:00:30.531Z,1520665230.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:00:30.931Z,1520665230.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:00:31.342Z,1520665231.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:00:31.743Z,1520665231.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:00:32.142Z,1520665232.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:00:32.564Z,1520665232.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:00:32.932Z,1520665232.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:00:33.337Z,1520665233.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:00:33.737Z,1520665233.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:00:34.146Z,1520665234.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:00:34.542Z,1520665234.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:00:34.942Z,1520665234.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:00:35.340Z,1520665235.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:00:35.735Z,1520665235.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:00:36.135Z,1520665236.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:00:36.532Z,1520665236.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:00:36.934Z,1520665236.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:00:37.343Z,1520665237.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:00:37.744Z,1520665237.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:00:38.143Z,1520665238.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:00:38.534Z,1520665238.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:00:38.935Z,1520665238.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:00:39.333Z,1520665239.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:00:39.734Z,1520665239.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:00:40.145Z,1520665240.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:00:40.544Z,1520665240.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:00:40.944Z,1520665240.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:00:41.341Z,1520665241.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:00:41.760Z,1520665241.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:00:42.137Z,1520665242.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:00:42.535Z,1520665242.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:00:42.935Z,1520665242.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:00:43.345Z,1520665243.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:00:43.753Z,1520665243.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:00:44.160Z,1520665244.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:00:44.540Z,1520665244.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:00:47.647Z,1520665247.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:00:47.815Z,1520665247.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:00:48.217Z,1520665248.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:00:48.616Z,1520665248.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:00:49.037Z,1520665249.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:00:49.398Z,1520665249.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:00:49.805Z,1520665249.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:00:50.196Z,1520665250.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:00:50.603Z,1520665250.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:00:51.000Z,1520665251.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:00:51.410Z,1520665251.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:00:51.810Z,1520665251.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:00:52.237Z,1520665252.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:00:52.597Z,1520665252.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:00:52.997Z,1520665252.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:00:53.403Z,1520665253.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:00:53.808Z,1520665253.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:00:54.237Z,1520665254.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:00:54.617Z,1520665254.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:00:55.015Z,1520665255.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:00:55.426Z,1520665255.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:00:55.810Z,1520665255.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:00:56.198Z,1520665256.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:00:56.601Z,1520665256.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:00:57.001Z,1520665257.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:00:57.405Z,1520665257.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:00:57.810Z,1520665257.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:00:58.211Z,1520665258.211 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:00:58.212Z,1520665258.212 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 35
2018-03-10T07:00:58.212Z,1520665258.212 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-03-10T07:00:58.213Z,1520665258.213 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:00:58.213Z,1520665258.213 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 35
2018-03-10T07:00:58.213Z,1520665258.213 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-03-10T07:00:58.215Z,1520665258.215 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:00:58.215Z,1520665258.215 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 35
2018-03-10T07:00:58.215Z,1520665258.215 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-10T07:00:58.307Z,1520665258.307 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-03-10T07:00:58.307Z,1520665258.307 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-03-10T07:00:58.307Z,1520665258.307 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-10T07:00:58.691Z,1520665258.691 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-03-10T07:00:58.691Z,1520665258.691 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 35
2018-03-10T07:00:58.692Z,1520665258.692 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-03-10T07:00:58.692Z,1520665258.692 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 35
2018-03-10T07:00:58.692Z,1520665258.692 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-10T07:00:58.692Z,1520665258.692 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 35
2018-03-10T07:00:59.010Z,1520665259.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-03-10T07:00:59.012Z,1520665259.012 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-03-10T07:00:59.012Z,1520665259.012 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-03-10T07:00:59.012Z,1520665259.012 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-03-10T07:00:59.013Z,1520665259.013 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-03-10T07:00:59.013Z,1520665259.013 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-03-10T07:00:59.013Z,1520665259.013 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-10T07:00:59.014Z,1520665259.014 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-10T07:00:59.014Z,1520665259.014 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-10T07:00:59.389Z,1520665259.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-03-10T07:00:59.390Z,1520665259.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:00:59.789Z,1520665259.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-03-10T07:00:59.790Z,1520665259.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:01:00.224Z,1520665260.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-03-10T07:01:00.225Z,1520665260.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:01:00.623Z,1520665260.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-03-10T07:01:00.624Z,1520665260.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:01:01.016Z,1520665261.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-03-10T07:01:01.017Z,1520665261.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:01:01.394Z,1520665261.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-03-10T07:01:01.395Z,1520665261.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:01:01.793Z,1520665261.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-03-10T07:01:01.794Z,1520665261.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:01:02.200Z,1520665262.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-03-10T07:01:02.202Z,1520665262.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:01:02.593Z,1520665262.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-03-10T07:01:02.594Z,1520665262.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:01:02.993Z,1520665262.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-03-10T07:01:02.994Z,1520665262.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:01:03.432Z,1520665263.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-03-10T07:01:03.433Z,1520665263.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:01:03.803Z,1520665263.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-03-10T07:01:03.805Z,1520665263.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:01:04.202Z,1520665264.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-03-10T07:01:04.204Z,1520665264.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:01:04.597Z,1520665264.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-03-10T07:01:04.598Z,1520665264.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:01:05.004Z,1520665265.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-03-10T07:01:05.004Z,1520665265.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:01:05.400Z,1520665265.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-03-10T07:01:05.400Z,1520665265.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:01:05.802Z,1520665265.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-03-10T07:01:05.803Z,1520665265.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:01:06.234Z,1520665266.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-03-10T07:01:06.235Z,1520665266.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:01:06.609Z,1520665266.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-03-10T07:01:06.610Z,1520665266.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:01:07.031Z,1520665267.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-03-10T07:01:07.032Z,1520665267.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:01:07.397Z,1520665267.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-03-10T07:01:07.398Z,1520665267.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:01:07.798Z,1520665267.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-03-10T07:01:07.799Z,1520665267.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:01:08.204Z,1520665268.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-03-10T07:01:08.205Z,1520665268.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:01:08.598Z,1520665268.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-03-10T07:01:08.599Z,1520665268.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:01:08.999Z,1520665268.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-03-10T07:01:09.000Z,1520665269.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:01:09.405Z,1520665269.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-03-10T07:01:09.406Z,1520665269.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:01:09.804Z,1520665269.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-03-10T07:01:09.805Z,1520665269.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:01:10.212Z,1520665270.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-03-10T07:01:10.213Z,1520665270.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:01:10.604Z,1520665270.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-03-10T07:01:10.605Z,1520665270.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:01:10.998Z,1520665270.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-03-10T07:01:10.998Z,1520665270.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:01:11.399Z,1520665271.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-03-10T07:01:11.400Z,1520665271.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:01:11.808Z,1520665271.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-03-10T07:01:11.809Z,1520665271.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:01:12.205Z,1520665272.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-03-10T07:01:12.205Z,1520665272.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:01:12.606Z,1520665272.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-03-10T07:01:12.607Z,1520665272.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:01:13.006Z,1520665273.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-03-10T07:01:13.007Z,1520665273.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:01:13.397Z,1520665273.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-03-10T07:01:13.398Z,1520665273.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:01:13.798Z,1520665273.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-03-10T07:01:13.800Z,1520665273.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:01:14.198Z,1520665274.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-03-10T07:01:14.199Z,1520665274.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:01:14.598Z,1520665274.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-03-10T07:01:14.599Z,1520665274.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:01:15.006Z,1520665275.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-03-10T07:01:15.008Z,1520665275.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:01:15.410Z,1520665275.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-03-10T07:01:15.411Z,1520665275.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:01:15.810Z,1520665275.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-03-10T07:01:15.811Z,1520665275.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:01:16.210Z,1520665276.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-03-10T07:01:16.212Z,1520665276.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:01:16.608Z,1520665276.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2018-03-10T07:01:16.609Z,1520665276.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:01:16.000Z,1520665277.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2018-03-10T07:01:17.000Z,1520665277.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:01:17.400Z,1520665277.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2018-03-10T07:01:17.401Z,1520665277.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:01:17.807Z,1520665277.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2018-03-10T07:01:17.808Z,1520665277.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:01:18.229Z,1520665278.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:01:18.611Z,1520665278.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:01:19.022Z,1520665279.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:01:19.426Z,1520665279.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:01:19.811Z,1520665279.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:01:20.193Z,1520665280.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:01:20.595Z,1520665280.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:01:20.991Z,1520665280.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:01:21.423Z,1520665281.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:01:21.822Z,1520665281.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:01:22.228Z,1520665282.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:01:22.601Z,1520665282.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:01:22.994Z,1520665282.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:01:23.396Z,1520665283.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:01:23.799Z,1520665283.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:01:24.210Z,1520665284.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:01:24.612Z,1520665284.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:01:25.003Z,1520665285.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:01:25.398Z,1520665285.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:01:25.803Z,1520665285.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:01:26.200Z,1520665286.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:01:26.609Z,1520665286.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:01:26.000Z,1520665287.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:01:27.407Z,1520665287.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:01:27.814Z,1520665287.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:01:28.209Z,1520665288.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:01:28.602Z,1520665288.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:01:28.998Z,1520665288.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:01:29.413Z,1520665289.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:01:29.802Z,1520665289.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:01:30.209Z,1520665290.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:01:30.625Z,1520665290.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:01:31.033Z,1520665291.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:01:31.409Z,1520665291.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:01:31.821Z,1520665291.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:01:32.207Z,1520665292.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:01:32.613Z,1520665292.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:01:32.990Z,1520665292.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:01:33.421Z,1520665293.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:01:33.814Z,1520665293.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:01:34.219Z,1520665294.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:01:34.597Z,1520665294.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:01:34.994Z,1520665294.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:01:35.394Z,1520665295.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:01:35.796Z,1520665295.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:01:36.222Z,1520665296.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:01:36.628Z,1520665296.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:01:36.999Z,1520665296.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:01:37.393Z,1520665297.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:01:37.794Z,1520665297.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:01:38.194Z,1520665298.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:01:38.594Z,1520665298.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:01:38.994Z,1520665298.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:01:39.423Z,1520665299.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:01:39.802Z,1520665299.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:01:40.204Z,1520665300.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:01:40.597Z,1520665300.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:01:40.998Z,1520665300.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:01:41.398Z,1520665301.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:01:41.805Z,1520665301.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:01:42.204Z,1520665302.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:01:42.629Z,1520665302.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:01:43.040Z,1520665303.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:01:43.431Z,1520665303.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:01:43.801Z,1520665303.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:01:44.200Z,1520665304.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:01:44.606Z,1520665304.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:01:48.109Z,1520665308.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:01:48.328Z,1520665308.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:01:48.703Z,1520665308.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:01:49.133Z,1520665309.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:01:49.493Z,1520665309.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:01:49.897Z,1520665309.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:01:50.293Z,1520665310.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:01:50.690Z,1520665310.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:01:51.118Z,1520665311.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:01:51.517Z,1520665311.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:01:51.905Z,1520665311.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:01:52.297Z,1520665312.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:01:52.697Z,1520665312.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:01:53.103Z,1520665313.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:01:53.503Z,1520665313.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:01:53.904Z,1520665313.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:01:54.301Z,1520665314.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:01:54.691Z,1520665314.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:01:55.104Z,1520665315.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:01:55.499Z,1520665315.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:01:55.896Z,1520665315.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:01:56.309Z,1520665316.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:01:56.707Z,1520665316.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:01:57.109Z,1520665317.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:01:57.497Z,1520665317.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:01:57.894Z,1520665317.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:01:58.292Z,1520665318.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:01:58.696Z,1520665318.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:01:59.109Z,1520665319.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:01:59.502Z,1520665319.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:01:59.913Z,1520665319.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:02:00.308Z,1520665320.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:02:00.697Z,1520665320.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:02:01.081Z,1520665321.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:02:01.482Z,1520665321.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:02:01.886Z,1520665321.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:02:02.311Z,1520665322.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:02:02.714Z,1520665322.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:02:03.114Z,1520665323.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:02:03.485Z,1520665323.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:02:03.893Z,1520665323.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:02:04.285Z,1520665324.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:02:04.686Z,1520665324.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:02:05.114Z,1520665325.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:02:05.514Z,1520665325.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:02:05.919Z,1520665325.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:02:06.293Z,1520665326.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:02:06.686Z,1520665326.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:02:07.097Z,1520665327.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:02:07.497Z,1520665327.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:02:07.916Z,1520665327.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:02:08.301Z,1520665328.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:02:08.696Z,1520665328.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:02:09.094Z,1520665329.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:02:09.493Z,1520665329.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:02:09.893Z,1520665329.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:02:10.291Z,1520665330.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:02:10.694Z,1520665330.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:02:11.101Z,1520665331.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:02:11.495Z,1520665331.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:02:11.920Z,1520665331.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:02:12.305Z,1520665332.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:02:12.681Z,1520665332.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:02:13.121Z,1520665333.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:02:13.616Z,1520665333.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:02:13.888Z,1520665333.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:02:14.309Z,1520665334.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:02:14.721Z,1520665334.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:02:15.110Z,1520665335.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:02:15.484Z,1520665335.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:02:15.889Z,1520665335.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:02:16.288Z,1520665336.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:02:16.682Z,1520665336.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:02:17.112Z,1520665337.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:02:17.507Z,1520665337.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:02:17.903Z,1520665337.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:02:18.316Z,1520665338.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:02:18.761Z,1520665338.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:02:19.089Z,1520665339.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:02:19.489Z,1520665339.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:02:19.889Z,1520665339.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:02:20.323Z,1520665340.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:02:20.713Z,1520665340.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:02:21.115Z,1520665341.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:02:21.485Z,1520665341.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:02:21.897Z,1520665341.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:02:22.285Z,1520665342.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:02:22.684Z,1520665342.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:02:23.115Z,1520665343.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:02:23.498Z,1520665343.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:02:23.895Z,1520665343.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:02:24.289Z,1520665344.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:02:24.689Z,1520665344.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:02:25.090Z,1520665345.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:02:25.490Z,1520665345.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:02:25.895Z,1520665345.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:02:26.329Z,1520665346.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:02:26.694Z,1520665346.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:02:27.120Z,1520665347.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:02:27.490Z,1520665347.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:02:27.889Z,1520665347.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:02:28.297Z,1520665348.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:02:28.692Z,1520665348.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:02:29.091Z,1520665349.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:02:29.494Z,1520665349.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:02:29.892Z,1520665349.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:02:30.297Z,1520665350.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:02:30.689Z,1520665350.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:02:31.095Z,1520665351.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:02:31.502Z,1520665351.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:02:31.895Z,1520665351.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:02:32.290Z,1520665352.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:02:32.689Z,1520665352.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:02:33.096Z,1520665353.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:02:33.521Z,1520665353.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:02:33.897Z,1520665353.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:02:34.297Z,1520665354.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:02:34.705Z,1520665354.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:02:35.097Z,1520665355.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:02:35.497Z,1520665355.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:02:35.894Z,1520665355.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:02:36.293Z,1520665356.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:02:36.690Z,1520665356.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:02:37.099Z,1520665357.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:02:37.505Z,1520665357.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:02:37.897Z,1520665357.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:02:38.290Z,1520665358.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:02:38.697Z,1520665358.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:02:39.096Z,1520665359.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:02:39.513Z,1520665359.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:02:39.897Z,1520665359.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:02:40.301Z,1520665360.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:02:40.703Z,1520665360.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:02:41.102Z,1520665361.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:02:41.491Z,1520665361.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:02:41.932Z,1520665361.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:02:42.291Z,1520665362.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:02:42.689Z,1520665362.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:02:43.102Z,1520665363.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:02:43.502Z,1520665363.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:02:43.901Z,1520665363.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:02:43.904Z,1520665363.904 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-03-10T07:02:43.904Z,1520665363.904 [Default:CheckIn:C.Wait] Stopped
2018-03-10T07:02:43.904Z,1520665363.904 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-03-10T07:02:43.905Z,1520665363.905 [Default:CheckIn:D] Running Loop=1
2018-03-10T07:02:44.293Z,1520665364.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:02:44.296Z,1520665364.296 [Default:CheckIn:D] Stopped
2018-03-10T07:02:44.296Z,1520665364.296 [Default:CheckIn:E] Running Loop=1
2018-03-10T07:02:44.697Z,1520665364.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:02:44.700Z,1520665364.700 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 103.439591 min 
2018-03-10T07:02:44.700Z,1520665364.700 [Default:CheckIn:E] Stopped
2018-03-10T07:02:44.700Z,1520665364.700 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-03-10T07:02:44.700Z,1520665364.700 [Default:CheckIn] Stopped
2018-03-10T07:02:44.701Z,1520665364.701 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-03-10T07:02:44.701Z,1520665364.701 [Default:CheckIn](INFO): Running loop #11
2018-03-10T07:02:44.701Z,1520665364.701 [Default:CheckIn] Running Loop=11
2018-03-10T07:02:44.701Z,1520665364.701 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-03-10T07:02:44.701Z,1520665364.701 [Default:CheckIn:Read_GPS] Running Loop=1
2018-03-10T07:02:47.816Z,1520665367.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:02:48.000Z,1520665368.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:02:48.387Z,1520665368.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:02:48.801Z,1520665368.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:02:49.193Z,1520665369.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:02:49.593Z,1520665369.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:02:49.994Z,1520665369.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:02:50.389Z,1520665370.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:02:50.765Z,1520665370.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:02:51.197Z,1520665371.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:02:51.588Z,1520665371.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:02:51.987Z,1520665371.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:02:52.406Z,1520665372.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:02:52.797Z,1520665372.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:02:53.165Z,1520665373.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:02:53.591Z,1520665373.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:02:53.965Z,1520665373.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:02:54.387Z,1520665374.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:02:54.801Z,1520665374.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:02:55.187Z,1520665375.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:02:55.589Z,1520665375.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:02:55.990Z,1520665375.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:02:56.368Z,1520665376.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:02:56.789Z,1520665376.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:02:57.197Z,1520665377.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:02:57.590Z,1520665377.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:02:57.988Z,1520665377.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:02:58.369Z,1520665378.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:02:58.766Z,1520665378.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:02:59.166Z,1520665379.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:02:59.570Z,1520665379.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:02:59.993Z,1520665379.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:03:00.409Z,1520665380.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:03:00.804Z,1520665380.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:03:01.199Z,1520665381.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:03:01.570Z,1520665381.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:03:01.971Z,1520665381.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:03:02.374Z,1520665382.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:03:02.769Z,1520665382.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:03:03.207Z,1520665383.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:03:03.603Z,1520665383.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:03:03.978Z,1520665383.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:03:04.375Z,1520665384.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:03:04.773Z,1520665384.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:03:05.181Z,1520665385.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:03:05.608Z,1520665385.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:03:05.973Z,1520665385.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:03:06.379Z,1520665386.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:03:06.779Z,1520665386.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:03:07.179Z,1520665387.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:03:07.573Z,1520665387.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:03:07.978Z,1520665387.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:03:08.381Z,1520665388.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:03:08.773Z,1520665388.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:03:09.179Z,1520665389.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:03:09.577Z,1520665389.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:03:09.979Z,1520665389.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:03:10.374Z,1520665390.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:03:10.776Z,1520665390.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:03:11.173Z,1520665391.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:03:11.575Z,1520665391.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:03:11.975Z,1520665391.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:03:12.379Z,1520665392.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:03:12.786Z,1520665392.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:03:13.212Z,1520665393.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:03:13.573Z,1520665393.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:03:13.974Z,1520665393.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:03:14.377Z,1520665394.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:03:14.777Z,1520665394.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:03:15.189Z,1520665395.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:03:15.582Z,1520665395.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:03:15.981Z,1520665395.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:03:16.374Z,1520665396.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:03:16.781Z,1520665396.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:03:17.173Z,1520665397.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:03:17.586Z,1520665397.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:03:17.997Z,1520665397.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:03:18.387Z,1520665398.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:03:18.787Z,1520665398.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:03:19.189Z,1520665399.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:03:19.585Z,1520665399.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:03:19.976Z,1520665399.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:03:20.385Z,1520665400.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:03:20.775Z,1520665400.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:03:21.188Z,1520665401.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:03:21.591Z,1520665401.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:03:21.986Z,1520665401.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:03:22.378Z,1520665402.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:03:22.781Z,1520665402.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:03:23.185Z,1520665403.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:03:23.578Z,1520665403.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:03:23.985Z,1520665403.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:03:24.389Z,1520665404.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:03:24.793Z,1520665404.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:03:25.224Z,1520665405.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:03:25.585Z,1520665405.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:03:25.979Z,1520665405.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:03:26.378Z,1520665406.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:03:26.785Z,1520665406.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:03:27.189Z,1520665407.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:03:27.591Z,1520665407.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:03:27.987Z,1520665407.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:03:28.380Z,1520665408.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:03:28.779Z,1520665408.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:03:29.178Z,1520665409.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:03:29.578Z,1520665409.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:03:29.986Z,1520665409.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:03:30.394Z,1520665410.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:03:30.809Z,1520665410.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:03:31.188Z,1520665411.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:03:31.581Z,1520665411.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:03:31.984Z,1520665411.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:03:32.366Z,1520665412.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:03:32.765Z,1520665412.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:03:33.190Z,1520665413.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:03:33.589Z,1520665413.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:03:33.989Z,1520665413.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:03:34.366Z,1520665414.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:03:34.788Z,1520665414.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:03:35.165Z,1520665415.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:03:35.587Z,1520665415.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:03:35.967Z,1520665415.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:03:36.395Z,1520665416.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:03:36.797Z,1520665416.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:03:37.200Z,1520665417.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:03:37.577Z,1520665417.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:03:38.002Z,1520665418.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:03:38.375Z,1520665418.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:03:38.777Z,1520665418.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:03:39.180Z,1520665419.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:03:39.602Z,1520665419.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:03:39.980Z,1520665419.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:03:40.384Z,1520665420.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:03:40.777Z,1520665420.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:03:41.178Z,1520665421.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:03:41.580Z,1520665421.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:03:41.975Z,1520665421.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:03:42.379Z,1520665422.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:03:42.786Z,1520665422.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:03:43.212Z,1520665423.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:03:43.574Z,1520665423.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:03:43.974Z,1520665423.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:03:44.373Z,1520665424.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:03:44.772Z,1520665424.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:03:49.224Z,1520665429.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:03:49.416Z,1520665429.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:03:49.793Z,1520665429.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:03:50.229Z,1520665430.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:03:50.581Z,1520665430.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:03:50.979Z,1520665430.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:03:51.392Z,1520665431.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:03:51.790Z,1520665431.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:03:52.187Z,1520665432.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:03:52.580Z,1520665432.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:03:52.979Z,1520665432.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:03:53.376Z,1520665433.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:03:53.781Z,1520665433.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:03:54.197Z,1520665434.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:03:54.588Z,1520665434.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:03:55.004Z,1520665435.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:03:55.380Z,1520665435.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:03:55.777Z,1520665435.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:03:56.178Z,1520665436.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:03:56.578Z,1520665436.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:03:56.973Z,1520665436.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:03:57.400Z,1520665437.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:03:57.794Z,1520665437.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:03:58.198Z,1520665438.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:03:58.587Z,1520665438.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:03:58.970Z,1520665438.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:03:59.370Z,1520665439.370 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:03:59.370Z,1520665439.370 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 36
2018-03-10T07:03:59.370Z,1520665439.370 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-03-10T07:03:59.373Z,1520665439.373 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:03:59.373Z,1520665439.373 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 36
2018-03-10T07:03:59.373Z,1520665439.373 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-03-10T07:03:59.395Z,1520665439.395 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:03:59.395Z,1520665439.395 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 36
2018-03-10T07:03:59.395Z,1520665439.395 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-10T07:03:59.479Z,1520665439.479 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-03-10T07:03:59.479Z,1520665439.479 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-03-10T07:03:59.479Z,1520665439.479 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-10T07:03:59.843Z,1520665439.843 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-03-10T07:03:59.843Z,1520665439.843 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 36
2018-03-10T07:03:59.844Z,1520665439.844 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-03-10T07:03:59.844Z,1520665439.844 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 36
2018-03-10T07:03:59.844Z,1520665439.844 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-10T07:03:59.844Z,1520665439.844 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 36
2018-03-10T07:04:00.200Z,1520665440.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-03-10T07:04:00.200Z,1520665440.200 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-03-10T07:04:00.200Z,1520665440.200 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-03-10T07:04:00.201Z,1520665440.201 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-03-10T07:04:00.201Z,1520665440.201 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-03-10T07:04:00.201Z,1520665440.201 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-03-10T07:04:00.202Z,1520665440.202 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-10T07:04:00.202Z,1520665440.202 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-10T07:04:00.203Z,1520665440.203 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-10T07:04:00.581Z,1520665440.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-03-10T07:04:00.582Z,1520665440.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:04:00.989Z,1520665440.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-03-10T07:04:00.990Z,1520665440.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:04:01.380Z,1520665441.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-03-10T07:04:01.381Z,1520665441.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:04:01.775Z,1520665441.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-03-10T07:04:01.776Z,1520665441.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:04:02.191Z,1520665442.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-03-10T07:04:02.192Z,1520665442.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:04:02.596Z,1520665442.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-03-10T07:04:02.597Z,1520665442.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:04:02.975Z,1520665442.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-03-10T07:04:02.976Z,1520665442.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:04:03.386Z,1520665443.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-03-10T07:04:03.387Z,1520665443.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:04:03.789Z,1520665443.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-03-10T07:04:03.790Z,1520665443.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:04:04.192Z,1520665444.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-03-10T07:04:04.193Z,1520665444.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:04:04.577Z,1520665444.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-03-10T07:04:04.578Z,1520665444.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:04:04.977Z,1520665444.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-03-10T07:04:04.978Z,1520665444.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:04:05.365Z,1520665445.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-03-10T07:04:05.366Z,1520665445.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:04:05.766Z,1520665445.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-03-10T07:04:05.767Z,1520665445.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:04:06.189Z,1520665446.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-03-10T07:04:06.190Z,1520665446.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:04:06.594Z,1520665446.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-03-10T07:04:06.595Z,1520665446.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:04:06.995Z,1520665446.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-03-10T07:04:06.996Z,1520665446.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:04:07.373Z,1520665447.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-03-10T07:04:07.374Z,1520665447.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:04:07.805Z,1520665447.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-03-10T07:04:07.807Z,1520665447.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:04:08.176Z,1520665448.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-03-10T07:04:08.177Z,1520665448.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:04:08.580Z,1520665448.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-03-10T07:04:08.581Z,1520665448.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:04:08.976Z,1520665448.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-03-10T07:04:08.977Z,1520665448.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:04:09.379Z,1520665449.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-03-10T07:04:09.380Z,1520665449.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:04:09.774Z,1520665449.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-03-10T07:04:09.775Z,1520665449.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:04:10.186Z,1520665450.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-03-10T07:04:10.207Z,1520665450.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:04:10.574Z,1520665450.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-03-10T07:04:10.575Z,1520665450.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:04:10.980Z,1520665450.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-03-10T07:04:10.981Z,1520665450.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:04:11.373Z,1520665451.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-03-10T07:04:11.374Z,1520665451.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:04:11.784Z,1520665451.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-03-10T07:04:11.785Z,1520665451.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:04:12.182Z,1520665452.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-03-10T07:04:12.183Z,1520665452.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:04:12.581Z,1520665452.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-03-10T07:04:12.582Z,1520665452.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:04:12.974Z,1520665452.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-03-10T07:04:12.974Z,1520665452.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:04:13.375Z,1520665453.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-03-10T07:04:13.376Z,1520665453.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:04:13.773Z,1520665453.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-03-10T07:04:13.774Z,1520665453.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:04:14.181Z,1520665454.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-03-10T07:04:14.182Z,1520665454.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:04:14.581Z,1520665454.581 [BPC1](ERROR): Bank B: No match for stick 5 serial number:1717 in the onboard configuration file.
2018-03-10T07:04:14.581Z,1520665454.581 [BPC1](ERROR): Failed to parse Bank B battery data
2018-03-10T07:04:14.581Z,1520665454.581 [BPC1] Data Fault, FailCount= 1
2018-03-10T07:04:14.581Z,1520665454.581 [BPC1](ERROR): Data Fault
2018-03-10T07:04:14.589Z,1520665454.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-03-10T07:04:14.590Z,1520665454.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:04:14.691Z,1520665454.691 [CBIT](ERROR): Data Fault in component: BPC1
2018-03-10T07:04:14.986Z,1520665454.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-03-10T07:04:14.987Z,1520665454.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:04:15.375Z,1520665455.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-03-10T07:04:15.376Z,1520665455.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:04:15.774Z,1520665455.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-03-10T07:04:15.775Z,1520665455.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:04:15.856Z,1520665455.856 [CBIT](INFO): Clearing failed state for component BPC1
2018-03-10T07:04:15.856Z,1520665455.856 [BPC1] No Fault, FailCount= 1
2018-03-10T07:04:16.233Z,1520665456.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.9 s old, using for 20.0 s.
2018-03-10T07:04:16.234Z,1520665456.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:04:16.580Z,1520665456.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-03-10T07:04:16.581Z,1520665456.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:04:16.985Z,1520665456.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-03-10T07:04:16.986Z,1520665456.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:04:17.386Z,1520665457.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-03-10T07:04:17.387Z,1520665457.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:04:17.786Z,1520665457.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2018-03-10T07:04:17.787Z,1520665457.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:04:18.180Z,1520665458.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2018-03-10T07:04:18.181Z,1520665458.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:04:18.580Z,1520665458.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2018-03-10T07:04:18.581Z,1520665458.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:04:18.980Z,1520665458.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2018-03-10T07:04:18.981Z,1520665458.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:04:19.378Z,1520665459.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:04:19.780Z,1520665459.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:04:20.187Z,1520665460.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:04:20.582Z,1520665460.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:04:20.993Z,1520665460.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:04:21.381Z,1520665461.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:04:21.812Z,1520665461.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:04:22.176Z,1520665462.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:04:22.575Z,1520665462.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:04:22.986Z,1520665462.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:04:23.385Z,1520665463.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:04:23.793Z,1520665463.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:04:24.176Z,1520665464.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:04:24.573Z,1520665464.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:04:24.976Z,1520665464.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:04:25.378Z,1520665465.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:04:25.773Z,1520665465.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:04:26.199Z,1520665466.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:04:26.583Z,1520665466.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:04:26.993Z,1520665466.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:04:27.385Z,1520665467.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:04:27.777Z,1520665467.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:04:28.177Z,1520665468.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:04:28.585Z,1520665468.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:04:28.988Z,1520665468.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:04:29.387Z,1520665469.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:04:29.784Z,1520665469.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:04:30.181Z,1520665470.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:04:30.576Z,1520665470.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:04:30.985Z,1520665470.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:04:31.380Z,1520665471.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:04:31.778Z,1520665471.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:04:32.189Z,1520665472.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:04:32.591Z,1520665472.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:04:32.988Z,1520665472.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:04:33.381Z,1520665473.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:04:33.784Z,1520665473.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:04:34.193Z,1520665474.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:04:34.593Z,1520665474.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:04:34.990Z,1520665474.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:04:35.391Z,1520665475.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:04:35.793Z,1520665475.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:04:36.188Z,1520665476.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:04:36.566Z,1520665476.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:04:36.968Z,1520665476.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:04:37.366Z,1520665477.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:04:37.797Z,1520665477.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:04:38.189Z,1520665478.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:04:38.595Z,1520665478.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:04:38.982Z,1520665478.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:04:39.373Z,1520665479.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:04:39.769Z,1520665479.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:04:40.173Z,1520665480.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:04:40.571Z,1520665480.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:04:40.975Z,1520665480.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:04:41.386Z,1520665481.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:04:41.785Z,1520665481.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:04:42.176Z,1520665482.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:04:42.573Z,1520665482.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:04:42.972Z,1520665482.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:04:43.381Z,1520665483.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:04:43.773Z,1520665483.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:04:44.178Z,1520665484.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:04:44.579Z,1520665484.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:04:44.979Z,1520665484.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:04:48.113Z,1520665488.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:04:48.277Z,1520665488.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:04:48.703Z,1520665488.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:04:49.078Z,1520665489.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:04:49.475Z,1520665489.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:04:49.869Z,1520665489.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:04:50.267Z,1520665490.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:04:50.669Z,1520665490.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:04:51.071Z,1520665491.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:04:51.467Z,1520665491.467 [BPC1](ERROR): Failed to receive battery data
2018-03-10T07:04:51.468Z,1520665491.468 [BPC1] Communications Fault, FailCount= 2
2018-03-10T07:04:51.468Z,1520665491.468 [BPC1](ERROR): Communications Fault
2018-03-10T07:04:51.475Z,1520665491.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:04:51.547Z,1520665491.547 [CBIT](ERROR): Communications Fault in component: BPC1
2018-03-10T07:04:51.870Z,1520665491.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:04:52.262Z,1520665492.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:04:52.664Z,1520665492.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:04:52.752Z,1520665492.752 [CBIT](INFO): Clearing failed state for component BPC1
2018-03-10T07:04:52.752Z,1520665492.752 [BPC1] No Fault, FailCount= 2
2018-03-10T07:04:53.121Z,1520665493.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:04:53.462Z,1520665493.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:04:53.880Z,1520665493.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:04:54.273Z,1520665494.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:04:54.677Z,1520665494.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:04:55.069Z,1520665495.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:04:55.461Z,1520665495.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:04:55.877Z,1520665495.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:04:56.270Z,1520665496.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:04:56.677Z,1520665496.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:04:57.073Z,1520665497.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:04:57.475Z,1520665497.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:04:57.873Z,1520665497.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:04:58.274Z,1520665498.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:04:58.653Z,1520665498.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:04:59.081Z,1520665499.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:04:59.474Z,1520665499.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:04:59.881Z,1520665499.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:05:00.254Z,1520665500.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:05:00.673Z,1520665500.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:05:01.078Z,1520665501.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:05:01.473Z,1520665501.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:05:01.874Z,1520665501.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:05:02.282Z,1520665502.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:05:02.677Z,1520665502.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:05:03.077Z,1520665503.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:05:03.456Z,1520665503.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:05:03.854Z,1520665503.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:05:04.277Z,1520665504.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:05:04.655Z,1520665504.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:05:05.079Z,1520665505.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:05:05.482Z,1520665505.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:05:05.883Z,1520665505.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:05:06.261Z,1520665506.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:05:06.656Z,1520665506.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:05:07.050Z,1520665507.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:05:07.456Z,1520665507.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:05:07.882Z,1520665507.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:05:08.280Z,1520665508.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:05:08.682Z,1520665508.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:05:09.056Z,1520665509.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:05:09.454Z,1520665509.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:05:09.858Z,1520665509.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:05:10.253Z,1520665510.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:05:10.656Z,1520665510.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:05:11.082Z,1520665511.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:05:11.479Z,1520665511.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:05:11.882Z,1520665511.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:05:12.256Z,1520665512.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:05:12.659Z,1520665512.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:05:13.057Z,1520665513.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:05:13.453Z,1520665513.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:05:13.880Z,1520665513.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:05:14.282Z,1520665514.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:05:14.678Z,1520665514.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:05:15.053Z,1520665515.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:05:15.457Z,1520665515.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:05:15.859Z,1520665515.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:05:16.258Z,1520665516.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:05:16.655Z,1520665516.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:05:17.081Z,1520665517.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:05:17.476Z,1520665517.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:05:17.874Z,1520665517.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:05:18.255Z,1520665518.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:05:18.661Z,1520665518.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:05:19.059Z,1520665519.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:05:19.465Z,1520665519.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:05:19.893Z,1520665519.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:05:20.272Z,1520665520.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:05:20.684Z,1520665520.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:05:21.061Z,1520665521.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:05:21.461Z,1520665521.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:05:21.864Z,1520665521.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:05:22.266Z,1520665522.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:05:22.669Z,1520665522.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:05:23.063Z,1520665523.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:05:23.462Z,1520665523.462 [BPC1](FAULT): Failed to initialize
2018-03-10T07:05:23.462Z,1520665523.462 [BPC1] Communications Fault, FailCount= 3
2018-03-10T07:05:23.462Z,1520665523.462 [BPC1](ERROR): Communications Fault
2018-03-10T07:05:23.471Z,1520665523.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:05:23.584Z,1520665523.584 [CBIT](ERROR): Communications Fault in component: BPC1
2018-03-10T07:05:23.870Z,1520665523.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:05:24.255Z,1520665524.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:05:24.665Z,1520665524.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:05:24.747Z,1520665524.747 [CBIT](INFO): Clearing failed state for component BPC1
2018-03-10T07:05:24.747Z,1520665524.747 [BPC1] No Fault, FailCount= 3
2018-03-10T07:05:25.117Z,1520665525.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:05:25.462Z,1520665525.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:05:25.866Z,1520665525.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:05:25.947Z,1520665525.947 [CBIT](DEBUG): EFC running - data check-sum false
2018-03-10T07:05:26.267Z,1520665526.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:05:26.671Z,1520665526.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:05:27.060Z,1520665527.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:05:27.463Z,1520665527.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:05:27.857Z,1520665527.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:05:28.264Z,1520665528.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:05:28.663Z,1520665528.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:05:29.073Z,1520665529.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:05:29.470Z,1520665529.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:05:29.883Z,1520665529.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:05:30.269Z,1520665530.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:05:30.662Z,1520665530.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:05:31.065Z,1520665531.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:05:31.465Z,1520665531.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:05:31.903Z,1520665531.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:05:32.275Z,1520665532.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:05:32.670Z,1520665532.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:05:33.069Z,1520665533.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:05:33.470Z,1520665533.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:05:33.869Z,1520665533.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:05:34.260Z,1520665534.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:05:34.673Z,1520665534.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:05:35.077Z,1520665535.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:05:35.474Z,1520665535.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:05:35.875Z,1520665535.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:05:36.259Z,1520665536.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:05:36.669Z,1520665536.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:05:37.065Z,1520665537.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:05:37.459Z,1520665537.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:05:37.876Z,1520665537.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:05:38.277Z,1520665538.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:05:38.671Z,1520665538.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:05:39.058Z,1520665539.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:05:39.469Z,1520665539.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:05:39.858Z,1520665539.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:05:40.263Z,1520665540.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:05:40.662Z,1520665540.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:05:41.070Z,1520665541.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:05:41.470Z,1520665541.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:05:41.874Z,1520665541.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:05:42.258Z,1520665542.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:05:42.665Z,1520665542.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:05:43.065Z,1520665543.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:05:43.467Z,1520665543.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:05:43.870Z,1520665543.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:05:44.281Z,1520665544.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:05:44.677Z,1520665544.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:05:45.064Z,1520665545.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:05:49.398Z,1520665549.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:05:49.550Z,1520665549.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:05:49.986Z,1520665549.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:05:50.394Z,1520665550.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:05:50.779Z,1520665550.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:05:51.185Z,1520665551.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:05:51.558Z,1520665551.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:05:51.965Z,1520665551.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:05:52.357Z,1520665552.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:05:52.788Z,1520665552.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:05:53.186Z,1520665553.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:05:53.582Z,1520665553.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:05:53.957Z,1520665553.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:05:54.357Z,1520665554.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:05:54.758Z,1520665554.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:05:55.158Z,1520665555.158 [BPC1](FAULT): Failed to initialize
2018-03-10T07:05:55.159Z,1520665555.159 [BPC1] Communications Fault, FailCount= 4
2018-03-10T07:05:55.159Z,1520665555.159 [BPC1](ERROR): Communications Fault
2018-03-10T07:05:55.166Z,1520665555.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:05:55.251Z,1520665555.251 [CBIT](ERROR): Communications Fault in component: BPC1
2018-03-10T07:05:55.566Z,1520665555.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:05:55.970Z,1520665555.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:05:56.378Z,1520665556.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:05:56.475Z,1520665556.475 [CBIT](INFO): Clearing failed state for component BPC1
2018-03-10T07:05:56.475Z,1520665556.475 [BPC1] No Fault, FailCount= 4
2018-03-10T07:05:56.838Z,1520665556.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:05:57.165Z,1520665557.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:05:57.575Z,1520665557.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:05:57.977Z,1520665557.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:05:58.368Z,1520665558.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:05:58.777Z,1520665558.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:05:59.169Z,1520665559.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:05:59.571Z,1520665559.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:05:59.969Z,1520665559.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:06:00.372Z,1520665560.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:06:00.765Z,1520665560.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:06:01.175Z,1520665561.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:06:01.565Z,1520665561.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:06:01.967Z,1520665561.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:06:02.372Z,1520665562.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:06:02.875Z,1520665562.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:06:03.157Z,1520665563.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:06:03.558Z,1520665563.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:06:03.962Z,1520665563.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:06:04.361Z,1520665564.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:06:04.787Z,1520665564.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:06:05.187Z,1520665565.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:06:05.586Z,1520665565.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:06:05.965Z,1520665565.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:06:06.385Z,1520665566.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:06:06.761Z,1520665566.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:06:07.167Z,1520665567.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:06:07.569Z,1520665567.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:06:07.981Z,1520665567.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:06:08.370Z,1520665568.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:06:08.820Z,1520665568.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:06:09.176Z,1520665569.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:06:09.579Z,1520665569.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:06:09.975Z,1520665569.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:06:10.373Z,1520665570.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:06:10.784Z,1520665570.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:06:11.187Z,1520665571.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:06:11.589Z,1520665571.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:06:11.958Z,1520665571.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:06:12.357Z,1520665572.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:06:12.757Z,1520665572.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:06:13.159Z,1520665573.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:06:13.557Z,1520665573.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:06:13.984Z,1520665573.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:06:14.384Z,1520665574.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:06:14.787Z,1520665574.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:06:15.161Z,1520665575.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:06:15.561Z,1520665575.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:06:15.958Z,1520665575.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:06:16.357Z,1520665576.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:06:16.785Z,1520665576.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:06:17.190Z,1520665577.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:06:17.591Z,1520665577.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:06:17.961Z,1520665577.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:06:18.357Z,1520665578.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:06:18.765Z,1520665578.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:06:19.169Z,1520665579.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:06:19.565Z,1520665579.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:06:19.991Z,1520665579.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:06:20.392Z,1520665580.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:06:20.768Z,1520665580.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:06:21.191Z,1520665581.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:06:21.563Z,1520665581.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:06:21.962Z,1520665581.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:06:22.361Z,1520665582.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:06:22.793Z,1520665582.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:06:23.190Z,1520665583.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:06:23.591Z,1520665583.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:06:23.969Z,1520665583.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:06:24.361Z,1520665584.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:06:24.761Z,1520665584.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:06:25.162Z,1520665585.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:06:25.562Z,1520665585.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:06:25.991Z,1520665585.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:06:26.391Z,1520665586.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:06:26.789Z,1520665586.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:06:27.154Z,1520665587.154 [BPC1](FAULT): Failed to initialize
2018-03-10T07:06:27.154Z,1520665587.154 [BPC1] Communications Fault, FailCount= 5
2018-03-10T07:06:27.154Z,1520665587.154 [BPC1](ERROR): Communications Fault
2018-03-10T07:06:27.162Z,1520665587.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:06:27.255Z,1520665587.255 [CBIT](ERROR): Communications Fault in component: BPC1
2018-03-10T07:06:27.566Z,1520665587.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:06:27.969Z,1520665587.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:06:28.362Z,1520665588.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:06:28.443Z,1520665588.443 [CBIT](INFO): Clearing failed state for component BPC1
2018-03-10T07:06:28.443Z,1520665588.443 [BPC1] No Fault, FailCount= 5
2018-03-10T07:06:28.837Z,1520665588.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:06:29.191Z,1520665589.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:06:29.574Z,1520665589.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:06:29.969Z,1520665589.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:06:30.369Z,1520665590.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:06:30.773Z,1520665590.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:06:31.167Z,1520665591.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:06:31.561Z,1520665591.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:06:31.926Z,1520665591.926 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-03-10T07:06:31.926Z,1520665591.926 [NAL9602] Data Fault, FailCount= 1
2018-03-10T07:06:31.926Z,1520665591.926 [NAL9602](ERROR): Data Fault
2018-03-10T07:06:31.980Z,1520665591.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:06:32.059Z,1520665592.059 [CBIT](ERROR): Data Fault in component: NAL9602
2018-03-10T07:06:32.333Z,1520665592.333 [NAL9602](INFO): Powering down
2018-03-10T07:06:32.369Z,1520665592.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:06:32.760Z,1520665592.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:06:33.173Z,1520665593.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:06:33.271Z,1520665593.271 [CBIT](INFO): Clearing failed state for component NAL9602
2018-03-10T07:06:33.271Z,1520665593.271 [NAL9602] No Fault, FailCount= 1
2018-03-10T07:06:33.565Z,1520665593.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:06:33.964Z,1520665593.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:06:34.364Z,1520665594.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:06:34.766Z,1520665594.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:06:35.165Z,1520665595.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:06:35.565Z,1520665595.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:06:35.973Z,1520665595.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:06:36.361Z,1520665596.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:06:36.765Z,1520665596.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:06:37.166Z,1520665597.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:06:37.560Z,1520665597.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:06:37.965Z,1520665597.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:06:38.365Z,1520665598.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:06:38.765Z,1520665598.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:06:39.165Z,1520665599.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:06:39.565Z,1520665599.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:06:39.962Z,1520665599.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:06:40.365Z,1520665600.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:06:40.768Z,1520665600.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:06:41.167Z,1520665601.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:06:41.573Z,1520665601.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:06:41.968Z,1520665601.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:06:42.367Z,1520665602.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:06:42.767Z,1520665602.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:06:43.169Z,1520665603.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:06:43.562Z,1520665603.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:06:43.967Z,1520665603.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:06:44.369Z,1520665604.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:06:44.765Z,1520665604.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:06:45.166Z,1520665605.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:06:48.272Z,1520665608.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:06:48.413Z,1520665608.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:06:48.812Z,1520665608.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:06:49.208Z,1520665609.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:06:49.607Z,1520665609.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:06:50.008Z,1520665610.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:06:50.405Z,1520665610.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:06:50.807Z,1520665610.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:06:51.207Z,1520665611.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:06:51.607Z,1520665611.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:06:52.004Z,1520665612.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:06:52.405Z,1520665612.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:06:52.803Z,1520665612.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:06:53.202Z,1520665613.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:06:53.605Z,1520665613.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:06:54.001Z,1520665614.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:06:54.405Z,1520665614.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:06:54.806Z,1520665614.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:06:55.207Z,1520665615.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:06:55.609Z,1520665615.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:06:56.006Z,1520665616.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:06:56.409Z,1520665616.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:06:56.798Z,1520665616.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:06:57.210Z,1520665617.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:06:57.589Z,1520665617.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:06:57.992Z,1520665617.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:06:58.416Z,1520665618.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:06:58.793Z,1520665618.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:06:59.187Z,1520665619.187 [BPC1](FAULT): Failed to initialize
2018-03-10T07:06:59.187Z,1520665619.187 [BPC1] Communications Fault, FailCount= 6
2018-03-10T07:06:59.187Z,1520665619.187 [BPC1](ERROR): Communications Fault
2018-03-10T07:06:59.194Z,1520665619.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:06:59.307Z,1520665619.307 [CBIT](ERROR): Communications Fault in component: BPC1
2018-03-10T07:06:59.597Z,1520665619.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:06:59.993Z,1520665619.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:07:00.394Z,1520665620.394 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:07:00.394Z,1520665620.394 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 37
2018-03-10T07:07:00.394Z,1520665620.394 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-03-10T07:07:00.396Z,1520665620.396 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:07:00.396Z,1520665620.396 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 37
2018-03-10T07:07:00.396Z,1520665620.396 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-03-10T07:07:00.398Z,1520665620.398 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:07:00.398Z,1520665620.398 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 37
2018-03-10T07:07:00.398Z,1520665620.398 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-10T07:07:00.488Z,1520665620.488 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-03-10T07:07:00.488Z,1520665620.488 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-03-10T07:07:00.488Z,1520665620.488 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-10T07:07:00.488Z,1520665620.488 [CBIT](INFO): Clearing failed state for component BPC1
2018-03-10T07:07:00.488Z,1520665620.488 [BPC1] No Fault, FailCount= 6
2018-03-10T07:07:00.951Z,1520665620.951 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-03-10T07:07:00.951Z,1520665620.951 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 37
2018-03-10T07:07:00.952Z,1520665620.952 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-03-10T07:07:00.952Z,1520665620.952 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 37
2018-03-10T07:07:00.952Z,1520665620.952 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-10T07:07:00.952Z,1520665620.952 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 37
2018-03-10T07:07:01.196Z,1520665621.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-03-10T07:07:01.196Z,1520665621.196 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-03-10T07:07:01.197Z,1520665621.197 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-03-10T07:07:01.197Z,1520665621.197 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-03-10T07:07:01.197Z,1520665621.197 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-03-10T07:07:01.198Z,1520665621.198 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-03-10T07:07:01.198Z,1520665621.198 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-10T07:07:01.198Z,1520665621.198 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-10T07:07:01.199Z,1520665621.199 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-10T07:07:01.597Z,1520665621.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-03-10T07:07:01.598Z,1520665621.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:07:02.001Z,1520665622.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-03-10T07:07:02.002Z,1520665622.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:07:02.360Z,1520665622.360 [NAL9602](INFO): Powering up NAL9602
2018-03-10T07:07:02.405Z,1520665622.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-03-10T07:07:02.405Z,1520665622.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:07:02.799Z,1520665622.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-03-10T07:07:02.800Z,1520665622.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:07:03.200Z,1520665623.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-03-10T07:07:03.201Z,1520665623.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:07:03.597Z,1520665623.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-03-10T07:07:03.598Z,1520665623.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:07:03.999Z,1520665623.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-03-10T07:07:04.000Z,1520665624.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:07:04.401Z,1520665624.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-03-10T07:07:04.401Z,1520665624.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:07:04.799Z,1520665624.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-03-10T07:07:04.800Z,1520665624.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:07:05.200Z,1520665625.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-03-10T07:07:05.201Z,1520665625.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:07:05.601Z,1520665625.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-03-10T07:07:05.601Z,1520665625.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:07:06.004Z,1520665626.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-03-10T07:07:06.005Z,1520665626.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:07:06.437Z,1520665626.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-03-10T07:07:06.438Z,1520665626.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:07:06.802Z,1520665626.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-03-10T07:07:06.803Z,1520665626.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:07:07.204Z,1520665627.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-03-10T07:07:07.205Z,1520665627.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:07:07.604Z,1520665627.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-03-10T07:07:07.604Z,1520665627.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:07:08.002Z,1520665628.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-03-10T07:07:08.003Z,1520665628.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:07:08.403Z,1520665628.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-03-10T07:07:08.404Z,1520665628.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:07:08.802Z,1520665628.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-03-10T07:07:08.803Z,1520665628.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:07:09.202Z,1520665629.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-03-10T07:07:09.203Z,1520665629.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:07:09.597Z,1520665629.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-03-10T07:07:09.598Z,1520665629.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:07:10.030Z,1520665630.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-03-10T07:07:10.047Z,1520665630.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:07:10.402Z,1520665630.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-03-10T07:07:10.403Z,1520665630.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:07:10.797Z,1520665630.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-03-10T07:07:10.798Z,1520665630.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:07:11.214Z,1520665631.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-03-10T07:07:11.215Z,1520665631.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:07:11.602Z,1520665631.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-03-10T07:07:11.603Z,1520665631.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:07:12.004Z,1520665632.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-03-10T07:07:12.005Z,1520665632.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:07:12.402Z,1520665632.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-03-10T07:07:12.403Z,1520665632.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:07:12.807Z,1520665632.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-03-10T07:07:12.808Z,1520665632.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:07:13.165Z,1520665633.165 [NAL9602](INFO): NAL9602 initialized
2018-03-10T07:07:13.209Z,1520665633.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-03-10T07:07:13.210Z,1520665633.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:07:13.602Z,1520665633.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-03-10T07:07:13.603Z,1520665633.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:07:14.008Z,1520665634.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-03-10T07:07:14.009Z,1520665634.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:07:14.411Z,1520665634.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-03-10T07:07:14.412Z,1520665634.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:07:14.811Z,1520665634.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-03-10T07:07:14.812Z,1520665634.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:07:15.202Z,1520665635.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-03-10T07:07:15.203Z,1520665635.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:07:15.608Z,1520665635.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-03-10T07:07:15.609Z,1520665635.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:07:16.007Z,1520665636.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-03-10T07:07:16.008Z,1520665636.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:07:16.407Z,1520665636.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-03-10T07:07:16.408Z,1520665636.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:07:16.816Z,1520665636.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-03-10T07:07:16.817Z,1520665636.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:07:17.203Z,1520665637.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-03-10T07:07:17.204Z,1520665637.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:07:17.611Z,1520665637.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-03-10T07:07:17.612Z,1520665637.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:07:18.043Z,1520665638.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-03-10T07:07:18.044Z,1520665638.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:07:18.420Z,1520665638.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-03-10T07:07:18.421Z,1520665638.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:07:18.845Z,1520665638.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.5 s old, using for 20.0 s.
2018-03-10T07:07:18.845Z,1520665638.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:07:19.205Z,1520665639.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2018-03-10T07:07:19.206Z,1520665639.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:07:19.605Z,1520665639.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2018-03-10T07:07:19.606Z,1520665639.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:07:20.020Z,1520665640.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2018-03-10T07:07:20.021Z,1520665640.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:07:20.418Z,1520665640.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:07:20.825Z,1520665640.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:07:21.205Z,1520665641.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:07:21.602Z,1520665641.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:07:22.018Z,1520665642.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:07:22.416Z,1520665642.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:07:22.812Z,1520665642.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:07:23.207Z,1520665643.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:07:23.609Z,1520665643.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:07:24.012Z,1520665644.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:07:24.419Z,1520665644.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:07:24.816Z,1520665644.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:07:25.210Z,1520665645.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:07:25.608Z,1520665645.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:07:26.017Z,1520665646.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:07:26.421Z,1520665646.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:07:26.816Z,1520665646.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:07:27.210Z,1520665647.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:07:27.620Z,1520665647.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:07:28.014Z,1520665648.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:07:28.440Z,1520665648.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:07:28.833Z,1520665648.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:07:29.210Z,1520665649.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:07:29.615Z,1520665649.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:07:30.022Z,1520665650.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:07:30.422Z,1520665650.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:07:30.824Z,1520665650.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:07:31.221Z,1520665651.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:07:31.593Z,1520665651.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:07:32.028Z,1520665652.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:07:32.430Z,1520665652.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:07:32.806Z,1520665652.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:07:33.199Z,1520665653.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:07:33.598Z,1520665653.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:07:34.027Z,1520665654.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:07:34.425Z,1520665654.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:07:34.807Z,1520665654.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:07:35.203Z,1520665655.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:07:35.604Z,1520665655.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:07:36.004Z,1520665656.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:07:36.428Z,1520665656.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:07:36.807Z,1520665656.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:07:37.202Z,1520665657.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:07:37.601Z,1520665657.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:07:38.028Z,1520665658.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:07:38.408Z,1520665658.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:07:38.827Z,1520665658.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:07:39.203Z,1520665659.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:07:39.610Z,1520665659.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:07:40.037Z,1520665660.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:07:40.435Z,1520665660.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:07:40.808Z,1520665660.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:07:41.202Z,1520665661.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:07:41.602Z,1520665661.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:07:42.013Z,1520665662.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:07:42.431Z,1520665662.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:07:42.807Z,1520665662.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:07:43.209Z,1520665663.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:07:43.617Z,1520665663.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:07:44.007Z,1520665664.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:07:44.407Z,1520665664.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:07:44.807Z,1520665664.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:07:44.810Z,1520665664.810 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-03-10T07:02:44.7Z
2018-03-10T07:07:44.811Z,1520665664.811 [Default:CheckIn:Read_GPS] Stopped
2018-03-10T07:07:44.811Z,1520665664.811 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-03-10T07:07:45.249Z,1520665665.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:07:49.762Z,1520665669.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:07:49.883Z,1520665669.883 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20180310T051512/Courier0044.lzma
2018-03-10T07:07:49.992Z,1520665669.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:07:50.356Z,1520665670.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:07:50.674Z,1520665670.674 [DataOverHttps](INFO): Moved sent file to Logs/20180310T051512/Courier0044.lzma.bak
2018-03-10T07:07:50.674Z,1520665670.674 [DataOverHttps](INFO): SBD MOMSN=8002573
2018-03-10T07:07:50.751Z,1520665670.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:07:51.410Z,1520665671.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:07:51.561Z,1520665671.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:07:54.757Z,1520665674.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:07:54.949Z,1520665674.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:07:55.307Z,1520665675.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:07:55.703Z,1520665675.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:07:56.144Z,1520665676.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:07:56.501Z,1520665676.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:07:56.901Z,1520665676.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:07:57.307Z,1520665677.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:07:57.731Z,1520665677.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:07:58.109Z,1520665678.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:08:01.231Z,1520665681.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:08:01.392Z,1520665681.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:08:01.751Z,1520665681.751 [DataOverHttps](INFO): Sending 173 bytes from file Logs/20180310T051512/Express0045.lzma
2018-03-10T07:08:01.840Z,1520665681.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:08:02.189Z,1520665682.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:08:02.537Z,1520665682.537 [DataOverHttps](INFO): Moved sent file to Logs/20180310T051512/Express0045.lzma.bak
2018-03-10T07:08:02.537Z,1520665682.537 [DataOverHttps](INFO): SBD MOMSN=8002575
2018-03-10T07:08:02.609Z,1520665682.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:08:03.283Z,1520665683.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:08:03.286Z,1520665683.286 [Default:CheckIn:Read_Iridium] Stopped
2018-03-10T07:08:03.286Z,1520665683.286 [Default:CheckIn:C.Wait] Running Loop=1
2018-03-10T07:08:03.286Z,1520665683.286 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-03-10T07:08:03.445Z,1520665683.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:08:06.586Z,1520665686.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:08:06.742Z,1520665686.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:08:07.136Z,1520665687.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:08:07.541Z,1520665687.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:08:07.921Z,1520665687.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:08:08.357Z,1520665688.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:08:08.750Z,1520665688.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:08:09.147Z,1520665689.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:08:09.548Z,1520665689.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:08:09.949Z,1520665689.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:08:10.329Z,1520665690.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:08:10.722Z,1520665690.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:08:11.122Z,1520665691.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:08:11.522Z,1520665691.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:08:11.921Z,1520665691.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:08:12.327Z,1520665692.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:08:12.747Z,1520665692.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:08:13.127Z,1520665693.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:08:13.521Z,1520665693.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:08:13.925Z,1520665693.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:08:14.349Z,1520665694.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:08:14.722Z,1520665694.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:08:15.154Z,1520665695.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:08:15.526Z,1520665695.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:08:15.927Z,1520665695.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:08:16.318Z,1520665696.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:08:16.721Z,1520665696.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:08:17.123Z,1520665697.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:08:17.522Z,1520665697.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:08:17.922Z,1520665697.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:08:18.327Z,1520665698.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:08:18.721Z,1520665698.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:08:19.127Z,1520665699.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:08:19.521Z,1520665699.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:08:19.922Z,1520665699.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:08:20.329Z,1520665700.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:08:20.730Z,1520665700.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:08:21.153Z,1520665701.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:08:21.527Z,1520665701.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:08:21.927Z,1520665701.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:08:22.324Z,1520665702.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:08:22.722Z,1520665702.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:08:23.122Z,1520665703.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:08:23.529Z,1520665703.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:08:23.922Z,1520665703.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:08:24.327Z,1520665704.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:08:24.731Z,1520665704.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:08:25.133Z,1520665705.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:08:25.541Z,1520665705.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:08:25.925Z,1520665705.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:08:26.323Z,1520665706.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:08:26.725Z,1520665706.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:08:27.130Z,1520665707.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:08:27.529Z,1520665707.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:08:27.930Z,1520665707.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:08:28.329Z,1520665708.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:08:28.725Z,1520665708.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:08:29.125Z,1520665709.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:08:29.525Z,1520665709.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:08:29.929Z,1520665709.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:08:30.359Z,1520665710.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:08:30.741Z,1520665710.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:08:31.130Z,1520665711.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:08:31.529Z,1520665711.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:08:31.935Z,1520665711.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:08:32.315Z,1520665712.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:08:32.725Z,1520665712.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:08:33.145Z,1520665713.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:08:33.526Z,1520665713.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:08:33.937Z,1520665713.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:08:34.327Z,1520665714.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:08:34.722Z,1520665714.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:08:35.124Z,1520665715.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:08:35.528Z,1520665715.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:08:35.923Z,1520665715.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:08:36.338Z,1520665716.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:08:36.762Z,1520665716.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:08:37.134Z,1520665717.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:08:37.525Z,1520665717.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:08:37.926Z,1520665717.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:08:38.326Z,1520665718.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:08:38.730Z,1520665718.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:08:39.168Z,1520665719.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:08:39.534Z,1520665719.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:08:39.935Z,1520665719.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:08:40.329Z,1520665720.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:08:40.724Z,1520665720.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:08:41.125Z,1520665721.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:08:41.529Z,1520665721.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:08:41.932Z,1520665721.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:08:42.337Z,1520665722.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:08:42.738Z,1520665722.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:08:43.134Z,1520665723.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:08:43.528Z,1520665723.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:08:43.929Z,1520665723.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:08:44.325Z,1520665724.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:08:44.725Z,1520665724.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:08:45.133Z,1520665725.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:08:45.533Z,1520665725.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:08:45.935Z,1520665725.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:08:46.319Z,1520665726.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:08:46.723Z,1520665726.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:08:47.137Z,1520665727.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:08:47.541Z,1520665727.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:08:47.924Z,1520665727.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:08:48.335Z,1520665728.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:08:48.737Z,1520665728.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:08:49.136Z,1520665729.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:08:49.528Z,1520665729.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:08:49.922Z,1520665729.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:08:50.331Z,1520665730.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:08:50.736Z,1520665730.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:08:51.135Z,1520665731.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:08:51.541Z,1520665731.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:08:51.949Z,1520665731.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:08:52.313Z,1520665732.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:08:52.717Z,1520665732.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:08:53.117Z,1520665733.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:08:53.537Z,1520665733.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:08:53.918Z,1520665733.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:08:54.343Z,1520665734.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:08:54.743Z,1520665734.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:08:55.142Z,1520665735.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:08:55.514Z,1520665735.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:08:55.917Z,1520665735.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:08:56.315Z,1520665736.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:08:56.717Z,1520665736.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:08:57.141Z,1520665737.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:08:57.538Z,1520665737.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:08:57.953Z,1520665737.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:08:58.356Z,1520665738.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:08:58.718Z,1520665738.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:08:59.117Z,1520665739.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:08:59.521Z,1520665739.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:08:59.917Z,1520665739.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:09:00.347Z,1520665740.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:09:00.743Z,1520665740.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:09:01.146Z,1520665741.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:09:01.525Z,1520665741.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:09:01.947Z,1520665741.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:09:02.325Z,1520665742.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:09:02.717Z,1520665742.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:09:03.147Z,1520665743.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:09:03.547Z,1520665743.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:09:03.950Z,1520665743.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:09:07.026Z,1520665747.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:09:07.205Z,1520665747.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:09:07.609Z,1520665747.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:09:08.012Z,1520665748.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:09:08.408Z,1520665748.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:09:08.805Z,1520665748.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:09:09.207Z,1520665749.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:09:09.617Z,1520665749.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:09:10.029Z,1520665750.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:09:10.409Z,1520665750.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:09:10.819Z,1520665750.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:09:11.186Z,1520665751.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:09:11.586Z,1520665751.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:09:12.009Z,1520665752.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:09:12.390Z,1520665752.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:09:12.821Z,1520665752.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:09:13.233Z,1520665753.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:09:13.617Z,1520665753.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:09:13.986Z,1520665753.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:09:14.393Z,1520665754.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:09:14.786Z,1520665754.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:09:15.189Z,1520665755.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:09:15.586Z,1520665755.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:09:16.015Z,1520665756.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:09:16.414Z,1520665756.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:09:16.811Z,1520665756.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:09:17.184Z,1520665757.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:09:17.586Z,1520665757.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:09:17.991Z,1520665757.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:09:18.390Z,1520665758.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:09:18.811Z,1520665758.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:09:19.213Z,1520665759.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:09:19.614Z,1520665759.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:09:19.994Z,1520665759.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:09:20.414Z,1520665760.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:09:20.786Z,1520665760.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:09:21.194Z,1520665761.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:09:21.618Z,1520665761.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:09:22.014Z,1520665762.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:09:22.427Z,1520665762.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:09:22.806Z,1520665762.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:09:23.194Z,1520665763.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:09:23.593Z,1520665763.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:09:23.996Z,1520665763.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:09:24.400Z,1520665764.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:09:24.826Z,1520665764.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:09:25.200Z,1520665765.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:09:25.599Z,1520665765.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:09:26.005Z,1520665766.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:09:26.394Z,1520665766.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:09:26.795Z,1520665766.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:09:27.192Z,1520665767.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:09:27.594Z,1520665767.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:09:27.999Z,1520665767.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:09:28.397Z,1520665768.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:09:28.799Z,1520665768.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:09:29.195Z,1520665769.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:09:29.596Z,1520665769.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:09:29.994Z,1520665769.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:09:30.394Z,1520665770.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:09:30.800Z,1520665770.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:09:31.199Z,1520665771.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:09:31.599Z,1520665771.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:09:31.993Z,1520665771.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:09:32.394Z,1520665772.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:09:32.800Z,1520665772.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:09:33.205Z,1520665773.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:09:33.594Z,1520665773.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:09:33.999Z,1520665773.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:09:34.404Z,1520665774.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:09:34.830Z,1520665774.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:09:35.200Z,1520665775.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:09:35.594Z,1520665775.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:09:36.001Z,1520665776.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:09:36.413Z,1520665776.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:09:36.807Z,1520665776.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:09:37.207Z,1520665777.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:09:37.607Z,1520665777.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:09:38.001Z,1520665778.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:09:38.401Z,1520665778.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:09:38.796Z,1520665778.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:09:39.201Z,1520665779.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:09:39.605Z,1520665779.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:09:40.007Z,1520665780.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:09:40.407Z,1520665780.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:09:40.807Z,1520665780.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:09:41.200Z,1520665781.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:09:41.601Z,1520665781.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:09:41.996Z,1520665781.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:09:42.398Z,1520665782.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:09:42.807Z,1520665782.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:09:43.207Z,1520665783.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:09:43.613Z,1520665783.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:09:44.001Z,1520665784.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:09:44.401Z,1520665784.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:09:44.796Z,1520665784.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:09:45.239Z,1520665785.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:09:45.608Z,1520665785.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:09:46.021Z,1520665786.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:09:46.425Z,1520665786.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:09:46.816Z,1520665786.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:09:47.217Z,1520665787.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:09:47.637Z,1520665787.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:09:48.024Z,1520665788.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:09:48.425Z,1520665788.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:09:48.841Z,1520665788.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:09:49.201Z,1520665789.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:09:49.599Z,1520665789.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:09:50.011Z,1520665790.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:09:50.393Z,1520665790.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:09:50.800Z,1520665790.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:09:51.195Z,1520665791.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:09:51.593Z,1520665791.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:09:52.027Z,1520665792.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:09:52.425Z,1520665792.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:09:52.799Z,1520665792.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:09:53.195Z,1520665793.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:09:53.593Z,1520665793.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:09:54.000Z,1520665794.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:09:54.403Z,1520665794.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:09:54.799Z,1520665794.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:09:55.223Z,1520665795.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:09:55.599Z,1520665795.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:09:55.997Z,1520665795.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:09:56.401Z,1520665796.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:09:56.799Z,1520665796.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:09:57.196Z,1520665797.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:09:57.595Z,1520665797.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:09:58.003Z,1520665798.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:09:58.400Z,1520665798.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:09:58.806Z,1520665798.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:09:59.213Z,1520665799.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:09:59.597Z,1520665799.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:09:59.996Z,1520665799.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:10:00.397Z,1520665800.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:10:00.813Z,1520665800.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:10:01.208Z,1520665801.208 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:10:01.208Z,1520665801.208 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 38
2018-03-10T07:10:01.208Z,1520665801.208 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-03-10T07:10:01.210Z,1520665801.210 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:10:01.210Z,1520665801.210 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 38
2018-03-10T07:10:01.210Z,1520665801.210 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-03-10T07:10:01.212Z,1520665801.212 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:10:01.212Z,1520665801.212 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 38
2018-03-10T07:10:01.212Z,1520665801.212 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-10T07:10:01.303Z,1520665801.303 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-03-10T07:10:01.303Z,1520665801.303 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-03-10T07:10:01.303Z,1520665801.303 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-10T07:10:01.711Z,1520665801.711 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-03-10T07:10:01.711Z,1520665801.711 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 38
2018-03-10T07:10:01.711Z,1520665801.711 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-03-10T07:10:01.711Z,1520665801.711 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 38
2018-03-10T07:10:01.712Z,1520665801.712 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-10T07:10:01.712Z,1520665801.712 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 38
2018-03-10T07:10:01.994Z,1520665801.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-03-10T07:10:01.994Z,1520665801.994 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-03-10T07:10:01.995Z,1520665801.995 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-03-10T07:10:01.995Z,1520665801.995 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-03-10T07:10:01.996Z,1520665801.996 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-03-10T07:10:01.996Z,1520665801.996 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-03-10T07:10:01.996Z,1520665801.996 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-10T07:10:01.997Z,1520665801.997 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-10T07:10:01.997Z,1520665801.997 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-10T07:10:02.404Z,1520665802.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-03-10T07:10:02.405Z,1520665802.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:10:02.807Z,1520665802.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-03-10T07:10:02.808Z,1520665802.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:10:03.183Z,1520665803.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-03-10T07:10:03.184Z,1520665803.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:10:03.588Z,1520665803.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-03-10T07:10:03.589Z,1520665803.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:10:04.013Z,1520665804.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-03-10T07:10:04.014Z,1520665804.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:10:07.276Z,1520665807.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.1 s old, using for 20.0 s.
2018-03-10T07:10:07.277Z,1520665807.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:10:07.437Z,1520665807.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.2 s old, using for 20.0 s.
2018-03-10T07:10:07.438Z,1520665807.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:10:07.825Z,1520665807.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.6 s old, using for 20.0 s.
2018-03-10T07:10:07.826Z,1520665807.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:10:08.254Z,1520665808.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.0 s old, using for 20.0 s.
2018-03-10T07:10:08.255Z,1520665808.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:10:08.631Z,1520665808.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.4 s old, using for 20.0 s.
2018-03-10T07:10:08.633Z,1520665808.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:10:09.035Z,1520665809.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.8 s old, using for 20.0 s.
2018-03-10T07:10:09.036Z,1520665809.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:10:09.440Z,1520665809.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.2 s old, using for 20.0 s.
2018-03-10T07:10:09.441Z,1520665809.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:10:09.864Z,1520665809.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.7 s old, using for 20.0 s.
2018-03-10T07:10:09.865Z,1520665809.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:10:10.240Z,1520665810.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.0 s old, using for 20.0 s.
2018-03-10T07:10:10.241Z,1520665810.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:10:10.628Z,1520665810.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.4 s old, using for 20.0 s.
2018-03-10T07:10:10.629Z,1520665810.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:10:11.023Z,1520665811.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.8 s old, using for 20.0 s.
2018-03-10T07:10:11.024Z,1520665811.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:10:11.464Z,1520665811.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.3 s old, using for 20.0 s.
2018-03-10T07:10:11.465Z,1520665811.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:10:11.856Z,1520665811.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.6 s old, using for 20.0 s.
2018-03-10T07:10:11.857Z,1520665811.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:10:12.235Z,1520665812.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.0 s old, using for 20.0 s.
2018-03-10T07:10:12.236Z,1520665812.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:10:12.633Z,1520665812.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.4 s old, using for 20.0 s.
2018-03-10T07:10:12.634Z,1520665812.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:10:13.054Z,1520665813.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.8 s old, using for 20.0 s.
2018-03-10T07:10:13.055Z,1520665813.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:10:13.419Z,1520665813.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.2 s old, using for 20.0 s.
2018-03-10T07:10:13.420Z,1520665813.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:10:13.828Z,1520665813.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.6 s old, using for 20.0 s.
2018-03-10T07:10:13.828Z,1520665813.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:10:14.241Z,1520665814.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.0 s old, using for 20.0 s.
2018-03-10T07:10:14.242Z,1520665814.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:10:14.649Z,1520665814.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.4 s old, using for 20.0 s.
2018-03-10T07:10:14.650Z,1520665814.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:10:15.047Z,1520665815.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.8 s old, using for 20.0 s.
2018-03-10T07:10:15.048Z,1520665815.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:10:15.418Z,1520665815.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.2 s old, using for 20.0 s.
2018-03-10T07:10:15.420Z,1520665815.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:10:15.821Z,1520665815.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.6 s old, using for 20.0 s.
2018-03-10T07:10:15.822Z,1520665815.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:10:16.220Z,1520665816.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.0 s old, using for 20.0 s.
2018-03-10T07:10:16.221Z,1520665816.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:10:16.617Z,1520665816.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.4 s old, using for 20.0 s.
2018-03-10T07:10:16.618Z,1520665816.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:10:17.028Z,1520665817.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.8 s old, using for 20.0 s.
2018-03-10T07:10:17.029Z,1520665817.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:10:17.447Z,1520665817.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.2 s old, using for 20.0 s.
2018-03-10T07:10:17.448Z,1520665817.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:10:17.849Z,1520665817.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.6 s old, using for 20.0 s.
2018-03-10T07:10:17.849Z,1520665817.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:10:18.218Z,1520665818.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.0 s old, using for 20.0 s.
2018-03-10T07:10:18.219Z,1520665818.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:10:18.623Z,1520665818.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.4 s old, using for 20.0 s.
2018-03-10T07:10:18.625Z,1520665818.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:10:19.024Z,1520665819.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.8 s old, using for 20.0 s.
2018-03-10T07:10:19.025Z,1520665819.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:10:19.448Z,1520665819.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.2 s old, using for 20.0 s.
2018-03-10T07:10:19.449Z,1520665819.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:10:19.817Z,1520665819.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.6 s old, using for 20.0 s.
2018-03-10T07:10:19.818Z,1520665819.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:10:20.229Z,1520665820.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.0 s old, using for 20.0 s.
2018-03-10T07:10:20.230Z,1520665820.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:10:20.627Z,1520665820.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.4 s old, using for 20.0 s.
2018-03-10T07:10:20.628Z,1520665820.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:10:21.068Z,1520665821.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.9 s old, using for 20.0 s.
2018-03-10T07:10:21.068Z,1520665821.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:10:21.451Z,1520665821.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:10:21.823Z,1520665821.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:10:22.226Z,1520665822.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:10:22.649Z,1520665822.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:10:23.051Z,1520665823.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:10:23.428Z,1520665823.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:10:23.826Z,1520665823.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:10:24.268Z,1520665824.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:10:24.641Z,1520665824.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:10:25.030Z,1520665825.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:10:25.415Z,1520665825.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:10:25.905Z,1520665825.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:10:26.237Z,1520665826.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:10:26.675Z,1520665826.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:10:27.029Z,1520665827.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:10:27.413Z,1520665827.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:10:27.813Z,1520665827.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:10:28.211Z,1520665828.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:10:28.617Z,1520665828.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:10:29.022Z,1520665829.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:10:29.451Z,1520665829.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:10:29.836Z,1520665829.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:10:30.214Z,1520665830.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:10:30.630Z,1520665830.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:10:31.023Z,1520665831.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:10:31.424Z,1520665831.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:10:31.835Z,1520665831.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:10:32.277Z,1520665832.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:10:32.660Z,1520665832.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:10:33.026Z,1520665833.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:10:33.423Z,1520665833.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:10:33.846Z,1520665833.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:10:34.220Z,1520665834.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:10:34.626Z,1520665834.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:10:35.033Z,1520665835.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:10:35.458Z,1520665835.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:10:35.867Z,1520665835.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:10:36.223Z,1520665836.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:10:36.626Z,1520665836.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:10:37.045Z,1520665837.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:10:37.441Z,1520665837.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:10:37.836Z,1520665837.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:10:38.245Z,1520665838.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:10:38.649Z,1520665838.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:10:39.034Z,1520665839.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:10:39.422Z,1520665839.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:10:39.824Z,1520665839.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:10:40.245Z,1520665840.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:10:40.626Z,1520665840.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:10:41.035Z,1520665841.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:10:41.436Z,1520665841.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:10:41.868Z,1520665841.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:10:42.222Z,1520665842.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:10:42.630Z,1520665842.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:10:43.024Z,1520665843.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:10:43.447Z,1520665843.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:10:43.845Z,1520665843.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:10:44.236Z,1520665844.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:10:44.634Z,1520665844.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:10:45.050Z,1520665845.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:10:45.426Z,1520665845.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:10:45.833Z,1520665845.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:10:46.236Z,1520665846.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:10:46.645Z,1520665846.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:10:47.036Z,1520665847.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:10:47.435Z,1520665847.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:10:47.833Z,1520665847.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:10:48.225Z,1520665848.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:10:48.625Z,1520665848.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:10:49.029Z,1520665849.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:10:49.440Z,1520665849.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:10:49.853Z,1520665849.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:10:50.241Z,1520665850.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:10:50.645Z,1520665850.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:10:51.040Z,1520665851.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:10:51.431Z,1520665851.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:10:51.836Z,1520665851.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:10:52.227Z,1520665852.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:10:52.637Z,1520665852.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:10:53.033Z,1520665853.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:10:53.439Z,1520665853.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:10:53.837Z,1520665853.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:10:54.240Z,1520665854.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:10:54.610Z,1520665854.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:10:55.016Z,1520665855.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:10:55.448Z,1520665855.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:10:55.819Z,1520665855.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:10:56.248Z,1520665856.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:10:56.646Z,1520665856.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:10:57.042Z,1520665857.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:10:57.419Z,1520665857.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:10:57.814Z,1520665857.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:10:58.215Z,1520665858.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:10:58.641Z,1520665858.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:10:59.048Z,1520665859.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:10:59.453Z,1520665859.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:10:59.853Z,1520665859.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:11:00.222Z,1520665860.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:11:00.627Z,1520665860.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:11:01.049Z,1520665861.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:11:01.419Z,1520665861.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:11:01.864Z,1520665861.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:11:02.254Z,1520665862.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:11:02.652Z,1520665862.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:11:03.025Z,1520665863.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:11:03.428Z,1520665863.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:11:03.823Z,1520665863.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:11:04.252Z,1520665864.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:11:07.357Z,1520665867.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:11:07.537Z,1520665867.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:11:07.927Z,1520665867.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:11:08.319Z,1520665868.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:11:08.715Z,1520665868.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:11:09.116Z,1520665869.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:11:09.514Z,1520665869.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:11:09.925Z,1520665869.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:11:10.319Z,1520665870.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:11:10.723Z,1520665870.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:11:11.114Z,1520665871.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:11:11.514Z,1520665871.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:11:11.915Z,1520665871.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:11:12.321Z,1520665872.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:11:12.725Z,1520665872.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:11:13.127Z,1520665873.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:11:13.529Z,1520665873.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:11:13.921Z,1520665873.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:11:14.309Z,1520665874.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:11:14.719Z,1520665874.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:11:15.136Z,1520665875.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:11:15.521Z,1520665875.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:11:15.923Z,1520665875.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:11:16.328Z,1520665876.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:11:16.723Z,1520665876.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:11:17.115Z,1520665877.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:11:17.514Z,1520665877.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:11:17.912Z,1520665877.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:11:18.315Z,1520665878.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:11:18.724Z,1520665878.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:11:19.126Z,1520665879.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:11:19.532Z,1520665879.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:11:19.921Z,1520665879.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:11:20.318Z,1520665880.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:11:20.717Z,1520665880.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:11:21.122Z,1520665881.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:11:21.501Z,1520665881.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:11:21.924Z,1520665881.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:11:22.333Z,1520665882.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:11:22.727Z,1520665882.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:11:23.109Z,1520665883.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:11:23.501Z,1520665883.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:11:23.905Z,1520665883.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:11:24.302Z,1520665884.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:11:24.728Z,1520665884.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:11:25.129Z,1520665885.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:11:25.526Z,1520665885.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:11:25.905Z,1520665885.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:11:26.301Z,1520665886.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:11:26.709Z,1520665886.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:11:27.113Z,1520665887.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:11:27.536Z,1520665887.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:11:27.915Z,1520665887.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:11:28.335Z,1520665888.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:11:28.715Z,1520665888.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:11:29.117Z,1520665889.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:11:29.509Z,1520665889.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:11:29.917Z,1520665889.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:11:30.313Z,1520665890.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:11:30.715Z,1520665890.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:11:31.135Z,1520665891.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:11:31.514Z,1520665891.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:11:31.916Z,1520665891.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:11:32.338Z,1520665892.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:11:32.713Z,1520665892.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:11:33.117Z,1520665893.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:11:33.507Z,1520665893.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:11:33.922Z,1520665893.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:11:34.322Z,1520665894.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:11:34.715Z,1520665894.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:11:35.109Z,1520665895.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:11:35.510Z,1520665895.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:11:35.910Z,1520665895.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:11:36.313Z,1520665896.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:11:36.715Z,1520665896.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:11:37.111Z,1520665897.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:11:37.514Z,1520665897.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:11:37.911Z,1520665897.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:11:38.313Z,1520665898.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:11:38.710Z,1520665898.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:11:39.110Z,1520665899.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:11:39.516Z,1520665899.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:11:39.942Z,1520665899.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:11:40.315Z,1520665900.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:11:40.715Z,1520665900.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:11:41.112Z,1520665901.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:11:41.513Z,1520665901.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:11:41.913Z,1520665901.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:11:42.317Z,1520665902.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:11:42.720Z,1520665902.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:11:43.118Z,1520665903.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:11:43.515Z,1520665903.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:11:43.912Z,1520665903.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:11:44.317Z,1520665904.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:11:44.721Z,1520665904.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:11:45.125Z,1520665905.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:11:45.514Z,1520665905.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:11:45.925Z,1520665905.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:11:46.356Z,1520665906.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:11:46.753Z,1520665906.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:11:47.120Z,1520665907.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:11:47.528Z,1520665907.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:11:47.922Z,1520665907.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:11:48.330Z,1520665908.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:11:48.733Z,1520665908.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:11:49.137Z,1520665909.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:11:49.534Z,1520665909.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:11:49.917Z,1520665909.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:11:50.317Z,1520665910.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:11:50.721Z,1520665910.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:11:51.116Z,1520665911.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:11:51.517Z,1520665911.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:11:51.918Z,1520665911.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:11:52.326Z,1520665912.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:11:52.745Z,1520665912.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:11:53.109Z,1520665913.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:11:53.510Z,1520665913.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:11:53.913Z,1520665913.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:11:54.314Z,1520665914.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:11:54.718Z,1520665914.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:11:55.119Z,1520665915.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:11:55.525Z,1520665915.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:11:55.910Z,1520665915.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:11:56.312Z,1520665916.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:11:56.712Z,1520665916.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:11:57.116Z,1520665917.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:11:57.513Z,1520665917.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:11:57.960Z,1520665917.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:11:58.328Z,1520665918.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:11:58.718Z,1520665918.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:11:59.114Z,1520665919.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:11:59.513Z,1520665919.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:11:59.915Z,1520665919.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:12:00.301Z,1520665920.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:12:00.733Z,1520665920.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:12:01.128Z,1520665921.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:12:01.529Z,1520665921.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:12:01.925Z,1520665921.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:12:02.302Z,1520665922.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:12:02.725Z,1520665922.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:12:03.101Z,1520665923.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:12:03.502Z,1520665923.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:12:03.929Z,1520665923.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:12:04.330Z,1520665924.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:12:07.444Z,1520665927.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:12:07.605Z,1520665927.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:12:07.984Z,1520665927.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:12:08.389Z,1520665928.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:12:08.801Z,1520665928.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:12:09.193Z,1520665929.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:12:09.601Z,1520665929.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:12:09.980Z,1520665929.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:12:10.391Z,1520665930.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:12:10.801Z,1520665930.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:12:11.180Z,1520665931.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:12:11.583Z,1520665931.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:12:11.991Z,1520665931.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:12:12.390Z,1520665932.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:12:12.795Z,1520665932.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:12:13.182Z,1520665933.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:12:13.583Z,1520665933.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:12:13.989Z,1520665933.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:12:14.382Z,1520665934.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:12:14.792Z,1520665934.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:12:15.192Z,1520665935.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:12:15.591Z,1520665935.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:12:15.978Z,1520665935.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:12:16.369Z,1520665936.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:12:16.771Z,1520665936.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:12:17.171Z,1520665937.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:12:17.658Z,1520665937.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:12:17.983Z,1520665937.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:12:18.383Z,1520665938.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:12:18.792Z,1520665938.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:12:19.170Z,1520665939.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:12:19.569Z,1520665939.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:12:19.989Z,1520665939.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:12:20.389Z,1520665940.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:12:20.782Z,1520665940.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:12:21.200Z,1520665941.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:12:21.597Z,1520665941.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:12:21.989Z,1520665941.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:12:22.388Z,1520665942.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:12:22.805Z,1520665942.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:12:23.196Z,1520665943.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:12:23.587Z,1520665943.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:12:23.991Z,1520665943.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:12:24.394Z,1520665944.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:12:24.790Z,1520665944.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:12:25.170Z,1520665945.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:12:25.584Z,1520665945.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:12:25.971Z,1520665945.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:12:26.371Z,1520665946.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:12:26.794Z,1520665946.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:12:27.194Z,1520665947.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:12:27.593Z,1520665947.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:12:27.993Z,1520665947.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:12:28.377Z,1520665948.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:12:28.770Z,1520665948.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:12:29.175Z,1520665949.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:12:29.572Z,1520665949.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:12:30.000Z,1520665950.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:12:30.399Z,1520665950.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:12:30.800Z,1520665950.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:12:31.177Z,1520665951.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:12:31.599Z,1520665951.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:12:31.975Z,1520665951.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:12:32.370Z,1520665952.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:12:32.809Z,1520665952.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:12:33.228Z,1520665953.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:12:33.604Z,1520665953.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:12:33.978Z,1520665953.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:12:34.380Z,1520665954.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:12:34.778Z,1520665954.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:12:35.186Z,1520665955.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:12:35.605Z,1520665955.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:12:36.011Z,1520665956.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:12:36.408Z,1520665956.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:12:36.807Z,1520665956.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:12:37.180Z,1520665957.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:12:37.577Z,1520665957.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:12:37.982Z,1520665957.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:12:38.371Z,1520665958.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:12:38.782Z,1520665958.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:12:39.192Z,1520665959.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:12:39.584Z,1520665959.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:12:39.980Z,1520665959.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:12:40.378Z,1520665960.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:12:40.785Z,1520665960.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:12:41.181Z,1520665961.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:12:41.579Z,1520665961.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:12:41.997Z,1520665961.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:12:42.397Z,1520665962.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:12:42.797Z,1520665962.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:12:43.180Z,1520665963.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:12:43.578Z,1520665963.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:12:43.985Z,1520665963.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:12:44.385Z,1520665964.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:12:44.791Z,1520665964.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:12:45.191Z,1520665965.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:12:45.597Z,1520665965.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:12:46.000Z,1520665966.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:12:46.381Z,1520665966.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:12:46.781Z,1520665966.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:12:47.179Z,1520665967.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:12:47.586Z,1520665967.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:12:48.024Z,1520665968.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:12:48.390Z,1520665968.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:12:48.792Z,1520665968.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:12:49.185Z,1520665969.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:12:49.580Z,1520665969.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:12:49.980Z,1520665969.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:12:50.384Z,1520665970.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:12:50.790Z,1520665970.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:12:51.201Z,1520665971.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:12:51.589Z,1520665971.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:12:51.979Z,1520665971.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:12:52.380Z,1520665972.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:12:52.782Z,1520665972.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:12:53.185Z,1520665973.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:12:53.589Z,1520665973.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:12:53.997Z,1520665973.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:12:54.391Z,1520665974.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:12:54.792Z,1520665974.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:12:55.182Z,1520665975.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:12:55.589Z,1520665975.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:12:55.982Z,1520665975.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:12:56.384Z,1520665976.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:12:56.791Z,1520665976.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:12:57.192Z,1520665977.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:12:57.591Z,1520665977.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:12:57.989Z,1520665977.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:12:58.389Z,1520665978.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:12:58.788Z,1520665978.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:12:59.181Z,1520665979.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:12:59.585Z,1520665979.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:12:59.998Z,1520665979.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:13:00.413Z,1520665980.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:13:00.801Z,1520665980.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:13:01.179Z,1520665981.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:13:01.569Z,1520665981.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:13:01.992Z,1520665981.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:13:02.390Z,1520665982.390 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:13:02.390Z,1520665982.390 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 39
2018-03-10T07:13:02.390Z,1520665982.390 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-03-10T07:13:02.392Z,1520665982.392 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:13:02.393Z,1520665982.393 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 39
2018-03-10T07:13:02.393Z,1520665982.393 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-03-10T07:13:02.394Z,1520665982.394 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:13:02.394Z,1520665982.394 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 39
2018-03-10T07:13:02.394Z,1520665982.394 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-10T07:13:02.479Z,1520665982.479 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-03-10T07:13:02.479Z,1520665982.479 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-03-10T07:13:02.480Z,1520665982.480 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-10T07:13:02.871Z,1520665982.871 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-03-10T07:13:02.871Z,1520665982.871 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 39
2018-03-10T07:13:02.872Z,1520665982.872 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-03-10T07:13:02.872Z,1520665982.872 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 39
2018-03-10T07:13:02.872Z,1520665982.872 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-10T07:13:02.872Z,1520665982.872 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 39
2018-03-10T07:13:03.198Z,1520665983.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-03-10T07:13:03.199Z,1520665983.199 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-03-10T07:13:03.199Z,1520665983.199 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-03-10T07:13:03.200Z,1520665983.200 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-03-10T07:13:03.200Z,1520665983.200 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-03-10T07:13:03.200Z,1520665983.200 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-03-10T07:13:03.201Z,1520665983.201 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-10T07:13:03.201Z,1520665983.201 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-10T07:13:03.201Z,1520665983.201 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-10T07:13:03.578Z,1520665983.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-03-10T07:13:03.579Z,1520665983.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:13:03.582Z,1520665983.582 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-03-10T07:13:03.582Z,1520665983.582 [Default:CheckIn:C.Wait] Stopped
2018-03-10T07:13:03.582Z,1520665983.582 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-03-10T07:13:03.582Z,1520665983.582 [Default:CheckIn:D] Running Loop=1
2018-03-10T07:13:03.975Z,1520665983.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-03-10T07:13:03.976Z,1520665983.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:13:03.979Z,1520665983.979 [Default:CheckIn:D] Stopped
2018-03-10T07:13:03.979Z,1520665983.979 [Default:CheckIn:E] Running Loop=1
2018-03-10T07:13:04.377Z,1520665984.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-03-10T07:13:04.378Z,1520665984.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:13:04.382Z,1520665984.382 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 113.767635 min 
2018-03-10T07:13:04.382Z,1520665984.382 [Default:CheckIn:E] Stopped
2018-03-10T07:13:04.382Z,1520665984.382 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-03-10T07:13:04.382Z,1520665984.382 [Default:CheckIn] Stopped
2018-03-10T07:13:04.382Z,1520665984.382 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-03-10T07:13:04.382Z,1520665984.382 [Default:CheckIn](INFO): Running loop #12
2018-03-10T07:13:04.382Z,1520665984.382 [Default:CheckIn] Running Loop=12
2018-03-10T07:13:04.383Z,1520665984.383 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-03-10T07:13:04.383Z,1520665984.383 [Default:CheckIn:Read_GPS] Running Loop=1
2018-03-10T07:13:07.484Z,1520665987.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.1 s old, using for 20.0 s.
2018-03-10T07:13:07.485Z,1520665987.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:13:07.664Z,1520665987.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.3 s old, using for 20.0 s.
2018-03-10T07:13:07.665Z,1520665987.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:13:08.058Z,1520665988.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.7 s old, using for 20.0 s.
2018-03-10T07:13:08.059Z,1520665988.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:13:08.459Z,1520665988.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.1 s old, using for 20.0 s.
2018-03-10T07:13:08.460Z,1520665988.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:13:08.858Z,1520665988.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.5 s old, using for 20.0 s.
2018-03-10T07:13:08.859Z,1520665988.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:13:09.231Z,1520665989.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-03-10T07:13:09.232Z,1520665989.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:13:09.633Z,1520665989.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-03-10T07:13:09.634Z,1520665989.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:13:10.035Z,1520665990.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-03-10T07:13:10.036Z,1520665990.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:13:10.434Z,1520665990.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-03-10T07:13:10.436Z,1520665990.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:13:10.869Z,1520665990.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.5 s old, using for 20.0 s.
2018-03-10T07:13:10.870Z,1520665990.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:13:11.265Z,1520665991.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.9 s old, using for 20.0 s.
2018-03-10T07:13:11.266Z,1520665991.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:13:11.643Z,1520665991.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.3 s old, using for 20.0 s.
2018-03-10T07:13:11.644Z,1520665991.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:13:12.040Z,1520665992.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-03-10T07:13:12.041Z,1520665992.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:13:12.444Z,1520665992.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.1 s old, using for 20.0 s.
2018-03-10T07:13:12.444Z,1520665992.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:13:12.869Z,1520665992.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.5 s old, using for 20.0 s.
2018-03-10T07:13:12.870Z,1520665992.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:13:13.244Z,1520665993.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.9 s old, using for 20.0 s.
2018-03-10T07:13:13.245Z,1520665993.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:13:13.638Z,1520665993.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-03-10T07:13:13.639Z,1520665993.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:13:14.069Z,1520665994.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.7 s old, using for 20.0 s.
2018-03-10T07:13:14.070Z,1520665994.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:13:14.450Z,1520665994.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.1 s old, using for 20.0 s.
2018-03-10T07:13:14.467Z,1520665994.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:13:14.842Z,1520665994.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.5 s old, using for 20.0 s.
2018-03-10T07:13:14.843Z,1520665994.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:13:15.244Z,1520665995.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.9 s old, using for 20.0 s.
2018-03-10T07:13:15.245Z,1520665995.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:13:15.635Z,1520665995.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-03-10T07:13:15.636Z,1520665995.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:13:16.044Z,1520665996.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.7 s old, using for 20.0 s.
2018-03-10T07:13:16.045Z,1520665996.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:13:16.439Z,1520665996.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-03-10T07:13:16.440Z,1520665996.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:13:16.849Z,1520665996.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.5 s old, using for 20.0 s.
2018-03-10T07:13:16.849Z,1520665996.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:13:17.243Z,1520665997.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.9 s old, using for 20.0 s.
2018-03-10T07:13:17.244Z,1520665997.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:13:17.643Z,1520665997.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.3 s old, using for 20.0 s.
2018-03-10T07:13:17.644Z,1520665997.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:13:18.041Z,1520665998.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.7 s old, using for 20.0 s.
2018-03-10T07:13:18.042Z,1520665998.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:13:18.437Z,1520665998.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-03-10T07:13:18.438Z,1520665998.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:13:18.841Z,1520665998.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.5 s old, using for 20.0 s.
2018-03-10T07:13:18.842Z,1520665998.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:13:19.238Z,1520665999.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-03-10T07:13:19.239Z,1520665999.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:13:19.639Z,1520665999.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-03-10T07:13:19.640Z,1520665999.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:13:20.042Z,1520666000.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.7 s old, using for 20.0 s.
2018-03-10T07:13:20.044Z,1520666000.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:13:20.442Z,1520666000.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.1 s old, using for 20.0 s.
2018-03-10T07:13:20.443Z,1520666000.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:13:20.848Z,1520666000.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.5 s old, using for 20.0 s.
2018-03-10T07:13:20.849Z,1520666000.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:13:21.239Z,1520666001.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2018-03-10T07:13:21.240Z,1520666001.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:13:21.638Z,1520666001.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2018-03-10T07:13:21.639Z,1520666001.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:13:22.040Z,1520666002.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.7 s old, using for 20.0 s.
2018-03-10T07:13:22.041Z,1520666002.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:13:22.439Z,1520666002.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:13:22.844Z,1520666002.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:13:23.246Z,1520666003.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:13:23.654Z,1520666003.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:13:24.057Z,1520666004.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:13:24.438Z,1520666004.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:13:24.850Z,1520666004.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:13:25.265Z,1520666005.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:13:25.639Z,1520666005.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:13:26.054Z,1520666006.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:13:26.461Z,1520666006.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:13:26.857Z,1520666006.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:13:27.242Z,1520666007.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:13:27.640Z,1520666007.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:13:28.049Z,1520666008.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:13:28.441Z,1520666008.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:13:28.847Z,1520666008.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:13:29.253Z,1520666009.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:13:29.661Z,1520666009.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:13:30.042Z,1520666010.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:13:30.441Z,1520666010.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:13:30.853Z,1520666010.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:13:31.242Z,1520666011.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:13:31.639Z,1520666011.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:13:32.052Z,1520666012.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:13:32.455Z,1520666012.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:13:32.851Z,1520666012.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:13:33.249Z,1520666013.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:13:33.642Z,1520666013.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:13:34.041Z,1520666014.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:13:34.449Z,1520666014.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:13:34.854Z,1520666014.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:13:35.255Z,1520666015.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:13:35.652Z,1520666015.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:13:36.048Z,1520666016.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:13:36.450Z,1520666016.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:13:36.829Z,1520666016.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:13:37.250Z,1520666017.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:13:37.657Z,1520666017.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:13:38.069Z,1520666018.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:13:38.457Z,1520666018.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:13:38.849Z,1520666018.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:13:39.241Z,1520666019.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:13:39.629Z,1520666019.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:13:40.046Z,1520666020.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:13:40.429Z,1520666020.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:13:40.856Z,1520666020.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:13:41.253Z,1520666021.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:13:41.654Z,1520666021.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:13:42.030Z,1520666022.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:13:42.425Z,1520666022.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:13:42.853Z,1520666022.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:13:43.231Z,1520666023.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:13:43.644Z,1520666023.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:13:44.055Z,1520666024.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:13:44.451Z,1520666024.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:13:44.857Z,1520666024.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:13:45.233Z,1520666025.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:13:45.653Z,1520666025.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:13:46.032Z,1520666026.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:13:46.457Z,1520666026.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:13:46.877Z,1520666026.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:13:47.290Z,1520666027.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:13:47.641Z,1520666027.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:13:48.076Z,1520666028.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:13:48.501Z,1520666028.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:13:48.885Z,1520666028.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:13:49.250Z,1520666029.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:13:49.664Z,1520666029.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:13:50.061Z,1520666030.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:13:50.512Z,1520666030.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:13:50.906Z,1520666030.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:13:51.249Z,1520666031.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:13:51.653Z,1520666031.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:13:52.049Z,1520666032.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:13:52.449Z,1520666032.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:13:52.857Z,1520666032.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:13:53.257Z,1520666033.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:13:53.656Z,1520666033.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:13:54.049Z,1520666034.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:13:54.445Z,1520666034.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:13:54.830Z,1520666034.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:13:55.231Z,1520666035.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:13:55.634Z,1520666035.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:13:56.054Z,1520666036.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:13:56.454Z,1520666036.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:13:56.854Z,1520666036.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:13:57.229Z,1520666037.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:13:57.630Z,1520666037.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:13:58.041Z,1520666038.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:13:58.435Z,1520666038.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:13:58.863Z,1520666038.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:13:59.267Z,1520666039.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:13:59.644Z,1520666039.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:14:00.045Z,1520666040.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:14:00.438Z,1520666040.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:14:00.844Z,1520666040.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:14:01.268Z,1520666041.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:14:01.638Z,1520666041.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:14:02.042Z,1520666042.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:14:02.448Z,1520666042.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:14:02.843Z,1520666042.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:14:03.239Z,1520666043.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:14:03.646Z,1520666043.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:14:04.072Z,1520666044.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:14:04.437Z,1520666044.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:14:07.926Z,1520666047.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:14:08.105Z,1520666048.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:14:08.488Z,1520666048.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:14:08.886Z,1520666048.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:14:09.277Z,1520666049.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:14:09.688Z,1520666049.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:14:10.083Z,1520666050.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:14:10.486Z,1520666050.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:14:10.878Z,1520666050.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:14:11.278Z,1520666051.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:14:11.687Z,1520666051.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:14:12.097Z,1520666052.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:14:12.487Z,1520666052.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:14:12.879Z,1520666052.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:14:13.280Z,1520666053.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:14:13.681Z,1520666053.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:14:14.084Z,1520666054.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:14:14.497Z,1520666054.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:14:14.888Z,1520666054.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:14:15.280Z,1520666055.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:14:15.681Z,1520666055.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:14:16.078Z,1520666056.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:14:16.486Z,1520666056.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:14:16.909Z,1520666056.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:14:17.286Z,1520666057.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:14:17.685Z,1520666057.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:14:18.065Z,1520666058.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:14:18.486Z,1520666058.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:14:18.885Z,1520666058.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:14:19.287Z,1520666059.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:14:19.685Z,1520666059.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:14:20.087Z,1520666060.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:14:20.498Z,1520666060.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:14:20.886Z,1520666060.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:14:21.264Z,1520666061.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:14:21.686Z,1520666061.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:14:22.078Z,1520666062.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:14:22.466Z,1520666062.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:14:22.891Z,1520666062.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:14:23.289Z,1520666063.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:14:23.697Z,1520666063.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:14:24.066Z,1520666064.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:14:24.465Z,1520666064.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:14:24.866Z,1520666064.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:14:25.267Z,1520666065.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:14:25.689Z,1520666065.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:14:26.090Z,1520666066.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:14:26.488Z,1520666066.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:14:26.897Z,1520666066.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:14:27.265Z,1520666067.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:14:27.667Z,1520666067.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:14:28.067Z,1520666068.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:14:28.489Z,1520666068.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:14:28.898Z,1520666068.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:14:29.304Z,1520666069.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:14:29.698Z,1520666069.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:14:30.070Z,1520666070.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:14:30.470Z,1520666070.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:14:30.864Z,1520666070.864 [BPC1](ERROR): Failed to receive battery data
2018-03-10T07:14:30.864Z,1520666070.864 [BPC1] Communications Fault, FailCount= 1
2018-03-10T07:14:30.864Z,1520666070.864 [BPC1](ERROR): Communications Fault
2018-03-10T07:14:30.872Z,1520666070.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:14:30.975Z,1520666070.975 [CBIT](ERROR): Communications Fault in component: BPC1
2018-03-10T07:14:31.271Z,1520666071.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:14:31.672Z,1520666071.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:14:32.079Z,1520666072.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:14:32.167Z,1520666072.167 [CBIT](INFO): Clearing failed state for component BPC1
2018-03-10T07:14:32.167Z,1520666072.167 [BPC1] No Fault, FailCount= 1
2018-03-10T07:14:32.545Z,1520666072.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:14:32.903Z,1520666072.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:14:33.274Z,1520666073.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:14:33.679Z,1520666073.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:14:34.078Z,1520666074.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:14:34.479Z,1520666074.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:14:34.880Z,1520666074.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:14:35.278Z,1520666075.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:14:35.679Z,1520666075.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:14:36.081Z,1520666076.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:14:36.472Z,1520666076.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:14:36.877Z,1520666076.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:14:37.278Z,1520666077.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:14:37.672Z,1520666077.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:14:38.082Z,1520666078.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:14:38.482Z,1520666078.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:14:38.885Z,1520666078.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:14:39.274Z,1520666079.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:14:39.677Z,1520666079.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:14:40.109Z,1520666080.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:14:40.473Z,1520666080.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:14:40.874Z,1520666080.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:14:41.288Z,1520666081.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:14:41.693Z,1520666081.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:14:42.094Z,1520666082.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:14:42.465Z,1520666082.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:14:42.869Z,1520666082.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:14:43.265Z,1520666083.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:14:43.665Z,1520666083.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:14:44.087Z,1520666084.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:14:44.488Z,1520666084.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:14:44.886Z,1520666084.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:14:45.265Z,1520666085.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:14:45.664Z,1520666085.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:14:46.090Z,1520666086.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:14:46.465Z,1520666086.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:14:46.896Z,1520666086.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:14:47.294Z,1520666087.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:14:47.694Z,1520666087.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:14:48.065Z,1520666088.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:14:48.493Z,1520666088.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:14:48.870Z,1520666088.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:14:49.273Z,1520666089.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:14:49.665Z,1520666089.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:14:50.091Z,1520666090.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:14:50.496Z,1520666090.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:14:50.894Z,1520666090.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:14:51.269Z,1520666091.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:14:51.669Z,1520666091.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:14:52.070Z,1520666092.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:14:52.469Z,1520666092.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:14:52.887Z,1520666092.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:14:53.278Z,1520666093.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:14:53.712Z,1520666093.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:14:54.072Z,1520666094.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:14:54.477Z,1520666094.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:14:54.871Z,1520666094.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:14:55.273Z,1520666095.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:14:55.674Z,1520666095.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:14:56.078Z,1520666096.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:14:56.486Z,1520666096.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:14:56.878Z,1520666096.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:14:57.273Z,1520666097.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:14:57.673Z,1520666097.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:14:58.074Z,1520666098.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:14:58.474Z,1520666098.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:14:58.878Z,1520666098.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:14:59.286Z,1520666099.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:14:59.678Z,1520666099.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:15:00.070Z,1520666100.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:15:00.473Z,1520666100.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:15:00.881Z,1520666100.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:15:01.275Z,1520666101.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:15:01.672Z,1520666101.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:15:02.079Z,1520666102.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:15:02.474Z,1520666102.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:15:02.872Z,1520666102.872 [BPC1](FAULT): Failed to initialize
2018-03-10T07:15:02.872Z,1520666102.872 [BPC1] Communications Fault, FailCount= 2
2018-03-10T07:15:02.872Z,1520666102.872 [BPC1](ERROR): Communications Fault
2018-03-10T07:15:02.880Z,1520666102.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:15:02.979Z,1520666102.979 [CBIT](ERROR): Communications Fault in component: BPC1
2018-03-10T07:15:03.274Z,1520666103.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:15:03.674Z,1520666103.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:15:04.074Z,1520666104.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:15:04.147Z,1520666104.147 [CBIT](INFO): Clearing failed state for component BPC1
2018-03-10T07:15:04.147Z,1520666104.147 [BPC1] No Fault, FailCount= 2
2018-03-10T07:15:04.525Z,1520666104.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:15:04.886Z,1520666104.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:15:05.286Z,1520666105.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:15:05.678Z,1520666105.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:15:08.809Z,1520666108.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:15:08.961Z,1520666108.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:15:09.366Z,1520666109.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:15:09.763Z,1520666109.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:15:10.166Z,1520666110.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:15:10.553Z,1520666110.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:15:10.955Z,1520666110.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:15:11.361Z,1520666111.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:15:11.762Z,1520666111.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:15:12.162Z,1520666112.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:15:12.564Z,1520666112.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:15:12.955Z,1520666112.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:15:13.354Z,1520666113.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:15:13.755Z,1520666113.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:15:14.163Z,1520666114.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:15:14.563Z,1520666114.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:15:14.962Z,1520666114.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:15:15.354Z,1520666115.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:15:15.754Z,1520666115.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:15:16.153Z,1520666116.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:15:16.555Z,1520666116.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:15:16.963Z,1520666116.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:15:17.365Z,1520666117.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:15:17.762Z,1520666117.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:15:18.154Z,1520666118.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:15:18.554Z,1520666118.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:15:18.955Z,1520666118.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:15:19.354Z,1520666119.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:15:19.752Z,1520666119.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:15:20.169Z,1520666120.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:15:20.565Z,1520666120.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:15:20.964Z,1520666120.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:15:21.360Z,1520666121.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:15:21.757Z,1520666121.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:15:22.158Z,1520666122.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:15:22.554Z,1520666122.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:15:22.972Z,1520666122.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:15:23.358Z,1520666123.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:15:23.765Z,1520666123.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:15:24.157Z,1520666124.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:15:24.556Z,1520666124.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:15:24.954Z,1520666124.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:15:25.354Z,1520666125.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:15:25.759Z,1520666125.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:15:26.162Z,1520666126.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:15:26.243Z,1520666126.243 [CBIT](DEBUG): EFC running - data check-sum false
2018-03-10T07:15:26.563Z,1520666126.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:15:26.964Z,1520666126.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:15:27.355Z,1520666127.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:15:27.757Z,1520666127.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:15:28.143Z,1520666128.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:15:28.559Z,1520666128.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:15:28.968Z,1520666128.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:15:29.367Z,1520666129.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:15:29.765Z,1520666129.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:15:30.158Z,1520666130.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:15:30.537Z,1520666130.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:15:30.963Z,1520666130.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:15:31.359Z,1520666131.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:15:31.765Z,1520666131.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:15:32.162Z,1520666132.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:15:32.573Z,1520666132.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:15:32.966Z,1520666132.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:15:33.365Z,1520666133.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:15:33.745Z,1520666133.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:15:34.141Z,1520666134.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:15:34.535Z,1520666134.535 [BPC1](FAULT): Failed to initialize
2018-03-10T07:15:34.535Z,1520666134.535 [BPC1] Communications Fault, FailCount= 3
2018-03-10T07:15:34.535Z,1520666134.535 [BPC1](ERROR): Communications Fault
2018-03-10T07:15:34.542Z,1520666134.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:15:34.646Z,1520666134.646 [CBIT](ERROR): Communications Fault in component: BPC1
2018-03-10T07:15:34.968Z,1520666134.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:15:35.370Z,1520666135.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:15:35.770Z,1520666135.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:15:35.855Z,1520666135.855 [CBIT](INFO): Clearing failed state for component BPC1
2018-03-10T07:15:35.855Z,1520666135.855 [BPC1] No Fault, FailCount= 3
2018-03-10T07:15:36.213Z,1520666136.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:15:36.541Z,1520666136.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:15:36.943Z,1520666136.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:15:37.341Z,1520666137.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:15:37.741Z,1520666137.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:15:38.170Z,1520666138.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:15:38.571Z,1520666138.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:15:38.969Z,1520666138.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:15:39.341Z,1520666139.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:15:39.742Z,1520666139.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:15:40.149Z,1520666140.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:15:40.549Z,1520666140.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:15:40.974Z,1520666140.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:15:41.358Z,1520666141.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:15:41.758Z,1520666141.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:15:42.153Z,1520666142.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:15:42.555Z,1520666142.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:15:42.953Z,1520666142.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:15:43.357Z,1520666143.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:15:43.749Z,1520666143.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:15:44.154Z,1520666144.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:15:44.579Z,1520666144.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:15:44.962Z,1520666144.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:15:45.353Z,1520666145.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:15:45.751Z,1520666145.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:15:46.160Z,1520666146.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:15:46.553Z,1520666146.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:15:46.995Z,1520666146.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:15:47.357Z,1520666147.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:15:47.799Z,1520666147.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:15:48.157Z,1520666148.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:15:48.565Z,1520666148.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:15:48.959Z,1520666148.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:15:49.352Z,1520666149.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:15:49.773Z,1520666149.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:15:50.212Z,1520666150.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:15:50.568Z,1520666150.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:15:50.964Z,1520666150.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:15:51.356Z,1520666151.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:15:51.766Z,1520666151.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:15:52.141Z,1520666152.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:15:52.541Z,1520666152.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:15:52.966Z,1520666152.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:15:53.369Z,1520666153.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:15:53.761Z,1520666153.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:15:54.142Z,1520666154.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:15:54.538Z,1520666154.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:15:54.942Z,1520666154.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:15:55.359Z,1520666155.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:15:55.746Z,1520666155.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:15:56.158Z,1520666156.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:15:56.565Z,1520666156.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:15:56.986Z,1520666156.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:15:57.342Z,1520666157.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:15:57.743Z,1520666157.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:15:58.137Z,1520666158.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:15:58.541Z,1520666158.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:15:58.985Z,1520666158.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:15:59.373Z,1520666159.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:15:59.767Z,1520666159.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:16:00.157Z,1520666160.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:16:00.550Z,1520666160.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:16:00.958Z,1520666160.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:16:01.359Z,1520666161.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:16:01.742Z,1520666161.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:16:02.163Z,1520666162.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:16:02.577Z,1520666162.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:16:02.971Z,1520666162.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:16:03.349Z,1520666163.349 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:16:03.349Z,1520666163.349 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 40
2018-03-10T07:16:03.349Z,1520666163.349 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-03-10T07:16:03.367Z,1520666163.367 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:16:03.367Z,1520666163.367 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 40
2018-03-10T07:16:03.367Z,1520666163.367 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-03-10T07:16:03.369Z,1520666163.369 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:16:03.369Z,1520666163.369 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 40
2018-03-10T07:16:03.369Z,1520666163.369 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-10T07:16:03.449Z,1520666163.449 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-03-10T07:16:03.449Z,1520666163.449 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-03-10T07:16:03.449Z,1520666163.449 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-10T07:16:03.819Z,1520666163.819 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-03-10T07:16:03.819Z,1520666163.819 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 40
2018-03-10T07:16:03.820Z,1520666163.820 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-03-10T07:16:03.820Z,1520666163.820 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 40
2018-03-10T07:16:03.820Z,1520666163.820 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-10T07:16:03.820Z,1520666163.820 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 40
2018-03-10T07:16:04.145Z,1520666164.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-03-10T07:16:04.145Z,1520666164.145 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-03-10T07:16:04.146Z,1520666164.146 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-03-10T07:16:04.146Z,1520666164.146 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-03-10T07:16:04.147Z,1520666164.147 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-03-10T07:16:04.147Z,1520666164.147 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-03-10T07:16:04.147Z,1520666164.147 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-10T07:16:04.148Z,1520666164.148 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-10T07:16:04.148Z,1520666164.148 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-10T07:16:04.560Z,1520666164.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-03-10T07:16:04.561Z,1520666164.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:16:07.660Z,1520666167.660 [BPC1](FAULT): Failed to initialize
2018-03-10T07:16:07.660Z,1520666167.660 [BPC1] Communications Fault, FailCount= 4
2018-03-10T07:16:07.660Z,1520666167.660 [BPC1](ERROR): Communications Fault
2018-03-10T07:16:07.698Z,1520666167.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.3 s old, using for 20.0 s.
2018-03-10T07:16:07.699Z,1520666167.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:16:07.779Z,1520666167.779 [CBIT](ERROR): Communications Fault in component: BPC1
2018-03-10T07:16:07.868Z,1520666167.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.5 s old, using for 20.0 s.
2018-03-10T07:16:07.869Z,1520666167.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:16:08.258Z,1520666168.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.9 s old, using for 20.0 s.
2018-03-10T07:16:08.259Z,1520666168.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:16:08.653Z,1520666168.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.3 s old, using for 20.0 s.
2018-03-10T07:16:08.654Z,1520666168.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:16:08.735Z,1520666168.735 [CBIT](INFO): Clearing failed state for component BPC1
2018-03-10T07:16:08.735Z,1520666168.735 [BPC1] No Fault, FailCount= 4
2018-03-10T07:16:09.108Z,1520666169.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.8 s old, using for 20.0 s.
2018-03-10T07:16:09.109Z,1520666169.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:16:09.444Z,1520666169.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.1 s old, using for 20.0 s.
2018-03-10T07:16:09.445Z,1520666169.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:16:09.874Z,1520666169.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.5 s old, using for 20.0 s.
2018-03-10T07:16:09.874Z,1520666169.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:16:10.253Z,1520666170.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.9 s old, using for 20.0 s.
2018-03-10T07:16:10.254Z,1520666170.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:16:10.654Z,1520666170.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.3 s old, using for 20.0 s.
2018-03-10T07:16:10.655Z,1520666170.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:16:11.053Z,1520666171.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.7 s old, using for 20.0 s.
2018-03-10T07:16:11.054Z,1520666171.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:16:11.457Z,1520666171.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.1 s old, using for 20.0 s.
2018-03-10T07:16:11.458Z,1520666171.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:16:11.856Z,1520666171.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.5 s old, using for 20.0 s.
2018-03-10T07:16:11.857Z,1520666171.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:16:12.251Z,1520666172.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.9 s old, using for 20.0 s.
2018-03-10T07:16:12.252Z,1520666172.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:16:12.632Z,1520666172.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.3 s old, using for 20.0 s.
2018-03-10T07:16:12.633Z,1520666172.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:16:13.058Z,1520666173.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.7 s old, using for 20.0 s.
2018-03-10T07:16:13.059Z,1520666173.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:16:13.457Z,1520666173.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.1 s old, using for 20.0 s.
2018-03-10T07:16:13.458Z,1520666173.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:16:13.869Z,1520666173.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.5 s old, using for 20.0 s.
2018-03-10T07:16:13.870Z,1520666173.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:16:14.256Z,1520666174.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.9 s old, using for 20.0 s.
2018-03-10T07:16:14.257Z,1520666174.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:16:14.668Z,1520666174.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.3 s old, using for 20.0 s.
2018-03-10T07:16:14.669Z,1520666174.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:16:15.038Z,1520666175.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.7 s old, using for 20.0 s.
2018-03-10T07:16:15.039Z,1520666175.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:16:15.437Z,1520666175.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.1 s old, using for 20.0 s.
2018-03-10T07:16:15.438Z,1520666175.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:16:15.864Z,1520666175.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.5 s old, using for 20.0 s.
2018-03-10T07:16:15.865Z,1520666175.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:16:16.264Z,1520666176.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.9 s old, using for 20.0 s.
2018-03-10T07:16:16.265Z,1520666176.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:16:16.658Z,1520666176.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.3 s old, using for 20.0 s.
2018-03-10T07:16:16.659Z,1520666176.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:16:17.040Z,1520666177.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.7 s old, using for 20.0 s.
2018-03-10T07:16:17.041Z,1520666177.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:16:17.436Z,1520666177.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.1 s old, using for 20.0 s.
2018-03-10T07:16:17.437Z,1520666177.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:16:17.862Z,1520666177.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.5 s old, using for 20.0 s.
2018-03-10T07:16:17.862Z,1520666177.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:16:18.239Z,1520666178.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.9 s old, using for 20.0 s.
2018-03-10T07:16:18.240Z,1520666178.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:16:18.638Z,1520666178.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.3 s old, using for 20.0 s.
2018-03-10T07:16:18.640Z,1520666178.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:16:19.064Z,1520666179.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.7 s old, using for 20.0 s.
2018-03-10T07:16:19.065Z,1520666179.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:16:19.468Z,1520666179.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.1 s old, using for 20.0 s.
2018-03-10T07:16:19.469Z,1520666179.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:16:19.868Z,1520666179.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.5 s old, using for 20.0 s.
2018-03-10T07:16:19.869Z,1520666179.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:16:20.239Z,1520666180.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.9 s old, using for 20.0 s.
2018-03-10T07:16:20.240Z,1520666180.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:16:20.636Z,1520666180.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.3 s old, using for 20.0 s.
2018-03-10T07:16:20.637Z,1520666180.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:16:21.059Z,1520666181.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.7 s old, using for 20.0 s.
2018-03-10T07:16:21.060Z,1520666181.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:16:21.438Z,1520666181.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.1 s old, using for 20.0 s.
2018-03-10T07:16:21.440Z,1520666181.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:16:21.867Z,1520666181.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.5 s old, using for 20.0 s.
2018-03-10T07:16:21.868Z,1520666181.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:16:22.262Z,1520666182.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.9 s old, using for 20.0 s.
2018-03-10T07:16:22.264Z,1520666182.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:16:22.665Z,1520666182.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.3 s old, using for 20.0 s.
2018-03-10T07:16:22.666Z,1520666182.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:16:23.063Z,1520666183.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.7 s old, using for 20.0 s.
2018-03-10T07:16:23.064Z,1520666183.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:16:23.439Z,1520666183.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:16:23.836Z,1520666183.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:16:24.263Z,1520666184.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:16:24.638Z,1520666184.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:16:25.065Z,1520666185.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:16:25.468Z,1520666185.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:16:25.869Z,1520666185.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:16:26.261Z,1520666186.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:16:26.637Z,1520666186.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:16:27.038Z,1520666187.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:16:27.461Z,1520666187.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:16:27.868Z,1520666187.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:16:28.263Z,1520666188.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:16:28.729Z,1520666188.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:16:29.062Z,1520666189.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:16:29.465Z,1520666189.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:16:29.838Z,1520666189.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:16:30.238Z,1520666190.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:16:30.659Z,1520666190.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:16:31.064Z,1520666191.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:16:31.465Z,1520666191.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:16:31.870Z,1520666191.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:16:32.261Z,1520666192.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:16:32.650Z,1520666192.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:16:33.049Z,1520666193.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:16:33.442Z,1520666193.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:16:33.870Z,1520666193.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:16:34.250Z,1520666194.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:16:34.644Z,1520666194.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:16:35.073Z,1520666195.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:16:35.468Z,1520666195.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:16:35.843Z,1520666195.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:16:36.243Z,1520666196.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:16:36.644Z,1520666196.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:16:37.069Z,1520666197.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:16:37.475Z,1520666197.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:16:37.849Z,1520666197.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:16:38.244Z,1520666198.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:16:38.657Z,1520666198.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:16:39.047Z,1520666199.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:16:39.444Z,1520666199.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:16:39.877Z,1520666199.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:16:40.277Z,1520666200.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:16:40.676Z,1520666200.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:16:41.043Z,1520666201.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:16:41.449Z,1520666201.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:16:41.884Z,1520666201.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:16:42.273Z,1520666202.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:16:42.646Z,1520666202.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:16:43.054Z,1520666203.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:16:43.456Z,1520666203.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:16:43.854Z,1520666203.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:16:44.253Z,1520666204.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:16:44.647Z,1520666204.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:16:45.082Z,1520666205.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:16:45.453Z,1520666205.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:16:45.857Z,1520666205.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:16:46.255Z,1520666206.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:16:46.665Z,1520666206.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:16:47.068Z,1520666207.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:16:47.447Z,1520666207.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:16:47.844Z,1520666207.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:16:48.240Z,1520666208.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:16:48.646Z,1520666208.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:16:49.055Z,1520666209.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:16:49.454Z,1520666209.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:16:49.869Z,1520666209.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:16:50.253Z,1520666210.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:16:50.649Z,1520666210.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:16:51.046Z,1520666211.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:16:51.450Z,1520666211.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:16:51.858Z,1520666211.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:16:52.257Z,1520666212.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:16:52.652Z,1520666212.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:16:53.049Z,1520666213.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:16:53.426Z,1520666213.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:16:53.851Z,1520666213.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:16:54.265Z,1520666214.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:16:54.668Z,1520666214.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:16:55.061Z,1520666215.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:16:55.464Z,1520666215.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:16:55.861Z,1520666215.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:16:56.264Z,1520666216.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:16:56.638Z,1520666216.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:16:57.041Z,1520666217.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:16:57.436Z,1520666217.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:16:57.866Z,1520666217.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:16:58.261Z,1520666218.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:16:58.661Z,1520666218.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:16:59.032Z,1520666219.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:16:59.458Z,1520666219.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:16:59.841Z,1520666219.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:17:00.234Z,1520666220.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:17:00.637Z,1520666220.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:17:01.060Z,1520666221.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:17:01.458Z,1520666221.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:17:01.861Z,1520666221.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:17:02.236Z,1520666222.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:17:02.662Z,1520666222.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:17:03.040Z,1520666223.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:17:03.437Z,1520666223.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:17:03.866Z,1520666223.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:17:04.269Z,1520666224.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:17:04.669Z,1520666224.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:17:07.778Z,1520666227.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:17:07.933Z,1520666227.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:17:08.336Z,1520666228.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:17:08.731Z,1520666228.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:17:09.142Z,1520666229.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:17:09.545Z,1520666229.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:17:09.924Z,1520666229.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:17:10.329Z,1520666230.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:17:10.731Z,1520666230.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:17:11.131Z,1520666231.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:17:11.530Z,1520666231.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:17:11.923Z,1520666231.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:17:12.323Z,1520666232.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:17:12.723Z,1520666232.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:17:13.121Z,1520666233.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:17:13.525Z,1520666233.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:17:13.932Z,1520666233.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:17:14.278Z,1520666234.278 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-03-10T07:17:14.278Z,1520666234.278 [NAL9602] Data Fault, FailCount= 2
2018-03-10T07:17:14.278Z,1520666234.278 [NAL9602](ERROR): Data Fault
2018-03-10T07:17:14.333Z,1520666234.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:17:14.411Z,1520666234.411 [CBIT](ERROR): Data Fault in component: NAL9602
2018-03-10T07:17:14.680Z,1520666234.680 [NAL9602](INFO): Powering down
2018-03-10T07:17:14.729Z,1520666234.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:17:15.124Z,1520666235.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:17:15.521Z,1520666235.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:17:15.599Z,1520666235.599 [CBIT](INFO): Clearing failed state for component NAL9602
2018-03-10T07:17:15.599Z,1520666235.599 [NAL9602] No Fault, FailCount= 2
2018-03-10T07:17:15.926Z,1520666235.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:17:16.323Z,1520666236.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:17:16.723Z,1520666236.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:17:17.123Z,1520666237.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:17:17.523Z,1520666237.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:17:17.922Z,1520666237.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:17:18.322Z,1520666238.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:17:18.723Z,1520666238.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:17:19.123Z,1520666239.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:17:19.523Z,1520666239.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:17:19.930Z,1520666239.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:17:20.327Z,1520666240.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:17:20.730Z,1520666240.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:17:21.145Z,1520666241.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:17:21.525Z,1520666241.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:17:21.928Z,1520666241.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:17:22.327Z,1520666242.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:17:22.727Z,1520666242.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:17:23.105Z,1520666243.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:17:23.525Z,1520666243.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:17:23.909Z,1520666243.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:17:24.308Z,1520666244.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:17:24.733Z,1520666244.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:17:25.109Z,1520666245.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:17:25.505Z,1520666245.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:17:25.909Z,1520666245.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:17:26.309Z,1520666246.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:17:26.715Z,1520666246.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:17:27.110Z,1520666247.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:17:27.513Z,1520666247.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:17:27.916Z,1520666247.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:17:28.314Z,1520666248.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:17:28.717Z,1520666248.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:17:29.141Z,1520666249.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:17:29.510Z,1520666249.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:17:29.909Z,1520666249.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:17:30.337Z,1520666250.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:17:30.709Z,1520666250.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:17:31.117Z,1520666251.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:17:31.508Z,1520666251.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:17:31.913Z,1520666251.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:17:32.342Z,1520666252.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:17:32.743Z,1520666252.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:17:33.113Z,1520666253.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:17:33.521Z,1520666253.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:17:33.913Z,1520666253.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:17:34.313Z,1520666254.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:17:34.717Z,1520666254.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:17:35.117Z,1520666255.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:17:35.509Z,1520666255.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:17:35.917Z,1520666255.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:17:36.316Z,1520666256.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:17:36.708Z,1520666256.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:17:37.118Z,1520666257.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:17:37.512Z,1520666257.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:17:37.909Z,1520666257.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:17:38.312Z,1520666258.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:17:38.712Z,1520666258.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:17:39.113Z,1520666259.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:17:39.513Z,1520666259.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:17:39.924Z,1520666259.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:17:40.317Z,1520666260.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:17:40.717Z,1520666260.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:17:41.118Z,1520666261.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:17:41.517Z,1520666261.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:17:41.925Z,1520666261.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:17:42.316Z,1520666262.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:17:42.717Z,1520666262.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:17:43.121Z,1520666263.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:17:43.517Z,1520666263.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:17:43.917Z,1520666263.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:17:44.322Z,1520666264.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:17:44.765Z,1520666264.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:17:45.076Z,1520666265.076 [NAL9602](INFO): Powering up NAL9602
2018-03-10T07:17:45.171Z,1520666265.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:17:45.537Z,1520666265.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:17:45.941Z,1520666265.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:17:46.330Z,1520666266.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:17:46.740Z,1520666266.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:17:47.124Z,1520666267.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:17:47.521Z,1520666267.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:17:47.949Z,1520666267.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:17:48.328Z,1520666268.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:17:48.729Z,1520666268.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:17:49.117Z,1520666269.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:17:49.512Z,1520666269.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:17:49.912Z,1520666269.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:17:50.317Z,1520666270.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:17:50.713Z,1520666270.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:17:51.108Z,1520666271.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:17:51.537Z,1520666271.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:17:51.912Z,1520666271.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:17:52.312Z,1520666272.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:17:52.713Z,1520666272.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:17:53.113Z,1520666273.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:17:53.513Z,1520666273.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:17:53.917Z,1520666273.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:17:54.313Z,1520666274.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:17:54.712Z,1520666274.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:17:55.113Z,1520666275.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:17:55.537Z,1520666275.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:17:55.881Z,1520666275.881 [NAL9602](INFO): NAL9602 initialized
2018-03-10T07:17:55.935Z,1520666275.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:17:56.348Z,1520666276.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:17:56.747Z,1520666276.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:17:57.126Z,1520666277.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:17:57.520Z,1520666277.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:17:57.947Z,1520666277.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:17:58.317Z,1520666278.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:17:58.722Z,1520666278.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:17:59.147Z,1520666279.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:17:59.530Z,1520666279.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:17:59.917Z,1520666279.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:18:00.318Z,1520666280.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:18:00.719Z,1520666280.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:18:01.122Z,1520666281.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:18:01.523Z,1520666281.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:18:01.918Z,1520666281.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:18:02.329Z,1520666282.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:18:02.727Z,1520666282.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:18:03.126Z,1520666283.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:18:03.533Z,1520666283.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:18:03.921Z,1520666283.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:18:04.318Z,1520666284.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:18:04.727Z,1520666284.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:18:04.730Z,1520666284.730 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-03-10T07:13:04.4Z
2018-03-10T07:18:04.730Z,1520666284.730 [Default:CheckIn:Read_GPS] Stopped
2018-03-10T07:18:04.731Z,1520666284.731 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-03-10T07:18:07.868Z,1520666287.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:18:08.275Z,1520666288.275 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20180310T051512/Courier0048.lzma
2018-03-10T07:18:08.353Z,1520666288.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:18:08.601Z,1520666288.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:18:08.937Z,1520666288.937 [DataOverHttps](INFO): Moved sent file to Logs/20180310T051512/Courier0048.lzma.bak
2018-03-10T07:18:08.937Z,1520666288.937 [DataOverHttps](INFO): SBD MOMSN=8002648
2018-03-10T07:18:08.999Z,1520666288.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:18:09.657Z,1520666289.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:18:09.845Z,1520666289.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:18:10.249Z,1520666290.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:18:10.614Z,1520666290.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:18:13.718Z,1520666293.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:18:13.859Z,1520666293.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:18:14.262Z,1520666294.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:18:14.677Z,1520666294.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:18:15.072Z,1520666295.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:18:15.456Z,1520666295.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:18:15.904Z,1520666295.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:18:19.126Z,1520666299.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:18:19.277Z,1520666299.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:18:19.633Z,1520666299.633 [DataOverHttps](INFO): Sending 168 bytes from file Logs/20180310T051512/Express0049.lzma
2018-03-10T07:18:19.697Z,1520666299.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:18:20.085Z,1520666300.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:18:20.548Z,1520666300.548 [DataOverHttps](INFO): Moved sent file to Logs/20180310T051512/Express0049.lzma.bak
2018-03-10T07:18:20.548Z,1520666300.548 [DataOverHttps](INFO): SBD MOMSN=8002650
2018-03-10T07:18:20.618Z,1520666300.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:18:21.276Z,1520666301.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:18:21.279Z,1520666301.279 [Default:CheckIn:Read_Iridium] Stopped
2018-03-10T07:18:21.279Z,1520666301.279 [Default:CheckIn:C.Wait] Running Loop=1
2018-03-10T07:18:21.279Z,1520666301.279 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-03-10T07:18:21.469Z,1520666301.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:18:24.564Z,1520666304.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:18:24.724Z,1520666304.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:18:25.125Z,1520666305.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:18:25.508Z,1520666305.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:18:25.933Z,1520666305.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:18:26.306Z,1520666306.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:18:26.716Z,1520666306.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:18:27.119Z,1520666307.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:18:27.515Z,1520666307.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:18:27.907Z,1520666307.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:18:28.313Z,1520666308.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:18:28.721Z,1520666308.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:18:29.117Z,1520666309.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:18:29.515Z,1520666309.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:18:29.906Z,1520666309.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:18:30.309Z,1520666310.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:18:30.715Z,1520666310.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:18:31.120Z,1520666311.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:18:31.537Z,1520666311.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:18:31.907Z,1520666311.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:18:32.304Z,1520666312.304 [BPC1](ERROR): Bank B: No match for stick 4 serial number:1717 in the onboard configuration file.
2018-03-10T07:18:32.305Z,1520666312.305 [BPC1](ERROR): Failed to parse Bank B battery data
2018-03-10T07:18:32.305Z,1520666312.305 [BPC1] Data Fault, FailCount= 1
2018-03-10T07:18:32.305Z,1520666312.305 [BPC1](ERROR): Data Fault
2018-03-10T07:18:32.321Z,1520666312.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:18:32.403Z,1520666312.403 [CBIT](ERROR): Data Fault in component: BPC1
2018-03-10T07:18:32.725Z,1520666312.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:18:33.125Z,1520666313.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:18:33.521Z,1520666313.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:18:33.599Z,1520666313.599 [CBIT](INFO): Clearing failed state for component BPC1
2018-03-10T07:18:33.599Z,1520666313.599 [BPC1] No Fault, FailCount= 1
2018-03-10T07:18:33.965Z,1520666313.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:18:34.311Z,1520666314.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:18:34.714Z,1520666314.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:18:35.120Z,1520666315.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:18:35.517Z,1520666315.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:18:35.911Z,1520666315.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:18:36.309Z,1520666316.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:18:36.721Z,1520666316.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:18:37.119Z,1520666317.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:18:37.525Z,1520666317.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:18:37.894Z,1520666317.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:18:38.312Z,1520666318.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:18:38.725Z,1520666318.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:18:39.114Z,1520666319.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:18:39.545Z,1520666319.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:18:39.903Z,1520666319.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:18:40.317Z,1520666320.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:18:40.718Z,1520666320.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:18:41.125Z,1520666321.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:18:41.514Z,1520666321.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:18:41.918Z,1520666321.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:18:42.297Z,1520666322.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:18:42.715Z,1520666322.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:18:43.114Z,1520666323.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:18:43.529Z,1520666323.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:18:43.894Z,1520666323.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:18:44.317Z,1520666324.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:18:44.722Z,1520666324.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:18:45.115Z,1520666325.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:18:45.521Z,1520666325.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:18:45.898Z,1520666325.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:18:46.301Z,1520666326.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:18:46.721Z,1520666326.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:18:47.124Z,1520666327.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:18:47.522Z,1520666327.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:18:47.901Z,1520666327.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:18:48.298Z,1520666328.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:18:48.719Z,1520666328.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:18:49.127Z,1520666329.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:18:49.528Z,1520666329.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:18:49.904Z,1520666329.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:18:50.353Z,1520666330.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:18:50.737Z,1520666330.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:18:51.132Z,1520666331.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:18:51.508Z,1520666331.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:18:51.904Z,1520666331.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:18:52.298Z,1520666332.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:18:52.713Z,1520666332.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:18:53.107Z,1520666333.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:18:53.508Z,1520666333.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:18:53.903Z,1520666333.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:18:54.301Z,1520666334.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:18:54.705Z,1520666334.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:18:55.132Z,1520666335.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:18:55.506Z,1520666335.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:18:55.985Z,1520666335.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:18:56.303Z,1520666336.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:18:56.707Z,1520666336.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:18:57.132Z,1520666337.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:18:57.507Z,1520666337.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:18:57.952Z,1520666337.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:18:58.305Z,1520666338.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:18:58.707Z,1520666338.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:18:59.110Z,1520666339.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:18:59.507Z,1520666339.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:18:59.902Z,1520666339.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:19:00.309Z,1520666340.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:19:00.707Z,1520666340.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:19:01.113Z,1520666341.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:19:01.512Z,1520666341.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:19:01.948Z,1520666341.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:19:02.338Z,1520666342.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:19:02.710Z,1520666342.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:19:03.111Z,1520666343.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:19:03.509Z,1520666343.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:19:03.906Z,1520666343.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:19:04.299Z,1520666344.299 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:19:04.299Z,1520666344.299 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 41
2018-03-10T07:19:04.299Z,1520666344.299 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-03-10T07:19:04.301Z,1520666344.301 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:19:04.301Z,1520666344.301 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 41
2018-03-10T07:19:04.301Z,1520666344.301 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-03-10T07:19:04.303Z,1520666344.303 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:19:04.303Z,1520666344.303 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 41
2018-03-10T07:19:04.303Z,1520666344.303 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-10T07:19:04.379Z,1520666344.379 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-03-10T07:19:04.379Z,1520666344.379 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-03-10T07:19:04.380Z,1520666344.380 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-10T07:19:04.788Z,1520666344.788 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-03-10T07:19:04.788Z,1520666344.788 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 41
2018-03-10T07:19:04.788Z,1520666344.788 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-03-10T07:19:04.788Z,1520666344.788 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 41
2018-03-10T07:19:04.789Z,1520666344.789 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-10T07:19:04.789Z,1520666344.789 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 41
2018-03-10T07:19:05.112Z,1520666345.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-03-10T07:19:05.113Z,1520666345.113 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-03-10T07:19:05.113Z,1520666345.113 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-03-10T07:19:05.113Z,1520666345.113 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-03-10T07:19:05.114Z,1520666345.114 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-03-10T07:19:05.114Z,1520666345.114 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-03-10T07:19:05.115Z,1520666345.115 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-10T07:19:05.116Z,1520666345.116 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-10T07:19:05.116Z,1520666345.116 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-10T07:19:05.508Z,1520666345.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-03-10T07:19:05.509Z,1520666345.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:19:05.912Z,1520666345.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-03-10T07:19:05.913Z,1520666345.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:19:06.311Z,1520666346.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-03-10T07:19:06.312Z,1520666346.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:19:06.711Z,1520666346.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-03-10T07:19:06.712Z,1520666346.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:19:07.116Z,1520666347.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-03-10T07:19:07.117Z,1520666347.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:19:07.514Z,1520666347.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-03-10T07:19:07.515Z,1520666347.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:19:07.907Z,1520666347.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-03-10T07:19:07.908Z,1520666347.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:19:08.302Z,1520666348.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-03-10T07:19:08.304Z,1520666348.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:19:08.720Z,1520666348.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-03-10T07:19:08.721Z,1520666348.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:19:09.114Z,1520666349.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-03-10T07:19:09.115Z,1520666349.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:19:09.514Z,1520666349.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-03-10T07:19:09.515Z,1520666349.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:19:09.906Z,1520666349.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-03-10T07:19:09.907Z,1520666349.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:19:10.312Z,1520666350.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-03-10T07:19:10.313Z,1520666350.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:19:10.715Z,1520666350.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-03-10T07:19:10.716Z,1520666350.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:19:11.114Z,1520666351.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-03-10T07:19:11.115Z,1520666351.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:19:11.514Z,1520666351.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-03-10T07:19:11.516Z,1520666351.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:19:11.912Z,1520666351.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-03-10T07:19:11.913Z,1520666351.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:19:12.305Z,1520666352.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-03-10T07:19:12.306Z,1520666352.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:19:12.721Z,1520666352.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-03-10T07:19:12.722Z,1520666352.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:19:13.132Z,1520666353.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-03-10T07:19:13.133Z,1520666353.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:19:13.524Z,1520666353.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-03-10T07:19:13.525Z,1520666353.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:19:13.904Z,1520666353.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-03-10T07:19:13.905Z,1520666353.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:19:14.309Z,1520666354.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-03-10T07:19:14.310Z,1520666354.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:19:14.733Z,1520666354.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-03-10T07:19:14.734Z,1520666354.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:19:15.115Z,1520666355.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-03-10T07:19:15.116Z,1520666355.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:19:15.514Z,1520666355.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-03-10T07:19:15.516Z,1520666355.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:19:15.905Z,1520666355.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-03-10T07:19:15.906Z,1520666355.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:19:16.307Z,1520666356.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-03-10T07:19:16.308Z,1520666356.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:19:16.715Z,1520666356.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-03-10T07:19:16.716Z,1520666356.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:19:17.120Z,1520666357.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-03-10T07:19:17.121Z,1520666357.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:19:17.516Z,1520666357.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-03-10T07:19:17.516Z,1520666357.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:19:17.906Z,1520666357.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-03-10T07:19:17.907Z,1520666357.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:19:18.308Z,1520666358.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-03-10T07:19:18.309Z,1520666358.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:19:18.715Z,1520666358.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-03-10T07:19:18.716Z,1520666358.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:19:19.114Z,1520666359.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-03-10T07:19:19.115Z,1520666359.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:19:19.528Z,1520666359.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-03-10T07:19:19.529Z,1520666359.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:19:19.915Z,1520666359.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-03-10T07:19:19.916Z,1520666359.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:19:20.294Z,1520666360.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-03-10T07:19:20.311Z,1520666360.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:19:20.720Z,1520666360.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-03-10T07:19:20.721Z,1520666360.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:19:21.116Z,1520666361.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-03-10T07:19:21.117Z,1520666361.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:19:21.516Z,1520666361.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-03-10T07:19:21.517Z,1520666361.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:19:21.897Z,1520666361.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-03-10T07:19:21.898Z,1520666361.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:19:25.047Z,1520666365.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:19:25.241Z,1520666365.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:19:25.628Z,1520666365.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:19:26.023Z,1520666366.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:19:26.424Z,1520666366.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:19:26.833Z,1520666366.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:19:27.233Z,1520666367.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:19:27.597Z,1520666367.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:19:28.028Z,1520666368.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:19:28.423Z,1520666368.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:19:28.826Z,1520666368.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:19:29.205Z,1520666369.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:19:29.599Z,1520666369.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:19:30.000Z,1520666370.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:19:30.398Z,1520666370.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:19:30.825Z,1520666370.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:19:31.225Z,1520666371.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:19:31.628Z,1520666371.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:19:32.005Z,1520666372.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:19:32.401Z,1520666372.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:19:32.805Z,1520666372.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:19:33.200Z,1520666373.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:19:33.605Z,1520666373.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:19:34.026Z,1520666374.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:19:34.429Z,1520666374.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:19:34.825Z,1520666374.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:19:35.205Z,1520666375.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:19:35.598Z,1520666375.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:19:36.002Z,1520666376.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:19:36.428Z,1520666376.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:19:36.839Z,1520666376.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:19:37.229Z,1520666377.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:19:37.630Z,1520666377.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:19:38.009Z,1520666378.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:19:38.406Z,1520666378.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:19:38.816Z,1520666378.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:19:39.243Z,1520666379.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:19:39.641Z,1520666379.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:19:40.024Z,1520666380.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:19:40.425Z,1520666380.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:19:40.819Z,1520666380.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:19:41.220Z,1520666381.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:19:41.613Z,1520666381.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:19:42.009Z,1520666382.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:19:42.413Z,1520666382.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:19:42.822Z,1520666382.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:19:43.218Z,1520666383.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:19:43.624Z,1520666383.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:19:44.017Z,1520666384.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:19:44.408Z,1520666384.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:19:44.842Z,1520666384.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:19:45.221Z,1520666385.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:19:45.614Z,1520666385.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:19:46.029Z,1520666386.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:19:46.426Z,1520666386.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:19:46.825Z,1520666386.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:19:47.214Z,1520666387.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:19:47.617Z,1520666387.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:19:48.016Z,1520666388.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:19:48.434Z,1520666388.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:19:48.837Z,1520666388.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:19:49.226Z,1520666389.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:19:49.641Z,1520666389.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:19:50.010Z,1520666390.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:19:50.413Z,1520666390.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:19:50.813Z,1520666390.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:19:51.210Z,1520666391.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:19:51.640Z,1520666391.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:19:52.049Z,1520666392.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:19:52.416Z,1520666392.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:19:52.820Z,1520666392.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:19:53.213Z,1520666393.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:19:53.612Z,1520666393.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:19:54.013Z,1520666394.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:19:54.412Z,1520666394.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:19:54.813Z,1520666394.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:19:55.225Z,1520666395.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:19:55.625Z,1520666395.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:19:56.010Z,1520666396.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:19:56.413Z,1520666396.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:19:56.813Z,1520666396.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:19:57.211Z,1520666397.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:19:57.608Z,1520666397.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:19:58.029Z,1520666398.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:19:58.416Z,1520666398.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:19:58.825Z,1520666398.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:19:59.220Z,1520666399.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:19:59.613Z,1520666399.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:20:00.015Z,1520666400.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:20:00.429Z,1520666400.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:20:00.825Z,1520666400.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:20:01.225Z,1520666401.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:20:01.629Z,1520666401.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:20:02.015Z,1520666402.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:20:02.419Z,1520666402.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:20:02.798Z,1520666402.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:20:03.202Z,1520666403.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:20:03.598Z,1520666403.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:20:04.060Z,1520666404.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:20:04.429Z,1520666404.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:20:04.822Z,1520666404.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:20:05.203Z,1520666405.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:20:05.628Z,1520666405.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:20:06.002Z,1520666406.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:20:06.402Z,1520666406.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:20:06.823Z,1520666406.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:20:07.229Z,1520666407.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:20:07.627Z,1520666407.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:20:08.007Z,1520666408.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:20:08.413Z,1520666408.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:20:08.807Z,1520666408.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:20:09.205Z,1520666409.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:20:09.609Z,1520666409.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:20:10.053Z,1520666410.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:20:10.432Z,1520666410.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:20:10.811Z,1520666410.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:20:11.206Z,1520666411.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:20:11.612Z,1520666411.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:20:12.037Z,1520666412.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:20:12.407Z,1520666412.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:20:12.885Z,1520666412.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:20:13.211Z,1520666413.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:20:13.611Z,1520666413.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:20:14.006Z,1520666414.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:20:14.406Z,1520666414.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:20:14.812Z,1520666414.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:20:15.205Z,1520666415.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:20:15.607Z,1520666415.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:20:16.012Z,1520666416.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:20:16.421Z,1520666416.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:20:16.848Z,1520666416.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:20:17.208Z,1520666417.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:20:17.617Z,1520666417.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:20:18.010Z,1520666418.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:20:18.422Z,1520666418.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:20:18.829Z,1520666418.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:20:19.218Z,1520666419.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:20:19.620Z,1520666419.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:20:20.010Z,1520666420.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:20:20.417Z,1520666420.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:20:20.822Z,1520666420.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:20:21.206Z,1520666421.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:20:21.608Z,1520666421.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:20:22.019Z,1520666422.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:20:25.130Z,1520666425.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:20:25.329Z,1520666425.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:20:25.705Z,1520666425.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:20:26.079Z,1520666426.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:20:26.505Z,1520666426.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:20:26.902Z,1520666426.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:20:27.300Z,1520666427.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:20:27.705Z,1520666427.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:20:28.081Z,1520666428.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:20:28.477Z,1520666428.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:20:28.886Z,1520666428.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:20:29.317Z,1520666429.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:20:29.707Z,1520666429.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:20:30.094Z,1520666430.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:20:30.514Z,1520666430.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:20:30.885Z,1520666430.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:20:31.282Z,1520666431.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:20:31.682Z,1520666431.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:20:32.112Z,1520666432.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:20:32.494Z,1520666432.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:20:32.911Z,1520666432.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:20:33.285Z,1520666433.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:20:33.686Z,1520666433.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:20:34.088Z,1520666434.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:20:34.488Z,1520666434.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:20:34.890Z,1520666434.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:20:35.291Z,1520666435.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:20:35.691Z,1520666435.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:20:36.091Z,1520666436.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:20:36.505Z,1520666436.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:20:36.893Z,1520666436.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:20:37.287Z,1520666437.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:20:37.687Z,1520666437.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:20:38.093Z,1520666438.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:20:38.501Z,1520666438.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:20:38.895Z,1520666438.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:20:39.293Z,1520666439.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:20:39.685Z,1520666439.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:20:40.086Z,1520666440.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:20:40.488Z,1520666440.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:20:40.900Z,1520666440.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:20:41.327Z,1520666441.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:20:41.705Z,1520666441.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:20:42.093Z,1520666442.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:20:42.490Z,1520666442.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:20:42.893Z,1520666442.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:20:43.290Z,1520666443.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:20:43.689Z,1520666443.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:20:44.098Z,1520666444.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:20:44.497Z,1520666444.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:20:44.901Z,1520666444.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:20:45.282Z,1520666445.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:20:45.688Z,1520666445.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:20:46.092Z,1520666446.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:20:46.493Z,1520666446.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:20:46.897Z,1520666446.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:20:47.298Z,1520666447.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:20:47.697Z,1520666447.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:20:48.095Z,1520666448.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:20:48.509Z,1520666448.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:20:48.893Z,1520666448.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:20:49.287Z,1520666449.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:20:49.693Z,1520666449.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:20:50.105Z,1520666450.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:20:50.494Z,1520666450.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:20:50.921Z,1520666450.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:20:51.293Z,1520666451.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:20:51.686Z,1520666451.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:20:52.084Z,1520666452.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:20:52.486Z,1520666452.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:20:52.891Z,1520666452.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:20:53.312Z,1520666453.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:20:53.713Z,1520666453.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:20:54.113Z,1520666454.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:20:54.486Z,1520666454.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:20:54.893Z,1520666454.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:20:55.286Z,1520666455.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:20:55.686Z,1520666455.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:20:56.092Z,1520666456.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:20:56.491Z,1520666456.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:20:56.892Z,1520666456.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:20:57.288Z,1520666457.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:20:57.686Z,1520666457.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:20:58.093Z,1520666458.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:20:58.484Z,1520666458.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:20:58.890Z,1520666458.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:20:59.291Z,1520666459.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:20:59.691Z,1520666459.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:21:00.086Z,1520666460.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:21:00.490Z,1520666460.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:21:00.892Z,1520666460.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:21:01.315Z,1520666461.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:21:01.688Z,1520666461.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:21:02.091Z,1520666462.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:21:02.492Z,1520666462.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:21:02.892Z,1520666462.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:21:03.288Z,1520666463.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:21:03.686Z,1520666463.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:21:04.090Z,1520666464.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:21:04.488Z,1520666464.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:21:04.891Z,1520666464.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:21:05.291Z,1520666465.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:21:05.692Z,1520666465.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:21:06.092Z,1520666466.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:21:06.497Z,1520666466.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:21:06.881Z,1520666466.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:21:07.286Z,1520666467.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:21:07.688Z,1520666467.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:21:08.098Z,1520666468.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:21:08.497Z,1520666468.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:21:08.904Z,1520666468.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:21:09.286Z,1520666469.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:21:09.693Z,1520666469.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:21:10.090Z,1520666470.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:21:10.493Z,1520666470.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:21:10.898Z,1520666470.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:21:11.297Z,1520666471.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:21:11.698Z,1520666471.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:21:12.089Z,1520666472.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:21:12.488Z,1520666472.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:21:12.897Z,1520666472.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:21:13.296Z,1520666473.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:21:13.708Z,1520666473.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:21:14.099Z,1520666474.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:21:14.498Z,1520666474.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:21:14.899Z,1520666474.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:21:15.293Z,1520666475.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:21:15.695Z,1520666475.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:21:16.088Z,1520666476.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:21:16.493Z,1520666476.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:21:16.898Z,1520666476.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:21:17.298Z,1520666477.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:21:17.694Z,1520666477.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:21:18.095Z,1520666478.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:21:18.495Z,1520666478.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:21:18.905Z,1520666478.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:21:19.289Z,1520666479.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:21:19.689Z,1520666479.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:21:20.098Z,1520666480.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:21:20.498Z,1520666480.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:21:20.901Z,1520666480.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:21:21.293Z,1520666481.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:21:21.689Z,1520666481.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:21:22.093Z,1520666482.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:21:25.204Z,1520666485.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:21:25.378Z,1520666485.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:21:25.759Z,1520666485.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:21:26.169Z,1520666486.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:21:26.543Z,1520666486.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:21:26.942Z,1520666486.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:21:27.345Z,1520666487.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:21:27.751Z,1520666487.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:21:28.151Z,1520666488.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:21:28.551Z,1520666488.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:21:28.945Z,1520666488.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:21:29.344Z,1520666489.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:21:29.745Z,1520666489.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:21:30.140Z,1520666490.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:21:30.541Z,1520666490.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:21:30.951Z,1520666490.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:21:31.360Z,1520666491.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:21:31.765Z,1520666491.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:21:32.149Z,1520666492.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:21:32.542Z,1520666492.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:21:32.944Z,1520666492.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:21:33.349Z,1520666493.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:21:33.751Z,1520666493.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:21:34.151Z,1520666494.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:21:34.557Z,1520666494.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:21:34.945Z,1520666494.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:21:35.349Z,1520666495.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:21:35.742Z,1520666495.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:21:36.141Z,1520666496.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:21:36.530Z,1520666496.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:21:36.957Z,1520666496.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:21:37.361Z,1520666497.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:21:37.761Z,1520666497.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:21:38.151Z,1520666498.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:21:38.561Z,1520666498.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:21:38.960Z,1520666498.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:21:39.333Z,1520666499.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:21:39.756Z,1520666499.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:21:40.165Z,1520666500.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:21:40.559Z,1520666500.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:21:40.929Z,1520666500.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:21:41.337Z,1520666501.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:21:41.729Z,1520666501.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:21:42.137Z,1520666502.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:21:42.557Z,1520666502.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:21:42.958Z,1520666502.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:21:43.359Z,1520666503.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:21:43.768Z,1520666503.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:21:44.160Z,1520666504.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:21:44.537Z,1520666504.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:21:44.936Z,1520666504.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:21:45.363Z,1520666505.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:21:45.769Z,1520666505.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:21:46.171Z,1520666506.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:21:46.561Z,1520666506.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:21:46.949Z,1520666506.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:21:47.387Z,1520666507.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:21:47.754Z,1520666507.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:21:48.163Z,1520666508.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:21:48.564Z,1520666508.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:21:48.989Z,1520666508.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:21:49.365Z,1520666509.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:21:49.757Z,1520666509.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:21:50.160Z,1520666510.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:21:50.550Z,1520666510.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:21:50.945Z,1520666510.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:21:51.389Z,1520666511.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:21:51.785Z,1520666511.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:21:52.206Z,1520666512.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:21:52.583Z,1520666512.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:21:52.945Z,1520666512.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:21:53.341Z,1520666513.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:21:53.736Z,1520666513.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:21:54.139Z,1520666514.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:21:54.541Z,1520666514.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:21:54.950Z,1520666514.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:21:55.350Z,1520666515.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:21:55.753Z,1520666515.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:21:56.145Z,1520666516.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:21:56.553Z,1520666516.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:21:56.957Z,1520666516.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:21:57.325Z,1520666517.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:21:57.757Z,1520666517.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:21:58.155Z,1520666518.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:21:58.557Z,1520666518.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:21:58.929Z,1520666518.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:21:59.353Z,1520666519.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:21:59.755Z,1520666519.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:22:00.155Z,1520666520.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:22:00.553Z,1520666520.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:22:01.022Z,1520666521.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:22:01.355Z,1520666521.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:22:01.769Z,1520666521.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:22:02.158Z,1520666522.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:22:02.541Z,1520666522.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:22:02.951Z,1520666522.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:22:03.329Z,1520666523.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:22:03.801Z,1520666523.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:22:04.185Z,1520666524.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:22:04.559Z,1520666524.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:22:04.937Z,1520666524.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:22:05.334Z,1520666525.334 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:22:05.334Z,1520666525.334 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 42
2018-03-10T07:22:05.334Z,1520666525.334 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-03-10T07:22:05.336Z,1520666525.336 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:22:05.336Z,1520666525.336 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 42
2018-03-10T07:22:05.337Z,1520666525.337 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-03-10T07:22:05.338Z,1520666525.338 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:22:05.338Z,1520666525.338 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 42
2018-03-10T07:22:05.338Z,1520666525.338 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-10T07:22:05.433Z,1520666525.433 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-03-10T07:22:05.433Z,1520666525.433 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-03-10T07:22:05.434Z,1520666525.434 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-10T07:22:05.811Z,1520666525.811 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-03-10T07:22:05.811Z,1520666525.811 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 42
2018-03-10T07:22:05.812Z,1520666525.812 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-03-10T07:22:05.812Z,1520666525.812 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 42
2018-03-10T07:22:05.812Z,1520666525.812 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-10T07:22:05.812Z,1520666525.812 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 42
2018-03-10T07:22:06.137Z,1520666526.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-03-10T07:22:06.137Z,1520666526.137 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-03-10T07:22:06.138Z,1520666526.138 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-03-10T07:22:06.138Z,1520666526.138 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-03-10T07:22:06.138Z,1520666526.138 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-03-10T07:22:06.139Z,1520666526.139 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-03-10T07:22:06.139Z,1520666526.139 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-10T07:22:06.140Z,1520666526.140 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-10T07:22:06.140Z,1520666526.140 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-10T07:22:06.539Z,1520666526.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-03-10T07:22:06.540Z,1520666526.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:22:06.950Z,1520666526.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-03-10T07:22:06.967Z,1520666526.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:22:07.350Z,1520666527.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-03-10T07:22:07.367Z,1520666527.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:22:07.742Z,1520666527.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-03-10T07:22:07.744Z,1520666527.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:22:08.137Z,1520666528.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-03-10T07:22:08.138Z,1520666528.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:22:08.537Z,1520666528.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-03-10T07:22:08.538Z,1520666528.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:22:08.939Z,1520666528.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-03-10T07:22:08.940Z,1520666528.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:22:09.343Z,1520666529.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-03-10T07:22:09.344Z,1520666529.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:22:09.776Z,1520666529.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-03-10T07:22:09.777Z,1520666529.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:22:10.142Z,1520666530.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-03-10T07:22:10.143Z,1520666530.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:22:10.541Z,1520666530.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-03-10T07:22:10.541Z,1520666530.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:22:10.937Z,1520666530.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-03-10T07:22:10.938Z,1520666530.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:22:11.344Z,1520666531.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-03-10T07:22:11.345Z,1520666531.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:22:11.739Z,1520666531.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-03-10T07:22:11.740Z,1520666531.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:22:12.141Z,1520666532.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-03-10T07:22:12.142Z,1520666532.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:22:12.541Z,1520666532.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-03-10T07:22:12.542Z,1520666532.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:22:12.942Z,1520666532.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-03-10T07:22:12.943Z,1520666532.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:22:13.342Z,1520666533.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-03-10T07:22:13.343Z,1520666533.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:22:13.742Z,1520666533.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-03-10T07:22:13.743Z,1520666533.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:22:14.134Z,1520666534.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-03-10T07:22:14.135Z,1520666534.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:22:14.537Z,1520666534.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-03-10T07:22:14.538Z,1520666534.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:22:14.943Z,1520666534.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-03-10T07:22:14.944Z,1520666534.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:22:15.344Z,1520666535.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-03-10T07:22:15.345Z,1520666535.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:22:15.742Z,1520666535.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-03-10T07:22:15.744Z,1520666535.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:22:16.149Z,1520666536.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-03-10T07:22:16.150Z,1520666536.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:22:16.572Z,1520666536.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-03-10T07:22:16.572Z,1520666536.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:22:16.938Z,1520666536.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-03-10T07:22:16.939Z,1520666536.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:22:17.338Z,1520666537.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-03-10T07:22:17.339Z,1520666537.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:22:17.748Z,1520666537.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-03-10T07:22:17.749Z,1520666537.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:22:18.140Z,1520666538.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-03-10T07:22:18.141Z,1520666538.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:22:18.538Z,1520666538.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-03-10T07:22:18.539Z,1520666538.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:22:18.948Z,1520666538.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-03-10T07:22:18.949Z,1520666538.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:22:19.345Z,1520666539.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-03-10T07:22:19.346Z,1520666539.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:22:19.748Z,1520666539.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-03-10T07:22:19.749Z,1520666539.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:22:20.141Z,1520666540.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-03-10T07:22:20.142Z,1520666540.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:22:20.537Z,1520666540.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-03-10T07:22:20.538Z,1520666540.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:22:20.941Z,1520666540.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-03-10T07:22:20.942Z,1520666540.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:22:21.348Z,1520666541.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-03-10T07:22:21.349Z,1520666541.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:22:21.753Z,1520666541.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-03-10T07:22:21.754Z,1520666541.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:22:22.178Z,1520666542.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-03-10T07:22:22.180Z,1520666542.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:22:25.259Z,1520666545.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.9 s old, using for 20.0 s.
2018-03-10T07:22:25.260Z,1520666545.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:22:25.436Z,1520666545.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:22:25.809Z,1520666545.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:22:26.213Z,1520666546.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:22:26.613Z,1520666546.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:22:27.054Z,1520666547.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:22:27.418Z,1520666547.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:22:27.814Z,1520666547.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:22:28.216Z,1520666548.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:22:28.641Z,1520666548.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:22:29.012Z,1520666549.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:22:29.418Z,1520666549.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:22:29.820Z,1520666549.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:22:30.222Z,1520666550.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:22:30.625Z,1520666550.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:22:31.021Z,1520666551.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:22:31.411Z,1520666551.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:22:31.820Z,1520666551.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:22:32.218Z,1520666552.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:22:32.618Z,1520666552.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:22:33.021Z,1520666553.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:22:33.418Z,1520666553.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:22:33.810Z,1520666553.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:22:34.218Z,1520666554.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:22:34.631Z,1520666554.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:22:35.026Z,1520666555.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:22:35.422Z,1520666555.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:22:35.823Z,1520666555.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:22:36.211Z,1520666556.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:22:36.620Z,1520666556.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:22:37.017Z,1520666557.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:22:37.419Z,1520666557.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:22:37.832Z,1520666557.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:22:38.229Z,1520666558.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:22:38.656Z,1520666558.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:22:39.012Z,1520666559.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:22:39.410Z,1520666559.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:22:39.814Z,1520666559.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:22:40.213Z,1520666560.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:22:40.614Z,1520666560.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:22:41.041Z,1520666561.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:22:41.437Z,1520666561.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:22:41.858Z,1520666561.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:22:42.211Z,1520666562.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:22:42.614Z,1520666562.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:22:43.020Z,1520666563.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:22:43.417Z,1520666563.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:22:43.824Z,1520666563.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:22:44.232Z,1520666564.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:22:44.627Z,1520666564.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:22:45.029Z,1520666565.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:22:45.421Z,1520666565.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:22:45.811Z,1520666565.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:22:46.221Z,1520666566.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:22:46.620Z,1520666566.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:22:47.040Z,1520666567.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:22:47.433Z,1520666567.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:22:47.827Z,1520666567.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:22:48.221Z,1520666568.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:22:48.618Z,1520666568.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:22:49.019Z,1520666569.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:22:49.401Z,1520666569.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:22:49.832Z,1520666569.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:22:50.231Z,1520666570.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:22:50.635Z,1520666570.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:22:51.010Z,1520666571.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:22:51.405Z,1520666571.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:22:51.805Z,1520666571.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:22:52.206Z,1520666572.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:22:52.636Z,1520666572.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:22:53.049Z,1520666573.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:22:53.415Z,1520666573.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:22:53.815Z,1520666573.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:22:54.211Z,1520666574.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:22:54.610Z,1520666574.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:22:55.012Z,1520666575.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:22:55.411Z,1520666575.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:22:55.813Z,1520666575.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:22:56.215Z,1520666576.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:22:56.614Z,1520666576.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:22:57.016Z,1520666577.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:22:57.416Z,1520666577.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:22:57.811Z,1520666577.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:22:58.211Z,1520666578.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:22:58.611Z,1520666578.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:22:59.046Z,1520666579.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:22:59.451Z,1520666579.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:22:59.821Z,1520666579.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:23:00.217Z,1520666580.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:23:00.628Z,1520666580.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:23:01.014Z,1520666581.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:23:01.409Z,1520666581.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:23:01.823Z,1520666581.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:23:02.222Z,1520666582.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:23:02.620Z,1520666582.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:23:03.015Z,1520666583.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:23:03.413Z,1520666583.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:23:03.815Z,1520666583.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:23:04.212Z,1520666584.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:23:04.614Z,1520666584.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:23:05.047Z,1520666585.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:23:05.456Z,1520666585.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:23:05.851Z,1520666585.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:23:06.213Z,1520666586.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:23:06.617Z,1520666586.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:23:07.020Z,1520666587.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:23:07.412Z,1520666587.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:23:07.831Z,1520666587.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:23:08.220Z,1520666588.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:23:08.627Z,1520666588.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:23:09.011Z,1520666589.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:23:09.414Z,1520666589.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:23:09.814Z,1520666589.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:23:10.219Z,1520666590.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:23:10.612Z,1520666590.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:23:11.023Z,1520666591.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:23:11.436Z,1520666591.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:23:11.841Z,1520666591.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:23:12.211Z,1520666592.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:23:12.620Z,1520666592.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:23:13.017Z,1520666593.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:23:13.418Z,1520666593.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:23:13.816Z,1520666593.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:23:14.227Z,1520666594.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:23:14.627Z,1520666594.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:23:15.049Z,1520666595.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:23:15.433Z,1520666595.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:23:15.813Z,1520666595.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:23:16.214Z,1520666596.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:23:16.618Z,1520666596.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:23:17.023Z,1520666597.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:23:17.438Z,1520666597.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:23:17.845Z,1520666597.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:23:18.225Z,1520666598.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:23:18.597Z,1520666598.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:23:19.019Z,1520666599.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:23:19.418Z,1520666599.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:23:19.829Z,1520666599.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:23:20.229Z,1520666600.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:23:20.630Z,1520666600.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:23:21.002Z,1520666601.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:23:21.425Z,1520666601.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:23:21.802Z,1520666601.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:23:21.805Z,1520666601.805 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-03-10T07:23:21.805Z,1520666601.805 [Default:CheckIn:C.Wait] Stopped
2018-03-10T07:23:21.805Z,1520666601.805 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-03-10T07:23:21.805Z,1520666601.805 [Default:CheckIn:D] Running Loop=1
2018-03-10T07:23:22.223Z,1520666602.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:23:22.239Z,1520666602.239 [Default:CheckIn:D] Stopped
2018-03-10T07:23:22.239Z,1520666602.239 [Default:CheckIn:E] Running Loop=1
2018-03-10T07:23:25.343Z,1520666605.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:23:25.351Z,1520666605.351 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 124.071981 min 
2018-03-10T07:23:25.351Z,1520666605.351 [Default:CheckIn:E] Stopped
2018-03-10T07:23:25.351Z,1520666605.351 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-03-10T07:23:25.351Z,1520666605.351 [Default:CheckIn] Stopped
2018-03-10T07:23:25.351Z,1520666605.351 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-03-10T07:23:25.352Z,1520666605.352 [Default:CheckIn](INFO): Running loop #13
2018-03-10T07:23:25.352Z,1520666605.352 [Default:CheckIn] Running Loop=13
2018-03-10T07:23:25.352Z,1520666605.352 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-03-10T07:23:25.352Z,1520666605.352 [Default:CheckIn:Read_GPS] Running Loop=1
2018-03-10T07:23:25.547Z,1520666605.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:23:25.915Z,1520666605.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:23:26.317Z,1520666606.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:23:26.703Z,1520666606.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:23:27.102Z,1520666607.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:23:27.502Z,1520666607.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:23:27.911Z,1520666607.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:23:28.311Z,1520666608.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:23:28.714Z,1520666608.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:23:29.104Z,1520666609.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:23:29.500Z,1520666609.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:23:29.903Z,1520666609.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:23:30.308Z,1520666610.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:23:30.715Z,1520666610.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:23:31.115Z,1520666611.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:23:31.510Z,1520666611.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:23:31.903Z,1520666611.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:23:32.302Z,1520666612.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:23:32.703Z,1520666612.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:23:33.102Z,1520666613.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:23:33.503Z,1520666613.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:23:33.910Z,1520666613.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:23:34.316Z,1520666614.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:23:34.710Z,1520666614.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:23:35.111Z,1520666615.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:23:35.501Z,1520666615.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:23:35.907Z,1520666615.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:23:36.312Z,1520666616.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:23:36.713Z,1520666616.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:23:37.113Z,1520666617.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:23:37.517Z,1520666617.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:23:37.919Z,1520666617.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:23:38.293Z,1520666618.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:23:38.693Z,1520666618.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:23:39.093Z,1520666619.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:23:39.493Z,1520666619.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:23:39.915Z,1520666619.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:23:40.316Z,1520666620.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:23:40.718Z,1520666620.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:23:41.093Z,1520666621.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:23:41.492Z,1520666621.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:23:41.893Z,1520666621.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:23:42.293Z,1520666622.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:23:42.722Z,1520666622.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:23:43.117Z,1520666623.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:23:43.522Z,1520666623.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:23:43.900Z,1520666623.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:23:44.301Z,1520666624.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:23:44.694Z,1520666624.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:23:45.094Z,1520666625.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:23:45.501Z,1520666625.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:23:45.922Z,1520666625.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:23:46.320Z,1520666626.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:23:46.720Z,1520666626.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:23:47.125Z,1520666627.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:23:47.499Z,1520666627.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:23:47.927Z,1520666627.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:23:48.309Z,1520666628.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:23:48.737Z,1520666628.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:23:49.105Z,1520666629.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:23:49.513Z,1520666629.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:23:49.912Z,1520666629.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:23:50.313Z,1520666630.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:23:50.713Z,1520666630.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:23:51.128Z,1520666631.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:23:51.505Z,1520666631.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:23:51.917Z,1520666631.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:23:52.316Z,1520666632.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:23:52.717Z,1520666632.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:23:53.109Z,1520666633.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:23:53.493Z,1520666633.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:23:53.892Z,1520666633.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:23:54.291Z,1520666634.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:23:54.714Z,1520666634.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:23:55.112Z,1520666635.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:23:55.523Z,1520666635.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:23:55.916Z,1520666635.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:23:56.290Z,1520666636.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:23:56.693Z,1520666636.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:23:57.093Z,1520666637.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:23:57.490Z,1520666637.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:23:57.915Z,1520666637.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:23:58.324Z,1520666638.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:23:58.715Z,1520666638.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:23:59.090Z,1520666639.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:23:59.490Z,1520666639.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:23:59.887Z,1520666639.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:24:00.293Z,1520666640.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:24:00.718Z,1520666640.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:24:01.111Z,1520666641.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:24:01.510Z,1520666641.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:24:01.917Z,1520666641.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:24:02.289Z,1520666642.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:24:02.692Z,1520666642.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:24:03.092Z,1520666643.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:24:03.517Z,1520666643.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:24:03.914Z,1520666643.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:24:04.316Z,1520666644.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:24:04.714Z,1520666644.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:24:05.093Z,1520666645.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:24:05.494Z,1520666645.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:24:05.894Z,1520666645.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:24:06.293Z,1520666646.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:24:06.716Z,1520666646.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:24:07.114Z,1520666647.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:24:07.514Z,1520666647.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:24:07.888Z,1520666647.888 [BPC1](ERROR): Failed to receive battery data
2018-03-10T07:24:07.888Z,1520666647.888 [BPC1] Communications Fault, FailCount= 1
2018-03-10T07:24:07.888Z,1520666647.888 [BPC1](ERROR): Communications Fault
2018-03-10T07:24:07.896Z,1520666647.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:24:07.000Z,1520666648.000 [CBIT](ERROR): Communications Fault in component: BPC1
2018-03-10T07:24:08.293Z,1520666648.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:24:08.693Z,1520666648.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:24:09.097Z,1520666649.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:24:09.191Z,1520666649.191 [CBIT](INFO): Clearing failed state for component BPC1
2018-03-10T07:24:09.191Z,1520666649.191 [BPC1] No Fault, FailCount= 1
2018-03-10T07:24:09.541Z,1520666649.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:24:09.922Z,1520666649.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:24:10.319Z,1520666650.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:24:10.721Z,1520666650.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:24:11.093Z,1520666651.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:24:11.494Z,1520666651.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:24:11.897Z,1520666651.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:24:12.293Z,1520666652.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:24:12.711Z,1520666652.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:24:13.122Z,1520666653.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:24:13.520Z,1520666653.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:24:13.893Z,1520666653.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:24:14.295Z,1520666654.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:24:14.698Z,1520666654.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:24:15.100Z,1520666655.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:24:15.505Z,1520666655.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:24:15.913Z,1520666655.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:24:16.306Z,1520666656.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:24:16.705Z,1520666656.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:24:17.097Z,1520666657.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:24:17.503Z,1520666657.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:24:17.898Z,1520666657.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:24:18.298Z,1520666658.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:24:18.706Z,1520666658.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:24:19.107Z,1520666659.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:24:19.506Z,1520666659.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:24:19.905Z,1520666659.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:24:20.298Z,1520666660.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:24:20.697Z,1520666660.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:24:21.101Z,1520666661.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:24:21.505Z,1520666661.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:24:21.913Z,1520666661.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:24:22.308Z,1520666662.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:24:25.486Z,1520666665.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:24:25.637Z,1520666665.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:24:26.034Z,1520666666.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:24:26.414Z,1520666666.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:24:26.859Z,1520666666.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:24:27.241Z,1520666667.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:24:27.641Z,1520666667.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:24:28.035Z,1520666668.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:24:28.414Z,1520666668.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:24:28.821Z,1520666668.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:24:29.218Z,1520666669.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:24:29.618Z,1520666669.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:24:30.041Z,1520666670.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:24:30.439Z,1520666670.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:24:30.840Z,1520666670.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:24:31.214Z,1520666671.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:24:31.618Z,1520666671.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:24:32.019Z,1520666672.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:24:32.414Z,1520666672.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:24:32.840Z,1520666672.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:24:33.240Z,1520666673.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:24:33.641Z,1520666673.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:24:34.027Z,1520666674.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:24:34.426Z,1520666674.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:24:34.826Z,1520666674.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:24:35.224Z,1520666675.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:24:35.626Z,1520666675.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:24:36.031Z,1520666676.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:24:36.430Z,1520666676.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:24:36.831Z,1520666676.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:24:37.226Z,1520666677.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:24:37.622Z,1520666677.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:24:38.025Z,1520666678.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:24:38.420Z,1520666678.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:24:38.830Z,1520666678.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:24:39.231Z,1520666679.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:24:39.624Z,1520666679.624 [BPC1](FAULT): Failed to initialize
2018-03-10T07:24:39.624Z,1520666679.624 [BPC1] Communications Fault, FailCount= 2
2018-03-10T07:24:39.625Z,1520666679.625 [BPC1](ERROR): Communications Fault
2018-03-10T07:24:39.632Z,1520666679.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:24:39.735Z,1520666679.735 [CBIT](ERROR): Communications Fault in component: BPC1
2018-03-10T07:24:40.026Z,1520666680.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:24:40.423Z,1520666680.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:24:40.822Z,1520666680.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:24:40.903Z,1520666680.903 [CBIT](INFO): Clearing failed state for component BPC1
2018-03-10T07:24:40.903Z,1520666680.903 [BPC1] No Fault, FailCount= 2
2018-03-10T07:24:41.277Z,1520666681.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:24:41.623Z,1520666681.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:24:42.037Z,1520666682.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:24:42.434Z,1520666682.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:24:42.841Z,1520666682.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:24:43.233Z,1520666683.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:24:43.622Z,1520666683.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:24:44.026Z,1520666684.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:24:44.426Z,1520666684.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:24:44.834Z,1520666684.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:24:45.236Z,1520666685.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:24:45.632Z,1520666685.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:24:46.022Z,1520666686.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:24:46.424Z,1520666686.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:24:46.822Z,1520666686.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:24:47.225Z,1520666687.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:24:47.624Z,1520666687.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:24:48.037Z,1520666688.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:24:48.441Z,1520666688.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:24:48.841Z,1520666688.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:24:49.226Z,1520666689.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:24:49.623Z,1520666689.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:24:50.033Z,1520666690.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:24:50.426Z,1520666690.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:24:50.835Z,1520666690.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:24:51.235Z,1520666691.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:24:51.634Z,1520666691.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:24:52.022Z,1520666692.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:24:52.423Z,1520666692.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:24:52.821Z,1520666692.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:24:53.223Z,1520666693.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:24:53.626Z,1520666693.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:24:54.034Z,1520666694.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:24:54.434Z,1520666694.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:24:54.841Z,1520666694.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:24:55.225Z,1520666695.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:24:55.623Z,1520666695.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:24:56.025Z,1520666696.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:24:56.425Z,1520666696.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:24:56.841Z,1520666696.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:24:57.235Z,1520666697.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:24:57.631Z,1520666697.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:24:58.025Z,1520666698.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:24:58.423Z,1520666698.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:24:58.826Z,1520666698.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:24:59.222Z,1520666699.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:24:59.628Z,1520666699.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:25:00.041Z,1520666700.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:25:00.434Z,1520666700.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:25:00.835Z,1520666700.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:25:01.225Z,1520666701.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:25:01.623Z,1520666701.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:25:02.033Z,1520666702.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:25:02.422Z,1520666702.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:25:02.861Z,1520666702.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:25:03.241Z,1520666703.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:25:03.637Z,1520666703.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:25:04.022Z,1520666704.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:25:04.425Z,1520666704.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:25:04.826Z,1520666704.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:25:05.226Z,1520666705.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:25:05.623Z,1520666705.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:25:06.034Z,1520666706.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:25:06.434Z,1520666706.434 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:25:06.434Z,1520666706.434 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 43
2018-03-10T07:25:06.434Z,1520666706.434 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-03-10T07:25:06.436Z,1520666706.436 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:25:06.436Z,1520666706.436 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 43
2018-03-10T07:25:06.436Z,1520666706.436 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-03-10T07:25:06.438Z,1520666706.438 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:25:06.438Z,1520666706.438 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 43
2018-03-10T07:25:06.438Z,1520666706.438 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-10T07:25:06.527Z,1520666706.527 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-03-10T07:25:06.527Z,1520666706.527 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-03-10T07:25:06.528Z,1520666706.528 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-10T07:25:06.920Z,1520666706.920 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-03-10T07:25:06.920Z,1520666706.920 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 43
2018-03-10T07:25:06.921Z,1520666706.921 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-03-10T07:25:06.921Z,1520666706.921 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 43
2018-03-10T07:25:06.921Z,1520666706.921 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-10T07:25:06.921Z,1520666706.921 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 43
2018-03-10T07:25:07.223Z,1520666707.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-03-10T07:25:07.224Z,1520666707.224 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-03-10T07:25:07.224Z,1520666707.224 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-03-10T07:25:07.224Z,1520666707.224 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-03-10T07:25:07.225Z,1520666707.225 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-03-10T07:25:07.225Z,1520666707.225 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-03-10T07:25:07.225Z,1520666707.225 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-10T07:25:07.226Z,1520666707.226 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-10T07:25:07.226Z,1520666707.226 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-10T07:25:07.613Z,1520666707.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-03-10T07:25:07.614Z,1520666707.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:25:08.014Z,1520666708.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-03-10T07:25:08.015Z,1520666708.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:25:08.414Z,1520666708.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-03-10T07:25:08.415Z,1520666708.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:25:08.842Z,1520666708.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-03-10T07:25:08.843Z,1520666708.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:25:09.242Z,1520666709.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-03-10T07:25:09.247Z,1520666709.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:25:09.645Z,1520666709.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-03-10T07:25:09.646Z,1520666709.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:25:10.018Z,1520666710.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-03-10T07:25:10.018Z,1520666710.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:25:10.417Z,1520666710.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-03-10T07:25:10.418Z,1520666710.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:25:10.817Z,1520666710.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-03-10T07:25:10.818Z,1520666710.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:25:11.219Z,1520666711.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-03-10T07:25:11.220Z,1520666711.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:25:11.611Z,1520666711.611 [BPC1](FAULT): Failed to initialize
2018-03-10T07:25:11.612Z,1520666711.612 [BPC1] Communications Fault, FailCount= 3
2018-03-10T07:25:11.612Z,1520666711.612 [BPC1](ERROR): Communications Fault
2018-03-10T07:25:11.618Z,1520666711.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-03-10T07:25:11.619Z,1520666711.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:25:11.715Z,1520666711.715 [CBIT](ERROR): Communications Fault in component: BPC1
2018-03-10T07:25:12.047Z,1520666712.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-03-10T07:25:12.048Z,1520666712.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:25:12.446Z,1520666712.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-03-10T07:25:12.447Z,1520666712.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:25:12.849Z,1520666712.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-03-10T07:25:12.850Z,1520666712.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:25:12.935Z,1520666712.935 [CBIT](INFO): Clearing failed state for component BPC1
2018-03-10T07:25:12.935Z,1520666712.935 [BPC1] No Fault, FailCount= 3
2018-03-10T07:25:13.280Z,1520666713.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-03-10T07:25:13.281Z,1520666713.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:25:13.623Z,1520666713.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-03-10T07:25:13.624Z,1520666713.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:25:14.024Z,1520666714.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-03-10T07:25:14.025Z,1520666714.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:25:14.418Z,1520666714.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-03-10T07:25:14.419Z,1520666714.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:25:14.828Z,1520666714.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-03-10T07:25:14.829Z,1520666714.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:25:15.248Z,1520666715.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-03-10T07:25:15.248Z,1520666715.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:25:15.628Z,1520666715.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-03-10T07:25:15.629Z,1520666715.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:25:16.023Z,1520666716.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-03-10T07:25:16.024Z,1520666716.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:25:16.431Z,1520666716.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-03-10T07:25:16.432Z,1520666716.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:25:16.818Z,1520666716.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-03-10T07:25:16.820Z,1520666716.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:25:17.229Z,1520666717.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-03-10T07:25:17.230Z,1520666717.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:25:17.623Z,1520666717.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-03-10T07:25:17.624Z,1520666717.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:25:18.037Z,1520666718.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-03-10T07:25:18.038Z,1520666718.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:25:18.429Z,1520666718.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-03-10T07:25:18.430Z,1520666718.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:25:18.831Z,1520666718.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-03-10T07:25:18.832Z,1520666718.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:25:19.225Z,1520666719.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-03-10T07:25:19.226Z,1520666719.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:25:19.622Z,1520666719.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-03-10T07:25:19.622Z,1520666719.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:25:20.033Z,1520666720.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-03-10T07:25:20.034Z,1520666720.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:25:20.425Z,1520666720.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-03-10T07:25:20.426Z,1520666720.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:25:20.836Z,1520666720.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-03-10T07:25:20.837Z,1520666720.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:25:21.230Z,1520666721.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-03-10T07:25:21.231Z,1520666721.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:25:21.631Z,1520666721.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-03-10T07:25:21.632Z,1520666721.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:25:22.024Z,1520666722.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-03-10T07:25:22.025Z,1520666722.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:25:22.432Z,1520666722.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-03-10T07:25:22.433Z,1520666722.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:25:25.521Z,1520666725.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.1 s old, using for 20.0 s.
2018-03-10T07:25:25.522Z,1520666725.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:25:25.672Z,1520666725.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2018-03-10T07:25:25.673Z,1520666725.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:25:26.078Z,1520666726.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2018-03-10T07:25:26.079Z,1520666726.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:25:26.468Z,1520666726.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:25:26.539Z,1520666726.539 [CBIT](DEBUG): EFC running - data check-sum false
2018-03-10T07:25:26.877Z,1520666726.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:25:27.264Z,1520666727.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:25:27.664Z,1520666727.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:25:28.062Z,1520666728.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:25:28.463Z,1520666728.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:25:28.877Z,1520666728.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:25:29.271Z,1520666729.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:25:29.671Z,1520666729.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:25:30.062Z,1520666730.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:25:30.468Z,1520666730.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:25:30.866Z,1520666730.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:25:31.267Z,1520666731.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:25:31.651Z,1520666731.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:25:32.074Z,1520666732.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:25:32.481Z,1520666732.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:25:32.874Z,1520666732.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:25:33.277Z,1520666733.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:25:33.650Z,1520666733.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:25:34.057Z,1520666734.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:25:34.455Z,1520666734.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:25:34.878Z,1520666734.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:25:35.278Z,1520666735.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:25:35.678Z,1520666735.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:25:36.049Z,1520666736.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:25:36.457Z,1520666736.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:25:36.848Z,1520666736.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:25:37.277Z,1520666737.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:25:37.653Z,1520666737.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:25:38.082Z,1520666738.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:25:38.481Z,1520666738.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:25:38.882Z,1520666738.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:25:39.253Z,1520666739.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:25:39.649Z,1520666739.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:25:40.054Z,1520666740.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:25:40.453Z,1520666740.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:25:40.869Z,1520666740.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:25:41.283Z,1520666741.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:25:41.684Z,1520666741.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:25:42.054Z,1520666742.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:25:42.457Z,1520666742.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:25:42.856Z,1520666742.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:25:43.259Z,1520666743.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:25:43.650Z,1520666743.650 [BPC1](FAULT): Failed to initialize
2018-03-10T07:25:43.650Z,1520666743.650 [BPC1] Communications Fault, FailCount= 4
2018-03-10T07:25:43.650Z,1520666743.650 [BPC1](ERROR): Communications Fault
2018-03-10T07:25:43.657Z,1520666743.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:25:43.743Z,1520666743.743 [CBIT](ERROR): Communications Fault in component: BPC1
2018-03-10T07:25:44.084Z,1520666744.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:25:44.482Z,1520666744.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:25:44.859Z,1520666744.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:25:44.982Z,1520666744.982 [CBIT](INFO): Clearing failed state for component BPC1
2018-03-10T07:25:44.982Z,1520666744.982 [BPC1] No Fault, FailCount= 4
2018-03-10T07:25:45.393Z,1520666745.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:25:45.660Z,1520666745.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:25:46.068Z,1520666746.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:25:46.488Z,1520666746.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:25:46.873Z,1520666746.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:25:47.273Z,1520666747.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:25:47.684Z,1520666747.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:25:48.063Z,1520666748.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:25:48.507Z,1520666748.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:25:48.916Z,1520666748.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:25:49.279Z,1520666749.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:25:49.669Z,1520666749.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:25:50.080Z,1520666750.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:25:50.470Z,1520666750.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:25:50.870Z,1520666750.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:25:51.264Z,1520666751.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:25:51.663Z,1520666751.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:25:52.061Z,1520666752.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:25:52.468Z,1520666752.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:25:52.872Z,1520666752.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:25:53.270Z,1520666753.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:25:53.676Z,1520666753.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:25:54.062Z,1520666754.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:25:54.464Z,1520666754.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:25:54.850Z,1520666754.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:25:55.251Z,1520666755.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:25:55.650Z,1520666755.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:25:56.071Z,1520666756.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:25:56.480Z,1520666756.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:25:56.874Z,1520666756.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:25:57.278Z,1520666757.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:25:57.651Z,1520666757.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:25:58.050Z,1520666758.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:25:58.479Z,1520666758.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:25:58.872Z,1520666758.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:25:59.273Z,1520666759.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:25:59.674Z,1520666759.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:26:00.049Z,1520666760.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:26:00.449Z,1520666760.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:26:00.878Z,1520666760.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:26:01.250Z,1520666761.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:26:01.649Z,1520666761.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:26:02.073Z,1520666762.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:26:02.474Z,1520666762.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:26:02.874Z,1520666762.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:26:03.280Z,1520666763.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:26:03.681Z,1520666763.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:26:04.050Z,1520666764.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:26:04.456Z,1520666764.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:26:04.874Z,1520666764.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:26:05.275Z,1520666765.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:26:05.675Z,1520666765.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:26:06.055Z,1520666766.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:26:06.451Z,1520666766.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:26:06.850Z,1520666766.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:26:07.278Z,1520666767.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:26:07.650Z,1520666767.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:26:08.096Z,1520666768.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:26:08.479Z,1520666768.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:26:08.877Z,1520666768.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:26:09.254Z,1520666769.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:26:09.650Z,1520666769.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:26:10.055Z,1520666770.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:26:10.449Z,1520666770.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:26:10.879Z,1520666770.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:26:11.275Z,1520666771.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:26:11.679Z,1520666771.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:26:12.057Z,1520666772.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:26:12.449Z,1520666772.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:26:12.850Z,1520666772.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:26:13.256Z,1520666773.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:26:13.688Z,1520666773.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:26:14.087Z,1520666774.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:26:14.455Z,1520666774.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:26:14.866Z,1520666774.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:26:15.254Z,1520666775.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:26:15.657Z,1520666775.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:26:16.058Z,1520666776.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:26:16.458Z,1520666776.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:26:16.887Z,1520666776.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:26:17.270Z,1520666777.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:26:17.687Z,1520666777.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:26:18.061Z,1520666778.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:26:18.458Z,1520666778.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:26:18.859Z,1520666778.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:26:19.261Z,1520666779.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:26:19.658Z,1520666779.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:26:20.097Z,1520666780.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:26:20.489Z,1520666780.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:26:20.902Z,1520666780.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:26:21.265Z,1520666781.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:26:21.665Z,1520666781.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:26:22.061Z,1520666782.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:26:22.461Z,1520666782.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:26:25.642Z,1520666785.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:26:25.873Z,1520666785.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:26:26.207Z,1520666786.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:26:26.593Z,1520666786.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:26:26.995Z,1520666786.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:26:27.405Z,1520666787.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:26:27.803Z,1520666787.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:26:28.203Z,1520666788.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:26:28.604Z,1520666788.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:26:28.995Z,1520666788.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:26:29.395Z,1520666789.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:26:29.796Z,1520666789.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:26:30.201Z,1520666790.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:26:30.594Z,1520666790.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:26:31.008Z,1520666791.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:26:31.405Z,1520666791.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:26:31.804Z,1520666791.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:26:32.202Z,1520666792.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:26:32.607Z,1520666792.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:26:33.001Z,1520666793.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:26:33.382Z,1520666793.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:26:33.804Z,1520666793.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:26:34.206Z,1520666794.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:26:34.606Z,1520666794.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:26:34.982Z,1520666794.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:26:35.384Z,1520666795.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:26:35.782Z,1520666795.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:26:36.181Z,1520666796.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:26:36.581Z,1520666796.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:26:37.015Z,1520666797.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:26:37.409Z,1520666797.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:26:37.794Z,1520666797.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:26:38.193Z,1520666798.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:26:38.585Z,1520666798.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:26:38.993Z,1520666798.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:26:39.385Z,1520666799.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:26:39.819Z,1520666799.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:26:40.202Z,1520666800.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:26:40.619Z,1520666800.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:26:40.991Z,1520666800.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:26:41.389Z,1520666801.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:26:41.791Z,1520666801.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:26:42.197Z,1520666802.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:26:42.590Z,1520666802.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:26:42.995Z,1520666802.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:26:43.399Z,1520666803.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:26:43.801Z,1520666803.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:26:44.191Z,1520666804.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:26:44.597Z,1520666804.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:26:45.002Z,1520666805.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:26:45.409Z,1520666805.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:26:45.798Z,1520666805.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:26:46.205Z,1520666806.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:26:46.605Z,1520666806.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:26:47.001Z,1520666807.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:26:47.395Z,1520666807.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:26:47.791Z,1520666807.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:26:48.199Z,1520666808.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:26:48.609Z,1520666808.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:26:49.003Z,1520666809.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:26:49.402Z,1520666809.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:26:49.809Z,1520666809.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:26:50.193Z,1520666810.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:26:50.594Z,1520666810.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:26:50.991Z,1520666810.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:26:51.392Z,1520666811.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:26:51.802Z,1520666811.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:26:52.205Z,1520666812.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:26:52.606Z,1520666812.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:26:52.999Z,1520666812.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:26:53.398Z,1520666813.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:26:53.782Z,1520666813.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:26:54.205Z,1520666814.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:26:54.589Z,1520666814.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:26:55.013Z,1520666815.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:26:55.417Z,1520666815.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:26:55.812Z,1520666815.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:26:56.182Z,1520666816.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:26:56.613Z,1520666816.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:26:56.983Z,1520666816.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:26:57.412Z,1520666817.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:26:57.814Z,1520666817.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:26:58.214Z,1520666818.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:26:58.612Z,1520666818.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:26:58.982Z,1520666818.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:26:59.385Z,1520666819.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:26:59.796Z,1520666819.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:27:00.197Z,1520666820.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:27:00.589Z,1520666820.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:27:01.021Z,1520666821.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:27:01.419Z,1520666821.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:27:01.794Z,1520666821.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:27:02.190Z,1520666822.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:27:02.585Z,1520666822.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:27:02.992Z,1520666822.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:27:03.397Z,1520666823.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:27:03.794Z,1520666823.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:27:04.194Z,1520666824.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:27:04.595Z,1520666824.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:27:04.992Z,1520666824.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:27:05.389Z,1520666825.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:27:05.791Z,1520666825.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:27:06.197Z,1520666826.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:27:06.589Z,1520666826.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:27:06.995Z,1520666826.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:27:07.398Z,1520666827.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:27:07.798Z,1520666827.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:27:08.197Z,1520666828.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:27:08.597Z,1520666828.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:27:08.994Z,1520666828.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:27:09.391Z,1520666829.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:27:09.798Z,1520666829.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:27:10.204Z,1520666830.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:27:10.654Z,1520666830.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:27:11.005Z,1520666831.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:27:11.389Z,1520666831.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:27:11.790Z,1520666831.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:27:12.201Z,1520666832.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:27:12.591Z,1520666832.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:27:13.002Z,1520666833.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:27:13.398Z,1520666833.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:27:13.801Z,1520666833.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:27:14.193Z,1520666834.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:27:14.595Z,1520666834.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:27:14.991Z,1520666834.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:27:15.390Z,1520666835.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:27:15.809Z,1520666835.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:27:16.201Z,1520666836.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:27:16.602Z,1520666836.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:27:16.995Z,1520666836.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:27:17.389Z,1520666837.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:27:17.801Z,1520666837.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:27:18.197Z,1520666838.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:27:18.589Z,1520666838.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:27:19.010Z,1520666839.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:27:19.406Z,1520666839.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:27:19.802Z,1520666839.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:27:20.193Z,1520666840.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:27:20.597Z,1520666840.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:27:20.993Z,1520666840.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:27:21.393Z,1520666841.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:27:21.802Z,1520666841.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:27:22.209Z,1520666842.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:27:22.641Z,1520666842.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:27:25.709Z,1520666845.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:27:25.865Z,1520666845.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:27:26.260Z,1520666846.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:27:26.662Z,1520666846.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:27:27.063Z,1520666847.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:27:27.453Z,1520666847.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:27:27.849Z,1520666847.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:27:28.265Z,1520666848.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:27:28.673Z,1520666848.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:27:29.062Z,1520666849.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:27:29.457Z,1520666849.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:27:29.864Z,1520666849.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:27:30.252Z,1520666850.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:27:30.651Z,1520666850.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:27:31.053Z,1520666851.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:27:31.465Z,1520666851.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:27:31.865Z,1520666851.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:27:32.269Z,1520666852.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:27:32.665Z,1520666852.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:27:33.051Z,1520666853.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:27:33.477Z,1520666853.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:27:33.873Z,1520666853.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:27:34.248Z,1520666854.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:27:34.672Z,1520666854.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:27:35.073Z,1520666855.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:27:35.458Z,1520666855.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:27:35.859Z,1520666855.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:27:36.268Z,1520666856.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:27:36.638Z,1520666856.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:27:37.041Z,1520666857.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:27:37.436Z,1520666857.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:27:37.863Z,1520666857.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:27:38.269Z,1520666858.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:27:38.669Z,1520666858.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:27:39.041Z,1520666859.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:27:39.468Z,1520666859.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:27:39.843Z,1520666859.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:27:40.243Z,1520666860.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:27:40.641Z,1520666860.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:27:41.074Z,1520666861.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:27:41.473Z,1520666861.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:27:41.870Z,1520666861.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:27:42.239Z,1520666862.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:27:42.666Z,1520666862.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:27:43.044Z,1520666863.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:27:43.442Z,1520666863.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:27:43.871Z,1520666863.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:27:44.273Z,1520666864.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:27:44.673Z,1520666864.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:27:45.080Z,1520666865.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:27:45.440Z,1520666865.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:27:45.863Z,1520666865.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:27:46.282Z,1520666866.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:27:46.692Z,1520666866.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:27:47.080Z,1520666867.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:27:47.469Z,1520666867.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:27:47.877Z,1520666867.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:27:48.249Z,1520666868.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:27:48.644Z,1520666868.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:27:49.057Z,1520666869.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:27:49.446Z,1520666869.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:27:49.876Z,1520666869.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:27:50.265Z,1520666870.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:27:50.674Z,1520666870.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:27:51.092Z,1520666871.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:27:51.465Z,1520666871.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:27:51.851Z,1520666871.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:27:52.261Z,1520666872.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:27:52.648Z,1520666872.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:27:53.059Z,1520666873.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:27:53.456Z,1520666873.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:27:53.860Z,1520666873.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:27:54.249Z,1520666874.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:27:54.648Z,1520666874.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:27:55.045Z,1520666875.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:27:55.457Z,1520666875.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:27:55.863Z,1520666875.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:27:56.269Z,1520666876.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:27:56.652Z,1520666876.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:27:57.054Z,1520666877.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:27:57.429Z,1520666877.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:27:57.855Z,1520666877.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:27:58.255Z,1520666878.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:27:58.657Z,1520666878.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:27:59.004Z,1520666879.004 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-03-10T07:27:59.005Z,1520666879.005 [NAL9602] Data Fault, FailCount= 3
2018-03-10T07:27:59.005Z,1520666879.005 [NAL9602](ERROR): Data Fault
2018-03-10T07:27:59.064Z,1520666879.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:27:59.144Z,1520666879.144 [CBIT](ERROR): Data Fault in component: NAL9602
2018-03-10T07:27:59.404Z,1520666879.404 [NAL9602](INFO): Powering down
2018-03-10T07:27:59.457Z,1520666879.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:27:59.836Z,1520666879.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:28:00.272Z,1520666880.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:28:00.348Z,1520666880.348 [CBIT](INFO): Clearing failed state for component NAL9602
2018-03-10T07:28:00.348Z,1520666880.348 [NAL9602] No Fault, FailCount= 3
2018-03-10T07:28:00.659Z,1520666880.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:28:01.037Z,1520666881.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:28:01.439Z,1520666881.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:28:01.864Z,1520666881.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:28:02.235Z,1520666882.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:28:02.638Z,1520666882.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:28:03.037Z,1520666883.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:28:03.479Z,1520666883.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:28:03.884Z,1520666883.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:28:04.238Z,1520666884.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:28:04.636Z,1520666884.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:28:05.068Z,1520666885.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:28:05.438Z,1520666885.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:28:05.838Z,1520666885.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:28:06.241Z,1520666886.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:28:06.664Z,1520666886.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:28:07.036Z,1520666887.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:28:07.460Z,1520666887.460 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:28:07.460Z,1520666887.460 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 44
2018-03-10T07:28:07.460Z,1520666887.460 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-03-10T07:28:07.462Z,1520666887.462 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:28:07.462Z,1520666887.462 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 44
2018-03-10T07:28:07.462Z,1520666887.462 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-03-10T07:28:07.468Z,1520666887.468 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:28:07.468Z,1520666887.468 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 44
2018-03-10T07:28:07.468Z,1520666887.468 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-10T07:28:07.551Z,1520666887.551 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-03-10T07:28:07.551Z,1520666887.551 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-03-10T07:28:07.552Z,1520666887.552 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-10T07:28:07.952Z,1520666887.952 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-03-10T07:28:07.952Z,1520666887.952 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 44
2018-03-10T07:28:07.953Z,1520666887.953 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-03-10T07:28:07.953Z,1520666887.953 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 44
2018-03-10T07:28:07.953Z,1520666887.953 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-10T07:28:07.953Z,1520666887.953 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 44
2018-03-10T07:28:08.257Z,1520666888.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-03-10T07:28:08.257Z,1520666888.257 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-03-10T07:28:08.258Z,1520666888.258 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-03-10T07:28:08.258Z,1520666888.258 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-03-10T07:28:08.259Z,1520666888.259 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-03-10T07:28:08.259Z,1520666888.259 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-03-10T07:28:08.260Z,1520666888.260 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-10T07:28:08.260Z,1520666888.260 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-10T07:28:08.260Z,1520666888.260 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-10T07:28:08.672Z,1520666888.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-03-10T07:28:08.673Z,1520666888.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:28:09.072Z,1520666889.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-03-10T07:28:09.073Z,1520666889.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:28:09.448Z,1520666889.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-03-10T07:28:09.448Z,1520666889.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:28:09.871Z,1520666889.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-03-10T07:28:09.872Z,1520666889.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:28:10.246Z,1520666890.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-03-10T07:28:10.248Z,1520666890.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:28:10.644Z,1520666890.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-03-10T07:28:10.645Z,1520666890.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:28:11.047Z,1520666891.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-03-10T07:28:11.048Z,1520666891.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:28:11.471Z,1520666891.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-03-10T07:28:11.472Z,1520666891.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:28:11.848Z,1520666891.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-03-10T07:28:11.848Z,1520666891.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:28:12.245Z,1520666892.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-03-10T07:28:12.246Z,1520666892.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:28:12.646Z,1520666892.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-03-10T07:28:12.647Z,1520666892.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:28:13.050Z,1520666893.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-03-10T07:28:13.051Z,1520666893.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:28:13.446Z,1520666893.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-03-10T07:28:13.447Z,1520666893.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:28:13.844Z,1520666893.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-03-10T07:28:13.845Z,1520666893.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:28:14.241Z,1520666894.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-03-10T07:28:14.242Z,1520666894.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:28:14.671Z,1520666894.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-03-10T07:28:14.672Z,1520666894.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:28:15.045Z,1520666895.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-03-10T07:28:15.046Z,1520666895.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:28:15.444Z,1520666895.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-03-10T07:28:15.445Z,1520666895.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:28:15.891Z,1520666895.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-03-10T07:28:15.923Z,1520666895.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:28:16.270Z,1520666896.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-03-10T07:28:16.271Z,1520666896.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:28:16.645Z,1520666896.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-03-10T07:28:16.646Z,1520666896.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:28:17.047Z,1520666897.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-03-10T07:28:17.048Z,1520666897.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:28:17.447Z,1520666897.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-03-10T07:28:17.448Z,1520666897.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:28:17.868Z,1520666897.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-03-10T07:28:17.869Z,1520666897.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:28:18.246Z,1520666898.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-03-10T07:28:18.248Z,1520666898.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:28:18.694Z,1520666898.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-03-10T07:28:18.699Z,1520666898.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:28:19.064Z,1520666899.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-03-10T07:28:19.065Z,1520666899.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:28:19.460Z,1520666899.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-03-10T07:28:19.461Z,1520666899.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:28:19.854Z,1520666899.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-03-10T07:28:19.854Z,1520666899.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:28:20.261Z,1520666900.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-03-10T07:28:20.261Z,1520666900.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:28:20.648Z,1520666900.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-03-10T07:28:20.649Z,1520666900.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:28:21.060Z,1520666901.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-03-10T07:28:21.061Z,1520666901.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:28:21.449Z,1520666901.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-03-10T07:28:21.450Z,1520666901.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:28:21.850Z,1520666901.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-03-10T07:28:21.851Z,1520666901.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:28:22.247Z,1520666902.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-03-10T07:28:22.248Z,1520666902.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:28:22.657Z,1520666902.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-03-10T07:28:22.658Z,1520666902.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:28:25.752Z,1520666905.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.3 s old, using for 20.0 s.
2018-03-10T07:28:25.753Z,1520666905.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:28:25.756Z,1520666905.756 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-03-10T07:23:25.4Z
2018-03-10T07:28:25.756Z,1520666905.756 [Default:CheckIn:Read_GPS] Stopped
2018-03-10T07:28:25.756Z,1520666905.756 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-03-10T07:28:25.887Z,1520666905.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2018-03-10T07:28:25.888Z,1520666905.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:28:26.387Z,1520666906.387 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20180310T051512/Courier0052.lzma
2018-03-10T07:28:26.422Z,1520666906.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.0 s old, using for 20.0 s.
2018-03-10T07:28:26.447Z,1520666906.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:28:26.699Z,1520666906.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2018-03-10T07:28:26.700Z,1520666906.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:28:27.099Z,1520666907.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2018-03-10T07:28:27.100Z,1520666907.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:28:27.447Z,1520666907.447 [DataOverHttps](INFO): Moved sent file to Logs/20180310T051512/Courier0052.lzma.bak
2018-03-10T07:28:27.447Z,1520666907.447 [DataOverHttps](INFO): SBD MOMSN=8002711
2018-03-10T07:28:27.505Z,1520666907.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:28:28.153Z,1520666908.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:28:28.298Z,1520666908.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:28:28.706Z,1520666908.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:28:31.771Z,1520666911.771 [NAL9602](INFO): Powering up NAL9602
2018-03-10T07:28:31.830Z,1520666911.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:28:32.017Z,1520666912.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:28:32.394Z,1520666912.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:28:32.783Z,1520666912.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:28:33.186Z,1520666913.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:28:33.584Z,1520666913.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:28:34.005Z,1520666914.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:28:37.114Z,1520666917.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:28:37.267Z,1520666917.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:28:37.620Z,1520666917.620 [DataOverHttps](INFO): Sending 167 bytes from file Logs/20180310T051512/Express0053.lzma
2018-03-10T07:28:37.674Z,1520666917.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:28:38.065Z,1520666918.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:28:38.409Z,1520666918.409 [DataOverHttps](INFO): Moved sent file to Logs/20180310T051512/Express0053.lzma.bak
2018-03-10T07:28:38.409Z,1520666918.409 [DataOverHttps](INFO): SBD MOMSN=8002713
2018-03-10T07:28:38.473Z,1520666918.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:28:39.128Z,1520666919.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:28:39.132Z,1520666919.132 [Default:CheckIn:Read_Iridium] Stopped
2018-03-10T07:28:39.132Z,1520666919.132 [Default:CheckIn:C.Wait] Running Loop=1
2018-03-10T07:28:39.132Z,1520666919.132 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-03-10T07:28:39.275Z,1520666919.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:28:39.673Z,1520666919.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:28:42.789Z,1520666922.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:28:43.008Z,1520666923.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:28:43.325Z,1520666923.325 [NAL9602](INFO): NAL9602 initialized
2018-03-10T07:28:43.371Z,1520666923.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:28:43.765Z,1520666923.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:28:44.186Z,1520666924.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:28:44.574Z,1520666924.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:28:44.975Z,1520666924.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:28:45.366Z,1520666925.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:28:45.764Z,1520666925.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:28:46.168Z,1520666926.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:28:46.575Z,1520666926.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:28:46.975Z,1520666926.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:28:47.375Z,1520666927.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:28:47.767Z,1520666927.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:28:48.167Z,1520666928.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:28:48.568Z,1520666928.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:28:48.970Z,1520666928.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:28:49.368Z,1520666929.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:28:49.781Z,1520666929.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:28:50.181Z,1520666930.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:28:50.582Z,1520666930.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:28:50.977Z,1520666930.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:28:51.372Z,1520666931.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:28:51.773Z,1520666931.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:28:52.172Z,1520666932.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:28:52.580Z,1520666932.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:28:52.977Z,1520666932.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:28:53.377Z,1520666933.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:28:53.779Z,1520666933.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:28:54.181Z,1520666934.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:28:54.571Z,1520666934.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:28:54.954Z,1520666934.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:28:55.361Z,1520666935.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:28:55.774Z,1520666935.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:28:56.166Z,1520666936.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:28:56.566Z,1520666936.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:28:57.042Z,1520666937.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:28:57.356Z,1520666937.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:28:57.761Z,1520666937.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:28:58.156Z,1520666938.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:28:58.568Z,1520666938.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:28:58.966Z,1520666938.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:28:59.373Z,1520666939.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:28:59.793Z,1520666939.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:29:00.165Z,1520666940.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:29:00.572Z,1520666940.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:29:00.966Z,1520666940.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:29:01.362Z,1520666941.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:29:01.773Z,1520666941.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:29:02.174Z,1520666942.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:29:02.574Z,1520666942.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:29:02.969Z,1520666942.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:29:03.373Z,1520666943.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:29:03.785Z,1520666943.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:29:04.169Z,1520666944.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:29:04.571Z,1520666944.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:29:04.974Z,1520666944.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:29:05.380Z,1520666945.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:29:05.785Z,1520666945.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:29:06.169Z,1520666946.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:29:06.569Z,1520666946.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:29:06.962Z,1520666946.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:29:07.363Z,1520666947.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:29:07.780Z,1520666947.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:29:08.178Z,1520666948.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:29:08.581Z,1520666948.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:29:08.969Z,1520666948.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:29:09.365Z,1520666949.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:29:09.769Z,1520666949.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:29:10.164Z,1520666950.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:29:10.575Z,1520666950.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:29:10.975Z,1520666950.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:29:11.380Z,1520666951.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:29:11.769Z,1520666951.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:29:12.173Z,1520666952.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:29:12.567Z,1520666952.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:29:12.965Z,1520666952.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:29:13.362Z,1520666953.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:29:13.774Z,1520666953.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:29:14.175Z,1520666954.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:29:14.575Z,1520666954.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:29:14.973Z,1520666954.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:29:15.367Z,1520666955.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:29:15.765Z,1520666955.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:29:16.173Z,1520666956.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:29:16.616Z,1520666956.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:29:16.982Z,1520666956.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:29:17.389Z,1520666957.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:29:17.773Z,1520666957.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:29:18.170Z,1520666958.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:29:18.554Z,1520666958.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:29:18.953Z,1520666958.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:29:19.357Z,1520666959.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:29:19.784Z,1520666959.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:29:20.175Z,1520666960.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:29:20.581Z,1520666960.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:29:20.981Z,1520666960.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:29:21.377Z,1520666961.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:29:21.757Z,1520666961.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:29:22.185Z,1520666962.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:29:22.575Z,1520666962.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:29:22.979Z,1520666962.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:29:23.383Z,1520666963.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:29:23.754Z,1520666963.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:29:24.184Z,1520666964.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:29:24.556Z,1520666964.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:29:24.957Z,1520666964.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:29:25.381Z,1520666965.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:29:25.780Z,1520666965.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:29:26.183Z,1520666966.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:29:26.579Z,1520666966.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:29:26.985Z,1520666966.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:29:27.361Z,1520666967.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:29:27.761Z,1520666967.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:29:28.182Z,1520666968.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:29:28.639Z,1520666968.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:29:28.985Z,1520666968.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:29:29.387Z,1520666969.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:29:29.754Z,1520666969.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:29:30.157Z,1520666970.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:29:30.558Z,1520666970.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:29:30.962Z,1520666970.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:29:31.358Z,1520666971.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:29:31.787Z,1520666971.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:29:32.175Z,1520666972.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:29:32.586Z,1520666972.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:29:32.958Z,1520666972.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:29:33.353Z,1520666973.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:29:33.757Z,1520666973.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:29:34.157Z,1520666974.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:29:34.583Z,1520666974.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:29:34.970Z,1520666974.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:29:35.373Z,1520666975.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:29:35.761Z,1520666975.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:29:36.162Z,1520666976.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:29:36.563Z,1520666976.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:29:36.962Z,1520666976.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:29:37.365Z,1520666977.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:29:37.767Z,1520666977.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:29:38.167Z,1520666978.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:29:38.566Z,1520666978.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:29:38.963Z,1520666978.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:29:39.369Z,1520666979.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:29:39.793Z,1520666979.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:29:42.878Z,1520666982.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:29:43.069Z,1520666983.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:29:43.466Z,1520666983.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:29:43.863Z,1520666983.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:29:44.257Z,1520666984.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:29:44.652Z,1520666984.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:29:45.055Z,1520666985.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:29:45.462Z,1520666985.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:29:45.863Z,1520666985.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:29:46.311Z,1520666986.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:29:46.681Z,1520666986.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:29:47.042Z,1520666987.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:29:47.473Z,1520666987.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:29:47.877Z,1520666987.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:29:48.246Z,1520666988.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:29:48.670Z,1520666988.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:29:49.063Z,1520666989.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:29:49.459Z,1520666989.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:29:49.868Z,1520666989.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:29:50.267Z,1520666990.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:29:50.673Z,1520666990.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:29:51.088Z,1520666991.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:29:51.461Z,1520666991.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:29:51.863Z,1520666991.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:29:52.266Z,1520666992.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:29:52.657Z,1520666992.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:29:53.052Z,1520666993.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:29:53.451Z,1520666993.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:29:53.857Z,1520666993.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:29:54.254Z,1520666994.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:29:54.662Z,1520666994.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:29:55.070Z,1520666995.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:29:55.481Z,1520666995.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:29:55.864Z,1520666995.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:29:56.261Z,1520666996.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:29:56.650Z,1520666996.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:29:57.064Z,1520666997.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:29:57.462Z,1520666997.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:29:57.864Z,1520666997.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:29:58.265Z,1520666998.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:29:58.665Z,1520666998.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:29:59.052Z,1520666999.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:29:59.458Z,1520666999.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:29:59.841Z,1520666999.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:30:00.265Z,1520667000.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:30:00.664Z,1520667000.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:30:01.060Z,1520667001.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:30:01.458Z,1520667001.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:30:01.886Z,1520667001.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:30:02.269Z,1520667002.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:30:02.645Z,1520667002.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:30:03.044Z,1520667003.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:30:03.467Z,1520667003.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:30:03.864Z,1520667003.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:30:04.266Z,1520667004.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:30:04.665Z,1520667004.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:30:05.072Z,1520667005.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:30:05.450Z,1520667005.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:30:05.845Z,1520667005.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:30:06.249Z,1520667006.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:30:06.676Z,1520667006.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:30:07.066Z,1520667007.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:30:07.473Z,1520667007.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:30:07.867Z,1520667007.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:30:08.273Z,1520667008.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:30:08.646Z,1520667008.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:30:09.044Z,1520667009.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:30:09.472Z,1520667009.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:30:09.873Z,1520667009.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:30:10.266Z,1520667010.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:30:10.642Z,1520667010.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:30:11.067Z,1520667011.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:30:11.457Z,1520667011.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:30:11.846Z,1520667011.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:30:12.249Z,1520667012.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:30:12.657Z,1520667012.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:30:13.069Z,1520667013.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:30:13.473Z,1520667013.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:30:13.842Z,1520667013.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:30:14.244Z,1520667014.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:30:14.657Z,1520667014.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:30:15.045Z,1520667015.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:30:15.452Z,1520667015.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:30:15.891Z,1520667015.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:30:16.273Z,1520667016.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:30:16.664Z,1520667016.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:30:17.053Z,1520667017.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:30:17.451Z,1520667017.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:30:17.876Z,1520667017.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:30:18.251Z,1520667018.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:30:18.661Z,1520667018.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:30:19.057Z,1520667019.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:30:19.481Z,1520667019.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:30:19.873Z,1520667019.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:30:20.256Z,1520667020.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:30:20.683Z,1520667020.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:30:21.065Z,1520667021.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:30:21.461Z,1520667021.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:30:21.882Z,1520667021.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:30:22.265Z,1520667022.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:30:22.681Z,1520667022.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:30:23.080Z,1520667023.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:30:23.449Z,1520667023.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:30:23.854Z,1520667023.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:30:24.285Z,1520667024.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:30:24.688Z,1520667024.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:30:25.062Z,1520667025.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:30:25.458Z,1520667025.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:30:25.865Z,1520667025.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:30:26.252Z,1520667026.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:30:26.658Z,1520667026.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:30:27.049Z,1520667027.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:30:27.462Z,1520667027.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:30:27.861Z,1520667027.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:30:28.272Z,1520667028.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:30:28.653Z,1520667028.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:30:29.054Z,1520667029.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:30:29.461Z,1520667029.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:30:29.852Z,1520667029.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:30:30.249Z,1520667030.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:30:30.671Z,1520667030.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:30:31.085Z,1520667031.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:30:31.462Z,1520667031.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:30:31.856Z,1520667031.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:30:32.272Z,1520667032.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:30:32.675Z,1520667032.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:30:33.073Z,1520667033.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:30:33.465Z,1520667033.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:30:33.866Z,1520667033.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:30:34.266Z,1520667034.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:30:34.643Z,1520667034.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:30:35.045Z,1520667035.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:30:35.464Z,1520667035.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:30:35.865Z,1520667035.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:30:36.245Z,1520667036.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:30:36.673Z,1520667036.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:30:37.063Z,1520667037.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:30:37.481Z,1520667037.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:30:37.845Z,1520667037.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:30:38.241Z,1520667038.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:30:38.669Z,1520667038.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:30:39.046Z,1520667039.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:30:39.464Z,1520667039.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:30:39.866Z,1520667039.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:30:43.018Z,1520667043.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:30:43.185Z,1520667043.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:30:43.571Z,1520667043.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:30:43.971Z,1520667043.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:30:44.371Z,1520667044.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:30:44.787Z,1520667044.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:30:45.201Z,1520667045.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:30:45.584Z,1520667045.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:30:45.973Z,1520667045.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:30:46.380Z,1520667046.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:30:46.777Z,1520667046.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:30:47.157Z,1520667047.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:30:47.584Z,1520667047.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:30:47.981Z,1520667047.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:30:48.380Z,1520667048.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:30:48.758Z,1520667048.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:30:49.157Z,1520667049.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:30:49.565Z,1520667049.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:30:49.962Z,1520667049.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:30:50.369Z,1520667050.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:30:50.791Z,1520667050.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:30:51.178Z,1520667051.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:30:51.570Z,1520667051.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:30:51.965Z,1520667051.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:30:52.366Z,1520667052.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:30:52.767Z,1520667052.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:30:53.166Z,1520667053.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:30:53.571Z,1520667053.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:30:53.978Z,1520667053.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:30:54.377Z,1520667054.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:30:54.768Z,1520667054.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:30:55.168Z,1520667055.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:30:55.573Z,1520667055.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:30:56.004Z,1520667056.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:30:56.366Z,1520667056.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:30:56.785Z,1520667056.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:30:57.203Z,1520667057.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:30:57.605Z,1520667057.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:30:57.966Z,1520667057.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:30:58.377Z,1520667058.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:30:58.769Z,1520667058.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:30:59.166Z,1520667059.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:30:59.579Z,1520667059.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:30:59.977Z,1520667059.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:31:00.377Z,1520667060.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:31:00.769Z,1520667060.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:31:01.172Z,1520667061.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:31:01.565Z,1520667061.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:31:01.969Z,1520667061.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:31:02.369Z,1520667062.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:31:02.777Z,1520667062.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:31:03.185Z,1520667063.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:31:03.578Z,1520667063.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:31:03.969Z,1520667063.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:31:04.372Z,1520667064.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:31:04.770Z,1520667064.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:31:05.167Z,1520667065.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:31:05.585Z,1520667065.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:31:05.986Z,1520667065.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:31:06.379Z,1520667066.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:31:06.770Z,1520667066.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:31:07.171Z,1520667067.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:31:07.571Z,1520667067.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:31:07.981Z,1520667067.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:31:08.385Z,1520667068.385 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:31:08.385Z,1520667068.385 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 45
2018-03-10T07:31:08.385Z,1520667068.385 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-03-10T07:31:08.387Z,1520667068.387 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:31:08.387Z,1520667068.387 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 45
2018-03-10T07:31:08.387Z,1520667068.387 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-03-10T07:31:08.389Z,1520667068.389 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:31:08.389Z,1520667068.389 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 45
2018-03-10T07:31:08.389Z,1520667068.389 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-10T07:31:08.463Z,1520667068.463 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-03-10T07:31:08.463Z,1520667068.463 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-03-10T07:31:08.464Z,1520667068.464 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-10T07:31:08.863Z,1520667068.863 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-03-10T07:31:08.863Z,1520667068.863 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 45
2018-03-10T07:31:08.863Z,1520667068.863 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-03-10T07:31:08.864Z,1520667068.864 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 45
2018-03-10T07:31:08.864Z,1520667068.864 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-10T07:31:08.864Z,1520667068.864 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 45
2018-03-10T07:31:09.186Z,1520667069.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-03-10T07:31:09.187Z,1520667069.187 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-03-10T07:31:09.187Z,1520667069.187 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-03-10T07:31:09.187Z,1520667069.187 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-03-10T07:31:09.188Z,1520667069.188 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-03-10T07:31:09.188Z,1520667069.188 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-03-10T07:31:09.189Z,1520667069.189 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-10T07:31:09.189Z,1520667069.189 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-10T07:31:09.189Z,1520667069.189 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-10T07:31:09.592Z,1520667069.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-03-10T07:31:09.593Z,1520667069.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:31:09.968Z,1520667069.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-03-10T07:31:09.968Z,1520667069.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:31:10.398Z,1520667070.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-03-10T07:31:10.399Z,1520667070.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:31:10.769Z,1520667070.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-03-10T07:31:10.770Z,1520667070.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:31:11.166Z,1520667071.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-03-10T07:31:11.167Z,1520667071.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:31:11.599Z,1520667071.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-03-10T07:31:11.600Z,1520667071.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:31:11.975Z,1520667071.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-03-10T07:31:11.976Z,1520667071.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:31:12.370Z,1520667072.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-03-10T07:31:12.371Z,1520667072.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:31:12.766Z,1520667072.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-03-10T07:31:12.767Z,1520667072.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:31:13.161Z,1520667073.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-03-10T07:31:13.162Z,1520667073.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:31:13.572Z,1520667073.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-03-10T07:31:13.573Z,1520667073.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:31:13.968Z,1520667073.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-03-10T07:31:13.969Z,1520667073.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:31:14.361Z,1520667074.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-03-10T07:31:14.362Z,1520667074.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:31:14.770Z,1520667074.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-03-10T07:31:14.771Z,1520667074.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:31:15.176Z,1520667075.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-03-10T07:31:15.177Z,1520667075.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:31:15.571Z,1520667075.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-03-10T07:31:15.572Z,1520667075.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:31:15.965Z,1520667075.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-03-10T07:31:15.966Z,1520667075.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:31:16.366Z,1520667076.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-03-10T07:31:16.367Z,1520667076.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:31:16.767Z,1520667076.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-03-10T07:31:16.768Z,1520667076.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:31:17.172Z,1520667077.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-03-10T07:31:17.173Z,1520667077.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:31:17.570Z,1520667077.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-03-10T07:31:17.571Z,1520667077.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:31:17.974Z,1520667077.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-03-10T07:31:17.975Z,1520667077.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:31:18.371Z,1520667078.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-03-10T07:31:18.372Z,1520667078.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:31:18.772Z,1520667078.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-03-10T07:31:18.773Z,1520667078.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:31:19.166Z,1520667079.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-03-10T07:31:19.167Z,1520667079.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:31:19.565Z,1520667079.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-03-10T07:31:19.566Z,1520667079.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:31:19.969Z,1520667079.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-03-10T07:31:19.969Z,1520667079.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:31:20.380Z,1520667080.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-03-10T07:31:20.381Z,1520667080.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:31:20.777Z,1520667080.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-03-10T07:31:20.778Z,1520667080.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:31:21.185Z,1520667081.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-03-10T07:31:21.186Z,1520667081.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:31:21.574Z,1520667081.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-03-10T07:31:21.575Z,1520667081.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:31:21.965Z,1520667081.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-03-10T07:31:21.966Z,1520667081.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:31:22.368Z,1520667082.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-03-10T07:31:22.369Z,1520667082.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:31:22.776Z,1520667082.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-03-10T07:31:22.776Z,1520667082.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:31:23.185Z,1520667083.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-03-10T07:31:23.186Z,1520667083.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:31:23.578Z,1520667083.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-03-10T07:31:23.579Z,1520667083.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:31:23.981Z,1520667083.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-03-10T07:31:23.981Z,1520667083.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:31:24.385Z,1520667084.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-03-10T07:31:24.386Z,1520667084.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:31:24.764Z,1520667084.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-03-10T07:31:24.765Z,1520667084.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:31:25.169Z,1520667085.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-03-10T07:31:25.170Z,1520667085.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:31:25.566Z,1520667085.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-03-10T07:31:25.567Z,1520667085.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:31:25.967Z,1520667085.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-03-10T07:31:25.968Z,1520667085.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:31:26.367Z,1520667086.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-03-10T07:31:26.368Z,1520667086.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:31:26.778Z,1520667086.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2018-03-10T07:31:26.779Z,1520667086.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:31:27.182Z,1520667087.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2018-03-10T07:31:27.182Z,1520667087.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:31:27.577Z,1520667087.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2018-03-10T07:31:27.578Z,1520667087.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:31:27.968Z,1520667087.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2018-03-10T07:31:27.969Z,1520667087.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:31:28.372Z,1520667088.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 20.0 s old, using for 20.0 s.
2018-03-10T07:31:28.373Z,1520667088.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:31:28.767Z,1520667088.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:31:29.167Z,1520667089.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:31:29.579Z,1520667089.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:31:29.985Z,1520667089.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:31:30.379Z,1520667090.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:31:30.772Z,1520667090.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:31:31.168Z,1520667091.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:31:31.567Z,1520667091.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:31:31.967Z,1520667091.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:31:32.374Z,1520667092.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:31:32.809Z,1520667092.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:31:33.185Z,1520667093.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:31:33.579Z,1520667093.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:31:33.971Z,1520667093.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:31:34.373Z,1520667094.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:31:34.773Z,1520667094.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:31:35.178Z,1520667095.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:31:35.593Z,1520667095.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:31:35.985Z,1520667095.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:31:36.379Z,1520667096.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:31:36.768Z,1520667096.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:31:37.161Z,1520667097.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:31:37.565Z,1520667097.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:31:37.961Z,1520667097.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:31:38.361Z,1520667098.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:31:38.782Z,1520667098.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:31:39.184Z,1520667099.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:31:39.582Z,1520667099.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:31:39.985Z,1520667099.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:31:43.111Z,1520667103.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:31:43.296Z,1520667103.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:31:43.690Z,1520667103.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:31:44.092Z,1520667104.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:31:44.488Z,1520667104.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:31:44.869Z,1520667104.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:31:45.296Z,1520667105.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:31:45.674Z,1520667105.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:31:46.104Z,1520667106.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:31:46.505Z,1520667106.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:31:46.898Z,1520667106.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:31:47.297Z,1520667107.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:31:47.703Z,1520667107.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:31:48.104Z,1520667108.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:31:48.509Z,1520667108.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:31:48.913Z,1520667108.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:31:49.268Z,1520667109.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:31:49.698Z,1520667109.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:31:50.089Z,1520667110.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:31:50.493Z,1520667110.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:31:50.875Z,1520667110.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:31:51.274Z,1520667111.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:31:51.673Z,1520667111.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:31:52.075Z,1520667112.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:31:52.484Z,1520667112.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:31:52.886Z,1520667112.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:31:53.283Z,1520667113.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:31:53.674Z,1520667113.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:31:54.073Z,1520667114.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:31:54.476Z,1520667114.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:31:54.873Z,1520667114.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:31:55.281Z,1520667115.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:31:55.684Z,1520667115.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:31:56.086Z,1520667116.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:31:56.489Z,1520667116.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:31:56.874Z,1520667116.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:31:57.274Z,1520667117.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:31:57.682Z,1520667117.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:31:58.079Z,1520667118.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:31:58.485Z,1520667118.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:31:58.881Z,1520667118.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:31:59.293Z,1520667119.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:31:59.677Z,1520667119.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:32:00.075Z,1520667120.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:32:00.482Z,1520667120.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:32:00.892Z,1520667120.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:32:01.280Z,1520667121.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:32:01.681Z,1520667121.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:32:02.085Z,1520667122.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:32:02.482Z,1520667122.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:32:02.877Z,1520667122.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:32:03.284Z,1520667123.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:32:03.658Z,1520667123.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:32:04.062Z,1520667124.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:32:04.483Z,1520667124.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:32:04.882Z,1520667124.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:32:05.296Z,1520667125.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:32:05.675Z,1520667125.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:32:06.086Z,1520667126.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:32:06.461Z,1520667126.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:32:06.945Z,1520667126.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:32:07.261Z,1520667127.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:32:07.685Z,1520667127.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:32:08.094Z,1520667128.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:32:08.484Z,1520667128.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:32:08.862Z,1520667128.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:32:09.262Z,1520667129.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:32:09.663Z,1520667129.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:32:10.084Z,1520667130.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:32:10.509Z,1520667130.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:32:10.889Z,1520667130.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:32:11.293Z,1520667131.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:32:11.693Z,1520667131.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:32:12.061Z,1520667132.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:32:12.465Z,1520667132.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:32:12.868Z,1520667132.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:32:13.293Z,1520667133.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:32:13.695Z,1520667133.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:32:14.099Z,1520667134.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:32:14.478Z,1520667134.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:32:14.865Z,1520667134.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:32:15.277Z,1520667135.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:32:15.667Z,1520667135.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:32:16.065Z,1520667136.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:32:16.499Z,1520667136.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:32:16.870Z,1520667136.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:32:17.274Z,1520667137.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:32:17.671Z,1520667137.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:32:18.109Z,1520667138.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:32:18.470Z,1520667138.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:32:18.871Z,1520667138.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:32:19.309Z,1520667139.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:32:19.674Z,1520667139.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:32:20.082Z,1520667140.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:32:20.499Z,1520667140.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:32:20.870Z,1520667140.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:32:21.280Z,1520667141.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:32:21.674Z,1520667141.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:32:22.070Z,1520667142.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:32:22.485Z,1520667142.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:32:22.909Z,1520667142.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:32:23.289Z,1520667143.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:32:23.671Z,1520667143.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:32:24.077Z,1520667144.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:32:24.469Z,1520667144.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:32:24.877Z,1520667144.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:32:25.288Z,1520667145.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:32:25.709Z,1520667145.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:32:26.083Z,1520667146.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:32:26.478Z,1520667146.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:32:26.879Z,1520667146.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:32:27.275Z,1520667147.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:32:27.673Z,1520667147.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:32:28.072Z,1520667148.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:32:28.483Z,1520667148.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:32:28.878Z,1520667148.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:32:29.283Z,1520667149.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:32:29.673Z,1520667149.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:32:30.077Z,1520667150.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:32:30.479Z,1520667150.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:32:30.872Z,1520667150.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:32:31.271Z,1520667151.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:32:31.682Z,1520667151.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:32:32.083Z,1520667152.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:32:32.482Z,1520667152.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:32:32.877Z,1520667152.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:32:33.273Z,1520667153.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:32:33.673Z,1520667153.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:32:34.073Z,1520667154.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:32:34.489Z,1520667154.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:32:34.894Z,1520667154.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:32:35.312Z,1520667155.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:32:35.674Z,1520667155.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:32:36.072Z,1520667156.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:32:36.481Z,1520667156.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:32:36.882Z,1520667156.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:32:37.274Z,1520667157.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:32:37.683Z,1520667157.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:32:38.091Z,1520667158.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:32:38.520Z,1520667158.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:32:38.872Z,1520667158.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:32:39.277Z,1520667159.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:32:39.673Z,1520667159.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:32:40.081Z,1520667160.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:32:43.223Z,1520667163.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:32:43.415Z,1520667163.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:32:43.793Z,1520667163.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:32:44.185Z,1520667164.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:32:44.573Z,1520667164.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:32:44.973Z,1520667164.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:32:45.385Z,1520667165.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:32:45.784Z,1520667165.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:32:46.186Z,1520667166.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:32:46.587Z,1520667166.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:32:46.977Z,1520667166.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:32:47.405Z,1520667167.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:32:47.793Z,1520667167.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:32:48.176Z,1520667168.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:32:48.584Z,1520667168.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:32:48.993Z,1520667168.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:32:49.383Z,1520667169.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:32:49.776Z,1520667169.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:32:50.184Z,1520667170.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:32:50.589Z,1520667170.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:32:50.982Z,1520667170.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:32:51.380Z,1520667171.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:32:51.783Z,1520667171.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:32:52.183Z,1520667172.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:32:52.585Z,1520667172.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:32:52.979Z,1520667172.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:32:53.377Z,1520667173.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:32:53.780Z,1520667173.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:32:54.161Z,1520667174.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:32:54.584Z,1520667174.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:32:54.986Z,1520667174.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:32:55.387Z,1520667175.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:32:55.761Z,1520667175.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:32:56.165Z,1520667176.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:32:56.565Z,1520667176.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:32:56.969Z,1520667176.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:32:57.369Z,1520667177.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:32:57.795Z,1520667177.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:32:58.194Z,1520667178.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:32:58.595Z,1520667178.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:32:58.961Z,1520667178.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:32:59.365Z,1520667179.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:32:59.773Z,1520667179.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:33:00.195Z,1520667180.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:33:00.599Z,1520667180.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:33:00.999Z,1520667180.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:33:01.371Z,1520667181.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:33:01.769Z,1520667181.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:33:02.171Z,1520667182.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:33:02.577Z,1520667182.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:33:02.975Z,1520667182.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:33:03.409Z,1520667183.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:33:03.770Z,1520667183.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:33:04.174Z,1520667184.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:33:04.571Z,1520667184.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:33:04.969Z,1520667184.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:33:05.375Z,1520667185.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:33:05.782Z,1520667185.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:33:06.174Z,1520667186.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:33:06.573Z,1520667186.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:33:06.977Z,1520667186.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:33:07.370Z,1520667187.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:33:07.775Z,1520667187.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:33:08.182Z,1520667188.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:33:08.575Z,1520667188.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:33:08.969Z,1520667188.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:33:09.371Z,1520667189.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:33:09.777Z,1520667189.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:33:10.172Z,1520667190.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:33:10.576Z,1520667190.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:33:10.999Z,1520667190.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:33:11.381Z,1520667191.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:33:11.770Z,1520667191.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:33:12.177Z,1520667192.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:33:12.604Z,1520667192.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:33:12.971Z,1520667192.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:33:13.371Z,1520667193.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:33:13.775Z,1520667193.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:33:14.178Z,1520667194.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:33:14.577Z,1520667194.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:33:14.970Z,1520667194.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:33:15.377Z,1520667195.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:33:15.807Z,1520667195.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:33:16.172Z,1520667196.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:33:16.578Z,1520667196.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:33:16.978Z,1520667196.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:33:17.377Z,1520667197.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:33:17.771Z,1520667197.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:33:18.177Z,1520667198.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:33:18.569Z,1520667198.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:33:18.972Z,1520667198.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:33:19.377Z,1520667199.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:33:19.779Z,1520667199.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:33:20.179Z,1520667200.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:33:20.577Z,1520667200.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:33:20.971Z,1520667200.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:33:21.370Z,1520667201.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:33:21.775Z,1520667201.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:33:22.177Z,1520667202.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:33:22.579Z,1520667202.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:33:22.979Z,1520667202.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:33:23.378Z,1520667203.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:33:23.773Z,1520667203.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:33:24.177Z,1520667204.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:33:24.580Z,1520667204.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:33:25.012Z,1520667205.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:33:25.377Z,1520667205.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:33:25.784Z,1520667205.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:33:26.184Z,1520667206.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:33:26.589Z,1520667206.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:33:26.980Z,1520667206.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:33:27.368Z,1520667207.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:33:27.773Z,1520667207.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:33:28.171Z,1520667208.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:33:28.584Z,1520667208.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:33:28.978Z,1520667208.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:33:29.382Z,1520667209.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:33:29.768Z,1520667209.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:33:30.177Z,1520667210.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:33:30.570Z,1520667210.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:33:30.971Z,1520667210.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:33:31.370Z,1520667211.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:33:31.782Z,1520667211.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:33:32.178Z,1520667212.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:33:32.582Z,1520667212.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:33:32.971Z,1520667212.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:33:33.374Z,1520667213.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:33:33.781Z,1520667213.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:33:34.181Z,1520667214.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:33:34.583Z,1520667214.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:33:34.986Z,1520667214.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:33:35.389Z,1520667215.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:33:35.772Z,1520667215.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:33:36.174Z,1520667216.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:33:36.570Z,1520667216.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:33:36.970Z,1520667216.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:33:37.377Z,1520667217.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:33:37.819Z,1520667217.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:33:38.184Z,1520667218.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:33:38.582Z,1520667218.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:33:38.971Z,1520667218.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:33:39.372Z,1520667219.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:33:39.374Z,1520667219.374 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-03-10T07:33:39.375Z,1520667219.375 [Default:CheckIn:C.Wait] Stopped
2018-03-10T07:33:39.375Z,1520667219.375 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-03-10T07:33:39.375Z,1520667219.375 [Default:CheckIn:D] Running Loop=1
2018-03-10T07:33:39.773Z,1520667219.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:33:39.781Z,1520667219.781 [Default:CheckIn:D] Stopped
2018-03-10T07:33:39.781Z,1520667219.781 [Default:CheckIn:E] Running Loop=1
2018-03-10T07:33:40.184Z,1520667220.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:33:40.188Z,1520667220.188 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 134.364331 min 
2018-03-10T07:33:40.188Z,1520667220.188 [Default:CheckIn:E] Stopped
2018-03-10T07:33:40.188Z,1520667220.188 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-03-10T07:33:40.188Z,1520667220.188 [Default:CheckIn] Stopped
2018-03-10T07:33:40.188Z,1520667220.188 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-03-10T07:33:40.189Z,1520667220.189 [Default:CheckIn](INFO): Running loop #14
2018-03-10T07:33:40.189Z,1520667220.189 [Default:CheckIn] Running Loop=14
2018-03-10T07:33:40.189Z,1520667220.189 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-03-10T07:33:40.189Z,1520667220.189 [Default:CheckIn:Read_GPS] Running Loop=1
2018-03-10T07:33:43.288Z,1520667223.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:33:43.453Z,1520667223.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:33:43.850Z,1520667223.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:33:44.240Z,1520667224.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:33:44.632Z,1520667224.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:33:45.045Z,1520667225.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:33:45.450Z,1520667225.450 [BPC1](ERROR): Failed to receive battery data
2018-03-10T07:33:45.450Z,1520667225.450 [BPC1] Communications Fault, FailCount= 1
2018-03-10T07:33:45.450Z,1520667225.450 [BPC1](ERROR): Communications Fault
2018-03-10T07:33:45.465Z,1520667225.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:33:45.552Z,1520667225.552 [CBIT](ERROR): Communications Fault in component: BPC1
2018-03-10T07:33:45.877Z,1520667225.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:33:46.265Z,1520667226.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:33:46.654Z,1520667226.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:33:46.743Z,1520667226.743 [CBIT](INFO): Clearing failed state for component BPC1
2018-03-10T07:33:46.743Z,1520667226.743 [BPC1] No Fault, FailCount= 1
2018-03-10T07:33:47.132Z,1520667227.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:33:47.461Z,1520667227.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:33:47.867Z,1520667227.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:33:48.271Z,1520667228.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:33:48.668Z,1520667228.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:33:49.062Z,1520667229.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:33:49.466Z,1520667229.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:33:49.869Z,1520667229.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:33:50.233Z,1520667230.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:33:50.665Z,1520667230.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:33:51.059Z,1520667231.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:33:51.453Z,1520667231.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:33:51.864Z,1520667231.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:33:52.260Z,1520667232.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:33:52.642Z,1520667232.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:33:53.036Z,1520667233.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:33:53.459Z,1520667233.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:33:53.868Z,1520667233.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:33:54.262Z,1520667234.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:33:54.635Z,1520667234.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:33:55.033Z,1520667235.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:33:55.461Z,1520667235.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:33:55.832Z,1520667235.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:33:56.235Z,1520667236.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:33:56.662Z,1520667236.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:33:57.064Z,1520667237.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:33:57.464Z,1520667237.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:33:57.839Z,1520667237.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:33:58.236Z,1520667238.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:33:58.662Z,1520667238.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:33:59.034Z,1520667239.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:33:59.443Z,1520667239.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:33:59.864Z,1520667239.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:34:00.262Z,1520667240.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:34:00.639Z,1520667240.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:34:01.039Z,1520667241.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:34:01.440Z,1520667241.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:34:01.862Z,1520667241.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:34:02.246Z,1520667242.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:34:02.639Z,1520667242.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:34:03.036Z,1520667243.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:34:03.461Z,1520667243.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:34:03.844Z,1520667243.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:34:04.243Z,1520667244.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:34:04.640Z,1520667244.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:34:05.059Z,1520667245.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:34:05.436Z,1520667245.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:34:05.846Z,1520667245.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:34:06.241Z,1520667246.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:34:06.663Z,1520667246.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:34:07.044Z,1520667247.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:34:07.445Z,1520667247.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:34:07.841Z,1520667247.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:34:08.250Z,1520667248.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:34:08.642Z,1520667248.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:34:09.039Z,1520667249.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:34:09.448Z,1520667249.448 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:34:09.449Z,1520667249.449 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 46
2018-03-10T07:34:09.449Z,1520667249.449 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-03-10T07:34:09.450Z,1520667249.450 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:34:09.450Z,1520667249.450 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 46
2018-03-10T07:34:09.450Z,1520667249.450 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-03-10T07:34:09.490Z,1520667249.490 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:34:09.490Z,1520667249.490 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 46
2018-03-10T07:34:09.490Z,1520667249.490 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-10T07:34:09.591Z,1520667249.591 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-03-10T07:34:09.591Z,1520667249.591 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-03-10T07:34:09.591Z,1520667249.591 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-10T07:34:09.943Z,1520667249.943 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-03-10T07:34:09.943Z,1520667249.943 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 46
2018-03-10T07:34:09.944Z,1520667249.944 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-03-10T07:34:09.944Z,1520667249.944 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 46
2018-03-10T07:34:09.944Z,1520667249.944 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-10T07:34:09.944Z,1520667249.944 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 46
2018-03-10T07:34:10.246Z,1520667250.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-03-10T07:34:10.246Z,1520667250.246 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-03-10T07:34:10.247Z,1520667250.247 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-03-10T07:34:10.247Z,1520667250.247 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-03-10T07:34:10.248Z,1520667250.248 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-03-10T07:34:10.248Z,1520667250.248 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-03-10T07:34:10.248Z,1520667250.248 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-10T07:34:10.249Z,1520667250.249 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-10T07:34:10.249Z,1520667250.249 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-10T07:34:10.641Z,1520667250.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-03-10T07:34:10.642Z,1520667250.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:34:11.039Z,1520667251.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-03-10T07:34:11.040Z,1520667251.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:34:11.435Z,1520667251.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-03-10T07:34:11.436Z,1520667251.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:34:11.841Z,1520667251.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-03-10T07:34:11.842Z,1520667251.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:34:12.242Z,1520667252.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-03-10T07:34:12.243Z,1520667252.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:34:12.650Z,1520667252.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-03-10T07:34:12.651Z,1520667252.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:34:13.077Z,1520667253.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-03-10T07:34:13.078Z,1520667253.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:34:13.450Z,1520667253.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-03-10T07:34:13.451Z,1520667253.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:34:13.856Z,1520667253.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-03-10T07:34:13.857Z,1520667253.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:34:14.273Z,1520667254.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-03-10T07:34:14.274Z,1520667254.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:34:14.657Z,1520667254.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-03-10T07:34:14.658Z,1520667254.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:34:15.045Z,1520667255.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-03-10T07:34:15.045Z,1520667255.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:34:15.449Z,1520667255.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-03-10T07:34:15.450Z,1520667255.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:34:15.845Z,1520667255.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-03-10T07:34:15.846Z,1520667255.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:34:16.264Z,1520667256.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-03-10T07:34:16.265Z,1520667256.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:34:16.643Z,1520667256.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-03-10T07:34:16.644Z,1520667256.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:34:17.018Z,1520667257.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-03-10T07:34:17.028Z,1520667257.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:34:17.444Z,1520667257.444 [BPC1](FAULT): Failed to initialize
2018-03-10T07:34:17.444Z,1520667257.444 [BPC1] Communications Fault, FailCount= 2
2018-03-10T07:34:17.444Z,1520667257.444 [BPC1](ERROR): Communications Fault
2018-03-10T07:34:17.451Z,1520667257.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-03-10T07:34:17.452Z,1520667257.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:34:17.531Z,1520667257.531 [CBIT](ERROR): Communications Fault in component: BPC1
2018-03-10T07:34:17.872Z,1520667257.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-03-10T07:34:17.873Z,1520667257.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:34:18.264Z,1520667258.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-03-10T07:34:18.265Z,1520667258.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:34:18.648Z,1520667258.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-03-10T07:34:18.649Z,1520667258.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:34:18.729Z,1520667258.729 [CBIT](INFO): Clearing failed state for component BPC1
2018-03-10T07:34:18.729Z,1520667258.729 [BPC1] No Fault, FailCount= 2
2018-03-10T07:34:19.096Z,1520667259.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-03-10T07:34:19.097Z,1520667259.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:34:19.460Z,1520667259.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-03-10T07:34:19.461Z,1520667259.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:34:19.851Z,1520667259.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-03-10T07:34:19.852Z,1520667259.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:34:20.254Z,1520667260.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-03-10T07:34:20.255Z,1520667260.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:34:20.642Z,1520667260.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-03-10T07:34:20.643Z,1520667260.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:34:21.048Z,1520667261.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-03-10T07:34:21.049Z,1520667261.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:34:21.454Z,1520667261.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-03-10T07:34:21.455Z,1520667261.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:34:21.854Z,1520667261.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-03-10T07:34:21.855Z,1520667261.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:34:22.250Z,1520667262.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-03-10T07:34:22.250Z,1520667262.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:34:22.640Z,1520667262.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-03-10T07:34:22.642Z,1520667262.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:34:23.048Z,1520667263.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-03-10T07:34:23.049Z,1520667263.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:34:23.453Z,1520667263.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-03-10T07:34:23.454Z,1520667263.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:34:23.852Z,1520667263.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-03-10T07:34:23.853Z,1520667263.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:34:24.254Z,1520667264.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-03-10T07:34:24.256Z,1520667264.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:34:24.651Z,1520667264.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-03-10T07:34:24.652Z,1520667264.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:34:25.044Z,1520667265.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-03-10T07:34:25.045Z,1520667265.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:34:25.456Z,1520667265.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-03-10T07:34:25.457Z,1520667265.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:34:25.909Z,1520667265.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.5 s old, using for 20.0 s.
2018-03-10T07:34:25.910Z,1520667265.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:34:26.260Z,1520667266.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-03-10T07:34:26.261Z,1520667266.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:34:26.648Z,1520667266.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-03-10T07:34:26.649Z,1520667266.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:34:27.028Z,1520667267.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-03-10T07:34:27.029Z,1520667267.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:34:27.438Z,1520667267.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-03-10T07:34:27.439Z,1520667267.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:34:27.838Z,1520667267.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2018-03-10T07:34:27.842Z,1520667267.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:34:28.242Z,1520667268.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2018-03-10T07:34:28.243Z,1520667268.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:34:28.682Z,1520667268.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2018-03-10T07:34:28.697Z,1520667268.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:34:29.040Z,1520667269.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2018-03-10T07:34:29.041Z,1520667269.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:34:29.443Z,1520667269.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 20.0 s old, using for 20.0 s.
2018-03-10T07:34:29.444Z,1520667269.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:34:29.847Z,1520667269.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:34:30.250Z,1520667270.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:34:30.657Z,1520667270.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:34:31.045Z,1520667271.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:34:31.449Z,1520667271.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:34:31.851Z,1520667271.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:34:32.265Z,1520667272.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:34:32.645Z,1520667272.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:34:33.042Z,1520667273.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:34:33.457Z,1520667273.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:34:33.876Z,1520667273.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:34:34.279Z,1520667274.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:34:34.644Z,1520667274.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:34:35.041Z,1520667275.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:34:35.479Z,1520667275.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:34:35.853Z,1520667275.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:34:36.250Z,1520667276.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:34:36.641Z,1520667276.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:34:37.049Z,1520667277.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:34:37.458Z,1520667277.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:34:37.851Z,1520667277.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:34:38.250Z,1520667278.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:34:38.660Z,1520667278.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:34:39.044Z,1520667279.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:34:39.453Z,1520667279.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:34:39.847Z,1520667279.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:34:40.265Z,1520667280.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:34:43.348Z,1520667283.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:34:43.505Z,1520667283.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:34:43.906Z,1520667283.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:34:44.306Z,1520667284.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:34:44.705Z,1520667284.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:34:45.094Z,1520667285.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:34:45.497Z,1520667285.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:34:45.897Z,1520667285.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:34:46.296Z,1520667286.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:34:46.707Z,1520667286.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:34:47.109Z,1520667287.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:34:47.505Z,1520667287.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:34:47.895Z,1520667287.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:34:48.302Z,1520667288.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:34:48.701Z,1520667288.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:34:49.092Z,1520667289.092 [BPC1](FAULT): Failed to initialize
2018-03-10T07:34:49.092Z,1520667289.092 [BPC1] Communications Fault, FailCount= 3
2018-03-10T07:34:49.092Z,1520667289.092 [BPC1](ERROR): Communications Fault
2018-03-10T07:34:49.099Z,1520667289.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:34:49.179Z,1520667289.179 [CBIT](ERROR): Communications Fault in component: BPC1
2018-03-10T07:34:49.507Z,1520667289.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:34:49.913Z,1520667289.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:34:50.308Z,1520667290.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:34:50.388Z,1520667290.388 [CBIT](INFO): Clearing failed state for component BPC1
2018-03-10T07:34:50.388Z,1520667290.388 [BPC1] No Fault, FailCount= 3
2018-03-10T07:34:50.753Z,1520667290.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:34:51.095Z,1520667291.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:34:51.501Z,1520667291.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:34:51.898Z,1520667291.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:34:52.293Z,1520667292.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:34:52.706Z,1520667292.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:34:53.106Z,1520667293.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:34:53.505Z,1520667293.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:34:53.897Z,1520667293.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:34:54.296Z,1520667294.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:34:54.694Z,1520667294.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:34:55.094Z,1520667295.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:34:55.505Z,1520667295.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:34:55.905Z,1520667295.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:34:56.306Z,1520667296.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:34:56.699Z,1520667296.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:34:57.093Z,1520667297.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:34:57.497Z,1520667297.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:34:57.895Z,1520667297.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:34:58.293Z,1520667298.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:34:58.713Z,1520667298.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:34:59.102Z,1520667299.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:34:59.505Z,1520667299.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:34:59.893Z,1520667299.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:35:00.301Z,1520667300.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:35:00.694Z,1520667300.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:35:01.101Z,1520667301.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:35:01.502Z,1520667301.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:35:01.910Z,1520667301.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:35:02.307Z,1520667302.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:35:02.697Z,1520667302.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:35:03.093Z,1520667303.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:35:03.497Z,1520667303.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:35:03.897Z,1520667303.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:35:04.294Z,1520667304.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:35:04.713Z,1520667304.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:35:05.105Z,1520667305.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:35:05.506Z,1520667305.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:35:05.897Z,1520667305.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:35:06.301Z,1520667306.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:35:06.695Z,1520667306.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:35:07.094Z,1520667307.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:35:07.513Z,1520667307.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:35:07.913Z,1520667307.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:35:08.306Z,1520667308.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:35:08.699Z,1520667308.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:35:09.094Z,1520667309.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:35:09.500Z,1520667309.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:35:09.897Z,1520667309.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:35:10.294Z,1520667310.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:35:10.706Z,1520667310.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:35:11.102Z,1520667311.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:35:11.513Z,1520667311.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:35:11.894Z,1520667311.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:35:12.293Z,1520667312.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:35:12.695Z,1520667312.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:35:13.094Z,1520667313.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:35:13.505Z,1520667313.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:35:13.909Z,1520667313.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:35:14.307Z,1520667314.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:35:14.699Z,1520667314.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:35:15.093Z,1520667315.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:35:15.497Z,1520667315.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:35:15.897Z,1520667315.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:35:16.294Z,1520667316.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:35:16.713Z,1520667316.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:35:17.106Z,1520667317.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:35:17.513Z,1520667317.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:35:17.894Z,1520667317.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:35:18.293Z,1520667318.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:35:18.696Z,1520667318.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:35:19.101Z,1520667319.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:35:19.503Z,1520667319.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:35:19.905Z,1520667319.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:35:20.306Z,1520667320.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:35:20.697Z,1520667320.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:35:21.088Z,1520667321.088 [BPC1](FAULT): Failed to initialize
2018-03-10T07:35:21.088Z,1520667321.088 [BPC1] Communications Fault, FailCount= 4
2018-03-10T07:35:21.088Z,1520667321.088 [BPC1](ERROR): Communications Fault
2018-03-10T07:35:21.101Z,1520667321.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:35:21.175Z,1520667321.175 [CBIT](ERROR): Communications Fault in component: BPC1
2018-03-10T07:35:21.505Z,1520667321.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:35:21.897Z,1520667321.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:35:22.295Z,1520667322.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:35:22.367Z,1520667322.367 [CBIT](INFO): Clearing failed state for component BPC1
2018-03-10T07:35:22.367Z,1520667322.367 [BPC1] No Fault, FailCount= 4
2018-03-10T07:35:22.768Z,1520667322.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:35:23.110Z,1520667323.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:35:23.506Z,1520667323.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:35:23.896Z,1520667323.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:35:24.301Z,1520667324.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:35:24.698Z,1520667324.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:35:25.096Z,1520667325.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:35:25.507Z,1520667325.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:35:25.908Z,1520667325.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:35:26.308Z,1520667326.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:35:26.701Z,1520667326.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:35:26.785Z,1520667326.785 [CBIT](DEBUG): EFC running - data check-sum false
2018-03-10T07:35:27.098Z,1520667327.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:35:27.500Z,1520667327.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:35:27.900Z,1520667327.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:35:28.297Z,1520667328.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:35:28.709Z,1520667328.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:35:29.117Z,1520667329.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:35:29.510Z,1520667329.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:35:29.901Z,1520667329.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:35:30.305Z,1520667330.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:35:30.701Z,1520667330.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:35:31.100Z,1520667331.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:35:31.507Z,1520667331.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:35:31.905Z,1520667331.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:35:32.303Z,1520667332.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:35:32.697Z,1520667332.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:35:33.101Z,1520667333.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:35:33.499Z,1520667333.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:35:33.898Z,1520667333.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:35:34.299Z,1520667334.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:35:34.707Z,1520667334.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:35:35.110Z,1520667335.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:35:35.508Z,1520667335.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:35:35.904Z,1520667335.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:35:36.297Z,1520667336.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:35:36.697Z,1520667336.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:35:37.101Z,1520667337.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:35:37.504Z,1520667337.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:35:37.906Z,1520667337.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:35:38.307Z,1520667338.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:35:38.697Z,1520667338.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:35:39.101Z,1520667339.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:35:39.486Z,1520667339.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:35:39.883Z,1520667339.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:35:40.304Z,1520667340.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:35:43.417Z,1520667343.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:35:43.566Z,1520667343.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:35:43.974Z,1520667343.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:35:44.362Z,1520667344.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:35:44.760Z,1520667344.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:35:45.157Z,1520667345.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:35:45.585Z,1520667345.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:35:45.971Z,1520667345.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:35:46.373Z,1520667346.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:35:46.809Z,1520667346.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:35:47.168Z,1520667347.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:35:47.577Z,1520667347.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:35:47.989Z,1520667347.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:35:48.368Z,1520667348.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:35:48.784Z,1520667348.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:35:49.184Z,1520667349.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:35:49.571Z,1520667349.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:35:49.950Z,1520667349.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:35:50.349Z,1520667350.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:35:50.750Z,1520667350.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:35:51.150Z,1520667351.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:35:51.580Z,1520667351.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:35:51.975Z,1520667351.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:35:52.378Z,1520667352.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:35:52.750Z,1520667352.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:35:53.156Z,1520667353.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:35:53.589Z,1520667353.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:35:53.950Z,1520667353.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:35:54.357Z,1520667354.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:35:54.781Z,1520667354.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:35:55.185Z,1520667355.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:35:55.582Z,1520667355.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:35:55.954Z,1520667355.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:35:56.356Z,1520667356.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:35:56.754Z,1520667356.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:35:57.157Z,1520667357.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:35:57.584Z,1520667357.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:35:57.979Z,1520667357.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:35:58.382Z,1520667358.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:35:58.749Z,1520667358.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:35:59.154Z,1520667359.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:35:59.554Z,1520667359.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:35:59.986Z,1520667359.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:36:00.385Z,1520667360.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:36:00.787Z,1520667360.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:36:01.166Z,1520667361.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:36:01.566Z,1520667361.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:36:01.957Z,1520667361.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:36:02.357Z,1520667362.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:36:02.759Z,1520667362.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:36:03.157Z,1520667363.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:36:03.563Z,1520667363.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:36:03.963Z,1520667363.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:36:04.363Z,1520667364.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:36:04.792Z,1520667364.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:36:05.192Z,1520667365.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:36:05.559Z,1520667365.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:36:05.961Z,1520667365.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:36:06.358Z,1520667366.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:36:06.769Z,1520667366.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:36:07.169Z,1520667367.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:36:07.563Z,1520667367.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:36:07.958Z,1520667367.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:36:08.360Z,1520667368.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:36:08.760Z,1520667368.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:36:09.159Z,1520667369.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:36:09.565Z,1520667369.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:36:09.962Z,1520667369.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:36:10.369Z,1520667370.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:36:10.765Z,1520667370.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:36:11.169Z,1520667371.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:36:11.558Z,1520667371.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:36:11.973Z,1520667371.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:36:12.377Z,1520667372.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:36:12.770Z,1520667372.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:36:13.176Z,1520667373.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:36:13.570Z,1520667373.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:36:13.957Z,1520667373.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:36:14.364Z,1520667374.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:36:14.762Z,1520667374.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:36:15.156Z,1520667375.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:36:15.569Z,1520667375.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:36:15.998Z,1520667375.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:36:16.381Z,1520667376.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:36:16.750Z,1520667376.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:36:17.153Z,1520667377.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:36:17.557Z,1520667377.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:36:17.953Z,1520667377.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:36:18.357Z,1520667378.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:36:18.849Z,1520667378.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:36:19.173Z,1520667379.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:36:19.573Z,1520667379.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:36:19.958Z,1520667379.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:36:20.369Z,1520667380.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:36:20.761Z,1520667380.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:36:21.158Z,1520667381.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:36:21.576Z,1520667381.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:36:21.977Z,1520667381.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:36:22.370Z,1520667382.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:36:22.761Z,1520667382.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:36:23.165Z,1520667383.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:36:23.559Z,1520667383.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:36:23.961Z,1520667383.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:36:24.365Z,1520667384.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:36:24.845Z,1520667384.845 [BPC1](ERROR): Bank B: No match for stick 5 serial number:1717 in the onboard configuration file.
2018-03-10T07:36:24.845Z,1520667384.845 [BPC1](ERROR): Failed to parse Bank B battery data
2018-03-10T07:36:24.845Z,1520667384.845 [BPC1] Data Fault, FailCount= 1
2018-03-10T07:36:24.846Z,1520667384.846 [BPC1](ERROR): Data Fault
2018-03-10T07:36:24.853Z,1520667384.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:36:24.932Z,1520667384.932 [CBIT](ERROR): Data Fault in component: BPC1
2018-03-10T07:36:25.176Z,1520667385.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:36:25.573Z,1520667385.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:36:25.961Z,1520667385.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:36:26.040Z,1520667386.040 [CBIT](INFO): Clearing failed state for component BPC1
2018-03-10T07:36:26.040Z,1520667386.040 [BPC1] No Fault, FailCount= 1
2018-03-10T07:36:26.401Z,1520667386.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:36:26.759Z,1520667386.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:36:27.159Z,1520667387.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:36:27.570Z,1520667387.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:36:27.974Z,1520667387.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:36:28.369Z,1520667388.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:36:28.761Z,1520667388.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:36:29.161Z,1520667389.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:36:29.559Z,1520667389.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:36:29.956Z,1520667389.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:36:30.361Z,1520667390.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:36:30.777Z,1520667390.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:36:31.170Z,1520667391.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:36:31.567Z,1520667391.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:36:32.004Z,1520667392.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:36:32.360Z,1520667392.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:36:32.764Z,1520667392.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:36:33.159Z,1520667393.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:36:33.570Z,1520667393.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:36:33.973Z,1520667393.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:36:34.369Z,1520667394.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:36:34.756Z,1520667394.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:36:35.165Z,1520667395.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:36:35.561Z,1520667395.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:36:35.959Z,1520667395.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:36:36.358Z,1520667396.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:36:36.770Z,1520667396.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:36:37.167Z,1520667397.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:36:37.573Z,1520667397.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:36:37.964Z,1520667397.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:36:38.361Z,1520667398.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:36:38.761Z,1520667398.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:36:39.171Z,1520667399.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:36:39.572Z,1520667399.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:36:39.981Z,1520667399.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:36:40.370Z,1520667400.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:36:40.762Z,1520667400.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:36:41.159Z,1520667401.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:36:44.318Z,1520667404.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:36:44.497Z,1520667404.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:36:44.866Z,1520667404.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:36:45.269Z,1520667405.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:36:45.666Z,1520667405.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:36:46.049Z,1520667406.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:36:46.469Z,1520667406.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:36:46.846Z,1520667406.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:36:47.268Z,1520667407.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:36:47.669Z,1520667407.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:36:48.066Z,1520667408.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:36:48.470Z,1520667408.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:36:48.850Z,1520667408.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:36:49.252Z,1520667409.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:36:49.654Z,1520667409.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:36:50.049Z,1520667410.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:36:50.455Z,1520667410.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:36:50.892Z,1520667410.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:36:51.279Z,1520667411.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:36:51.665Z,1520667411.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:36:52.060Z,1520667412.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:36:52.458Z,1520667412.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:36:52.859Z,1520667412.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:36:53.260Z,1520667413.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:36:53.668Z,1520667413.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:36:54.070Z,1520667414.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:36:54.470Z,1520667414.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:36:54.862Z,1520667414.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:36:55.264Z,1520667415.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:36:55.681Z,1520667415.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:36:56.061Z,1520667416.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:36:56.475Z,1520667416.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:36:56.903Z,1520667416.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:36:57.268Z,1520667417.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:36:57.658Z,1520667417.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:36:58.069Z,1520667418.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:36:58.460Z,1520667418.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:36:58.859Z,1520667418.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:36:59.266Z,1520667419.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:36:59.668Z,1520667419.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:37:00.069Z,1520667420.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:37:00.468Z,1520667420.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:37:00.872Z,1520667420.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:37:01.256Z,1520667421.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:37:01.661Z,1520667421.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:37:02.059Z,1520667422.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:37:02.467Z,1520667422.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:37:02.866Z,1520667422.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:37:03.271Z,1520667423.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:37:03.665Z,1520667423.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:37:04.061Z,1520667424.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:37:04.465Z,1520667424.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:37:04.861Z,1520667424.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:37:05.255Z,1520667425.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:37:05.670Z,1520667425.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:37:06.071Z,1520667426.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:37:06.467Z,1520667426.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:37:06.865Z,1520667426.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:37:07.277Z,1520667427.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:37:07.657Z,1520667427.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:37:08.060Z,1520667428.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:37:08.467Z,1520667428.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:37:08.867Z,1520667428.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:37:09.284Z,1520667429.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:37:09.669Z,1520667429.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:37:10.063Z,1520667430.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:37:10.441Z,1520667430.441 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:37:10.441Z,1520667430.441 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 47
2018-03-10T07:37:10.441Z,1520667430.441 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-03-10T07:37:10.469Z,1520667430.469 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:37:10.469Z,1520667430.469 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 47
2018-03-10T07:37:10.469Z,1520667430.469 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-03-10T07:37:10.471Z,1520667430.471 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:37:10.471Z,1520667430.471 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 47
2018-03-10T07:37:10.471Z,1520667430.471 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-10T07:37:10.563Z,1520667430.563 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-03-10T07:37:10.563Z,1520667430.563 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-03-10T07:37:10.563Z,1520667430.563 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-10T07:37:10.951Z,1520667430.951 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-03-10T07:37:10.951Z,1520667430.951 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 47
2018-03-10T07:37:10.952Z,1520667430.952 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-03-10T07:37:10.952Z,1520667430.952 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 47
2018-03-10T07:37:10.952Z,1520667430.952 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-10T07:37:10.952Z,1520667430.952 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 47
2018-03-10T07:37:11.272Z,1520667431.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-03-10T07:37:11.272Z,1520667431.272 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-03-10T07:37:11.272Z,1520667431.272 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-03-10T07:37:11.273Z,1520667431.273 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-03-10T07:37:11.273Z,1520667431.273 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-03-10T07:37:11.273Z,1520667431.273 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-03-10T07:37:11.274Z,1520667431.274 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-10T07:37:11.274Z,1520667431.274 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-10T07:37:11.279Z,1520667431.279 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-10T07:37:11.679Z,1520667431.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-03-10T07:37:11.680Z,1520667431.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:37:12.058Z,1520667432.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-03-10T07:37:12.075Z,1520667432.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:37:12.462Z,1520667432.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-03-10T07:37:12.479Z,1520667432.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:37:12.853Z,1520667432.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-03-10T07:37:12.854Z,1520667432.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:37:13.260Z,1520667433.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-03-10T07:37:13.261Z,1520667433.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:37:13.650Z,1520667433.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-03-10T07:37:13.652Z,1520667433.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:37:14.053Z,1520667434.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-03-10T07:37:14.054Z,1520667434.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:37:14.480Z,1520667434.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-03-10T07:37:14.481Z,1520667434.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:37:14.858Z,1520667434.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-03-10T07:37:14.859Z,1520667434.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:37:15.280Z,1520667435.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-03-10T07:37:15.281Z,1520667435.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:37:15.653Z,1520667435.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-03-10T07:37:15.654Z,1520667435.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:37:16.053Z,1520667436.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-03-10T07:37:16.054Z,1520667436.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:37:16.454Z,1520667436.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-03-10T07:37:16.455Z,1520667436.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:37:16.854Z,1520667436.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-03-10T07:37:16.854Z,1520667436.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:37:17.252Z,1520667437.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-03-10T07:37:17.253Z,1520667437.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:37:17.681Z,1520667437.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-03-10T07:37:17.681Z,1520667437.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:37:18.058Z,1520667438.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-03-10T07:37:18.060Z,1520667438.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:37:18.472Z,1520667438.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-03-10T07:37:18.473Z,1520667438.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:37:18.881Z,1520667438.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-03-10T07:37:18.882Z,1520667438.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:37:19.253Z,1520667439.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-03-10T07:37:19.254Z,1520667439.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:37:19.653Z,1520667439.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-03-10T07:37:19.654Z,1520667439.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:37:20.052Z,1520667440.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-03-10T07:37:20.053Z,1520667440.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:37:20.466Z,1520667440.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-03-10T07:37:20.484Z,1520667440.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:37:20.858Z,1520667440.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-03-10T07:37:20.859Z,1520667440.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:37:21.264Z,1520667441.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-03-10T07:37:21.265Z,1520667441.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:37:21.659Z,1520667441.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-03-10T07:37:21.660Z,1520667441.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:37:22.086Z,1520667442.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-03-10T07:37:22.087Z,1520667442.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:37:22.456Z,1520667442.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-03-10T07:37:22.457Z,1520667442.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:37:22.854Z,1520667442.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-03-10T07:37:22.855Z,1520667442.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:37:23.254Z,1520667443.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-03-10T07:37:23.255Z,1520667443.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:37:23.658Z,1520667443.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-03-10T07:37:23.659Z,1520667443.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:37:24.058Z,1520667444.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-03-10T07:37:24.059Z,1520667444.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:37:24.459Z,1520667444.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-03-10T07:37:24.460Z,1520667444.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:37:24.863Z,1520667444.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-03-10T07:37:24.864Z,1520667444.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:37:25.254Z,1520667445.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-03-10T07:37:25.255Z,1520667445.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:37:25.654Z,1520667445.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-03-10T07:37:25.655Z,1520667445.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:37:26.056Z,1520667446.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-03-10T07:37:26.057Z,1520667446.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:37:26.465Z,1520667446.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-03-10T07:37:26.466Z,1520667446.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:37:26.858Z,1520667446.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-03-10T07:37:26.859Z,1520667446.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:37:27.259Z,1520667447.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-03-10T07:37:27.260Z,1520667447.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:37:27.654Z,1520667447.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-03-10T07:37:27.655Z,1520667447.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:37:28.051Z,1520667448.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-03-10T07:37:28.052Z,1520667448.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:37:28.455Z,1520667448.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-03-10T07:37:28.456Z,1520667448.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:37:28.855Z,1520667448.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2018-03-10T07:37:28.856Z,1520667448.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:37:29.257Z,1520667449.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2018-03-10T07:37:29.258Z,1520667449.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:37:29.664Z,1520667449.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2018-03-10T07:37:29.665Z,1520667449.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:37:30.068Z,1520667450.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2018-03-10T07:37:30.069Z,1520667450.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:37:30.489Z,1520667450.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:37:30.861Z,1520667450.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:37:31.256Z,1520667451.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:37:31.654Z,1520667451.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:37:32.057Z,1520667452.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:37:32.469Z,1520667452.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:37:32.862Z,1520667452.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:37:33.263Z,1520667453.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:37:33.654Z,1520667453.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:37:34.065Z,1520667454.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:37:34.477Z,1520667454.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:37:34.847Z,1520667454.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:37:35.264Z,1520667455.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:37:35.676Z,1520667455.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:37:36.070Z,1520667456.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:37:36.469Z,1520667456.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:37:36.864Z,1520667456.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:37:37.265Z,1520667457.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:37:37.663Z,1520667457.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:37:38.063Z,1520667458.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:37:38.467Z,1520667458.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:37:38.867Z,1520667458.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:37:39.276Z,1520667459.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:37:39.666Z,1520667459.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:37:40.066Z,1520667460.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:37:40.455Z,1520667460.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:37:43.623Z,1520667463.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:37:43.781Z,1520667463.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:37:44.185Z,1520667464.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:37:44.574Z,1520667464.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:37:44.978Z,1520667464.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:37:45.373Z,1520667465.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:37:45.784Z,1520667465.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:37:46.180Z,1520667466.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:37:46.578Z,1520667466.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:37:46.977Z,1520667466.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:37:47.377Z,1520667467.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:37:47.781Z,1520667467.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:37:48.154Z,1520667468.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:37:48.561Z,1520667468.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:37:48.955Z,1520667468.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:37:49.354Z,1520667469.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:37:49.781Z,1520667469.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:37:50.184Z,1520667470.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:37:50.585Z,1520667470.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:37:50.954Z,1520667470.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:37:51.391Z,1520667471.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:37:51.792Z,1520667471.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:37:52.161Z,1520667472.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:37:52.586Z,1520667472.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:37:52.986Z,1520667472.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:37:53.386Z,1520667473.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:37:53.758Z,1520667473.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:37:54.158Z,1520667474.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:37:54.565Z,1520667474.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:37:54.964Z,1520667474.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:37:55.387Z,1520667475.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:37:55.787Z,1520667475.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:37:56.170Z,1520667476.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:37:56.574Z,1520667476.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:37:56.961Z,1520667476.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:37:57.365Z,1520667477.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:37:57.765Z,1520667477.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:37:58.169Z,1520667478.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:37:58.567Z,1520667478.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:37:58.970Z,1520667478.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:37:59.366Z,1520667479.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:37:59.770Z,1520667479.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:38:00.163Z,1520667480.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:38:00.564Z,1520667480.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:38:00.963Z,1520667480.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:38:01.364Z,1520667481.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:38:01.767Z,1520667481.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:38:02.173Z,1520667482.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:38:02.596Z,1520667482.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:38:02.969Z,1520667482.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:38:03.364Z,1520667483.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:38:03.764Z,1520667483.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:38:04.162Z,1520667484.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:38:04.573Z,1520667484.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:38:04.970Z,1520667484.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:38:05.373Z,1520667485.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:38:05.762Z,1520667485.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:38:06.163Z,1520667486.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:38:06.568Z,1520667486.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:38:06.999Z,1520667486.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:38:07.369Z,1520667487.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:38:07.769Z,1520667487.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:38:08.177Z,1520667488.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:38:08.569Z,1520667488.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:38:08.969Z,1520667488.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:38:09.366Z,1520667489.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:38:09.765Z,1520667489.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:38:10.162Z,1520667490.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:38:10.570Z,1520667490.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:38:10.970Z,1520667490.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:38:11.370Z,1520667491.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:38:11.766Z,1520667491.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:38:12.169Z,1520667492.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:38:12.569Z,1520667492.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:38:12.964Z,1520667492.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:38:13.370Z,1520667493.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:38:13.777Z,1520667493.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:38:14.175Z,1520667494.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:38:14.573Z,1520667494.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:38:14.972Z,1520667494.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:38:15.373Z,1520667495.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:38:15.765Z,1520667495.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:38:16.165Z,1520667496.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:38:16.579Z,1520667496.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:38:16.974Z,1520667496.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:38:17.374Z,1520667497.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:38:17.765Z,1520667497.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:38:18.173Z,1520667498.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:38:18.572Z,1520667498.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:38:18.989Z,1520667498.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:38:19.364Z,1520667499.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:38:19.781Z,1520667499.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:38:20.178Z,1520667500.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:38:20.575Z,1520667500.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:38:20.963Z,1520667500.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:38:21.365Z,1520667501.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:38:21.765Z,1520667501.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:38:22.169Z,1520667502.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:38:22.575Z,1520667502.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:38:22.979Z,1520667502.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:38:23.374Z,1520667503.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:38:23.765Z,1520667503.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:38:24.166Z,1520667504.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:38:24.573Z,1520667504.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:38:24.989Z,1520667504.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:38:25.362Z,1520667505.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:38:25.774Z,1520667505.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:38:26.176Z,1520667506.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:38:26.576Z,1520667506.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:38:26.962Z,1520667506.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:38:27.367Z,1520667507.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:38:27.770Z,1520667507.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:38:28.168Z,1520667508.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:38:28.577Z,1520667508.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:38:28.977Z,1520667508.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:38:29.375Z,1520667509.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:38:29.769Z,1520667509.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:38:30.170Z,1520667510.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:38:30.566Z,1520667510.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:38:30.966Z,1520667510.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:38:31.372Z,1520667511.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:38:31.793Z,1520667511.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:38:32.176Z,1520667512.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:38:32.576Z,1520667512.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:38:32.970Z,1520667512.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:38:33.354Z,1520667513.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:38:33.754Z,1520667513.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:38:34.177Z,1520667514.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:38:34.585Z,1520667514.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:38:34.978Z,1520667514.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:38:35.376Z,1520667515.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:38:35.754Z,1520667515.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:38:36.175Z,1520667516.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:38:36.589Z,1520667516.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:38:36.954Z,1520667516.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:38:37.354Z,1520667517.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:38:37.782Z,1520667517.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:38:38.182Z,1520667518.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:38:38.582Z,1520667518.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:38:38.957Z,1520667518.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:38:39.353Z,1520667519.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:38:39.754Z,1520667519.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:38:40.157Z,1520667520.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:38:40.589Z,1520667520.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:38:40.592Z,1520667520.592 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-03-10T07:33:40.2Z
2018-03-10T07:38:40.592Z,1520667520.592 [Default:CheckIn:Read_GPS] Stopped
2018-03-10T07:38:40.592Z,1520667520.592 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-03-10T07:38:43.693Z,1520667523.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:38:44.107Z,1520667524.107 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20180310T051512/Courier0056.lzma
2018-03-10T07:38:44.162Z,1520667524.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:38:44.444Z,1520667524.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:38:44.773Z,1520667524.773 [DataOverHttps](INFO): Moved sent file to Logs/20180310T051512/Courier0056.lzma.bak
2018-03-10T07:38:44.773Z,1520667524.773 [DataOverHttps](INFO): SBD MOMSN=8002787
2018-03-10T07:38:44.832Z,1520667524.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:38:45.489Z,1520667525.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:38:45.587Z,1520667525.587 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-03-10T07:38:45.587Z,1520667525.587 [NAL9602] Data Fault, FailCount= 4
2018-03-10T07:38:45.587Z,1520667525.587 [NAL9602](ERROR): Data Fault
2018-03-10T07:38:45.642Z,1520667525.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:38:45.731Z,1520667525.731 [CBIT](ERROR): Data Fault in component: NAL9602
2018-03-10T07:38:45.992Z,1520667525.992 [NAL9602](INFO): Powering down
2018-03-10T07:38:46.050Z,1520667526.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:38:49.151Z,1520667529.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:38:49.297Z,1520667529.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:38:49.371Z,1520667529.371 [CBIT](INFO): Clearing failed state for component NAL9602
2018-03-10T07:38:49.371Z,1520667529.371 [NAL9602] No Fault, FailCount= 4
2018-03-10T07:38:49.694Z,1520667529.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:38:50.097Z,1520667530.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:38:50.491Z,1520667530.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:38:50.895Z,1520667530.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:38:51.289Z,1520667531.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:38:54.396Z,1520667534.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:38:54.570Z,1520667534.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:38:54.891Z,1520667534.891 [DataOverHttps](INFO): Sending 134 bytes from file Logs/20180310T051512/Express0057.lzma
2018-03-10T07:38:54.945Z,1520667534.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:38:55.336Z,1520667535.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:38:55.693Z,1520667535.693 [DataOverHttps](INFO): Moved sent file to Logs/20180310T051512/Express0057.lzma.bak
2018-03-10T07:38:55.693Z,1520667535.693 [DataOverHttps](INFO): SBD MOMSN=8002789
2018-03-10T07:38:55.750Z,1520667535.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:38:56.397Z,1520667536.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:38:56.400Z,1520667536.400 [Default:CheckIn:Read_Iridium] Stopped
2018-03-10T07:38:56.400Z,1520667536.400 [Default:CheckIn:C.Wait] Running Loop=1
2018-03-10T07:38:56.400Z,1520667536.400 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-03-10T07:38:56.534Z,1520667536.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:38:56.945Z,1520667536.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:38:57.353Z,1520667537.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:38:57.738Z,1520667537.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:38:58.136Z,1520667538.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:38:58.538Z,1520667538.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:38:58.937Z,1520667538.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:39:02.042Z,1520667542.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:39:02.237Z,1520667542.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:39:02.595Z,1520667542.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:39:02.994Z,1520667542.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:39:03.396Z,1520667543.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:39:03.798Z,1520667543.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:39:04.195Z,1520667544.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:39:04.596Z,1520667544.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:39:04.995Z,1520667544.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:39:05.397Z,1520667545.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:39:05.795Z,1520667545.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:39:06.195Z,1520667546.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:39:06.600Z,1520667546.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:39:07.001Z,1520667547.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:39:07.405Z,1520667547.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:39:07.797Z,1520667547.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:39:08.195Z,1520667548.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:39:08.596Z,1520667548.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:39:08.996Z,1520667548.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:39:09.398Z,1520667549.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:39:09.802Z,1520667549.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:39:10.221Z,1520667550.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:39:10.588Z,1520667550.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:39:10.993Z,1520667550.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:39:11.384Z,1520667551.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:39:11.817Z,1520667551.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:39:12.186Z,1520667552.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:39:12.590Z,1520667552.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:39:12.997Z,1520667552.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:39:13.385Z,1520667553.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:39:13.792Z,1520667553.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:39:14.182Z,1520667554.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:39:14.604Z,1520667554.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:39:15.000Z,1520667555.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:39:15.389Z,1520667555.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:39:15.809Z,1520667555.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:39:16.156Z,1520667556.156 [NAL9602](INFO): Powering up NAL9602
2018-03-10T07:39:16.193Z,1520667556.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:39:16.580Z,1520667556.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:39:16.986Z,1520667556.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:39:17.383Z,1520667557.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:39:17.793Z,1520667557.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:39:18.193Z,1520667558.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:39:18.588Z,1520667558.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:39:18.985Z,1520667558.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:39:19.388Z,1520667559.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:39:19.788Z,1520667559.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:39:20.189Z,1520667560.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:39:20.588Z,1520667560.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:39:20.989Z,1520667560.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:39:21.393Z,1520667561.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:39:21.793Z,1520667561.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:39:22.192Z,1520667562.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:39:22.599Z,1520667562.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:39:23.026Z,1520667563.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:39:23.395Z,1520667563.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:39:23.796Z,1520667563.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:39:24.230Z,1520667564.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:39:24.593Z,1520667564.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:39:24.995Z,1520667564.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:39:25.393Z,1520667565.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:39:25.794Z,1520667565.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:39:26.185Z,1520667566.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:39:26.594Z,1520667566.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:39:27.000Z,1520667567.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:39:27.350Z,1520667567.350 [NAL9602](INFO): NAL9602 initialized
2018-03-10T07:39:27.394Z,1520667567.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:39:27.793Z,1520667567.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:39:28.199Z,1520667568.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:39:28.595Z,1520667568.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:39:28.994Z,1520667568.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:39:29.394Z,1520667569.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:39:29.793Z,1520667569.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:39:30.194Z,1520667570.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:39:30.604Z,1520667570.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:39:30.999Z,1520667570.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:39:31.398Z,1520667571.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:39:31.799Z,1520667571.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:39:32.193Z,1520667572.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:39:32.601Z,1520667572.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:39:32.996Z,1520667572.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:39:33.398Z,1520667573.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:39:33.805Z,1520667573.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:39:34.207Z,1520667574.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:39:34.613Z,1520667574.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:39:35.017Z,1520667575.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:39:35.421Z,1520667575.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:39:35.813Z,1520667575.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:39:36.207Z,1520667576.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:39:36.610Z,1520667576.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:39:36.995Z,1520667576.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:39:37.396Z,1520667577.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:39:37.808Z,1520667577.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:39:38.204Z,1520667578.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:39:38.606Z,1520667578.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:39:38.997Z,1520667578.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:39:39.401Z,1520667579.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:39:39.807Z,1520667579.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:39:40.209Z,1520667580.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:39:40.609Z,1520667580.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:39:40.996Z,1520667580.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:39:41.401Z,1520667581.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:39:41.809Z,1520667581.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:39:42.214Z,1520667582.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:39:42.611Z,1520667582.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:39:42.997Z,1520667582.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:39:43.395Z,1520667583.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:39:43.813Z,1520667583.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:39:44.206Z,1520667584.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:39:44.606Z,1520667584.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:39:45.050Z,1520667585.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:39:45.405Z,1520667585.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:39:45.807Z,1520667585.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:39:46.253Z,1520667586.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:39:46.661Z,1520667586.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:39:47.057Z,1520667587.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:39:47.424Z,1520667587.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:39:47.831Z,1520667587.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:39:48.243Z,1520667588.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:39:48.613Z,1520667588.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:39:48.998Z,1520667588.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:39:49.396Z,1520667589.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:39:49.817Z,1520667589.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:39:50.221Z,1520667590.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:39:50.609Z,1520667590.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:39:51.001Z,1520667591.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:39:51.399Z,1520667591.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:39:51.809Z,1520667591.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:39:52.213Z,1520667592.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:39:52.606Z,1520667592.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:39:53.003Z,1520667593.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:39:53.385Z,1520667593.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:39:53.808Z,1520667593.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:39:54.209Z,1520667594.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:39:54.617Z,1520667594.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:39:54.989Z,1520667594.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:39:55.385Z,1520667595.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:39:55.819Z,1520667595.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:39:56.198Z,1520667596.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:39:56.626Z,1520667596.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:39:56.990Z,1520667596.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:40:00.137Z,1520667600.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:40:00.332Z,1520667600.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:40:00.698Z,1520667600.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:40:01.094Z,1520667601.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:40:01.489Z,1520667601.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:40:01.901Z,1520667601.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:40:02.283Z,1520667602.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:40:02.683Z,1520667602.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:40:03.101Z,1520667603.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:40:03.505Z,1520667603.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:40:03.894Z,1520667603.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:40:04.284Z,1520667604.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:40:04.685Z,1520667604.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:40:05.085Z,1520667605.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:40:05.488Z,1520667605.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:40:05.894Z,1520667605.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:40:06.301Z,1520667606.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:40:06.701Z,1520667606.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:40:07.085Z,1520667607.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:40:07.484Z,1520667607.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:40:07.884Z,1520667607.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:40:08.289Z,1520667608.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:40:08.684Z,1520667608.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:40:09.101Z,1520667609.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:40:09.505Z,1520667609.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:40:09.894Z,1520667609.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:40:10.288Z,1520667610.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:40:10.689Z,1520667610.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:40:11.083Z,1520667611.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:40:11.492Z,1520667611.492 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:40:11.492Z,1520667611.492 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 48
2018-03-10T07:40:11.492Z,1520667611.492 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-03-10T07:40:11.494Z,1520667611.494 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:40:11.494Z,1520667611.494 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 48
2018-03-10T07:40:11.494Z,1520667611.494 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-03-10T07:40:11.496Z,1520667611.496 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:40:11.496Z,1520667611.496 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 48
2018-03-10T07:40:11.496Z,1520667611.496 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-10T07:40:11.575Z,1520667611.575 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-03-10T07:40:11.575Z,1520667611.575 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-03-10T07:40:11.576Z,1520667611.576 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-10T07:40:12.007Z,1520667612.007 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-03-10T07:40:12.007Z,1520667612.007 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 48
2018-03-10T07:40:12.008Z,1520667612.008 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-03-10T07:40:12.008Z,1520667612.008 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 48
2018-03-10T07:40:12.008Z,1520667612.008 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-10T07:40:12.008Z,1520667612.008 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 48
2018-03-10T07:40:12.306Z,1520667612.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-03-10T07:40:12.307Z,1520667612.307 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-03-10T07:40:12.307Z,1520667612.307 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-03-10T07:40:12.308Z,1520667612.308 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-03-10T07:40:12.308Z,1520667612.308 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-03-10T07:40:12.308Z,1520667612.308 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-03-10T07:40:12.309Z,1520667612.309 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-10T07:40:12.309Z,1520667612.309 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-10T07:40:12.309Z,1520667612.309 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-10T07:40:12.705Z,1520667612.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-03-10T07:40:12.706Z,1520667612.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:40:13.089Z,1520667613.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-03-10T07:40:13.090Z,1520667613.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:40:13.485Z,1520667613.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-03-10T07:40:13.485Z,1520667613.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:40:13.886Z,1520667613.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-03-10T07:40:13.887Z,1520667613.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:40:14.285Z,1520667614.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-03-10T07:40:14.286Z,1520667614.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:40:14.685Z,1520667614.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-03-10T07:40:14.686Z,1520667614.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:40:15.095Z,1520667615.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-03-10T07:40:15.096Z,1520667615.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:40:15.494Z,1520667615.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-03-10T07:40:15.495Z,1520667615.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:40:15.900Z,1520667615.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-03-10T07:40:15.901Z,1520667615.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:40:16.288Z,1520667616.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-03-10T07:40:16.289Z,1520667616.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:40:16.686Z,1520667616.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-03-10T07:40:16.687Z,1520667616.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:40:17.085Z,1520667617.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-03-10T07:40:17.086Z,1520667617.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:40:17.492Z,1520667617.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-03-10T07:40:17.493Z,1520667617.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:40:17.901Z,1520667617.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-03-10T07:40:17.902Z,1520667617.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:40:18.316Z,1520667618.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-03-10T07:40:18.317Z,1520667618.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:40:18.695Z,1520667618.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-03-10T07:40:18.696Z,1520667618.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:40:19.091Z,1520667619.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-03-10T07:40:19.092Z,1520667619.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:40:19.490Z,1520667619.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-03-10T07:40:19.491Z,1520667619.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:40:19.892Z,1520667619.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-03-10T07:40:19.893Z,1520667619.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:40:20.290Z,1520667620.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-03-10T07:40:20.296Z,1520667620.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:40:20.673Z,1520667620.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-03-10T07:40:20.674Z,1520667620.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:40:21.102Z,1520667621.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-03-10T07:40:21.103Z,1520667621.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:40:21.496Z,1520667621.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-03-10T07:40:21.497Z,1520667621.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:40:21.897Z,1520667621.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-03-10T07:40:21.898Z,1520667621.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:40:22.287Z,1520667622.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-03-10T07:40:22.288Z,1520667622.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:40:22.696Z,1520667622.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-03-10T07:40:22.697Z,1520667622.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:40:23.081Z,1520667623.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-03-10T07:40:23.082Z,1520667623.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:40:23.474Z,1520667623.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-03-10T07:40:23.475Z,1520667623.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:40:23.898Z,1520667623.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-03-10T07:40:23.899Z,1520667623.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:40:24.299Z,1520667624.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-03-10T07:40:24.300Z,1520667624.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:40:24.704Z,1520667624.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-03-10T07:40:24.705Z,1520667624.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:40:25.108Z,1520667625.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-03-10T07:40:25.109Z,1520667625.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:40:25.480Z,1520667625.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-03-10T07:40:25.481Z,1520667625.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:40:25.915Z,1520667625.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-03-10T07:40:25.972Z,1520667625.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:40:26.275Z,1520667626.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-03-10T07:40:26.276Z,1520667626.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:40:26.674Z,1520667626.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-03-10T07:40:26.675Z,1520667626.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:40:27.087Z,1520667627.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-03-10T07:40:27.088Z,1520667627.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:40:27.491Z,1520667627.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-03-10T07:40:27.492Z,1520667627.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:40:27.888Z,1520667627.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-03-10T07:40:27.888Z,1520667627.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:40:28.273Z,1520667628.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-03-10T07:40:28.274Z,1520667628.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:40:28.680Z,1520667628.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-03-10T07:40:28.681Z,1520667628.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:40:29.080Z,1520667629.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-03-10T07:40:29.081Z,1520667629.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:40:29.480Z,1520667629.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-03-10T07:40:29.481Z,1520667629.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:40:29.896Z,1520667629.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2018-03-10T07:40:29.897Z,1520667629.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:40:30.295Z,1520667630.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2018-03-10T07:40:30.296Z,1520667630.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:40:30.697Z,1520667630.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2018-03-10T07:40:30.698Z,1520667630.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:40:31.104Z,1520667631.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2018-03-10T07:40:31.105Z,1520667631.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:40:31.484Z,1520667631.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 20.0 s old, using for 20.0 s.
2018-03-10T07:40:31.484Z,1520667631.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:40:31.885Z,1520667631.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:40:32.290Z,1520667632.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:40:32.692Z,1520667632.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:40:33.099Z,1520667633.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:40:33.505Z,1520667633.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:40:33.898Z,1520667633.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:40:34.289Z,1520667634.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:40:34.693Z,1520667634.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:40:35.093Z,1520667635.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:40:35.492Z,1520667635.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:40:35.899Z,1520667635.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:40:36.301Z,1520667636.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:40:36.698Z,1520667636.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:40:37.105Z,1520667637.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:40:37.509Z,1520667637.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:40:37.874Z,1520667637.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:40:38.274Z,1520667638.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:40:38.676Z,1520667638.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:40:39.099Z,1520667639.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:40:39.497Z,1520667639.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:40:39.901Z,1520667639.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:40:40.300Z,1520667640.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:40:40.697Z,1520667640.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:40:41.075Z,1520667641.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:40:41.473Z,1520667641.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:40:41.901Z,1520667641.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:40:42.300Z,1520667642.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:40:42.703Z,1520667642.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:40:43.073Z,1520667643.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:40:43.481Z,1520667643.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:40:43.908Z,1520667643.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:40:44.312Z,1520667644.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:40:44.681Z,1520667644.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:40:45.112Z,1520667645.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:40:45.504Z,1520667645.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:40:45.906Z,1520667645.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:40:46.277Z,1520667646.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:40:46.681Z,1520667646.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:40:47.085Z,1520667647.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:40:47.476Z,1520667647.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:40:47.906Z,1520667647.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:40:48.305Z,1520667648.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:40:48.706Z,1520667648.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:40:49.074Z,1520667649.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:40:49.477Z,1520667649.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:40:49.915Z,1520667649.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:40:50.316Z,1520667650.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:40:50.677Z,1520667650.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:40:51.090Z,1520667651.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:40:51.490Z,1520667651.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:40:51.890Z,1520667651.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:40:52.276Z,1520667652.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:40:52.678Z,1520667652.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:40:53.082Z,1520667653.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:40:53.479Z,1520667653.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:40:53.910Z,1520667653.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:40:54.290Z,1520667654.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:40:54.708Z,1520667654.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:40:55.079Z,1520667655.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:40:55.477Z,1520667655.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:40:55.877Z,1520667655.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:40:56.282Z,1520667656.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:40:56.685Z,1520667656.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:40:57.135Z,1520667657.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:41:00.241Z,1520667660.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:41:00.413Z,1520667660.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:41:00.816Z,1520667660.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:41:01.192Z,1520667661.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:41:01.594Z,1520667661.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:41:02.017Z,1520667662.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:41:02.444Z,1520667662.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:41:02.820Z,1520667662.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:41:03.194Z,1520667663.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:41:03.593Z,1520667663.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:41:03.994Z,1520667663.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:41:04.393Z,1520667664.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:41:04.822Z,1520667664.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:41:05.221Z,1520667665.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:41:05.621Z,1520667665.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:41:06.001Z,1520667666.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:41:06.397Z,1520667666.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:41:06.823Z,1520667666.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:41:07.222Z,1520667667.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:41:07.622Z,1520667667.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:41:08.025Z,1520667668.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:41:08.401Z,1520667668.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:41:08.822Z,1520667668.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:41:09.224Z,1520667669.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:41:09.622Z,1520667669.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:41:09.994Z,1520667669.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:41:10.394Z,1520667670.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:41:10.820Z,1520667670.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:41:11.222Z,1520667671.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:41:11.622Z,1520667671.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:41:12.001Z,1520667672.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:41:12.401Z,1520667672.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:41:12.849Z,1520667672.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:41:13.223Z,1520667673.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:41:13.603Z,1520667673.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:41:13.999Z,1520667673.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:41:14.397Z,1520667674.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:41:14.810Z,1520667674.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:41:15.231Z,1520667675.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:41:15.603Z,1520667675.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:41:15.999Z,1520667675.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:41:16.400Z,1520667676.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:41:16.809Z,1520667676.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:41:17.209Z,1520667677.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:41:17.603Z,1520667677.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:41:17.998Z,1520667677.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:41:18.398Z,1520667678.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:41:18.808Z,1520667678.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:41:19.204Z,1520667679.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:41:19.605Z,1520667679.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:41:19.000Z,1520667680.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:41:20.399Z,1520667680.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:41:20.804Z,1520667680.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:41:21.208Z,1520667681.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:41:21.604Z,1520667681.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:41:21.999Z,1520667681.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:41:22.402Z,1520667682.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:41:22.803Z,1520667682.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:41:23.204Z,1520667683.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:41:23.608Z,1520667683.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:41:23.998Z,1520667683.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:41:24.401Z,1520667684.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:41:24.804Z,1520667684.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:41:25.208Z,1520667685.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:41:25.611Z,1520667685.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:41:26.036Z,1520667686.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:41:26.395Z,1520667686.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:41:26.806Z,1520667686.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:41:27.207Z,1520667687.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:41:27.605Z,1520667687.605 [BPC1](ERROR): Bank A: No match for stick 6 serial number:1717 in the onboard configuration file.
2018-03-10T07:41:27.605Z,1520667687.605 [BPC1](ERROR): Failed to parse Bank A battery data
2018-03-10T07:41:27.605Z,1520667687.605 [BPC1] Data Fault, FailCount= 1
2018-03-10T07:41:27.605Z,1520667687.605 [BPC1](ERROR): Data Fault
2018-03-10T07:41:27.613Z,1520667687.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:41:27.703Z,1520667687.703 [CBIT](ERROR): Data Fault in component: BPC1
2018-03-10T07:41:28.001Z,1520667688.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:41:28.402Z,1520667688.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:41:28.812Z,1520667688.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:41:28.895Z,1520667688.895 [CBIT](INFO): Clearing failed state for component BPC1
2018-03-10T07:41:28.895Z,1520667688.895 [BPC1] No Fault, FailCount= 1
2018-03-10T07:41:29.282Z,1520667689.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:41:29.610Z,1520667689.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:41:30.001Z,1520667690.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:41:30.398Z,1520667690.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:41:30.817Z,1520667690.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:41:31.209Z,1520667691.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:41:31.617Z,1520667691.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:41:32.004Z,1520667692.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:41:32.405Z,1520667692.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:41:32.810Z,1520667692.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:41:33.217Z,1520667693.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:41:33.607Z,1520667693.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:41:34.002Z,1520667694.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:41:34.401Z,1520667694.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:41:34.852Z,1520667694.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:41:35.210Z,1520667695.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:41:35.610Z,1520667695.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:41:36.002Z,1520667696.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:41:36.400Z,1520667696.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:41:36.811Z,1520667696.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:41:37.214Z,1520667697.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:41:37.611Z,1520667697.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:41:38.003Z,1520667698.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:41:38.402Z,1520667698.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:41:38.812Z,1520667698.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:41:39.212Z,1520667699.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:41:39.606Z,1520667699.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:41:40.008Z,1520667700.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:41:40.402Z,1520667700.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:41:40.817Z,1520667700.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:41:41.211Z,1520667701.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:41:41.613Z,1520667701.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:41:42.001Z,1520667702.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:41:42.400Z,1520667702.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:41:42.814Z,1520667702.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:41:43.220Z,1520667703.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:41:43.621Z,1520667703.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:41:44.008Z,1520667704.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:41:44.411Z,1520667704.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:41:44.817Z,1520667704.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:41:45.215Z,1520667705.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:41:45.610Z,1520667705.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:41:46.007Z,1520667706.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:41:46.390Z,1520667706.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:41:46.824Z,1520667706.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:41:47.285Z,1520667707.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:41:47.666Z,1520667707.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:41:48.024Z,1520667708.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:41:48.395Z,1520667708.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:41:48.835Z,1520667708.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:41:49.232Z,1520667709.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:41:49.632Z,1520667709.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:41:49.999Z,1520667709.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:41:50.436Z,1520667710.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:41:50.799Z,1520667710.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:41:51.244Z,1520667711.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:41:51.613Z,1520667711.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:41:52.005Z,1520667712.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:41:52.406Z,1520667712.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:41:52.812Z,1520667712.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:41:53.213Z,1520667713.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:41:53.607Z,1520667713.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:41:54.003Z,1520667714.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:41:54.400Z,1520667714.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:41:54.808Z,1520667714.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:41:55.213Z,1520667715.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:41:55.613Z,1520667715.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:41:56.002Z,1520667716.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:41:56.400Z,1520667716.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:41:56.812Z,1520667716.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:41:57.225Z,1520667717.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:42:00.344Z,1520667720.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:42:00.525Z,1520667720.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:42:00.894Z,1520667720.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:42:01.297Z,1520667721.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:42:01.681Z,1520667721.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:42:02.102Z,1520667722.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:42:02.506Z,1520667722.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:42:02.905Z,1520667722.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:42:03.301Z,1520667723.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:42:03.678Z,1520667723.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:42:04.085Z,1520667724.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:42:04.478Z,1520667724.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:42:04.903Z,1520667724.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:42:05.305Z,1520667725.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:42:05.707Z,1520667725.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:42:06.085Z,1520667726.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:42:06.477Z,1520667726.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:42:06.875Z,1520667726.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:42:07.280Z,1520667727.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:42:07.677Z,1520667727.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:42:08.109Z,1520667728.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:42:08.510Z,1520667728.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:42:08.910Z,1520667728.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:42:09.286Z,1520667729.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:42:09.685Z,1520667729.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:42:10.083Z,1520667730.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:42:10.482Z,1520667730.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:42:10.910Z,1520667730.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:42:11.312Z,1520667731.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:42:11.711Z,1520667731.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:42:12.079Z,1520667732.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:42:12.488Z,1520667732.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:42:12.933Z,1520667732.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:42:13.317Z,1520667733.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:42:13.686Z,1520667733.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:42:14.093Z,1520667734.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:42:14.495Z,1520667734.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:42:14.897Z,1520667734.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:42:15.285Z,1520667735.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:42:15.681Z,1520667735.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:42:16.085Z,1520667736.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:42:16.487Z,1520667736.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:42:16.890Z,1520667736.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:42:17.297Z,1520667737.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:42:17.697Z,1520667737.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:42:18.081Z,1520667738.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:42:18.485Z,1520667738.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:42:18.887Z,1520667738.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:42:19.283Z,1520667739.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:42:19.685Z,1520667739.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:42:20.115Z,1520667740.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:42:20.497Z,1520667740.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:42:20.897Z,1520667740.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:42:21.287Z,1520667741.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:42:21.688Z,1520667741.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:42:22.086Z,1520667742.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:42:22.486Z,1520667742.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:42:22.892Z,1520667742.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:42:23.297Z,1520667743.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:42:23.691Z,1520667743.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:42:24.087Z,1520667744.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:42:24.486Z,1520667744.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:42:24.887Z,1520667744.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:42:25.295Z,1520667745.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:42:25.733Z,1520667745.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:42:26.118Z,1520667746.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:42:26.495Z,1520667746.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:42:26.897Z,1520667746.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:42:27.286Z,1520667747.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:42:27.688Z,1520667747.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:42:28.086Z,1520667748.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:42:28.487Z,1520667748.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:42:28.889Z,1520667748.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:42:29.297Z,1520667749.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:42:29.697Z,1520667749.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:42:30.087Z,1520667750.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:42:30.488Z,1520667750.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:42:30.886Z,1520667750.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:42:31.282Z,1520667751.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:42:31.691Z,1520667751.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:42:32.097Z,1520667752.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:42:32.501Z,1520667752.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:42:32.897Z,1520667752.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:42:33.290Z,1520667753.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:42:33.687Z,1520667753.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:42:34.087Z,1520667754.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:42:34.486Z,1520667754.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:42:34.891Z,1520667754.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:42:35.297Z,1520667755.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:42:35.697Z,1520667755.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:42:36.088Z,1520667756.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:42:36.485Z,1520667756.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:42:36.889Z,1520667756.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:42:37.290Z,1520667757.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:42:37.699Z,1520667757.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:42:38.130Z,1520667758.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:42:38.494Z,1520667758.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:42:38.901Z,1520667758.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:42:39.291Z,1520667759.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:42:39.685Z,1520667759.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:42:40.088Z,1520667760.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:42:40.487Z,1520667760.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:42:40.901Z,1520667760.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:42:41.293Z,1520667761.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:42:41.695Z,1520667761.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:42:42.097Z,1520667762.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:42:42.486Z,1520667762.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:42:42.900Z,1520667762.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:42:43.282Z,1520667763.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:42:43.685Z,1520667763.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:42:44.096Z,1520667764.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:42:44.494Z,1520667764.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:42:44.895Z,1520667764.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:42:45.287Z,1520667765.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:42:45.682Z,1520667765.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:42:46.093Z,1520667766.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:42:46.487Z,1520667766.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:42:46.901Z,1520667766.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:42:47.294Z,1520667767.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:42:47.696Z,1520667767.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:42:48.083Z,1520667768.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:42:48.493Z,1520667768.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:42:48.897Z,1520667768.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:42:49.284Z,1520667769.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:42:49.686Z,1520667769.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:42:50.101Z,1520667770.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:42:50.552Z,1520667770.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:42:50.930Z,1520667770.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:42:51.289Z,1520667771.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:42:51.688Z,1520667771.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:42:52.094Z,1520667772.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:42:52.492Z,1520667772.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:42:52.891Z,1520667772.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:42:53.298Z,1520667773.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:42:53.694Z,1520667773.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:42:54.089Z,1520667774.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:42:54.487Z,1520667774.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:42:54.889Z,1520667774.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:42:55.291Z,1520667775.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:42:55.688Z,1520667775.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:42:56.095Z,1520667776.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:42:56.503Z,1520667776.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:42:56.905Z,1520667776.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:42:57.291Z,1520667777.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:43:00.433Z,1520667780.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:43:00.593Z,1520667780.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:43:00.999Z,1520667780.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:43:01.395Z,1520667781.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:43:01.800Z,1520667781.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:43:02.205Z,1520667782.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:43:02.596Z,1520667782.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:43:02.989Z,1520667782.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:43:03.388Z,1520667783.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:43:03.795Z,1520667783.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:43:04.197Z,1520667784.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:43:04.596Z,1520667784.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:43:04.987Z,1520667784.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:43:05.389Z,1520667785.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:43:05.795Z,1520667785.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:43:06.190Z,1520667786.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:43:06.597Z,1520667786.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:43:06.992Z,1520667786.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:43:07.388Z,1520667787.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:43:07.792Z,1520667787.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:43:08.196Z,1520667788.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:43:08.591Z,1520667788.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:43:08.970Z,1520667788.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:43:09.369Z,1520667789.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:43:09.791Z,1520667789.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:43:10.197Z,1520667790.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:43:10.600Z,1520667790.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:43:10.994Z,1520667790.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:43:11.396Z,1520667791.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:43:11.800Z,1520667791.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:43:12.201Z,1520667792.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:43:12.590Z,1520667792.590 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:43:12.590Z,1520667792.590 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 49
2018-03-10T07:43:12.590Z,1520667792.590 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-03-10T07:43:12.592Z,1520667792.592 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:43:12.592Z,1520667792.592 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 49
2018-03-10T07:43:12.593Z,1520667792.593 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-03-10T07:43:12.594Z,1520667792.594 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:43:12.594Z,1520667792.594 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 49
2018-03-10T07:43:12.594Z,1520667792.594 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-10T07:43:12.680Z,1520667792.680 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-03-10T07:43:12.680Z,1520667792.680 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-03-10T07:43:12.680Z,1520667792.680 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-10T07:43:13.059Z,1520667793.059 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-03-10T07:43:13.059Z,1520667793.059 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 49
2018-03-10T07:43:13.059Z,1520667793.059 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-03-10T07:43:13.059Z,1520667793.059 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 49
2018-03-10T07:43:13.060Z,1520667793.060 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-10T07:43:13.060Z,1520667793.060 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 49
2018-03-10T07:43:13.375Z,1520667793.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-03-10T07:43:13.376Z,1520667793.376 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-03-10T07:43:13.376Z,1520667793.376 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-03-10T07:43:13.377Z,1520667793.377 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-03-10T07:43:13.377Z,1520667793.377 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-03-10T07:43:13.377Z,1520667793.377 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-03-10T07:43:13.378Z,1520667793.378 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-10T07:43:13.378Z,1520667793.378 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-10T07:43:13.378Z,1520667793.378 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-10T07:43:13.786Z,1520667793.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-03-10T07:43:13.787Z,1520667793.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:43:14.185Z,1520667794.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-03-10T07:43:14.186Z,1520667794.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:43:14.582Z,1520667794.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-03-10T07:43:14.584Z,1520667794.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:43:15.040Z,1520667795.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-03-10T07:43:15.041Z,1520667795.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:43:15.397Z,1520667795.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-03-10T07:43:15.398Z,1520667795.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:43:15.792Z,1520667795.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-03-10T07:43:15.793Z,1520667795.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:43:16.196Z,1520667796.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-03-10T07:43:16.197Z,1520667796.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:43:16.591Z,1520667796.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-03-10T07:43:16.592Z,1520667796.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:43:16.990Z,1520667796.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-03-10T07:43:16.992Z,1520667796.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:43:17.369Z,1520667797.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-03-10T07:43:17.370Z,1520667797.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:43:17.793Z,1520667797.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-03-10T07:43:17.794Z,1520667797.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:43:18.191Z,1520667798.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-03-10T07:43:18.192Z,1520667798.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:43:18.591Z,1520667798.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-03-10T07:43:18.592Z,1520667798.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:43:18.974Z,1520667798.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-03-10T07:43:18.993Z,1520667798.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:43:19.392Z,1520667799.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-03-10T07:43:19.393Z,1520667799.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:43:19.798Z,1520667799.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-03-10T07:43:19.799Z,1520667799.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:43:20.199Z,1520667800.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-03-10T07:43:20.200Z,1520667800.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:43:20.576Z,1520667800.576 [BPC1](ERROR): Failed to receive battery data
2018-03-10T07:43:20.576Z,1520667800.576 [BPC1] Communications Fault, FailCount= 1
2018-03-10T07:43:20.576Z,1520667800.576 [BPC1](ERROR): Communications Fault
2018-03-10T07:43:20.606Z,1520667800.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-03-10T07:43:20.607Z,1520667800.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:43:20.687Z,1520667800.687 [CBIT](ERROR): Communications Fault in component: BPC1
2018-03-10T07:43:20.976Z,1520667800.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-03-10T07:43:20.977Z,1520667800.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:43:21.376Z,1520667801.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-03-10T07:43:21.377Z,1520667801.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:43:21.797Z,1520667801.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-03-10T07:43:21.798Z,1520667801.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:43:21.875Z,1520667801.875 [CBIT](INFO): Clearing failed state for component BPC1
2018-03-10T07:43:21.875Z,1520667801.875 [BPC1] No Fault, FailCount= 1
2018-03-10T07:43:22.247Z,1520667802.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.7 s old, using for 20.0 s.
2018-03-10T07:43:22.248Z,1520667802.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:43:22.597Z,1520667802.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-03-10T07:43:22.598Z,1520667802.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:43:22.974Z,1520667802.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-03-10T07:43:22.975Z,1520667802.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:43:23.373Z,1520667803.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-03-10T07:43:23.374Z,1520667803.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:43:23.795Z,1520667803.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-03-10T07:43:23.796Z,1520667803.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:43:24.195Z,1520667804.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-03-10T07:43:24.196Z,1520667804.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:43:24.593Z,1520667804.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-03-10T07:43:24.594Z,1520667804.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:43:24.974Z,1520667804.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-03-10T07:43:24.975Z,1520667804.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:43:25.397Z,1520667805.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-03-10T07:43:25.397Z,1520667805.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:43:25.802Z,1520667805.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-03-10T07:43:25.803Z,1520667805.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:43:26.203Z,1520667806.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-03-10T07:43:26.204Z,1520667806.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:43:26.602Z,1520667806.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-03-10T07:43:26.603Z,1520667806.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:43:26.976Z,1520667806.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-03-10T07:43:26.977Z,1520667806.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:43:27.380Z,1520667807.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-03-10T07:43:27.381Z,1520667807.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:43:27.801Z,1520667807.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-03-10T07:43:27.802Z,1520667807.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:43:28.202Z,1520667808.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-03-10T07:43:28.207Z,1520667808.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:43:28.586Z,1520667808.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-03-10T07:43:28.609Z,1520667808.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:43:28.973Z,1520667808.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-03-10T07:43:28.974Z,1520667808.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:43:29.380Z,1520667809.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-03-10T07:43:29.381Z,1520667809.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:43:29.804Z,1520667809.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-03-10T07:43:29.805Z,1520667809.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:43:30.186Z,1520667810.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-03-10T07:43:30.208Z,1520667810.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:43:30.582Z,1520667810.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-03-10T07:43:30.583Z,1520667810.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:43:30.979Z,1520667810.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2018-03-10T07:43:30.980Z,1520667810.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:43:31.378Z,1520667811.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2018-03-10T07:43:31.378Z,1520667811.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:43:31.783Z,1520667811.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2018-03-10T07:43:31.784Z,1520667811.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:43:32.184Z,1520667812.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2018-03-10T07:43:32.185Z,1520667812.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:43:32.582Z,1520667812.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 20.0 s old, using for 20.0 s.
2018-03-10T07:43:32.584Z,1520667812.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:43:32.978Z,1520667812.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:43:33.384Z,1520667813.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:43:33.783Z,1520667813.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:43:34.182Z,1520667814.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:43:34.582Z,1520667814.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:43:34.979Z,1520667814.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:43:35.378Z,1520667815.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:43:35.788Z,1520667815.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:43:36.182Z,1520667816.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:43:36.583Z,1520667816.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:43:36.979Z,1520667816.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:43:37.380Z,1520667817.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:43:37.783Z,1520667817.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:43:38.182Z,1520667818.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:43:38.583Z,1520667818.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:43:38.978Z,1520667818.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:43:39.378Z,1520667819.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:43:39.786Z,1520667819.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:43:40.189Z,1520667820.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:43:40.587Z,1520667820.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:43:40.978Z,1520667820.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:43:41.379Z,1520667821.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:43:41.786Z,1520667821.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:43:42.182Z,1520667822.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:43:42.589Z,1520667822.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:43:42.980Z,1520667822.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:43:43.381Z,1520667823.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:43:43.785Z,1520667823.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:43:44.193Z,1520667824.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:43:44.596Z,1520667824.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:43:44.981Z,1520667824.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:43:45.385Z,1520667825.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:43:45.793Z,1520667825.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:43:46.185Z,1520667826.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:43:46.636Z,1520667826.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:43:46.993Z,1520667826.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:43:47.370Z,1520667827.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:43:47.813Z,1520667827.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:43:48.208Z,1520667828.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:43:48.603Z,1520667828.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:43:48.978Z,1520667828.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:43:49.375Z,1520667829.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:43:49.790Z,1520667829.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:43:50.231Z,1520667830.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:43:50.611Z,1520667830.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:43:50.989Z,1520667830.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:43:51.378Z,1520667831.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:43:51.789Z,1520667831.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:43:52.183Z,1520667832.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:43:52.576Z,1520667832.576 [BPC1](FAULT): Failed to initialize
2018-03-10T07:43:52.576Z,1520667832.576 [BPC1] Communications Fault, FailCount= 2
2018-03-10T07:43:52.576Z,1520667832.576 [BPC1](ERROR): Communications Fault
2018-03-10T07:43:52.584Z,1520667832.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:43:52.659Z,1520667832.659 [CBIT](ERROR): Communications Fault in component: BPC1
2018-03-10T07:43:52.978Z,1520667832.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:43:53.385Z,1520667833.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:43:53.787Z,1520667833.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:43:53.863Z,1520667833.863 [CBIT](INFO): Clearing failed state for component BPC1
2018-03-10T07:43:53.863Z,1520667833.863 [BPC1] No Fault, FailCount= 2
2018-03-10T07:43:54.245Z,1520667834.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:43:54.593Z,1520667834.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:43:54.982Z,1520667834.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:43:55.379Z,1520667835.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:43:55.797Z,1520667835.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:43:56.190Z,1520667836.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:43:56.597Z,1520667836.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:43:56.600Z,1520667836.600 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-03-10T07:43:56.600Z,1520667836.600 [Default:CheckIn:C.Wait] Stopped
2018-03-10T07:43:56.600Z,1520667836.600 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-03-10T07:43:56.600Z,1520667836.600 [Default:CheckIn:D] Running Loop=1
2018-03-10T07:43:56.980Z,1520667836.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:43:56.983Z,1520667836.983 [Default:CheckIn:D] Stopped
2018-03-10T07:43:56.983Z,1520667836.983 [Default:CheckIn:E] Running Loop=1
2018-03-10T07:43:57.381Z,1520667837.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:43:57.384Z,1520667837.384 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 144.651025 min 
2018-03-10T07:43:57.385Z,1520667837.385 [Default:CheckIn:E] Stopped
2018-03-10T07:43:57.385Z,1520667837.385 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-03-10T07:43:57.385Z,1520667837.385 [Default:CheckIn] Stopped
2018-03-10T07:43:57.385Z,1520667837.385 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-03-10T07:43:57.385Z,1520667837.385 [Default:CheckIn](INFO): Running loop #15
2018-03-10T07:43:57.385Z,1520667837.385 [Default:CheckIn] Running Loop=15
2018-03-10T07:43:57.385Z,1520667837.385 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-03-10T07:43:57.385Z,1520667837.385 [Default:CheckIn:Read_GPS] Running Loop=1
2018-03-10T07:44:00.493Z,1520667840.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:44:00.657Z,1520667840.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:44:01.048Z,1520667841.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:44:01.434Z,1520667841.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:44:01.853Z,1520667841.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:44:02.230Z,1520667842.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:44:02.636Z,1520667842.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:44:03.044Z,1520667843.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:44:03.458Z,1520667843.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:44:03.837Z,1520667843.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:44:04.238Z,1520667844.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:44:04.642Z,1520667844.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:44:05.029Z,1520667845.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:44:05.431Z,1520667845.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:44:05.925Z,1520667845.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:44:06.245Z,1520667846.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:44:06.689Z,1520667846.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:44:07.049Z,1520667847.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:44:07.441Z,1520667847.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:44:07.853Z,1520667847.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:44:08.249Z,1520667848.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:44:08.669Z,1520667848.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:44:09.046Z,1520667849.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:44:09.429Z,1520667849.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:44:09.817Z,1520667849.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:44:10.225Z,1520667850.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:44:10.649Z,1520667850.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:44:11.054Z,1520667851.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:44:11.456Z,1520667851.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:44:11.851Z,1520667851.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:44:12.225Z,1520667852.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:44:12.638Z,1520667852.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:44:13.028Z,1520667853.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:44:13.426Z,1520667853.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:44:13.840Z,1520667853.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:44:14.236Z,1520667854.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:44:14.641Z,1520667854.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:44:15.033Z,1520667855.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:44:15.432Z,1520667855.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:44:15.853Z,1520667855.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:44:16.245Z,1520667856.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:44:16.627Z,1520667856.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:44:17.041Z,1520667857.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:44:17.441Z,1520667857.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:44:17.864Z,1520667857.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:44:18.226Z,1520667858.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:44:18.632Z,1520667858.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:44:19.033Z,1520667859.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:44:19.447Z,1520667859.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:44:19.840Z,1520667859.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:44:20.244Z,1520667860.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:44:20.649Z,1520667860.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:44:21.045Z,1520667861.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:44:21.434Z,1520667861.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:44:21.828Z,1520667861.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:44:22.233Z,1520667862.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:44:22.646Z,1520667862.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:44:23.036Z,1520667863.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:44:23.442Z,1520667863.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:44:23.849Z,1520667863.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:44:24.231Z,1520667864.231 [BPC1](FAULT): Failed to initialize
2018-03-10T07:44:24.231Z,1520667864.231 [BPC1] Communications Fault, FailCount= 3
2018-03-10T07:44:24.232Z,1520667864.232 [BPC1](ERROR): Communications Fault
2018-03-10T07:44:24.247Z,1520667864.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:44:24.351Z,1520667864.351 [CBIT](ERROR): Communications Fault in component: BPC1
2018-03-10T07:44:24.627Z,1520667864.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:44:25.036Z,1520667865.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:44:25.432Z,1520667865.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:44:25.511Z,1520667865.511 [CBIT](INFO): Clearing failed state for component BPC1
2018-03-10T07:44:25.511Z,1520667865.511 [BPC1] No Fault, FailCount= 3
2018-03-10T07:44:25.901Z,1520667865.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:44:26.247Z,1520667866.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:44:26.639Z,1520667866.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:44:27.033Z,1520667867.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:44:27.453Z,1520667867.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:44:27.823Z,1520667867.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:44:28.230Z,1520667868.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:44:28.634Z,1520667868.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:44:29.067Z,1520667869.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:44:29.442Z,1520667869.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:44:29.845Z,1520667869.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:44:30.249Z,1520667870.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:44:30.645Z,1520667870.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:44:31.028Z,1520667871.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:44:31.432Z,1520667871.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:44:31.841Z,1520667871.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:44:32.266Z,1520667872.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:44:32.644Z,1520667872.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:44:33.030Z,1520667873.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:44:33.434Z,1520667873.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:44:33.841Z,1520667873.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:44:34.227Z,1520667874.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:44:34.633Z,1520667874.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:44:35.038Z,1520667875.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:44:35.465Z,1520667875.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:44:35.844Z,1520667875.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:44:36.223Z,1520667876.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:44:36.632Z,1520667876.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:44:37.028Z,1520667877.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:44:37.428Z,1520667877.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:44:37.842Z,1520667877.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:44:38.242Z,1520667878.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:44:38.667Z,1520667878.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:44:39.026Z,1520667879.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:44:39.433Z,1520667879.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:44:39.832Z,1520667879.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:44:40.226Z,1520667880.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:44:40.629Z,1520667880.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:44:41.039Z,1520667881.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:44:41.442Z,1520667881.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:44:41.867Z,1520667881.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:44:42.223Z,1520667882.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:44:42.629Z,1520667882.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:44:43.040Z,1520667883.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:44:43.430Z,1520667883.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:44:43.844Z,1520667883.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:44:44.245Z,1520667884.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:44:44.642Z,1520667884.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:44:45.029Z,1520667885.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:44:45.433Z,1520667885.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:44:45.836Z,1520667885.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:44:46.233Z,1520667886.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:44:46.641Z,1520667886.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:44:47.044Z,1520667887.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:44:47.442Z,1520667887.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:44:47.846Z,1520667887.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:44:48.233Z,1520667888.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:44:48.631Z,1520667888.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:44:49.036Z,1520667889.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:44:49.440Z,1520667889.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:44:49.839Z,1520667889.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:44:50.245Z,1520667890.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:44:50.645Z,1520667890.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:44:51.040Z,1520667891.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:44:51.418Z,1520667891.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:44:51.852Z,1520667891.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:44:52.253Z,1520667892.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:44:52.649Z,1520667892.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:44:53.047Z,1520667893.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:44:53.422Z,1520667893.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:44:53.823Z,1520667893.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:44:54.227Z,1520667894.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:44:54.629Z,1520667894.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:44:55.056Z,1520667895.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:44:55.455Z,1520667895.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:44:55.836Z,1520667895.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:44:56.231Z,1520667896.231 [BPC1](FAULT): Failed to initialize
2018-03-10T07:44:56.231Z,1520667896.231 [BPC1] Communications Fault, FailCount= 4
2018-03-10T07:44:56.231Z,1520667896.231 [BPC1](ERROR): Communications Fault
2018-03-10T07:44:56.273Z,1520667896.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:44:56.359Z,1520667896.359 [CBIT](ERROR): Communications Fault in component: BPC1
2018-03-10T07:44:56.623Z,1520667896.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:44:57.033Z,1520667897.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:44:57.433Z,1520667897.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:44:57.515Z,1520667897.515 [CBIT](INFO): Clearing failed state for component BPC1
2018-03-10T07:44:57.515Z,1520667897.515 [BPC1] No Fault, FailCount= 4
2018-03-10T07:45:00.601Z,1520667900.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:45:00.769Z,1520667900.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:45:01.173Z,1520667901.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:45:01.535Z,1520667901.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:45:01.941Z,1520667901.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:45:02.340Z,1520667902.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:45:02.738Z,1520667902.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:45:03.166Z,1520667903.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:45:03.567Z,1520667903.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:45:03.965Z,1520667903.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:45:04.345Z,1520667904.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:45:04.739Z,1520667904.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:45:05.139Z,1520667905.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:45:05.540Z,1520667905.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:45:05.967Z,1520667905.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:45:06.366Z,1520667906.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:45:06.763Z,1520667906.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:45:07.136Z,1520667907.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:45:07.537Z,1520667907.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:45:07.965Z,1520667907.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:45:08.338Z,1520667908.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:45:08.742Z,1520667908.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:45:09.172Z,1520667909.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:45:09.567Z,1520667909.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:45:09.975Z,1520667909.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:45:10.346Z,1520667910.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:45:10.745Z,1520667910.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:45:11.143Z,1520667911.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:45:11.549Z,1520667911.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:45:11.975Z,1520667911.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:45:12.355Z,1520667912.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:45:12.750Z,1520667912.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:45:13.147Z,1520667913.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:45:13.541Z,1520667913.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:45:13.948Z,1520667913.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:45:14.348Z,1520667914.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:45:14.743Z,1520667914.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:45:15.157Z,1520667915.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:45:15.550Z,1520667915.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:45:15.950Z,1520667915.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:45:16.345Z,1520667916.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:45:16.745Z,1520667916.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:45:17.142Z,1520667917.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:45:17.545Z,1520667917.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:45:17.950Z,1520667917.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:45:18.354Z,1520667918.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:45:18.757Z,1520667918.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:45:19.147Z,1520667919.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:45:19.543Z,1520667919.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:45:19.945Z,1520667919.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:45:20.348Z,1520667920.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:45:20.743Z,1520667920.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:45:21.157Z,1520667921.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:45:21.550Z,1520667921.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:45:21.949Z,1520667921.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:45:22.345Z,1520667922.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:45:22.747Z,1520667922.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:45:23.148Z,1520667923.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:45:23.546Z,1520667923.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:45:23.950Z,1520667923.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:45:24.354Z,1520667924.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:45:24.757Z,1520667924.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:45:25.142Z,1520667925.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:45:25.548Z,1520667925.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:45:25.945Z,1520667925.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:45:26.346Z,1520667926.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:45:26.748Z,1520667926.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:45:26.827Z,1520667926.827 [CBIT](DEBUG): EFC running - data check-sum false
2018-03-10T07:45:27.157Z,1520667927.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:45:27.578Z,1520667927.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:45:27.951Z,1520667927.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:45:28.347Z,1520667928.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:45:28.747Z,1520667928.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:45:29.147Z,1520667929.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:45:29.545Z,1520667929.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:45:29.950Z,1520667929.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:45:30.357Z,1520667930.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:45:30.757Z,1520667930.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:45:31.146Z,1520667931.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:45:31.553Z,1520667931.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:45:31.945Z,1520667931.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:45:32.347Z,1520667932.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:45:32.751Z,1520667932.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:45:33.181Z,1520667933.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:45:33.560Z,1520667933.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:45:33.953Z,1520667933.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:45:34.353Z,1520667934.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:45:34.752Z,1520667934.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:45:35.148Z,1520667935.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:45:35.546Z,1520667935.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:45:35.960Z,1520667935.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:45:36.353Z,1520667936.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:45:36.761Z,1520667936.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:45:37.153Z,1520667937.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:45:37.545Z,1520667937.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:45:37.946Z,1520667937.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:45:38.348Z,1520667938.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:45:38.753Z,1520667938.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:45:39.154Z,1520667939.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:45:39.561Z,1520667939.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:45:39.989Z,1520667939.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:45:40.353Z,1520667940.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:45:40.747Z,1520667940.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:45:41.149Z,1520667941.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:45:41.547Z,1520667941.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:45:41.960Z,1520667941.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:45:42.365Z,1520667942.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:45:42.758Z,1520667942.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:45:43.152Z,1520667943.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:45:43.546Z,1520667943.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:45:43.953Z,1520667943.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:45:44.361Z,1520667944.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:45:44.750Z,1520667944.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:45:45.159Z,1520667945.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:45:45.561Z,1520667945.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:45:45.965Z,1520667945.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:45:46.347Z,1520667946.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:45:46.761Z,1520667946.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:45:47.152Z,1520667947.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:45:47.556Z,1520667947.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:45:47.970Z,1520667947.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:45:48.366Z,1520667948.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:45:48.758Z,1520667948.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:45:49.165Z,1520667949.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:45:49.555Z,1520667949.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:45:49.955Z,1520667949.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:45:50.363Z,1520667950.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:45:50.781Z,1520667950.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:45:51.173Z,1520667951.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:45:51.576Z,1520667951.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:45:51.982Z,1520667951.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:45:52.372Z,1520667952.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:45:52.746Z,1520667952.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:45:53.145Z,1520667953.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:45:53.546Z,1520667953.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:45:53.951Z,1520667953.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:45:54.351Z,1520667954.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:45:54.757Z,1520667954.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:45:55.176Z,1520667955.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:45:55.577Z,1520667955.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:45:55.989Z,1520667955.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:45:56.347Z,1520667956.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:45:56.771Z,1520667956.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:45:57.150Z,1520667957.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:45:57.551Z,1520667957.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:46:00.908Z,1520667960.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:46:01.052Z,1520667961.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:46:01.461Z,1520667961.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:46:01.874Z,1520667961.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:46:02.261Z,1520667962.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:46:02.660Z,1520667962.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:46:03.048Z,1520667963.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:46:03.461Z,1520667963.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:46:03.858Z,1520667963.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:46:04.259Z,1520667964.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:46:04.665Z,1520667964.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:46:05.061Z,1520667965.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:46:05.450Z,1520667965.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:46:05.855Z,1520667965.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:46:06.255Z,1520667966.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:46:06.663Z,1520667966.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:46:07.081Z,1520667967.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:46:07.462Z,1520667967.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:46:07.859Z,1520667967.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:46:08.259Z,1520667968.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:46:08.660Z,1520667968.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:46:09.055Z,1520667969.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:46:09.454Z,1520667969.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:46:09.872Z,1520667969.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:46:10.261Z,1520667970.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:46:10.665Z,1520667970.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:46:11.059Z,1520667971.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:46:11.468Z,1520667971.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:46:11.854Z,1520667971.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:46:12.242Z,1520667972.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:46:12.638Z,1520667972.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:46:13.064Z,1520667973.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:46:13.466Z,1520667973.466 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:46:13.467Z,1520667973.467 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 50
2018-03-10T07:46:13.467Z,1520667973.467 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-03-10T07:46:13.468Z,1520667973.468 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:46:13.469Z,1520667973.469 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 50
2018-03-10T07:46:13.469Z,1520667973.469 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-03-10T07:46:13.470Z,1520667973.470 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:46:13.470Z,1520667973.470 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 50
2018-03-10T07:46:13.471Z,1520667973.471 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-10T07:46:13.559Z,1520667973.559 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-03-10T07:46:13.559Z,1520667973.559 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-03-10T07:46:13.559Z,1520667973.559 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-10T07:46:13.935Z,1520667973.935 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-03-10T07:46:13.935Z,1520667973.935 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 50
2018-03-10T07:46:13.936Z,1520667973.936 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-03-10T07:46:13.936Z,1520667973.936 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 50
2018-03-10T07:46:13.936Z,1520667973.936 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-10T07:46:13.936Z,1520667973.936 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 50
2018-03-10T07:46:14.246Z,1520667974.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-03-10T07:46:14.246Z,1520667974.246 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-03-10T07:46:14.246Z,1520667974.246 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-03-10T07:46:14.263Z,1520667974.263 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-03-10T07:46:14.263Z,1520667974.263 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-03-10T07:46:14.264Z,1520667974.264 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-03-10T07:46:14.264Z,1520667974.264 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-10T07:46:14.264Z,1520667974.264 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-10T07:46:14.265Z,1520667974.265 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-10T07:46:14.669Z,1520667974.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-03-10T07:46:14.670Z,1520667974.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:46:15.042Z,1520667975.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-03-10T07:46:15.044Z,1520667975.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:46:15.442Z,1520667975.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-03-10T07:46:15.443Z,1520667975.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:46:15.871Z,1520667975.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-03-10T07:46:15.872Z,1520667975.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:46:16.272Z,1520667976.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-03-10T07:46:16.273Z,1520667976.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:46:16.667Z,1520667976.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-03-10T07:46:16.668Z,1520667976.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:46:17.045Z,1520667977.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-03-10T07:46:17.046Z,1520667977.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:46:17.462Z,1520667977.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-03-10T07:46:17.462Z,1520667977.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:46:17.888Z,1520667977.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-03-10T07:46:17.889Z,1520667977.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:46:18.277Z,1520667978.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-03-10T07:46:18.277Z,1520667978.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:46:18.640Z,1520667978.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-03-10T07:46:18.641Z,1520667978.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:46:19.057Z,1520667979.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-03-10T07:46:19.057Z,1520667979.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:46:19.474Z,1520667979.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-03-10T07:46:19.475Z,1520667979.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:46:19.854Z,1520667979.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-03-10T07:46:19.855Z,1520667979.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:46:20.245Z,1520667980.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-03-10T07:46:20.246Z,1520667980.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:46:20.656Z,1520667980.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-03-10T07:46:20.657Z,1520667980.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:46:21.074Z,1520667981.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-03-10T07:46:21.076Z,1520667981.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:46:21.446Z,1520667981.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-03-10T07:46:21.447Z,1520667981.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:46:21.858Z,1520667981.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-03-10T07:46:21.859Z,1520667981.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:46:22.259Z,1520667982.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-03-10T07:46:22.260Z,1520667982.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:46:22.680Z,1520667982.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-03-10T07:46:22.681Z,1520667982.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:46:23.049Z,1520667983.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-03-10T07:46:23.050Z,1520667983.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:46:23.448Z,1520667983.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 0.398778 seconds old.
2018-03-10T07:46:23.448Z,1520667983.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-03-10T07:46:23.449Z,1520667983.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:46:23.450Z,1520667983.450 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 0.398873 seconds old.
2018-03-10T07:46:23.451Z,1520667983.451 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 0.399358 seconds old.
2018-03-10T07:46:23.850Z,1520667983.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 0.801554 seconds old.
2018-03-10T07:46:23.851Z,1520667983.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-03-10T07:46:23.852Z,1520667983.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:46:23.853Z,1520667983.853 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 0.801896 seconds old.
2018-03-10T07:46:23.854Z,1520667983.854 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 0.802193 seconds old.
2018-03-10T07:46:24.260Z,1520667984.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 1.210675 seconds old.
2018-03-10T07:46:24.260Z,1520667984.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-03-10T07:46:24.261Z,1520667984.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:46:24.262Z,1520667984.262 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 1.210775 seconds old.
2018-03-10T07:46:24.279Z,1520667984.279 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 1.227350 seconds old.
2018-03-10T07:46:24.649Z,1520667984.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-03-10T07:46:24.650Z,1520667984.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:46:25.060Z,1520667985.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-03-10T07:46:25.061Z,1520667985.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:46:25.480Z,1520667985.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-03-10T07:46:25.481Z,1520667985.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:46:25.880Z,1520667985.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-03-10T07:46:25.881Z,1520667985.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:46:26.260Z,1520667986.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-03-10T07:46:26.261Z,1520667986.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:46:26.647Z,1520667986.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-03-10T07:46:26.648Z,1520667986.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:46:27.046Z,1520667987.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-03-10T07:46:27.047Z,1520667987.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:46:27.460Z,1520667987.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-03-10T07:46:27.461Z,1520667987.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:46:27.860Z,1520667987.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-03-10T07:46:27.860Z,1520667987.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:46:28.264Z,1520667988.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-03-10T07:46:28.265Z,1520667988.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:46:28.654Z,1520667988.654 [BPC1](ERROR): Bank A: No match for stick 2 serial number:1717 in the onboard configuration file.
2018-03-10T07:46:28.655Z,1520667988.655 [BPC1](ERROR): Failed to parse Bank A battery data
2018-03-10T07:46:28.655Z,1520667988.655 [BPC1] Data Fault, FailCount= 1
2018-03-10T07:46:28.655Z,1520667988.655 [BPC1](ERROR): Data Fault
2018-03-10T07:46:28.662Z,1520667988.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-03-10T07:46:28.663Z,1520667988.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:46:28.768Z,1520667988.768 [CBIT](ERROR): Data Fault in component: BPC1
2018-03-10T07:46:29.064Z,1520667989.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-03-10T07:46:29.065Z,1520667989.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:46:29.448Z,1520667989.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-03-10T07:46:29.449Z,1520667989.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:46:29.848Z,1520667989.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-03-10T07:46:29.849Z,1520667989.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:46:29.927Z,1520667989.927 [CBIT](INFO): Clearing failed state for component BPC1
2018-03-10T07:46:29.927Z,1520667989.927 [BPC1] No Fault, FailCount= 1
2018-03-10T07:46:30.297Z,1520667990.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-03-10T07:46:30.298Z,1520667990.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:46:30.660Z,1520667990.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-03-10T07:46:30.661Z,1520667990.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:46:31.057Z,1520667991.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-03-10T07:46:31.058Z,1520667991.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:46:31.459Z,1520667991.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-03-10T07:46:31.460Z,1520667991.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:46:31.853Z,1520667991.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2018-03-10T07:46:31.854Z,1520667991.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:46:32.260Z,1520667992.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2018-03-10T07:46:32.261Z,1520667992.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:46:32.670Z,1520667992.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2018-03-10T07:46:32.687Z,1520667992.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:46:33.049Z,1520667993.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2018-03-10T07:46:33.050Z,1520667993.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:46:33.456Z,1520667993.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 20.0 s old, using for 20.0 s.
2018-03-10T07:46:33.457Z,1520667993.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:46:33.887Z,1520667993.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:46:34.287Z,1520667994.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:46:34.659Z,1520667994.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:46:35.053Z,1520667995.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:46:35.461Z,1520667995.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:46:35.882Z,1520667995.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:46:36.251Z,1520667996.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:46:36.648Z,1520667996.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:46:37.073Z,1520667997.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:46:37.488Z,1520667997.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:46:37.859Z,1520667997.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:46:38.247Z,1520667998.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:46:38.665Z,1520667998.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:46:39.051Z,1520667999.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:46:39.448Z,1520667999.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:46:39.913Z,1520667999.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:46:40.268Z,1520668000.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:46:40.667Z,1520668000.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:46:41.046Z,1520668001.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:46:41.449Z,1520668001.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:46:41.863Z,1520668001.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:46:42.248Z,1520668002.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:46:42.646Z,1520668002.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:46:43.065Z,1520668003.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:46:43.466Z,1520668003.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:46:43.877Z,1520668003.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:46:44.246Z,1520668004.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:46:44.668Z,1520668004.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:46:45.068Z,1520668005.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:46:45.446Z,1520668005.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:46:45.867Z,1520668005.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:46:46.268Z,1520668006.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:46:46.669Z,1520668006.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:46:47.066Z,1520668007.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:46:47.476Z,1520668007.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:46:47.848Z,1520668007.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:46:48.277Z,1520668008.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:46:48.650Z,1520668008.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:46:49.050Z,1520668009.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:46:49.450Z,1520668009.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:46:49.876Z,1520668009.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:46:50.250Z,1520668010.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:46:50.653Z,1520668010.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:46:51.049Z,1520668011.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:46:51.471Z,1520668011.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:46:51.853Z,1520668011.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:46:52.250Z,1520668012.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:46:52.650Z,1520668012.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:46:53.071Z,1520668013.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:46:53.449Z,1520668013.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:46:53.848Z,1520668013.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:46:54.246Z,1520668014.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:46:54.672Z,1520668014.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:46:55.052Z,1520668015.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:46:55.451Z,1520668015.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:46:55.851Z,1520668015.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:46:56.268Z,1520668016.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:46:56.648Z,1520668016.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:46:57.046Z,1520668017.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:46:57.446Z,1520668017.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:46:57.874Z,1520668017.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:46:58.278Z,1520668018.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:46:58.684Z,1520668018.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:47:01.760Z,1520668021.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:47:01.949Z,1520668021.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:47:02.351Z,1520668022.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:47:02.748Z,1520668022.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:47:03.161Z,1520668023.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:47:03.536Z,1520668023.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:47:03.945Z,1520668023.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:47:04.332Z,1520668024.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:47:04.744Z,1520668024.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:47:05.148Z,1520668025.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:47:05.551Z,1520668025.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:47:05.946Z,1520668025.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:47:06.345Z,1520668026.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:47:06.735Z,1520668026.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:47:07.137Z,1520668027.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:47:07.537Z,1520668027.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:47:07.947Z,1520668027.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:47:08.347Z,1520668028.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:47:08.749Z,1520668028.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:47:09.138Z,1520668029.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:47:09.546Z,1520668029.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:47:09.961Z,1520668029.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:47:10.338Z,1520668030.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:47:10.740Z,1520668030.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:47:11.148Z,1520668031.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:47:11.545Z,1520668031.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:47:11.946Z,1520668031.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:47:12.341Z,1520668032.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:47:12.737Z,1520668032.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:47:13.138Z,1520668033.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:47:13.538Z,1520668033.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:47:13.954Z,1520668033.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:47:14.369Z,1520668034.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:47:14.753Z,1520668034.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:47:15.137Z,1520668035.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:47:15.540Z,1520668035.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:47:15.941Z,1520668035.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:47:16.339Z,1520668036.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:47:16.740Z,1520668036.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:47:17.148Z,1520668037.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:47:17.554Z,1520668037.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:47:17.946Z,1520668037.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:47:18.339Z,1520668038.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:47:18.748Z,1520668038.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:47:19.138Z,1520668039.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:47:19.541Z,1520668039.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:47:19.947Z,1520668039.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:47:20.357Z,1520668040.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:47:20.754Z,1520668040.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:47:21.152Z,1520668041.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:47:21.541Z,1520668041.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:47:21.926Z,1520668041.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:47:22.326Z,1520668042.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:47:22.725Z,1520668042.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:47:23.150Z,1520668043.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:47:23.550Z,1520668043.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:47:23.949Z,1520668043.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:47:24.326Z,1520668044.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:47:24.752Z,1520668044.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:47:25.129Z,1520668045.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:47:25.525Z,1520668045.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:47:25.950Z,1520668045.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:47:26.358Z,1520668046.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:47:26.764Z,1520668046.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:47:27.133Z,1520668047.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:47:27.533Z,1520668047.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:47:27.937Z,1520668047.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:47:28.337Z,1520668048.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:47:28.737Z,1520668048.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:47:29.161Z,1520668049.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:47:29.557Z,1520668049.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:47:29.959Z,1520668049.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:47:30.330Z,1520668050.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:47:30.758Z,1520668050.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:47:31.137Z,1520668051.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:47:31.530Z,1520668051.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:47:31.970Z,1520668051.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:47:32.377Z,1520668052.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:47:32.739Z,1520668052.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:47:33.133Z,1520668053.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:47:33.537Z,1520668053.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:47:33.934Z,1520668053.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:47:34.334Z,1520668054.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:47:34.733Z,1520668054.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:47:35.139Z,1520668055.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:47:35.561Z,1520668055.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:47:35.939Z,1520668055.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:47:36.334Z,1520668056.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:47:36.737Z,1520668056.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:47:37.135Z,1520668057.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:47:37.535Z,1520668057.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:47:37.935Z,1520668057.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:47:38.338Z,1520668058.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:47:38.740Z,1520668058.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:47:39.134Z,1520668059.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:47:39.534Z,1520668059.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:47:39.934Z,1520668059.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:47:40.334Z,1520668060.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:47:40.734Z,1520668060.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:47:41.161Z,1520668061.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:47:41.561Z,1520668061.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:47:41.960Z,1520668061.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:47:42.333Z,1520668062.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:47:42.741Z,1520668062.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:47:43.138Z,1520668063.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:47:43.548Z,1520668063.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:47:43.971Z,1520668063.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:47:44.342Z,1520668064.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:47:44.754Z,1520668064.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:47:45.139Z,1520668065.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:47:45.539Z,1520668065.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:47:45.932Z,1520668065.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:47:46.343Z,1520668066.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:47:46.743Z,1520668066.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:47:47.188Z,1520668067.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:47:47.560Z,1520668067.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:47:47.954Z,1520668067.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:47:48.351Z,1520668068.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:47:48.744Z,1520668068.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:47:49.134Z,1520668069.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:47:49.532Z,1520668069.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:47:49.935Z,1520668069.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:47:50.368Z,1520668070.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:47:50.780Z,1520668070.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:47:51.149Z,1520668071.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:47:51.535Z,1520668071.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:47:51.933Z,1520668071.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:47:52.345Z,1520668072.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:47:52.737Z,1520668072.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:47:53.139Z,1520668073.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:47:53.539Z,1520668073.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:47:53.939Z,1520668073.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:47:54.333Z,1520668074.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:47:54.741Z,1520668074.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:47:55.153Z,1520668075.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:47:55.548Z,1520668075.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:47:55.946Z,1520668075.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:47:56.345Z,1520668076.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:47:56.752Z,1520668076.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:47:57.136Z,1520668077.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:47:57.537Z,1520668077.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:47:57.936Z,1520668077.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:48:01.053Z,1520668081.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:48:01.209Z,1520668081.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:48:01.584Z,1520668081.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:48:01.956Z,1520668081.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:48:02.384Z,1520668082.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:48:02.753Z,1520668082.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:48:03.157Z,1520668083.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:48:03.552Z,1520668083.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:48:03.961Z,1520668083.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:48:04.354Z,1520668084.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:48:04.755Z,1520668084.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:48:05.148Z,1520668085.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:48:05.552Z,1520668085.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:48:05.956Z,1520668085.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:48:06.359Z,1520668086.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:48:06.788Z,1520668086.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:48:07.161Z,1520668087.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:48:07.562Z,1520668087.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:48:07.969Z,1520668087.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:48:08.353Z,1520668088.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:48:08.761Z,1520668088.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:48:09.150Z,1520668089.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:48:09.549Z,1520668089.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:48:09.959Z,1520668089.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:48:10.362Z,1520668090.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:48:10.758Z,1520668090.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:48:11.153Z,1520668091.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:48:11.561Z,1520668091.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:48:11.957Z,1520668091.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:48:12.348Z,1520668092.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:48:12.753Z,1520668092.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:48:13.158Z,1520668093.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:48:13.569Z,1520668093.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:48:13.994Z,1520668093.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:48:14.356Z,1520668094.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:48:14.752Z,1520668094.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:48:15.161Z,1520668095.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:48:15.554Z,1520668095.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:48:15.973Z,1520668095.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:48:16.377Z,1520668096.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:48:16.763Z,1520668096.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:48:17.161Z,1520668097.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:48:17.554Z,1520668097.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:48:17.964Z,1520668097.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:48:18.361Z,1520668098.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:48:18.754Z,1520668098.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:48:19.169Z,1520668099.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:48:19.564Z,1520668099.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:48:19.969Z,1520668099.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:48:20.365Z,1520668100.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:48:20.744Z,1520668100.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:48:21.163Z,1520668101.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:48:21.549Z,1520668101.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:48:21.954Z,1520668101.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:48:22.355Z,1520668102.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:48:22.750Z,1520668102.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:48:23.148Z,1520668103.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:48:23.568Z,1520668103.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:48:23.940Z,1520668103.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:48:24.344Z,1520668104.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:48:24.773Z,1520668104.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:48:25.161Z,1520668105.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:48:25.573Z,1520668105.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:48:25.967Z,1520668105.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:48:26.382Z,1520668106.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:48:26.774Z,1520668106.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:48:27.153Z,1520668107.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:48:27.549Z,1520668107.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:48:27.974Z,1520668107.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:48:28.373Z,1520668108.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:48:28.776Z,1520668108.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:48:29.146Z,1520668109.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:48:29.555Z,1520668109.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:48:29.978Z,1520668109.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:48:30.357Z,1520668110.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:48:30.742Z,1520668110.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:48:31.150Z,1520668111.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:48:31.561Z,1520668111.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:48:31.953Z,1520668111.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:48:32.351Z,1520668112.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:48:32.745Z,1520668112.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:48:33.157Z,1520668113.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:48:33.552Z,1520668113.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:48:33.954Z,1520668113.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:48:34.359Z,1520668114.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:48:34.755Z,1520668114.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:48:35.144Z,1520668115.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:48:35.546Z,1520668115.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:48:35.948Z,1520668115.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:48:36.351Z,1520668116.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:48:36.748Z,1520668116.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:48:37.153Z,1520668117.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:48:37.559Z,1520668117.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:48:37.955Z,1520668117.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:48:38.353Z,1520668118.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:48:38.749Z,1520668118.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:48:39.160Z,1520668119.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:48:39.588Z,1520668119.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:48:39.962Z,1520668119.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:48:40.359Z,1520668120.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:48:40.763Z,1520668120.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:48:41.161Z,1520668121.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:48:41.551Z,1520668121.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:48:41.949Z,1520668121.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:48:42.350Z,1520668122.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:48:42.751Z,1520668122.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:48:43.158Z,1520668123.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:48:43.561Z,1520668123.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:48:43.969Z,1520668123.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:48:44.352Z,1520668124.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:48:44.754Z,1520668124.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:48:45.150Z,1520668125.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:48:45.561Z,1520668125.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:48:45.962Z,1520668125.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:48:46.355Z,1520668126.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:48:46.758Z,1520668126.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:48:47.150Z,1520668127.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:48:47.553Z,1520668127.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:48:47.949Z,1520668127.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:48:48.349Z,1520668128.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:48:48.757Z,1520668128.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:48:49.160Z,1520668129.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:48:49.568Z,1520668129.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:48:49.969Z,1520668129.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:48:50.357Z,1520668130.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:48:50.751Z,1520668130.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:48:51.154Z,1520668131.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:48:51.556Z,1520668131.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:48:52.009Z,1520668132.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:48:52.392Z,1520668132.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:48:52.761Z,1520668132.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:48:53.149Z,1520668133.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:48:53.553Z,1520668133.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:48:53.952Z,1520668133.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:48:54.353Z,1520668134.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:48:54.750Z,1520668134.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:48:55.163Z,1520668135.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:48:55.562Z,1520668135.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:48:55.969Z,1520668135.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:48:56.357Z,1520668136.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:48:56.750Z,1520668136.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:48:57.153Z,1520668137.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:48:57.560Z,1520668137.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:48:57.564Z,1520668137.564 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-03-10T07:43:57.4Z
2018-03-10T07:48:57.564Z,1520668137.564 [Default:CheckIn:Read_GPS] Stopped
2018-03-10T07:48:57.564Z,1520668137.564 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-03-10T07:48:57.963Z,1520668137.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:49:01.207Z,1520668141.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:49:01.361Z,1520668141.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:49:01.635Z,1520668141.635 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20180310T051512/Courier0060.lzma
2018-03-10T07:49:01.686Z,1520668141.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:49:02.079Z,1520668142.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:49:02.434Z,1520668142.434 [DataOverHttps](INFO): Moved sent file to Logs/20180310T051512/Courier0060.lzma.bak
2018-03-10T07:49:02.434Z,1520668142.434 [DataOverHttps](INFO): SBD MOMSN=8002850
2018-03-10T07:49:02.490Z,1520668142.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:49:03.168Z,1520668143.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:49:03.358Z,1520668143.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:49:03.716Z,1520668143.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:49:06.786Z,1520668146.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:49:06.933Z,1520668146.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:49:07.326Z,1520668147.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:49:07.728Z,1520668147.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:49:08.123Z,1520668148.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:49:08.511Z,1520668148.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:49:08.924Z,1520668148.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:49:12.072Z,1520668152.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:49:12.142Z,1520668152.142 [DataOverHttps](INFO): Sending 171 bytes from file Logs/20180310T051512/Express0061.lzma
2018-03-10T07:49:12.201Z,1520668152.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:49:12.575Z,1520668152.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:49:12.925Z,1520668152.925 [DataOverHttps](INFO): Moved sent file to Logs/20180310T051512/Express0061.lzma.bak
2018-03-10T07:49:12.925Z,1520668152.925 [DataOverHttps](INFO): SBD MOMSN=8002852
2018-03-10T07:49:13.005Z,1520668153.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:49:13.665Z,1520668153.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:49:13.668Z,1520668153.668 [Default:CheckIn:Read_Iridium] Stopped
2018-03-10T07:49:13.668Z,1520668153.668 [Default:CheckIn:C.Wait] Running Loop=1
2018-03-10T07:49:13.668Z,1520668153.668 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-03-10T07:49:13.797Z,1520668153.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:49:14.185Z,1520668154.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:49:17.308Z,1520668157.308 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:49:17.309Z,1520668157.309 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 51
2018-03-10T07:49:17.309Z,1520668157.309 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-03-10T07:49:17.310Z,1520668157.310 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:49:17.310Z,1520668157.310 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 51
2018-03-10T07:49:17.310Z,1520668157.310 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-03-10T07:49:17.312Z,1520668157.312 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:49:17.312Z,1520668157.312 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 51
2018-03-10T07:49:17.312Z,1520668157.312 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-10T07:49:17.324Z,1520668157.324 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-03-10T07:49:17.324Z,1520668157.324 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-03-10T07:49:17.324Z,1520668157.324 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-10T07:49:17.480Z,1520668157.480 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-03-10T07:49:17.480Z,1520668157.480 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 51
2018-03-10T07:49:17.480Z,1520668157.480 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-03-10T07:49:17.480Z,1520668157.480 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 51
2018-03-10T07:49:17.481Z,1520668157.481 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-10T07:49:17.481Z,1520668157.481 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 51
2018-03-10T07:49:17.800Z,1520668157.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-03-10T07:49:17.800Z,1520668157.800 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-03-10T07:49:17.801Z,1520668157.801 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-03-10T07:49:17.801Z,1520668157.801 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-03-10T07:49:17.802Z,1520668157.802 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-03-10T07:49:17.802Z,1520668157.802 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-03-10T07:49:17.802Z,1520668157.802 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-10T07:49:17.803Z,1520668157.803 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-10T07:49:17.803Z,1520668157.803 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-10T07:49:18.204Z,1520668158.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 0.9 s old, using for 20.0 s.
2018-03-10T07:49:18.205Z,1520668158.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:49:18.609Z,1520668158.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.3 s old, using for 20.0 s.
2018-03-10T07:49:18.609Z,1520668158.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:49:18.000Z,1520668159.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.7 s old, using for 20.0 s.
2018-03-10T07:49:19.001Z,1520668159.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:49:19.401Z,1520668159.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.1 s old, using for 20.0 s.
2018-03-10T07:49:19.402Z,1520668159.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:49:19.806Z,1520668159.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.5 s old, using for 20.0 s.
2018-03-10T07:49:19.808Z,1520668159.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:49:20.198Z,1520668160.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.9 s old, using for 20.0 s.
2018-03-10T07:49:20.199Z,1520668160.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:49:20.604Z,1520668160.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.3 s old, using for 20.0 s.
2018-03-10T07:49:20.605Z,1520668160.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:49:20.991Z,1520668160.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.7 s old, using for 20.0 s.
2018-03-10T07:49:20.992Z,1520668160.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:49:21.373Z,1520668161.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.1 s old, using for 20.0 s.
2018-03-10T07:49:21.374Z,1520668161.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:49:21.801Z,1520668161.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.5 s old, using for 20.0 s.
2018-03-10T07:49:21.801Z,1520668161.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:49:22.208Z,1520668162.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.9 s old, using for 20.0 s.
2018-03-10T07:49:22.209Z,1520668162.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:49:22.604Z,1520668162.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.3 s old, using for 20.0 s.
2018-03-10T07:49:22.605Z,1520668162.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:49:23.003Z,1520668163.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.7 s old, using for 20.0 s.
2018-03-10T07:49:23.004Z,1520668163.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:49:23.379Z,1520668163.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.1 s old, using for 20.0 s.
2018-03-10T07:49:23.380Z,1520668163.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:49:23.805Z,1520668163.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.5 s old, using for 20.0 s.
2018-03-10T07:49:23.806Z,1520668163.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:49:24.207Z,1520668164.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.9 s old, using for 20.0 s.
2018-03-10T07:49:24.208Z,1520668164.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:49:24.604Z,1520668164.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.3 s old, using for 20.0 s.
2018-03-10T07:49:24.605Z,1520668164.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:49:24.981Z,1520668164.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.7 s old, using for 20.0 s.
2018-03-10T07:49:24.982Z,1520668164.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:49:25.384Z,1520668165.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.1 s old, using for 20.0 s.
2018-03-10T07:49:25.385Z,1520668165.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:49:25.794Z,1520668165.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.5 s old, using for 20.0 s.
2018-03-10T07:49:25.811Z,1520668165.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:49:26.196Z,1520668166.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.9 s old, using for 20.0 s.
2018-03-10T07:49:26.197Z,1520668166.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:49:26.590Z,1520668166.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.3 s old, using for 20.0 s.
2018-03-10T07:49:26.591Z,1520668166.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:49:26.981Z,1520668166.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.7 s old, using for 20.0 s.
2018-03-10T07:49:26.982Z,1520668166.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:49:27.380Z,1520668167.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.1 s old, using for 20.0 s.
2018-03-10T07:49:27.380Z,1520668167.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:49:27.796Z,1520668167.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.5 s old, using for 20.0 s.
2018-03-10T07:49:27.797Z,1520668167.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:49:28.204Z,1520668168.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.9 s old, using for 20.0 s.
2018-03-10T07:49:28.205Z,1520668168.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:49:28.608Z,1520668168.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.3 s old, using for 20.0 s.
2018-03-10T07:49:28.609Z,1520668168.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:49:28.985Z,1520668168.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.7 s old, using for 20.0 s.
2018-03-10T07:49:28.986Z,1520668168.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:49:29.386Z,1520668169.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.1 s old, using for 20.0 s.
2018-03-10T07:49:29.388Z,1520668169.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:49:29.748Z,1520668169.748 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-03-10T07:49:29.748Z,1520668169.748 [NAL9602] Data Fault, FailCount= 5
2018-03-10T07:49:29.748Z,1520668169.748 [NAL9602](ERROR): Data Fault
2018-03-10T07:49:29.801Z,1520668169.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.5 s old, using for 20.0 s.
2018-03-10T07:49:29.801Z,1520668169.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:49:29.823Z,1520668169.823 [CBIT](ERROR): Data Fault in component: NAL9602
2018-03-10T07:49:29.823Z,1520668169.823 [CBIT](CRITICAL): Data Fault in component: NAL9602
2018-03-10T07:49:30.140Z,1520668170.140 [NAL9602](INFO): Powering down
2018-03-10T07:49:30.204Z,1520668170.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.9 s old, using for 20.0 s.
2018-03-10T07:49:30.205Z,1520668170.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:49:30.216Z,1520668170.216 [CBIT](INFO): Critical error at 20180310T074929
2018-03-10T07:49:30.585Z,1520668170.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.3 s old, using for 20.0 s.
2018-03-10T07:49:30.585Z,1520668170.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:49:30.986Z,1520668170.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.7 s old, using for 20.0 s.
2018-03-10T07:49:30.987Z,1520668170.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:49:31.410Z,1520668171.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.1 s old, using for 20.0 s.
2018-03-10T07:49:31.411Z,1520668171.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:49:31.792Z,1520668171.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.5 s old, using for 20.0 s.
2018-03-10T07:49:31.793Z,1520668171.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:49:32.185Z,1520668172.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.9 s old, using for 20.0 s.
2018-03-10T07:49:32.186Z,1520668172.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:49:32.584Z,1520668172.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.3 s old, using for 20.0 s.
2018-03-10T07:49:32.585Z,1520668172.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:49:32.984Z,1520668172.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.7 s old, using for 20.0 s.
2018-03-10T07:49:32.984Z,1520668172.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:49:33.386Z,1520668173.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.1 s old, using for 20.0 s.
2018-03-10T07:49:33.387Z,1520668173.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:49:33.785Z,1520668173.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.5 s old, using for 20.0 s.
2018-03-10T07:49:33.786Z,1520668173.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:49:34.179Z,1520668174.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.9 s old, using for 20.0 s.
2018-03-10T07:49:34.180Z,1520668174.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:49:34.591Z,1520668174.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.3 s old, using for 20.0 s.
2018-03-10T07:49:34.592Z,1520668174.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:49:34.991Z,1520668174.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.7 s old, using for 20.0 s.
2018-03-10T07:49:34.992Z,1520668174.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:49:35.387Z,1520668175.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.1 s old, using for 20.0 s.
2018-03-10T07:49:35.388Z,1520668175.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:49:35.797Z,1520668175.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.5 s old, using for 20.0 s.
2018-03-10T07:49:35.798Z,1520668175.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:49:36.170Z,1520668176.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.9 s old, using for 20.0 s.
2018-03-10T07:49:36.171Z,1520668176.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:49:36.599Z,1520668176.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.3 s old, using for 20.0 s.
2018-03-10T07:49:36.600Z,1520668176.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:49:36.978Z,1520668176.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.7 s old, using for 20.0 s.
2018-03-10T07:49:37.000Z,1520668177.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:49:37.378Z,1520668177.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:49:37.795Z,1520668177.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:49:38.179Z,1520668178.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:49:38.572Z,1520668178.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:49:38.979Z,1520668178.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:49:39.382Z,1520668179.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:49:39.816Z,1520668179.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:49:40.180Z,1520668180.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:49:40.576Z,1520668180.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:49:40.976Z,1520668180.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:49:41.380Z,1520668181.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:49:41.776Z,1520668181.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:49:42.180Z,1520668182.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:49:42.576Z,1520668182.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:49:42.980Z,1520668182.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:49:43.380Z,1520668183.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:49:43.781Z,1520668183.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:49:44.186Z,1520668184.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:49:44.589Z,1520668184.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:49:44.991Z,1520668184.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:49:45.381Z,1520668185.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:49:45.793Z,1520668185.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:49:46.178Z,1520668186.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:49:46.640Z,1520668186.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:49:47.009Z,1520668187.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:49:47.407Z,1520668187.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:49:47.790Z,1520668187.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:49:48.192Z,1520668188.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:49:48.589Z,1520668188.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:49:49.005Z,1520668189.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:49:49.385Z,1520668189.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:49:49.797Z,1520668189.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:49:50.188Z,1520668190.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:49:50.595Z,1520668190.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:49:51.009Z,1520668191.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:49:51.389Z,1520668191.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:49:51.791Z,1520668191.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:49:52.192Z,1520668192.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:49:52.590Z,1520668192.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:49:52.992Z,1520668192.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:49:53.393Z,1520668193.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:49:53.797Z,1520668193.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:49:54.173Z,1520668194.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:49:54.577Z,1520668194.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:49:54.980Z,1520668194.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:49:55.380Z,1520668195.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:49:55.780Z,1520668195.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:49:56.185Z,1520668196.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:49:56.579Z,1520668196.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:49:56.986Z,1520668196.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:49:57.409Z,1520668197.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:49:57.782Z,1520668197.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:49:58.184Z,1520668198.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:49:58.579Z,1520668198.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:49:58.975Z,1520668198.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:49:59.383Z,1520668199.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:49:59.786Z,1520668199.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:50:00.179Z,1520668200.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:50:00.578Z,1520668200.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:50:00.979Z,1520668200.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:50:01.385Z,1520668201.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:50:01.784Z,1520668201.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:50:02.183Z,1520668202.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:50:02.589Z,1520668202.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:50:02.981Z,1520668202.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:50:03.380Z,1520668203.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:50:03.780Z,1520668203.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:50:04.183Z,1520668204.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:50:04.581Z,1520668204.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:50:04.984Z,1520668204.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:50:05.383Z,1520668205.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:50:05.781Z,1520668205.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:50:06.184Z,1520668206.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:50:06.584Z,1520668206.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:50:06.981Z,1520668206.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:50:07.380Z,1520668207.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:50:07.783Z,1520668207.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:50:08.178Z,1520668208.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:50:08.584Z,1520668208.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:50:08.979Z,1520668208.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:50:09.382Z,1520668209.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:50:09.808Z,1520668209.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:50:10.200Z,1520668210.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:50:10.592Z,1520668210.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:50:10.989Z,1520668210.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:50:11.372Z,1520668211.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:50:11.796Z,1520668211.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:50:12.189Z,1520668212.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:50:12.572Z,1520668212.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:50:12.983Z,1520668212.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:50:13.377Z,1520668213.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:50:13.780Z,1520668213.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:50:14.177Z,1520668214.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:50:14.579Z,1520668214.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:50:14.977Z,1520668214.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:50:15.383Z,1520668215.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:50:18.512Z,1520668218.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:50:18.641Z,1520668218.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:50:18.985Z,1520668218.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:50:19.380Z,1520668219.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:50:19.785Z,1520668219.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:50:20.180Z,1520668220.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:50:20.577Z,1520668220.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:50:20.981Z,1520668220.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:50:21.381Z,1520668221.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:50:21.778Z,1520668221.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:50:22.178Z,1520668222.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:50:22.586Z,1520668222.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:50:23.012Z,1520668223.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:50:23.373Z,1520668223.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:50:23.785Z,1520668223.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:50:24.177Z,1520668224.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:50:24.582Z,1520668224.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:50:24.980Z,1520668224.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:50:25.381Z,1520668225.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:50:25.775Z,1520668225.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:50:26.178Z,1520668226.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:50:26.581Z,1520668226.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:50:26.975Z,1520668226.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:50:27.389Z,1520668227.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:50:27.784Z,1520668227.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:50:28.183Z,1520668228.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:50:28.589Z,1520668228.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:50:28.979Z,1520668228.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:50:29.384Z,1520668229.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:50:29.793Z,1520668229.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:50:30.185Z,1520668230.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:50:30.577Z,1520668230.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:50:31.001Z,1520668231.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:50:31.375Z,1520668231.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:50:31.776Z,1520668231.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:50:32.177Z,1520668232.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:50:32.576Z,1520668232.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:50:32.972Z,1520668232.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:50:33.381Z,1520668233.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:50:33.776Z,1520668233.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:50:34.175Z,1520668234.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:50:34.573Z,1520668234.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:50:34.988Z,1520668234.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:50:35.393Z,1520668235.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:50:35.813Z,1520668235.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:50:36.169Z,1520668236.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:50:36.592Z,1520668236.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:50:36.996Z,1520668236.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:50:37.373Z,1520668237.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:50:37.772Z,1520668237.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:50:38.179Z,1520668238.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:50:38.580Z,1520668238.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:50:38.979Z,1520668238.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:50:39.379Z,1520668239.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:50:39.784Z,1520668239.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:50:40.180Z,1520668240.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:50:40.580Z,1520668240.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:50:40.980Z,1520668240.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:50:41.380Z,1520668241.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:50:41.779Z,1520668241.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:50:42.179Z,1520668242.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:50:42.580Z,1520668242.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:50:42.980Z,1520668242.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:50:43.425Z,1520668243.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:50:43.811Z,1520668243.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:50:44.178Z,1520668244.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:50:44.580Z,1520668244.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:50:44.978Z,1520668244.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:50:45.380Z,1520668245.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:50:45.780Z,1520668245.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:50:46.174Z,1520668246.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:50:46.578Z,1520668246.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:50:46.981Z,1520668246.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:50:47.380Z,1520668247.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:50:47.786Z,1520668247.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:50:48.185Z,1520668248.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:50:48.575Z,1520668248.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:50:48.987Z,1520668248.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:50:49.378Z,1520668249.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:50:49.782Z,1520668249.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:50:50.177Z,1520668250.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:50:50.577Z,1520668250.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:50:50.983Z,1520668250.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:50:51.382Z,1520668251.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:50:51.782Z,1520668251.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:50:52.182Z,1520668252.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:50:52.578Z,1520668252.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:50:52.981Z,1520668252.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:50:53.382Z,1520668253.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:50:53.782Z,1520668253.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:50:54.182Z,1520668254.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:50:54.594Z,1520668254.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:50:54.985Z,1520668254.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:50:55.389Z,1520668255.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:50:55.789Z,1520668255.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:50:56.186Z,1520668256.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:50:56.586Z,1520668256.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:50:56.987Z,1520668256.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:50:57.383Z,1520668257.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:50:57.785Z,1520668257.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:50:58.184Z,1520668258.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:50:58.587Z,1520668258.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:50:58.984Z,1520668258.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:50:59.385Z,1520668259.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:50:59.792Z,1520668259.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:51:00.209Z,1520668260.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:51:00.590Z,1520668260.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:51:00.990Z,1520668260.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:51:01.392Z,1520668261.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:51:01.783Z,1520668261.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:51:02.196Z,1520668262.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:51:02.595Z,1520668262.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:51:02.969Z,1520668262.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:51:03.385Z,1520668263.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:51:03.797Z,1520668263.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:51:04.195Z,1520668264.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:51:04.579Z,1520668264.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:51:05.001Z,1520668265.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:51:05.379Z,1520668265.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:51:05.777Z,1520668265.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:51:06.182Z,1520668266.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:51:06.581Z,1520668266.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:51:06.979Z,1520668266.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:51:07.377Z,1520668267.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:51:07.781Z,1520668267.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:51:08.187Z,1520668268.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:51:08.601Z,1520668268.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:51:08.984Z,1520668268.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:51:09.384Z,1520668269.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:51:09.785Z,1520668269.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:51:10.180Z,1520668270.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:51:10.581Z,1520668270.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:51:10.993Z,1520668270.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:51:11.384Z,1520668271.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:51:11.789Z,1520668271.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:51:12.181Z,1520668272.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:51:12.599Z,1520668272.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:51:12.985Z,1520668272.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:51:13.386Z,1520668273.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:51:13.787Z,1520668273.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:51:14.191Z,1520668274.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:51:14.586Z,1520668274.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:51:17.683Z,1520668277.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:51:17.814Z,1520668277.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:51:18.156Z,1520668278.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:51:18.551Z,1520668278.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:51:18.957Z,1520668278.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:51:19.360Z,1520668279.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:51:19.751Z,1520668279.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:51:20.151Z,1520668280.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:51:20.568Z,1520668280.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:51:20.960Z,1520668280.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:51:21.353Z,1520668281.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:51:21.753Z,1520668281.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:51:22.155Z,1520668282.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:51:22.557Z,1520668282.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:51:22.953Z,1520668282.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:51:23.357Z,1520668283.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:51:23.761Z,1520668283.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:51:24.160Z,1520668284.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:51:24.556Z,1520668284.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:51:24.957Z,1520668284.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:51:25.376Z,1520668285.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:51:25.767Z,1520668285.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:51:26.141Z,1520668286.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:51:26.543Z,1520668286.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:51:26.943Z,1520668286.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:51:27.357Z,1520668287.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:51:27.770Z,1520668287.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:51:28.169Z,1520668288.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:51:28.545Z,1520668288.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:51:28.970Z,1520668288.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:51:29.346Z,1520668289.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:51:29.772Z,1520668289.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:51:29.785Z,1520668289.785 [CBIT](INFO): Clearing failed state for component NAL9602
2018-03-10T07:51:29.785Z,1520668289.785 [NAL9602] No Fault, FailCount= 5
2018-03-10T07:51:30.120Z,1520668290.120 [NAL9602](INFO): Powering up NAL9602
2018-03-10T07:51:30.172Z,1520668290.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:51:30.576Z,1520668290.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:51:30.945Z,1520668290.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:51:31.351Z,1520668291.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:51:31.773Z,1520668291.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:51:32.145Z,1520668292.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:51:32.551Z,1520668292.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:51:32.958Z,1520668292.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:51:33.361Z,1520668293.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:51:33.749Z,1520668293.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:51:34.153Z,1520668294.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:51:34.555Z,1520668294.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:51:34.955Z,1520668294.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:51:35.361Z,1520668295.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:51:35.755Z,1520668295.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:51:36.156Z,1520668296.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:51:36.561Z,1520668296.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:51:36.957Z,1520668296.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:51:37.354Z,1520668297.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:51:37.763Z,1520668297.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:51:38.157Z,1520668298.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:51:38.556Z,1520668298.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:51:38.965Z,1520668298.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:51:39.355Z,1520668299.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:51:39.752Z,1520668299.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:51:40.165Z,1520668300.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:51:40.556Z,1520668300.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:51:40.968Z,1520668300.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:51:41.316Z,1520668301.316 [NAL9602](INFO): NAL9602 initialized
2018-03-10T07:51:41.361Z,1520668301.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:51:41.760Z,1520668301.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:51:42.163Z,1520668302.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:51:42.569Z,1520668302.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:51:42.966Z,1520668302.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:51:43.354Z,1520668303.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:51:43.765Z,1520668303.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:51:44.157Z,1520668304.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:51:44.555Z,1520668304.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:51:44.966Z,1520668304.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:51:45.369Z,1520668305.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:51:45.781Z,1520668305.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:51:46.165Z,1520668306.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:51:46.556Z,1520668306.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:51:46.960Z,1520668306.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:51:47.357Z,1520668307.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:51:47.772Z,1520668307.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:51:48.201Z,1520668308.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:51:48.575Z,1520668308.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:51:48.968Z,1520668308.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:51:49.377Z,1520668309.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:51:49.761Z,1520668309.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:51:50.185Z,1520668310.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:51:50.591Z,1520668310.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:51:50.954Z,1520668310.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:51:51.353Z,1520668311.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:51:51.794Z,1520668311.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:51:52.169Z,1520668312.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:51:52.563Z,1520668312.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:51:52.963Z,1520668312.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:51:53.366Z,1520668313.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:51:53.765Z,1520668313.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:51:54.165Z,1520668314.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:51:54.563Z,1520668314.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:51:54.953Z,1520668314.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:51:55.362Z,1520668315.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:51:55.766Z,1520668315.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:51:56.165Z,1520668316.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:51:56.573Z,1520668316.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:51:56.951Z,1520668316.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:51:57.353Z,1520668317.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:51:57.773Z,1520668317.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:51:58.181Z,1520668318.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:51:58.562Z,1520668318.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:51:58.953Z,1520668318.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:51:59.358Z,1520668319.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:51:59.771Z,1520668319.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:52:00.176Z,1520668320.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:52:00.567Z,1520668320.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:52:00.963Z,1520668320.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:52:01.352Z,1520668321.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:52:01.761Z,1520668321.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:52:02.167Z,1520668322.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:52:02.572Z,1520668322.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:52:02.981Z,1520668322.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:52:03.376Z,1520668323.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:52:03.772Z,1520668323.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:52:04.172Z,1520668324.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:52:04.572Z,1520668324.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:52:04.945Z,1520668324.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:52:05.368Z,1520668325.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:52:05.770Z,1520668325.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:52:06.172Z,1520668326.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:52:06.575Z,1520668326.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:52:06.950Z,1520668326.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:52:07.351Z,1520668327.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:52:07.775Z,1520668327.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:52:08.181Z,1520668328.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:52:08.580Z,1520668328.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:52:08.954Z,1520668328.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:52:09.357Z,1520668329.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:52:09.777Z,1520668329.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:52:10.158Z,1520668330.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:52:10.589Z,1520668330.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:52:10.966Z,1520668330.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:52:11.353Z,1520668331.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:52:11.761Z,1520668331.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:52:12.166Z,1520668332.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:52:12.583Z,1520668332.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:52:12.961Z,1520668332.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:52:13.355Z,1520668333.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:52:13.765Z,1520668333.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:52:14.162Z,1520668334.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:52:14.562Z,1520668334.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:52:14.956Z,1520668334.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:52:18.068Z,1520668338.068 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:52:18.068Z,1520668338.068 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 52
2018-03-10T07:52:18.068Z,1520668338.068 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-03-10T07:52:18.070Z,1520668338.070 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:52:18.070Z,1520668338.070 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 52
2018-03-10T07:52:18.070Z,1520668338.070 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-03-10T07:52:18.088Z,1520668338.088 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:52:18.088Z,1520668338.088 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 52
2018-03-10T07:52:18.088Z,1520668338.088 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-10T07:52:18.108Z,1520668338.108 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-03-10T07:52:18.108Z,1520668338.108 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-03-10T07:52:18.108Z,1520668338.108 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-10T07:52:18.272Z,1520668338.272 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-03-10T07:52:18.272Z,1520668338.272 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 52
2018-03-10T07:52:18.273Z,1520668338.273 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-03-10T07:52:18.273Z,1520668338.273 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 52
2018-03-10T07:52:18.273Z,1520668338.273 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-10T07:52:18.273Z,1520668338.273 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 52
2018-03-10T07:52:18.573Z,1520668338.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-03-10T07:52:18.574Z,1520668338.574 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-03-10T07:52:18.574Z,1520668338.574 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-03-10T07:52:18.574Z,1520668338.574 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-03-10T07:52:18.575Z,1520668338.575 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-03-10T07:52:18.575Z,1520668338.575 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-03-10T07:52:18.575Z,1520668338.575 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-10T07:52:18.576Z,1520668338.576 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-10T07:52:18.576Z,1520668338.576 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-10T07:52:18.984Z,1520668338.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 0.9 s old, using for 20.0 s.
2018-03-10T07:52:18.985Z,1520668338.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:52:19.372Z,1520668339.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.3 s old, using for 20.0 s.
2018-03-10T07:52:19.373Z,1520668339.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:52:19.762Z,1520668339.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.7 s old, using for 20.0 s.
2018-03-10T07:52:19.763Z,1520668339.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:52:20.168Z,1520668340.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.1 s old, using for 20.0 s.
2018-03-10T07:52:20.169Z,1520668340.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:52:20.565Z,1520668340.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.5 s old, using for 20.0 s.
2018-03-10T07:52:20.566Z,1520668340.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:52:20.973Z,1520668340.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.9 s old, using for 20.0 s.
2018-03-10T07:52:20.974Z,1520668340.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:52:21.378Z,1520668341.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.3 s old, using for 20.0 s.
2018-03-10T07:52:21.379Z,1520668341.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:52:21.780Z,1520668341.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.7 s old, using for 20.0 s.
2018-03-10T07:52:21.781Z,1520668341.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:52:22.167Z,1520668342.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.1 s old, using for 20.0 s.
2018-03-10T07:52:22.168Z,1520668342.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:52:22.655Z,1520668342.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.6 s old, using for 20.0 s.
2018-03-10T07:52:22.657Z,1520668342.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:52:22.975Z,1520668342.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.9 s old, using for 20.0 s.
2018-03-10T07:52:22.976Z,1520668342.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:52:23.381Z,1520668343.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.3 s old, using for 20.0 s.
2018-03-10T07:52:23.382Z,1520668343.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:52:23.782Z,1520668343.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.7 s old, using for 20.0 s.
2018-03-10T07:52:23.783Z,1520668343.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:52:24.182Z,1520668344.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.1 s old, using for 20.0 s.
2018-03-10T07:52:24.187Z,1520668344.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:52:24.577Z,1520668344.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.5 s old, using for 20.0 s.
2018-03-10T07:52:24.578Z,1520668344.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:52:24.972Z,1520668344.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.9 s old, using for 20.0 s.
2018-03-10T07:52:24.973Z,1520668344.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:52:25.376Z,1520668345.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.3 s old, using for 20.0 s.
2018-03-10T07:52:25.377Z,1520668345.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:52:25.785Z,1520668345.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.7 s old, using for 20.0 s.
2018-03-10T07:52:25.786Z,1520668345.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:52:26.186Z,1520668346.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.1 s old, using for 20.0 s.
2018-03-10T07:52:26.187Z,1520668346.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:52:26.589Z,1520668346.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.5 s old, using for 20.0 s.
2018-03-10T07:52:26.590Z,1520668346.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:52:26.979Z,1520668346.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.9 s old, using for 20.0 s.
2018-03-10T07:52:26.980Z,1520668346.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:52:27.385Z,1520668347.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.3 s old, using for 20.0 s.
2018-03-10T07:52:27.386Z,1520668347.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:52:27.796Z,1520668347.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.7 s old, using for 20.0 s.
2018-03-10T07:52:27.797Z,1520668347.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:52:28.185Z,1520668348.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.1 s old, using for 20.0 s.
2018-03-10T07:52:28.186Z,1520668348.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:52:28.589Z,1520668348.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.5 s old, using for 20.0 s.
2018-03-10T07:52:28.590Z,1520668348.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:52:28.973Z,1520668348.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.9 s old, using for 20.0 s.
2018-03-10T07:52:28.974Z,1520668348.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:52:29.360Z,1520668349.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.3 s old, using for 20.0 s.
2018-03-10T07:52:29.361Z,1520668349.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:52:29.792Z,1520668349.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.7 s old, using for 20.0 s.
2018-03-10T07:52:29.793Z,1520668349.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:52:30.189Z,1520668350.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.1 s old, using for 20.0 s.
2018-03-10T07:52:30.190Z,1520668350.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:52:30.584Z,1520668350.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.5 s old, using for 20.0 s.
2018-03-10T07:52:30.585Z,1520668350.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:52:30.980Z,1520668350.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.9 s old, using for 20.0 s.
2018-03-10T07:52:30.981Z,1520668350.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:52:31.376Z,1520668351.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.3 s old, using for 20.0 s.
2018-03-10T07:52:31.377Z,1520668351.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:52:31.788Z,1520668351.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.7 s old, using for 20.0 s.
2018-03-10T07:52:31.789Z,1520668351.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:52:32.187Z,1520668352.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.1 s old, using for 20.0 s.
2018-03-10T07:52:32.188Z,1520668352.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:52:32.588Z,1520668352.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.5 s old, using for 20.0 s.
2018-03-10T07:52:32.589Z,1520668352.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:52:32.979Z,1520668352.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.9 s old, using for 20.0 s.
2018-03-10T07:52:32.980Z,1520668352.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:52:33.369Z,1520668353.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.3 s old, using for 20.0 s.
2018-03-10T07:52:33.370Z,1520668353.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:52:33.788Z,1520668353.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.7 s old, using for 20.0 s.
2018-03-10T07:52:33.789Z,1520668353.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:52:34.189Z,1520668354.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.1 s old, using for 20.0 s.
2018-03-10T07:52:34.190Z,1520668354.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:52:34.585Z,1520668354.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.5 s old, using for 20.0 s.
2018-03-10T07:52:34.586Z,1520668354.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:52:34.980Z,1520668354.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.9 s old, using for 20.0 s.
2018-03-10T07:52:34.981Z,1520668354.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:52:35.384Z,1520668355.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.3 s old, using for 20.0 s.
2018-03-10T07:52:35.385Z,1520668355.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:52:35.781Z,1520668355.781 [BPC1](ERROR): Bank B: No match for stick 7 serial number:1717 in the onboard configuration file.
2018-03-10T07:52:35.781Z,1520668355.781 [BPC1](ERROR): Failed to parse Bank B battery data
2018-03-10T07:52:35.781Z,1520668355.781 [BPC1] Data Fault, FailCount= 1
2018-03-10T07:52:35.781Z,1520668355.781 [BPC1](ERROR): Data Fault
2018-03-10T07:52:35.789Z,1520668355.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.7 s old, using for 20.0 s.
2018-03-10T07:52:35.790Z,1520668355.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:52:35.803Z,1520668355.803 [CBIT](ERROR): Data Fault in component: BPC1
2018-03-10T07:52:36.192Z,1520668356.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.1 s old, using for 20.0 s.
2018-03-10T07:52:36.193Z,1520668356.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:52:36.588Z,1520668356.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.5 s old, using for 20.0 s.
2018-03-10T07:52:36.589Z,1520668356.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:52:36.984Z,1520668356.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.9 s old, using for 20.0 s.
2018-03-10T07:52:36.985Z,1520668356.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:52:36.998Z,1520668356.998 [CBIT](INFO): Clearing failed state for component BPC1
2018-03-10T07:52:36.998Z,1520668356.998 [BPC1] No Fault, FailCount= 1
2018-03-10T07:52:37.428Z,1520668357.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.4 s old, using for 20.0 s.
2018-03-10T07:52:37.429Z,1520668357.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:52:37.784Z,1520668357.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.7 s old, using for 20.0 s.
2018-03-10T07:52:37.785Z,1520668357.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:52:38.162Z,1520668358.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:52:38.582Z,1520668358.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:52:38.979Z,1520668358.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:52:39.357Z,1520668359.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:52:39.782Z,1520668359.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:52:40.184Z,1520668360.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:52:40.589Z,1520668360.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:52:40.979Z,1520668360.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:52:41.384Z,1520668361.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:52:41.780Z,1520668361.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:52:42.186Z,1520668362.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:52:42.584Z,1520668362.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:52:42.997Z,1520668362.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:52:43.380Z,1520668363.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:52:43.786Z,1520668363.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:52:44.184Z,1520668364.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:52:44.582Z,1520668364.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:52:44.961Z,1520668364.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:52:45.357Z,1520668365.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:52:45.782Z,1520668365.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:52:46.188Z,1520668366.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:52:46.587Z,1520668366.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:52:46.961Z,1520668366.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:52:47.359Z,1520668367.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:52:47.762Z,1520668367.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:52:48.185Z,1520668368.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:52:48.585Z,1520668368.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:52:48.965Z,1520668368.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:52:49.364Z,1520668369.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:52:49.790Z,1520668369.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:52:50.189Z,1520668370.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:52:50.590Z,1520668370.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:52:50.961Z,1520668370.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:52:51.365Z,1520668371.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:52:51.790Z,1520668371.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:52:52.188Z,1520668372.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:52:52.590Z,1520668372.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:52:52.989Z,1520668372.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:52:53.360Z,1520668373.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:52:53.793Z,1520668373.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:52:54.193Z,1520668374.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:52:54.593Z,1520668374.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:52:54.968Z,1520668374.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:52:55.395Z,1520668375.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:52:55.772Z,1520668375.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:52:56.195Z,1520668376.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:52:56.571Z,1520668376.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:52:56.967Z,1520668376.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:52:57.368Z,1520668377.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:52:57.769Z,1520668377.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:52:58.174Z,1520668378.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:52:58.570Z,1520668378.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:52:58.969Z,1520668378.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:52:59.366Z,1520668379.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:52:59.772Z,1520668379.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:53:00.182Z,1520668380.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:53:00.580Z,1520668380.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:53:00.971Z,1520668380.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:53:01.366Z,1520668381.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:53:01.774Z,1520668381.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:53:02.175Z,1520668382.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:53:02.581Z,1520668382.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:53:02.970Z,1520668382.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:53:03.377Z,1520668383.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:53:03.781Z,1520668383.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:53:04.177Z,1520668384.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:53:04.579Z,1520668384.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:53:04.967Z,1520668384.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:53:05.368Z,1520668385.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:53:05.780Z,1520668385.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:53:06.177Z,1520668386.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:53:06.578Z,1520668386.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:53:06.966Z,1520668386.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:53:07.373Z,1520668387.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:53:07.786Z,1520668387.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:53:08.172Z,1520668388.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:53:08.578Z,1520668388.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:53:08.969Z,1520668388.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:53:09.371Z,1520668389.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:53:09.777Z,1520668389.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:53:10.184Z,1520668390.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:53:10.581Z,1520668390.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:53:10.970Z,1520668390.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:53:11.373Z,1520668391.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:53:11.781Z,1520668391.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:53:12.178Z,1520668392.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:53:12.584Z,1520668392.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:53:12.957Z,1520668392.957 [BPC1](ERROR): Failed to receive battery data
2018-03-10T07:53:12.957Z,1520668392.957 [BPC1] Communications Fault, FailCount= 2
2018-03-10T07:53:12.957Z,1520668392.957 [BPC1](ERROR): Communications Fault
2018-03-10T07:53:12.965Z,1520668392.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:53:12.979Z,1520668392.979 [CBIT](ERROR): Communications Fault in component: BPC1
2018-03-10T07:53:13.369Z,1520668393.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:53:13.773Z,1520668393.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:53:14.175Z,1520668394.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:53:14.188Z,1520668394.188 [CBIT](INFO): Clearing failed state for component BPC1
2018-03-10T07:53:14.188Z,1520668394.188 [BPC1] No Fault, FailCount= 2
2018-03-10T07:53:14.649Z,1520668394.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:53:14.967Z,1520668394.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:53:15.367Z,1520668395.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:53:15.771Z,1520668395.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:53:16.184Z,1520668396.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:53:16.574Z,1520668396.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:53:19.681Z,1520668399.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:53:19.816Z,1520668399.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:53:20.210Z,1520668400.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:53:20.613Z,1520668400.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:53:21.012Z,1520668401.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:53:21.383Z,1520668401.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:53:21.788Z,1520668401.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:53:22.189Z,1520668402.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:53:22.584Z,1520668402.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:53:22.994Z,1520668402.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:53:23.391Z,1520668403.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:53:23.800Z,1520668403.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:53:24.186Z,1520668404.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:53:24.588Z,1520668404.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:53:24.986Z,1520668404.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:53:25.393Z,1520668405.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:53:25.798Z,1520668405.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:53:26.209Z,1520668406.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:53:26.594Z,1520668406.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:53:26.987Z,1520668406.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:53:27.389Z,1520668407.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:53:27.796Z,1520668407.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:53:28.194Z,1520668408.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:53:28.597Z,1520668408.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:53:28.984Z,1520668408.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:53:29.391Z,1520668409.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:53:29.798Z,1520668409.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:53:30.197Z,1520668410.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:53:30.598Z,1520668410.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:53:30.991Z,1520668410.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:53:31.392Z,1520668411.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:53:31.801Z,1520668411.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:53:32.208Z,1520668412.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:53:32.609Z,1520668412.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:53:32.993Z,1520668412.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:53:33.391Z,1520668413.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:53:33.793Z,1520668413.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:53:34.191Z,1520668414.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:53:34.586Z,1520668414.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:53:35.001Z,1520668415.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:53:35.405Z,1520668415.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:53:35.809Z,1520668415.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:53:36.188Z,1520668416.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:53:36.589Z,1520668416.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:53:36.990Z,1520668416.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:53:37.393Z,1520668417.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:53:37.802Z,1520668417.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:53:38.202Z,1520668418.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:53:38.603Z,1520668418.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:53:38.988Z,1520668418.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:53:39.396Z,1520668419.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:53:39.781Z,1520668419.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:53:40.185Z,1520668420.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:53:40.580Z,1520668420.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:53:40.990Z,1520668420.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:53:41.394Z,1520668421.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:53:41.790Z,1520668421.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:53:42.185Z,1520668422.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:53:42.585Z,1520668422.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:53:42.987Z,1520668422.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:53:43.387Z,1520668423.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:53:43.787Z,1520668423.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:53:44.190Z,1520668424.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:53:44.598Z,1520668424.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:53:44.981Z,1520668424.981 [BPC1](FAULT): Failed to initialize
2018-03-10T07:53:44.981Z,1520668424.981 [BPC1] Communications Fault, FailCount= 3
2018-03-10T07:53:44.981Z,1520668424.981 [BPC1](ERROR): Communications Fault
2018-03-10T07:53:44.989Z,1520668424.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:53:45.002Z,1520668425.002 [CBIT](ERROR): Communications Fault in component: BPC1
2018-03-10T07:53:45.405Z,1520668425.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:53:45.789Z,1520668425.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:53:46.207Z,1520668426.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:53:46.263Z,1520668426.263 [CBIT](INFO): Clearing failed state for component BPC1
2018-03-10T07:53:46.263Z,1520668426.263 [BPC1] No Fault, FailCount= 3
2018-03-10T07:53:46.677Z,1520668426.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:53:47.009Z,1520668427.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:53:47.411Z,1520668427.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:53:47.803Z,1520668427.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:53:48.186Z,1520668428.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:53:48.583Z,1520668428.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:53:48.992Z,1520668428.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:53:49.421Z,1520668429.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:53:49.793Z,1520668429.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:53:50.195Z,1520668430.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:53:50.601Z,1520668430.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:53:50.989Z,1520668430.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:53:51.390Z,1520668431.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:53:51.789Z,1520668431.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:53:52.182Z,1520668432.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:53:52.589Z,1520668432.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:53:52.995Z,1520668432.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:53:53.395Z,1520668433.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:53:53.801Z,1520668433.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:53:54.193Z,1520668434.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:53:54.587Z,1520668434.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:53:54.999Z,1520668434.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:53:55.393Z,1520668435.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:53:55.798Z,1520668435.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:53:56.199Z,1520668436.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:53:56.592Z,1520668436.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:53:56.984Z,1520668436.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:53:57.386Z,1520668437.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:53:57.795Z,1520668437.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:53:58.201Z,1520668438.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:53:58.602Z,1520668438.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:53:58.993Z,1520668438.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:53:59.381Z,1520668439.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:53:59.796Z,1520668439.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:54:00.192Z,1520668440.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:54:00.589Z,1520668440.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:54:01.005Z,1520668441.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:54:01.401Z,1520668441.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:54:01.789Z,1520668441.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:54:02.192Z,1520668442.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:54:02.583Z,1520668442.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:54:02.987Z,1520668442.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:54:03.392Z,1520668443.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:54:03.791Z,1520668443.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:54:04.194Z,1520668444.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:54:04.599Z,1520668444.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:54:04.982Z,1520668444.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:54:05.386Z,1520668445.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:54:05.792Z,1520668445.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:54:06.183Z,1520668446.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:54:06.587Z,1520668446.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:54:07.004Z,1520668447.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:54:07.409Z,1520668447.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:54:07.805Z,1520668447.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:54:08.197Z,1520668448.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:54:08.582Z,1520668448.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:54:08.993Z,1520668448.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:54:09.391Z,1520668449.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:54:09.803Z,1520668449.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:54:10.198Z,1520668450.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:54:10.600Z,1520668450.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:54:10.992Z,1520668450.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:54:11.383Z,1520668451.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:54:11.838Z,1520668451.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:54:12.196Z,1520668452.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:54:12.639Z,1520668452.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:54:12.990Z,1520668452.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:54:13.401Z,1520668453.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:54:13.790Z,1520668453.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:54:14.188Z,1520668454.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:54:14.191Z,1520668454.191 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-03-10T07:54:14.191Z,1520668454.191 [Default:CheckIn:C.Wait] Stopped
2018-03-10T07:54:14.191Z,1520668454.191 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-03-10T07:54:14.192Z,1520668454.192 [Default:CheckIn:D] Running Loop=1
2018-03-10T07:54:14.589Z,1520668454.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:54:14.596Z,1520668454.596 [Default:CheckIn:D] Stopped
2018-03-10T07:54:14.596Z,1520668454.596 [Default:CheckIn:E] Running Loop=1
2018-03-10T07:54:14.981Z,1520668454.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:54:14.985Z,1520668454.985 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 154.944580 min 
2018-03-10T07:54:14.985Z,1520668454.985 [Default:CheckIn:E] Stopped
2018-03-10T07:54:14.985Z,1520668454.985 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-03-10T07:54:14.985Z,1520668454.985 [Default:CheckIn] Stopped
2018-03-10T07:54:14.985Z,1520668454.985 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-03-10T07:54:14.985Z,1520668454.985 [Default:CheckIn](INFO): Running loop #16
2018-03-10T07:54:14.985Z,1520668454.985 [Default:CheckIn] Running Loop=16
2018-03-10T07:54:14.985Z,1520668454.985 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-03-10T07:54:14.986Z,1520668454.986 [Default:CheckIn:Read_GPS] Running Loop=1
2018-03-10T07:54:18.181Z,1520668458.181 [BPC1](FAULT): Failed to initialize
2018-03-10T07:54:18.181Z,1520668458.181 [BPC1] Communications Fault, FailCount= 4
2018-03-10T07:54:18.181Z,1520668458.181 [BPC1](ERROR): Communications Fault
2018-03-10T07:54:18.189Z,1520668458.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:54:18.201Z,1520668458.201 [CBIT](ERROR): Communications Fault in component: BPC1
2018-03-10T07:54:18.330Z,1520668458.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:54:18.685Z,1520668458.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:54:19.089Z,1520668459.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:54:19.101Z,1520668459.101 [CBIT](INFO): Clearing failed state for component BPC1
2018-03-10T07:54:19.101Z,1520668459.101 [BPC1] No Fault, FailCount= 4
2018-03-10T07:54:19.528Z,1520668459.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:54:19.889Z,1520668459.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:54:20.260Z,1520668460.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:54:20.661Z,1520668460.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:54:21.085Z,1520668461.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:54:21.489Z,1520668461.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:54:21.865Z,1520668461.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:54:22.260Z,1520668462.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:54:22.685Z,1520668462.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:54:23.083Z,1520668463.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:54:23.458Z,1520668463.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:54:23.890Z,1520668463.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:54:24.289Z,1520668464.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:54:24.688Z,1520668464.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:54:25.069Z,1520668465.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:54:25.461Z,1520668465.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:54:25.884Z,1520668465.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:54:26.285Z,1520668466.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:54:26.664Z,1520668466.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:54:27.089Z,1520668467.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:54:27.489Z,1520668467.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:54:27.869Z,1520668467.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:54:28.269Z,1520668468.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:54:28.663Z,1520668468.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:54:29.066Z,1520668469.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:54:29.463Z,1520668469.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:54:29.886Z,1520668469.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:54:30.263Z,1520668470.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:54:30.687Z,1520668470.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:54:31.069Z,1520668471.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:54:31.469Z,1520668471.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:54:31.864Z,1520668471.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:54:32.266Z,1520668472.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:54:32.660Z,1520668472.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:54:33.092Z,1520668473.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:54:33.487Z,1520668473.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:54:33.956Z,1520668473.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:54:34.272Z,1520668474.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:54:34.677Z,1520668474.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:54:35.060Z,1520668475.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:54:35.467Z,1520668475.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:54:35.899Z,1520668475.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:54:36.276Z,1520668476.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:54:36.670Z,1520668476.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:54:37.068Z,1520668477.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:54:37.467Z,1520668477.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:54:37.870Z,1520668477.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:54:38.266Z,1520668478.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:54:38.668Z,1520668478.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:54:39.073Z,1520668479.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:54:39.471Z,1520668479.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:54:39.896Z,1520668479.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:54:40.292Z,1520668480.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:54:40.677Z,1520668480.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:54:41.073Z,1520668481.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:54:41.463Z,1520668481.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:54:41.869Z,1520668481.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:54:42.277Z,1520668482.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:54:42.677Z,1520668482.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:54:43.063Z,1520668483.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:54:43.468Z,1520668483.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:54:43.866Z,1520668483.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:54:44.268Z,1520668484.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:54:44.666Z,1520668484.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:54:45.077Z,1520668485.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:54:45.473Z,1520668485.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:54:45.877Z,1520668485.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:54:46.264Z,1520668486.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:54:46.676Z,1520668486.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:54:47.095Z,1520668487.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:54:47.473Z,1520668487.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:54:47.870Z,1520668487.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:54:48.273Z,1520668488.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:54:48.670Z,1520668488.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:54:49.067Z,1520668489.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:54:49.473Z,1520668489.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:54:49.860Z,1520668489.860 [BPC1](FAULT): Failed to initialize
2018-03-10T07:54:49.861Z,1520668489.861 [BPC1] Communications Fault, FailCount= 5
2018-03-10T07:54:49.861Z,1520668489.861 [BPC1](ERROR): Communications Fault
2018-03-10T07:54:49.868Z,1520668489.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:54:49.881Z,1520668489.881 [CBIT](ERROR): Communications Fault in component: BPC1
2018-03-10T07:54:50.264Z,1520668490.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:54:50.673Z,1520668490.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:54:51.071Z,1520668491.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:54:51.100Z,1520668491.100 [CBIT](INFO): Clearing failed state for component BPC1
2018-03-10T07:54:51.100Z,1520668491.100 [BPC1] No Fault, FailCount= 5
2018-03-10T07:54:51.525Z,1520668491.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:54:51.872Z,1520668491.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:54:52.273Z,1520668492.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:54:52.666Z,1520668492.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:54:53.069Z,1520668493.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:54:53.466Z,1520668493.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:54:53.875Z,1520668493.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:54:54.277Z,1520668494.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:54:54.671Z,1520668494.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:54:55.067Z,1520668495.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:54:55.473Z,1520668495.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:54:55.866Z,1520668495.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:54:56.269Z,1520668496.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:54:56.681Z,1520668496.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:54:57.077Z,1520668497.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:54:57.470Z,1520668497.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:54:57.877Z,1520668497.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:54:58.266Z,1520668498.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:54:58.667Z,1520668498.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:54:59.066Z,1520668499.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:54:59.467Z,1520668499.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:54:59.874Z,1520668499.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:55:00.277Z,1520668500.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:55:00.670Z,1520668500.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:55:01.068Z,1520668501.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:55:01.469Z,1520668501.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:55:01.873Z,1520668501.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:55:02.266Z,1520668502.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:55:02.668Z,1520668502.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:55:03.070Z,1520668503.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:55:03.472Z,1520668503.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:55:03.870Z,1520668503.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:55:04.281Z,1520668504.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:55:04.673Z,1520668504.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:55:05.068Z,1520668505.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:55:05.467Z,1520668505.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:55:05.875Z,1520668505.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:55:06.277Z,1520668506.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:55:06.677Z,1520668506.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:55:07.066Z,1520668507.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:55:07.468Z,1520668507.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:55:07.867Z,1520668507.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:55:08.269Z,1520668508.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:55:08.666Z,1520668508.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:55:09.077Z,1520668509.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:55:09.473Z,1520668509.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:55:09.877Z,1520668509.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:55:10.273Z,1520668510.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:55:10.696Z,1520668510.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:55:11.095Z,1520668511.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:55:11.467Z,1520668511.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:55:11.876Z,1520668511.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:55:12.273Z,1520668512.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:55:12.673Z,1520668512.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:55:13.069Z,1520668513.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:55:13.461Z,1520668513.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:55:13.871Z,1520668513.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:55:14.269Z,1520668514.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:55:14.673Z,1520668514.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:55:15.071Z,1520668515.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:55:18.202Z,1520668518.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:55:18.313Z,1520668518.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:55:18.676Z,1520668518.676 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:55:18.676Z,1520668518.676 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 53
2018-03-10T07:55:18.676Z,1520668518.676 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-03-10T07:55:18.678Z,1520668518.678 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:55:18.678Z,1520668518.678 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 53
2018-03-10T07:55:18.678Z,1520668518.678 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-03-10T07:55:18.680Z,1520668518.680 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:55:18.680Z,1520668518.680 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 53
2018-03-10T07:55:18.680Z,1520668518.680 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-10T07:55:18.704Z,1520668518.704 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-03-10T07:55:18.704Z,1520668518.704 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-03-10T07:55:18.704Z,1520668518.704 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-10T07:55:19.111Z,1520668519.111 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-03-10T07:55:19.111Z,1520668519.111 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 53
2018-03-10T07:55:19.112Z,1520668519.112 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-03-10T07:55:19.112Z,1520668519.112 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 53
2018-03-10T07:55:19.112Z,1520668519.112 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-10T07:55:19.112Z,1520668519.112 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 53
2018-03-10T07:55:19.474Z,1520668519.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-03-10T07:55:19.474Z,1520668519.474 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-03-10T07:55:19.475Z,1520668519.475 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-03-10T07:55:19.475Z,1520668519.475 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-03-10T07:55:19.475Z,1520668519.475 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-03-10T07:55:19.476Z,1520668519.476 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-03-10T07:55:19.476Z,1520668519.476 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-10T07:55:19.477Z,1520668519.477 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-10T07:55:19.477Z,1520668519.477 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-10T07:55:19.883Z,1520668519.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-03-10T07:55:19.884Z,1520668519.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:55:20.285Z,1520668520.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-03-10T07:55:20.285Z,1520668520.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:55:20.681Z,1520668520.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-03-10T07:55:20.682Z,1520668520.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:55:21.081Z,1520668521.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-03-10T07:55:21.082Z,1520668521.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:55:21.480Z,1520668521.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-03-10T07:55:21.481Z,1520668521.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:55:21.866Z,1520668521.866 [BPC1](FAULT): Failed to initialize
2018-03-10T07:55:21.867Z,1520668521.867 [BPC1] Communications Fault, FailCount= 6
2018-03-10T07:55:21.867Z,1520668521.867 [BPC1](ERROR): Communications Fault
2018-03-10T07:55:21.874Z,1520668521.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-03-10T07:55:21.874Z,1520668521.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:55:21.888Z,1520668521.888 [CBIT](ERROR): Communications Fault in component: BPC1
2018-03-10T07:55:22.280Z,1520668522.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-03-10T07:55:22.281Z,1520668522.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:55:22.677Z,1520668522.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-03-10T07:55:22.678Z,1520668522.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:55:23.081Z,1520668523.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-03-10T07:55:23.082Z,1520668523.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:55:23.107Z,1520668523.107 [CBIT](INFO): Clearing failed state for component BPC1
2018-03-10T07:55:23.107Z,1520668523.107 [BPC1] No Fault, FailCount= 6
2018-03-10T07:55:23.557Z,1520668523.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.9 s old, using for 20.0 s.
2018-03-10T07:55:23.558Z,1520668523.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:55:23.910Z,1520668523.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-03-10T07:55:23.911Z,1520668523.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:55:24.277Z,1520668524.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-03-10T07:55:24.278Z,1520668524.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:55:24.676Z,1520668524.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-03-10T07:55:24.677Z,1520668524.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:55:25.080Z,1520668525.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-03-10T07:55:25.081Z,1520668525.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:55:25.477Z,1520668525.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-03-10T07:55:25.478Z,1520668525.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:55:25.964Z,1520668525.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.3 s old, using for 20.0 s.
2018-03-10T07:55:25.965Z,1520668525.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:55:26.294Z,1520668526.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-03-10T07:55:26.295Z,1520668526.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:55:26.700Z,1520668526.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-03-10T07:55:26.701Z,1520668526.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:55:27.093Z,1520668527.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-03-10T07:55:27.094Z,1520668527.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:55:27.119Z,1520668527.119 [CBIT](DEBUG): EFC running - data check-sum false
2018-03-10T07:55:27.471Z,1520668527.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-03-10T07:55:27.472Z,1520668527.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:55:27.864Z,1520668527.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-03-10T07:55:27.865Z,1520668527.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:55:28.274Z,1520668528.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-03-10T07:55:28.275Z,1520668528.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:55:28.677Z,1520668528.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-03-10T07:55:28.677Z,1520668528.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:55:29.108Z,1520668529.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-03-10T07:55:29.109Z,1520668529.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:55:29.493Z,1520668529.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-03-10T07:55:29.494Z,1520668529.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:55:29.917Z,1520668529.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-03-10T07:55:29.918Z,1520668529.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:55:30.274Z,1520668530.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-03-10T07:55:30.276Z,1520668530.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:55:30.678Z,1520668530.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-03-10T07:55:30.679Z,1520668530.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:55:31.071Z,1520668531.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-03-10T07:55:31.072Z,1520668531.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:55:31.484Z,1520668531.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-03-10T07:55:31.485Z,1520668531.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:55:31.885Z,1520668531.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-03-10T07:55:31.886Z,1520668531.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:55:32.290Z,1520668532.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-03-10T07:55:32.290Z,1520668532.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:55:32.686Z,1520668532.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-03-10T07:55:32.686Z,1520668532.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:55:33.089Z,1520668533.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-03-10T07:55:33.089Z,1520668533.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:55:33.479Z,1520668533.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-03-10T07:55:33.480Z,1520668533.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:55:33.874Z,1520668533.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-03-10T07:55:33.875Z,1520668533.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:55:34.280Z,1520668534.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-03-10T07:55:34.281Z,1520668534.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:55:34.680Z,1520668534.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-03-10T07:55:34.681Z,1520668534.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:55:35.092Z,1520668535.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-03-10T07:55:35.093Z,1520668535.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:55:35.490Z,1520668535.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-03-10T07:55:35.491Z,1520668535.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:55:35.894Z,1520668535.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-03-10T07:55:35.895Z,1520668535.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:55:36.275Z,1520668536.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-03-10T07:55:36.276Z,1520668536.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:55:36.682Z,1520668536.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-03-10T07:55:36.684Z,1520668536.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:55:37.078Z,1520668537.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2018-03-10T07:55:37.079Z,1520668537.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:55:37.473Z,1520668537.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2018-03-10T07:55:37.473Z,1520668537.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:55:37.884Z,1520668537.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2018-03-10T07:55:37.885Z,1520668537.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:55:38.292Z,1520668538.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2018-03-10T07:55:38.293Z,1520668538.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:55:38.690Z,1520668538.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:55:39.080Z,1520668539.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:55:39.481Z,1520668539.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:55:39.878Z,1520668539.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:55:40.300Z,1520668540.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:55:40.679Z,1520668540.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:55:41.090Z,1520668541.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:55:41.493Z,1520668541.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:55:41.897Z,1520668541.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:55:42.279Z,1520668542.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:55:42.677Z,1520668542.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:55:43.079Z,1520668543.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:55:43.479Z,1520668543.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:55:43.890Z,1520668543.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:55:44.289Z,1520668544.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:55:44.686Z,1520668544.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:55:45.088Z,1520668545.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:55:45.484Z,1520668545.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:55:45.884Z,1520668545.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:55:46.300Z,1520668546.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:55:46.681Z,1520668546.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:55:47.086Z,1520668547.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:55:47.488Z,1520668547.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:55:47.893Z,1520668547.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:55:48.279Z,1520668548.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:55:48.689Z,1520668548.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:55:49.080Z,1520668549.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:55:49.480Z,1520668549.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:55:49.888Z,1520668549.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:55:50.304Z,1520668550.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:55:50.688Z,1520668550.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:55:51.086Z,1520668551.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:55:51.519Z,1520668551.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:55:51.897Z,1520668551.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:55:52.295Z,1520668552.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:55:52.672Z,1520668552.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:55:53.105Z,1520668553.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:55:53.505Z,1520668553.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:55:53.896Z,1520668553.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:55:54.304Z,1520668554.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:55:54.708Z,1520668554.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:55:55.073Z,1520668555.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:55:55.476Z,1520668555.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:55:55.908Z,1520668555.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:55:56.286Z,1520668556.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:55:56.679Z,1520668556.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:55:57.075Z,1520668557.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:55:57.476Z,1520668557.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:55:57.872Z,1520668557.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:55:58.278Z,1520668558.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:55:58.675Z,1520668558.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:55:59.086Z,1520668559.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:55:59.483Z,1520668559.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:55:59.884Z,1520668559.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:56:00.281Z,1520668560.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:56:00.679Z,1520668560.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:56:01.078Z,1520668561.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:56:01.475Z,1520668561.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:56:01.903Z,1520668561.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:56:02.285Z,1520668562.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:56:02.682Z,1520668562.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:56:03.082Z,1520668563.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:56:03.489Z,1520668563.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:56:03.874Z,1520668563.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:56:04.277Z,1520668564.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:56:04.684Z,1520668564.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:56:05.093Z,1520668565.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:56:05.486Z,1520668565.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:56:05.893Z,1520668565.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:56:06.273Z,1520668566.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:56:06.678Z,1520668566.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:56:07.087Z,1520668567.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:56:07.489Z,1520668567.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:56:07.886Z,1520668567.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:56:08.289Z,1520668568.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:56:08.693Z,1520668568.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:56:09.080Z,1520668569.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:56:09.480Z,1520668569.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:56:09.881Z,1520668569.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:56:10.276Z,1520668570.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:56:10.685Z,1520668570.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:56:11.086Z,1520668571.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:56:11.489Z,1520668571.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:56:11.888Z,1520668571.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:56:12.278Z,1520668572.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:56:12.685Z,1520668572.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:56:13.081Z,1520668573.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:56:13.479Z,1520668573.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:56:13.893Z,1520668573.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:56:14.322Z,1520668574.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:56:14.686Z,1520668574.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:56:15.082Z,1520668575.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:56:18.183Z,1520668578.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:56:18.304Z,1520668578.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:56:18.678Z,1520668578.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:56:19.059Z,1520668579.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:56:19.479Z,1520668579.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:56:19.889Z,1520668579.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:56:20.285Z,1520668580.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:56:20.661Z,1520668580.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:56:21.079Z,1520668581.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:56:21.462Z,1520668581.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:56:21.883Z,1520668581.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:56:22.261Z,1520668582.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:56:22.681Z,1520668582.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:56:23.056Z,1520668583.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:56:23.454Z,1520668583.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:56:23.859Z,1520668583.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:56:24.285Z,1520668584.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:56:24.664Z,1520668584.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:56:25.083Z,1520668585.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:56:25.460Z,1520668585.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:56:25.867Z,1520668585.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:56:26.264Z,1520668586.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:56:26.661Z,1520668586.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:56:27.068Z,1520668587.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:56:27.474Z,1520668587.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:56:27.871Z,1520668587.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:56:28.262Z,1520668588.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:56:28.665Z,1520668588.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:56:29.077Z,1520668589.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:56:29.477Z,1520668589.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:56:29.877Z,1520668589.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:56:30.266Z,1520668590.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:56:30.673Z,1520668590.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:56:31.063Z,1520668591.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:56:31.461Z,1520668591.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:56:31.859Z,1520668591.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:56:32.293Z,1520668592.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:56:32.701Z,1520668592.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:56:33.101Z,1520668593.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:56:33.471Z,1520668593.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:56:33.870Z,1520668593.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:56:34.273Z,1520668594.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:56:34.677Z,1520668594.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:56:35.061Z,1520668595.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:56:35.476Z,1520668595.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:56:35.874Z,1520668595.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:56:36.284Z,1520668596.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:56:36.666Z,1520668596.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:56:37.065Z,1520668597.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:56:37.469Z,1520668597.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:56:37.861Z,1520668597.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:56:38.254Z,1520668598.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:56:38.677Z,1520668598.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:56:39.096Z,1520668599.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:56:39.465Z,1520668599.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:56:39.866Z,1520668599.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:56:40.273Z,1520668600.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:56:40.665Z,1520668600.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:56:41.061Z,1520668601.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:56:41.461Z,1520668601.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:56:41.870Z,1520668601.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:56:42.266Z,1520668602.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:56:42.673Z,1520668602.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:56:43.068Z,1520668603.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:56:43.469Z,1520668603.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:56:43.866Z,1520668603.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:56:44.269Z,1520668604.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:56:44.669Z,1520668604.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:56:45.101Z,1520668605.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:56:45.477Z,1520668605.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:56:45.873Z,1520668605.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:56:46.262Z,1520668606.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:56:46.669Z,1520668606.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:56:47.067Z,1520668607.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:56:47.481Z,1520668607.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:56:47.885Z,1520668607.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:56:48.281Z,1520668608.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:56:48.672Z,1520668608.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:56:49.072Z,1520668609.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:56:49.448Z,1520668609.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:56:49.877Z,1520668609.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:56:50.278Z,1520668610.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:56:50.653Z,1520668610.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:56:51.077Z,1520668611.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:56:51.472Z,1520668611.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:56:51.874Z,1520668611.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:56:52.277Z,1520668612.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:56:52.651Z,1520668612.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:56:53.075Z,1520668613.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:56:53.457Z,1520668613.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:56:53.878Z,1520668613.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:56:54.277Z,1520668614.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:56:54.681Z,1520668614.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:56:55.084Z,1520668615.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:56:55.452Z,1520668615.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:56:55.884Z,1520668615.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:56:56.280Z,1520668616.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:56:56.653Z,1520668616.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:56:57.088Z,1520668617.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:56:57.487Z,1520668617.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:56:57.879Z,1520668617.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:56:58.281Z,1520668618.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:56:58.684Z,1520668618.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:56:59.057Z,1520668619.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:56:59.485Z,1520668619.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:56:59.862Z,1520668619.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:57:00.283Z,1520668620.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:57:00.656Z,1520668620.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:57:01.063Z,1520668621.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:57:01.457Z,1520668621.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:57:01.863Z,1520668621.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:57:02.257Z,1520668622.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:57:02.679Z,1520668622.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:57:03.084Z,1520668623.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:57:03.466Z,1520668623.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:57:03.865Z,1520668623.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:57:04.279Z,1520668624.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:57:04.657Z,1520668624.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:57:05.056Z,1520668625.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:57:05.458Z,1520668625.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:57:05.887Z,1520668625.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:57:06.283Z,1520668626.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:57:06.684Z,1520668626.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:57:07.057Z,1520668627.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:57:07.479Z,1520668627.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:57:07.858Z,1520668627.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:57:08.257Z,1520668628.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:57:08.665Z,1520668628.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:57:09.089Z,1520668629.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:57:09.488Z,1520668629.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:57:09.893Z,1520668629.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:57:10.260Z,1520668630.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:57:10.700Z,1520668630.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:57:11.089Z,1520668631.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:57:11.477Z,1520668631.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:57:11.868Z,1520668631.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:57:12.269Z,1520668632.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:57:12.669Z,1520668632.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:57:13.061Z,1520668633.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:57:13.460Z,1520668633.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:57:13.873Z,1520668633.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:57:14.269Z,1520668634.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:57:14.665Z,1520668634.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:57:15.096Z,1520668635.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:57:15.476Z,1520668635.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:57:18.571Z,1520668638.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:57:18.701Z,1520668638.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:57:19.068Z,1520668639.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:57:19.460Z,1520668639.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:57:19.870Z,1520668639.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:57:20.277Z,1520668640.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:57:20.678Z,1520668640.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:57:21.085Z,1520668641.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:57:21.462Z,1520668641.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:57:21.880Z,1520668641.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:57:22.305Z,1520668642.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:57:22.681Z,1520668642.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:57:23.071Z,1520668643.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:57:23.476Z,1520668643.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:57:23.877Z,1520668643.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:57:24.273Z,1520668644.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:57:24.668Z,1520668644.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:57:25.070Z,1520668645.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:57:25.465Z,1520668645.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:57:25.893Z,1520668645.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:57:26.269Z,1520668646.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:57:26.672Z,1520668646.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:57:27.068Z,1520668647.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:57:27.469Z,1520668647.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:57:27.869Z,1520668647.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:57:28.270Z,1520668648.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:57:28.677Z,1520668648.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:57:29.074Z,1520668649.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:57:29.470Z,1520668649.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:57:29.876Z,1520668649.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:57:30.269Z,1520668650.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:57:30.668Z,1520668650.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:57:31.066Z,1520668651.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:57:31.472Z,1520668651.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:57:31.894Z,1520668651.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:57:32.297Z,1520668652.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:57:32.681Z,1520668652.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:57:33.077Z,1520668653.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:57:33.473Z,1520668653.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:57:33.889Z,1520668653.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:57:34.274Z,1520668654.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:57:34.677Z,1520668654.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:57:35.077Z,1520668655.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:57:35.476Z,1520668655.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:57:35.877Z,1520668655.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:57:36.276Z,1520668656.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:57:36.673Z,1520668656.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:57:37.071Z,1520668657.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:57:37.477Z,1520668657.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:57:37.878Z,1520668657.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:57:38.285Z,1520668658.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:57:38.677Z,1520668658.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:57:39.072Z,1520668659.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:57:39.477Z,1520668659.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:57:39.889Z,1520668659.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:57:40.281Z,1520668660.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:57:40.669Z,1520668660.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:57:41.088Z,1520668661.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:57:41.480Z,1520668661.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:57:41.874Z,1520668661.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:57:42.254Z,1520668662.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:57:42.680Z,1520668662.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:57:43.084Z,1520668663.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:57:43.482Z,1520668663.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:57:43.876Z,1520668663.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:57:44.285Z,1520668664.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:57:44.679Z,1520668664.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:57:45.061Z,1520668665.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:57:45.461Z,1520668665.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:57:45.865Z,1520668665.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:57:46.301Z,1520668666.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:57:46.662Z,1520668666.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:57:47.091Z,1520668667.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:57:47.474Z,1520668667.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:57:47.902Z,1520668667.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:57:48.271Z,1520668668.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:57:48.677Z,1520668668.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:57:49.077Z,1520668669.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:57:49.504Z,1520668669.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:57:49.904Z,1520668669.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:57:50.270Z,1520668670.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:57:50.673Z,1520668670.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:57:51.069Z,1520668671.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:57:51.459Z,1520668671.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:57:51.864Z,1520668671.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:57:52.277Z,1520668672.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:57:52.705Z,1520668672.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:57:53.104Z,1520668673.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:57:53.468Z,1520668673.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:57:53.870Z,1520668673.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:57:54.273Z,1520668674.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:57:54.677Z,1520668674.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:57:55.063Z,1520668675.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:57:55.472Z,1520668675.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:57:55.881Z,1520668675.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:57:56.274Z,1520668676.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:57:56.680Z,1520668676.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:57:57.064Z,1520668677.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:57:57.464Z,1520668677.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:57:57.867Z,1520668677.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:57:58.263Z,1520668678.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:57:58.667Z,1520668678.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:57:59.078Z,1520668679.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:57:59.475Z,1520668679.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:57:59.875Z,1520668679.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:58:00.273Z,1520668680.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:58:00.666Z,1520668680.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:58:01.064Z,1520668681.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:58:01.450Z,1520668681.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:58:01.880Z,1520668681.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:58:02.278Z,1520668682.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:58:02.676Z,1520668682.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:58:03.075Z,1520668683.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:58:03.480Z,1520668683.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:58:03.882Z,1520668683.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:58:04.275Z,1520668684.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:58:04.681Z,1520668684.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:58:05.087Z,1520668685.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:58:05.497Z,1520668685.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:58:05.917Z,1520668685.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:58:06.261Z,1520668686.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:58:06.684Z,1520668686.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:58:07.080Z,1520668687.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:58:07.459Z,1520668687.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:58:07.881Z,1520668687.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:58:08.285Z,1520668688.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:58:08.678Z,1520668688.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:58:09.054Z,1520668689.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:58:09.461Z,1520668689.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:58:09.883Z,1520668689.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:58:10.276Z,1520668690.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:58:10.677Z,1520668690.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:58:11.062Z,1520668691.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:58:11.484Z,1520668691.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:58:11.885Z,1520668691.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:58:12.259Z,1520668692.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:58:12.660Z,1520668692.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:58:13.076Z,1520668693.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:58:13.459Z,1520668693.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:58:13.884Z,1520668693.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:58:14.263Z,1520668694.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:58:14.685Z,1520668694.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:58:15.061Z,1520668695.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:58:15.459Z,1520668695.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:58:18.599Z,1520668698.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:58:18.769Z,1520668698.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:58:19.093Z,1520668699.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:58:19.501Z,1520668699.501 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:58:19.501Z,1520668699.501 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 54
2018-03-10T07:58:19.501Z,1520668699.501 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-03-10T07:58:19.502Z,1520668699.502 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:58:19.503Z,1520668699.503 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 54
2018-03-10T07:58:19.503Z,1520668699.503 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-03-10T07:58:19.504Z,1520668699.504 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:58:19.504Z,1520668699.504 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 54
2018-03-10T07:58:19.504Z,1520668699.504 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-10T07:58:19.516Z,1520668699.516 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-03-10T07:58:19.516Z,1520668699.516 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-03-10T07:58:19.516Z,1520668699.516 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-10T07:58:19.900Z,1520668699.900 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-03-10T07:58:19.900Z,1520668699.900 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 54
2018-03-10T07:58:19.900Z,1520668699.900 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-03-10T07:58:19.900Z,1520668699.900 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 54
2018-03-10T07:58:19.901Z,1520668699.901 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-10T07:58:19.901Z,1520668699.901 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 54
2018-03-10T07:58:20.269Z,1520668700.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-03-10T07:58:20.270Z,1520668700.270 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-03-10T07:58:20.270Z,1520668700.270 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-03-10T07:58:20.275Z,1520668700.275 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-03-10T07:58:20.275Z,1520668700.275 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-03-10T07:58:20.275Z,1520668700.275 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-03-10T07:58:20.276Z,1520668700.276 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-10T07:58:20.276Z,1520668700.276 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-10T07:58:20.277Z,1520668700.277 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-10T07:58:20.680Z,1520668700.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-03-10T07:58:20.681Z,1520668700.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:58:21.076Z,1520668701.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-03-10T07:58:21.077Z,1520668701.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:58:21.474Z,1520668701.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-03-10T07:58:21.475Z,1520668701.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:58:21.876Z,1520668701.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-03-10T07:58:21.877Z,1520668701.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:58:22.275Z,1520668702.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-03-10T07:58:22.276Z,1520668702.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:58:22.699Z,1520668702.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-03-10T07:58:22.700Z,1520668702.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:58:23.074Z,1520668703.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-03-10T07:58:23.074Z,1520668703.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:58:23.476Z,1520668703.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-03-10T07:58:23.477Z,1520668703.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:58:23.883Z,1520668703.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-03-10T07:58:23.884Z,1520668703.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:58:24.277Z,1520668704.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-03-10T07:58:24.278Z,1520668704.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:58:24.674Z,1520668704.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-03-10T07:58:24.675Z,1520668704.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:58:25.079Z,1520668705.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-03-10T07:58:25.080Z,1520668705.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:58:25.478Z,1520668705.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-03-10T07:58:25.479Z,1520668705.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:58:25.881Z,1520668705.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-03-10T07:58:25.882Z,1520668705.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:58:26.272Z,1520668706.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-03-10T07:58:26.273Z,1520668706.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:58:26.675Z,1520668706.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-03-10T07:58:26.676Z,1520668706.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:58:27.074Z,1520668707.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-03-10T07:58:27.076Z,1520668707.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:58:27.474Z,1520668707.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-03-10T07:58:27.475Z,1520668707.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:58:27.889Z,1520668707.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-03-10T07:58:27.890Z,1520668707.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:58:28.285Z,1520668708.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-03-10T07:58:28.286Z,1520668708.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:58:28.693Z,1520668708.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-03-10T07:58:28.694Z,1520668708.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:58:29.077Z,1520668709.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-03-10T07:58:29.078Z,1520668709.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:58:29.476Z,1520668709.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-03-10T07:58:29.477Z,1520668709.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:58:29.889Z,1520668709.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-03-10T07:58:29.890Z,1520668709.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:58:30.285Z,1520668710.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-03-10T07:58:30.286Z,1520668710.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:58:30.677Z,1520668710.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-03-10T07:58:30.678Z,1520668710.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:58:31.078Z,1520668711.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-03-10T07:58:31.080Z,1520668711.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:58:31.489Z,1520668711.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-03-10T07:58:31.490Z,1520668711.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:58:31.874Z,1520668711.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-03-10T07:58:31.875Z,1520668711.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:58:32.280Z,1520668712.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-03-10T07:58:32.281Z,1520668712.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:58:32.715Z,1520668712.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-03-10T07:58:32.716Z,1520668712.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:58:33.067Z,1520668713.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-03-10T07:58:33.068Z,1520668713.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:58:33.462Z,1520668713.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-03-10T07:58:33.463Z,1520668713.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:58:33.876Z,1520668713.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-03-10T07:58:33.877Z,1520668713.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:58:34.272Z,1520668714.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-03-10T07:58:34.273Z,1520668714.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:58:34.681Z,1520668714.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-03-10T07:58:34.682Z,1520668714.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:58:35.062Z,1520668715.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-03-10T07:58:35.063Z,1520668715.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:58:35.472Z,1520668715.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-03-10T07:58:35.473Z,1520668715.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:58:35.872Z,1520668715.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-03-10T07:58:35.873Z,1520668715.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:58:36.266Z,1520668716.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-03-10T07:58:36.267Z,1520668716.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:58:36.684Z,1520668716.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-03-10T07:58:36.685Z,1520668716.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:58:37.077Z,1520668717.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-03-10T07:58:37.078Z,1520668717.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:58:37.494Z,1520668717.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-03-10T07:58:37.495Z,1520668717.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:58:37.882Z,1520668717.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2018-03-10T07:58:37.899Z,1520668717.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:58:38.269Z,1520668718.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2018-03-10T07:58:38.270Z,1520668718.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:58:38.676Z,1520668718.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2018-03-10T07:58:38.677Z,1520668718.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:58:39.075Z,1520668719.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2018-03-10T07:58:39.076Z,1520668719.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:58:39.473Z,1520668719.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 20.0 s old, using for 20.0 s.
2018-03-10T07:58:39.474Z,1520668719.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:58:39.878Z,1520668719.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:58:40.281Z,1520668720.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:58:40.677Z,1520668720.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:58:41.072Z,1520668721.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:58:41.478Z,1520668721.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:58:41.905Z,1520668721.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:58:42.277Z,1520668722.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:58:42.674Z,1520668722.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:58:43.079Z,1520668723.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:58:43.487Z,1520668723.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:58:43.909Z,1520668723.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:58:44.273Z,1520668724.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:58:44.684Z,1520668724.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:58:45.071Z,1520668725.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:58:45.472Z,1520668725.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:58:45.882Z,1520668725.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:58:46.282Z,1520668726.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:58:46.684Z,1520668726.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:58:47.073Z,1520668727.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:58:47.471Z,1520668727.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:58:47.872Z,1520668727.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:58:48.273Z,1520668728.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:58:48.677Z,1520668728.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:58:49.089Z,1520668729.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:58:49.482Z,1520668729.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:58:49.884Z,1520668729.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:58:50.275Z,1520668730.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:58:50.681Z,1520668730.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:58:51.075Z,1520668731.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:58:51.472Z,1520668731.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:58:51.885Z,1520668731.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:58:52.281Z,1520668732.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:58:52.682Z,1520668732.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:58:53.083Z,1520668733.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:58:53.493Z,1520668733.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:58:53.881Z,1520668733.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:58:54.274Z,1520668734.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:58:54.685Z,1520668734.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:58:55.089Z,1520668735.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:58:55.486Z,1520668735.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:58:55.892Z,1520668735.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:58:56.293Z,1520668736.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:58:56.676Z,1520668736.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:58:57.075Z,1520668737.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:58:57.481Z,1520668737.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:58:57.889Z,1520668737.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:58:58.293Z,1520668738.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:58:58.687Z,1520668738.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:58:59.074Z,1520668739.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:58:59.477Z,1520668739.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:58:59.877Z,1520668739.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:59:00.285Z,1520668740.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:59:00.678Z,1520668740.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:59:01.086Z,1520668741.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:59:01.492Z,1520668741.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:59:01.924Z,1520668741.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:59:02.283Z,1520668742.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:59:02.692Z,1520668742.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:59:03.080Z,1520668743.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:59:03.476Z,1520668743.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:59:03.897Z,1520668743.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:59:04.293Z,1520668744.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:59:04.708Z,1520668744.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:59:05.066Z,1520668745.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:59:05.470Z,1520668745.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:59:05.871Z,1520668745.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:59:06.274Z,1520668746.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:59:06.675Z,1520668746.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:59:07.101Z,1520668747.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:59:07.503Z,1520668747.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:59:07.877Z,1520668747.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:59:08.277Z,1520668748.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:59:08.676Z,1520668748.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:59:09.096Z,1520668749.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:59:09.498Z,1520668749.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:59:09.878Z,1520668749.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:59:10.279Z,1520668750.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:59:10.681Z,1520668750.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:59:11.076Z,1520668751.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:59:11.477Z,1520668751.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:59:11.877Z,1520668751.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:59:12.276Z,1520668752.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:59:12.675Z,1520668752.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:59:13.079Z,1520668753.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:59:13.478Z,1520668753.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:59:13.881Z,1520668753.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:59:14.275Z,1520668754.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:59:14.674Z,1520668754.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:59:15.074Z,1520668755.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:59:15.078Z,1520668755.078 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-03-10T07:54:14.0Z
2018-03-10T07:59:15.078Z,1520668755.078 [Default:CheckIn:Read_GPS] Stopped
2018-03-10T07:59:15.078Z,1520668755.078 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-03-10T07:59:15.477Z,1520668755.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:59:18.733Z,1520668758.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:59:18.873Z,1520668758.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:59:19.193Z,1520668759.193 [DataOverHttps](INFO): Sending 69 bytes from file Logs/20180310T051512/Courier0064.lzma
2018-03-10T07:59:19.252Z,1520668759.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:59:19.637Z,1520668759.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:59:19.989Z,1520668759.989 [DataOverHttps](INFO): Moved sent file to Logs/20180310T051512/Courier0064.lzma.bak
2018-03-10T07:59:19.989Z,1520668759.989 [DataOverHttps](INFO): SBD MOMSN=8002924
2018-03-10T07:59:20.048Z,1520668760.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:59:20.699Z,1520668760.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:59:20.893Z,1520668760.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:59:21.249Z,1520668761.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:59:24.345Z,1520668764.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:59:24.497Z,1520668764.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:59:24.850Z,1520668764.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:59:25.248Z,1520668765.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:59:25.650Z,1520668765.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:59:26.058Z,1520668766.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:59:26.457Z,1520668766.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:59:26.855Z,1520668766.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:59:27.273Z,1520668767.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:59:27.645Z,1520668767.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:59:28.050Z,1520668768.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:59:31.157Z,1520668771.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:59:31.334Z,1520668771.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:59:31.627Z,1520668771.627 [DataOverHttps](INFO): Sending 178 bytes from file Logs/20180310T051512/Express0065.lzma
2018-03-10T07:59:31.694Z,1520668771.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:59:32.085Z,1520668772.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:59:32.429Z,1520668772.429 [DataOverHttps](INFO): Moved sent file to Logs/20180310T051512/Express0065.lzma.bak
2018-03-10T07:59:32.429Z,1520668772.429 [DataOverHttps](INFO): SBD MOMSN=8002927
2018-03-10T07:59:32.498Z,1520668772.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:59:33.146Z,1520668773.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:59:33.149Z,1520668773.149 [Default:CheckIn:Read_Iridium] Stopped
2018-03-10T07:59:33.149Z,1520668773.149 [Default:CheckIn:C.Wait] Running Loop=1
2018-03-10T07:59:33.149Z,1520668773.149 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-03-10T07:59:33.285Z,1520668773.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:59:33.689Z,1520668773.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:59:36.795Z,1520668776.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:59:36.945Z,1520668776.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:59:37.268Z,1520668777.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:59:37.661Z,1520668777.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:59:38.063Z,1520668778.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:59:38.465Z,1520668778.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:59:38.874Z,1520668778.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:59:39.267Z,1520668779.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:59:39.692Z,1520668779.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:59:40.066Z,1520668780.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:59:40.463Z,1520668780.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:59:40.866Z,1520668780.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:59:41.262Z,1520668781.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:59:41.665Z,1520668781.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:59:42.073Z,1520668782.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:59:42.497Z,1520668782.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:59:42.878Z,1520668782.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:59:43.267Z,1520668783.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:59:43.665Z,1520668783.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:59:44.069Z,1520668784.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:59:44.467Z,1520668784.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:59:44.871Z,1520668784.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:59:45.274Z,1520668785.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:59:45.670Z,1520668785.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:59:46.066Z,1520668786.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:59:46.464Z,1520668786.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:59:46.968Z,1520668786.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:59:47.270Z,1520668787.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:59:47.656Z,1520668787.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:59:48.073Z,1520668788.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:59:48.476Z,1520668788.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:59:48.909Z,1520668788.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:59:49.301Z,1520668789.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:59:49.665Z,1520668789.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:59:50.058Z,1520668790.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:59:50.457Z,1520668790.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:59:50.877Z,1520668790.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:59:51.285Z,1520668791.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:59:51.688Z,1520668791.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:59:52.068Z,1520668792.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:59:52.481Z,1520668792.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:59:52.884Z,1520668792.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:59:53.277Z,1520668793.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:59:53.675Z,1520668793.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:59:54.079Z,1520668794.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:59:54.477Z,1520668794.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:59:54.878Z,1520668794.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:59:55.275Z,1520668795.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:59:55.677Z,1520668795.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:59:56.075Z,1520668796.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:59:56.475Z,1520668796.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:59:56.881Z,1520668796.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:59:57.282Z,1520668797.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:59:57.684Z,1520668797.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:59:58.076Z,1520668798.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:59:58.476Z,1520668798.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:59:58.885Z,1520668798.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:59:59.260Z,1520668799.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T07:59:59.689Z,1520668799.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:00:00.089Z,1520668800.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:00:00.488Z,1520668800.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:00:00.889Z,1520668800.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:00:01.302Z,1520668801.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:00:01.689Z,1520668801.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:00:02.073Z,1520668802.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:00:02.469Z,1520668802.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:00:02.872Z,1520668802.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:00:03.277Z,1520668803.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:00:03.672Z,1520668803.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:00:04.068Z,1520668804.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:00:04.461Z,1520668804.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:00:04.864Z,1520668804.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:00:05.262Z,1520668805.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:00:05.661Z,1520668805.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:00:06.070Z,1520668806.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:00:06.474Z,1520668806.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:00:06.870Z,1520668806.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:00:07.269Z,1520668807.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:00:07.667Z,1520668807.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:00:08.073Z,1520668808.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:00:08.469Z,1520668808.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:00:08.900Z,1520668808.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:00:09.272Z,1520668809.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:00:09.677Z,1520668809.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:00:10.068Z,1520668810.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:00:10.472Z,1520668810.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:00:10.873Z,1520668810.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:00:11.272Z,1520668811.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:00:11.673Z,1520668811.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:00:12.074Z,1520668812.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:00:12.481Z,1520668812.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:00:12.874Z,1520668812.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:00:13.272Z,1520668813.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:00:13.681Z,1520668813.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:00:14.103Z,1520668814.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:00:14.469Z,1520668814.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:00:14.881Z,1520668814.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:00:15.277Z,1520668815.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:00:15.677Z,1520668815.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:00:16.069Z,1520668816.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:00:16.471Z,1520668816.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:00:16.866Z,1520668816.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:00:17.265Z,1520668817.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:00:17.673Z,1520668817.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:00:18.074Z,1520668818.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:00:18.474Z,1520668818.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:00:18.878Z,1520668818.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:00:19.267Z,1520668819.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:00:19.665Z,1520668819.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:00:20.067Z,1520668820.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:00:20.469Z,1520668820.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:00:20.878Z,1520668820.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:00:21.277Z,1520668821.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:00:21.678Z,1520668821.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:00:22.065Z,1520668822.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:00:22.469Z,1520668822.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:00:22.869Z,1520668822.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:00:23.264Z,1520668823.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:00:23.677Z,1520668823.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:00:24.078Z,1520668824.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:00:24.478Z,1520668824.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:00:24.878Z,1520668824.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:00:25.273Z,1520668825.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:00:25.669Z,1520668825.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:00:26.079Z,1520668826.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:00:26.489Z,1520668826.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:00:27.021Z,1520668827.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:00:27.278Z,1520668827.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:00:27.679Z,1520668827.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:00:28.077Z,1520668828.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:00:28.470Z,1520668828.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:00:28.875Z,1520668828.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:00:29.258Z,1520668829.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:00:29.660Z,1520668829.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:00:30.078Z,1520668830.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:00:30.474Z,1520668830.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:00:30.877Z,1520668830.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:00:31.272Z,1520668831.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:00:31.660Z,1520668831.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:00:32.068Z,1520668832.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:00:32.464Z,1520668832.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:00:32.870Z,1520668832.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:00:33.274Z,1520668833.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:00:33.671Z,1520668833.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:00:36.778Z,1520668836.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:00:36.909Z,1520668836.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:00:37.302Z,1520668837.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:00:37.714Z,1520668837.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:00:38.120Z,1520668838.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:00:38.509Z,1520668838.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:00:38.905Z,1520668838.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:00:39.281Z,1520668839.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:00:39.683Z,1520668839.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:00:40.103Z,1520668840.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:00:40.502Z,1520668840.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:00:40.902Z,1520668840.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:00:41.281Z,1520668841.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:00:41.681Z,1520668841.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:00:42.079Z,1520668842.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:00:42.481Z,1520668842.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:00:42.906Z,1520668842.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:00:43.301Z,1520668843.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:00:43.681Z,1520668843.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:00:44.080Z,1520668844.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:00:44.481Z,1520668844.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:00:44.881Z,1520668844.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:00:45.274Z,1520668845.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:00:45.681Z,1520668845.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:00:46.103Z,1520668846.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:00:46.504Z,1520668846.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:00:46.905Z,1520668846.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:00:47.281Z,1520668847.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:00:47.681Z,1520668847.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:00:48.082Z,1520668848.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:00:48.481Z,1520668848.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:00:48.902Z,1520668848.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:00:49.306Z,1520668849.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:00:49.690Z,1520668849.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:00:50.077Z,1520668850.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:00:50.487Z,1520668850.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:00:50.928Z,1520668850.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:00:51.301Z,1520668851.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:00:51.683Z,1520668851.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:00:52.091Z,1520668852.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:00:52.493Z,1520668852.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:00:52.901Z,1520668852.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:00:53.285Z,1520668853.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:00:53.693Z,1520668853.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:00:54.085Z,1520668854.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:00:54.481Z,1520668854.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:00:54.890Z,1520668854.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:00:55.293Z,1520668855.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:00:55.700Z,1520668855.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:00:56.089Z,1520668856.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:00:56.479Z,1520668856.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:00:56.880Z,1520668856.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:00:57.281Z,1520668857.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:00:57.681Z,1520668857.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:00:58.091Z,1520668858.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:00:58.494Z,1520668858.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:00:58.893Z,1520668858.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:00:59.285Z,1520668859.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:00:59.683Z,1520668859.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:01:00.085Z,1520668860.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:01:00.493Z,1520668860.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:01:00.894Z,1520668860.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:01:01.301Z,1520668861.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:01:01.700Z,1520668861.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:01:02.084Z,1520668862.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:01:02.481Z,1520668862.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:01:02.890Z,1520668862.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:01:03.329Z,1520668863.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:01:03.705Z,1520668863.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:01:04.100Z,1520668864.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:01:04.493Z,1520668864.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:01:04.901Z,1520668864.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:01:05.286Z,1520668865.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:01:05.683Z,1520668865.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:01:06.081Z,1520668866.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:01:06.484Z,1520668866.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:01:06.890Z,1520668866.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:01:07.294Z,1520668867.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:01:07.694Z,1520668867.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:01:08.089Z,1520668868.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:01:08.481Z,1520668868.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:01:08.884Z,1520668868.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:01:09.283Z,1520668869.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:01:09.683Z,1520668869.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:01:10.100Z,1520668870.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:01:10.497Z,1520668870.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:01:10.894Z,1520668870.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:01:11.285Z,1520668871.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:01:11.681Z,1520668871.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:01:12.083Z,1520668872.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:01:12.489Z,1520668872.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:01:12.895Z,1520668872.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:01:13.294Z,1520668873.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:01:13.701Z,1520668873.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:01:14.085Z,1520668874.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:01:14.487Z,1520668874.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:01:14.886Z,1520668874.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:01:15.298Z,1520668875.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:01:15.717Z,1520668875.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:01:16.136Z,1520668876.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:01:16.499Z,1520668876.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:01:16.906Z,1520668876.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:01:17.294Z,1520668877.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:01:17.692Z,1520668877.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:01:18.093Z,1520668878.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:01:18.489Z,1520668878.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:01:18.909Z,1520668878.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:01:19.309Z,1520668879.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:01:19.700Z,1520668879.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:01:20.097Z,1520668880.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:01:20.476Z,1520668880.476 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:01:20.476Z,1520668880.476 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 55
2018-03-10T08:01:20.477Z,1520668880.477 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-03-10T08:01:20.478Z,1520668880.478 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:01:20.478Z,1520668880.478 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 55
2018-03-10T08:01:20.478Z,1520668880.478 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-03-10T08:01:20.500Z,1520668880.500 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:01:20.500Z,1520668880.500 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 55
2018-03-10T08:01:20.501Z,1520668880.501 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-10T08:01:20.529Z,1520668880.529 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-03-10T08:01:20.529Z,1520668880.529 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-03-10T08:01:20.529Z,1520668880.529 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-10T08:01:20.911Z,1520668880.911 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-03-10T08:01:20.911Z,1520668880.911 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 55
2018-03-10T08:01:20.912Z,1520668880.912 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-03-10T08:01:20.912Z,1520668880.912 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 55
2018-03-10T08:01:20.912Z,1520668880.912 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-10T08:01:20.912Z,1520668880.912 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 55
2018-03-10T08:01:21.276Z,1520668881.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-03-10T08:01:21.277Z,1520668881.277 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-03-10T08:01:21.277Z,1520668881.277 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-03-10T08:01:21.277Z,1520668881.277 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-03-10T08:01:21.278Z,1520668881.278 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-03-10T08:01:21.278Z,1520668881.278 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-03-10T08:01:21.278Z,1520668881.278 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-10T08:01:21.279Z,1520668881.279 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-10T08:01:21.279Z,1520668881.279 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-10T08:01:21.684Z,1520668881.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-03-10T08:01:21.685Z,1520668881.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:01:22.111Z,1520668882.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-03-10T08:01:22.112Z,1520668882.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:01:22.496Z,1520668882.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-03-10T08:01:22.497Z,1520668882.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:01:22.890Z,1520668882.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-03-10T08:01:22.890Z,1520668882.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:01:23.283Z,1520668883.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-03-10T08:01:23.284Z,1520668883.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:01:23.678Z,1520668883.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-03-10T08:01:23.679Z,1520668883.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:01:24.080Z,1520668884.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-03-10T08:01:24.081Z,1520668884.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:01:24.481Z,1520668884.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-03-10T08:01:24.482Z,1520668884.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:01:24.889Z,1520668884.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-03-10T08:01:24.890Z,1520668884.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:01:25.290Z,1520668885.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-03-10T08:01:25.291Z,1520668885.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:01:25.696Z,1520668885.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-03-10T08:01:25.697Z,1520668885.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:01:26.088Z,1520668886.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-03-10T08:01:26.089Z,1520668886.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:01:26.488Z,1520668886.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-03-10T08:01:26.489Z,1520668886.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:01:26.881Z,1520668886.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-03-10T08:01:26.881Z,1520668886.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:01:27.282Z,1520668887.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-03-10T08:01:27.283Z,1520668887.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:01:27.681Z,1520668887.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-03-10T08:01:27.681Z,1520668887.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:01:28.100Z,1520668888.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-03-10T08:01:28.101Z,1520668888.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:01:28.540Z,1520668888.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.1 s old, using for 20.0 s.
2018-03-10T08:01:28.541Z,1520668888.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:01:28.926Z,1520668888.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-03-10T08:01:28.927Z,1520668888.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:01:29.286Z,1520668889.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-03-10T08:01:29.287Z,1520668889.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:01:29.688Z,1520668889.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-03-10T08:01:29.689Z,1520668889.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:01:30.081Z,1520668890.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-03-10T08:01:30.082Z,1520668890.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:01:30.488Z,1520668890.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-03-10T08:01:30.489Z,1520668890.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:01:30.900Z,1520668890.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-03-10T08:01:30.901Z,1520668890.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:01:31.298Z,1520668891.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-03-10T08:01:31.299Z,1520668891.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:01:31.694Z,1520668891.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-03-10T08:01:31.695Z,1520668891.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:01:32.088Z,1520668892.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-03-10T08:01:32.089Z,1520668892.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:01:32.488Z,1520668892.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-03-10T08:01:32.489Z,1520668892.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:01:32.888Z,1520668892.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-03-10T08:01:32.889Z,1520668892.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:01:33.287Z,1520668893.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-03-10T08:01:33.288Z,1520668893.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:01:33.681Z,1520668893.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-03-10T08:01:33.682Z,1520668893.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:01:36.804Z,1520668896.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.3 s old, using for 20.0 s.
2018-03-10T08:01:36.805Z,1520668896.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:01:36.940Z,1520668896.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.5 s old, using for 20.0 s.
2018-03-10T08:01:36.941Z,1520668896.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:01:37.332Z,1520668897.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.9 s old, using for 20.0 s.
2018-03-10T08:01:37.332Z,1520668897.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:01:37.700Z,1520668897.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-03-10T08:01:37.701Z,1520668897.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:01:38.110Z,1520668898.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-03-10T08:01:38.111Z,1520668898.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:01:38.499Z,1520668898.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-03-10T08:01:38.500Z,1520668898.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:01:38.906Z,1520668898.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2018-03-10T08:01:38.907Z,1520668898.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:01:39.310Z,1520668899.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2018-03-10T08:01:39.311Z,1520668899.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:01:39.706Z,1520668899.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2018-03-10T08:01:39.707Z,1520668899.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:01:40.104Z,1520668900.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2018-03-10T08:01:40.105Z,1520668900.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:01:40.497Z,1520668900.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:01:40.907Z,1520668900.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:01:41.317Z,1520668901.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:01:41.721Z,1520668901.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:01:42.114Z,1520668902.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:01:42.465Z,1520668902.465 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-03-10T08:01:42.465Z,1520668902.465 [NAL9602] Data Fault, FailCount= 1
2018-03-10T08:01:42.465Z,1520668902.465 [NAL9602](ERROR): Data Fault
2018-03-10T08:01:42.515Z,1520668902.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:01:42.547Z,1520668902.547 [CBIT](ERROR): Data Fault in component: NAL9602
2018-03-10T08:01:42.858Z,1520668902.858 [NAL9602](INFO): Powering down
2018-03-10T08:01:42.907Z,1520668902.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:01:43.299Z,1520668903.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:01:43.697Z,1520668903.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:01:43.710Z,1520668903.710 [CBIT](INFO): Clearing failed state for component NAL9602
2018-03-10T08:01:43.710Z,1520668903.710 [NAL9602] No Fault, FailCount= 1
2018-03-10T08:01:44.103Z,1520668904.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:01:44.502Z,1520668904.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:01:44.899Z,1520668904.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:01:45.309Z,1520668905.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:01:45.699Z,1520668905.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:01:46.107Z,1520668906.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:01:46.509Z,1520668906.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:01:46.909Z,1520668906.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:01:47.303Z,1520668907.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:01:47.709Z,1520668907.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:01:48.098Z,1520668908.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:01:48.503Z,1520668908.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:01:48.902Z,1520668908.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:01:49.303Z,1520668909.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:01:49.708Z,1520668909.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:01:50.102Z,1520668910.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:01:50.503Z,1520668910.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:01:50.912Z,1520668910.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:01:51.305Z,1520668911.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:01:51.707Z,1520668911.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:01:52.107Z,1520668912.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:01:52.507Z,1520668912.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:01:52.905Z,1520668912.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:01:53.328Z,1520668913.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:01:53.729Z,1520668913.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:01:54.133Z,1520668914.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:01:54.512Z,1520668914.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:01:54.911Z,1520668914.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:01:55.311Z,1520668915.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:01:55.712Z,1520668915.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:01:56.111Z,1520668916.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:01:56.512Z,1520668916.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:01:56.912Z,1520668916.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:01:57.309Z,1520668917.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:01:57.715Z,1520668917.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:01:58.118Z,1520668918.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:01:58.514Z,1520668918.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:01:58.921Z,1520668918.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:01:59.297Z,1520668919.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:01:59.690Z,1520668919.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:02:00.121Z,1520668920.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:02:00.496Z,1520668920.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:02:00.898Z,1520668920.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:02:01.298Z,1520668921.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:02:01.696Z,1520668921.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:02:02.105Z,1520668922.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:02:02.500Z,1520668922.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:02:02.897Z,1520668922.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:02:03.301Z,1520668923.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:02:03.701Z,1520668923.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:02:04.096Z,1520668924.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:02:04.497Z,1520668924.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:02:04.901Z,1520668924.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:02:05.298Z,1520668925.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:02:05.707Z,1520668925.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:02:06.126Z,1520668926.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:02:06.509Z,1520668926.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:02:06.933Z,1520668926.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:02:07.305Z,1520668927.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:02:07.702Z,1520668927.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:02:08.104Z,1520668928.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:02:08.509Z,1520668928.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:02:08.900Z,1520668928.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:02:09.293Z,1520668929.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:02:09.699Z,1520668929.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:02:10.095Z,1520668930.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:02:10.497Z,1520668930.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:02:10.900Z,1520668930.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:02:11.305Z,1520668931.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:02:11.699Z,1520668931.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:02:12.141Z,1520668932.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:02:12.503Z,1520668932.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:02:12.906Z,1520668932.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:02:13.260Z,1520668933.260 [NAL9602](INFO): Powering up NAL9602
2018-03-10T08:02:13.310Z,1520668933.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:02:13.712Z,1520668933.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:02:14.113Z,1520668934.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:02:14.507Z,1520668934.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:02:14.919Z,1520668934.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:02:15.301Z,1520668935.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:02:15.709Z,1520668935.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:02:16.105Z,1520668936.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:02:16.503Z,1520668936.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:02:16.911Z,1520668936.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:02:17.311Z,1520668937.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:02:17.711Z,1520668937.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:02:18.111Z,1520668938.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:02:18.535Z,1520668938.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:02:18.957Z,1520668938.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:02:19.317Z,1520668939.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:02:19.713Z,1520668939.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:02:20.111Z,1520668940.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:02:20.494Z,1520668940.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:02:20.911Z,1520668940.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:02:21.295Z,1520668941.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:02:21.721Z,1520668941.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:02:22.099Z,1520668942.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:02:22.493Z,1520668942.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:02:22.896Z,1520668942.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:02:23.299Z,1520668943.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:02:23.722Z,1520668943.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:02:24.068Z,1520668944.068 [NAL9602](INFO): NAL9602 initialized
2018-03-10T08:02:24.100Z,1520668944.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:02:24.500Z,1520668944.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:02:24.906Z,1520668944.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:02:25.310Z,1520668945.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:02:25.700Z,1520668945.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:02:26.101Z,1520668946.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:02:26.499Z,1520668946.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:02:26.933Z,1520668946.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:02:27.314Z,1520668947.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:02:27.709Z,1520668947.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:02:28.105Z,1520668948.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:02:28.509Z,1520668948.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:02:28.909Z,1520668948.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:02:29.311Z,1520668949.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:02:29.709Z,1520668949.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:02:30.105Z,1520668950.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:02:30.504Z,1520668950.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:02:30.915Z,1520668950.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:02:31.337Z,1520668951.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:02:31.709Z,1520668951.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:02:32.102Z,1520668952.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:02:32.500Z,1520668952.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:02:32.910Z,1520668952.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:02:33.309Z,1520668953.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:02:33.717Z,1520668953.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:02:36.805Z,1520668956.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:02:36.940Z,1520668956.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:02:37.295Z,1520668957.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:02:37.700Z,1520668957.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:02:38.105Z,1520668958.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:02:38.491Z,1520668958.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:02:38.892Z,1520668958.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:02:39.294Z,1520668959.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:02:39.666Z,1520668959.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:02:40.100Z,1520668960.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:02:40.498Z,1520668960.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:02:40.905Z,1520668960.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:02:41.272Z,1520668961.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:02:41.677Z,1520668961.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:02:42.073Z,1520668962.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:02:42.472Z,1520668962.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:02:42.902Z,1520668962.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:02:43.302Z,1520668963.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:02:43.711Z,1520668963.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:02:44.108Z,1520668964.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:02:44.481Z,1520668964.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:02:44.901Z,1520668964.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:02:45.299Z,1520668965.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:02:45.701Z,1520668965.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:02:46.073Z,1520668966.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:02:46.470Z,1520668966.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:02:46.902Z,1520668966.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:02:47.302Z,1520668967.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:02:47.682Z,1520668967.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:02:48.081Z,1520668968.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:02:48.473Z,1520668968.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:02:48.904Z,1520668968.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:02:49.280Z,1520668969.280 [BPC1](ERROR): Failed to receive battery data
2018-03-10T08:02:49.280Z,1520668969.280 [BPC1] Communications Fault, FailCount= 1
2018-03-10T08:02:49.280Z,1520668969.280 [BPC1](ERROR): Communications Fault
2018-03-10T08:02:49.308Z,1520668969.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:02:49.336Z,1520668969.336 [CBIT](ERROR): Communications Fault in component: BPC1
2018-03-10T08:02:49.688Z,1520668969.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:02:50.070Z,1520668970.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:02:50.476Z,1520668970.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:02:50.489Z,1520668970.489 [CBIT](INFO): Clearing failed state for component BPC1
2018-03-10T08:02:50.489Z,1520668970.489 [BPC1] No Fault, FailCount= 1
2018-03-10T08:02:50.933Z,1520668970.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:02:51.282Z,1520668971.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:02:51.694Z,1520668971.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:02:52.081Z,1520668972.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:02:52.472Z,1520668972.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:02:52.885Z,1520668972.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:02:53.286Z,1520668973.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:02:53.685Z,1520668973.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:02:54.081Z,1520668974.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:02:54.476Z,1520668974.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:02:54.885Z,1520668974.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:02:55.287Z,1520668975.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:02:55.685Z,1520668975.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:02:56.121Z,1520668976.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:02:56.476Z,1520668976.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:02:56.898Z,1520668976.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:02:57.281Z,1520668977.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:02:57.685Z,1520668977.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:02:58.081Z,1520668978.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:02:58.474Z,1520668978.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:02:58.885Z,1520668978.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:02:59.286Z,1520668979.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:02:59.685Z,1520668979.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:03:00.081Z,1520668980.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:03:00.477Z,1520668980.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:03:00.893Z,1520668980.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:03:01.286Z,1520668981.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:03:01.687Z,1520668981.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:03:02.081Z,1520668982.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:03:02.481Z,1520668982.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:03:02.887Z,1520668982.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:03:03.281Z,1520668983.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:03:03.685Z,1520668983.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:03:04.081Z,1520668984.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:03:04.485Z,1520668984.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:03:04.886Z,1520668984.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:03:05.286Z,1520668985.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:03:05.693Z,1520668985.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:03:06.081Z,1520668986.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:03:06.477Z,1520668986.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:03:06.885Z,1520668986.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:03:07.286Z,1520668987.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:03:07.687Z,1520668987.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:03:08.081Z,1520668988.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:03:08.485Z,1520668988.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:03:08.898Z,1520668988.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:03:09.297Z,1520668989.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:03:09.690Z,1520668989.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:03:10.080Z,1520668990.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:03:10.481Z,1520668990.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:03:10.890Z,1520668990.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:03:11.290Z,1520668991.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:03:11.697Z,1520668991.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:03:12.083Z,1520668992.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:03:12.480Z,1520668992.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:03:12.923Z,1520668992.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:03:13.297Z,1520668993.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:03:13.691Z,1520668993.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:03:14.078Z,1520668994.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:03:14.481Z,1520668994.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:03:14.891Z,1520668994.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:03:15.297Z,1520668995.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:03:15.690Z,1520668995.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:03:16.082Z,1520668996.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:03:16.481Z,1520668996.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:03:16.886Z,1520668996.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:03:17.291Z,1520668997.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:03:17.690Z,1520668997.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:03:18.078Z,1520668998.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:03:18.480Z,1520668998.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:03:18.893Z,1520668998.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:03:19.290Z,1520668999.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:03:19.689Z,1520668999.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:03:20.078Z,1520669000.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:03:20.477Z,1520669000.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:03:20.890Z,1520669000.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:03:21.282Z,1520669001.282 [BPC1](FAULT): Failed to initialize
2018-03-10T08:03:21.283Z,1520669001.283 [BPC1] Communications Fault, FailCount= 2
2018-03-10T08:03:21.283Z,1520669001.283 [BPC1](ERROR): Communications Fault
2018-03-10T08:03:21.290Z,1520669001.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:03:21.328Z,1520669001.328 [CBIT](ERROR): Communications Fault in component: BPC1
2018-03-10T08:03:21.687Z,1520669001.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:03:22.090Z,1520669002.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:03:22.489Z,1520669002.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:03:22.502Z,1520669002.502 [CBIT](INFO): Clearing failed state for component BPC1
2018-03-10T08:03:22.502Z,1520669002.502 [BPC1] No Fault, FailCount= 2
2018-03-10T08:03:22.941Z,1520669002.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:03:23.294Z,1520669003.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:03:23.690Z,1520669003.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:03:24.089Z,1520669004.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:03:24.482Z,1520669004.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:03:24.887Z,1520669004.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:03:25.291Z,1520669005.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:03:25.690Z,1520669005.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:03:26.083Z,1520669006.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:03:26.485Z,1520669006.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:03:26.899Z,1520669006.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:03:27.294Z,1520669007.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:03:27.693Z,1520669007.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:03:28.090Z,1520669008.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:03:28.487Z,1520669008.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:03:28.889Z,1520669008.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:03:29.291Z,1520669009.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:03:29.691Z,1520669009.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:03:30.085Z,1520669010.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:03:30.495Z,1520669010.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:03:30.890Z,1520669010.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:03:31.297Z,1520669011.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:03:31.692Z,1520669011.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:03:32.089Z,1520669012.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:03:32.471Z,1520669012.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:03:32.902Z,1520669012.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:03:33.298Z,1520669013.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:03:33.695Z,1520669013.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:03:34.073Z,1520669014.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:03:37.167Z,1520669017.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:03:37.325Z,1520669017.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:03:37.669Z,1520669017.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:03:38.070Z,1520669018.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:03:38.461Z,1520669018.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:03:38.861Z,1520669018.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:03:39.263Z,1520669019.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:03:39.658Z,1520669019.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:03:40.062Z,1520669020.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:03:40.470Z,1520669020.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:03:40.869Z,1520669020.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:03:41.261Z,1520669021.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:03:41.662Z,1520669021.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:03:42.059Z,1520669022.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:03:42.454Z,1520669022.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:03:42.862Z,1520669022.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:03:43.273Z,1520669023.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:03:43.669Z,1520669023.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:03:44.081Z,1520669024.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:03:44.460Z,1520669024.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:03:44.860Z,1520669024.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:03:45.262Z,1520669025.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:03:45.664Z,1520669025.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:03:46.067Z,1520669026.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:03:46.492Z,1520669026.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:03:46.889Z,1520669026.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:03:47.312Z,1520669027.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:03:47.699Z,1520669027.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:03:48.068Z,1520669028.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:03:48.492Z,1520669028.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:03:48.873Z,1520669028.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:03:49.293Z,1520669029.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:03:49.701Z,1520669029.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:03:50.070Z,1520669030.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:03:50.469Z,1520669030.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:03:50.866Z,1520669030.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:03:51.270Z,1520669031.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:03:51.677Z,1520669031.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:03:52.071Z,1520669032.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:03:52.465Z,1520669032.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:03:52.865Z,1520669032.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:03:53.252Z,1520669033.252 [BPC1](FAULT): Failed to initialize
2018-03-10T08:03:53.252Z,1520669033.252 [BPC1] Communications Fault, FailCount= 3
2018-03-10T08:03:53.252Z,1520669033.252 [BPC1](ERROR): Communications Fault
2018-03-10T08:03:53.260Z,1520669033.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:03:53.273Z,1520669033.273 [CBIT](ERROR): Communications Fault in component: BPC1
2018-03-10T08:03:53.662Z,1520669033.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:03:54.067Z,1520669034.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:03:54.481Z,1520669034.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:03:54.506Z,1520669034.506 [CBIT](INFO): Clearing failed state for component BPC1
2018-03-10T08:03:54.506Z,1520669034.506 [BPC1] No Fault, FailCount= 3
2018-03-10T08:03:54.925Z,1520669034.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:03:55.269Z,1520669035.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:03:55.668Z,1520669035.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:03:56.063Z,1520669036.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:03:56.458Z,1520669036.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:03:56.859Z,1520669036.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:03:57.265Z,1520669037.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:03:57.670Z,1520669037.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:03:58.066Z,1520669038.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:03:58.462Z,1520669038.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:03:58.861Z,1520669038.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:03:59.263Z,1520669039.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:03:59.662Z,1520669039.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:04:00.070Z,1520669040.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:04:00.469Z,1520669040.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:04:00.871Z,1520669040.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:04:01.264Z,1520669041.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:04:01.664Z,1520669041.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:04:02.062Z,1520669042.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:04:02.464Z,1520669042.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:04:02.864Z,1520669042.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:04:03.266Z,1520669043.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:04:03.674Z,1520669043.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:04:04.071Z,1520669044.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:04:04.442Z,1520669044.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:04:04.873Z,1520669044.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:04:05.254Z,1520669045.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:04:05.649Z,1520669045.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:04:06.077Z,1520669046.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:04:06.478Z,1520669046.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:04:06.878Z,1520669046.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:04:07.254Z,1520669047.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:04:07.647Z,1520669047.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:04:08.080Z,1520669048.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:04:08.536Z,1520669048.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:04:08.855Z,1520669048.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:04:09.258Z,1520669049.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:04:09.681Z,1520669049.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:04:10.085Z,1520669050.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:04:10.449Z,1520669050.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:04:10.861Z,1520669050.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:04:11.257Z,1520669051.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:04:11.653Z,1520669051.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:04:12.083Z,1520669052.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:04:12.485Z,1520669052.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:04:12.859Z,1520669052.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:04:13.257Z,1520669053.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:04:13.656Z,1520669053.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:04:14.061Z,1520669054.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:04:14.457Z,1520669054.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:04:14.857Z,1520669054.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:04:15.259Z,1520669055.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:04:15.670Z,1520669055.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:04:16.068Z,1520669056.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:04:16.450Z,1520669056.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:04:16.861Z,1520669056.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:04:17.259Z,1520669057.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:04:17.660Z,1520669057.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:04:18.061Z,1520669058.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:04:18.466Z,1520669058.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:04:18.863Z,1520669058.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:04:19.256Z,1520669059.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:04:19.659Z,1520669059.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:04:20.056Z,1520669060.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:04:20.458Z,1520669060.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:04:20.851Z,1520669060.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:04:21.263Z,1520669061.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:04:21.666Z,1520669061.666 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:04:21.667Z,1520669061.667 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 56
2018-03-10T08:04:21.667Z,1520669061.667 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-03-10T08:04:21.669Z,1520669061.669 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:04:21.669Z,1520669061.669 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 56
2018-03-10T08:04:21.669Z,1520669061.669 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-03-10T08:04:21.670Z,1520669061.670 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:04:21.670Z,1520669061.670 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 56
2018-03-10T08:04:21.671Z,1520669061.671 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-10T08:04:21.711Z,1520669061.711 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-03-10T08:04:21.711Z,1520669061.711 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-03-10T08:04:21.711Z,1520669061.711 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-10T08:04:22.083Z,1520669062.083 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-03-10T08:04:22.083Z,1520669062.083 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 56
2018-03-10T08:04:22.084Z,1520669062.084 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-03-10T08:04:22.084Z,1520669062.084 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 56
2018-03-10T08:04:22.084Z,1520669062.084 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-10T08:04:22.084Z,1520669062.084 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 56
2018-03-10T08:04:22.454Z,1520669062.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-03-10T08:04:22.455Z,1520669062.455 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-03-10T08:04:22.456Z,1520669062.456 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-03-10T08:04:22.456Z,1520669062.456 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-03-10T08:04:22.456Z,1520669062.456 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-03-10T08:04:22.457Z,1520669062.457 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-03-10T08:04:22.457Z,1520669062.457 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-10T08:04:22.457Z,1520669062.457 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-10T08:04:22.458Z,1520669062.458 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-10T08:04:22.866Z,1520669062.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-03-10T08:04:22.867Z,1520669062.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:04:23.263Z,1520669063.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-03-10T08:04:23.264Z,1520669063.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:04:23.663Z,1520669063.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-03-10T08:04:23.664Z,1520669063.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:04:24.072Z,1520669064.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-03-10T08:04:24.073Z,1520669064.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:04:24.470Z,1520669064.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-03-10T08:04:24.471Z,1520669064.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:04:24.871Z,1520669064.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-03-10T08:04:24.872Z,1520669064.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:04:25.259Z,1520669065.259 [BPC1](FAULT): Failed to initialize
2018-03-10T08:04:25.260Z,1520669065.260 [BPC1] Communications Fault, FailCount= 4
2018-03-10T08:04:25.260Z,1520669065.260 [BPC1](ERROR): Communications Fault
2018-03-10T08:04:25.272Z,1520669065.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-03-10T08:04:25.273Z,1520669065.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:04:25.286Z,1520669065.286 [CBIT](ERROR): Communications Fault in component: BPC1
2018-03-10T08:04:25.667Z,1520669065.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-03-10T08:04:25.668Z,1520669065.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:04:26.042Z,1520669066.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-03-10T08:04:26.051Z,1520669066.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:04:26.466Z,1520669066.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-03-10T08:04:26.468Z,1520669066.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:04:26.480Z,1520669066.480 [CBIT](INFO): Clearing failed state for component BPC1
2018-03-10T08:04:26.480Z,1520669066.480 [BPC1] No Fault, FailCount= 4
2018-03-10T08:04:26.917Z,1520669066.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.3 s old, using for 20.0 s.
2018-03-10T08:04:26.918Z,1520669066.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:04:27.270Z,1520669067.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-03-10T08:04:27.271Z,1520669067.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:04:27.673Z,1520669067.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-03-10T08:04:27.674Z,1520669067.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:04:28.065Z,1520669068.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-03-10T08:04:28.066Z,1520669068.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:04:28.446Z,1520669068.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-03-10T08:04:28.456Z,1520669068.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:04:28.872Z,1520669068.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-03-10T08:04:28.873Z,1520669068.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:04:29.273Z,1520669069.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-03-10T08:04:29.274Z,1520669069.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:04:29.645Z,1520669069.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-03-10T08:04:29.646Z,1520669069.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:04:30.077Z,1520669070.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-03-10T08:04:30.078Z,1520669070.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:04:30.476Z,1520669070.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-03-10T08:04:30.477Z,1520669070.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:04:30.877Z,1520669070.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-03-10T08:04:30.878Z,1520669070.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:04:31.276Z,1520669071.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-03-10T08:04:31.277Z,1520669071.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:04:31.651Z,1520669071.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-03-10T08:04:31.652Z,1520669071.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:04:32.048Z,1520669072.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-03-10T08:04:32.049Z,1520669072.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:04:32.480Z,1520669072.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-03-10T08:04:32.481Z,1520669072.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:04:32.852Z,1520669072.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-03-10T08:04:32.853Z,1520669072.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:04:33.255Z,1520669073.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-03-10T08:04:33.256Z,1520669073.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:04:33.679Z,1520669073.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-03-10T08:04:33.680Z,1520669073.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:04:33.683Z,1520669073.683 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-03-10T08:04:33.683Z,1520669073.683 [Default:CheckIn:C.Wait] Stopped
2018-03-10T08:04:33.683Z,1520669073.683 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-03-10T08:04:33.683Z,1520669073.683 [Default:CheckIn:D] Running Loop=1
2018-03-10T08:04:34.081Z,1520669074.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-03-10T08:04:34.082Z,1520669074.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:04:34.085Z,1520669074.085 [Default:CheckIn:D] Stopped
2018-03-10T08:04:34.085Z,1520669074.085 [Default:CheckIn:E] Running Loop=1
2018-03-10T08:04:34.451Z,1520669074.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-03-10T08:04:34.452Z,1520669074.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:04:34.456Z,1520669074.456 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 165.269401 min 
2018-03-10T08:04:34.456Z,1520669074.456 [Default:CheckIn:E] Stopped
2018-03-10T08:04:34.456Z,1520669074.456 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-03-10T08:04:34.456Z,1520669074.456 [Default:CheckIn] Stopped
2018-03-10T08:04:34.456Z,1520669074.456 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-03-10T08:04:34.456Z,1520669074.456 [Default:CheckIn](INFO): Running loop #17
2018-03-10T08:04:34.456Z,1520669074.456 [Default:CheckIn] Running Loop=17
2018-03-10T08:04:34.456Z,1520669074.456 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-03-10T08:04:34.457Z,1520669074.457 [Default:CheckIn:Read_GPS] Running Loop=1
2018-03-10T08:04:37.564Z,1520669077.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.9 s old, using for 20.0 s.
2018-03-10T08:04:37.565Z,1520669077.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:04:37.708Z,1520669077.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-03-10T08:04:37.709Z,1520669077.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:04:38.092Z,1520669078.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-03-10T08:04:38.093Z,1520669078.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:04:38.466Z,1520669078.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-03-10T08:04:38.467Z,1520669078.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:04:38.893Z,1520669078.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-03-10T08:04:38.894Z,1520669078.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:04:39.289Z,1520669079.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-03-10T08:04:39.290Z,1520669079.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:04:39.688Z,1520669079.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-03-10T08:04:39.689Z,1520669079.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:04:40.069Z,1520669080.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2018-03-10T08:04:40.070Z,1520669080.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:04:40.468Z,1520669080.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2018-03-10T08:04:40.469Z,1520669080.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:04:40.914Z,1520669080.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2018-03-10T08:04:40.916Z,1520669080.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:04:41.290Z,1520669081.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2018-03-10T08:04:41.291Z,1520669081.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:04:41.692Z,1520669081.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:04:42.065Z,1520669082.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:04:42.469Z,1520669082.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:04:42.865Z,1520669082.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:04:43.267Z,1520669083.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:04:43.689Z,1520669083.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:04:44.089Z,1520669084.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:04:44.469Z,1520669084.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:04:44.866Z,1520669084.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:04:45.264Z,1520669085.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:04:45.694Z,1520669085.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:04:46.087Z,1520669086.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:04:46.495Z,1520669086.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:04:46.866Z,1520669086.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:04:47.263Z,1520669087.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:04:47.670Z,1520669087.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:04:48.104Z,1520669088.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:04:48.468Z,1520669088.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:04:48.877Z,1520669088.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:04:49.296Z,1520669089.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:04:49.695Z,1520669089.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:04:50.077Z,1520669090.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:04:50.481Z,1520669090.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:04:50.869Z,1520669090.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:04:51.266Z,1520669091.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:04:51.677Z,1520669091.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:04:52.079Z,1520669092.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:04:52.488Z,1520669092.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:04:52.879Z,1520669092.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:04:53.276Z,1520669093.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:04:53.681Z,1520669093.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:04:54.073Z,1520669094.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:04:54.480Z,1520669094.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:04:54.888Z,1520669094.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:04:55.289Z,1520669095.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:04:55.689Z,1520669095.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:04:56.077Z,1520669096.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:04:56.477Z,1520669096.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:04:56.883Z,1520669096.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:04:57.293Z,1520669097.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:04:57.689Z,1520669097.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:04:58.075Z,1520669098.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:04:58.470Z,1520669098.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:04:58.885Z,1520669098.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:04:59.286Z,1520669099.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:04:59.689Z,1520669099.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:05:00.077Z,1520669100.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:05:00.476Z,1520669100.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:05:00.909Z,1520669100.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:05:01.287Z,1520669101.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:05:01.689Z,1520669101.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:05:02.070Z,1520669102.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:05:02.476Z,1520669102.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:05:02.879Z,1520669102.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:05:03.290Z,1520669103.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:05:03.689Z,1520669103.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:05:04.077Z,1520669104.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:05:04.477Z,1520669104.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:05:04.897Z,1520669104.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:05:05.286Z,1520669105.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:05:05.689Z,1520669105.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:05:06.078Z,1520669106.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:05:06.471Z,1520669106.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:05:06.889Z,1520669106.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:05:07.282Z,1520669107.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:05:07.684Z,1520669107.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:05:08.075Z,1520669108.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:05:08.477Z,1520669108.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:05:08.886Z,1520669108.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:05:09.286Z,1520669109.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:05:09.686Z,1520669109.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:05:10.081Z,1520669110.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:05:10.482Z,1520669110.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:05:10.880Z,1520669110.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:05:11.289Z,1520669111.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:05:11.698Z,1520669111.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:05:12.080Z,1520669112.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:05:12.472Z,1520669112.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:05:12.893Z,1520669112.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:05:13.293Z,1520669113.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:05:13.690Z,1520669113.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:05:14.061Z,1520669114.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:05:14.489Z,1520669114.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:05:14.887Z,1520669114.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:05:15.287Z,1520669115.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:05:15.688Z,1520669115.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:05:16.090Z,1520669116.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:05:16.501Z,1520669116.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:05:16.883Z,1520669116.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:05:17.296Z,1520669117.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:05:17.678Z,1520669117.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:05:18.077Z,1520669118.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:05:18.469Z,1520669118.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:05:18.900Z,1520669118.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:05:19.301Z,1520669119.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:05:19.681Z,1520669119.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:05:20.077Z,1520669120.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:05:20.472Z,1520669120.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:05:20.873Z,1520669120.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:05:21.279Z,1520669121.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:05:21.675Z,1520669121.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:05:22.068Z,1520669122.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:05:22.473Z,1520669122.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:05:22.875Z,1520669122.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:05:23.278Z,1520669123.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:05:23.685Z,1520669123.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:05:24.074Z,1520669124.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:05:24.472Z,1520669124.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:05:24.878Z,1520669124.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:05:25.286Z,1520669125.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:05:25.711Z,1520669125.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:05:26.073Z,1520669126.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:05:26.477Z,1520669126.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:05:26.881Z,1520669126.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:05:27.290Z,1520669127.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:05:27.327Z,1520669127.327 [CBIT](DEBUG): EFC running - data check-sum false
2018-03-10T08:05:27.693Z,1520669127.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:05:28.093Z,1520669128.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:05:28.473Z,1520669128.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:05:28.886Z,1520669128.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:05:29.286Z,1520669129.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:05:29.689Z,1520669129.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:05:30.077Z,1520669130.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:05:30.472Z,1520669130.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:05:30.889Z,1520669130.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:05:31.286Z,1520669131.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:05:31.683Z,1520669131.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:05:32.080Z,1520669132.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:05:32.476Z,1520669132.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:05:32.881Z,1520669132.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:05:33.289Z,1520669133.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:05:33.685Z,1520669133.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:05:34.075Z,1520669134.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:05:34.476Z,1520669134.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:05:37.624Z,1520669137.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:05:37.771Z,1520669137.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:05:38.136Z,1520669138.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:05:38.540Z,1520669138.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:05:38.905Z,1520669138.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:05:39.305Z,1520669139.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:05:39.710Z,1520669139.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:05:40.133Z,1520669140.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:05:40.541Z,1520669140.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:05:40.912Z,1520669140.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:05:41.313Z,1520669141.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:05:41.717Z,1520669141.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:05:42.109Z,1520669142.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:05:42.509Z,1520669142.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:05:42.938Z,1520669142.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:05:43.317Z,1520669143.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:05:43.736Z,1520669143.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:05:44.116Z,1520669144.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:05:44.510Z,1520669144.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:05:44.940Z,1520669144.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:05:45.336Z,1520669145.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:05:45.714Z,1520669145.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:05:46.116Z,1520669146.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:05:46.517Z,1520669146.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:05:46.919Z,1520669146.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:05:47.322Z,1520669147.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:05:47.733Z,1520669147.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:05:48.112Z,1520669148.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:05:48.517Z,1520669148.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:05:48.937Z,1520669148.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:05:49.324Z,1520669149.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:05:49.727Z,1520669149.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:05:50.128Z,1520669150.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:05:50.519Z,1520669150.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:05:50.941Z,1520669150.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:05:51.357Z,1520669151.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:05:51.733Z,1520669151.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:05:52.126Z,1520669152.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:05:52.509Z,1520669152.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:05:52.935Z,1520669152.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:05:53.333Z,1520669153.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:05:53.734Z,1520669153.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:05:54.110Z,1520669154.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:05:54.508Z,1520669154.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:05:54.935Z,1520669154.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:05:55.317Z,1520669155.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:05:55.744Z,1520669155.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:05:56.113Z,1520669156.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:05:56.509Z,1520669156.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:05:56.914Z,1520669156.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:05:57.314Z,1520669157.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:05:57.806Z,1520669157.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:05:58.108Z,1520669158.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:05:58.512Z,1520669158.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:05:58.911Z,1520669158.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:05:59.310Z,1520669159.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:05:59.740Z,1520669159.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:06:00.110Z,1520669160.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:06:00.507Z,1520669160.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:06:00.941Z,1520669160.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:06:01.315Z,1520669161.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:06:01.739Z,1520669161.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:06:02.116Z,1520669162.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:06:02.544Z,1520669162.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:06:02.913Z,1520669162.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:06:03.320Z,1520669163.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:06:03.721Z,1520669163.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:06:04.119Z,1520669164.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:06:04.521Z,1520669164.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:06:04.918Z,1520669164.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:06:05.318Z,1520669165.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:06:05.724Z,1520669165.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:06:06.113Z,1520669166.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:06:06.512Z,1520669166.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:06:06.919Z,1520669166.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:06:07.318Z,1520669167.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:06:07.714Z,1520669167.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:06:08.113Z,1520669168.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:06:08.517Z,1520669168.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:06:08.918Z,1520669168.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:06:09.324Z,1520669169.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:06:09.718Z,1520669169.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:06:10.112Z,1520669170.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:06:10.509Z,1520669170.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:06:10.926Z,1520669170.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:06:11.318Z,1520669171.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:06:11.724Z,1520669171.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:06:12.111Z,1520669172.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:06:12.504Z,1520669172.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:06:12.918Z,1520669172.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:06:13.329Z,1520669173.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:06:13.749Z,1520669173.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:06:14.111Z,1520669174.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:06:14.510Z,1520669174.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:06:14.917Z,1520669174.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:06:15.328Z,1520669175.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:06:15.722Z,1520669175.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:06:16.113Z,1520669176.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:06:16.508Z,1520669176.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:06:16.929Z,1520669176.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:06:17.337Z,1520669177.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:06:17.732Z,1520669177.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:06:18.121Z,1520669178.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:06:18.517Z,1520669178.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:06:18.922Z,1520669178.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:06:19.327Z,1520669179.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:06:19.718Z,1520669179.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:06:20.119Z,1520669180.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:06:20.520Z,1520669180.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:06:20.923Z,1520669180.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:06:21.329Z,1520669181.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:06:21.723Z,1520669181.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:06:22.113Z,1520669182.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:06:22.526Z,1520669182.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:06:22.926Z,1520669182.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:06:23.333Z,1520669183.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:06:23.733Z,1520669183.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:06:24.125Z,1520669184.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:06:24.523Z,1520669184.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:06:24.930Z,1520669184.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:06:25.349Z,1520669185.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:06:25.729Z,1520669185.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:06:26.123Z,1520669186.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:06:26.521Z,1520669186.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:06:26.924Z,1520669186.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:06:27.337Z,1520669187.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:06:27.726Z,1520669187.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:06:28.125Z,1520669188.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:06:28.533Z,1520669188.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:06:28.926Z,1520669188.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:06:29.337Z,1520669189.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:06:29.740Z,1520669189.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:06:30.136Z,1520669190.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:06:30.506Z,1520669190.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:06:30.929Z,1520669190.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:06:31.331Z,1520669191.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:06:31.726Z,1520669191.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:06:32.107Z,1520669192.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:06:32.509Z,1520669192.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:06:32.930Z,1520669192.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:06:33.332Z,1520669193.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:06:33.730Z,1520669193.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:06:34.108Z,1520669194.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:06:34.513Z,1520669194.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:06:37.637Z,1520669197.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:06:37.797Z,1520669197.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:06:38.134Z,1520669198.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:06:38.509Z,1520669198.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:06:38.917Z,1520669198.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:06:39.317Z,1520669199.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:06:39.710Z,1520669199.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:06:40.120Z,1520669200.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:06:40.526Z,1520669200.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:06:40.957Z,1520669200.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:06:41.309Z,1520669201.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:06:41.709Z,1520669201.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:06:42.140Z,1520669202.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:06:42.541Z,1520669202.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:06:42.938Z,1520669202.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:06:43.329Z,1520669203.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:06:43.726Z,1520669203.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:06:44.125Z,1520669204.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:06:44.501Z,1520669204.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:06:44.930Z,1520669204.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:06:45.330Z,1520669205.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:06:45.740Z,1520669205.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:06:46.109Z,1520669206.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:06:46.505Z,1520669206.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:06:46.936Z,1520669206.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:06:47.334Z,1520669207.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:06:47.731Z,1520669207.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:06:48.105Z,1520669208.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:06:48.511Z,1520669208.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:06:48.941Z,1520669208.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:06:49.338Z,1520669209.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:06:49.737Z,1520669209.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:06:50.113Z,1520669210.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:06:50.505Z,1520669210.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:06:50.931Z,1520669210.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:06:51.337Z,1520669211.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:06:51.710Z,1520669211.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:06:52.109Z,1520669212.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:06:52.509Z,1520669212.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:06:52.938Z,1520669212.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:06:53.336Z,1520669213.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:06:53.711Z,1520669213.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:06:54.106Z,1520669214.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:06:54.507Z,1520669214.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:06:54.946Z,1520669214.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:06:55.338Z,1520669215.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:06:55.713Z,1520669215.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:06:56.117Z,1520669216.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:06:56.510Z,1520669216.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:06:56.915Z,1520669216.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:06:57.314Z,1520669217.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:06:57.714Z,1520669217.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:06:58.117Z,1520669218.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:06:58.511Z,1520669218.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:06:58.915Z,1520669218.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:06:59.319Z,1520669219.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:06:59.721Z,1520669219.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:07:00.125Z,1520669220.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:07:00.521Z,1520669220.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:07:00.945Z,1520669220.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:07:01.317Z,1520669221.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:07:01.718Z,1520669221.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:07:02.109Z,1520669222.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:07:02.512Z,1520669222.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:07:02.917Z,1520669222.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:07:03.321Z,1520669223.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:07:03.721Z,1520669223.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:07:04.110Z,1520669224.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:07:04.512Z,1520669224.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:07:04.920Z,1520669224.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:07:05.329Z,1520669225.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:07:05.729Z,1520669225.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:07:06.115Z,1520669226.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:07:06.520Z,1520669226.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:07:06.922Z,1520669226.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:07:07.324Z,1520669227.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:07:07.723Z,1520669227.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:07:08.114Z,1520669228.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:07:08.513Z,1520669228.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:07:08.923Z,1520669228.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:07:09.323Z,1520669229.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:07:09.734Z,1520669229.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:07:10.113Z,1520669230.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:07:10.514Z,1520669230.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:07:10.931Z,1520669230.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:07:11.354Z,1520669231.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:07:11.725Z,1520669231.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:07:12.125Z,1520669232.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:07:12.517Z,1520669232.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:07:12.933Z,1520669232.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:07:13.329Z,1520669233.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:07:13.722Z,1520669233.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:07:14.111Z,1520669234.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:07:14.512Z,1520669234.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:07:14.922Z,1520669234.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:07:15.322Z,1520669235.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:07:15.722Z,1520669235.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:07:16.111Z,1520669236.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:07:16.517Z,1520669236.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:07:16.923Z,1520669236.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:07:17.320Z,1520669237.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:07:17.718Z,1520669237.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:07:18.117Z,1520669238.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:07:18.510Z,1520669238.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:07:18.928Z,1520669238.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:07:19.322Z,1520669239.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:07:19.729Z,1520669239.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:07:20.115Z,1520669240.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:07:20.511Z,1520669240.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:07:20.927Z,1520669240.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:07:21.334Z,1520669241.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:07:21.773Z,1520669241.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:07:22.141Z,1520669242.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:07:22.514Z,1520669242.514 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:07:22.514Z,1520669242.514 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 57
2018-03-10T08:07:22.514Z,1520669242.514 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-03-10T08:07:22.516Z,1520669242.516 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:07:22.516Z,1520669242.516 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 57
2018-03-10T08:07:22.516Z,1520669242.516 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-03-10T08:07:22.518Z,1520669242.518 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:07:22.518Z,1520669242.518 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 57
2018-03-10T08:07:22.518Z,1520669242.518 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-10T08:07:22.530Z,1520669242.530 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-03-10T08:07:22.530Z,1520669242.530 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-03-10T08:07:22.530Z,1520669242.530 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-10T08:07:22.934Z,1520669242.934 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-03-10T08:07:22.934Z,1520669242.934 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 57
2018-03-10T08:07:22.935Z,1520669242.935 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-03-10T08:07:22.935Z,1520669242.935 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 57
2018-03-10T08:07:22.935Z,1520669242.935 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-10T08:07:22.935Z,1520669242.935 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 57
2018-03-10T08:07:23.326Z,1520669243.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-03-10T08:07:23.326Z,1520669243.326 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-03-10T08:07:23.327Z,1520669243.327 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-03-10T08:07:23.327Z,1520669243.327 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-03-10T08:07:23.328Z,1520669243.328 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-03-10T08:07:23.328Z,1520669243.328 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-03-10T08:07:23.328Z,1520669243.328 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-10T08:07:23.329Z,1520669243.329 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-10T08:07:23.329Z,1520669243.329 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-10T08:07:23.716Z,1520669243.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-03-10T08:07:23.717Z,1520669243.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:07:24.120Z,1520669244.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-03-10T08:07:24.121Z,1520669244.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:07:24.528Z,1520669244.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-03-10T08:07:24.529Z,1520669244.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:07:24.928Z,1520669244.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-03-10T08:07:24.929Z,1520669244.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:07:25.321Z,1520669245.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-03-10T08:07:25.322Z,1520669245.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:07:25.715Z,1520669245.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-03-10T08:07:25.716Z,1520669245.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:07:26.115Z,1520669246.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-03-10T08:07:26.116Z,1520669246.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:07:26.526Z,1520669246.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-03-10T08:07:26.526Z,1520669246.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:07:26.929Z,1520669246.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-03-10T08:07:26.930Z,1520669246.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:07:27.323Z,1520669247.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-03-10T08:07:27.324Z,1520669247.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:07:27.723Z,1520669247.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-03-10T08:07:27.723Z,1520669247.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:07:28.114Z,1520669248.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-03-10T08:07:28.116Z,1520669248.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:07:28.514Z,1520669248.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-03-10T08:07:28.515Z,1520669248.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:07:28.922Z,1520669248.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-03-10T08:07:28.923Z,1520669248.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:07:29.321Z,1520669249.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-03-10T08:07:29.322Z,1520669249.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:07:29.721Z,1520669249.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-03-10T08:07:29.722Z,1520669249.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:07:30.120Z,1520669250.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-03-10T08:07:30.121Z,1520669250.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:07:30.513Z,1520669250.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-03-10T08:07:30.514Z,1520669250.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:07:30.921Z,1520669250.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-03-10T08:07:30.922Z,1520669250.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:07:31.323Z,1520669251.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-03-10T08:07:31.324Z,1520669251.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:07:31.729Z,1520669251.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-03-10T08:07:31.730Z,1520669251.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:07:32.114Z,1520669252.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-03-10T08:07:32.116Z,1520669252.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:07:32.520Z,1520669252.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-03-10T08:07:32.521Z,1520669252.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:07:32.928Z,1520669252.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-03-10T08:07:32.929Z,1520669252.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:07:33.322Z,1520669253.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-03-10T08:07:33.323Z,1520669253.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:07:33.736Z,1520669253.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-03-10T08:07:33.737Z,1520669253.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:07:34.128Z,1520669254.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-03-10T08:07:34.129Z,1520669254.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:07:34.521Z,1520669254.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-03-10T08:07:34.522Z,1520669254.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:07:34.928Z,1520669254.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-03-10T08:07:34.929Z,1520669254.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:07:38.020Z,1520669258.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.5 s old, using for 20.0 s.
2018-03-10T08:07:38.021Z,1520669258.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:07:38.184Z,1520669258.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.7 s old, using for 20.0 s.
2018-03-10T08:07:38.185Z,1520669258.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:07:38.497Z,1520669258.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-03-10T08:07:38.498Z,1520669258.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:07:38.896Z,1520669258.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-03-10T08:07:38.897Z,1520669258.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:07:39.294Z,1520669259.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-03-10T08:07:39.296Z,1520669259.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:07:39.693Z,1520669259.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-03-10T08:07:39.694Z,1520669259.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:07:40.121Z,1520669260.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-03-10T08:07:40.121Z,1520669260.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:07:40.498Z,1520669260.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-03-10T08:07:40.499Z,1520669260.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:07:40.898Z,1520669260.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2018-03-10T08:07:40.899Z,1520669260.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:07:41.294Z,1520669261.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2018-03-10T08:07:41.295Z,1520669261.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:07:41.691Z,1520669261.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2018-03-10T08:07:41.692Z,1520669261.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:07:42.098Z,1520669262.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2018-03-10T08:07:42.104Z,1520669262.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:07:42.496Z,1520669262.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 20.0 s old, using for 20.0 s.
2018-03-10T08:07:42.497Z,1520669262.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:07:42.899Z,1520669262.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:07:43.298Z,1520669263.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:07:43.705Z,1520669263.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:07:44.101Z,1520669264.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:07:44.504Z,1520669264.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:07:44.910Z,1520669264.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:07:45.302Z,1520669265.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:07:45.703Z,1520669265.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:07:46.100Z,1520669266.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:07:46.497Z,1520669266.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:07:46.903Z,1520669266.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:07:47.304Z,1520669267.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:07:47.702Z,1520669267.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:07:48.094Z,1520669268.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:07:48.501Z,1520669268.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:07:48.902Z,1520669268.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:07:49.302Z,1520669269.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:07:49.702Z,1520669269.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:07:50.088Z,1520669270.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:07:50.501Z,1520669270.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:07:50.930Z,1520669270.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:07:51.302Z,1520669271.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:07:51.703Z,1520669271.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:07:52.096Z,1520669272.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:07:52.491Z,1520669272.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:07:52.914Z,1520669272.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:07:53.305Z,1520669273.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:07:53.699Z,1520669273.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:07:54.101Z,1520669274.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:07:54.497Z,1520669274.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:07:54.905Z,1520669274.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:07:55.317Z,1520669275.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:07:55.713Z,1520669275.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:07:56.113Z,1520669276.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:07:56.498Z,1520669276.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:07:56.903Z,1520669276.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:07:57.306Z,1520669277.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:07:57.708Z,1520669277.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:07:58.096Z,1520669278.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:07:58.499Z,1520669278.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:07:58.907Z,1520669278.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:07:59.305Z,1520669279.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:07:59.699Z,1520669279.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:08:00.095Z,1520669280.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:08:00.501Z,1520669280.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:08:00.906Z,1520669280.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:08:01.306Z,1520669281.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:08:01.706Z,1520669281.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:08:02.093Z,1520669282.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:08:02.504Z,1520669282.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:08:02.902Z,1520669282.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:08:03.314Z,1520669283.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:08:03.729Z,1520669283.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:08:04.105Z,1520669284.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:08:04.480Z,1520669284.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:08:04.909Z,1520669284.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:08:05.311Z,1520669285.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:08:05.705Z,1520669285.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:08:06.108Z,1520669286.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:08:06.505Z,1520669286.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:08:06.917Z,1520669286.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:08:07.337Z,1520669287.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:08:07.710Z,1520669287.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:08:08.085Z,1520669288.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:08:08.509Z,1520669288.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:08:08.917Z,1520669288.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:08:09.313Z,1520669289.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:08:09.713Z,1520669289.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:08:10.110Z,1520669290.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:08:10.484Z,1520669290.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:08:10.917Z,1520669290.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:08:11.317Z,1520669291.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:08:11.710Z,1520669291.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:08:12.090Z,1520669292.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:08:12.490Z,1520669292.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:08:12.913Z,1520669292.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:08:13.317Z,1520669293.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:08:13.712Z,1520669293.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:08:14.092Z,1520669294.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:08:14.497Z,1520669294.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:08:14.921Z,1520669294.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:08:15.318Z,1520669295.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:08:15.725Z,1520669295.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:08:16.128Z,1520669296.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:08:16.497Z,1520669296.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:08:16.920Z,1520669296.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:08:17.318Z,1520669297.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:08:17.702Z,1520669297.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:08:18.094Z,1520669298.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:08:18.499Z,1520669298.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:08:18.921Z,1520669298.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:08:19.298Z,1520669299.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:08:19.728Z,1520669299.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:08:20.097Z,1520669300.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:08:20.496Z,1520669300.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:08:20.905Z,1520669300.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:08:21.302Z,1520669301.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:08:21.702Z,1520669301.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:08:22.094Z,1520669302.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:08:22.498Z,1520669302.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:08:22.903Z,1520669302.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:08:23.305Z,1520669303.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:08:23.704Z,1520669303.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:08:24.105Z,1520669304.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:08:24.498Z,1520669304.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:08:24.898Z,1520669304.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:08:25.299Z,1520669305.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:08:25.700Z,1520669305.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:08:26.094Z,1520669306.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:08:26.494Z,1520669306.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:08:26.900Z,1520669306.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:08:27.309Z,1520669307.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:08:27.705Z,1520669307.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:08:28.097Z,1520669308.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:08:28.502Z,1520669308.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:08:28.929Z,1520669308.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:08:29.302Z,1520669309.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:08:29.707Z,1520669309.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:08:30.117Z,1520669310.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:08:30.491Z,1520669310.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:08:30.902Z,1520669310.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:08:31.313Z,1520669311.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:08:31.705Z,1520669311.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:08:32.097Z,1520669312.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:08:32.493Z,1520669312.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:08:32.906Z,1520669312.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:08:33.303Z,1520669313.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:08:33.713Z,1520669313.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:08:34.098Z,1520669314.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:08:34.496Z,1520669314.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:08:34.907Z,1520669314.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:08:35.310Z,1520669315.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:08:38.420Z,1520669318.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:08:38.553Z,1520669318.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:08:38.916Z,1520669318.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:08:39.314Z,1520669319.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:08:39.717Z,1520669319.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:08:40.118Z,1520669320.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:08:40.518Z,1520669320.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:08:40.925Z,1520669320.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:08:41.324Z,1520669321.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:08:41.756Z,1520669321.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:08:42.117Z,1520669322.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:08:42.513Z,1520669322.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:08:42.933Z,1520669322.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:08:43.326Z,1520669323.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:08:43.725Z,1520669323.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:08:44.117Z,1520669324.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:08:44.515Z,1520669324.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:08:44.920Z,1520669324.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:08:45.324Z,1520669325.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:08:45.729Z,1520669325.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:08:46.114Z,1520669326.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:08:46.520Z,1520669326.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:08:46.924Z,1520669326.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:08:47.324Z,1520669327.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:08:47.724Z,1520669327.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:08:48.114Z,1520669328.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:08:48.515Z,1520669328.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:08:48.933Z,1520669328.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:08:49.326Z,1520669329.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:08:49.721Z,1520669329.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:08:50.117Z,1520669330.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:08:50.514Z,1520669330.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:08:50.919Z,1520669330.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:08:51.329Z,1520669331.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:08:51.729Z,1520669331.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:08:52.117Z,1520669332.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:08:52.528Z,1520669332.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:08:52.941Z,1520669332.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:08:53.326Z,1520669333.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:08:53.730Z,1520669333.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:08:54.128Z,1520669334.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:08:54.521Z,1520669334.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:08:54.932Z,1520669334.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:08:55.333Z,1520669335.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:08:55.725Z,1520669335.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:08:56.123Z,1520669336.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:08:56.521Z,1520669336.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:08:56.929Z,1520669336.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:08:57.325Z,1520669337.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:08:57.729Z,1520669337.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:08:58.121Z,1520669338.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:08:58.529Z,1520669338.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:08:58.923Z,1520669338.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:08:59.330Z,1520669339.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:08:59.727Z,1520669339.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:09:00.104Z,1520669340.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:09:00.506Z,1520669340.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:09:00.932Z,1520669340.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:09:01.329Z,1520669341.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:09:01.737Z,1520669341.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:09:02.109Z,1520669342.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:09:02.505Z,1520669342.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:09:02.933Z,1520669342.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:09:03.344Z,1520669343.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:09:03.734Z,1520669343.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:09:04.111Z,1520669344.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:09:04.506Z,1520669344.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:09:04.931Z,1520669344.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:09:05.330Z,1520669345.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:09:05.736Z,1520669345.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:09:06.137Z,1520669346.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:09:06.544Z,1520669346.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:09:06.939Z,1520669346.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:09:07.306Z,1520669347.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:09:07.736Z,1520669347.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:09:08.109Z,1520669348.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:09:08.509Z,1520669348.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:09:08.938Z,1520669348.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:09:09.340Z,1520669349.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:09:09.718Z,1520669349.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:09:10.109Z,1520669350.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:09:10.509Z,1520669350.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:09:10.940Z,1520669350.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:09:11.318Z,1520669351.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:09:11.714Z,1520669351.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:09:12.109Z,1520669352.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:09:12.508Z,1520669352.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:09:12.920Z,1520669352.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:09:13.318Z,1520669353.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:09:13.715Z,1520669353.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:09:14.108Z,1520669354.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:09:14.508Z,1520669354.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:09:14.919Z,1520669354.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:09:15.346Z,1520669355.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:09:15.725Z,1520669355.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:09:16.113Z,1520669356.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:09:16.516Z,1520669356.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:09:16.917Z,1520669356.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:09:17.318Z,1520669357.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:09:17.718Z,1520669357.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:09:18.112Z,1520669358.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:09:18.516Z,1520669358.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:09:18.950Z,1520669358.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:09:19.315Z,1520669359.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:09:19.721Z,1520669359.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:09:20.113Z,1520669360.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:09:20.517Z,1520669360.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:09:20.918Z,1520669360.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:09:21.321Z,1520669361.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:09:21.729Z,1520669361.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:09:22.117Z,1520669362.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:09:22.516Z,1520669362.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:09:22.929Z,1520669362.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:09:23.321Z,1520669363.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:09:23.728Z,1520669363.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:09:24.117Z,1520669364.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:09:24.517Z,1520669364.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:09:24.928Z,1520669364.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:09:25.322Z,1520669365.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:09:25.729Z,1520669365.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:09:26.112Z,1520669366.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:09:26.517Z,1520669366.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:09:26.948Z,1520669366.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:09:27.323Z,1520669367.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:09:27.718Z,1520669367.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:09:28.114Z,1520669368.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:09:28.513Z,1520669368.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:09:28.921Z,1520669368.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:09:29.321Z,1520669369.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:09:29.723Z,1520669369.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:09:30.110Z,1520669370.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:09:30.509Z,1520669370.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:09:30.929Z,1520669370.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:09:31.328Z,1520669371.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:09:31.748Z,1520669371.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:09:32.117Z,1520669372.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:09:32.518Z,1520669372.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:09:32.956Z,1520669372.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:09:33.323Z,1520669373.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:09:33.722Z,1520669373.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:09:34.113Z,1520669374.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:09:34.528Z,1520669374.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:09:34.532Z,1520669374.532 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-03-10T08:04:34.5Z
2018-03-10T08:09:34.532Z,1520669374.532 [Default:CheckIn:Read_GPS] Stopped
2018-03-10T08:09:34.532Z,1520669374.532 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-03-10T08:09:34.929Z,1520669374.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:09:35.463Z,1520669375.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:09:38.481Z,1520669378.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:09:38.617Z,1520669378.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:09:38.935Z,1520669378.935 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20180310T051512/Courier0068.lzma
2018-03-10T08:09:39.012Z,1520669379.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:09:39.378Z,1520669379.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:09:39.733Z,1520669379.733 [DataOverHttps](INFO): Moved sent file to Logs/20180310T051512/Courier0068.lzma.bak
2018-03-10T08:09:39.733Z,1520669379.733 [DataOverHttps](INFO): SBD MOMSN=8002995
2018-03-10T08:09:39.797Z,1520669379.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:09:44.827Z,1520669384.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:09:44.985Z,1520669384.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:09:45.326Z,1520669385.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:09:49.651Z,1520669389.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:09:49.863Z,1520669389.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:09:50.244Z,1520669390.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:09:50.678Z,1520669390.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:09:51.053Z,1520669391.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:09:51.429Z,1520669391.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:09:54.572Z,1520669394.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:09:54.700Z,1520669394.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:09:55.030Z,1520669395.030 [DataOverHttps](INFO): Sending 170 bytes from file Logs/20180310T051512/Express0069.lzma
2018-03-10T08:09:55.097Z,1520669395.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:09:55.479Z,1520669395.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:09:55.830Z,1520669395.830 [DataOverHttps](INFO): Moved sent file to Logs/20180310T051512/Express0069.lzma.bak
2018-03-10T08:09:55.830Z,1520669395.830 [DataOverHttps](INFO): SBD MOMSN=8002997
2018-03-10T08:09:55.905Z,1520669395.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:09:56.552Z,1520669396.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:09:56.555Z,1520669396.555 [Default:CheckIn:Read_Iridium] Stopped
2018-03-10T08:09:56.555Z,1520669396.555 [Default:CheckIn:C.Wait] Running Loop=1
2018-03-10T08:09:56.556Z,1520669396.556 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-03-10T08:09:56.676Z,1520669396.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:09:57.101Z,1520669397.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:10:00.203Z,1520669400.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 3.103201 seconds old.
2018-03-10T08:10:00.204Z,1520669400.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:10:00.205Z,1520669400.205 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 3.103547 seconds old.
2018-03-10T08:10:00.206Z,1520669400.206 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 3.103894 seconds old.
2018-03-10T08:10:00.310Z,1520669400.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 3.210365 seconds old.
2018-03-10T08:10:00.312Z,1520669400.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:10:00.313Z,1520669400.313 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 3.210964 seconds old.
2018-03-10T08:10:00.314Z,1520669400.314 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 3.211326 seconds old.
2018-03-10T08:10:00.719Z,1520669400.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 3.618613 seconds old.
2018-03-10T08:10:00.720Z,1520669400.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:10:00.721Z,1520669400.721 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 3.619196 seconds old.
2018-03-10T08:10:00.722Z,1520669400.722 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 3.619552 seconds old.
2018-03-10T08:10:01.119Z,1520669401.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 4.019184 seconds old.
2018-03-10T08:10:01.120Z,1520669401.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:10:01.121Z,1520669401.121 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 4.019532 seconds old.
2018-03-10T08:10:01.122Z,1520669401.122 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 4.019916 seconds old.
2018-03-10T08:10:01.543Z,1520669401.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 4.442408 seconds old.
2018-03-10T08:10:01.544Z,1520669401.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:10:01.545Z,1520669401.545 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 4.443170 seconds old.
2018-03-10T08:10:01.546Z,1520669401.546 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 4.443538 seconds old.
2018-03-10T08:10:01.957Z,1520669401.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:10:02.322Z,1520669402.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:10:02.717Z,1520669402.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:10:03.118Z,1520669403.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:10:03.527Z,1520669403.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:10:03.929Z,1520669403.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:10:04.311Z,1520669404.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:10:04.707Z,1520669404.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:10:05.112Z,1520669405.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 0.405425 seconds old.
2018-03-10T08:10:05.113Z,1520669405.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:10:05.114Z,1520669405.114 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 0.405729 seconds old.
2018-03-10T08:10:05.116Z,1520669405.116 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 0.406425 seconds old.
2018-03-10T08:10:05.514Z,1520669405.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 0.807381 seconds old.
2018-03-10T08:10:05.516Z,1520669405.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:10:05.516Z,1520669405.516 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 0.807988 seconds old.
2018-03-10T08:10:05.517Z,1520669405.517 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 0.808319 seconds old.
2018-03-10T08:10:05.925Z,1520669405.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 1.218530 seconds old.
2018-03-10T08:10:05.926Z,1520669405.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:10:05.927Z,1520669405.927 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 1.218814 seconds old.
2018-03-10T08:10:05.928Z,1520669405.928 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 1.219145 seconds old.
2018-03-10T08:10:06.331Z,1520669406.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 1.624599 seconds old.
2018-03-10T08:10:06.332Z,1520669406.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:10:06.333Z,1520669406.333 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 1.624805 seconds old.
2018-03-10T08:10:06.334Z,1520669406.334 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 1.625128 seconds old.
2018-03-10T08:10:06.719Z,1520669406.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:10:07.111Z,1520669407.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:10:07.517Z,1520669407.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:10:07.918Z,1520669407.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 0.402106 seconds old.
2018-03-10T08:10:07.920Z,1520669407.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:10:07.920Z,1520669407.920 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 0.402745 seconds old.
2018-03-10T08:10:07.922Z,1520669407.922 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 0.403077 seconds old.
2018-03-10T08:10:08.322Z,1520669408.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 0.805302 seconds old.
2018-03-10T08:10:08.323Z,1520669408.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:10:08.324Z,1520669408.324 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 0.805817 seconds old.
2018-03-10T08:10:08.325Z,1520669408.325 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 0.806160 seconds old.
2018-03-10T08:10:08.732Z,1520669408.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:10:09.110Z,1520669409.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:10:09.517Z,1520669409.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:10:09.923Z,1520669409.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:10:10.333Z,1520669410.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:10:10.725Z,1520669410.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:10:11.115Z,1520669411.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:10:11.512Z,1520669411.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:10:11.931Z,1520669411.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 0.419195 seconds old.
2018-03-10T08:10:11.932Z,1520669411.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:10:11.933Z,1520669411.933 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 0.419711 seconds old.
2018-03-10T08:10:11.934Z,1520669411.934 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 0.420045 seconds old.
2018-03-10T08:10:12.332Z,1520669412.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 0.821213 seconds old.
2018-03-10T08:10:12.333Z,1520669412.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:10:12.334Z,1520669412.334 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 0.821542 seconds old.
2018-03-10T08:10:12.336Z,1520669412.336 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 0.822108 seconds old.
2018-03-10T08:10:12.735Z,1520669412.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 1.224189 seconds old.
2018-03-10T08:10:12.736Z,1520669412.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:10:12.737Z,1520669412.737 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 1.224465 seconds old.
2018-03-10T08:10:12.738Z,1520669412.738 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 1.224796 seconds old.
2018-03-10T08:10:13.114Z,1520669413.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 1.602460 seconds old.
2018-03-10T08:10:13.115Z,1520669413.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:10:13.116Z,1520669413.116 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 1.603052 seconds old.
2018-03-10T08:10:13.117Z,1520669413.117 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 1.603393 seconds old.
2018-03-10T08:10:13.515Z,1520669413.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:10:13.918Z,1520669413.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:10:14.323Z,1520669414.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:10:14.729Z,1520669414.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:10:15.145Z,1520669415.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:10:15.521Z,1520669415.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:10:15.923Z,1520669415.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:10:16.331Z,1520669416.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:10:16.777Z,1520669416.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:10:17.105Z,1520669417.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:10:17.501Z,1520669417.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:10:17.914Z,1520669417.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:10:18.314Z,1520669418.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:10:18.717Z,1520669418.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:10:19.108Z,1520669419.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:10:19.517Z,1520669419.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:10:19.941Z,1520669419.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:10:20.315Z,1520669420.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:10:20.715Z,1520669420.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:10:21.114Z,1520669421.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:10:21.512Z,1520669421.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:10:21.915Z,1520669421.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:10:22.315Z,1520669422.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:10:22.744Z,1520669422.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:10:23.111Z,1520669423.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:10:23.511Z,1520669423.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 0.400985 seconds old.
2018-03-10T08:10:23.512Z,1520669423.512 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:10:23.513Z,1520669423.513 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 58
2018-03-10T08:10:23.513Z,1520669423.513 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-03-10T08:10:23.514Z,1520669423.514 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 0.401666 seconds old.
2018-03-10T08:10:23.515Z,1520669423.515 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:10:23.515Z,1520669423.515 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 58
2018-03-10T08:10:23.515Z,1520669423.515 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-03-10T08:10:23.516Z,1520669423.516 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 0.403444 seconds old.
2018-03-10T08:10:23.517Z,1520669423.517 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:10:23.517Z,1520669423.517 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 58
2018-03-10T08:10:23.517Z,1520669423.517 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-10T08:10:23.545Z,1520669423.545 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-03-10T08:10:23.545Z,1520669423.545 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-03-10T08:10:23.545Z,1520669423.545 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-10T08:10:23.929Z,1520669423.929 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-03-10T08:10:23.929Z,1520669423.929 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 58
2018-03-10T08:10:23.930Z,1520669423.930 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-03-10T08:10:23.930Z,1520669423.930 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 58
2018-03-10T08:10:23.930Z,1520669423.930 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-10T08:10:23.930Z,1520669423.930 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 58
2018-03-10T08:10:24.322Z,1520669424.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-03-10T08:10:24.323Z,1520669424.323 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-03-10T08:10:24.323Z,1520669424.323 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-03-10T08:10:24.324Z,1520669424.324 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-03-10T08:10:24.324Z,1520669424.324 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-03-10T08:10:24.324Z,1520669424.324 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-03-10T08:10:24.325Z,1520669424.325 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-10T08:10:24.325Z,1520669424.325 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-10T08:10:24.325Z,1520669424.325 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-10T08:10:24.718Z,1520669424.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-03-10T08:10:24.719Z,1520669424.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:10:25.120Z,1520669425.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-03-10T08:10:25.121Z,1520669425.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:10:25.531Z,1520669425.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 0.411126 seconds old.
2018-03-10T08:10:25.531Z,1520669425.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-03-10T08:10:25.532Z,1520669425.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:10:25.533Z,1520669425.533 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 0.411668 seconds old.
2018-03-10T08:10:25.534Z,1520669425.534 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 0.411989 seconds old.
2018-03-10T08:10:25.921Z,1520669425.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 0.801888 seconds old.
2018-03-10T08:10:25.922Z,1520669425.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-03-10T08:10:25.923Z,1520669425.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:10:25.924Z,1520669425.924 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 0.802400 seconds old.
2018-03-10T08:10:25.925Z,1520669425.925 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 0.802730 seconds old.
2018-03-10T08:10:26.322Z,1520669426.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 1.202772 seconds old.
2018-03-10T08:10:26.323Z,1520669426.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-03-10T08:10:26.324Z,1520669426.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:10:26.325Z,1520669426.325 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 1.203169 seconds old.
2018-03-10T08:10:26.326Z,1520669426.326 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 1.203476 seconds old.
2018-03-10T08:10:26.732Z,1520669426.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 1.612506 seconds old.
2018-03-10T08:10:26.733Z,1520669426.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-03-10T08:10:26.733Z,1520669426.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:10:26.734Z,1520669426.734 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 1.612771 seconds old.
2018-03-10T08:10:26.736Z,1520669426.736 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 1.613315 seconds old.
2018-03-10T08:10:27.122Z,1520669427.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 2.002980 seconds old.
2018-03-10T08:10:27.123Z,1520669427.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-03-10T08:10:27.124Z,1520669427.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:10:27.125Z,1520669427.125 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 2.003475 seconds old.
2018-03-10T08:10:27.126Z,1520669427.126 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 2.003793 seconds old.
2018-03-10T08:10:27.498Z,1520669427.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 2.378821 seconds old.
2018-03-10T08:10:27.522Z,1520669427.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-03-10T08:10:27.523Z,1520669427.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:10:27.524Z,1520669427.524 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 2.402185 seconds old.
2018-03-10T08:10:27.525Z,1520669427.525 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 2.402522 seconds old.
2018-03-10T08:10:27.922Z,1520669427.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-03-10T08:10:27.923Z,1520669427.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:10:28.326Z,1520669428.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-03-10T08:10:28.327Z,1520669428.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:10:28.724Z,1520669428.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-03-10T08:10:28.725Z,1520669428.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:10:29.121Z,1520669429.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-03-10T08:10:29.121Z,1520669429.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:10:29.519Z,1520669429.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-03-10T08:10:29.520Z,1520669429.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:10:29.925Z,1520669429.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-03-10T08:10:29.925Z,1520669429.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:10:30.332Z,1520669430.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-03-10T08:10:30.333Z,1520669430.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:10:30.732Z,1520669430.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-03-10T08:10:30.733Z,1520669430.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:10:31.116Z,1520669431.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-03-10T08:10:31.117Z,1520669431.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:10:31.527Z,1520669431.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 0.411629 seconds old.
2018-03-10T08:10:31.528Z,1520669431.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-03-10T08:10:31.529Z,1520669431.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:10:31.530Z,1520669431.530 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 0.411868 seconds old.
2018-03-10T08:10:31.531Z,1520669431.531 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 0.412174 seconds old.
2018-03-10T08:10:31.943Z,1520669431.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 0.827818 seconds old.
2018-03-10T08:10:31.944Z,1520669431.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-03-10T08:10:31.945Z,1520669431.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:10:31.946Z,1520669431.946 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 0.828060 seconds old.
2018-03-10T08:10:31.947Z,1520669431.947 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 0.828571 seconds old.
2018-03-10T08:10:32.329Z,1520669432.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 1.213752 seconds old.
2018-03-10T08:10:32.330Z,1520669432.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-03-10T08:10:32.331Z,1520669432.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:10:32.332Z,1520669432.332 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 1.214074 seconds old.
2018-03-10T08:10:32.333Z,1520669432.333 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 1.214373 seconds old.
2018-03-10T08:10:32.732Z,1520669432.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-03-10T08:10:32.733Z,1520669432.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:10:33.122Z,1520669433.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-03-10T08:10:33.124Z,1520669433.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:10:33.527Z,1520669433.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-03-10T08:10:33.528Z,1520669433.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:10:33.930Z,1520669433.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-03-10T08:10:33.932Z,1520669433.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:10:34.330Z,1520669434.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-03-10T08:10:34.331Z,1520669434.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:10:34.732Z,1520669434.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-03-10T08:10:34.733Z,1520669434.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:10:35.123Z,1520669435.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-03-10T08:10:35.124Z,1520669435.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:10:35.522Z,1520669435.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 0.398673 seconds old.
2018-03-10T08:10:35.522Z,1520669435.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-03-10T08:10:35.523Z,1520669435.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:10:35.524Z,1520669435.524 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 0.399105 seconds old.
2018-03-10T08:10:35.525Z,1520669435.525 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 0.399437 seconds old.
2018-03-10T08:10:35.939Z,1520669435.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 0.816352 seconds old.
2018-03-10T08:10:35.940Z,1520669435.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-03-10T08:10:35.941Z,1520669435.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:10:35.942Z,1520669435.942 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 0.816622 seconds old.
2018-03-10T08:10:35.943Z,1520669435.943 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 0.817102 seconds old.
2018-03-10T08:10:36.331Z,1520669436.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 1.208342 seconds old.
2018-03-10T08:10:36.332Z,1520669436.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-03-10T08:10:36.333Z,1520669436.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:10:36.334Z,1520669436.334 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 1.208521 seconds old.
2018-03-10T08:10:36.335Z,1520669436.335 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 1.208847 seconds old.
2018-03-10T08:10:36.731Z,1520669436.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 1.608300 seconds old.
2018-03-10T08:10:36.732Z,1520669436.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-03-10T08:10:36.733Z,1520669436.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:10:36.734Z,1520669436.734 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 1.608497 seconds old.
2018-03-10T08:10:36.735Z,1520669436.735 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 1.608805 seconds old.
2018-03-10T08:10:37.105Z,1520669437.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 1.982036 seconds old.
2018-03-10T08:10:37.106Z,1520669437.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-03-10T08:10:37.127Z,1520669437.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:10:37.128Z,1520669437.128 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 2.002456 seconds old.
2018-03-10T08:10:37.129Z,1520669437.129 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 2.002829 seconds old.
2018-03-10T08:10:37.509Z,1520669437.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-03-10T08:10:37.510Z,1520669437.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:10:37.946Z,1520669437.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-03-10T08:10:37.951Z,1520669437.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:10:38.404Z,1520669438.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.9 s old, using for 20.0 s.
2018-03-10T08:10:38.405Z,1520669438.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:10:38.717Z,1520669438.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-03-10T08:10:38.718Z,1520669438.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:10:39.119Z,1520669439.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-03-10T08:10:39.120Z,1520669439.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:10:39.521Z,1520669439.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-03-10T08:10:39.522Z,1520669439.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:10:39.914Z,1520669439.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-03-10T08:10:39.916Z,1520669439.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:10:40.344Z,1520669440.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-03-10T08:10:40.345Z,1520669440.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:10:40.717Z,1520669440.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-03-10T08:10:40.718Z,1520669440.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:10:41.113Z,1520669441.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-03-10T08:10:41.114Z,1520669441.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:10:41.513Z,1520669441.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-03-10T08:10:41.514Z,1520669441.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:10:41.914Z,1520669441.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2018-03-10T08:10:41.915Z,1520669441.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:10:42.314Z,1520669442.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2018-03-10T08:10:42.315Z,1520669442.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:10:42.714Z,1520669442.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2018-03-10T08:10:42.715Z,1520669442.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:10:43.112Z,1520669443.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2018-03-10T08:10:43.113Z,1520669443.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:10:43.506Z,1520669443.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 20.0 s old, using for 20.0 s.
2018-03-10T08:10:43.507Z,1520669443.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:10:43.915Z,1520669443.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:10:44.318Z,1520669444.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:10:44.714Z,1520669444.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 0.397033 seconds old.
2018-03-10T08:10:44.716Z,1520669444.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:10:44.717Z,1520669444.717 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 0.397830 seconds old.
2018-03-10T08:10:44.718Z,1520669444.718 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 0.398076 seconds old.
2018-03-10T08:10:45.116Z,1520669445.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 0.798498 seconds old.
2018-03-10T08:10:45.117Z,1520669445.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:10:45.118Z,1520669445.118 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 0.798853 seconds old.
2018-03-10T08:10:45.119Z,1520669445.119 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 0.799091 seconds old.
2018-03-10T08:10:45.508Z,1520669445.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 1.190731 seconds old.
2018-03-10T08:10:45.509Z,1520669445.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:10:45.510Z,1520669445.510 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 1.191062 seconds old.
2018-03-10T08:10:45.511Z,1520669445.511 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 1.191284 seconds old.
2018-03-10T08:10:45.920Z,1520669445.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 1.602465 seconds old.
2018-03-10T08:10:45.921Z,1520669445.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:10:45.921Z,1520669445.921 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 1.602793 seconds old.
2018-03-10T08:10:45.923Z,1520669445.923 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 1.603024 seconds old.
2018-03-10T08:10:46.317Z,1520669446.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 2.000015 seconds old.
2018-03-10T08:10:46.318Z,1520669446.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:10:46.319Z,1520669446.319 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 2.000554 seconds old.
2018-03-10T08:10:46.320Z,1520669446.320 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 2.000812 seconds old.
2018-03-10T08:10:46.717Z,1520669446.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 2.400025 seconds old.
2018-03-10T08:10:46.718Z,1520669446.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:10:46.719Z,1520669446.719 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 2.400449 seconds old.
2018-03-10T08:10:46.720Z,1520669446.720 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 2.400673 seconds old.
2018-03-10T08:10:47.112Z,1520669447.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 2.794727 seconds old.
2018-03-10T08:10:47.113Z,1520669447.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:10:47.114Z,1520669447.114 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 2.795028 seconds old.
2018-03-10T08:10:47.115Z,1520669447.115 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 2.795220 seconds old.
2018-03-10T08:10:47.516Z,1520669447.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 3.198361 seconds old.
2018-03-10T08:10:47.517Z,1520669447.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:10:47.517Z,1520669447.517 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 3.198693 seconds old.
2018-03-10T08:10:47.518Z,1520669447.518 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 3.198894 seconds old.
2018-03-10T08:10:47.919Z,1520669447.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:10:48.319Z,1520669448.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:10:48.717Z,1520669448.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:10:49.113Z,1520669449.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:10:49.517Z,1520669449.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:10:49.918Z,1520669449.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:10:50.325Z,1520669450.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:10:50.745Z,1520669450.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:10:51.111Z,1520669451.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:10:51.543Z,1520669451.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:10:51.948Z,1520669451.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:10:52.321Z,1520669452.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 0.373628 seconds old.
2018-03-10T08:10:52.322Z,1520669452.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:10:52.323Z,1520669452.323 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 0.374133 seconds old.
2018-03-10T08:10:52.325Z,1520669452.325 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 0.374452 seconds old.
2018-03-10T08:10:52.727Z,1520669452.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 0.779402 seconds old.
2018-03-10T08:10:52.728Z,1520669452.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:10:52.729Z,1520669452.729 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 0.779721 seconds old.
2018-03-10T08:10:52.730Z,1520669452.730 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 0.780029 seconds old.
2018-03-10T08:10:53.116Z,1520669453.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 1.167686 seconds old.
2018-03-10T08:10:53.117Z,1520669453.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:10:53.117Z,1520669453.117 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 1.167974 seconds old.
2018-03-10T08:10:53.118Z,1520669453.118 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 1.168262 seconds old.
2018-03-10T08:10:53.511Z,1520669453.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 1.563566 seconds old.
2018-03-10T08:10:53.512Z,1520669453.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:10:53.513Z,1520669453.513 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 1.563860 seconds old.
2018-03-10T08:10:53.514Z,1520669453.514 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 1.564148 seconds old.
2018-03-10T08:10:53.920Z,1520669453.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 1.972596 seconds old.
2018-03-10T08:10:53.921Z,1520669453.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:10:53.922Z,1520669453.922 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 1.972875 seconds old.
2018-03-10T08:10:53.923Z,1520669453.923 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 1.973247 seconds old.
2018-03-10T08:10:54.312Z,1520669454.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 2.364609 seconds old.
2018-03-10T08:10:54.313Z,1520669454.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:10:54.314Z,1520669454.314 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 2.364898 seconds old.
2018-03-10T08:10:54.316Z,1520669454.316 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 2.365581 seconds old.
2018-03-10T08:10:54.721Z,1520669454.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:10:55.114Z,1520669455.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:10:55.513Z,1520669455.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:10:55.933Z,1520669455.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:10:56.327Z,1520669456.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:10:56.722Z,1520669456.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:10:57.119Z,1520669457.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:11:00.219Z,1520669460.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:11:00.355Z,1520669460.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:11:00.714Z,1520669460.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:11:01.113Z,1520669461.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:11:01.507Z,1520669461.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:11:01.885Z,1520669461.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 0.378428 seconds old.
2018-03-10T08:11:01.886Z,1520669461.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:11:01.887Z,1520669461.887 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 0.378560 seconds old.
2018-03-10T08:11:01.888Z,1520669461.888 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 0.379165 seconds old.
2018-03-10T08:11:02.290Z,1520669462.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 0.783983 seconds old.
2018-03-10T08:11:02.291Z,1520669462.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:11:02.292Z,1520669462.292 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 0.784128 seconds old.
2018-03-10T08:11:02.293Z,1520669462.293 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 0.784443 seconds old.
2018-03-10T08:11:02.719Z,1520669462.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 1.212492 seconds old.
2018-03-10T08:11:02.720Z,1520669462.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:11:02.721Z,1520669462.721 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 1.212774 seconds old.
2018-03-10T08:11:02.722Z,1520669462.722 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 1.213090 seconds old.
2018-03-10T08:11:03.111Z,1520669463.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:11:03.539Z,1520669463.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 0.441377 seconds old.
2018-03-10T08:11:03.540Z,1520669463.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:11:03.541Z,1520669463.541 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 0.429498 seconds old.
2018-03-10T08:11:03.542Z,1520669463.542 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 0.429801 seconds old.
2018-03-10T08:11:03.928Z,1520669463.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:11:04.291Z,1520669464.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:11:04.691Z,1520669464.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:11:05.097Z,1520669465.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:11:05.488Z,1520669465.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 0.391964 seconds old.
2018-03-10T08:11:05.489Z,1520669465.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:11:05.490Z,1520669465.490 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 0.392345 seconds old.
2018-03-10T08:11:05.491Z,1520669465.491 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 0.392874 seconds old.
2018-03-10T08:11:05.893Z,1520669465.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 0.797129 seconds old.
2018-03-10T08:11:05.894Z,1520669465.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:11:05.895Z,1520669465.895 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 0.797524 seconds old.
2018-03-10T08:11:05.896Z,1520669465.896 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 0.797872 seconds old.
2018-03-10T08:11:06.293Z,1520669466.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 1.197130 seconds old.
2018-03-10T08:11:06.294Z,1520669466.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:11:06.295Z,1520669466.295 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 1.197642 seconds old.
2018-03-10T08:11:06.296Z,1520669466.296 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 1.198001 seconds old.
2018-03-10T08:11:06.702Z,1520669466.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 1.605900 seconds old.
2018-03-10T08:11:06.722Z,1520669466.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:11:06.723Z,1520669466.723 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 1.625692 seconds old.
2018-03-10T08:11:06.724Z,1520669466.724 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 1.626070 seconds old.
2018-03-10T08:11:07.087Z,1520669467.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 1.990871 seconds old.
2018-03-10T08:11:07.088Z,1520669467.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:11:07.089Z,1520669467.089 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 1.991189 seconds old.
2018-03-10T08:11:07.090Z,1520669467.090 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 1.991509 seconds old.
2018-03-10T08:11:07.486Z,1520669467.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 2.390405 seconds old.
2018-03-10T08:11:07.492Z,1520669467.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:11:07.493Z,1520669467.493 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 2.394970 seconds old.
2018-03-10T08:11:07.494Z,1520669467.494 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 2.395300 seconds old.
2018-03-10T08:11:07.893Z,1520669467.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 2.797212 seconds old.
2018-03-10T08:11:07.894Z,1520669467.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:11:07.895Z,1520669467.895 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 2.797712 seconds old.
2018-03-10T08:11:07.896Z,1520669467.896 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 2.798067 seconds old.
2018-03-10T08:11:08.294Z,1520669468.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:11:08.701Z,1520669468.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:11:09.095Z,1520669469.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:11:09.493Z,1520669469.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:11:09.901Z,1520669469.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:11:10.295Z,1520669470.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:11:10.697Z,1520669470.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:11:11.093Z,1520669471.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:11:11.492Z,1520669471.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:11:11.894Z,1520669471.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:11:12.299Z,1520669472.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:11:12.698Z,1520669472.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:11:13.100Z,1520669473.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:11:13.493Z,1520669473.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:11:13.899Z,1520669473.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:11:14.295Z,1520669474.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:11:14.706Z,1520669474.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:11:15.176Z,1520669475.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 0.470056 seconds old.
2018-03-10T08:11:15.176Z,1520669475.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:11:15.177Z,1520669475.177 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 0.454292 seconds old.
2018-03-10T08:11:15.178Z,1520669475.178 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 0.454532 seconds old.
2018-03-10T08:11:15.492Z,1520669475.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 0.786255 seconds old.
2018-03-10T08:11:15.493Z,1520669475.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:11:15.493Z,1520669475.493 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 0.770378 seconds old.
2018-03-10T08:11:15.494Z,1520669475.494 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 0.770594 seconds old.
2018-03-10T08:11:15.910Z,1520669475.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 1.204297 seconds old.
2018-03-10T08:11:15.927Z,1520669475.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:11:15.928Z,1520669475.928 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 1.204663 seconds old.
2018-03-10T08:11:15.929Z,1520669475.929 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 1.204938 seconds old.
2018-03-10T08:11:16.335Z,1520669476.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 1.629259 seconds old.
2018-03-10T08:11:16.336Z,1520669476.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:11:16.337Z,1520669476.337 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 1.613601 seconds old.
2018-03-10T08:11:16.338Z,1520669476.338 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 1.613818 seconds old.
2018-03-10T08:11:16.704Z,1520669476.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 1.998424 seconds old.
2018-03-10T08:11:16.705Z,1520669476.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:11:16.706Z,1520669476.706 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 1.982521 seconds old.
2018-03-10T08:11:16.707Z,1520669476.707 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 1.982733 seconds old.
2018-03-10T08:11:17.102Z,1520669477.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 2.396816 seconds old.
2018-03-10T08:11:17.104Z,1520669477.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:11:17.105Z,1520669477.105 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 2.381701 seconds old.
2018-03-10T08:11:17.106Z,1520669477.106 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 2.381919 seconds old.
2018-03-10T08:11:17.503Z,1520669477.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:11:17.915Z,1520669477.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 0.413415 seconds old.
2018-03-10T08:11:17.916Z,1520669477.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:11:17.917Z,1520669477.917 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 0.413527 seconds old.
2018-03-10T08:11:17.918Z,1520669477.918 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 0.413845 seconds old.
2018-03-10T08:11:18.321Z,1520669478.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 0.819455 seconds old.
2018-03-10T08:11:18.322Z,1520669478.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:11:18.376Z,1520669478.376 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 0.871831 seconds old.
2018-03-10T08:11:18.377Z,1520669478.377 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 0.872231 seconds old.
2018-03-10T08:11:18.713Z,1520669478.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 1.210808 seconds old.
2018-03-10T08:11:18.714Z,1520669478.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:11:18.719Z,1520669478.719 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 1.210896 seconds old.
2018-03-10T08:11:18.721Z,1520669478.721 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 1.216155 seconds old.
2018-03-10T08:11:19.111Z,1520669479.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 1.609249 seconds old.
2018-03-10T08:11:19.112Z,1520669479.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:11:19.113Z,1520669479.113 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 1.609322 seconds old.
2018-03-10T08:11:19.114Z,1520669479.114 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 1.609632 seconds old.
2018-03-10T08:11:19.480Z,1520669479.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 1.978476 seconds old.
2018-03-10T08:11:19.481Z,1520669479.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:11:19.482Z,1520669479.482 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 1.978538 seconds old.
2018-03-10T08:11:19.483Z,1520669479.483 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 1.979049 seconds old.
2018-03-10T08:11:19.930Z,1520669479.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 2.428296 seconds old.
2018-03-10T08:11:19.935Z,1520669479.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:11:19.939Z,1520669479.939 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 2.435698 seconds old.
2018-03-10T08:11:19.940Z,1520669479.940 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 2.436068 seconds old.
2018-03-10T08:11:20.298Z,1520669480.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:11:20.698Z,1520669480.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 0.400827 seconds old.
2018-03-10T08:11:20.699Z,1520669480.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:11:20.700Z,1520669480.700 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 0.401433 seconds old.
2018-03-10T08:11:20.701Z,1520669480.701 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 0.401684 seconds old.
2018-03-10T08:11:21.092Z,1520669481.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 0.795101 seconds old.
2018-03-10T08:11:21.093Z,1520669481.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:11:21.094Z,1520669481.094 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 0.795438 seconds old.
2018-03-10T08:11:21.096Z,1520669481.096 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 0.796613 seconds old.
2018-03-10T08:11:21.487Z,1520669481.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 1.190086 seconds old.
2018-03-10T08:11:21.488Z,1520669481.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:11:21.489Z,1520669481.489 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 1.190412 seconds old.
2018-03-10T08:11:21.490Z,1520669481.490 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 1.190641 seconds old.
2018-03-10T08:11:21.898Z,1520669481.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 1.600387 seconds old.
2018-03-10T08:11:21.899Z,1520669481.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:11:21.900Z,1520669481.900 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 1.600954 seconds old.
2018-03-10T08:11:21.901Z,1520669481.901 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 1.601212 seconds old.
2018-03-10T08:11:22.305Z,1520669482.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 2.008176 seconds old.
2018-03-10T08:11:22.306Z,1520669482.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:11:22.323Z,1520669482.323 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 2.024627 seconds old.
2018-03-10T08:11:22.324Z,1520669482.324 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 2.024948 seconds old.
2018-03-10T08:11:22.697Z,1520669482.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 2.399565 seconds old.
2018-03-10T08:11:22.698Z,1520669482.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:11:22.699Z,1520669482.699 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 2.399893 seconds old.
2018-03-10T08:11:22.700Z,1520669482.700 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 2.400213 seconds old.
2018-03-10T08:11:23.092Z,1520669483.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 2.795080 seconds old.
2018-03-10T08:11:23.093Z,1520669483.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:11:23.094Z,1520669483.094 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 2.795423 seconds old.
2018-03-10T08:11:23.095Z,1520669483.095 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 2.795843 seconds old.
2018-03-10T08:11:23.490Z,1520669483.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 3.192485 seconds old.
2018-03-10T08:11:23.491Z,1520669483.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:11:23.492Z,1520669483.492 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 3.193067 seconds old.
2018-03-10T08:11:23.493Z,1520669483.493 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 3.193320 seconds old.
2018-03-10T08:11:23.903Z,1520669483.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 3.606168 seconds old.
2018-03-10T08:11:23.904Z,1520669483.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:11:23.905Z,1520669483.905 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 3.606497 seconds old.
2018-03-10T08:11:23.906Z,1520669483.906 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 3.606718 seconds old.
2018-03-10T08:11:24.303Z,1520669484.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 4.006289 seconds old.
2018-03-10T08:11:24.304Z,1520669484.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:11:24.305Z,1520669484.305 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 4.006625 seconds old.
2018-03-10T08:11:24.306Z,1520669484.306 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 4.006854 seconds old.
2018-03-10T08:11:24.698Z,1520669484.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:11:25.092Z,1520669485.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 0.394696 seconds old.
2018-03-10T08:11:25.093Z,1520669485.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:11:25.094Z,1520669485.094 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 0.394823 seconds old.
2018-03-10T08:11:25.095Z,1520669485.095 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 0.395191 seconds old.
2018-03-10T08:11:25.492Z,1520669485.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 0.794418 seconds old.
2018-03-10T08:11:25.493Z,1520669485.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:11:25.494Z,1520669485.494 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 0.794539 seconds old.
2018-03-10T08:11:25.495Z,1520669485.495 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 0.794817 seconds old.
2018-03-10T08:11:25.897Z,1520669485.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 1.199604 seconds old.
2018-03-10T08:11:25.898Z,1520669485.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:11:25.899Z,1520669485.899 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 1.199927 seconds old.
2018-03-10T08:11:25.900Z,1520669485.900 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 1.200251 seconds old.
2018-03-10T08:11:26.303Z,1520669486.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 1.605807 seconds old.
2018-03-10T08:11:26.304Z,1520669486.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:11:26.305Z,1520669486.305 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 1.605925 seconds old.
2018-03-10T08:11:26.306Z,1520669486.306 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 1.606208 seconds old.
2018-03-10T08:11:26.703Z,1520669486.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 2.005990 seconds old.
2018-03-10T08:11:26.704Z,1520669486.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:11:26.705Z,1520669486.705 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 2.006112 seconds old.
2018-03-10T08:11:26.706Z,1520669486.706 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 2.006433 seconds old.
2018-03-10T08:11:27.099Z,1520669487.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 2.401900 seconds old.
2018-03-10T08:11:27.100Z,1520669487.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:11:27.101Z,1520669487.101 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 2.402017 seconds old.
2018-03-10T08:11:27.102Z,1520669487.102 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 2.402305 seconds old.
2018-03-10T08:11:27.529Z,1520669487.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 2.831472 seconds old.
2018-03-10T08:11:27.530Z,1520669487.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:11:27.531Z,1520669487.531 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 2.831600 seconds old.
2018-03-10T08:11:27.532Z,1520669487.532 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 2.832069 seconds old.
2018-03-10T08:11:27.900Z,1520669487.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 3.202316 seconds old.
2018-03-10T08:11:27.901Z,1520669487.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:11:27.902Z,1520669487.902 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 3.202443 seconds old.
2018-03-10T08:11:27.904Z,1520669487.904 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 3.202723 seconds old.
2018-03-10T08:11:28.306Z,1520669488.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 3.608674 seconds old.
2018-03-10T08:11:28.307Z,1520669488.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:11:28.308Z,1520669488.308 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 3.609012 seconds old.
2018-03-10T08:11:28.309Z,1520669488.309 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 3.609312 seconds old.
2018-03-10T08:11:28.731Z,1520669488.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 4.033479 seconds old.
2018-03-10T08:11:28.732Z,1520669488.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:11:28.733Z,1520669488.733 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 4.033609 seconds old.
2018-03-10T08:11:28.734Z,1520669488.734 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 4.033886 seconds old.
2018-03-10T08:11:29.092Z,1520669489.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 4.394449 seconds old.
2018-03-10T08:11:29.093Z,1520669489.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:11:29.094Z,1520669489.094 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 4.394558 seconds old.
2018-03-10T08:11:29.095Z,1520669489.095 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 4.394830 seconds old.
2018-03-10T08:11:29.494Z,1520669489.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 4.796070 seconds old.
2018-03-10T08:11:29.495Z,1520669489.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:11:29.496Z,1520669489.496 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 4.796409 seconds old.
2018-03-10T08:11:29.497Z,1520669489.497 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 4.796720 seconds old.
2018-03-10T08:11:29.901Z,1520669489.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 5.203845 seconds old.
2018-03-10T08:11:29.902Z,1520669489.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:11:29.903Z,1520669489.903 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 5.204039 seconds old.
2018-03-10T08:11:29.904Z,1520669489.904 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 5.204341 seconds old.
2018-03-10T08:11:30.304Z,1520669490.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 5.606295 seconds old.
2018-03-10T08:11:30.305Z,1520669490.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:11:30.306Z,1520669490.306 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 5.606409 seconds old.
2018-03-10T08:11:30.307Z,1520669490.307 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 5.606689 seconds old.
2018-03-10T08:11:30.702Z,1520669490.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 6.004028 seconds old.
2018-03-10T08:11:30.703Z,1520669490.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:11:30.704Z,1520669490.704 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 6.004376 seconds old.
2018-03-10T08:11:30.705Z,1520669490.705 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 6.004680 seconds old.
2018-03-10T08:11:31.090Z,1520669491.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 6.392665 seconds old.
2018-03-10T08:11:31.091Z,1520669491.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:11:31.092Z,1520669491.092 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 6.392841 seconds old.
2018-03-10T08:11:31.093Z,1520669491.093 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 6.393109 seconds old.
2018-03-10T08:11:31.488Z,1520669491.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 6.790322 seconds old.
2018-03-10T08:11:31.489Z,1520669491.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:11:31.490Z,1520669491.490 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 6.790433 seconds old.
2018-03-10T08:11:31.491Z,1520669491.491 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 6.790695 seconds old.
2018-03-10T08:11:31.901Z,1520669491.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 7.203200 seconds old.
2018-03-10T08:11:31.902Z,1520669491.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:11:31.902Z,1520669491.902 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 7.203299 seconds old.
2018-03-10T08:11:31.904Z,1520669491.904 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 7.203782 seconds old.
2018-03-10T08:11:32.305Z,1520669492.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:11:32.709Z,1520669492.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:11:33.101Z,1520669493.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:11:33.492Z,1520669493.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:11:33.903Z,1520669493.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:11:34.305Z,1520669494.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:11:34.705Z,1520669494.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:11:35.094Z,1520669495.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:11:35.498Z,1520669495.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:11:35.903Z,1520669495.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:11:36.309Z,1520669496.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:11:36.705Z,1520669496.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:11:37.100Z,1520669497.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:11:37.492Z,1520669497.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 0.391760 seconds old.
2018-03-10T08:11:37.493Z,1520669497.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:11:37.493Z,1520669497.493 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 0.392102 seconds old.
2018-03-10T08:11:37.494Z,1520669497.494 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 0.392406 seconds old.
2018-03-10T08:11:37.906Z,1520669497.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 0.805892 seconds old.
2018-03-10T08:11:37.907Z,1520669497.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:11:37.908Z,1520669497.908 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 0.806456 seconds old.
2018-03-10T08:11:37.909Z,1520669497.909 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 0.806773 seconds old.
2018-03-10T08:11:38.311Z,1520669498.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 1.211386 seconds old.
2018-03-10T08:11:38.312Z,1520669498.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:11:38.313Z,1520669498.313 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 1.211703 seconds old.
2018-03-10T08:11:38.314Z,1520669498.314 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 1.211997 seconds old.
2018-03-10T08:11:38.707Z,1520669498.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 1.607656 seconds old.
2018-03-10T08:11:38.708Z,1520669498.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:11:38.709Z,1520669498.709 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 1.608015 seconds old.
2018-03-10T08:11:38.710Z,1520669498.710 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 1.608307 seconds old.
2018-03-10T08:11:39.080Z,1520669499.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 1.979905 seconds old.
2018-03-10T08:11:39.081Z,1520669499.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:11:39.081Z,1520669499.081 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 1.980249 seconds old.
2018-03-10T08:11:39.082Z,1520669499.082 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 1.980523 seconds old.
2018-03-10T08:11:39.503Z,1520669499.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 2.403369 seconds old.
2018-03-10T08:11:39.504Z,1520669499.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:11:39.505Z,1520669499.505 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 2.403715 seconds old.
2018-03-10T08:11:39.506Z,1520669499.506 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 2.404020 seconds old.
2018-03-10T08:11:39.911Z,1520669499.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 2.811688 seconds old.
2018-03-10T08:11:39.912Z,1520669499.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:11:39.913Z,1520669499.913 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 2.812000 seconds old.
2018-03-10T08:11:39.914Z,1520669499.914 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 2.812293 seconds old.
2018-03-10T08:11:40.331Z,1520669500.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 3.231705 seconds old.
2018-03-10T08:11:40.332Z,1520669500.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:11:40.333Z,1520669500.333 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 3.232010 seconds old.
2018-03-10T08:11:40.334Z,1520669500.334 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 3.232312 seconds old.
2018-03-10T08:11:40.717Z,1520669500.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 3.617438 seconds old.
2018-03-10T08:11:40.718Z,1520669500.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:11:40.719Z,1520669500.719 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 3.617823 seconds old.
2018-03-10T08:11:40.720Z,1520669500.720 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 3.618128 seconds old.
2018-03-10T08:11:41.109Z,1520669501.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:11:41.489Z,1520669501.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:11:41.910Z,1520669501.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:11:42.311Z,1520669502.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:11:42.706Z,1520669502.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:11:43.091Z,1520669503.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 0.385643 seconds old.
2018-03-10T08:11:43.092Z,1520669503.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:11:43.093Z,1520669503.093 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 0.385703 seconds old.
2018-03-10T08:11:43.094Z,1520669503.094 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 0.385980 seconds old.
2018-03-10T08:11:43.486Z,1520669503.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:11:43.891Z,1520669503.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:11:44.295Z,1520669504.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:11:44.702Z,1520669504.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 0.407911 seconds old.
2018-03-10T08:11:44.719Z,1520669504.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:11:44.720Z,1520669504.720 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 0.424180 seconds old.
2018-03-10T08:11:44.721Z,1520669504.721 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 0.424493 seconds old.
2018-03-10T08:11:45.094Z,1520669505.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:11:45.490Z,1520669505.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:11:45.899Z,1520669505.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:11:46.294Z,1520669506.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 0.395518 seconds old.
2018-03-10T08:11:46.295Z,1520669506.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:11:46.296Z,1520669506.296 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 0.395833 seconds old.
2018-03-10T08:11:46.297Z,1520669506.297 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 0.396143 seconds old.
2018-03-10T08:11:46.705Z,1520669506.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 0.807201 seconds old.
2018-03-10T08:11:46.706Z,1520669506.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:11:46.723Z,1520669506.723 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 0.823437 seconds old.
2018-03-10T08:11:46.724Z,1520669506.724 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 0.823812 seconds old.
2018-03-10T08:11:47.094Z,1520669507.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 1.195720 seconds old.
2018-03-10T08:11:47.099Z,1520669507.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:11:47.100Z,1520669507.100 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 1.200243 seconds old.
2018-03-10T08:11:47.101Z,1520669507.101 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 1.200594 seconds old.
2018-03-10T08:11:47.496Z,1520669507.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:11:47.937Z,1520669507.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:11:48.310Z,1520669508.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:11:48.710Z,1520669508.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 0.400688 seconds old.
2018-03-10T08:11:48.716Z,1520669508.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:11:48.716Z,1520669508.716 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 0.397120 seconds old.
2018-03-10T08:11:48.717Z,1520669508.717 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 0.397380 seconds old.
2018-03-10T08:11:49.117Z,1520669509.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:11:49.505Z,1520669509.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:11:49.921Z,1520669509.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:11:50.306Z,1520669510.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 0.385658 seconds old.
2018-03-10T08:11:50.307Z,1520669510.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:11:50.308Z,1520669510.308 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 0.386201 seconds old.
2018-03-10T08:11:50.309Z,1520669510.309 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 0.386513 seconds old.
2018-03-10T08:11:50.712Z,1520669510.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 0.791981 seconds old.
2018-03-10T08:11:50.713Z,1520669510.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:11:50.714Z,1520669510.714 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 0.792306 seconds old.
2018-03-10T08:11:50.719Z,1520669510.719 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 0.792605 seconds old.
2018-03-10T08:11:51.125Z,1520669511.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:11:51.490Z,1520669511.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:11:51.916Z,1520669511.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:11:52.328Z,1520669512.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:11:52.717Z,1520669512.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:11:53.095Z,1520669513.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:11:53.519Z,1520669513.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:11:53.916Z,1520669513.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 0.397631 seconds old.
2018-03-10T08:11:53.917Z,1520669513.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:11:53.918Z,1520669513.918 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 0.397740 seconds old.
2018-03-10T08:11:53.919Z,1520669513.919 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 0.398240 seconds old.
2018-03-10T08:11:54.298Z,1520669514.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 0.779449 seconds old.
2018-03-10T08:11:54.299Z,1520669514.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:11:54.300Z,1520669514.300 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 0.779797 seconds old.
2018-03-10T08:11:54.301Z,1520669514.301 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 0.780096 seconds old.
2018-03-10T08:11:54.694Z,1520669514.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 1.175249 seconds old.
2018-03-10T08:11:54.695Z,1520669514.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:11:54.696Z,1520669514.696 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 1.175634 seconds old.
2018-03-10T08:11:54.697Z,1520669514.697 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 1.175933 seconds old.
2018-03-10T08:11:55.089Z,1520669515.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 1.570761 seconds old.
2018-03-10T08:11:55.090Z,1520669515.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:11:55.091Z,1520669515.091 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 1.571045 seconds old.
2018-03-10T08:11:55.092Z,1520669515.092 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 1.571360 seconds old.
2018-03-10T08:11:55.486Z,1520669515.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 1.967582 seconds old.
2018-03-10T08:11:55.487Z,1520669515.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:11:55.488Z,1520669515.488 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 1.967922 seconds old.
2018-03-10T08:11:55.489Z,1520669515.489 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 1.968220 seconds old.
2018-03-10T08:11:55.894Z,1520669515.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 2.375972 seconds old.
2018-03-10T08:11:55.896Z,1520669515.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:11:55.896Z,1520669515.896 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 2.376291 seconds old.
2018-03-10T08:11:55.897Z,1520669515.897 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 2.376577 seconds old.
2018-03-10T08:11:56.297Z,1520669516.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 2.778734 seconds old.
2018-03-10T08:11:56.298Z,1520669516.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:11:56.299Z,1520669516.299 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 2.779017 seconds old.
2018-03-10T08:11:56.300Z,1520669516.300 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 2.779328 seconds old.
2018-03-10T08:11:56.697Z,1520669516.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:11:57.091Z,1520669517.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 0.395556 seconds old.
2018-03-10T08:11:57.092Z,1520669517.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:11:57.093Z,1520669517.093 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 0.395855 seconds old.
2018-03-10T08:11:57.094Z,1520669517.094 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 0.396152 seconds old.
2018-03-10T08:11:57.493Z,1520669517.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 0.796668 seconds old.
2018-03-10T08:11:57.494Z,1520669517.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:11:57.494Z,1520669517.494 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 0.796973 seconds old.
2018-03-10T08:11:57.496Z,1520669517.496 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 0.797532 seconds old.
2018-03-10T08:12:00.623Z,1520669520.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:12:00.738Z,1520669520.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:12:01.131Z,1520669521.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:12:01.503Z,1520669521.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:12:01.907Z,1520669521.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:12:02.305Z,1520669522.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:12:02.702Z,1520669522.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:12:03.125Z,1520669523.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:12:03.527Z,1520669523.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:12:03.926Z,1520669523.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 0.399342 seconds old.
2018-03-10T08:12:03.932Z,1520669523.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:12:03.932Z,1520669523.932 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 0.404070 seconds old.
2018-03-10T08:12:03.934Z,1520669523.934 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 0.404435 seconds old.
2018-03-10T08:12:04.304Z,1520669524.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 0.777643 seconds old.
2018-03-10T08:12:04.305Z,1520669524.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:12:04.306Z,1520669524.306 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 0.777614 seconds old.
2018-03-10T08:12:04.307Z,1520669524.307 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 0.778129 seconds old.
2018-03-10T08:12:04.704Z,1520669524.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 1.177002 seconds old.
2018-03-10T08:12:04.704Z,1520669524.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:12:04.705Z,1520669524.705 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 1.176951 seconds old.
2018-03-10T08:12:04.706Z,1520669524.706 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 1.177245 seconds old.
2018-03-10T08:12:05.104Z,1520669525.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 1.577753 seconds old.
2018-03-10T08:12:05.105Z,1520669525.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:12:05.106Z,1520669525.106 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 1.577704 seconds old.
2018-03-10T08:12:05.107Z,1520669525.107 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 1.578212 seconds old.
2018-03-10T08:12:05.509Z,1520669525.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 1.982388 seconds old.
2018-03-10T08:12:05.510Z,1520669525.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:12:05.511Z,1520669525.511 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 1.982337 seconds old.
2018-03-10T08:12:05.512Z,1520669525.512 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 1.982875 seconds old.
2018-03-10T08:12:05.988Z,1520669525.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 2.461118 seconds old.
2018-03-10T08:12:05.989Z,1520669525.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:12:05.989Z,1520669525.989 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 2.461101 seconds old.
2018-03-10T08:12:05.991Z,1520669525.991 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 2.461406 seconds old.
2018-03-10T08:12:06.317Z,1520669526.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 2.790624 seconds old.
2018-03-10T08:12:06.318Z,1520669526.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:12:06.335Z,1520669526.335 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 2.806757 seconds old.
2018-03-10T08:12:06.336Z,1520669526.336 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 2.807152 seconds old.
2018-03-10T08:12:06.753Z,1520669526.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 3.226504 seconds old.
2018-03-10T08:12:06.754Z,1520669526.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:12:06.756Z,1520669526.756 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 3.227409 seconds old.
2018-03-10T08:12:06.757Z,1520669526.757 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 3.227763 seconds old.
2018-03-10T08:12:07.108Z,1520669527.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:12:07.509Z,1520669527.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:12:07.910Z,1520669527.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:12:08.314Z,1520669528.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:12:08.711Z,1520669528.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:12:09.109Z,1520669529.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:12:09.520Z,1520669529.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:12:09.910Z,1520669529.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 0.390553 seconds old.
2018-03-10T08:12:09.912Z,1520669529.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:12:09.913Z,1520669529.913 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 0.391197 seconds old.
2018-03-10T08:12:09.914Z,1520669529.914 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 0.391518 seconds old.
2018-03-10T08:12:10.315Z,1520669530.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 0.795602 seconds old.
2018-03-10T08:12:10.316Z,1520669530.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:12:10.317Z,1520669530.317 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 0.795929 seconds old.
2018-03-10T08:12:10.318Z,1520669530.318 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 0.796243 seconds old.
2018-03-10T08:12:10.726Z,1520669530.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:12:11.105Z,1520669531.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:12:11.503Z,1520669531.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:12:11.933Z,1520669531.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:12:12.327Z,1520669532.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:12:12.730Z,1520669532.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:12:13.102Z,1520669533.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 0.371785 seconds old.
2018-03-10T08:12:13.103Z,1520669533.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:12:13.104Z,1520669533.104 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 0.371734 seconds old.
2018-03-10T08:12:13.105Z,1520669533.105 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 0.372043 seconds old.
2018-03-10T08:12:13.506Z,1520669533.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:12:13.910Z,1520669533.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 0.404762 seconds old.
2018-03-10T08:12:13.911Z,1520669533.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:12:13.912Z,1520669533.912 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 0.405168 seconds old.
2018-03-10T08:12:13.913Z,1520669533.913 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 0.405461 seconds old.
2018-03-10T08:12:14.317Z,1520669534.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 0.811203 seconds old.
2018-03-10T08:12:14.318Z,1520669534.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:12:14.318Z,1520669534.318 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 0.811341 seconds old.
2018-03-10T08:12:14.343Z,1520669534.343 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 0.835621 seconds old.
2018-03-10T08:12:14.711Z,1520669534.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:12:15.106Z,1520669535.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:12:15.504Z,1520669535.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:12:15.937Z,1520669535.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:12:16.336Z,1520669536.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:12:16.740Z,1520669536.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 0.404310 seconds old.
2018-03-10T08:12:16.741Z,1520669536.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:12:16.742Z,1520669536.742 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 0.404725 seconds old.
2018-03-10T08:12:16.743Z,1520669536.743 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 0.405053 seconds old.
2018-03-10T08:12:17.108Z,1520669537.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:12:17.503Z,1520669537.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 0.395298 seconds old.
2018-03-10T08:12:17.504Z,1520669537.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:12:17.505Z,1520669537.505 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 0.395866 seconds old.
2018-03-10T08:12:17.506Z,1520669537.506 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 0.396205 seconds old.
2018-03-10T08:12:17.909Z,1520669537.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 0.801812 seconds old.
2018-03-10T08:12:17.910Z,1520669537.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:12:17.911Z,1520669537.911 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 0.802204 seconds old.
2018-03-10T08:12:17.912Z,1520669537.912 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 0.802581 seconds old.
2018-03-10T08:12:18.316Z,1520669538.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 1.208433 seconds old.
2018-03-10T08:12:18.317Z,1520669538.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:12:18.318Z,1520669538.318 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 1.208749 seconds old.
2018-03-10T08:12:18.339Z,1520669538.339 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 1.209080 seconds old.
2018-03-10T08:12:18.741Z,1520669538.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:12:19.105Z,1520669539.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:12:19.506Z,1520669539.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:12:19.915Z,1520669539.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 0.409694 seconds old.
2018-03-10T08:12:19.916Z,1520669539.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:12:19.917Z,1520669539.917 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 0.409913 seconds old.
2018-03-10T08:12:19.918Z,1520669539.918 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 0.410201 seconds old.
2018-03-10T08:12:20.313Z,1520669540.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 0.807812 seconds old.
2018-03-10T08:12:20.314Z,1520669540.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:12:20.315Z,1520669540.315 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 0.808050 seconds old.
2018-03-10T08:12:20.316Z,1520669540.316 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 0.808362 seconds old.
2018-03-10T08:12:20.712Z,1520669540.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 1.206909 seconds old.
2018-03-10T08:12:20.713Z,1520669540.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:12:20.714Z,1520669540.714 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 1.207041 seconds old.
2018-03-10T08:12:20.715Z,1520669540.715 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 1.207523 seconds old.
2018-03-10T08:12:21.108Z,1520669541.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 1.602234 seconds old.
2018-03-10T08:12:21.109Z,1520669541.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:12:21.110Z,1520669541.110 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 1.602383 seconds old.
2018-03-10T08:12:21.111Z,1520669541.111 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 1.602674 seconds old.
2018-03-10T08:12:21.504Z,1520669541.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:12:21.915Z,1520669541.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:12:22.314Z,1520669542.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:12:22.707Z,1520669542.707 [BPC1](ERROR): Failed to receive battery data
2018-03-10T08:12:22.708Z,1520669542.708 [BPC1] Communications Fault, FailCount= 1
2018-03-10T08:12:22.708Z,1520669542.708 [BPC1](ERROR): Communications Fault
2018-03-10T08:12:22.715Z,1520669542.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:12:22.756Z,1520669542.756 [CBIT](ERROR): Communications Fault in component: BPC1
2018-03-10T08:12:23.110Z,1520669543.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:12:23.506Z,1520669543.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:12:23.918Z,1520669543.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:12:23.956Z,1520669543.956 [CBIT](INFO): Clearing failed state for component BPC1
2018-03-10T08:12:23.956Z,1520669543.956 [BPC1] No Fault, FailCount= 1
2018-03-10T08:12:24.377Z,1520669544.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:12:24.718Z,1520669544.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:12:25.109Z,1520669545.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 0.390973 seconds old.
2018-03-10T08:12:25.110Z,1520669545.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:12:25.110Z,1520669545.110 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 0.391121 seconds old.
2018-03-10T08:12:25.111Z,1520669545.111 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 0.391501 seconds old.
2018-03-10T08:12:25.507Z,1520669545.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 0.789837 seconds old.
2018-03-10T08:12:25.508Z,1520669545.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:12:25.509Z,1520669545.509 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 0.789966 seconds old.
2018-03-10T08:12:25.510Z,1520669545.510 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 0.790278 seconds old.
2018-03-10T08:12:25.872Z,1520669545.872 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-03-10T08:12:25.872Z,1520669545.872 [NAL9602] Data Fault, FailCount= 2
2018-03-10T08:12:25.872Z,1520669545.872 [NAL9602](ERROR): Data Fault
2018-03-10T08:12:25.923Z,1520669545.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:12:25.948Z,1520669545.948 [CBIT](ERROR): Data Fault in component: NAL9602
2018-03-10T08:12:26.264Z,1520669546.264 [NAL9602](INFO): Powering down
2018-03-10T08:12:26.320Z,1520669546.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:12:26.711Z,1520669546.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 0.391134 seconds old.
2018-03-10T08:12:26.712Z,1520669546.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:12:26.713Z,1520669546.713 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 0.391773 seconds old.
2018-03-10T08:12:26.714Z,1520669546.714 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 0.392095 seconds old.
2018-03-10T08:12:27.120Z,1520669547.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:12:27.140Z,1520669547.140 [CBIT](INFO): Clearing failed state for component NAL9602
2018-03-10T08:12:27.140Z,1520669547.140 [NAL9602] No Fault, FailCount= 2
2018-03-10T08:12:27.512Z,1520669547.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 0.393123 seconds old.
2018-03-10T08:12:27.513Z,1520669547.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:12:27.514Z,1520669547.514 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 0.393260 seconds old.
2018-03-10T08:12:27.515Z,1520669547.515 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 0.393665 seconds old.
2018-03-10T08:12:27.920Z,1520669547.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:12:28.316Z,1520669548.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:12:28.717Z,1520669548.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:12:29.120Z,1520669549.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:12:29.513Z,1520669549.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:12:29.895Z,1520669549.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 0.382716 seconds old.
2018-03-10T08:12:29.896Z,1520669549.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:12:29.897Z,1520669549.897 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 0.383135 seconds old.
2018-03-10T08:12:29.898Z,1520669549.898 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 0.383455 seconds old.
2018-03-10T08:12:30.300Z,1520669550.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:12:30.725Z,1520669550.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:12:31.100Z,1520669551.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 0.375635 seconds old.
2018-03-10T08:12:31.101Z,1520669551.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:12:31.102Z,1520669551.102 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 0.375993 seconds old.
2018-03-10T08:12:31.103Z,1520669551.103 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 0.376309 seconds old.
2018-03-10T08:12:31.511Z,1520669551.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:12:31.905Z,1520669551.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:12:32.307Z,1520669552.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:12:32.706Z,1520669552.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 0.399912 seconds old.
2018-03-10T08:12:32.707Z,1520669552.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:12:32.708Z,1520669552.708 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 0.400444 seconds old.
2018-03-10T08:12:32.709Z,1520669552.709 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 0.400775 seconds old.
2018-03-10T08:12:33.103Z,1520669553.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 0.796442 seconds old.
2018-03-10T08:12:33.104Z,1520669553.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:12:33.105Z,1520669553.105 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 0.796928 seconds old.
2018-03-10T08:12:33.106Z,1520669553.106 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 0.797264 seconds old.
2018-03-10T08:12:33.504Z,1520669553.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 1.197669 seconds old.
2018-03-10T08:12:33.505Z,1520669553.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:12:33.506Z,1520669553.506 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 1.197910 seconds old.
2018-03-10T08:12:33.507Z,1520669553.507 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 1.198216 seconds old.
2018-03-10T08:12:33.908Z,1520669553.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 1.602030 seconds old.
2018-03-10T08:12:33.909Z,1520669553.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:12:33.910Z,1520669553.910 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 1.602281 seconds old.
2018-03-10T08:12:33.911Z,1520669553.911 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 1.602806 seconds old.
2018-03-10T08:12:34.307Z,1520669554.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 2.001159 seconds old.
2018-03-10T08:12:34.308Z,1520669554.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:12:34.309Z,1520669554.309 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 2.001405 seconds old.
2018-03-10T08:12:34.310Z,1520669554.310 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 2.001719 seconds old.
2018-03-10T08:12:34.709Z,1520669554.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:12:35.100Z,1520669555.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:12:35.509Z,1520669555.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:12:35.909Z,1520669555.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:12:36.304Z,1520669556.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 0.395248 seconds old.
2018-03-10T08:12:36.305Z,1520669556.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:12:36.305Z,1520669556.305 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 0.395661 seconds old.
2018-03-10T08:12:36.307Z,1520669556.307 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 0.395975 seconds old.
2018-03-10T08:12:36.704Z,1520669556.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 0.795812 seconds old.
2018-03-10T08:12:36.705Z,1520669556.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:12:36.706Z,1520669556.706 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 0.796118 seconds old.
2018-03-10T08:12:36.707Z,1520669556.707 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 0.796641 seconds old.
2018-03-10T08:12:37.106Z,1520669557.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 1.197919 seconds old.
2018-03-10T08:12:37.107Z,1520669557.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:12:37.108Z,1520669557.108 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 1.198321 seconds old.
2018-03-10T08:12:37.109Z,1520669557.109 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 1.198645 seconds old.
2018-03-10T08:12:37.500Z,1520669557.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 1.591981 seconds old.
2018-03-10T08:12:37.501Z,1520669557.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:12:37.502Z,1520669557.502 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 1.592296 seconds old.
2018-03-10T08:12:37.503Z,1520669557.503 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 1.592823 seconds old.
2018-03-10T08:12:37.911Z,1520669557.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 2.003037 seconds old.
2018-03-10T08:12:37.912Z,1520669557.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:12:37.913Z,1520669557.913 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 2.003369 seconds old.
2018-03-10T08:12:37.914Z,1520669557.914 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 2.003694 seconds old.
2018-03-10T08:12:38.308Z,1520669558.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:12:38.707Z,1520669558.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:12:39.104Z,1520669559.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:12:39.503Z,1520669559.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:12:39.903Z,1520669559.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:12:40.313Z,1520669560.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:12:40.706Z,1520669560.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:12:41.103Z,1520669561.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:12:41.508Z,1520669561.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:12:41.907Z,1520669561.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:12:42.301Z,1520669562.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:12:42.712Z,1520669562.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 0.411252 seconds old.
2018-03-10T08:12:42.713Z,1520669562.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:12:42.713Z,1520669562.713 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 0.411665 seconds old.
2018-03-10T08:12:42.714Z,1520669562.714 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 0.411986 seconds old.
2018-03-10T08:12:43.106Z,1520669563.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 0.805570 seconds old.
2018-03-10T08:12:43.107Z,1520669563.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:12:43.108Z,1520669563.108 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 0.805979 seconds old.
2018-03-10T08:12:43.109Z,1520669563.109 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 0.806306 seconds old.
2018-03-10T08:12:43.501Z,1520669563.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 1.201262 seconds old.
2018-03-10T08:12:43.502Z,1520669563.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:12:43.503Z,1520669563.503 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 1.201740 seconds old.
2018-03-10T08:12:43.504Z,1520669563.504 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 1.202075 seconds old.
2018-03-10T08:12:43.904Z,1520669563.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 1.604023 seconds old.
2018-03-10T08:12:43.905Z,1520669563.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:12:43.906Z,1520669563.906 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 1.604329 seconds old.
2018-03-10T08:12:43.907Z,1520669563.907 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 1.604838 seconds old.
2018-03-10T08:12:44.306Z,1520669564.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 2.005541 seconds old.
2018-03-10T08:12:44.307Z,1520669564.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:12:44.308Z,1520669564.308 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 2.005912 seconds old.
2018-03-10T08:12:44.309Z,1520669564.309 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 2.006241 seconds old.
2018-03-10T08:12:44.705Z,1520669564.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 2.404980 seconds old.
2018-03-10T08:12:44.706Z,1520669564.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:12:44.707Z,1520669564.707 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 2.405485 seconds old.
2018-03-10T08:12:44.708Z,1520669564.708 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 2.405843 seconds old.
2018-03-10T08:12:45.107Z,1520669565.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 2.807329 seconds old.
2018-03-10T08:12:45.108Z,1520669565.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:12:45.109Z,1520669565.109 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 2.807612 seconds old.
2018-03-10T08:12:45.110Z,1520669565.110 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 2.807922 seconds old.
2018-03-10T08:12:45.505Z,1520669565.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 3.204882 seconds old.
2018-03-10T08:12:45.506Z,1520669565.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:12:45.507Z,1520669565.507 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 3.205252 seconds old.
2018-03-10T08:12:45.508Z,1520669565.508 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 3.205591 seconds old.
2018-03-10T08:12:45.906Z,1520669565.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 3.606042 seconds old.
2018-03-10T08:12:45.907Z,1520669565.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:12:45.908Z,1520669565.908 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 3.606552 seconds old.
2018-03-10T08:12:45.909Z,1520669565.909 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 3.606871 seconds old.
2018-03-10T08:12:46.302Z,1520669566.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 4.001978 seconds old.
2018-03-10T08:12:46.303Z,1520669566.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:12:46.304Z,1520669566.304 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 4.002476 seconds old.
2018-03-10T08:12:46.305Z,1520669566.305 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 4.002781 seconds old.
2018-03-10T08:12:46.702Z,1520669566.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 4.402293 seconds old.
2018-03-10T08:12:46.703Z,1520669566.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:12:46.704Z,1520669566.704 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 4.402631 seconds old.
2018-03-10T08:12:46.705Z,1520669566.705 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 4.402922 seconds old.
2018-03-10T08:12:47.101Z,1520669567.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 4.800361 seconds old.
2018-03-10T08:12:47.101Z,1520669567.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:12:47.102Z,1520669567.102 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 4.800645 seconds old.
2018-03-10T08:12:47.104Z,1520669567.104 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 4.801145 seconds old.
2018-03-10T08:12:47.507Z,1520669567.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 5.207240 seconds old.
2018-03-10T08:12:47.508Z,1520669567.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:12:47.509Z,1520669567.509 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 5.207515 seconds old.
2018-03-10T08:12:47.510Z,1520669567.510 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 5.207801 seconds old.
2018-03-10T08:12:47.905Z,1520669567.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 5.605303 seconds old.
2018-03-10T08:12:47.906Z,1520669567.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:12:47.907Z,1520669567.907 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 5.605657 seconds old.
2018-03-10T08:12:47.908Z,1520669567.908 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 5.605956 seconds old.
2018-03-10T08:12:48.303Z,1520669568.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:12:48.705Z,1520669568.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:12:49.103Z,1520669569.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:12:49.501Z,1520669569.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:12:49.909Z,1520669569.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:12:50.303Z,1520669570.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:12:50.704Z,1520669570.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 0.401949 seconds old.
2018-03-10T08:12:50.705Z,1520669570.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:12:50.706Z,1520669570.706 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 0.402003 seconds old.
2018-03-10T08:12:50.707Z,1520669570.707 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 0.402491 seconds old.
2018-03-10T08:12:51.106Z,1520669571.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 0.804025 seconds old.
2018-03-10T08:12:51.107Z,1520669571.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:12:51.108Z,1520669571.108 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 0.804319 seconds old.
2018-03-10T08:12:51.109Z,1520669571.109 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 0.804624 seconds old.
2018-03-10T08:12:51.507Z,1520669571.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:12:51.907Z,1520669571.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 0.400444 seconds old.
2018-03-10T08:12:51.908Z,1520669571.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:12:51.909Z,1520669571.909 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 0.400898 seconds old.
2018-03-10T08:12:51.910Z,1520669571.910 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 0.401200 seconds old.
2018-03-10T08:12:52.308Z,1520669572.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:12:52.703Z,1520669572.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 0.395174 seconds old.
2018-03-10T08:12:52.704Z,1520669572.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:12:52.705Z,1520669572.705 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 0.395501 seconds old.
2018-03-10T08:12:52.706Z,1520669572.706 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 0.395806 seconds old.
2018-03-10T08:12:53.102Z,1520669573.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:12:53.506Z,1520669573.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 0.404707 seconds old.
2018-03-10T08:12:53.508Z,1520669573.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:12:53.508Z,1520669573.508 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 0.405029 seconds old.
2018-03-10T08:12:53.509Z,1520669573.509 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 0.405313 seconds old.
2018-03-10T08:12:53.908Z,1520669573.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:12:54.303Z,1520669574.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:12:54.705Z,1520669574.705 [BPC1](FAULT): Failed to initialize
2018-03-10T08:12:54.705Z,1520669574.705 [BPC1] Communications Fault, FailCount= 2
2018-03-10T08:12:54.705Z,1520669574.705 [BPC1](ERROR): Communications Fault
2018-03-10T08:12:54.717Z,1520669574.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:12:54.758Z,1520669574.758 [CBIT](ERROR): Communications Fault in component: BPC1
2018-03-10T08:12:55.107Z,1520669575.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:12:55.506Z,1520669575.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 0.399143 seconds old.
2018-03-10T08:12:55.511Z,1520669575.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:12:55.512Z,1520669575.512 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 0.403594 seconds old.
2018-03-10T08:12:55.513Z,1520669575.513 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 0.403940 seconds old.
2018-03-10T08:12:55.912Z,1520669575.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:12:55.925Z,1520669575.925 [CBIT](INFO): Clearing failed state for component BPC1
2018-03-10T08:12:55.925Z,1520669575.925 [BPC1] No Fault, FailCount= 2
2018-03-10T08:12:56.345Z,1520669576.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:12:56.668Z,1520669576.668 [NAL9602](INFO): Powering up NAL9602
2018-03-10T08:12:56.713Z,1520669576.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:12:57.106Z,1520669577.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:12:57.502Z,1520669577.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 0.397179 seconds old.
2018-03-10T08:12:57.504Z,1520669577.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:12:57.505Z,1520669577.505 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 0.398388 seconds old.
2018-03-10T08:12:57.506Z,1520669577.506 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 0.398491 seconds old.
2018-03-10T08:13:00.602Z,1520669580.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:13:00.729Z,1520669580.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:13:01.076Z,1520669581.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:13:01.472Z,1520669581.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 0.397127 seconds old.
2018-03-10T08:13:01.473Z,1520669581.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:13:01.474Z,1520669581.474 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 0.397277 seconds old.
2018-03-10T08:13:01.475Z,1520669581.475 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 0.397682 seconds old.
2018-03-10T08:13:01.876Z,1520669581.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 0.800710 seconds old.
2018-03-10T08:13:01.876Z,1520669581.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:13:01.877Z,1520669581.877 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 0.800832 seconds old.
2018-03-10T08:13:01.878Z,1520669581.878 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 0.801169 seconds old.
2018-03-10T08:13:02.280Z,1520669582.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 1.204916 seconds old.
2018-03-10T08:13:02.281Z,1520669582.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:13:02.282Z,1520669582.282 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 1.205055 seconds old.
2018-03-10T08:13:02.287Z,1520669582.287 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 1.205380 seconds old.
2018-03-10T08:13:02.672Z,1520669582.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:13:03.081Z,1520669583.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:13:03.476Z,1520669583.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:13:03.874Z,1520669583.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 0.398609 seconds old.
2018-03-10T08:13:03.875Z,1520669583.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:13:03.876Z,1520669583.876 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 0.399067 seconds old.
2018-03-10T08:13:03.877Z,1520669583.877 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 0.399409 seconds old.
2018-03-10T08:13:04.283Z,1520669584.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 0.807906 seconds old.
2018-03-10T08:13:04.284Z,1520669584.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:13:04.285Z,1520669584.285 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 0.808236 seconds old.
2018-03-10T08:13:04.286Z,1520669584.286 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 0.808561 seconds old.
2018-03-10T08:13:04.677Z,1520669584.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 1.201956 seconds old.
2018-03-10T08:13:04.678Z,1520669584.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:13:04.679Z,1520669584.679 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 1.202475 seconds old.
2018-03-10T08:13:04.680Z,1520669584.680 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 1.202847 seconds old.
2018-03-10T08:13:05.071Z,1520669585.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:13:05.481Z,1520669585.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:13:05.877Z,1520669585.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:13:06.280Z,1520669586.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:13:06.678Z,1520669586.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 0.399004 seconds old.
2018-03-10T08:13:06.679Z,1520669586.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:13:06.680Z,1520669586.680 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 0.399637 seconds old.
2018-03-10T08:13:06.681Z,1520669586.681 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 0.399979 seconds old.
2018-03-10T08:13:07.074Z,1520669587.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 0.794818 seconds old.
2018-03-10T08:13:07.075Z,1520669587.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:13:07.076Z,1520669587.076 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 0.795386 seconds old.
2018-03-10T08:13:07.077Z,1520669587.077 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 0.795727 seconds old.
2018-03-10T08:13:07.480Z,1520669587.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 1.200757 seconds old.
2018-03-10T08:13:07.481Z,1520669587.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:13:07.482Z,1520669587.482 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 1.201068 seconds old.
2018-03-10T08:13:07.483Z,1520669587.483 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 1.201382 seconds old.
2018-03-10T08:13:07.850Z,1520669587.850 [NAL9602](INFO): NAL9602 initialized
2018-03-10T08:13:07.895Z,1520669587.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 1.611468 seconds old.
2018-03-10T08:13:07.896Z,1520669587.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:13:07.897Z,1520669587.897 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 1.616224 seconds old.
2018-03-10T08:13:07.898Z,1520669587.898 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 1.616569 seconds old.
2018-03-10T08:13:08.278Z,1520669588.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 1.998692 seconds old.
2018-03-10T08:13:08.279Z,1520669588.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:13:08.280Z,1520669588.280 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 1.999257 seconds old.
2018-03-10T08:13:08.281Z,1520669588.281 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 1.999598 seconds old.
2018-03-10T08:13:08.682Z,1520669588.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 2.403219 seconds old.
2018-03-10T08:13:08.683Z,1520669588.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:13:08.684Z,1520669588.684 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 2.403719 seconds old.
2018-03-10T08:13:08.685Z,1520669588.685 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 2.404047 seconds old.
2018-03-10T08:13:09.085Z,1520669589.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:13:09.485Z,1520669589.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:13:09.881Z,1520669589.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:13:10.274Z,1520669590.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:13:10.678Z,1520669590.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:13:11.082Z,1520669591.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:13:11.479Z,1520669591.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:13:11.893Z,1520669591.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:13:12.289Z,1520669592.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:13:12.685Z,1520669592.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:13:13.085Z,1520669593.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:13:13.477Z,1520669593.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:13:13.882Z,1520669593.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 0.405558 seconds old.
2018-03-10T08:13:13.883Z,1520669593.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:13:13.884Z,1520669593.884 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 0.406201 seconds old.
2018-03-10T08:13:13.885Z,1520669593.885 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 0.406554 seconds old.
2018-03-10T08:13:14.291Z,1520669594.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 0.815394 seconds old.
2018-03-10T08:13:14.292Z,1520669594.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:13:14.293Z,1520669594.293 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 0.815703 seconds old.
2018-03-10T08:13:14.294Z,1520669594.294 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 0.816036 seconds old.
2018-03-10T08:13:14.691Z,1520669594.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 1.215302 seconds old.
2018-03-10T08:13:14.692Z,1520669594.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:13:14.693Z,1520669594.693 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 1.215579 seconds old.
2018-03-10T08:13:14.694Z,1520669594.694 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 1.215908 seconds old.
2018-03-10T08:13:15.084Z,1520669595.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 1.608385 seconds old.
2018-03-10T08:13:15.085Z,1520669595.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:13:15.086Z,1520669595.086 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 1.608657 seconds old.
2018-03-10T08:13:15.087Z,1520669595.087 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 1.609203 seconds old.
2018-03-10T08:13:15.492Z,1520669595.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 2.016035 seconds old.
2018-03-10T08:13:15.493Z,1520669595.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:13:15.494Z,1520669595.494 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 2.016314 seconds old.
2018-03-10T08:13:15.495Z,1520669595.495 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 2.017000 seconds old.
2018-03-10T08:13:15.881Z,1520669595.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:13:16.279Z,1520669596.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:13:16.690Z,1520669596.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 0.412126 seconds old.
2018-03-10T08:13:16.692Z,1520669596.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:13:16.693Z,1520669596.693 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 0.413302 seconds old.
2018-03-10T08:13:16.694Z,1520669596.694 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 0.413627 seconds old.
2018-03-10T08:13:17.081Z,1520669597.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 0.802813 seconds old.
2018-03-10T08:13:17.082Z,1520669597.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:13:17.083Z,1520669597.083 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 0.802938 seconds old.
2018-03-10T08:13:17.084Z,1520669597.084 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 0.803272 seconds old.
2018-03-10T08:13:17.492Z,1520669597.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:13:17.891Z,1520669597.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:13:18.286Z,1520669598.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:13:18.680Z,1520669598.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:13:19.089Z,1520669599.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:13:19.482Z,1520669599.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 0.393907 seconds old.
2018-03-10T08:13:19.483Z,1520669599.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:13:19.484Z,1520669599.484 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 0.394411 seconds old.
2018-03-10T08:13:19.485Z,1520669599.485 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 0.394749 seconds old.
2018-03-10T08:13:19.881Z,1520669599.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 0.793271 seconds old.
2018-03-10T08:13:19.882Z,1520669599.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:13:19.883Z,1520669599.883 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 0.793785 seconds old.
2018-03-10T08:13:19.884Z,1520669599.884 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 0.794153 seconds old.
2018-03-10T08:13:20.296Z,1520669600.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 1.207566 seconds old.
2018-03-10T08:13:20.297Z,1520669600.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:13:20.297Z,1520669600.297 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 1.207868 seconds old.
2018-03-10T08:13:20.298Z,1520669600.298 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 1.208201 seconds old.
2018-03-10T08:13:20.695Z,1520669600.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 1.607264 seconds old.
2018-03-10T08:13:20.696Z,1520669600.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:13:20.697Z,1520669600.697 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 1.607613 seconds old.
2018-03-10T08:13:20.698Z,1520669600.698 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 1.607942 seconds old.
2018-03-10T08:13:21.092Z,1520669601.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:13:21.483Z,1520669601.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:13:21.883Z,1520669601.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:13:22.281Z,1520669602.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:13:22.692Z,1520669602.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:13:23.088Z,1520669603.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:13:23.478Z,1520669603.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 0.390750 seconds old.
2018-03-10T08:13:23.483Z,1520669603.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:13:23.484Z,1520669603.484 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 0.395459 seconds old.
2018-03-10T08:13:23.485Z,1520669603.485 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 0.395831 seconds old.
2018-03-10T08:13:23.874Z,1520669603.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 0.787269 seconds old.
2018-03-10T08:13:23.876Z,1520669603.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:13:23.876Z,1520669603.876 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 0.787821 seconds old.
2018-03-10T08:13:23.877Z,1520669603.877 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 0.788152 seconds old.
2018-03-10T08:13:24.272Z,1520669604.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 1.184588 seconds old.
2018-03-10T08:13:24.273Z,1520669604.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:13:24.273Z,1520669604.273 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 1.184894 seconds old.
2018-03-10T08:13:24.275Z,1520669604.275 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 1.185225 seconds old.
2018-03-10T08:13:24.669Z,1520669604.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 1.582389 seconds old.
2018-03-10T08:13:24.670Z,1520669604.670 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:13:24.671Z,1520669604.671 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 59
2018-03-10T08:13:24.671Z,1520669604.671 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-03-10T08:13:24.672Z,1520669604.672 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 1.583433 seconds old.
2018-03-10T08:13:24.673Z,1520669604.673 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:13:24.673Z,1520669604.673 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 59
2018-03-10T08:13:24.673Z,1520669604.673 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-03-10T08:13:24.674Z,1520669604.674 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 1.584860 seconds old.
2018-03-10T08:13:24.675Z,1520669604.675 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:13:24.675Z,1520669604.675 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 59
2018-03-10T08:13:24.675Z,1520669604.675 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-10T08:13:24.707Z,1520669604.707 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-03-10T08:13:24.707Z,1520669604.707 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-03-10T08:13:24.708Z,1520669604.708 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-10T08:13:25.114Z,1520669605.114 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-03-10T08:13:25.119Z,1520669605.119 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 59
2018-03-10T08:13:25.119Z,1520669605.119 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-03-10T08:13:25.119Z,1520669605.119 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 59
2018-03-10T08:13:25.120Z,1520669605.120 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-10T08:13:25.120Z,1520669605.120 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 59
2018-03-10T08:13:25.484Z,1520669605.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-03-10T08:13:25.485Z,1520669605.485 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-03-10T08:13:25.485Z,1520669605.485 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-03-10T08:13:25.485Z,1520669605.485 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-03-10T08:13:25.486Z,1520669605.486 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-03-10T08:13:25.486Z,1520669605.486 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-03-10T08:13:25.486Z,1520669605.486 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-10T08:13:25.487Z,1520669605.487 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-10T08:13:25.487Z,1520669605.487 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-10T08:13:25.880Z,1520669605.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-03-10T08:13:25.881Z,1520669605.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:13:26.277Z,1520669606.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-03-10T08:13:26.278Z,1520669606.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:13:26.678Z,1520669606.678 [BPC1](FAULT): Failed to initialize
2018-03-10T08:13:26.678Z,1520669606.678 [BPC1] Communications Fault, FailCount= 3
2018-03-10T08:13:26.678Z,1520669606.678 [BPC1](ERROR): Communications Fault
2018-03-10T08:13:26.684Z,1520669606.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 0.407087 seconds old.
2018-03-10T08:13:26.684Z,1520669606.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-03-10T08:13:26.685Z,1520669606.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:13:26.686Z,1520669606.686 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 0.407322 seconds old.
2018-03-10T08:13:26.687Z,1520669606.687 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 0.403489 seconds old.
2018-03-10T08:13:26.699Z,1520669606.699 [CBIT](ERROR): Communications Fault in component: BPC1
2018-03-10T08:13:27.079Z,1520669607.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 0.801983 seconds old.
2018-03-10T08:13:27.079Z,1520669607.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-03-10T08:13:27.080Z,1520669607.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:13:27.081Z,1520669607.081 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 0.802473 seconds old.
2018-03-10T08:13:27.082Z,1520669607.082 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 0.798571 seconds old.
2018-03-10T08:13:27.485Z,1520669607.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-03-10T08:13:27.486Z,1520669607.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:13:27.886Z,1520669607.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-03-10T08:13:27.887Z,1520669607.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:13:27.900Z,1520669607.900 [CBIT](INFO): Clearing failed state for component BPC1
2018-03-10T08:13:27.900Z,1520669607.900 [BPC1] No Fault, FailCount= 3
2018-03-10T08:13:28.336Z,1520669608.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.7 s old, using for 20.0 s.
2018-03-10T08:13:28.337Z,1520669608.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:13:28.676Z,1520669608.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-03-10T08:13:28.677Z,1520669608.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:13:29.086Z,1520669609.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 0.410193 seconds old.
2018-03-10T08:13:29.086Z,1520669609.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-03-10T08:13:29.087Z,1520669609.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:13:29.088Z,1520669609.088 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 0.410526 seconds old.
2018-03-10T08:13:29.089Z,1520669609.089 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 0.410851 seconds old.
2018-03-10T08:13:29.479Z,1520669609.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 0.804081 seconds old.
2018-03-10T08:13:29.480Z,1520669609.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-03-10T08:13:29.481Z,1520669609.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:13:29.482Z,1520669609.482 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 0.804341 seconds old.
2018-03-10T08:13:29.487Z,1520669609.487 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 0.808845 seconds old.
2018-03-10T08:13:29.881Z,1520669609.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 1.205336 seconds old.
2018-03-10T08:13:29.881Z,1520669609.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-03-10T08:13:29.882Z,1520669609.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:13:29.883Z,1520669609.883 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 1.205778 seconds old.
2018-03-10T08:13:29.884Z,1520669609.884 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 1.206120 seconds old.
2018-03-10T08:13:30.283Z,1520669610.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 1.607207 seconds old.
2018-03-10T08:13:30.283Z,1520669610.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-03-10T08:13:30.284Z,1520669610.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:13:30.285Z,1520669610.285 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 1.607785 seconds old.
2018-03-10T08:13:30.286Z,1520669610.286 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 1.608114 seconds old.
2018-03-10T08:13:30.686Z,1520669610.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 2.010268 seconds old.
2018-03-10T08:13:30.686Z,1520669610.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-03-10T08:13:30.687Z,1520669610.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:13:30.688Z,1520669610.688 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 2.010729 seconds old.
2018-03-10T08:13:30.689Z,1520669610.689 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 2.011048 seconds old.
2018-03-10T08:13:31.086Z,1520669611.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-03-10T08:13:31.088Z,1520669611.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:13:31.487Z,1520669611.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-03-10T08:13:31.488Z,1520669611.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:13:31.881Z,1520669611.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 0.394723 seconds old.
2018-03-10T08:13:31.882Z,1520669611.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-03-10T08:13:31.883Z,1520669611.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:13:31.884Z,1520669611.884 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 0.395194 seconds old.
2018-03-10T08:13:31.885Z,1520669611.885 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 0.395531 seconds old.
2018-03-10T08:13:32.265Z,1520669612.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-03-10T08:13:32.266Z,1520669612.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:13:32.668Z,1520669612.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-03-10T08:13:32.668Z,1520669612.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:13:33.087Z,1520669613.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-03-10T08:13:33.088Z,1520669613.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:13:33.496Z,1520669613.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-03-10T08:13:33.497Z,1520669613.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:13:33.890Z,1520669613.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-03-10T08:13:33.891Z,1520669613.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:13:34.290Z,1520669614.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-03-10T08:13:34.291Z,1520669614.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:13:34.696Z,1520669614.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-03-10T08:13:34.697Z,1520669614.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:13:35.089Z,1520669615.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-03-10T08:13:35.090Z,1520669615.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:13:35.468Z,1520669615.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-03-10T08:13:35.469Z,1520669615.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:13:35.870Z,1520669615.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-03-10T08:13:35.871Z,1520669615.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:13:36.274Z,1520669616.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-03-10T08:13:36.298Z,1520669616.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:13:36.674Z,1520669616.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-03-10T08:13:36.674Z,1520669616.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:13:37.100Z,1520669617.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-03-10T08:13:37.101Z,1520669617.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:13:37.494Z,1520669617.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-03-10T08:13:37.495Z,1520669617.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:13:37.874Z,1520669617.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-03-10T08:13:37.876Z,1520669617.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:13:38.270Z,1520669618.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-03-10T08:13:38.272Z,1520669618.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:13:38.673Z,1520669618.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-03-10T08:13:38.674Z,1520669618.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:13:39.070Z,1520669619.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-03-10T08:13:39.071Z,1520669619.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:13:39.499Z,1520669619.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-03-10T08:13:39.500Z,1520669619.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:13:39.902Z,1520669619.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-03-10T08:13:39.903Z,1520669619.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:13:40.274Z,1520669620.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-03-10T08:13:40.275Z,1520669620.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:13:40.673Z,1520669620.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-03-10T08:13:40.674Z,1520669620.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:13:41.075Z,1520669621.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-03-10T08:13:41.076Z,1520669621.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:13:41.469Z,1520669621.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-03-10T08:13:41.470Z,1520669621.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:13:41.880Z,1520669621.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-03-10T08:13:41.881Z,1520669621.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:13:42.273Z,1520669622.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-03-10T08:13:42.273Z,1520669622.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:13:42.677Z,1520669622.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-03-10T08:13:42.678Z,1520669622.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:13:43.086Z,1520669623.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2018-03-10T08:13:43.107Z,1520669623.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:13:43.488Z,1520669623.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2018-03-10T08:13:43.489Z,1520669623.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:13:43.874Z,1520669623.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2018-03-10T08:13:43.875Z,1520669623.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:13:44.277Z,1520669624.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2018-03-10T08:13:44.278Z,1520669624.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:13:44.681Z,1520669624.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:13:45.082Z,1520669625.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:13:45.479Z,1520669625.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:13:45.884Z,1520669625.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:13:46.286Z,1520669626.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:13:46.679Z,1520669626.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:13:47.078Z,1520669627.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:13:47.480Z,1520669627.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:13:47.881Z,1520669627.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:13:48.272Z,1520669628.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:13:48.683Z,1520669628.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:13:49.093Z,1520669629.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:13:49.488Z,1520669629.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:13:49.881Z,1520669629.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:13:50.277Z,1520669630.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:13:50.685Z,1520669630.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:13:51.078Z,1520669631.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:13:51.490Z,1520669631.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:13:51.883Z,1520669631.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:13:52.291Z,1520669632.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:13:52.680Z,1520669632.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:13:53.077Z,1520669633.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:13:53.474Z,1520669633.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:13:53.882Z,1520669633.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:13:54.271Z,1520669634.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:13:54.684Z,1520669634.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:13:55.088Z,1520669635.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:13:55.489Z,1520669635.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:13:55.886Z,1520669635.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:13:56.283Z,1520669636.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:13:56.684Z,1520669636.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:13:57.088Z,1520669637.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:13:57.501Z,1520669637.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:13:57.896Z,1520669637.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:14:00.975Z,1520669640.975 [BPC1](FAULT): Failed to initialize
2018-03-10T08:14:00.975Z,1520669640.975 [BPC1] Communications Fault, FailCount= 4
2018-03-10T08:14:00.975Z,1520669640.975 [BPC1](ERROR): Communications Fault
2018-03-10T08:14:00.989Z,1520669640.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:14:01.002Z,1520669641.002 [CBIT](ERROR): Communications Fault in component: BPC1
2018-03-10T08:14:01.124Z,1520669641.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:14:01.465Z,1520669641.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:14:01.889Z,1520669641.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:14:01.902Z,1520669641.902 [CBIT](INFO): Clearing failed state for component BPC1
2018-03-10T08:14:01.903Z,1520669641.903 [BPC1] No Fault, FailCount= 4
2018-03-10T08:14:02.332Z,1520669642.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:14:02.686Z,1520669642.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:14:03.085Z,1520669643.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:14:03.487Z,1520669643.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:14:03.864Z,1520669643.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:14:04.259Z,1520669644.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:14:04.665Z,1520669644.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:14:05.088Z,1520669645.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:14:05.500Z,1520669645.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 0.412246 seconds old.
2018-03-10T08:14:05.501Z,1520669645.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:14:05.502Z,1520669645.502 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 0.412670 seconds old.
2018-03-10T08:14:05.503Z,1520669645.503 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 0.413048 seconds old.
2018-03-10T08:14:05.879Z,1520669645.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:14:06.266Z,1520669646.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:14:06.669Z,1520669646.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:14:07.063Z,1520669647.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 0.395040 seconds old.
2018-03-10T08:14:07.064Z,1520669647.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:14:07.065Z,1520669647.065 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 0.395435 seconds old.
2018-03-10T08:14:07.066Z,1520669647.066 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 0.395766 seconds old.
2018-03-10T08:14:07.466Z,1520669647.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 0.797502 seconds old.
2018-03-10T08:14:07.467Z,1520669647.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:14:07.468Z,1520669647.468 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 0.798091 seconds old.
2018-03-10T08:14:07.469Z,1520669647.469 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 0.798445 seconds old.
2018-03-10T08:14:07.861Z,1520669647.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 1.192397 seconds old.
2018-03-10T08:14:07.862Z,1520669647.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:14:07.863Z,1520669647.863 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 1.192724 seconds old.
2018-03-10T08:14:07.864Z,1520669647.864 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 1.193272 seconds old.
2018-03-10T08:14:08.266Z,1520669648.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 1.597718 seconds old.
2018-03-10T08:14:08.267Z,1520669648.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:14:08.268Z,1520669648.268 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 1.598316 seconds old.
2018-03-10T08:14:08.269Z,1520669648.269 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 1.598665 seconds old.
2018-03-10T08:14:08.673Z,1520669648.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:14:09.077Z,1520669649.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:14:09.471Z,1520669649.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:14:09.868Z,1520669649.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:14:10.268Z,1520669650.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:14:10.666Z,1520669650.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:14:11.068Z,1520669651.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:14:11.469Z,1520669651.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:14:11.872Z,1520669651.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 0.403209 seconds old.
2018-03-10T08:14:11.873Z,1520669651.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:14:11.874Z,1520669651.874 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 0.403628 seconds old.
2018-03-10T08:14:11.875Z,1520669651.875 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 0.403960 seconds old.
2018-03-10T08:14:12.275Z,1520669652.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:14:12.673Z,1520669652.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:14:13.069Z,1520669653.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:14:13.468Z,1520669653.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:14:13.869Z,1520669653.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:14:14.267Z,1520669654.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:14:14.674Z,1520669654.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:14:15.072Z,1520669655.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 0.399003 seconds old.
2018-03-10T08:14:15.073Z,1520669655.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:14:15.074Z,1520669655.074 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 0.399400 seconds old.
2018-03-10T08:14:15.075Z,1520669655.075 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 0.399700 seconds old.
2018-03-10T08:14:15.475Z,1520669655.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 0.802405 seconds old.
2018-03-10T08:14:15.476Z,1520669655.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:14:15.477Z,1520669655.477 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 0.802699 seconds old.
2018-03-10T08:14:15.478Z,1520669655.478 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 0.802792 seconds old.
2018-03-10T08:14:15.871Z,1520669655.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 1.198423 seconds old.
2018-03-10T08:14:15.872Z,1520669655.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:14:15.873Z,1520669655.873 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 1.198721 seconds old.
2018-03-10T08:14:15.874Z,1520669655.874 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 1.198809 seconds old.
2018-03-10T08:14:16.266Z,1520669656.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 1.593322 seconds old.
2018-03-10T08:14:16.268Z,1520669656.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:14:16.268Z,1520669656.268 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 1.593881 seconds old.
2018-03-10T08:14:16.269Z,1520669656.269 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 1.593964 seconds old.
2018-03-10T08:14:16.667Z,1520669656.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:14:17.069Z,1520669657.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:14:17.481Z,1520669657.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:14:17.874Z,1520669657.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:14:18.301Z,1520669658.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:14:18.671Z,1520669658.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:14:19.061Z,1520669659.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:14:19.477Z,1520669659.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:14:19.869Z,1520669659.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:14:20.264Z,1520669660.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:14:20.675Z,1520669660.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:14:21.101Z,1520669661.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:14:21.477Z,1520669661.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:14:21.868Z,1520669661.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:14:22.275Z,1520669662.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:14:22.685Z,1520669662.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:14:23.085Z,1520669663.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:14:23.481Z,1520669663.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:14:23.885Z,1520669663.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:14:24.285Z,1520669664.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:14:24.669Z,1520669664.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:14:25.065Z,1520669665.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:14:25.466Z,1520669665.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:14:25.869Z,1520669665.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:14:26.271Z,1520669666.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:14:26.678Z,1520669666.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:14:27.085Z,1520669667.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:14:27.475Z,1520669667.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:14:27.870Z,1520669667.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:14:28.285Z,1520669668.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:14:28.671Z,1520669668.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:14:29.108Z,1520669669.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:14:29.508Z,1520669669.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:14:29.880Z,1520669669.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:14:30.285Z,1520669670.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:14:30.689Z,1520669670.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:14:31.089Z,1520669671.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:14:31.464Z,1520669671.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:14:31.866Z,1520669671.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:14:32.266Z,1520669672.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:14:32.682Z,1520669672.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:14:33.081Z,1520669673.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:14:33.479Z,1520669673.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:14:33.871Z,1520669673.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:14:34.270Z,1520669674.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:14:34.683Z,1520669674.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:14:35.075Z,1520669675.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:14:35.480Z,1520669675.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:14:35.878Z,1520669675.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:14:36.277Z,1520669676.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:14:36.678Z,1520669676.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:14:37.084Z,1520669677.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:14:37.456Z,1520669677.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:14:37.881Z,1520669677.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:14:38.262Z,1520669678.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:14:38.685Z,1520669678.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:14:39.085Z,1520669679.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:14:39.464Z,1520669679.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:14:39.865Z,1520669679.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:14:40.285Z,1520669680.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:14:40.665Z,1520669680.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:14:41.101Z,1520669681.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:14:41.508Z,1520669681.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:14:41.883Z,1520669681.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:14:42.285Z,1520669682.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:14:42.663Z,1520669682.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:14:43.065Z,1520669683.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:14:43.484Z,1520669683.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:14:43.866Z,1520669683.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:14:44.259Z,1520669684.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:14:44.692Z,1520669684.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:14:45.090Z,1520669685.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:14:45.469Z,1520669685.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:14:45.869Z,1520669685.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:14:46.293Z,1520669686.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:14:46.688Z,1520669686.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:14:47.065Z,1520669687.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:14:47.488Z,1520669687.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:14:47.886Z,1520669687.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:14:48.288Z,1520669688.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:14:48.688Z,1520669688.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:14:49.060Z,1520669689.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:14:49.464Z,1520669689.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:14:49.888Z,1520669689.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:14:50.288Z,1520669690.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:14:50.668Z,1520669690.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:14:51.085Z,1520669691.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:14:51.488Z,1520669691.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:14:51.880Z,1520669691.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:14:52.262Z,1520669692.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:14:52.669Z,1520669692.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:14:53.088Z,1520669693.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:14:53.509Z,1520669693.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:14:53.896Z,1520669693.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:14:54.272Z,1520669694.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:14:54.690Z,1520669694.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:14:55.091Z,1520669695.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:14:55.466Z,1520669695.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:14:55.873Z,1520669695.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:14:56.288Z,1520669696.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:14:56.708Z,1520669696.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:14:56.710Z,1520669696.710 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-03-10T08:14:56.711Z,1520669696.711 [Default:CheckIn:C.Wait] Stopped
2018-03-10T08:14:56.711Z,1520669696.711 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-03-10T08:14:56.711Z,1520669696.711 [Default:CheckIn:D] Running Loop=1
2018-03-10T08:14:57.101Z,1520669697.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:14:57.104Z,1520669697.104 [Default:CheckIn:D] Stopped
2018-03-10T08:14:57.104Z,1520669697.104 [Default:CheckIn:E] Running Loop=1
2018-03-10T08:14:57.469Z,1520669697.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:14:57.473Z,1520669697.473 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 175.653060 min 
2018-03-10T08:14:57.473Z,1520669697.473 [Default:CheckIn:E] Stopped
2018-03-10T08:14:57.473Z,1520669697.473 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-03-10T08:14:57.473Z,1520669697.473 [Default:CheckIn] Stopped
2018-03-10T08:14:57.473Z,1520669697.473 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-03-10T08:14:57.474Z,1520669697.474 [Default:CheckIn](INFO): Running loop #18
2018-03-10T08:14:57.474Z,1520669697.474 [Default:CheckIn] Running Loop=18
2018-03-10T08:14:57.474Z,1520669697.474 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-03-10T08:14:57.474Z,1520669697.474 [Default:CheckIn:Read_GPS] Running Loop=1
2018-03-10T08:14:57.867Z,1520669697.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:14:58.267Z,1520669698.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:15:01.356Z,1520669701.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:15:01.472Z,1520669701.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:15:01.854Z,1520669701.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:15:02.249Z,1520669702.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:15:02.666Z,1520669702.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:15:03.022Z,1520669703.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:15:03.422Z,1520669703.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:15:03.826Z,1520669703.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:15:04.222Z,1520669704.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:15:04.655Z,1520669704.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:15:05.051Z,1520669705.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:15:05.449Z,1520669705.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:15:05.861Z,1520669705.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:15:06.261Z,1520669706.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:15:06.625Z,1520669706.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:15:07.021Z,1520669707.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:15:07.460Z,1520669707.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:15:07.841Z,1520669707.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:15:08.260Z,1520669708.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:15:08.636Z,1520669708.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:15:09.033Z,1520669709.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:15:09.432Z,1520669709.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:15:09.818Z,1520669709.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:15:10.230Z,1520669710.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:15:10.658Z,1520669710.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:15:11.037Z,1520669711.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:15:11.438Z,1520669711.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:15:11.836Z,1520669711.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:15:12.234Z,1520669712.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:15:12.628Z,1520669712.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:15:13.020Z,1520669713.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:15:13.435Z,1520669713.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:15:13.836Z,1520669713.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:15:14.230Z,1520669714.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:15:14.633Z,1520669714.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:15:15.060Z,1520669715.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:15:15.433Z,1520669715.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:15:15.830Z,1520669715.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:15:16.228Z,1520669716.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:15:16.642Z,1520669716.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:15:17.065Z,1520669717.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:15:17.441Z,1520669717.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:15:17.829Z,1520669717.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:15:18.239Z,1520669718.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:15:18.649Z,1520669718.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:15:19.028Z,1520669719.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:15:19.448Z,1520669719.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:15:19.877Z,1520669719.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:15:20.271Z,1520669720.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:15:20.633Z,1520669720.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:15:21.031Z,1520669721.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:15:21.432Z,1520669721.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:15:21.831Z,1520669721.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:15:22.233Z,1520669722.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:15:22.642Z,1520669722.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:15:23.044Z,1520669723.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:15:23.453Z,1520669723.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:15:23.829Z,1520669723.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:15:24.228Z,1520669724.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:15:24.635Z,1520669724.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:15:25.041Z,1520669725.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:15:25.431Z,1520669725.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:15:25.842Z,1520669725.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:15:26.246Z,1520669726.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:15:26.645Z,1520669726.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:15:27.029Z,1520669727.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:15:27.428Z,1520669727.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:15:27.446Z,1520669727.446 [CBIT](DEBUG): EFC running - data check-sum false
2018-03-10T08:15:27.843Z,1520669727.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:15:28.230Z,1520669728.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:15:28.640Z,1520669728.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:15:29.043Z,1520669729.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:15:29.442Z,1520669729.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:15:29.833Z,1520669729.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:15:30.237Z,1520669730.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:15:30.664Z,1520669730.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:15:31.041Z,1520669731.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:15:31.439Z,1520669731.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:15:31.843Z,1520669731.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:15:32.246Z,1520669732.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:15:32.639Z,1520669732.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:15:33.036Z,1520669733.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:15:33.437Z,1520669733.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:15:33.856Z,1520669733.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:15:34.238Z,1520669734.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:15:34.643Z,1520669734.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:15:35.045Z,1520669735.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:15:35.442Z,1520669735.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:15:35.841Z,1520669735.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:15:36.237Z,1520669736.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:15:36.637Z,1520669736.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:15:37.022Z,1520669737.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:15:37.446Z,1520669737.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:15:37.867Z,1520669737.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:15:38.250Z,1520669738.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:15:38.619Z,1520669738.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:15:39.023Z,1520669739.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:15:39.423Z,1520669739.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:15:39.858Z,1520669739.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:15:40.229Z,1520669740.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:15:40.633Z,1520669740.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:15:41.033Z,1520669741.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:15:41.448Z,1520669741.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:15:41.850Z,1520669741.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:15:42.253Z,1520669742.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:15:42.632Z,1520669742.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:15:43.040Z,1520669743.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:15:43.457Z,1520669743.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:15:43.842Z,1520669743.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:15:44.242Z,1520669744.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:15:44.637Z,1520669744.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:15:45.032Z,1520669745.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:15:45.465Z,1520669745.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:15:45.844Z,1520669745.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:15:46.259Z,1520669746.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:15:46.666Z,1520669746.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:15:47.035Z,1520669747.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:15:47.465Z,1520669747.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:15:47.861Z,1520669747.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:15:48.226Z,1520669748.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:15:48.648Z,1520669748.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:15:49.038Z,1520669749.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:15:49.441Z,1520669749.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:15:49.845Z,1520669749.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:15:50.244Z,1520669750.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:15:50.668Z,1520669750.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:15:51.026Z,1520669751.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:15:51.423Z,1520669751.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:15:51.838Z,1520669751.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:15:52.229Z,1520669752.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:15:52.645Z,1520669752.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:15:53.075Z,1520669753.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:15:53.442Z,1520669753.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:15:53.831Z,1520669753.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:15:54.237Z,1520669754.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:15:54.626Z,1520669754.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:15:55.037Z,1520669755.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:15:55.439Z,1520669755.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:15:55.847Z,1520669755.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:15:56.249Z,1520669756.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:15:56.633Z,1520669756.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:15:57.032Z,1520669757.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:15:57.432Z,1520669757.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:15:57.840Z,1520669757.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:15:58.233Z,1520669758.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:15:58.640Z,1520669758.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:16:01.741Z,1520669761.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:16:01.888Z,1520669761.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:16:02.229Z,1520669762.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:16:02.634Z,1520669762.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:16:03.034Z,1520669763.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:16:03.431Z,1520669763.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:16:03.834Z,1520669763.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:16:04.236Z,1520669764.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:16:04.642Z,1520669764.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:16:05.009Z,1520669765.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:16:05.409Z,1520669765.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:16:05.813Z,1520669765.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:16:06.213Z,1520669766.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:16:06.640Z,1520669766.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:16:07.040Z,1520669767.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:16:07.422Z,1520669767.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:16:07.817Z,1520669767.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:16:08.219Z,1520669768.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:16:08.641Z,1520669768.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:16:09.009Z,1520669769.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:16:09.419Z,1520669769.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:16:09.818Z,1520669769.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:16:10.218Z,1520669770.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:16:10.616Z,1520669770.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:16:11.013Z,1520669771.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:16:11.417Z,1520669771.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:16:11.822Z,1520669771.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:16:12.218Z,1520669772.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:16:12.633Z,1520669772.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:16:13.029Z,1520669773.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:16:13.424Z,1520669773.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:16:13.825Z,1520669773.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:16:14.218Z,1520669774.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:16:14.618Z,1520669774.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:16:15.021Z,1520669775.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:16:15.429Z,1520669775.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:16:15.860Z,1520669775.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:16:16.229Z,1520669776.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:16:16.617Z,1520669776.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:16:17.023Z,1520669777.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:16:17.426Z,1520669777.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:16:17.824Z,1520669777.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:16:18.221Z,1520669778.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:16:18.623Z,1520669778.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:16:19.039Z,1520669779.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:16:19.428Z,1520669779.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:16:19.813Z,1520669779.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:16:20.221Z,1520669780.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:16:20.621Z,1520669780.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:16:21.020Z,1520669781.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:16:21.422Z,1520669781.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:16:21.831Z,1520669781.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:16:22.229Z,1520669782.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:16:22.625Z,1520669782.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:16:23.020Z,1520669783.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:16:23.425Z,1520669783.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:16:23.824Z,1520669783.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:16:24.227Z,1520669784.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:16:24.627Z,1520669784.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:16:25.093Z,1520669785.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:16:25.456Z,1520669785.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:16:25.818Z,1520669785.818 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:16:25.819Z,1520669785.819 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 60
2018-03-10T08:16:25.819Z,1520669785.819 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-03-10T08:16:25.821Z,1520669785.821 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:16:25.821Z,1520669785.821 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 60
2018-03-10T08:16:25.821Z,1520669785.821 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-03-10T08:16:25.822Z,1520669785.822 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:16:25.823Z,1520669785.823 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 60
2018-03-10T08:16:25.823Z,1520669785.823 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-10T08:16:25.835Z,1520669785.835 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-03-10T08:16:25.835Z,1520669785.835 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-03-10T08:16:25.835Z,1520669785.835 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-10T08:16:26.230Z,1520669786.230 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-03-10T08:16:26.230Z,1520669786.230 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 60
2018-03-10T08:16:26.239Z,1520669786.239 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-03-10T08:16:26.239Z,1520669786.239 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 60
2018-03-10T08:16:26.239Z,1520669786.239 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-10T08:16:26.239Z,1520669786.239 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 60
2018-03-10T08:16:26.613Z,1520669786.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-03-10T08:16:26.613Z,1520669786.613 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-03-10T08:16:26.614Z,1520669786.614 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-03-10T08:16:26.614Z,1520669786.614 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-03-10T08:16:26.614Z,1520669786.614 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-03-10T08:16:26.615Z,1520669786.615 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-03-10T08:16:26.615Z,1520669786.615 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-10T08:16:26.616Z,1520669786.616 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-10T08:16:26.616Z,1520669786.616 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-10T08:16:27.017Z,1520669787.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-03-10T08:16:27.018Z,1520669787.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:16:27.455Z,1520669787.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-03-10T08:16:27.456Z,1520669787.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:16:27.825Z,1520669787.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-03-10T08:16:27.826Z,1520669787.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:16:28.232Z,1520669788.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-03-10T08:16:28.233Z,1520669788.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:16:28.619Z,1520669788.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-03-10T08:16:28.620Z,1520669788.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:16:29.016Z,1520669789.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-03-10T08:16:29.017Z,1520669789.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:16:29.409Z,1520669789.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-03-10T08:16:29.410Z,1520669789.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:16:29.819Z,1520669789.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-03-10T08:16:29.820Z,1520669789.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:16:30.216Z,1520669790.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-03-10T08:16:30.217Z,1520669790.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:16:30.621Z,1520669790.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-03-10T08:16:30.621Z,1520669790.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:16:31.029Z,1520669791.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-03-10T08:16:31.030Z,1520669791.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:16:31.427Z,1520669791.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-03-10T08:16:31.428Z,1520669791.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:16:31.812Z,1520669791.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-03-10T08:16:31.813Z,1520669791.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:16:32.217Z,1520669792.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-03-10T08:16:32.218Z,1520669792.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:16:32.620Z,1520669792.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-03-10T08:16:32.621Z,1520669792.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:16:33.015Z,1520669793.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-03-10T08:16:33.016Z,1520669793.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:16:33.434Z,1520669793.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-03-10T08:16:33.436Z,1520669793.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:16:33.837Z,1520669793.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-03-10T08:16:33.838Z,1520669793.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:16:34.222Z,1520669794.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-03-10T08:16:34.223Z,1520669794.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:16:34.613Z,1520669794.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-03-10T08:16:34.614Z,1520669794.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:16:35.015Z,1520669795.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-03-10T08:16:35.016Z,1520669795.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:16:35.418Z,1520669795.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-03-10T08:16:35.419Z,1520669795.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:16:35.814Z,1520669795.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-03-10T08:16:35.814Z,1520669795.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:16:36.228Z,1520669796.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-03-10T08:16:36.229Z,1520669796.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:16:36.631Z,1520669796.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-03-10T08:16:36.633Z,1520669796.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:16:37.034Z,1520669797.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-03-10T08:16:37.035Z,1520669797.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:16:37.437Z,1520669797.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-03-10T08:16:37.438Z,1520669797.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:16:37.816Z,1520669797.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-03-10T08:16:37.817Z,1520669797.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:16:38.215Z,1520669798.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-03-10T08:16:38.216Z,1520669798.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:16:38.643Z,1520669798.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-03-10T08:16:38.644Z,1520669798.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:16:39.013Z,1520669799.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-03-10T08:16:39.014Z,1520669799.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:16:39.414Z,1520669799.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-03-10T08:16:39.415Z,1520669799.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:16:39.812Z,1520669799.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-03-10T08:16:39.813Z,1520669799.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:16:40.226Z,1520669800.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-03-10T08:16:40.243Z,1520669800.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:16:40.614Z,1520669800.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-03-10T08:16:40.616Z,1520669800.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:16:41.013Z,1520669801.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-03-10T08:16:41.013Z,1520669801.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:16:41.412Z,1520669801.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-03-10T08:16:41.413Z,1520669801.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:16:41.820Z,1520669801.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-03-10T08:16:41.821Z,1520669801.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:16:42.217Z,1520669802.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-03-10T08:16:42.218Z,1520669802.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:16:42.629Z,1520669802.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-03-10T08:16:42.629Z,1520669802.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:16:43.052Z,1520669803.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-03-10T08:16:43.053Z,1520669803.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:16:43.422Z,1520669803.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-03-10T08:16:43.423Z,1520669803.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:16:43.816Z,1520669803.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-03-10T08:16:43.817Z,1520669803.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:16:44.216Z,1520669804.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2018-03-10T08:16:44.217Z,1520669804.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:16:44.617Z,1520669804.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2018-03-10T08:16:44.618Z,1520669804.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:16:45.017Z,1520669805.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2018-03-10T08:16:45.018Z,1520669805.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:16:45.428Z,1520669805.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2018-03-10T08:16:45.429Z,1520669805.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:16:45.855Z,1520669805.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:16:46.236Z,1520669806.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:16:46.621Z,1520669806.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:16:47.011Z,1520669807.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:16:47.417Z,1520669807.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:16:47.821Z,1520669807.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:16:48.217Z,1520669808.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:16:48.627Z,1520669808.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:16:49.030Z,1520669809.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:16:49.437Z,1520669809.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:16:49.841Z,1520669809.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:16:50.218Z,1520669810.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:16:50.620Z,1520669810.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:16:51.018Z,1520669811.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:16:51.429Z,1520669811.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:16:51.832Z,1520669811.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:16:52.233Z,1520669812.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:16:52.626Z,1520669812.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:16:53.017Z,1520669813.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:16:53.418Z,1520669813.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:16:53.816Z,1520669813.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:16:54.221Z,1520669814.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:16:54.628Z,1520669814.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:16:55.031Z,1520669815.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:16:55.429Z,1520669815.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:16:55.818Z,1520669815.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:16:56.214Z,1520669816.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:16:56.622Z,1520669816.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:16:57.026Z,1520669817.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:16:57.445Z,1520669817.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:16:57.840Z,1520669817.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:16:58.233Z,1520669818.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:16:58.622Z,1520669818.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:16:59.037Z,1520669819.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:17:02.140Z,1520669822.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:17:02.278Z,1520669822.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:17:02.645Z,1520669822.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:17:03.028Z,1520669823.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:17:03.423Z,1520669823.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:17:03.825Z,1520669823.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:17:04.200Z,1520669824.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:17:04.625Z,1520669824.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:17:05.029Z,1520669825.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:17:05.439Z,1520669825.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:17:05.834Z,1520669825.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:17:06.235Z,1520669826.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:17:06.604Z,1520669826.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:17:07.005Z,1520669827.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:17:07.413Z,1520669827.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:17:07.805Z,1520669827.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:17:08.214Z,1520669828.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:17:08.652Z,1520669828.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:17:09.038Z,1520669829.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:17:09.415Z,1520669829.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:17:09.811Z,1520669829.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:17:10.216Z,1520669830.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:17:10.621Z,1520669830.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:17:11.017Z,1520669831.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:17:11.424Z,1520669831.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:17:11.825Z,1520669831.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:17:12.217Z,1520669832.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:17:12.605Z,1520669832.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:17:13.009Z,1520669833.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:17:13.408Z,1520669833.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:17:13.809Z,1520669833.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:17:14.214Z,1520669834.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:17:14.651Z,1520669834.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:17:15.026Z,1520669835.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:17:15.429Z,1520669835.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:17:15.817Z,1520669835.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:17:16.212Z,1520669836.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:17:16.621Z,1520669836.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:17:17.017Z,1520669837.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:17:17.422Z,1520669837.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:17:17.834Z,1520669837.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:17:18.222Z,1520669838.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:17:18.612Z,1520669838.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:17:19.017Z,1520669839.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:17:19.415Z,1520669839.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:17:19.813Z,1520669839.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:17:20.217Z,1520669840.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:17:20.657Z,1520669840.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:17:21.027Z,1520669841.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:17:21.422Z,1520669841.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:17:21.809Z,1520669841.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:17:22.216Z,1520669842.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:17:22.615Z,1520669842.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:17:23.009Z,1520669843.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:17:23.422Z,1520669843.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:17:23.826Z,1520669843.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:17:24.222Z,1520669844.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:17:24.613Z,1520669844.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:17:25.019Z,1520669845.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:17:25.419Z,1520669845.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:17:25.820Z,1520669845.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:17:26.219Z,1520669846.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:17:26.625Z,1520669846.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:17:27.030Z,1520669847.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:17:27.449Z,1520669847.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:17:27.820Z,1520669847.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:17:28.223Z,1520669848.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:17:28.609Z,1520669848.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:17:29.013Z,1520669849.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:17:29.442Z,1520669849.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:17:29.835Z,1520669849.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:17:30.215Z,1520669850.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:17:30.610Z,1520669850.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:17:31.006Z,1520669851.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:17:31.417Z,1520669851.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:17:31.813Z,1520669851.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:17:32.224Z,1520669852.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:17:32.618Z,1520669852.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:17:33.018Z,1520669853.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:17:33.415Z,1520669853.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:17:33.812Z,1520669853.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:17:34.205Z,1520669854.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:17:34.609Z,1520669854.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:17:35.010Z,1520669855.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:17:35.419Z,1520669855.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:17:35.819Z,1520669855.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:17:36.221Z,1520669856.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:17:36.607Z,1520669856.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:17:37.015Z,1520669857.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:17:37.417Z,1520669857.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:17:37.812Z,1520669857.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:17:38.211Z,1520669858.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:17:38.618Z,1520669858.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:17:39.032Z,1520669859.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:17:39.429Z,1520669859.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:17:39.819Z,1520669859.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:17:40.229Z,1520669860.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:17:40.609Z,1520669860.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:17:41.015Z,1520669861.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:17:41.423Z,1520669861.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:17:41.821Z,1520669861.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:17:42.222Z,1520669862.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:17:42.612Z,1520669862.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:17:43.033Z,1520669863.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:17:43.433Z,1520669863.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:17:43.816Z,1520669863.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:17:44.213Z,1520669864.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:17:44.623Z,1520669864.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:17:45.029Z,1520669865.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:17:45.423Z,1520669865.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:17:45.823Z,1520669865.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:17:46.216Z,1520669866.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:17:46.671Z,1520669866.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:17:47.065Z,1520669867.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:17:47.441Z,1520669867.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:17:47.832Z,1520669867.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:17:48.229Z,1520669868.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:17:48.604Z,1520669868.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:17:49.024Z,1520669869.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:17:49.445Z,1520669869.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:17:49.833Z,1520669869.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:17:50.252Z,1520669870.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:17:50.646Z,1520669870.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:17:51.040Z,1520669871.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:17:51.433Z,1520669871.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:17:51.834Z,1520669871.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:17:52.218Z,1520669872.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:17:52.644Z,1520669872.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:17:53.008Z,1520669873.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:17:53.415Z,1520669873.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:17:53.818Z,1520669873.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:17:54.220Z,1520669874.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:17:54.621Z,1520669874.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:17:55.011Z,1520669875.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:17:55.411Z,1520669875.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:17:55.809Z,1520669875.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:17:56.217Z,1520669876.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:17:56.617Z,1520669876.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:17:57.017Z,1520669877.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:17:57.418Z,1520669877.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:17:57.808Z,1520669877.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:17:58.209Z,1520669878.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:17:58.613Z,1520669878.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:17:59.010Z,1520669879.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:17:59.424Z,1520669879.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:18:02.553Z,1520669882.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:18:02.697Z,1520669882.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:18:03.052Z,1520669883.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:18:03.423Z,1520669883.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:18:03.828Z,1520669883.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:18:04.226Z,1520669884.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:18:04.628Z,1520669884.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:18:05.073Z,1520669885.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:18:05.465Z,1520669885.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:18:05.855Z,1520669885.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:18:06.226Z,1520669886.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:18:06.629Z,1520669886.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:18:07.025Z,1520669887.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:18:07.434Z,1520669887.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:18:07.839Z,1520669887.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:18:08.234Z,1520669888.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:18:08.629Z,1520669888.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:18:09.028Z,1520669889.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:18:09.435Z,1520669889.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:18:09.828Z,1520669889.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:18:10.224Z,1520669890.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:18:10.637Z,1520669890.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:18:11.038Z,1520669891.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:18:11.441Z,1520669891.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:18:11.838Z,1520669891.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:18:12.226Z,1520669892.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:18:12.635Z,1520669892.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:18:13.042Z,1520669893.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:18:13.438Z,1520669893.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:18:13.846Z,1520669893.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:18:14.253Z,1520669894.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:18:14.649Z,1520669894.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:18:15.027Z,1520669895.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:18:15.429Z,1520669895.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:18:15.834Z,1520669895.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:18:16.232Z,1520669896.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:18:16.648Z,1520669896.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:18:17.053Z,1520669897.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:18:17.442Z,1520669897.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:18:17.836Z,1520669897.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:18:18.241Z,1520669898.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:18:18.633Z,1520669898.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:18:19.040Z,1520669899.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:18:19.439Z,1520669899.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:18:19.839Z,1520669899.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:18:20.250Z,1520669900.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:18:20.639Z,1520669900.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:18:21.052Z,1520669901.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:18:21.437Z,1520669901.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:18:21.836Z,1520669901.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:18:22.239Z,1520669902.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:18:22.698Z,1520669902.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:18:23.056Z,1520669903.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:18:23.431Z,1520669903.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:18:23.832Z,1520669903.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:18:24.225Z,1520669904.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:18:24.626Z,1520669904.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:18:25.025Z,1520669905.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:18:25.435Z,1520669905.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:18:25.837Z,1520669905.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:18:26.239Z,1520669906.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:18:26.625Z,1520669906.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:18:27.027Z,1520669907.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:18:27.432Z,1520669907.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:18:27.833Z,1520669907.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:18:28.235Z,1520669908.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:18:28.667Z,1520669908.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:18:29.035Z,1520669909.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:18:29.438Z,1520669909.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:18:29.829Z,1520669909.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:18:30.236Z,1520669910.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:18:30.635Z,1520669910.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:18:31.041Z,1520669911.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:18:31.447Z,1520669911.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:18:31.845Z,1520669911.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:18:32.274Z,1520669912.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:18:32.637Z,1520669912.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:18:33.026Z,1520669913.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:18:33.429Z,1520669913.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:18:33.837Z,1520669913.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:18:34.225Z,1520669914.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:18:34.646Z,1520669914.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:18:35.039Z,1520669915.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:18:35.434Z,1520669915.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:18:35.837Z,1520669915.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:18:36.229Z,1520669916.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:18:36.640Z,1520669916.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:18:37.036Z,1520669917.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:18:37.439Z,1520669917.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:18:37.846Z,1520669917.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:18:38.253Z,1520669918.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:18:38.643Z,1520669918.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:18:39.045Z,1520669919.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:18:39.430Z,1520669919.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:18:39.856Z,1520669919.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:18:40.229Z,1520669920.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:18:40.630Z,1520669920.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:18:41.030Z,1520669921.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:18:41.457Z,1520669921.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:18:41.824Z,1520669921.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:18:42.221Z,1520669922.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:18:42.627Z,1520669922.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:18:43.030Z,1520669923.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:18:43.438Z,1520669923.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:18:43.862Z,1520669923.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:18:44.238Z,1520669924.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:18:44.622Z,1520669924.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:18:45.029Z,1520669925.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:18:45.426Z,1520669925.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:18:45.829Z,1520669925.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:18:46.235Z,1520669926.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:18:46.632Z,1520669926.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:18:47.034Z,1520669927.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:18:47.431Z,1520669927.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:18:47.831Z,1520669927.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:18:48.221Z,1520669928.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:18:48.625Z,1520669928.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:18:49.024Z,1520669929.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:18:49.437Z,1520669929.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:18:49.835Z,1520669929.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:18:50.236Z,1520669930.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:18:50.645Z,1520669930.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:18:51.033Z,1520669931.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:18:51.427Z,1520669931.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:18:51.826Z,1520669931.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:18:52.226Z,1520669932.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:18:52.638Z,1520669932.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:18:53.036Z,1520669933.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:18:53.434Z,1520669933.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:18:53.839Z,1520669933.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:18:54.229Z,1520669934.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:18:54.629Z,1520669934.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:18:55.025Z,1520669935.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:18:55.434Z,1520669935.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:18:55.839Z,1520669935.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:18:56.241Z,1520669936.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:18:56.646Z,1520669936.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:18:57.029Z,1520669937.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:18:57.432Z,1520669937.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:18:57.826Z,1520669937.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:18:58.231Z,1520669938.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:18:58.642Z,1520669938.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:18:59.046Z,1520669939.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:18:59.465Z,1520669939.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:18:59.829Z,1520669939.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:19:00.233Z,1520669940.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:19:00.632Z,1520669940.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:19:03.924Z,1520669943.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:19:04.101Z,1520669944.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:19:04.420Z,1520669944.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:19:04.822Z,1520669944.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:19:05.204Z,1520669945.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:19:05.598Z,1520669945.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:19:06.001Z,1520669946.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:19:06.405Z,1520669946.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:19:06.800Z,1520669946.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:19:07.203Z,1520669947.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:19:07.605Z,1520669947.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:19:07.996Z,1520669947.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:19:08.394Z,1520669948.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:19:08.801Z,1520669948.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:19:09.203Z,1520669949.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:19:09.629Z,1520669949.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:19:10.014Z,1520669950.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:19:10.406Z,1520669950.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:19:10.807Z,1520669950.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:19:11.197Z,1520669951.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:19:11.601Z,1520669951.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:19:11.995Z,1520669951.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:19:12.410Z,1520669952.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:19:12.817Z,1520669952.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:19:13.210Z,1520669953.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:19:13.597Z,1520669953.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:19:14.005Z,1520669954.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:19:14.402Z,1520669954.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:19:14.791Z,1520669954.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:19:15.197Z,1520669955.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:19:15.613Z,1520669955.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:19:16.025Z,1520669956.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:19:16.409Z,1520669956.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:19:16.800Z,1520669956.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:19:17.200Z,1520669957.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:19:17.594Z,1520669957.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:19:17.997Z,1520669957.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:19:18.407Z,1520669958.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:19:18.807Z,1520669958.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:19:19.208Z,1520669959.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:19:19.599Z,1520669959.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:19:19.999Z,1520669959.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:19:20.400Z,1520669960.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:19:20.798Z,1520669960.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:19:21.199Z,1520669961.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:19:21.608Z,1520669961.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:19:22.018Z,1520669962.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:19:22.425Z,1520669962.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:19:22.799Z,1520669962.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:19:23.199Z,1520669963.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:19:23.600Z,1520669963.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:19:24.005Z,1520669964.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:19:24.408Z,1520669964.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:19:24.821Z,1520669964.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:19:25.212Z,1520669965.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:19:25.598Z,1520669965.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:19:25.000Z,1520669966.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:19:26.400Z,1520669966.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:19:26.799Z,1520669966.799 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:19:26.799Z,1520669966.799 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 61
2018-03-10T08:19:26.799Z,1520669966.799 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-03-10T08:19:26.801Z,1520669966.801 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:19:26.801Z,1520669966.801 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 61
2018-03-10T08:19:26.801Z,1520669966.801 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-03-10T08:19:26.803Z,1520669966.803 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:19:26.803Z,1520669966.803 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 61
2018-03-10T08:19:26.803Z,1520669966.803 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-10T08:19:26.815Z,1520669966.815 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-03-10T08:19:26.815Z,1520669966.815 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-03-10T08:19:26.816Z,1520669966.816 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-10T08:19:27.214Z,1520669967.214 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-03-10T08:19:27.214Z,1520669967.214 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 61
2018-03-10T08:19:27.215Z,1520669967.215 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-03-10T08:19:27.215Z,1520669967.215 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 61
2018-03-10T08:19:27.216Z,1520669967.216 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-10T08:19:27.216Z,1520669967.216 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 61
2018-03-10T08:19:27.607Z,1520669967.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-03-10T08:19:27.607Z,1520669967.607 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-03-10T08:19:27.608Z,1520669967.608 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-03-10T08:19:27.608Z,1520669967.608 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-03-10T08:19:27.608Z,1520669967.608 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-03-10T08:19:27.609Z,1520669967.609 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-03-10T08:19:27.609Z,1520669967.609 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-10T08:19:27.609Z,1520669967.609 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-10T08:19:27.610Z,1520669967.610 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-10T08:19:28.037Z,1520669968.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-03-10T08:19:28.038Z,1520669968.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:19:28.416Z,1520669968.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-03-10T08:19:28.417Z,1520669968.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:19:28.816Z,1520669968.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-03-10T08:19:28.817Z,1520669968.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:19:29.196Z,1520669969.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-03-10T08:19:29.197Z,1520669969.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:19:29.593Z,1520669969.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-03-10T08:19:29.594Z,1520669969.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:19:29.994Z,1520669969.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-03-10T08:19:29.995Z,1520669969.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:19:30.391Z,1520669970.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-03-10T08:19:30.392Z,1520669970.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:19:30.821Z,1520669970.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-03-10T08:19:30.822Z,1520669970.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:19:31.221Z,1520669971.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-03-10T08:19:31.222Z,1520669971.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:19:31.596Z,1520669971.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-03-10T08:19:31.597Z,1520669971.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:19:31.994Z,1520669971.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-03-10T08:19:31.994Z,1520669971.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:19:32.400Z,1520669972.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-03-10T08:19:32.401Z,1520669972.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:19:32.800Z,1520669972.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-03-10T08:19:32.801Z,1520669972.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:19:33.201Z,1520669973.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-03-10T08:19:33.202Z,1520669973.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:19:33.604Z,1520669973.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-03-10T08:19:33.605Z,1520669973.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:19:34.009Z,1520669974.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-03-10T08:19:34.010Z,1520669974.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:19:34.429Z,1520669974.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-03-10T08:19:34.430Z,1520669974.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:19:34.794Z,1520669974.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-03-10T08:19:34.795Z,1520669974.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:19:35.190Z,1520669975.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-03-10T08:19:35.191Z,1520669975.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:19:35.595Z,1520669975.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-03-10T08:19:35.596Z,1520669975.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:19:36.002Z,1520669976.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-03-10T08:19:36.003Z,1520669976.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:19:36.400Z,1520669976.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-03-10T08:19:36.400Z,1520669976.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:19:36.801Z,1520669976.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-03-10T08:19:36.802Z,1520669976.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:19:37.203Z,1520669977.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-03-10T08:19:37.204Z,1520669977.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:19:37.600Z,1520669977.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-03-10T08:19:37.601Z,1520669977.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:19:37.992Z,1520669977.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-03-10T08:19:37.993Z,1520669977.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:19:38.398Z,1520669978.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-03-10T08:19:38.399Z,1520669978.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:19:38.794Z,1520669978.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-03-10T08:19:38.794Z,1520669978.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:19:39.201Z,1520669979.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-03-10T08:19:39.202Z,1520669979.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:19:39.603Z,1520669979.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-03-10T08:19:39.604Z,1520669979.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:19:40.008Z,1520669980.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-03-10T08:19:40.009Z,1520669980.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:19:40.408Z,1520669980.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-03-10T08:19:40.409Z,1520669980.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:19:40.805Z,1520669980.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-03-10T08:19:40.806Z,1520669980.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:19:41.201Z,1520669981.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-03-10T08:19:41.202Z,1520669981.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:19:41.604Z,1520669981.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-03-10T08:19:41.605Z,1520669981.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:19:41.000Z,1520669982.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-03-10T08:19:42.001Z,1520669982.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:19:42.410Z,1520669982.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-03-10T08:19:42.412Z,1520669982.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:19:42.807Z,1520669982.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-03-10T08:19:42.808Z,1520669982.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:19:43.209Z,1520669983.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-03-10T08:19:43.209Z,1520669983.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:19:43.604Z,1520669983.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-03-10T08:19:43.605Z,1520669983.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:19:43.999Z,1520669983.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-03-10T08:19:44.000Z,1520669984.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:19:44.406Z,1520669984.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-03-10T08:19:44.407Z,1520669984.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:19:44.798Z,1520669984.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-03-10T08:19:44.799Z,1520669984.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:19:45.196Z,1520669985.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2018-03-10T08:19:45.197Z,1520669985.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:19:45.606Z,1520669985.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2018-03-10T08:19:45.607Z,1520669985.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:19:46.010Z,1520669986.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2018-03-10T08:19:46.011Z,1520669986.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:19:46.410Z,1520669986.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2018-03-10T08:19:46.410Z,1520669986.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:19:46.797Z,1520669986.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 20.0 s old, using for 20.0 s.
2018-03-10T08:19:46.798Z,1520669986.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:19:47.196Z,1520669987.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:19:47.601Z,1520669987.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:19:48.001Z,1520669988.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:19:48.404Z,1520669988.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:19:48.820Z,1520669988.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:19:49.210Z,1520669989.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:19:49.601Z,1520669989.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:19:50.006Z,1520669990.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:19:50.385Z,1520669990.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:19:50.810Z,1520669990.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:19:51.209Z,1520669991.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:19:51.616Z,1520669991.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:19:52.013Z,1520669992.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:19:52.417Z,1520669992.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:19:52.790Z,1520669992.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:19:53.193Z,1520669993.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:19:53.593Z,1520669993.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:19:54.022Z,1520669994.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:19:54.419Z,1520669994.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:19:54.824Z,1520669994.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:19:55.199Z,1520669995.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:19:55.597Z,1520669995.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:19:55.997Z,1520669995.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:19:56.396Z,1520669996.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:19:56.801Z,1520669996.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:19:57.217Z,1520669997.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:19:57.603Z,1520669997.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:19:57.607Z,1520669997.607 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-03-10T08:14:57.5Z
2018-03-10T08:19:57.607Z,1520669997.607 [Default:CheckIn:Read_GPS] Stopped
2018-03-10T08:19:57.607Z,1520669997.607 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-03-10T08:19:58.002Z,1520669998.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:19:58.611Z,1520669998.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:19:58.845Z,1520669998.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:20:03.172Z,1520670003.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:20:03.304Z,1520670003.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:20:03.632Z,1520670003.632 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20180310T051512/Courier0072.lzma
2018-03-10T08:20:03.702Z,1520670003.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:20:04.074Z,1520670004.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:20:04.489Z,1520670004.489 [DataOverHttps](INFO): Moved sent file to Logs/20180310T051512/Courier0072.lzma.bak
2018-03-10T08:20:04.489Z,1520670004.489 [DataOverHttps](INFO): SBD MOMSN=8003072
2018-03-10T08:20:04.556Z,1520670004.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:20:05.156Z,1520670005.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:20:05.297Z,1520670005.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:20:05.672Z,1520670005.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:20:08.780Z,1520670008.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:20:08.947Z,1520670008.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:20:09.308Z,1520670009.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:20:09.722Z,1520670009.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:20:10.085Z,1520670010.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:20:10.508Z,1520670010.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:20:10.887Z,1520670010.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:20:14.014Z,1520670014.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:20:14.105Z,1520670014.105 [DataOverHttps](INFO): Sending 170 bytes from file Logs/20180310T051512/Express0073.lzma
2018-03-10T08:20:14.166Z,1520670014.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:20:14.490Z,1520670014.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:20:14.845Z,1520670014.845 [DataOverHttps](INFO): Moved sent file to Logs/20180310T051512/Express0073.lzma.bak
2018-03-10T08:20:14.845Z,1520670014.845 [DataOverHttps](INFO): SBD MOMSN=8003074
2018-03-10T08:20:14.917Z,1520670014.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:20:19.005Z,1520670019.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:20:19.008Z,1520670019.008 [Default:CheckIn:Read_Iridium] Stopped
2018-03-10T08:20:19.008Z,1520670019.008 [Default:CheckIn:C.Wait] Running Loop=1
2018-03-10T08:20:19.008Z,1520670019.008 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-03-10T08:20:19.109Z,1520670019.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:20:19.485Z,1520670019.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:20:22.680Z,1520670022.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:20:22.837Z,1520670022.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:20:23.189Z,1520670023.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:20:23.581Z,1520670023.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:20:23.989Z,1520670023.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:20:24.414Z,1520670024.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:20:24.790Z,1520670024.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:20:25.187Z,1520670025.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:20:25.584Z,1520670025.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:20:25.981Z,1520670025.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:20:26.405Z,1520670026.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:20:26.793Z,1520670026.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:20:27.188Z,1520670027.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:20:27.590Z,1520670027.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:20:27.991Z,1520670027.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:20:28.391Z,1520670028.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:20:28.788Z,1520670028.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:20:29.189Z,1520670029.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:20:29.585Z,1520670029.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:20:29.988Z,1520670029.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:20:30.390Z,1520670030.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:20:30.793Z,1520670030.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:20:31.197Z,1520670031.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:20:31.588Z,1520670031.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:20:31.988Z,1520670031.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:20:32.388Z,1520670032.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:20:32.786Z,1520670032.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:20:33.188Z,1520670033.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:20:33.592Z,1520670033.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:20:33.995Z,1520670033.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:20:34.391Z,1520670034.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:20:34.788Z,1520670034.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:20:35.190Z,1520670035.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:20:35.593Z,1520670035.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:20:35.986Z,1520670035.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:20:36.394Z,1520670036.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:20:36.795Z,1520670036.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:20:37.194Z,1520670037.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:20:37.588Z,1520670037.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:20:37.990Z,1520670037.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:20:38.389Z,1520670038.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:20:38.790Z,1520670038.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:20:39.196Z,1520670039.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:20:39.626Z,1520670039.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:20:39.998Z,1520670039.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:20:40.404Z,1520670040.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:20:40.790Z,1520670040.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:20:41.189Z,1520670041.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:20:41.586Z,1520670041.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:20:41.989Z,1520670041.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:20:42.401Z,1520670042.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:20:42.802Z,1520670042.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:20:43.198Z,1520670043.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:20:43.597Z,1520670043.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:20:43.992Z,1520670043.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:20:44.388Z,1520670044.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:20:44.788Z,1520670044.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:20:45.188Z,1520670045.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:20:45.603Z,1520670045.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:20:45.999Z,1520670045.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:20:46.400Z,1520670046.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:20:46.790Z,1520670046.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:20:47.186Z,1520670047.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:20:47.600Z,1520670047.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:20:47.993Z,1520670047.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:20:48.431Z,1520670048.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:20:48.809Z,1520670048.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:20:49.201Z,1520670049.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:20:49.589Z,1520670049.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:20:49.988Z,1520670049.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:20:50.390Z,1520670050.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:20:50.789Z,1520670050.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:20:51.208Z,1520670051.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:20:51.621Z,1520670051.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:20:52.003Z,1520670052.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:20:52.399Z,1520670052.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:20:52.792Z,1520670052.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:20:53.192Z,1520670053.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:20:53.594Z,1520670053.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:20:53.992Z,1520670053.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:20:54.400Z,1520670054.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:20:54.814Z,1520670054.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:20:55.201Z,1520670055.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:20:55.592Z,1520670055.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:20:55.997Z,1520670055.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:20:56.396Z,1520670056.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:20:56.848Z,1520670056.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:20:57.181Z,1520670057.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:20:57.597Z,1520670057.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:20:58.001Z,1520670058.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:20:58.397Z,1520670058.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:20:58.777Z,1520670058.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:20:59.190Z,1520670059.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:20:59.578Z,1520670059.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:21:00.009Z,1520670060.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:21:00.413Z,1520670060.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:21:00.816Z,1520670060.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:21:01.206Z,1520670061.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:21:01.606Z,1520670061.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:21:01.981Z,1520670061.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:21:02.408Z,1520670062.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:21:02.782Z,1520670062.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:21:03.184Z,1520670063.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:21:03.611Z,1520670063.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:21:04.016Z,1520670064.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:21:04.414Z,1520670064.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:21:04.789Z,1520670064.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:21:05.189Z,1520670065.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:21:05.585Z,1520670065.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:21:05.989Z,1520670065.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:21:06.415Z,1520670066.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:21:06.794Z,1520670066.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:21:07.191Z,1520670067.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:21:07.588Z,1520670067.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:21:07.989Z,1520670067.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:21:08.388Z,1520670068.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:21:08.789Z,1520670068.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:21:09.188Z,1520670069.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:21:09.590Z,1520670069.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:21:09.997Z,1520670069.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:21:10.396Z,1520670070.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:21:10.788Z,1520670070.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:21:11.189Z,1520670071.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:21:11.589Z,1520670071.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:21:11.988Z,1520670071.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:21:12.390Z,1520670072.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:21:12.800Z,1520670072.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:21:13.196Z,1520670073.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:21:13.605Z,1520670073.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:21:13.989Z,1520670073.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:21:14.389Z,1520670074.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:21:14.789Z,1520670074.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:21:15.188Z,1520670075.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:21:15.605Z,1520670075.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:21:15.997Z,1520670075.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:21:16.399Z,1520670076.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:21:16.795Z,1520670076.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:21:17.224Z,1520670077.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:21:17.588Z,1520670077.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:21:17.989Z,1520670077.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:21:18.401Z,1520670078.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:21:18.802Z,1520670078.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:21:19.199Z,1520670079.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:21:19.588Z,1520670079.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:21:22.692Z,1520670082.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:21:22.825Z,1520670082.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:21:23.181Z,1520670083.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:21:23.589Z,1520670083.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:21:23.985Z,1520670083.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:21:24.357Z,1520670084.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:21:24.761Z,1520670084.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:21:25.165Z,1520670085.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:21:25.609Z,1520670085.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:21:25.990Z,1520670085.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:21:26.367Z,1520670086.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:21:26.762Z,1520670086.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:21:27.160Z,1520670087.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:21:27.562Z,1520670087.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:21:27.960Z,1520670087.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:21:28.393Z,1520670088.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:21:28.766Z,1520670088.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:21:29.201Z,1520670089.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:21:29.577Z,1520670089.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:21:29.964Z,1520670089.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:21:30.369Z,1520670090.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:21:30.766Z,1520670090.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:21:31.161Z,1520670091.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:21:31.577Z,1520670091.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:21:31.970Z,1520670091.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:21:32.370Z,1520670092.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:21:32.773Z,1520670092.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:21:33.166Z,1520670093.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:21:33.569Z,1520670093.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:21:33.969Z,1520670093.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:21:34.371Z,1520670094.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:21:34.776Z,1520670094.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:21:35.170Z,1520670095.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:21:35.566Z,1520670095.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:21:35.973Z,1520670095.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:21:36.369Z,1520670096.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:21:36.769Z,1520670096.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:21:37.165Z,1520670097.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:21:37.572Z,1520670097.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:21:37.973Z,1520670097.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:21:38.370Z,1520670098.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:21:38.770Z,1520670098.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:21:39.181Z,1520670099.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:21:39.566Z,1520670099.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:21:39.969Z,1520670099.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:21:40.370Z,1520670100.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:21:40.770Z,1520670100.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:21:41.169Z,1520670101.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:21:41.564Z,1520670101.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:21:41.956Z,1520670101.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:21:42.368Z,1520670102.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:21:42.765Z,1520670102.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:21:43.168Z,1520670103.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:21:43.581Z,1520670103.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:21:43.973Z,1520670103.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:21:44.366Z,1520670104.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:21:44.769Z,1520670104.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:21:45.165Z,1520670105.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:21:45.565Z,1520670105.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:21:46.005Z,1520670106.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:21:46.408Z,1520670106.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:21:46.813Z,1520670106.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:21:47.182Z,1520670107.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:21:47.607Z,1520670107.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:21:47.975Z,1520670107.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:21:48.367Z,1520670108.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:21:48.810Z,1520670108.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:21:49.181Z,1520670109.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:21:49.577Z,1520670109.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:21:50.006Z,1520670110.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:21:50.409Z,1520670110.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:21:50.781Z,1520670110.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:21:51.200Z,1520670111.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:21:51.594Z,1520670111.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:21:51.997Z,1520670111.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:21:52.400Z,1520670112.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:21:52.797Z,1520670112.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:21:53.173Z,1520670113.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:21:53.572Z,1520670113.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:21:53.997Z,1520670113.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:21:54.373Z,1520670114.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:21:54.806Z,1520670114.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:21:55.174Z,1520670115.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:21:55.577Z,1520670115.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:21:55.998Z,1520670115.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:21:56.397Z,1520670116.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:21:56.775Z,1520670116.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:21:57.185Z,1520670117.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:21:57.571Z,1520670117.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:21:57.977Z,1520670117.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:21:58.377Z,1520670118.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:21:58.777Z,1520670118.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:21:59.174Z,1520670119.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:21:59.549Z,1520670119.549 [BPC1](ERROR): Failed to receive battery data
2018-03-10T08:21:59.550Z,1520670119.550 [BPC1] Communications Fault, FailCount= 1
2018-03-10T08:21:59.550Z,1520670119.550 [BPC1](ERROR): Communications Fault
2018-03-10T08:21:59.564Z,1520670119.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:21:59.581Z,1520670119.581 [CBIT](ERROR): Communications Fault in component: BPC1
2018-03-10T08:21:59.969Z,1520670119.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:22:00.369Z,1520670120.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:22:00.764Z,1520670120.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:22:00.776Z,1520670120.776 [CBIT](INFO): Clearing failed state for component BPC1
2018-03-10T08:22:00.777Z,1520670120.777 [BPC1] No Fault, FailCount= 1
2018-03-10T08:22:01.213Z,1520670121.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:22:01.575Z,1520670121.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:22:01.976Z,1520670121.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:22:02.372Z,1520670122.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:22:02.767Z,1520670122.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:22:03.168Z,1520670123.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:22:03.567Z,1520670123.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:22:03.961Z,1520670123.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:22:04.377Z,1520670124.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:22:04.770Z,1520670124.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:22:05.170Z,1520670125.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:22:05.563Z,1520670125.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:22:05.973Z,1520670125.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:22:06.373Z,1520670126.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:22:06.768Z,1520670126.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:22:07.167Z,1520670127.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:22:07.578Z,1520670127.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:22:07.979Z,1520670127.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:22:08.370Z,1520670128.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:22:08.769Z,1520670128.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:22:09.164Z,1520670129.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:22:09.568Z,1520670129.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:22:09.968Z,1520670129.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:22:10.385Z,1520670130.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:22:10.805Z,1520670130.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:22:11.197Z,1520670131.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:22:11.573Z,1520670131.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:22:12.035Z,1520670132.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:22:12.396Z,1520670132.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:22:12.818Z,1520670132.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:22:13.178Z,1520670133.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:22:13.569Z,1520670133.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:22:13.997Z,1520670133.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:22:14.392Z,1520670134.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:22:14.774Z,1520670134.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:22:15.178Z,1520670135.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:22:15.585Z,1520670135.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:22:15.976Z,1520670135.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:22:16.368Z,1520670136.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:22:16.774Z,1520670136.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:22:17.171Z,1520670137.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:22:17.567Z,1520670137.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:22:17.973Z,1520670137.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:22:18.370Z,1520670138.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:22:18.783Z,1520670138.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:22:19.154Z,1520670139.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:22:19.590Z,1520670139.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:22:19.986Z,1520670139.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:22:25.104Z,1520670145.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:22:25.297Z,1520670145.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:22:25.676Z,1520670145.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:22:26.012Z,1520670146.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:22:26.438Z,1520670146.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:22:26.840Z,1520670146.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:22:27.238Z,1520670147.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:22:27.637Z,1520670147.637 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:22:27.637Z,1520670147.637 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 62
2018-03-10T08:22:27.637Z,1520670147.637 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-03-10T08:22:27.643Z,1520670147.643 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:22:27.643Z,1520670147.643 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 62
2018-03-10T08:22:27.643Z,1520670147.643 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-03-10T08:22:27.645Z,1520670147.645 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:22:27.645Z,1520670147.645 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 62
2018-03-10T08:22:27.645Z,1520670147.645 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-10T08:22:27.669Z,1520670147.669 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-03-10T08:22:27.669Z,1520670147.669 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-03-10T08:22:27.670Z,1520670147.670 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-10T08:22:28.023Z,1520670148.023 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-03-10T08:22:28.023Z,1520670148.023 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 62
2018-03-10T08:22:28.024Z,1520670148.024 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-03-10T08:22:28.024Z,1520670148.024 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 62
2018-03-10T08:22:28.024Z,1520670148.024 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-10T08:22:28.024Z,1520670148.024 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 62
2018-03-10T08:22:28.412Z,1520670148.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-03-10T08:22:28.413Z,1520670148.413 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-03-10T08:22:28.413Z,1520670148.413 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-03-10T08:22:28.413Z,1520670148.413 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-03-10T08:22:28.414Z,1520670148.414 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-03-10T08:22:28.414Z,1520670148.414 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-03-10T08:22:28.415Z,1520670148.415 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-10T08:22:28.415Z,1520670148.415 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-10T08:22:28.415Z,1520670148.415 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-10T08:22:28.824Z,1520670148.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-03-10T08:22:28.825Z,1520670148.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:22:29.217Z,1520670149.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-03-10T08:22:29.218Z,1520670149.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:22:29.627Z,1520670149.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-03-10T08:22:29.628Z,1520670149.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:22:30.029Z,1520670150.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-03-10T08:22:30.030Z,1520670150.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:22:30.426Z,1520670150.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-03-10T08:22:30.427Z,1520670150.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:22:30.820Z,1520670150.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-03-10T08:22:30.821Z,1520670150.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:22:31.210Z,1520670151.210 [BPC1](FAULT): Failed to initialize
2018-03-10T08:22:31.210Z,1520670151.210 [BPC1] Communications Fault, FailCount= 2
2018-03-10T08:22:31.210Z,1520670151.210 [BPC1](ERROR): Communications Fault
2018-03-10T08:22:31.217Z,1520670151.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-03-10T08:22:31.218Z,1520670151.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:22:31.231Z,1520670151.231 [CBIT](ERROR): Communications Fault in component: BPC1
2018-03-10T08:22:31.617Z,1520670151.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-03-10T08:22:31.618Z,1520670151.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:22:32.018Z,1520670152.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-03-10T08:22:32.019Z,1520670152.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:22:32.425Z,1520670152.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-03-10T08:22:32.425Z,1520670152.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:22:32.438Z,1520670152.438 [CBIT](INFO): Clearing failed state for component BPC1
2018-03-10T08:22:32.438Z,1520670152.438 [BPC1] No Fault, FailCount= 2
2018-03-10T08:22:32.877Z,1520670152.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-03-10T08:22:32.878Z,1520670152.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:22:33.236Z,1520670153.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-03-10T08:22:33.237Z,1520670153.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:22:33.621Z,1520670153.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-03-10T08:22:33.622Z,1520670153.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:22:34.015Z,1520670154.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-03-10T08:22:34.016Z,1520670154.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:22:34.421Z,1520670154.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-03-10T08:22:34.422Z,1520670154.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:22:34.827Z,1520670154.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-03-10T08:22:34.828Z,1520670154.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:22:35.220Z,1520670155.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-03-10T08:22:35.221Z,1520670155.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:22:35.636Z,1520670155.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-03-10T08:22:35.637Z,1520670155.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:22:36.029Z,1520670156.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-03-10T08:22:36.030Z,1520670156.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:22:36.430Z,1520670156.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-03-10T08:22:36.431Z,1520670156.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:22:36.820Z,1520670156.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-03-10T08:22:36.821Z,1520670156.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:22:37.220Z,1520670157.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-03-10T08:22:37.221Z,1520670157.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:22:37.615Z,1520670157.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-03-10T08:22:37.616Z,1520670157.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:22:38.020Z,1520670158.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-03-10T08:22:38.021Z,1520670158.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:22:38.440Z,1520670158.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-03-10T08:22:38.441Z,1520670158.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:22:38.833Z,1520670158.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-03-10T08:22:38.834Z,1520670158.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:22:39.230Z,1520670159.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-03-10T08:22:39.231Z,1520670159.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:22:39.623Z,1520670159.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-03-10T08:22:39.624Z,1520670159.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:22:40.019Z,1520670160.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-03-10T08:22:40.020Z,1520670160.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:22:40.425Z,1520670160.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-03-10T08:22:40.426Z,1520670160.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:22:40.823Z,1520670160.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-03-10T08:22:40.824Z,1520670160.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:22:41.224Z,1520670161.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-03-10T08:22:41.225Z,1520670161.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:22:41.630Z,1520670161.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-03-10T08:22:41.631Z,1520670161.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:22:42.030Z,1520670162.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-03-10T08:22:42.031Z,1520670162.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:22:42.432Z,1520670162.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-03-10T08:22:42.433Z,1520670162.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:22:42.822Z,1520670162.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-03-10T08:22:42.823Z,1520670162.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:22:43.219Z,1520670163.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-03-10T08:22:43.220Z,1520670163.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:22:43.624Z,1520670163.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-03-10T08:22:43.625Z,1520670163.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:22:44.024Z,1520670164.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-03-10T08:22:44.025Z,1520670164.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:22:44.426Z,1520670164.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-03-10T08:22:44.427Z,1520670164.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:22:44.836Z,1520670164.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-03-10T08:22:44.837Z,1520670164.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:22:45.232Z,1520670165.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-03-10T08:22:45.232Z,1520670165.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:22:45.627Z,1520670165.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-03-10T08:22:45.628Z,1520670165.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:22:46.028Z,1520670166.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2018-03-10T08:22:46.029Z,1520670166.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:22:46.428Z,1520670166.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2018-03-10T08:22:46.428Z,1520670166.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:22:46.821Z,1520670166.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2018-03-10T08:22:46.822Z,1520670166.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:22:47.236Z,1520670167.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2018-03-10T08:22:47.237Z,1520670167.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:22:47.628Z,1520670167.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 20.0 s old, using for 20.0 s.
2018-03-10T08:22:47.629Z,1520670167.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:22:48.036Z,1520670168.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:22:48.435Z,1520670168.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:22:48.807Z,1520670168.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:22:49.210Z,1520670169.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:22:49.614Z,1520670169.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:22:50.014Z,1520670170.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:22:50.445Z,1520670170.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:22:50.841Z,1520670170.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:22:51.217Z,1520670171.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:22:51.617Z,1520670171.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:22:52.014Z,1520670172.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:22:52.412Z,1520670172.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:22:52.817Z,1520670172.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:22:53.213Z,1520670173.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:22:53.619Z,1520670173.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:22:54.040Z,1520670174.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:22:54.442Z,1520670174.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:22:54.819Z,1520670174.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:22:55.218Z,1520670175.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:22:55.618Z,1520670175.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:22:56.018Z,1520670176.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:22:56.444Z,1520670176.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:22:56.846Z,1520670176.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:22:57.225Z,1520670177.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:22:57.618Z,1520670177.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:22:58.017Z,1520670178.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:22:58.410Z,1520670178.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:22:58.817Z,1520670178.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:22:59.213Z,1520670179.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:22:59.624Z,1520670179.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:23:00.026Z,1520670180.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:23:00.423Z,1520670180.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:23:00.812Z,1520670180.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:23:01.221Z,1520670181.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:23:01.622Z,1520670181.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:23:02.021Z,1520670182.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:23:02.423Z,1520670182.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:23:02.825Z,1520670182.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:23:03.216Z,1520670183.216 [BPC1](FAULT): Failed to initialize
2018-03-10T08:23:03.216Z,1520670183.216 [BPC1] Communications Fault, FailCount= 3
2018-03-10T08:23:03.216Z,1520670183.216 [BPC1](ERROR): Communications Fault
2018-03-10T08:23:03.224Z,1520670183.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:23:03.252Z,1520670183.252 [CBIT](ERROR): Communications Fault in component: BPC1
2018-03-10T08:23:03.617Z,1520670183.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:23:04.013Z,1520670184.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:23:04.424Z,1520670184.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:23:04.438Z,1520670184.438 [CBIT](INFO): Clearing failed state for component BPC1
2018-03-10T08:23:04.438Z,1520670184.438 [BPC1] No Fault, FailCount= 3
2018-03-10T08:23:04.901Z,1520670184.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:23:05.218Z,1520670185.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:23:05.632Z,1520670185.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:23:06.026Z,1520670186.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:23:06.426Z,1520670186.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:23:06.813Z,1520670186.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:23:07.218Z,1520670187.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:23:07.618Z,1520670187.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:23:08.021Z,1520670188.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:23:08.425Z,1520670188.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:23:08.781Z,1520670188.781 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-03-10T08:23:08.781Z,1520670188.781 [NAL9602] Data Fault, FailCount= 3
2018-03-10T08:23:08.781Z,1520670188.781 [NAL9602](ERROR): Data Fault
2018-03-10T08:23:08.832Z,1520670188.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:23:08.869Z,1520670188.869 [CBIT](ERROR): Data Fault in component: NAL9602
2018-03-10T08:23:09.174Z,1520670189.174 [NAL9602](INFO): Powering down
2018-03-10T08:23:09.221Z,1520670189.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:23:09.625Z,1520670189.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:23:10.020Z,1520670190.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:23:10.033Z,1520670190.033 [CBIT](INFO): Clearing failed state for component NAL9602
2018-03-10T08:23:10.033Z,1520670190.033 [NAL9602] No Fault, FailCount= 3
2018-03-10T08:23:10.413Z,1520670190.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:23:10.816Z,1520670190.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:23:11.221Z,1520670191.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:23:11.617Z,1520670191.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:23:12.021Z,1520670192.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:23:12.420Z,1520670192.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:23:12.818Z,1520670192.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:23:13.224Z,1520670193.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:23:13.614Z,1520670193.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:23:14.021Z,1520670194.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:23:14.429Z,1520670194.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:23:14.822Z,1520670194.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:23:15.210Z,1520670195.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:23:15.623Z,1520670195.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:23:16.025Z,1520670196.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:23:16.413Z,1520670196.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:23:16.828Z,1520670196.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:23:17.230Z,1520670197.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:23:17.602Z,1520670197.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:23:18.027Z,1520670198.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:23:18.404Z,1520670198.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:23:18.806Z,1520670198.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:23:19.212Z,1520670199.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:23:19.616Z,1520670199.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:23:20.012Z,1520670200.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:23:23.141Z,1520670203.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:23:23.261Z,1520670203.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:23:23.614Z,1520670203.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:23:24.013Z,1520670204.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:23:24.413Z,1520670204.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:23:24.810Z,1520670204.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:23:25.212Z,1520670205.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:23:25.613Z,1520670205.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:23:26.010Z,1520670206.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:23:26.414Z,1520670206.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:23:26.814Z,1520670206.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:23:27.213Z,1520670207.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:23:27.614Z,1520670207.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:23:28.014Z,1520670208.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:23:28.414Z,1520670208.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:23:28.810Z,1520670208.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:23:29.209Z,1520670209.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:23:29.613Z,1520670209.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:23:30.014Z,1520670210.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:23:30.415Z,1520670210.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:23:30.818Z,1520670210.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:23:31.209Z,1520670211.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:23:31.609Z,1520670211.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:23:32.008Z,1520670212.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:23:32.411Z,1520670212.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:23:32.809Z,1520670212.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:23:33.216Z,1520670213.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:23:33.610Z,1520670213.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:23:34.016Z,1520670214.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:23:34.416Z,1520670214.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:23:34.810Z,1520670214.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:23:35.203Z,1520670215.203 [BPC1](FAULT): Failed to initialize
2018-03-10T08:23:35.203Z,1520670215.203 [BPC1] Communications Fault, FailCount= 4
2018-03-10T08:23:35.203Z,1520670215.203 [BPC1](ERROR): Communications Fault
2018-03-10T08:23:35.211Z,1520670215.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:23:35.224Z,1520670215.224 [CBIT](ERROR): Communications Fault in component: BPC1
2018-03-10T08:23:35.618Z,1520670215.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:23:36.014Z,1520670216.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:23:36.416Z,1520670216.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:23:36.429Z,1520670216.429 [CBIT](INFO): Clearing failed state for component BPC1
2018-03-10T08:23:36.429Z,1520670216.429 [BPC1] No Fault, FailCount= 4
2018-03-10T08:23:36.868Z,1520670216.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:23:37.217Z,1520670217.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:23:37.616Z,1520670217.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:23:38.012Z,1520670218.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:23:38.409Z,1520670218.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:23:38.816Z,1520670218.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:23:39.176Z,1520670219.176 [NAL9602](INFO): Powering up NAL9602
2018-03-10T08:23:39.222Z,1520670219.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:23:39.609Z,1520670219.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:23:40.010Z,1520670220.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:23:40.416Z,1520670220.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:23:40.820Z,1520670220.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:23:41.216Z,1520670221.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:23:41.615Z,1520670221.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:23:42.017Z,1520670222.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:23:42.416Z,1520670222.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:23:42.819Z,1520670222.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:23:43.208Z,1520670223.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:23:43.612Z,1520670223.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:23:44.016Z,1520670224.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:23:44.408Z,1520670224.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:23:44.816Z,1520670224.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:23:45.216Z,1520670225.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:23:45.612Z,1520670225.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:23:46.017Z,1520670226.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:23:46.423Z,1520670226.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:23:46.858Z,1520670226.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:23:47.231Z,1520670227.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:23:47.613Z,1520670227.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:23:48.030Z,1520670228.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:23:48.421Z,1520670228.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:23:48.832Z,1520670228.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:23:49.234Z,1520670229.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:23:49.628Z,1520670229.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:23:50.029Z,1520670230.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:23:50.368Z,1520670230.368 [NAL9602](INFO): NAL9602 initialized
2018-03-10T08:23:50.428Z,1520670230.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:23:50.825Z,1520670230.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:23:51.227Z,1520670231.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:23:51.621Z,1520670231.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:23:52.024Z,1520670232.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:23:52.423Z,1520670232.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:23:52.829Z,1520670232.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:23:53.231Z,1520670233.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:23:53.632Z,1520670233.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:23:54.026Z,1520670234.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:23:54.429Z,1520670234.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:23:54.833Z,1520670234.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:23:55.228Z,1520670235.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:23:55.633Z,1520670235.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:23:56.028Z,1520670236.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:23:56.404Z,1520670236.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:23:56.833Z,1520670236.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:23:57.229Z,1520670237.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:23:57.634Z,1520670237.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:23:58.057Z,1520670238.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:23:58.431Z,1520670238.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:23:58.830Z,1520670238.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:23:59.241Z,1520670239.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:23:59.633Z,1520670239.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:24:00.007Z,1520670240.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:24:00.413Z,1520670240.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:24:00.856Z,1520670240.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:24:01.237Z,1520670241.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:24:01.635Z,1520670241.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:24:02.005Z,1520670242.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:24:02.408Z,1520670242.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:24:02.819Z,1520670242.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:24:03.218Z,1520670243.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:24:03.614Z,1520670243.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:24:04.007Z,1520670244.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:24:04.474Z,1520670244.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:24:04.824Z,1520670244.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:24:05.227Z,1520670245.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:24:05.629Z,1520670245.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:24:06.017Z,1520670246.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:24:06.417Z,1520670246.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:24:06.854Z,1520670246.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:24:07.233Z,1520670247.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:24:07.630Z,1520670247.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:24:08.021Z,1520670248.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:24:08.419Z,1520670248.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:24:08.826Z,1520670248.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:24:09.234Z,1520670249.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:24:09.627Z,1520670249.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:24:10.023Z,1520670250.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:24:10.425Z,1520670250.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:24:10.826Z,1520670250.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:24:11.232Z,1520670251.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:24:11.627Z,1520670251.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:24:12.057Z,1520670252.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:24:12.428Z,1520670252.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:24:12.832Z,1520670252.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:24:13.230Z,1520670253.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:24:13.637Z,1520670253.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:24:14.020Z,1520670254.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:24:14.420Z,1520670254.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:24:14.828Z,1520670254.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:24:15.227Z,1520670255.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:24:15.632Z,1520670255.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:24:16.020Z,1520670256.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:24:16.422Z,1520670256.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:24:16.827Z,1520670256.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:24:17.231Z,1520670257.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:24:17.629Z,1520670257.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:24:18.026Z,1520670258.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:24:18.419Z,1520670258.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:24:18.835Z,1520670258.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:24:19.237Z,1520670259.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:24:19.633Z,1520670259.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:24:20.026Z,1520670260.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:24:20.420Z,1520670260.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:24:23.534Z,1520670263.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:24:23.714Z,1520670263.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:24:24.029Z,1520670264.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:24:24.425Z,1520670264.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:24:24.801Z,1520670264.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:24:25.198Z,1520670265.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:24:25.604Z,1520670265.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:24:26.026Z,1520670266.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:24:26.422Z,1520670266.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:24:26.823Z,1520670266.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:24:27.205Z,1520670267.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:24:27.601Z,1520670267.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:24:28.005Z,1520670268.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:24:28.409Z,1520670268.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:24:28.833Z,1520670268.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:24:29.235Z,1520670269.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:24:29.633Z,1520670269.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:24:30.009Z,1520670270.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:24:30.412Z,1520670270.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:24:30.832Z,1520670270.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:24:31.249Z,1520670271.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:24:31.644Z,1520670271.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:24:32.017Z,1520670272.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:24:32.413Z,1520670272.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:24:32.814Z,1520670272.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:24:33.221Z,1520670273.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:24:33.614Z,1520670273.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:24:34.011Z,1520670274.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:24:34.413Z,1520670274.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:24:34.820Z,1520670274.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:24:35.230Z,1520670275.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:24:35.625Z,1520670275.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:24:36.011Z,1520670276.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:24:36.409Z,1520670276.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:24:36.825Z,1520670276.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:24:37.225Z,1520670277.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:24:37.619Z,1520670277.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:24:38.010Z,1520670278.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:24:38.409Z,1520670278.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:24:38.825Z,1520670278.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:24:39.222Z,1520670279.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:24:39.615Z,1520670279.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:24:40.051Z,1520670280.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:24:40.408Z,1520670280.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:24:40.817Z,1520670280.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:24:41.229Z,1520670281.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:24:41.620Z,1520670281.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:24:42.010Z,1520670282.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:24:42.420Z,1520670282.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:24:42.823Z,1520670282.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:24:43.222Z,1520670283.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:24:43.630Z,1520670283.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:24:44.025Z,1520670284.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:24:44.410Z,1520670284.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:24:44.833Z,1520670284.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:24:45.229Z,1520670285.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:24:45.629Z,1520670285.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:24:46.014Z,1520670286.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:24:46.426Z,1520670286.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:24:46.845Z,1520670286.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:24:47.230Z,1520670287.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:24:47.627Z,1520670287.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:24:48.002Z,1520670288.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:24:48.404Z,1520670288.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:24:48.825Z,1520670288.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:24:49.229Z,1520670289.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:24:49.622Z,1520670289.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:24:50.026Z,1520670290.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:24:50.433Z,1520670290.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:24:50.831Z,1520670290.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:24:51.232Z,1520670291.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:24:51.634Z,1520670291.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:24:52.004Z,1520670292.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:24:52.405Z,1520670292.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:24:52.834Z,1520670292.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:24:53.243Z,1520670293.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:24:53.632Z,1520670293.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:24:54.009Z,1520670294.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:24:54.405Z,1520670294.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:24:54.833Z,1520670294.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:24:55.228Z,1520670295.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:24:55.635Z,1520670295.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:24:56.015Z,1520670296.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:24:56.442Z,1520670296.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:24:56.820Z,1520670296.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:24:57.221Z,1520670297.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:24:57.619Z,1520670297.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:24:58.021Z,1520670298.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:24:58.409Z,1520670298.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:24:58.815Z,1520670298.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:24:59.215Z,1520670299.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:24:59.626Z,1520670299.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:25:00.011Z,1520670300.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:25:00.403Z,1520670300.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:25:00.819Z,1520670300.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:25:01.229Z,1520670301.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:25:01.620Z,1520670301.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:25:02.012Z,1520670302.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:25:02.411Z,1520670302.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:25:02.820Z,1520670302.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:25:03.215Z,1520670303.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:25:03.625Z,1520670303.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:25:04.013Z,1520670304.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:25:04.410Z,1520670304.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:25:04.817Z,1520670304.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:25:05.220Z,1520670305.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:25:05.621Z,1520670305.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:25:06.013Z,1520670306.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:25:06.408Z,1520670306.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:25:06.814Z,1520670306.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:25:07.225Z,1520670307.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:25:07.620Z,1520670307.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:25:08.016Z,1520670308.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:25:08.412Z,1520670308.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:25:08.827Z,1520670308.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:25:09.241Z,1520670309.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:25:09.640Z,1520670309.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:25:10.016Z,1520670310.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:25:10.416Z,1520670310.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:25:10.820Z,1520670310.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:25:11.224Z,1520670311.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:25:11.620Z,1520670311.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:25:12.005Z,1520670312.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:25:12.424Z,1520670312.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:25:12.811Z,1520670312.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:25:13.226Z,1520670313.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:25:13.624Z,1520670313.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:25:14.025Z,1520670314.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:25:14.405Z,1520670314.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:25:14.828Z,1520670314.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:25:15.207Z,1520670315.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:25:15.628Z,1520670315.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:25:16.006Z,1520670316.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:25:16.406Z,1520670316.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:25:16.828Z,1520670316.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:25:17.232Z,1520670317.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:25:17.623Z,1520670317.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:25:18.003Z,1520670318.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:25:18.402Z,1520670318.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:25:18.832Z,1520670318.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:25:19.231Z,1520670319.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:25:19.234Z,1520670319.234 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-03-10T08:25:19.234Z,1520670319.234 [Default:CheckIn:C.Wait] Stopped
2018-03-10T08:25:19.234Z,1520670319.234 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-03-10T08:25:19.234Z,1520670319.234 [Default:CheckIn:D] Running Loop=1
2018-03-10T08:25:19.630Z,1520670319.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:25:19.633Z,1520670319.633 [Default:CheckIn:D] Stopped
2018-03-10T08:25:19.633Z,1520670319.633 [Default:CheckIn:E] Running Loop=1
2018-03-10T08:25:20.043Z,1520670320.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:25:20.047Z,1520670320.047 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 186.028548 min 
2018-03-10T08:25:20.047Z,1520670320.047 [Default:CheckIn:E] Stopped
2018-03-10T08:25:20.047Z,1520670320.047 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-03-10T08:25:20.047Z,1520670320.047 [Default:CheckIn] Stopped
2018-03-10T08:25:20.047Z,1520670320.047 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-03-10T08:25:20.048Z,1520670320.048 [Default:CheckIn](INFO): Running loop #19
2018-03-10T08:25:20.048Z,1520670320.048 [Default:CheckIn] Running Loop=19
2018-03-10T08:25:20.048Z,1520670320.048 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-03-10T08:25:20.048Z,1520670320.048 [Default:CheckIn:Read_GPS] Running Loop=1
2018-03-10T08:25:20.413Z,1520670320.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:25:20.840Z,1520670320.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:25:21.216Z,1520670321.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:25:21.611Z,1520670321.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:25:22.016Z,1520670322.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:25:25.144Z,1520670325.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:25:25.289Z,1520670325.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:25:25.640Z,1520670325.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:25:26.021Z,1520670326.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:25:26.417Z,1520670326.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:25:26.814Z,1520670326.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:25:27.220Z,1520670327.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:25:27.614Z,1520670327.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:25:27.644Z,1520670327.644 [CBIT](DEBUG): EFC running - data check-sum false
2018-03-10T08:25:28.046Z,1520670328.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:25:28.426Z,1520670328.426 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:25:28.426Z,1520670328.426 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 63
2018-03-10T08:25:28.426Z,1520670328.426 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-03-10T08:25:28.448Z,1520670328.448 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:25:28.449Z,1520670328.449 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 63
2018-03-10T08:25:28.449Z,1520670328.449 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-03-10T08:25:28.450Z,1520670328.450 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:25:28.450Z,1520670328.450 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 63
2018-03-10T08:25:28.450Z,1520670328.450 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-10T08:25:28.483Z,1520670328.483 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-03-10T08:25:28.483Z,1520670328.483 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-03-10T08:25:28.484Z,1520670328.484 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-10T08:25:28.841Z,1520670328.841 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-03-10T08:25:28.841Z,1520670328.841 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 63
2018-03-10T08:25:28.841Z,1520670328.841 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-03-10T08:25:28.841Z,1520670328.841 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 63
2018-03-10T08:25:28.842Z,1520670328.842 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-10T08:25:28.842Z,1520670328.842 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 63
2018-03-10T08:25:29.217Z,1520670329.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-03-10T08:25:29.217Z,1520670329.217 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-03-10T08:25:29.217Z,1520670329.217 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-03-10T08:25:29.218Z,1520670329.218 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-03-10T08:25:29.218Z,1520670329.218 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-03-10T08:25:29.218Z,1520670329.218 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-03-10T08:25:29.219Z,1520670329.219 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-10T08:25:29.219Z,1520670329.219 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-10T08:25:29.220Z,1520670329.220 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-10T08:25:29.615Z,1520670329.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-03-10T08:25:29.616Z,1520670329.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:25:30.019Z,1520670330.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-03-10T08:25:30.020Z,1520670330.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:25:30.421Z,1520670330.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-03-10T08:25:30.422Z,1520670330.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:25:30.825Z,1520670330.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-03-10T08:25:30.826Z,1520670330.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:25:31.234Z,1520670331.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-03-10T08:25:31.239Z,1520670331.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:25:31.637Z,1520670331.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-03-10T08:25:31.638Z,1520670331.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:25:32.032Z,1520670332.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-03-10T08:25:32.033Z,1520670332.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:25:32.428Z,1520670332.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-03-10T08:25:32.429Z,1520670332.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:25:32.836Z,1520670332.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-03-10T08:25:32.837Z,1520670332.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:25:33.231Z,1520670333.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-03-10T08:25:33.232Z,1520670333.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:25:33.637Z,1520670333.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-03-10T08:25:33.638Z,1520670333.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:25:34.028Z,1520670334.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-03-10T08:25:34.029Z,1520670334.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:25:34.427Z,1520670334.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-03-10T08:25:34.428Z,1520670334.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:25:34.841Z,1520670334.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-03-10T08:25:34.842Z,1520670334.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:25:35.236Z,1520670335.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-03-10T08:25:35.236Z,1520670335.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:25:35.641Z,1520670335.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-03-10T08:25:35.641Z,1520670335.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:25:36.031Z,1520670336.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-03-10T08:25:36.032Z,1520670336.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:25:36.432Z,1520670336.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-03-10T08:25:36.433Z,1520670336.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:25:36.861Z,1520670336.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-03-10T08:25:36.862Z,1520670336.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:25:37.235Z,1520670337.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-03-10T08:25:37.236Z,1520670337.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:25:37.640Z,1520670337.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-03-10T08:25:37.640Z,1520670337.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:25:38.036Z,1520670338.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-03-10T08:25:38.037Z,1520670338.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:25:38.431Z,1520670338.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-03-10T08:25:38.432Z,1520670338.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:25:38.833Z,1520670338.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-03-10T08:25:38.834Z,1520670338.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:25:39.241Z,1520670339.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-03-10T08:25:39.242Z,1520670339.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:25:39.640Z,1520670339.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-03-10T08:25:39.641Z,1520670339.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:25:40.008Z,1520670340.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-03-10T08:25:40.009Z,1520670340.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:25:40.412Z,1520670340.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-03-10T08:25:40.413Z,1520670340.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:25:40.838Z,1520670340.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-03-10T08:25:40.839Z,1520670340.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:25:41.240Z,1520670341.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-03-10T08:25:41.241Z,1520670341.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:25:41.638Z,1520670341.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-03-10T08:25:41.643Z,1520670341.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:25:42.018Z,1520670342.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-03-10T08:25:42.019Z,1520670342.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:25:42.414Z,1520670342.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-03-10T08:25:42.415Z,1520670342.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:25:42.856Z,1520670342.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-03-10T08:25:42.857Z,1520670342.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:25:43.243Z,1520670343.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-03-10T08:25:43.244Z,1520670343.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:25:43.646Z,1520670343.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-03-10T08:25:43.646Z,1520670343.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:25:44.018Z,1520670344.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-03-10T08:25:44.019Z,1520670344.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:25:44.418Z,1520670344.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-03-10T08:25:44.420Z,1520670344.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:25:44.844Z,1520670344.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-03-10T08:25:44.845Z,1520670344.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:25:45.244Z,1520670345.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-03-10T08:25:45.245Z,1520670345.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:25:45.619Z,1520670345.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-03-10T08:25:45.620Z,1520670345.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:25:46.017Z,1520670346.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-03-10T08:25:46.017Z,1520670346.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:25:46.418Z,1520670346.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-03-10T08:25:46.420Z,1520670346.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:25:46.843Z,1520670346.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2018-03-10T08:25:46.844Z,1520670346.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:25:47.242Z,1520670347.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2018-03-10T08:25:47.243Z,1520670347.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:25:47.644Z,1520670347.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2018-03-10T08:25:47.645Z,1520670347.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:25:48.019Z,1520670348.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2018-03-10T08:25:48.020Z,1520670348.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:25:48.418Z,1520670348.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 20.0 s old, using for 20.0 s.
2018-03-10T08:25:48.418Z,1520670348.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:25:48.852Z,1520670348.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:25:49.230Z,1520670349.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:25:49.627Z,1520670349.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:25:50.021Z,1520670350.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:25:50.423Z,1520670350.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:25:50.854Z,1520670350.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:25:51.228Z,1520670351.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:25:51.625Z,1520670351.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:25:52.023Z,1520670352.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:25:52.425Z,1520670352.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:25:52.825Z,1520670352.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:25:53.227Z,1520670353.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:25:53.627Z,1520670353.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:25:54.025Z,1520670354.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:25:54.454Z,1520670354.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:25:54.826Z,1520670354.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:25:55.227Z,1520670355.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:25:55.627Z,1520670355.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:25:56.015Z,1520670356.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:25:56.418Z,1520670356.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:25:56.828Z,1520670356.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:25:57.226Z,1520670357.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:25:57.625Z,1520670357.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:25:58.019Z,1520670358.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:25:58.421Z,1520670358.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:25:58.833Z,1520670358.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:25:59.228Z,1520670359.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:25:59.627Z,1520670359.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:26:00.029Z,1520670360.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:26:00.449Z,1520670360.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:26:00.831Z,1520670360.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:26:01.237Z,1520670361.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:26:01.637Z,1520670361.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:26:02.022Z,1520670362.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:26:02.419Z,1520670362.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:26:02.847Z,1520670362.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:26:03.257Z,1520670363.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:26:03.637Z,1520670363.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:26:04.024Z,1520670364.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:26:04.418Z,1520670364.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:26:04.833Z,1520670364.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:26:05.237Z,1520670365.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:26:05.638Z,1520670365.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:26:06.029Z,1520670366.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:26:06.422Z,1520670366.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:26:06.837Z,1520670366.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:26:07.241Z,1520670367.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:26:07.633Z,1520670367.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:26:08.025Z,1520670368.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:26:08.420Z,1520670368.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:26:08.838Z,1520670368.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:26:09.235Z,1520670369.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:26:09.638Z,1520670369.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:26:10.025Z,1520670370.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:26:10.424Z,1520670370.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:26:10.833Z,1520670370.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:26:11.237Z,1520670371.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:26:11.631Z,1520670371.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:26:12.019Z,1520670372.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:26:12.422Z,1520670372.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:26:12.831Z,1520670372.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:26:13.238Z,1520670373.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:26:13.636Z,1520670373.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:26:14.021Z,1520670374.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:26:14.428Z,1520670374.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:26:14.832Z,1520670374.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:26:15.241Z,1520670375.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:26:15.653Z,1520670375.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:26:16.029Z,1520670376.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:26:16.428Z,1520670376.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:26:16.834Z,1520670376.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:26:17.241Z,1520670377.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:26:17.631Z,1520670377.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:26:18.028Z,1520670378.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:26:18.431Z,1520670378.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:26:18.833Z,1520670378.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:26:19.234Z,1520670379.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:26:19.637Z,1520670379.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:26:20.031Z,1520670380.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:26:20.427Z,1520670380.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:26:20.835Z,1520670380.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:26:21.234Z,1520670381.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:26:21.633Z,1520670381.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:26:22.005Z,1520670382.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:26:25.132Z,1520670385.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:26:25.281Z,1520670385.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:26:25.628Z,1520670385.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:26:26.031Z,1520670386.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:26:26.405Z,1520670386.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:26:26.806Z,1520670386.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:26:27.203Z,1520670387.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:26:27.628Z,1520670387.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:26:28.061Z,1520670388.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:26:28.441Z,1520670388.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:26:28.811Z,1520670388.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:26:29.206Z,1520670389.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:26:29.608Z,1520670389.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:26:30.006Z,1520670390.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:26:30.405Z,1520670390.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:26:30.824Z,1520670390.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:26:31.222Z,1520670391.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:26:31.620Z,1520670391.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:26:32.017Z,1520670392.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:26:32.417Z,1520670392.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:26:32.825Z,1520670392.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:26:33.250Z,1520670393.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:26:33.620Z,1520670393.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:26:34.007Z,1520670394.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:26:34.422Z,1520670394.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:26:34.825Z,1520670394.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:26:35.219Z,1520670395.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:26:35.629Z,1520670395.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:26:36.010Z,1520670396.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:26:36.413Z,1520670396.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:26:36.821Z,1520670396.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:26:37.222Z,1520670397.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:26:37.621Z,1520670397.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:26:38.010Z,1520670398.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:26:38.413Z,1520670398.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:26:38.817Z,1520670398.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:26:39.220Z,1520670399.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:26:39.619Z,1520670399.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:26:40.018Z,1520670400.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:26:40.417Z,1520670400.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:26:40.825Z,1520670400.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:26:41.225Z,1520670401.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:26:41.621Z,1520670401.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:26:42.007Z,1520670402.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:26:42.421Z,1520670402.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:26:42.825Z,1520670402.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:26:43.233Z,1520670403.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:26:43.621Z,1520670403.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:26:44.005Z,1520670404.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:26:44.424Z,1520670404.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:26:44.810Z,1520670404.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:26:45.215Z,1520670405.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:26:45.612Z,1520670405.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:26:46.017Z,1520670406.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:26:46.408Z,1520670406.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:26:46.812Z,1520670406.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:26:47.211Z,1520670407.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:26:47.611Z,1520670407.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:26:48.013Z,1520670408.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:26:48.408Z,1520670408.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:26:48.815Z,1520670408.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:26:49.219Z,1520670409.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:26:49.615Z,1520670409.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:26:50.017Z,1520670410.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:26:50.410Z,1520670410.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:26:50.817Z,1520670410.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:26:51.225Z,1520670411.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:26:51.625Z,1520670411.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:26:52.013Z,1520670412.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:26:52.418Z,1520670412.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:26:52.833Z,1520670412.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:26:53.229Z,1520670413.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:26:53.620Z,1520670413.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:26:54.011Z,1520670414.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:26:54.416Z,1520670414.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:26:54.821Z,1520670414.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:26:55.229Z,1520670415.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:26:55.626Z,1520670415.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:26:56.016Z,1520670416.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:26:56.410Z,1520670416.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:26:56.816Z,1520670416.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:26:57.216Z,1520670417.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:26:57.629Z,1520670417.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:26:58.011Z,1520670418.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:26:58.411Z,1520670418.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:26:58.820Z,1520670418.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:26:59.219Z,1520670419.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:26:59.621Z,1520670419.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:27:00.010Z,1520670420.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:27:00.413Z,1520670420.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:27:00.820Z,1520670420.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:27:01.223Z,1520670421.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:27:01.620Z,1520670421.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:27:02.012Z,1520670422.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:27:02.412Z,1520670422.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:27:02.817Z,1520670422.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:27:03.232Z,1520670423.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:27:03.620Z,1520670423.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:27:04.016Z,1520670424.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:27:04.411Z,1520670424.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:27:04.825Z,1520670424.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:27:05.230Z,1520670425.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:27:05.641Z,1520670425.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:27:06.011Z,1520670426.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:27:06.415Z,1520670426.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:27:06.820Z,1520670426.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:27:07.221Z,1520670427.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:27:07.623Z,1520670427.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:27:08.025Z,1520670428.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:27:08.410Z,1520670428.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:27:08.815Z,1520670428.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:27:09.219Z,1520670429.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:27:09.616Z,1520670429.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:27:10.040Z,1520670430.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:27:10.411Z,1520670430.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:27:10.829Z,1520670430.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:27:11.229Z,1520670431.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:27:11.619Z,1520670431.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:27:12.012Z,1520670432.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:27:12.415Z,1520670432.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:27:12.820Z,1520670432.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:27:13.223Z,1520670433.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:27:13.617Z,1520670433.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:27:14.005Z,1520670434.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:27:14.415Z,1520670434.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:27:14.837Z,1520670434.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:27:15.222Z,1520670435.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:27:15.629Z,1520670435.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:27:16.020Z,1520670436.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:27:16.396Z,1520670436.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:27:16.822Z,1520670436.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:27:17.227Z,1520670437.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:27:17.629Z,1520670437.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:27:18.020Z,1520670438.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:27:18.417Z,1520670438.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:27:18.824Z,1520670438.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:27:19.227Z,1520670439.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:27:19.667Z,1520670439.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:27:20.026Z,1520670440.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:27:20.400Z,1520670440.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:27:20.832Z,1520670440.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:27:21.229Z,1520670441.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:27:24.323Z,1520670444.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:27:24.445Z,1520670444.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:27:24.809Z,1520670444.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:27:25.203Z,1520670445.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:27:25.605Z,1520670445.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:27:26.012Z,1520670446.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:27:26.412Z,1520670446.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:27:26.807Z,1520670446.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:27:27.202Z,1520670447.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:27:27.601Z,1520670447.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:27:28.009Z,1520670448.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:27:28.405Z,1520670448.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:27:28.808Z,1520670448.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:27:29.211Z,1520670449.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:27:29.618Z,1520670449.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:27:30.011Z,1520670450.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:27:30.421Z,1520670450.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:27:30.841Z,1520670450.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:27:31.215Z,1520670451.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:27:31.613Z,1520670451.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:27:32.007Z,1520670452.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:27:32.409Z,1520670452.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:27:32.814Z,1520670452.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:27:33.214Z,1520670453.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:27:33.616Z,1520670453.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:27:34.006Z,1520670454.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:27:34.403Z,1520670454.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:27:34.812Z,1520670454.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:27:35.216Z,1520670455.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:27:35.615Z,1520670455.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:27:36.005Z,1520670456.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:27:36.402Z,1520670456.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:27:36.820Z,1520670456.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:27:37.218Z,1520670457.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:27:37.615Z,1520670457.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:27:38.004Z,1520670458.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:27:38.404Z,1520670458.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:27:38.812Z,1520670458.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:27:39.224Z,1520670459.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:27:39.625Z,1520670459.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:27:40.004Z,1520670460.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:27:40.403Z,1520670460.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:27:40.815Z,1520670460.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:27:41.215Z,1520670461.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:27:41.629Z,1520670461.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:27:42.025Z,1520670462.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:27:42.406Z,1520670462.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:27:42.820Z,1520670462.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:27:43.225Z,1520670463.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:27:43.633Z,1520670463.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:27:44.004Z,1520670464.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:27:44.407Z,1520670464.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:27:44.812Z,1520670464.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:27:45.223Z,1520670465.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:27:45.612Z,1520670465.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:27:46.003Z,1520670466.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:27:46.403Z,1520670466.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:27:46.812Z,1520670466.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:27:47.254Z,1520670467.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:27:47.629Z,1520670467.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:27:48.020Z,1520670468.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:27:48.439Z,1520670468.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:27:48.825Z,1520670468.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:27:49.220Z,1520670469.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:27:49.616Z,1520670469.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:27:50.038Z,1520670470.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:27:50.400Z,1520670470.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:27:50.841Z,1520670470.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:27:51.237Z,1520670471.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:27:51.611Z,1520670471.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:27:52.002Z,1520670472.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:27:52.404Z,1520670472.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:27:52.816Z,1520670472.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:27:53.239Z,1520670473.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:27:53.615Z,1520670473.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:27:54.006Z,1520670474.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:27:54.404Z,1520670474.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:27:54.826Z,1520670474.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:27:55.226Z,1520670475.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:27:55.633Z,1520670475.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:27:56.009Z,1520670476.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:27:56.416Z,1520670476.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:27:56.813Z,1520670476.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:27:57.225Z,1520670477.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:27:57.617Z,1520670477.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:27:58.007Z,1520670478.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:27:58.417Z,1520670478.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:27:58.818Z,1520670478.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:27:59.216Z,1520670479.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:27:59.620Z,1520670479.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:28:00.011Z,1520670480.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:28:00.417Z,1520670480.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:28:00.822Z,1520670480.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:28:01.225Z,1520670481.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:28:01.621Z,1520670481.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:28:02.009Z,1520670482.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:28:02.418Z,1520670482.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:28:02.822Z,1520670482.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:28:03.229Z,1520670483.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:28:03.618Z,1520670483.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:28:04.032Z,1520670484.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:28:04.429Z,1520670484.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:28:04.816Z,1520670484.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:28:05.223Z,1520670485.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:28:05.626Z,1520670485.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:28:06.003Z,1520670486.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:28:06.399Z,1520670486.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:28:06.832Z,1520670486.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:28:07.234Z,1520670487.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:28:07.637Z,1520670487.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:28:08.004Z,1520670488.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:28:08.404Z,1520670488.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:28:08.808Z,1520670488.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:28:09.211Z,1520670489.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:28:09.608Z,1520670489.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:28:10.001Z,1520670490.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:28:10.405Z,1520670490.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:28:10.810Z,1520670490.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:28:11.207Z,1520670491.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:28:11.611Z,1520670491.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:28:12.009Z,1520670492.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:28:12.404Z,1520670492.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:28:12.808Z,1520670492.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:28:13.209Z,1520670493.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:28:13.610Z,1520670493.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:28:14.004Z,1520670494.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:28:14.399Z,1520670494.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:28:14.817Z,1520670494.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:28:15.217Z,1520670495.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:28:15.642Z,1520670495.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:28:16.001Z,1520670496.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:28:16.406Z,1520670496.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:28:16.817Z,1520670496.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:28:17.218Z,1520670497.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:28:17.620Z,1520670497.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:28:18.013Z,1520670498.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:28:18.412Z,1520670498.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:28:18.825Z,1520670498.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:28:19.217Z,1520670499.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:28:19.616Z,1520670499.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:28:20.098Z,1520670500.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:28:20.421Z,1520670500.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:28:20.816Z,1520670500.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:28:21.211Z,1520670501.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:28:21.607Z,1520670501.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:28:25.133Z,1520670505.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:28:25.265Z,1520670505.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:28:25.639Z,1520670505.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:28:26.038Z,1520670506.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:28:26.461Z,1520670506.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:28:26.841Z,1520670506.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:28:27.234Z,1520670507.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:28:27.637Z,1520670507.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:28:28.034Z,1520670508.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:28:28.434Z,1520670508.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:28:28.838Z,1520670508.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:28:29.241Z,1520670509.241 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:28:29.241Z,1520670509.241 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 64
2018-03-10T08:28:29.241Z,1520670509.241 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-03-10T08:28:29.242Z,1520670509.242 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:28:29.243Z,1520670509.243 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 64
2018-03-10T08:28:29.243Z,1520670509.243 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-03-10T08:28:29.244Z,1520670509.244 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:28:29.244Z,1520670509.244 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 64
2018-03-10T08:28:29.244Z,1520670509.244 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-10T08:28:29.286Z,1520670509.286 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-03-10T08:28:29.287Z,1520670509.287 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-03-10T08:28:29.287Z,1520670509.287 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-10T08:28:29.644Z,1520670509.644 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-03-10T08:28:29.644Z,1520670509.644 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 64
2018-03-10T08:28:29.645Z,1520670509.645 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-03-10T08:28:29.645Z,1520670509.645 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 64
2018-03-10T08:28:29.645Z,1520670509.645 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-10T08:28:29.645Z,1520670509.645 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 64
2018-03-10T08:28:30.033Z,1520670510.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-03-10T08:28:30.033Z,1520670510.033 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-03-10T08:28:30.033Z,1520670510.033 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-03-10T08:28:30.034Z,1520670510.034 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-03-10T08:28:30.034Z,1520670510.034 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-03-10T08:28:30.034Z,1520670510.034 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-03-10T08:28:30.035Z,1520670510.035 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-10T08:28:30.035Z,1520670510.035 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-10T08:28:30.036Z,1520670510.036 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-10T08:28:30.434Z,1520670510.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-03-10T08:28:30.435Z,1520670510.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:28:30.843Z,1520670510.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-03-10T08:28:30.844Z,1520670510.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:28:31.241Z,1520670511.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-03-10T08:28:31.242Z,1520670511.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:28:31.641Z,1520670511.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-03-10T08:28:31.641Z,1520670511.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:28:32.035Z,1520670512.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-03-10T08:28:32.036Z,1520670512.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:28:32.442Z,1520670512.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-03-10T08:28:32.444Z,1520670512.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:28:32.849Z,1520670512.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-03-10T08:28:32.850Z,1520670512.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:28:33.252Z,1520670513.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-03-10T08:28:33.253Z,1520670513.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:28:33.648Z,1520670513.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-03-10T08:28:33.649Z,1520670513.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:28:34.030Z,1520670514.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-03-10T08:28:34.031Z,1520670514.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:28:34.438Z,1520670514.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-03-10T08:28:34.438Z,1520670514.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:28:34.852Z,1520670514.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-03-10T08:28:34.853Z,1520670514.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:28:35.244Z,1520670515.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-03-10T08:28:35.245Z,1520670515.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:28:35.652Z,1520670515.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-03-10T08:28:35.653Z,1520670515.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:28:36.034Z,1520670516.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-03-10T08:28:36.035Z,1520670516.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:28:36.426Z,1520670516.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-03-10T08:28:36.427Z,1520670516.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:28:36.927Z,1520670516.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.7 s old, using for 20.0 s.
2018-03-10T08:28:36.928Z,1520670516.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:28:37.245Z,1520670517.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-03-10T08:28:37.246Z,1520670517.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:28:37.647Z,1520670517.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-03-10T08:28:37.648Z,1520670517.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:28:38.056Z,1520670518.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-03-10T08:28:38.057Z,1520670518.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:28:38.430Z,1520670518.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-03-10T08:28:38.431Z,1520670518.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:28:38.844Z,1520670518.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-03-10T08:28:38.845Z,1520670518.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:28:39.252Z,1520670519.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-03-10T08:28:39.253Z,1520670519.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:28:39.647Z,1520670519.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-03-10T08:28:39.648Z,1520670519.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:28:40.037Z,1520670520.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-03-10T08:28:40.038Z,1520670520.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:28:40.440Z,1520670520.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-03-10T08:28:40.441Z,1520670520.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:28:40.848Z,1520670520.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-03-10T08:28:40.849Z,1520670520.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:28:41.252Z,1520670521.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-03-10T08:28:41.253Z,1520670521.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:28:41.641Z,1520670521.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-03-10T08:28:41.642Z,1520670521.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:28:42.044Z,1520670522.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-03-10T08:28:42.045Z,1520670522.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:28:42.438Z,1520670522.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-03-10T08:28:42.439Z,1520670522.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:28:42.876Z,1520670522.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-03-10T08:28:42.877Z,1520670522.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:28:43.256Z,1520670523.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-03-10T08:28:43.257Z,1520670523.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:28:43.644Z,1520670523.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-03-10T08:28:43.644Z,1520670523.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:28:44.036Z,1520670524.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-03-10T08:28:44.037Z,1520670524.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:28:44.438Z,1520670524.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-03-10T08:28:44.440Z,1520670524.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:28:44.858Z,1520670524.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-03-10T08:28:44.859Z,1520670524.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:28:45.287Z,1520670525.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-03-10T08:28:45.288Z,1520670525.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:28:45.652Z,1520670525.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-03-10T08:28:45.653Z,1520670525.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:28:46.044Z,1520670526.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-03-10T08:28:46.045Z,1520670526.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:28:46.439Z,1520670526.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-03-10T08:28:46.440Z,1520670526.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:28:46.851Z,1520670526.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-03-10T08:28:46.852Z,1520670526.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:28:47.256Z,1520670527.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-03-10T08:28:47.257Z,1520670527.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:28:47.644Z,1520670527.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2018-03-10T08:28:47.645Z,1520670527.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:28:48.039Z,1520670528.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2018-03-10T08:28:48.040Z,1520670528.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:28:48.444Z,1520670528.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2018-03-10T08:28:48.445Z,1520670528.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:28:48.856Z,1520670528.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2018-03-10T08:28:48.857Z,1520670528.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:28:49.257Z,1520670529.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:28:49.668Z,1520670529.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:28:50.019Z,1520670530.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:28:50.445Z,1520670530.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:28:50.847Z,1520670530.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:28:51.248Z,1520670531.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:28:51.650Z,1520670531.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:28:52.052Z,1520670532.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:28:52.429Z,1520670532.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:28:52.850Z,1520670532.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:28:53.256Z,1520670533.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:28:53.657Z,1520670533.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:28:54.027Z,1520670534.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:28:54.425Z,1520670534.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:28:54.871Z,1520670534.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:28:55.258Z,1520670535.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:28:55.665Z,1520670535.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:28:56.053Z,1520670536.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:28:56.429Z,1520670536.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:28:56.872Z,1520670536.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:28:57.261Z,1520670537.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:28:57.638Z,1520670537.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:28:58.027Z,1520670538.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:28:58.429Z,1520670538.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:28:58.859Z,1520670538.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:28:59.263Z,1520670539.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:28:59.630Z,1520670539.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:29:00.032Z,1520670540.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:29:00.428Z,1520670540.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:29:00.849Z,1520670540.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:29:01.245Z,1520670541.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:29:01.648Z,1520670541.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:29:02.030Z,1520670542.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:29:02.437Z,1520670542.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:29:02.848Z,1520670542.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:29:03.246Z,1520670543.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:29:03.642Z,1520670543.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:29:04.045Z,1520670544.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:29:04.434Z,1520670544.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:29:04.846Z,1520670544.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:29:05.245Z,1520670545.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:29:05.649Z,1520670545.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:29:06.033Z,1520670546.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:29:06.436Z,1520670546.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:29:06.847Z,1520670546.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:29:07.245Z,1520670547.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:29:07.648Z,1520670547.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:29:08.041Z,1520670548.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:29:08.457Z,1520670548.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:29:08.845Z,1520670548.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:29:09.246Z,1520670549.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:29:09.676Z,1520670549.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:29:10.040Z,1520670550.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:29:10.430Z,1520670550.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:29:10.853Z,1520670550.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:29:11.252Z,1520670551.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:29:11.645Z,1520670551.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:29:12.037Z,1520670552.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:29:12.435Z,1520670552.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:29:12.837Z,1520670552.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:29:13.249Z,1520670553.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:29:13.648Z,1520670553.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:29:14.034Z,1520670554.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:29:14.434Z,1520670554.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:29:14.856Z,1520670554.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:29:15.251Z,1520670555.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:29:15.649Z,1520670555.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:29:16.046Z,1520670556.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:29:16.441Z,1520670556.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:29:16.845Z,1520670556.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:29:17.252Z,1520670557.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:29:17.657Z,1520670557.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:29:18.040Z,1520670558.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:29:18.426Z,1520670558.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:29:18.854Z,1520670558.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:29:19.252Z,1520670559.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:29:19.655Z,1520670559.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:29:20.025Z,1520670560.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:29:20.429Z,1520670560.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:29:20.866Z,1520670560.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:29:21.277Z,1520670561.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:29:21.661Z,1520670561.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:29:24.755Z,1520670564.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:29:24.869Z,1520670564.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:29:25.250Z,1520670565.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:29:25.630Z,1520670565.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:29:26.050Z,1520670566.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:29:26.425Z,1520670566.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:29:26.824Z,1520670566.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:29:27.230Z,1520670567.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:29:27.625Z,1520670567.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:29:28.031Z,1520670568.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:29:28.431Z,1520670568.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:29:28.860Z,1520670568.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:29:29.226Z,1520670569.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:29:29.625Z,1520670569.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:29:30.027Z,1520670570.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:29:30.425Z,1520670570.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:29:30.831Z,1520670570.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:29:31.230Z,1520670571.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:29:31.636Z,1520670571.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:29:32.026Z,1520670572.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:29:32.425Z,1520670572.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:29:32.831Z,1520670572.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:29:33.241Z,1520670573.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:29:33.661Z,1520670573.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:29:34.036Z,1520670574.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:29:34.427Z,1520670574.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:29:34.839Z,1520670574.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:29:35.235Z,1520670575.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:29:35.631Z,1520670575.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:29:36.030Z,1520670576.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:29:36.456Z,1520670576.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:29:36.848Z,1520670576.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:29:37.241Z,1520670577.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:29:37.642Z,1520670577.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:29:38.017Z,1520670578.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:29:38.441Z,1520670578.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:29:38.844Z,1520670578.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:29:39.238Z,1520670579.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:29:39.649Z,1520670579.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:29:40.035Z,1520670580.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:29:40.441Z,1520670580.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:29:40.843Z,1520670580.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:29:41.252Z,1520670581.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:29:41.646Z,1520670581.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:29:42.023Z,1520670582.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:29:42.421Z,1520670582.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:29:42.845Z,1520670582.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:29:43.246Z,1520670583.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:29:43.653Z,1520670583.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:29:44.025Z,1520670584.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:29:44.419Z,1520670584.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:29:44.853Z,1520670584.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:29:45.246Z,1520670585.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:29:45.649Z,1520670585.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:29:46.058Z,1520670586.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:29:46.459Z,1520670586.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:29:46.877Z,1520670586.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:29:47.233Z,1520670587.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:29:47.667Z,1520670587.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:29:48.026Z,1520670588.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:29:48.428Z,1520670588.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:29:48.840Z,1520670588.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:29:49.291Z,1520670589.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:29:49.649Z,1520670589.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:29:50.049Z,1520670590.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:29:50.441Z,1520670590.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:29:50.843Z,1520670590.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:29:51.242Z,1520670591.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:29:51.662Z,1520670591.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:29:52.034Z,1520670592.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:29:52.417Z,1520670592.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:29:52.840Z,1520670592.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:29:53.252Z,1520670593.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:29:53.640Z,1520670593.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:29:54.043Z,1520670594.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:29:54.417Z,1520670594.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:29:54.824Z,1520670594.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:29:55.249Z,1520670595.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:29:55.649Z,1520670595.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:29:56.024Z,1520670596.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:29:56.429Z,1520670596.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:29:56.852Z,1520670596.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:29:57.253Z,1520670597.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:29:57.648Z,1520670597.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:29:58.024Z,1520670598.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:29:58.423Z,1520670598.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:29:58.862Z,1520670598.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:29:59.261Z,1520670599.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:29:59.652Z,1520670599.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:30:00.033Z,1520670600.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:30:00.426Z,1520670600.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:30:00.833Z,1520670600.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:30:01.238Z,1520670601.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:30:01.664Z,1520670601.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:30:02.026Z,1520670602.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:30:02.425Z,1520670602.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:30:02.831Z,1520670602.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:30:03.231Z,1520670603.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:30:03.630Z,1520670603.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:30:04.021Z,1520670604.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:30:04.425Z,1520670604.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:30:04.837Z,1520670604.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:30:05.230Z,1520670605.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:30:05.637Z,1520670605.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:30:06.026Z,1520670606.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:30:06.432Z,1520670606.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:30:06.835Z,1520670606.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:30:07.230Z,1520670607.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:30:07.636Z,1520670607.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:30:08.024Z,1520670608.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:30:08.426Z,1520670608.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:30:08.837Z,1520670608.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:30:09.237Z,1520670609.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:30:09.630Z,1520670609.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:30:10.029Z,1520670610.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:30:10.427Z,1520670610.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:30:10.911Z,1520670610.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:30:11.237Z,1520670611.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:30:11.662Z,1520670611.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:30:12.033Z,1520670612.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:30:12.426Z,1520670612.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:30:12.834Z,1520670612.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:30:13.234Z,1520670613.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:30:13.641Z,1520670613.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:30:14.049Z,1520670614.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:30:14.427Z,1520670614.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:30:14.848Z,1520670614.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:30:15.238Z,1520670615.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:30:15.644Z,1520670615.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:30:16.021Z,1520670616.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:30:16.425Z,1520670616.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:30:16.831Z,1520670616.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:30:17.231Z,1520670617.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:30:17.631Z,1520670617.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:30:18.026Z,1520670618.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:30:18.421Z,1520670618.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:30:18.831Z,1520670618.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:30:19.231Z,1520670619.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:30:19.630Z,1520670619.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:30:20.033Z,1520670620.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:30:20.429Z,1520670620.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:30:20.432Z,1520670620.432 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-03-10T08:25:20.0Z
2018-03-10T08:30:20.432Z,1520670620.432 [Default:CheckIn:Read_GPS] Stopped
2018-03-10T08:30:20.432Z,1520670620.432 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-03-10T08:30:20.832Z,1520670620.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:30:21.375Z,1520670621.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:30:21.631Z,1520670621.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:30:22.034Z,1520670622.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:30:25.267Z,1520670625.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:30:25.425Z,1520670625.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:30:25.706Z,1520670625.706 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20180310T051512/Courier0076.lzma
2018-03-10T08:30:25.766Z,1520670625.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:30:26.172Z,1520670626.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:30:26.504Z,1520670626.504 [DataOverHttps](INFO): Moved sent file to Logs/20180310T051512/Courier0076.lzma.bak
2018-03-10T08:30:26.504Z,1520670626.504 [DataOverHttps](INFO): SBD MOMSN=8003140
2018-03-10T08:30:26.577Z,1520670626.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:30:27.225Z,1520670627.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:30:27.364Z,1520670627.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:30:27.758Z,1520670627.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:30:30.861Z,1520670630.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:30:31.005Z,1520670631.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:30:31.338Z,1520670631.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:30:31.732Z,1520670631.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:30:32.135Z,1520670632.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:30:32.531Z,1520670632.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:30:32.934Z,1520670632.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:30:36.067Z,1520670636.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:30:36.212Z,1520670636.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:30:36.501Z,1520670636.501 [DataOverHttps](INFO): Sending 170 bytes from file Logs/20180310T051512/Express0077.lzma
2018-03-10T08:30:36.560Z,1520670636.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:30:36.939Z,1520670636.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:30:37.289Z,1520670637.289 [DataOverHttps](INFO): Moved sent file to Logs/20180310T051512/Express0077.lzma.bak
2018-03-10T08:30:37.289Z,1520670637.289 [DataOverHttps](INFO): SBD MOMSN=8003142
2018-03-10T08:30:37.367Z,1520670637.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:30:38.029Z,1520670638.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:30:38.032Z,1520670638.032 [Default:CheckIn:Read_Iridium] Stopped
2018-03-10T08:30:38.032Z,1520670638.032 [Default:CheckIn:C.Wait] Running Loop=1
2018-03-10T08:30:38.032Z,1520670638.032 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-03-10T08:30:38.172Z,1520670638.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:30:38.549Z,1520670638.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:30:41.676Z,1520670641.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:30:41.817Z,1520670641.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:30:42.153Z,1520670642.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:30:42.544Z,1520670642.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:30:42.975Z,1520670642.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:30:43.354Z,1520670643.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:30:43.756Z,1520670643.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:30:44.148Z,1520670644.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:30:44.544Z,1520670644.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:30:44.946Z,1520670644.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:30:45.350Z,1520670645.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:30:45.749Z,1520670645.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:30:46.159Z,1520670646.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:30:46.561Z,1520670646.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:30:46.965Z,1520670646.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:30:47.356Z,1520670647.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:30:47.751Z,1520670647.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:30:48.149Z,1520670648.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:30:48.553Z,1520670648.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:30:48.961Z,1520670648.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:30:49.367Z,1520670649.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:30:49.765Z,1520670649.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:30:50.158Z,1520670650.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:30:50.572Z,1520670650.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:30:50.960Z,1520670650.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:30:51.352Z,1520670651.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:30:51.765Z,1520670651.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:30:52.162Z,1520670652.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:30:52.597Z,1520670652.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:30:52.961Z,1520670652.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:30:53.352Z,1520670653.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:30:53.755Z,1520670653.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:30:54.168Z,1520670654.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:30:54.551Z,1520670654.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:30:54.958Z,1520670654.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:30:55.350Z,1520670655.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:30:55.756Z,1520670655.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:30:56.149Z,1520670656.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:30:56.561Z,1520670656.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:30:56.951Z,1520670656.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:30:57.340Z,1520670657.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:30:57.751Z,1520670657.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:30:58.161Z,1520670658.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:30:58.562Z,1520670658.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:30:58.954Z,1520670658.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:30:59.345Z,1520670659.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:30:59.755Z,1520670659.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:31:00.155Z,1520670660.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:31:00.556Z,1520670660.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:31:00.965Z,1520670660.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:31:01.365Z,1520670661.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:31:01.764Z,1520670661.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:31:02.155Z,1520670662.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:31:02.555Z,1520670662.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:31:02.963Z,1520670662.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:31:03.364Z,1520670663.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:31:03.755Z,1520670663.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:31:04.166Z,1520670664.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:31:04.562Z,1520670664.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:31:04.963Z,1520670664.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:31:05.359Z,1520670665.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:31:05.755Z,1520670665.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:31:06.158Z,1520670666.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:31:06.560Z,1520670666.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:31:06.998Z,1520670666.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:31:07.365Z,1520670667.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:31:07.768Z,1520670667.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:31:08.159Z,1520670668.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:31:08.561Z,1520670668.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:31:08.962Z,1520670668.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:31:09.337Z,1520670669.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:31:09.761Z,1520670669.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:31:10.166Z,1520670670.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:31:10.566Z,1520670670.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:31:10.964Z,1520670670.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:31:11.343Z,1520670671.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:31:11.738Z,1520670671.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:31:12.165Z,1520670672.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:31:12.543Z,1520670672.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:31:12.968Z,1520670672.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:31:13.354Z,1520670673.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:31:13.773Z,1520670673.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:31:14.147Z,1520670674.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:31:14.545Z,1520670674.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:31:14.944Z,1520670674.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:31:15.352Z,1520670675.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:31:15.783Z,1520670675.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:31:16.154Z,1520670676.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:31:16.555Z,1520670676.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:31:16.961Z,1520670676.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:31:17.349Z,1520670677.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:31:17.749Z,1520670677.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:31:18.146Z,1520670678.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:31:18.546Z,1520670678.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:31:18.957Z,1520670678.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:31:19.385Z,1520670679.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:31:19.764Z,1520670679.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:31:20.147Z,1520670680.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:31:20.546Z,1520670680.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:31:20.958Z,1520670680.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:31:21.350Z,1520670681.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:31:21.751Z,1520670681.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:31:22.155Z,1520670682.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:31:22.554Z,1520670682.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:31:22.964Z,1520670682.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:31:23.350Z,1520670683.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:31:23.742Z,1520670683.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:31:24.156Z,1520670684.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:31:24.552Z,1520670684.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:31:24.958Z,1520670684.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:31:25.362Z,1520670685.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:31:25.764Z,1520670685.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:31:26.157Z,1520670686.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:31:26.552Z,1520670686.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:31:26.944Z,1520670686.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:31:27.349Z,1520670687.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:31:27.765Z,1520670687.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:31:28.173Z,1520670688.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:31:28.558Z,1520670688.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:31:28.957Z,1520670688.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:31:29.349Z,1520670689.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:31:29.752Z,1520670689.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:31:30.150Z,1520670690.150 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:31:30.150Z,1520670690.150 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 65
2018-03-10T08:31:30.150Z,1520670690.150 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-03-10T08:31:30.152Z,1520670690.152 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:31:30.152Z,1520670690.152 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 65
2018-03-10T08:31:30.152Z,1520670690.152 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-03-10T08:31:30.154Z,1520670690.154 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:31:30.154Z,1520670690.154 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 65
2018-03-10T08:31:30.154Z,1520670690.154 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-10T08:31:30.166Z,1520670690.166 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-03-10T08:31:30.167Z,1520670690.167 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-03-10T08:31:30.167Z,1520670690.167 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-10T08:31:30.567Z,1520670690.567 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-03-10T08:31:30.567Z,1520670690.567 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 65
2018-03-10T08:31:30.567Z,1520670690.567 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-03-10T08:31:30.568Z,1520670690.568 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 65
2018-03-10T08:31:30.568Z,1520670690.568 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-10T08:31:30.568Z,1520670690.568 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 65
2018-03-10T08:31:30.957Z,1520670690.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-03-10T08:31:30.958Z,1520670690.958 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-03-10T08:31:30.958Z,1520670690.958 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-03-10T08:31:30.959Z,1520670690.959 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-03-10T08:31:30.959Z,1520670690.959 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-03-10T08:31:30.960Z,1520670690.960 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-03-10T08:31:30.960Z,1520670690.960 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-10T08:31:30.960Z,1520670690.960 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-10T08:31:30.961Z,1520670690.961 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-10T08:31:31.362Z,1520670691.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-03-10T08:31:31.362Z,1520670691.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:31:31.769Z,1520670691.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-03-10T08:31:31.770Z,1520670691.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:31:32.157Z,1520670692.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-03-10T08:31:32.157Z,1520670692.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:31:32.556Z,1520670692.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-03-10T08:31:32.557Z,1520670692.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:31:32.960Z,1520670692.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-03-10T08:31:32.961Z,1520670692.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:31:33.333Z,1520670693.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-03-10T08:31:33.334Z,1520670693.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:31:33.761Z,1520670693.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-03-10T08:31:33.762Z,1520670693.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:31:34.163Z,1520670694.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-03-10T08:31:34.164Z,1520670694.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:31:34.559Z,1520670694.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-03-10T08:31:34.560Z,1520670694.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:31:34.965Z,1520670694.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-03-10T08:31:34.966Z,1520670694.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:31:35.363Z,1520670695.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-03-10T08:31:35.363Z,1520670695.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:31:35.760Z,1520670695.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-03-10T08:31:35.761Z,1520670695.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:31:36.145Z,1520670696.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-03-10T08:31:36.145Z,1520670696.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:31:36.540Z,1520670696.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-03-10T08:31:36.541Z,1520670696.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:31:36.947Z,1520670696.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-03-10T08:31:36.948Z,1520670696.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:31:37.372Z,1520670697.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-03-10T08:31:37.373Z,1520670697.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:31:37.754Z,1520670697.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-03-10T08:31:37.771Z,1520670697.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:31:38.148Z,1520670698.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-03-10T08:31:38.149Z,1520670698.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:31:38.545Z,1520670698.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-03-10T08:31:38.546Z,1520670698.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:31:41.653Z,1520670701.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.5 s old, using for 20.0 s.
2018-03-10T08:31:41.654Z,1520670701.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:31:41.800Z,1520670701.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.7 s old, using for 20.0 s.
2018-03-10T08:31:41.801Z,1520670701.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:31:42.200Z,1520670702.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.1 s old, using for 20.0 s.
2018-03-10T08:31:42.201Z,1520670702.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:31:42.589Z,1520670702.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-03-10T08:31:42.590Z,1520670702.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:31:42.986Z,1520670702.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-03-10T08:31:42.986Z,1520670702.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:31:43.384Z,1520670703.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-03-10T08:31:43.385Z,1520670703.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:31:43.760Z,1520670703.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-03-10T08:31:43.761Z,1520670703.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:31:44.157Z,1520670704.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-03-10T08:31:44.158Z,1520670704.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:31:44.584Z,1520670704.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-03-10T08:31:44.585Z,1520670704.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:31:44.988Z,1520670704.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-03-10T08:31:44.989Z,1520670704.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:31:45.370Z,1520670705.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-03-10T08:31:45.387Z,1520670705.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:31:45.793Z,1520670705.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-03-10T08:31:45.794Z,1520670705.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:31:46.163Z,1520670706.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-03-10T08:31:46.164Z,1520670706.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:31:46.564Z,1520670706.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-03-10T08:31:46.565Z,1520670706.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:31:46.965Z,1520670706.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-03-10T08:31:46.966Z,1520670706.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:31:47.365Z,1520670707.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-03-10T08:31:47.366Z,1520670707.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:31:47.763Z,1520670707.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-03-10T08:31:47.764Z,1520670707.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:31:48.170Z,1520670708.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-03-10T08:31:48.171Z,1520670708.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:31:48.593Z,1520670708.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2018-03-10T08:31:48.594Z,1520670708.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:31:48.972Z,1520670708.972 [BPC1](ERROR): Failed to receive battery data
2018-03-10T08:31:48.972Z,1520670708.972 [BPC1] Communications Fault, FailCount= 1
2018-03-10T08:31:48.972Z,1520670708.972 [BPC1](ERROR): Communications Fault
2018-03-10T08:31:49.001Z,1520670709.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.9 s old, using for 20.0 s.
2018-03-10T08:31:49.002Z,1520670709.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:31:49.015Z,1520670709.015 [CBIT](ERROR): Communications Fault in component: BPC1
2018-03-10T08:31:49.361Z,1520670709.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2018-03-10T08:31:49.362Z,1520670709.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:31:49.764Z,1520670709.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2018-03-10T08:31:49.765Z,1520670709.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:31:50.169Z,1520670710.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:31:50.202Z,1520670710.202 [CBIT](INFO): Clearing failed state for component BPC1
2018-03-10T08:31:50.202Z,1520670710.202 [BPC1] No Fault, FailCount= 1
2018-03-10T08:31:50.617Z,1520670710.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:31:50.976Z,1520670710.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:31:51.366Z,1520670711.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:31:51.778Z,1520670711.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:31:52.164Z,1520670712.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:31:52.569Z,1520670712.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:31:52.965Z,1520670712.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:31:53.372Z,1520670713.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:31:53.769Z,1520670713.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:31:54.170Z,1520670714.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:31:54.597Z,1520670714.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:31:54.966Z,1520670714.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:31:55.365Z,1520670715.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:31:55.766Z,1520670715.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:31:56.166Z,1520670716.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:31:56.563Z,1520670716.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:31:56.999Z,1520670716.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:31:57.373Z,1520670717.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:31:57.795Z,1520670717.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:31:58.166Z,1520670718.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:31:58.573Z,1520670718.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:31:58.965Z,1520670718.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:31:59.366Z,1520670719.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:31:59.765Z,1520670719.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:32:00.170Z,1520670720.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:32:00.575Z,1520670720.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:32:00.971Z,1520670720.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:32:01.364Z,1520670721.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:32:01.776Z,1520670721.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:32:02.173Z,1520670722.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:32:02.567Z,1520670722.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:32:02.977Z,1520670722.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:32:03.374Z,1520670723.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:32:03.771Z,1520670723.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:32:04.166Z,1520670724.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:32:04.567Z,1520670724.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:32:04.969Z,1520670724.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:32:05.370Z,1520670725.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:32:05.769Z,1520670725.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:32:06.171Z,1520670726.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:32:06.571Z,1520670726.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:32:06.976Z,1520670726.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:32:07.366Z,1520670727.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:32:07.771Z,1520670727.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:32:08.175Z,1520670728.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:32:08.577Z,1520670728.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:32:08.979Z,1520670728.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:32:09.385Z,1520670729.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:32:09.779Z,1520670729.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:32:10.177Z,1520670730.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:32:10.570Z,1520670730.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:32:10.966Z,1520670730.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:32:11.379Z,1520670731.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:32:11.769Z,1520670731.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:32:12.181Z,1520670732.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:32:12.579Z,1520670732.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:32:12.971Z,1520670732.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:32:13.368Z,1520670733.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:32:13.762Z,1520670733.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:32:14.168Z,1520670734.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:32:14.569Z,1520670734.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:32:14.979Z,1520670734.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:32:15.377Z,1520670735.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:32:15.785Z,1520670735.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:32:16.168Z,1520670736.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:32:16.568Z,1520670736.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:32:16.968Z,1520670736.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:32:17.369Z,1520670737.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:32:17.773Z,1520670737.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:32:18.174Z,1520670738.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:32:18.581Z,1520670738.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:32:18.978Z,1520670738.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:32:19.377Z,1520670739.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:32:19.770Z,1520670739.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:32:20.171Z,1520670740.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:32:20.571Z,1520670740.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:32:20.969Z,1520670740.969 [BPC1](FAULT): Failed to initialize
2018-03-10T08:32:20.970Z,1520670740.970 [BPC1] Communications Fault, FailCount= 2
2018-03-10T08:32:20.970Z,1520670740.970 [BPC1](ERROR): Communications Fault
2018-03-10T08:32:20.977Z,1520670740.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:32:20.989Z,1520670740.989 [CBIT](ERROR): Communications Fault in component: BPC1
2018-03-10T08:32:21.378Z,1520670741.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:32:21.774Z,1520670741.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:32:22.177Z,1520670742.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:32:22.189Z,1520670742.189 [CBIT](INFO): Clearing failed state for component BPC1
2018-03-10T08:32:22.189Z,1520670742.189 [BPC1] No Fault, FailCount= 2
2018-03-10T08:32:22.617Z,1520670742.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:32:22.975Z,1520670742.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:32:23.377Z,1520670743.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:32:23.775Z,1520670743.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:32:24.181Z,1520670744.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:32:24.579Z,1520670744.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:32:24.978Z,1520670744.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:32:25.375Z,1520670745.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:32:25.776Z,1520670745.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:32:26.176Z,1520670746.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:32:26.575Z,1520670746.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:32:26.980Z,1520670746.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:32:27.382Z,1520670747.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:32:27.783Z,1520670747.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:32:28.180Z,1520670748.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:32:28.575Z,1520670748.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:32:28.977Z,1520670748.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:32:29.379Z,1520670749.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:32:29.775Z,1520670749.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:32:30.181Z,1520670750.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:32:30.581Z,1520670750.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:32:30.980Z,1520670750.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:32:31.375Z,1520670751.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:32:31.776Z,1520670751.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:32:32.175Z,1520670752.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:32:32.575Z,1520670752.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:32:32.981Z,1520670752.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:32:33.382Z,1520670753.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:32:33.779Z,1520670753.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:32:34.179Z,1520670754.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:32:34.580Z,1520670754.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:32:34.975Z,1520670754.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:32:35.379Z,1520670755.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:32:35.775Z,1520670755.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:32:36.179Z,1520670756.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:32:36.577Z,1520670756.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:32:36.978Z,1520670756.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:32:37.375Z,1520670757.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:32:37.780Z,1520670757.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:32:38.175Z,1520670758.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:32:38.574Z,1520670758.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:32:41.672Z,1520670761.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:32:41.818Z,1520670761.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:32:42.154Z,1520670762.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:32:42.545Z,1520670762.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:32:42.953Z,1520670762.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:32:43.346Z,1520670763.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:32:43.742Z,1520670763.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:32:44.146Z,1520670764.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:32:44.550Z,1520670764.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:32:44.946Z,1520670764.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:32:45.338Z,1520670765.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:32:45.748Z,1520670765.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:32:46.146Z,1520670766.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:32:46.545Z,1520670766.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:32:46.948Z,1520670766.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:32:47.352Z,1520670767.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:32:47.750Z,1520670767.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:32:48.144Z,1520670768.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:32:48.543Z,1520670768.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:32:48.936Z,1520670768.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:32:49.344Z,1520670769.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:32:49.744Z,1520670769.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:32:50.150Z,1520670770.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:32:50.550Z,1520670770.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:32:50.950Z,1520670770.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:32:51.338Z,1520670771.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:32:51.742Z,1520670771.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:32:52.146Z,1520670772.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:32:52.536Z,1520670772.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:32:52.943Z,1520670772.943 [BPC1](FAULT): Failed to initialize
2018-03-10T08:32:52.943Z,1520670772.943 [BPC1] Communications Fault, FailCount= 3
2018-03-10T08:32:52.943Z,1520670772.943 [BPC1](ERROR): Communications Fault
2018-03-10T08:32:52.957Z,1520670772.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:32:53.003Z,1520670773.003 [CBIT](ERROR): Communications Fault in component: BPC1
2018-03-10T08:32:53.349Z,1520670773.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:32:53.745Z,1520670773.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:32:54.140Z,1520670774.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:32:54.152Z,1520670774.152 [CBIT](INFO): Clearing failed state for component BPC1
2018-03-10T08:32:54.152Z,1520670774.152 [BPC1] No Fault, FailCount= 3
2018-03-10T08:32:54.589Z,1520670774.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:32:54.949Z,1520670774.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:32:55.344Z,1520670775.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:32:55.744Z,1520670775.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:32:56.149Z,1520670776.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:32:56.550Z,1520670776.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:32:56.950Z,1520670776.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:32:57.375Z,1520670777.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:32:57.741Z,1520670777.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:32:58.141Z,1520670778.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:32:58.538Z,1520670778.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:32:58.950Z,1520670778.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:32:59.349Z,1520670779.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:32:59.749Z,1520670779.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:33:00.149Z,1520670780.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:33:00.545Z,1520670780.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:33:00.936Z,1520670780.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:33:01.339Z,1520670781.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:33:01.741Z,1520670781.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:33:02.149Z,1520670782.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:33:02.549Z,1520670782.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:33:02.949Z,1520670782.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:33:03.338Z,1520670783.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:33:03.742Z,1520670783.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:33:04.141Z,1520670784.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:33:04.538Z,1520670784.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:33:04.949Z,1520670784.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:33:05.350Z,1520670785.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:33:05.750Z,1520670785.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:33:06.149Z,1520670786.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:33:06.545Z,1520670786.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:33:06.936Z,1520670786.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:33:07.342Z,1520670787.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:33:07.740Z,1520670787.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:33:08.146Z,1520670788.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:33:08.557Z,1520670788.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:33:08.949Z,1520670788.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:33:09.337Z,1520670789.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:33:09.744Z,1520670789.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:33:10.145Z,1520670790.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:33:10.543Z,1520670790.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:33:10.953Z,1520670790.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:33:11.353Z,1520670791.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:33:11.755Z,1520670791.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:33:12.147Z,1520670792.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:33:12.538Z,1520670792.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:33:12.938Z,1520670792.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:33:13.349Z,1520670793.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:33:13.745Z,1520670793.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:33:14.155Z,1520670794.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:33:14.554Z,1520670794.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:33:14.954Z,1520670794.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:33:15.341Z,1520670795.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:33:15.756Z,1520670795.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:33:16.154Z,1520670796.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:33:16.543Z,1520670796.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:33:16.960Z,1520670796.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:33:17.355Z,1520670797.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:33:17.754Z,1520670797.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:33:18.152Z,1520670798.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:33:18.553Z,1520670798.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:33:18.939Z,1520670798.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:33:19.353Z,1520670799.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:33:19.753Z,1520670799.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:33:20.158Z,1520670800.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:33:20.560Z,1520670800.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:33:20.964Z,1520670800.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:33:21.347Z,1520670801.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:33:21.756Z,1520670801.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:33:22.133Z,1520670802.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:33:22.531Z,1520670802.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:33:22.965Z,1520670802.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:33:23.361Z,1520670803.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:33:23.739Z,1520670803.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:33:24.140Z,1520670804.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:33:24.540Z,1520670804.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:33:24.923Z,1520670804.923 [BPC1](FAULT): Failed to initialize
2018-03-10T08:33:24.923Z,1520670804.923 [BPC1] Communications Fault, FailCount= 4
2018-03-10T08:33:24.923Z,1520670804.923 [BPC1](ERROR): Communications Fault
2018-03-10T08:33:24.930Z,1520670804.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:33:24.968Z,1520670804.968 [CBIT](ERROR): Communications Fault in component: BPC1
2018-03-10T08:33:25.346Z,1520670805.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:33:25.737Z,1520670805.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:33:26.139Z,1520670806.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:33:26.160Z,1520670806.160 [CBIT](INFO): Clearing failed state for component BPC1
2018-03-10T08:33:26.160Z,1520670806.160 [BPC1] No Fault, FailCount= 4
2018-03-10T08:33:26.617Z,1520670806.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:33:26.967Z,1520670806.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:33:27.337Z,1520670807.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:33:27.742Z,1520670807.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:33:28.141Z,1520670808.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:33:28.540Z,1520670808.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:33:28.950Z,1520670808.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:33:29.353Z,1520670809.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:33:29.742Z,1520670809.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:33:30.145Z,1520670810.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:33:30.541Z,1520670810.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:33:30.938Z,1520670810.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:33:31.341Z,1520670811.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:33:31.740Z,1520670811.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:33:32.154Z,1520670812.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:33:32.550Z,1520670812.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:33:32.952Z,1520670812.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:33:33.335Z,1520670813.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:33:33.740Z,1520670813.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:33:34.141Z,1520670814.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:33:34.539Z,1520670814.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:33:34.949Z,1520670814.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:33:35.350Z,1520670815.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:33:35.747Z,1520670815.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:33:36.140Z,1520670816.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:33:36.540Z,1520670816.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:33:36.937Z,1520670816.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:33:37.345Z,1520670817.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:33:37.740Z,1520670817.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:33:38.149Z,1520670818.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:33:38.550Z,1520670818.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:33:38.956Z,1520670818.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:33:42.037Z,1520670822.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:33:42.177Z,1520670822.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:33:42.529Z,1520670822.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:33:42.932Z,1520670822.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:33:43.330Z,1520670823.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:33:43.729Z,1520670823.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:33:44.109Z,1520670824.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:33:44.501Z,1520670824.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:33:44.934Z,1520670824.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:33:45.332Z,1520670825.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:33:45.745Z,1520670825.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:33:46.133Z,1520670826.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:33:46.514Z,1520670826.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:33:46.903Z,1520670826.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:33:47.345Z,1520670827.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:33:47.713Z,1520670827.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:33:48.117Z,1520670828.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:33:48.524Z,1520670828.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:33:48.928Z,1520670828.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:33:49.315Z,1520670829.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:33:49.721Z,1520670829.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:33:50.119Z,1520670830.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:33:50.534Z,1520670830.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:33:50.930Z,1520670830.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:33:51.273Z,1520670831.273 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-03-10T08:33:51.273Z,1520670831.273 [NAL9602] Data Fault, FailCount= 4
2018-03-10T08:33:51.274Z,1520670831.274 [NAL9602](ERROR): Data Fault
2018-03-10T08:33:51.305Z,1520670831.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:33:51.318Z,1520670831.318 [CBIT](ERROR): Data Fault in component: NAL9602
2018-03-10T08:33:51.664Z,1520670831.664 [NAL9602](INFO): Powering down
2018-03-10T08:33:51.719Z,1520670831.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:33:52.117Z,1520670832.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:33:52.517Z,1520670832.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:33:52.549Z,1520670832.549 [CBIT](INFO): Clearing failed state for component NAL9602
2018-03-10T08:33:52.549Z,1520670832.549 [NAL9602] No Fault, FailCount= 4
2018-03-10T08:33:52.925Z,1520670832.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:33:53.317Z,1520670833.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:33:53.712Z,1520670833.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:33:54.112Z,1520670834.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:33:54.508Z,1520670834.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:33:54.912Z,1520670834.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:33:55.319Z,1520670835.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:33:55.724Z,1520670835.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:33:56.100Z,1520670836.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:33:56.504Z,1520670836.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:33:56.909Z,1520670836.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:33:57.307Z,1520670837.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:33:57.706Z,1520670837.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:33:58.109Z,1520670838.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:33:58.508Z,1520670838.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:33:58.941Z,1520670838.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:33:59.333Z,1520670839.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:33:59.712Z,1520670839.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:34:00.140Z,1520670840.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:34:00.510Z,1520670840.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:34:00.909Z,1520670840.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:34:01.309Z,1520670841.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:34:01.709Z,1520670841.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:34:02.110Z,1520670842.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:34:02.511Z,1520670842.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:34:02.910Z,1520670842.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:34:03.304Z,1520670843.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:34:03.709Z,1520670843.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:34:04.137Z,1520670844.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:34:04.507Z,1520670844.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:34:04.911Z,1520670844.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:34:05.311Z,1520670845.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:34:05.716Z,1520670845.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:34:06.109Z,1520670846.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:34:06.512Z,1520670846.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:34:06.911Z,1520670846.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:34:07.311Z,1520670847.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:34:07.707Z,1520670847.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:34:08.108Z,1520670848.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:34:08.507Z,1520670848.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:34:08.912Z,1520670848.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:34:09.311Z,1520670849.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:34:09.712Z,1520670849.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:34:10.117Z,1520670850.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:34:10.511Z,1520670850.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:34:10.912Z,1520670850.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:34:11.316Z,1520670851.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:34:11.709Z,1520670851.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:34:12.112Z,1520670852.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:34:12.524Z,1520670852.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:34:12.909Z,1520670852.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:34:13.311Z,1520670853.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:34:13.716Z,1520670853.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:34:14.116Z,1520670854.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:34:14.510Z,1520670854.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:34:14.912Z,1520670854.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:34:15.316Z,1520670855.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:34:15.725Z,1520670855.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:34:16.116Z,1520670856.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:34:16.509Z,1520670856.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:34:16.912Z,1520670856.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:34:17.310Z,1520670857.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:34:17.716Z,1520670857.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:34:18.105Z,1520670858.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:34:18.511Z,1520670858.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:34:18.917Z,1520670858.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:34:19.311Z,1520670859.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:34:19.708Z,1520670859.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:34:20.109Z,1520670860.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:34:20.517Z,1520670860.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:34:20.916Z,1520670860.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:34:21.317Z,1520670861.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:34:21.668Z,1520670861.668 [NAL9602](INFO): Powering up NAL9602
2018-03-10T08:34:21.715Z,1520670861.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:34:22.115Z,1520670862.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:34:22.510Z,1520670862.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:34:22.910Z,1520670862.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:34:23.316Z,1520670863.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:34:23.717Z,1520670863.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:34:24.112Z,1520670864.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:34:24.508Z,1520670864.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:34:24.918Z,1520670864.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:34:25.329Z,1520670865.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:34:25.716Z,1520670865.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:34:26.112Z,1520670866.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:34:26.517Z,1520670866.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:34:26.917Z,1520670866.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:34:27.314Z,1520670867.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:34:27.705Z,1520670867.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:34:28.113Z,1520670868.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:34:28.517Z,1520670868.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:34:28.912Z,1520670868.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:34:29.310Z,1520670869.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:34:29.714Z,1520670869.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:34:30.116Z,1520670870.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:34:30.516Z,1520670870.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:34:30.921Z,1520670870.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:34:31.311Z,1520670871.311 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:34:31.311Z,1520670871.311 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 66
2018-03-10T08:34:31.311Z,1520670871.311 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-03-10T08:34:31.313Z,1520670871.313 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:34:31.313Z,1520670871.313 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 66
2018-03-10T08:34:31.313Z,1520670871.313 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-03-10T08:34:31.315Z,1520670871.315 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:34:31.315Z,1520670871.315 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 66
2018-03-10T08:34:31.315Z,1520670871.315 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-10T08:34:31.327Z,1520670871.327 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-03-10T08:34:31.327Z,1520670871.327 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-03-10T08:34:31.328Z,1520670871.328 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-10T08:34:31.727Z,1520670871.727 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-03-10T08:34:31.727Z,1520670871.727 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 66
2018-03-10T08:34:31.727Z,1520670871.727 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-03-10T08:34:31.727Z,1520670871.727 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 66
2018-03-10T08:34:31.728Z,1520670871.728 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-10T08:34:31.728Z,1520670871.728 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 66
2018-03-10T08:34:32.119Z,1520670872.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-03-10T08:34:32.119Z,1520670872.119 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-03-10T08:34:32.120Z,1520670872.120 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-03-10T08:34:32.120Z,1520670872.120 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-03-10T08:34:32.121Z,1520670872.121 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-03-10T08:34:32.121Z,1520670872.121 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-03-10T08:34:32.121Z,1520670872.121 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-10T08:34:32.122Z,1520670872.122 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-10T08:34:32.122Z,1520670872.122 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-10T08:34:32.525Z,1520670872.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-03-10T08:34:32.525Z,1520670872.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:34:32.885Z,1520670872.885 [NAL9602](INFO): NAL9602 initialized
2018-03-10T08:34:32.927Z,1520670872.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-03-10T08:34:32.928Z,1520670872.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:34:33.322Z,1520670873.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-03-10T08:34:33.323Z,1520670873.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:34:33.715Z,1520670873.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-03-10T08:34:33.716Z,1520670873.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:34:34.138Z,1520670874.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-03-10T08:34:34.138Z,1520670874.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:34:34.512Z,1520670874.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-03-10T08:34:34.512Z,1520670874.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:34:34.910Z,1520670874.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-03-10T08:34:34.911Z,1520670874.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:34:35.336Z,1520670875.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-03-10T08:34:35.337Z,1520670875.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:34:35.716Z,1520670875.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-03-10T08:34:35.716Z,1520670875.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:34:36.139Z,1520670876.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-03-10T08:34:36.140Z,1520670876.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:34:36.516Z,1520670876.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-03-10T08:34:36.517Z,1520670876.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:34:36.914Z,1520670876.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-03-10T08:34:36.920Z,1520670876.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:34:37.324Z,1520670877.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-03-10T08:34:37.325Z,1520670877.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:34:37.764Z,1520670877.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.5 s old, using for 20.0 s.
2018-03-10T08:34:37.765Z,1520670877.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:34:38.152Z,1520670878.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-03-10T08:34:38.153Z,1520670878.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:34:38.506Z,1520670878.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-03-10T08:34:38.507Z,1520670878.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:34:38.915Z,1520670878.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-03-10T08:34:38.916Z,1520670878.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:34:39.326Z,1520670879.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-03-10T08:34:39.327Z,1520670879.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:34:42.417Z,1520670882.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.1 s old, using for 20.0 s.
2018-03-10T08:34:42.418Z,1520670882.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:34:42.572Z,1520670882.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.3 s old, using for 20.0 s.
2018-03-10T08:34:42.573Z,1520670882.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:34:42.907Z,1520670882.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-03-10T08:34:42.908Z,1520670882.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:34:43.279Z,1520670883.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-03-10T08:34:43.280Z,1520670883.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:34:43.705Z,1520670883.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-03-10T08:34:43.706Z,1520670883.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:34:44.104Z,1520670884.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-03-10T08:34:44.105Z,1520670884.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:34:44.512Z,1520670884.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-03-10T08:34:44.513Z,1520670884.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:34:44.905Z,1520670884.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-03-10T08:34:44.906Z,1520670884.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:34:45.306Z,1520670885.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-03-10T08:34:45.307Z,1520670885.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:34:45.708Z,1520670885.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-03-10T08:34:45.709Z,1520670885.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:34:46.108Z,1520670886.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-03-10T08:34:46.109Z,1520670886.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:34:46.488Z,1520670886.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-03-10T08:34:46.489Z,1520670886.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:34:46.892Z,1520670886.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-03-10T08:34:46.893Z,1520670886.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:34:47.312Z,1520670887.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-03-10T08:34:47.313Z,1520670887.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:34:47.709Z,1520670887.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-03-10T08:34:47.710Z,1520670887.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:34:48.112Z,1520670888.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-03-10T08:34:48.113Z,1520670888.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:34:48.512Z,1520670888.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-03-10T08:34:48.513Z,1520670888.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:34:48.919Z,1520670888.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-03-10T08:34:48.920Z,1520670888.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:34:49.318Z,1520670889.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-03-10T08:34:49.319Z,1520670889.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:34:49.728Z,1520670889.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2018-03-10T08:34:49.729Z,1520670889.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:34:50.097Z,1520670890.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2018-03-10T08:34:50.098Z,1520670890.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:34:50.496Z,1520670890.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2018-03-10T08:34:50.497Z,1520670890.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:34:50.892Z,1520670890.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2018-03-10T08:34:50.893Z,1520670890.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:34:51.305Z,1520670891.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 20.0 s old, using for 20.0 s.
2018-03-10T08:34:51.305Z,1520670891.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:34:51.698Z,1520670891.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:34:52.097Z,1520670892.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:34:52.493Z,1520670892.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:34:52.888Z,1520670892.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:34:53.298Z,1520670893.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:34:53.698Z,1520670893.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:34:54.105Z,1520670894.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:34:54.487Z,1520670894.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:34:54.893Z,1520670894.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:34:55.305Z,1520670895.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:34:55.698Z,1520670895.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:34:56.105Z,1520670896.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:34:56.493Z,1520670896.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:34:56.888Z,1520670896.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:34:57.298Z,1520670897.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:34:57.698Z,1520670897.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:34:58.097Z,1520670898.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:34:58.493Z,1520670898.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:34:58.889Z,1520670898.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:34:59.306Z,1520670899.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:34:59.698Z,1520670899.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:35:00.105Z,1520670900.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:35:00.493Z,1520670900.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:35:00.897Z,1520670900.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:35:01.299Z,1520670901.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:35:01.705Z,1520670901.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:35:02.132Z,1520670902.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:35:02.494Z,1520670902.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:35:02.892Z,1520670902.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:35:03.298Z,1520670903.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:35:03.702Z,1520670903.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:35:04.095Z,1520670904.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:35:04.497Z,1520670904.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:35:04.894Z,1520670904.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:35:05.294Z,1520670905.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:35:05.702Z,1520670905.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:35:06.109Z,1520670906.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:35:06.497Z,1520670906.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:35:06.889Z,1520670906.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:35:07.303Z,1520670907.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:35:07.702Z,1520670907.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:35:08.102Z,1520670908.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:35:08.495Z,1520670908.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:35:08.892Z,1520670908.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:35:09.308Z,1520670909.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:35:09.709Z,1520670909.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:35:10.102Z,1520670910.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:35:10.497Z,1520670910.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:35:10.893Z,1520670910.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:35:11.305Z,1520670911.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:35:11.709Z,1520670911.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:35:12.104Z,1520670912.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:35:12.496Z,1520670912.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:35:12.909Z,1520670912.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:35:13.303Z,1520670913.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:35:13.704Z,1520670913.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:35:14.109Z,1520670914.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:35:14.516Z,1520670914.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:35:14.893Z,1520670914.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:35:15.299Z,1520670915.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:35:15.701Z,1520670915.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:35:16.103Z,1520670916.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:35:16.497Z,1520670916.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:35:16.886Z,1520670916.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:35:17.296Z,1520670917.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:35:17.702Z,1520670917.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:35:18.102Z,1520670918.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:35:18.501Z,1520670918.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:35:18.893Z,1520670918.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:35:19.303Z,1520670919.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:35:19.709Z,1520670919.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:35:20.103Z,1520670920.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:35:20.492Z,1520670920.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:35:20.885Z,1520670920.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:35:21.307Z,1520670921.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:35:21.709Z,1520670921.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:35:22.109Z,1520670922.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:35:22.489Z,1520670922.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:35:22.897Z,1520670922.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:35:23.304Z,1520670923.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:35:23.702Z,1520670923.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:35:24.109Z,1520670924.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:35:24.517Z,1520670924.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:35:24.893Z,1520670924.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:35:25.305Z,1520670925.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:35:25.706Z,1520670925.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:35:26.100Z,1520670926.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:35:26.497Z,1520670926.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:35:26.895Z,1520670926.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:35:27.308Z,1520670927.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:35:27.720Z,1520670927.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:35:27.756Z,1520670927.756 [CBIT](DEBUG): EFC running - data check-sum false
2018-03-10T08:35:28.103Z,1520670928.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:35:28.497Z,1520670928.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:35:28.900Z,1520670928.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:35:29.302Z,1520670929.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:35:29.703Z,1520670929.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:35:30.101Z,1520670930.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:35:30.499Z,1520670930.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:35:30.914Z,1520670930.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:35:31.307Z,1520670931.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:35:31.709Z,1520670931.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:35:32.109Z,1520670932.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:35:32.509Z,1520670932.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:35:32.905Z,1520670932.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:35:33.307Z,1520670933.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:35:33.711Z,1520670933.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:35:34.110Z,1520670934.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:35:34.489Z,1520670934.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:35:34.880Z,1520670934.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:35:35.314Z,1520670935.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:35:35.728Z,1520670935.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:35:36.124Z,1520670936.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:35:36.493Z,1520670936.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:35:36.888Z,1520670936.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:35:37.300Z,1520670937.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:35:37.700Z,1520670937.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:35:38.095Z,1520670938.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:35:38.491Z,1520670938.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:35:38.494Z,1520670938.494 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-03-10T08:35:38.494Z,1520670938.494 [Default:CheckIn:C.Wait] Stopped
2018-03-10T08:35:38.494Z,1520670938.494 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-03-10T08:35:38.494Z,1520670938.494 [Default:CheckIn:D] Running Loop=1
2018-03-10T08:35:38.888Z,1520670938.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:35:38.891Z,1520670938.891 [Default:CheckIn:D] Stopped
2018-03-10T08:35:38.891Z,1520670938.891 [Default:CheckIn:E] Running Loop=1
2018-03-10T08:35:39.311Z,1520670939.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:35:39.318Z,1520670939.318 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 196.349512 min 
2018-03-10T08:35:39.318Z,1520670939.318 [Default:CheckIn:E] Stopped
2018-03-10T08:35:39.318Z,1520670939.318 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-03-10T08:35:39.318Z,1520670939.318 [Default:CheckIn] Stopped
2018-03-10T08:35:39.318Z,1520670939.318 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-03-10T08:35:39.318Z,1520670939.318 [Default:CheckIn](INFO): Running loop #20
2018-03-10T08:35:39.323Z,1520670939.323 [Default:CheckIn] Running Loop=20
2018-03-10T08:35:39.323Z,1520670939.323 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-03-10T08:35:39.323Z,1520670939.323 [Default:CheckIn:Read_GPS] Running Loop=1
2018-03-10T08:35:39.709Z,1520670939.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:35:42.830Z,1520670942.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:35:42.976Z,1520670942.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:35:43.309Z,1520670943.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:35:43.703Z,1520670943.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:35:44.105Z,1520670944.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:35:44.578Z,1520670944.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:35:44.932Z,1520670944.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:35:45.313Z,1520670945.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:35:45.710Z,1520670945.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:35:46.147Z,1520670946.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:35:46.518Z,1520670946.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:35:46.906Z,1520670946.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:35:47.322Z,1520670947.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:35:47.780Z,1520670947.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:35:48.126Z,1520670948.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:35:48.534Z,1520670948.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:35:48.905Z,1520670948.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:35:49.332Z,1520670949.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:35:49.708Z,1520670949.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:35:50.134Z,1520670950.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:35:50.501Z,1520670950.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:35:50.946Z,1520670950.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:35:51.332Z,1520670951.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:35:51.733Z,1520670951.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:35:52.131Z,1520670952.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:35:52.504Z,1520670952.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:35:52.896Z,1520670952.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:35:53.308Z,1520670953.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:35:53.710Z,1520670953.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:35:54.112Z,1520670954.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:35:54.509Z,1520670954.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:35:54.909Z,1520670954.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:35:55.317Z,1520670955.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:35:55.737Z,1520670955.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:35:56.110Z,1520670956.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:35:56.505Z,1520670956.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:35:56.898Z,1520670956.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:35:57.309Z,1520670957.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:35:57.709Z,1520670957.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:35:58.110Z,1520670958.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:35:58.505Z,1520670958.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:35:58.910Z,1520670958.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:35:59.336Z,1520670959.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:35:59.713Z,1520670959.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:36:00.113Z,1520670960.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:36:00.505Z,1520670960.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:36:00.901Z,1520670960.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:36:01.314Z,1520670961.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:36:01.715Z,1520670961.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:36:02.114Z,1520670962.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:36:02.505Z,1520670962.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:36:02.905Z,1520670962.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:36:03.315Z,1520670963.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:36:03.724Z,1520670963.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:36:04.115Z,1520670964.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:36:04.509Z,1520670964.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:36:04.908Z,1520670964.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:36:05.314Z,1520670965.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:36:05.715Z,1520670965.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:36:06.113Z,1520670966.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:36:06.507Z,1520670966.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:36:06.909Z,1520670966.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:36:07.322Z,1520670967.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:36:07.732Z,1520670967.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:36:08.114Z,1520670968.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:36:08.508Z,1520670968.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:36:08.890Z,1520670968.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:36:09.317Z,1520670969.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:36:09.724Z,1520670969.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:36:10.126Z,1520670970.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:36:10.520Z,1520670970.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:36:10.897Z,1520670970.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:36:11.316Z,1520670971.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:36:11.729Z,1520670971.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:36:12.120Z,1520670972.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:36:12.498Z,1520670972.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:36:12.921Z,1520670972.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:36:13.336Z,1520670973.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:36:13.733Z,1520670973.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:36:14.126Z,1520670974.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:36:14.505Z,1520670974.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:36:14.900Z,1520670974.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:36:15.326Z,1520670975.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:36:15.725Z,1520670975.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:36:16.126Z,1520670976.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:36:16.497Z,1520670976.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:36:16.899Z,1520670976.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:36:17.325Z,1520670977.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:36:17.724Z,1520670977.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:36:18.126Z,1520670978.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:36:18.505Z,1520670978.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:36:18.896Z,1520670978.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:36:19.327Z,1520670979.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:36:19.706Z,1520670979.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:36:20.126Z,1520670980.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:36:20.498Z,1520670980.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:36:20.905Z,1520670980.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:36:21.326Z,1520670981.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:36:21.725Z,1520670981.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:36:22.137Z,1520670982.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:36:22.528Z,1520670982.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:36:22.901Z,1520670982.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:36:23.307Z,1520670983.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:36:23.728Z,1520670983.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:36:24.128Z,1520670984.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:36:24.509Z,1520670984.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:36:24.928Z,1520670984.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:36:25.307Z,1520670985.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:36:25.777Z,1520670985.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:36:26.103Z,1520670986.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:36:26.502Z,1520670986.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:36:26.900Z,1520670986.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:36:27.331Z,1520670987.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:36:27.709Z,1520670987.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:36:28.108Z,1520670988.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:36:28.558Z,1520670988.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:36:28.904Z,1520670988.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:36:29.308Z,1520670989.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:36:29.721Z,1520670989.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:36:30.116Z,1520670990.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:36:30.506Z,1520670990.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:36:30.910Z,1520670990.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:36:31.316Z,1520670991.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:36:31.718Z,1520670991.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:36:32.111Z,1520670992.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:36:32.505Z,1520670992.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:36:32.909Z,1520670992.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:36:33.314Z,1520670993.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:36:33.720Z,1520670993.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:36:34.114Z,1520670994.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:36:34.523Z,1520670994.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:36:34.917Z,1520670994.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:36:35.315Z,1520670995.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:36:35.721Z,1520670995.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:36:36.117Z,1520670996.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:36:36.509Z,1520670996.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:36:36.901Z,1520670996.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:36:37.324Z,1520670997.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:36:37.717Z,1520670997.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:36:38.120Z,1520670998.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:36:38.512Z,1520670998.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:36:38.909Z,1520670998.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:36:39.321Z,1520670999.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:36:39.717Z,1520670999.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:36:42.825Z,1520671002.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:36:42.964Z,1520671002.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:36:43.315Z,1520671003.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:36:43.688Z,1520671003.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:36:44.113Z,1520671004.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:36:44.514Z,1520671004.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:36:44.925Z,1520671004.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:36:45.311Z,1520671005.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:36:45.713Z,1520671005.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:36:46.088Z,1520671006.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:36:46.513Z,1520671006.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:36:46.893Z,1520671006.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:36:47.326Z,1520671007.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:36:47.733Z,1520671007.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:36:48.115Z,1520671008.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:36:48.493Z,1520671008.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:36:48.893Z,1520671008.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:36:49.315Z,1520671009.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:36:49.715Z,1520671009.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:36:50.115Z,1520671010.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:36:50.493Z,1520671010.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:36:50.895Z,1520671010.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:36:51.318Z,1520671011.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:36:51.715Z,1520671011.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:36:52.116Z,1520671012.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:36:52.497Z,1520671012.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:36:52.901Z,1520671012.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:36:53.306Z,1520671013.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:36:53.694Z,1520671013.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:36:54.106Z,1520671014.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:36:54.497Z,1520671014.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:36:54.898Z,1520671014.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:36:55.298Z,1520671015.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:36:55.709Z,1520671015.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:36:56.127Z,1520671016.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:36:56.505Z,1520671016.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:36:56.900Z,1520671016.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:36:57.303Z,1520671017.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:36:57.702Z,1520671017.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:36:58.109Z,1520671018.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:36:58.506Z,1520671018.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:36:58.935Z,1520671018.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:36:59.306Z,1520671019.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:36:59.714Z,1520671019.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:37:00.139Z,1520671020.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:37:00.497Z,1520671020.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:37:00.898Z,1520671020.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:37:01.306Z,1520671021.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:37:01.710Z,1520671021.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:37:02.109Z,1520671022.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:37:02.502Z,1520671022.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:37:02.901Z,1520671022.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:37:03.313Z,1520671023.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:37:03.710Z,1520671023.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:37:04.111Z,1520671024.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:37:04.504Z,1520671024.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:37:04.896Z,1520671024.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:37:05.309Z,1520671025.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:37:05.711Z,1520671025.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:37:06.115Z,1520671026.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:37:06.506Z,1520671026.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:37:06.905Z,1520671026.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:37:07.315Z,1520671027.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:37:07.711Z,1520671027.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:37:08.113Z,1520671028.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:37:08.503Z,1520671028.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:37:08.900Z,1520671028.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:37:09.310Z,1520671029.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:37:09.717Z,1520671029.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:37:10.125Z,1520671030.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:37:10.502Z,1520671030.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:37:10.903Z,1520671030.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:37:11.312Z,1520671031.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:37:11.714Z,1520671031.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:37:12.111Z,1520671032.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:37:12.528Z,1520671032.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:37:12.910Z,1520671032.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:37:13.306Z,1520671033.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:37:13.707Z,1520671033.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:37:14.111Z,1520671034.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:37:14.506Z,1520671034.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:37:14.904Z,1520671034.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:37:15.310Z,1520671035.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:37:15.710Z,1520671035.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:37:16.113Z,1520671036.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:37:16.502Z,1520671036.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:37:16.900Z,1520671036.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:37:17.312Z,1520671037.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:37:17.714Z,1520671037.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:37:18.116Z,1520671038.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:37:18.508Z,1520671038.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:37:18.908Z,1520671038.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:37:19.311Z,1520671039.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:37:19.713Z,1520671039.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:37:20.111Z,1520671040.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:37:20.507Z,1520671040.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:37:20.931Z,1520671040.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:37:21.325Z,1520671041.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:37:21.714Z,1520671041.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:37:22.113Z,1520671042.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:37:22.505Z,1520671042.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:37:22.909Z,1520671042.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:37:23.320Z,1520671043.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:37:23.716Z,1520671043.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:37:24.121Z,1520671044.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:37:24.488Z,1520671044.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:37:24.913Z,1520671044.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:37:25.320Z,1520671045.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:37:25.740Z,1520671045.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:37:26.118Z,1520671046.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:37:26.517Z,1520671046.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:37:26.900Z,1520671046.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:37:27.302Z,1520671047.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:37:27.724Z,1520671047.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:37:28.125Z,1520671048.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:37:28.493Z,1520671048.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:37:28.901Z,1520671048.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:37:29.325Z,1520671049.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:37:29.727Z,1520671049.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:37:30.125Z,1520671050.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:37:30.497Z,1520671050.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:37:30.901Z,1520671050.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:37:31.306Z,1520671051.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:37:31.740Z,1520671051.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:37:32.111Z,1520671052.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:37:32.517Z,1520671052.517 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:37:32.517Z,1520671052.517 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 67
2018-03-10T08:37:32.517Z,1520671052.517 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-03-10T08:37:32.544Z,1520671052.544 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:37:32.544Z,1520671052.544 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 67
2018-03-10T08:37:32.544Z,1520671052.544 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-03-10T08:37:32.546Z,1520671052.546 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:37:32.546Z,1520671052.546 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 67
2018-03-10T08:37:32.546Z,1520671052.546 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-10T08:37:32.558Z,1520671052.558 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-03-10T08:37:32.558Z,1520671052.558 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-03-10T08:37:32.558Z,1520671052.558 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-10T08:37:32.916Z,1520671052.916 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-03-10T08:37:32.916Z,1520671052.916 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 67
2018-03-10T08:37:32.916Z,1520671052.916 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-03-10T08:37:32.916Z,1520671052.916 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 67
2018-03-10T08:37:32.917Z,1520671052.917 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-10T08:37:32.917Z,1520671052.917 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 67
2018-03-10T08:37:33.305Z,1520671053.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-03-10T08:37:33.306Z,1520671053.306 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-03-10T08:37:33.306Z,1520671053.306 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-03-10T08:37:33.306Z,1520671053.306 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-03-10T08:37:33.307Z,1520671053.307 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-03-10T08:37:33.307Z,1520671053.307 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-03-10T08:37:33.308Z,1520671053.308 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-10T08:37:33.308Z,1520671053.308 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-10T08:37:33.308Z,1520671053.308 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-10T08:37:33.709Z,1520671053.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-03-10T08:37:33.710Z,1520671053.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:37:34.114Z,1520671054.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-03-10T08:37:34.115Z,1520671054.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:37:34.501Z,1520671054.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-03-10T08:37:34.502Z,1520671054.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:37:34.903Z,1520671054.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-03-10T08:37:34.904Z,1520671054.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:37:35.314Z,1520671055.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-03-10T08:37:35.315Z,1520671055.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:37:35.720Z,1520671055.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-03-10T08:37:35.721Z,1520671055.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:37:36.109Z,1520671056.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-03-10T08:37:36.110Z,1520671056.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:37:36.500Z,1520671056.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-03-10T08:37:36.501Z,1520671056.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:37:36.920Z,1520671056.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-03-10T08:37:36.921Z,1520671056.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:37:37.310Z,1520671057.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-03-10T08:37:37.311Z,1520671057.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:37:37.716Z,1520671057.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-03-10T08:37:37.717Z,1520671057.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:37:38.117Z,1520671058.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-03-10T08:37:38.117Z,1520671058.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:37:38.517Z,1520671058.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-03-10T08:37:38.517Z,1520671058.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:37:38.904Z,1520671058.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-03-10T08:37:38.905Z,1520671058.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:37:39.308Z,1520671059.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-03-10T08:37:39.309Z,1520671059.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:37:39.710Z,1520671059.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-03-10T08:37:39.712Z,1520671059.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:37:40.112Z,1520671060.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-03-10T08:37:40.113Z,1520671060.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:37:43.215Z,1520671063.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.7 s old, using for 20.0 s.
2018-03-10T08:37:43.216Z,1520671063.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:37:43.356Z,1520671063.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-03-10T08:37:43.357Z,1520671063.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:37:43.728Z,1520671063.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-03-10T08:37:43.729Z,1520671063.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:37:44.100Z,1520671064.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-03-10T08:37:44.101Z,1520671064.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:37:44.501Z,1520671064.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-03-10T08:37:44.502Z,1520671064.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:37:44.897Z,1520671064.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-03-10T08:37:44.898Z,1520671064.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:37:45.296Z,1520671065.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-03-10T08:37:45.297Z,1520671065.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:37:45.697Z,1520671065.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-03-10T08:37:45.698Z,1520671065.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:37:46.097Z,1520671066.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-03-10T08:37:46.098Z,1520671066.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:37:46.508Z,1520671066.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-03-10T08:37:46.509Z,1520671066.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:37:46.901Z,1520671066.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-03-10T08:37:46.902Z,1520671066.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:37:47.308Z,1520671067.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-03-10T08:37:47.309Z,1520671067.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:37:47.697Z,1520671067.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-03-10T08:37:47.698Z,1520671067.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:37:48.097Z,1520671068.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-03-10T08:37:48.098Z,1520671068.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:37:48.497Z,1520671068.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-03-10T08:37:48.498Z,1520671068.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:37:48.905Z,1520671068.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-03-10T08:37:48.905Z,1520671068.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:37:49.300Z,1520671069.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-03-10T08:37:49.301Z,1520671069.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:37:49.709Z,1520671069.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-03-10T08:37:49.710Z,1520671069.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:37:50.108Z,1520671070.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-03-10T08:37:50.109Z,1520671070.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:37:50.520Z,1520671070.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-03-10T08:37:50.521Z,1520671070.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:37:50.897Z,1520671070.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2018-03-10T08:37:50.898Z,1520671070.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:37:51.300Z,1520671071.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2018-03-10T08:37:51.300Z,1520671071.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:37:51.701Z,1520671071.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2018-03-10T08:37:51.702Z,1520671071.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:37:52.100Z,1520671072.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2018-03-10T08:37:52.101Z,1520671072.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:37:52.497Z,1520671072.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 20.0 s old, using for 20.0 s.
2018-03-10T08:37:52.498Z,1520671072.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:37:52.877Z,1520671072.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:37:53.299Z,1520671073.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:37:53.701Z,1520671073.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:37:54.102Z,1520671074.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:37:54.507Z,1520671074.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:37:54.906Z,1520671074.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:37:55.283Z,1520671075.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:37:55.706Z,1520671075.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:37:56.106Z,1520671076.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:37:56.486Z,1520671076.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:37:56.889Z,1520671076.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:37:57.311Z,1520671077.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:37:57.690Z,1520671077.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:37:58.113Z,1520671078.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:37:58.485Z,1520671078.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:37:58.889Z,1520671078.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:37:59.312Z,1520671079.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:37:59.694Z,1520671079.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:38:00.094Z,1520671080.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:38:00.485Z,1520671080.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:38:00.892Z,1520671080.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:38:01.315Z,1520671081.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:38:01.695Z,1520671081.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:38:02.090Z,1520671082.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:38:02.485Z,1520671082.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:38:02.890Z,1520671082.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:38:03.322Z,1520671083.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:38:03.693Z,1520671083.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:38:04.094Z,1520671084.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:38:04.492Z,1520671084.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:38:04.893Z,1520671084.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:38:05.300Z,1520671085.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:38:05.709Z,1520671085.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:38:06.105Z,1520671086.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:38:06.489Z,1520671086.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:38:06.887Z,1520671086.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:38:07.294Z,1520671087.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:38:07.697Z,1520671087.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:38:08.099Z,1520671088.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:38:08.491Z,1520671088.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:38:08.889Z,1520671088.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:38:09.305Z,1520671089.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:38:09.690Z,1520671089.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:38:10.094Z,1520671090.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:38:10.495Z,1520671090.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:38:10.890Z,1520671090.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:38:11.295Z,1520671091.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:38:11.699Z,1520671091.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:38:12.092Z,1520671092.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:38:12.486Z,1520671092.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:38:12.894Z,1520671092.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:38:13.299Z,1520671093.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:38:13.698Z,1520671093.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:38:14.099Z,1520671094.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:38:14.490Z,1520671094.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:38:14.895Z,1520671094.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:38:15.311Z,1520671095.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:38:15.721Z,1520671095.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:38:16.102Z,1520671096.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:38:16.504Z,1520671096.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:38:16.905Z,1520671096.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:38:17.304Z,1520671097.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:38:17.717Z,1520671097.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:38:18.103Z,1520671098.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:38:18.499Z,1520671098.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:38:18.905Z,1520671098.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:38:19.309Z,1520671099.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:38:19.708Z,1520671099.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:38:20.111Z,1520671100.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:38:20.485Z,1520671100.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:38:20.880Z,1520671100.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:38:21.308Z,1520671101.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:38:21.708Z,1520671101.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:38:22.110Z,1520671102.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:38:22.483Z,1520671102.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:38:22.886Z,1520671102.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:38:23.291Z,1520671103.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:38:23.710Z,1520671103.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:38:24.112Z,1520671104.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:38:24.489Z,1520671104.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:38:24.881Z,1520671104.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:38:25.312Z,1520671105.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:38:25.710Z,1520671105.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:38:26.107Z,1520671106.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:38:26.493Z,1520671106.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:38:26.885Z,1520671106.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:38:27.298Z,1520671107.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:38:27.696Z,1520671107.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:38:28.143Z,1520671108.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:38:28.501Z,1520671108.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:38:28.884Z,1520671108.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:38:29.290Z,1520671109.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:38:29.694Z,1520671109.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:38:30.091Z,1520671110.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:38:30.491Z,1520671110.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:38:30.888Z,1520671110.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:38:31.297Z,1520671111.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:38:31.697Z,1520671111.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:38:32.098Z,1520671112.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:38:32.489Z,1520671112.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:38:32.885Z,1520671112.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:38:33.294Z,1520671113.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:38:33.697Z,1520671113.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:38:34.099Z,1520671114.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:38:34.486Z,1520671114.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:38:34.893Z,1520671114.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:38:35.305Z,1520671115.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:38:35.698Z,1520671115.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:38:36.105Z,1520671116.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:38:36.489Z,1520671116.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:38:36.885Z,1520671116.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:38:37.294Z,1520671117.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:38:37.697Z,1520671117.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:38:38.105Z,1520671118.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:38:38.495Z,1520671118.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:38:38.926Z,1520671118.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:38:39.298Z,1520671119.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:38:39.705Z,1520671119.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:38:40.105Z,1520671120.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:38:40.496Z,1520671120.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:38:43.603Z,1520671123.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:38:43.771Z,1520671123.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:38:44.106Z,1520671124.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:38:44.508Z,1520671124.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:38:44.913Z,1520671124.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:38:45.283Z,1520671125.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:38:45.689Z,1520671125.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:38:46.107Z,1520671126.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:38:46.509Z,1520671126.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:38:46.911Z,1520671126.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:38:47.305Z,1520671127.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:38:47.684Z,1520671127.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:38:48.109Z,1520671128.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:38:48.492Z,1520671128.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:38:48.891Z,1520671128.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:38:49.318Z,1520671129.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:38:49.716Z,1520671129.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:38:50.116Z,1520671130.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:38:50.494Z,1520671130.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:38:50.892Z,1520671130.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:38:51.319Z,1520671131.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:38:51.715Z,1520671131.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:38:52.118Z,1520671132.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:38:52.494Z,1520671132.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:38:52.893Z,1520671132.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:38:53.317Z,1520671133.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:38:53.714Z,1520671133.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:38:54.112Z,1520671134.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:38:54.497Z,1520671134.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:38:54.893Z,1520671134.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:38:55.316Z,1520671135.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:38:55.710Z,1520671135.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:38:56.136Z,1520671136.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:38:56.565Z,1520671136.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:38:56.900Z,1520671136.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:38:57.324Z,1520671137.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:38:57.723Z,1520671137.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:38:58.127Z,1520671138.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:38:58.497Z,1520671138.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:38:58.892Z,1520671138.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:38:59.296Z,1520671139.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:38:59.706Z,1520671139.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:39:00.125Z,1520671140.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:39:00.491Z,1520671140.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:39:00.894Z,1520671140.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:39:01.306Z,1520671141.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:39:01.698Z,1520671141.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:39:02.099Z,1520671142.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:39:02.501Z,1520671142.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:39:02.897Z,1520671142.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:39:03.299Z,1520671143.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:39:03.703Z,1520671143.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:39:04.098Z,1520671144.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:39:04.494Z,1520671144.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:39:04.896Z,1520671144.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:39:05.297Z,1520671145.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:39:05.698Z,1520671145.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:39:06.097Z,1520671146.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:39:06.501Z,1520671146.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:39:06.897Z,1520671146.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:39:07.299Z,1520671147.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:39:07.698Z,1520671147.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:39:08.098Z,1520671148.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:39:08.501Z,1520671148.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:39:08.899Z,1520671148.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:39:09.350Z,1520671149.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:39:09.731Z,1520671149.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:39:10.101Z,1520671150.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:39:10.493Z,1520671150.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:39:10.901Z,1520671150.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:39:11.301Z,1520671151.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:39:11.702Z,1520671151.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:39:12.098Z,1520671152.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:39:12.494Z,1520671152.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:39:12.892Z,1520671152.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:39:13.298Z,1520671153.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:39:13.709Z,1520671153.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:39:14.101Z,1520671154.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:39:14.497Z,1520671154.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:39:14.901Z,1520671154.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:39:15.302Z,1520671155.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:39:15.705Z,1520671155.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:39:16.101Z,1520671156.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:39:16.497Z,1520671156.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:39:16.893Z,1520671156.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:39:17.307Z,1520671157.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:39:17.713Z,1520671157.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:39:18.102Z,1520671158.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:39:18.498Z,1520671158.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:39:18.895Z,1520671158.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:39:19.306Z,1520671159.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:39:19.705Z,1520671159.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:39:20.113Z,1520671160.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:39:20.498Z,1520671160.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:39:20.897Z,1520671160.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:39:21.309Z,1520671161.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:39:21.734Z,1520671161.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:39:22.144Z,1520671162.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:39:22.497Z,1520671162.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:39:22.893Z,1520671162.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:39:23.309Z,1520671163.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:39:23.705Z,1520671163.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:39:24.106Z,1520671164.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:39:24.497Z,1520671164.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:39:24.892Z,1520671164.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:39:25.306Z,1520671165.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:39:25.705Z,1520671165.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:39:26.106Z,1520671166.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:39:26.497Z,1520671166.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:39:26.892Z,1520671166.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:39:27.305Z,1520671167.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:39:27.702Z,1520671167.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:39:28.106Z,1520671168.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:39:28.497Z,1520671168.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:39:28.900Z,1520671168.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:39:29.302Z,1520671169.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:39:29.706Z,1520671169.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:39:30.106Z,1520671170.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:39:30.497Z,1520671170.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:39:30.893Z,1520671170.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:39:31.302Z,1520671171.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:39:31.705Z,1520671171.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:39:32.113Z,1520671172.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:39:32.498Z,1520671172.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:39:32.895Z,1520671172.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:39:33.306Z,1520671173.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:39:33.706Z,1520671173.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:39:34.118Z,1520671174.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:39:34.521Z,1520671174.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:39:34.898Z,1520671174.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:39:35.311Z,1520671175.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:39:35.707Z,1520671175.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:39:36.106Z,1520671176.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:39:36.501Z,1520671176.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:39:36.900Z,1520671176.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:39:37.308Z,1520671177.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:39:37.708Z,1520671177.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:39:38.107Z,1520671178.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:39:38.496Z,1520671178.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:39:38.899Z,1520671178.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:39:39.308Z,1520671179.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:39:39.709Z,1520671179.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:39:40.107Z,1520671180.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:39:40.505Z,1520671180.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:39:43.613Z,1520671183.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:39:43.769Z,1520671183.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:39:44.146Z,1520671184.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:39:44.520Z,1520671184.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:39:44.918Z,1520671184.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:39:45.325Z,1520671185.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:39:45.717Z,1520671185.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:39:46.122Z,1520671186.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:39:46.628Z,1520671186.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:39:46.961Z,1520671186.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:39:47.329Z,1520671187.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:39:47.716Z,1520671187.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:39:48.116Z,1520671188.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:39:48.526Z,1520671188.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:39:48.969Z,1520671188.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:39:49.337Z,1520671189.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:39:49.731Z,1520671189.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:39:50.129Z,1520671190.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:39:50.526Z,1520671190.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:39:50.932Z,1520671190.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:39:51.331Z,1520671191.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:39:51.730Z,1520671191.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:39:52.131Z,1520671192.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:39:52.512Z,1520671192.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:39:52.905Z,1520671192.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:39:53.331Z,1520671193.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:39:53.733Z,1520671193.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:39:54.130Z,1520671194.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:39:54.509Z,1520671194.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:39:54.937Z,1520671194.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:39:55.337Z,1520671195.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:39:55.731Z,1520671195.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:39:56.140Z,1520671196.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:39:56.518Z,1520671196.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:39:56.919Z,1520671196.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:39:57.326Z,1520671197.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:39:57.726Z,1520671197.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:39:58.125Z,1520671198.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:39:58.528Z,1520671198.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:39:58.923Z,1520671198.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:39:59.352Z,1520671199.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:39:59.749Z,1520671199.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:40:00.123Z,1520671200.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:40:00.525Z,1520671200.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:40:00.926Z,1520671200.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:40:01.328Z,1520671201.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:40:01.736Z,1520671201.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:40:02.140Z,1520671202.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:40:02.525Z,1520671202.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:40:02.925Z,1520671202.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:40:03.340Z,1520671203.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:40:03.720Z,1520671203.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:40:04.132Z,1520671204.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:40:04.526Z,1520671204.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:40:04.925Z,1520671204.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:40:05.329Z,1520671205.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:40:05.734Z,1520671205.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:40:06.128Z,1520671206.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:40:06.525Z,1520671206.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:40:06.929Z,1520671206.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:40:07.327Z,1520671207.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:40:07.738Z,1520671207.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:40:08.134Z,1520671208.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:40:08.525Z,1520671208.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:40:08.925Z,1520671208.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:40:09.334Z,1520671209.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:40:09.729Z,1520671209.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:40:10.149Z,1520671210.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:40:10.547Z,1520671210.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:40:10.932Z,1520671210.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:40:11.352Z,1520671211.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:40:11.784Z,1520671211.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:40:12.145Z,1520671212.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:40:12.533Z,1520671212.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:40:12.941Z,1520671212.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:40:13.337Z,1520671213.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:40:13.705Z,1520671213.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:40:14.114Z,1520671214.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:40:14.520Z,1520671214.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:40:14.922Z,1520671214.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:40:15.339Z,1520671215.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:40:15.728Z,1520671215.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:40:16.129Z,1520671216.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:40:16.529Z,1520671216.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:40:16.928Z,1520671216.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:40:17.329Z,1520671217.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:40:17.737Z,1520671217.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:40:18.130Z,1520671218.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:40:18.507Z,1520671218.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:40:18.909Z,1520671218.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:40:19.336Z,1520671219.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:40:19.743Z,1520671219.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:40:20.139Z,1520671220.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:40:20.514Z,1520671220.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:40:20.943Z,1520671220.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:40:21.353Z,1520671221.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:40:21.730Z,1520671221.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:40:22.164Z,1520671222.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:40:22.518Z,1520671222.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:40:22.914Z,1520671222.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:40:23.325Z,1520671223.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:40:23.733Z,1520671223.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:40:24.133Z,1520671224.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:40:24.537Z,1520671224.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:40:24.921Z,1520671224.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:40:25.322Z,1520671225.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:40:25.726Z,1520671225.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:40:26.130Z,1520671226.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:40:26.522Z,1520671226.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:40:26.921Z,1520671226.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:40:27.336Z,1520671227.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:40:27.724Z,1520671227.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:40:28.123Z,1520671228.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:40:28.517Z,1520671228.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:40:28.918Z,1520671228.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:40:29.322Z,1520671229.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:40:29.722Z,1520671229.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:40:30.133Z,1520671230.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:40:30.518Z,1520671230.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:40:30.917Z,1520671230.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:40:31.326Z,1520671231.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:40:31.726Z,1520671231.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:40:32.122Z,1520671232.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:40:32.518Z,1520671232.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:40:32.914Z,1520671232.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:40:33.333Z,1520671233.333 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:40:33.334Z,1520671233.334 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 68
2018-03-10T08:40:33.334Z,1520671233.334 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-03-10T08:40:33.335Z,1520671233.335 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:40:33.336Z,1520671233.336 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 68
2018-03-10T08:40:33.336Z,1520671233.336 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-03-10T08:40:33.337Z,1520671233.337 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:40:33.337Z,1520671233.337 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 68
2018-03-10T08:40:33.337Z,1520671233.337 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-10T08:40:33.357Z,1520671233.357 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-03-10T08:40:33.357Z,1520671233.357 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-03-10T08:40:33.357Z,1520671233.357 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-10T08:40:33.746Z,1520671233.746 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-03-10T08:40:33.746Z,1520671233.746 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 68
2018-03-10T08:40:33.747Z,1520671233.747 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-03-10T08:40:33.747Z,1520671233.747 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 68
2018-03-10T08:40:33.747Z,1520671233.747 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-10T08:40:33.747Z,1520671233.747 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 68
2018-03-10T08:40:34.124Z,1520671234.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-03-10T08:40:34.124Z,1520671234.124 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-03-10T08:40:34.125Z,1520671234.125 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-03-10T08:40:34.125Z,1520671234.125 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-03-10T08:40:34.125Z,1520671234.125 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-03-10T08:40:34.126Z,1520671234.126 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-03-10T08:40:34.126Z,1520671234.126 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-10T08:40:34.126Z,1520671234.126 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-10T08:40:34.127Z,1520671234.127 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-10T08:40:34.528Z,1520671234.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-03-10T08:40:34.529Z,1520671234.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:40:34.929Z,1520671234.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-03-10T08:40:34.930Z,1520671234.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:40:35.332Z,1520671235.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-03-10T08:40:35.333Z,1520671235.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:40:35.736Z,1520671235.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-03-10T08:40:35.737Z,1520671235.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:40:36.130Z,1520671236.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-03-10T08:40:36.131Z,1520671236.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:40:36.509Z,1520671236.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-03-10T08:40:36.510Z,1520671236.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:40:36.944Z,1520671236.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-03-10T08:40:36.945Z,1520671236.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:40:37.344Z,1520671237.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-03-10T08:40:37.345Z,1520671237.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:40:37.719Z,1520671237.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-03-10T08:40:37.720Z,1520671237.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:40:38.141Z,1520671238.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-03-10T08:40:38.141Z,1520671238.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:40:38.514Z,1520671238.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-03-10T08:40:38.515Z,1520671238.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:40:38.940Z,1520671238.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-03-10T08:40:38.941Z,1520671238.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:40:39.318Z,1520671239.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-03-10T08:40:39.319Z,1520671239.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:40:39.740Z,1520671239.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-03-10T08:40:39.741Z,1520671239.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:40:39.744Z,1520671239.744 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-03-10T08:35:39.3Z
2018-03-10T08:40:39.745Z,1520671239.745 [Default:CheckIn:Read_GPS] Stopped
2018-03-10T08:40:39.745Z,1520671239.745 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-03-10T08:40:40.114Z,1520671240.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-03-10T08:40:40.115Z,1520671240.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:40:40.648Z,1520671240.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.3 s old, using for 20.0 s.
2018-03-10T08:40:40.649Z,1520671240.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:40:43.608Z,1520671243.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.3 s old, using for 20.0 s.
2018-03-10T08:40:43.609Z,1520671243.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:40:43.764Z,1520671243.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-03-10T08:40:43.765Z,1520671243.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:40:44.040Z,1520671244.040 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20180310T051512/Courier0080.lzma
2018-03-10T08:40:44.102Z,1520671244.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-03-10T08:40:44.103Z,1520671244.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:40:44.500Z,1520671244.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-03-10T08:40:44.501Z,1520671244.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:40:44.837Z,1520671244.837 [DataOverHttps](INFO): Moved sent file to Logs/20180310T051512/Courier0080.lzma.bak
2018-03-10T08:40:44.837Z,1520671244.837 [DataOverHttps](INFO): SBD MOMSN=8003212
2018-03-10T08:40:44.896Z,1520671244.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-03-10T08:40:44.896Z,1520671244.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:40:45.546Z,1520671245.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.2 s old, using for 20.0 s.
2018-03-10T08:40:45.571Z,1520671245.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:40:45.710Z,1520671245.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-03-10T08:40:45.711Z,1520671245.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:40:46.089Z,1520671246.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-03-10T08:40:46.090Z,1520671246.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:40:49.217Z,1520671249.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.9 s old, using for 20.0 s.
2018-03-10T08:40:49.218Z,1520671249.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:40:49.380Z,1520671249.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-03-10T08:40:49.381Z,1520671249.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:40:49.724Z,1520671249.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-03-10T08:40:49.725Z,1520671249.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:40:50.124Z,1520671250.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-03-10T08:40:50.124Z,1520671250.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:40:50.524Z,1520671250.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-03-10T08:40:50.525Z,1520671250.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:40:50.895Z,1520671250.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-03-10T08:40:50.896Z,1520671250.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:40:51.299Z,1520671251.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-03-10T08:40:51.299Z,1520671251.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:40:54.401Z,1520671254.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:40:54.549Z,1520671254.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:40:54.869Z,1520671254.869 [DataOverHttps](INFO): Sending 170 bytes from file Logs/20180310T051512/Express0081.lzma
2018-03-10T08:40:54.905Z,1520671254.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:40:55.302Z,1520671255.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:40:55.658Z,1520671255.658 [DataOverHttps](INFO): Moved sent file to Logs/20180310T051512/Express0081.lzma.bak
2018-03-10T08:40:55.658Z,1520671255.658 [DataOverHttps](INFO): SBD MOMSN=8003214
2018-03-10T08:40:55.747Z,1520671255.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:40:56.362Z,1520671256.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:40:56.388Z,1520671256.388 [Default:CheckIn:Read_Iridium] Stopped
2018-03-10T08:40:56.388Z,1520671256.388 [Default:CheckIn:C.Wait] Running Loop=1
2018-03-10T08:40:56.388Z,1520671256.388 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-03-10T08:40:56.526Z,1520671256.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:40:56.909Z,1520671256.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:40:57.308Z,1520671257.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:40:57.702Z,1520671257.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:40:58.102Z,1520671258.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:40:58.508Z,1520671258.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:41:01.653Z,1520671261.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:41:01.801Z,1520671261.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:41:02.161Z,1520671262.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:41:02.561Z,1520671262.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:41:02.982Z,1520671262.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:41:03.344Z,1520671263.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:41:03.753Z,1520671263.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:41:04.153Z,1520671264.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:41:04.555Z,1520671264.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:41:04.954Z,1520671264.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:41:05.354Z,1520671265.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:41:05.751Z,1520671265.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:41:06.151Z,1520671266.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:41:06.550Z,1520671266.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:41:06.949Z,1520671266.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:41:07.353Z,1520671267.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:41:07.761Z,1520671267.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:41:08.164Z,1520671268.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:41:08.543Z,1520671268.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:41:08.947Z,1520671268.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:41:09.351Z,1520671269.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:41:09.752Z,1520671269.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:41:10.151Z,1520671270.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:41:10.554Z,1520671270.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:41:10.955Z,1520671270.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:41:11.354Z,1520671271.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:41:11.842Z,1520671271.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:41:12.151Z,1520671272.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:41:12.549Z,1520671272.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:41:12.957Z,1520671272.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:41:13.361Z,1520671273.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:41:13.754Z,1520671273.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:41:14.160Z,1520671274.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:41:14.547Z,1520671274.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:41:14.948Z,1520671274.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:41:15.357Z,1520671275.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:41:15.765Z,1520671275.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:41:16.157Z,1520671276.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:41:16.564Z,1520671276.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:41:16.958Z,1520671276.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:41:17.365Z,1520671277.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:41:17.752Z,1520671277.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:41:18.152Z,1520671278.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:41:18.550Z,1520671278.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:41:18.960Z,1520671278.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:41:19.355Z,1520671279.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:41:19.763Z,1520671279.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:41:20.152Z,1520671280.152 [BPC1](ERROR): Failed to receive battery data
2018-03-10T08:41:20.152Z,1520671280.152 [BPC1] Communications Fault, FailCount= 1
2018-03-10T08:41:20.152Z,1520671280.152 [BPC1](ERROR): Communications Fault
2018-03-10T08:41:20.159Z,1520671280.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:41:20.200Z,1520671280.200 [CBIT](ERROR): Communications Fault in component: BPC1
2018-03-10T08:41:20.554Z,1520671280.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:41:20.957Z,1520671280.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:41:21.352Z,1520671281.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:41:21.364Z,1520671281.364 [CBIT](INFO): Clearing failed state for component BPC1
2018-03-10T08:41:21.364Z,1520671281.364 [BPC1] No Fault, FailCount= 1
2018-03-10T08:41:21.808Z,1520671281.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:41:22.149Z,1520671282.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:41:22.566Z,1520671282.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:41:22.959Z,1520671282.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:41:23.358Z,1520671283.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:41:23.756Z,1520671283.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:41:24.154Z,1520671284.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:41:24.552Z,1520671284.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:41:24.955Z,1520671284.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:41:25.363Z,1520671285.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:41:25.766Z,1520671285.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:41:26.166Z,1520671286.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:41:26.533Z,1520671286.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:41:26.959Z,1520671286.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:41:27.363Z,1520671287.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:41:27.758Z,1520671287.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:41:28.159Z,1520671288.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:41:28.564Z,1520671288.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:41:28.967Z,1520671288.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:41:29.367Z,1520671289.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:41:29.764Z,1520671289.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:41:30.159Z,1520671290.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:41:30.559Z,1520671290.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:41:30.963Z,1520671290.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:41:31.357Z,1520671291.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:41:31.770Z,1520671291.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:41:32.161Z,1520671292.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:41:32.537Z,1520671292.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:41:32.963Z,1520671292.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:41:33.367Z,1520671293.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:41:33.768Z,1520671293.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:41:34.161Z,1520671294.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:41:34.567Z,1520671294.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:41:34.962Z,1520671294.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:41:35.373Z,1520671295.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:41:35.741Z,1520671295.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:41:36.164Z,1520671296.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:41:36.547Z,1520671296.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:41:36.948Z,1520671296.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:41:37.347Z,1520671297.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:41:37.771Z,1520671297.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:41:38.170Z,1520671298.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:41:38.542Z,1520671298.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:41:38.948Z,1520671298.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:41:39.345Z,1520671299.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:41:39.742Z,1520671299.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:41:40.153Z,1520671300.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:41:40.582Z,1520671300.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:41:40.947Z,1520671300.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:41:41.380Z,1520671301.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:41:41.749Z,1520671301.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:41:42.153Z,1520671302.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:41:42.558Z,1520671302.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:41:42.961Z,1520671302.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:41:43.369Z,1520671303.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:41:43.769Z,1520671303.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:41:44.168Z,1520671304.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:41:44.553Z,1520671304.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:41:44.953Z,1520671304.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:41:45.369Z,1520671305.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:41:45.763Z,1520671305.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:41:46.161Z,1520671306.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:41:46.569Z,1520671306.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:41:46.946Z,1520671306.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:41:47.374Z,1520671307.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:41:47.748Z,1520671307.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:41:48.174Z,1520671308.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:41:48.584Z,1520671308.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:41:48.952Z,1520671308.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:41:49.350Z,1520671309.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:41:49.758Z,1520671309.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:41:50.180Z,1520671310.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:41:50.542Z,1520671310.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:41:50.948Z,1520671310.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:41:51.350Z,1520671311.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:41:51.757Z,1520671311.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:41:52.145Z,1520671312.145 [BPC1](FAULT): Failed to initialize
2018-03-10T08:41:52.146Z,1520671312.146 [BPC1] Communications Fault, FailCount= 2
2018-03-10T08:41:52.146Z,1520671312.146 [BPC1](ERROR): Communications Fault
2018-03-10T08:41:52.153Z,1520671312.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:41:52.186Z,1520671312.186 [CBIT](ERROR): Communications Fault in component: BPC1
2018-03-10T08:41:52.554Z,1520671312.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:41:52.954Z,1520671312.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:41:53.354Z,1520671313.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:41:53.383Z,1520671313.383 [CBIT](INFO): Clearing failed state for component BPC1
2018-03-10T08:41:53.383Z,1520671313.383 [BPC1] No Fault, FailCount= 2
2018-03-10T08:41:53.793Z,1520671313.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:41:54.152Z,1520671314.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:41:54.551Z,1520671314.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:41:54.953Z,1520671314.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:41:55.354Z,1520671315.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:41:55.754Z,1520671315.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:41:56.154Z,1520671316.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:41:56.542Z,1520671316.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:41:56.948Z,1520671316.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:42:00.051Z,1520671320.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:42:00.188Z,1520671320.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:42:00.536Z,1520671320.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:42:00.941Z,1520671320.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:42:01.340Z,1520671321.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:42:01.734Z,1520671321.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:42:02.134Z,1520671322.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:42:02.522Z,1520671322.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:42:02.921Z,1520671322.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:42:03.351Z,1520671323.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:42:03.725Z,1520671323.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:42:04.126Z,1520671324.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:42:04.526Z,1520671324.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:42:04.917Z,1520671324.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:42:05.325Z,1520671325.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:42:05.727Z,1520671325.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:42:06.125Z,1520671326.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:42:06.524Z,1520671326.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:42:06.924Z,1520671326.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:42:07.327Z,1520671327.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:42:07.726Z,1520671327.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:42:08.133Z,1520671328.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:42:08.525Z,1520671328.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:42:08.925Z,1520671328.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:42:09.333Z,1520671329.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:42:09.730Z,1520671329.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:42:10.133Z,1520671330.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:42:10.529Z,1520671330.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:42:10.924Z,1520671330.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:42:11.328Z,1520671331.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:42:11.727Z,1520671331.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:42:12.133Z,1520671332.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:42:12.527Z,1520671332.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:42:12.923Z,1520671332.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:42:13.327Z,1520671333.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:42:13.733Z,1520671333.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:42:14.129Z,1520671334.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:42:14.533Z,1520671334.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:42:14.925Z,1520671334.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:42:15.328Z,1520671335.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:42:15.732Z,1520671335.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:42:16.126Z,1520671336.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:42:16.524Z,1520671336.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:42:16.923Z,1520671336.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:42:17.326Z,1520671337.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:42:17.726Z,1520671337.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:42:18.127Z,1520671338.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:42:18.527Z,1520671338.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:42:18.926Z,1520671338.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:42:19.333Z,1520671339.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:42:19.741Z,1520671339.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:42:20.166Z,1520671340.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:42:20.528Z,1520671340.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:42:20.929Z,1520671340.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:42:21.309Z,1520671341.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:42:21.714Z,1520671341.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:42:22.117Z,1520671342.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:42:22.530Z,1520671342.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:42:22.930Z,1520671342.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:42:23.333Z,1520671343.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:42:23.805Z,1520671343.805 [BPC1](FAULT): Failed to initialize
2018-03-10T08:42:23.805Z,1520671343.805 [BPC1] Communications Fault, FailCount= 3
2018-03-10T08:42:23.805Z,1520671343.805 [BPC1](ERROR): Communications Fault
2018-03-10T08:42:23.847Z,1520671343.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:42:23.948Z,1520671343.948 [CBIT](ERROR): Communications Fault in component: BPC1
2018-03-10T08:42:24.121Z,1520671344.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:42:24.521Z,1520671344.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:42:24.932Z,1520671344.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:42:24.954Z,1520671344.954 [CBIT](INFO): Clearing failed state for component BPC1
2018-03-10T08:42:24.954Z,1520671344.954 [BPC1] No Fault, FailCount= 3
2018-03-10T08:42:25.393Z,1520671345.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:42:25.748Z,1520671345.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:42:26.148Z,1520671346.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:42:26.513Z,1520671346.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:42:26.941Z,1520671346.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:42:27.348Z,1520671347.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:42:27.743Z,1520671347.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:42:28.130Z,1520671348.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:42:28.521Z,1520671348.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:42:28.921Z,1520671348.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:42:29.322Z,1520671349.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:42:29.722Z,1520671349.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:42:30.122Z,1520671350.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:42:30.522Z,1520671350.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:42:30.920Z,1520671350.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:42:31.326Z,1520671351.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:42:31.749Z,1520671351.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:42:32.150Z,1520671352.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:42:32.529Z,1520671352.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:42:32.925Z,1520671352.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:42:33.351Z,1520671353.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:42:33.748Z,1520671353.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:42:34.148Z,1520671354.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:42:34.520Z,1520671354.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:42:34.921Z,1520671354.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:42:35.348Z,1520671355.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:42:35.751Z,1520671355.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:42:36.148Z,1520671356.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:42:36.519Z,1520671356.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:42:36.916Z,1520671356.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:42:37.348Z,1520671357.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:42:37.726Z,1520671357.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:42:38.126Z,1520671358.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:42:38.521Z,1520671358.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:42:38.925Z,1520671358.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:42:39.350Z,1520671359.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:42:39.726Z,1520671359.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:42:40.149Z,1520671360.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:42:40.521Z,1520671360.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:42:40.922Z,1520671360.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:42:41.326Z,1520671361.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:42:41.726Z,1520671361.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:42:42.148Z,1520671362.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:42:42.521Z,1520671362.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:42:42.921Z,1520671362.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:42:43.326Z,1520671363.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:42:43.748Z,1520671363.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:42:44.123Z,1520671364.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:42:44.529Z,1520671364.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:42:44.921Z,1520671364.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:42:45.350Z,1520671365.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:42:45.726Z,1520671365.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:42:46.150Z,1520671366.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:42:46.522Z,1520671366.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:42:46.921Z,1520671366.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:42:47.349Z,1520671367.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:42:47.728Z,1520671367.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:42:48.148Z,1520671368.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:42:48.522Z,1520671368.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:42:48.923Z,1520671368.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:42:49.322Z,1520671369.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:42:49.749Z,1520671369.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:42:50.149Z,1520671370.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:42:50.523Z,1520671370.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:42:50.925Z,1520671370.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:42:51.327Z,1520671371.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:42:51.723Z,1520671371.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:42:52.149Z,1520671372.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:42:52.519Z,1520671372.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:42:52.918Z,1520671372.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:42:53.324Z,1520671373.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:42:53.724Z,1520671373.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:42:54.147Z,1520671374.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:42:54.522Z,1520671374.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:42:54.921Z,1520671374.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:42:55.323Z,1520671375.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:42:55.728Z,1520671375.728 [BPC1](FAULT): Failed to initialize
2018-03-10T08:42:55.728Z,1520671375.728 [BPC1] Communications Fault, FailCount= 4
2018-03-10T08:42:55.728Z,1520671375.728 [BPC1](ERROR): Communications Fault
2018-03-10T08:42:55.763Z,1520671375.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:42:55.788Z,1520671375.788 [CBIT](ERROR): Communications Fault in component: BPC1
2018-03-10T08:42:56.126Z,1520671376.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:42:56.524Z,1520671376.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:42:56.923Z,1520671376.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:42:56.948Z,1520671376.948 [CBIT](INFO): Clearing failed state for component BPC1
2018-03-10T08:42:56.951Z,1520671376.951 [BPC1] No Fault, FailCount= 4
2018-03-10T08:42:57.377Z,1520671377.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:43:00.426Z,1520671380.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:43:00.573Z,1520671380.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:43:00.925Z,1520671380.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:43:01.322Z,1520671381.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:43:01.724Z,1520671381.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:43:02.120Z,1520671382.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:43:02.532Z,1520671382.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:43:02.937Z,1520671382.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:43:03.330Z,1520671383.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:43:03.715Z,1520671383.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:43:04.125Z,1520671384.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:43:04.518Z,1520671384.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:43:04.921Z,1520671384.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:43:05.337Z,1520671385.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:43:05.737Z,1520671385.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:43:06.130Z,1520671386.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:43:06.521Z,1520671386.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:43:06.918Z,1520671386.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:43:07.327Z,1520671387.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:43:07.729Z,1520671387.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:43:08.130Z,1520671388.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:43:08.521Z,1520671388.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:43:08.920Z,1520671388.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:43:09.333Z,1520671389.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:43:09.729Z,1520671389.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:43:10.137Z,1520671390.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:43:10.518Z,1520671390.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:43:10.921Z,1520671390.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:43:11.329Z,1520671391.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:43:11.729Z,1520671391.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:43:12.130Z,1520671392.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:43:12.521Z,1520671392.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:43:12.919Z,1520671392.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:43:13.327Z,1520671393.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:43:13.737Z,1520671393.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:43:14.137Z,1520671394.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:43:14.515Z,1520671394.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:43:14.921Z,1520671394.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:43:15.326Z,1520671395.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:43:15.730Z,1520671395.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:43:16.137Z,1520671396.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:43:16.517Z,1520671396.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:43:16.916Z,1520671396.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:43:17.337Z,1520671397.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:43:17.729Z,1520671397.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:43:18.130Z,1520671398.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:43:18.518Z,1520671398.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:43:18.918Z,1520671398.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:43:19.327Z,1520671399.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:43:19.730Z,1520671399.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:43:20.130Z,1520671400.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:43:20.522Z,1520671400.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:43:20.925Z,1520671400.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:43:21.326Z,1520671401.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:43:21.727Z,1520671401.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:43:22.129Z,1520671402.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:43:22.522Z,1520671402.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:43:22.921Z,1520671402.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:43:23.325Z,1520671403.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:43:23.728Z,1520671403.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:43:24.127Z,1520671404.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:43:24.519Z,1520671404.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:43:24.925Z,1520671404.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:43:25.332Z,1520671405.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:43:25.737Z,1520671405.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:43:26.131Z,1520671406.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:43:26.558Z,1520671406.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:43:26.919Z,1520671406.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:43:27.332Z,1520671407.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:43:27.732Z,1520671407.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:43:28.133Z,1520671408.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:43:28.523Z,1520671408.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:43:28.922Z,1520671408.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:43:29.333Z,1520671409.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:43:29.732Z,1520671409.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:43:30.133Z,1520671410.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:43:30.523Z,1520671410.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:43:30.924Z,1520671410.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:43:31.340Z,1520671411.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:43:31.741Z,1520671411.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:43:32.164Z,1520671412.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:43:32.517Z,1520671412.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:43:32.925Z,1520671412.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:43:33.326Z,1520671413.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:43:33.741Z,1520671413.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:43:34.127Z,1520671414.127 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:43:34.127Z,1520671414.127 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 69
2018-03-10T08:43:34.127Z,1520671414.127 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-03-10T08:43:34.129Z,1520671414.129 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:43:34.129Z,1520671414.129 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 69
2018-03-10T08:43:34.129Z,1520671414.129 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-03-10T08:43:34.131Z,1520671414.131 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:43:34.131Z,1520671414.131 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 69
2018-03-10T08:43:34.131Z,1520671414.131 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-10T08:43:34.143Z,1520671414.143 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-03-10T08:43:34.144Z,1520671414.144 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-03-10T08:43:34.144Z,1520671414.144 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-10T08:43:34.533Z,1520671414.533 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-03-10T08:43:34.533Z,1520671414.533 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 69
2018-03-10T08:43:34.534Z,1520671414.534 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-03-10T08:43:34.534Z,1520671414.534 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 69
2018-03-10T08:43:34.534Z,1520671414.534 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-10T08:43:34.534Z,1520671414.534 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 69
2018-03-10T08:43:34.931Z,1520671414.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-03-10T08:43:34.931Z,1520671414.931 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-03-10T08:43:34.932Z,1520671414.932 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-03-10T08:43:34.932Z,1520671414.932 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-03-10T08:43:34.932Z,1520671414.932 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-03-10T08:43:34.933Z,1520671414.933 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-03-10T08:43:34.933Z,1520671414.933 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-10T08:43:34.933Z,1520671414.933 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-10T08:43:34.934Z,1520671414.934 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-10T08:43:35.332Z,1520671415.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-03-10T08:43:35.333Z,1520671415.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:43:35.731Z,1520671415.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-03-10T08:43:35.732Z,1520671415.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:43:36.136Z,1520671416.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-03-10T08:43:36.137Z,1520671416.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:43:36.522Z,1520671416.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-03-10T08:43:36.523Z,1520671416.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:43:36.923Z,1520671416.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-03-10T08:43:36.924Z,1520671416.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:43:37.334Z,1520671417.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-03-10T08:43:37.335Z,1520671417.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:43:37.730Z,1520671417.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-03-10T08:43:37.731Z,1520671417.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:43:38.132Z,1520671418.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-03-10T08:43:38.133Z,1520671418.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:43:38.525Z,1520671418.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-03-10T08:43:38.526Z,1520671418.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:43:38.929Z,1520671418.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-03-10T08:43:38.930Z,1520671418.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:43:39.344Z,1520671419.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-03-10T08:43:39.345Z,1520671419.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:43:39.734Z,1520671419.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-03-10T08:43:39.735Z,1520671419.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:43:40.132Z,1520671420.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-03-10T08:43:40.133Z,1520671420.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:43:40.524Z,1520671420.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-03-10T08:43:40.525Z,1520671420.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:43:40.933Z,1520671420.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-03-10T08:43:40.934Z,1520671420.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:43:41.332Z,1520671421.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-03-10T08:43:41.333Z,1520671421.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:43:41.740Z,1520671421.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-03-10T08:43:41.741Z,1520671421.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:43:42.136Z,1520671422.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-03-10T08:43:42.137Z,1520671422.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:43:42.512Z,1520671422.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-03-10T08:43:42.513Z,1520671422.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:43:42.940Z,1520671422.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-03-10T08:43:42.941Z,1520671422.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:43:43.342Z,1520671423.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-03-10T08:43:43.343Z,1520671423.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:43:43.737Z,1520671423.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-03-10T08:43:43.738Z,1520671423.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:43:44.135Z,1520671424.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-03-10T08:43:44.136Z,1520671424.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:43:44.516Z,1520671424.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-03-10T08:43:44.517Z,1520671424.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:43:44.915Z,1520671424.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-03-10T08:43:44.916Z,1520671424.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:43:45.322Z,1520671425.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-03-10T08:43:45.335Z,1520671425.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:43:45.746Z,1520671425.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-03-10T08:43:45.747Z,1520671425.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:43:46.118Z,1520671426.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-03-10T08:43:46.119Z,1520671426.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:43:46.520Z,1520671426.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-03-10T08:43:46.521Z,1520671426.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:43:46.916Z,1520671426.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-03-10T08:43:46.917Z,1520671426.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:43:47.326Z,1520671427.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-03-10T08:43:47.343Z,1520671427.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:43:47.750Z,1520671427.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-03-10T08:43:47.751Z,1520671427.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:43:48.124Z,1520671428.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-03-10T08:43:48.125Z,1520671428.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:43:48.517Z,1520671428.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-03-10T08:43:48.518Z,1520671428.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:43:48.914Z,1520671428.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-03-10T08:43:48.915Z,1520671428.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:43:49.328Z,1520671429.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-03-10T08:43:49.329Z,1520671429.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:43:49.718Z,1520671429.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-03-10T08:43:49.719Z,1520671429.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:43:50.130Z,1520671430.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-03-10T08:43:50.147Z,1520671430.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:43:50.521Z,1520671430.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-03-10T08:43:50.522Z,1520671430.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:43:50.919Z,1520671430.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-03-10T08:43:50.920Z,1520671430.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:43:51.321Z,1520671431.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-03-10T08:43:51.322Z,1520671431.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:43:51.728Z,1520671431.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-03-10T08:43:51.729Z,1520671431.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:43:52.155Z,1520671432.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-03-10T08:43:52.156Z,1520671432.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:43:52.517Z,1520671432.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2018-03-10T08:43:52.518Z,1520671432.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:43:52.924Z,1520671432.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2018-03-10T08:43:52.925Z,1520671432.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:43:53.326Z,1520671433.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2018-03-10T08:43:53.327Z,1520671433.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:43:53.729Z,1520671433.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2018-03-10T08:43:53.730Z,1520671433.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:43:54.125Z,1520671434.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 20.0 s old, using for 20.0 s.
2018-03-10T08:43:54.126Z,1520671434.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:43:54.520Z,1520671434.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:43:54.925Z,1520671434.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:43:55.353Z,1520671435.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:43:55.726Z,1520671435.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:43:56.130Z,1520671436.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:43:56.521Z,1520671436.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:43:56.920Z,1520671436.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:43:57.326Z,1520671437.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:43:57.726Z,1520671437.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:44:00.856Z,1520671440.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:44:00.989Z,1520671440.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:44:01.331Z,1520671441.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:44:01.730Z,1520671441.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:44:02.131Z,1520671442.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:44:02.556Z,1520671442.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:44:02.934Z,1520671442.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:44:03.358Z,1520671443.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:44:03.730Z,1520671443.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:44:04.137Z,1520671444.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:44:04.560Z,1520671444.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:44:04.933Z,1520671444.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:44:05.339Z,1520671445.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:44:05.744Z,1520671445.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:44:06.164Z,1520671446.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:44:06.541Z,1520671446.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:44:06.926Z,1520671446.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:44:07.341Z,1520671447.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:44:07.736Z,1520671447.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:44:08.134Z,1520671448.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:44:08.539Z,1520671448.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:44:08.939Z,1520671448.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:44:09.345Z,1520671449.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:44:09.731Z,1520671449.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:44:10.125Z,1520671450.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:44:10.533Z,1520671450.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:44:10.933Z,1520671450.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:44:11.338Z,1520671451.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:44:11.741Z,1520671451.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:44:12.137Z,1520671452.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:44:12.533Z,1520671452.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:44:12.933Z,1520671452.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:44:13.337Z,1520671453.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:44:13.739Z,1520671453.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:44:14.145Z,1520671454.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:44:14.533Z,1520671454.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:44:14.932Z,1520671454.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:44:15.337Z,1520671455.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:44:15.745Z,1520671455.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:44:16.138Z,1520671456.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:44:16.540Z,1520671456.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:44:16.949Z,1520671456.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:44:17.339Z,1520671457.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:44:17.748Z,1520671457.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:44:18.157Z,1520671458.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:44:18.533Z,1520671458.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:44:18.932Z,1520671458.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:44:19.345Z,1520671459.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:44:19.746Z,1520671459.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:44:20.145Z,1520671460.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:44:20.531Z,1520671460.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:44:20.928Z,1520671460.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:44:21.345Z,1520671461.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:44:21.749Z,1520671461.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:44:22.143Z,1520671462.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:44:22.533Z,1520671462.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:44:22.935Z,1520671462.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:44:23.344Z,1520671463.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:44:23.753Z,1520671463.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:44:24.138Z,1520671464.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:44:24.532Z,1520671464.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:44:24.937Z,1520671464.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:44:25.349Z,1520671465.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:44:25.752Z,1520671465.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:44:26.149Z,1520671466.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:44:26.534Z,1520671466.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:44:26.932Z,1520671466.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:44:27.338Z,1520671467.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:44:27.749Z,1520671467.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:44:28.143Z,1520671468.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:44:28.533Z,1520671468.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:44:28.940Z,1520671468.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:44:29.362Z,1520671469.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:44:29.764Z,1520671469.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:44:30.149Z,1520671470.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:44:30.537Z,1520671470.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:44:30.933Z,1520671470.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:44:31.338Z,1520671471.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:44:31.743Z,1520671471.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:44:32.144Z,1520671472.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:44:32.535Z,1520671472.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:44:32.944Z,1520671472.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:44:33.349Z,1520671473.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:44:33.688Z,1520671473.688 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-03-10T08:44:33.689Z,1520671473.689 [NAL9602] Data Fault, FailCount= 5
2018-03-10T08:44:33.689Z,1520671473.689 [NAL9602](ERROR): Data Fault
2018-03-10T08:44:33.741Z,1520671473.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:44:33.762Z,1520671473.762 [CBIT](ERROR): Data Fault in component: NAL9602
2018-03-10T08:44:33.762Z,1520671473.762 [CBIT](CRITICAL): Data Fault in component: NAL9602
2018-03-10T08:44:34.092Z,1520671474.092 [NAL9602](INFO): Powering down
2018-03-10T08:44:34.145Z,1520671474.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:44:34.157Z,1520671474.157 [CBIT](INFO): Critical error at 20180310T084433
2018-03-10T08:44:34.517Z,1520671474.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:44:34.941Z,1520671474.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:44:35.323Z,1520671475.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:44:35.714Z,1520671475.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:44:36.145Z,1520671476.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:44:36.524Z,1520671476.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:44:36.920Z,1520671476.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:44:37.349Z,1520671477.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:44:37.721Z,1520671477.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:44:38.130Z,1520671478.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:44:38.533Z,1520671478.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:44:38.925Z,1520671478.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:44:39.325Z,1520671479.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:44:39.734Z,1520671479.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:44:40.126Z,1520671480.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:44:40.534Z,1520671480.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:44:40.955Z,1520671480.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:44:41.334Z,1520671481.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:44:41.741Z,1520671481.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:44:42.130Z,1520671482.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:44:42.530Z,1520671482.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:44:42.933Z,1520671482.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:44:43.331Z,1520671483.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:44:43.731Z,1520671483.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:44:44.131Z,1520671484.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:44:44.532Z,1520671484.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:44:44.930Z,1520671484.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:44:45.332Z,1520671485.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:44:45.733Z,1520671485.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:44:46.131Z,1520671486.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:44:46.528Z,1520671486.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:44:46.934Z,1520671486.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:44:47.333Z,1520671487.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:44:47.732Z,1520671487.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:44:48.132Z,1520671488.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:44:48.527Z,1520671488.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:44:48.932Z,1520671488.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:44:49.329Z,1520671489.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:44:49.732Z,1520671489.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:44:50.127Z,1520671490.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:44:50.526Z,1520671490.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:44:50.937Z,1520671490.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:44:51.332Z,1520671491.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:44:51.730Z,1520671491.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:44:52.133Z,1520671492.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:44:52.545Z,1520671492.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:44:52.930Z,1520671492.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:44:53.327Z,1520671493.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:44:53.731Z,1520671493.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:44:54.136Z,1520671494.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:44:54.533Z,1520671494.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:44:54.930Z,1520671494.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:44:55.330Z,1520671495.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:44:55.730Z,1520671495.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:44:56.132Z,1520671496.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:44:56.532Z,1520671496.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:44:56.931Z,1520671496.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:44:57.330Z,1520671497.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:44:57.726Z,1520671497.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:45:00.833Z,1520671500.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:45:00.972Z,1520671500.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:45:01.318Z,1520671501.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:45:01.697Z,1520671501.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:45:02.119Z,1520671502.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:45:02.497Z,1520671502.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:45:02.900Z,1520671502.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:45:03.299Z,1520671503.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:45:03.706Z,1520671503.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:45:04.133Z,1520671504.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:45:04.496Z,1520671504.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:45:04.899Z,1520671504.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:45:05.299Z,1520671505.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:45:05.701Z,1520671505.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:45:06.099Z,1520671506.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:45:06.501Z,1520671506.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:45:06.903Z,1520671506.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:45:07.309Z,1520671507.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:45:07.734Z,1520671507.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:45:08.100Z,1520671508.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:45:08.500Z,1520671508.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:45:08.901Z,1520671508.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:45:09.304Z,1520671509.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:45:09.703Z,1520671509.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:45:10.105Z,1520671510.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:45:10.497Z,1520671510.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:45:10.900Z,1520671510.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:45:11.305Z,1520671511.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:45:11.702Z,1520671511.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:45:12.104Z,1520671512.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:45:12.506Z,1520671512.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:45:12.904Z,1520671512.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:45:13.300Z,1520671513.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:45:13.702Z,1520671513.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:45:14.104Z,1520671514.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:45:14.503Z,1520671514.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:45:14.911Z,1520671514.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:45:15.336Z,1520671515.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:45:15.702Z,1520671515.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:45:16.105Z,1520671516.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:45:16.502Z,1520671516.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:45:16.902Z,1520671516.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:45:17.306Z,1520671517.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:45:17.704Z,1520671517.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:45:18.102Z,1520671518.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:45:18.505Z,1520671518.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:45:18.905Z,1520671518.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:45:19.303Z,1520671519.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:45:19.712Z,1520671519.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:45:20.139Z,1520671520.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:45:20.512Z,1520671520.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:45:20.906Z,1520671520.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:45:21.303Z,1520671521.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:45:21.712Z,1520671521.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:45:22.106Z,1520671522.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:45:22.505Z,1520671522.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:45:22.910Z,1520671522.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:45:23.310Z,1520671523.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:45:23.704Z,1520671523.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:45:24.113Z,1520671524.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:45:24.506Z,1520671524.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:45:24.904Z,1520671524.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:45:25.309Z,1520671525.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:45:25.709Z,1520671525.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:45:26.109Z,1520671526.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:45:26.513Z,1520671526.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:45:26.904Z,1520671526.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:45:27.302Z,1520671527.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:45:27.717Z,1520671527.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:45:27.761Z,1520671527.761 [CBIT](DEBUG): EFC running - data check-sum false
2018-03-10T08:45:28.102Z,1520671528.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:45:28.504Z,1520671528.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:45:28.906Z,1520671528.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:45:29.306Z,1520671529.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:45:29.704Z,1520671529.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:45:30.115Z,1520671530.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:45:30.508Z,1520671530.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:45:30.906Z,1520671530.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:45:31.302Z,1520671531.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:45:31.710Z,1520671531.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:45:32.121Z,1520671532.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:45:32.512Z,1520671532.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:45:32.906Z,1520671532.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:45:33.307Z,1520671533.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:45:33.703Z,1520671533.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:45:34.106Z,1520671534.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:45:34.506Z,1520671534.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:45:34.902Z,1520671534.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:45:35.307Z,1520671535.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:45:35.703Z,1520671535.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:45:36.105Z,1520671536.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:45:36.507Z,1520671536.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:45:36.907Z,1520671536.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:45:37.310Z,1520671537.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:45:37.712Z,1520671537.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:45:38.125Z,1520671538.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:45:38.506Z,1520671538.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:45:38.918Z,1520671538.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:45:39.309Z,1520671539.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:45:39.708Z,1520671539.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:45:40.106Z,1520671540.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:45:40.508Z,1520671540.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:45:40.910Z,1520671540.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:45:41.312Z,1520671541.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:45:41.707Z,1520671541.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:45:42.108Z,1520671542.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:45:42.507Z,1520671542.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:45:42.906Z,1520671542.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:45:43.308Z,1520671543.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:45:43.706Z,1520671543.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:45:44.115Z,1520671544.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:45:44.509Z,1520671544.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:45:44.916Z,1520671544.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:45:45.317Z,1520671545.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:45:45.719Z,1520671545.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:45:46.133Z,1520671546.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:45:46.530Z,1520671546.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:45:46.911Z,1520671546.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:45:47.309Z,1520671547.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:45:47.711Z,1520671547.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:45:48.110Z,1520671548.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:45:48.536Z,1520671548.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:45:48.981Z,1520671548.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:45:49.324Z,1520671549.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:45:49.716Z,1520671549.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:45:50.114Z,1520671550.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:45:50.521Z,1520671550.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:45:50.919Z,1520671550.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:45:51.314Z,1520671551.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:45:51.714Z,1520671551.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:45:52.115Z,1520671552.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:45:52.498Z,1520671552.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:45:52.925Z,1520671552.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:45:53.303Z,1520671553.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:45:53.709Z,1520671553.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:45:54.100Z,1520671554.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:45:54.502Z,1520671554.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:45:54.904Z,1520671554.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:45:55.304Z,1520671555.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:45:55.710Z,1520671555.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:45:56.133Z,1520671556.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:45:56.505Z,1520671556.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:45:56.904Z,1520671556.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:45:56.907Z,1520671556.907 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-03-10T08:45:56.907Z,1520671556.907 [Default:CheckIn:C.Wait] Stopped
2018-03-10T08:45:56.907Z,1520671556.907 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-03-10T08:45:56.907Z,1520671556.907 [Default:CheckIn:D] Running Loop=1
2018-03-10T08:45:57.302Z,1520671557.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:45:57.306Z,1520671557.306 [Default:CheckIn:D] Stopped
2018-03-10T08:45:57.306Z,1520671557.306 [Default:CheckIn:E] Running Loop=1
2018-03-10T08:45:57.713Z,1520671557.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:45:57.716Z,1520671557.716 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 206.656413 min 
2018-03-10T08:45:57.716Z,1520671557.716 [Default:CheckIn:E] Stopped
2018-03-10T08:45:57.717Z,1520671557.717 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-03-10T08:45:57.717Z,1520671557.717 [Default:CheckIn] Stopped
2018-03-10T08:45:57.717Z,1520671557.717 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-03-10T08:45:57.717Z,1520671557.717 [Default:CheckIn](INFO): Running loop #21
2018-03-10T08:45:57.717Z,1520671557.717 [Default:CheckIn] Running Loop=21
2018-03-10T08:45:57.717Z,1520671557.717 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-03-10T08:45:57.717Z,1520671557.717 [Default:CheckIn:Read_GPS] Running Loop=1
2018-03-10T08:45:58.105Z,1520671558.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:46:01.250Z,1520671561.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:46:01.413Z,1520671561.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:46:01.719Z,1520671561.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:46:02.121Z,1520671562.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:46:02.525Z,1520671562.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:46:02.922Z,1520671562.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:46:03.317Z,1520671563.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:46:03.714Z,1520671563.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:46:04.117Z,1520671564.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:46:04.520Z,1520671564.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:46:04.921Z,1520671564.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:46:05.324Z,1520671565.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:46:05.713Z,1520671565.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:46:06.120Z,1520671566.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:46:06.524Z,1520671566.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:46:06.915Z,1520671566.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:46:07.321Z,1520671567.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:46:07.724Z,1520671567.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:46:08.122Z,1520671568.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:46:08.521Z,1520671568.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:46:08.919Z,1520671568.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:46:09.319Z,1520671569.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:46:09.719Z,1520671569.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:46:10.130Z,1520671570.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:46:10.523Z,1520671570.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:46:10.923Z,1520671570.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:46:11.321Z,1520671571.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:46:11.722Z,1520671571.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:46:12.125Z,1520671572.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:46:12.530Z,1520671572.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:46:12.929Z,1520671572.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:46:13.322Z,1520671573.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:46:13.732Z,1520671573.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:46:14.133Z,1520671574.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:46:14.523Z,1520671574.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:46:14.924Z,1520671574.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:46:15.322Z,1520671575.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:46:15.722Z,1520671575.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:46:16.124Z,1520671576.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:46:16.519Z,1520671576.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:46:16.918Z,1520671576.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:46:17.321Z,1520671577.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:46:17.719Z,1520671577.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:46:18.122Z,1520671578.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:46:18.524Z,1520671578.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:46:18.916Z,1520671578.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:46:19.322Z,1520671579.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:46:19.724Z,1520671579.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:46:20.122Z,1520671580.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:46:20.519Z,1520671580.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:46:20.929Z,1520671580.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:46:21.322Z,1520671581.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:46:21.727Z,1520671581.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:46:22.117Z,1520671582.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:46:22.524Z,1520671582.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:46:22.923Z,1520671582.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:46:23.318Z,1520671583.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:46:23.719Z,1520671583.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:46:24.126Z,1520671584.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:46:24.540Z,1520671584.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:46:24.922Z,1520671584.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:46:25.329Z,1520671585.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:46:25.728Z,1520671585.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:46:26.129Z,1520671586.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:46:26.528Z,1520671586.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:46:26.927Z,1520671586.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:46:27.322Z,1520671587.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:46:27.723Z,1520671587.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:46:28.126Z,1520671588.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:46:28.520Z,1520671588.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:46:28.923Z,1520671588.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:46:29.327Z,1520671589.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:46:29.719Z,1520671589.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:46:30.123Z,1520671590.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:46:30.527Z,1520671590.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:46:30.919Z,1520671590.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:46:31.329Z,1520671591.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:46:31.721Z,1520671591.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:46:32.125Z,1520671592.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:46:32.523Z,1520671592.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:46:32.926Z,1520671592.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:46:33.322Z,1520671593.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:46:33.727Z,1520671593.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:46:33.740Z,1520671593.740 [CBIT](INFO): Clearing failed state for component NAL9602
2018-03-10T08:46:33.740Z,1520671593.740 [NAL9602] No Fault, FailCount= 5
2018-03-10T08:46:34.080Z,1520671594.080 [NAL9602](INFO): Powering up NAL9602
2018-03-10T08:46:34.135Z,1520671594.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:46:34.528Z,1520671594.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:46:34.924Z,1520671594.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:46:35.333Z,1520671595.333 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:46:35.333Z,1520671595.333 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 70
2018-03-10T08:46:35.333Z,1520671595.333 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-03-10T08:46:35.335Z,1520671595.335 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:46:35.335Z,1520671595.335 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 70
2018-03-10T08:46:35.335Z,1520671595.335 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-03-10T08:46:35.337Z,1520671595.337 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:46:35.337Z,1520671595.337 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 70
2018-03-10T08:46:35.337Z,1520671595.337 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-10T08:46:35.348Z,1520671595.348 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-03-10T08:46:35.348Z,1520671595.348 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-03-10T08:46:35.349Z,1520671595.349 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-10T08:46:35.755Z,1520671595.755 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-03-10T08:46:35.755Z,1520671595.755 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 70
2018-03-10T08:46:35.755Z,1520671595.755 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-03-10T08:46:35.755Z,1520671595.755 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 70
2018-03-10T08:46:35.756Z,1520671595.756 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-10T08:46:35.756Z,1520671595.756 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 70
2018-03-10T08:46:36.131Z,1520671596.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-03-10T08:46:36.131Z,1520671596.131 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-03-10T08:46:36.132Z,1520671596.132 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-03-10T08:46:36.132Z,1520671596.132 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-03-10T08:46:36.132Z,1520671596.132 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-03-10T08:46:36.133Z,1520671596.133 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-03-10T08:46:36.133Z,1520671596.133 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-10T08:46:36.133Z,1520671596.133 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-10T08:46:36.134Z,1520671596.134 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-10T08:46:36.532Z,1520671596.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-03-10T08:46:36.533Z,1520671596.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:46:36.926Z,1520671596.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-03-10T08:46:36.927Z,1520671596.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:46:37.337Z,1520671597.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-03-10T08:46:37.338Z,1520671597.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:46:37.717Z,1520671597.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-03-10T08:46:37.718Z,1520671597.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:46:38.122Z,1520671598.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-03-10T08:46:38.147Z,1520671598.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:46:38.552Z,1520671598.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-03-10T08:46:38.553Z,1520671598.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:46:38.917Z,1520671598.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-03-10T08:46:38.918Z,1520671598.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:46:39.317Z,1520671599.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-03-10T08:46:39.318Z,1520671599.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:46:39.724Z,1520671599.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-03-10T08:46:39.725Z,1520671599.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:46:40.131Z,1520671600.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-03-10T08:46:40.132Z,1520671600.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:46:40.526Z,1520671600.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-03-10T08:46:40.527Z,1520671600.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:46:40.921Z,1520671600.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-03-10T08:46:40.922Z,1520671600.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:46:41.327Z,1520671601.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-03-10T08:46:41.328Z,1520671601.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:46:41.725Z,1520671601.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-03-10T08:46:41.726Z,1520671601.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:46:42.125Z,1520671602.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-03-10T08:46:42.126Z,1520671602.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:46:42.528Z,1520671602.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-03-10T08:46:42.528Z,1520671602.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:46:42.925Z,1520671602.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-03-10T08:46:42.926Z,1520671602.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:46:43.323Z,1520671603.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-03-10T08:46:43.324Z,1520671603.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:46:43.728Z,1520671603.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-03-10T08:46:43.728Z,1520671603.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:46:44.118Z,1520671604.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-03-10T08:46:44.119Z,1520671604.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:46:44.521Z,1520671604.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-03-10T08:46:44.522Z,1520671604.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:46:44.934Z,1520671604.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-03-10T08:46:44.935Z,1520671604.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:46:45.276Z,1520671605.276 [NAL9602](INFO): NAL9602 initialized
2018-03-10T08:46:45.328Z,1520671605.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-03-10T08:46:45.329Z,1520671605.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:46:45.728Z,1520671605.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-03-10T08:46:45.729Z,1520671605.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:46:46.135Z,1520671606.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-03-10T08:46:46.136Z,1520671606.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:46:46.534Z,1520671606.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-03-10T08:46:46.535Z,1520671606.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:46:46.932Z,1520671606.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-03-10T08:46:46.933Z,1520671606.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:46:47.340Z,1520671607.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-03-10T08:46:47.341Z,1520671607.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:46:47.738Z,1520671607.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-03-10T08:46:47.739Z,1520671607.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:46:48.134Z,1520671608.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-03-10T08:46:48.135Z,1520671608.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:46:48.538Z,1520671608.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-03-10T08:46:48.539Z,1520671608.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:46:48.928Z,1520671608.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-03-10T08:46:48.929Z,1520671608.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:46:49.323Z,1520671609.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-03-10T08:46:49.324Z,1520671609.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:46:49.744Z,1520671609.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-03-10T08:46:49.745Z,1520671609.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:46:50.134Z,1520671610.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-03-10T08:46:50.135Z,1520671610.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:46:50.533Z,1520671610.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-03-10T08:46:50.534Z,1520671610.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:46:50.932Z,1520671610.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-03-10T08:46:50.933Z,1520671610.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:46:51.326Z,1520671611.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-03-10T08:46:51.327Z,1520671611.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:46:51.734Z,1520671611.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-03-10T08:46:51.739Z,1520671611.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:46:52.136Z,1520671612.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-03-10T08:46:52.137Z,1520671612.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:46:52.539Z,1520671612.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-03-10T08:46:52.540Z,1520671612.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:46:52.928Z,1520671612.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-03-10T08:46:52.929Z,1520671612.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:46:53.312Z,1520671613.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-03-10T08:46:53.313Z,1520671613.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:46:53.738Z,1520671613.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2018-03-10T08:46:53.739Z,1520671613.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:46:54.141Z,1520671614.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2018-03-10T08:46:54.142Z,1520671614.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:46:54.543Z,1520671614.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2018-03-10T08:46:54.544Z,1520671614.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:46:54.913Z,1520671614.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2018-03-10T08:46:54.913Z,1520671614.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:46:55.317Z,1520671615.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 20.0 s old, using for 20.0 s.
2018-03-10T08:46:55.318Z,1520671615.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:46:55.749Z,1520671615.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:46:56.140Z,1520671616.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:46:56.537Z,1520671616.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:46:56.941Z,1520671616.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:46:57.325Z,1520671617.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:46:57.730Z,1520671617.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:46:58.164Z,1520671618.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:47:01.257Z,1520671621.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:47:01.397Z,1520671621.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:47:01.732Z,1520671621.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:47:02.130Z,1520671622.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:47:02.537Z,1520671622.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:47:02.966Z,1520671622.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:47:03.364Z,1520671623.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:47:03.756Z,1520671623.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:47:04.132Z,1520671624.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:47:04.529Z,1520671624.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:47:04.925Z,1520671624.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:47:05.329Z,1520671625.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:47:05.758Z,1520671625.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:47:06.138Z,1520671626.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:47:06.557Z,1520671626.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:47:06.930Z,1520671626.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:47:07.328Z,1520671627.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:47:07.757Z,1520671627.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:47:08.137Z,1520671628.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:47:08.558Z,1520671628.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:47:08.930Z,1520671628.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:47:09.333Z,1520671629.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:47:09.756Z,1520671629.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:47:10.135Z,1520671630.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:47:10.558Z,1520671630.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:47:10.930Z,1520671630.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:47:11.330Z,1520671631.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:47:11.765Z,1520671631.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:47:12.158Z,1520671632.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:47:12.534Z,1520671632.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:47:12.930Z,1520671632.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:47:13.328Z,1520671633.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:47:13.756Z,1520671633.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:47:14.158Z,1520671634.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:47:14.530Z,1520671634.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:47:14.931Z,1520671634.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:47:15.336Z,1520671635.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:47:15.757Z,1520671635.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:47:16.142Z,1520671636.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:47:16.535Z,1520671636.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:47:16.934Z,1520671636.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:47:17.333Z,1520671637.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:47:17.736Z,1520671637.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:47:18.138Z,1520671638.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:47:18.546Z,1520671638.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:47:18.935Z,1520671638.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:47:19.328Z,1520671639.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:47:19.740Z,1520671639.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:47:20.145Z,1520671640.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:47:20.539Z,1520671640.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:47:20.931Z,1520671640.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:47:21.329Z,1520671641.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:47:21.736Z,1520671641.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:47:22.142Z,1520671642.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:47:22.540Z,1520671642.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:47:22.928Z,1520671642.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:47:23.334Z,1520671643.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:47:23.769Z,1520671643.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:47:24.141Z,1520671644.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:47:24.548Z,1520671644.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:47:24.937Z,1520671644.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:47:25.333Z,1520671645.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:47:25.741Z,1520671645.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:47:26.145Z,1520671646.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:47:26.542Z,1520671646.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:47:26.934Z,1520671646.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:47:27.337Z,1520671647.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:47:27.738Z,1520671647.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:47:28.153Z,1520671648.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:47:28.557Z,1520671648.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:47:28.927Z,1520671648.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:47:29.330Z,1520671649.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:47:29.742Z,1520671649.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:47:30.138Z,1520671650.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:47:30.542Z,1520671650.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:47:30.933Z,1520671650.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:47:31.326Z,1520671651.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:47:31.747Z,1520671651.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:47:32.145Z,1520671652.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:47:32.542Z,1520671652.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:47:32.931Z,1520671652.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:47:33.333Z,1520671653.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:47:33.738Z,1520671653.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:47:34.143Z,1520671654.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:47:34.548Z,1520671654.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:47:34.935Z,1520671654.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:47:35.330Z,1520671655.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:47:35.743Z,1520671655.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:47:36.139Z,1520671656.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:47:36.549Z,1520671656.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:47:36.936Z,1520671656.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:47:37.331Z,1520671657.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:47:37.746Z,1520671657.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:47:38.147Z,1520671658.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:47:38.541Z,1520671658.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:47:38.935Z,1520671658.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:47:39.335Z,1520671659.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:47:39.738Z,1520671659.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:47:40.147Z,1520671660.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:47:40.549Z,1520671660.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:47:40.948Z,1520671660.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:47:41.339Z,1520671661.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:47:41.743Z,1520671661.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:47:42.142Z,1520671662.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:47:42.553Z,1520671662.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:47:42.942Z,1520671662.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:47:43.320Z,1520671663.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:47:43.749Z,1520671663.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:47:44.150Z,1520671664.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:47:44.547Z,1520671664.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:47:44.948Z,1520671664.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:47:45.369Z,1520671665.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:47:45.758Z,1520671665.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:47:46.161Z,1520671666.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:47:46.565Z,1520671666.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:47:46.928Z,1520671666.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:47:47.336Z,1520671667.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:47:47.732Z,1520671667.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:47:48.141Z,1520671668.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:47:48.564Z,1520671668.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:47:48.930Z,1520671668.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:47:49.333Z,1520671669.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:47:49.765Z,1520671669.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:47:50.139Z,1520671670.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:47:50.537Z,1520671670.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:47:50.940Z,1520671670.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:47:51.330Z,1520671671.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:47:51.737Z,1520671671.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:47:52.144Z,1520671672.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:47:52.545Z,1520671672.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:47:52.938Z,1520671672.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:47:53.341Z,1520671673.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:47:53.745Z,1520671673.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:47:54.138Z,1520671674.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:47:54.544Z,1520671674.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:47:54.934Z,1520671674.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:47:55.338Z,1520671675.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:47:55.741Z,1520671675.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:47:56.138Z,1520671676.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:47:56.544Z,1520671676.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:47:56.952Z,1520671676.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:47:57.341Z,1520671677.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:47:57.745Z,1520671677.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:47:58.148Z,1520671678.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:48:01.239Z,1520671681.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:48:01.376Z,1520671681.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:48:01.727Z,1520671681.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:48:02.104Z,1520671682.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:48:02.505Z,1520671682.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:48:02.927Z,1520671682.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:48:03.336Z,1520671683.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:48:03.730Z,1520671683.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:48:04.105Z,1520671684.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:48:04.533Z,1520671684.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:48:04.933Z,1520671684.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:48:05.310Z,1520671685.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:48:05.740Z,1520671685.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:48:06.114Z,1520671686.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:48:06.518Z,1520671686.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:48:06.910Z,1520671686.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:48:07.309Z,1520671687.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:48:07.744Z,1520671687.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:48:08.144Z,1520671688.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:48:08.518Z,1520671688.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:48:08.917Z,1520671688.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:48:09.311Z,1520671689.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:48:09.718Z,1520671689.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:48:10.118Z,1520671690.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:48:10.524Z,1520671690.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:48:10.913Z,1520671690.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:48:11.311Z,1520671691.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:48:11.718Z,1520671691.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:48:12.118Z,1520671692.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:48:12.518Z,1520671692.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:48:12.913Z,1520671692.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:48:13.308Z,1520671693.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:48:13.725Z,1520671693.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:48:14.118Z,1520671694.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:48:14.525Z,1520671694.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:48:14.913Z,1520671694.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:48:15.313Z,1520671695.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:48:15.720Z,1520671695.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:48:16.118Z,1520671696.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:48:16.518Z,1520671696.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:48:16.910Z,1520671696.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:48:17.308Z,1520671697.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:48:17.753Z,1520671697.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:48:18.145Z,1520671698.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:48:18.519Z,1520671698.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:48:18.918Z,1520671698.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:48:19.329Z,1520671699.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:48:19.721Z,1520671699.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:48:20.121Z,1520671700.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:48:20.522Z,1520671700.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:48:20.917Z,1520671700.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:48:21.313Z,1520671701.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:48:21.721Z,1520671701.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:48:22.121Z,1520671702.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:48:22.521Z,1520671702.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:48:22.914Z,1520671702.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:48:23.313Z,1520671703.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:48:23.718Z,1520671703.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:48:24.122Z,1520671704.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:48:24.525Z,1520671704.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:48:24.913Z,1520671704.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:48:25.323Z,1520671705.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:48:25.745Z,1520671705.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:48:26.136Z,1520671706.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:48:26.522Z,1520671706.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:48:26.905Z,1520671706.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:48:27.307Z,1520671707.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:48:27.726Z,1520671707.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:48:28.130Z,1520671708.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:48:28.527Z,1520671708.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:48:28.929Z,1520671708.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:48:29.305Z,1520671709.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:48:29.730Z,1520671709.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:48:30.135Z,1520671710.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:48:30.549Z,1520671710.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:48:30.925Z,1520671710.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:48:31.314Z,1520671711.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:48:31.718Z,1520671711.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:48:32.119Z,1520671712.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:48:32.519Z,1520671712.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:48:32.915Z,1520671712.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:48:33.314Z,1520671713.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:48:33.725Z,1520671713.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:48:34.120Z,1520671714.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:48:34.519Z,1520671714.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:48:34.914Z,1520671714.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:48:35.308Z,1520671715.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:48:35.719Z,1520671715.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:48:36.118Z,1520671716.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:48:36.517Z,1520671716.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:48:36.913Z,1520671716.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:48:37.312Z,1520671717.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:48:37.745Z,1520671717.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:48:38.124Z,1520671718.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:48:38.525Z,1520671718.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:48:38.913Z,1520671718.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:48:39.308Z,1520671719.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:48:39.718Z,1520671719.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:48:40.118Z,1520671720.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:48:40.524Z,1520671720.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:48:40.913Z,1520671720.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:48:41.312Z,1520671721.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:48:41.719Z,1520671721.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:48:42.118Z,1520671722.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:48:42.518Z,1520671722.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:48:42.919Z,1520671722.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:48:43.325Z,1520671723.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:48:43.718Z,1520671723.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:48:44.118Z,1520671724.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:48:44.518Z,1520671724.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:48:44.913Z,1520671724.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:48:45.309Z,1520671725.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:48:45.717Z,1520671725.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:48:46.121Z,1520671726.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:48:46.519Z,1520671726.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:48:46.910Z,1520671726.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:48:47.315Z,1520671727.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:48:47.718Z,1520671727.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:48:48.118Z,1520671728.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:48:48.517Z,1520671728.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:48:48.913Z,1520671728.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:48:49.319Z,1520671729.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:48:49.752Z,1520671729.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:48:50.122Z,1520671730.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:48:50.529Z,1520671730.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:48:50.914Z,1520671730.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:48:51.316Z,1520671731.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:48:51.722Z,1520671731.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:48:52.129Z,1520671732.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:48:52.528Z,1520671732.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:48:52.917Z,1520671732.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:48:53.312Z,1520671733.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:48:53.722Z,1520671733.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:48:54.121Z,1520671734.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:48:54.522Z,1520671734.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:48:54.910Z,1520671734.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:48:55.311Z,1520671735.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:48:55.724Z,1520671735.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:48:56.156Z,1520671736.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:48:56.522Z,1520671736.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:48:56.921Z,1520671736.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:48:57.313Z,1520671737.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:48:57.722Z,1520671737.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:48:58.122Z,1520671738.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:48:58.521Z,1520671738.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:49:01.626Z,1520671741.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:49:01.777Z,1520671741.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:49:02.130Z,1520671742.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:49:02.529Z,1520671742.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:49:02.930Z,1520671742.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:49:03.321Z,1520671743.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:49:03.721Z,1520671743.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:49:04.121Z,1520671744.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:49:04.517Z,1520671744.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:49:04.926Z,1520671744.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:49:05.333Z,1520671745.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:49:05.727Z,1520671745.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:49:06.121Z,1520671746.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:49:06.519Z,1520671746.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:49:06.917Z,1520671746.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:49:07.317Z,1520671747.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:49:07.726Z,1520671747.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:49:08.132Z,1520671748.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:49:08.561Z,1520671748.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:49:08.931Z,1520671748.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:49:09.322Z,1520671749.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:49:09.736Z,1520671749.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:49:10.134Z,1520671750.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:49:10.531Z,1520671750.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:49:10.924Z,1520671750.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:49:11.320Z,1520671751.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:49:11.741Z,1520671751.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:49:12.136Z,1520671752.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:49:12.531Z,1520671752.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:49:12.923Z,1520671752.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:49:13.323Z,1520671753.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:49:13.746Z,1520671753.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:49:14.149Z,1520671754.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:49:14.529Z,1520671754.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:49:14.918Z,1520671754.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:49:15.321Z,1520671755.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:49:15.732Z,1520671755.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:49:16.134Z,1520671756.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:49:16.541Z,1520671756.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:49:16.922Z,1520671756.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:49:17.313Z,1520671757.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:49:17.745Z,1520671757.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:49:18.137Z,1520671758.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:49:18.533Z,1520671758.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:49:18.940Z,1520671758.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:49:19.313Z,1520671759.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:49:19.738Z,1520671759.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:49:20.145Z,1520671760.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:49:20.553Z,1520671760.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:49:20.945Z,1520671760.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:49:21.332Z,1520671761.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:49:21.737Z,1520671761.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:49:22.134Z,1520671762.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:49:22.545Z,1520671762.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:49:22.918Z,1520671762.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:49:23.317Z,1520671763.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:49:23.725Z,1520671763.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:49:24.147Z,1520671764.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:49:24.523Z,1520671764.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:49:24.917Z,1520671764.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:49:25.320Z,1520671765.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:49:25.723Z,1520671765.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:49:26.129Z,1520671766.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:49:26.528Z,1520671766.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:49:26.937Z,1520671766.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:49:27.320Z,1520671767.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:49:27.726Z,1520671767.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:49:28.126Z,1520671768.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:49:28.526Z,1520671768.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:49:28.919Z,1520671768.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:49:29.316Z,1520671769.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:49:29.725Z,1520671769.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:49:30.126Z,1520671770.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:49:30.525Z,1520671770.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:49:30.923Z,1520671770.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:49:31.320Z,1520671771.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:49:31.725Z,1520671771.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:49:32.132Z,1520671772.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:49:32.525Z,1520671772.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:49:32.923Z,1520671772.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:49:33.353Z,1520671773.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:49:33.725Z,1520671773.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:49:34.129Z,1520671774.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:49:34.531Z,1520671774.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:49:34.923Z,1520671774.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:49:35.320Z,1520671775.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:49:35.737Z,1520671775.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:49:36.129Z,1520671776.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:49:36.530Z,1520671776.530 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:49:36.530Z,1520671776.530 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 71
2018-03-10T08:49:36.530Z,1520671776.530 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-03-10T08:49:36.532Z,1520671776.532 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:49:36.532Z,1520671776.532 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 71
2018-03-10T08:49:36.532Z,1520671776.532 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-03-10T08:49:36.534Z,1520671776.534 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:49:36.534Z,1520671776.534 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 71
2018-03-10T08:49:36.534Z,1520671776.534 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-10T08:49:36.566Z,1520671776.566 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-03-10T08:49:36.566Z,1520671776.566 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-03-10T08:49:36.566Z,1520671776.566 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-10T08:49:36.948Z,1520671776.948 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-03-10T08:49:36.948Z,1520671776.948 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 71
2018-03-10T08:49:36.948Z,1520671776.948 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-03-10T08:49:36.948Z,1520671776.948 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 71
2018-03-10T08:49:36.949Z,1520671776.949 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-10T08:49:36.949Z,1520671776.949 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 71
2018-03-10T08:49:37.320Z,1520671777.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-03-10T08:49:37.321Z,1520671777.321 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-03-10T08:49:37.321Z,1520671777.321 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-03-10T08:49:37.321Z,1520671777.321 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-03-10T08:49:37.322Z,1520671777.322 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-03-10T08:49:37.322Z,1520671777.322 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-03-10T08:49:37.323Z,1520671777.323 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-10T08:49:37.323Z,1520671777.323 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-10T08:49:37.323Z,1520671777.323 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-10T08:49:37.736Z,1520671777.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-03-10T08:49:37.737Z,1520671777.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:49:38.134Z,1520671778.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-03-10T08:49:38.135Z,1520671778.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:49:38.530Z,1520671778.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-03-10T08:49:38.535Z,1520671778.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:49:38.938Z,1520671778.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-03-10T08:49:38.938Z,1520671778.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:49:39.348Z,1520671779.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-03-10T08:49:39.349Z,1520671779.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:49:39.722Z,1520671779.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-03-10T08:49:39.735Z,1520671779.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:49:40.144Z,1520671780.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-03-10T08:49:40.145Z,1520671780.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:49:40.543Z,1520671780.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-03-10T08:49:40.544Z,1520671780.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:49:40.913Z,1520671780.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-03-10T08:49:40.914Z,1520671780.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:49:41.317Z,1520671781.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-03-10T08:49:41.317Z,1520671781.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:49:41.726Z,1520671781.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-03-10T08:49:41.743Z,1520671781.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:49:42.130Z,1520671782.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-03-10T08:49:42.151Z,1520671782.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:49:42.519Z,1520671782.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-03-10T08:49:42.520Z,1520671782.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:49:42.919Z,1520671782.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-03-10T08:49:42.920Z,1520671782.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:49:43.316Z,1520671783.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-03-10T08:49:43.317Z,1520671783.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:49:43.749Z,1520671783.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-03-10T08:49:43.750Z,1520671783.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:49:44.122Z,1520671784.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-03-10T08:49:44.123Z,1520671784.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:49:44.518Z,1520671784.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-03-10T08:49:44.520Z,1520671784.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:49:44.918Z,1520671784.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-03-10T08:49:44.919Z,1520671784.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:49:45.332Z,1520671785.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-03-10T08:49:45.333Z,1520671785.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:49:45.729Z,1520671785.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-03-10T08:49:45.730Z,1520671785.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:49:46.148Z,1520671786.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-03-10T08:49:46.149Z,1520671786.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:49:46.523Z,1520671786.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-03-10T08:49:46.524Z,1520671786.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:49:46.917Z,1520671786.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-03-10T08:49:46.918Z,1520671786.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:49:47.321Z,1520671787.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-03-10T08:49:47.322Z,1520671787.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:49:47.723Z,1520671787.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-03-10T08:49:47.724Z,1520671787.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:49:48.122Z,1520671788.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-03-10T08:49:48.123Z,1520671788.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:49:48.528Z,1520671788.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-03-10T08:49:48.529Z,1520671788.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:49:48.910Z,1520671788.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-03-10T08:49:48.911Z,1520671788.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:49:49.315Z,1520671789.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-03-10T08:49:49.316Z,1520671789.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:49:49.736Z,1520671789.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-03-10T08:49:49.737Z,1520671789.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:49:50.140Z,1520671790.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-03-10T08:49:50.141Z,1520671790.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:49:50.541Z,1520671790.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-03-10T08:49:50.542Z,1520671790.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:49:50.914Z,1520671790.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-03-10T08:49:50.916Z,1520671790.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:49:51.318Z,1520671791.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-03-10T08:49:51.320Z,1520671791.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:49:51.745Z,1520671791.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-03-10T08:49:51.746Z,1520671791.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:49:52.145Z,1520671792.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-03-10T08:49:52.146Z,1520671792.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:49:52.518Z,1520671792.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-03-10T08:49:52.519Z,1520671792.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:49:52.917Z,1520671792.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-03-10T08:49:52.918Z,1520671792.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:49:53.320Z,1520671793.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-03-10T08:49:53.321Z,1520671793.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:49:53.730Z,1520671793.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-03-10T08:49:53.755Z,1520671793.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:49:54.122Z,1520671794.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-03-10T08:49:54.123Z,1520671794.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:49:54.530Z,1520671794.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-03-10T08:49:54.551Z,1520671794.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:49:54.921Z,1520671794.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2018-03-10T08:49:54.922Z,1520671794.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:49:55.319Z,1520671795.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2018-03-10T08:49:55.320Z,1520671795.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:49:55.721Z,1520671795.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2018-03-10T08:49:55.722Z,1520671795.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:49:56.126Z,1520671796.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2018-03-10T08:49:56.127Z,1520671796.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:49:56.522Z,1520671796.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 20.0 s old, using for 20.0 s.
2018-03-10T08:49:56.524Z,1520671796.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:49:56.921Z,1520671796.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:49:57.326Z,1520671797.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:49:57.726Z,1520671797.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:49:58.126Z,1520671798.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:49:58.568Z,1520671798.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:50:01.657Z,1520671801.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:50:01.804Z,1520671801.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:50:02.160Z,1520671802.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:50:02.550Z,1520671802.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:50:02.950Z,1520671802.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:50:03.332Z,1520671803.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:50:03.730Z,1520671803.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:50:04.157Z,1520671804.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:50:04.537Z,1520671804.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:50:04.942Z,1520671804.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:50:05.338Z,1520671805.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:50:05.735Z,1520671805.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:50:06.131Z,1520671806.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:50:06.531Z,1520671806.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:50:06.925Z,1520671806.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:50:07.331Z,1520671807.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:50:07.735Z,1520671807.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:50:08.133Z,1520671808.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:50:08.534Z,1520671808.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:50:08.932Z,1520671808.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:50:09.329Z,1520671809.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:50:09.735Z,1520671809.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:50:10.141Z,1520671810.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:50:10.535Z,1520671810.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:50:10.932Z,1520671810.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:50:11.332Z,1520671811.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:50:11.741Z,1520671811.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:50:12.139Z,1520671812.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:50:12.534Z,1520671812.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:50:12.933Z,1520671812.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:50:13.339Z,1520671813.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:50:13.763Z,1520671813.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:50:14.144Z,1520671814.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:50:14.537Z,1520671814.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:50:14.933Z,1520671814.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:50:15.331Z,1520671815.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:50:15.742Z,1520671815.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:50:16.143Z,1520671816.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:50:16.549Z,1520671816.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:50:16.953Z,1520671816.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:50:17.341Z,1520671817.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:50:17.749Z,1520671817.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:50:18.146Z,1520671818.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:50:18.538Z,1520671818.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:50:18.936Z,1520671818.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:50:19.341Z,1520671819.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:50:19.738Z,1520671819.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:50:20.144Z,1520671820.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:50:20.543Z,1520671820.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:50:20.941Z,1520671820.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:50:21.336Z,1520671821.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:50:21.743Z,1520671821.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:50:22.142Z,1520671822.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:50:22.545Z,1520671822.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:50:22.937Z,1520671822.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:50:23.335Z,1520671823.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:50:23.743Z,1520671823.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:50:24.143Z,1520671824.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:50:24.543Z,1520671824.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:50:24.941Z,1520671824.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:50:25.341Z,1520671825.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:50:25.750Z,1520671825.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:50:26.157Z,1520671826.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:50:26.543Z,1520671826.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:50:26.935Z,1520671826.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:50:27.340Z,1520671827.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:50:27.753Z,1520671827.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:50:28.147Z,1520671828.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:50:28.544Z,1520671828.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:50:28.946Z,1520671828.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:50:29.347Z,1520671829.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:50:29.751Z,1520671829.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:50:30.146Z,1520671830.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:50:30.549Z,1520671830.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:50:30.937Z,1520671830.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:50:31.344Z,1520671831.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:50:31.753Z,1520671831.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:50:32.147Z,1520671832.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:50:32.542Z,1520671832.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:50:32.921Z,1520671832.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:50:33.325Z,1520671833.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:50:33.748Z,1520671833.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:50:34.149Z,1520671834.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:50:34.547Z,1520671834.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:50:34.948Z,1520671834.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:50:35.345Z,1520671835.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:50:35.753Z,1520671835.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:50:36.150Z,1520671836.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:50:36.545Z,1520671836.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:50:36.926Z,1520671836.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:50:37.349Z,1520671837.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:50:37.754Z,1520671837.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:50:38.165Z,1520671838.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:50:38.550Z,1520671838.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:50:38.933Z,1520671838.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:50:39.330Z,1520671839.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:50:39.755Z,1520671839.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:50:40.159Z,1520671840.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:50:40.530Z,1520671840.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:50:40.933Z,1520671840.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:50:41.330Z,1520671841.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:50:41.781Z,1520671841.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:50:42.165Z,1520671842.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:50:42.530Z,1520671842.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:50:42.929Z,1520671842.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:50:43.333Z,1520671843.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:50:43.731Z,1520671843.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:50:44.142Z,1520671844.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:50:44.537Z,1520671844.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:50:44.930Z,1520671844.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:50:45.328Z,1520671845.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:50:45.731Z,1520671845.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:50:46.162Z,1520671846.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:50:46.534Z,1520671846.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:50:46.930Z,1520671846.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:50:47.333Z,1520671847.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:50:47.730Z,1520671847.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:50:48.159Z,1520671848.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:50:48.535Z,1520671848.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:50:48.933Z,1520671848.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:50:49.337Z,1520671849.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:50:49.735Z,1520671849.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:50:50.138Z,1520671850.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:50:50.535Z,1520671850.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:50:50.936Z,1520671850.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:50:51.333Z,1520671851.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:50:51.742Z,1520671851.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:50:52.141Z,1520671852.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:50:52.548Z,1520671852.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:50:52.937Z,1520671852.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:50:53.330Z,1520671853.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:50:53.742Z,1520671853.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:50:54.141Z,1520671854.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:50:54.548Z,1520671854.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:50:54.950Z,1520671854.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:50:55.332Z,1520671855.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:50:55.740Z,1520671855.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:50:56.143Z,1520671856.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:50:56.543Z,1520671856.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:50:56.939Z,1520671856.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:50:57.337Z,1520671857.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:50:57.741Z,1520671857.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:50:57.744Z,1520671857.744 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-03-10T08:45:57.7Z
2018-03-10T08:50:57.744Z,1520671857.744 [Default:CheckIn:Read_GPS] Stopped
2018-03-10T08:50:57.744Z,1520671857.744 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-03-10T08:50:58.145Z,1520671858.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:50:58.680Z,1520671858.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:51:01.649Z,1520671861.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:51:01.784Z,1520671861.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:51:02.095Z,1520671862.095 [DataOverHttps](INFO): Sending 69 bytes from file Logs/20180310T051512/Courier0084.lzma
2018-03-10T08:51:02.181Z,1520671862.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:51:02.561Z,1520671862.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:51:02.893Z,1520671862.893 [DataOverHttps](INFO): Moved sent file to Logs/20180310T051512/Courier0084.lzma.bak
2018-03-10T08:51:02.893Z,1520671862.893 [DataOverHttps](INFO): SBD MOMSN=8003272
2018-03-10T08:51:02.958Z,1520671862.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:51:03.595Z,1520671863.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:51:03.745Z,1520671863.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:51:04.147Z,1520671864.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:51:04.542Z,1520671864.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:51:07.690Z,1520671867.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:51:07.849Z,1520671867.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:51:08.185Z,1520671868.185 [BPC1](ERROR): Failed to receive battery data
2018-03-10T08:51:08.185Z,1520671868.185 [BPC1] Communications Fault, FailCount= 1
2018-03-10T08:51:08.185Z,1520671868.185 [BPC1](ERROR): Communications Fault
2018-03-10T08:51:08.193Z,1520671868.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:51:08.206Z,1520671868.206 [CBIT](ERROR): Communications Fault in component: BPC1
2018-03-10T08:51:08.586Z,1520671868.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:51:08.985Z,1520671868.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:51:09.388Z,1520671869.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:51:09.401Z,1520671869.401 [CBIT](INFO): Clearing failed state for component BPC1
2018-03-10T08:51:09.401Z,1520671869.401 [BPC1] No Fault, FailCount= 1
2018-03-10T08:51:12.533Z,1520671872.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:51:12.681Z,1520671872.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:51:12.963Z,1520671872.963 [DataOverHttps](INFO): Sending 170 bytes from file Logs/20180310T051512/Express0085.lzma
2018-03-10T08:51:13.034Z,1520671873.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:51:13.411Z,1520671873.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:51:13.762Z,1520671873.762 [DataOverHttps](INFO): Moved sent file to Logs/20180310T051512/Express0085.lzma.bak
2018-03-10T08:51:13.764Z,1520671873.764 [DataOverHttps](INFO): SBD MOMSN=8003275
2018-03-10T08:51:13.823Z,1520671873.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:51:14.463Z,1520671874.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:51:14.466Z,1520671874.466 [Default:CheckIn:Read_Iridium] Stopped
2018-03-10T08:51:14.466Z,1520671874.466 [Default:CheckIn:C.Wait] Running Loop=1
2018-03-10T08:51:14.466Z,1520671874.466 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-03-10T08:51:14.625Z,1520671874.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:51:17.715Z,1520671877.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:51:17.848Z,1520671877.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:51:18.201Z,1520671878.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:51:18.597Z,1520671878.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:51:18.997Z,1520671878.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:51:19.397Z,1520671879.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:51:19.797Z,1520671879.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:51:20.199Z,1520671880.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:51:20.604Z,1520671880.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:51:20.981Z,1520671880.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:51:21.380Z,1520671881.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:51:21.785Z,1520671881.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:51:22.179Z,1520671882.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:51:22.605Z,1520671882.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:51:23.007Z,1520671883.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:51:23.390Z,1520671883.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:51:23.807Z,1520671883.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:51:24.189Z,1520671884.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:51:24.584Z,1520671884.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:51:24.985Z,1520671884.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:51:25.389Z,1520671885.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:51:25.793Z,1520671885.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:51:26.194Z,1520671886.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:51:26.598Z,1520671886.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:51:26.987Z,1520671886.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:51:27.388Z,1520671887.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:51:27.789Z,1520671887.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:51:28.185Z,1520671888.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:51:28.588Z,1520671888.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:51:28.989Z,1520671888.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:51:29.394Z,1520671889.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:51:29.792Z,1520671889.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:51:30.188Z,1520671890.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:51:30.588Z,1520671890.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:51:30.992Z,1520671890.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:51:31.386Z,1520671891.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:51:31.791Z,1520671891.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:51:32.194Z,1520671892.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:51:32.590Z,1520671892.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:51:32.987Z,1520671892.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:51:33.387Z,1520671893.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:51:33.788Z,1520671893.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:51:34.181Z,1520671894.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:51:34.586Z,1520671894.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:51:34.990Z,1520671894.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:51:35.390Z,1520671895.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:51:35.790Z,1520671895.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:51:36.184Z,1520671896.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:51:36.581Z,1520671896.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:51:36.993Z,1520671896.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:51:37.386Z,1520671897.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:51:37.790Z,1520671897.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:51:38.194Z,1520671898.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:51:38.590Z,1520671898.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:51:38.980Z,1520671898.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:51:39.389Z,1520671899.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:51:39.793Z,1520671899.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:51:40.189Z,1520671900.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:51:40.593Z,1520671900.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:51:40.998Z,1520671900.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:51:41.394Z,1520671901.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:51:41.873Z,1520671901.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:51:42.177Z,1520671902.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:51:42.573Z,1520671902.573 [BPC1](FAULT): Failed to initialize
2018-03-10T08:51:42.573Z,1520671902.573 [BPC1] Communications Fault, FailCount= 2
2018-03-10T08:51:42.573Z,1520671902.573 [BPC1](ERROR): Communications Fault
2018-03-10T08:51:42.580Z,1520671902.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:51:42.593Z,1520671902.593 [CBIT](ERROR): Communications Fault in component: BPC1
2018-03-10T08:51:42.989Z,1520671902.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:51:43.377Z,1520671903.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:51:43.786Z,1520671903.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:51:43.799Z,1520671903.799 [CBIT](INFO): Clearing failed state for component BPC1
2018-03-10T08:51:43.799Z,1520671903.799 [BPC1] No Fault, FailCount= 2
2018-03-10T08:51:44.241Z,1520671904.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:51:44.602Z,1520671904.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:51:44.979Z,1520671904.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:51:45.385Z,1520671905.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:51:45.805Z,1520671905.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:51:46.191Z,1520671906.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:51:46.617Z,1520671906.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:51:47.027Z,1520671907.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:51:47.474Z,1520671907.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:51:47.818Z,1520671907.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:51:48.196Z,1520671908.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:51:48.592Z,1520671908.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:51:48.990Z,1520671908.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:51:49.394Z,1520671909.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:51:49.829Z,1520671909.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:51:50.210Z,1520671910.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:51:50.598Z,1520671910.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:51:50.976Z,1520671910.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:51:51.389Z,1520671911.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:51:51.797Z,1520671911.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:51:52.190Z,1520671912.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:51:52.583Z,1520671912.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:51:52.995Z,1520671912.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:51:53.393Z,1520671913.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:51:53.798Z,1520671913.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:51:54.188Z,1520671914.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:51:54.585Z,1520671914.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:51:54.990Z,1520671914.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:51:55.385Z,1520671915.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:51:55.796Z,1520671915.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:51:56.197Z,1520671916.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:51:56.593Z,1520671916.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:51:56.992Z,1520671916.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:51:57.393Z,1520671917.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:51:57.790Z,1520671917.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:51:58.189Z,1520671918.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:51:58.581Z,1520671918.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:51:58.998Z,1520671918.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:51:59.402Z,1520671919.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:51:59.795Z,1520671919.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:52:00.191Z,1520671920.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:52:00.593Z,1520671920.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:52:00.990Z,1520671920.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:52:01.393Z,1520671921.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:52:01.800Z,1520671921.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:52:02.201Z,1520671922.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:52:02.602Z,1520671922.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:52:02.996Z,1520671922.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:52:03.373Z,1520671923.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:52:03.795Z,1520671923.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:52:04.180Z,1520671924.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:52:04.571Z,1520671924.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:52:05.009Z,1520671925.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:52:05.405Z,1520671925.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:52:05.804Z,1520671925.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:52:06.203Z,1520671926.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:52:06.580Z,1520671926.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:52:06.977Z,1520671926.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:52:07.384Z,1520671927.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:52:07.812Z,1520671927.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:52:08.209Z,1520671928.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:52:08.610Z,1520671928.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:52:08.983Z,1520671928.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:52:09.377Z,1520671929.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:52:09.784Z,1520671929.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:52:10.188Z,1520671930.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:52:10.581Z,1520671930.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:52:10.993Z,1520671930.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:52:11.394Z,1520671931.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:52:11.797Z,1520671931.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:52:12.188Z,1520671932.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:52:12.587Z,1520671932.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:52:12.988Z,1520671932.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:52:13.393Z,1520671933.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:52:13.790Z,1520671933.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:52:14.195Z,1520671934.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:52:14.584Z,1520671934.584 [BPC1](FAULT): Failed to initialize
2018-03-10T08:52:14.584Z,1520671934.584 [BPC1] Communications Fault, FailCount= 3
2018-03-10T08:52:14.584Z,1520671934.584 [BPC1](ERROR): Communications Fault
2018-03-10T08:52:14.591Z,1520671934.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:52:14.624Z,1520671934.624 [CBIT](ERROR): Communications Fault in component: BPC1
2018-03-10T08:52:14.985Z,1520671934.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:52:15.380Z,1520671935.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:52:15.793Z,1520671935.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:52:15.806Z,1520671935.806 [CBIT](INFO): Clearing failed state for component BPC1
2018-03-10T08:52:15.806Z,1520671935.806 [BPC1] No Fault, FailCount= 3
2018-03-10T08:52:16.233Z,1520671936.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:52:19.272Z,1520671939.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:52:19.429Z,1520671939.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:52:19.773Z,1520671939.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:52:20.150Z,1520671940.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:52:20.546Z,1520671940.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:52:20.944Z,1520671940.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:52:21.355Z,1520671941.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:52:21.753Z,1520671941.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:52:22.150Z,1520671942.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:52:22.542Z,1520671942.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:52:22.996Z,1520671942.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:52:23.366Z,1520671943.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:52:23.767Z,1520671943.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:52:24.162Z,1520671944.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:52:24.560Z,1520671944.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:52:24.939Z,1520671944.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:52:25.341Z,1520671945.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:52:25.745Z,1520671945.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:52:26.138Z,1520671946.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:52:26.545Z,1520671946.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:52:26.973Z,1520671946.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:52:27.343Z,1520671947.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:52:27.766Z,1520671947.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:52:28.148Z,1520671948.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:52:28.569Z,1520671948.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:52:28.945Z,1520671948.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:52:29.345Z,1520671949.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:52:29.742Z,1520671949.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:52:30.174Z,1520671950.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:52:30.575Z,1520671950.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:52:30.941Z,1520671950.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:52:31.350Z,1520671951.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:52:31.773Z,1520671951.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:52:32.173Z,1520671952.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:52:32.550Z,1520671952.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:52:32.952Z,1520671952.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:52:33.346Z,1520671953.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:52:33.772Z,1520671953.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:52:34.150Z,1520671954.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:52:34.546Z,1520671954.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:52:34.946Z,1520671954.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:52:35.343Z,1520671955.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:52:35.748Z,1520671955.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:52:36.150Z,1520671956.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:52:36.556Z,1520671956.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:52:36.952Z,1520671956.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:52:37.345Z,1520671957.345 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:52:37.345Z,1520671957.345 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 72
2018-03-10T08:52:37.345Z,1520671957.345 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-03-10T08:52:37.347Z,1520671957.347 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:52:37.347Z,1520671957.347 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 72
2018-03-10T08:52:37.347Z,1520671957.347 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-03-10T08:52:37.349Z,1520671957.349 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:52:37.349Z,1520671957.349 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 72
2018-03-10T08:52:37.349Z,1520671957.349 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-10T08:52:37.361Z,1520671957.361 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-03-10T08:52:37.361Z,1520671957.361 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-03-10T08:52:37.361Z,1520671957.361 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-10T08:52:37.775Z,1520671957.775 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-03-10T08:52:37.775Z,1520671957.775 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 72
2018-03-10T08:52:37.776Z,1520671957.776 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-03-10T08:52:37.776Z,1520671957.776 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 72
2018-03-10T08:52:37.776Z,1520671957.776 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-10T08:52:37.776Z,1520671957.776 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 72
2018-03-10T08:52:38.155Z,1520671958.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-03-10T08:52:38.156Z,1520671958.156 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-03-10T08:52:38.156Z,1520671958.156 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-03-10T08:52:38.156Z,1520671958.156 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-03-10T08:52:38.157Z,1520671958.157 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-03-10T08:52:38.157Z,1520671958.157 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-03-10T08:52:38.157Z,1520671958.157 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-10T08:52:38.158Z,1520671958.158 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-10T08:52:38.158Z,1520671958.158 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-10T08:52:38.564Z,1520671958.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-03-10T08:52:38.565Z,1520671958.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:52:38.972Z,1520671958.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-03-10T08:52:38.973Z,1520671958.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:52:39.348Z,1520671959.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-03-10T08:52:39.348Z,1520671959.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:52:39.776Z,1520671959.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-03-10T08:52:39.777Z,1520671959.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:52:40.149Z,1520671960.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-03-10T08:52:40.149Z,1520671960.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:52:40.573Z,1520671960.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-03-10T08:52:40.574Z,1520671960.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:52:40.968Z,1520671960.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-03-10T08:52:40.969Z,1520671960.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:52:41.366Z,1520671961.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-03-10T08:52:41.367Z,1520671961.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:52:41.742Z,1520671961.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-03-10T08:52:41.743Z,1520671961.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:52:42.145Z,1520671962.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-03-10T08:52:42.146Z,1520671962.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:52:42.547Z,1520671962.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-03-10T08:52:42.548Z,1520671962.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:52:42.949Z,1520671962.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-03-10T08:52:42.950Z,1520671962.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:52:43.346Z,1520671963.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-03-10T08:52:43.347Z,1520671963.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:52:43.756Z,1520671963.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-03-10T08:52:43.757Z,1520671963.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:52:44.149Z,1520671964.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-03-10T08:52:44.150Z,1520671964.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:52:44.550Z,1520671964.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-03-10T08:52:44.551Z,1520671964.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:52:44.948Z,1520671964.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-03-10T08:52:44.949Z,1520671964.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:52:45.340Z,1520671965.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-03-10T08:52:45.341Z,1520671965.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:52:45.745Z,1520671965.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-03-10T08:52:45.746Z,1520671965.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:52:46.146Z,1520671966.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-03-10T08:52:46.147Z,1520671966.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:52:46.536Z,1520671966.536 [BPC1](FAULT): Failed to initialize
2018-03-10T08:52:46.536Z,1520671966.536 [BPC1] Communications Fault, FailCount= 4
2018-03-10T08:52:46.536Z,1520671966.536 [BPC1](ERROR): Communications Fault
2018-03-10T08:52:46.542Z,1520671966.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-03-10T08:52:46.544Z,1520671966.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:52:46.556Z,1520671966.556 [CBIT](ERROR): Communications Fault in component: BPC1
2018-03-10T08:52:46.981Z,1520671966.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-03-10T08:52:46.982Z,1520671966.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:52:47.356Z,1520671967.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-03-10T08:52:47.357Z,1520671967.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:52:47.758Z,1520671967.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-03-10T08:52:47.763Z,1520671967.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:52:47.788Z,1520671967.788 [CBIT](INFO): Clearing failed state for component BPC1
2018-03-10T08:52:47.788Z,1520671967.788 [BPC1] No Fault, FailCount= 4
2018-03-10T08:52:48.204Z,1520671968.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.9 s old, using for 20.0 s.
2018-03-10T08:52:48.205Z,1520671968.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:52:48.545Z,1520671968.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-03-10T08:52:48.546Z,1520671968.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:52:48.949Z,1520671968.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-03-10T08:52:48.950Z,1520671968.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:52:49.345Z,1520671969.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-03-10T08:52:49.346Z,1520671969.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:52:49.755Z,1520671969.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-03-10T08:52:49.756Z,1520671969.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:52:50.154Z,1520671970.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-03-10T08:52:50.155Z,1520671970.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:52:50.564Z,1520671970.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-03-10T08:52:50.565Z,1520671970.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:52:50.949Z,1520671970.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-03-10T08:52:50.950Z,1520671970.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:52:51.347Z,1520671971.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-03-10T08:52:51.348Z,1520671971.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:52:51.753Z,1520671971.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-03-10T08:52:51.754Z,1520671971.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:52:52.157Z,1520671972.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-03-10T08:52:52.158Z,1520671972.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:52:52.558Z,1520671972.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-03-10T08:52:52.559Z,1520671972.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:52:52.943Z,1520671972.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-03-10T08:52:52.944Z,1520671972.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:52:53.347Z,1520671973.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-03-10T08:52:53.348Z,1520671973.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:52:53.748Z,1520671973.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-03-10T08:52:53.749Z,1520671973.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:52:54.144Z,1520671974.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-03-10T08:52:54.145Z,1520671974.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:52:54.549Z,1520671974.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-03-10T08:52:54.550Z,1520671974.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:52:54.954Z,1520671974.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-03-10T08:52:54.955Z,1520671974.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:52:55.357Z,1520671975.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-03-10T08:52:55.358Z,1520671975.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:52:55.757Z,1520671975.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2018-03-10T08:52:55.758Z,1520671975.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:52:56.147Z,1520671976.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2018-03-10T08:52:56.148Z,1520671976.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:52:56.549Z,1520671976.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2018-03-10T08:52:56.550Z,1520671976.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:52:56.951Z,1520671976.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2018-03-10T08:52:56.952Z,1520671976.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:52:57.350Z,1520671977.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:52:57.765Z,1520671977.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:52:58.161Z,1520671978.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:52:58.559Z,1520671978.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:52:58.950Z,1520671978.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:52:59.358Z,1520671979.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:52:59.760Z,1520671979.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:53:00.169Z,1520671980.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:53:00.559Z,1520671980.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:53:00.952Z,1520671980.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:53:01.361Z,1520671981.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:53:01.760Z,1520671981.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:53:02.158Z,1520671982.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:53:02.559Z,1520671982.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:53:02.953Z,1520671982.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:53:03.352Z,1520671983.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:53:03.769Z,1520671983.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:53:04.157Z,1520671984.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:53:04.557Z,1520671984.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:53:04.952Z,1520671984.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:53:05.352Z,1520671985.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:53:05.760Z,1520671985.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:53:06.160Z,1520671986.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:53:06.581Z,1520671986.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:53:06.951Z,1520671986.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:53:07.351Z,1520671987.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:53:07.761Z,1520671987.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:53:08.164Z,1520671988.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:53:08.558Z,1520671988.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:53:08.952Z,1520671988.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:53:09.348Z,1520671989.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:53:09.759Z,1520671989.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:53:10.164Z,1520671990.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:53:10.560Z,1520671990.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:53:10.954Z,1520671990.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:53:11.355Z,1520671991.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:53:11.742Z,1520671991.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:53:12.172Z,1520671992.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:53:12.544Z,1520671992.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:53:12.966Z,1520671992.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:53:13.366Z,1520671993.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:53:13.770Z,1520671993.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:53:14.139Z,1520671994.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:53:14.549Z,1520671994.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:53:14.945Z,1520671994.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:53:15.341Z,1520671995.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:53:15.772Z,1520671995.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:53:16.174Z,1520671996.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:53:16.549Z,1520671996.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:53:19.679Z,1520671999.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:53:19.813Z,1520671999.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:53:20.184Z,1520672000.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:53:20.586Z,1520672000.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:53:20.986Z,1520672000.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:53:21.365Z,1520672001.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:53:21.765Z,1520672001.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:53:22.161Z,1520672002.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:53:22.561Z,1520672002.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:53:22.997Z,1520672002.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:53:23.396Z,1520672003.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:53:23.788Z,1520672003.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:53:24.161Z,1520672004.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:53:24.561Z,1520672004.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:53:24.962Z,1520672004.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:53:25.362Z,1520672005.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:53:25.788Z,1520672005.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:53:26.166Z,1520672006.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:53:26.590Z,1520672006.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:53:26.961Z,1520672006.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:53:27.361Z,1520672007.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:53:27.761Z,1520672007.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:53:28.162Z,1520672008.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:53:28.561Z,1520672008.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:53:28.963Z,1520672008.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:53:29.388Z,1520672009.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:53:29.767Z,1520672009.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:53:30.162Z,1520672010.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:53:30.561Z,1520672010.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:53:30.962Z,1520672010.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:53:31.365Z,1520672011.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:53:31.788Z,1520672011.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:53:32.205Z,1520672012.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:53:32.592Z,1520672012.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:53:32.956Z,1520672012.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:53:33.365Z,1520672013.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:53:33.769Z,1520672013.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:53:34.177Z,1520672014.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:53:34.564Z,1520672014.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:53:34.967Z,1520672014.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:53:35.370Z,1520672015.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:53:35.770Z,1520672015.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:53:36.163Z,1520672016.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:53:36.556Z,1520672016.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:53:36.966Z,1520672016.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:53:37.364Z,1520672017.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:53:37.767Z,1520672017.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:53:38.170Z,1520672018.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:53:38.567Z,1520672018.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:53:38.966Z,1520672018.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:53:39.366Z,1520672019.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:53:39.766Z,1520672019.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:53:40.167Z,1520672020.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:53:40.566Z,1520672020.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:53:40.969Z,1520672020.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:53:41.377Z,1520672021.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:53:41.772Z,1520672021.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:53:42.165Z,1520672022.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:53:42.565Z,1520672022.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:53:42.962Z,1520672022.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:53:43.366Z,1520672023.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:53:43.769Z,1520672023.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:53:44.174Z,1520672024.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:53:44.574Z,1520672024.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:53:45.005Z,1520672025.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:53:45.393Z,1520672025.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:53:45.765Z,1520672025.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:53:46.160Z,1520672026.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:53:46.629Z,1520672026.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:53:46.993Z,1520672026.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:53:47.389Z,1520672027.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:53:47.801Z,1520672027.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:53:48.165Z,1520672028.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:53:48.561Z,1520672028.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:53:48.964Z,1520672028.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:53:49.365Z,1520672029.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:53:49.785Z,1520672029.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:53:50.246Z,1520672030.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:53:50.567Z,1520672030.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:53:50.959Z,1520672030.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:53:51.369Z,1520672031.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:53:51.761Z,1520672031.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:53:52.160Z,1520672032.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:53:52.563Z,1520672032.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:53:52.967Z,1520672032.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:53:53.371Z,1520672033.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:53:53.776Z,1520672033.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:53:54.164Z,1520672034.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:53:54.560Z,1520672034.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:53:54.964Z,1520672034.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:53:55.364Z,1520672035.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:53:55.767Z,1520672035.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:53:56.210Z,1520672036.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:53:56.595Z,1520672036.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:53:56.961Z,1520672036.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:53:57.373Z,1520672037.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:53:57.765Z,1520672037.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:53:58.165Z,1520672038.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:53:58.568Z,1520672038.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:53:58.970Z,1520672038.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:53:59.370Z,1520672039.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:53:59.776Z,1520672039.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:54:00.162Z,1520672040.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:54:00.564Z,1520672040.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:54:00.969Z,1520672040.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:54:01.362Z,1520672041.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:54:01.766Z,1520672041.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:54:02.176Z,1520672042.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:54:02.570Z,1520672042.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:54:02.965Z,1520672042.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:54:03.361Z,1520672043.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:54:03.765Z,1520672043.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:54:04.164Z,1520672044.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:54:04.563Z,1520672044.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:54:04.971Z,1520672044.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:54:05.373Z,1520672045.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:54:05.776Z,1520672045.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:54:06.172Z,1520672046.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:54:06.560Z,1520672046.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:54:06.963Z,1520672046.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:54:07.363Z,1520672047.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:54:07.788Z,1520672047.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:54:08.211Z,1520672048.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:54:08.588Z,1520672048.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:54:08.963Z,1520672048.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:54:09.368Z,1520672049.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:54:09.793Z,1520672049.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:54:10.166Z,1520672050.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:54:10.568Z,1520672050.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:54:10.975Z,1520672050.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:54:11.381Z,1520672051.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:54:11.784Z,1520672051.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:54:12.169Z,1520672052.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:54:12.566Z,1520672052.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:54:12.967Z,1520672052.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:54:13.368Z,1520672053.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:54:13.766Z,1520672053.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:54:14.178Z,1520672054.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:54:14.576Z,1520672054.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:54:14.968Z,1520672054.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:54:15.376Z,1520672055.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:54:18.477Z,1520672058.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:54:18.613Z,1520672058.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:54:18.981Z,1520672058.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:54:19.386Z,1520672059.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:54:19.793Z,1520672059.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:54:20.147Z,1520672060.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:54:20.548Z,1520672060.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:54:20.949Z,1520672060.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:54:21.350Z,1520672061.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:54:21.788Z,1520672061.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:54:22.185Z,1520672062.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:54:22.577Z,1520672062.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:54:22.948Z,1520672062.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:54:23.347Z,1520672063.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:54:23.747Z,1520672063.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:54:24.150Z,1520672064.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:54:24.553Z,1520672064.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:54:24.977Z,1520672064.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:54:25.354Z,1520672065.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:54:25.776Z,1520672065.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:54:26.148Z,1520672066.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:54:26.553Z,1520672066.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:54:26.947Z,1520672066.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:54:27.347Z,1520672067.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:54:27.755Z,1520672067.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:54:28.176Z,1520672068.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:54:28.551Z,1520672068.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:54:28.950Z,1520672068.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:54:29.353Z,1520672069.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:54:29.777Z,1520672069.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:54:30.153Z,1520672070.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:54:30.577Z,1520672070.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:54:30.956Z,1520672070.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:54:31.380Z,1520672071.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:54:31.749Z,1520672071.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:54:32.149Z,1520672072.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:54:32.548Z,1520672072.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:54:32.952Z,1520672072.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:54:33.354Z,1520672073.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:54:33.781Z,1520672073.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:54:34.153Z,1520672074.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:54:34.581Z,1520672074.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:54:34.954Z,1520672074.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:54:35.351Z,1520672075.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:54:35.758Z,1520672075.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:54:36.158Z,1520672076.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:54:36.558Z,1520672076.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:54:36.951Z,1520672076.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:54:37.347Z,1520672077.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:54:37.757Z,1520672077.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:54:38.153Z,1520672078.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:54:38.549Z,1520672078.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:54:38.954Z,1520672078.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:54:39.354Z,1520672079.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:54:39.764Z,1520672079.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:54:40.157Z,1520672080.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:54:40.551Z,1520672080.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:54:40.949Z,1520672080.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:54:41.351Z,1520672081.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:54:41.765Z,1520672081.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:54:42.168Z,1520672082.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:54:42.568Z,1520672082.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:54:42.969Z,1520672082.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:54:43.353Z,1520672083.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:54:43.757Z,1520672083.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:54:44.153Z,1520672084.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:54:44.548Z,1520672084.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:54:44.969Z,1520672084.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:54:45.361Z,1520672085.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:54:45.761Z,1520672085.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:54:46.153Z,1520672086.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:54:46.555Z,1520672086.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:54:46.961Z,1520672086.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:54:47.353Z,1520672087.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:54:47.758Z,1520672087.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:54:48.165Z,1520672088.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:54:48.562Z,1520672088.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:54:48.957Z,1520672088.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:54:49.354Z,1520672089.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:54:49.757Z,1520672089.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:54:50.153Z,1520672090.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:54:50.547Z,1520672090.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:54:50.962Z,1520672090.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:54:51.373Z,1520672091.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:54:51.764Z,1520672091.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:54:52.157Z,1520672092.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:54:52.561Z,1520672092.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:54:52.957Z,1520672092.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:54:53.351Z,1520672093.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:54:53.769Z,1520672093.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:54:54.197Z,1520672094.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:54:54.564Z,1520672094.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:54:54.951Z,1520672094.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:54:55.370Z,1520672095.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:54:55.755Z,1520672095.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:54:56.153Z,1520672096.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:54:56.554Z,1520672096.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:54:56.969Z,1520672096.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:54:57.373Z,1520672097.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:54:57.768Z,1520672097.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:54:58.158Z,1520672098.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:54:58.549Z,1520672098.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:54:58.980Z,1520672098.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:54:59.377Z,1520672099.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:54:59.762Z,1520672099.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:55:00.163Z,1520672100.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:55:00.562Z,1520672100.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:55:00.955Z,1520672100.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:55:01.364Z,1520672101.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:55:01.753Z,1520672101.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:55:02.157Z,1520672102.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:55:02.561Z,1520672102.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:55:02.964Z,1520672102.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:55:03.362Z,1520672103.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:55:03.764Z,1520672103.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:55:04.159Z,1520672104.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:55:04.559Z,1520672104.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:55:04.961Z,1520672104.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:55:05.373Z,1520672105.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:55:05.788Z,1520672105.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:55:06.167Z,1520672106.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:55:06.569Z,1520672106.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:55:06.961Z,1520672106.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:55:07.344Z,1520672107.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:55:07.765Z,1520672107.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:55:08.169Z,1520672108.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:55:08.548Z,1520672108.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:55:08.974Z,1520672108.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:55:09.374Z,1520672109.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:55:09.778Z,1520672109.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:55:10.153Z,1520672110.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:55:10.549Z,1520672110.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:55:10.949Z,1520672110.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:55:11.352Z,1520672111.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:55:11.781Z,1520672111.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:55:12.153Z,1520672112.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:55:12.556Z,1520672112.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:55:12.957Z,1520672112.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:55:13.346Z,1520672113.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:55:13.753Z,1520672113.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:55:14.149Z,1520672114.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:55:14.549Z,1520672114.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:55:14.955Z,1520672114.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:55:15.358Z,1520672115.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:55:15.760Z,1520672115.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:55:18.858Z,1520672118.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:55:19.001Z,1520672119.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:55:19.385Z,1520672119.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:55:19.766Z,1520672119.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:55:20.182Z,1520672120.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:55:20.560Z,1520672120.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:55:20.957Z,1520672120.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:55:21.358Z,1520672121.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:55:21.785Z,1520672121.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:55:22.162Z,1520672122.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:55:22.562Z,1520672122.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:55:22.956Z,1520672122.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:55:23.355Z,1520672123.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:55:23.757Z,1520672123.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:55:24.164Z,1520672124.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:55:24.561Z,1520672124.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:55:24.987Z,1520672124.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:55:25.370Z,1520672125.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:55:25.770Z,1520672125.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:55:26.156Z,1520672126.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:55:26.556Z,1520672126.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:55:26.965Z,1520672126.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:55:27.365Z,1520672127.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:55:27.766Z,1520672127.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:55:27.799Z,1520672127.799 [CBIT](DEBUG): EFC running - data check-sum false
2018-03-10T08:55:28.166Z,1520672128.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:55:28.573Z,1520672128.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:55:28.961Z,1520672128.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:55:29.361Z,1520672129.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:55:29.766Z,1520672129.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:55:30.169Z,1520672130.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:55:30.561Z,1520672130.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:55:30.973Z,1520672130.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:55:31.366Z,1520672131.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:55:31.773Z,1520672131.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:55:32.161Z,1520672132.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:55:32.568Z,1520672132.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:55:32.961Z,1520672132.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:55:33.358Z,1520672133.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:55:33.767Z,1520672133.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:55:34.166Z,1520672134.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:55:34.573Z,1520672134.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:55:34.962Z,1520672134.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:55:35.369Z,1520672135.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:55:35.757Z,1520672135.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:55:36.164Z,1520672136.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:55:36.595Z,1520672136.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:55:36.966Z,1520672136.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:55:37.373Z,1520672137.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:55:37.766Z,1520672137.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:55:38.160Z,1520672138.160 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:55:38.161Z,1520672138.161 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 73
2018-03-10T08:55:38.161Z,1520672138.161 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-03-10T08:55:38.162Z,1520672138.162 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:55:38.162Z,1520672138.162 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 73
2018-03-10T08:55:38.163Z,1520672138.163 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-03-10T08:55:38.164Z,1520672138.164 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:55:38.165Z,1520672138.165 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 73
2018-03-10T08:55:38.165Z,1520672138.165 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-10T08:55:38.176Z,1520672138.176 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-03-10T08:55:38.177Z,1520672138.177 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-03-10T08:55:38.177Z,1520672138.177 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-10T08:55:38.579Z,1520672138.579 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-03-10T08:55:38.579Z,1520672138.579 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 73
2018-03-10T08:55:38.580Z,1520672138.580 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-03-10T08:55:38.580Z,1520672138.580 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 73
2018-03-10T08:55:38.580Z,1520672138.580 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-10T08:55:38.580Z,1520672138.580 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 73
2018-03-10T08:55:38.960Z,1520672138.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-03-10T08:55:38.960Z,1520672138.960 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-03-10T08:55:38.960Z,1520672138.960 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-03-10T08:55:38.961Z,1520672138.961 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-03-10T08:55:38.961Z,1520672138.961 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-03-10T08:55:38.961Z,1520672138.961 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-03-10T08:55:38.962Z,1520672138.962 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-10T08:55:38.962Z,1520672138.962 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-10T08:55:38.962Z,1520672138.962 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-10T08:55:39.365Z,1520672139.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-03-10T08:55:39.366Z,1520672139.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:55:39.770Z,1520672139.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-03-10T08:55:39.772Z,1520672139.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:55:40.173Z,1520672140.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-03-10T08:55:40.174Z,1520672140.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:55:40.571Z,1520672140.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-03-10T08:55:40.572Z,1520672140.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:55:40.959Z,1520672140.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-03-10T08:55:40.960Z,1520672140.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:55:41.361Z,1520672141.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-03-10T08:55:41.362Z,1520672141.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:55:41.762Z,1520672141.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-03-10T08:55:41.764Z,1520672141.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:55:42.192Z,1520672142.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-03-10T08:55:42.193Z,1520672142.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:55:42.582Z,1520672142.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-03-10T08:55:42.583Z,1520672142.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:55:42.979Z,1520672142.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-03-10T08:55:42.980Z,1520672142.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:55:43.388Z,1520672143.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-03-10T08:55:43.389Z,1520672143.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:55:43.782Z,1520672143.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-03-10T08:55:43.783Z,1520672143.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:55:44.180Z,1520672144.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-03-10T08:55:44.181Z,1520672144.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:55:44.556Z,1520672144.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-03-10T08:55:44.557Z,1520672144.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:55:44.954Z,1520672144.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-03-10T08:55:44.955Z,1520672144.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:55:45.355Z,1520672145.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-03-10T08:55:45.356Z,1520672145.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:55:45.762Z,1520672145.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-03-10T08:55:45.763Z,1520672145.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:55:46.158Z,1520672146.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-03-10T08:55:46.159Z,1520672146.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:55:46.584Z,1520672146.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-03-10T08:55:46.585Z,1520672146.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:55:46.955Z,1520672146.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-03-10T08:55:46.956Z,1520672146.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:55:47.355Z,1520672147.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-03-10T08:55:47.356Z,1520672147.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:55:47.760Z,1520672147.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-03-10T08:55:47.761Z,1520672147.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:55:48.156Z,1520672148.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-03-10T08:55:48.157Z,1520672148.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:55:48.560Z,1520672148.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-03-10T08:55:48.561Z,1520672148.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:55:48.985Z,1520672148.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-03-10T08:55:48.986Z,1520672148.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:55:49.386Z,1520672149.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-03-10T08:55:49.387Z,1520672149.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:55:49.758Z,1520672149.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-03-10T08:55:49.759Z,1520672149.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:55:50.157Z,1520672150.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-03-10T08:55:50.158Z,1520672150.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:55:50.556Z,1520672150.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-03-10T08:55:50.557Z,1520672150.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:55:50.958Z,1520672150.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-03-10T08:55:50.959Z,1520672150.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:55:51.354Z,1520672151.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-03-10T08:55:51.355Z,1520672151.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:55:51.785Z,1520672151.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-03-10T08:55:51.786Z,1520672151.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:55:52.184Z,1520672152.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-03-10T08:55:52.185Z,1520672152.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:55:52.558Z,1520672152.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-03-10T08:55:52.559Z,1520672152.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:55:52.988Z,1520672152.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-03-10T08:55:52.989Z,1520672152.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:55:53.387Z,1520672153.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-03-10T08:55:53.388Z,1520672153.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:55:53.755Z,1520672153.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-03-10T08:55:53.756Z,1520672153.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:55:54.157Z,1520672154.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-03-10T08:55:54.158Z,1520672154.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:55:54.561Z,1520672154.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-03-10T08:55:54.562Z,1520672154.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:55:54.990Z,1520672154.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-03-10T08:55:54.991Z,1520672154.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:55:55.368Z,1520672155.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-03-10T08:55:55.369Z,1520672155.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:55:55.762Z,1520672155.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-03-10T08:55:55.763Z,1520672155.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:55:56.158Z,1520672156.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-03-10T08:55:56.159Z,1520672156.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:55:56.560Z,1520672156.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2018-03-10T08:55:56.561Z,1520672156.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:55:56.953Z,1520672156.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2018-03-10T08:55:56.954Z,1520672156.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:55:57.355Z,1520672157.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2018-03-10T08:55:57.356Z,1520672157.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:55:57.762Z,1520672157.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2018-03-10T08:55:57.764Z,1520672157.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:55:58.161Z,1520672158.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:55:58.562Z,1520672158.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:55:58.961Z,1520672158.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:55:59.359Z,1520672159.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:55:59.760Z,1520672159.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:56:00.158Z,1520672160.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:56:00.560Z,1520672160.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:56:00.963Z,1520672160.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:56:01.367Z,1520672161.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:56:01.762Z,1520672161.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:56:02.165Z,1520672162.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:56:02.569Z,1520672162.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:56:02.965Z,1520672162.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:56:03.359Z,1520672163.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:56:03.789Z,1520672163.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:56:04.174Z,1520672164.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:56:04.575Z,1520672164.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:56:04.977Z,1520672164.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:56:05.367Z,1520672165.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:56:05.767Z,1520672165.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:56:06.173Z,1520672166.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:56:06.566Z,1520672166.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:56:06.979Z,1520672166.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:56:07.382Z,1520672167.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:56:07.777Z,1520672167.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:56:08.169Z,1520672168.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:56:08.553Z,1520672168.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:56:08.957Z,1520672168.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:56:09.356Z,1520672169.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:56:09.781Z,1520672169.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:56:10.162Z,1520672170.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:56:10.583Z,1520672170.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:56:10.958Z,1520672170.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:56:11.359Z,1520672171.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:56:11.755Z,1520672171.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:56:12.155Z,1520672172.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:56:12.582Z,1520672172.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:56:12.972Z,1520672172.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:56:13.387Z,1520672173.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:56:13.784Z,1520672173.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:56:14.158Z,1520672174.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:56:14.556Z,1520672174.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:56:14.956Z,1520672174.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:56:14.958Z,1520672174.958 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-03-10T08:56:14.959Z,1520672174.959 [Default:CheckIn:C.Wait] Stopped
2018-03-10T08:56:14.959Z,1520672174.959 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-03-10T08:56:14.959Z,1520672174.959 [Default:CheckIn:D] Running Loop=1
2018-03-10T08:56:15.355Z,1520672175.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:56:15.358Z,1520672175.358 [Default:CheckIn:D] Stopped
2018-03-10T08:56:15.359Z,1520672175.359 [Default:CheckIn:E] Running Loop=1
2018-03-10T08:56:15.781Z,1520672175.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:56:15.788Z,1520672175.788 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 216.957292 min 
2018-03-10T08:56:15.789Z,1520672175.789 [Default:CheckIn:E] Stopped
2018-03-10T08:56:15.789Z,1520672175.789 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-03-10T08:56:15.789Z,1520672175.789 [Default:CheckIn] Stopped
2018-03-10T08:56:15.789Z,1520672175.789 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-03-10T08:56:15.789Z,1520672175.789 [Default:CheckIn](INFO): Running loop #22
2018-03-10T08:56:15.789Z,1520672175.789 [Default:CheckIn] Running Loop=22
2018-03-10T08:56:15.789Z,1520672175.789 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-03-10T08:56:15.789Z,1520672175.789 [Default:CheckIn:Read_GPS] Running Loop=1
2018-03-10T08:56:18.896Z,1520672178.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:56:19.044Z,1520672179.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:56:19.388Z,1520672179.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:56:19.797Z,1520672179.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:56:20.169Z,1520672180.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:56:20.560Z,1520672180.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:56:20.992Z,1520672180.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:56:21.394Z,1520672181.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:56:21.800Z,1520672181.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:56:22.173Z,1520672182.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:56:22.563Z,1520672182.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:56:22.969Z,1520672182.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:56:23.361Z,1520672183.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:56:23.794Z,1520672183.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:56:24.193Z,1520672184.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:56:24.599Z,1520672184.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:56:24.965Z,1520672184.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:56:25.365Z,1520672185.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:56:25.766Z,1520672185.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:56:26.169Z,1520672186.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:56:26.577Z,1520672186.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:56:26.995Z,1520672186.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:56:27.382Z,1520672187.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:56:27.778Z,1520672187.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:56:28.171Z,1520672188.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:56:28.568Z,1520672188.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:56:28.976Z,1520672188.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:56:29.371Z,1520672189.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:56:29.780Z,1520672189.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:56:30.205Z,1520672190.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:56:30.578Z,1520672190.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:56:30.972Z,1520672190.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:56:31.369Z,1520672191.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:56:31.780Z,1520672191.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:56:32.185Z,1520672192.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:56:32.569Z,1520672192.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:56:32.982Z,1520672192.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:56:33.381Z,1520672193.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:56:33.789Z,1520672193.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:56:34.177Z,1520672194.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:56:34.572Z,1520672194.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:56:34.974Z,1520672194.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:56:35.375Z,1520672195.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:56:35.780Z,1520672195.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:56:36.188Z,1520672196.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:56:36.583Z,1520672196.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:56:36.970Z,1520672196.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:56:37.377Z,1520672197.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:56:37.781Z,1520672197.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:56:38.172Z,1520672198.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:56:38.580Z,1520672198.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:56:38.983Z,1520672198.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:56:39.382Z,1520672199.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:56:39.783Z,1520672199.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:56:40.177Z,1520672200.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:56:40.579Z,1520672200.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:56:40.986Z,1520672200.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:56:41.396Z,1520672201.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:56:41.785Z,1520672201.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:56:42.197Z,1520672202.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:56:42.586Z,1520672202.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:56:42.965Z,1520672202.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:56:43.367Z,1520672203.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:56:43.765Z,1520672203.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:56:44.192Z,1520672204.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:56:44.577Z,1520672204.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:56:44.998Z,1520672204.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:56:45.378Z,1520672205.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:56:45.798Z,1520672205.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:56:46.177Z,1520672206.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:56:46.569Z,1520672206.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:56:46.978Z,1520672206.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:56:47.370Z,1520672207.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:56:47.728Z,1520672207.728 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-03-10T08:56:47.728Z,1520672207.728 [NAL9602] Data Fault, FailCount= 1
2018-03-10T08:56:47.728Z,1520672207.728 [NAL9602](ERROR): Data Fault
2018-03-10T08:56:47.779Z,1520672207.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:56:47.804Z,1520672207.804 [CBIT](ERROR): Data Fault in component: NAL9602
2018-03-10T08:56:48.128Z,1520672208.128 [NAL9602](INFO): Powering down
2018-03-10T08:56:48.179Z,1520672208.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:56:48.577Z,1520672208.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:56:48.969Z,1520672208.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:56:48.982Z,1520672208.982 [CBIT](INFO): Clearing failed state for component NAL9602
2018-03-10T08:56:48.982Z,1520672208.982 [NAL9602] No Fault, FailCount= 1
2018-03-10T08:56:49.376Z,1520672209.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:56:49.768Z,1520672209.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:56:50.169Z,1520672210.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:56:50.576Z,1520672210.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:56:50.977Z,1520672210.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:56:51.372Z,1520672211.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:56:51.773Z,1520672211.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:56:52.169Z,1520672212.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:56:52.575Z,1520672212.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:56:52.988Z,1520672212.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:56:53.367Z,1520672213.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:56:53.777Z,1520672213.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:56:54.172Z,1520672214.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:56:54.576Z,1520672214.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:56:54.972Z,1520672214.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:56:55.376Z,1520672215.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:56:55.773Z,1520672215.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:56:56.172Z,1520672216.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:56:56.577Z,1520672216.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:56:56.982Z,1520672216.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:56:57.385Z,1520672217.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:56:57.790Z,1520672217.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:56:58.164Z,1520672218.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:56:58.567Z,1520672218.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:56:58.964Z,1520672218.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:56:59.372Z,1520672219.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:56:59.760Z,1520672219.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:57:00.167Z,1520672220.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:57:00.561Z,1520672220.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:57:00.967Z,1520672220.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:57:01.372Z,1520672221.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:57:01.764Z,1520672221.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:57:02.168Z,1520672222.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:57:02.566Z,1520672222.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:57:02.968Z,1520672222.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:57:03.374Z,1520672223.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:57:03.777Z,1520672223.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:57:04.168Z,1520672224.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:57:04.568Z,1520672224.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:57:04.968Z,1520672224.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:57:05.364Z,1520672225.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:57:05.763Z,1520672225.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:57:06.176Z,1520672226.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:57:06.568Z,1520672226.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:57:06.967Z,1520672226.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:57:07.369Z,1520672227.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:57:07.768Z,1520672227.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:57:08.168Z,1520672228.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:57:08.567Z,1520672228.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:57:08.974Z,1520672228.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:57:09.400Z,1520672229.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:57:09.772Z,1520672229.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:57:10.171Z,1520672230.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:57:10.571Z,1520672230.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:57:10.971Z,1520672230.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:57:11.367Z,1520672231.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:57:11.772Z,1520672231.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:57:12.176Z,1520672232.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:57:12.572Z,1520672232.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:57:12.965Z,1520672232.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:57:13.368Z,1520672233.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:57:13.773Z,1520672233.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:57:14.177Z,1520672234.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:57:14.577Z,1520672234.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:57:14.978Z,1520672234.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:57:15.389Z,1520672235.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:57:15.768Z,1520672235.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:57:18.858Z,1520672238.858 [NAL9602](INFO): Powering up NAL9602
2018-03-10T08:57:18.912Z,1520672238.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:57:19.037Z,1520672239.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:57:19.392Z,1520672239.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:57:19.817Z,1520672239.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:57:20.193Z,1520672240.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:57:20.617Z,1520672240.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:57:20.988Z,1520672240.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:57:21.402Z,1520672241.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:57:21.824Z,1520672241.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:57:22.197Z,1520672242.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:57:22.601Z,1520672242.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:57:22.997Z,1520672242.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:57:23.397Z,1520672243.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:57:23.797Z,1520672243.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:57:24.197Z,1520672244.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:57:24.595Z,1520672244.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:57:25.001Z,1520672245.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:57:25.394Z,1520672245.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:57:25.812Z,1520672245.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:57:26.213Z,1520672246.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:57:26.617Z,1520672246.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:57:27.002Z,1520672247.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:57:27.409Z,1520672247.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:57:27.801Z,1520672247.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:57:28.212Z,1520672248.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:57:28.601Z,1520672248.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:57:29.004Z,1520672249.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:57:29.418Z,1520672249.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:57:29.760Z,1520672249.760 [NAL9602](INFO): NAL9602 initialized
2018-03-10T08:57:29.806Z,1520672249.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:57:30.213Z,1520672250.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:57:30.624Z,1520672250.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:57:31.015Z,1520672251.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:57:31.412Z,1520672251.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:57:31.814Z,1520672251.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:57:32.202Z,1520672252.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:57:32.607Z,1520672252.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:57:32.998Z,1520672252.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:57:33.385Z,1520672253.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:57:33.820Z,1520672253.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:57:34.232Z,1520672254.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:57:34.621Z,1520672254.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:57:35.012Z,1520672255.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:57:35.417Z,1520672255.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:57:35.789Z,1520672255.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:57:36.192Z,1520672256.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:57:36.629Z,1520672256.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:57:37.014Z,1520672257.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:57:37.421Z,1520672257.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:57:37.821Z,1520672257.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:57:38.193Z,1520672258.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:57:38.593Z,1520672258.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:57:38.994Z,1520672258.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:57:39.396Z,1520672259.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:57:39.822Z,1520672259.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:57:40.225Z,1520672260.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:57:40.594Z,1520672260.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:57:41.001Z,1520672261.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:57:41.392Z,1520672261.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:57:41.789Z,1520672261.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:57:42.198Z,1520672262.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:57:42.625Z,1520672262.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:57:43.006Z,1520672263.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:57:43.410Z,1520672263.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:57:43.798Z,1520672263.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:57:44.201Z,1520672264.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:57:44.602Z,1520672264.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:57:45.011Z,1520672265.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:57:45.402Z,1520672265.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:57:45.816Z,1520672265.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:57:46.218Z,1520672266.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:57:46.607Z,1520672266.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:57:47.007Z,1520672267.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:57:47.458Z,1520672267.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:57:47.819Z,1520672267.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:57:48.209Z,1520672268.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:57:48.664Z,1520672268.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:57:49.033Z,1520672269.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:57:49.398Z,1520672269.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:57:49.804Z,1520672269.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:57:50.196Z,1520672270.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:57:50.596Z,1520672270.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:57:50.997Z,1520672270.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:57:51.405Z,1520672271.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:57:51.803Z,1520672271.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:57:52.202Z,1520672272.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:57:52.602Z,1520672272.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:57:52.999Z,1520672272.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:57:53.399Z,1520672273.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:57:53.794Z,1520672273.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:57:54.196Z,1520672274.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:57:54.608Z,1520672274.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:57:55.001Z,1520672275.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:57:55.409Z,1520672275.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:57:55.797Z,1520672275.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:57:56.199Z,1520672276.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:57:56.598Z,1520672276.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:57:56.997Z,1520672276.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:57:57.400Z,1520672277.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:57:57.809Z,1520672277.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:57:58.213Z,1520672278.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:57:58.605Z,1520672278.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:57:58.996Z,1520672278.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:57:59.408Z,1520672279.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:57:59.851Z,1520672279.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:58:00.217Z,1520672280.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:58:00.612Z,1520672280.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:58:01.006Z,1520672281.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:58:01.406Z,1520672281.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:58:01.800Z,1520672281.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:58:02.196Z,1520672282.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:58:02.596Z,1520672282.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:58:02.996Z,1520672282.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:58:03.396Z,1520672283.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:58:03.805Z,1520672283.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:58:04.206Z,1520672284.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:58:04.606Z,1520672284.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:58:04.996Z,1520672284.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:58:05.396Z,1520672285.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:58:05.801Z,1520672285.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:58:06.205Z,1520672286.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:58:06.606Z,1520672286.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:58:07.013Z,1520672287.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:58:07.406Z,1520672287.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:58:07.801Z,1520672287.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:58:08.209Z,1520672288.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:58:08.600Z,1520672288.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:58:09.007Z,1520672289.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:58:09.405Z,1520672289.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:58:09.806Z,1520672289.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:58:10.206Z,1520672290.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:58:10.613Z,1520672290.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:58:10.998Z,1520672290.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:58:11.407Z,1520672291.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:58:11.817Z,1520672291.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:58:12.245Z,1520672292.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:58:12.611Z,1520672292.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:58:13.010Z,1520672293.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:58:13.417Z,1520672293.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:58:13.803Z,1520672293.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:58:14.208Z,1520672294.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:58:14.601Z,1520672294.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:58:15.006Z,1520672295.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:58:15.401Z,1520672295.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:58:15.814Z,1520672295.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:58:18.899Z,1520672298.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:58:19.056Z,1520672299.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:58:19.369Z,1520672299.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:58:19.783Z,1520672299.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:58:20.173Z,1520672300.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:58:20.579Z,1520672300.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:58:20.974Z,1520672300.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:58:21.375Z,1520672301.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:58:21.802Z,1520672301.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:58:22.172Z,1520672302.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:58:22.568Z,1520672302.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:58:22.977Z,1520672302.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:58:23.373Z,1520672303.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:58:23.779Z,1520672303.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:58:24.181Z,1520672304.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:58:24.627Z,1520672304.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:58:24.985Z,1520672304.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:58:25.373Z,1520672305.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:58:25.768Z,1520672305.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:58:26.172Z,1520672306.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:58:26.578Z,1520672306.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:58:26.981Z,1520672306.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:58:27.381Z,1520672307.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:58:27.771Z,1520672307.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:58:28.170Z,1520672308.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:58:28.579Z,1520672308.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:58:28.981Z,1520672308.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:58:29.373Z,1520672309.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:58:29.778Z,1520672309.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:58:30.181Z,1520672310.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:58:30.588Z,1520672310.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:58:30.969Z,1520672310.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:58:31.371Z,1520672311.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:58:31.785Z,1520672311.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:58:32.177Z,1520672312.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:58:32.578Z,1520672312.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:58:32.993Z,1520672312.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:58:33.385Z,1520672313.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:58:33.772Z,1520672313.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:58:34.173Z,1520672314.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:58:34.574Z,1520672314.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:58:34.977Z,1520672314.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:58:35.373Z,1520672315.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:58:35.779Z,1520672315.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:58:36.182Z,1520672316.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:58:36.590Z,1520672316.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:58:36.984Z,1520672316.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:58:37.380Z,1520672317.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:58:37.797Z,1520672317.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:58:38.173Z,1520672318.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:58:38.578Z,1520672318.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:58:38.983Z,1520672318.983 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:58:38.984Z,1520672318.984 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 74
2018-03-10T08:58:38.984Z,1520672318.984 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-03-10T08:58:38.985Z,1520672318.985 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:58:38.985Z,1520672318.985 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 74
2018-03-10T08:58:38.985Z,1520672318.985 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-03-10T08:58:38.988Z,1520672318.988 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:58:38.988Z,1520672318.988 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 74
2018-03-10T08:58:38.988Z,1520672318.988 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-10T08:58:38.000Z,1520672319.000 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-03-10T08:58:39.000Z,1520672319.000 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-03-10T08:58:39.000Z,1520672319.000 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-10T08:58:39.397Z,1520672319.397 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-03-10T08:58:39.397Z,1520672319.397 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 74
2018-03-10T08:58:39.398Z,1520672319.398 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-03-10T08:58:39.398Z,1520672319.398 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 74
2018-03-10T08:58:39.398Z,1520672319.398 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-10T08:58:39.398Z,1520672319.398 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 74
2018-03-10T08:58:39.778Z,1520672319.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-03-10T08:58:39.778Z,1520672319.778 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-03-10T08:58:39.779Z,1520672319.779 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-03-10T08:58:39.779Z,1520672319.779 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-03-10T08:58:39.780Z,1520672319.780 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-03-10T08:58:39.780Z,1520672319.780 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-03-10T08:58:39.780Z,1520672319.780 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-10T08:58:39.781Z,1520672319.781 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-10T08:58:39.781Z,1520672319.781 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-10T08:58:40.186Z,1520672320.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-03-10T08:58:40.187Z,1520672320.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:58:40.573Z,1520672320.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-03-10T08:58:40.574Z,1520672320.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:58:40.984Z,1520672320.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-03-10T08:58:40.985Z,1520672320.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:58:41.361Z,1520672321.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-03-10T08:58:41.362Z,1520672321.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:58:41.786Z,1520672321.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-03-10T08:58:41.787Z,1520672321.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:58:42.185Z,1520672322.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-03-10T08:58:42.186Z,1520672322.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:58:42.588Z,1520672322.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-03-10T08:58:42.589Z,1520672322.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:58:42.964Z,1520672322.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-03-10T08:58:42.965Z,1520672322.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:58:43.367Z,1520672323.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-03-10T08:58:43.368Z,1520672323.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:58:43.769Z,1520672323.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-03-10T08:58:43.770Z,1520672323.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:58:44.169Z,1520672324.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-03-10T08:58:44.170Z,1520672324.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:58:44.596Z,1520672324.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-03-10T08:58:44.597Z,1520672324.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:58:44.975Z,1520672324.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-03-10T08:58:44.976Z,1520672324.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:58:45.370Z,1520672325.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-03-10T08:58:45.371Z,1520672325.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:58:45.770Z,1520672325.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-03-10T08:58:45.771Z,1520672325.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:58:46.170Z,1520672326.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-03-10T08:58:46.171Z,1520672326.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:58:46.570Z,1520672326.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-03-10T08:58:46.571Z,1520672326.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:58:46.976Z,1520672326.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-03-10T08:58:46.977Z,1520672326.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:58:47.370Z,1520672327.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-03-10T08:58:47.371Z,1520672327.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:58:47.770Z,1520672327.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-03-10T08:58:47.771Z,1520672327.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:58:48.175Z,1520672328.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-03-10T08:58:48.176Z,1520672328.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:58:48.582Z,1520672328.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-03-10T08:58:48.600Z,1520672328.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:58:48.975Z,1520672328.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-03-10T08:58:48.976Z,1520672328.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:58:49.381Z,1520672329.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-03-10T08:58:49.382Z,1520672329.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:58:49.774Z,1520672329.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-03-10T08:58:49.775Z,1520672329.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:58:50.173Z,1520672330.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-03-10T08:58:50.174Z,1520672330.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:58:50.606Z,1520672330.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-03-10T08:58:50.607Z,1520672330.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:58:50.982Z,1520672330.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-03-10T08:58:50.983Z,1520672330.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:58:51.388Z,1520672331.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-03-10T08:58:51.389Z,1520672331.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:58:51.770Z,1520672331.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-03-10T08:58:51.772Z,1520672331.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:58:52.174Z,1520672332.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-03-10T08:58:52.175Z,1520672332.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:58:52.572Z,1520672332.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-03-10T08:58:52.573Z,1520672332.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:58:52.973Z,1520672332.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-03-10T08:58:52.974Z,1520672332.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:58:53.372Z,1520672333.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-03-10T08:58:53.373Z,1520672333.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:58:53.788Z,1520672333.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-03-10T08:58:53.789Z,1520672333.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:58:54.181Z,1520672334.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-03-10T08:58:54.182Z,1520672334.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:58:54.588Z,1520672334.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-03-10T08:58:54.589Z,1520672334.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:58:54.970Z,1520672334.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-03-10T08:58:54.972Z,1520672334.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:58:55.377Z,1520672335.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-03-10T08:58:55.378Z,1520672335.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:58:55.773Z,1520672335.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-03-10T08:58:55.774Z,1520672335.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:58:56.181Z,1520672336.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-03-10T08:58:56.182Z,1520672336.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:58:56.587Z,1520672336.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-03-10T08:58:56.588Z,1520672336.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:58:56.983Z,1520672336.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-03-10T08:58:56.984Z,1520672336.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:58:57.382Z,1520672337.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2018-03-10T08:58:57.383Z,1520672337.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:58:57.778Z,1520672337.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2018-03-10T08:58:57.780Z,1520672337.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:58:58.184Z,1520672338.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2018-03-10T08:58:58.185Z,1520672338.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:58:58.578Z,1520672338.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2018-03-10T08:58:58.580Z,1520672338.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:58:58.983Z,1520672338.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 20.0 s old, using for 20.0 s.
2018-03-10T08:58:58.984Z,1520672338.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:58:59.372Z,1520672339.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:58:59.785Z,1520672339.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:59:00.189Z,1520672340.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:59:00.592Z,1520672340.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:59:00.961Z,1520672340.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:59:01.386Z,1520672341.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:59:01.789Z,1520672341.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:59:02.169Z,1520672342.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:59:02.609Z,1520672342.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:59:02.995Z,1520672342.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:59:03.396Z,1520672343.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:59:03.770Z,1520672343.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:59:04.169Z,1520672344.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:59:04.565Z,1520672344.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:59:04.967Z,1520672344.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:59:05.368Z,1520672345.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:59:05.797Z,1520672345.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:59:06.174Z,1520672346.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:59:06.598Z,1520672346.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:59:06.973Z,1520672346.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:59:07.373Z,1520672347.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:59:07.770Z,1520672347.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:59:08.169Z,1520672348.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:59:08.596Z,1520672348.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:59:08.970Z,1520672348.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:59:09.396Z,1520672349.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:59:09.777Z,1520672349.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:59:10.169Z,1520672350.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:59:10.570Z,1520672350.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:59:10.973Z,1520672350.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:59:11.369Z,1520672351.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:59:11.796Z,1520672351.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:59:12.196Z,1520672352.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:59:12.575Z,1520672352.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:59:12.970Z,1520672352.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:59:13.370Z,1520672353.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:59:13.777Z,1520672353.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:59:14.176Z,1520672354.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:59:14.598Z,1520672354.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:59:14.976Z,1520672354.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:59:15.402Z,1520672355.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:59:15.768Z,1520672355.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:59:16.173Z,1520672356.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:59:19.269Z,1520672359.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:59:19.401Z,1520672359.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:59:19.764Z,1520672359.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:59:20.161Z,1520672360.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:59:20.560Z,1520672360.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:59:20.954Z,1520672360.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:59:21.333Z,1520672361.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:59:21.750Z,1520672361.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:59:22.134Z,1520672362.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:59:22.569Z,1520672362.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:59:22.969Z,1520672362.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:59:23.365Z,1520672363.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:59:23.741Z,1520672363.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:59:24.145Z,1520672364.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:59:24.540Z,1520672364.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:59:24.944Z,1520672364.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:59:25.342Z,1520672365.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:59:25.771Z,1520672365.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:59:26.169Z,1520672366.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:59:26.567Z,1520672366.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:59:26.948Z,1520672366.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:59:27.375Z,1520672367.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:59:27.749Z,1520672367.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:59:28.161Z,1520672368.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:59:28.551Z,1520672368.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:59:28.951Z,1520672368.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:59:29.349Z,1520672369.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:59:29.746Z,1520672369.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:59:30.140Z,1520672370.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:59:30.541Z,1520672370.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:59:30.946Z,1520672370.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:59:31.345Z,1520672371.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:59:31.757Z,1520672371.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:59:32.150Z,1520672372.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:59:32.550Z,1520672372.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:59:32.949Z,1520672372.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:59:33.345Z,1520672373.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:59:33.745Z,1520672373.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:59:34.144Z,1520672374.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:59:34.551Z,1520672374.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:59:34.950Z,1520672374.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:59:35.356Z,1520672375.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:59:35.742Z,1520672375.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:59:36.140Z,1520672376.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:59:36.545Z,1520672376.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:59:36.946Z,1520672376.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:59:37.341Z,1520672377.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:59:37.756Z,1520672377.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:59:38.150Z,1520672378.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:59:38.549Z,1520672378.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:59:38.940Z,1520672378.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:59:39.357Z,1520672379.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:59:39.785Z,1520672379.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:59:40.164Z,1520672380.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:59:40.555Z,1520672380.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:59:40.961Z,1520672380.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:59:41.360Z,1520672381.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:59:41.745Z,1520672381.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:59:42.145Z,1520672382.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:59:42.546Z,1520672382.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:59:42.947Z,1520672382.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:59:43.341Z,1520672383.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:59:43.750Z,1520672383.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:59:44.160Z,1520672384.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:59:44.560Z,1520672384.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:59:44.949Z,1520672384.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:59:45.346Z,1520672385.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:59:45.745Z,1520672385.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:59:46.149Z,1520672386.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:59:46.549Z,1520672386.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:59:46.961Z,1520672386.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:59:47.360Z,1520672387.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:59:47.747Z,1520672387.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:59:48.141Z,1520672388.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:59:48.555Z,1520672388.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:59:48.971Z,1520672388.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:59:49.356Z,1520672389.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:59:49.776Z,1520672389.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:59:50.169Z,1520672390.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:59:50.561Z,1520672390.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:59:50.964Z,1520672390.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:59:51.356Z,1520672391.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:59:51.769Z,1520672391.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:59:52.235Z,1520672392.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:59:52.586Z,1520672392.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:59:52.963Z,1520672392.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:59:53.369Z,1520672393.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:59:53.759Z,1520672393.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:59:54.149Z,1520672394.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:59:54.553Z,1520672394.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:59:54.952Z,1520672394.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:59:55.351Z,1520672395.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:59:55.756Z,1520672395.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:59:56.159Z,1520672396.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:59:56.555Z,1520672396.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:59:56.952Z,1520672396.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:59:57.352Z,1520672397.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:59:57.751Z,1520672397.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:59:58.153Z,1520672398.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:59:58.559Z,1520672398.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:59:58.958Z,1520672398.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:59:59.356Z,1520672399.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T08:59:59.757Z,1520672399.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:00:00.132Z,1520672400.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:00:00.537Z,1520672400.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:00:00.937Z,1520672400.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:00:01.339Z,1520672401.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:00:01.760Z,1520672401.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:00:02.162Z,1520672402.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:00:02.561Z,1520672402.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:00:02.941Z,1520672402.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:00:03.335Z,1520672403.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:00:03.741Z,1520672403.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:00:04.144Z,1520672404.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:00:04.597Z,1520672404.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:00:04.997Z,1520672404.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:00:05.369Z,1520672405.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:00:05.742Z,1520672405.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:00:06.141Z,1520672406.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:00:06.541Z,1520672406.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:00:06.941Z,1520672406.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:00:07.341Z,1520672407.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:00:07.776Z,1520672407.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:00:08.146Z,1520672408.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:00:08.571Z,1520672408.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:00:08.943Z,1520672408.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:00:09.344Z,1520672409.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:00:09.743Z,1520672409.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:00:10.152Z,1520672410.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:00:10.546Z,1520672410.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:00:10.950Z,1520672410.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:00:11.357Z,1520672411.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:00:11.740Z,1520672411.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:00:12.145Z,1520672412.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:00:12.543Z,1520672412.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:00:12.942Z,1520672412.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:00:13.345Z,1520672413.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:00:13.761Z,1520672413.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:00:14.162Z,1520672414.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:00:14.561Z,1520672414.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:00:14.945Z,1520672414.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:00:15.345Z,1520672415.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:00:15.742Z,1520672415.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:00:16.140Z,1520672416.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:00:16.551Z,1520672416.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:00:19.664Z,1520672419.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:00:19.841Z,1520672419.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:00:20.165Z,1520672420.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:00:20.561Z,1520672420.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:00:20.965Z,1520672420.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:00:21.364Z,1520672421.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:00:21.767Z,1520672421.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:00:22.171Z,1520672422.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:00:22.572Z,1520672422.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:00:22.957Z,1520672422.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:00:23.360Z,1520672423.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:00:23.762Z,1520672423.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:00:24.163Z,1520672424.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:00:24.566Z,1520672424.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:00:24.972Z,1520672424.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:00:25.365Z,1520672425.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:00:25.764Z,1520672425.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:00:26.160Z,1520672426.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:00:26.558Z,1520672426.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:00:26.960Z,1520672426.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:00:27.360Z,1520672427.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:00:27.768Z,1520672427.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:00:28.170Z,1520672428.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:00:28.570Z,1520672428.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:00:28.963Z,1520672428.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:00:29.363Z,1520672429.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:00:29.762Z,1520672429.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:00:30.162Z,1520672430.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:00:30.573Z,1520672430.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:00:30.970Z,1520672430.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:00:31.373Z,1520672431.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:00:31.763Z,1520672431.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:00:32.170Z,1520672432.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:00:32.571Z,1520672432.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:00:32.993Z,1520672432.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:00:33.365Z,1520672433.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:00:33.773Z,1520672433.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:00:34.170Z,1520672434.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:00:34.570Z,1520672434.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:00:34.965Z,1520672434.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:00:35.361Z,1520672435.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:00:35.763Z,1520672435.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:00:36.168Z,1520672436.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:00:36.577Z,1520672436.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:00:36.970Z,1520672436.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:00:37.370Z,1520672437.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:00:37.760Z,1520672437.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:00:38.161Z,1520672438.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:00:38.559Z,1520672438.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:00:38.962Z,1520672438.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:00:39.361Z,1520672439.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:00:39.768Z,1520672439.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:00:40.177Z,1520672440.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:00:40.571Z,1520672440.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:00:40.962Z,1520672440.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:00:41.362Z,1520672441.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:00:41.773Z,1520672441.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:00:42.168Z,1520672442.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:00:42.577Z,1520672442.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:00:42.973Z,1520672442.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:00:43.376Z,1520672443.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:00:43.765Z,1520672443.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:00:44.164Z,1520672444.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:00:44.569Z,1520672444.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:00:44.963Z,1520672444.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:00:45.411Z,1520672445.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:00:45.781Z,1520672445.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:00:46.185Z,1520672446.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:00:46.581Z,1520672446.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:00:46.974Z,1520672446.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:00:47.376Z,1520672447.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:00:47.781Z,1520672447.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:00:48.153Z,1520672448.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:00:48.579Z,1520672448.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:00:48.989Z,1520672448.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:00:49.385Z,1520672449.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:00:49.746Z,1520672449.746 [BPC1](ERROR): Failed to receive battery data
2018-03-10T09:00:49.746Z,1520672449.746 [BPC1] Communications Fault, FailCount= 1
2018-03-10T09:00:49.746Z,1520672449.746 [BPC1](ERROR): Communications Fault
2018-03-10T09:00:49.762Z,1520672449.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:00:49.792Z,1520672449.792 [CBIT](ERROR): Communications Fault in component: BPC1
2018-03-10T09:00:50.162Z,1520672450.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:00:50.562Z,1520672450.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:00:50.956Z,1520672450.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:00:50.969Z,1520672450.969 [CBIT](INFO): Clearing failed state for component BPC1
2018-03-10T09:00:50.969Z,1520672450.969 [BPC1] No Fault, FailCount= 1
2018-03-10T09:00:51.434Z,1520672451.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:00:51.793Z,1520672451.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:00:52.162Z,1520672452.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:00:52.574Z,1520672452.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:00:52.963Z,1520672452.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:00:53.362Z,1520672453.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:00:53.763Z,1520672453.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:00:54.163Z,1520672454.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:00:54.566Z,1520672454.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:00:54.966Z,1520672454.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:00:55.367Z,1520672455.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:00:55.762Z,1520672455.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:00:56.162Z,1520672456.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:00:56.565Z,1520672456.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:00:56.956Z,1520672456.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:00:57.361Z,1520672457.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:00:57.767Z,1520672457.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:00:58.165Z,1520672458.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:00:58.567Z,1520672458.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:00:58.963Z,1520672458.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:00:59.363Z,1520672459.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:00:59.762Z,1520672459.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:01:00.156Z,1520672460.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:01:00.566Z,1520672460.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:01:00.970Z,1520672460.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:01:01.373Z,1520672461.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:01:01.762Z,1520672461.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:01:02.162Z,1520672462.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:01:02.563Z,1520672462.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:01:02.960Z,1520672462.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:01:03.362Z,1520672463.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:01:03.767Z,1520672463.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:01:04.165Z,1520672464.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:01:04.566Z,1520672464.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:01:04.959Z,1520672464.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:01:05.357Z,1520672465.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:01:05.762Z,1520672465.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:01:06.164Z,1520672466.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:01:06.565Z,1520672466.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:01:06.977Z,1520672466.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:01:07.367Z,1520672467.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:01:07.763Z,1520672467.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:01:08.163Z,1520672468.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:01:08.565Z,1520672468.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:01:08.964Z,1520672468.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:01:09.360Z,1520672469.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:01:09.765Z,1520672469.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:01:10.173Z,1520672470.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:01:10.596Z,1520672470.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:01:10.964Z,1520672470.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:01:11.362Z,1520672471.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:01:11.765Z,1520672471.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:01:12.164Z,1520672472.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:01:12.566Z,1520672472.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:01:12.973Z,1520672472.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:01:13.367Z,1520672473.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:01:13.763Z,1520672473.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:01:14.162Z,1520672474.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:01:14.563Z,1520672474.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:01:14.957Z,1520672474.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:01:15.370Z,1520672475.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:01:15.766Z,1520672475.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:01:16.165Z,1520672476.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:01:16.168Z,1520672476.168 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-03-10T08:56:15.8Z
2018-03-10T09:01:16.168Z,1520672476.168 [Default:CheckIn:Read_GPS] Stopped
2018-03-10T09:01:16.168Z,1520672476.168 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-03-10T09:01:16.566Z,1520672476.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:01:19.774Z,1520672479.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:01:19.904Z,1520672479.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:01:20.223Z,1520672480.223 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20180310T051512/Courier0088.lzma
2018-03-10T09:01:20.301Z,1520672480.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:01:20.701Z,1520672480.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:01:21.017Z,1520672481.017 [DataOverHttps](INFO): Moved sent file to Logs/20180310T051512/Courier0088.lzma.bak
2018-03-10T09:01:21.017Z,1520672481.017 [DataOverHttps](INFO): SBD MOMSN=8003335
2018-03-10T09:01:21.100Z,1520672481.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:01:21.752Z,1520672481.752 [BPC1](FAULT): Failed to initialize
2018-03-10T09:01:21.752Z,1520672481.752 [BPC1] Communications Fault, FailCount= 2
2018-03-10T09:01:21.752Z,1520672481.752 [BPC1](ERROR): Communications Fault
2018-03-10T09:01:21.759Z,1520672481.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:01:21.772Z,1520672481.772 [CBIT](ERROR): Communications Fault in component: BPC1
2018-03-10T09:01:21.901Z,1520672481.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:01:24.000Z,1520672485.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:01:25.133Z,1520672485.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:01:25.146Z,1520672485.146 [CBIT](INFO): Clearing failed state for component BPC1
2018-03-10T09:01:25.146Z,1520672485.146 [BPC1] No Fault, FailCount= 2
2018-03-10T09:01:25.596Z,1520672485.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:01:25.929Z,1520672485.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:01:26.327Z,1520672486.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:01:26.726Z,1520672486.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:01:27.108Z,1520672487.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:01:30.240Z,1520672490.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:01:30.380Z,1520672490.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:01:30.676Z,1520672490.676 [DataOverHttps](INFO): Sending 170 bytes from file Logs/20180310T051512/Express0089.lzma
2018-03-10T09:01:30.741Z,1520672490.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:01:31.113Z,1520672491.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:01:31.465Z,1520672491.465 [DataOverHttps](INFO): Moved sent file to Logs/20180310T051512/Express0089.lzma.bak
2018-03-10T09:01:31.465Z,1520672491.465 [DataOverHttps](INFO): SBD MOMSN=8003337
2018-03-10T09:01:31.531Z,1520672491.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:01:32.196Z,1520672492.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:01:32.199Z,1520672492.199 [Default:CheckIn:Read_Iridium] Stopped
2018-03-10T09:01:32.199Z,1520672492.199 [Default:CheckIn:C.Wait] Running Loop=1
2018-03-10T09:01:32.200Z,1520672492.200 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-03-10T09:01:32.324Z,1520672492.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:01:32.729Z,1520672492.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:01:35.807Z,1520672495.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:01:35.931Z,1520672495.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:01:36.298Z,1520672496.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:01:36.709Z,1520672496.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:01:37.075Z,1520672497.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:01:37.482Z,1520672497.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:01:37.915Z,1520672497.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:01:38.308Z,1520672498.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:01:38.681Z,1520672498.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:01:39.080Z,1520672499.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:01:39.501Z,1520672499.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:01:39.909Z,1520672499.909 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:01:39.909Z,1520672499.909 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 75
2018-03-10T09:01:39.909Z,1520672499.909 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-03-10T09:01:39.910Z,1520672499.910 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:01:39.912Z,1520672499.912 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 75
2018-03-10T09:01:39.912Z,1520672499.912 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-03-10T09:01:39.913Z,1520672499.913 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:01:39.913Z,1520672499.913 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 75
2018-03-10T09:01:39.913Z,1520672499.913 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-10T09:01:39.926Z,1520672499.926 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-03-10T09:01:39.926Z,1520672499.926 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-03-10T09:01:39.926Z,1520672499.926 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-10T09:01:40.307Z,1520672500.307 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-03-10T09:01:40.307Z,1520672500.307 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 75
2018-03-10T09:01:40.308Z,1520672500.308 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-03-10T09:01:40.308Z,1520672500.308 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 75
2018-03-10T09:01:40.308Z,1520672500.308 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-10T09:01:40.308Z,1520672500.308 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 75
2018-03-10T09:01:40.680Z,1520672500.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-03-10T09:01:40.681Z,1520672500.681 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-03-10T09:01:40.681Z,1520672500.681 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-03-10T09:01:40.682Z,1520672500.682 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-03-10T09:01:40.682Z,1520672500.682 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-03-10T09:01:40.682Z,1520672500.682 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-03-10T09:01:40.683Z,1520672500.683 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-10T09:01:40.683Z,1520672500.683 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-10T09:01:40.684Z,1520672500.684 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-10T09:01:41.093Z,1520672501.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-03-10T09:01:41.094Z,1520672501.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:01:41.488Z,1520672501.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-03-10T09:01:41.489Z,1520672501.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:01:41.892Z,1520672501.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-03-10T09:01:41.893Z,1520672501.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:01:42.292Z,1520672502.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-03-10T09:01:42.293Z,1520672502.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:01:42.698Z,1520672502.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-03-10T09:01:42.699Z,1520672502.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:01:43.096Z,1520672503.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-03-10T09:01:43.097Z,1520672503.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:01:43.496Z,1520672503.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-03-10T09:01:43.497Z,1520672503.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:01:43.896Z,1520672503.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-03-10T09:01:43.897Z,1520672503.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:01:44.289Z,1520672504.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-03-10T09:01:44.290Z,1520672504.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:01:44.688Z,1520672504.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-03-10T09:01:44.689Z,1520672504.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:01:45.083Z,1520672505.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-03-10T09:01:45.084Z,1520672505.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:01:45.492Z,1520672505.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-03-10T09:01:45.493Z,1520672505.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:01:45.891Z,1520672505.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-03-10T09:01:45.892Z,1520672505.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:01:46.293Z,1520672506.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-03-10T09:01:46.294Z,1520672506.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:01:46.679Z,1520672506.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-03-10T09:01:46.680Z,1520672506.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:01:47.077Z,1520672507.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-03-10T09:01:47.078Z,1520672507.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:01:47.489Z,1520672507.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-03-10T09:01:47.490Z,1520672507.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:01:47.886Z,1520672507.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-03-10T09:01:47.887Z,1520672507.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:01:48.289Z,1520672508.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-03-10T09:01:48.290Z,1520672508.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:01:48.678Z,1520672508.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-03-10T09:01:48.679Z,1520672508.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:01:49.092Z,1520672509.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-03-10T09:01:49.093Z,1520672509.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:01:49.496Z,1520672509.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-03-10T09:01:49.497Z,1520672509.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:01:49.892Z,1520672509.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-03-10T09:01:49.892Z,1520672509.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:01:50.296Z,1520672510.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-03-10T09:01:50.297Z,1520672510.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:01:50.700Z,1520672510.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-03-10T09:01:50.701Z,1520672510.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:01:51.100Z,1520672511.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-03-10T09:01:51.101Z,1520672511.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:01:51.486Z,1520672511.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-03-10T09:01:51.487Z,1520672511.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:01:51.896Z,1520672511.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-03-10T09:01:51.897Z,1520672511.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:01:52.300Z,1520672512.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-03-10T09:01:52.301Z,1520672512.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:01:52.683Z,1520672512.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-03-10T09:01:52.684Z,1520672512.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:01:53.079Z,1520672513.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-03-10T09:01:53.080Z,1520672513.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:01:53.489Z,1520672513.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-03-10T09:01:53.490Z,1520672513.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:01:53.900Z,1520672513.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-03-10T09:01:53.901Z,1520672513.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:01:54.312Z,1520672514.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-03-10T09:01:54.313Z,1520672514.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:01:54.680Z,1520672514.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-03-10T09:01:54.681Z,1520672514.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:01:55.078Z,1520672515.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-03-10T09:01:55.079Z,1520672515.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:01:55.496Z,1520672515.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-03-10T09:01:55.497Z,1520672515.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:01:55.886Z,1520672515.886 [BPC1](FAULT): Failed to initialize
2018-03-10T09:01:55.886Z,1520672515.886 [BPC1] Communications Fault, FailCount= 3
2018-03-10T09:01:55.886Z,1520672515.886 [BPC1](ERROR): Communications Fault
2018-03-10T09:01:55.893Z,1520672515.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-03-10T09:01:55.894Z,1520672515.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:01:55.935Z,1520672515.935 [CBIT](ERROR): Communications Fault in component: BPC1
2018-03-10T09:01:56.284Z,1520672516.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-03-10T09:01:56.285Z,1520672516.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:01:56.687Z,1520672516.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-03-10T09:01:56.688Z,1520672516.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:01:57.084Z,1520672517.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-03-10T09:01:57.084Z,1520672517.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:01:57.097Z,1520672517.097 [CBIT](INFO): Clearing failed state for component BPC1
2018-03-10T09:01:57.097Z,1520672517.097 [BPC1] No Fault, FailCount= 3
2018-03-10T09:01:57.544Z,1520672517.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-03-10T09:01:57.545Z,1520672517.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:01:57.894Z,1520672517.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-03-10T09:01:57.895Z,1520672517.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:01:58.299Z,1520672518.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2018-03-10T09:01:58.300Z,1520672518.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:01:58.694Z,1520672518.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2018-03-10T09:01:58.695Z,1520672518.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:01:59.091Z,1520672519.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2018-03-10T09:01:59.092Z,1520672519.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:01:59.500Z,1520672519.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2018-03-10T09:01:59.501Z,1520672519.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:01:59.902Z,1520672519.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 20.0 s old, using for 20.0 s.
2018-03-10T09:01:59.903Z,1520672519.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:02:00.291Z,1520672520.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:02:00.689Z,1520672520.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:02:01.085Z,1520672521.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:02:01.482Z,1520672521.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:02:01.890Z,1520672521.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:02:02.285Z,1520672522.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:02:02.672Z,1520672522.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:02:03.074Z,1520672523.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:02:03.493Z,1520672523.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:02:03.897Z,1520672523.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:02:04.283Z,1520672524.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:02:04.705Z,1520672524.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:02:05.086Z,1520672525.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:02:05.485Z,1520672525.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:02:05.901Z,1520672525.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:02:06.294Z,1520672526.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:02:06.693Z,1520672526.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:02:07.085Z,1520672527.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:02:07.497Z,1520672527.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:02:07.895Z,1520672527.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:02:08.301Z,1520672528.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:02:08.687Z,1520672528.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:02:09.079Z,1520672529.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:02:09.488Z,1520672529.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:02:09.893Z,1520672529.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:02:10.303Z,1520672530.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:02:10.680Z,1520672530.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:02:11.086Z,1520672531.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:02:11.494Z,1520672531.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:02:11.896Z,1520672531.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:02:12.297Z,1520672532.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:02:12.685Z,1520672532.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:02:13.086Z,1520672533.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:02:13.501Z,1520672533.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:02:13.897Z,1520672533.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:02:14.305Z,1520672534.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:02:14.700Z,1520672534.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:02:15.072Z,1520672535.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:02:15.496Z,1520672535.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:02:15.901Z,1520672535.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:02:16.302Z,1520672536.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:02:16.680Z,1520672536.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:02:17.080Z,1520672537.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:02:17.509Z,1520672537.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:02:17.901Z,1520672537.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:02:18.285Z,1520672538.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:02:18.679Z,1520672538.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:02:19.074Z,1520672539.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:02:19.504Z,1520672539.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:02:19.884Z,1520672539.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:02:20.306Z,1520672540.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:02:20.696Z,1520672540.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:02:21.104Z,1520672541.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:02:21.501Z,1520672541.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:02:21.884Z,1520672541.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:02:22.303Z,1520672542.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:02:22.700Z,1520672542.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:02:23.100Z,1520672543.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:02:23.506Z,1520672543.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:02:23.896Z,1520672543.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:02:24.303Z,1520672544.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:02:24.680Z,1520672544.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:02:25.074Z,1520672545.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:02:25.480Z,1520672545.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:02:25.916Z,1520672545.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:02:26.303Z,1520672546.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:02:26.678Z,1520672546.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:02:27.080Z,1520672547.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:02:27.500Z,1520672547.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:02:27.891Z,1520672547.891 [BPC1](FAULT): Failed to initialize
2018-03-10T09:02:27.891Z,1520672547.891 [BPC1] Communications Fault, FailCount= 4
2018-03-10T09:02:27.891Z,1520672547.891 [BPC1](ERROR): Communications Fault
2018-03-10T09:02:27.908Z,1520672547.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:02:27.921Z,1520672547.921 [CBIT](ERROR): Communications Fault in component: BPC1
2018-03-10T09:02:28.305Z,1520672548.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:02:28.681Z,1520672548.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:02:29.100Z,1520672549.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:02:29.113Z,1520672549.113 [CBIT](INFO): Clearing failed state for component BPC1
2018-03-10T09:02:29.113Z,1520672549.113 [BPC1] No Fault, FailCount= 4
2018-03-10T09:02:29.557Z,1520672549.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:02:29.880Z,1520672549.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:02:30.305Z,1520672550.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:02:30.704Z,1520672550.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:02:31.099Z,1520672551.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:02:31.500Z,1520672551.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:02:31.904Z,1520672551.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:02:32.303Z,1520672552.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:02:32.681Z,1520672552.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:02:35.767Z,1520672555.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:02:35.905Z,1520672555.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:02:36.277Z,1520672556.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:02:36.662Z,1520672556.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:02:37.032Z,1520672557.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:02:37.433Z,1520672557.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:02:37.841Z,1520672557.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:02:38.234Z,1520672558.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:02:38.646Z,1520672558.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:02:39.043Z,1520672559.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:02:39.469Z,1520672559.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:02:39.848Z,1520672559.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:02:40.241Z,1520672560.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:02:40.632Z,1520672560.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:02:41.038Z,1520672561.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:02:41.438Z,1520672561.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:02:41.843Z,1520672561.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:02:42.247Z,1520672562.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:02:42.647Z,1520672562.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:02:43.039Z,1520672563.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:02:43.445Z,1520672563.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:02:43.842Z,1520672563.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:02:44.232Z,1520672564.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:02:44.646Z,1520672564.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:02:45.075Z,1520672565.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:02:45.442Z,1520672565.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:02:45.845Z,1520672565.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:02:46.246Z,1520672566.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:02:46.642Z,1520672566.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:02:47.053Z,1520672567.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:02:47.484Z,1520672567.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:02:47.851Z,1520672567.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:02:48.253Z,1520672568.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:02:48.651Z,1520672568.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:02:49.039Z,1520672569.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:02:49.444Z,1520672569.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:02:49.845Z,1520672569.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:02:50.240Z,1520672570.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:02:50.649Z,1520672570.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:02:51.057Z,1520672571.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:02:51.457Z,1520672571.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:02:51.842Z,1520672571.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:02:52.241Z,1520672572.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:02:52.651Z,1520672572.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:02:53.049Z,1520672573.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:02:53.440Z,1520672573.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:02:53.857Z,1520672573.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:02:54.256Z,1520672574.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:02:54.662Z,1520672574.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:02:55.040Z,1520672575.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:02:55.444Z,1520672575.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:02:55.852Z,1520672575.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:02:56.240Z,1520672576.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:02:56.648Z,1520672576.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:02:57.056Z,1520672577.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:02:57.454Z,1520672577.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:02:57.841Z,1520672577.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:02:58.243Z,1520672578.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:02:58.641Z,1520672578.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:02:59.054Z,1520672579.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:02:59.446Z,1520672579.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:02:59.878Z,1520672579.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:03:00.252Z,1520672580.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:03:00.655Z,1520672580.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:03:01.041Z,1520672581.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:03:01.439Z,1520672581.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:03:01.856Z,1520672581.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:03:02.244Z,1520672582.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:03:02.646Z,1520672582.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:03:03.050Z,1520672583.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:03:03.460Z,1520672583.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:03:03.844Z,1520672583.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:03:04.249Z,1520672584.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:03:04.663Z,1520672584.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:03:05.042Z,1520672585.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:03:05.441Z,1520672585.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:03:05.851Z,1520672585.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:03:06.251Z,1520672586.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:03:06.653Z,1520672586.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:03:07.045Z,1520672587.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:03:07.437Z,1520672587.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:03:07.849Z,1520672587.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:03:08.242Z,1520672588.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:03:08.651Z,1520672588.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:03:09.055Z,1520672589.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:03:09.446Z,1520672589.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:03:09.842Z,1520672589.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:03:10.236Z,1520672590.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:03:10.646Z,1520672590.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:03:11.041Z,1520672591.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:03:11.428Z,1520672591.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:03:11.869Z,1520672591.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:03:12.284Z,1520672592.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:03:12.663Z,1520672592.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:03:13.059Z,1520672593.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:03:13.457Z,1520672593.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:03:13.837Z,1520672593.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:03:14.235Z,1520672594.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:03:14.666Z,1520672594.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:03:15.073Z,1520672595.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:03:15.467Z,1520672595.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:03:15.847Z,1520672595.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:03:16.245Z,1520672596.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:03:16.643Z,1520672596.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:03:17.045Z,1520672597.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:03:17.445Z,1520672597.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:03:17.846Z,1520672597.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:03:18.242Z,1520672598.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:03:18.641Z,1520672598.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:03:19.040Z,1520672599.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:03:19.439Z,1520672599.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:03:19.844Z,1520672599.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:03:20.253Z,1520672600.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:03:20.647Z,1520672600.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:03:21.047Z,1520672601.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:03:21.437Z,1520672601.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:03:21.850Z,1520672601.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:03:22.244Z,1520672602.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:03:22.640Z,1520672602.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:03:23.051Z,1520672603.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:03:23.447Z,1520672603.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:03:23.847Z,1520672603.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:03:24.247Z,1520672604.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:03:24.651Z,1520672604.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:03:25.042Z,1520672605.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:03:25.444Z,1520672605.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:03:25.856Z,1520672605.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:03:26.252Z,1520672606.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:03:26.657Z,1520672606.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:03:27.068Z,1520672607.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:03:27.442Z,1520672607.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:03:27.845Z,1520672607.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:03:28.242Z,1520672608.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:03:28.641Z,1520672608.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:03:29.054Z,1520672609.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:03:29.455Z,1520672609.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:03:29.849Z,1520672609.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:03:30.248Z,1520672610.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:03:30.647Z,1520672610.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:03:31.048Z,1520672611.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:03:31.444Z,1520672611.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:03:31.848Z,1520672611.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:03:32.256Z,1520672612.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:03:32.658Z,1520672612.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:03:33.087Z,1520672613.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:03:36.165Z,1520672616.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:03:36.294Z,1520672616.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:03:36.700Z,1520672616.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:03:37.097Z,1520672617.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:03:37.493Z,1520672617.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:03:37.861Z,1520672617.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:03:38.268Z,1520672618.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:03:38.693Z,1520672618.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:03:39.076Z,1520672619.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:03:39.496Z,1520672619.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:03:39.873Z,1520672619.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:03:40.264Z,1520672620.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:03:40.662Z,1520672620.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:03:41.088Z,1520672621.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:03:41.469Z,1520672621.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:03:41.873Z,1520672621.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:03:42.281Z,1520672622.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:03:42.683Z,1520672622.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:03:43.061Z,1520672623.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:03:43.467Z,1520672623.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:03:43.869Z,1520672623.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:03:44.282Z,1520672624.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:03:44.713Z,1520672624.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:03:45.107Z,1520672625.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:03:45.476Z,1520672625.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:03:45.885Z,1520672625.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:03:46.274Z,1520672626.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:03:46.666Z,1520672626.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:03:47.071Z,1520672627.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:03:47.481Z,1520672627.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:03:47.913Z,1520672627.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:03:48.273Z,1520672628.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:03:48.687Z,1520672628.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:03:49.077Z,1520672629.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:03:49.483Z,1520672629.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:03:49.901Z,1520672629.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:03:50.281Z,1520672630.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:03:50.676Z,1520672630.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:03:51.082Z,1520672631.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:03:51.480Z,1520672631.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:03:51.879Z,1520672631.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:03:52.270Z,1520672632.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:03:52.649Z,1520672632.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:03:53.062Z,1520672633.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:03:53.457Z,1520672633.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:03:53.881Z,1520672633.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:03:54.282Z,1520672634.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:03:54.689Z,1520672634.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:03:55.065Z,1520672635.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:03:55.461Z,1520672635.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:03:55.853Z,1520672635.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:03:56.265Z,1520672636.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:03:56.659Z,1520672636.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:03:57.088Z,1520672637.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:03:57.472Z,1520672637.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:03:57.866Z,1520672637.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:03:58.261Z,1520672638.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:03:58.686Z,1520672638.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:03:59.059Z,1520672639.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:03:59.468Z,1520672639.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:03:59.869Z,1520672639.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:04:00.292Z,1520672640.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:04:00.665Z,1520672640.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:04:01.061Z,1520672641.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:04:01.459Z,1520672641.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:04:01.876Z,1520672641.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:04:02.257Z,1520672642.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:04:02.669Z,1520672642.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:04:03.069Z,1520672643.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:04:03.482Z,1520672643.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:04:03.866Z,1520672643.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:04:04.255Z,1520672644.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:04:04.689Z,1520672644.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:04:05.069Z,1520672645.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:04:05.450Z,1520672645.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:04:05.860Z,1520672645.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:04:06.273Z,1520672646.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:04:06.690Z,1520672646.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:04:07.075Z,1520672647.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:04:07.479Z,1520672647.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:04:07.868Z,1520672647.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:04:08.289Z,1520672648.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:04:08.679Z,1520672648.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:04:09.084Z,1520672649.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:04:09.469Z,1520672649.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:04:09.875Z,1520672649.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:04:10.264Z,1520672650.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:04:10.670Z,1520672650.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:04:11.075Z,1520672651.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:04:11.501Z,1520672651.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:04:11.916Z,1520672651.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:04:12.281Z,1520672652.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:04:12.689Z,1520672652.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:04:13.082Z,1520672653.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:04:13.473Z,1520672653.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:04:13.851Z,1520672653.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:04:14.279Z,1520672654.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:04:14.701Z,1520672654.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:04:15.122Z,1520672655.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:04:15.476Z,1520672655.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:04:15.857Z,1520672655.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:04:16.283Z,1520672656.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:04:16.649Z,1520672656.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:04:17.080Z,1520672657.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:04:17.483Z,1520672657.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:04:17.885Z,1520672657.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:04:18.279Z,1520672658.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:04:18.660Z,1520672658.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:04:19.056Z,1520672659.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:04:19.459Z,1520672659.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:04:19.857Z,1520672659.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:04:20.285Z,1520672660.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:04:20.684Z,1520672660.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:04:21.085Z,1520672661.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:04:21.458Z,1520672661.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:04:21.859Z,1520672661.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:04:22.264Z,1520672662.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:04:22.683Z,1520672662.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:04:23.086Z,1520672663.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:04:23.483Z,1520672663.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:04:24.008Z,1520672664.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:04:24.289Z,1520672664.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:04:24.655Z,1520672664.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:04:25.061Z,1520672665.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:04:25.458Z,1520672665.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:04:25.887Z,1520672665.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:04:26.266Z,1520672666.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:04:26.666Z,1520672666.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:04:27.096Z,1520672667.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:04:27.482Z,1520672667.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:04:27.855Z,1520672667.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:04:28.273Z,1520672668.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:04:28.655Z,1520672668.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:04:29.062Z,1520672669.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:04:29.466Z,1520672669.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:04:29.879Z,1520672669.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:04:30.260Z,1520672670.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:04:30.692Z,1520672670.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:04:31.057Z,1520672671.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:04:31.465Z,1520672671.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:04:31.862Z,1520672671.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:04:32.288Z,1520672672.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:04:32.687Z,1520672672.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:04:33.087Z,1520672673.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:04:36.167Z,1520672676.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:04:36.313Z,1520672676.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:04:36.672Z,1520672676.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:04:37.093Z,1520672677.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:04:37.473Z,1520672677.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:04:37.864Z,1520672677.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:04:38.262Z,1520672678.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:04:38.676Z,1520672678.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:04:39.073Z,1520672679.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:04:39.479Z,1520672679.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:04:39.885Z,1520672679.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:04:40.280Z,1520672680.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:04:40.664Z,1520672680.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:04:41.067Z,1520672681.067 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:04:41.067Z,1520672681.067 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 76
2018-03-10T09:04:41.067Z,1520672681.067 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-03-10T09:04:41.069Z,1520672681.069 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:04:41.069Z,1520672681.069 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 76
2018-03-10T09:04:41.069Z,1520672681.069 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-03-10T09:04:41.071Z,1520672681.071 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:04:41.071Z,1520672681.071 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 76
2018-03-10T09:04:41.071Z,1520672681.071 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-10T09:04:41.083Z,1520672681.083 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-03-10T09:04:41.083Z,1520672681.083 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-03-10T09:04:41.083Z,1520672681.083 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-10T09:04:41.490Z,1520672681.490 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-03-10T09:04:41.490Z,1520672681.490 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 76
2018-03-10T09:04:41.490Z,1520672681.490 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-03-10T09:04:41.490Z,1520672681.490 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 76
2018-03-10T09:04:41.499Z,1520672681.499 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-10T09:04:41.499Z,1520672681.499 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 76
2018-03-10T09:04:41.888Z,1520672681.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-03-10T09:04:41.888Z,1520672681.888 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-03-10T09:04:41.888Z,1520672681.888 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-03-10T09:04:41.889Z,1520672681.889 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-03-10T09:04:41.889Z,1520672681.889 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-03-10T09:04:41.889Z,1520672681.889 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-03-10T09:04:41.890Z,1520672681.890 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-10T09:04:41.890Z,1520672681.890 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-10T09:04:41.911Z,1520672681.911 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-10T09:04:42.274Z,1520672682.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-03-10T09:04:42.275Z,1520672682.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:04:42.684Z,1520672682.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-03-10T09:04:42.685Z,1520672682.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:04:43.067Z,1520672683.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-03-10T09:04:43.068Z,1520672683.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:04:43.469Z,1520672683.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-03-10T09:04:43.470Z,1520672683.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:04:43.866Z,1520672683.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-03-10T09:04:43.871Z,1520672683.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:04:44.277Z,1520672684.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-03-10T09:04:44.278Z,1520672684.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:04:44.680Z,1520672684.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-03-10T09:04:44.681Z,1520672684.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:04:45.088Z,1520672685.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-03-10T09:04:45.089Z,1520672685.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:04:45.471Z,1520672685.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-03-10T09:04:45.472Z,1520672685.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:04:45.875Z,1520672685.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-03-10T09:04:45.876Z,1520672685.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:04:46.269Z,1520672686.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-03-10T09:04:46.270Z,1520672686.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:04:46.652Z,1520672686.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-03-10T09:04:46.653Z,1520672686.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:04:47.084Z,1520672687.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-03-10T09:04:47.085Z,1520672687.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:04:47.496Z,1520672687.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-03-10T09:04:47.497Z,1520672687.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:04:47.885Z,1520672687.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-03-10T09:04:47.886Z,1520672687.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:04:48.279Z,1520672688.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-03-10T09:04:48.280Z,1520672688.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:04:48.656Z,1520672688.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-03-10T09:04:48.657Z,1520672688.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:04:49.059Z,1520672689.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-03-10T09:04:49.060Z,1520672689.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:04:49.463Z,1520672689.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-03-10T09:04:49.464Z,1520672689.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:04:49.870Z,1520672689.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-03-10T09:04:49.892Z,1520672689.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:04:50.266Z,1520672690.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-03-10T09:04:50.268Z,1520672690.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:04:50.666Z,1520672690.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-03-10T09:04:50.668Z,1520672690.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:04:51.063Z,1520672691.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-03-10T09:04:51.064Z,1520672691.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:04:51.487Z,1520672691.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-03-10T09:04:51.488Z,1520672691.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:04:51.872Z,1520672691.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-03-10T09:04:51.873Z,1520672691.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:04:52.277Z,1520672692.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-03-10T09:04:52.277Z,1520672692.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:04:52.658Z,1520672692.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-03-10T09:04:52.659Z,1520672692.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:04:53.088Z,1520672693.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-03-10T09:04:53.089Z,1520672693.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:04:53.469Z,1520672693.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-03-10T09:04:53.470Z,1520672693.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:04:53.869Z,1520672693.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-03-10T09:04:53.870Z,1520672693.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:04:54.262Z,1520672694.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-03-10T09:04:54.264Z,1520672694.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:04:54.665Z,1520672694.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-03-10T09:04:54.666Z,1520672694.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:04:55.064Z,1520672695.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-03-10T09:04:55.066Z,1520672695.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:04:55.462Z,1520672695.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-03-10T09:04:55.463Z,1520672695.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:04:55.862Z,1520672695.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-03-10T09:04:55.863Z,1520672695.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:04:56.289Z,1520672696.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-03-10T09:04:56.290Z,1520672696.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:04:56.669Z,1520672696.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-03-10T09:04:56.670Z,1520672696.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:04:57.068Z,1520672697.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-03-10T09:04:57.069Z,1520672697.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:04:57.458Z,1520672697.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-03-10T09:04:57.458Z,1520672697.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:04:57.875Z,1520672697.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-03-10T09:04:57.877Z,1520672697.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:04:58.257Z,1520672698.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-03-10T09:04:58.258Z,1520672698.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:04:58.656Z,1520672698.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-03-10T09:04:58.657Z,1520672698.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:04:59.074Z,1520672699.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-03-10T09:04:59.075Z,1520672699.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:04:59.494Z,1520672699.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2018-03-10T09:04:59.495Z,1520672699.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:04:59.873Z,1520672699.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2018-03-10T09:04:59.874Z,1520672699.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:05:00.263Z,1520672700.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2018-03-10T09:05:00.264Z,1520672700.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:05:00.663Z,1520672700.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2018-03-10T09:05:00.664Z,1520672700.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:05:01.082Z,1520672701.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:05:01.462Z,1520672701.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:05:01.864Z,1520672701.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:05:02.273Z,1520672702.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:05:02.693Z,1520672702.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:05:03.074Z,1520672703.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:05:03.465Z,1520672703.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:05:03.863Z,1520672703.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:05:04.264Z,1520672704.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:05:04.709Z,1520672704.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:05:05.093Z,1520672705.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:05:05.476Z,1520672705.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:05:05.894Z,1520672705.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:05:06.259Z,1520672706.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:05:06.671Z,1520672706.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:05:07.064Z,1520672707.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:05:07.480Z,1520672707.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:05:07.873Z,1520672707.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:05:08.277Z,1520672708.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:05:08.681Z,1520672708.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:05:09.100Z,1520672709.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:05:09.461Z,1520672709.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:05:09.869Z,1520672709.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:05:10.273Z,1520672710.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:05:10.701Z,1520672710.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:05:11.073Z,1520672711.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:05:11.480Z,1520672711.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:05:11.875Z,1520672711.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:05:12.285Z,1520672712.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:05:12.690Z,1520672712.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:05:13.091Z,1520672713.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:05:13.492Z,1520672713.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:05:13.904Z,1520672713.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:05:14.288Z,1520672714.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:05:14.692Z,1520672714.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:05:15.059Z,1520672715.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:05:15.488Z,1520672715.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:05:15.879Z,1520672715.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:05:16.260Z,1520672716.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:05:16.694Z,1520672716.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:05:17.101Z,1520672717.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:05:17.490Z,1520672717.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:05:17.866Z,1520672717.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:05:18.263Z,1520672718.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:05:18.685Z,1520672718.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:05:19.068Z,1520672719.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:05:19.464Z,1520672719.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:05:19.865Z,1520672719.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:05:20.235Z,1520672720.235 [NAL9602](INFO): GPS fix at 20180310T090442: (21.315533, -157.877241)
2018-03-10T09:05:27.877Z,1520672727.877 [CBIT](DEBUG): EFC running - data check-sum false
2018-03-10T09:05:52.900Z,1520672752.900 [NAL9602](INFO): Powering down
2018-03-10T09:06:32.550Z,1520672792.550 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-03-10T09:06:32.550Z,1520672792.550 [Default:CheckIn:C.Wait] Stopped
2018-03-10T09:06:32.550Z,1520672792.550 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-03-10T09:06:32.550Z,1520672792.550 [Default:CheckIn:D] Running Loop=1
2018-03-10T09:06:32.937Z,1520672792.937 [Default:CheckIn:D] Stopped
2018-03-10T09:06:32.937Z,1520672792.937 [Default:CheckIn:E] Running Loop=1
2018-03-10T09:06:33.330Z,1520672793.330 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 227.250277 min 
2018-03-10T09:06:33.330Z,1520672793.330 [Default:CheckIn:E] Stopped
2018-03-10T09:06:33.330Z,1520672793.330 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-03-10T09:06:33.330Z,1520672793.330 [Default:CheckIn] Stopped
2018-03-10T09:06:33.330Z,1520672793.330 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-03-10T09:06:33.331Z,1520672793.331 [Default:CheckIn](INFO): Running loop #23
2018-03-10T09:06:33.331Z,1520672793.331 [Default:CheckIn] Running Loop=23
2018-03-10T09:06:33.331Z,1520672793.331 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-03-10T09:06:33.331Z,1520672793.331 [Default:CheckIn:Read_GPS] Running Loop=1
2018-03-10T09:06:36.845Z,1520672796.845 [NAL9602](INFO): Powering up
2018-03-10T09:06:47.740Z,1520672807.740 [NAL9602](INFO): NAL9602 initialized
2018-03-10T09:07:09.797Z,1520672829.797 [BPC1](ERROR): Bank A: No match for stick 0 serial number:1717 in the onboard configuration file.
2018-03-10T09:07:09.798Z,1520672829.798 [BPC1](ERROR): Failed to parse Bank A battery data
2018-03-10T09:07:09.798Z,1520672829.798 [BPC1] Data Fault, FailCount= 1
2018-03-10T09:07:09.798Z,1520672829.798 [BPC1](ERROR): Data Fault
2018-03-10T09:07:09.854Z,1520672829.854 [CBIT](ERROR): Data Fault in component: BPC1
2018-03-10T09:07:11.009Z,1520672831.009 [CBIT](INFO): Clearing failed state for component BPC1
2018-03-10T09:07:11.009Z,1520672831.009 [BPC1] No Fault, FailCount= 1
2018-03-10T09:07:28.145Z,1520672848.145 [NAL9602](INFO): SBD MO Status=2, MOMSN=5834, MT Status=2, MTMSN=0
2018-03-10T09:07:28.146Z,1520672848.146 [NAL9602](ERROR): Failed to initiate SBD session. Error code: 2
2018-03-10T09:07:42.036Z,1520672862.036 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:07:42.036Z,1520672862.036 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 1
2018-03-10T09:07:42.036Z,1520672862.036 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-10T09:07:42.049Z,1520672862.049 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-10T09:07:42.407Z,1520672862.407 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-10T09:07:42.407Z,1520672862.407 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 1
2018-03-10T09:07:42.804Z,1520672862.804 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-10T09:07:42.805Z,1520672862.805 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-10T09:07:42.805Z,1520672862.805 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-10T09:09:04.417Z,1520672944.417 [NAL9602](INFO): SBD MO Status=2, MOMSN=5834, MT Status=2, MTMSN=0
2018-03-10T09:09:04.418Z,1520672944.418 [NAL9602](ERROR): Failed to initiate SBD session. Error code: 2
2018-03-10T09:09:25.217Z,1520672965.217 [NAL9602](INFO): SBD MO Status=2, MOMSN=5834, MT Status=2, MTMSN=0
2018-03-10T09:09:25.218Z,1520672965.218 [NAL9602](ERROR): Failed to initiate SBD session. Error code: 2
2018-03-10T09:09:43.017Z,1520672983.017 [NAL9602](INFO): SBD MO Status=0, MOMSN=5834, MT Status=0, MTMSN=0
2018-03-10T09:09:43.018Z,1520672983.018 [NAL9602](INFO): No messages in MT queue
2018-03-10T09:09:44.224Z,1520672984.224 [NAL9602](INFO): GPS fix at 20180310T090906: (21.315657, -157.877274)
2018-03-10T09:09:44.304Z,1520672984.304 [Default:CheckIn:Read_GPS] Stopped
2018-03-10T09:09:44.304Z,1520672984.304 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-03-10T09:09:54.579Z,1520672994.579 [DataOverHttps](INFO): Sending 212 bytes from file Logs/20180310T051512/Courier0092.lzma
2018-03-10T09:09:55.618Z,1520672995.618 [DataOverHttps](INFO): Moved sent file to Logs/20180310T051512/Courier0092.lzma.bak
2018-03-10T09:09:55.618Z,1520672995.618 [DataOverHttps](INFO): SBD MOMSN=8003410
2018-03-10T09:10:05.304Z,1520673005.304 [DataOverHttps](INFO): Sending 291 bytes from file Logs/20180310T051512/Express0093.lzma
2018-03-10T09:10:06.113Z,1520673006.113 [DataOverHttps](INFO): Moved sent file to Logs/20180310T051512/Express0093.lzma.bak
2018-03-10T09:10:06.113Z,1520673006.113 [DataOverHttps](INFO): SBD MOMSN=8003415
2018-03-10T09:10:06.842Z,1520673006.842 [Default:CheckIn:Read_Iridium] Stopped
2018-03-10T09:10:06.842Z,1520673006.842 [Default:CheckIn:C.Wait] Running Loop=1
2018-03-10T09:10:06.842Z,1520673006.842 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-03-10T09:10:20.568Z,1520673020.568 [NAL9602](INFO): Powering down
2018-03-10T09:10:24.993Z,1520673024.993 [BPC1](ERROR): Failed to receive battery data
2018-03-10T09:10:24.993Z,1520673024.993 [BPC1] Communications Fault, FailCount= 1
2018-03-10T09:10:24.993Z,1520673024.993 [BPC1](ERROR): Communications Fault
2018-03-10T09:10:25.055Z,1520673025.055 [CBIT](ERROR): Communications Fault in component: BPC1
2018-03-10T09:10:26.245Z,1520673026.245 [CBIT](INFO): Clearing failed state for component BPC1
2018-03-10T09:10:26.245Z,1520673026.245 [BPC1] No Fault, FailCount= 1
2018-03-10T09:10:43.011Z,1520673043.011 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:10:43.011Z,1520673043.011 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 1
2018-03-10T09:10:43.011Z,1520673043.011 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-10T09:10:43.024Z,1520673043.024 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-10T09:10:43.432Z,1520673043.432 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-10T09:10:43.432Z,1520673043.432 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 1
2018-03-10T09:10:43.810Z,1520673043.810 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-10T09:10:43.811Z,1520673043.811 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-10T09:10:43.811Z,1520673043.811 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-10T09:10:57.001Z,1520673057.001 [BPC1](FAULT): Failed to initialize
2018-03-10T09:10:57.001Z,1520673057.001 [BPC1] Communications Fault, FailCount= 2
2018-03-10T09:10:57.001Z,1520673057.001 [BPC1](ERROR): Communications Fault
2018-03-10T09:10:57.023Z,1520673057.023 [CBIT](ERROR): Communications Fault in component: BPC1
2018-03-10T09:10:58.259Z,1520673058.259 [CBIT](INFO): Clearing failed state for component BPC1
2018-03-10T09:10:58.259Z,1520673058.259 [BPC1] No Fault, FailCount= 2
2018-03-10T09:11:28.706Z,1520673088.706 [BPC1](FAULT): Failed to initialize
2018-03-10T09:11:28.706Z,1520673088.706 [BPC1] Communications Fault, FailCount= 3
2018-03-10T09:11:28.706Z,1520673088.706 [BPC1](ERROR): Communications Fault
2018-03-10T09:11:28.757Z,1520673088.757 [CBIT](ERROR): Communications Fault in component: BPC1
2018-03-10T09:11:29.963Z,1520673089.963 [CBIT](INFO): Clearing failed state for component BPC1
2018-03-10T09:11:29.963Z,1520673089.963 [BPC1] No Fault, FailCount= 3
2018-03-10T09:12:00.704Z,1520673120.704 [BPC1](FAULT): Failed to initialize
2018-03-10T09:12:00.704Z,1520673120.704 [BPC1] Communications Fault, FailCount= 4
2018-03-10T09:12:00.704Z,1520673120.704 [BPC1](ERROR): Communications Fault
2018-03-10T09:12:00.778Z,1520673120.778 [CBIT](ERROR): Communications Fault in component: BPC1
2018-03-10T09:12:01.956Z,1520673121.956 [CBIT](INFO): Clearing failed state for component BPC1
2018-03-10T09:12:01.956Z,1520673121.956 [BPC1] No Fault, FailCount= 4
2018-03-10T09:13:44.014Z,1520673224.014 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:13:44.014Z,1520673224.014 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 2
2018-03-10T09:13:44.014Z,1520673224.014 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-10T09:13:44.026Z,1520673224.026 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-10T09:13:44.429Z,1520673224.429 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-10T09:13:44.429Z,1520673224.429 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 2
2018-03-10T09:13:44.817Z,1520673224.817 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-10T09:13:44.818Z,1520673224.818 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-10T09:13:44.818Z,1520673224.818 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-10T09:15:07.373Z,1520673307.373 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-03-10T09:15:07.373Z,1520673307.373 [Default:CheckIn:C.Wait] Stopped
2018-03-10T09:15:07.373Z,1520673307.373 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-03-10T09:15:07.373Z,1520673307.373 [Default:CheckIn:D] Running Loop=1
2018-03-10T09:15:07.781Z,1520673307.781 [Default:CheckIn:D] Stopped
2018-03-10T09:15:07.781Z,1520673307.781 [Default:CheckIn:E] Running Loop=1
2018-03-10T09:15:11.026Z,1520673311.026 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 235.831006 min 
2018-03-10T09:15:11.027Z,1520673311.027 [Default:CheckIn:E] Stopped
2018-03-10T09:15:11.027Z,1520673311.027 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-03-10T09:15:11.027Z,1520673311.027 [Default:CheckIn] Stopped
2018-03-10T09:15:11.027Z,1520673311.027 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-03-10T09:15:11.027Z,1520673311.027 [Default:CheckIn](INFO): Running loop #24
2018-03-10T09:15:11.027Z,1520673311.027 [Default:CheckIn] Running Loop=24
2018-03-10T09:15:11.027Z,1520673311.027 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-03-10T09:15:11.027Z,1520673311.027 [Default:CheckIn:Read_GPS] Running Loop=1
2018-03-10T09:15:11.484Z,1520673311.484 [NAL9602](INFO): Powering up
2018-03-10T09:15:22.680Z,1520673322.680 [NAL9602](INFO): NAL9602 initialized
2018-03-10T09:15:27.960Z,1520673327.960 [CBIT](DEBUG): EFC running - data check-sum false
2018-03-10T09:15:53.879Z,1520673353.879 [NAL9602](INFO): SBD MO Status=2, MOMSN=5835, MT Status=2, MTMSN=0
2018-03-10T09:15:53.879Z,1520673353.879 [NAL9602](ERROR): Failed to initiate SBD session. Error code: 2
2018-03-10T09:16:44.902Z,1520673404.902 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:16:44.902Z,1520673404.902 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 3
2018-03-10T09:16:44.902Z,1520673404.902 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-10T09:16:44.915Z,1520673404.915 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-10T09:16:45.313Z,1520673405.313 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-10T09:16:45.313Z,1520673405.313 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 3
2018-03-10T09:16:45.703Z,1520673405.703 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-10T09:16:45.704Z,1520673405.704 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-10T09:16:45.704Z,1520673405.704 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-10T09:16:48.453Z,1520673408.453 [NAL9602](INFO): SBD MO Status=2, MOMSN=5835, MT Status=2, MTMSN=0
2018-03-10T09:16:48.453Z,1520673408.453 [NAL9602](ERROR): Failed to initiate SBD session. Error code: 2
2018-03-10T09:17:07.250Z,1520673427.250 [NAL9602](INFO): SBD MO Status=2, MOMSN=5835, MT Status=2, MTMSN=0
2018-03-10T09:17:07.250Z,1520673427.250 [NAL9602](ERROR): Failed to initiate SBD session. Error code: 2
2018-03-10T09:17:16.581Z,1520673436.581 [NAL9602](INFO): SBD MO Status=0, MOMSN=5835, MT Status=0, MTMSN=0
2018-03-10T09:17:16.582Z,1520673436.582 [NAL9602](INFO): No messages in MT queue
2018-03-10T09:17:16.582Z,1520673436.582 [NAL9602](INFO): Failure count cleared after critical for NAL9602
2018-03-10T09:19:29.260Z,1520673569.260 [BPC1](ERROR): Bank B: No match for stick 0 serial number:1717 in the onboard configuration file.
2018-03-10T09:19:29.260Z,1520673569.260 [BPC1](ERROR): Failed to parse Bank B battery data
2018-03-10T09:19:29.260Z,1520673569.260 [BPC1] Data Fault, FailCount= 1
2018-03-10T09:19:29.260Z,1520673569.260 [BPC1](ERROR): Data Fault
2018-03-10T09:19:29.309Z,1520673569.309 [CBIT](ERROR): Data Fault in component: BPC1
2018-03-10T09:19:30.486Z,1520673570.486 [CBIT](INFO): Clearing failed state for component BPC1
2018-03-10T09:19:30.486Z,1520673570.486 [BPC1] No Fault, FailCount= 1
2018-03-10T09:19:46.072Z,1520673586.072 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:19:46.072Z,1520673586.072 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 4
2018-03-10T09:19:46.072Z,1520673586.072 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-10T09:19:46.085Z,1520673586.085 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-10T09:19:46.478Z,1520673586.478 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-10T09:19:46.478Z,1520673586.478 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 4
2018-03-10T09:19:46.872Z,1520673586.872 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-10T09:19:46.872Z,1520673586.872 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-10T09:19:46.873Z,1520673586.873 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-10T09:20:06.067Z,1520673606.067 [BPC1](ERROR): Failed to receive battery data
2018-03-10T09:20:06.067Z,1520673606.067 [BPC1] Communications Fault, FailCount= 2
2018-03-10T09:20:06.067Z,1520673606.067 [BPC1](ERROR): Communications Fault
2018-03-10T09:20:06.090Z,1520673606.090 [CBIT](ERROR): Communications Fault in component: BPC1
2018-03-10T09:20:07.292Z,1520673607.292 [CBIT](INFO): Clearing failed state for component BPC1
2018-03-10T09:20:07.292Z,1520673607.292 [BPC1] No Fault, FailCount= 2
2018-03-10T09:20:11.696Z,1520673611.696 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-03-10T09:15:11.0Z
2018-03-10T09:20:11.696Z,1520673611.696 [Default:CheckIn:Read_GPS] Stopped
2018-03-10T09:20:11.696Z,1520673611.696 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-03-10T09:20:12.269Z,1520673612.269 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20180310T051512/Courier0096.lzma
2018-03-10T09:20:12.929Z,1520673612.929 [DataOverHttps](INFO): Moved sent file to Logs/20180310T051512/Courier0096.lzma.bak
2018-03-10T09:20:12.929Z,1520673612.929 [DataOverHttps](INFO): SBD MOMSN=8003500
2018-03-10T09:20:23.295Z,1520673623.295 [DataOverHttps](INFO): Sending 157 bytes from file Logs/20180310T051512/Express0097.lzma
2018-03-10T09:20:24.093Z,1520673624.093 [DataOverHttps](INFO): Moved sent file to Logs/20180310T051512/Express0097.lzma.bak
2018-03-10T09:20:24.093Z,1520673624.093 [DataOverHttps](INFO): SBD MOMSN=8003502
2018-03-10T09:20:24.833Z,1520673624.833 [Default:CheckIn:Read_Iridium] Stopped
2018-03-10T09:20:24.833Z,1520673624.833 [Default:CheckIn:C.Wait] Running Loop=1
2018-03-10T09:20:24.833Z,1520673624.833 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-03-10T09:20:37.842Z,1520673637.842 [BPC1](FAULT): Failed to initialize
2018-03-10T09:20:37.842Z,1520673637.842 [BPC1] Communications Fault, FailCount= 3
2018-03-10T09:20:37.842Z,1520673637.842 [BPC1](ERROR): Communications Fault
2018-03-10T09:20:37.903Z,1520673637.903 [CBIT](ERROR): Communications Fault in component: BPC1
2018-03-10T09:20:39.062Z,1520673639.062 [CBIT](INFO): Clearing failed state for component BPC1
2018-03-10T09:20:39.062Z,1520673639.062 [BPC1] No Fault, FailCount= 3
2018-03-10T09:20:43.804Z,1520673643.804 [NAL9602](INFO): Powering down
2018-03-10T09:21:09.838Z,1520673669.838 [BPC1](FAULT): Failed to initialize
2018-03-10T09:21:09.838Z,1520673669.838 [BPC1] Communications Fault, FailCount= 4
2018-03-10T09:21:09.838Z,1520673669.838 [BPC1](ERROR): Communications Fault
2018-03-10T09:21:09.889Z,1520673669.889 [CBIT](ERROR): Communications Fault in component: BPC1
2018-03-10T09:21:11.090Z,1520673671.090 [CBIT](INFO): Clearing failed state for component BPC1
2018-03-10T09:21:11.090Z,1520673671.090 [BPC1] No Fault, FailCount= 4
2018-03-10T09:21:41.551Z,1520673701.551 [BPC1](FAULT): Failed to initialize
2018-03-10T09:21:41.551Z,1520673701.551 [BPC1] Communications Fault, FailCount= 5
2018-03-10T09:21:41.551Z,1520673701.551 [BPC1](ERROR): Communications Fault
2018-03-10T09:21:41.573Z,1520673701.573 [CBIT](ERROR): Communications Fault in component: BPC1
2018-03-10T09:21:42.779Z,1520673702.779 [CBIT](INFO): Clearing failed state for component BPC1
2018-03-10T09:21:42.779Z,1520673702.779 [BPC1] No Fault, FailCount= 5
2018-03-10T09:22:47.242Z,1520673767.242 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:22:47.242Z,1520673767.242 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 5
2018-03-10T09:22:47.242Z,1520673767.242 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-10T09:22:47.271Z,1520673767.271 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-10T09:22:47.656Z,1520673767.656 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-10T09:22:47.656Z,1520673767.656 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 5
2018-03-10T09:22:48.039Z,1520673768.039 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-10T09:22:48.039Z,1520673768.039 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-10T09:22:48.040Z,1520673768.040 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-10T09:25:25.192Z,1520673925.192 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-03-10T09:25:25.192Z,1520673925.192 [Default:CheckIn:C.Wait] Stopped
2018-03-10T09:25:25.192Z,1520673925.192 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-03-10T09:25:25.192Z,1520673925.192 [Default:CheckIn:D] Running Loop=1
2018-03-10T09:25:25.618Z,1520673925.618 [Default:CheckIn:D] Stopped
2018-03-10T09:25:25.618Z,1520673925.618 [Default:CheckIn:E] Running Loop=1
2018-03-10T09:25:25.974Z,1520673925.974 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 246.128288 min 
2018-03-10T09:25:25.974Z,1520673925.974 [Default:CheckIn:E] Stopped
2018-03-10T09:25:25.975Z,1520673925.975 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-03-10T09:25:25.975Z,1520673925.975 [Default:CheckIn] Stopped
2018-03-10T09:25:25.975Z,1520673925.975 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-03-10T09:25:25.975Z,1520673925.975 [Default:CheckIn](INFO): Running loop #25
2018-03-10T09:25:25.975Z,1520673925.975 [Default:CheckIn] Running Loop=25
2018-03-10T09:25:25.975Z,1520673925.975 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-03-10T09:25:25.975Z,1520673925.975 [Default:CheckIn:Read_GPS] Running Loop=1
2018-03-10T09:25:29.200Z,1520673929.200 [CBIT](DEBUG): EFC running - data check-sum false
2018-03-10T09:25:29.262Z,1520673929.262 [NAL9602](INFO): Powering up
2018-03-10T09:25:40.420Z,1520673940.420 [NAL9602](INFO): NAL9602 initialized
2018-03-10T09:25:41.214Z,1520673941.214 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-03-10T09:25:41.214Z,1520673941.214 [NAL9602] Data Fault, FailCount= 1
2018-03-10T09:25:41.214Z,1520673941.214 [NAL9602](ERROR): Data Fault
2018-03-10T09:25:41.301Z,1520673941.301 [CBIT](ERROR): Data Fault in component: NAL9602
2018-03-10T09:25:41.616Z,1520673941.616 [NAL9602](INFO): Powering down
2018-03-10T09:25:42.476Z,1520673942.476 [CBIT](INFO): Clearing failed state for component NAL9602
2018-03-10T09:25:42.476Z,1520673942.476 [NAL9602] No Fault, FailCount= 1
2018-03-10T09:25:48.055Z,1520673948.055 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:25:48.055Z,1520673948.055 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 6
2018-03-10T09:25:48.055Z,1520673948.055 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-10T09:25:48.096Z,1520673948.096 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-10T09:25:48.500Z,1520673948.500 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-10T09:25:48.500Z,1520673948.500 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 6
2018-03-10T09:25:48.884Z,1520673948.884 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-10T09:25:48.884Z,1520673948.884 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-10T09:25:48.885Z,1520673948.885 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-10T09:26:12.016Z,1520673972.016 [NAL9602](INFO): Powering up NAL9602
2018-03-10T09:26:23.216Z,1520673983.216 [NAL9602](INFO): NAL9602 initialized
2018-03-10T09:28:48.934Z,1520674128.934 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:28:48.934Z,1520674128.934 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 7
2018-03-10T09:28:48.934Z,1520674128.934 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-10T09:28:48.947Z,1520674128.947 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-10T09:28:49.358Z,1520674129.358 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-10T09:28:49.375Z,1520674129.375 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 7
2018-03-10T09:28:49.752Z,1520674129.752 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-10T09:28:49.752Z,1520674129.752 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-10T09:28:49.752Z,1520674129.752 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-10T09:29:42.214Z,1520674182.214 [BPC1](ERROR): Failed to receive battery data
2018-03-10T09:29:42.214Z,1520674182.214 [BPC1] Communications Fault, FailCount= 1
2018-03-10T09:29:42.214Z,1520674182.214 [BPC1](ERROR): Communications Fault
2018-03-10T09:29:42.244Z,1520674182.244 [CBIT](ERROR): Communications Fault in component: BPC1
2018-03-10T09:29:43.451Z,1520674183.451 [CBIT](INFO): Clearing failed state for component BPC1
2018-03-10T09:29:43.451Z,1520674183.451 [BPC1] No Fault, FailCount= 1
2018-03-10T09:30:14.210Z,1520674214.210 [BPC1](FAULT): Failed to initialize
2018-03-10T09:30:14.210Z,1520674214.210 [BPC1] Communications Fault, FailCount= 2
2018-03-10T09:30:14.210Z,1520674214.210 [BPC1](ERROR): Communications Fault
2018-03-10T09:30:14.233Z,1520674214.233 [CBIT](ERROR): Communications Fault in component: BPC1
2018-03-10T09:30:15.445Z,1520674215.445 [CBIT](INFO): Clearing failed state for component BPC1
2018-03-10T09:30:15.445Z,1520674215.445 [BPC1] No Fault, FailCount= 2
2018-03-10T09:30:26.229Z,1520674226.229 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-03-10T09:25:25.0Z
2018-03-10T09:30:26.229Z,1520674226.229 [Default:CheckIn:Read_GPS] Stopped
2018-03-10T09:30:26.229Z,1520674226.229 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-03-10T09:30:30.527Z,1520674230.527 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20180310T051512/Courier0100.lzma
2018-03-10T09:30:31.313Z,1520674231.313 [DataOverHttps](INFO): Moved sent file to Logs/20180310T051512/Courier0100.lzma.bak
2018-03-10T09:30:31.313Z,1520674231.313 [DataOverHttps](INFO): SBD MOMSN=8003549
2018-03-10T09:30:41.395Z,1520674241.395 [DataOverHttps](INFO): Sending 199 bytes from file Logs/20180310T051512/Express0101.lzma
2018-03-10T09:30:42.193Z,1520674242.193 [DataOverHttps](INFO): Moved sent file to Logs/20180310T051512/Express0101.lzma.bak
2018-03-10T09:30:42.193Z,1520674242.193 [DataOverHttps](INFO): SBD MOMSN=8003551
2018-03-10T09:30:42.951Z,1520674242.951 [Default:CheckIn:Read_Iridium] Stopped
2018-03-10T09:30:42.951Z,1520674242.951 [Default:CheckIn:C.Wait] Running Loop=1
2018-03-10T09:30:42.951Z,1520674242.951 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-03-10T09:30:48.330Z,1520674248.330 [BPC1](FAULT): Failed to initialize
2018-03-10T09:30:48.330Z,1520674248.330 [BPC1] Communications Fault, FailCount= 3
2018-03-10T09:30:48.330Z,1520674248.330 [BPC1](ERROR): Communications Fault
2018-03-10T09:30:48.368Z,1520674248.368 [CBIT](ERROR): Communications Fault in component: BPC1
2018-03-10T09:30:49.253Z,1520674249.253 [CBIT](INFO): Clearing failed state for component BPC1
2018-03-10T09:30:49.253Z,1520674249.253 [BPC1] No Fault, FailCount= 3
2018-03-10T09:31:20.032Z,1520674280.032 [BPC1](FAULT): Failed to initialize
2018-03-10T09:31:20.032Z,1520674280.032 [BPC1] Communications Fault, FailCount= 4
2018-03-10T09:31:20.032Z,1520674280.032 [BPC1](ERROR): Communications Fault
2018-03-10T09:31:20.055Z,1520674280.055 [CBIT](ERROR): Communications Fault in component: BPC1
2018-03-10T09:31:21.266Z,1520674281.266 [CBIT](INFO): Clearing failed state for component BPC1
2018-03-10T09:31:21.266Z,1520674281.266 [BPC1] No Fault, FailCount= 4
2018-03-10T09:31:29.580Z,1520674289.580 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session.
2018-03-10T09:31:50.108Z,1520674310.108 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:31:50.108Z,1520674310.108 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 8
2018-03-10T09:31:50.108Z,1520674310.108 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-10T09:31:50.154Z,1520674310.154 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-10T09:31:50.517Z,1520674310.517 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-10T09:31:50.517Z,1520674310.517 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 8
2018-03-10T09:31:50.904Z,1520674310.904 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-10T09:31:50.905Z,1520674310.905 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-10T09:31:50.905Z,1520674310.905 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-10T09:32:00.064Z,1520674320.064 [NAL9602](INFO): Powering down
2018-03-10T09:34:51.236Z,1520674491.236 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:34:51.236Z,1520674491.236 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 9
2018-03-10T09:34:51.236Z,1520674491.236 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-10T09:34:51.249Z,1520674491.249 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-10T09:34:51.688Z,1520674491.688 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-10T09:34:51.688Z,1520674491.688 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 9
2018-03-10T09:34:52.039Z,1520674492.039 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-10T09:34:52.040Z,1520674492.040 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-10T09:34:52.040Z,1520674492.040 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-10T09:35:29.266Z,1520674529.266 [CBIT](DEBUG): EFC running - data check-sum false
2018-03-10T09:35:43.251Z,1520674543.251 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-03-10T09:35:43.251Z,1520674543.251 [Default:CheckIn:C.Wait] Stopped
2018-03-10T09:35:43.251Z,1520674543.251 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-03-10T09:35:43.251Z,1520674543.251 [Default:CheckIn:D] Running Loop=1
2018-03-10T09:35:43.639Z,1520674543.639 [Default:CheckIn:D] Stopped
2018-03-10T09:35:43.639Z,1520674543.639 [Default:CheckIn:E] Running Loop=1
2018-03-10T09:35:44.048Z,1520674544.048 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 256.428630 min 
2018-03-10T09:35:44.049Z,1520674544.049 [Default:CheckIn:E] Stopped
2018-03-10T09:35:44.049Z,1520674544.049 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-03-10T09:35:44.049Z,1520674544.049 [Default:CheckIn] Stopped
2018-03-10T09:35:44.049Z,1520674544.049 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-03-10T09:35:44.049Z,1520674544.049 [Default:CheckIn](INFO): Running loop #26
2018-03-10T09:35:44.049Z,1520674544.049 [Default:CheckIn] Running Loop=26
2018-03-10T09:35:44.049Z,1520674544.049 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-03-10T09:35:44.050Z,1520674544.050 [Default:CheckIn:Read_GPS] Running Loop=1
2018-03-10T09:35:48.838Z,1520674548.838 [NAL9602](INFO): Powering up
2018-03-10T09:35:59.764Z,1520674559.764 [NAL9602](INFO): NAL9602 initialized
2018-03-10T09:36:31.760Z,1520674591.760 [NAL9602](ERROR): Failed to receive proper response when querying signal strength for MT queue check.
2018-03-10T09:36:31.839Z,1520674591.839 [NAL9602](FAULT): received: 
+CSQ:0

OK35, 0, 0, 0, 0

OK
2018-03-10T09:36:31.839Z,1520674591.839 [NAL9602] Data Fault, FailCount= 2
2018-03-10T09:36:31.839Z,1520674591.839 [NAL9602](ERROR): Data Fault
2018-03-10T09:36:31.929Z,1520674591.929 [CBIT](ERROR): Data Fault in component: NAL9602
2018-03-10T09:36:32.160Z,1520674592.160 [NAL9602](INFO): Powering down
2018-03-10T09:36:33.029Z,1520674593.029 [CBIT](INFO): Clearing failed state for component NAL9602
2018-03-10T09:36:33.029Z,1520674593.029 [NAL9602] No Fault, FailCount= 2
2018-03-10T09:37:02.304Z,1520674622.304 [NAL9602](INFO): Powering up NAL9602
2018-03-10T09:37:13.125Z,1520674633.125 [NAL9602](INFO): NAL9602 initialized
2018-03-10T09:37:13.923Z,1520674633.923 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-03-10T09:37:13.923Z,1520674633.923 [NAL9602] Data Fault, FailCount= 3
2018-03-10T09:37:13.923Z,1520674633.923 [NAL9602](ERROR): Data Fault
2018-03-10T09:37:13.995Z,1520674633.995 [CBIT](ERROR): Data Fault in component: NAL9602
2018-03-10T09:37:14.322Z,1520674634.322 [NAL9602](INFO): Powering down
2018-03-10T09:37:15.165Z,1520674635.165 [CBIT](INFO): Clearing failed state for component NAL9602
2018-03-10T09:37:15.165Z,1520674635.165 [NAL9602] No Fault, FailCount= 3
2018-03-10T09:37:44.721Z,1520674664.721 [NAL9602](INFO): Powering up NAL9602
2018-03-10T09:37:52.196Z,1520674672.196 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:37:52.196Z,1520674672.196 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 10
2018-03-10T09:37:52.197Z,1520674672.197 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-10T09:37:52.209Z,1520674672.209 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-10T09:37:52.604Z,1520674672.604 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-10T09:37:52.604Z,1520674672.604 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 10
2018-03-10T09:37:52.996Z,1520674672.996 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-10T09:37:52.996Z,1520674672.996 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-10T09:37:52.996Z,1520674672.996 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-10T09:37:55.736Z,1520674675.736 [NAL9602](INFO): NAL9602 initialized
2018-03-10T09:39:13.055Z,1520674753.055 [BPC1](ERROR): Bank B: No match for stick 2 serial number:1717 in the onboard configuration file.
2018-03-10T09:39:13.056Z,1520674753.056 [BPC1](ERROR): Failed to parse Bank B battery data
2018-03-10T09:39:13.056Z,1520674753.056 [BPC1] Data Fault, FailCount= 1
2018-03-10T09:39:13.056Z,1520674753.056 [BPC1](ERROR): Data Fault
2018-03-10T09:39:13.129Z,1520674753.129 [CBIT](ERROR): Data Fault in component: BPC1
2018-03-10T09:39:14.266Z,1520674754.266 [CBIT](INFO): Clearing failed state for component BPC1
2018-03-10T09:39:14.266Z,1520674754.266 [BPC1] No Fault, FailCount= 1
2018-03-10T09:39:45.040Z,1520674785.040 [BPC1](FAULT): Failed to initialize
2018-03-10T09:39:45.040Z,1520674785.040 [BPC1] Communications Fault, FailCount= 2
2018-03-10T09:39:45.040Z,1520674785.040 [BPC1](ERROR): Communications Fault
2018-03-10T09:39:45.077Z,1520674785.077 [CBIT](ERROR): Communications Fault in component: BPC1
2018-03-10T09:39:49.938Z,1520674789.938 [CBIT](INFO): Clearing failed state for component BPC1
2018-03-10T09:39:49.938Z,1520674789.938 [BPC1] No Fault, FailCount= 2
2018-03-10T09:40:20.675Z,1520674820.675 [BPC1](FAULT): Failed to initialize
2018-03-10T09:40:20.675Z,1520674820.675 [BPC1] Communications Fault, FailCount= 3
2018-03-10T09:40:20.675Z,1520674820.675 [BPC1](ERROR): Communications Fault
2018-03-10T09:40:20.698Z,1520674820.698 [CBIT](ERROR): Communications Fault in component: BPC1
2018-03-10T09:40:21.915Z,1520674821.915 [CBIT](INFO): Clearing failed state for component BPC1
2018-03-10T09:40:21.915Z,1520674821.915 [BPC1] No Fault, FailCount= 3
2018-03-10T09:40:44.290Z,1520674844.290 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-03-10T09:35:44.0Z
2018-03-10T09:40:44.290Z,1520674844.290 [Default:CheckIn:Read_GPS] Stopped
2018-03-10T09:40:44.290Z,1520674844.290 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-03-10T09:40:48.677Z,1520674848.677 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20180310T051512/Courier0104.lzma
2018-03-10T09:40:49.473Z,1520674849.473 [DataOverHttps](INFO): Moved sent file to Logs/20180310T051512/Courier0104.lzma.bak
2018-03-10T09:40:49.474Z,1520674849.474 [DataOverHttps](INFO): SBD MOMSN=8003602
2018-03-10T09:40:53.995Z,1520674853.995 [BPC1](FAULT): Failed to initialize
2018-03-10T09:40:53.995Z,1520674853.995 [BPC1] Communications Fault, FailCount= 4
2018-03-10T09:40:53.995Z,1520674853.995 [BPC1](ERROR): Communications Fault
2018-03-10T09:40:54.038Z,1520674854.038 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:40:54.038Z,1520674854.038 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 11
2018-03-10T09:40:54.039Z,1520674854.039 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-10T09:40:54.052Z,1520674854.052 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-10T09:40:54.053Z,1520674854.053 [CBIT](ERROR): Communications Fault in component: BPC1
2018-03-10T09:40:54.180Z,1520674854.180 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-10T09:40:54.180Z,1520674854.180 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 11
2018-03-10T09:40:54.544Z,1520674854.544 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-10T09:40:54.544Z,1520674854.544 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-10T09:40:54.544Z,1520674854.544 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-10T09:40:54.949Z,1520674854.949 [CBIT](INFO): Clearing failed state for component BPC1
2018-03-10T09:40:54.949Z,1520674854.949 [BPC1] No Fault, FailCount= 4
2018-03-10T09:40:59.900Z,1520674859.900 [DataOverHttps](INFO): Sending 288 bytes from file Logs/20180310T051512/Express0105.lzma
2018-03-10T09:41:00.702Z,1520674860.702 [DataOverHttps](INFO): Moved sent file to Logs/20180310T051512/Express0105.lzma.bak
2018-03-10T09:41:00.702Z,1520674860.702 [DataOverHttps](INFO): SBD MOMSN=8003604
2018-03-10T09:41:01.438Z,1520674861.438 [Default:CheckIn:Read_Iridium] Stopped
2018-03-10T09:41:01.438Z,1520674861.438 [Default:CheckIn:C.Wait] Running Loop=1
2018-03-10T09:41:01.438Z,1520674861.438 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-03-10T09:41:05.181Z,1520674865.181 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session.
2018-03-10T09:41:35.664Z,1520674895.664 [NAL9602](INFO): Powering down
2018-03-10T09:43:54.646Z,1520675034.646 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:43:54.646Z,1520675034.646 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 12
2018-03-10T09:43:54.646Z,1520675034.646 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-10T09:43:54.658Z,1520675034.658 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-10T09:43:55.093Z,1520675035.093 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-10T09:43:55.093Z,1520675035.093 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 12
2018-03-10T09:43:55.455Z,1520675035.455 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-10T09:43:55.456Z,1520675035.456 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-10T09:43:55.456Z,1520675035.456 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-10T09:45:29.384Z,1520675129.384 [CBIT](DEBUG): EFC running - data check-sum false
2018-03-10T09:46:01.769Z,1520675161.769 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-03-10T09:46:01.769Z,1520675161.769 [Default:CheckIn:C.Wait] Stopped
2018-03-10T09:46:01.769Z,1520675161.769 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-03-10T09:46:01.769Z,1520675161.769 [Default:CheckIn:D] Running Loop=1
2018-03-10T09:46:02.171Z,1520675162.171 [Default:CheckIn:D] Stopped
2018-03-10T09:46:02.171Z,1520675162.171 [Default:CheckIn:E] Running Loop=1
2018-03-10T09:46:02.611Z,1520675162.611 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 266.737500 min 
2018-03-10T09:46:02.611Z,1520675162.611 [Default:CheckIn:E] Stopped
2018-03-10T09:46:02.611Z,1520675162.611 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-03-10T09:46:02.611Z,1520675162.611 [Default:CheckIn] Stopped
2018-03-10T09:46:02.611Z,1520675162.611 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-03-10T09:46:02.611Z,1520675162.611 [Default:CheckIn](INFO): Running loop #27
2018-03-10T09:46:02.611Z,1520675162.611 [Default:CheckIn] Running Loop=27
2018-03-10T09:46:02.612Z,1520675162.612 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-03-10T09:46:02.612Z,1520675162.612 [Default:CheckIn:Read_GPS] Running Loop=1
2018-03-10T09:46:03.320Z,1520675163.320 [NAL9602](INFO): Powering up
2018-03-10T09:46:14.248Z,1520675174.248 [NAL9602](INFO): NAL9602 initialized
2018-03-10T09:46:46.248Z,1520675206.248 [NAL9602](ERROR): Failed to receive proper response when querying signal strength for MT queue check.
2018-03-10T09:46:46.327Z,1520675206.327 [NAL9602](FAULT): received: 
+CSQ:0

OK35, 0, 0, 0, 0

OK
2018-03-10T09:46:46.327Z,1520675206.327 [NAL9602] Data Fault, FailCount= 4
2018-03-10T09:46:46.327Z,1520675206.327 [NAL9602](ERROR): Data Fault
2018-03-10T09:46:46.415Z,1520675206.415 [CBIT](ERROR): Data Fault in component: NAL9602
2018-03-10T09:46:46.644Z,1520675206.644 [NAL9602](INFO): Powering down
2018-03-10T09:46:47.525Z,1520675207.525 [CBIT](INFO): Clearing failed state for component NAL9602
2018-03-10T09:46:47.525Z,1520675207.525 [NAL9602] No Fault, FailCount= 4
2018-03-10T09:46:55.491Z,1520675215.491 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:46:55.491Z,1520675215.491 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 13
2018-03-10T09:46:55.491Z,1520675215.491 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-10T09:46:55.504Z,1520675215.504 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-10T09:46:55.915Z,1520675215.915 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-10T09:46:55.915Z,1520675215.915 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 13
2018-03-10T09:46:56.309Z,1520675216.309 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-10T09:46:56.309Z,1520675216.309 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-10T09:46:56.309Z,1520675216.309 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-10T09:47:16.832Z,1520675236.832 [NAL9602](INFO): Powering up NAL9602
2018-03-10T09:47:27.636Z,1520675247.636 [NAL9602](INFO): NAL9602 initialized
2018-03-10T09:49:06.113Z,1520675346.113 [BPC1](ERROR): Failed to receive battery data
2018-03-10T09:49:06.113Z,1520675346.113 [BPC1] Communications Fault, FailCount= 1
2018-03-10T09:49:06.113Z,1520675346.113 [BPC1](ERROR): Communications Fault
2018-03-10T09:49:06.152Z,1520675346.152 [CBIT](ERROR): Communications Fault in component: BPC1
2018-03-10T09:49:07.037Z,1520675347.037 [CBIT](INFO): Clearing failed state for component BPC1
2018-03-10T09:49:07.037Z,1520675347.037 [BPC1] No Fault, FailCount= 1
2018-03-10T09:49:37.821Z,1520675377.821 [BPC1](FAULT): Failed to initialize
2018-03-10T09:49:37.821Z,1520675377.821 [BPC1] Communications Fault, FailCount= 2
2018-03-10T09:49:37.821Z,1520675377.821 [BPC1](ERROR): Communications Fault
2018-03-10T09:49:37.877Z,1520675377.877 [CBIT](ERROR): Communications Fault in component: BPC1
2018-03-10T09:49:39.044Z,1520675379.044 [CBIT](INFO): Clearing failed state for component BPC1
2018-03-10T09:49:39.044Z,1520675379.044 [BPC1] No Fault, FailCount= 2
2018-03-10T09:49:56.625Z,1520675396.625 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:49:56.625Z,1520675396.625 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 14
2018-03-10T09:49:56.625Z,1520675396.625 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-10T09:49:56.649Z,1520675396.649 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-10T09:49:57.027Z,1520675397.027 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-10T09:49:57.027Z,1520675397.027 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 14
2018-03-10T09:49:57.418Z,1520675397.418 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-10T09:49:57.418Z,1520675397.418 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-10T09:49:57.418Z,1520675397.418 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-10T09:50:09.593Z,1520675409.593 [BPC1](FAULT): Failed to initialize
2018-03-10T09:50:09.593Z,1520675409.593 [BPC1] Communications Fault, FailCount= 3
2018-03-10T09:50:09.593Z,1520675409.593 [BPC1](ERROR): Communications Fault
2018-03-10T09:50:09.652Z,1520675409.652 [CBIT](ERROR): Communications Fault in component: BPC1
2018-03-10T09:50:10.832Z,1520675410.832 [CBIT](INFO): Clearing failed state for component BPC1
2018-03-10T09:50:10.832Z,1520675410.832 [BPC1] No Fault, FailCount= 3
2018-03-10T09:50:41.592Z,1520675441.592 [BPC1](FAULT): Failed to initialize
2018-03-10T09:50:41.593Z,1520675441.593 [BPC1] Communications Fault, FailCount= 4
2018-03-10T09:50:41.593Z,1520675441.593 [BPC1](ERROR): Communications Fault
2018-03-10T09:50:41.667Z,1520675441.667 [CBIT](ERROR): Communications Fault in component: BPC1
2018-03-10T09:50:42.836Z,1520675442.836 [CBIT](INFO): Clearing failed state for component BPC1
2018-03-10T09:50:42.836Z,1520675442.836 [BPC1] No Fault, FailCount= 4
2018-03-10T09:51:02.820Z,1520675462.820 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-03-10T09:46:02.6Z
2018-03-10T09:51:02.820Z,1520675462.820 [Default:CheckIn:Read_GPS] Stopped
2018-03-10T09:51:02.820Z,1520675462.820 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-03-10T09:51:06.989Z,1520675466.989 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20180310T051512/Courier0108.lzma
2018-03-10T09:51:07.761Z,1520675467.761 [DataOverHttps](INFO): Moved sent file to Logs/20180310T051512/Courier0108.lzma.bak
2018-03-10T09:51:07.761Z,1520675467.761 [DataOverHttps](INFO): SBD MOMSN=8003667
2018-03-10T09:51:17.858Z,1520675477.858 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session.
2018-03-10T09:51:19.381Z,1520675479.381 [DataOverHttps](INFO): Sending 270 bytes from file Logs/20180310T051512/Express0109.lzma
2018-03-10T09:51:20.321Z,1520675480.321 [DataOverHttps](INFO): Moved sent file to Logs/20180310T051512/Express0109.lzma.bak
2018-03-10T09:51:20.321Z,1520675480.321 [DataOverHttps](INFO): SBD MOMSN=8003669
2018-03-10T09:51:21.252Z,1520675481.252 [Default:CheckIn:Read_Iridium] Stopped
2018-03-10T09:51:21.252Z,1520675481.252 [Default:CheckIn:C.Wait] Running Loop=1
2018-03-10T09:51:21.253Z,1520675481.253 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-03-10T09:51:49.481Z,1520675509.481 [NAL9602](INFO): Powering down
2018-03-10T09:52:57.731Z,1520675577.731 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:52:57.732Z,1520675577.732 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 15
2018-03-10T09:52:57.732Z,1520675577.732 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-10T09:52:57.744Z,1520675577.744 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-10T09:52:58.156Z,1520675578.156 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-10T09:52:58.156Z,1520675578.156 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 15
2018-03-10T09:52:58.536Z,1520675578.536 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-10T09:52:58.536Z,1520675578.536 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-10T09:52:58.536Z,1520675578.536 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-10T09:55:14.291Z,1520675714.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 0.361215 seconds old.
2018-03-10T09:55:14.293Z,1520675714.293 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 0.361536 seconds old.
2018-03-10T09:55:14.295Z,1520675714.295 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 0.361957 seconds old.
2018-03-10T09:55:14.689Z,1520675714.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 0.759830 seconds old.
2018-03-10T09:55:14.692Z,1520675714.692 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 0.760227 seconds old.
2018-03-10T09:55:14.694Z,1520675714.694 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 0.760591 seconds old.
2018-03-10T09:55:15.091Z,1520675715.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 1.161304 seconds old.
2018-03-10T09:55:15.093Z,1520675715.093 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 1.161687 seconds old.
2018-03-10T09:55:15.095Z,1520675715.095 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 1.162253 seconds old.
2018-03-10T09:55:15.497Z,1520675715.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 1.567825 seconds old.
2018-03-10T09:55:15.500Z,1520675715.500 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 1.568313 seconds old.
2018-03-10T09:55:15.502Z,1520675715.502 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 1.568688 seconds old.
2018-03-10T09:55:29.669Z,1520675729.669 [CBIT](DEBUG): EFC running - data check-sum false
2018-03-10T09:55:58.860Z,1520675758.860 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:55:58.860Z,1520675758.860 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 16
2018-03-10T09:55:58.860Z,1520675758.860 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-10T09:55:58.912Z,1520675758.912 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-10T09:55:59.254Z,1520675759.254 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-10T09:55:59.254Z,1520675759.254 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 16
2018-03-10T09:55:59.637Z,1520675759.637 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-10T09:55:59.637Z,1520675759.637 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-10T09:55:59.637Z,1520675759.637 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-10T09:56:21.629Z,1520675781.629 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-03-10T09:56:21.630Z,1520675781.630 [Default:CheckIn:C.Wait] Stopped
2018-03-10T09:56:21.630Z,1520675781.630 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-03-10T09:56:21.630Z,1520675781.630 [Default:CheckIn:D] Running Loop=1
2018-03-10T09:56:22.039Z,1520675782.039 [Default:CheckIn:D] Stopped
2018-03-10T09:56:22.039Z,1520675782.039 [Default:CheckIn:E] Running Loop=1
2018-03-10T09:56:22.427Z,1520675782.427 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 277.068652 min 
2018-03-10T09:56:22.427Z,1520675782.427 [Default:CheckIn:E] Stopped
2018-03-10T09:56:22.427Z,1520675782.427 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-03-10T09:56:22.428Z,1520675782.428 [Default:CheckIn] Stopped
2018-03-10T09:56:22.428Z,1520675782.428 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-03-10T09:56:22.428Z,1520675782.428 [Default:CheckIn](INFO): Running loop #28
2018-03-10T09:56:22.428Z,1520675782.428 [Default:CheckIn] Running Loop=28
2018-03-10T09:56:22.428Z,1520675782.428 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-03-10T09:56:22.428Z,1520675782.428 [Default:CheckIn:Read_GPS] Running Loop=1
2018-03-10T09:56:23.184Z,1520675783.184 [NAL9602](INFO): Powering up
2018-03-10T09:56:34.100Z,1520675794.100 [NAL9602](INFO): NAL9602 initialized
2018-03-10T09:56:34.896Z,1520675794.896 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-03-10T09:56:34.896Z,1520675794.896 [NAL9602] Data Fault, FailCount= 5
2018-03-10T09:56:34.896Z,1520675794.896 [NAL9602](ERROR): Data Fault
2018-03-10T09:56:34.980Z,1520675794.980 [CBIT](ERROR): Data Fault in component: NAL9602
2018-03-10T09:56:34.981Z,1520675794.981 [CBIT](CRITICAL): Data Fault in component: NAL9602
2018-03-10T09:56:35.292Z,1520675795.292 [NAL9602](INFO): Powering down
2018-03-10T09:56:35.363Z,1520675795.363 [CBIT](INFO): Critical error at 20180310T095634
2018-03-10T09:58:35.279Z,1520675915.279 [CBIT](INFO): Clearing failed state for component NAL9602
2018-03-10T09:58:35.279Z,1520675915.279 [NAL9602] No Fault, FailCount= 5
2018-03-10T09:58:35.584Z,1520675915.584 [NAL9602](INFO): Powering up NAL9602
2018-03-10T09:58:41.618Z,1520675921.618 [BPC1](ERROR): Failed to receive battery data
2018-03-10T09:58:41.618Z,1520675921.618 [BPC1] Communications Fault, FailCount= 1
2018-03-10T09:58:41.618Z,1520675921.618 [BPC1](ERROR): Communications Fault
2018-03-10T09:58:41.641Z,1520675921.641 [CBIT](ERROR): Communications Fault in component: BPC1
2018-03-10T09:58:42.867Z,1520675922.867 [CBIT](INFO): Clearing failed state for component BPC1
2018-03-10T09:58:42.867Z,1520675922.867 [BPC1] No Fault, FailCount= 1
2018-03-10T09:58:46.389Z,1520675926.389 [NAL9602](INFO): NAL9602 initialized
2018-03-10T09:58:59.642Z,1520675939.642 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T09:58:59.643Z,1520675939.643 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 17
2018-03-10T09:58:59.643Z,1520675939.643 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-10T09:58:59.655Z,1520675939.655 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-10T09:59:00.063Z,1520675940.063 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-10T09:59:00.063Z,1520675940.063 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 17
2018-03-10T09:59:00.432Z,1520675940.432 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-10T09:59:00.432Z,1520675940.432 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-10T09:59:00.433Z,1520675940.433 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-10T09:59:13.620Z,1520675953.620 [BPC1](FAULT): Failed to initialize
2018-03-10T09:59:13.620Z,1520675953.620 [BPC1] Communications Fault, FailCount= 2
2018-03-10T09:59:13.620Z,1520675953.620 [BPC1](ERROR): Communications Fault
2018-03-10T09:59:13.665Z,1520675953.665 [CBIT](ERROR): Communications Fault in component: BPC1
2018-03-10T09:59:14.880Z,1520675954.880 [CBIT](INFO): Clearing failed state for component BPC1
2018-03-10T09:59:14.880Z,1520675954.880 [BPC1] No Fault, FailCount= 2
2018-03-10T09:59:45.292Z,1520675985.292 [BPC1](FAULT): Failed to initialize
2018-03-10T09:59:45.292Z,1520675985.292 [BPC1] Communications Fault, FailCount= 3
2018-03-10T09:59:45.293Z,1520675985.293 [BPC1](ERROR): Communications Fault
2018-03-10T09:59:45.357Z,1520675985.357 [CBIT](ERROR): Communications Fault in component: BPC1
2018-03-10T09:59:46.534Z,1520675986.534 [CBIT](INFO): Clearing failed state for component BPC1
2018-03-10T09:59:46.534Z,1520675986.534 [BPC1] No Fault, FailCount= 3
2018-03-10T10:00:17.298Z,1520676017.298 [BPC1](FAULT): Failed to initialize
2018-03-10T10:00:17.298Z,1520676017.298 [BPC1] Communications Fault, FailCount= 4
2018-03-10T10:00:17.298Z,1520676017.298 [BPC1](ERROR): Communications Fault
2018-03-10T10:00:17.352Z,1520676017.352 [CBIT](ERROR): Communications Fault in component: BPC1
2018-03-10T10:00:18.556Z,1520676018.556 [CBIT](INFO): Clearing failed state for component BPC1
2018-03-10T10:00:18.556Z,1520676018.556 [BPC1] No Fault, FailCount= 4
2018-03-10T10:01:22.698Z,1520676082.698 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-03-10T09:56:22.4Z
2018-03-10T10:01:22.698Z,1520676082.698 [Default:CheckIn:Read_GPS] Stopped
2018-03-10T10:01:22.703Z,1520676082.703 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-03-10T10:01:26.967Z,1520676086.967 [DataOverHttps](INFO): Sending 69 bytes from file Logs/20180310T051512/Courier0112.lzma
2018-03-10T10:01:27.757Z,1520676087.757 [DataOverHttps](INFO): Moved sent file to Logs/20180310T051512/Courier0112.lzma.bak
2018-03-10T10:01:27.757Z,1520676087.757 [DataOverHttps](INFO): SBD MOMSN=8003735
2018-03-10T10:01:38.119Z,1520676098.119 [DataOverHttps](INFO): Sending 245 bytes from file Logs/20180310T051512/Express0113.lzma
2018-03-10T10:01:38.918Z,1520676098.918 [DataOverHttps](INFO): Moved sent file to Logs/20180310T051512/Express0113.lzma.bak
2018-03-10T10:01:38.919Z,1520676098.919 [DataOverHttps](INFO): SBD MOMSN=8003738
2018-03-10T10:01:39.645Z,1520676099.645 [Default:CheckIn:Read_Iridium] Stopped
2018-03-10T10:01:39.645Z,1520676099.645 [Default:CheckIn:C.Wait] Running Loop=1
2018-03-10T10:01:39.645Z,1520676099.645 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-03-10T10:02:00.453Z,1520676120.453 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T10:02:00.453Z,1520676120.453 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 18
2018-03-10T10:02:00.453Z,1520676120.453 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-10T10:02:00.478Z,1520676120.478 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-10T10:02:00.876Z,1520676120.876 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-10T10:02:00.876Z,1520676120.876 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 18
2018-03-10T10:02:01.237Z,1520676121.237 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-10T10:02:01.237Z,1520676121.237 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-10T10:02:01.237Z,1520676121.237 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-10T10:02:23.632Z,1520676143.632 [BPC1](ERROR): Bank B: No match for stick 7 serial number:1717 in the onboard configuration file.
2018-03-10T10:02:23.632Z,1520676143.632 [BPC1](ERROR): Failed to parse Bank B battery data
2018-03-10T10:02:23.632Z,1520676143.632 [BPC1] Data Fault, FailCount= 1
2018-03-10T10:02:23.632Z,1520676143.632 [BPC1](ERROR): Data Fault
2018-03-10T10:02:23.687Z,1520676143.687 [CBIT](ERROR): Data Fault in component: BPC1
2018-03-10T10:02:24.848Z,1520676144.848 [CBIT](INFO): Clearing failed state for component BPC1
2018-03-10T10:02:24.848Z,1520676144.848 [BPC1] No Fault, FailCount= 1
2018-03-10T10:03:49.076Z,1520676229.076 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session.
2018-03-10T10:04:19.864Z,1520676259.864 [NAL9602](INFO): Powering down
2018-03-10T10:05:01.263Z,1520676301.263 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T10:05:01.263Z,1520676301.263 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 19
2018-03-10T10:05:01.263Z,1520676301.263 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-10T10:05:01.276Z,1520676301.276 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-10T10:05:01.673Z,1520676301.673 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-10T10:05:01.673Z,1520676301.673 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 19
2018-03-10T10:05:02.075Z,1520676302.075 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-10T10:05:02.075Z,1520676302.075 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-10T10:05:02.075Z,1520676302.075 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-10T10:05:29.690Z,1520676329.690 [CBIT](DEBUG): EFC running - data check-sum false
2018-03-10T10:06:39.813Z,1520676399.813 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-03-10T10:06:39.813Z,1520676399.813 [Default:CheckIn:C.Wait] Stopped
2018-03-10T10:06:39.813Z,1520676399.813 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-03-10T10:06:39.813Z,1520676399.813 [Default:CheckIn:D] Running Loop=1
2018-03-10T10:06:40.214Z,1520676400.214 [Default:CheckIn:D] Stopped
2018-03-10T10:06:40.214Z,1520676400.214 [Default:CheckIn:E] Running Loop=1
2018-03-10T10:06:40.614Z,1520676400.614 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 287.371549 min 
2018-03-10T10:06:40.615Z,1520676400.615 [Default:CheckIn:E] Stopped
2018-03-10T10:06:40.615Z,1520676400.615 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-03-10T10:06:40.615Z,1520676400.615 [Default:CheckIn] Stopped
2018-03-10T10:06:40.615Z,1520676400.615 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-03-10T10:06:40.615Z,1520676400.615 [Default:CheckIn](INFO): Running loop #29
2018-03-10T10:06:40.615Z,1520676400.615 [Default:CheckIn] Running Loop=29
2018-03-10T10:06:40.616Z,1520676400.616 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-03-10T10:06:40.616Z,1520676400.616 [Default:CheckIn:Read_GPS] Running Loop=1
2018-03-10T10:06:44.112Z,1520676404.112 [NAL9602](INFO): Powering up
2018-03-10T10:06:54.988Z,1520676414.988 [NAL9602](INFO): NAL9602 initialized
2018-03-10T10:07:26.992Z,1520676446.992 [NAL9602](ERROR): Failed to receive proper response when querying signal strength for MT queue check.
2018-03-10T10:07:27.075Z,1520676447.075 [NAL9602](FAULT): received: 
+CSQ:0

OK35, 0, 0, 0, 0

OK
2018-03-10T10:07:27.075Z,1520676447.075 [NAL9602] Data Fault, FailCount= 1
2018-03-10T10:07:27.075Z,1520676447.075 [NAL9602](ERROR): Data Fault
2018-03-10T10:07:27.187Z,1520676447.187 [CBIT](ERROR): Data Fault in component: NAL9602
2018-03-10T10:07:27.388Z,1520676447.388 [NAL9602](INFO): Powering down
2018-03-10T10:07:28.259Z,1520676448.259 [CBIT](INFO): Clearing failed state for component NAL9602
2018-03-10T10:07:28.259Z,1520676448.259 [NAL9602] No Fault, FailCount= 1
2018-03-10T10:07:57.500Z,1520676477.500 [NAL9602](INFO): Powering up NAL9602
2018-03-10T10:08:02.349Z,1520676482.349 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T10:08:02.349Z,1520676482.349 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 20
2018-03-10T10:08:02.349Z,1520676482.349 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-10T10:08:02.374Z,1520676482.374 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-10T10:08:02.775Z,1520676482.775 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-10T10:08:02.775Z,1520676482.775 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 20
2018-03-10T10:08:03.140Z,1520676483.140 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-10T10:08:03.141Z,1520676483.141 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-10T10:08:03.141Z,1520676483.141 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-10T10:08:08.700Z,1520676488.700 [NAL9602](INFO): NAL9602 initialized
2018-03-10T10:08:21.962Z,1520676501.962 [BPC1](ERROR): Failed to receive battery data
2018-03-10T10:08:21.962Z,1520676501.962 [BPC1] Communications Fault, FailCount= 1
2018-03-10T10:08:21.962Z,1520676501.962 [BPC1](ERROR): Communications Fault
2018-03-10T10:08:21.985Z,1520676501.985 [CBIT](ERROR): Communications Fault in component: BPC1
2018-03-10T10:08:23.187Z,1520676503.187 [CBIT](INFO): Clearing failed state for component BPC1
2018-03-10T10:08:23.187Z,1520676503.187 [BPC1] No Fault, FailCount= 1
2018-03-10T10:08:53.657Z,1520676533.657 [BPC1](FAULT): Failed to initialize
2018-03-10T10:08:53.657Z,1520676533.657 [BPC1] Communications Fault, FailCount= 2
2018-03-10T10:08:53.657Z,1520676533.657 [BPC1](ERROR): Communications Fault
2018-03-10T10:08:53.680Z,1520676533.680 [CBIT](ERROR): Communications Fault in component: BPC1
2018-03-10T10:08:54.892Z,1520676534.892 [CBIT](INFO): Clearing failed state for component BPC1
2018-03-10T10:08:54.892Z,1520676534.892 [BPC1] No Fault, FailCount= 2
2018-03-10T10:09:25.664Z,1520676565.664 [BPC1](FAULT): Failed to initialize
2018-03-10T10:09:25.665Z,1520676565.665 [BPC1] Communications Fault, FailCount= 3
2018-03-10T10:09:25.665Z,1520676565.665 [BPC1](ERROR): Communications Fault
2018-03-10T10:09:25.687Z,1520676565.687 [CBIT](ERROR): Communications Fault in component: BPC1
2018-03-10T10:09:26.885Z,1520676566.885 [CBIT](INFO): Clearing failed state for component BPC1
2018-03-10T10:09:26.885Z,1520676566.885 [BPC1] No Fault, FailCount= 3
2018-03-10T10:09:57.658Z,1520676597.658 [BPC1](FAULT): Failed to initialize
2018-03-10T10:09:57.658Z,1520676597.658 [BPC1] Communications Fault, FailCount= 4
2018-03-10T10:09:57.658Z,1520676597.658 [BPC1](ERROR): Communications Fault
2018-03-10T10:09:57.698Z,1520676597.698 [CBIT](ERROR): Communications Fault in component: BPC1
2018-03-10T10:09:58.892Z,1520676598.892 [CBIT](INFO): Clearing failed state for component BPC1
2018-03-10T10:09:58.892Z,1520676598.892 [BPC1] No Fault, FailCount= 4
2018-03-10T10:11:03.502Z,1520676663.502 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T10:11:03.502Z,1520676663.502 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 21
2018-03-10T10:11:03.502Z,1520676663.502 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-10T10:11:03.561Z,1520676663.561 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-10T10:11:03.892Z,1520676663.892 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-10T10:11:03.892Z,1520676663.892 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 21
2018-03-10T10:11:04.262Z,1520676664.262 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-10T10:11:04.263Z,1520676664.263 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-10T10:11:04.263Z,1520676664.263 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-10T10:11:40.668Z,1520676700.668 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-03-10T10:06:40.6Z
2018-03-10T10:11:40.668Z,1520676700.668 [Default:CheckIn:Read_GPS] Stopped
2018-03-10T10:11:40.669Z,1520676700.669 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-03-10T10:11:45.039Z,1520676705.039 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20180310T051512/Courier0116.lzma
2018-03-10T10:11:45.838Z,1520676705.838 [DataOverHttps](INFO): Moved sent file to Logs/20180310T051512/Courier0116.lzma.bak
2018-03-10T10:11:45.838Z,1520676705.838 [DataOverHttps](INFO): SBD MOMSN=8003797
2018-03-10T10:11:57.064Z,1520676717.064 [DataOverHttps](INFO): Sending 264 bytes from file Logs/20180310T051512/Express0117.lzma
2018-03-10T10:11:57.861Z,1520676717.861 [DataOverHttps](INFO): Moved sent file to Logs/20180310T051512/Express0117.lzma.bak
2018-03-10T10:11:57.861Z,1520676717.861 [DataOverHttps](INFO): SBD MOMSN=8003799
2018-03-10T10:11:58.612Z,1520676718.612 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session.
2018-03-10T10:11:58.661Z,1520676718.661 [Default:CheckIn:Read_Iridium] Stopped
2018-03-10T10:11:58.661Z,1520676718.661 [Default:CheckIn:C.Wait] Running Loop=1
2018-03-10T10:11:58.662Z,1520676718.662 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-03-10T10:12:28.864Z,1520676748.864 [NAL9602](INFO): Powering down
2018-03-10T10:14:04.401Z,1520676844.401 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T10:14:04.401Z,1520676844.401 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 22
2018-03-10T10:14:04.401Z,1520676844.401 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-10T10:14:04.430Z,1520676844.430 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-10T10:14:04.811Z,1520676844.811 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-10T10:14:04.811Z,1520676844.811 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 22
2018-03-10T10:14:05.201Z,1520676845.201 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-10T10:14:05.201Z,1520676845.201 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-10T10:14:05.202Z,1520676845.202 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-10T10:15:29.696Z,1520676929.696 [CBIT](DEBUG): EFC running - data check-sum false
2018-03-10T10:16:59.002Z,1520677019.002 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-03-10T10:16:59.002Z,1520677019.002 [Default:CheckIn:C.Wait] Stopped
2018-03-10T10:16:59.002Z,1520677019.002 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-03-10T10:16:59.002Z,1520677019.002 [Default:CheckIn:D] Running Loop=1
2018-03-10T10:16:59.397Z,1520677019.397 [Default:CheckIn:D] Stopped
2018-03-10T10:16:59.397Z,1520677019.397 [Default:CheckIn:E] Running Loop=1
2018-03-10T10:16:59.805Z,1520677019.805 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 297.691276 min 
2018-03-10T10:16:59.806Z,1520677019.806 [Default:CheckIn:E] Stopped
2018-03-10T10:16:59.806Z,1520677019.806 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-03-10T10:16:59.806Z,1520677019.806 [Default:CheckIn] Stopped
2018-03-10T10:16:59.806Z,1520677019.806 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-03-10T10:16:59.806Z,1520677019.806 [Default:CheckIn](INFO): Running loop #30
2018-03-10T10:16:59.806Z,1520677019.806 [Default:CheckIn] Running Loop=30
2018-03-10T10:16:59.806Z,1520677019.806 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-03-10T10:16:59.806Z,1520677019.806 [Default:CheckIn:Read_GPS] Running Loop=1
2018-03-10T10:17:03.203Z,1520677023.203 [NAL9602](INFO): Powering up
2018-03-10T10:17:05.257Z,1520677025.257 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T10:17:05.257Z,1520677025.257 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 23
2018-03-10T10:17:05.257Z,1520677025.257 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-10T10:17:05.269Z,1520677025.269 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-10T10:17:05.676Z,1520677025.676 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-10T10:17:05.676Z,1520677025.676 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 23
2018-03-10T10:17:06.057Z,1520677026.057 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-10T10:17:06.058Z,1520677026.058 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-10T10:17:06.058Z,1520677026.058 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-10T10:17:14.408Z,1520677034.408 [NAL9602](INFO): NAL9602 initialized
2018-03-10T10:17:15.196Z,1520677035.196 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-03-10T10:17:15.196Z,1520677035.196 [NAL9602] Data Fault, FailCount= 2
2018-03-10T10:17:15.196Z,1520677035.196 [NAL9602](ERROR): Data Fault
2018-03-10T10:17:15.291Z,1520677035.291 [CBIT](ERROR): Data Fault in component: NAL9602
2018-03-10T10:17:15.596Z,1520677035.596 [NAL9602](INFO): Powering down
2018-03-10T10:17:16.454Z,1520677036.454 [CBIT](INFO): Clearing failed state for component NAL9602
2018-03-10T10:17:16.454Z,1520677036.454 [NAL9602] No Fault, FailCount= 2
2018-03-10T10:17:45.600Z,1520677065.600 [NAL9602](INFO): Powering up NAL9602
2018-03-10T10:17:56.796Z,1520677076.796 [NAL9602](INFO): NAL9602 initialized
2018-03-10T10:18:03.224Z,1520677083.224 [BPC1](ERROR): Failed to receive battery data
2018-03-10T10:18:03.224Z,1520677083.224 [BPC1] Communications Fault, FailCount= 1
2018-03-10T10:18:03.224Z,1520677083.224 [BPC1](ERROR): Communications Fault
2018-03-10T10:18:03.246Z,1520677083.246 [CBIT](ERROR): Communications Fault in component: BPC1
2018-03-10T10:18:04.146Z,1520677084.146 [CBIT](INFO): Clearing failed state for component BPC1
2018-03-10T10:18:04.146Z,1520677084.146 [BPC1] No Fault, FailCount= 1
2018-03-10T10:18:34.922Z,1520677114.922 [BPC1](FAULT): Failed to initialize
2018-03-10T10:18:34.922Z,1520677114.922 [BPC1] Communications Fault, FailCount= 2
2018-03-10T10:18:34.922Z,1520677114.922 [BPC1](ERROR): Communications Fault
2018-03-10T10:18:34.969Z,1520677114.969 [CBIT](ERROR): Communications Fault in component: BPC1
2018-03-10T10:18:36.168Z,1520677116.168 [CBIT](INFO): Clearing failed state for component BPC1
2018-03-10T10:18:36.169Z,1520677116.169 [BPC1] No Fault, FailCount= 2
2018-03-10T10:19:06.642Z,1520677146.642 [BPC1](FAULT): Failed to initialize
2018-03-10T10:19:06.643Z,1520677146.643 [BPC1] Communications Fault, FailCount= 3
2018-03-10T10:19:06.643Z,1520677146.643 [BPC1](ERROR): Communications Fault
2018-03-10T10:19:06.664Z,1520677146.664 [CBIT](ERROR): Communications Fault in component: BPC1
2018-03-10T10:19:07.875Z,1520677147.875 [CBIT](INFO): Clearing failed state for component BPC1
2018-03-10T10:19:07.875Z,1520677147.875 [BPC1] No Fault, FailCount= 3
2018-03-10T10:19:38.653Z,1520677178.653 [BPC1](FAULT): Failed to initialize
2018-03-10T10:19:38.653Z,1520677178.653 [BPC1] Communications Fault, FailCount= 4
2018-03-10T10:19:38.653Z,1520677178.653 [BPC1](ERROR): Communications Fault
2018-03-10T10:19:38.723Z,1520677178.723 [CBIT](ERROR): Communications Fault in component: BPC1
2018-03-10T10:19:39.884Z,1520677179.884 [CBIT](INFO): Clearing failed state for component BPC1
2018-03-10T10:19:39.885Z,1520677179.885 [BPC1] No Fault, FailCount= 4
2018-03-10T10:20:06.366Z,1520677206.366 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T10:20:06.366Z,1520677206.366 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 24
2018-03-10T10:20:06.366Z,1520677206.366 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-10T10:20:06.399Z,1520677206.399 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-10T10:20:06.772Z,1520677206.772 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-10T10:20:06.772Z,1520677206.772 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 24
2018-03-10T10:20:07.158Z,1520677207.158 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-10T10:20:07.158Z,1520677207.158 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-10T10:20:07.158Z,1520677207.158 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-10T10:22:00.086Z,1520677320.086 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-03-10T10:16:59.8Z
2018-03-10T10:22:00.086Z,1520677320.086 [Default:CheckIn:Read_GPS] Stopped
2018-03-10T10:22:00.086Z,1520677320.086 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-03-10T10:22:05.332Z,1520677325.332 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20180310T051512/Courier0120.lzma
2018-03-10T10:22:06.117Z,1520677326.117 [DataOverHttps](INFO): Moved sent file to Logs/20180310T051512/Courier0120.lzma.bak
2018-03-10T10:22:06.117Z,1520677326.117 [DataOverHttps](INFO): SBD MOMSN=8003851
2018-03-10T10:22:17.927Z,1520677337.927 [DataOverHttps](INFO): Sending 246 bytes from file Logs/20180310T051512/Express0121.lzma
2018-03-10T10:22:18.705Z,1520677338.705 [DataOverHttps](INFO): Moved sent file to Logs/20180310T051512/Express0121.lzma.bak
2018-03-10T10:22:18.705Z,1520677338.705 [DataOverHttps](INFO): SBD MOMSN=8003853
2018-03-10T10:22:19.446Z,1520677339.446 [Default:CheckIn:Read_Iridium] Stopped
2018-03-10T10:22:19.446Z,1520677339.446 [Default:CheckIn:C.Wait] Running Loop=1
2018-03-10T10:22:19.446Z,1520677339.446 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-03-10T10:23:00.036Z,1520677380.036 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session.
2018-03-10T10:23:07.279Z,1520677387.279 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T10:23:07.279Z,1520677387.279 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 25
2018-03-10T10:23:07.279Z,1520677387.279 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-10T10:23:07.323Z,1520677387.323 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-10T10:23:07.702Z,1520677387.702 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-10T10:23:07.702Z,1520677387.702 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 25
2018-03-10T10:23:08.089Z,1520677388.089 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-10T10:23:08.090Z,1520677388.090 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-10T10:23:08.090Z,1520677388.090 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-10T10:23:30.520Z,1520677410.520 [NAL9602](INFO): Powering down
2018-03-10T10:25:29.819Z,1520677529.819 [CBIT](DEBUG): EFC running - data check-sum false
2018-03-10T10:26:08.203Z,1520677568.203 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T10:26:08.203Z,1520677568.203 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 26
2018-03-10T10:26:08.203Z,1520677568.203 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-10T10:26:08.216Z,1520677568.216 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-10T10:26:08.641Z,1520677568.641 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-10T10:26:08.641Z,1520677568.641 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 26
2018-03-10T10:26:09.011Z,1520677569.011 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-10T10:26:09.011Z,1520677569.011 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-10T10:26:09.012Z,1520677569.012 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-10T10:27:19.846Z,1520677639.846 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-03-10T10:27:19.846Z,1520677639.846 [Default:CheckIn:C.Wait] Stopped
2018-03-10T10:27:19.847Z,1520677639.847 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-03-10T10:27:19.847Z,1520677639.847 [Default:CheckIn:D] Running Loop=1
2018-03-10T10:27:20.254Z,1520677640.254 [Default:CheckIn:D] Stopped
2018-03-10T10:27:20.254Z,1520677640.254 [Default:CheckIn:E] Running Loop=1
2018-03-10T10:27:20.664Z,1520677640.664 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 308.038900 min 
2018-03-10T10:27:20.664Z,1520677640.664 [Default:CheckIn:E] Stopped
2018-03-10T10:27:20.664Z,1520677640.664 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-03-10T10:27:20.664Z,1520677640.664 [Default:CheckIn] Stopped
2018-03-10T10:27:20.665Z,1520677640.665 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-03-10T10:27:20.665Z,1520677640.665 [Default:CheckIn](INFO): Running loop #31
2018-03-10T10:27:20.665Z,1520677640.665 [Default:CheckIn] Running Loop=31
2018-03-10T10:27:20.665Z,1520677640.665 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-03-10T10:27:20.665Z,1520677640.665 [Default:CheckIn:Read_GPS] Running Loop=1
2018-03-10T10:27:23.966Z,1520677643.966 [NAL9602](INFO): Powering up
2018-03-10T10:27:35.093Z,1520677655.093 [NAL9602](INFO): NAL9602 initialized
2018-03-10T10:27:43.133Z,1520677663.133 [BPC1](ERROR): Failed to receive battery data
2018-03-10T10:27:43.133Z,1520677663.133 [BPC1] Communications Fault, FailCount= 1
2018-03-10T10:27:43.133Z,1520677663.133 [BPC1](ERROR): Communications Fault
2018-03-10T10:27:43.168Z,1520677663.168 [CBIT](ERROR): Communications Fault in component: BPC1
2018-03-10T10:27:44.402Z,1520677664.402 [CBIT](INFO): Clearing failed state for component BPC1
2018-03-10T10:27:44.402Z,1520677664.402 [BPC1] No Fault, FailCount= 1
2018-03-10T10:28:07.099Z,1520677687.099 [NAL9602](ERROR): Failed to receive proper response when querying signal strength for MT queue check.
2018-03-10T10:28:07.183Z,1520677687.183 [NAL9602](FAULT): received: 
+CSQ:0

OK35, 0, 0, 0, 0

OK
2018-03-10T10:28:07.183Z,1520677687.183 [NAL9602] Data Fault, FailCount= 3
2018-03-10T10:28:07.183Z,1520677687.183 [NAL9602](ERROR): Data Fault
2018-03-10T10:28:07.230Z,1520677687.230 [CBIT](ERROR): Data Fault in component: NAL9602
2018-03-10T10:28:07.504Z,1520677687.504 [NAL9602](INFO): Powering down
2018-03-10T10:28:08.374Z,1520677688.374 [CBIT](INFO): Clearing failed state for component NAL9602
2018-03-10T10:28:08.374Z,1520677688.374 [NAL9602] No Fault, FailCount= 3
2018-03-10T10:28:15.121Z,1520677695.121 [BPC1](FAULT): Failed to initialize
2018-03-10T10:28:15.121Z,1520677695.121 [BPC1] Communications Fault, FailCount= 2
2018-03-10T10:28:15.121Z,1520677695.121 [BPC1](ERROR): Communications Fault
2018-03-10T10:28:15.171Z,1520677695.171 [CBIT](ERROR): Communications Fault in component: BPC1
2018-03-10T10:28:16.360Z,1520677696.360 [CBIT](INFO): Clearing failed state for component BPC1
2018-03-10T10:28:16.360Z,1520677696.360 [BPC1] No Fault, FailCount= 2
2018-03-10T10:28:37.588Z,1520677717.588 [NAL9602](INFO): Powering up NAL9602
2018-03-10T10:28:46.817Z,1520677726.817 [BPC1](FAULT): Failed to initialize
2018-03-10T10:28:46.817Z,1520677726.817 [BPC1] Communications Fault, FailCount= 3
2018-03-10T10:28:46.817Z,1520677726.817 [BPC1](ERROR): Communications Fault
2018-03-10T10:28:46.840Z,1520677726.840 [CBIT](ERROR): Communications Fault in component: BPC1
2018-03-10T10:28:48.048Z,1520677728.048 [CBIT](INFO): Clearing failed state for component BPC1
2018-03-10T10:28:48.048Z,1520677728.048 [BPC1] No Fault, FailCount= 3
2018-03-10T10:28:48.792Z,1520677728.792 [NAL9602](INFO): NAL9602 initialized
2018-03-10T10:28:49.589Z,1520677729.589 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-03-10T10:28:49.589Z,1520677729.589 [NAL9602] Data Fault, FailCount= 4
2018-03-10T10:28:49.589Z,1520677729.589 [NAL9602](ERROR): Data Fault
2018-03-10T10:28:49.680Z,1520677729.680 [CBIT](ERROR): Data Fault in component: NAL9602
2018-03-10T10:28:49.989Z,1520677729.989 [NAL9602](INFO): Powering down
2018-03-10T10:28:50.846Z,1520677730.846 [CBIT](INFO): Clearing failed state for component NAL9602
2018-03-10T10:28:50.847Z,1520677730.847 [NAL9602] No Fault, FailCount= 4
2018-03-10T10:29:09.235Z,1520677749.235 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T10:29:09.235Z,1520677749.235 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 27
2018-03-10T10:29:09.235Z,1520677749.235 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-10T10:29:09.248Z,1520677749.248 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-10T10:29:09.663Z,1520677749.663 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-10T10:29:09.663Z,1520677749.663 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 27
2018-03-10T10:29:10.057Z,1520677750.057 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-10T10:29:10.057Z,1520677750.057 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-10T10:29:10.057Z,1520677750.057 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-10T10:29:18.820Z,1520677758.820 [BPC1](FAULT): Failed to initialize
2018-03-10T10:29:18.820Z,1520677758.820 [BPC1] Communications Fault, FailCount= 4
2018-03-10T10:29:18.821Z,1520677758.821 [BPC1](ERROR): Communications Fault
2018-03-10T10:29:18.843Z,1520677758.843 [CBIT](ERROR): Communications Fault in component: BPC1
2018-03-10T10:29:19.992Z,1520677759.992 [NAL9602](INFO): Powering up NAL9602
2018-03-10T10:29:20.054Z,1520677760.054 [CBIT](INFO): Clearing failed state for component BPC1
2018-03-10T10:29:20.054Z,1520677760.054 [BPC1] No Fault, FailCount= 4
2018-03-10T10:29:30.876Z,1520677770.876 [NAL9602](INFO): NAL9602 initialized
2018-03-10T10:32:10.159Z,1520677930.159 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T10:32:10.159Z,1520677930.159 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 28
2018-03-10T10:32:10.160Z,1520677930.160 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-10T10:32:10.172Z,1520677930.172 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-10T10:32:10.585Z,1520677930.585 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-10T10:32:10.585Z,1520677930.585 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 28
2018-03-10T10:32:10.970Z,1520677930.970 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-10T10:32:10.975Z,1520677930.975 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-10T10:32:10.975Z,1520677930.975 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-10T10:32:20.958Z,1520677940.958 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-03-10T10:27:20.7Z
2018-03-10T10:32:20.958Z,1520677940.958 [Default:CheckIn:Read_GPS] Stopped
2018-03-10T10:32:20.958Z,1520677940.958 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-03-10T10:32:25.275Z,1520677945.275 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20180310T051512/Courier0124.lzma
2018-03-10T10:32:26.073Z,1520677946.073 [DataOverHttps](INFO): Moved sent file to Logs/20180310T051512/Courier0124.lzma.bak
2018-03-10T10:32:26.073Z,1520677946.073 [DataOverHttps](INFO): SBD MOMSN=8003915
2018-03-10T10:32:36.244Z,1520677956.244 [DataOverHttps](INFO): Sending 283 bytes from file Logs/20180310T051512/Express0125.lzma
2018-03-10T10:32:37.041Z,1520677957.041 [DataOverHttps](INFO): Moved sent file to Logs/20180310T051512/Express0125.lzma.bak
2018-03-10T10:32:37.041Z,1520677957.041 [DataOverHttps](INFO): SBD MOMSN=8003917
2018-03-10T10:32:37.804Z,1520677957.804 [Default:CheckIn:Read_Iridium] Stopped
2018-03-10T10:32:37.804Z,1520677957.804 [Default:CheckIn:C.Wait] Running Loop=1
2018-03-10T10:32:37.804Z,1520677957.804 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-03-10T10:32:41.475Z,1520677961.475 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session.
2018-03-10T10:33:11.980Z,1520677991.980 [NAL9602](INFO): Powering down
2018-03-10T10:35:11.102Z,1520678111.102 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T10:35:11.102Z,1520678111.102 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 29
2018-03-10T10:35:11.102Z,1520678111.102 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-10T10:35:11.118Z,1520678111.118 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-10T10:35:11.519Z,1520678111.519 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-10T10:35:11.520Z,1520678111.520 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 29
2018-03-10T10:35:11.903Z,1520678111.903 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-10T10:35:11.904Z,1520678111.904 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-10T10:35:11.904Z,1520678111.904 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-10T10:35:29.910Z,1520678129.910 [CBIT](DEBUG): EFC running - data check-sum false
2018-03-10T10:37:24.479Z,1520678244.479 [BPC1](ERROR): Failed to receive battery data
2018-03-10T10:37:24.479Z,1520678244.479 [BPC1] Communications Fault, FailCount= 1
2018-03-10T10:37:24.479Z,1520678244.479 [BPC1](ERROR): Communications Fault
2018-03-10T10:37:24.501Z,1520678244.501 [CBIT](ERROR): Communications Fault in component: BPC1
2018-03-10T10:37:25.707Z,1520678245.707 [CBIT](INFO): Clearing failed state for component BPC1
2018-03-10T10:37:25.707Z,1520678245.707 [BPC1] No Fault, FailCount= 1
2018-03-10T10:37:38.095Z,1520678258.095 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-03-10T10:37:38.096Z,1520678258.096 [Default:CheckIn:C.Wait] Stopped
2018-03-10T10:37:38.096Z,1520678258.096 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-03-10T10:37:38.096Z,1520678258.096 [Default:CheckIn:D] Running Loop=1
2018-03-10T10:37:38.506Z,1520678258.506 [Default:CheckIn:D] Stopped
2018-03-10T10:37:38.506Z,1520678258.506 [Default:CheckIn:E] Running Loop=1
2018-03-10T10:37:38.895Z,1520678258.895 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 318.343099 min 
2018-03-10T10:37:38.895Z,1520678258.895 [Default:CheckIn:E] Stopped
2018-03-10T10:37:38.895Z,1520678258.895 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-03-10T10:37:38.896Z,1520678258.896 [Default:CheckIn] Stopped
2018-03-10T10:37:38.896Z,1520678258.896 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-03-10T10:37:38.896Z,1520678258.896 [Default:CheckIn](INFO): Running loop #32
2018-03-10T10:37:38.896Z,1520678258.896 [Default:CheckIn] Running Loop=32
2018-03-10T10:37:38.896Z,1520678258.896 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-03-10T10:37:38.896Z,1520678258.896 [Default:CheckIn:Read_GPS] Running Loop=1
2018-03-10T10:37:42.210Z,1520678262.210 [NAL9602](INFO): Powering up
2018-03-10T10:37:53.380Z,1520678273.380 [NAL9602](INFO): NAL9602 initialized
2018-03-10T10:37:56.217Z,1520678276.217 [BPC1](FAULT): Failed to initialize
2018-03-10T10:37:56.217Z,1520678276.217 [BPC1] Communications Fault, FailCount= 2
2018-03-10T10:37:56.217Z,1520678276.217 [BPC1](ERROR): Communications Fault
2018-03-10T10:37:56.238Z,1520678276.238 [CBIT](ERROR): Communications Fault in component: BPC1
2018-03-10T10:37:57.439Z,1520678277.439 [CBIT](INFO): Clearing failed state for component BPC1
2018-03-10T10:37:57.439Z,1520678277.439 [BPC1] No Fault, FailCount= 2
2018-03-10T10:38:12.232Z,1520678292.232 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T10:38:12.233Z,1520678292.233 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 30
2018-03-10T10:38:12.233Z,1520678292.233 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-10T10:38:12.249Z,1520678292.249 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-10T10:38:12.645Z,1520678292.645 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-10T10:38:12.645Z,1520678292.645 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 30
2018-03-10T10:38:13.038Z,1520678293.038 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-10T10:38:13.038Z,1520678293.038 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-10T10:38:13.039Z,1520678293.039 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-10T10:38:25.378Z,1520678305.378 [NAL9602](ERROR): Failed to receive proper response when querying signal strength for MT queue check.
2018-03-10T10:38:25.455Z,1520678305.455 [NAL9602](FAULT): received: 
+CSQ:0

OK35, 0, 0, 0, 0

OK
2018-03-10T10:38:25.455Z,1520678305.455 [NAL9602] Data Fault, FailCount= 5
2018-03-10T10:38:25.455Z,1520678305.455 [NAL9602](ERROR): Data Fault
2018-03-10T10:38:25.540Z,1520678305.540 [CBIT](ERROR): Data Fault in component: NAL9602
2018-03-10T10:38:25.540Z,1520678305.540 [CBIT](CRITICAL): Data Fault in component: NAL9602
2018-03-10T10:38:25.792Z,1520678305.792 [NAL9602](INFO): Powering down
2018-03-10T10:38:25.873Z,1520678305.873 [CBIT](INFO): Critical error at 20180310T103825
2018-03-10T10:38:28.212Z,1520678308.212 [BPC1](FAULT): Failed to initialize
2018-03-10T10:38:28.212Z,1520678308.212 [BPC1] Communications Fault, FailCount= 3
2018-03-10T10:38:28.212Z,1520678308.212 [BPC1](ERROR): Communications Fault
2018-03-10T10:38:28.267Z,1520678308.267 [CBIT](ERROR): Communications Fault in component: BPC1
2018-03-10T10:38:29.453Z,1520678309.453 [CBIT](INFO): Clearing failed state for component BPC1
2018-03-10T10:38:29.453Z,1520678309.453 [BPC1] No Fault, FailCount= 3
2018-03-10T10:39:00.198Z,1520678340.198 [BPC1](FAULT): Failed to initialize
2018-03-10T10:39:00.198Z,1520678340.198 [BPC1] Communications Fault, FailCount= 4
2018-03-10T10:39:00.198Z,1520678340.198 [BPC1](ERROR): Communications Fault
2018-03-10T10:39:00.220Z,1520678340.220 [CBIT](ERROR): Communications Fault in component: BPC1
2018-03-10T10:39:01.425Z,1520678341.425 [CBIT](INFO): Clearing failed state for component BPC1
2018-03-10T10:39:01.425Z,1520678341.425 [BPC1] No Fault, FailCount= 4
2018-03-10T10:39:32.196Z,1520678372.196 [BPC1](FAULT): Failed to initialize
2018-03-10T10:39:32.196Z,1520678372.196 [BPC1] Communications Fault, FailCount= 5
2018-03-10T10:39:32.196Z,1520678372.196 [BPC1](ERROR): Communications Fault
2018-03-10T10:39:32.245Z,1520678372.245 [CBIT](ERROR): Communications Fault in component: BPC1
2018-03-10T10:39:33.444Z,1520678373.444 [CBIT](INFO): Clearing failed state for component BPC1
2018-03-10T10:39:33.444Z,1520678373.444 [BPC1] No Fault, FailCount= 5
2018-03-10T10:40:25.645Z,1520678425.645 [CBIT](INFO): Clearing failed state for component NAL9602
2018-03-10T10:40:25.646Z,1520678425.646 [NAL9602] No Fault, FailCount= 5
2018-03-10T10:40:25.992Z,1520678425.992 [NAL9602](INFO): Powering up NAL9602
2018-03-10T10:40:36.792Z,1520678436.792 [NAL9602](INFO): NAL9602 initialized
2018-03-10T10:40:37.596Z,1520678437.596 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-03-10T10:40:37.596Z,1520678437.596 [NAL9602] Data Fault, FailCount= 1
2018-03-10T10:40:37.596Z,1520678437.596 [NAL9602](ERROR): Data Fault
2018-03-10T10:40:37.675Z,1520678437.675 [CBIT](ERROR): Data Fault in component: NAL9602
2018-03-10T10:40:37.992Z,1520678437.992 [NAL9602](INFO): Powering down
2018-03-10T10:40:38.866Z,1520678438.866 [CBIT](INFO): Clearing failed state for component NAL9602
2018-03-10T10:40:38.866Z,1520678438.866 [NAL9602] No Fault, FailCount= 1
2018-03-10T10:41:08.064Z,1520678468.064 [NAL9602](INFO): Powering up NAL9602
2018-03-10T10:41:13.310Z,1520678473.310 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T10:41:13.310Z,1520678473.310 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 31
2018-03-10T10:41:13.310Z,1520678473.310 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-10T10:41:13.322Z,1520678473.322 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-10T10:41:13.733Z,1520678473.733 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-10T10:41:13.734Z,1520678473.734 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 31
2018-03-10T10:41:14.113Z,1520678474.113 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-10T10:41:14.113Z,1520678474.113 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-10T10:41:14.114Z,1520678474.114 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-10T10:41:18.864Z,1520678478.864 [NAL9602](INFO): NAL9602 initialized
2018-03-10T10:42:39.046Z,1520678559.046 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-03-10T10:37:38.9Z
2018-03-10T10:42:39.046Z,1520678559.046 [Default:CheckIn:Read_GPS] Stopped
2018-03-10T10:42:39.046Z,1520678559.046 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-03-10T10:42:43.622Z,1520678563.622 [DataOverHttps](INFO): Sending 69 bytes from file Logs/20180310T051512/Courier0128.lzma
2018-03-10T10:42:44.417Z,1520678564.417 [DataOverHttps](INFO): Moved sent file to Logs/20180310T051512/Courier0128.lzma.bak
2018-03-10T10:42:44.418Z,1520678564.418 [DataOverHttps](INFO): SBD MOMSN=8003984
2018-03-10T10:42:54.831Z,1520678574.831 [DataOverHttps](INFO): Sending 290 bytes from file Logs/20180310T051512/Express0129.lzma
2018-03-10T10:42:55.581Z,1520678575.581 [DataOverHttps](INFO): Moved sent file to Logs/20180310T051512/Express0129.lzma.bak
2018-03-10T10:42:55.582Z,1520678575.582 [DataOverHttps](INFO): SBD MOMSN=8003987
2018-03-10T10:42:56.453Z,1520678576.453 [Default:CheckIn:Read_Iridium] Stopped
2018-03-10T10:42:56.453Z,1520678576.453 [Default:CheckIn:C.Wait] Running Loop=1
2018-03-10T10:42:56.454Z,1520678576.454 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-03-10T10:42:56.884Z,1520678576.884 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session.
2018-03-10T10:43:30.132Z,1520678610.132 [NAL9602](INFO): Powering down
2018-03-10T10:44:14.381Z,1520678654.381 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T10:44:14.382Z,1520678654.382 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 32
2018-03-10T10:44:14.382Z,1520678654.382 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-10T10:44:14.407Z,1520678654.407 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-10T10:44:14.771Z,1520678654.771 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-10T10:44:14.771Z,1520678654.771 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 32
2018-03-10T10:44:15.141Z,1520678655.141 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-10T10:44:15.141Z,1520678655.141 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-10T10:44:15.141Z,1520678655.141 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-10T10:45:30.040Z,1520678730.040 [CBIT](DEBUG): EFC running - data check-sum false
2018-03-10T10:47:01.169Z,1520678821.169 [BPC1](ERROR): Failed to receive battery data
2018-03-10T10:47:01.169Z,1520678821.169 [BPC1] Communications Fault, FailCount= 1
2018-03-10T10:47:01.169Z,1520678821.169 [BPC1](ERROR): Communications Fault
2018-03-10T10:47:01.193Z,1520678821.193 [CBIT](ERROR): Communications Fault in component: BPC1
2018-03-10T10:47:02.412Z,1520678822.412 [CBIT](INFO): Clearing failed state for component BPC1
2018-03-10T10:47:02.412Z,1520678822.412 [BPC1] No Fault, FailCount= 1
2018-03-10T10:47:15.168Z,1520678835.168 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T10:47:15.168Z,1520678835.168 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 33
2018-03-10T10:47:15.168Z,1520678835.168 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-10T10:47:15.181Z,1520678835.181 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-10T10:47:15.625Z,1520678835.625 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-10T10:47:15.625Z,1520678835.625 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 33
2018-03-10T10:47:15.984Z,1520678835.984 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-10T10:47:15.985Z,1520678835.985 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-10T10:47:15.985Z,1520678835.985 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-10T10:47:33.153Z,1520678853.153 [BPC1](FAULT): Failed to initialize
2018-03-10T10:47:33.153Z,1520678853.153 [BPC1] Communications Fault, FailCount= 2
2018-03-10T10:47:33.153Z,1520678853.153 [BPC1](ERROR): Communications Fault
2018-03-10T10:47:33.205Z,1520678853.205 [CBIT](ERROR): Communications Fault in component: BPC1
2018-03-10T10:47:34.383Z,1520678854.383 [CBIT](INFO): Clearing failed state for component BPC1
2018-03-10T10:47:34.383Z,1520678854.383 [BPC1] No Fault, FailCount= 2
2018-03-10T10:47:56.775Z,1520678876.775 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-03-10T10:47:56.775Z,1520678876.775 [Default:CheckIn:C.Wait] Stopped
2018-03-10T10:47:56.775Z,1520678876.775 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-03-10T10:47:56.775Z,1520678876.775 [Default:CheckIn:D] Running Loop=1
2018-03-10T10:47:57.237Z,1520678877.237 [Default:CheckIn:D] Stopped
2018-03-10T10:47:57.237Z,1520678877.237 [Default:CheckIn:E] Running Loop=1
2018-03-10T10:47:57.581Z,1520678877.581 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 328.655273 min 
2018-03-10T10:47:57.581Z,1520678877.581 [Default:CheckIn:E] Stopped
2018-03-10T10:47:57.581Z,1520678877.581 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-03-10T10:47:57.581Z,1520678877.581 [Default:CheckIn] Stopped
2018-03-10T10:47:57.581Z,1520678877.581 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-03-10T10:47:57.582Z,1520678877.582 [Default:CheckIn](INFO): Running loop #33
2018-03-10T10:47:57.582Z,1520678877.582 [Default:CheckIn] Running Loop=33
2018-03-10T10:47:57.582Z,1520678877.582 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-03-10T10:47:57.582Z,1520678877.582 [Default:CheckIn:Read_GPS] Running Loop=1
2018-03-10T10:48:00.876Z,1520678880.876 [NAL9602](INFO): Powering up
2018-03-10T10:48:04.893Z,1520678884.893 [BPC1](FAULT): Failed to initialize
2018-03-10T10:48:04.893Z,1520678884.893 [BPC1] Communications Fault, FailCount= 3
2018-03-10T10:48:04.893Z,1520678884.893 [BPC1](ERROR): Communications Fault
2018-03-10T10:48:04.956Z,1520678884.956 [CBIT](ERROR): Communications Fault in component: BPC1
2018-03-10T10:48:06.107Z,1520678886.107 [CBIT](INFO): Clearing failed state for component BPC1
2018-03-10T10:48:06.107Z,1520678886.107 [BPC1] No Fault, FailCount= 3
2018-03-10T10:48:12.069Z,1520678892.069 [NAL9602](INFO): NAL9602 initialized
2018-03-10T10:48:36.882Z,1520678916.882 [BPC1](FAULT): Failed to initialize
2018-03-10T10:48:36.882Z,1520678916.882 [BPC1] Communications Fault, FailCount= 4
2018-03-10T10:48:36.882Z,1520678916.882 [BPC1](ERROR): Communications Fault
2018-03-10T10:48:36.932Z,1520678916.932 [CBIT](ERROR): Communications Fault in component: BPC1
2018-03-10T10:48:38.123Z,1520678918.123 [CBIT](INFO): Clearing failed state for component BPC1
2018-03-10T10:48:38.123Z,1520678918.123 [BPC1] No Fault, FailCount= 4
2018-03-10T10:48:44.056Z,1520678924.056 [NAL9602](ERROR): Failed to receive proper response when querying signal strength for MT queue check.
2018-03-10T10:48:44.131Z,1520678924.131 [NAL9602](FAULT): received: 
+CSQ:0

OK35, 0, 0, 0, 0

OK
2018-03-10T10:48:44.131Z,1520678924.131 [NAL9602] Data Fault, FailCount= 2
2018-03-10T10:48:44.131Z,1520678924.131 [NAL9602](ERROR): Data Fault
2018-03-10T10:48:44.216Z,1520678924.216 [CBIT](ERROR): Data Fault in component: NAL9602
2018-03-10T10:48:44.452Z,1520678924.452 [NAL9602](INFO): Powering down
2018-03-10T10:48:45.304Z,1520678925.304 [CBIT](INFO): Clearing failed state for component NAL9602
2018-03-10T10:48:45.304Z,1520678925.304 [NAL9602] No Fault, FailCount= 2
2018-03-10T10:49:14.472Z,1520678954.472 [NAL9602](INFO): Powering up NAL9602
2018-03-10T10:49:25.656Z,1520678965.656 [NAL9602](INFO): NAL9602 initialized
2018-03-10T10:50:16.345Z,1520679016.345 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T10:50:16.345Z,1520679016.345 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 34
2018-03-10T10:50:16.346Z,1520679016.346 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-10T10:50:16.358Z,1520679016.358 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-10T10:50:16.760Z,1520679016.760 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-10T10:50:16.760Z,1520679016.760 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 34
2018-03-10T10:50:17.140Z,1520679017.140 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-10T10:50:17.140Z,1520679017.140 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-10T10:50:17.140Z,1520679017.140 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-10T10:52:57.687Z,1520679177.687 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-03-10T10:47:57.6Z
2018-03-10T10:52:57.687Z,1520679177.687 [Default:CheckIn:Read_GPS] Stopped
2018-03-10T10:52:57.687Z,1520679177.687 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-03-10T10:53:01.967Z,1520679181.967 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20180310T051512/Courier0132.lzma
2018-03-10T10:53:02.761Z,1520679182.761 [DataOverHttps](INFO): Moved sent file to Logs/20180310T051512/Courier0132.lzma.bak
2018-03-10T10:53:02.761Z,1520679182.761 [DataOverHttps](INFO): SBD MOMSN=8004049
2018-03-10T10:53:13.094Z,1520679193.094 [DataOverHttps](INFO): Sending 265 bytes from file Logs/20180310T051512/Express0133.lzma
2018-03-10T10:53:13.877Z,1520679193.877 [DataOverHttps](INFO): Moved sent file to Logs/20180310T051512/Express0133.lzma.bak
2018-03-10T10:53:13.877Z,1520679193.877 [DataOverHttps](INFO): SBD MOMSN=8004051
2018-03-10T10:53:14.584Z,1520679194.584 [Default:CheckIn:Read_Iridium] Stopped
2018-03-10T10:53:14.584Z,1520679194.584 [Default:CheckIn:C.Wait] Running Loop=1
2018-03-10T10:53:14.584Z,1520679194.584 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-03-10T10:53:18.253Z,1520679198.253 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session.
2018-03-10T10:53:18.301Z,1520679198.301 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T10:53:18.301Z,1520679198.301 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 35
2018-03-10T10:53:18.301Z,1520679198.301 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-10T10:53:18.334Z,1520679198.334 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-10T10:53:18.491Z,1520679198.491 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-10T10:53:18.491Z,1520679198.491 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 35
2018-03-10T10:53:18.802Z,1520679198.802 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-10T10:53:18.803Z,1520679198.803 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-10T10:53:18.803Z,1520679198.803 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-10T10:53:48.756Z,1520679228.756 [NAL9602](INFO): Powering down
2018-03-10T10:55:30.085Z,1520679330.085 [CBIT](DEBUG): EFC running - data check-sum false
2018-03-10T10:56:18.877Z,1520679378.877 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T10:56:18.877Z,1520679378.877 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 36
2018-03-10T10:56:18.877Z,1520679378.877 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-10T10:56:18.890Z,1520679378.890 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-10T10:56:19.295Z,1520679379.295 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-10T10:56:19.295Z,1520679379.295 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 36
2018-03-10T10:56:19.663Z,1520679379.663 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-10T10:56:19.664Z,1520679379.664 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-10T10:56:19.664Z,1520679379.664 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-10T10:56:39.640Z,1520679399.640 [BPC1](ERROR): Failed to receive battery data
2018-03-10T10:56:39.640Z,1520679399.640 [BPC1] Communications Fault, FailCount= 1
2018-03-10T10:56:39.640Z,1520679399.640 [BPC1](ERROR): Communications Fault
2018-03-10T10:56:39.709Z,1520679399.709 [CBIT](ERROR): Communications Fault in component: BPC1
2018-03-10T10:56:40.890Z,1520679400.890 [CBIT](INFO): Clearing failed state for component BPC1
2018-03-10T10:56:40.890Z,1520679400.890 [BPC1] No Fault, FailCount= 1
2018-03-10T10:57:11.648Z,1520679431.648 [BPC1](FAULT): Failed to initialize
2018-03-10T10:57:11.648Z,1520679431.648 [BPC1] Communications Fault, FailCount= 2
2018-03-10T10:57:11.648Z,1520679431.648 [BPC1](ERROR): Communications Fault
2018-03-10T10:57:11.697Z,1520679431.697 [CBIT](ERROR): Communications Fault in component: BPC1
2018-03-10T10:57:12.898Z,1520679432.898 [CBIT](INFO): Clearing failed state for component BPC1
2018-03-10T10:57:12.898Z,1520679432.898 [BPC1] No Fault, FailCount= 2
2018-03-10T10:57:43.408Z,1520679463.408 [BPC1](FAULT): Failed to initialize
2018-03-10T10:57:43.408Z,1520679463.408 [BPC1] Communications Fault, FailCount= 3
2018-03-10T10:57:43.408Z,1520679463.408 [BPC1](ERROR): Communications Fault
2018-03-10T10:57:43.435Z,1520679463.435 [CBIT](ERROR): Communications Fault in component: BPC1
2018-03-10T10:57:44.635Z,1520679464.635 [CBIT](INFO): Clearing failed state for component BPC1
2018-03-10T10:57:44.635Z,1520679464.635 [BPC1] No Fault, FailCount= 3
2018-03-10T10:58:15.014Z,1520679495.014 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-03-10T10:58:15.015Z,1520679495.015 [Default:CheckIn:C.Wait] Stopped
2018-03-10T10:58:15.015Z,1520679495.015 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-03-10T10:58:15.015Z,1520679495.015 [Default:CheckIn:D] Running Loop=1
2018-03-10T10:58:15.388Z,1520679495.388 [BPC1](FAULT): Failed to initialize
2018-03-10T10:58:15.388Z,1520679495.388 [BPC1] Communications Fault, FailCount= 4
2018-03-10T10:58:15.388Z,1520679495.388 [BPC1](ERROR): Communications Fault
2018-03-10T10:58:15.402Z,1520679495.402 [Default:CheckIn:D] Stopped
2018-03-10T10:58:15.402Z,1520679495.402 [Default:CheckIn:E] Running Loop=1
2018-03-10T10:58:15.412Z,1520679495.412 [CBIT](ERROR): Communications Fault in component: BPC1
2018-03-10T10:58:15.811Z,1520679495.811 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 338.958008 min 
2018-03-10T10:58:15.811Z,1520679495.811 [Default:CheckIn:E] Stopped
2018-03-10T10:58:15.811Z,1520679495.811 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-03-10T10:58:15.811Z,1520679495.811 [Default:CheckIn] Stopped
2018-03-10T10:58:15.812Z,1520679495.812 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-03-10T10:58:15.812Z,1520679495.812 [Default:CheckIn](INFO): Running loop #34
2018-03-10T10:58:15.812Z,1520679495.812 [Default:CheckIn] Running Loop=34
2018-03-10T10:58:15.812Z,1520679495.812 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-03-10T10:58:15.812Z,1520679495.812 [Default:CheckIn:Read_GPS] Running Loop=1
2018-03-10T10:58:19.238Z,1520679499.238 [NAL9602](INFO): Powering up
2018-03-10T10:58:19.304Z,1520679499.304 [CBIT](INFO): Clearing failed state for component BPC1
2018-03-10T10:58:19.304Z,1520679499.304 [BPC1] No Fault, FailCount= 4
2018-03-10T10:58:30.388Z,1520679510.388 [NAL9602](INFO): NAL9602 initialized
2018-03-10T10:58:31.192Z,1520679511.192 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-03-10T10:58:31.192Z,1520679511.192 [NAL9602] Data Fault, FailCount= 3
2018-03-10T10:58:31.192Z,1520679511.192 [NAL9602](ERROR): Data Fault
2018-03-10T10:58:31.288Z,1520679511.288 [CBIT](ERROR): Data Fault in component: NAL9602
2018-03-10T10:58:31.588Z,1520679511.588 [NAL9602](INFO): Powering down
2018-03-10T10:58:32.447Z,1520679512.447 [CBIT](INFO): Clearing failed state for component NAL9602
2018-03-10T10:58:32.447Z,1520679512.447 [NAL9602] No Fault, FailCount= 3
2018-03-10T10:59:01.988Z,1520679541.988 [NAL9602](INFO): Powering up NAL9602
2018-03-10T10:59:12.788Z,1520679552.788 [NAL9602](INFO): NAL9602 initialized
2018-03-10T10:59:19.780Z,1520679559.780 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T10:59:19.780Z,1520679559.780 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 37
2018-03-10T10:59:19.781Z,1520679559.781 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-10T10:59:19.793Z,1520679559.793 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-10T10:59:20.191Z,1520679560.191 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-10T10:59:20.191Z,1520679560.191 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 37
2018-03-10T10:59:20.556Z,1520679560.556 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-10T10:59:20.556Z,1520679560.556 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-10T10:59:20.557Z,1520679560.557 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-10T11:02:20.916Z,1520679740.916 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T11:02:20.917Z,1520679740.917 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 38
2018-03-10T11:02:20.917Z,1520679740.917 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-10T11:02:20.937Z,1520679740.937 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-10T11:02:21.332Z,1520679741.332 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-10T11:02:21.332Z,1520679741.332 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 38
2018-03-10T11:02:21.704Z,1520679741.704 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-10T11:02:21.704Z,1520679741.704 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-10T11:02:21.704Z,1520679741.704 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-10T11:03:16.109Z,1520679796.109 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-03-10T10:58:15.8Z
2018-03-10T11:03:16.109Z,1520679796.109 [Default:CheckIn:Read_GPS] Stopped
2018-03-10T11:03:16.109Z,1520679796.109 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-03-10T11:03:20.055Z,1520679800.055 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20180310T051512/Courier0136.lzma
2018-03-10T11:03:21.737Z,1520679801.737 [DataOverHttps](INFO): Moved sent file to Logs/20180310T051512/Courier0136.lzma.bak
2018-03-10T11:03:21.737Z,1520679801.737 [DataOverHttps](INFO): SBD MOMSN=8004113
2018-03-10T11:03:32.281Z,1520679812.281 [DataOverHttps](INFO): Sending 243 bytes from file Logs/20180310T051512/Express0137.lzma
2018-03-10T11:03:33.073Z,1520679813.073 [DataOverHttps](INFO): Moved sent file to Logs/20180310T051512/Express0137.lzma.bak
2018-03-10T11:03:33.073Z,1520679813.073 [DataOverHttps](INFO): SBD MOMSN=8004115
2018-03-10T11:03:33.830Z,1520679813.830 [Default:CheckIn:Read_Iridium] Stopped
2018-03-10T11:03:33.830Z,1520679813.830 [Default:CheckIn:C.Wait] Running Loop=1
2018-03-10T11:03:33.830Z,1520679813.830 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-03-10T11:04:15.493Z,1520679855.493 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session.
2018-03-10T11:04:46.248Z,1520679886.248 [NAL9602](INFO): Powering down
2018-03-10T11:05:21.953Z,1520679921.953 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T11:05:21.953Z,1520679921.953 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 39
2018-03-10T11:05:21.953Z,1520679921.953 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-10T11:05:21.966Z,1520679921.966 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-10T11:05:22.322Z,1520679922.322 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-10T11:05:22.322Z,1520679922.322 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 39
2018-03-10T11:05:22.725Z,1520679922.725 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-10T11:05:22.726Z,1520679922.726 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-10T11:05:22.726Z,1520679922.726 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-10T11:05:30.352Z,1520679930.352 [CBIT](DEBUG): EFC running - data check-sum false
2018-03-10T11:06:10.444Z,1520679970.444 [BPC1](ERROR): Failed to receive battery data
2018-03-10T11:06:10.444Z,1520679970.444 [BPC1] Communications Fault, FailCount= 1
2018-03-10T11:06:10.444Z,1520679970.444 [BPC1](ERROR): Communications Fault
2018-03-10T11:06:10.467Z,1520679970.467 [CBIT](ERROR): Communications Fault in component: BPC1
2018-03-10T11:06:11.674Z,1520679971.674 [CBIT](INFO): Clearing failed state for component BPC1
2018-03-10T11:06:11.674Z,1520679971.674 [BPC1] No Fault, FailCount= 1
2018-03-10T11:06:42.459Z,1520680002.459 [BPC1](FAULT): Failed to initialize
2018-03-10T11:06:42.459Z,1520680002.459 [BPC1] Communications Fault, FailCount= 2
2018-03-10T11:06:42.459Z,1520680002.459 [BPC1](ERROR): Communications Fault
2018-03-10T11:06:42.482Z,1520680002.482 [CBIT](ERROR): Communications Fault in component: BPC1
2018-03-10T11:06:43.684Z,1520680003.684 [CBIT](INFO): Clearing failed state for component BPC1
2018-03-10T11:06:43.684Z,1520680003.684 [BPC1] No Fault, FailCount= 2
2018-03-10T11:07:14.457Z,1520680034.457 [BPC1](FAULT): Failed to initialize
2018-03-10T11:07:14.458Z,1520680034.458 [BPC1] Communications Fault, FailCount= 3
2018-03-10T11:07:14.458Z,1520680034.458 [BPC1](ERROR): Communications Fault
2018-03-10T11:07:14.524Z,1520680034.524 [CBIT](ERROR): Communications Fault in component: BPC1
2018-03-10T11:07:15.687Z,1520680035.687 [CBIT](INFO): Clearing failed state for component BPC1
2018-03-10T11:07:15.687Z,1520680035.687 [BPC1] No Fault, FailCount= 3
2018-03-10T11:07:46.119Z,1520680066.119 [BPC1](FAULT): Failed to initialize
2018-03-10T11:07:46.120Z,1520680066.120 [BPC1] Communications Fault, FailCount= 4
2018-03-10T11:07:46.120Z,1520680066.120 [BPC1](ERROR): Communications Fault
2018-03-10T11:07:46.144Z,1520680066.144 [CBIT](ERROR): Communications Fault in component: BPC1
2018-03-10T11:07:47.344Z,1520680067.344 [CBIT](INFO): Clearing failed state for component BPC1
2018-03-10T11:07:47.344Z,1520680067.344 [BPC1] No Fault, FailCount= 4
2018-03-10T11:08:22.949Z,1520680102.949 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T11:08:22.949Z,1520680102.949 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 40
2018-03-10T11:08:22.949Z,1520680102.949 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-10T11:08:22.961Z,1520680102.961 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-10T11:08:23.353Z,1520680103.353 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-10T11:08:23.353Z,1520680103.353 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 40
2018-03-10T11:08:23.734Z,1520680103.734 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-10T11:08:23.740Z,1520680103.740 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-10T11:08:23.740Z,1520680103.740 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-10T11:08:34.154Z,1520680114.154 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-03-10T11:08:34.154Z,1520680114.154 [Default:CheckIn:C.Wait] Stopped
2018-03-10T11:08:34.154Z,1520680114.154 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-03-10T11:08:34.154Z,1520680114.154 [Default:CheckIn:D] Running Loop=1
2018-03-10T11:08:34.533Z,1520680114.533 [Default:CheckIn:D] Stopped
2018-03-10T11:08:34.533Z,1520680114.533 [Default:CheckIn:E] Running Loop=1
2018-03-10T11:08:34.938Z,1520680114.938 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 349.276888 min 
2018-03-10T11:08:34.938Z,1520680114.938 [Default:CheckIn:E] Stopped
2018-03-10T11:08:34.938Z,1520680114.938 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-03-10T11:08:34.938Z,1520680114.938 [Default:CheckIn] Stopped
2018-03-10T11:08:34.938Z,1520680114.938 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-03-10T11:08:34.939Z,1520680114.939 [Default:CheckIn](INFO): Running loop #35
2018-03-10T11:08:34.939Z,1520680114.939 [Default:CheckIn] Running Loop=35
2018-03-10T11:08:34.939Z,1520680114.939 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-03-10T11:08:34.939Z,1520680114.939 [Default:CheckIn:Read_GPS] Running Loop=1
2018-03-10T11:08:38.338Z,1520680118.338 [NAL9602](INFO): Powering up
2018-03-10T11:08:49.485Z,1520680129.485 [NAL9602](INFO): NAL9602 initialized
2018-03-10T11:09:21.481Z,1520680161.481 [NAL9602](ERROR): Failed to receive proper response when querying signal strength for MT queue check.
2018-03-10T11:09:21.559Z,1520680161.559 [NAL9602](FAULT): received: 
+CSQ:0

OK35, 0, 0, 0, 0

OK
2018-03-10T11:09:21.559Z,1520680161.559 [NAL9602] Data Fault, FailCount= 4
2018-03-10T11:09:21.559Z,1520680161.559 [NAL9602](ERROR): Data Fault
2018-03-10T11:09:21.641Z,1520680161.641 [CBIT](ERROR): Data Fault in component: NAL9602
2018-03-10T11:09:21.881Z,1520680161.881 [NAL9602](INFO): Powering down
2018-03-10T11:09:22.763Z,1520680162.763 [CBIT](INFO): Clearing failed state for component NAL9602
2018-03-10T11:09:22.763Z,1520680162.763 [NAL9602] No Fault, FailCount= 4
2018-03-10T11:09:51.937Z,1520680191.937 [NAL9602](INFO): Powering up NAL9602
2018-03-10T11:10:03.140Z,1520680203.140 [NAL9602](INFO): NAL9602 initialized
2018-03-10T11:10:03.934Z,1520680203.934 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-03-10T11:10:03.934Z,1520680203.934 [NAL9602] Data Fault, FailCount= 5
2018-03-10T11:10:03.934Z,1520680203.934 [NAL9602](ERROR): Data Fault
2018-03-10T11:10:04.029Z,1520680204.029 [CBIT](ERROR): Data Fault in component: NAL9602
2018-03-10T11:10:04.029Z,1520680204.029 [CBIT](CRITICAL): Data Fault in component: NAL9602
2018-03-10T11:10:04.344Z,1520680204.344 [NAL9602](INFO): Powering down
2018-03-10T11:10:04.435Z,1520680204.435 [CBIT](INFO): Critical error at 20180310T111004
2018-03-10T11:11:24.101Z,1520680284.101 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T11:11:24.101Z,1520680284.101 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 41
2018-03-10T11:11:24.102Z,1520680284.102 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-10T11:11:24.126Z,1520680284.126 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-10T11:11:24.528Z,1520680284.528 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-10T11:11:24.528Z,1520680284.528 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 41
2018-03-10T11:11:24.899Z,1520680284.899 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-10T11:11:24.900Z,1520680284.900 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-10T11:11:24.900Z,1520680284.900 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-10T11:12:04.181Z,1520680324.181 [CBIT](INFO): Clearing failed state for component NAL9602
2018-03-10T11:12:04.181Z,1520680324.181 [NAL9602] No Fault, FailCount= 5
2018-03-10T11:12:04.512Z,1520680324.512 [NAL9602](INFO): Powering up NAL9602
2018-03-10T11:12:15.712Z,1520680335.712 [NAL9602](INFO): NAL9602 initialized
2018-03-10T11:13:35.047Z,1520680415.047 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-03-10T11:08:34.9Z
2018-03-10T11:13:35.047Z,1520680415.047 [Default:CheckIn:Read_GPS] Stopped
2018-03-10T11:13:35.047Z,1520680415.047 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-03-10T11:13:39.315Z,1520680419.315 [DataOverHttps](INFO): Sending 69 bytes from file Logs/20180310T051512/Courier0140.lzma
2018-03-10T11:13:40.109Z,1520680420.109 [DataOverHttps](INFO): Moved sent file to Logs/20180310T051512/Courier0140.lzma.bak
2018-03-10T11:13:40.109Z,1520680420.109 [DataOverHttps](INFO): SBD MOMSN=8004167
2018-03-10T11:13:50.556Z,1520680430.556 [DataOverHttps](INFO): Sending 281 bytes from file Logs/20180310T051512/Express0141.lzma
2018-03-10T11:13:51.349Z,1520680431.349 [DataOverHttps](INFO): Moved sent file to Logs/20180310T051512/Express0141.lzma.bak
2018-03-10T11:13:51.350Z,1520680431.350 [DataOverHttps](INFO): SBD MOMSN=8004170
2018-03-10T11:13:52.107Z,1520680432.107 [Default:CheckIn:Read_Iridium] Stopped
2018-03-10T11:13:52.107Z,1520680432.107 [Default:CheckIn:C.Wait] Running Loop=1
2018-03-10T11:13:52.107Z,1520680432.107 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-03-10T11:13:55.789Z,1520680435.789 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session.
2018-03-10T11:14:25.152Z,1520680465.152 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T11:14:25.152Z,1520680465.152 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 42
2018-03-10T11:14:25.152Z,1520680465.152 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-10T11:14:25.164Z,1520680465.164 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-10T11:14:25.606Z,1520680465.606 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-10T11:14:25.606Z,1520680465.606 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 42
2018-03-10T11:14:25.956Z,1520680465.956 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-10T11:14:25.956Z,1520680465.956 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-10T11:14:25.956Z,1520680465.956 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-10T11:14:26.296Z,1520680466.296 [NAL9602](INFO): Powering down
2018-03-10T11:15:30.452Z,1520680530.452 [CBIT](DEBUG): EFC running - data check-sum false
2018-03-10T11:15:56.023Z,1520680556.023 [BPC1](ERROR): Failed to receive battery data
2018-03-10T11:15:56.023Z,1520680556.023 [BPC1] Communications Fault, FailCount= 1
2018-03-10T11:15:56.023Z,1520680556.023 [BPC1](ERROR): Communications Fault
2018-03-10T11:15:56.103Z,1520680556.103 [CBIT](ERROR): Communications Fault in component: BPC1
2018-03-10T11:15:56.985Z,1520680556.985 [CBIT](INFO): Clearing failed state for component BPC1
2018-03-10T11:15:56.985Z,1520680556.985 [BPC1] No Fault, FailCount= 1
2018-03-10T11:16:27.773Z,1520680587.773 [BPC1](FAULT): Failed to initialize
2018-03-10T11:16:27.773Z,1520680587.773 [BPC1] Communications Fault, FailCount= 2
2018-03-10T11:16:27.773Z,1520680587.773 [BPC1](ERROR): Communications Fault
2018-03-10T11:16:27.826Z,1520680587.826 [CBIT](ERROR): Communications Fault in component: BPC1
2018-03-10T11:16:29.010Z,1520680589.010 [CBIT](INFO): Clearing failed state for component BPC1
2018-03-10T11:16:29.010Z,1520680589.010 [BPC1] No Fault, FailCount= 2
2018-03-10T11:16:52.603Z,1520680612.603 [CBIT](IMPORTANT): Beginning ground fault scan
2018-03-10T11:16:59.570Z,1520680619.570 [BPC1](FAULT): Failed to initialize
2018-03-10T11:16:59.570Z,1520680619.570 [BPC1] Communications Fault, FailCount= 3
2018-03-10T11:16:59.570Z,1520680619.570 [BPC1](ERROR): Communications Fault
2018-03-10T11:16:59.594Z,1520680619.594 [CBIT](ERROR): Communications Fault in component: BPC1
2018-03-10T11:17:00.798Z,1520680620.798 [CBIT](INFO): Clearing failed state for component BPC1
2018-03-10T11:17:00.798Z,1520680620.798 [BPC1] No Fault, FailCount= 3
2018-03-10T11:17:05.609Z,1520680625.609 [CBIT](IMPORTANT): No ground fault detected
mA:
CHAN A0 (Batt): -0.008088
CHAN A1 (24V): -0.011893
CHAN A2 (12V): 0.000068
CHAN A3 (5V): -0.001285
CHAN B0 (3.3V): -0.000352
CHAN B1 (3.15aV): -0.001279
CHAN B2 (3.15bV): -0.001423
CHAN B3 (GND): -0.002620
OPEN: 0.003448
Full Scale Calc: 4.765 mA, -1.589 mA
2018-03-10T11:17:25.995Z,1520680645.995 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T11:17:25.995Z,1520680645.995 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 43
2018-03-10T11:17:25.995Z,1520680645.995 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-10T11:17:26.008Z,1520680646.008 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-10T11:17:26.404Z,1520680646.404 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-10T11:17:26.404Z,1520680646.404 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 43
2018-03-10T11:17:26.797Z,1520680646.797 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-10T11:17:26.798Z,1520680646.798 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-10T11:17:26.798Z,1520680646.798 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-10T11:17:31.573Z,1520680651.573 [BPC1](FAULT): Failed to initialize
2018-03-10T11:17:31.573Z,1520680651.573 [BPC1] Communications Fault, FailCount= 4
2018-03-10T11:17:31.573Z,1520680651.573 [BPC1](ERROR): Communications Fault
2018-03-10T11:17:31.624Z,1520680651.624 [CBIT](ERROR): Communications Fault in component: BPC1
2018-03-10T11:17:32.810Z,1520680652.810 [CBIT](INFO): Clearing failed state for component BPC1
2018-03-10T11:17:32.810Z,1520680652.810 [BPC1] No Fault, FailCount= 4
2018-03-10T11:18:28.864Z,1520680708.864 [BPC1](ERROR): Bank A: No match for stick 4 serial number:1717 in the onboard configuration file.
2018-03-10T11:18:28.864Z,1520680708.864 [BPC1](ERROR): Failed to parse Bank A battery data
2018-03-10T11:18:28.865Z,1520680708.865 [BPC1] Data Fault, FailCount= 1
2018-03-10T11:18:28.865Z,1520680708.865 [BPC1](ERROR): Data Fault
2018-03-10T11:18:28.888Z,1520680708.888 [CBIT](ERROR): Data Fault in component: BPC1
2018-03-10T11:18:30.091Z,1520680710.091 [CBIT](INFO): Clearing failed state for component BPC1
2018-03-10T11:18:30.091Z,1520680710.091 [BPC1] No Fault, FailCount= 1
2018-03-10T11:18:52.468Z,1520680732.468 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-03-10T11:18:52.469Z,1520680732.469 [Default:CheckIn:C.Wait] Stopped
2018-03-10T11:18:52.469Z,1520680732.469 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-03-10T11:18:52.469Z,1520680732.469 [Default:CheckIn:D] Running Loop=1
2018-03-10T11:18:52.881Z,1520680732.881 [Default:CheckIn:D] Stopped
2018-03-10T11:18:52.881Z,1520680732.881 [Default:CheckIn:E] Running Loop=1
2018-03-10T11:18:53.276Z,1520680733.276 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 359.582650 min 
2018-03-10T11:18:53.276Z,1520680733.276 [Default:CheckIn:E] Stopped
2018-03-10T11:18:53.277Z,1520680733.277 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-03-10T11:18:53.277Z,1520680733.277 [Default:CheckIn] Stopped
2018-03-10T11:18:53.277Z,1520680733.277 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-03-10T11:18:53.277Z,1520680733.277 [Default:CheckIn](INFO): Running loop #36
2018-03-10T11:18:53.277Z,1520680733.277 [Default:CheckIn] Running Loop=36
2018-03-10T11:18:53.277Z,1520680733.277 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-03-10T11:18:53.277Z,1520680733.277 [Default:CheckIn:Read_GPS] Running Loop=1
2018-03-10T11:18:56.614Z,1520680736.614 [NAL9602](INFO): Powering up
2018-03-10T11:19:07.800Z,1520680747.800 [NAL9602](INFO): NAL9602 initialized
2018-03-10T11:19:39.796Z,1520680779.796 [NAL9602](ERROR): Failed to receive proper response when querying signal strength for MT queue check.
2018-03-10T11:19:39.879Z,1520680779.879 [NAL9602](FAULT): received: 
+CSQ:0

OK35, 0, 0, 0, 0

OK
2018-03-10T11:19:39.879Z,1520680779.879 [NAL9602] Data Fault, FailCount= 1
2018-03-10T11:19:39.879Z,1520680779.879 [NAL9602](ERROR): Data Fault
2018-03-10T11:19:39.984Z,1520680779.984 [CBIT](ERROR): Data Fault in component: NAL9602
2018-03-10T11:19:40.204Z,1520680780.204 [NAL9602](INFO): Powering down
2018-03-10T11:19:41.084Z,1520680781.084 [CBIT](INFO): Clearing failed state for component NAL9602
2018-03-10T11:19:41.084Z,1520680781.084 [NAL9602] No Fault, FailCount= 1
2018-03-10T11:20:10.336Z,1520680810.336 [NAL9602](INFO): Powering up NAL9602
2018-03-10T11:20:21.536Z,1520680821.536 [NAL9602](INFO): NAL9602 initialized
2018-03-10T11:20:27.188Z,1520680827.188 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T11:20:27.188Z,1520680827.188 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 44
2018-03-10T11:20:27.188Z,1520680827.188 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-10T11:20:27.201Z,1520680827.201 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-10T11:20:27.592Z,1520680827.592 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-10T11:20:27.592Z,1520680827.592 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 44
2018-03-10T11:20:27.981Z,1520680827.981 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-10T11:20:27.981Z,1520680827.981 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-10T11:20:27.981Z,1520680827.981 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-10T11:23:28.035Z,1520681008.035 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T11:23:28.035Z,1520681008.035 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 45
2018-03-10T11:23:28.035Z,1520681008.035 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-10T11:23:28.048Z,1520681008.048 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-10T11:23:28.450Z,1520681008.450 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-10T11:23:28.450Z,1520681008.450 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 45
2018-03-10T11:23:28.826Z,1520681008.826 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-10T11:23:28.826Z,1520681008.826 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-10T11:23:28.827Z,1520681008.827 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-10T11:23:53.656Z,1520681033.656 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-03-10T11:18:53.3Z
2018-03-10T11:23:53.656Z,1520681033.656 [Default:CheckIn:Read_GPS] Stopped
2018-03-10T11:23:53.656Z,1520681033.656 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-03-10T11:23:57.871Z,1520681037.871 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20180310T051512/Courier0144.lzma
2018-03-10T11:23:58.665Z,1520681038.665 [DataOverHttps](INFO): Moved sent file to Logs/20180310T051512/Courier0144.lzma.bak
2018-03-10T11:23:58.665Z,1520681038.665 [DataOverHttps](INFO): SBD MOMSN=8004238
2018-03-10T11:24:08.577Z,1520681048.577 [DataOverHttps](INFO): Sending 447 bytes from file Logs/20180310T051512/Express0145.lzma
2018-03-10T11:24:09.321Z,1520681049.321 [DataOverHttps](INFO): Moved sent file to Logs/20180310T051512/Express0145.lzma.bak
2018-03-10T11:24:09.321Z,1520681049.321 [DataOverHttps](INFO): SBD MOMSN=8004240
2018-03-10T11:24:10.046Z,1520681050.046 [Default:CheckIn:Read_Iridium] Stopped
2018-03-10T11:24:10.046Z,1520681050.046 [Default:CheckIn:C.Wait] Running Loop=1
2018-03-10T11:24:10.046Z,1520681050.046 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-03-10T11:24:11.321Z,1520681051.321 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session.
2018-03-10T11:24:41.788Z,1520681081.788 [NAL9602](INFO): Powering down
2018-03-10T11:25:28.699Z,1520681128.699 [BPC1](ERROR): Failed to receive battery data
2018-03-10T11:25:28.699Z,1520681128.699 [BPC1] Communications Fault, FailCount= 1
2018-03-10T11:25:28.699Z,1520681128.699 [BPC1](ERROR): Communications Fault
2018-03-10T11:25:28.760Z,1520681128.760 [CBIT](ERROR): Communications Fault in component: BPC1
2018-03-10T11:25:29.971Z,1520681129.971 [CBIT](INFO): Clearing failed state for component BPC1
2018-03-10T11:25:29.971Z,1520681129.971 [BPC1] No Fault, FailCount= 1
2018-03-10T11:25:30.770Z,1520681130.770 [CBIT](DEBUG): EFC running - data check-sum false
2018-03-10T11:26:00.689Z,1520681160.689 [BPC1](FAULT): Failed to initialize
2018-03-10T11:26:00.689Z,1520681160.689 [BPC1] Communications Fault, FailCount= 2
2018-03-10T11:26:00.689Z,1520681160.689 [BPC1](ERROR): Communications Fault
2018-03-10T11:26:00.758Z,1520681160.758 [CBIT](ERROR): Communications Fault in component: BPC1
2018-03-10T11:26:01.952Z,1520681161.952 [CBIT](INFO): Clearing failed state for component BPC1
2018-03-10T11:26:01.952Z,1520681161.952 [BPC1] No Fault, FailCount= 2
2018-03-10T11:26:28.832Z,1520681188.832 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T11:26:28.832Z,1520681188.832 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 46
2018-03-10T11:26:28.833Z,1520681188.833 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-10T11:26:28.864Z,1520681188.864 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-10T11:26:29.245Z,1520681189.245 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-10T11:26:29.245Z,1520681189.245 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 46
2018-03-10T11:26:29.610Z,1520681189.610 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-10T11:26:29.611Z,1520681189.611 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-10T11:26:29.611Z,1520681189.611 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-10T11:26:32.406Z,1520681192.406 [BPC1](FAULT): Failed to initialize
2018-03-10T11:26:32.406Z,1520681192.406 [BPC1] Communications Fault, FailCount= 3
2018-03-10T11:26:32.406Z,1520681192.406 [BPC1](ERROR): Communications Fault
2018-03-10T11:26:32.453Z,1520681192.453 [CBIT](ERROR): Communications Fault in component: BPC1
2018-03-10T11:26:33.657Z,1520681193.657 [CBIT](INFO): Clearing failed state for component BPC1
2018-03-10T11:26:33.657Z,1520681193.657 [BPC1] No Fault, FailCount= 3
2018-03-10T11:27:04.401Z,1520681224.401 [BPC1](FAULT): Failed to initialize
2018-03-10T11:27:04.402Z,1520681224.402 [BPC1] Communications Fault, FailCount= 4
2018-03-10T11:27:04.402Z,1520681224.402 [BPC1](ERROR): Communications Fault
2018-03-10T11:27:04.425Z,1520681224.425 [CBIT](ERROR): Communications Fault in component: BPC1
2018-03-10T11:27:05.624Z,1520681225.624 [CBIT](INFO): Clearing failed state for component BPC1
2018-03-10T11:27:05.624Z,1520681225.624 [BPC1] No Fault, FailCount= 4
2018-03-10T11:28:49.476Z,1520681329.476 [BPC1](ERROR): Bank A: No match for stick 5 serial number:1717 in the onboard configuration file.
2018-03-10T11:28:49.476Z,1520681329.476 [BPC1](ERROR): Failed to parse Bank A battery data
2018-03-10T11:28:49.476Z,1520681329.476 [BPC1] Data Fault, FailCount= 1
2018-03-10T11:28:49.476Z,1520681329.476 [BPC1](ERROR): Data Fault
2018-03-10T11:28:49.543Z,1520681329.543 [CBIT](ERROR): Data Fault in component: BPC1
2018-03-10T11:28:50.695Z,1520681330.695 [CBIT](INFO): Clearing failed state for component BPC1
2018-03-10T11:28:50.696Z,1520681330.696 [BPC1] No Fault, FailCount= 1
2018-03-10T11:29:10.295Z,1520681350.295 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-03-10T11:29:10.295Z,1520681350.295 [Default:CheckIn:C.Wait] Stopped
2018-03-10T11:29:10.295Z,1520681350.295 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-03-10T11:29:10.295Z,1520681350.295 [Default:CheckIn:D] Running Loop=1
2018-03-10T11:29:10.699Z,1520681350.699 [Default:CheckIn:D] Stopped
2018-03-10T11:29:10.699Z,1520681350.699 [Default:CheckIn:E] Running Loop=1
2018-03-10T11:29:11.097Z,1520681351.097 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 369.879655 min 
2018-03-10T11:29:11.097Z,1520681351.097 [Default:CheckIn:E] Stopped
2018-03-10T11:29:11.097Z,1520681351.097 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-03-10T11:29:11.097Z,1520681351.097 [Default:CheckIn] Stopped
2018-03-10T11:29:11.097Z,1520681351.097 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-03-10T11:29:11.097Z,1520681351.097 [Default:CheckIn](INFO): Running loop #37
2018-03-10T11:29:11.097Z,1520681351.097 [Default:CheckIn] Running Loop=37
2018-03-10T11:29:11.098Z,1520681351.098 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-03-10T11:29:11.098Z,1520681351.098 [Default:CheckIn:Read_GPS] Running Loop=1
2018-03-10T11:29:14.305Z,1520681354.305 [NAL9602](INFO): Powering up
2018-03-10T11:29:25.460Z,1520681365.460 [NAL9602](INFO): NAL9602 initialized
2018-03-10T11:29:26.264Z,1520681366.264 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-03-10T11:29:26.264Z,1520681366.264 [NAL9602] Data Fault, FailCount= 2
2018-03-10T11:29:26.264Z,1520681366.264 [NAL9602](ERROR): Data Fault
2018-03-10T11:29:26.366Z,1520681366.366 [CBIT](ERROR): Data Fault in component: NAL9602
2018-03-10T11:29:26.660Z,1520681366.660 [NAL9602](INFO): Powering down
2018-03-10T11:29:27.557Z,1520681367.557 [CBIT](INFO): Clearing failed state for component NAL9602
2018-03-10T11:29:27.557Z,1520681367.557 [NAL9602] No Fault, FailCount= 2
2018-03-10T11:29:29.948Z,1520681369.948 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T11:29:29.948Z,1520681369.948 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 47
2018-03-10T11:29:29.948Z,1520681369.948 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-10T11:29:29.982Z,1520681369.982 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-10T11:29:30.351Z,1520681370.351 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-10T11:29:30.352Z,1520681370.352 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 47
2018-03-10T11:29:30.756Z,1520681370.756 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-10T11:29:30.756Z,1520681370.756 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-10T11:29:30.757Z,1520681370.757 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-10T11:29:57.056Z,1520681397.056 [NAL9602](INFO): Powering up NAL9602
2018-03-10T11:30:07.860Z,1520681407.860 [NAL9602](INFO): NAL9602 initialized
2018-03-10T11:31:33.764Z,1520681493.764 [BPC1](ERROR): Bank B: No match for stick 0 serial number:1717 in the onboard configuration file.
2018-03-10T11:31:33.765Z,1520681493.765 [BPC1](ERROR): Failed to parse Bank B battery data
2018-03-10T11:31:33.765Z,1520681493.765 [BPC1] Data Fault, FailCount= 1
2018-03-10T11:31:33.765Z,1520681493.765 [BPC1](ERROR): Data Fault
2018-03-10T11:31:33.812Z,1520681493.812 [CBIT](ERROR): Data Fault in component: BPC1
2018-03-10T11:31:34.993Z,1520681494.993 [CBIT](INFO): Clearing failed state for component BPC1
2018-03-10T11:31:34.993Z,1520681494.993 [BPC1] No Fault, FailCount= 1
2018-03-10T11:32:30.773Z,1520681550.773 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T11:32:30.773Z,1520681550.773 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 48
2018-03-10T11:32:30.773Z,1520681550.773 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-10T11:32:30.785Z,1520681550.785 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-10T11:32:31.174Z,1520681551.174 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-10T11:32:31.174Z,1520681551.174 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 48
2018-03-10T11:32:31.576Z,1520681551.576 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-10T11:32:31.576Z,1520681551.576 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-10T11:32:31.576Z,1520681551.576 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-10T11:34:11.268Z,1520681651.268 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-03-10T11:29:11.1Z
2018-03-10T11:34:11.268Z,1520681651.268 [Default:CheckIn:Read_GPS] Stopped
2018-03-10T11:34:11.268Z,1520681651.268 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-03-10T11:34:15.547Z,1520681655.547 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20180310T051512/Courier0148.lzma
2018-03-10T11:34:16.349Z,1520681656.349 [DataOverHttps](INFO): Moved sent file to Logs/20180310T051512/Courier0148.lzma.bak
2018-03-10T11:34:16.349Z,1520681656.349 [DataOverHttps](INFO): SBD MOMSN=8004305
2018-03-10T11:34:28.080Z,1520681668.080 [DataOverHttps](INFO): Sending 245 bytes from file Logs/20180310T051512/Express0149.lzma
2018-03-10T11:34:28.861Z,1520681668.861 [DataOverHttps](INFO): Moved sent file to Logs/20180310T051512/Express0149.lzma.bak
2018-03-10T11:34:28.861Z,1520681668.861 [DataOverHttps](INFO): SBD MOMSN=8004307
2018-03-10T11:34:29.610Z,1520681669.610 [Default:CheckIn:Read_Iridium] Stopped
2018-03-10T11:34:29.610Z,1520681669.610 [Default:CheckIn:C.Wait] Running Loop=1
2018-03-10T11:34:29.610Z,1520681669.610 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-03-10T11:35:10.580Z,1520681710.580 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session.
2018-03-10T11:35:17.818Z,1520681717.818 [BPC1](ERROR): Failed to receive battery data
2018-03-10T11:35:17.818Z,1520681717.818 [BPC1] Communications Fault, FailCount= 1
2018-03-10T11:35:17.818Z,1520681717.818 [BPC1](ERROR): Communications Fault
2018-03-10T11:35:17.880Z,1520681717.880 [CBIT](ERROR): Communications Fault in component: BPC1
2018-03-10T11:35:19.038Z,1520681719.038 [CBIT](INFO): Clearing failed state for component BPC1
2018-03-10T11:35:19.039Z,1520681719.039 [BPC1] No Fault, FailCount= 1
2018-03-10T11:35:33.482Z,1520681733.482 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T11:35:33.482Z,1520681733.482 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 49
2018-03-10T11:35:33.482Z,1520681733.482 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-10T11:35:33.494Z,1520681733.494 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-10T11:35:33.495Z,1520681733.495 [CBIT](DEBUG): EFC running - data check-sum false
2018-03-10T11:35:33.647Z,1520681733.647 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-10T11:35:33.647Z,1520681733.647 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 49
2018-03-10T11:35:33.966Z,1520681733.966 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-10T11:35:33.967Z,1520681733.967 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-10T11:35:33.967Z,1520681733.967 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-10T11:35:41.121Z,1520681741.121 [NAL9602](INFO): Powering down
2018-03-10T11:35:49.570Z,1520681749.570 [BPC1](FAULT): Failed to initialize
2018-03-10T11:35:49.570Z,1520681749.570 [BPC1] Communications Fault, FailCount= 2
2018-03-10T11:35:49.570Z,1520681749.570 [BPC1](ERROR): Communications Fault
2018-03-10T11:35:49.669Z,1520681749.669 [CBIT](ERROR): Communications Fault in component: BPC1
2018-03-10T11:35:50.794Z,1520681750.794 [CBIT](INFO): Clearing failed state for component BPC1
2018-03-10T11:35:50.794Z,1520681750.794 [BPC1] No Fault, FailCount= 2
2018-03-10T11:36:21.571Z,1520681781.571 [BPC1](FAULT): Failed to initialize
2018-03-10T11:36:21.571Z,1520681781.571 [BPC1] Communications Fault, FailCount= 3
2018-03-10T11:36:21.571Z,1520681781.571 [BPC1](ERROR): Communications Fault
2018-03-10T11:36:21.594Z,1520681781.594 [CBIT](ERROR): Communications Fault in component: BPC1
2018-03-10T11:36:22.784Z,1520681782.784 [CBIT](INFO): Clearing failed state for component BPC1
2018-03-10T11:36:22.784Z,1520681782.784 [BPC1] No Fault, FailCount= 3
2018-03-10T11:36:53.587Z,1520681813.587 [BPC1](FAULT): Failed to initialize
2018-03-10T11:36:53.588Z,1520681813.588 [BPC1] Communications Fault, FailCount= 4
2018-03-10T11:36:53.588Z,1520681813.588 [BPC1](ERROR): Communications Fault
2018-03-10T11:36:53.610Z,1520681813.610 [CBIT](ERROR): Communications Fault in component: BPC1
2018-03-10T11:36:54.855Z,1520681814.855 [CBIT](INFO): Clearing failed state for component BPC1
2018-03-10T11:36:54.855Z,1520681814.855 [BPC1] No Fault, FailCount= 4
2018-03-10T11:38:34.194Z,1520681914.194 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T11:38:34.195Z,1520681914.195 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 50
2018-03-10T11:38:34.195Z,1520681914.195 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-10T11:38:34.207Z,1520681914.207 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-10T11:38:34.601Z,1520681914.601 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-10T11:38:34.601Z,1520681914.601 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 50
2018-03-10T11:38:34.991Z,1520681914.991 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-10T11:38:34.992Z,1520681914.992 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-10T11:38:34.992Z,1520681914.992 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-10T11:39:29.785Z,1520681969.785 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-03-10T11:39:29.786Z,1520681969.786 [Default:CheckIn:C.Wait] Stopped
2018-03-10T11:39:29.786Z,1520681969.786 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-03-10T11:39:29.786Z,1520681969.786 [Default:CheckIn:D] Running Loop=1
2018-03-10T11:39:30.188Z,1520681970.188 [Default:CheckIn:D] Stopped
2018-03-10T11:39:30.188Z,1520681970.188 [Default:CheckIn:E] Running Loop=1
2018-03-10T11:39:30.596Z,1520681970.596 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 380.204460 min 
2018-03-10T11:39:30.597Z,1520681970.597 [Default:CheckIn:E] Stopped
2018-03-10T11:39:30.597Z,1520681970.597 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-03-10T11:39:30.597Z,1520681970.597 [Default:CheckIn] Stopped
2018-03-10T11:39:30.597Z,1520681970.597 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-03-10T11:39:30.597Z,1520681970.597 [Default:CheckIn](INFO): Running loop #38
2018-03-10T11:39:30.597Z,1520681970.597 [Default:CheckIn] Running Loop=38
2018-03-10T11:39:30.597Z,1520681970.597 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-03-10T11:39:30.597Z,1520681970.597 [Default:CheckIn:Read_GPS] Running Loop=1
2018-03-10T11:39:33.943Z,1520681973.943 [NAL9602](INFO): Powering up
2018-03-10T11:39:45.120Z,1520681985.120 [NAL9602](INFO): NAL9602 initialized
2018-03-10T11:41:34.997Z,1520682094.997 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T11:41:34.997Z,1520682094.997 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 51
2018-03-10T11:41:34.997Z,1520682094.997 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-10T11:41:35.018Z,1520682095.018 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-10T11:41:35.373Z,1520682095.373 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-10T11:41:35.373Z,1520682095.373 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 51
2018-03-10T11:41:35.763Z,1520682095.763 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-10T11:41:35.764Z,1520682095.764 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-10T11:41:35.764Z,1520682095.764 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-10T11:44:30.837Z,1520682270.837 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-03-10T11:39:30.6Z
2018-03-10T11:44:30.837Z,1520682270.837 [Default:CheckIn:Read_GPS] Stopped
2018-03-10T11:44:30.837Z,1520682270.837 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-03-10T11:44:35.404Z,1520682275.404 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20180310T051512/Courier0152.lzma
2018-03-10T11:44:35.860Z,1520682275.860 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T11:44:35.860Z,1520682275.860 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 52
2018-03-10T11:44:35.860Z,1520682275.860 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-10T11:44:35.873Z,1520682275.873 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-10T11:44:36.205Z,1520682276.205 [DataOverHttps](INFO): Moved sent file to Logs/20180310T051512/Courier0152.lzma.bak
2018-03-10T11:44:36.205Z,1520682276.205 [DataOverHttps](INFO): SBD MOMSN=8004366
2018-03-10T11:44:36.295Z,1520682276.295 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-10T11:44:36.295Z,1520682276.295 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 52
2018-03-10T11:44:36.916Z,1520682276.916 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-10T11:44:36.917Z,1520682276.917 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-10T11:44:36.917Z,1520682276.917 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-10T11:44:46.415Z,1520682286.415 [DataOverHttps](INFO): Sending 227 bytes from file Logs/20180310T051512/Express0153.lzma
2018-03-10T11:44:47.197Z,1520682287.197 [DataOverHttps](INFO): Moved sent file to Logs/20180310T051512/Express0153.lzma.bak
2018-03-10T11:44:47.197Z,1520682287.197 [DataOverHttps](INFO): SBD MOMSN=8004368
2018-03-10T11:44:47.974Z,1520682287.974 [Default:CheckIn:Read_Iridium] Stopped
2018-03-10T11:44:47.974Z,1520682287.974 [Default:CheckIn:C.Wait] Running Loop=1
2018-03-10T11:44:47.974Z,1520682287.974 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-03-10T11:44:51.180Z,1520682291.180 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session.
2018-03-10T11:44:57.720Z,1520682297.720 [BPC1](ERROR): Failed to receive battery data
2018-03-10T11:44:57.720Z,1520682297.720 [BPC1] Communications Fault, FailCount= 1
2018-03-10T11:44:57.720Z,1520682297.720 [BPC1](ERROR): Communications Fault
2018-03-10T11:44:57.773Z,1520682297.773 [CBIT](ERROR): Communications Fault in component: BPC1
2018-03-10T11:44:58.944Z,1520682298.944 [CBIT](INFO): Clearing failed state for component BPC1
2018-03-10T11:44:58.944Z,1520682298.944 [BPC1] No Fault, FailCount= 1
2018-03-10T11:45:21.684Z,1520682321.684 [NAL9602](INFO): Powering down
2018-03-10T11:45:29.468Z,1520682329.468 [BPC1](FAULT): Failed to initialize
2018-03-10T11:45:29.468Z,1520682329.468 [BPC1] Communications Fault, FailCount= 2
2018-03-10T11:45:29.468Z,1520682329.468 [BPC1](ERROR): Communications Fault
2018-03-10T11:45:29.545Z,1520682329.545 [CBIT](ERROR): Communications Fault in component: BPC1
2018-03-10T11:45:30.550Z,1520682330.550 [CBIT](INFO): Clearing failed state for component BPC1
2018-03-10T11:45:30.550Z,1520682330.550 [BPC1] No Fault, FailCount= 2
2018-03-10T11:45:33.751Z,1520682333.751 [CBIT](DEBUG): EFC running - data check-sum false
2018-03-10T11:46:00.973Z,1520682360.973 [BPC1](FAULT): Failed to initialize
2018-03-10T11:46:00.973Z,1520682360.973 [BPC1] Communications Fault, FailCount= 3
2018-03-10T11:46:00.973Z,1520682360.973 [BPC1](ERROR): Communications Fault
2018-03-10T11:46:01.021Z,1520682361.021 [CBIT](ERROR): Communications Fault in component: BPC1
2018-03-10T11:46:02.202Z,1520682362.202 [CBIT](INFO): Clearing failed state for component BPC1
2018-03-10T11:46:02.202Z,1520682362.202 [BPC1] No Fault, FailCount= 3
2018-03-10T11:46:32.962Z,1520682392.962 [BPC1](FAULT): Failed to initialize
2018-03-10T11:46:32.962Z,1520682392.962 [BPC1] Communications Fault, FailCount= 4
2018-03-10T11:46:32.962Z,1520682392.962 [BPC1](ERROR): Communications Fault
2018-03-10T11:46:33.020Z,1520682393.020 [CBIT](ERROR): Communications Fault in component: BPC1
2018-03-10T11:46:34.215Z,1520682394.215 [CBIT](INFO): Clearing failed state for component BPC1
2018-03-10T11:46:34.215Z,1520682394.215 [BPC1] No Fault, FailCount= 4
2018-03-10T11:47:37.141Z,1520682457.141 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T11:47:37.141Z,1520682457.141 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 53
2018-03-10T11:47:37.141Z,1520682457.141 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-10T11:47:37.153Z,1520682457.153 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-10T11:47:37.575Z,1520682457.575 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-10T11:47:37.575Z,1520682457.575 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 53
2018-03-10T11:47:37.951Z,1520682457.951 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-10T11:47:37.951Z,1520682457.951 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-10T11:47:37.952Z,1520682457.952 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-10T11:49:48.425Z,1520682588.425 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-03-10T11:49:48.426Z,1520682588.426 [Default:CheckIn:C.Wait] Stopped
2018-03-10T11:49:48.426Z,1520682588.426 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-03-10T11:49:48.426Z,1520682588.426 [Default:CheckIn:D] Running Loop=1
2018-03-10T11:49:48.821Z,1520682588.821 [Default:CheckIn:D] Stopped
2018-03-10T11:49:48.821Z,1520682588.821 [Default:CheckIn:E] Running Loop=1
2018-03-10T11:49:52.089Z,1520682592.089 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 390.515007 min 
2018-03-10T11:49:52.090Z,1520682592.090 [Default:CheckIn:E] Stopped
2018-03-10T11:49:52.090Z,1520682592.090 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-03-10T11:49:52.090Z,1520682592.090 [Default:CheckIn] Stopped
2018-03-10T11:49:52.090Z,1520682592.090 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-03-10T11:49:52.090Z,1520682592.090 [Default:CheckIn](INFO): Running loop #39
2018-03-10T11:49:52.090Z,1520682592.090 [Default:CheckIn] Running Loop=39
2018-03-10T11:49:52.090Z,1520682592.090 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-03-10T11:49:52.090Z,1520682592.090 [Default:CheckIn:Read_GPS] Running Loop=1
2018-03-10T11:49:52.544Z,1520682592.544 [NAL9602](INFO): Powering up
2018-03-10T11:50:03.752Z,1520682603.752 [NAL9602](INFO): NAL9602 initialized
2018-03-10T11:50:04.548Z,1520682604.548 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-03-10T11:50:04.548Z,1520682604.548 [NAL9602] Data Fault, FailCount= 3
2018-03-10T11:50:04.548Z,1520682604.548 [NAL9602](ERROR): Data Fault
2018-03-10T11:50:04.653Z,1520682604.653 [CBIT](ERROR): Data Fault in component: NAL9602
2018-03-10T11:50:04.936Z,1520682604.936 [NAL9602](INFO): Powering down
2018-03-10T11:50:05.812Z,1520682605.812 [CBIT](INFO): Clearing failed state for component NAL9602
2018-03-10T11:50:05.812Z,1520682605.812 [NAL9602] No Fault, FailCount= 3
2018-03-10T11:50:35.332Z,1520682635.332 [NAL9602](INFO): Powering up NAL9602
2018-03-10T11:50:38.184Z,1520682638.184 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T11:50:38.184Z,1520682638.184 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 54
2018-03-10T11:50:38.184Z,1520682638.184 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-10T11:50:38.197Z,1520682638.197 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-10T11:50:38.602Z,1520682638.602 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-10T11:50:38.602Z,1520682638.602 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 54
2018-03-10T11:50:38.988Z,1520682638.988 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-10T11:50:38.989Z,1520682638.989 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-10T11:50:38.989Z,1520682638.989 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-10T11:50:46.142Z,1520682646.142 [NAL9602](INFO): NAL9602 initialized
2018-03-10T11:53:39.317Z,1520682819.317 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T11:53:39.317Z,1520682819.317 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 55
2018-03-10T11:53:39.317Z,1520682819.317 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-10T11:53:39.350Z,1520682819.350 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-10T11:53:39.759Z,1520682819.759 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-10T11:53:39.759Z,1520682819.759 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 55
2018-03-10T11:53:40.118Z,1520682820.118 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-10T11:53:40.119Z,1520682820.119 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-10T11:53:40.119Z,1520682820.119 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-10T11:54:37.382Z,1520682877.382 [BPC1](ERROR): Failed to receive battery data
2018-03-10T11:54:37.382Z,1520682877.382 [BPC1] Communications Fault, FailCount= 1
2018-03-10T11:54:37.382Z,1520682877.382 [BPC1](ERROR): Communications Fault
2018-03-10T11:54:37.406Z,1520682877.406 [CBIT](ERROR): Communications Fault in component: BPC1
2018-03-10T11:54:38.596Z,1520682878.596 [CBIT](INFO): Clearing failed state for component BPC1
2018-03-10T11:54:38.596Z,1520682878.596 [BPC1] No Fault, FailCount= 1
2018-03-10T11:54:52.706Z,1520682892.706 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-03-10T11:49:52.1Z
2018-03-10T11:54:52.706Z,1520682892.706 [Default:CheckIn:Read_GPS] Stopped
2018-03-10T11:54:52.706Z,1520682892.706 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-03-10T11:54:53.339Z,1520682893.339 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20180310T051512/Courier0156.lzma
2018-03-10T11:54:53.993Z,1520682893.993 [DataOverHttps](INFO): Moved sent file to Logs/20180310T051512/Courier0156.lzma.bak
2018-03-10T11:54:53.993Z,1520682893.993 [DataOverHttps](INFO): SBD MOMSN=8004430
2018-03-10T11:55:05.941Z,1520682905.941 [DataOverHttps](INFO): Sending 244 bytes from file Logs/20180310T051512/Express0157.lzma
2018-03-10T11:55:06.725Z,1520682906.725 [DataOverHttps](INFO): Moved sent file to Logs/20180310T051512/Express0157.lzma.bak
2018-03-10T11:55:06.725Z,1520682906.725 [DataOverHttps](INFO): SBD MOMSN=8004432
2018-03-10T11:55:07.429Z,1520682907.429 [Default:CheckIn:Read_Iridium] Stopped
2018-03-10T11:55:07.429Z,1520682907.429 [Default:CheckIn:C.Wait] Running Loop=1
2018-03-10T11:55:07.429Z,1520682907.429 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-03-10T11:55:11.369Z,1520682911.369 [BPC1](FAULT): Failed to initialize
2018-03-10T11:55:11.369Z,1520682911.369 [BPC1] Communications Fault, FailCount= 2
2018-03-10T11:55:11.369Z,1520682911.369 [BPC1](ERROR): Communications Fault
2018-03-10T11:55:11.391Z,1520682911.391 [CBIT](ERROR): Communications Fault in component: BPC1
2018-03-10T11:55:12.282Z,1520682912.282 [CBIT](INFO): Clearing failed state for component BPC1
2018-03-10T11:55:12.282Z,1520682912.282 [BPC1] No Fault, FailCount= 2
2018-03-10T11:55:33.887Z,1520682933.887 [CBIT](DEBUG): EFC running - data check-sum false
2018-03-10T11:55:43.064Z,1520682943.064 [BPC1](FAULT): Failed to initialize
2018-03-10T11:55:43.064Z,1520682943.064 [BPC1] Communications Fault, FailCount= 3
2018-03-10T11:55:43.064Z,1520682943.064 [BPC1](ERROR): Communications Fault
2018-03-10T11:55:43.087Z,1520682943.087 [CBIT](ERROR): Communications Fault in component: BPC1
2018-03-10T11:55:44.277Z,1520682944.277 [CBIT](INFO): Clearing failed state for component BPC1
2018-03-10T11:55:44.277Z,1520682944.277 [BPC1] No Fault, FailCount= 3
2018-03-10T11:55:48.608Z,1520682948.608 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session.
2018-03-10T11:56:15.058Z,1520682975.058 [BPC1](FAULT): Failed to initialize
2018-03-10T11:56:15.058Z,1520682975.058 [BPC1] Communications Fault, FailCount= 4
2018-03-10T11:56:15.058Z,1520682975.058 [BPC1](ERROR): Communications Fault
2018-03-10T11:56:15.106Z,1520682975.106 [CBIT](ERROR): Communications Fault in component: BPC1
2018-03-10T11:56:16.318Z,1520682976.318 [CBIT](INFO): Clearing failed state for component BPC1
2018-03-10T11:56:16.318Z,1520682976.318 [BPC1] No Fault, FailCount= 4
2018-03-10T11:56:19.024Z,1520682979.024 [NAL9602](INFO): Powering down
2018-03-10T11:56:40.285Z,1520683000.285 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T11:56:40.285Z,1520683000.285 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 56
2018-03-10T11:56:40.285Z,1520683000.285 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-10T11:56:40.322Z,1520683000.322 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-10T11:56:40.690Z,1520683000.690 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-10T11:56:40.690Z,1520683000.690 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 56
2018-03-10T11:56:41.081Z,1520683001.081 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-10T11:56:41.082Z,1520683001.082 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-10T11:56:41.082Z,1520683001.082 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-10T11:59:41.455Z,1520683181.455 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T11:59:41.455Z,1520683181.455 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 57
2018-03-10T11:59:41.455Z,1520683181.455 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-10T11:59:41.468Z,1520683181.468 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-10T11:59:41.870Z,1520683181.870 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-10T11:59:41.870Z,1520683181.870 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 57
2018-03-10T11:59:42.295Z,1520683182.295 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-10T11:59:42.296Z,1520683182.296 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-10T11:59:42.296Z,1520683182.296 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-10T12:00:07.878Z,1520683207.878 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-03-10T12:00:07.878Z,1520683207.878 [Default:CheckIn:C.Wait] Stopped
2018-03-10T12:00:07.878Z,1520683207.878 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-03-10T12:00:07.878Z,1520683207.878 [Default:CheckIn:D] Running Loop=1
2018-03-10T12:00:08.249Z,1520683208.249 [Default:CheckIn:D] Stopped
2018-03-10T12:00:08.249Z,1520683208.249 [Default:CheckIn:E] Running Loop=1
2018-03-10T12:00:12.039Z,1520683212.039 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 400.838802 min 
2018-03-10T12:00:12.039Z,1520683212.039 [Default:CheckIn:E] Stopped
2018-03-10T12:00:12.040Z,1520683212.040 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-03-10T12:00:12.040Z,1520683212.040 [Default:CheckIn] Stopped
2018-03-10T12:00:12.040Z,1520683212.040 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-03-10T12:00:12.040Z,1520683212.040 [Default:CheckIn](INFO): Running loop #40
2018-03-10T12:00:12.040Z,1520683212.040 [Default:CheckIn] Running Loop=40
2018-03-10T12:00:12.040Z,1520683212.040 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-03-10T12:00:12.040Z,1520683212.040 [Default:CheckIn:Read_GPS] Running Loop=1
2018-03-10T12:00:12.500Z,1520683212.500 [NAL9602](INFO): Powering up
2018-03-10T12:00:23.684Z,1520683223.684 [NAL9602](INFO): NAL9602 initialized
2018-03-10T12:02:42.487Z,1520683362.487 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T12:02:42.487Z,1520683362.487 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 58
2018-03-10T12:02:42.487Z,1520683362.487 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-10T12:02:42.517Z,1520683362.517 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-10T12:02:42.911Z,1520683362.911 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-10T12:02:42.911Z,1520683362.911 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 58
2018-03-10T12:02:43.256Z,1520683363.256 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-10T12:02:43.256Z,1520683363.256 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-10T12:02:43.256Z,1520683363.256 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-10T12:04:16.058Z,1520683456.058 [BPC1](ERROR): Failed to receive battery data
2018-03-10T12:04:16.058Z,1520683456.058 [BPC1] Communications Fault, FailCount= 1
2018-03-10T12:04:16.058Z,1520683456.058 [BPC1](ERROR): Communications Fault
2018-03-10T12:04:16.105Z,1520683456.105 [CBIT](ERROR): Communications Fault in component: BPC1
2018-03-10T12:04:17.319Z,1520683457.319 [CBIT](INFO): Clearing failed state for component BPC1
2018-03-10T12:04:17.319Z,1520683457.319 [BPC1] No Fault, FailCount= 1
2018-03-10T12:04:48.057Z,1520683488.057 [BPC1](FAULT): Failed to initialize
2018-03-10T12:04:48.057Z,1520683488.057 [BPC1] Communications Fault, FailCount= 2
2018-03-10T12:04:48.057Z,1520683488.057 [BPC1](ERROR): Communications Fault
2018-03-10T12:04:48.108Z,1520683488.108 [CBIT](ERROR): Communications Fault in component: BPC1
2018-03-10T12:04:49.301Z,1520683489.301 [CBIT](INFO): Clearing failed state for component BPC1
2018-03-10T12:04:49.301Z,1520683489.301 [BPC1] No Fault, FailCount= 2
2018-03-10T12:05:12.429Z,1520683512.429 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-03-10T12:00:12.0Z
2018-03-10T12:05:12.429Z,1520683512.429 [Default:CheckIn:Read_GPS] Stopped
2018-03-10T12:05:12.429Z,1520683512.429 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-03-10T12:05:13.016Z,1520683513.016 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20180310T051512/Courier0160.lzma
2018-03-10T12:05:13.677Z,1520683513.677 [DataOverHttps](INFO): Moved sent file to Logs/20180310T051512/Courier0160.lzma.bak
2018-03-10T12:05:13.677Z,1520683513.677 [DataOverHttps](INFO): SBD MOMSN=8004489
2018-03-10T12:05:19.756Z,1520683519.756 [BPC1](FAULT): Failed to initialize
2018-03-10T12:05:19.756Z,1520683519.756 [BPC1] Communications Fault, FailCount= 3
2018-03-10T12:05:19.756Z,1520683519.756 [BPC1](ERROR): Communications Fault
2018-03-10T12:05:19.812Z,1520683519.812 [CBIT](ERROR): Communications Fault in component: BPC1
2018-03-10T12:05:23.961Z,1520683523.961 [CBIT](INFO): Clearing failed state for component BPC1
2018-03-10T12:05:23.961Z,1520683523.961 [BPC1] No Fault, FailCount= 3
2018-03-10T12:05:24.188Z,1520683524.188 [DataOverHttps](INFO): Sending 231 bytes from file Logs/20180310T051512/Express0161.lzma
2018-03-10T12:05:24.977Z,1520683524.977 [DataOverHttps](INFO): Moved sent file to Logs/20180310T051512/Express0161.lzma.bak
2018-03-10T12:05:24.977Z,1520683524.977 [DataOverHttps](INFO): SBD MOMSN=8004491
2018-03-10T12:05:25.724Z,1520683525.724 [Default:CheckIn:Read_Iridium] Stopped
2018-03-10T12:05:25.724Z,1520683525.724 [Default:CheckIn:C.Wait] Running Loop=1
2018-03-10T12:05:25.724Z,1520683525.724 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-03-10T12:05:29.437Z,1520683529.437 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session.
2018-03-10T12:05:33.989Z,1520683533.989 [CBIT](DEBUG): EFC running - data check-sum false
2018-03-10T12:05:43.591Z,1520683543.591 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T12:05:43.592Z,1520683543.592 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 59
2018-03-10T12:05:43.592Z,1520683543.592 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-10T12:05:43.604Z,1520683543.604 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-10T12:05:43.992Z,1520683543.992 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-10T12:05:43.992Z,1520683543.992 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 59
2018-03-10T12:05:44.369Z,1520683544.369 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-10T12:05:44.370Z,1520683544.370 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-10T12:05:44.370Z,1520683544.370 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-10T12:05:54.360Z,1520683554.360 [BPC1](FAULT): Failed to initialize
2018-03-10T12:05:54.360Z,1520683554.360 [BPC1] Communications Fault, FailCount= 4
2018-03-10T12:05:54.360Z,1520683554.360 [BPC1](ERROR): Communications Fault
2018-03-10T12:05:54.382Z,1520683554.382 [CBIT](ERROR): Communications Fault in component: BPC1
2018-03-10T12:05:55.625Z,1520683555.625 [CBIT](INFO): Clearing failed state for component BPC1
2018-03-10T12:05:55.625Z,1520683555.625 [BPC1] No Fault, FailCount= 4
2018-03-10T12:05:59.933Z,1520683559.933 [NAL9602](INFO): Powering down
2018-03-10T12:08:44.420Z,1520683724.420 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T12:08:44.420Z,1520683724.420 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 60
2018-03-10T12:08:44.420Z,1520683724.420 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-10T12:08:44.446Z,1520683724.446 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-10T12:08:44.803Z,1520683724.803 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-10T12:08:44.803Z,1520683724.803 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 60
2018-03-10T12:08:45.166Z,1520683725.166 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-10T12:08:45.167Z,1520683725.167 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-10T12:08:45.167Z,1520683725.167 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-10T12:10:26.012Z,1520683826.012 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-03-10T12:10:26.012Z,1520683826.012 [Default:CheckIn:C.Wait] Stopped
2018-03-10T12:10:26.012Z,1520683826.012 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-03-10T12:10:26.012Z,1520683826.012 [Default:CheckIn:D] Running Loop=1
2018-03-10T12:10:26.415Z,1520683826.415 [Default:CheckIn:D] Stopped
2018-03-10T12:10:26.415Z,1520683826.415 [Default:CheckIn:E] Running Loop=1
2018-03-10T12:10:26.834Z,1520683826.834 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 411.141569 min 
2018-03-10T12:10:26.839Z,1520683826.839 [Default:CheckIn:E] Stopped
2018-03-10T12:10:26.839Z,1520683826.839 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-03-10T12:10:26.839Z,1520683826.839 [Default:CheckIn] Stopped
2018-03-10T12:10:26.839Z,1520683826.839 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-03-10T12:10:26.840Z,1520683826.840 [Default:CheckIn](INFO): Running loop #41
2018-03-10T12:10:26.840Z,1520683826.840 [Default:CheckIn] Running Loop=41
2018-03-10T12:10:26.840Z,1520683826.840 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-03-10T12:10:26.840Z,1520683826.840 [Default:CheckIn:Read_GPS] Running Loop=1
2018-03-10T12:10:30.134Z,1520683830.134 [NAL9602](INFO): Powering up
2018-03-10T12:10:41.280Z,1520683841.280 [NAL9602](INFO): NAL9602 initialized
2018-03-10T12:10:42.080Z,1520683842.080 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-03-10T12:10:42.080Z,1520683842.080 [NAL9602] Data Fault, FailCount= 4
2018-03-10T12:10:42.080Z,1520683842.080 [NAL9602](ERROR): Data Fault
2018-03-10T12:10:42.144Z,1520683842.144 [CBIT](ERROR): Data Fault in component: NAL9602
2018-03-10T12:10:42.496Z,1520683842.496 [NAL9602](INFO): Powering down
2018-03-10T12:10:43.368Z,1520683843.368 [CBIT](INFO): Clearing failed state for component NAL9602
2018-03-10T12:10:43.368Z,1520683843.368 [NAL9602] No Fault, FailCount= 4
2018-03-10T12:11:12.881Z,1520683872.881 [NAL9602](INFO): Powering up NAL9602
2018-03-10T12:11:23.685Z,1520683883.685 [NAL9602](INFO): NAL9602 initialized
2018-03-10T12:11:45.453Z,1520683905.453 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T12:11:45.454Z,1520683905.454 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 61
2018-03-10T12:11:45.454Z,1520683905.454 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-10T12:11:45.466Z,1520683905.466 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-10T12:11:45.863Z,1520683905.863 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-10T12:11:45.863Z,1520683905.863 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 61
2018-03-10T12:11:46.279Z,1520683906.279 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-10T12:11:46.280Z,1520683906.280 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-10T12:11:46.280Z,1520683906.280 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-10T12:13:51.295Z,1520684031.295 [BPC1](ERROR): Failed to receive battery data
2018-03-10T12:13:51.295Z,1520684031.295 [BPC1] Communications Fault, FailCount= 1
2018-03-10T12:13:51.295Z,1520684031.295 [BPC1](ERROR): Communications Fault
2018-03-10T12:13:51.352Z,1520684031.352 [CBIT](ERROR): Communications Fault in component: BPC1
2018-03-10T12:13:52.504Z,1520684032.504 [CBIT](INFO): Clearing failed state for component BPC1
2018-03-10T12:13:52.504Z,1520684032.504 [BPC1] No Fault, FailCount= 1
2018-03-10T12:14:23.259Z,1520684063.259 [BPC1](FAULT): Failed to initialize
2018-03-10T12:14:23.259Z,1520684063.259 [BPC1] Communications Fault, FailCount= 2
2018-03-10T12:14:23.259Z,1520684063.259 [BPC1](ERROR): Communications Fault
2018-03-10T12:14:23.322Z,1520684063.322 [CBIT](ERROR): Communications Fault in component: BPC1
2018-03-10T12:14:24.517Z,1520684064.517 [CBIT](INFO): Clearing failed state for component BPC1
2018-03-10T12:14:24.517Z,1520684064.517 [BPC1] No Fault, FailCount= 2
2018-03-10T12:14:46.689Z,1520684086.689 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T12:14:46.689Z,1520684086.689 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 62
2018-03-10T12:14:46.689Z,1520684086.689 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-10T12:14:46.701Z,1520684086.701 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-10T12:14:47.099Z,1520684087.099 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-10T12:14:47.099Z,1520684087.099 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 62
2018-03-10T12:14:47.494Z,1520684087.494 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-10T12:14:47.495Z,1520684087.495 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-10T12:14:47.495Z,1520684087.495 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-10T12:14:55.048Z,1520684095.048 [BPC1](FAULT): Failed to initialize
2018-03-10T12:14:55.048Z,1520684095.048 [BPC1] Communications Fault, FailCount= 3
2018-03-10T12:14:55.048Z,1520684095.048 [BPC1](ERROR): Communications Fault
2018-03-10T12:14:55.120Z,1520684095.120 [CBIT](ERROR): Communications Fault in component: BPC1
2018-03-10T12:14:56.294Z,1520684096.294 [CBIT](INFO): Clearing failed state for component BPC1
2018-03-10T12:14:56.294Z,1520684096.294 [BPC1] No Fault, FailCount= 3
2018-03-10T12:15:27.050Z,1520684127.050 [BPC1](FAULT): Failed to initialize
2018-03-10T12:15:27.050Z,1520684127.050 [BPC1] Communications Fault, FailCount= 4
2018-03-10T12:15:27.050Z,1520684127.050 [BPC1](ERROR): Communications Fault
2018-03-10T12:15:27.083Z,1520684127.083 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-03-10T12:10:26.8Z
2018-03-10T12:15:27.083Z,1520684127.083 [Default:CheckIn:Read_GPS] Stopped
2018-03-10T12:15:27.083Z,1520684127.083 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-03-10T12:15:27.100Z,1520684127.100 [CBIT](ERROR): Communications Fault in component: BPC1
2018-03-10T12:15:31.027Z,1520684131.027 [CBIT](INFO): Clearing failed state for component BPC1
2018-03-10T12:15:31.027Z,1520684131.027 [BPC1] No Fault, FailCount= 4
2018-03-10T12:15:31.291Z,1520684131.291 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20180310T051512/Courier0164.lzma
2018-03-10T12:15:32.089Z,1520684132.089 [DataOverHttps](INFO): Moved sent file to Logs/20180310T051512/Courier0164.lzma.bak
2018-03-10T12:15:32.089Z,1520684132.089 [DataOverHttps](INFO): SBD MOMSN=8004551
2018-03-10T12:15:36.495Z,1520684136.495 [CBIT](DEBUG): EFC running - data check-sum false
2018-03-10T12:15:42.164Z,1520684142.164 [DataOverHttps](INFO): Sending 256 bytes from file Logs/20180310T051512/Express0165.lzma
2018-03-10T12:15:42.961Z,1520684142.961 [DataOverHttps](INFO): Moved sent file to Logs/20180310T051512/Express0165.lzma.bak
2018-03-10T12:15:42.961Z,1520684142.961 [DataOverHttps](INFO): SBD MOMSN=8004553
2018-03-10T12:15:43.704Z,1520684143.704 [Default:CheckIn:Read_Iridium] Stopped
2018-03-10T12:15:43.705Z,1520684143.705 [Default:CheckIn:C.Wait] Running Loop=1
2018-03-10T12:15:43.705Z,1520684143.705 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-03-10T12:16:26.416Z,1520684186.416 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session.
2018-03-10T12:16:56.832Z,1520684216.832 [NAL9602](INFO): Powering down
2018-03-10T12:17:49.031Z,1520684269.031 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T12:17:49.031Z,1520684269.031 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 63
2018-03-10T12:17:49.031Z,1520684269.031 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-10T12:17:49.063Z,1520684269.063 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-10T12:17:49.240Z,1520684269.240 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-10T12:17:49.240Z,1520684269.240 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 63
2018-03-10T12:17:49.566Z,1520684269.566 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-10T12:17:49.567Z,1520684269.567 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-10T12:17:49.567Z,1520684269.567 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-10T12:20:44.109Z,1520684444.109 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-03-10T12:20:44.109Z,1520684444.109 [Default:CheckIn:C.Wait] Stopped
2018-03-10T12:20:44.109Z,1520684444.109 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-03-10T12:20:44.109Z,1520684444.109 [Default:CheckIn:D] Running Loop=1
2018-03-10T12:20:44.518Z,1520684444.518 [Default:CheckIn:D] Stopped
2018-03-10T12:20:44.518Z,1520684444.518 [Default:CheckIn:E] Running Loop=1
2018-03-10T12:20:44.912Z,1520684444.912 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 421.443294 min 
2018-03-10T12:20:44.912Z,1520684444.912 [Default:CheckIn:E] Stopped
2018-03-10T12:20:44.913Z,1520684444.913 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-03-10T12:20:44.913Z,1520684444.913 [Default:CheckIn] Stopped
2018-03-10T12:20:44.913Z,1520684444.913 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-03-10T12:20:44.913Z,1520684444.913 [Default:CheckIn](INFO): Running loop #42
2018-03-10T12:20:44.913Z,1520684444.913 [Default:CheckIn] Running Loop=42
2018-03-10T12:20:44.913Z,1520684444.913 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-03-10T12:20:44.913Z,1520684444.913 [Default:CheckIn:Read_GPS] Running Loop=1
2018-03-10T12:20:48.268Z,1520684448.268 [NAL9602](INFO): Powering up
2018-03-10T12:20:49.880Z,1520684449.880 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T12:20:49.880Z,1520684449.880 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 64
2018-03-10T12:20:49.880Z,1520684449.880 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-10T12:20:49.892Z,1520684449.892 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-10T12:20:50.291Z,1520684450.291 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-10T12:20:50.291Z,1520684450.291 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 64
2018-03-10T12:20:50.674Z,1520684450.674 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-10T12:20:50.674Z,1520684450.674 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-10T12:20:50.674Z,1520684450.674 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-10T12:20:59.428Z,1520684459.428 [NAL9602](INFO): NAL9602 initialized
2018-03-10T12:21:31.428Z,1520684491.428 [NAL9602](ERROR): Failed to receive proper response when querying signal strength for MT queue check.
2018-03-10T12:21:31.503Z,1520684491.503 [NAL9602](FAULT): received: 
+CSQ:0

OK35, 0, 0, 0, 0

OK
2018-03-10T12:21:31.503Z,1520684491.503 [NAL9602] Data Fault, FailCount= 5
2018-03-10T12:21:31.503Z,1520684491.503 [NAL9602](ERROR): Data Fault
2018-03-10T12:21:31.592Z,1520684491.592 [CBIT](ERROR): Data Fault in component: NAL9602
2018-03-10T12:21:31.592Z,1520684491.592 [CBIT](CRITICAL): Data Fault in component: NAL9602
2018-03-10T12:21:31.828Z,1520684491.828 [NAL9602](INFO): Powering down
2018-03-10T12:21:31.920Z,1520684491.920 [CBIT](INFO): Critical error at 20180310T122131
2018-03-10T12:23:24.076Z,1520684604.076 [BPC1](ERROR): Failed to receive battery data
2018-03-10T12:23:24.076Z,1520684604.076 [BPC1] Communications Fault, FailCount= 1
2018-03-10T12:23:24.076Z,1520684604.076 [BPC1](ERROR): Communications Fault
2018-03-10T12:23:24.115Z,1520684604.115 [CBIT](ERROR): Communications Fault in component: BPC1
2018-03-10T12:23:25.330Z,1520684605.330 [CBIT](INFO): Clearing failed state for component BPC1
2018-03-10T12:23:25.330Z,1520684605.330 [BPC1] No Fault, FailCount= 1
2018-03-10T12:23:31.729Z,1520684611.729 [CBIT](INFO): Clearing failed state for component NAL9602
2018-03-10T12:23:31.729Z,1520684611.729 [NAL9602] No Fault, FailCount= 5
2018-03-10T12:23:32.052Z,1520684612.052 [NAL9602](INFO): Powering up NAL9602
2018-03-10T12:23:43.252Z,1520684623.252 [NAL9602](INFO): NAL9602 initialized
2018-03-10T12:23:44.052Z,1520684624.052 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-03-10T12:23:44.052Z,1520684624.052 [NAL9602] Data Fault, FailCount= 1
2018-03-10T12:23:44.052Z,1520684624.052 [NAL9602](ERROR): Data Fault
2018-03-10T12:23:44.139Z,1520684624.139 [CBIT](ERROR): Data Fault in component: NAL9602
2018-03-10T12:23:44.452Z,1520684624.452 [NAL9602](INFO): Powering down
2018-03-10T12:23:45.352Z,1520684625.352 [CBIT](INFO): Clearing failed state for component NAL9602
2018-03-10T12:23:45.352Z,1520684625.352 [NAL9602] No Fault, FailCount= 1
2018-03-10T12:23:50.747Z,1520684630.747 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T12:23:50.748Z,1520684630.748 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 65
2018-03-10T12:23:50.748Z,1520684630.748 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-10T12:23:50.760Z,1520684630.760 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-10T12:23:51.087Z,1520684631.087 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-10T12:23:51.087Z,1520684631.087 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 65
2018-03-10T12:23:51.468Z,1520684631.468 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-10T12:23:51.469Z,1520684631.469 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-10T12:23:51.469Z,1520684631.469 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-10T12:23:55.844Z,1520684635.844 [BPC1](FAULT): Failed to initialize
2018-03-10T12:23:55.844Z,1520684635.844 [BPC1] Communications Fault, FailCount= 2
2018-03-10T12:23:55.844Z,1520684635.844 [BPC1](ERROR): Communications Fault
2018-03-10T12:23:55.906Z,1520684635.906 [CBIT](ERROR): Communications Fault in component: BPC1
2018-03-10T12:23:57.083Z,1520684637.083 [CBIT](INFO): Clearing failed state for component BPC1
2018-03-10T12:23:57.083Z,1520684637.083 [BPC1] No Fault, FailCount= 2
2018-03-10T12:24:14.621Z,1520684654.621 [NAL9602](INFO): Powering up NAL9602
2018-03-10T12:24:25.424Z,1520684665.424 [NAL9602](INFO): NAL9602 initialized
2018-03-10T12:24:27.867Z,1520684667.867 [BPC1](FAULT): Failed to initialize
2018-03-10T12:24:27.867Z,1520684667.867 [BPC1] Communications Fault, FailCount= 3
2018-03-10T12:24:27.867Z,1520684667.867 [BPC1](ERROR): Communications Fault
2018-03-10T12:24:27.920Z,1520684667.920 [CBIT](ERROR): Communications Fault in component: BPC1
2018-03-10T12:24:29.070Z,1520684669.070 [CBIT](INFO): Clearing failed state for component BPC1
2018-03-10T12:24:29.070Z,1520684669.070 [BPC1] No Fault, FailCount= 3
2018-03-10T12:24:59.628Z,1520684699.628 [BPC1](FAULT): Failed to initialize
2018-03-10T12:24:59.628Z,1520684699.628 [BPC1] Communications Fault, FailCount= 4
2018-03-10T12:24:59.628Z,1520684699.628 [BPC1](ERROR): Communications Fault
2018-03-10T12:24:59.679Z,1520684699.679 [CBIT](ERROR): Communications Fault in component: BPC1
2018-03-10T12:25:00.842Z,1520684700.842 [CBIT](INFO): Clearing failed state for component BPC1
2018-03-10T12:25:00.842Z,1520684700.842 [BPC1] No Fault, FailCount= 4
2018-03-10T12:25:36.880Z,1520684736.880 [CBIT](DEBUG): EFC running - data check-sum false
2018-03-10T12:25:45.242Z,1520684745.242 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-03-10T12:20:44.9Z
2018-03-10T12:25:45.243Z,1520684745.243 [Default:CheckIn:Read_GPS] Stopped
2018-03-10T12:25:45.243Z,1520684745.243 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-03-10T12:25:49.375Z,1520684749.375 [DataOverHttps](INFO): Sending 69 bytes from file Logs/20180310T051512/Courier0168.lzma
2018-03-10T12:25:50.165Z,1520684750.165 [DataOverHttps](INFO): Moved sent file to Logs/20180310T051512/Courier0168.lzma.bak
2018-03-10T12:25:50.166Z,1520684750.166 [DataOverHttps](INFO): SBD MOMSN=8004616
2018-03-10T12:26:00.381Z,1520684760.381 [DataOverHttps](INFO): Sending 283 bytes from file Logs/20180310T051512/Express0169.lzma
2018-03-10T12:26:01.178Z,1520684761.178 [DataOverHttps](INFO): Moved sent file to Logs/20180310T051512/Express0169.lzma.bak
2018-03-10T12:26:01.178Z,1520684761.178 [DataOverHttps](INFO): SBD MOMSN=8004619
2018-03-10T12:26:01.879Z,1520684761.879 [Default:CheckIn:Read_Iridium] Stopped
2018-03-10T12:26:01.879Z,1520684761.879 [Default:CheckIn:C.Wait] Running Loop=1
2018-03-10T12:26:01.879Z,1520684761.879 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-03-10T12:26:05.661Z,1520684765.661 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session.
2018-03-10T12:26:36.148Z,1520684796.148 [NAL9602](INFO): Powering down
2018-03-10T12:26:51.791Z,1520684811.791 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T12:26:51.791Z,1520684811.791 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 66
2018-03-10T12:26:51.792Z,1520684811.792 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-10T12:26:51.816Z,1520684811.816 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-10T12:26:52.217Z,1520684812.217 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-10T12:26:52.217Z,1520684812.217 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 66
2018-03-10T12:26:52.578Z,1520684812.578 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-10T12:26:52.587Z,1520684812.587 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-10T12:26:52.587Z,1520684812.587 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-10T12:29:18.558Z,1520684958.558 [BPC1](ERROR): Bank B: No match for stick 6 serial number:1717 in the onboard configuration file.
2018-03-10T12:29:18.558Z,1520684958.558 [BPC1](ERROR): Failed to parse Bank B battery data
2018-03-10T12:29:18.558Z,1520684958.558 [BPC1] Data Fault, FailCount= 1
2018-03-10T12:29:18.559Z,1520684958.559 [BPC1](ERROR): Data Fault
2018-03-10T12:29:18.582Z,1520684958.582 [CBIT](ERROR): Data Fault in component: BPC1
2018-03-10T12:29:19.784Z,1520684959.784 [CBIT](INFO): Clearing failed state for component BPC1
2018-03-10T12:29:19.784Z,1520684959.784 [BPC1] No Fault, FailCount= 1
2018-03-10T12:29:52.589Z,1520684992.589 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T12:29:52.589Z,1520684992.589 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 67
2018-03-10T12:29:52.589Z,1520684992.589 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-10T12:29:52.618Z,1520684992.618 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-10T12:29:53.009Z,1520684993.009 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-10T12:29:53.009Z,1520684993.009 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 67
2018-03-10T12:29:53.433Z,1520684993.433 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-10T12:29:53.434Z,1520684993.434 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-10T12:29:53.434Z,1520684993.434 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-10T12:30:40.669Z,1520685040.669 [BPC1](ERROR): Bank B: No match for stick 5 serial number:1717 in the onboard configuration file.
2018-03-10T12:30:40.669Z,1520685040.669 [BPC1](ERROR): Failed to parse Bank B battery data
2018-03-10T12:30:40.669Z,1520685040.669 [BPC1] Data Fault, FailCount= 1
2018-03-10T12:30:40.669Z,1520685040.669 [BPC1](ERROR): Data Fault
2018-03-10T12:30:40.717Z,1520685040.717 [CBIT](ERROR): Data Fault in component: BPC1
2018-03-10T12:30:41.885Z,1520685041.885 [CBIT](INFO): Clearing failed state for component BPC1
2018-03-10T12:30:41.886Z,1520685041.886 [BPC1] No Fault, FailCount= 1
2018-03-10T12:31:02.289Z,1520685062.289 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-03-10T12:31:02.290Z,1520685062.290 [Default:CheckIn:C.Wait] Stopped
2018-03-10T12:31:02.290Z,1520685062.290 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-03-10T12:31:02.290Z,1520685062.290 [Default:CheckIn:D] Running Loop=1
2018-03-10T12:31:02.669Z,1520685062.669 [Default:CheckIn:D] Stopped
2018-03-10T12:31:02.669Z,1520685062.669 [Default:CheckIn:E] Running Loop=1
2018-03-10T12:31:03.106Z,1520685063.106 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 431.745801 min 
2018-03-10T12:31:03.119Z,1520685063.119 [Default:CheckIn:E] Stopped
2018-03-10T12:31:03.119Z,1520685063.119 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-03-10T12:31:03.119Z,1520685063.119 [Default:CheckIn] Stopped
2018-03-10T12:31:03.119Z,1520685063.119 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-03-10T12:31:03.119Z,1520685063.119 [Default:CheckIn](INFO): Running loop #43
2018-03-10T12:31:03.119Z,1520685063.119 [Default:CheckIn] Running Loop=43
2018-03-10T12:31:03.120Z,1520685063.120 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-03-10T12:31:03.120Z,1520685063.120 [Default:CheckIn:Read_GPS] Running Loop=1
2018-03-10T12:31:06.287Z,1520685066.287 [NAL9602](INFO): Powering up
2018-03-10T12:31:17.456Z,1520685077.456 [NAL9602](INFO): NAL9602 initialized
2018-03-10T12:31:49.444Z,1520685109.444 [NAL9602](ERROR): Failed to receive proper response when querying signal strength for MT queue check.
2018-03-10T12:31:49.527Z,1520685109.527 [NAL9602](FAULT): received: 
+CSQ:0

OK35, 0, 0, 0, 0

OK
2018-03-10T12:31:49.527Z,1520685109.527 [NAL9602] Data Fault, FailCount= 2
2018-03-10T12:31:49.527Z,1520685109.527 [NAL9602](ERROR): Data Fault
2018-03-10T12:31:49.600Z,1520685109.600 [CBIT](ERROR): Data Fault in component: NAL9602
2018-03-10T12:31:49.844Z,1520685109.844 [NAL9602](INFO): Powering down
2018-03-10T12:31:50.721Z,1520685110.721 [CBIT](INFO): Clearing failed state for component NAL9602
2018-03-10T12:31:50.721Z,1520685110.721 [NAL9602] No Fault, FailCount= 2
2018-03-10T12:32:19.996Z,1520685139.996 [NAL9602](INFO): Powering up NAL9602
2018-03-10T12:32:31.176Z,1520685151.176 [NAL9602](INFO): NAL9602 initialized
2018-03-10T12:32:53.633Z,1520685173.633 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T12:32:53.633Z,1520685173.633 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 68
2018-03-10T12:32:53.633Z,1520685173.633 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-10T12:32:53.646Z,1520685173.646 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-10T12:32:54.044Z,1520685174.044 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-10T12:32:54.044Z,1520685174.044 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 68
2018-03-10T12:32:54.437Z,1520685174.437 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-10T12:32:54.437Z,1520685174.437 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-10T12:32:54.437Z,1520685174.437 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-10T12:33:10.186Z,1520685190.186 [BPC1](ERROR): Failed to receive battery data
2018-03-10T12:33:10.186Z,1520685190.186 [BPC1] Communications Fault, FailCount= 1
2018-03-10T12:33:10.186Z,1520685190.186 [BPC1](ERROR): Communications Fault
2018-03-10T12:33:10.209Z,1520685190.209 [CBIT](ERROR): Communications Fault in component: BPC1
2018-03-10T12:33:11.441Z,1520685191.441 [CBIT](INFO): Clearing failed state for component BPC1
2018-03-10T12:33:11.441Z,1520685191.441 [BPC1] No Fault, FailCount= 1
2018-03-10T12:33:42.189Z,1520685222.189 [BPC1](FAULT): Failed to initialize
2018-03-10T12:33:42.189Z,1520685222.189 [BPC1] Communications Fault, FailCount= 2
2018-03-10T12:33:42.189Z,1520685222.189 [BPC1](ERROR): Communications Fault
2018-03-10T12:33:42.235Z,1520685222.235 [CBIT](ERROR): Communications Fault in component: BPC1
2018-03-10T12:33:43.455Z,1520685223.455 [CBIT](INFO): Clearing failed state for component BPC1
2018-03-10T12:33:43.455Z,1520685223.455 [BPC1] No Fault, FailCount= 2
2018-03-10T12:34:13.869Z,1520685253.869 [BPC1](FAULT): Failed to initialize
2018-03-10T12:34:13.869Z,1520685253.869 [BPC1] Communications Fault, FailCount= 3
2018-03-10T12:34:13.869Z,1520685253.869 [BPC1](ERROR): Communications Fault
2018-03-10T12:34:13.891Z,1520685253.891 [CBIT](ERROR): Communications Fault in component: BPC1
2018-03-10T12:34:15.084Z,1520685255.084 [CBIT](INFO): Clearing failed state for component BPC1
2018-03-10T12:34:15.084Z,1520685255.084 [BPC1] No Fault, FailCount= 3
2018-03-10T12:34:45.849Z,1520685285.849 [BPC1](FAULT): Failed to initialize
2018-03-10T12:34:45.849Z,1520685285.849 [BPC1] Communications Fault, FailCount= 4
2018-03-10T12:34:45.849Z,1520685285.849 [BPC1](ERROR): Communications Fault
2018-03-10T12:34:45.902Z,1520685285.902 [CBIT](ERROR): Communications Fault in component: BPC1
2018-03-10T12:34:47.134Z,1520685287.134 [CBIT](INFO): Clearing failed state for component BPC1
2018-03-10T12:34:47.135Z,1520685287.135 [BPC1] No Fault, FailCount= 4
2018-03-10T12:35:36.920Z,1520685336.920 [CBIT](DEBUG): EFC running - data check-sum false
2018-03-10T12:35:54.509Z,1520685354.509 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T12:35:54.509Z,1520685354.509 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 69
2018-03-10T12:35:54.509Z,1520685354.509 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-10T12:35:54.549Z,1520685354.549 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-10T12:35:54.910Z,1520685354.910 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-10T12:35:54.910Z,1520685354.910 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 69
2018-03-10T12:35:55.304Z,1520685355.304 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-10T12:35:55.304Z,1520685355.304 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-10T12:35:55.304Z,1520685355.304 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-10T12:36:03.302Z,1520685363.302 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-03-10T12:31:03.1Z
2018-03-10T12:36:03.303Z,1520685363.303 [Default:CheckIn:Read_GPS] Stopped
2018-03-10T12:36:03.303Z,1520685363.303 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-03-10T12:36:08.355Z,1520685368.355 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20180310T051512/Courier0172.lzma
2018-03-10T12:36:09.153Z,1520685369.153 [DataOverHttps](INFO): Moved sent file to Logs/20180310T051512/Courier0172.lzma.bak
2018-03-10T12:36:09.154Z,1520685369.154 [DataOverHttps](INFO): SBD MOMSN=8004681
2018-03-10T12:36:19.100Z,1520685379.100 [DataOverHttps](INFO): Sending 266 bytes from file Logs/20180310T051512/Express0173.lzma
2018-03-10T12:36:19.897Z,1520685379.897 [DataOverHttps](INFO): Moved sent file to Logs/20180310T051512/Express0173.lzma.bak
2018-03-10T12:36:19.898Z,1520685379.898 [DataOverHttps](INFO): SBD MOMSN=8004683
2018-03-10T12:36:20.616Z,1520685380.616 [Default:CheckIn:Read_Iridium] Stopped
2018-03-10T12:36:20.616Z,1520685380.616 [Default:CheckIn:C.Wait] Running Loop=1
2018-03-10T12:36:20.617Z,1520685380.617 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-03-10T12:36:20.700Z,1520685380.700 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session.
2018-03-10T12:36:51.280Z,1520685411.280 [NAL9602](INFO): Powering down
2018-03-10T12:38:55.648Z,1520685535.648 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T12:38:55.648Z,1520685535.648 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 70
2018-03-10T12:38:55.648Z,1520685535.648 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-10T12:38:55.660Z,1520685535.660 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-10T12:38:56.052Z,1520685536.052 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-10T12:38:56.052Z,1520685536.052 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 70
2018-03-10T12:38:56.447Z,1520685536.447 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-10T12:38:56.448Z,1520685536.448 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-10T12:38:56.448Z,1520685536.448 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-10T12:41:21.126Z,1520685681.126 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-03-10T12:41:21.126Z,1520685681.126 [Default:CheckIn:C.Wait] Stopped
2018-03-10T12:41:21.126Z,1520685681.126 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-03-10T12:41:21.126Z,1520685681.126 [Default:CheckIn:D] Running Loop=1
2018-03-10T12:41:21.514Z,1520685681.514 [Default:CheckIn:D] Stopped
2018-03-10T12:41:21.514Z,1520685681.514 [Default:CheckIn:E] Running Loop=1
2018-03-10T12:41:21.916Z,1520685681.916 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 442.059896 min 
2018-03-10T12:41:21.916Z,1520685681.916 [Default:CheckIn:E] Stopped
2018-03-10T12:41:21.916Z,1520685681.916 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-03-10T12:41:21.916Z,1520685681.916 [Default:CheckIn] Stopped
2018-03-10T12:41:21.916Z,1520685681.916 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-03-10T12:41:21.916Z,1520685681.916 [Default:CheckIn](INFO): Running loop #44
2018-03-10T12:41:21.917Z,1520685681.917 [Default:CheckIn] Running Loop=44
2018-03-10T12:41:21.917Z,1520685681.917 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-03-10T12:41:21.917Z,1520685681.917 [Default:CheckIn:Read_GPS] Running Loop=1
2018-03-10T12:41:25.334Z,1520685685.334 [NAL9602](INFO): Powering up
2018-03-10T12:41:36.496Z,1520685696.496 [NAL9602](INFO): NAL9602 initialized
2018-03-10T12:41:37.288Z,1520685697.288 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-03-10T12:41:37.288Z,1520685697.288 [NAL9602] Data Fault, FailCount= 3
2018-03-10T12:41:37.288Z,1520685697.288 [NAL9602](ERROR): Data Fault
2018-03-10T12:41:37.375Z,1520685697.375 [CBIT](ERROR): Data Fault in component: NAL9602
2018-03-10T12:41:37.696Z,1520685697.696 [NAL9602](INFO): Powering down
2018-03-10T12:41:38.544Z,1520685698.544 [CBIT](INFO): Clearing failed state for component NAL9602
2018-03-10T12:41:38.544Z,1520685698.544 [NAL9602] No Fault, FailCount= 3
2018-03-10T12:41:56.544Z,1520685716.544 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T12:41:56.544Z,1520685716.544 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 71
2018-03-10T12:41:56.545Z,1520685716.545 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-10T12:41:56.578Z,1520685716.578 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-10T12:41:56.940Z,1520685716.940 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-10T12:41:56.940Z,1520685716.940 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 71
2018-03-10T12:41:57.326Z,1520685717.326 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-10T12:41:57.326Z,1520685717.326 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-10T12:41:57.327Z,1520685717.327 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-10T12:42:08.084Z,1520685728.084 [NAL9602](INFO): Powering up NAL9602
2018-03-10T12:42:19.284Z,1520685739.284 [NAL9602](INFO): NAL9602 initialized
2018-03-10T12:42:55.389Z,1520685775.389 [BPC1](ERROR): Failed to receive battery data
2018-03-10T12:42:55.389Z,1520685775.389 [BPC1] Communications Fault, FailCount= 1
2018-03-10T12:42:55.389Z,1520685775.389 [BPC1](ERROR): Communications Fault
2018-03-10T12:42:55.441Z,1520685775.441 [CBIT](ERROR): Communications Fault in component: BPC1
2018-03-10T12:42:56.637Z,1520685776.637 [CBIT](INFO): Clearing failed state for component BPC1
2018-03-10T12:42:56.637Z,1520685776.637 [BPC1] No Fault, FailCount= 1
2018-03-10T12:43:27.155Z,1520685807.155 [BPC1](FAULT): Failed to initialize
2018-03-10T12:43:27.155Z,1520685807.155 [BPC1] Communications Fault, FailCount= 2
2018-03-10T12:43:27.155Z,1520685807.155 [BPC1](ERROR): Communications Fault
2018-03-10T12:43:27.217Z,1520685807.217 [CBIT](ERROR): Communications Fault in component: BPC1
2018-03-10T12:43:28.374Z,1520685808.374 [CBIT](INFO): Clearing failed state for component BPC1
2018-03-10T12:43:28.374Z,1520685808.374 [BPC1] No Fault, FailCount= 2
2018-03-10T12:43:59.160Z,1520685839.160 [BPC1](FAULT): Failed to initialize
2018-03-10T12:43:59.161Z,1520685839.161 [BPC1] Communications Fault, FailCount= 3
2018-03-10T12:43:59.161Z,1520685839.161 [BPC1](ERROR): Communications Fault
2018-03-10T12:43:59.204Z,1520685839.204 [CBIT](ERROR): Communications Fault in component: BPC1
2018-03-10T12:44:00.380Z,1520685840.380 [CBIT](INFO): Clearing failed state for component BPC1
2018-03-10T12:44:00.380Z,1520685840.380 [BPC1] No Fault, FailCount= 3
2018-03-10T12:44:31.177Z,1520685871.177 [BPC1](FAULT): Failed to initialize
2018-03-10T12:44:31.177Z,1520685871.177 [BPC1] Communications Fault, FailCount= 4
2018-03-10T12:44:31.177Z,1520685871.177 [BPC1](ERROR): Communications Fault
2018-03-10T12:44:31.199Z,1520685871.199 [CBIT](ERROR): Communications Fault in component: BPC1
2018-03-10T12:44:32.400Z,1520685872.400 [CBIT](INFO): Clearing failed state for component BPC1
2018-03-10T12:44:32.400Z,1520685872.400 [BPC1] No Fault, FailCount= 4
2018-03-10T12:44:57.613Z,1520685897.613 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T12:44:57.614Z,1520685897.614 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 72
2018-03-10T12:44:57.614Z,1520685897.614 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-10T12:44:57.627Z,1520685897.627 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-10T12:44:58.025Z,1520685898.025 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-10T12:44:58.025Z,1520685898.025 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 72
2018-03-10T12:44:58.387Z,1520685898.387 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-10T12:44:58.387Z,1520685898.387 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-10T12:44:58.388Z,1520685898.388 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-10T12:45:03.169Z,1520685903.169 [BPC1](FAULT): Failed to initialize
2018-03-10T12:45:03.169Z,1520685903.169 [BPC1] Communications Fault, FailCount= 5
2018-03-10T12:45:03.169Z,1520685903.169 [BPC1](ERROR): Communications Fault
2018-03-10T12:45:03.191Z,1520685903.191 [CBIT](ERROR): Communications Fault in component: BPC1
2018-03-10T12:45:04.401Z,1520685904.401 [CBIT](INFO): Clearing failed state for component BPC1
2018-03-10T12:45:04.401Z,1520685904.401 [BPC1] No Fault, FailCount= 5
2018-03-10T12:45:37.330Z,1520685937.330 [CBIT](DEBUG): EFC running - data check-sum false
2018-03-10T12:46:22.096Z,1520685982.096 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-03-10T12:41:21.9Z
2018-03-10T12:46:22.096Z,1520685982.096 [Default:CheckIn:Read_GPS] Stopped
2018-03-10T12:46:22.096Z,1520685982.096 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-03-10T12:46:26.285Z,1520685986.285 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20180310T051512/Courier0176.lzma
2018-03-10T12:46:27.081Z,1520685987.081 [DataOverHttps](INFO): Moved sent file to Logs/20180310T051512/Courier0176.lzma.bak
2018-03-10T12:46:27.081Z,1520685987.081 [DataOverHttps](INFO): SBD MOMSN=8004742
2018-03-10T12:46:37.635Z,1520685997.635 [DataOverHttps](INFO): Sending 249 bytes from file Logs/20180310T051512/Express0177.lzma
2018-03-10T12:46:38.433Z,1520685998.433 [DataOverHttps](INFO): Moved sent file to Logs/20180310T051512/Express0177.lzma.bak
2018-03-10T12:46:38.434Z,1520685998.434 [DataOverHttps](INFO): SBD MOMSN=8004744
2018-03-10T12:46:39.176Z,1520685999.176 [Default:CheckIn:Read_Iridium] Stopped
2018-03-10T12:46:39.176Z,1520685999.176 [Default:CheckIn:C.Wait] Running Loop=1
2018-03-10T12:46:39.176Z,1520685999.177 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-03-10T12:47:25.404Z,1520686045.404 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session.
2018-03-10T12:47:55.949Z,1520686075.949 [NAL9602](INFO): Powering down
2018-03-10T12:47:58.773Z,1520686078.773 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T12:47:58.773Z,1520686078.773 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 73
2018-03-10T12:47:58.773Z,1520686078.773 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-10T12:47:58.786Z,1520686078.786 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-10T12:47:59.189Z,1520686079.189 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-10T12:47:59.189Z,1520686079.189 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 73
2018-03-10T12:47:59.556Z,1520686079.556 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-10T12:47:59.556Z,1520686079.556 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-10T12:47:59.557Z,1520686079.557 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-10T12:50:59.585Z,1520686259.585 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T12:50:59.585Z,1520686259.585 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 74
2018-03-10T12:50:59.585Z,1520686259.585 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-10T12:50:59.597Z,1520686259.597 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-10T12:50:59.990Z,1520686259.990 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-10T12:50:59.990Z,1520686259.990 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 74
2018-03-10T12:51:00.361Z,1520686260.361 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-10T12:51:00.362Z,1520686260.362 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-10T12:51:00.362Z,1520686260.362 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-10T12:51:39.596Z,1520686299.596 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-03-10T12:51:39.597Z,1520686299.597 [Default:CheckIn:C.Wait] Stopped
2018-03-10T12:51:39.597Z,1520686299.597 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-03-10T12:51:39.597Z,1520686299.597 [Default:CheckIn:D] Running Loop=1
2018-03-10T12:51:39.965Z,1520686299.965 [Default:CheckIn:D] Stopped
2018-03-10T12:51:39.965Z,1520686299.965 [Default:CheckIn:E] Running Loop=1
2018-03-10T12:51:40.382Z,1520686300.382 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 452.367415 min 
2018-03-10T12:51:40.382Z,1520686300.382 [Default:CheckIn:E] Stopped
2018-03-10T12:51:40.382Z,1520686300.382 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-03-10T12:51:40.382Z,1520686300.382 [Default:CheckIn] Stopped
2018-03-10T12:51:40.382Z,1520686300.382 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-03-10T12:51:40.383Z,1520686300.383 [Default:CheckIn](INFO): Running loop #45
2018-03-10T12:51:40.383Z,1520686300.383 [Default:CheckIn] Running Loop=45
2018-03-10T12:51:40.383Z,1520686300.383 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-03-10T12:51:40.383Z,1520686300.383 [Default:CheckIn:Read_GPS] Running Loop=1
2018-03-10T12:51:43.577Z,1520686303.577 [NAL9602](INFO): Powering up
2018-03-10T12:51:54.752Z,1520686314.752 [NAL9602](INFO): NAL9602 initialized
2018-03-10T12:52:26.752Z,1520686346.752 [NAL9602](ERROR): Failed to receive proper response when querying signal strength for MT queue check.
2018-03-10T12:52:26.835Z,1520686346.835 [NAL9602](FAULT): received: 
+CSQ:0

OK35, 0, 0, 0, 0

OK
2018-03-10T12:52:26.835Z,1520686346.835 [NAL9602] Data Fault, FailCount= 4
2018-03-10T12:52:26.835Z,1520686346.835 [NAL9602](ERROR): Data Fault
2018-03-10T12:52:26.924Z,1520686346.924 [CBIT](ERROR): Data Fault in component: NAL9602
2018-03-10T12:52:27.152Z,1520686347.152 [NAL9602](INFO): Powering down
2018-03-10T12:52:28.011Z,1520686348.011 [CBIT](INFO): Clearing failed state for component NAL9602
2018-03-10T12:52:28.011Z,1520686348.011 [NAL9602] No Fault, FailCount= 4
2018-03-10T12:52:34.004Z,1520686354.004 [BPC1](ERROR): Failed to receive battery data
2018-03-10T12:52:34.005Z,1520686354.005 [BPC1] Communications Fault, FailCount= 1
2018-03-10T12:52:34.005Z,1520686354.005 [BPC1](ERROR): Communications Fault
2018-03-10T12:52:34.073Z,1520686354.073 [CBIT](ERROR): Communications Fault in component: BPC1
2018-03-10T12:52:35.231Z,1520686355.231 [CBIT](INFO): Clearing failed state for component BPC1
2018-03-10T12:52:35.231Z,1520686355.231 [BPC1] No Fault, FailCount= 1
2018-03-10T12:52:57.312Z,1520686377.312 [NAL9602](INFO): Powering up NAL9602
2018-03-10T12:53:05.745Z,1520686385.745 [BPC1](FAULT): Failed to initialize
2018-03-10T12:53:05.745Z,1520686385.745 [BPC1] Communications Fault, FailCount= 2
2018-03-10T12:53:05.745Z,1520686385.745 [BPC1](ERROR): Communications Fault
2018-03-10T12:53:05.774Z,1520686385.774 [CBIT](ERROR): Communications Fault in component: BPC1
2018-03-10T12:53:06.978Z,1520686386.978 [CBIT](INFO): Clearing failed state for component BPC1
2018-03-10T12:53:06.978Z,1520686386.978 [BPC1] No Fault, FailCount= 2
2018-03-10T12:53:08.512Z,1520686388.512 [NAL9602](INFO): NAL9602 initialized
2018-03-10T12:53:09.312Z,1520686389.312 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-03-10T12:53:09.312Z,1520686389.312 [NAL9602] Data Fault, FailCount= 5
2018-03-10T12:53:09.312Z,1520686389.312 [NAL9602](ERROR): Data Fault
2018-03-10T12:53:09.400Z,1520686389.400 [CBIT](ERROR): Data Fault in component: NAL9602
2018-03-10T12:53:09.401Z,1520686389.401 [CBIT](CRITICAL): Data Fault in component: NAL9602
2018-03-10T12:53:09.720Z,1520686389.720 [NAL9602](INFO): Powering down
2018-03-10T12:53:09.802Z,1520686389.802 [CBIT](INFO): Critical error at 20180310T125309
2018-03-10T12:53:37.751Z,1520686417.751 [BPC1](FAULT): Failed to initialize
2018-03-10T12:53:37.751Z,1520686417.751 [BPC1] Communications Fault, FailCount= 3
2018-03-10T12:53:37.751Z,1520686417.751 [BPC1](ERROR): Communications Fault
2018-03-10T12:53:37.774Z,1520686417.774 [CBIT](ERROR): Communications Fault in component: BPC1
2018-03-10T12:53:38.984Z,1520686418.984 [CBIT](INFO): Clearing failed state for component BPC1
2018-03-10T12:53:38.984Z,1520686418.984 [BPC1] No Fault, FailCount= 3
2018-03-10T12:54:00.579Z,1520686440.579 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T12:54:00.579Z,1520686440.579 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 75
2018-03-10T12:54:00.579Z,1520686440.579 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-10T12:54:00.591Z,1520686440.591 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-10T12:54:01.039Z,1520686441.039 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-10T12:54:01.039Z,1520686441.039 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 75
2018-03-10T12:54:01.380Z,1520686441.380 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-10T12:54:01.381Z,1520686441.381 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-10T12:54:01.381Z,1520686441.381 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-10T12:54:09.774Z,1520686449.774 [BPC1](FAULT): Failed to initialize
2018-03-10T12:54:09.774Z,1520686449.774 [BPC1] Communications Fault, FailCount= 4
2018-03-10T12:54:09.774Z,1520686449.774 [BPC1](ERROR): Communications Fault
2018-03-10T12:54:09.830Z,1520686449.830 [CBIT](ERROR): Communications Fault in component: BPC1
2018-03-10T12:54:10.995Z,1520686450.995 [CBIT](INFO): Clearing failed state for component BPC1
2018-03-10T12:54:10.995Z,1520686450.995 [BPC1] No Fault, FailCount= 4
2018-03-10T12:54:43.775Z,1520686483.775 [BPC1](FAULT): Failed to initialize
2018-03-10T12:54:43.775Z,1520686483.775 [BPC1] Communications Fault, FailCount= 5
2018-03-10T12:54:43.775Z,1520686483.775 [BPC1](ERROR): Communications Fault
2018-03-10T12:54:43.850Z,1520686483.850 [CBIT](ERROR): Communications Fault in component: BPC1
2018-03-10T12:54:44.770Z,1520686484.770 [CBIT](INFO): Clearing failed state for component BPC1
2018-03-10T12:54:44.770Z,1520686484.770 [BPC1] No Fault, FailCount= 5
2018-03-10T12:55:09.571Z,1520686509.571 [CBIT](INFO): Clearing failed state for component NAL9602
2018-03-10T12:55:09.572Z,1520686509.572 [NAL9602] No Fault, FailCount= 5
2018-03-10T12:55:09.869Z,1520686509.869 [NAL9602](INFO): Powering up NAL9602
2018-03-10T12:55:21.076Z,1520686521.076 [NAL9602](INFO): NAL9602 initialized
2018-03-10T12:55:37.575Z,1520686537.575 [CBIT](DEBUG): EFC running - data check-sum false
2018-03-10T12:56:40.583Z,1520686600.583 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-03-10T12:51:40.4Z
2018-03-10T12:56:40.584Z,1520686600.584 [Default:CheckIn:Read_GPS] Stopped
2018-03-10T12:56:40.584Z,1520686600.584 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-03-10T12:56:44.755Z,1520686604.755 [DataOverHttps](INFO): Sending 70 bytes from file Logs/20180310T051512/Courier0180.lzma
2018-03-10T12:56:45.553Z,1520686605.553 [DataOverHttps](INFO): Moved sent file to Logs/20180310T051512/Courier0180.lzma.bak
2018-03-10T12:56:45.553Z,1520686605.553 [DataOverHttps](INFO): SBD MOMSN=8004808
2018-03-10T12:56:55.811Z,1520686615.811 [DataOverHttps](INFO): Sending 289 bytes from file Logs/20180310T051512/Express0181.lzma
2018-03-10T12:56:56.613Z,1520686616.613 [DataOverHttps](INFO): Moved sent file to Logs/20180310T051512/Express0181.lzma.bak
2018-03-10T12:56:56.613Z,1520686616.613 [DataOverHttps](INFO): SBD MOMSN=8004811
2018-03-10T12:56:57.370Z,1520686617.370 [Default:CheckIn:Read_Iridium] Stopped
2018-03-10T12:56:57.371Z,1520686617.371 [Default:CheckIn:C.Wait] Running Loop=1
2018-03-10T12:56:57.371Z,1520686617.371 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-03-10T12:57:01.103Z,1520686621.103 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session.
2018-03-10T12:57:01.688Z,1520686621.688 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T12:57:01.689Z,1520686621.689 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 76
2018-03-10T12:57:01.689Z,1520686621.689 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-10T12:57:01.701Z,1520686621.701 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-10T12:57:02.103Z,1520686622.103 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-10T12:57:02.103Z,1520686622.103 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 76
2018-03-10T12:57:02.468Z,1520686622.468 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-10T12:57:02.468Z,1520686622.468 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-10T12:57:02.468Z,1520686622.468 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-10T12:57:31.633Z,1520686651.633 [NAL9602](INFO): Powering down
2018-03-10T13:00:02.484Z,1520686802.484 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T13:00:02.484Z,1520686802.484 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 77
2018-03-10T13:00:02.484Z,1520686802.484 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-10T13:00:02.496Z,1520686802.496 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-10T13:00:02.895Z,1520686802.895 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-10T13:00:02.895Z,1520686802.895 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 77
2018-03-10T13:00:03.283Z,1520686803.283 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-10T13:00:03.283Z,1520686803.283 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-10T13:00:03.284Z,1520686803.284 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-10T13:01:57.815Z,1520686917.815 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-03-10T13:01:57.816Z,1520686917.816 [Default:CheckIn:C.Wait] Stopped
2018-03-10T13:01:57.816Z,1520686917.816 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-03-10T13:01:57.816Z,1520686917.816 [Default:CheckIn:D] Running Loop=1
2018-03-10T13:01:58.218Z,1520686918.218 [Default:CheckIn:D] Stopped
2018-03-10T13:01:58.218Z,1520686918.218 [Default:CheckIn:E] Running Loop=1
2018-03-10T13:01:58.624Z,1520686918.624 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 462.671615 min 
2018-03-10T13:01:58.624Z,1520686918.624 [Default:CheckIn:E] Stopped
2018-03-10T13:01:58.624Z,1520686918.624 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-03-10T13:01:58.624Z,1520686918.624 [Default:CheckIn] Stopped
2018-03-10T13:01:58.624Z,1520686918.624 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-03-10T13:01:58.624Z,1520686918.624 [Default:CheckIn](INFO): Running loop #46
2018-03-10T13:01:58.624Z,1520686918.624 [Default:CheckIn] Running Loop=46
2018-03-10T13:01:58.624Z,1520686918.624 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-03-10T13:01:58.625Z,1520686918.625 [Default:CheckIn:Read_GPS] Running Loop=1
2018-03-10T13:02:01.944Z,1520686921.944 [NAL9602](INFO): Powering up
2018-03-10T13:02:09.541Z,1520686929.541 [BPC1](ERROR): Failed to receive battery data
2018-03-10T13:02:09.541Z,1520686929.541 [BPC1] Communications Fault, FailCount= 1
2018-03-10T13:02:09.541Z,1520686929.541 [BPC1](ERROR): Communications Fault
2018-03-10T13:02:09.564Z,1520686929.564 [CBIT](ERROR): Communications Fault in component: BPC1
2018-03-10T13:02:10.764Z,1520686930.764 [CBIT](INFO): Clearing failed state for component BPC1
2018-03-10T13:02:10.764Z,1520686930.764 [BPC1] No Fault, FailCount= 1
2018-03-10T13:02:13.101Z,1520686933.101 [NAL9602](INFO): NAL9602 initialized
2018-03-10T13:02:41.564Z,1520686961.564 [BPC1](FAULT): Failed to initialize
2018-03-10T13:02:41.564Z,1520686961.564 [BPC1] Communications Fault, FailCount= 2
2018-03-10T13:02:41.564Z,1520686961.564 [BPC1](ERROR): Communications Fault
2018-03-10T13:02:41.635Z,1520686961.635 [CBIT](ERROR): Communications Fault in component: BPC1
2018-03-10T13:02:42.775Z,1520686962.775 [CBIT](INFO): Clearing failed state for component BPC1
2018-03-10T13:02:42.775Z,1520686962.775 [BPC1] No Fault, FailCount= 2
2018-03-10T13:02:45.100Z,1520686965.100 [NAL9602](ERROR): Failed to receive proper response when querying signal strength for MT queue check.
2018-03-10T13:02:45.183Z,1520686965.183 [NAL9602](FAULT): received: 
+CSQ:0

OK35, 0, 0, 0, 0

OK
2018-03-10T13:02:45.183Z,1520686965.183 [NAL9602] Data Fault, FailCount= 1
2018-03-10T13:02:45.183Z,1520686965.183 [NAL9602](ERROR): Data Fault
2018-03-10T13:02:45.258Z,1520686965.258 [CBIT](ERROR): Data Fault in component: NAL9602
2018-03-10T13:02:45.496Z,1520686965.496 [NAL9602](INFO): Powering down
2018-03-10T13:02:46.360Z,1520686966.360 [CBIT](INFO): Clearing failed state for component NAL9602
2018-03-10T13:02:46.360Z,1520686966.360 [NAL9602] No Fault, FailCount= 1
2018-03-10T13:03:03.628Z,1520686983.628 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T13:03:03.628Z,1520686983.628 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 78
2018-03-10T13:03:03.628Z,1520686983.628 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-10T13:03:03.653Z,1520686983.653 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-10T13:03:04.004Z,1520686984.004 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-10T13:03:04.004Z,1520686984.004 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 78
2018-03-10T13:03:04.396Z,1520686984.396 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-10T13:03:04.397Z,1520686984.397 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-10T13:03:04.397Z,1520686984.397 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-10T13:03:13.583Z,1520686993.583 [BPC1](FAULT): Failed to initialize
2018-03-10T13:03:13.583Z,1520686993.583 [BPC1] Communications Fault, FailCount= 3
2018-03-10T13:03:13.583Z,1520686993.583 [BPC1](ERROR): Communications Fault
2018-03-10T13:03:13.605Z,1520686993.605 [CBIT](ERROR): Communications Fault in component: BPC1
2018-03-10T13:03:14.827Z,1520686994.827 [CBIT](INFO): Clearing failed state for component BPC1
2018-03-10T13:03:14.827Z,1520686994.827 [BPC1] No Fault, FailCount= 3
2018-03-10T13:03:15.560Z,1520686995.560 [NAL9602](INFO): Powering up NAL9602
2018-03-10T13:03:26.752Z,1520687006.752 [NAL9602](INFO): NAL9602 initialized
2018-03-10T13:03:45.592Z,1520687025.592 [BPC1](FAULT): Failed to initialize
2018-03-10T13:03:45.592Z,1520687025.592 [BPC1] Communications Fault, FailCount= 4
2018-03-10T13:03:45.592Z,1520687025.592 [BPC1](ERROR): Communications Fault
2018-03-10T13:03:45.681Z,1520687025.681 [CBIT](ERROR): Communications Fault in component: BPC1
2018-03-10T13:03:46.857Z,1520687026.857 [CBIT](INFO): Clearing failed state for component BPC1
2018-03-10T13:03:46.857Z,1520687026.857 [BPC1] No Fault, FailCount= 4
2018-03-10T13:05:37.898Z,1520687137.898 [CBIT](DEBUG): EFC running - data check-sum false
2018-03-10T13:06:04.461Z,1520687164.461 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T13:06:04.462Z,1520687164.462 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 79
2018-03-10T13:06:04.462Z,1520687164.462 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-10T13:06:04.474Z,1520687164.474 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-10T13:06:04.876Z,1520687164.876 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-10T13:06:04.876Z,1520687164.876 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 79
2018-03-10T13:06:05.262Z,1520687165.261 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-10T13:06:05.262Z,1520687165.262 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-10T13:06:05.262Z,1520687165.262 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-10T13:06:14.855Z,1520687174.855 [BPC1](ERROR): Bank B: No match for stick 6 serial number:1717 in the onboard configuration file.
2018-03-10T13:06:14.856Z,1520687174.856 [BPC1](ERROR): Failed to parse Bank B battery data
2018-03-10T13:06:14.856Z,1520687174.856 [BPC1] Data Fault, FailCount= 1
2018-03-10T13:06:14.856Z,1520687174.856 [BPC1](ERROR): Data Fault
2018-03-10T13:06:14.911Z,1520687174.911 [CBIT](ERROR): Data Fault in component: BPC1
2018-03-10T13:06:16.079Z,1520687176.079 [CBIT](INFO): Clearing failed state for component BPC1
2018-03-10T13:06:16.079Z,1520687176.079 [BPC1] No Fault, FailCount= 1
2018-03-10T13:06:58.888Z,1520687218.888 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-03-10T13:01:58.6Z
2018-03-10T13:06:58.888Z,1520687218.888 [Default:CheckIn:Read_GPS] Stopped
2018-03-10T13:06:58.888Z,1520687218.888 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-03-10T13:07:02.791Z,1520687222.791 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20180310T051512/Courier0184.lzma
2018-03-10T13:07:03.497Z,1520687223.497 [DataOverHttps](INFO): Moved sent file to Logs/20180310T051512/Courier0184.lzma.bak
2018-03-10T13:07:03.498Z,1520687223.498 [DataOverHttps](INFO): SBD MOMSN=8004866
2018-03-10T13:07:13.856Z,1520687233.856 [DataOverHttps](INFO): Sending 268 bytes from file Logs/20180310T051512/Express0185.lzma
2018-03-10T13:07:15.307Z,1520687235.307 [DataOverHttps](INFO): Moved sent file to Logs/20180310T051512/Express0185.lzma.bak
2018-03-10T13:07:15.307Z,1520687235.307 [DataOverHttps](INFO): SBD MOMSN=8004868
2018-03-10T13:07:15.814Z,1520687235.814 [Default:CheckIn:Read_Iridium] Stopped
2018-03-10T13:07:15.814Z,1520687235.814 [Default:CheckIn:C.Wait] Running Loop=1
2018-03-10T13:07:15.814Z,1520687235.814 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-03-10T13:07:19.412Z,1520687239.412 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session.
2018-03-10T13:07:49.918Z,1520687269.918 [NAL9602](INFO): Powering down
2018-03-10T13:09:05.288Z,1520687345.288 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T13:09:05.288Z,1520687345.288 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 80
2018-03-10T13:09:05.289Z,1520687345.289 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-10T13:09:05.301Z,1520687345.301 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-10T13:09:05.715Z,1520687345.715 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-10T13:09:05.715Z,1520687345.715 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 80
2018-03-10T13:09:06.094Z,1520687346.094 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-10T13:09:06.094Z,1520687346.094 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-10T13:09:06.094Z,1520687346.094 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-10T13:11:46.432Z,1520687506.432 [BPC1](ERROR): Failed to receive battery data
2018-03-10T13:11:46.432Z,1520687506.432 [BPC1] Communications Fault, FailCount= 1
2018-03-10T13:11:46.432Z,1520687506.432 [BPC1](ERROR): Communications Fault
2018-03-10T13:11:46.500Z,1520687506.500 [CBIT](ERROR): Communications Fault in component: BPC1
2018-03-10T13:11:47.667Z,1520687507.667 [CBIT](INFO): Clearing failed state for component BPC1
2018-03-10T13:11:47.667Z,1520687507.667 [BPC1] No Fault, FailCount= 1
2018-03-10T13:12:06.438Z,1520687526.438 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T13:12:06.438Z,1520687526.438 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 81
2018-03-10T13:12:06.438Z,1520687526.438 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-10T13:12:06.450Z,1520687526.450 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-10T13:12:06.852Z,1520687526.852 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-10T13:12:06.852Z,1520687526.852 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 81
2018-03-10T13:12:07.254Z,1520687527.254 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-10T13:12:07.254Z,1520687527.254 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-10T13:12:07.255Z,1520687527.255 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-10T13:12:16.054Z,1520687536.054 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-03-10T13:12:16.054Z,1520687536.054 [Default:CheckIn:C.Wait] Stopped
2018-03-10T13:12:16.054Z,1520687536.054 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-03-10T13:12:16.054Z,1520687536.054 [Default:CheckIn:D] Running Loop=1
2018-03-10T13:12:16.458Z,1520687536.458 [Default:CheckIn:D] Stopped
2018-03-10T13:12:16.458Z,1520687536.458 [Default:CheckIn:E] Running Loop=1
2018-03-10T13:12:16.859Z,1520687536.859 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 472.975618 min 
2018-03-10T13:12:16.859Z,1520687536.859 [Default:CheckIn:E] Stopped
2018-03-10T13:12:16.859Z,1520687536.859 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-03-10T13:12:16.859Z,1520687536.859 [Default:CheckIn] Stopped
2018-03-10T13:12:16.859Z,1520687536.859 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-03-10T13:12:16.859Z,1520687536.859 [Default:CheckIn](INFO): Running loop #47
2018-03-10T13:12:16.859Z,1520687536.859 [Default:CheckIn] Running Loop=47
2018-03-10T13:12:16.860Z,1520687536.860 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-03-10T13:12:16.860Z,1520687536.860 [Default:CheckIn:Read_GPS] Running Loop=1
2018-03-10T13:12:17.596Z,1520687537.596 [NAL9602](INFO): Powering up
2018-03-10T13:12:18.429Z,1520687538.429 [BPC1](FAULT): Failed to initialize
2018-03-10T13:12:18.429Z,1520687538.429 [BPC1] Communications Fault, FailCount= 2
2018-03-10T13:12:18.429Z,1520687538.429 [BPC1](ERROR): Communications Fault
2018-03-10T13:12:18.485Z,1520687538.485 [CBIT](ERROR): Communications Fault in component: BPC1
2018-03-10T13:12:22.075Z,1520687542.075 [CBIT](INFO): Clearing failed state for component BPC1
2018-03-10T13:12:22.075Z,1520687542.075 [BPC1] No Fault, FailCount= 2
2018-03-10T13:12:28.796Z,1520687548.796 [NAL9602](INFO): NAL9602 initialized
2018-03-10T13:12:29.596Z,1520687549.596 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-03-10T13:12:29.596Z,1520687549.596 [NAL9602] Data Fault, FailCount= 2
2018-03-10T13:12:29.596Z,1520687549.596 [NAL9602](ERROR): Data Fault
2018-03-10T13:12:29.701Z,1520687549.701 [CBIT](ERROR): Data Fault in component: NAL9602
2018-03-10T13:12:29.992Z,1520687549.992 [NAL9602](INFO): Powering down
2018-03-10T13:12:30.857Z,1520687550.857 [CBIT](INFO): Clearing failed state for component NAL9602
2018-03-10T13:12:30.857Z,1520687550.857 [NAL9602] No Fault, FailCount= 2
2018-03-10T13:12:52.829Z,1520687572.829 [BPC1](FAULT): Failed to initialize
2018-03-10T13:12:52.830Z,1520687572.830 [BPC1] Communications Fault, FailCount= 3
2018-03-10T13:12:52.830Z,1520687572.830 [BPC1](ERROR): Communications Fault
2018-03-10T13:12:52.852Z,1520687572.852 [CBIT](ERROR): Communications Fault in component: BPC1
2018-03-10T13:12:54.052Z,1520687574.052 [CBIT](INFO): Clearing failed state for component BPC1
2018-03-10T13:12:54.052Z,1520687574.052 [BPC1] No Fault, FailCount= 3
2018-03-10T13:13:00.396Z,1520687580.396 [NAL9602](INFO): Powering up NAL9602
2018-03-10T13:13:11.600Z,1520687591.600 [NAL9602](INFO): NAL9602 initialized
2018-03-10T13:13:24.541Z,1520687604.541 [BPC1](FAULT): Failed to initialize
2018-03-10T13:13:24.541Z,1520687604.541 [BPC1] Communications Fault, FailCount= 4
2018-03-10T13:13:24.541Z,1520687604.541 [BPC1](ERROR): Communications Fault
2018-03-10T13:13:24.605Z,1520687604.605 [CBIT](ERROR): Communications Fault in component: BPC1
2018-03-10T13:13:25.779Z,1520687605.779 [CBIT](INFO): Clearing failed state for component BPC1
2018-03-10T13:13:25.779Z,1520687605.779 [BPC1] No Fault, FailCount= 4
2018-03-10T13:15:07.511Z,1520687707.511 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T13:15:07.511Z,1520687707.511 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 82
2018-03-10T13:15:07.512Z,1520687707.512 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-10T13:15:07.545Z,1520687707.545 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-10T13:15:07.961Z,1520687707.961 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-10T13:15:07.961Z,1520687707.961 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 82
2018-03-10T13:15:08.341Z,1520687708.341 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-10T13:15:08.342Z,1520687708.342 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-10T13:15:08.342Z,1520687708.342 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-10T13:15:38.017Z,1520687738.017 [CBIT](DEBUG): EFC running - data check-sum false
2018-03-10T13:17:17.028Z,1520687837.028 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-03-10T13:12:16.9Z
2018-03-10T13:17:17.028Z,1520687837.028 [Default:CheckIn:Read_GPS] Stopped
2018-03-10T13:17:17.028Z,1520687837.028 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-03-10T13:17:21.259Z,1520687841.259 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20180310T051512/Courier0188.lzma
2018-03-10T13:17:22.064Z,1520687842.064 [DataOverHttps](INFO): Moved sent file to Logs/20180310T051512/Courier0188.lzma.bak
2018-03-10T13:17:22.065Z,1520687842.065 [DataOverHttps](INFO): SBD MOMSN=8004922
2018-03-10T13:17:32.438Z,1520687852.438 [DataOverHttps](INFO): Sending 246 bytes from file Logs/20180310T051512/Express0189.lzma
2018-03-10T13:17:33.226Z,1520687853.226 [DataOverHttps](INFO): Moved sent file to Logs/20180310T051512/Express0189.lzma.bak
2018-03-10T13:17:33.226Z,1520687853.226 [DataOverHttps](INFO): SBD MOMSN=8004924
2018-03-10T13:17:33.958Z,1520687853.958 [Default:CheckIn:Read_Iridium] Stopped
2018-03-10T13:17:33.958Z,1520687853.958 [Default:CheckIn:C.Wait] Running Loop=1
2018-03-10T13:17:33.958Z,1520687853.958 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-03-10T13:17:51.836Z,1520687871.836 [BPC1](ERROR): Bank A: No match for stick 2 serial number:1717 in the onboard configuration file.
2018-03-10T13:17:51.836Z,1520687871.836 [BPC1](ERROR): Failed to parse Bank A battery data
2018-03-10T13:17:51.836Z,1520687871.836 [BPC1] Data Fault, FailCount= 1
2018-03-10T13:17:51.836Z,1520687871.836 [BPC1](ERROR): Data Fault
2018-03-10T13:17:51.896Z,1520687871.896 [CBIT](ERROR): Data Fault in component: BPC1
2018-03-10T13:17:53.100Z,1520687873.100 [CBIT](INFO): Clearing failed state for component BPC1
2018-03-10T13:17:53.100Z,1520687873.100 [BPC1] No Fault, FailCount= 1
2018-03-10T13:18:08.658Z,1520687888.658 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T13:18:08.658Z,1520687888.658 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 83
2018-03-10T13:18:08.658Z,1520687888.658 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-10T13:18:08.678Z,1520687888.678 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-10T13:18:09.067Z,1520687889.067 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-10T13:18:09.067Z,1520687889.067 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 83
2018-03-10T13:18:09.450Z,1520687889.450 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-10T13:18:09.451Z,1520687889.451 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-10T13:18:09.451Z,1520687889.451 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-10T13:18:14.992Z,1520687894.992 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session.
2018-03-10T13:18:45.404Z,1520687925.404 [NAL9602](INFO): Powering down
2018-03-10T13:21:09.674Z,1520688069.674 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T13:21:09.679Z,1520688069.679 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 84
2018-03-10T13:21:09.679Z,1520688069.679 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-10T13:21:09.703Z,1520688069.703 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-10T13:21:10.087Z,1520688070.087 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-10T13:21:10.087Z,1520688070.087 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 84
2018-03-10T13:21:10.464Z,1520688070.464 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-10T13:21:10.465Z,1520688070.465 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-10T13:21:10.465Z,1520688070.465 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-10T13:21:26.062Z,1520688086.062 [BPC1](ERROR): Failed to receive battery data
2018-03-10T13:21:26.062Z,1520688086.062 [BPC1] Communications Fault, FailCount= 1
2018-03-10T13:21:26.062Z,1520688086.062 [BPC1](ERROR): Communications Fault
2018-03-10T13:21:26.085Z,1520688086.085 [CBIT](ERROR): Communications Fault in component: BPC1
2018-03-10T13:21:27.280Z,1520688087.280 [CBIT](INFO): Clearing failed state for component BPC1
2018-03-10T13:21:27.280Z,1520688087.280 [BPC1] No Fault, FailCount= 1
2018-03-10T13:21:58.104Z,1520688118.104 [BPC1](FAULT): Failed to initialize
2018-03-10T13:21:58.104Z,1520688118.104 [BPC1] Communications Fault, FailCount= 2
2018-03-10T13:21:58.104Z,1520688118.104 [BPC1](ERROR): Communications Fault
2018-03-10T13:21:58.159Z,1520688118.159 [CBIT](ERROR): Communications Fault in component: BPC1
2018-03-10T13:21:59.327Z,1520688119.327 [CBIT](INFO): Clearing failed state for component BPC1
2018-03-10T13:21:59.327Z,1520688119.327 [BPC1] No Fault, FailCount= 2
2018-03-10T13:22:30.119Z,1520688150.119 [BPC1](FAULT): Failed to initialize
2018-03-10T13:22:30.119Z,1520688150.119 [BPC1] Communications Fault, FailCount= 3
2018-03-10T13:22:30.119Z,1520688150.119 [BPC1](ERROR): Communications Fault
2018-03-10T13:22:30.162Z,1520688150.162 [CBIT](ERROR): Communications Fault in component: BPC1
2018-03-10T13:22:31.340Z,1520688151.340 [CBIT](INFO): Clearing failed state for component BPC1
2018-03-10T13:22:31.340Z,1520688151.340 [BPC1] No Fault, FailCount= 3
2018-03-10T13:22:34.122Z,1520688154.122 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-03-10T13:22:34.123Z,1520688154.123 [Default:CheckIn:C.Wait] Stopped
2018-03-10T13:22:34.123Z,1520688154.123 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-03-10T13:22:34.123Z,1520688154.123 [Default:CheckIn:D] Running Loop=1
2018-03-10T13:22:34.524Z,1520688154.524 [Default:CheckIn:D] Stopped
2018-03-10T13:22:34.524Z,1520688154.524 [Default:CheckIn:E] Running Loop=1
2018-03-10T13:22:34.929Z,1520688154.929 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 483.276725 min 
2018-03-10T13:22:34.929Z,1520688154.929 [Default:CheckIn:E] Stopped
2018-03-10T13:22:34.929Z,1520688154.929 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-03-10T13:22:34.929Z,1520688154.929 [Default:CheckIn] Stopped
2018-03-10T13:22:34.929Z,1520688154.929 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-03-10T13:22:34.930Z,1520688154.930 [Default:CheckIn](INFO): Running loop #48
2018-03-10T13:22:34.930Z,1520688154.930 [Default:CheckIn] Running Loop=48
2018-03-10T13:22:34.930Z,1520688154.930 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-03-10T13:22:34.930Z,1520688154.930 [Default:CheckIn:Read_GPS] Running Loop=1
2018-03-10T13:22:38.294Z,1520688158.294 [NAL9602](INFO): Powering up
2018-03-10T13:22:49.448Z,1520688169.448 [NAL9602](INFO): NAL9602 initialized
2018-03-10T13:23:01.885Z,1520688181.885 [BPC1](FAULT): Failed to initialize
2018-03-10T13:23:01.885Z,1520688181.885 [BPC1] Communications Fault, FailCount= 4
2018-03-10T13:23:01.885Z,1520688181.885 [BPC1](ERROR): Communications Fault
2018-03-10T13:23:01.915Z,1520688181.915 [CBIT](ERROR): Communications Fault in component: BPC1
2018-03-10T13:23:03.140Z,1520688183.140 [CBIT](INFO): Clearing failed state for component BPC1
2018-03-10T13:23:03.140Z,1520688183.140 [BPC1] No Fault, FailCount= 4
2018-03-10T13:24:10.809Z,1520688250.809 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T13:24:10.809Z,1520688250.809 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 85
2018-03-10T13:24:10.809Z,1520688250.809 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-10T13:24:10.822Z,1520688250.822 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-10T13:24:11.225Z,1520688251.225 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-10T13:24:11.225Z,1520688251.225 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 85
2018-03-10T13:24:11.614Z,1520688251.614 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-10T13:24:11.615Z,1520688251.615 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-10T13:24:11.615Z,1520688251.615 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-10T13:25:38.490Z,1520688338.490 [CBIT](DEBUG): EFC running - data check-sum false
2018-03-10T13:27:11.945Z,1520688431.945 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T13:27:11.945Z,1520688431.945 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 86
2018-03-10T13:27:11.945Z,1520688431.945 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-10T13:27:11.969Z,1520688431.969 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-10T13:27:12.396Z,1520688432.396 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-10T13:27:12.396Z,1520688432.396 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 86
2018-03-10T13:27:12.768Z,1520688432.768 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-10T13:27:12.769Z,1520688432.769 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-10T13:27:12.769Z,1520688432.769 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-10T13:27:35.149Z,1520688455.149 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-03-10T13:22:34.9Z
2018-03-10T13:27:35.149Z,1520688455.149 [Default:CheckIn:Read_GPS] Stopped
2018-03-10T13:27:35.149Z,1520688455.149 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-03-10T13:27:39.387Z,1520688459.387 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20180310T051512/Courier0192.lzma
2018-03-10T13:27:40.185Z,1520688460.185 [DataOverHttps](INFO): Moved sent file to Logs/20180310T051512/Courier0192.lzma.bak
2018-03-10T13:27:40.186Z,1520688460.186 [DataOverHttps](INFO): SBD MOMSN=8004982
2018-03-10T13:27:51.404Z,1520688471.404 [DataOverHttps](INFO): Sending 227 bytes from file Logs/20180310T051512/Express0193.lzma
2018-03-10T13:27:52.165Z,1520688472.165 [DataOverHttps](INFO): Moved sent file to Logs/20180310T051512/Express0193.lzma.bak
2018-03-10T13:27:52.166Z,1520688472.166 [DataOverHttps](INFO): SBD MOMSN=8004984
2018-03-10T13:27:52.862Z,1520688472.862 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session.
2018-03-10T13:27:52.927Z,1520688472.927 [Default:CheckIn:Read_Iridium] Stopped
2018-03-10T13:27:52.927Z,1520688472.927 [Default:CheckIn:C.Wait] Running Loop=1
2018-03-10T13:27:52.927Z,1520688472.927 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-03-10T13:28:23.152Z,1520688503.152 [NAL9602](INFO): Powering down
2018-03-10T13:30:13.075Z,1520688613.075 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T13:30:13.075Z,1520688613.075 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 87
2018-03-10T13:30:13.075Z,1520688613.075 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-10T13:30:13.088Z,1520688613.088 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-10T13:30:13.490Z,1520688613.490 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-10T13:30:13.490Z,1520688613.490 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 87
2018-03-10T13:30:13.877Z,1520688613.877 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-10T13:30:13.878Z,1520688613.878 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-10T13:30:13.878Z,1520688613.878 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-10T13:31:07.984Z,1520688667.984 [BPC1](ERROR): Failed to receive battery data
2018-03-10T13:31:07.984Z,1520688667.984 [BPC1] Communications Fault, FailCount= 1
2018-03-10T13:31:07.984Z,1520688667.984 [BPC1](ERROR): Communications Fault
2018-03-10T13:31:08.007Z,1520688668.007 [CBIT](ERROR): Communications Fault in component: BPC1
2018-03-10T13:31:09.206Z,1520688669.206 [CBIT](INFO): Clearing failed state for component BPC1
2018-03-10T13:31:09.206Z,1520688669.206 [BPC1] No Fault, FailCount= 1
2018-03-10T13:31:39.981Z,1520688699.981 [BPC1](FAULT): Failed to initialize
2018-03-10T13:31:39.981Z,1520688699.981 [BPC1] Communications Fault, FailCount= 2
2018-03-10T13:31:39.981Z,1520688699.981 [BPC1](ERROR): Communications Fault
2018-03-10T13:31:40.004Z,1520688700.004 [CBIT](ERROR): Communications Fault in component: BPC1
2018-03-10T13:31:41.210Z,1520688701.210 [CBIT](INFO): Clearing failed state for component BPC1
2018-03-10T13:31:41.210Z,1520688701.210 [BPC1] No Fault, FailCount= 2
2018-03-10T13:32:11.700Z,1520688731.700 [BPC1](FAULT): Failed to initialize
2018-03-10T13:32:11.700Z,1520688731.700 [BPC1] Communications Fault, FailCount= 3
2018-03-10T13:32:11.700Z,1520688731.700 [BPC1](ERROR): Communications Fault
2018-03-10T13:32:11.723Z,1520688731.723 [CBIT](ERROR): Communications Fault in component: BPC1
2018-03-10T13:32:12.924Z,1520688732.924 [CBIT](INFO): Clearing failed state for component BPC1
2018-03-10T13:32:12.924Z,1520688732.924 [BPC1] No Fault, FailCount= 3
2018-03-10T13:32:43.703Z,1520688763.703 [BPC1](FAULT): Failed to initialize
2018-03-10T13:32:43.703Z,1520688763.703 [BPC1] Communications Fault, FailCount= 4
2018-03-10T13:32:43.703Z,1520688763.703 [BPC1](ERROR): Communications Fault
2018-03-10T13:32:43.725Z,1520688763.725 [CBIT](ERROR): Communications Fault in component: BPC1
2018-03-10T13:32:44.928Z,1520688764.928 [CBIT](INFO): Clearing failed state for component BPC1
2018-03-10T13:32:44.928Z,1520688764.928 [BPC1] No Fault, FailCount= 4
2018-03-10T13:32:53.325Z,1520688773.325 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-03-10T13:32:53.326Z,1520688773.326 [Default:CheckIn:C.Wait] Stopped
2018-03-10T13:32:53.326Z,1520688773.326 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-03-10T13:32:53.326Z,1520688773.326 [Default:CheckIn:D] Running Loop=1
2018-03-10T13:32:53.716Z,1520688773.716 [Default:CheckIn:D] Stopped
2018-03-10T13:32:53.716Z,1520688773.716 [Default:CheckIn:E] Running Loop=1
2018-03-10T13:32:54.128Z,1520688774.128 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 493.596582 min 
2018-03-10T13:32:54.128Z,1520688774.128 [Default:CheckIn:E] Stopped
2018-03-10T13:32:54.128Z,1520688774.128 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-03-10T13:32:54.128Z,1520688774.128 [Default:CheckIn] Stopped
2018-03-10T13:32:54.128Z,1520688774.128 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-03-10T13:32:54.129Z,1520688774.129 [Default:CheckIn](INFO): Running loop #49
2018-03-10T13:32:54.129Z,1520688774.129 [Default:CheckIn] Running Loop=49
2018-03-10T13:32:54.129Z,1520688774.129 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-03-10T13:32:54.129Z,1520688774.129 [Default:CheckIn:Read_GPS] Running Loop=1
2018-03-10T13:32:57.310Z,1520688777.310 [NAL9602](INFO): Powering up
2018-03-10T13:33:08.464Z,1520688788.464 [NAL9602](INFO): NAL9602 initialized
2018-03-10T13:33:09.260Z,1520688789.260 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-03-10T13:33:09.260Z,1520688789.260 [NAL9602] Data Fault, FailCount= 3
2018-03-10T13:33:09.260Z,1520688789.260 [NAL9602](ERROR): Data Fault
2018-03-10T13:33:09.348Z,1520688789.348 [CBIT](ERROR): Data Fault in component: NAL9602
2018-03-10T13:33:09.661Z,1520688789.661 [NAL9602](INFO): Powering down
2018-03-10T13:33:10.506Z,1520688790.506 [CBIT](INFO): Clearing failed state for component NAL9602
2018-03-10T13:33:10.506Z,1520688790.506 [NAL9602] No Fault, FailCount= 3
2018-03-10T13:33:14.119Z,1520688794.119 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T13:33:14.119Z,1520688794.119 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 88
2018-03-10T13:33:14.119Z,1520688794.119 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-10T13:33:14.139Z,1520688794.139 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-10T13:33:14.549Z,1520688794.549 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-10T13:33:14.549Z,1520688794.549 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 88
2018-03-10T13:33:14.903Z,1520688794.903 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-10T13:33:14.904Z,1520688794.904 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-10T13:33:14.904Z,1520688794.904 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-10T13:33:39.673Z,1520688819.673 [NAL9602](INFO): Powering up NAL9602
2018-03-10T13:33:50.860Z,1520688830.860 [NAL9602](INFO): NAL9602 initialized
2018-03-10T13:35:38.518Z,1520688938.518 [CBIT](DEBUG): EFC running - data check-sum false
2018-03-10T13:36:15.063Z,1520688975.063 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T13:36:15.063Z,1520688975.063 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 89
2018-03-10T13:36:15.063Z,1520688975.063 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-10T13:36:15.088Z,1520688975.088 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-10T13:36:15.494Z,1520688975.494 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-10T13:36:15.494Z,1520688975.494 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 89
2018-03-10T13:36:15.883Z,1520688975.883 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-10T13:36:15.884Z,1520688975.884 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-10T13:36:15.884Z,1520688975.884 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-10T13:37:54.457Z,1520689074.457 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-03-10T13:32:54.1Z
2018-03-10T13:37:54.457Z,1520689074.457 [Default:CheckIn:Read_GPS] Stopped
2018-03-10T13:37:54.457Z,1520689074.457 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-03-10T13:37:58.931Z,1520689078.931 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20180310T051512/Courier0196.lzma
2018-03-10T13:37:59.729Z,1520689079.729 [DataOverHttps](INFO): Moved sent file to Logs/20180310T051512/Courier0196.lzma.bak
2018-03-10T13:37:59.730Z,1520689079.730 [DataOverHttps](INFO): SBD MOMSN=8005051
2018-03-10T13:38:09.764Z,1520689089.764 [DataOverHttps](INFO): Sending 244 bytes from file Logs/20180310T051512/Express0197.lzma
2018-03-10T13:38:10.566Z,1520689090.566 [DataOverHttps](INFO): Moved sent file to Logs/20180310T051512/Express0197.lzma.bak
2018-03-10T13:38:10.566Z,1520689090.566 [DataOverHttps](INFO): SBD MOMSN=8005053
2018-03-10T13:38:11.336Z,1520689091.336 [Default:CheckIn:Read_Iridium] Stopped
2018-03-10T13:38:11.336Z,1520689091.336 [Default:CheckIn:C.Wait] Running Loop=1
2018-03-10T13:38:11.336Z,1520689091.336 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-03-10T13:38:53.457Z,1520689133.457 [BPC1](ERROR): Bank A: No match for stick 7 serial number:1717 in the onboard configuration file.
2018-03-10T13:38:53.459Z,1520689133.459 [BPC1](ERROR): Failed to parse Bank A battery data
2018-03-10T13:38:53.459Z,1520689133.459 [BPC1] Data Fault, FailCount= 1
2018-03-10T13:38:53.459Z,1520689133.459 [BPC1](ERROR): Data Fault
2018-03-10T13:38:53.501Z,1520689133.501 [CBIT](ERROR): Data Fault in component: BPC1
2018-03-10T13:38:54.217Z,1520689134.217 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session.
2018-03-10T13:38:54.700Z,1520689134.700 [CBIT](INFO): Clearing failed state for component BPC1
2018-03-10T13:38:54.700Z,1520689134.700 [BPC1] No Fault, FailCount= 1
2018-03-10T13:39:15.939Z,1520689155.939 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T13:39:15.939Z,1520689155.939 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 90
2018-03-10T13:39:15.939Z,1520689155.939 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-10T13:39:15.962Z,1520689155.962 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-10T13:39:16.387Z,1520689156.387 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-10T13:39:16.387Z,1520689156.387 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 90
2018-03-10T13:39:16.774Z,1520689156.774 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-10T13:39:16.783Z,1520689156.783 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-10T13:39:16.783Z,1520689156.783 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-10T13:39:24.704Z,1520689164.704 [NAL9602](INFO): Powering down
2018-03-10T13:40:48.057Z,1520689248.057 [BPC1](ERROR): Failed to receive battery data
2018-03-10T13:40:48.057Z,1520689248.057 [BPC1] Communications Fault, FailCount= 1
2018-03-10T13:40:48.057Z,1520689248.057 [BPC1](ERROR): Communications Fault
2018-03-10T13:40:48.124Z,1520689248.124 [CBIT](ERROR): Communications Fault in component: BPC1
2018-03-10T13:40:49.275Z,1520689249.275 [CBIT](INFO): Clearing failed state for component BPC1
2018-03-10T13:40:49.275Z,1520689249.275 [BPC1] No Fault, FailCount= 1
2018-03-10T13:41:19.809Z,1520689279.809 [BPC1](FAULT): Failed to initialize
2018-03-10T13:41:19.809Z,1520689279.809 [BPC1] Communications Fault, FailCount= 2
2018-03-10T13:41:19.809Z,1520689279.809 [BPC1](ERROR): Communications Fault
2018-03-10T13:41:19.831Z,1520689279.831 [CBIT](ERROR): Communications Fault in component: BPC1
2018-03-10T13:41:21.032Z,1520689281.032 [CBIT](INFO): Clearing failed state for component BPC1
2018-03-10T13:41:21.032Z,1520689281.032 [BPC1] No Fault, FailCount= 2
2018-03-10T13:41:51.798Z,1520689311.798 [BPC1](FAULT): Failed to initialize
2018-03-10T13:41:51.798Z,1520689311.798 [BPC1] Communications Fault, FailCount= 3
2018-03-10T13:41:51.798Z,1520689311.798 [BPC1](ERROR): Communications Fault
2018-03-10T13:41:51.870Z,1520689311.870 [CBIT](ERROR): Communications Fault in component: BPC1
2018-03-10T13:41:53.028Z,1520689313.028 [CBIT](INFO): Clearing failed state for component BPC1
2018-03-10T13:41:53.028Z,1520689313.028 [BPC1] No Fault, FailCount= 3
2018-03-10T13:42:16.872Z,1520689336.872 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T13:42:16.873Z,1520689336.873 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 91
2018-03-10T13:42:16.873Z,1520689336.873 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-10T13:42:16.885Z,1520689336.885 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-10T13:42:17.254Z,1520689337.254 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-10T13:42:17.254Z,1520689337.254 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 91
2018-03-10T13:42:17.631Z,1520689337.631 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-10T13:42:17.632Z,1520689337.632 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-10T13:42:17.632Z,1520689337.632 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-10T13:42:23.626Z,1520689343.626 [BPC1](FAULT): Failed to initialize
2018-03-10T13:42:23.626Z,1520689343.626 [BPC1] Communications Fault, FailCount= 4
2018-03-10T13:42:23.626Z,1520689343.626 [BPC1](ERROR): Communications Fault
2018-03-10T13:42:23.656Z,1520689343.656 [CBIT](ERROR): Communications Fault in component: BPC1
2018-03-10T13:42:24.850Z,1520689344.850 [CBIT](INFO): Clearing failed state for component BPC1
2018-03-10T13:42:24.871Z,1520689344.871 [BPC1] No Fault, FailCount= 4
2018-03-10T13:43:11.647Z,1520689391.647 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-03-10T13:43:11.647Z,1520689391.647 [Default:CheckIn:C.Wait] Stopped
2018-03-10T13:43:11.647Z,1520689391.647 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-03-10T13:43:11.647Z,1520689391.647 [Default:CheckIn:D] Running Loop=1
2018-03-10T13:43:12.047Z,1520689392.047 [Default:CheckIn:D] Stopped
2018-03-10T13:43:12.047Z,1520689392.047 [Default:CheckIn:E] Running Loop=1
2018-03-10T13:43:12.452Z,1520689392.452 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 503.902116 min 
2018-03-10T13:43:12.452Z,1520689392.452 [Default:CheckIn:E] Stopped
2018-03-10T13:43:12.452Z,1520689392.452 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-03-10T13:43:12.452Z,1520689392.452 [Default:CheckIn] Stopped
2018-03-10T13:43:12.452Z,1520689392.452 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-03-10T13:43:12.453Z,1520689392.453 [Default:CheckIn](INFO): Running loop #50
2018-03-10T13:43:12.453Z,1520689392.453 [Default:CheckIn] Running Loop=50
2018-03-10T13:43:12.453Z,1520689392.453 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-03-10T13:43:12.453Z,1520689392.453 [Default:CheckIn:Read_GPS] Running Loop=1
2018-03-10T13:43:15.824Z,1520689395.824 [NAL9602](INFO): Powering up
2018-03-10T13:43:26.992Z,1520689406.992 [NAL9602](INFO): NAL9602 initialized
2018-03-10T13:43:58.972Z,1520689438.972 [NAL9602](ERROR): Failed to receive proper response when querying signal strength for MT queue check.
2018-03-10T13:43:59.051Z,1520689439.051 [NAL9602](FAULT): received: 
+CSQ:0

OK35, 0, 0, 0, 0

OK
2018-03-10T13:43:59.051Z,1520689439.051 [NAL9602] Data Fault, FailCount= 4
2018-03-10T13:43:59.051Z,1520689439.051 [NAL9602](ERROR): Data Fault
2018-03-10T13:43:59.142Z,1520689439.142 [CBIT](ERROR): Data Fault in component: NAL9602
2018-03-10T13:43:59.372Z,1520689439.372 [NAL9602](INFO): Powering down
2018-03-10T13:44:00.233Z,1520689440.233 [CBIT](INFO): Clearing failed state for component NAL9602
2018-03-10T13:44:00.233Z,1520689440.233 [NAL9602] No Fault, FailCount= 4
2018-03-10T13:44:29.538Z,1520689469.538 [NAL9602](INFO): Powering up NAL9602
2018-03-10T13:44:40.748Z,1520689480.748 [NAL9602](INFO): NAL9602 initialized
2018-03-10T13:44:41.513Z,1520689481.513 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-03-10T13:44:41.513Z,1520689481.513 [NAL9602] Data Fault, FailCount= 5
2018-03-10T13:44:41.513Z,1520689481.513 [NAL9602](ERROR): Data Fault
2018-03-10T13:44:41.587Z,1520689481.587 [CBIT](ERROR): Data Fault in component: NAL9602
2018-03-10T13:44:41.588Z,1520689481.588 [CBIT](CRITICAL): Data Fault in component: NAL9602
2018-03-10T13:44:41.929Z,1520689481.929 [NAL9602](INFO): Powering down
2018-03-10T13:44:42.018Z,1520689482.018 [CBIT](INFO): Critical error at 20180310T134441
2018-03-10T13:45:17.650Z,1520689517.650 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T13:45:17.651Z,1520689517.651 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 92
2018-03-10T13:45:17.651Z,1520689517.651 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-10T13:45:17.663Z,1520689517.663 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-10T13:45:18.016Z,1520689518.016 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-10T13:45:18.017Z,1520689518.017 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 92
2018-03-10T13:45:18.409Z,1520689518.409 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-10T13:45:18.410Z,1520689518.410 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-10T13:45:18.410Z,1520689518.410 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-10T13:45:38.820Z,1520689538.820 [CBIT](DEBUG): EFC running - data check-sum false
2018-03-10T13:46:41.799Z,1520689601.799 [CBIT](INFO): Clearing failed state for component NAL9602
2018-03-10T13:46:41.799Z,1520689601.799 [NAL9602] No Fault, FailCount= 5
2018-03-10T13:46:42.136Z,1520689602.136 [NAL9602](INFO): Powering up NAL9602
2018-03-10T13:46:52.936Z,1520689612.936 [NAL9602](INFO): NAL9602 initialized
2018-03-10T13:48:12.689Z,1520689692.689 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-03-10T13:43:12.5Z
2018-03-10T13:48:12.689Z,1520689692.689 [Default:CheckIn:Read_GPS] Stopped
2018-03-10T13:48:12.689Z,1520689692.689 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-03-10T13:48:17.224Z,1520689697.224 [DataOverHttps](INFO): Sending 69 bytes from file Logs/20180310T051512/Courier0200.lzma
2018-03-10T13:48:17.998Z,1520689697.998 [DataOverHttps](INFO): Moved sent file to Logs/20180310T051512/Courier0200.lzma.bak
2018-03-10T13:48:17.998Z,1520689697.998 [DataOverHttps](INFO): SBD MOMSN=8005103
2018-03-10T13:48:18.765Z,1520689698.765 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T13:48:18.765Z,1520689698.765 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 93
2018-03-10T13:48:18.765Z,1520689698.765 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-10T13:48:18.778Z,1520689698.778 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-10T13:48:18.956Z,1520689698.956 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-10T13:48:18.956Z,1520689698.956 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 93
2018-03-10T13:48:19.254Z,1520689699.254 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-10T13:48:19.254Z,1520689699.254 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-10T13:48:19.279Z,1520689699.279 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-10T13:48:29.889Z,1520689709.889 [DataOverHttps](INFO): Sending 279 bytes from file Logs/20180310T051512/Express0201.lzma
2018-03-10T13:48:30.276Z,1520689710.276 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session.
2018-03-10T13:48:30.677Z,1520689710.677 [DataOverHttps](INFO): Moved sent file to Logs/20180310T051512/Express0201.lzma.bak
2018-03-10T13:48:30.678Z,1520689710.678 [DataOverHttps](INFO): SBD MOMSN=8005106
2018-03-10T13:48:31.447Z,1520689711.447 [Default:CheckIn:Read_Iridium] Stopped
2018-03-10T13:48:31.447Z,1520689711.447 [Default:CheckIn:C.Wait] Running Loop=1
2018-03-10T13:48:31.447Z,1520689711.447 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-03-10T13:49:00.761Z,1520689740.761 [NAL9602](INFO): Powering down
2018-03-10T13:50:18.979Z,1520689818.979 [BPC1](ERROR): Failed to receive battery data
2018-03-10T13:50:18.979Z,1520689818.979 [BPC1] Communications Fault, FailCount= 1
2018-03-10T13:50:18.979Z,1520689818.979 [BPC1](ERROR): Communications Fault
2018-03-10T13:50:19.008Z,1520689819.008 [CBIT](ERROR): Communications Fault in component: BPC1
2018-03-10T13:50:20.211Z,1520689820.211 [CBIT](INFO): Clearing failed state for component BPC1
2018-03-10T13:50:20.211Z,1520689820.211 [BPC1] No Fault, FailCount= 1
2018-03-10T13:50:50.700Z,1520689850.700 [BPC1](FAULT): Failed to initialize
2018-03-10T13:50:50.700Z,1520689850.700 [BPC1] Communications Fault, FailCount= 2
2018-03-10T13:50:50.701Z,1520689850.701 [BPC1](ERROR): Communications Fault
2018-03-10T13:50:50.726Z,1520689850.726 [CBIT](ERROR): Communications Fault in component: BPC1
2018-03-10T13:50:51.931Z,1520689851.931 [CBIT](INFO): Clearing failed state for component BPC1
2018-03-10T13:50:51.931Z,1520689851.931 [BPC1] No Fault, FailCount= 2
2018-03-10T13:51:19.521Z,1520689879.521 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T13:51:19.522Z,1520689879.522 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 94
2018-03-10T13:51:19.522Z,1520689879.522 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-10T13:51:19.534Z,1520689879.534 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-10T13:51:19.940Z,1520689879.940 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-10T13:51:19.940Z,1520689879.940 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 94
2018-03-10T13:51:20.340Z,1520689880.340 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-10T13:51:20.340Z,1520689880.340 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-10T13:51:20.340Z,1520689880.340 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-10T13:51:22.692Z,1520689882.692 [BPC1](FAULT): Failed to initialize
2018-03-10T13:51:22.692Z,1520689882.692 [BPC1] Communications Fault, FailCount= 3
2018-03-10T13:51:22.692Z,1520689882.692 [BPC1](ERROR): Communications Fault
2018-03-10T13:51:22.795Z,1520689882.795 [CBIT](ERROR): Communications Fault in component: BPC1
2018-03-10T13:51:23.976Z,1520689883.976 [CBIT](INFO): Clearing failed state for component BPC1
2018-03-10T13:51:23.976Z,1520689883.976 [BPC1] No Fault, FailCount= 3
2018-03-10T13:51:54.398Z,1520689914.398 [BPC1](FAULT): Failed to initialize
2018-03-10T13:51:54.398Z,1520689914.398 [BPC1] Communications Fault, FailCount= 4
2018-03-10T13:51:54.398Z,1520689914.398 [BPC1](ERROR): Communications Fault
2018-03-10T13:51:54.493Z,1520689914.493 [CBIT](ERROR): Communications Fault in component: BPC1
2018-03-10T13:51:55.677Z,1520689915.677 [CBIT](INFO): Clearing failed state for component BPC1
2018-03-10T13:51:55.677Z,1520689915.677 [BPC1] No Fault, FailCount= 4
2018-03-10T13:53:31.801Z,1520690011.801 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-03-10T13:53:31.801Z,1520690011.801 [Default:CheckIn:C.Wait] Stopped
2018-03-10T13:53:31.802Z,1520690011.802 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-03-10T13:53:31.802Z,1520690011.802 [Default:CheckIn:D] Running Loop=1
2018-03-10T13:53:32.200Z,1520690012.200 [Default:CheckIn:D] Stopped
2018-03-10T13:53:32.200Z,1520690012.200 [Default:CheckIn:E] Running Loop=1
2018-03-10T13:53:32.603Z,1520690012.603 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 514.237988 min 
2018-03-10T13:53:32.603Z,1520690012.603 [Default:CheckIn:E] Stopped
2018-03-10T13:53:32.604Z,1520690012.604 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-03-10T13:53:32.604Z,1520690012.604 [Default:CheckIn] Stopped
2018-03-10T13:53:32.604Z,1520690012.604 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-03-10T13:53:32.604Z,1520690012.604 [Default:CheckIn](INFO): Running loop #51
2018-03-10T13:53:32.604Z,1520690012.604 [Default:CheckIn] Running Loop=51
2018-03-10T13:53:32.604Z,1520690012.604 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-03-10T13:53:32.604Z,1520690012.604 [Default:CheckIn:Read_GPS] Running Loop=1
2018-03-10T13:53:35.945Z,1520690015.945 [NAL9602](INFO): Powering up
2018-03-10T13:53:47.092Z,1520690027.092 [NAL9602](INFO): NAL9602 initialized
2018-03-10T13:54:20.351Z,1520690060.351 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T13:54:20.351Z,1520690060.351 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 95
2018-03-10T13:54:20.352Z,1520690060.352 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-10T13:54:20.364Z,1520690060.364 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-10T13:54:20.768Z,1520690060.768 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-10T13:54:20.768Z,1520690060.768 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 95
2018-03-10T13:54:21.154Z,1520690061.154 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-10T13:54:21.154Z,1520690061.154 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-10T13:54:21.154Z,1520690061.154 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-10T13:55:39.041Z,1520690139.041 [CBIT](DEBUG): EFC running - data check-sum false
2018-03-10T13:57:21.280Z,1520690241.280 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T13:57:21.280Z,1520690241.280 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 96
2018-03-10T13:57:21.280Z,1520690241.280 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-10T13:57:21.292Z,1520690241.292 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-10T13:57:21.698Z,1520690241.698 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-10T13:57:21.698Z,1520690241.698 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 96
2018-03-10T13:57:22.080Z,1520690242.080 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-10T13:57:22.080Z,1520690242.080 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-10T13:57:22.080Z,1520690242.080 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-10T13:58:32.971Z,1520690312.971 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-03-10T13:53:32.6Z
2018-03-10T13:58:32.971Z,1520690312.971 [Default:CheckIn:Read_GPS] Stopped
2018-03-10T13:58:32.971Z,1520690312.971 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-03-10T13:58:37.199Z,1520690317.199 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20180310T051512/Courier0204.lzma
2018-03-10T13:58:37.997Z,1520690317.997 [DataOverHttps](INFO): Moved sent file to Logs/20180310T051512/Courier0204.lzma.bak
2018-03-10T13:58:37.998Z,1520690317.998 [DataOverHttps](INFO): SBD MOMSN=8005170
2018-03-10T13:58:49.553Z,1520690329.553 [DataOverHttps](INFO): Sending 227 bytes from file Logs/20180310T051512/Express0205.lzma
2018-03-10T13:58:50.479Z,1520690330.479 [DataOverHttps](INFO): Moved sent file to Logs/20180310T051512/Express0205.lzma.bak
2018-03-10T13:58:50.479Z,1520690330.479 [DataOverHttps](INFO): SBD MOMSN=8005172
2018-03-10T13:58:50.512Z,1520690330.512 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session.
2018-03-10T13:58:51.228Z,1520690331.228 [Default:CheckIn:Read_Iridium] Stopped
2018-03-10T13:58:51.228Z,1520690331.228 [Default:CheckIn:C.Wait] Running Loop=1
2018-03-10T13:58:51.228Z,1520690331.228 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-03-10T13:59:21.316Z,1520690361.316 [NAL9602](INFO): Powering down
2018-03-10T14:00:04.743Z,1520690404.743 [BPC1](ERROR): Failed to receive battery data
2018-03-10T14:00:04.743Z,1520690404.743 [BPC1] Communications Fault, FailCount= 1
2018-03-10T14:00:04.744Z,1520690404.744 [BPC1](ERROR): Communications Fault
2018-03-10T14:00:04.793Z,1520690404.793 [CBIT](ERROR): Communications Fault in component: BPC1
2018-03-10T14:00:06.040Z,1520690406.040 [CBIT](INFO): Clearing failed state for component BPC1
2018-03-10T14:00:06.040Z,1520690406.040 [BPC1] No Fault, FailCount= 1
2018-03-10T14:00:22.376Z,1520690422.376 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T14:00:22.376Z,1520690422.376 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 97
2018-03-10T14:00:22.376Z,1520690422.376 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-10T14:00:22.392Z,1520690422.392 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-10T14:00:22.787Z,1520690422.787 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-10T14:00:22.787Z,1520690422.787 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 97
2018-03-10T14:00:23.172Z,1520690423.172 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-10T14:00:23.173Z,1520690423.173 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-10T14:00:23.173Z,1520690423.173 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-10T14:00:36.767Z,1520690436.767 [BPC1](FAULT): Failed to initialize
2018-03-10T14:00:36.771Z,1520690436.771 [BPC1] Communications Fault, FailCount= 2
2018-03-10T14:00:36.771Z,1520690436.771 [BPC1](ERROR): Communications Fault
2018-03-10T14:00:36.828Z,1520690436.828 [CBIT](ERROR): Communications Fault in component: BPC1
2018-03-10T14:00:38.006Z,1520690438.006 [CBIT](INFO): Clearing failed state for component BPC1
2018-03-10T14:00:38.006Z,1520690438.006 [BPC1] No Fault, FailCount= 2
2018-03-10T14:01:08.789Z,1520690468.789 [BPC1](FAULT): Failed to initialize
2018-03-10T14:01:08.789Z,1520690468.789 [BPC1] Communications Fault, FailCount= 3
2018-03-10T14:01:08.789Z,1520690468.789 [BPC1](ERROR): Communications Fault
2018-03-10T14:01:08.848Z,1520690468.848 [CBIT](ERROR): Communications Fault in component: BPC1
2018-03-10T14:01:10.031Z,1520690470.031 [CBIT](INFO): Clearing failed state for component BPC1
2018-03-10T14:01:10.031Z,1520690470.031 [BPC1] No Fault, FailCount= 3
2018-03-10T14:01:40.782Z,1520690500.782 [BPC1](FAULT): Failed to initialize
2018-03-10T14:01:40.782Z,1520690500.782 [BPC1] Communications Fault, FailCount= 4
2018-03-10T14:01:40.782Z,1520690500.782 [BPC1](ERROR): Communications Fault
2018-03-10T14:01:40.833Z,1520690500.833 [CBIT](ERROR): Communications Fault in component: BPC1
2018-03-10T14:01:42.042Z,1520690502.042 [CBIT](INFO): Clearing failed state for component BPC1
2018-03-10T14:01:42.042Z,1520690502.042 [BPC1] No Fault, FailCount= 4
2018-03-10T14:03:23.494Z,1520690603.494 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T14:03:23.494Z,1520690603.494 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 98
2018-03-10T14:03:23.495Z,1520690603.495 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-10T14:03:23.511Z,1520690603.511 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-10T14:03:23.922Z,1520690603.922 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-10T14:03:23.922Z,1520690603.922 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 98
2018-03-10T14:03:24.274Z,1520690604.274 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-10T14:03:24.274Z,1520690604.274 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-10T14:03:24.291Z,1520690604.291 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-10T14:03:51.494Z,1520690631.494 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-03-10T14:03:51.494Z,1520690631.494 [Default:CheckIn:C.Wait] Stopped
2018-03-10T14:03:51.494Z,1520690631.494 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-03-10T14:03:51.494Z,1520690631.494 [Default:CheckIn:D] Running Loop=1
2018-03-10T14:03:51.885Z,1520690631.885 [Default:CheckIn:D] Stopped
2018-03-10T14:03:51.885Z,1520690631.885 [Default:CheckIn:E] Running Loop=1
2018-03-10T14:03:52.296Z,1520690632.296 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 524.566081 min 
2018-03-10T14:03:52.297Z,1520690632.297 [Default:CheckIn:E] Stopped
2018-03-10T14:03:52.297Z,1520690632.297 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-03-10T14:03:52.297Z,1520690632.297 [Default:CheckIn] Stopped
2018-03-10T14:03:52.297Z,1520690632.297 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-03-10T14:03:52.297Z,1520690632.297 [Default:CheckIn](INFO): Running loop #52
2018-03-10T14:03:52.297Z,1520690632.297 [Default:CheckIn] Running Loop=52
2018-03-10T14:03:52.297Z,1520690632.297 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-03-10T14:03:52.297Z,1520690632.297 [Default:CheckIn:Read_GPS] Running Loop=1
2018-03-10T14:03:55.754Z,1520690635.754 [NAL9602](INFO): Powering up
2018-03-10T14:04:06.928Z,1520690646.928 [NAL9602](INFO): NAL9602 initialized
2018-03-10T14:04:07.728Z,1520690647.728 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-03-10T14:04:07.728Z,1520690647.728 [NAL9602] Data Fault, FailCount= 1
2018-03-10T14:04:07.728Z,1520690647.728 [NAL9602](ERROR): Data Fault
2018-03-10T14:04:07.820Z,1520690647.820 [CBIT](ERROR): Data Fault in component: NAL9602
2018-03-10T14:04:08.124Z,1520690648.124 [NAL9602](INFO): Powering down
2018-03-10T14:04:08.994Z,1520690648.994 [CBIT](INFO): Clearing failed state for component NAL9602
2018-03-10T14:04:08.994Z,1520690648.994 [NAL9602] No Fault, FailCount= 1
2018-03-10T14:04:38.528Z,1520690678.528 [NAL9602](INFO): Powering up NAL9602
2018-03-10T14:04:49.728Z,1520690689.728 [NAL9602](INFO): NAL9602 initialized
2018-03-10T14:05:39.268Z,1520690739.268 [CBIT](DEBUG): EFC running - data check-sum false
2018-03-10T14:06:24.625Z,1520690784.625 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T14:06:24.625Z,1520690784.625 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 99
2018-03-10T14:06:24.625Z,1520690784.625 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-10T14:06:24.674Z,1520690784.674 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-10T14:06:25.036Z,1520690785.036 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-10T14:06:25.036Z,1520690785.036 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 99
2018-03-10T14:06:25.420Z,1520690785.420 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-10T14:06:25.420Z,1520690785.420 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-10T14:06:25.421Z,1520690785.421 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-10T14:08:52.582Z,1520690932.582 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-03-10T14:03:52.3Z
2018-03-10T14:08:52.582Z,1520690932.582 [Default:CheckIn:Read_GPS] Stopped
2018-03-10T14:08:52.582Z,1520690932.582 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-03-10T14:08:57.067Z,1520690937.067 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20180310T051512/Courier0208.lzma
2018-03-10T14:08:57.865Z,1520690937.865 [DataOverHttps](INFO): Moved sent file to Logs/20180310T051512/Courier0208.lzma.bak
2018-03-10T14:08:57.866Z,1520690937.866 [DataOverHttps](INFO): SBD MOMSN=8005228
2018-03-10T14:09:07.927Z,1520690947.927 [DataOverHttps](INFO): Sending 245 bytes from file Logs/20180310T051512/Express0209.lzma
2018-03-10T14:09:08.721Z,1520690948.721 [DataOverHttps](INFO): Moved sent file to Logs/20180310T051512/Express0209.lzma.bak
2018-03-10T14:09:08.721Z,1520690948.721 [DataOverHttps](INFO): SBD MOMSN=8005230
2018-03-10T14:09:09.773Z,1520690949.773 [Default:CheckIn:Read_Iridium] Stopped
2018-03-10T14:09:09.773Z,1520690949.773 [Default:CheckIn:C.Wait] Running Loop=1
2018-03-10T14:09:09.773Z,1520690949.773 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-03-10T14:09:25.762Z,1520690965.762 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T14:09:25.763Z,1520690965.763 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 100
2018-03-10T14:09:25.763Z,1520690965.763 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-10T14:09:25.775Z,1520690965.775 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-10T14:09:26.135Z,1520690966.135 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-10T14:09:26.135Z,1520690966.135 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 100
2018-03-10T14:09:26.529Z,1520690966.529 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-10T14:09:26.529Z,1520690966.529 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-10T14:09:26.529Z,1520690966.529 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-10T14:09:45.346Z,1520690985.346 [BPC1](ERROR): Failed to receive battery data
2018-03-10T14:09:45.346Z,1520690985.346 [BPC1] Communications Fault, FailCount= 1
2018-03-10T14:09:45.346Z,1520690985.346 [BPC1](ERROR): Communications Fault
2018-03-10T14:09:45.431Z,1520690985.431 [CBIT](ERROR): Communications Fault in component: BPC1
2018-03-10T14:09:46.565Z,1520690986.565 [CBIT](INFO): Clearing failed state for component BPC1
2018-03-10T14:09:46.566Z,1520690986.566 [BPC1] No Fault, FailCount= 1
2018-03-10T14:09:56.076Z,1520690996.076 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session.
2018-03-10T14:10:17.384Z,1520691017.384 [BPC1](FAULT): Failed to initialize
2018-03-10T14:10:17.384Z,1520691017.384 [BPC1] Communications Fault, FailCount= 2
2018-03-10T14:10:17.384Z,1520691017.384 [BPC1](ERROR): Communications Fault
2018-03-10T14:10:17.436Z,1520691017.436 [CBIT](ERROR): Communications Fault in component: BPC1
2018-03-10T14:10:18.612Z,1520691018.612 [CBIT](INFO): Clearing failed state for component BPC1
2018-03-10T14:10:18.612Z,1520691018.612 [BPC1] No Fault, FailCount= 2
2018-03-10T14:10:26.549Z,1520691026.549 [NAL9602](INFO): Powering down
2018-03-10T14:10:49.372Z,1520691049.372 [BPC1](FAULT): Failed to initialize
2018-03-10T14:10:49.372Z,1520691049.372 [BPC1] Communications Fault, FailCount= 3
2018-03-10T14:10:49.373Z,1520691049.373 [BPC1](ERROR): Communications Fault
2018-03-10T14:10:49.424Z,1520691049.424 [CBIT](ERROR): Communications Fault in component: BPC1
2018-03-10T14:10:50.611Z,1520691050.611 [CBIT](INFO): Clearing failed state for component BPC1
2018-03-10T14:10:50.611Z,1520691050.611 [BPC1] No Fault, FailCount= 3
2018-03-10T14:11:21.404Z,1520691081.404 [BPC1](FAULT): Failed to initialize
2018-03-10T14:11:21.404Z,1520691081.404 [BPC1] Communications Fault, FailCount= 4
2018-03-10T14:11:21.404Z,1520691081.404 [BPC1](ERROR): Communications Fault
2018-03-10T14:11:21.427Z,1520691081.427 [CBIT](ERROR): Communications Fault in component: BPC1
2018-03-10T14:11:22.638Z,1520691082.638 [CBIT](INFO): Clearing failed state for component BPC1
2018-03-10T14:11:22.638Z,1520691082.638 [BPC1] No Fault, FailCount= 4
2018-03-10T14:12:26.593Z,1520691146.593 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T14:12:26.593Z,1520691146.593 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 101
2018-03-10T14:12:26.593Z,1520691146.593 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-10T14:12:26.662Z,1520691146.662 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-10T14:12:27.003Z,1520691147.003 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-10T14:12:27.003Z,1520691147.003 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 101
2018-03-10T14:12:27.361Z,1520691147.361 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-10T14:12:27.361Z,1520691147.361 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-10T14:12:27.361Z,1520691147.361 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-10T14:14:10.291Z,1520691250.291 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-03-10T14:14:10.291Z,1520691250.291 [Default:CheckIn:C.Wait] Stopped
2018-03-10T14:14:10.291Z,1520691250.291 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-03-10T14:14:10.291Z,1520691250.291 [Default:CheckIn:D] Running Loop=1
2018-03-10T14:14:10.687Z,1520691250.687 [Default:CheckIn:D] Stopped
2018-03-10T14:14:10.687Z,1520691250.687 [Default:CheckIn:E] Running Loop=1
2018-03-10T14:14:13.957Z,1520691253.957 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 534.879427 min 
2018-03-10T14:14:13.957Z,1520691253.957 [Default:CheckIn:E] Stopped
2018-03-10T14:14:13.957Z,1520691253.957 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-03-10T14:14:13.957Z,1520691253.957 [Default:CheckIn] Stopped
2018-03-10T14:14:13.957Z,1520691253.957 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-03-10T14:14:13.957Z,1520691253.957 [Default:CheckIn](INFO): Running loop #53
2018-03-10T14:14:13.957Z,1520691253.957 [Default:CheckIn] Running Loop=53
2018-03-10T14:14:13.958Z,1520691253.958 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-03-10T14:14:13.958Z,1520691253.958 [Default:CheckIn:Read_GPS] Running Loop=1
2018-03-10T14:14:14.452Z,1520691254.452 [NAL9602](INFO): Powering up
2018-03-10T14:14:25.644Z,1520691265.644 [NAL9602](INFO): NAL9602 initialized
2018-03-10T14:14:57.640Z,1520691297.640 [NAL9602](ERROR): Failed to receive proper response when querying signal strength for MT queue check.
2018-03-10T14:14:57.719Z,1520691297.719 [NAL9602](FAULT): received: 
+CSQ:0

OK35, 0, 0, 0, 0

OK
2018-03-10T14:14:57.719Z,1520691297.719 [NAL9602] Data Fault, FailCount= 2
2018-03-10T14:14:57.719Z,1520691297.719 [NAL9602](ERROR): Data Fault
2018-03-10T14:14:57.800Z,1520691297.800 [CBIT](ERROR): Data Fault in component: NAL9602
2018-03-10T14:14:58.036Z,1520691298.036 [NAL9602](INFO): Powering down
2018-03-10T14:14:58.896Z,1520691298.896 [CBIT](INFO): Clearing failed state for component NAL9602
2018-03-10T14:14:58.896Z,1520691298.896 [NAL9602] No Fault, FailCount= 2
2018-03-10T14:15:27.446Z,1520691327.446 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T14:15:27.446Z,1520691327.446 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 102
2018-03-10T14:15:27.446Z,1520691327.446 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-10T14:15:27.475Z,1520691327.475 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-10T14:15:27.867Z,1520691327.867 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-10T14:15:27.867Z,1520691327.867 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 102
2018-03-10T14:15:28.216Z,1520691328.216 [NAL9602](INFO): Powering up NAL9602
2018-03-10T14:15:28.263Z,1520691328.263 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-10T14:15:28.263Z,1520691328.263 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-10T14:15:28.264Z,1520691328.264 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-10T14:15:39.404Z,1520691339.404 [NAL9602](INFO): NAL9602 initialized
2018-03-10T14:15:39.485Z,1520691339.485 [CBIT](DEBUG): EFC running - data check-sum false
2018-03-10T14:15:40.204Z,1520691340.204 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-03-10T14:15:40.204Z,1520691340.204 [NAL9602] Data Fault, FailCount= 3
2018-03-10T14:15:40.204Z,1520691340.204 [NAL9602](ERROR): Data Fault
2018-03-10T14:15:40.289Z,1520691340.289 [CBIT](ERROR): Data Fault in component: NAL9602
2018-03-10T14:15:40.612Z,1520691340.612 [NAL9602](INFO): Powering down
2018-03-10T14:15:41.493Z,1520691341.493 [CBIT](INFO): Clearing failed state for component NAL9602
2018-03-10T14:15:41.493Z,1520691341.493 [NAL9602] No Fault, FailCount= 3
2018-03-10T14:16:11.009Z,1520691371.009 [NAL9602](INFO): Powering up NAL9602
2018-03-10T14:16:21.896Z,1520691381.896 [NAL9602](INFO): NAL9602 initialized
2018-03-10T14:18:28.632Z,1520691508.632 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T14:18:28.632Z,1520691508.632 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 103
2018-03-10T14:18:28.632Z,1520691508.632 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-10T14:18:28.645Z,1520691508.645 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-10T14:18:29.060Z,1520691509.060 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-10T14:18:29.060Z,1520691509.060 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 103
2018-03-10T14:18:29.469Z,1520691509.469 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-10T14:18:29.469Z,1520691509.469 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-10T14:18:29.470Z,1520691509.470 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-10T14:19:14.769Z,1520691554.769 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-03-10T14:14:13.0Z
2018-03-10T14:19:14.769Z,1520691554.769 [Default:CheckIn:Read_GPS] Stopped
2018-03-10T14:19:14.769Z,1520691554.769 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-03-10T14:19:15.346Z,1520691555.346 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20180310T051512/Courier0212.lzma
2018-03-10T14:19:16.010Z,1520691556.010 [DataOverHttps](INFO): Moved sent file to Logs/20180310T051512/Courier0212.lzma.bak
2018-03-10T14:19:16.010Z,1520691556.010 [DataOverHttps](INFO): SBD MOMSN=8005299
2018-03-10T14:19:25.804Z,1520691565.804 [BPC1](ERROR): Failed to receive battery data
2018-03-10T14:19:25.804Z,1520691565.804 [BPC1] Communications Fault, FailCount= 1
2018-03-10T14:19:25.804Z,1520691565.804 [BPC1](ERROR): Communications Fault
2018-03-10T14:19:25.841Z,1520691565.841 [CBIT](ERROR): Communications Fault in component: BPC1
2018-03-10T14:19:26.288Z,1520691566.288 [DataOverHttps](INFO): Sending 280 bytes from file Logs/20180310T051512/Express0213.lzma
2018-03-10T14:19:26.790Z,1520691566.790 [CBIT](INFO): Clearing failed state for component BPC1
2018-03-10T14:19:26.790Z,1520691566.790 [BPC1] No Fault, FailCount= 1
2018-03-10T14:19:27.085Z,1520691567.085 [DataOverHttps](INFO): Moved sent file to Logs/20180310T051512/Express0213.lzma.bak
2018-03-10T14:19:27.086Z,1520691567.086 [DataOverHttps](INFO): SBD MOMSN=8005301
2018-03-10T14:19:27.806Z,1520691567.806 [Default:CheckIn:Read_Iridium] Stopped
2018-03-10T14:19:27.806Z,1520691567.806 [Default:CheckIn:C.Wait] Running Loop=1
2018-03-10T14:19:27.806Z,1520691567.806 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-03-10T14:19:31.470Z,1520691571.470 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session.
2018-03-10T14:19:57.580Z,1520691597.580 [BPC1](FAULT): Failed to initialize
2018-03-10T14:19:57.580Z,1520691597.580 [BPC1] Communications Fault, FailCount= 2
2018-03-10T14:19:57.580Z,1520691597.580 [BPC1](ERROR): Communications Fault
2018-03-10T14:19:57.602Z,1520691597.602 [CBIT](ERROR): Communications Fault in component: BPC1
2018-03-10T14:19:58.812Z,1520691598.812 [CBIT](INFO): Clearing failed state for component BPC1
2018-03-10T14:19:58.812Z,1520691598.812 [BPC1] No Fault, FailCount= 2
2018-03-10T14:20:01.956Z,1520691601.956 [NAL9602](INFO): Powering down
2018-03-10T14:20:31.680Z,1520691631.680 [BPC1](FAULT): Failed to initialize
2018-03-10T14:20:31.680Z,1520691631.680 [BPC1] Communications Fault, FailCount= 3
2018-03-10T14:20:31.680Z,1520691631.680 [BPC1](ERROR): Communications Fault
2018-03-10T14:20:31.702Z,1520691631.702 [CBIT](ERROR): Communications Fault in component: BPC1
2018-03-10T14:20:32.573Z,1520691632.573 [CBIT](INFO): Clearing failed state for component BPC1
2018-03-10T14:20:32.573Z,1520691632.573 [BPC1] No Fault, FailCount= 3
2018-03-10T14:21:03.351Z,1520691663.351 [BPC1](FAULT): Failed to initialize
2018-03-10T14:21:03.351Z,1520691663.351 [BPC1] Communications Fault, FailCount= 4
2018-03-10T14:21:03.351Z,1520691663.351 [BPC1](ERROR): Communications Fault
2018-03-10T14:21:03.420Z,1520691663.420 [CBIT](ERROR): Communications Fault in component: BPC1
2018-03-10T14:21:04.573Z,1520691664.573 [CBIT](INFO): Clearing failed state for component BPC1
2018-03-10T14:21:04.574Z,1520691664.574 [BPC1] No Fault, FailCount= 4
2018-03-10T14:21:31.766Z,1520691691.766 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T14:21:31.766Z,1520691691.766 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 104
2018-03-10T14:21:31.766Z,1520691691.766 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-10T14:21:31.779Z,1520691691.779 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-10T14:21:31.911Z,1520691691.911 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-10T14:21:31.911Z,1520691691.911 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 104
2018-03-10T14:21:32.247Z,1520691692.247 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-10T14:21:32.248Z,1520691692.248 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-10T14:21:32.248Z,1520691692.248 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-10T14:24:28.145Z,1520691868.145 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-03-10T14:24:28.145Z,1520691868.145 [Default:CheckIn:C.Wait] Stopped
2018-03-10T14:24:28.146Z,1520691868.146 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-03-10T14:24:28.146Z,1520691868.146 [Default:CheckIn:D] Running Loop=1
2018-03-10T14:24:28.563Z,1520691868.563 [Default:CheckIn:D] Stopped
2018-03-10T14:24:28.563Z,1520691868.563 [Default:CheckIn:E] Running Loop=1
2018-03-10T14:24:28.928Z,1520691868.928 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 545.177214 min 
2018-03-10T14:24:28.928Z,1520691868.928 [Default:CheckIn:E] Stopped
2018-03-10T14:24:28.928Z,1520691868.928 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-03-10T14:24:28.928Z,1520691868.928 [Default:CheckIn] Stopped
2018-03-10T14:24:28.928Z,1520691868.928 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-03-10T14:24:28.929Z,1520691868.929 [Default:CheckIn](INFO): Running loop #54
2018-03-10T14:24:28.929Z,1520691868.929 [Default:CheckIn] Running Loop=54
2018-03-10T14:24:28.929Z,1520691868.929 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-03-10T14:24:28.929Z,1520691868.929 [Default:CheckIn:Read_GPS] Running Loop=1
2018-03-10T14:24:33.248Z,1520691873.248 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T14:24:33.248Z,1520691873.248 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 105
2018-03-10T14:24:33.248Z,1520691873.248 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-10T14:24:33.273Z,1520691873.273 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-10T14:24:33.307Z,1520691873.307 [NAL9602](INFO): Powering up
2018-03-10T14:24:33.404Z,1520691873.404 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-10T14:24:33.404Z,1520691873.404 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 105
2018-03-10T14:24:33.744Z,1520691873.744 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-10T14:24:33.744Z,1520691873.744 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-10T14:24:33.745Z,1520691873.745 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-10T14:24:44.500Z,1520691884.500 [NAL9602](INFO): NAL9602 initialized
2018-03-10T14:25:16.488Z,1520691916.488 [NAL9602](ERROR): Failed to receive proper response when querying signal strength for MT queue check.
2018-03-10T14:25:16.563Z,1520691916.563 [NAL9602](FAULT): received: 
+CSQ:0

OK35, 0, 0, 0, 0

OK
2018-03-10T14:25:16.563Z,1520691916.563 [NAL9602] Data Fault, FailCount= 4
2018-03-10T14:25:16.563Z,1520691916.563 [NAL9602](ERROR): Data Fault
2018-03-10T14:25:16.631Z,1520691916.631 [CBIT](ERROR): Data Fault in component: NAL9602
2018-03-10T14:25:16.908Z,1520691916.908 [NAL9602](INFO): Powering down
2018-03-10T14:25:17.744Z,1520691917.744 [CBIT](INFO): Clearing failed state for component NAL9602
2018-03-10T14:25:17.744Z,1520691917.744 [NAL9602] No Fault, FailCount= 4
2018-03-10T14:25:39.542Z,1520691939.542 [CBIT](DEBUG): EFC running - data check-sum false
2018-03-10T14:25:47.072Z,1520691947.072 [NAL9602](INFO): Powering up NAL9602
2018-03-10T14:25:58.260Z,1520691958.260 [NAL9602](INFO): NAL9602 initialized
2018-03-10T14:27:33.946Z,1520692053.946 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T14:27:33.951Z,1520692053.951 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 106
2018-03-10T14:27:33.951Z,1520692053.951 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-10T14:27:33.981Z,1520692053.981 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-10T14:27:34.367Z,1520692054.367 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-10T14:27:34.367Z,1520692054.367 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 106
2018-03-10T14:27:34.749Z,1520692054.749 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-10T14:27:34.749Z,1520692054.749 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-10T14:27:34.750Z,1520692054.750 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-10T14:29:02.841Z,1520692142.841 [BPC1](ERROR): Failed to receive battery data
2018-03-10T14:29:02.841Z,1520692142.841 [BPC1] Communications Fault, FailCount= 1
2018-03-10T14:29:02.841Z,1520692142.841 [BPC1](ERROR): Communications Fault
2018-03-10T14:29:02.869Z,1520692142.869 [CBIT](ERROR): Communications Fault in component: BPC1
2018-03-10T14:29:04.070Z,1520692144.070 [CBIT](INFO): Clearing failed state for component BPC1
2018-03-10T14:29:04.070Z,1520692144.070 [BPC1] No Fault, FailCount= 1
2018-03-10T14:29:29.253Z,1520692169.253 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-03-10T14:24:28.9Z
2018-03-10T14:29:29.254Z,1520692169.254 [Default:CheckIn:Read_GPS] Stopped
2018-03-10T14:29:29.254Z,1520692169.254 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-03-10T14:29:33.555Z,1520692173.555 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20180310T051512/Courier0216.lzma
2018-03-10T14:29:34.354Z,1520692174.354 [DataOverHttps](INFO): Moved sent file to Logs/20180310T051512/Courier0216.lzma.bak
2018-03-10T14:29:34.354Z,1520692174.354 [DataOverHttps](INFO): SBD MOMSN=8005360
2018-03-10T14:29:35.061Z,1520692175.061 [BPC1](FAULT): Failed to initialize
2018-03-10T14:29:35.061Z,1520692175.061 [BPC1] Communications Fault, FailCount= 2
2018-03-10T14:29:35.061Z,1520692175.061 [BPC1](ERROR): Communications Fault
2018-03-10T14:29:35.109Z,1520692175.109 [CBIT](ERROR): Communications Fault in component: BPC1
2018-03-10T14:29:38.937Z,1520692178.937 [CBIT](INFO): Clearing failed state for component BPC1
2018-03-10T14:29:38.937Z,1520692178.937 [BPC1] No Fault, FailCount= 2
2018-03-10T14:29:44.916Z,1520692184.916 [DataOverHttps](INFO): Sending 264 bytes from file Logs/20180310T051512/Express0217.lzma
2018-03-10T14:29:45.702Z,1520692185.702 [DataOverHttps](INFO): Moved sent file to Logs/20180310T051512/Express0217.lzma.bak
2018-03-10T14:29:45.702Z,1520692185.702 [DataOverHttps](INFO): SBD MOMSN=8005362
2018-03-10T14:29:46.764Z,1520692186.764 [Default:CheckIn:Read_Iridium] Stopped
2018-03-10T14:29:46.764Z,1520692186.764 [Default:CheckIn:C.Wait] Running Loop=1
2018-03-10T14:29:46.764Z,1520692186.764 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-03-10T14:29:51.845Z,1520692191.845 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session.
2018-03-10T14:30:09.211Z,1520692209.211 [BPC1](FAULT): Failed to initialize
2018-03-10T14:30:09.211Z,1520692209.211 [BPC1] Communications Fault, FailCount= 3
2018-03-10T14:30:09.211Z,1520692209.211 [BPC1](ERROR): Communications Fault
2018-03-10T14:30:09.233Z,1520692209.233 [CBIT](ERROR): Communications Fault in component: BPC1
2018-03-10T14:30:10.467Z,1520692210.467 [CBIT](INFO): Clearing failed state for component BPC1
2018-03-10T14:30:10.467Z,1520692210.467 [BPC1] No Fault, FailCount= 3
2018-03-10T14:30:21.988Z,1520692221.988 [NAL9602](INFO): Powering down
2018-03-10T14:30:34.833Z,1520692234.833 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T14:30:34.833Z,1520692234.833 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 107
2018-03-10T14:30:34.833Z,1520692234.833 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-10T14:30:34.858Z,1520692234.858 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-10T14:30:35.240Z,1520692235.240 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-10T14:30:35.240Z,1520692235.240 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 107
2018-03-10T14:30:35.637Z,1520692235.637 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-10T14:30:35.637Z,1520692235.637 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-10T14:30:35.637Z,1520692235.637 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-10T14:30:41.213Z,1520692241.213 [BPC1](FAULT): Failed to initialize
2018-03-10T14:30:41.213Z,1520692241.213 [BPC1] Communications Fault, FailCount= 4
2018-03-10T14:30:41.213Z,1520692241.213 [BPC1](ERROR): Communications Fault
2018-03-10T14:30:41.236Z,1520692241.236 [CBIT](ERROR): Communications Fault in component: BPC1
2018-03-10T14:30:42.443Z,1520692242.443 [CBIT](INFO): Clearing failed state for component BPC1
2018-03-10T14:30:42.443Z,1520692242.443 [BPC1] No Fault, FailCount= 4
2018-03-10T14:33:35.657Z,1520692415.657 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T14:33:35.657Z,1520692415.657 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 108
2018-03-10T14:33:35.657Z,1520692415.657 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-10T14:33:35.682Z,1520692415.682 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-10T14:33:36.078Z,1520692416.078 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-10T14:33:36.079Z,1520692416.079 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 108
2018-03-10T14:33:36.445Z,1520692416.445 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-10T14:33:36.446Z,1520692416.446 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-10T14:33:36.446Z,1520692416.446 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-10T14:34:47.328Z,1520692487.328 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-03-10T14:34:47.328Z,1520692487.328 [Default:CheckIn:C.Wait] Stopped
2018-03-10T14:34:47.328Z,1520692487.328 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-03-10T14:34:47.328Z,1520692487.328 [Default:CheckIn:D] Running Loop=1
2018-03-10T14:34:47.762Z,1520692487.762 [Default:CheckIn:D] Stopped
2018-03-10T14:34:47.762Z,1520692487.762 [Default:CheckIn:E] Running Loop=1
2018-03-10T14:34:50.973Z,1520692490.973 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 555.497331 min 
2018-03-10T14:34:50.973Z,1520692490.973 [Default:CheckIn:E] Stopped
2018-03-10T14:34:50.973Z,1520692490.973 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-03-10T14:34:50.973Z,1520692490.973 [Default:CheckIn] Stopped
2018-03-10T14:34:50.974Z,1520692490.974 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-03-10T14:34:50.974Z,1520692490.974 [Default:CheckIn](INFO): Running loop #55
2018-03-10T14:34:50.974Z,1520692490.974 [Default:CheckIn] Running Loop=55
2018-03-10T14:34:50.974Z,1520692490.974 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-03-10T14:34:50.974Z,1520692490.974 [Default:CheckIn:Read_GPS] Running Loop=1
2018-03-10T14:34:51.408Z,1520692491.408 [NAL9602](INFO): Powering up
2018-03-10T14:35:02.598Z,1520692502.598 [NAL9602](INFO): NAL9602 initialized
2018-03-10T14:35:03.412Z,1520692503.412 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-03-10T14:35:03.412Z,1520692503.412 [NAL9602] Data Fault, FailCount= 5
2018-03-10T14:35:03.412Z,1520692503.412 [NAL9602](ERROR): Data Fault
2018-03-10T14:35:03.492Z,1520692503.492 [CBIT](ERROR): Data Fault in component: NAL9602
2018-03-10T14:35:03.492Z,1520692503.492 [CBIT](CRITICAL): Data Fault in component: NAL9602
2018-03-10T14:35:03.800Z,1520692503.800 [NAL9602](INFO): Powering down
2018-03-10T14:35:03.875Z,1520692503.875 [CBIT](INFO): Critical error at 20180310T143503
2018-03-10T14:35:39.894Z,1520692539.894 [CBIT](DEBUG): EFC running - data check-sum false
2018-03-10T14:36:36.825Z,1520692596.825 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T14:36:36.825Z,1520692596.825 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 109
2018-03-10T14:36:36.825Z,1520692596.825 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-10T14:36:36.880Z,1520692596.880 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-10T14:36:37.242Z,1520692597.242 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-10T14:36:37.242Z,1520692597.242 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 109
2018-03-10T14:36:37.636Z,1520692597.636 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-10T14:36:37.636Z,1520692597.636 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-10T14:36:37.636Z,1520692597.636 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-10T14:37:03.701Z,1520692623.701 [CBIT](INFO): Clearing failed state for component NAL9602
2018-03-10T14:37:03.701Z,1520692623.701 [NAL9602] No Fault, FailCount= 5
2018-03-10T14:37:04.028Z,1520692624.028 [NAL9602](INFO): Powering up NAL9602
2018-03-10T14:37:15.228Z,1520692635.228 [NAL9602](INFO): NAL9602 initialized
2018-03-10T14:38:34.213Z,1520692714.213 [BPC1](ERROR): Failed to receive battery data
2018-03-10T14:38:34.213Z,1520692714.213 [BPC1] Communications Fault, FailCount= 1
2018-03-10T14:38:34.213Z,1520692714.213 [BPC1](ERROR): Communications Fault
2018-03-10T14:38:34.285Z,1520692714.285 [CBIT](ERROR): Communications Fault in component: BPC1
2018-03-10T14:38:35.453Z,1520692715.453 [CBIT](INFO): Clearing failed state for component BPC1
2018-03-10T14:38:35.454Z,1520692715.454 [BPC1] No Fault, FailCount= 1
2018-03-10T14:39:06.026Z,1520692746.026 [BPC1](FAULT): Failed to initialize
2018-03-10T14:39:06.026Z,1520692746.026 [BPC1] Communications Fault, FailCount= 2
2018-03-10T14:39:06.026Z,1520692746.026 [BPC1](ERROR): Communications Fault
2018-03-10T14:39:06.093Z,1520692746.093 [CBIT](ERROR): Communications Fault in component: BPC1
2018-03-10T14:39:07.279Z,1520692747.279 [CBIT](INFO): Clearing failed state for component BPC1
2018-03-10T14:39:07.279Z,1520692747.279 [BPC1] No Fault, FailCount= 2
2018-03-10T14:39:37.668Z,1520692777.668 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T14:39:37.668Z,1520692777.668 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 110
2018-03-10T14:39:37.669Z,1520692777.669 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-10T14:39:37.705Z,1520692777.705 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-10T14:39:38.048Z,1520692778.048 [BPC1](FAULT): Failed to initialize
2018-03-10T14:39:38.048Z,1520692778.048 [BPC1] Communications Fault, FailCount= 3
2018-03-10T14:39:38.048Z,1520692778.048 [BPC1](ERROR): Communications Fault
2018-03-10T14:39:38.069Z,1520692778.069 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-10T14:39:38.069Z,1520692778.069 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 110
2018-03-10T14:39:38.070Z,1520692778.070 [CBIT](ERROR): Communications Fault in component: BPC1
2018-03-10T14:39:38.460Z,1520692778.460 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-10T14:39:38.461Z,1520692778.461 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-10T14:39:38.461Z,1520692778.461 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-10T14:39:39.282Z,1520692779.282 [CBIT](INFO): Clearing failed state for component BPC1
2018-03-10T14:39:39.282Z,1520692779.282 [BPC1] No Fault, FailCount= 3
2018-03-10T14:39:54.092Z,1520692794.092 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-03-10T14:34:50.0Z
2018-03-10T14:39:54.093Z,1520692794.093 [Default:CheckIn:Read_GPS] Stopped
2018-03-10T14:39:54.093Z,1520692794.093 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-03-10T14:39:54.677Z,1520692794.677 [DataOverHttps](INFO): Sending 69 bytes from file Logs/20180310T051512/Courier0220.lzma
2018-03-10T14:39:55.337Z,1520692795.337 [DataOverHttps](INFO): Moved sent file to Logs/20180310T051512/Courier0220.lzma.bak
2018-03-10T14:39:55.338Z,1520692795.338 [DataOverHttps](INFO): SBD MOMSN=8005416
2018-03-10T14:40:05.475Z,1520692805.475 [DataOverHttps](INFO): Sending 257 bytes from file Logs/20180310T051512/Express0221.lzma
2018-03-10T14:40:06.274Z,1520692806.274 [DataOverHttps](INFO): Moved sent file to Logs/20180310T051512/Express0221.lzma.bak
2018-03-10T14:40:06.274Z,1520692806.274 [DataOverHttps](INFO): SBD MOMSN=8005419
2018-03-10T14:40:07.023Z,1520692807.023 [Default:CheckIn:Read_Iridium] Stopped
2018-03-10T14:40:07.023Z,1520692807.023 [Default:CheckIn:C.Wait] Running Loop=1
2018-03-10T14:40:07.024Z,1520692807.024 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-03-10T14:40:10.718Z,1520692810.718 [BPC1](FAULT): Failed to initialize
2018-03-10T14:40:10.718Z,1520692810.718 [BPC1] Communications Fault, FailCount= 4
2018-03-10T14:40:10.718Z,1520692810.718 [BPC1](ERROR): Communications Fault
2018-03-10T14:40:10.776Z,1520692810.776 [CBIT](ERROR): Communications Fault in component: BPC1
2018-03-10T14:40:11.695Z,1520692811.695 [CBIT](INFO): Clearing failed state for component BPC1
2018-03-10T14:40:11.695Z,1520692811.695 [BPC1] No Fault, FailCount= 4
2018-03-10T14:42:18.692Z,1520692938.692 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session.
2018-03-10T14:42:38.755Z,1520692958.755 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T14:42:38.755Z,1520692958.755 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 111
2018-03-10T14:42:38.755Z,1520692958.755 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-10T14:42:38.789Z,1520692958.789 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-10T14:42:39.197Z,1520692959.197 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-10T14:42:39.197Z,1520692959.197 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 111
2018-03-10T14:42:39.546Z,1520692959.546 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-10T14:42:39.546Z,1520692959.546 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-10T14:42:39.547Z,1520692959.547 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-10T14:42:49.097Z,1520692969.097 [NAL9602](INFO): Powering down
2018-03-10T14:45:07.437Z,1520693107.437 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-03-10T14:45:07.438Z,1520693107.438 [Default:CheckIn:C.Wait] Stopped
2018-03-10T14:45:07.438Z,1520693107.438 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-03-10T14:45:07.438Z,1520693107.438 [Default:CheckIn:D] Running Loop=1
2018-03-10T14:45:07.821Z,1520693107.821 [Default:CheckIn:D] Stopped
2018-03-10T14:45:07.821Z,1520693107.821 [Default:CheckIn:E] Running Loop=1
2018-03-10T14:45:08.225Z,1520693108.225 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 565.831706 min 
2018-03-10T14:45:08.225Z,1520693108.225 [Default:CheckIn:E] Stopped
2018-03-10T14:45:08.225Z,1520693108.225 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-03-10T14:45:08.225Z,1520693108.225 [Default:CheckIn] Stopped
2018-03-10T14:45:08.225Z,1520693108.225 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-03-10T14:45:08.225Z,1520693108.225 [Default:CheckIn](INFO): Running loop #56
2018-03-10T14:45:08.226Z,1520693108.226 [Default:CheckIn] Running Loop=56
2018-03-10T14:45:08.226Z,1520693108.226 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-03-10T14:45:08.226Z,1520693108.226 [Default:CheckIn:Read_GPS] Running Loop=1
2018-03-10T14:45:08.966Z,1520693108.966 [NAL9602](INFO): Powering up
2018-03-10T14:45:19.924Z,1520693119.924 [NAL9602](INFO): NAL9602 initialized
2018-03-10T14:45:39.587Z,1520693139.587 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T14:45:39.587Z,1520693139.587 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 112
2018-03-10T14:45:39.587Z,1520693139.587 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-10T14:45:39.645Z,1520693139.645 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-10T14:45:39.982Z,1520693139.982 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-10T14:45:39.982Z,1520693139.982 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 112
2018-03-10T14:45:39.983Z,1520693139.983 [CBIT](DEBUG): EFC running - data check-sum false
2018-03-10T14:45:40.373Z,1520693140.373 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-10T14:45:40.374Z,1520693140.374 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-10T14:45:40.374Z,1520693140.374 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-10T14:45:51.910Z,1520693151.910 [NAL9602](ERROR): Failed to receive proper response when querying signal strength for MT queue check.
2018-03-10T14:45:51.987Z,1520693151.987 [NAL9602](FAULT): received: 
+CSQ:0

OK35, 0, 0, 0, 0

OK
2018-03-10T14:45:51.987Z,1520693151.987 [NAL9602] Data Fault, FailCount= 1
2018-03-10T14:45:51.987Z,1520693151.987 [NAL9602](ERROR): Data Fault
2018-03-10T14:45:52.080Z,1520693152.080 [CBIT](ERROR): Data Fault in component: NAL9602
2018-03-10T14:45:52.341Z,1520693152.341 [NAL9602](INFO): Powering down
2018-03-10T14:45:53.199Z,1520693153.199 [CBIT](INFO): Clearing failed state for component NAL9602
2018-03-10T14:45:53.199Z,1520693153.199 [NAL9602] No Fault, FailCount= 1
2018-03-10T14:46:22.368Z,1520693182.368 [NAL9602](INFO): Powering up NAL9602
2018-03-10T14:46:33.572Z,1520693193.572 [NAL9602](INFO): NAL9602 initialized
2018-03-10T14:48:19.842Z,1520693299.842 [BPC1](ERROR): Failed to receive battery data
2018-03-10T14:48:19.842Z,1520693299.842 [BPC1] Communications Fault, FailCount= 1
2018-03-10T14:48:19.842Z,1520693299.842 [BPC1](ERROR): Communications Fault
2018-03-10T14:48:19.865Z,1520693299.865 [CBIT](ERROR): Communications Fault in component: BPC1
2018-03-10T14:48:21.101Z,1520693301.101 [CBIT](INFO): Clearing failed state for component BPC1
2018-03-10T14:48:21.101Z,1520693301.101 [BPC1] No Fault, FailCount= 1
2018-03-10T14:48:40.656Z,1520693320.656 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T14:48:40.656Z,1520693320.656 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 113
2018-03-10T14:48:40.656Z,1520693320.656 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-10T14:48:40.668Z,1520693320.668 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-10T14:48:41.066Z,1520693321.066 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-10T14:48:41.066Z,1520693321.066 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 113
2018-03-10T14:48:41.458Z,1520693321.458 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-10T14:48:41.458Z,1520693321.458 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-10T14:48:41.458Z,1520693321.458 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-10T14:48:51.838Z,1520693331.838 [BPC1](FAULT): Failed to initialize
2018-03-10T14:48:51.838Z,1520693331.838 [BPC1] Communications Fault, FailCount= 2
2018-03-10T14:48:51.838Z,1520693331.838 [BPC1](ERROR): Communications Fault
2018-03-10T14:48:51.886Z,1520693331.886 [CBIT](ERROR): Communications Fault in component: BPC1
2018-03-10T14:48:53.067Z,1520693333.067 [CBIT](INFO): Clearing failed state for component BPC1
2018-03-10T14:48:53.067Z,1520693333.067 [BPC1] No Fault, FailCount= 2
2018-03-10T14:49:23.584Z,1520693363.584 [BPC1](FAULT): Failed to initialize
2018-03-10T14:49:23.585Z,1520693363.585 [BPC1] Communications Fault, FailCount= 3
2018-03-10T14:49:23.585Z,1520693363.585 [BPC1](ERROR): Communications Fault
2018-03-10T14:49:23.659Z,1520693363.659 [CBIT](ERROR): Communications Fault in component: BPC1
2018-03-10T14:49:24.826Z,1520693364.826 [CBIT](INFO): Clearing failed state for component BPC1
2018-03-10T14:49:24.826Z,1520693364.826 [BPC1] No Fault, FailCount= 3
2018-03-10T14:49:55.594Z,1520693395.594 [BPC1](FAULT): Failed to initialize
2018-03-10T14:49:55.594Z,1520693395.594 [BPC1] Communications Fault, FailCount= 4
2018-03-10T14:49:55.594Z,1520693395.594 [BPC1](ERROR): Communications Fault
2018-03-10T14:49:55.624Z,1520693395.624 [CBIT](ERROR): Communications Fault in component: BPC1
2018-03-10T14:49:56.820Z,1520693396.820 [CBIT](INFO): Clearing failed state for component BPC1
2018-03-10T14:49:56.820Z,1520693396.820 [BPC1] No Fault, FailCount= 4
2018-03-10T14:50:08.430Z,1520693408.430 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-03-10T14:45:08.2Z
2018-03-10T14:50:08.430Z,1520693408.430 [Default:CheckIn:Read_GPS] Stopped
2018-03-10T14:50:08.430Z,1520693408.430 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-03-10T14:50:13.630Z,1520693413.630 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20180310T051512/Courier0224.lzma
2018-03-10T14:50:14.430Z,1520693414.430 [DataOverHttps](INFO): Moved sent file to Logs/20180310T051512/Courier0224.lzma.bak
2018-03-10T14:50:14.430Z,1520693414.430 [DataOverHttps](INFO): SBD MOMSN=8005485
2018-03-10T14:50:24.252Z,1520693424.252 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session.
2018-03-10T14:50:24.770Z,1520693424.770 [DataOverHttps](INFO): Sending 273 bytes from file Logs/20180310T051512/Express0225.lzma
2018-03-10T14:50:25.573Z,1520693425.573 [DataOverHttps](INFO): Moved sent file to Logs/20180310T051512/Express0225.lzma.bak
2018-03-10T14:50:25.574Z,1520693425.574 [DataOverHttps](INFO): SBD MOMSN=8005487
2018-03-10T14:50:26.346Z,1520693426.346 [Default:CheckIn:Read_Iridium] Stopped
2018-03-10T14:50:26.347Z,1520693426.347 [Default:CheckIn:C.Wait] Running Loop=1
2018-03-10T14:50:26.347Z,1520693426.347 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-03-10T14:50:54.517Z,1520693454.517 [NAL9602](INFO): Powering down
2018-03-10T14:51:41.534Z,1520693501.534 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T14:51:41.534Z,1520693501.534 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 114
2018-03-10T14:51:41.534Z,1520693501.534 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-10T14:51:41.559Z,1520693501.559 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-10T14:51:41.972Z,1520693501.972 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-10T14:51:41.972Z,1520693501.972 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 114
2018-03-10T14:51:42.369Z,1520693502.369 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-10T14:51:42.370Z,1520693502.370 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-10T14:51:42.370Z,1520693502.370 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-10T14:54:42.671Z,1520693682.671 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T14:54:42.671Z,1520693682.671 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 115
2018-03-10T14:54:42.671Z,1520693682.671 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-10T14:54:42.724Z,1520693682.724 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-10T14:54:43.103Z,1520693683.103 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-10T14:54:43.103Z,1520693683.103 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 115
2018-03-10T14:54:43.495Z,1520693683.495 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-10T14:54:43.495Z,1520693683.495 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-10T14:54:43.496Z,1520693683.496 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-10T14:55:26.681Z,1520693726.681 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-03-10T14:55:26.681Z,1520693726.681 [Default:CheckIn:C.Wait] Stopped
2018-03-10T14:55:26.681Z,1520693726.681 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-03-10T14:55:26.681Z,1520693726.681 [Default:CheckIn:D] Running Loop=1
2018-03-10T14:55:27.084Z,1520693727.084 [Default:CheckIn:D] Stopped
2018-03-10T14:55:27.084Z,1520693727.084 [Default:CheckIn:E] Running Loop=1
2018-03-10T14:55:27.494Z,1520693727.494 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 576.152734 min 
2018-03-10T14:55:27.494Z,1520693727.494 [Default:CheckIn:E] Stopped
2018-03-10T14:55:27.494Z,1520693727.494 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-03-10T14:55:27.494Z,1520693727.494 [Default:CheckIn] Stopped
2018-03-10T14:55:27.495Z,1520693727.495 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-03-10T14:55:27.495Z,1520693727.495 [Default:CheckIn](INFO): Running loop #57
2018-03-10T14:55:27.495Z,1520693727.495 [Default:CheckIn] Running Loop=57
2018-03-10T14:55:27.495Z,1520693727.495 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-03-10T14:55:27.495Z,1520693727.495 [Default:CheckIn:Read_GPS] Running Loop=1
2018-03-10T14:55:30.795Z,1520693730.795 [NAL9602](INFO): Powering up
2018-03-10T14:55:40.058Z,1520693740.058 [CBIT](DEBUG): EFC running - data check-sum false
2018-03-10T14:55:41.608Z,1520693741.608 [NAL9602](INFO): NAL9602 initialized
2018-03-10T14:55:42.404Z,1520693742.404 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-03-10T14:55:42.404Z,1520693742.404 [NAL9602] Data Fault, FailCount= 2
2018-03-10T14:55:42.404Z,1520693742.404 [NAL9602](ERROR): Data Fault
2018-03-10T14:55:42.486Z,1520693742.486 [CBIT](ERROR): Data Fault in component: NAL9602
2018-03-10T14:55:42.804Z,1520693742.804 [NAL9602](INFO): Powering down
2018-03-10T14:55:43.664Z,1520693743.664 [CBIT](INFO): Clearing failed state for component NAL9602
2018-03-10T14:55:43.664Z,1520693743.664 [NAL9602] No Fault, FailCount= 2
2018-03-10T14:56:12.812Z,1520693772.812 [NAL9602](INFO): Powering up NAL9602
2018-03-10T14:56:24.004Z,1520693784.004 [NAL9602](INFO): NAL9602 initialized
2018-03-10T14:57:43.849Z,1520693863.849 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T14:57:43.849Z,1520693863.849 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 116
2018-03-10T14:57:43.849Z,1520693863.849 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-10T14:57:43.886Z,1520693863.886 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-10T14:57:44.271Z,1520693864.271 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-10T14:57:44.271Z,1520693864.271 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 116
2018-03-10T14:57:44.645Z,1520693864.645 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-10T14:57:44.646Z,1520693864.646 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-10T14:57:44.646Z,1520693864.646 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-10T14:58:01.032Z,1520693881.032 [BPC1](ERROR): Failed to receive battery data
2018-03-10T14:58:01.032Z,1520693881.032 [BPC1] Communications Fault, FailCount= 1
2018-03-10T14:58:01.033Z,1520693881.033 [BPC1](ERROR): Communications Fault
2018-03-10T14:58:01.055Z,1520693881.055 [CBIT](ERROR): Communications Fault in component: BPC1
2018-03-10T14:58:02.273Z,1520693882.273 [CBIT](INFO): Clearing failed state for component BPC1
2018-03-10T14:58:02.273Z,1520693882.273 [BPC1] No Fault, FailCount= 1
2018-03-10T14:58:32.743Z,1520693912.743 [BPC1](FAULT): Failed to initialize
2018-03-10T14:58:32.743Z,1520693912.743 [BPC1] Communications Fault, FailCount= 2
2018-03-10T14:58:32.744Z,1520693912.744 [BPC1](ERROR): Communications Fault
2018-03-10T14:58:32.801Z,1520693912.801 [CBIT](ERROR): Communications Fault in component: BPC1
2018-03-10T14:58:33.988Z,1520693913.988 [CBIT](INFO): Clearing failed state for component BPC1
2018-03-10T14:58:33.988Z,1520693913.988 [BPC1] No Fault, FailCount= 2
2018-03-10T14:59:04.739Z,1520693944.739 [BPC1](FAULT): Failed to initialize
2018-03-10T14:59:04.739Z,1520693944.739 [BPC1] Communications Fault, FailCount= 3
2018-03-10T14:59:04.739Z,1520693944.739 [BPC1](ERROR): Communications Fault
2018-03-10T14:59:04.771Z,1520693944.771 [CBIT](ERROR): Communications Fault in component: BPC1
2018-03-10T14:59:05.961Z,1520693945.961 [CBIT](INFO): Clearing failed state for component BPC1
2018-03-10T14:59:05.961Z,1520693945.961 [BPC1] No Fault, FailCount= 3
2018-03-10T14:59:36.576Z,1520693976.576 [BPC1](FAULT): Failed to initialize
2018-03-10T14:59:36.576Z,1520693976.576 [BPC1] Communications Fault, FailCount= 4
2018-03-10T14:59:36.576Z,1520693976.576 [BPC1](ERROR): Communications Fault
2018-03-10T14:59:36.636Z,1520693976.636 [CBIT](ERROR): Communications Fault in component: BPC1
2018-03-10T14:59:37.793Z,1520693977.793 [CBIT](INFO): Clearing failed state for component BPC1
2018-03-10T14:59:37.793Z,1520693977.793 [BPC1] No Fault, FailCount= 4
2018-03-10T15:00:27.778Z,1520694027.778 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-03-10T14:55:27.5Z
2018-03-10T15:00:27.778Z,1520694027.778 [Default:CheckIn:Read_GPS] Stopped
2018-03-10T15:00:27.778Z,1520694027.778 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-03-10T15:00:31.915Z,1520694031.915 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20180310T051512/Courier0228.lzma
2018-03-10T15:00:32.742Z,1520694032.742 [DataOverHttps](INFO): Moved sent file to Logs/20180310T051512/Courier0228.lzma.bak
2018-03-10T15:00:32.742Z,1520694032.742 [DataOverHttps](INFO): SBD MOMSN=8005547
2018-03-10T15:00:44.180Z,1520694044.180 [DataOverHttps](INFO): Sending 245 bytes from file Logs/20180310T051512/Express0229.lzma
2018-03-10T15:00:44.977Z,1520694044.977 [DataOverHttps](INFO): Moved sent file to Logs/20180310T051512/Express0229.lzma.bak
2018-03-10T15:00:44.978Z,1520694044.978 [DataOverHttps](INFO): SBD MOMSN=8005549
2018-03-10T15:00:45.056Z,1520694045.056 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T15:00:45.056Z,1520694045.056 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 117
2018-03-10T15:00:45.056Z,1520694045.056 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-10T15:00:45.077Z,1520694045.077 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-10T15:00:45.825Z,1520694045.825 [Default:CheckIn:Read_Iridium] Stopped
2018-03-10T15:00:45.825Z,1520694045.825 [Default:CheckIn:C.Wait] Running Loop=1
2018-03-10T15:00:45.825Z,1520694045.825 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-03-10T15:00:45.836Z,1520694045.836 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-10T15:00:45.836Z,1520694045.836 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 117
2018-03-10T15:00:46.012Z,1520694046.012 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-10T15:00:46.012Z,1520694046.012 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-10T15:00:46.012Z,1520694046.012 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-10T15:00:54.880Z,1520694054.880 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:00:55.268Z,1520694055.268 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:00:55.656Z,1520694055.656 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:00:56.056Z,1520694056.056 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:00:56.461Z,1520694056.461 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:00:56.857Z,1520694056.857 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:00:57.264Z,1520694057.264 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:00:57.661Z,1520694057.661 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:00:58.065Z,1520694058.065 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:00:58.465Z,1520694058.465 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:00:58.866Z,1520694058.866 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:00:59.283Z,1520694059.283 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:00:59.675Z,1520694059.675 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:01:00.076Z,1520694060.076 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:01:00.474Z,1520694060.474 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:01:00.865Z,1520694060.865 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:01:01.268Z,1520694061.268 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:01:01.663Z,1520694061.663 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:01:02.061Z,1520694062.061 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:01:02.461Z,1520694062.461 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:01:02.868Z,1520694062.868 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:01:21.276Z,1520694081.276 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:01:21.652Z,1520694081.652 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:01:22.070Z,1520694082.070 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:01:22.466Z,1520694082.466 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:01:22.864Z,1520694082.864 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:01:23.264Z,1520694083.264 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:01:23.664Z,1520694083.664 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:01:24.065Z,1520694084.065 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:01:24.464Z,1520694084.464 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:01:24.865Z,1520694084.865 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:01:25.287Z,1520694085.287 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:01:25.670Z,1520694085.670 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:01:26.084Z,1520694086.084 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:01:26.472Z,1520694086.472 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:01:26.864Z,1520694086.864 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:01:27.236Z,1520694087.236 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session.
2018-03-10T15:01:27.253Z,1520694087.253 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:01:27.663Z,1520694087.663 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:01:28.068Z,1520694088.068 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:01:28.456Z,1520694088.456 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:01:28.854Z,1520694088.854 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:01:29.256Z,1520694089.256 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:01:29.656Z,1520694089.656 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:01:30.060Z,1520694090.060 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:01:30.456Z,1520694090.456 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:01:30.860Z,1520694090.860 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:01:31.256Z,1520694091.256 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:01:31.656Z,1520694091.656 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:01:32.052Z,1520694092.052 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:01:32.450Z,1520694092.450 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:01:32.856Z,1520694092.856 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:01:33.260Z,1520694093.260 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:01:33.650Z,1520694093.650 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:01:34.063Z,1520694094.063 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:01:34.461Z,1520694094.461 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:01:34.864Z,1520694094.864 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:01:35.264Z,1520694095.264 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:01:35.661Z,1520694095.661 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:01:36.065Z,1520694096.065 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:01:36.464Z,1520694096.464 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:01:36.865Z,1520694096.865 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:01:37.265Z,1520694097.265 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:01:37.664Z,1520694097.664 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:01:38.060Z,1520694098.060 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:01:38.465Z,1520694098.465 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:01:38.864Z,1520694098.864 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:01:39.263Z,1520694099.263 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:01:39.667Z,1520694099.667 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:01:40.062Z,1520694100.062 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:01:40.468Z,1520694100.468 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:01:40.852Z,1520694100.852 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:01:41.268Z,1520694101.268 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:01:41.664Z,1520694101.664 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:01:42.064Z,1520694102.064 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:01:42.460Z,1520694102.460 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:01:42.860Z,1520694102.860 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:01:43.265Z,1520694103.265 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:01:43.665Z,1520694103.665 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:01:44.065Z,1520694104.065 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:01:44.452Z,1520694104.452 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:01:44.860Z,1520694104.860 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:01:45.263Z,1520694105.263 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:01:45.652Z,1520694105.652 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:01:46.064Z,1520694106.064 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:01:46.464Z,1520694106.464 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:01:49.603Z,1520694109.603 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:01:49.728Z,1520694109.728 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:01:50.084Z,1520694110.084 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:01:50.484Z,1520694110.484 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:01:50.885Z,1520694110.885 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:01:51.284Z,1520694111.284 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:01:51.684Z,1520694111.684 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:01:52.085Z,1520694112.085 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:01:52.484Z,1520694112.484 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:01:52.880Z,1520694112.880 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:01:53.285Z,1520694113.285 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:01:53.681Z,1520694113.681 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:01:54.081Z,1520694114.081 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:01:54.479Z,1520694114.479 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:01:54.884Z,1520694114.884 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:01:55.279Z,1520694115.279 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:01:55.681Z,1520694115.681 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:01:56.082Z,1520694116.082 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:01:56.480Z,1520694116.480 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:01:56.886Z,1520694116.886 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:01:57.294Z,1520694117.294 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:01:57.656Z,1520694117.656 [NAL9602](INFO): Powering down
2018-03-10T15:01:57.694Z,1520694117.694 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:01:58.081Z,1520694118.081 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:01:58.484Z,1520694118.484 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:01:58.886Z,1520694118.886 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:01:59.276Z,1520694119.276 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:01:59.676Z,1520694119.676 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:02:00.080Z,1520694120.080 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:02:00.477Z,1520694120.477 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:02:00.882Z,1520694120.882 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:02:01.277Z,1520694121.277 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:02:01.681Z,1520694121.681 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:02:02.077Z,1520694122.077 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:02:02.481Z,1520694122.481 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:02:02.877Z,1520694122.877 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:02:03.282Z,1520694123.282 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:02:03.682Z,1520694123.682 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:02:04.084Z,1520694124.084 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:02:04.494Z,1520694124.494 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:02:04.884Z,1520694124.884 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:02:05.283Z,1520694125.283 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:02:05.685Z,1520694125.685 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:02:06.081Z,1520694126.081 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:02:06.482Z,1520694126.482 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:02:06.884Z,1520694126.884 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:02:07.288Z,1520694127.288 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:02:07.676Z,1520694127.676 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:02:08.080Z,1520694128.080 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:02:08.488Z,1520694128.488 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:02:08.888Z,1520694128.888 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:02:09.279Z,1520694129.279 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:02:09.684Z,1520694129.684 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:02:10.080Z,1520694130.080 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:02:10.483Z,1520694130.483 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:02:10.876Z,1520694130.876 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:02:11.276Z,1520694131.276 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:02:11.696Z,1520694131.696 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:02:12.076Z,1520694132.076 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:02:12.480Z,1520694132.480 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:02:12.875Z,1520694132.875 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:02:13.277Z,1520694133.277 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:02:13.679Z,1520694133.679 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:02:14.076Z,1520694134.076 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:02:14.472Z,1520694134.472 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:02:14.880Z,1520694134.880 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:02:15.272Z,1520694135.272 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:02:15.680Z,1520694135.680 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:02:16.096Z,1520694136.096 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:02:16.496Z,1520694136.496 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:02:16.881Z,1520694136.881 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:02:17.280Z,1520694137.280 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:02:17.676Z,1520694137.676 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:02:18.084Z,1520694138.084 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:02:18.480Z,1520694138.480 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:02:18.876Z,1520694138.876 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:02:19.279Z,1520694139.279 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:02:19.676Z,1520694139.676 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:02:20.077Z,1520694140.077 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:02:20.480Z,1520694140.480 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:02:20.880Z,1520694140.880 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:02:21.283Z,1520694141.283 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:02:21.677Z,1520694141.677 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:02:22.081Z,1520694142.081 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:02:22.485Z,1520694142.485 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:02:22.884Z,1520694142.884 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:02:23.283Z,1520694143.283 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:02:23.692Z,1520694143.692 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:02:24.084Z,1520694144.084 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:02:24.485Z,1520694144.485 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:02:24.885Z,1520694144.885 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:02:25.285Z,1520694145.285 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:02:25.680Z,1520694145.680 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:02:26.088Z,1520694146.088 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:02:26.484Z,1520694146.484 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:02:26.889Z,1520694146.889 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:02:27.284Z,1520694147.284 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:02:27.678Z,1520694147.678 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:02:28.081Z,1520694148.081 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:02:28.479Z,1520694148.479 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:02:28.884Z,1520694148.884 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:02:29.284Z,1520694149.284 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:02:29.685Z,1520694149.685 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:02:30.083Z,1520694150.083 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:02:30.484Z,1520694150.484 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:02:30.892Z,1520694150.892 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:02:31.280Z,1520694151.280 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:02:31.690Z,1520694151.690 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:02:32.085Z,1520694152.085 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:02:32.480Z,1520694152.480 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:02:32.872Z,1520694152.872 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:02:33.289Z,1520694153.289 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:02:33.674Z,1520694153.674 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:02:34.077Z,1520694154.077 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:02:34.477Z,1520694154.477 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:02:34.877Z,1520694154.877 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:02:35.277Z,1520694155.277 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:02:35.698Z,1520694155.698 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:02:36.072Z,1520694156.072 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:02:36.472Z,1520694156.472 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:02:36.876Z,1520694156.876 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:02:37.273Z,1520694157.273 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:02:37.672Z,1520694157.672 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:02:38.080Z,1520694158.080 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:02:38.480Z,1520694158.480 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:02:38.880Z,1520694158.880 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:02:39.284Z,1520694159.284 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:02:39.684Z,1520694159.684 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:02:40.078Z,1520694160.078 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:02:40.481Z,1520694160.481 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:02:40.885Z,1520694160.885 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:02:41.285Z,1520694161.285 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:02:41.684Z,1520694161.684 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:02:42.094Z,1520694162.094 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:02:42.485Z,1520694162.485 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:02:42.882Z,1520694162.882 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:02:43.284Z,1520694163.284 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:02:43.682Z,1520694163.682 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:02:44.084Z,1520694164.084 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:02:44.488Z,1520694164.488 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:02:44.884Z,1520694164.884 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:02:45.285Z,1520694165.285 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:02:45.676Z,1520694165.676 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:02:46.073Z,1520694166.073 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:02:46.476Z,1520694166.476 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:02:49.735Z,1520694169.735 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:02:49.851Z,1520694169.851 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:02:50.212Z,1520694170.212 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:02:50.609Z,1520694170.609 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:02:51.010Z,1520694171.010 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:02:51.416Z,1520694171.416 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:02:51.812Z,1520694171.812 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:02:52.204Z,1520694172.204 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:02:52.610Z,1520694172.610 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:02:53.006Z,1520694173.006 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:02:53.412Z,1520694173.412 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:02:53.808Z,1520694173.808 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:02:54.200Z,1520694174.200 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:02:54.608Z,1520694174.608 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:02:55.006Z,1520694175.006 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:02:55.401Z,1520694175.401 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:02:55.800Z,1520694175.800 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:02:56.200Z,1520694176.200 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:02:56.596Z,1520694176.596 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:02:57.000Z,1520694177.000 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:02:57.400Z,1520694177.400 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:02:57.804Z,1520694177.804 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:02:58.209Z,1520694178.209 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:02:58.607Z,1520694178.607 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:03:24.206Z,1520694204.206 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:03:24.609Z,1520694204.609 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:03:25.010Z,1520694205.010 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:03:25.404Z,1520694205.404 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:03:25.804Z,1520694205.804 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:03:26.206Z,1520694206.206 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:03:26.604Z,1520694206.604 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:03:27.004Z,1520694207.004 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:03:27.416Z,1520694207.416 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:03:27.808Z,1520694207.808 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:03:28.212Z,1520694208.212 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:03:28.618Z,1520694208.618 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:03:28.997Z,1520694208.997 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:03:29.413Z,1520694209.413 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:03:29.821Z,1520694209.821 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:03:31.417Z,1520694211.417 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:03:31.804Z,1520694211.804 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:03:32.204Z,1520694212.204 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:03:32.600Z,1520694212.600 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:03:33.006Z,1520694213.006 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:03:33.404Z,1520694213.404 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:03:33.800Z,1520694213.800 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:03:34.200Z,1520694214.200 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:03:34.620Z,1520694214.620 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:03:36.196Z,1520694216.196 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:03:36.596Z,1520694216.596 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:03:37.004Z,1520694217.004 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:03:37.396Z,1520694217.396 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:03:37.797Z,1520694217.797 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:03:38.204Z,1520694218.204 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:03:38.596Z,1520694218.596 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:03:38.996Z,1520694218.996 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:03:39.412Z,1520694219.412 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:03:39.796Z,1520694219.796 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:03:40.200Z,1520694220.200 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:03:40.621Z,1520694220.621 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:03:40.996Z,1520694220.996 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:03:41.400Z,1520694221.400 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:03:41.820Z,1520694221.820 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:03:42.212Z,1520694222.212 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:03:42.602Z,1520694222.602 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:03:43.004Z,1520694223.004 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:03:43.400Z,1520694223.400 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:03:43.796Z,1520694223.796 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:03:44.200Z,1520694224.200 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:03:44.596Z,1520694224.596 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:03:45.004Z,1520694225.004 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:03:45.416Z,1520694225.416 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:03:45.796Z,1520694225.796 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:03:46.196Z,1520694226.196 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:03:46.231Z,1520694226.231 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T15:03:46.231Z,1520694226.231 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 118
2018-03-10T15:03:46.231Z,1520694226.231 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-10T15:03:46.252Z,1520694226.252 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-10T15:03:46.600Z,1520694226.600 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:03:46.649Z,1520694226.649 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-10T15:03:46.649Z,1520694226.649 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 118
2018-03-10T15:03:49.846Z,1520694229.846 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:03:49.892Z,1520694229.892 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-10T15:03:49.893Z,1520694229.893 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-10T15:03:49.893Z,1520694229.893 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-10T15:03:49.992Z,1520694229.992 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:03:50.358Z,1520694230.358 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:03:50.752Z,1520694230.752 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:03:51.148Z,1520694231.148 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:03:51.548Z,1520694231.548 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:03:51.947Z,1520694231.947 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:03:52.346Z,1520694232.346 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:03:52.773Z,1520694232.773 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:03:53.167Z,1520694233.167 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:03:53.554Z,1520694233.554 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:03:53.961Z,1520694233.961 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:03:54.373Z,1520694234.373 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:03:54.774Z,1520694234.774 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:03:55.162Z,1520694235.162 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:03:55.556Z,1520694235.556 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:03:55.949Z,1520694235.949 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:03:56.359Z,1520694236.359 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:03:56.758Z,1520694236.758 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:03:57.144Z,1520694237.144 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:03:57.557Z,1520694237.557 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:03:57.953Z,1520694237.953 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:03:58.340Z,1520694238.340 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:03:58.736Z,1520694238.736 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:03:59.138Z,1520694239.138 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:03:59.538Z,1520694239.538 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:03:59.981Z,1520694239.981 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:04:00.368Z,1520694240.368 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:04:00.756Z,1520694240.756 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:04:01.166Z,1520694241.166 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:04:01.571Z,1520694241.571 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:04:01.967Z,1520694241.967 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:04:02.339Z,1520694242.339 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:04:02.766Z,1520694242.766 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:04:03.172Z,1520694243.172 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:04:03.552Z,1520694243.552 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:04:03.952Z,1520694243.952 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:04:04.342Z,1520694244.342 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:04:04.754Z,1520694244.754 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:04:05.150Z,1520694245.150 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:04:05.545Z,1520694245.545 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:04:05.936Z,1520694245.936 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:04:06.342Z,1520694246.342 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:04:06.737Z,1520694246.737 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:04:07.166Z,1520694247.166 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:04:07.562Z,1520694247.562 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:04:07.957Z,1520694247.957 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:04:08.361Z,1520694248.361 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:04:08.765Z,1520694248.765 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:04:09.144Z,1520694249.144 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:04:09.568Z,1520694249.568 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:04:09.951Z,1520694249.951 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:04:10.355Z,1520694250.355 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:04:10.770Z,1520694250.770 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:04:11.156Z,1520694251.156 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:04:11.552Z,1520694251.552 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:04:11.955Z,1520694251.955 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:04:12.353Z,1520694252.353 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:04:12.758Z,1520694252.758 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:04:13.157Z,1520694253.157 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:04:13.548Z,1520694253.548 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:04:13.951Z,1520694253.951 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:04:14.356Z,1520694254.356 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:04:14.767Z,1520694254.767 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:04:15.167Z,1520694255.167 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:04:15.564Z,1520694255.564 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:04:15.965Z,1520694255.965 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:04:16.370Z,1520694256.370 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:04:16.770Z,1520694256.770 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:04:17.137Z,1520694257.137 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:04:17.557Z,1520694257.557 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:04:17.970Z,1520694257.970 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:04:18.357Z,1520694258.357 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:04:18.759Z,1520694258.759 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:04:19.144Z,1520694259.144 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:04:19.545Z,1520694259.545 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:04:19.957Z,1520694259.957 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:04:20.362Z,1520694260.362 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:04:21.976Z,1520694261.976 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:04:22.373Z,1520694262.373 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:04:22.741Z,1520694262.741 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:04:23.162Z,1520694263.162 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:04:23.574Z,1520694263.574 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:04:23.972Z,1520694263.972 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:04:24.345Z,1520694264.345 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:04:24.757Z,1520694264.757 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:04:25.171Z,1520694265.171 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:04:25.553Z,1520694265.553 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:04:25.945Z,1520694265.945 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:04:26.342Z,1520694266.342 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:04:26.748Z,1520694266.748 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:04:27.147Z,1520694267.147 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:04:27.545Z,1520694267.545 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:04:27.943Z,1520694267.943 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:04:28.346Z,1520694268.346 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:04:28.749Z,1520694268.749 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:04:29.168Z,1520694269.168 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:04:29.575Z,1520694269.575 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:04:29.957Z,1520694269.957 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:04:30.371Z,1520694270.371 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:04:30.773Z,1520694270.773 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:04:31.161Z,1520694271.161 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:04:31.567Z,1520694271.567 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:04:31.946Z,1520694271.946 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:04:32.361Z,1520694272.361 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:04:50.812Z,1520694290.812 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:04:51.220Z,1520694291.220 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:04:51.616Z,1520694291.616 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:04:52.012Z,1520694292.012 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:04:52.416Z,1520694292.416 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:04:52.823Z,1520694292.823 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:04:53.206Z,1520694293.206 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:04:53.605Z,1520694293.605 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:04:54.005Z,1520694294.005 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:05:40.083Z,1520694340.083 [CBIT](DEBUG): EFC running - data check-sum false
2018-03-10T15:05:46.038Z,1520694346.038 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-03-10T15:05:46.039Z,1520694346.039 [Default:CheckIn:C.Wait] Stopped
2018-03-10T15:05:46.039Z,1520694346.039 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-03-10T15:05:46.039Z,1520694346.039 [Default:CheckIn:D] Running Loop=1
2018-03-10T15:05:46.431Z,1520694346.431 [Default:CheckIn:D] Stopped
2018-03-10T15:05:46.431Z,1520694346.431 [Default:CheckIn:E] Running Loop=1
2018-03-10T15:05:46.895Z,1520694346.895 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 586.475195 min 
2018-03-10T15:05:46.895Z,1520694346.895 [Default:CheckIn:E] Stopped
2018-03-10T15:05:46.895Z,1520694346.895 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-03-10T15:05:46.895Z,1520694346.895 [Default:CheckIn] Stopped
2018-03-10T15:05:46.896Z,1520694346.896 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-03-10T15:05:46.896Z,1520694346.896 [Default:CheckIn](INFO): Running loop #58
2018-03-10T15:05:46.896Z,1520694346.896 [Default:CheckIn] Running Loop=58
2018-03-10T15:05:46.896Z,1520694346.896 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-03-10T15:05:46.896Z,1520694346.896 [Default:CheckIn:Read_GPS] Running Loop=1
2018-03-10T15:05:51.752Z,1520694351.752 [NAL9602](INFO): Powering up
2018-03-10T15:06:02.916Z,1520694362.916 [NAL9602](INFO): NAL9602 initialized
2018-03-10T15:06:18.940Z,1520694378.940 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:06:19.345Z,1520694379.345 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:06:19.741Z,1520694379.741 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:06:20.137Z,1520694380.137 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:06:20.537Z,1520694380.537 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:06:20.953Z,1520694380.953 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:06:21.341Z,1520694381.341 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:06:21.746Z,1520694381.746 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:06:22.153Z,1520694382.153 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:06:22.542Z,1520694382.542 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:06:22.943Z,1520694382.943 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:06:23.353Z,1520694383.353 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:06:23.728Z,1520694383.728 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:06:24.146Z,1520694384.146 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:06:24.545Z,1520694384.545 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:06:24.942Z,1520694384.942 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:06:25.330Z,1520694385.330 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:06:25.738Z,1520694385.738 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:06:26.146Z,1520694386.146 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:06:26.546Z,1520694386.546 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:06:26.932Z,1520694386.932 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:06:27.332Z,1520694387.332 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:06:27.729Z,1520694387.729 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:06:28.136Z,1520694388.136 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:06:28.532Z,1520694388.532 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:06:28.932Z,1520694388.932 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:06:29.332Z,1520694389.332 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:06:29.733Z,1520694389.733 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:06:30.132Z,1520694390.132 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:06:30.536Z,1520694390.536 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:06:30.932Z,1520694390.932 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:06:31.340Z,1520694391.340 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:06:31.741Z,1520694391.741 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:06:32.137Z,1520694392.137 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:06:32.536Z,1520694392.536 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:06:32.938Z,1520694392.938 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:06:33.340Z,1520694393.340 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:06:33.742Z,1520694393.742 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:06:34.150Z,1520694394.150 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:06:34.541Z,1520694394.541 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:06:34.916Z,1520694394.916 [NAL9602](ERROR): Failed to receive proper response when querying signal strength for MT queue check.
2018-03-10T15:06:34.999Z,1520694394.999 [NAL9602](FAULT): received: 
+CSQ:0

OK35, 0, 0, 0, 0

OK
2018-03-10T15:06:34.999Z,1520694394.999 [NAL9602] Data Fault, FailCount= 3
2018-03-10T15:06:34.999Z,1520694394.999 [NAL9602](ERROR): Data Fault
2018-03-10T15:06:35.016Z,1520694395.016 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:06:35.084Z,1520694395.084 [CBIT](ERROR): Data Fault in component: NAL9602
2018-03-10T15:06:35.316Z,1520694395.316 [NAL9602](INFO): Powering down
2018-03-10T15:06:35.333Z,1520694395.333 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:06:35.736Z,1520694395.736 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:06:36.136Z,1520694396.136 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:06:36.178Z,1520694396.178 [CBIT](INFO): Clearing failed state for component NAL9602
2018-03-10T15:06:36.178Z,1520694396.178 [NAL9602] No Fault, FailCount= 3
2018-03-10T15:06:36.531Z,1520694396.531 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:06:36.936Z,1520694396.936 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:06:37.333Z,1520694397.333 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:06:37.732Z,1520694397.732 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:06:38.132Z,1520694398.132 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:06:38.537Z,1520694398.537 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:06:38.937Z,1520694398.937 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:06:39.337Z,1520694399.337 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:06:39.739Z,1520694399.739 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:06:40.148Z,1520694400.148 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:06:40.540Z,1520694400.540 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:06:40.944Z,1520694400.944 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:06:41.349Z,1520694401.349 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:06:41.740Z,1520694401.740 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:06:42.144Z,1520694402.144 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:06:42.538Z,1520694402.538 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:06:42.940Z,1520694402.940 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:06:43.338Z,1520694403.338 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:06:43.732Z,1520694403.732 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:06:44.137Z,1520694404.137 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:06:44.536Z,1520694404.536 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:06:44.931Z,1520694404.931 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:06:45.328Z,1520694405.328 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:06:45.732Z,1520694405.732 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:06:46.136Z,1520694406.136 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:06:46.532Z,1520694406.532 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:06:46.932Z,1520694406.932 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:06:47.332Z,1520694407.332 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:06:47.732Z,1520694407.732 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:06:48.132Z,1520694408.132 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:06:51.309Z,1520694411.309 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:06:51.333Z,1520694411.333 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T15:06:51.333Z,1520694411.333 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 119
2018-03-10T15:06:51.333Z,1520694411.333 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-10T15:06:51.345Z,1520694411.345 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-10T15:06:51.447Z,1520694411.447 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:06:51.523Z,1520694411.523 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-10T15:06:51.523Z,1520694411.523 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 119
2018-03-10T15:06:51.793Z,1520694411.793 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:06:51.832Z,1520694411.832 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-10T15:06:51.832Z,1520694411.832 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-10T15:06:51.833Z,1520694411.833 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-10T15:06:52.186Z,1520694412.186 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:06:52.593Z,1520694412.593 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:06:52.988Z,1520694412.988 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:07:05.369Z,1520694425.369 [NAL9602](INFO): Powering up NAL9602
2018-03-10T15:07:16.564Z,1520694436.564 [NAL9602](INFO): NAL9602 initialized
2018-03-10T15:07:17.362Z,1520694437.362 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-03-10T15:07:17.362Z,1520694437.362 [NAL9602] Data Fault, FailCount= 4
2018-03-10T15:07:17.362Z,1520694437.362 [NAL9602](ERROR): Data Fault
2018-03-10T15:07:17.448Z,1520694437.448 [CBIT](ERROR): Data Fault in component: NAL9602
2018-03-10T15:07:17.764Z,1520694437.764 [NAL9602](INFO): Powering down
2018-03-10T15:07:18.641Z,1520694438.641 [CBIT](INFO): Clearing failed state for component NAL9602
2018-03-10T15:07:18.641Z,1520694438.641 [NAL9602] No Fault, FailCount= 4
2018-03-10T15:07:40.184Z,1520694460.184 [BPC1](ERROR): Failed to receive battery data
2018-03-10T15:07:40.184Z,1520694460.184 [BPC1] Communications Fault, FailCount= 1
2018-03-10T15:07:40.184Z,1520694460.184 [BPC1](ERROR): Communications Fault
2018-03-10T15:07:40.235Z,1520694460.235 [CBIT](ERROR): Communications Fault in component: BPC1
2018-03-10T15:07:41.429Z,1520694461.429 [CBIT](INFO): Clearing failed state for component BPC1
2018-03-10T15:07:41.429Z,1520694461.429 [BPC1] No Fault, FailCount= 1
2018-03-10T15:07:50.084Z,1520694470.084 [NAL9602](INFO): Powering up NAL9602
2018-03-10T15:08:00.972Z,1520694480.972 [NAL9602](INFO): NAL9602 initialized
2018-03-10T15:08:12.208Z,1520694492.208 [BPC1](FAULT): Failed to initialize
2018-03-10T15:08:12.208Z,1520694492.208 [BPC1] Communications Fault, FailCount= 2
2018-03-10T15:08:12.209Z,1520694492.209 [BPC1](ERROR): Communications Fault
2018-03-10T15:08:12.236Z,1520694492.236 [CBIT](ERROR): Communications Fault in component: BPC1
2018-03-10T15:08:13.431Z,1520694493.431 [CBIT](INFO): Clearing failed state for component BPC1
2018-03-10T15:08:13.431Z,1520694493.431 [BPC1] No Fault, FailCount= 2
2018-03-10T15:08:44.198Z,1520694524.198 [BPC1](FAULT): Failed to initialize
2018-03-10T15:08:44.198Z,1520694524.198 [BPC1] Communications Fault, FailCount= 3
2018-03-10T15:08:44.198Z,1520694524.198 [BPC1](ERROR): Communications Fault
2018-03-10T15:08:44.247Z,1520694524.247 [CBIT](ERROR): Communications Fault in component: BPC1
2018-03-10T15:08:45.440Z,1520694525.440 [CBIT](INFO): Clearing failed state for component BPC1
2018-03-10T15:08:45.440Z,1520694525.440 [BPC1] No Fault, FailCount= 3
2018-03-10T15:09:16.022Z,1520694556.022 [BPC1](FAULT): Failed to initialize
2018-03-10T15:09:16.022Z,1520694556.022 [BPC1] Communications Fault, FailCount= 4
2018-03-10T15:09:16.022Z,1520694556.022 [BPC1](ERROR): Communications Fault
2018-03-10T15:09:16.052Z,1520694556.052 [CBIT](ERROR): Communications Fault in component: BPC1
2018-03-10T15:09:17.261Z,1520694557.261 [CBIT](INFO): Clearing failed state for component BPC1
2018-03-10T15:09:17.261Z,1520694557.261 [BPC1] No Fault, FailCount= 4
2018-03-10T15:09:52.144Z,1520694592.144 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T15:09:52.145Z,1520694592.145 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 120
2018-03-10T15:09:52.145Z,1520694592.145 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-10T15:09:52.157Z,1520694592.157 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-10T15:09:52.563Z,1520694592.563 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-10T15:09:52.563Z,1520694592.563 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 120
2018-03-10T15:09:52.946Z,1520694592.946 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-10T15:09:52.946Z,1520694592.946 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-10T15:09:52.946Z,1520694592.946 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-10T15:10:46.969Z,1520694646.969 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-03-10T15:05:46.9Z
2018-03-10T15:10:46.969Z,1520694646.969 [Default:CheckIn:Read_GPS] Stopped
2018-03-10T15:10:46.969Z,1520694646.969 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-03-10T15:10:51.067Z,1520694651.067 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20180310T051512/Courier0232.lzma
2018-03-10T15:10:51.861Z,1520694651.861 [DataOverHttps](INFO): Moved sent file to Logs/20180310T051512/Courier0232.lzma.bak
2018-03-10T15:10:51.862Z,1520694651.862 [DataOverHttps](INFO): SBD MOMSN=8005612
2018-03-10T15:11:03.028Z,1520694663.028 [DataOverHttps](INFO): Sending 281 bytes from file Logs/20180310T051512/Express0233.lzma
2018-03-10T15:11:03.833Z,1520694663.833 [DataOverHttps](INFO): Moved sent file to Logs/20180310T051512/Express0233.lzma.bak
2018-03-10T15:11:03.833Z,1520694663.833 [DataOverHttps](INFO): SBD MOMSN=8005614
2018-03-10T15:11:04.623Z,1520694664.623 [Default:CheckIn:Read_Iridium] Stopped
2018-03-10T15:11:04.624Z,1520694664.624 [Default:CheckIn:C.Wait] Running Loop=1
2018-03-10T15:11:04.624Z,1520694664.624 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-03-10T15:11:08.305Z,1520694668.305 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session.
2018-03-10T15:11:38.817Z,1520694698.817 [NAL9602](INFO): Powering down
2018-03-10T15:12:17.636Z,1520694737.636 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:12:18.052Z,1520694738.052 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:12:18.455Z,1520694738.455 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:12:18.836Z,1520694738.836 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:12:19.233Z,1520694739.233 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:12:19.652Z,1520694739.652 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:12:20.038Z,1520694740.038 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:12:20.438Z,1520694740.438 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:12:20.840Z,1520694740.840 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:12:21.252Z,1520694741.252 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:12:21.636Z,1520694741.636 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:12:22.039Z,1520694742.039 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:12:22.436Z,1520694742.436 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:12:22.840Z,1520694742.840 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:12:23.260Z,1520694743.260 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:12:23.636Z,1520694743.636 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:12:24.040Z,1520694744.040 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:12:24.439Z,1520694744.439 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:12:24.836Z,1520694744.836 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:12:25.241Z,1520694745.241 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:12:25.640Z,1520694745.640 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:12:26.056Z,1520694746.056 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:12:26.444Z,1520694746.444 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:12:26.839Z,1520694746.839 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:12:27.244Z,1520694747.244 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:12:27.644Z,1520694747.644 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:12:28.040Z,1520694748.040 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:12:28.440Z,1520694748.440 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:12:28.840Z,1520694748.840 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:12:29.240Z,1520694749.240 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:12:29.640Z,1520694749.640 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:12:30.041Z,1520694750.041 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:12:30.440Z,1520694750.440 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:12:30.839Z,1520694750.839 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:12:31.248Z,1520694751.248 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:12:31.646Z,1520694751.646 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:12:32.046Z,1520694752.046 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:12:32.442Z,1520694752.442 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:12:32.848Z,1520694752.848 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:12:33.240Z,1520694753.240 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:12:33.650Z,1520694753.650 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:12:34.049Z,1520694754.049 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:12:34.448Z,1520694754.448 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:12:34.849Z,1520694754.849 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:12:35.257Z,1520694755.257 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:12:35.648Z,1520694755.648 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:12:36.044Z,1520694756.044 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:12:36.458Z,1520694756.458 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:12:36.836Z,1520694756.836 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:12:37.236Z,1520694757.236 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:12:37.643Z,1520694757.643 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:12:38.052Z,1520694758.052 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:12:38.436Z,1520694758.436 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:12:38.853Z,1520694758.853 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:12:39.248Z,1520694759.248 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:12:39.648Z,1520694759.648 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:12:40.036Z,1520694760.036 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:12:40.452Z,1520694760.452 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:12:40.849Z,1520694760.849 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:12:41.249Z,1520694761.249 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:12:41.650Z,1520694761.650 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:12:42.040Z,1520694762.040 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:12:42.440Z,1520694762.440 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:12:42.836Z,1520694762.836 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:12:43.252Z,1520694763.252 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:12:43.662Z,1520694763.662 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:12:44.052Z,1520694764.052 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:12:44.437Z,1520694764.437 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:12:44.841Z,1520694764.841 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:12:45.237Z,1520694765.237 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:12:45.645Z,1520694765.645 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:12:46.041Z,1520694766.041 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:12:46.445Z,1520694766.445 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:12:46.857Z,1520694766.857 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:12:47.240Z,1520694767.240 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:12:47.640Z,1520694767.640 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:12:48.040Z,1520694768.040 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:12:48.441Z,1520694768.441 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:12:48.839Z,1520694768.839 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:12:49.236Z,1520694769.236 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:12:49.644Z,1520694769.644 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:12:50.042Z,1520694770.042 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:12:50.440Z,1520694770.440 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:12:50.840Z,1520694770.840 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:12:51.248Z,1520694771.248 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:12:51.648Z,1520694771.648 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:12:52.048Z,1520694772.048 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:12:52.441Z,1520694772.441 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:12:52.848Z,1520694772.848 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:12:53.249Z,1520694773.249 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:12:53.297Z,1520694773.297 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T15:12:53.297Z,1520694773.297 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 121
2018-03-10T15:12:53.297Z,1520694773.297 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-10T15:12:53.310Z,1520694773.310 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-10T15:12:53.648Z,1520694773.648 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:12:53.705Z,1520694773.705 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-10T15:12:53.705Z,1520694773.705 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 121
2018-03-10T15:12:54.052Z,1520694774.052 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:12:54.070Z,1520694774.070 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-10T15:12:54.087Z,1520694774.087 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-10T15:12:54.087Z,1520694774.087 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-10T15:12:54.448Z,1520694774.448 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:12:54.849Z,1520694774.849 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:12:55.247Z,1520694775.247 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:12:55.656Z,1520694775.656 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:12:56.052Z,1520694776.052 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:12:56.451Z,1520694776.451 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:12:56.852Z,1520694776.852 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:12:57.248Z,1520694777.248 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:12:57.645Z,1520694777.645 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:12:58.044Z,1520694778.044 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:12:58.448Z,1520694778.448 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:12:58.846Z,1520694778.846 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:12:59.246Z,1520694779.246 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:12:59.653Z,1520694779.653 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:13:00.048Z,1520694780.048 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:13:00.448Z,1520694780.448 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:13:00.849Z,1520694780.849 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:13:01.248Z,1520694781.248 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:13:01.648Z,1520694781.648 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:13:02.058Z,1520694782.058 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:13:02.435Z,1520694782.435 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:13:02.841Z,1520694782.841 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:13:03.244Z,1520694783.244 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:13:03.640Z,1520694783.640 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:13:04.040Z,1520694784.040 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:13:04.443Z,1520694784.443 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:13:04.836Z,1520694784.836 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:13:05.240Z,1520694785.240 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:13:08.527Z,1520694788.527 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:13:08.653Z,1520694788.653 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:13:09.045Z,1520694789.045 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:13:09.444Z,1520694789.444 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:13:09.848Z,1520694789.848 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:13:10.232Z,1520694790.232 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:13:10.628Z,1520694790.628 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:13:11.032Z,1520694791.032 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:13:11.432Z,1520694791.432 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:13:11.837Z,1520694791.837 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:13:12.228Z,1520694792.228 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:13:12.632Z,1520694792.632 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:13:13.036Z,1520694793.036 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:13:13.439Z,1520694793.439 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:13:13.832Z,1520694793.832 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:13:14.240Z,1520694794.240 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:13:14.632Z,1520694794.632 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:13:15.052Z,1520694795.052 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:13:15.432Z,1520694795.432 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:13:15.837Z,1520694795.837 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:13:16.240Z,1520694796.240 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:13:16.640Z,1520694796.640 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:13:17.040Z,1520694797.040 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:13:17.437Z,1520694797.437 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:13:17.841Z,1520694797.841 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:13:18.241Z,1520694798.241 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:13:18.637Z,1520694798.637 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:13:19.041Z,1520694799.041 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:13:19.440Z,1520694799.440 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:13:19.860Z,1520694799.860 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:13:20.244Z,1520694800.244 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:13:20.637Z,1520694800.637 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:13:21.044Z,1520694801.044 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:13:21.432Z,1520694801.432 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:13:21.832Z,1520694801.832 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:13:22.236Z,1520694802.236 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:13:22.632Z,1520694802.632 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:13:23.033Z,1520694803.033 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:13:23.432Z,1520694803.432 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:13:23.837Z,1520694803.837 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:13:24.241Z,1520694804.241 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:13:24.638Z,1520694804.638 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:13:25.040Z,1520694805.040 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:13:25.439Z,1520694805.439 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:13:25.841Z,1520694805.841 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:13:26.238Z,1520694806.238 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:13:26.640Z,1520694806.640 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:13:27.032Z,1520694807.032 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:13:27.432Z,1520694807.432 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:13:27.832Z,1520694807.832 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:13:28.232Z,1520694808.232 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:13:28.636Z,1520694808.636 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:13:29.031Z,1520694809.031 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:13:29.440Z,1520694809.440 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:13:29.833Z,1520694809.833 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:13:30.233Z,1520694810.233 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:13:30.641Z,1520694810.641 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:13:31.040Z,1520694811.040 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:13:31.441Z,1520694811.441 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:13:31.840Z,1520694811.840 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:13:32.243Z,1520694812.243 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:13:32.640Z,1520694812.640 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:13:33.040Z,1520694813.040 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:13:33.432Z,1520694813.432 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:13:33.832Z,1520694813.832 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:13:34.252Z,1520694814.252 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:13:34.632Z,1520694814.632 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:13:35.032Z,1520694815.032 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:13:35.438Z,1520694815.438 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:13:35.840Z,1520694815.840 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:13:36.241Z,1520694816.241 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:13:36.640Z,1520694816.640 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:13:37.044Z,1520694817.044 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:13:37.442Z,1520694817.442 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:13:37.840Z,1520694817.840 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:13:38.244Z,1520694818.244 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:13:38.644Z,1520694818.644 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:13:39.035Z,1520694819.035 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:13:39.432Z,1520694819.432 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:13:39.831Z,1520694819.831 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:13:40.236Z,1520694820.236 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:13:40.636Z,1520694820.636 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:13:41.038Z,1520694821.038 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:13:41.440Z,1520694821.440 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:13:41.841Z,1520694821.841 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:13:42.242Z,1520694822.242 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:13:42.633Z,1520694822.633 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:13:43.033Z,1520694823.033 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:13:43.432Z,1520694823.432 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:13:43.833Z,1520694823.833 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:13:44.237Z,1520694824.237 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:13:44.636Z,1520694824.636 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:13:45.033Z,1520694825.033 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:13:45.436Z,1520694825.436 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:13:45.836Z,1520694825.836 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:13:46.258Z,1520694826.258 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:13:46.637Z,1520694826.637 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:13:47.037Z,1520694827.037 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:13:47.439Z,1520694827.439 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:13:47.829Z,1520694827.829 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:13:48.232Z,1520694828.232 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:13:48.632Z,1520694828.632 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:13:49.029Z,1520694829.029 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:13:49.432Z,1520694829.432 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:13:49.841Z,1520694829.841 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:13:50.233Z,1520694830.233 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:13:50.638Z,1520694830.638 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:13:51.040Z,1520694831.040 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:13:51.440Z,1520694831.440 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:13:51.842Z,1520694831.842 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:13:52.236Z,1520694832.236 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:13:52.632Z,1520694832.632 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:13:53.032Z,1520694833.032 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:13:53.437Z,1520694833.437 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:13:53.837Z,1520694833.837 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:13:54.236Z,1520694834.236 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:13:54.635Z,1520694834.635 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:13:55.028Z,1520694835.028 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:13:55.436Z,1520694835.436 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:13:55.840Z,1520694835.840 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:13:56.240Z,1520694836.240 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:13:56.640Z,1520694836.640 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:13:57.036Z,1520694837.036 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:13:57.427Z,1520694837.427 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:13:57.837Z,1520694837.837 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:13:58.232Z,1520694838.232 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:13:58.632Z,1520694838.632 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:13:59.052Z,1520694839.052 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:13:59.432Z,1520694839.432 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:13:59.832Z,1520694839.832 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:14:00.233Z,1520694840.233 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:14:00.637Z,1520694840.637 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:14:01.038Z,1520694841.038 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:14:01.436Z,1520694841.436 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:14:01.832Z,1520694841.832 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:14:02.228Z,1520694842.228 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:14:02.632Z,1520694842.632 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:14:03.032Z,1520694843.032 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:14:03.433Z,1520694843.433 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:14:03.833Z,1520694843.833 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:14:04.232Z,1520694844.232 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:14:04.632Z,1520694844.632 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:14:05.036Z,1520694845.036 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:14:05.433Z,1520694845.433 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:14:08.741Z,1520694848.741 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:14:08.882Z,1520694848.882 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:14:09.266Z,1520694849.266 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:14:09.668Z,1520694849.668 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:14:10.068Z,1520694850.068 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:14:10.460Z,1520694850.460 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:14:10.860Z,1520694850.860 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:14:11.269Z,1520694851.269 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:14:11.664Z,1520694851.664 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:14:12.056Z,1520694852.056 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:14:12.476Z,1520694852.476 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:14:12.856Z,1520694852.856 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:14:13.269Z,1520694853.269 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:14:13.676Z,1520694853.676 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:14:14.056Z,1520694854.056 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:14:14.452Z,1520694854.452 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:14:14.868Z,1520694854.868 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:14:15.256Z,1520694855.256 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:14:15.650Z,1520694855.650 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:14:16.056Z,1520694856.056 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:14:16.456Z,1520694856.456 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:14:16.868Z,1520694856.868 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:14:17.269Z,1520694857.269 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:14:17.656Z,1520694857.656 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:14:18.069Z,1520694858.069 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:14:18.456Z,1520694858.456 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:14:18.856Z,1520694858.856 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:14:19.256Z,1520694859.256 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:14:19.656Z,1520694859.656 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:14:20.072Z,1520694860.072 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:14:20.456Z,1520694860.456 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:14:20.897Z,1520694860.897 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:14:21.260Z,1520694861.260 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:14:21.652Z,1520694861.652 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:14:22.060Z,1520694862.060 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:14:22.456Z,1520694862.456 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:14:22.860Z,1520694862.860 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:14:23.260Z,1520694863.260 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:14:23.656Z,1520694863.656 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:14:24.056Z,1520694864.056 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:14:24.456Z,1520694864.456 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:14:24.857Z,1520694864.857 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:14:25.256Z,1520694865.256 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:14:25.664Z,1520694865.664 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:14:26.056Z,1520694866.056 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:14:26.462Z,1520694866.462 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:14:26.873Z,1520694866.873 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:14:27.267Z,1520694867.267 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:14:27.666Z,1520694867.666 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:14:28.066Z,1520694868.066 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:14:28.464Z,1520694868.464 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:14:28.865Z,1520694868.865 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:14:29.261Z,1520694869.261 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:14:29.667Z,1520694869.667 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:14:30.063Z,1520694870.063 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:14:30.470Z,1520694870.470 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:14:30.860Z,1520694870.860 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:14:31.266Z,1520694871.266 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:14:31.665Z,1520694871.665 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:14:32.074Z,1520694872.074 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:14:32.463Z,1520694872.463 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:14:32.864Z,1520694872.864 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:14:33.268Z,1520694873.268 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:14:33.663Z,1520694873.663 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:14:34.052Z,1520694874.052 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:14:34.469Z,1520694874.469 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:14:34.864Z,1520694874.864 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:14:35.252Z,1520694875.252 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:14:35.672Z,1520694875.672 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:14:36.056Z,1520694876.056 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:14:36.469Z,1520694876.469 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:14:36.856Z,1520694876.856 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:14:37.252Z,1520694877.252 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:14:37.656Z,1520694877.656 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:14:38.076Z,1520694878.076 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:14:38.452Z,1520694878.452 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:14:38.856Z,1520694878.856 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:14:39.256Z,1520694879.256 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:14:39.652Z,1520694879.652 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:14:40.056Z,1520694880.056 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:14:40.476Z,1520694880.476 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:14:40.853Z,1520694880.853 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:14:41.255Z,1520694881.255 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:14:41.657Z,1520694881.657 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:14:42.056Z,1520694882.056 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:14:42.456Z,1520694882.456 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:14:42.860Z,1520694882.860 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:14:43.264Z,1520694883.264 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:14:43.661Z,1520694883.661 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:14:44.066Z,1520694884.066 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:14:44.463Z,1520694884.463 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:14:44.876Z,1520694884.876 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:14:45.270Z,1520694885.270 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:14:45.664Z,1520694885.664 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:14:46.067Z,1520694886.067 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:14:46.474Z,1520694886.474 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:14:46.860Z,1520694886.860 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:14:47.262Z,1520694887.262 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:14:47.664Z,1520694887.664 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:14:48.059Z,1520694888.059 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:14:48.468Z,1520694888.468 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:14:48.860Z,1520694888.860 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:14:49.268Z,1520694889.268 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:14:49.652Z,1520694889.652 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:14:50.056Z,1520694890.056 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:14:50.456Z,1520694890.456 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:14:50.856Z,1520694890.856 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:14:51.256Z,1520694891.256 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:14:51.656Z,1520694891.656 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:14:52.052Z,1520694892.052 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:14:52.456Z,1520694892.456 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:14:52.857Z,1520694892.857 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:14:53.252Z,1520694893.252 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:14:53.659Z,1520694893.659 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:14:54.056Z,1520694894.056 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:14:54.452Z,1520694894.452 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:14:54.856Z,1520694894.856 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:14:55.260Z,1520694895.260 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:14:55.660Z,1520694895.660 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:14:56.056Z,1520694896.056 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:14:56.460Z,1520694896.460 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:14:56.856Z,1520694896.856 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:14:57.256Z,1520694897.256 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:14:57.657Z,1520694897.657 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:14:58.056Z,1520694898.056 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:14:58.462Z,1520694898.462 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:14:58.861Z,1520694898.861 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:14:59.268Z,1520694899.268 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:14:59.662Z,1520694899.662 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:15:00.065Z,1520694900.065 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:15:00.464Z,1520694900.464 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:15:00.860Z,1520694900.860 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:15:01.262Z,1520694901.262 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:15:01.660Z,1520694901.660 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:15:02.062Z,1520694902.062 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:15:02.461Z,1520694902.461 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:15:02.864Z,1520694902.864 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:15:03.273Z,1520694903.273 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:15:03.659Z,1520694903.659 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:15:04.068Z,1520694904.068 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:15:04.474Z,1520694904.474 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:15:04.852Z,1520694904.852 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:15:05.250Z,1520694905.250 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:15:05.656Z,1520694905.656 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:15:08.797Z,1520694908.797 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:15:08.909Z,1520694908.909 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:15:09.286Z,1520694909.286 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:15:09.690Z,1520694909.690 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:15:10.091Z,1520694910.091 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:15:10.488Z,1520694910.488 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:15:10.889Z,1520694910.889 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:15:11.295Z,1520694911.295 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:15:11.688Z,1520694911.688 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:15:12.076Z,1520694912.076 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:15:12.492Z,1520694912.492 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:15:12.883Z,1520694912.883 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:15:13.293Z,1520694913.293 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:15:13.692Z,1520694913.692 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:15:14.088Z,1520694914.088 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:15:14.476Z,1520694914.476 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:15:14.892Z,1520694914.892 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:15:15.288Z,1520694915.288 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:15:15.688Z,1520694915.688 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:15:16.089Z,1520694916.089 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:15:16.499Z,1520694916.499 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:15:16.876Z,1520694916.876 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:15:17.276Z,1520694917.276 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:15:17.700Z,1520694917.700 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:15:18.077Z,1520694918.077 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:15:18.480Z,1520694918.480 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:15:18.884Z,1520694918.884 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:15:19.284Z,1520694919.284 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:15:19.676Z,1520694919.676 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:15:20.089Z,1520694920.089 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:15:20.485Z,1520694920.485 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:15:20.890Z,1520694920.890 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:15:21.286Z,1520694921.286 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:15:21.684Z,1520694921.684 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:15:22.086Z,1520694922.086 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:15:22.493Z,1520694922.493 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:15:22.889Z,1520694922.889 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:15:23.288Z,1520694923.288 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:15:23.688Z,1520694923.688 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:15:24.088Z,1520694924.088 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:15:24.488Z,1520694924.488 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:15:24.897Z,1520694924.897 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:15:25.290Z,1520694925.290 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:15:25.676Z,1520694925.676 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:15:26.092Z,1520694926.092 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:15:26.476Z,1520694926.476 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:15:26.876Z,1520694926.876 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:15:27.293Z,1520694927.293 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:15:27.691Z,1520694927.691 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:15:28.076Z,1520694928.076 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:15:28.488Z,1520694928.488 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:15:28.889Z,1520694928.889 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:15:29.276Z,1520694929.276 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:15:29.693Z,1520694929.693 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:15:30.087Z,1520694930.087 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:15:30.476Z,1520694930.476 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:15:30.892Z,1520694930.892 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:15:31.280Z,1520694931.280 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:15:31.693Z,1520694931.693 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:15:32.080Z,1520694932.080 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:15:32.480Z,1520694932.480 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:15:32.892Z,1520694932.892 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:15:33.280Z,1520694933.280 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:15:33.680Z,1520694933.680 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:15:34.080Z,1520694934.080 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:15:34.481Z,1520694934.481 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:15:34.880Z,1520694934.880 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:15:35.280Z,1520694935.280 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:15:35.700Z,1520694935.700 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:15:36.080Z,1520694936.080 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:15:36.476Z,1520694936.476 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:15:36.892Z,1520694936.892 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:15:37.284Z,1520694937.284 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:15:37.680Z,1520694937.680 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:15:38.080Z,1520694938.080 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:15:38.480Z,1520694938.480 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:15:38.884Z,1520694938.884 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:15:39.288Z,1520694939.288 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:15:39.681Z,1520694939.681 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:15:40.085Z,1520694940.085 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:15:40.132Z,1520694940.132 [CBIT](DEBUG): EFC running - data check-sum false
2018-03-10T15:15:40.487Z,1520694940.487 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:15:40.886Z,1520694940.886 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:15:41.290Z,1520694941.290 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:15:41.697Z,1520694941.697 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:15:42.092Z,1520694942.092 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:15:42.484Z,1520694942.484 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:15:42.884Z,1520694942.884 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:15:43.288Z,1520694943.288 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:15:43.688Z,1520694943.688 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:15:44.090Z,1520694944.090 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:15:44.492Z,1520694944.492 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:15:44.884Z,1520694944.884 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:15:45.288Z,1520694945.288 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:15:45.692Z,1520694945.692 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:15:46.090Z,1520694946.090 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:15:46.494Z,1520694946.494 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:15:46.893Z,1520694946.893 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:15:47.289Z,1520694947.289 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:15:47.683Z,1520694947.683 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:15:48.081Z,1520694948.081 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:15:48.480Z,1520694948.480 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:15:48.880Z,1520694948.880 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:15:49.276Z,1520694949.276 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:15:49.676Z,1520694949.676 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:15:50.084Z,1520694950.084 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:15:50.484Z,1520694950.484 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:15:50.881Z,1520694950.881 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:15:51.280Z,1520694951.280 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:15:51.678Z,1520694951.678 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:15:52.088Z,1520694952.088 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:15:52.488Z,1520694952.488 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:15:52.890Z,1520694952.890 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:15:53.284Z,1520694953.284 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:15:53.689Z,1520694953.689 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:15:54.084Z,1520694954.084 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:15:54.102Z,1520694954.102 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T15:15:54.102Z,1520694954.102 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 122
2018-03-10T15:15:54.102Z,1520694954.102 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-10T15:15:54.114Z,1520694954.114 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-10T15:15:54.488Z,1520694954.488 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:15:54.517Z,1520694954.517 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-10T15:15:54.517Z,1520694954.517 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 122
2018-03-10T15:15:54.888Z,1520694954.888 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:15:54.911Z,1520694954.911 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-10T15:15:54.912Z,1520694954.912 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-10T15:15:54.912Z,1520694954.912 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-10T15:15:55.283Z,1520694955.283 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:15:55.689Z,1520694955.689 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:15:56.088Z,1520694956.088 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:15:56.484Z,1520694956.484 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:15:56.886Z,1520694956.886 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:15:57.283Z,1520694957.283 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:15:57.685Z,1520694957.685 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:15:58.093Z,1520694958.093 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:15:58.484Z,1520694958.484 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:15:58.893Z,1520694958.893 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:15:59.293Z,1520694959.293 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:15:59.688Z,1520694959.688 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:16:00.089Z,1520694960.089 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:16:00.489Z,1520694960.489 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:16:00.881Z,1520694960.881 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:16:01.276Z,1520694961.276 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:16:01.676Z,1520694961.676 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:16:02.080Z,1520694962.080 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:16:02.477Z,1520694962.477 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:16:02.876Z,1520694962.876 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:16:03.300Z,1520694963.300 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:16:03.676Z,1520694963.676 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:16:04.080Z,1520694964.080 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:16:04.481Z,1520694964.481 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:16:04.892Z,1520694964.892 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:16:04.911Z,1520694964.911 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-03-10T15:16:04.912Z,1520694964.912 [Default:CheckIn:C.Wait] Stopped
2018-03-10T15:16:04.912Z,1520694964.912 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-03-10T15:16:04.912Z,1520694964.912 [Default:CheckIn:D] Running Loop=1
2018-03-10T15:16:05.276Z,1520694965.276 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:16:05.317Z,1520694965.317 [Default:CheckIn:D] Stopped
2018-03-10T15:16:05.317Z,1520694965.317 [Default:CheckIn:E] Running Loop=1
2018-03-10T15:16:05.680Z,1520694965.680 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:16:05.719Z,1520694965.719 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 596.789909 min 
2018-03-10T15:16:05.719Z,1520694965.719 [Default:CheckIn:E] Stopped
2018-03-10T15:16:05.719Z,1520694965.719 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-03-10T15:16:05.719Z,1520694965.719 [Default:CheckIn] Stopped
2018-03-10T15:16:05.719Z,1520694965.719 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-03-10T15:16:05.720Z,1520694965.720 [Default:CheckIn](INFO): Running loop #59
2018-03-10T15:16:05.720Z,1520694965.720 [Default:CheckIn] Running Loop=59
2018-03-10T15:16:05.720Z,1520694965.720 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-03-10T15:16:05.720Z,1520694965.720 [Default:CheckIn:Read_GPS] Running Loop=1
2018-03-10T15:16:08.958Z,1520694968.958 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:16:09.050Z,1520694969.050 [NAL9602](INFO): Powering up
2018-03-10T15:16:09.066Z,1520694969.066 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:16:09.428Z,1520694969.428 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:16:09.826Z,1520694969.826 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:16:10.228Z,1520694970.228 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:16:10.626Z,1520694970.626 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:16:11.023Z,1520694971.023 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:16:11.418Z,1520694971.418 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:16:11.830Z,1520694971.830 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:16:12.216Z,1520694972.216 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:16:12.633Z,1520694972.633 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:16:13.029Z,1520694973.029 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:16:13.432Z,1520694973.432 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:16:13.817Z,1520694973.817 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:16:14.221Z,1520694974.221 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:16:14.621Z,1520694974.621 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:16:15.016Z,1520694975.016 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:16:15.420Z,1520694975.420 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:16:15.825Z,1520694975.825 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:16:16.225Z,1520694976.225 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:16:16.628Z,1520694976.628 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:16:17.028Z,1520694977.028 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:16:17.428Z,1520694977.428 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:16:17.824Z,1520694977.824 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:16:18.224Z,1520694978.224 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:16:18.628Z,1520694978.628 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:16:19.027Z,1520694979.027 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:16:19.425Z,1520694979.425 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:16:19.835Z,1520694979.835 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:16:20.204Z,1520694980.204 [NAL9602](INFO): NAL9602 initialized
2018-03-10T15:16:20.228Z,1520694980.228 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:16:20.626Z,1520694980.626 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:16:21.047Z,1520694981.047 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:16:21.435Z,1520694981.435 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:16:21.838Z,1520694981.838 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:16:22.221Z,1520694982.221 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:16:22.621Z,1520694982.621 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:16:23.021Z,1520694983.021 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:16:23.429Z,1520694983.429 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:16:23.833Z,1520694983.833 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:16:24.221Z,1520694984.221 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:16:24.629Z,1520694984.629 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:16:25.029Z,1520694985.029 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:16:25.417Z,1520694985.417 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:16:25.828Z,1520694985.828 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:16:26.220Z,1520694986.220 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:16:26.624Z,1520694986.624 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:16:27.025Z,1520694987.025 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:16:27.421Z,1520694987.421 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:16:27.820Z,1520694987.820 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:16:28.233Z,1520694988.233 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:16:28.625Z,1520694988.625 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:16:29.032Z,1520694989.032 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:16:29.429Z,1520694989.429 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:16:29.826Z,1520694989.826 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:16:30.228Z,1520694990.228 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:16:30.628Z,1520694990.628 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:16:31.026Z,1520694991.026 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:16:31.416Z,1520694991.416 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:16:31.834Z,1520694991.834 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:16:32.222Z,1520694992.222 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:16:32.620Z,1520694992.620 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:16:33.021Z,1520694993.021 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:16:33.424Z,1520694993.424 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:16:33.816Z,1520694993.816 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:16:34.221Z,1520694994.221 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:16:34.620Z,1520694994.620 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:16:35.027Z,1520694995.027 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:16:35.433Z,1520694995.433 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:16:35.839Z,1520694995.839 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:16:36.227Z,1520694996.227 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:16:36.626Z,1520694996.626 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:16:37.026Z,1520694997.026 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:16:37.430Z,1520694997.430 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:16:37.831Z,1520694997.831 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:16:38.225Z,1520694998.225 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:16:38.617Z,1520694998.617 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:16:39.018Z,1520694999.018 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:16:39.433Z,1520694999.433 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:16:39.820Z,1520694999.820 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:16:40.234Z,1520695000.234 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:16:40.621Z,1520695000.621 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:16:41.043Z,1520695001.043 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:16:41.425Z,1520695001.425 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:16:41.832Z,1520695001.832 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:16:42.236Z,1520695002.236 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:16:42.629Z,1520695002.629 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:16:43.026Z,1520695003.026 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:16:43.432Z,1520695003.432 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:16:43.822Z,1520695003.822 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:16:44.225Z,1520695004.225 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:16:44.628Z,1520695004.628 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:16:45.029Z,1520695005.029 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:16:45.426Z,1520695005.426 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:16:45.830Z,1520695005.830 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:16:46.221Z,1520695006.221 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:16:46.633Z,1520695006.633 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:16:47.020Z,1520695007.020 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:16:47.425Z,1520695007.425 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:16:47.831Z,1520695007.831 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:16:48.226Z,1520695008.226 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:16:48.633Z,1520695008.633 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:16:49.032Z,1520695009.032 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:16:49.430Z,1520695009.430 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:16:49.825Z,1520695009.825 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:16:50.228Z,1520695010.228 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:16:50.624Z,1520695010.624 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:16:51.028Z,1520695011.028 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:16:51.424Z,1520695011.424 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:16:51.833Z,1520695011.833 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:16:52.200Z,1520695012.200 [NAL9602](ERROR): Failed to receive proper response when querying signal strength for MT queue check.
2018-03-10T15:16:52.283Z,1520695012.283 [NAL9602](FAULT): received: 
+CSQ:0

OK35, 0, 0, 0, 0

OK
2018-03-10T15:16:52.283Z,1520695012.283 [NAL9602] Data Fault, FailCount= 5
2018-03-10T15:16:52.283Z,1520695012.283 [NAL9602](ERROR): Data Fault
2018-03-10T15:16:52.300Z,1520695012.300 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:16:52.366Z,1520695012.366 [CBIT](ERROR): Data Fault in component: NAL9602
2018-03-10T15:16:52.366Z,1520695012.366 [CBIT](CRITICAL): Data Fault in component: NAL9602
2018-03-10T15:16:52.604Z,1520695012.604 [NAL9602](INFO): Powering down
2018-03-10T15:16:52.622Z,1520695012.622 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:16:52.684Z,1520695012.684 [CBIT](INFO): Critical error at 20180310T151652
2018-03-10T15:16:53.016Z,1520695013.016 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:16:53.424Z,1520695013.424 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:16:53.833Z,1520695013.833 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:16:54.221Z,1520695014.221 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:16:54.628Z,1520695014.628 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:16:55.033Z,1520695015.033 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:16:55.429Z,1520695015.429 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:16:55.829Z,1520695015.829 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:16:56.226Z,1520695016.226 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:16:56.616Z,1520695016.616 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:16:57.031Z,1520695017.031 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:16:57.420Z,1520695017.420 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:16:57.824Z,1520695017.824 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:16:58.224Z,1520695018.224 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:16:58.620Z,1520695018.620 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:16:59.024Z,1520695019.024 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:16:59.417Z,1520695019.417 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:16:59.820Z,1520695019.820 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:17:00.225Z,1520695020.225 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:17:00.620Z,1520695020.620 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:17:01.036Z,1520695021.036 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:17:01.426Z,1520695021.426 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:17:01.824Z,1520695021.824 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:17:02.228Z,1520695022.228 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:17:02.626Z,1520695022.626 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:17:03.029Z,1520695023.029 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:17:03.426Z,1520695023.426 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:17:03.823Z,1520695023.823 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:17:04.226Z,1520695024.226 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:17:04.626Z,1520695024.626 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:17:05.024Z,1520695025.024 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:17:05.429Z,1520695025.429 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:17:05.826Z,1520695025.826 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:17:09.070Z,1520695029.070 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:17:09.215Z,1520695029.215 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:17:09.568Z,1520695029.568 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:17:09.962Z,1520695029.962 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:17:10.361Z,1520695030.361 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:17:10.760Z,1520695030.760 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:17:11.164Z,1520695031.164 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:17:11.556Z,1520695031.556 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:17:11.964Z,1520695031.964 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:17:12.363Z,1520695032.363 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:17:12.775Z,1520695032.775 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:17:13.165Z,1520695033.165 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:17:13.563Z,1520695033.563 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:17:13.960Z,1520695033.960 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:17:14.373Z,1520695034.373 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:17:14.774Z,1520695034.774 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:17:15.165Z,1520695035.165 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:17:15.568Z,1520695035.568 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:17:15.967Z,1520695035.967 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:17:16.357Z,1520695036.357 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:17:16.762Z,1520695036.762 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:17:17.156Z,1520695037.156 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:17:17.560Z,1520695037.560 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:17:17.956Z,1520695037.956 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:17:18.358Z,1520695038.358 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:17:18.771Z,1520695038.771 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:17:19.160Z,1520695039.160 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:17:19.575Z,1520695039.575 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:17:19.981Z,1520695039.981 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:17:20.364Z,1520695040.364 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:17:20.777Z,1520695040.777 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:17:20.799Z,1520695040.799 [BPC1](ERROR): Failed to receive battery data
2018-03-10T15:17:20.799Z,1520695040.799 [BPC1] Communications Fault, FailCount= 1
2018-03-10T15:17:20.799Z,1520695040.799 [BPC1](ERROR): Communications Fault
2018-03-10T15:17:20.849Z,1520695040.849 [CBIT](ERROR): Communications Fault in component: BPC1
2018-03-10T15:17:21.177Z,1520695041.177 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:17:21.558Z,1520695041.558 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:17:21.960Z,1520695041.960 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:17:22.009Z,1520695042.009 [CBIT](INFO): Clearing failed state for component BPC1
2018-03-10T15:17:22.009Z,1520695042.009 [BPC1] No Fault, FailCount= 1
2018-03-10T15:17:22.353Z,1520695042.353 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:17:22.756Z,1520695042.756 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:17:23.162Z,1520695043.162 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:17:23.560Z,1520695043.560 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:17:23.961Z,1520695043.961 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:17:24.367Z,1520695044.367 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:17:24.765Z,1520695044.765 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:17:25.162Z,1520695045.162 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:17:25.563Z,1520695045.563 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:17:25.989Z,1520695045.989 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:17:26.379Z,1520695046.379 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:17:26.764Z,1520695046.764 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:17:27.163Z,1520695047.163 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:17:27.569Z,1520695047.569 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:17:27.966Z,1520695047.966 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:17:28.374Z,1520695048.374 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:17:28.765Z,1520695048.765 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:17:29.176Z,1520695049.176 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:17:29.550Z,1520695049.550 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:17:29.969Z,1520695049.969 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:17:30.363Z,1520695050.363 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:17:30.754Z,1520695050.754 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:17:31.154Z,1520695051.154 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:17:31.569Z,1520695051.569 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:17:31.971Z,1520695051.971 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:17:32.356Z,1520695052.356 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:17:32.762Z,1520695052.762 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:17:33.160Z,1520695053.160 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:17:33.579Z,1520695053.579 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:17:33.960Z,1520695053.960 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:17:34.364Z,1520695054.364 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:17:34.765Z,1520695054.765 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:17:35.167Z,1520695055.167 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:17:35.572Z,1520695055.572 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:17:35.967Z,1520695055.967 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:17:36.365Z,1520695056.365 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:17:36.760Z,1520695056.760 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:17:37.176Z,1520695057.176 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:17:37.553Z,1520695057.553 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:17:37.952Z,1520695057.952 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:17:38.369Z,1520695058.369 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:17:38.771Z,1520695058.771 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:17:39.153Z,1520695059.153 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:17:39.567Z,1520695059.567 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:17:39.968Z,1520695059.968 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:17:40.350Z,1520695060.350 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:17:40.753Z,1520695060.753 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:17:41.156Z,1520695061.156 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:17:41.554Z,1520695061.554 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:17:41.957Z,1520695061.957 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:17:42.353Z,1520695062.353 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:17:42.756Z,1520695062.756 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:17:43.161Z,1520695063.161 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:17:43.567Z,1520695063.567 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:17:43.976Z,1520695063.976 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:17:44.369Z,1520695064.369 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:17:44.768Z,1520695064.768 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:17:45.161Z,1520695065.161 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:17:45.566Z,1520695065.566 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:17:45.964Z,1520695065.964 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:17:46.361Z,1520695066.361 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:17:46.765Z,1520695066.765 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:17:47.169Z,1520695067.169 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:17:47.573Z,1520695067.573 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:17:48.002Z,1520695068.002 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:17:48.402Z,1520695068.402 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:17:48.750Z,1520695068.750 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:17:49.161Z,1520695069.161 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:17:49.573Z,1520695069.573 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:17:49.970Z,1520695069.970 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:17:50.366Z,1520695070.366 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:17:50.764Z,1520695070.764 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:17:51.171Z,1520695071.171 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:17:51.556Z,1520695071.556 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:17:51.970Z,1520695071.970 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:17:52.349Z,1520695072.349 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:17:52.756Z,1520695072.756 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:17:52.764Z,1520695072.764 [BPC1](FAULT): Failed to initialize
2018-03-10T15:17:52.765Z,1520695072.765 [BPC1] Communications Fault, FailCount= 2
2018-03-10T15:17:52.765Z,1520695072.765 [BPC1](ERROR): Communications Fault
2018-03-10T15:17:52.850Z,1520695072.850 [CBIT](ERROR): Communications Fault in component: BPC1
2018-03-10T15:17:53.156Z,1520695073.156 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:17:53.555Z,1520695073.555 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:17:53.956Z,1520695073.956 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:17:54.019Z,1520695074.019 [CBIT](INFO): Clearing failed state for component BPC1
2018-03-10T15:17:54.019Z,1520695074.019 [BPC1] No Fault, FailCount= 2
2018-03-10T15:17:54.360Z,1520695074.360 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:17:54.754Z,1520695074.754 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:17:55.162Z,1520695075.162 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:17:55.566Z,1520695075.566 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:17:55.970Z,1520695075.970 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:17:56.362Z,1520695076.362 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:17:56.764Z,1520695076.764 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:17:57.159Z,1520695077.159 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:17:57.615Z,1520695077.615 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:17:57.962Z,1520695077.962 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:17:58.370Z,1520695078.370 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:17:58.773Z,1520695078.773 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:17:59.168Z,1520695079.168 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:17:59.562Z,1520695079.562 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:17:59.971Z,1520695079.971 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:18:00.362Z,1520695080.362 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:18:00.760Z,1520695080.760 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:18:01.165Z,1520695081.165 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:18:01.568Z,1520695081.568 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:18:01.952Z,1520695081.952 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:18:02.352Z,1520695082.352 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:18:02.771Z,1520695082.771 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:18:03.180Z,1520695083.180 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:18:03.556Z,1520695083.556 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:18:03.960Z,1520695083.960 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:18:04.356Z,1520695084.356 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:18:04.780Z,1520695084.780 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:18:05.158Z,1520695085.158 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:18:05.577Z,1520695085.577 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:18:05.956Z,1520695085.956 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:18:09.134Z,1520695089.134 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:18:09.254Z,1520695089.254 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:18:09.648Z,1520695089.648 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:18:10.040Z,1520695090.040 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:18:10.447Z,1520695090.447 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:18:10.853Z,1520695090.853 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:18:11.247Z,1520695091.247 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:18:11.644Z,1520695091.644 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:18:12.044Z,1520695092.044 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:18:12.448Z,1520695092.448 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:18:12.844Z,1520695092.844 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:18:13.248Z,1520695093.248 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:18:13.642Z,1520695093.642 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:18:14.048Z,1520695094.048 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:18:14.445Z,1520695094.445 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:18:14.844Z,1520695094.844 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:18:15.244Z,1520695095.244 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:18:15.641Z,1520695095.641 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:18:16.049Z,1520695096.049 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:18:16.437Z,1520695096.437 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:18:16.836Z,1520695096.836 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:18:17.232Z,1520695097.232 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:18:17.632Z,1520695097.632 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:18:18.036Z,1520695098.036 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:18:18.433Z,1520695098.433 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:18:18.836Z,1520695098.836 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:18:19.242Z,1520695099.242 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:18:19.632Z,1520695099.632 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:18:20.041Z,1520695100.041 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:18:20.440Z,1520695100.440 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:18:20.844Z,1520695100.844 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:18:21.244Z,1520695101.244 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:18:21.644Z,1520695101.644 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:18:22.045Z,1520695102.045 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:18:22.444Z,1520695102.444 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:18:22.843Z,1520695102.843 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:18:23.244Z,1520695103.244 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:18:23.643Z,1520695103.643 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:18:24.040Z,1520695104.040 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:18:24.440Z,1520695104.440 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:18:24.449Z,1520695104.449 [BPC1](FAULT): Failed to initialize
2018-03-10T15:18:24.449Z,1520695104.449 [BPC1] Communications Fault, FailCount= 3
2018-03-10T15:18:24.449Z,1520695104.449 [BPC1](ERROR): Communications Fault
2018-03-10T15:18:24.471Z,1520695104.471 [CBIT](ERROR): Communications Fault in component: BPC1
2018-03-10T15:18:24.842Z,1520695104.842 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:18:25.253Z,1520695105.253 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:18:25.633Z,1520695105.633 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:18:25.682Z,1520695105.682 [CBIT](INFO): Clearing failed state for component BPC1
2018-03-10T15:18:25.682Z,1520695105.682 [BPC1] No Fault, FailCount= 3
2018-03-10T15:18:26.046Z,1520695106.046 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:18:26.447Z,1520695106.447 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:18:26.848Z,1520695106.848 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:18:27.248Z,1520695107.248 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:18:27.640Z,1520695107.640 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:18:28.049Z,1520695108.049 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:18:28.448Z,1520695108.448 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:18:28.844Z,1520695108.844 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:18:29.234Z,1520695109.234 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:18:29.645Z,1520695109.645 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:18:30.045Z,1520695110.045 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:18:30.433Z,1520695110.433 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:18:30.855Z,1520695110.855 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:18:31.236Z,1520695111.236 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:18:31.633Z,1520695111.633 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:18:32.036Z,1520695112.036 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:18:32.436Z,1520695112.436 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:18:32.848Z,1520695112.848 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:18:33.247Z,1520695113.247 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:18:33.636Z,1520695113.636 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:18:34.047Z,1520695114.047 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:18:34.437Z,1520695114.437 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:18:34.836Z,1520695114.836 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:18:35.233Z,1520695115.233 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:18:35.636Z,1520695115.636 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:18:36.036Z,1520695116.036 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:18:36.433Z,1520695116.433 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:18:36.838Z,1520695116.838 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:18:37.256Z,1520695117.256 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:18:37.633Z,1520695117.633 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:18:38.040Z,1520695118.040 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:18:38.436Z,1520695118.436 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:18:38.840Z,1520695118.840 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:18:39.240Z,1520695119.240 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:18:39.640Z,1520695119.640 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:18:40.040Z,1520695120.040 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:18:40.438Z,1520695120.438 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:18:40.844Z,1520695120.844 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:18:41.240Z,1520695121.240 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:18:41.644Z,1520695121.644 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:18:42.042Z,1520695122.042 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:18:42.442Z,1520695122.442 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:18:42.850Z,1520695122.850 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:18:43.244Z,1520695123.244 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:18:43.642Z,1520695123.642 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:18:44.052Z,1520695124.052 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:18:44.448Z,1520695124.448 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:18:44.843Z,1520695124.843 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:18:45.248Z,1520695125.248 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:18:45.642Z,1520695125.642 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:18:46.043Z,1520695126.043 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:18:46.447Z,1520695126.447 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:18:46.842Z,1520695126.842 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:18:47.248Z,1520695127.248 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:18:47.642Z,1520695127.642 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:18:48.042Z,1520695128.042 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:18:48.440Z,1520695128.440 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:18:48.845Z,1520695128.845 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:18:49.244Z,1520695129.244 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:18:49.644Z,1520695129.644 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:18:50.045Z,1520695130.045 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:18:50.453Z,1520695130.453 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:18:50.840Z,1520695130.840 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:18:51.240Z,1520695131.240 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:18:51.646Z,1520695131.646 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:18:52.053Z,1520695132.053 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:18:52.434Z,1520695132.434 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:18:52.489Z,1520695132.489 [CBIT](INFO): Clearing failed state for component NAL9602
2018-03-10T15:18:52.489Z,1520695132.489 [NAL9602] No Fault, FailCount= 5
2018-03-10T15:18:52.825Z,1520695132.825 [NAL9602](INFO): Powering up NAL9602
2018-03-10T15:18:52.854Z,1520695132.854 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:18:53.237Z,1520695133.237 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:18:53.634Z,1520695133.634 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:18:54.038Z,1520695134.038 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:18:54.436Z,1520695134.436 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:18:54.842Z,1520695134.842 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:18:55.236Z,1520695135.236 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:18:55.267Z,1520695135.267 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T15:18:55.267Z,1520695135.267 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 123
2018-03-10T15:18:55.267Z,1520695135.267 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-10T15:18:55.280Z,1520695135.280 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-10T15:18:55.636Z,1520695135.636 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:18:55.689Z,1520695135.689 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-10T15:18:55.689Z,1520695135.689 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 123
2018-03-10T15:18:56.037Z,1520695136.037 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:18:56.054Z,1520695136.054 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-10T15:18:56.071Z,1520695136.071 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-10T15:18:56.071Z,1520695136.071 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-10T15:18:56.441Z,1520695136.441 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:18:56.450Z,1520695136.450 [BPC1](FAULT): Failed to initialize
2018-03-10T15:18:56.450Z,1520695136.450 [BPC1] Communications Fault, FailCount= 4
2018-03-10T15:18:56.450Z,1520695136.450 [BPC1](ERROR): Communications Fault
2018-03-10T15:18:56.500Z,1520695136.500 [CBIT](ERROR): Communications Fault in component: BPC1
2018-03-10T15:18:56.845Z,1520695136.845 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:18:57.241Z,1520695137.241 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:18:57.645Z,1520695137.645 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:18:57.695Z,1520695137.695 [CBIT](INFO): Clearing failed state for component BPC1
2018-03-10T15:18:57.695Z,1520695137.695 [BPC1] No Fault, FailCount= 4
2018-03-10T15:18:58.043Z,1520695138.043 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:18:58.445Z,1520695138.445 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:18:58.842Z,1520695138.842 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:18:59.244Z,1520695139.244 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:18:59.634Z,1520695139.634 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:19:00.040Z,1520695140.040 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:19:00.448Z,1520695140.448 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:19:00.852Z,1520695140.852 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:19:01.235Z,1520695141.235 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:19:01.636Z,1520695141.636 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:19:02.035Z,1520695142.035 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:19:02.436Z,1520695142.436 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:19:02.835Z,1520695142.835 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:19:03.234Z,1520695143.234 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:19:03.660Z,1520695143.660 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:19:04.020Z,1520695144.020 [NAL9602](INFO): NAL9602 initialized
2018-03-10T15:19:04.037Z,1520695144.037 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:19:04.434Z,1520695144.434 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:19:04.820Z,1520695144.820 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-03-10T15:19:04.820Z,1520695144.820 [NAL9602] Data Fault, FailCount= 1
2018-03-10T15:19:04.820Z,1520695144.820 [NAL9602](ERROR): Data Fault
2018-03-10T15:19:04.837Z,1520695144.837 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:19:04.897Z,1520695144.897 [CBIT](ERROR): Data Fault in component: NAL9602
2018-03-10T15:19:05.220Z,1520695145.220 [NAL9602](INFO): Powering down
2018-03-10T15:19:05.237Z,1520695145.237 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:19:05.635Z,1520695145.635 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:19:06.040Z,1520695146.040 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:19:06.105Z,1520695146.105 [CBIT](INFO): Clearing failed state for component NAL9602
2018-03-10T15:19:06.105Z,1520695146.105 [NAL9602] No Fault, FailCount= 1
2018-03-10T15:19:09.279Z,1520695149.279 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:19:09.386Z,1520695149.386 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:19:09.750Z,1520695149.750 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:19:10.145Z,1520695150.145 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:19:10.544Z,1520695150.544 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:19:10.946Z,1520695150.946 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:19:11.348Z,1520695151.348 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:19:11.745Z,1520695151.745 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:19:12.149Z,1520695152.149 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:19:12.549Z,1520695152.549 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:19:12.949Z,1520695152.949 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:19:13.344Z,1520695153.344 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:19:13.745Z,1520695153.745 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:19:14.149Z,1520695154.149 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:19:14.549Z,1520695154.549 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:19:14.948Z,1520695154.948 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:19:15.345Z,1520695155.345 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:19:15.754Z,1520695155.754 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:19:16.149Z,1520695156.149 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:19:16.538Z,1520695156.538 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:19:16.956Z,1520695156.956 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:19:17.348Z,1520695157.348 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:19:17.750Z,1520695157.750 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:19:18.143Z,1520695158.143 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:19:18.544Z,1520695158.544 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:19:18.944Z,1520695158.944 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:19:19.340Z,1520695159.340 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:19:19.740Z,1520695159.740 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:19:20.140Z,1520695160.140 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:19:20.557Z,1520695160.557 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:19:20.940Z,1520695160.940 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:19:21.340Z,1520695161.340 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:19:21.740Z,1520695161.740 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:19:22.152Z,1520695162.152 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:19:22.541Z,1520695162.541 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:19:22.940Z,1520695162.940 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:19:23.340Z,1520695163.340 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:19:23.740Z,1520695163.740 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:19:24.140Z,1520695164.140 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:19:24.548Z,1520695164.548 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:19:24.945Z,1520695164.945 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:19:25.352Z,1520695165.352 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:19:25.744Z,1520695165.744 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:19:26.148Z,1520695166.148 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:19:26.546Z,1520695166.546 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:19:26.947Z,1520695166.947 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:19:27.348Z,1520695167.348 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:19:27.749Z,1520695167.749 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:19:28.148Z,1520695168.148 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:19:28.545Z,1520695168.545 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:19:28.948Z,1520695168.948 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:19:29.347Z,1520695169.347 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:19:29.745Z,1520695169.745 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:19:30.198Z,1520695170.198 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:19:30.547Z,1520695170.547 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:19:30.948Z,1520695170.948 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:19:31.346Z,1520695171.346 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:19:31.748Z,1520695171.748 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:19:32.148Z,1520695172.148 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:19:32.548Z,1520695172.548 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:19:32.949Z,1520695172.949 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:19:33.352Z,1520695173.352 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:19:33.748Z,1520695173.748 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:19:34.148Z,1520695174.148 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:19:34.552Z,1520695174.552 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:19:34.957Z,1520695174.957 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:19:35.324Z,1520695175.324 [NAL9602](INFO): Powering up NAL9602
2018-03-10T15:19:35.353Z,1520695175.353 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:19:35.748Z,1520695175.748 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:19:36.147Z,1520695176.147 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:19:36.552Z,1520695176.552 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:19:36.952Z,1520695176.952 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:19:37.340Z,1520695177.340 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:19:37.740Z,1520695177.740 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:19:38.140Z,1520695178.140 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:19:38.540Z,1520695178.540 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:19:38.956Z,1520695178.956 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:19:39.341Z,1520695179.341 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:19:39.742Z,1520695179.742 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:19:40.141Z,1520695180.141 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:19:40.538Z,1520695180.538 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:19:40.940Z,1520695180.940 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:19:41.340Z,1520695181.340 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:19:41.738Z,1520695181.738 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:19:42.140Z,1520695182.140 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:19:42.547Z,1520695182.547 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:19:42.948Z,1520695182.948 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:19:43.344Z,1520695183.344 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:19:43.745Z,1520695183.745 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:19:44.147Z,1520695184.147 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:19:44.549Z,1520695184.549 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:19:44.947Z,1520695184.947 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:19:45.349Z,1520695185.349 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:19:45.754Z,1520695185.754 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:19:46.124Z,1520695186.124 [NAL9602](INFO): NAL9602 initialized
2018-03-10T15:19:46.151Z,1520695186.151 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:19:46.549Z,1520695186.549 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:19:46.955Z,1520695186.955 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:19:47.355Z,1520695187.355 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:19:47.758Z,1520695187.758 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:19:48.151Z,1520695188.151 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:19:48.564Z,1520695188.564 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:19:48.959Z,1520695188.959 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:19:49.365Z,1520695189.365 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:19:49.737Z,1520695189.737 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:19:50.141Z,1520695190.141 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:19:50.541Z,1520695190.541 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:19:50.945Z,1520695190.945 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:19:51.337Z,1520695191.337 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:19:51.745Z,1520695191.745 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:19:52.145Z,1520695192.145 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:19:52.536Z,1520695192.536 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:19:52.940Z,1520695192.940 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:19:53.351Z,1520695193.351 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:19:53.758Z,1520695193.758 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:19:54.182Z,1520695194.182 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:19:54.559Z,1520695194.559 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:19:54.947Z,1520695194.947 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:19:55.348Z,1520695195.348 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:19:55.746Z,1520695195.746 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:19:56.147Z,1520695196.147 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:19:56.549Z,1520695196.549 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:19:56.948Z,1520695196.948 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:19:57.346Z,1520695197.346 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:19:57.749Z,1520695197.749 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:19:58.145Z,1520695198.145 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:19:58.554Z,1520695198.554 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:19:58.959Z,1520695198.959 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:19:59.360Z,1520695199.360 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:19:59.759Z,1520695199.759 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:20:00.141Z,1520695200.141 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:20:00.541Z,1520695200.541 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:20:00.941Z,1520695200.941 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:20:01.341Z,1520695201.341 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:20:01.741Z,1520695201.741 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:20:02.136Z,1520695202.136 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:20:02.540Z,1520695202.540 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:20:02.941Z,1520695202.941 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:20:03.336Z,1520695203.336 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:20:03.772Z,1520695203.772 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:20:04.164Z,1520695204.164 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:20:04.547Z,1520695204.547 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:20:04.964Z,1520695204.964 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:20:05.341Z,1520695205.341 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:20:05.741Z,1520695205.741 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:20:06.141Z,1520695206.141 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:20:09.412Z,1520695209.412 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:20:09.552Z,1520695209.552 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:20:09.903Z,1520695209.903 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:20:10.296Z,1520695210.296 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:20:10.690Z,1520695210.690 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:20:11.086Z,1520695211.086 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:20:11.486Z,1520695211.486 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:20:11.897Z,1520695211.897 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:20:12.286Z,1520695212.286 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:20:12.688Z,1520695212.688 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:20:13.094Z,1520695213.094 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:20:13.493Z,1520695213.493 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:20:13.881Z,1520695213.881 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:20:14.300Z,1520695214.300 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:20:14.700Z,1520695214.700 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:20:15.103Z,1520695215.103 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:20:15.488Z,1520695215.488 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:20:15.885Z,1520695215.885 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:20:16.285Z,1520695216.285 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:20:16.685Z,1520695216.685 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:20:17.084Z,1520695217.084 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:20:17.486Z,1520695217.486 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:20:17.894Z,1520695217.894 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:20:18.292Z,1520695218.292 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:20:18.689Z,1520695218.689 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:20:19.081Z,1520695219.081 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:20:19.498Z,1520695219.498 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:20:19.896Z,1520695219.896 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:20:20.300Z,1520695220.300 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:20:20.727Z,1520695220.727 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:20:21.081Z,1520695221.081 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:20:21.486Z,1520695221.486 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:20:21.884Z,1520695221.884 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:20:22.285Z,1520695222.285 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:20:22.685Z,1520695222.685 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:20:23.092Z,1520695223.092 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:20:23.481Z,1520695223.481 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:20:23.877Z,1520695223.877 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:20:24.281Z,1520695224.281 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:20:24.705Z,1520695224.705 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:20:25.096Z,1520695225.096 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:20:25.498Z,1520695225.498 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:20:25.891Z,1520695225.891 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:20:26.281Z,1520695226.281 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:20:26.682Z,1520695226.682 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:20:27.081Z,1520695227.081 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:20:27.485Z,1520695227.485 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:20:27.885Z,1520695227.885 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:20:28.293Z,1520695228.293 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:20:28.686Z,1520695228.686 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:20:29.090Z,1520695229.090 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:20:29.491Z,1520695229.491 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:20:29.891Z,1520695229.891 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:20:30.304Z,1520695230.304 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:20:30.695Z,1520695230.695 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:20:31.095Z,1520695231.095 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:20:31.499Z,1520695231.499 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:20:31.878Z,1520695231.878 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:20:32.281Z,1520695232.281 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:20:32.682Z,1520695232.682 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:20:33.076Z,1520695233.076 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:20:33.477Z,1520695233.477 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:20:33.881Z,1520695233.881 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:20:34.288Z,1520695234.288 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:20:34.689Z,1520695234.689 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:20:35.100Z,1520695235.100 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:20:35.499Z,1520695235.499 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:20:35.903Z,1520695235.903 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:20:36.303Z,1520695236.303 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:20:36.690Z,1520695236.690 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:20:37.093Z,1520695237.093 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:20:37.493Z,1520695237.493 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:20:37.890Z,1520695237.890 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:20:38.281Z,1520695238.281 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:20:38.681Z,1520695238.681 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:20:39.081Z,1520695239.081 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:20:39.481Z,1520695239.481 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:20:39.881Z,1520695239.881 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:20:40.295Z,1520695240.295 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:20:40.705Z,1520695240.705 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:20:41.109Z,1520695241.109 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:20:41.487Z,1520695241.487 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:20:41.887Z,1520695241.887 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:20:42.285Z,1520695242.285 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:20:42.686Z,1520695242.686 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:20:43.093Z,1520695243.093 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:20:43.489Z,1520695243.489 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:20:43.877Z,1520695243.877 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:20:44.277Z,1520695244.277 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:20:44.681Z,1520695244.681 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:20:45.077Z,1520695245.077 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:20:45.504Z,1520695245.504 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:20:45.904Z,1520695245.904 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:20:46.301Z,1520695246.301 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:20:46.705Z,1520695246.705 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:20:47.081Z,1520695247.081 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:20:47.482Z,1520695247.482 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:20:47.886Z,1520695247.886 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:20:48.286Z,1520695248.286 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:20:48.685Z,1520695248.685 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:20:49.088Z,1520695249.088 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:20:49.493Z,1520695249.493 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:20:49.877Z,1520695249.877 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:20:50.281Z,1520695250.281 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:20:50.704Z,1520695250.704 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:20:51.100Z,1520695251.100 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:20:51.500Z,1520695251.500 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:20:51.891Z,1520695251.891 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:20:52.281Z,1520695252.281 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:20:52.681Z,1520695252.681 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:20:53.086Z,1520695253.086 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:20:53.489Z,1520695253.489 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:20:53.883Z,1520695253.883 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:20:54.285Z,1520695254.285 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:20:54.689Z,1520695254.689 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:20:55.089Z,1520695255.089 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:20:55.486Z,1520695255.486 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:20:55.899Z,1520695255.899 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:20:56.303Z,1520695256.303 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:20:56.703Z,1520695256.703 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:20:57.095Z,1520695257.095 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:20:57.491Z,1520695257.491 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:20:57.888Z,1520695257.888 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:20:58.290Z,1520695258.290 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:20:58.693Z,1520695258.693 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:20:59.088Z,1520695259.088 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:20:59.476Z,1520695259.476 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:20:59.893Z,1520695259.893 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:21:00.282Z,1520695260.282 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:21:00.677Z,1520695260.677 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:21:01.100Z,1520695261.100 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:21:01.500Z,1520695261.500 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:21:01.904Z,1520695261.904 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:21:02.296Z,1520695262.296 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:21:02.680Z,1520695262.680 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:21:03.076Z,1520695263.076 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:21:03.481Z,1520695263.481 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:21:03.886Z,1520695263.886 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:21:04.289Z,1520695264.289 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:21:04.683Z,1520695264.683 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:21:05.086Z,1520695265.086 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:21:05.483Z,1520695265.483 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:21:05.893Z,1520695265.893 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:21:05.959Z,1520695265.959 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-03-10T15:16:05.7Z
2018-03-10T15:21:05.959Z,1520695265.959 [Default:CheckIn:Read_GPS] Stopped
2018-03-10T15:21:05.959Z,1520695265.959 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-03-10T15:21:06.300Z,1520695266.300 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:21:09.608Z,1520695269.608 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:21:09.763Z,1520695269.763 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:21:10.094Z,1520695270.094 [DataOverHttps](INFO): Sending 69 bytes from file Logs/20180310T051512/Courier0236.lzma
2018-03-10T15:21:10.132Z,1520695270.132 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:21:10.509Z,1520695270.509 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:21:10.885Z,1520695270.885 [DataOverHttps](INFO): Moved sent file to Logs/20180310T051512/Courier0236.lzma.bak
2018-03-10T15:21:10.886Z,1520695270.886 [DataOverHttps](INFO): SBD MOMSN=8005679
2018-03-10T15:21:10.926Z,1520695270.926 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:21:11.612Z,1520695271.612 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:21:11.722Z,1520695271.722 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:21:12.124Z,1520695272.124 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:21:15.309Z,1520695275.309 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:21:15.436Z,1520695275.436 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:21:15.795Z,1520695275.795 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:21:16.187Z,1520695276.187 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:21:16.585Z,1520695276.585 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:21:16.978Z,1520695276.978 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:21:17.389Z,1520695277.389 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:21:20.636Z,1520695280.636 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:21:20.781Z,1520695280.781 [DataOverHttps](INFO): Sending 282 bytes from file Logs/20180310T051512/Express0237.lzma
2018-03-10T15:21:20.815Z,1520695280.815 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:21:21.197Z,1520695281.197 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:21:21.549Z,1520695281.549 [DataOverHttps](INFO): Moved sent file to Logs/20180310T051512/Express0237.lzma.bak
2018-03-10T15:21:21.550Z,1520695281.550 [DataOverHttps](INFO): SBD MOMSN=8005682
2018-03-10T15:21:21.605Z,1520695281.605 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:21:22.252Z,1520695282.252 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:21:22.273Z,1520695282.273 [Default:CheckIn:Read_Iridium] Stopped
2018-03-10T15:21:22.273Z,1520695282.273 [Default:CheckIn:C.Wait] Running Loop=1
2018-03-10T15:21:22.273Z,1520695282.273 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-03-10T15:21:22.375Z,1520695282.375 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:21:22.771Z,1520695282.771 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:21:26.067Z,1520695286.067 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session.
2018-03-10T15:21:26.084Z,1520695286.084 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:21:26.208Z,1520695286.208 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:21:26.576Z,1520695286.576 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:21:26.972Z,1520695286.972 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:21:27.368Z,1520695287.368 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:21:27.773Z,1520695287.773 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:21:28.172Z,1520695288.172 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:21:28.574Z,1520695288.574 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:21:28.970Z,1520695288.970 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:21:29.376Z,1520695289.376 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:21:29.776Z,1520695289.776 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:21:30.172Z,1520695290.172 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:21:30.581Z,1520695290.581 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:21:30.972Z,1520695290.972 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:21:31.372Z,1520695291.372 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:21:31.771Z,1520695291.771 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:21:32.173Z,1520695292.173 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:21:32.578Z,1520695292.578 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:21:32.960Z,1520695292.960 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:21:33.360Z,1520695293.360 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:21:33.764Z,1520695293.764 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:21:34.160Z,1520695294.160 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:21:34.569Z,1520695294.569 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:21:34.964Z,1520695294.964 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:21:35.360Z,1520695295.360 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:21:35.762Z,1520695295.762 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:21:36.167Z,1520695296.167 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:21:36.564Z,1520695296.564 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:21:36.972Z,1520695296.972 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:21:37.366Z,1520695297.366 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:21:37.764Z,1520695297.764 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:21:38.165Z,1520695298.165 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:21:38.565Z,1520695298.565 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:21:38.965Z,1520695298.965 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:21:39.360Z,1520695299.360 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:21:39.768Z,1520695299.768 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:21:40.168Z,1520695300.168 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:21:40.571Z,1520695300.571 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:21:40.973Z,1520695300.973 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:21:41.372Z,1520695301.372 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:21:41.768Z,1520695301.768 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:21:42.176Z,1520695302.176 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:21:42.565Z,1520695302.565 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:21:42.971Z,1520695302.971 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:21:43.372Z,1520695303.372 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:21:43.769Z,1520695303.769 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:21:44.168Z,1520695304.168 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:21:44.573Z,1520695304.573 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:21:44.968Z,1520695304.968 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:21:45.360Z,1520695305.360 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:21:45.764Z,1520695305.764 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:21:46.163Z,1520695306.163 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:21:46.564Z,1520695306.564 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:21:46.964Z,1520695306.964 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:21:47.376Z,1520695307.376 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:21:47.764Z,1520695307.764 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:21:48.165Z,1520695308.165 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:21:48.607Z,1520695308.607 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:21:48.965Z,1520695308.965 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:21:49.376Z,1520695309.376 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:21:49.765Z,1520695309.765 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:21:50.165Z,1520695310.165 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:21:50.564Z,1520695310.564 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:21:50.965Z,1520695310.965 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:21:51.368Z,1520695311.368 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:21:51.764Z,1520695311.764 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:21:52.168Z,1520695312.168 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:21:52.562Z,1520695312.562 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:21:52.964Z,1520695312.964 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:21:53.368Z,1520695313.368 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:21:53.768Z,1520695313.768 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:21:54.172Z,1520695314.172 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:21:54.569Z,1520695314.569 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:21:54.973Z,1520695314.973 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:21:55.371Z,1520695315.371 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:21:55.773Z,1520695315.773 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:21:56.172Z,1520695316.172 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:21:56.196Z,1520695316.196 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T15:21:56.197Z,1520695316.197 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 124
2018-03-10T15:21:56.197Z,1520695316.197 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-10T15:21:56.225Z,1520695316.225 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-10T15:21:56.548Z,1520695316.548 [NAL9602](INFO): Powering down
2018-03-10T15:21:56.570Z,1520695316.570 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:21:56.630Z,1520695316.630 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-10T15:21:56.630Z,1520695316.630 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 124
2018-03-10T15:21:56.972Z,1520695316.972 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:21:56.995Z,1520695316.995 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-10T15:21:56.996Z,1520695316.996 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-10T15:21:56.996Z,1520695316.996 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-10T15:21:57.371Z,1520695317.371 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:21:57.776Z,1520695317.776 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:21:58.184Z,1520695318.184 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:21:58.567Z,1520695318.567 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:21:58.964Z,1520695318.964 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:21:59.368Z,1520695319.368 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:21:59.764Z,1520695319.764 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:22:00.160Z,1520695320.160 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:22:00.565Z,1520695320.565 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:22:00.963Z,1520695320.963 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:22:01.364Z,1520695321.364 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:22:01.769Z,1520695321.769 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:22:02.171Z,1520695322.171 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:22:02.569Z,1520695322.569 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:22:02.980Z,1520695322.980 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:22:03.376Z,1520695323.376 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:22:03.780Z,1520695323.780 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:22:04.169Z,1520695324.169 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:22:04.569Z,1520695324.569 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:22:04.968Z,1520695324.968 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:22:05.371Z,1520695325.371 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:22:05.773Z,1520695325.773 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:22:06.173Z,1520695326.173 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:22:06.576Z,1520695326.576 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:22:06.972Z,1520695326.972 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:22:07.372Z,1520695327.372 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:22:07.770Z,1520695327.770 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:22:08.160Z,1520695328.160 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:22:08.573Z,1520695328.573 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:22:08.972Z,1520695328.972 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:22:09.371Z,1520695329.371 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:22:09.773Z,1520695329.773 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:22:10.184Z,1520695330.184 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:22:10.560Z,1520695330.560 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:22:10.964Z,1520695330.964 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:22:11.375Z,1520695331.375 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:22:11.764Z,1520695331.764 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:22:12.165Z,1520695332.165 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:22:12.564Z,1520695332.564 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:22:12.968Z,1520695332.968 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:22:13.364Z,1520695333.364 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:22:13.767Z,1520695333.767 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:22:14.164Z,1520695334.164 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:22:14.564Z,1520695334.564 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:22:14.964Z,1520695334.964 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:22:15.363Z,1520695335.363 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:22:15.764Z,1520695335.764 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:22:16.170Z,1520695336.170 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:22:16.570Z,1520695336.570 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:22:16.976Z,1520695336.976 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:22:17.366Z,1520695337.366 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:22:17.770Z,1520695337.770 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:22:18.173Z,1520695338.173 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:22:18.572Z,1520695338.572 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:22:18.974Z,1520695338.974 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:22:19.372Z,1520695339.372 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:22:19.772Z,1520695339.772 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:22:20.172Z,1520695340.172 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:22:20.567Z,1520695340.567 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:22:20.972Z,1520695340.972 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:22:21.372Z,1520695341.372 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:22:21.772Z,1520695341.772 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:22:22.168Z,1520695342.168 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:22:22.572Z,1520695342.572 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:22:22.974Z,1520695342.974 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:22:26.176Z,1520695346.176 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:22:26.295Z,1520695346.295 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:22:26.653Z,1520695346.653 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:22:27.041Z,1520695347.041 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:22:27.448Z,1520695347.448 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:22:27.856Z,1520695347.856 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:22:28.249Z,1520695348.249 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:22:28.644Z,1520695348.644 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:22:29.049Z,1520695349.049 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:22:29.434Z,1520695349.434 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:22:29.854Z,1520695349.854 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:22:30.241Z,1520695350.241 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:22:30.636Z,1520695350.636 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:22:31.040Z,1520695351.040 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:22:31.444Z,1520695351.444 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:22:31.842Z,1520695351.842 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:22:32.240Z,1520695352.240 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:22:32.641Z,1520695352.641 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:22:33.045Z,1520695353.045 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:22:33.444Z,1520695353.444 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:22:33.845Z,1520695353.845 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:22:34.244Z,1520695354.244 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:22:34.649Z,1520695354.649 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:22:35.044Z,1520695355.044 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:22:35.437Z,1520695355.437 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:22:35.841Z,1520695355.841 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:22:36.240Z,1520695356.240 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:22:36.644Z,1520695356.644 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:22:37.045Z,1520695357.045 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:22:37.444Z,1520695357.444 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:22:37.849Z,1520695357.849 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:22:38.248Z,1520695358.248 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:22:38.648Z,1520695358.648 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:22:39.043Z,1520695359.043 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:22:39.453Z,1520695359.453 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:22:39.849Z,1520695359.849 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:22:40.236Z,1520695360.236 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:22:40.652Z,1520695360.652 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:22:41.048Z,1520695361.048 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:22:41.444Z,1520695361.444 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:22:41.836Z,1520695361.836 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:22:42.244Z,1520695362.244 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:22:42.644Z,1520695362.644 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:22:43.048Z,1520695363.048 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:22:43.443Z,1520695363.443 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:22:43.841Z,1520695363.841 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:22:44.240Z,1520695364.240 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:22:44.640Z,1520695364.640 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:22:45.035Z,1520695365.035 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:22:45.444Z,1520695365.444 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:22:45.841Z,1520695365.841 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:22:46.244Z,1520695366.244 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:22:46.649Z,1520695366.649 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:22:47.048Z,1520695367.048 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:22:47.445Z,1520695367.445 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:22:47.848Z,1520695367.848 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:22:48.249Z,1520695368.249 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:22:48.640Z,1520695368.640 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:22:49.060Z,1520695369.060 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:22:49.440Z,1520695369.440 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:22:49.844Z,1520695369.844 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:22:50.241Z,1520695370.241 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:22:50.657Z,1520695370.657 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:22:51.050Z,1520695371.050 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:22:51.446Z,1520695371.446 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:22:51.853Z,1520695371.853 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:22:52.236Z,1520695372.236 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:22:52.641Z,1520695372.641 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:22:53.045Z,1520695373.045 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:22:53.444Z,1520695373.444 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:22:53.845Z,1520695373.845 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:22:54.240Z,1520695374.240 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:22:54.636Z,1520695374.636 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:22:55.042Z,1520695375.042 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:22:55.452Z,1520695375.452 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:22:55.840Z,1520695375.840 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:22:56.246Z,1520695376.246 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:22:56.646Z,1520695376.646 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:22:57.045Z,1520695377.045 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:22:57.440Z,1520695377.440 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:22:57.858Z,1520695377.858 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:22:58.240Z,1520695378.240 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:22:58.645Z,1520695378.645 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:22:59.040Z,1520695379.040 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:22:59.439Z,1520695379.439 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:22:59.841Z,1520695379.841 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:23:00.252Z,1520695380.252 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:23:00.646Z,1520695380.646 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:23:01.048Z,1520695381.048 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:23:01.452Z,1520695381.452 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:23:01.846Z,1520695381.846 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:23:02.246Z,1520695382.246 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:23:02.654Z,1520695382.654 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:23:03.049Z,1520695383.049 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:23:03.441Z,1520695383.441 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:23:03.845Z,1520695383.845 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:23:04.240Z,1520695384.240 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:23:04.636Z,1520695384.636 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:23:05.040Z,1520695385.040 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:23:05.436Z,1520695385.436 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:23:05.840Z,1520695385.841 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:23:06.240Z,1520695386.240 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:23:06.648Z,1520695386.648 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:23:07.048Z,1520695387.048 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:23:07.446Z,1520695387.446 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:23:07.850Z,1520695387.850 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:23:08.245Z,1520695388.245 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:23:08.646Z,1520695388.646 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:23:09.044Z,1520695389.044 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:23:09.441Z,1520695389.441 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:23:09.839Z,1520695389.839 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:23:10.236Z,1520695390.236 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:23:10.635Z,1520695390.635 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:23:11.040Z,1520695391.040 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:23:11.444Z,1520695391.444 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:23:11.848Z,1520695391.848 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:23:12.256Z,1520695392.256 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:23:12.639Z,1520695392.639 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:23:13.044Z,1520695393.044 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:23:13.448Z,1520695393.448 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:23:13.836Z,1520695393.836 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:23:14.236Z,1520695394.236 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:23:14.651Z,1520695394.651 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:23:15.036Z,1520695395.036 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:23:15.452Z,1520695395.452 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:23:15.841Z,1520695395.841 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:23:16.240Z,1520695396.240 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:23:16.640Z,1520695396.640 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:23:17.048Z,1520695397.048 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:23:17.448Z,1520695397.448 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:23:17.838Z,1520695397.838 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:23:18.252Z,1520695398.252 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:23:18.636Z,1520695398.636 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:23:19.045Z,1520695399.045 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:23:19.440Z,1520695399.440 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:23:19.839Z,1520695399.839 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:23:20.236Z,1520695400.236 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:23:20.639Z,1520695400.639 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:23:21.040Z,1520695401.040 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:23:21.436Z,1520695401.436 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:23:21.844Z,1520695401.844 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:23:22.236Z,1520695402.236 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:23:22.640Z,1520695402.640 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:23:23.056Z,1520695403.056 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:23:26.298Z,1520695406.298 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:23:26.436Z,1520695406.436 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:23:26.822Z,1520695406.822 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:23:27.216Z,1520695407.216 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:23:27.620Z,1520695407.620 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:23:28.016Z,1520695408.016 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:23:28.417Z,1520695408.417 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:23:28.819Z,1520695408.819 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:23:29.216Z,1520695409.216 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:23:29.616Z,1520695409.616 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:23:30.016Z,1520695410.016 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:23:30.428Z,1520695410.428 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:23:30.817Z,1520695410.817 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:23:31.208Z,1520695411.208 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:23:31.609Z,1520695411.609 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:23:32.008Z,1520695412.008 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:23:32.406Z,1520695412.406 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:23:32.812Z,1520695412.812 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:23:33.209Z,1520695413.209 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:23:33.625Z,1520695413.625 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:23:34.008Z,1520695414.008 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:23:34.408Z,1520695414.408 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:23:34.812Z,1520695414.812 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:23:35.225Z,1520695415.225 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:23:35.612Z,1520695415.612 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:23:36.008Z,1520695416.008 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:23:36.416Z,1520695416.416 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:23:36.808Z,1520695416.808 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:23:37.208Z,1520695417.208 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:23:37.612Z,1520695417.612 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:23:38.009Z,1520695418.009 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:23:38.408Z,1520695418.408 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:23:38.819Z,1520695418.819 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:23:39.208Z,1520695419.208 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:23:39.612Z,1520695419.612 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:23:40.015Z,1520695420.015 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:23:40.413Z,1520695420.413 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:23:40.815Z,1520695420.815 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:23:41.217Z,1520695421.217 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:23:41.616Z,1520695421.616 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:23:42.016Z,1520695422.016 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:23:42.416Z,1520695422.416 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:23:42.820Z,1520695422.820 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:23:43.216Z,1520695423.216 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:23:43.616Z,1520695423.616 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:23:44.016Z,1520695424.016 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:23:44.420Z,1520695424.420 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:23:44.824Z,1520695424.824 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:23:45.208Z,1520695425.208 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:23:45.606Z,1520695425.606 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:23:46.016Z,1520695426.016 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:23:46.452Z,1520695426.452 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:23:46.830Z,1520695426.830 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:23:47.219Z,1520695427.219 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:23:47.619Z,1520695427.619 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:23:48.018Z,1520695428.018 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:23:48.408Z,1520695428.408 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:23:48.807Z,1520695428.807 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:23:49.232Z,1520695429.232 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:23:49.618Z,1520695429.618 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:23:50.017Z,1520695430.017 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:23:50.417Z,1520695430.417 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:23:50.821Z,1520695430.821 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:23:51.221Z,1520695431.221 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:23:51.625Z,1520695431.625 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:23:52.020Z,1520695432.020 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:23:52.424Z,1520695432.424 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:23:52.821Z,1520695432.821 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:23:53.212Z,1520695433.212 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:23:53.622Z,1520695433.622 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:23:54.015Z,1520695434.015 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:23:54.424Z,1520695434.424 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:23:54.808Z,1520695434.808 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:23:55.208Z,1520695435.208 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:23:55.630Z,1520695435.630 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:23:56.009Z,1520695436.009 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:23:56.409Z,1520695436.409 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:23:56.825Z,1520695436.825 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:23:57.209Z,1520695437.209 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:23:57.609Z,1520695437.609 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:23:58.008Z,1520695438.008 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:23:58.405Z,1520695438.405 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:23:58.808Z,1520695438.808 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:23:59.216Z,1520695439.216 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:23:59.616Z,1520695439.616 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:24:00.016Z,1520695440.016 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:24:00.415Z,1520695440.415 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:24:00.816Z,1520695440.816 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:24:01.218Z,1520695441.218 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:24:01.617Z,1520695441.617 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:24:02.014Z,1520695442.014 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:24:02.412Z,1520695442.412 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:24:02.815Z,1520695442.815 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:24:03.217Z,1520695443.217 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:24:03.620Z,1520695443.620 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:24:04.021Z,1520695444.021 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:24:04.420Z,1520695444.420 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:24:04.820Z,1520695444.820 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:24:05.217Z,1520695445.217 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:24:05.612Z,1520695445.612 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:24:06.020Z,1520695446.020 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:24:06.415Z,1520695446.415 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:24:06.820Z,1520695446.820 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:24:07.208Z,1520695447.208 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:24:07.612Z,1520695447.612 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:24:08.008Z,1520695448.008 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:24:08.409Z,1520695448.409 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:24:08.808Z,1520695448.808 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:24:09.208Z,1520695449.208 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:24:09.604Z,1520695449.604 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:24:10.009Z,1520695450.009 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:24:10.408Z,1520695450.408 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:24:10.806Z,1520695450.806 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:24:11.208Z,1520695451.208 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:24:11.612Z,1520695451.612 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:24:12.017Z,1520695452.017 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:24:12.416Z,1520695452.416 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:24:12.817Z,1520695452.817 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:24:13.217Z,1520695453.217 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:24:13.617Z,1520695453.617 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:24:14.017Z,1520695454.017 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:24:14.416Z,1520695454.416 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:24:14.817Z,1520695454.817 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:24:15.216Z,1520695455.216 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:24:15.616Z,1520695455.616 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:24:16.025Z,1520695456.025 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:24:16.410Z,1520695456.410 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:24:16.808Z,1520695456.808 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:24:17.209Z,1520695457.209 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:24:17.610Z,1520695457.610 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:24:18.009Z,1520695458.009 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:24:18.410Z,1520695458.410 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:24:18.812Z,1520695458.812 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:24:19.212Z,1520695459.212 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:24:19.610Z,1520695459.610 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:24:20.013Z,1520695460.013 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:24:20.408Z,1520695460.408 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:24:20.820Z,1520695460.820 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:24:21.209Z,1520695461.209 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:24:21.621Z,1520695461.621 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:24:22.015Z,1520695462.015 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:24:22.415Z,1520695462.415 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:24:22.816Z,1520695462.816 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:24:23.224Z,1520695463.224 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:24:26.422Z,1520695466.422 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:24:26.526Z,1520695466.526 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:24:26.897Z,1520695466.897 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:24:27.290Z,1520695467.290 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:24:27.694Z,1520695467.694 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:24:28.100Z,1520695468.100 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:24:28.494Z,1520695468.494 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:24:28.893Z,1520695468.893 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:24:29.292Z,1520695469.292 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:24:29.693Z,1520695469.693 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:24:30.087Z,1520695470.087 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:24:30.489Z,1520695470.489 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:24:30.896Z,1520695470.896 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:24:31.292Z,1520695471.292 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:24:31.691Z,1520695471.691 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:24:32.089Z,1520695472.089 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:24:32.496Z,1520695472.496 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:24:32.889Z,1520695472.889 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:24:33.292Z,1520695473.292 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:24:33.688Z,1520695473.688 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:24:34.092Z,1520695474.092 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:24:34.500Z,1520695474.500 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:24:34.892Z,1520695474.892 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:24:35.304Z,1520695475.304 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:24:35.697Z,1520695475.697 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:24:36.092Z,1520695476.092 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:24:36.491Z,1520695476.491 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:24:36.896Z,1520695476.896 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:24:37.280Z,1520695477.280 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:24:37.691Z,1520695477.691 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:24:38.087Z,1520695478.087 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:24:38.496Z,1520695478.496 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:24:38.884Z,1520695478.884 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:24:39.301Z,1520695479.301 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:24:39.683Z,1520695479.683 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:24:40.084Z,1520695480.084 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:24:40.484Z,1520695480.484 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:24:40.884Z,1520695480.884 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:24:41.286Z,1520695481.286 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:24:41.685Z,1520695481.685 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:24:42.085Z,1520695482.085 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:24:42.484Z,1520695482.484 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:24:42.898Z,1520695482.898 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:24:43.284Z,1520695483.284 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:24:43.680Z,1520695483.680 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:24:44.096Z,1520695484.096 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:24:44.480Z,1520695484.480 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:24:44.897Z,1520695484.897 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:24:45.285Z,1520695485.285 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:24:45.680Z,1520695485.680 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:24:46.085Z,1520695486.085 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:24:46.482Z,1520695486.482 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:24:46.885Z,1520695486.885 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:24:47.305Z,1520695487.305 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:24:47.682Z,1520695487.682 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:24:48.084Z,1520695488.084 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:24:48.480Z,1520695488.480 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:24:48.888Z,1520695488.888 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:24:49.301Z,1520695489.301 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:24:49.684Z,1520695489.684 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:24:50.084Z,1520695490.084 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:24:50.480Z,1520695490.480 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:24:50.881Z,1520695490.881 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:24:51.285Z,1520695491.285 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:24:51.692Z,1520695491.692 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:24:52.092Z,1520695492.092 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:24:52.493Z,1520695492.493 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:24:52.889Z,1520695492.889 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:24:53.292Z,1520695493.292 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:24:53.692Z,1520695493.692 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:24:54.086Z,1520695494.086 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:24:54.492Z,1520695494.492 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:24:54.891Z,1520695494.891 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:24:55.293Z,1520695495.293 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:24:55.696Z,1520695495.696 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:24:56.086Z,1520695496.086 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:24:56.480Z,1520695496.480 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:24:56.884Z,1520695496.884 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:24:57.280Z,1520695497.280 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:24:57.318Z,1520695497.318 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T15:24:57.318Z,1520695497.318 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 125
2018-03-10T15:24:57.318Z,1520695497.318 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-10T15:24:57.330Z,1520695497.330 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-10T15:24:57.680Z,1520695497.680 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:24:57.739Z,1520695497.739 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-10T15:24:57.739Z,1520695497.739 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 125
2018-03-10T15:24:58.080Z,1520695498.080 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:24:58.121Z,1520695498.121 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-10T15:24:58.122Z,1520695498.122 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-10T15:24:58.122Z,1520695498.122 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-10T15:24:58.488Z,1520695498.488 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:24:58.892Z,1520695498.892 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:24:59.292Z,1520695499.292 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:24:59.300Z,1520695499.300 [BPC1](ERROR): Failed to receive battery data
2018-03-10T15:24:59.301Z,1520695499.301 [BPC1] Communications Fault, FailCount= 1
2018-03-10T15:24:59.301Z,1520695499.301 [BPC1](ERROR): Communications Fault
2018-03-10T15:24:59.363Z,1520695499.363 [CBIT](ERROR): Communications Fault in component: BPC1
2018-03-10T15:24:59.691Z,1520695499.691 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:25:00.094Z,1520695500.094 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:25:00.492Z,1520695500.492 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:25:00.521Z,1520695500.521 [CBIT](INFO): Clearing failed state for component BPC1
2018-03-10T15:25:00.521Z,1520695500.521 [BPC1] No Fault, FailCount= 1
2018-03-10T15:25:00.892Z,1520695500.892 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:25:01.301Z,1520695501.301 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:25:01.690Z,1520695501.690 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:25:02.088Z,1520695502.088 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:25:02.488Z,1520695502.488 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:25:02.896Z,1520695502.896 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:25:03.287Z,1520695503.287 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:25:03.690Z,1520695503.690 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:25:04.096Z,1520695504.096 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:25:04.489Z,1520695504.489 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:25:04.896Z,1520695504.896 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:25:05.293Z,1520695505.293 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:25:05.681Z,1520695505.681 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:25:06.104Z,1520695506.104 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:25:06.504Z,1520695506.504 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:25:06.896Z,1520695506.896 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:25:07.294Z,1520695507.294 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:25:07.704Z,1520695507.704 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:25:08.092Z,1520695508.092 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:25:08.500Z,1520695508.500 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:25:08.888Z,1520695508.888 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:25:09.292Z,1520695509.292 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:25:09.688Z,1520695509.688 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:25:10.092Z,1520695510.092 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:25:10.492Z,1520695510.492 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:25:10.888Z,1520695510.888 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:25:11.288Z,1520695511.288 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:25:11.696Z,1520695511.696 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:25:12.085Z,1520695512.085 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:25:12.504Z,1520695512.504 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:25:12.879Z,1520695512.879 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:25:13.284Z,1520695513.284 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:25:13.704Z,1520695513.704 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:25:14.083Z,1520695514.083 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:25:14.485Z,1520695514.485 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:25:14.905Z,1520695514.905 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:25:15.281Z,1520695515.281 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:25:15.686Z,1520695515.686 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:25:16.084Z,1520695516.084 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:25:16.484Z,1520695516.484 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:25:16.886Z,1520695516.886 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:25:17.285Z,1520695517.285 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:25:17.685Z,1520695517.685 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:25:18.089Z,1520695518.089 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:25:18.485Z,1520695518.485 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:25:18.884Z,1520695518.884 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:25:19.283Z,1520695519.283 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:25:19.692Z,1520695519.692 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:25:20.084Z,1520695520.084 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:25:20.484Z,1520695520.484 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:25:20.888Z,1520695520.888 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:25:21.284Z,1520695521.284 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:25:21.689Z,1520695521.689 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:25:22.084Z,1520695522.084 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:25:22.484Z,1520695522.484 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:25:22.888Z,1520695522.888 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:25:23.296Z,1520695523.296 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:25:26.541Z,1520695526.541 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:25:26.652Z,1520695526.652 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:25:27.056Z,1520695527.056 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:25:27.440Z,1520695527.440 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:25:27.857Z,1520695527.857 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:25:28.248Z,1520695528.248 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:25:28.640Z,1520695528.640 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:25:29.041Z,1520695529.041 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:25:29.445Z,1520695529.445 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:25:29.840Z,1520695529.840 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:25:30.240Z,1520695530.240 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:25:30.640Z,1520695530.640 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:25:31.039Z,1520695531.039 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:25:31.448Z,1520695531.448 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:25:31.841Z,1520695531.841 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:25:32.241Z,1520695532.241 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:25:32.645Z,1520695532.645 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:25:33.050Z,1520695533.050 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:25:33.448Z,1520695533.448 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:25:33.841Z,1520695533.841 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:25:34.239Z,1520695534.239 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:25:34.636Z,1520695534.636 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:25:35.046Z,1520695535.046 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:25:35.440Z,1520695535.440 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:25:35.840Z,1520695535.840 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:25:36.240Z,1520695536.240 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:25:36.646Z,1520695536.646 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:25:37.049Z,1520695537.049 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:25:37.445Z,1520695537.445 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:25:37.850Z,1520695537.850 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:25:38.252Z,1520695538.252 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:25:38.640Z,1520695538.640 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:25:39.041Z,1520695539.041 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:25:39.436Z,1520695539.436 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:25:39.845Z,1520695539.845 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:25:40.260Z,1520695540.260 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:25:40.290Z,1520695540.290 [CBIT](DEBUG): EFC running - data check-sum false
2018-03-10T15:25:40.641Z,1520695540.641 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:25:41.045Z,1520695541.045 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:25:41.450Z,1520695541.450 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:25:41.845Z,1520695541.845 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:25:42.252Z,1520695542.252 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:25:42.642Z,1520695542.642 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:25:43.052Z,1520695543.052 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:25:43.444Z,1520695543.444 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:25:43.861Z,1520695543.861 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:25:44.236Z,1520695544.236 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:25:44.641Z,1520695544.641 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:25:45.040Z,1520695545.040 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:25:45.058Z,1520695545.058 [BPC1](ERROR): Bank B: No match for stick 0 serial number:1717 in the onboard configuration file.
2018-03-10T15:25:45.058Z,1520695545.058 [BPC1](ERROR): Failed to parse Bank B battery data
2018-03-10T15:25:45.058Z,1520695545.058 [BPC1] Data Fault, FailCount= 1
2018-03-10T15:25:45.058Z,1520695545.058 [BPC1](ERROR): Data Fault
2018-03-10T15:25:45.116Z,1520695545.116 [CBIT](ERROR): Data Fault in component: BPC1
2018-03-10T15:25:45.440Z,1520695545.440 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:25:45.848Z,1520695545.848 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:25:46.272Z,1520695546.272 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:25:46.343Z,1520695546.343 [CBIT](INFO): Clearing failed state for component BPC1
2018-03-10T15:25:46.343Z,1520695546.343 [BPC1] No Fault, FailCount= 1
2018-03-10T15:25:46.666Z,1520695546.666 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:25:47.039Z,1520695547.039 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:25:47.442Z,1520695547.442 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:25:47.843Z,1520695547.843 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:25:48.247Z,1520695548.247 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:25:48.649Z,1520695548.649 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:25:49.048Z,1520695549.048 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:25:49.449Z,1520695549.449 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:25:49.842Z,1520695549.842 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:25:50.242Z,1520695550.242 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:25:50.640Z,1520695550.640 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:25:51.051Z,1520695551.051 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:25:51.436Z,1520695551.436 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:25:51.838Z,1520695551.838 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:25:52.248Z,1520695552.248 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:25:52.648Z,1520695552.648 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:25:53.046Z,1520695553.046 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:25:53.449Z,1520695553.449 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:25:53.852Z,1520695553.852 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:25:54.249Z,1520695554.249 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:25:54.644Z,1520695554.644 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:25:55.044Z,1520695555.044 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:25:55.444Z,1520695555.444 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:25:55.860Z,1520695555.860 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:25:56.237Z,1520695556.237 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:25:56.638Z,1520695556.638 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:25:57.040Z,1520695557.040 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:25:57.436Z,1520695557.436 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:25:57.838Z,1520695557.838 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:25:58.241Z,1520695558.241 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:25:58.640Z,1520695558.640 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:25:59.036Z,1520695559.036 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:25:59.440Z,1520695559.440 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:25:59.842Z,1520695559.842 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:26:00.240Z,1520695560.240 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:26:00.639Z,1520695560.639 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:26:01.040Z,1520695561.040 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:26:01.445Z,1520695561.445 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:26:01.850Z,1520695561.850 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:26:02.242Z,1520695562.242 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:26:02.646Z,1520695562.646 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:26:03.048Z,1520695563.048 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:26:03.445Z,1520695563.445 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:26:03.837Z,1520695563.837 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:26:04.244Z,1520695564.244 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:26:04.636Z,1520695564.636 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:26:05.058Z,1520695565.058 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:26:05.440Z,1520695565.440 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:26:05.840Z,1520695565.840 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:26:06.240Z,1520695566.240 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:26:06.648Z,1520695566.648 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:26:07.044Z,1520695567.044 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:26:07.444Z,1520695567.444 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:26:07.856Z,1520695567.856 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:26:08.240Z,1520695568.240 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:26:08.634Z,1520695568.634 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:26:09.040Z,1520695569.040 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:26:09.436Z,1520695569.436 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:26:09.840Z,1520695569.840 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:26:10.241Z,1520695570.241 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:26:10.641Z,1520695570.641 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:26:11.045Z,1520695571.045 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:26:11.444Z,1520695571.444 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:26:11.853Z,1520695571.853 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:26:12.250Z,1520695572.250 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:26:12.650Z,1520695572.650 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:26:13.048Z,1520695573.048 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:26:13.440Z,1520695573.440 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:26:13.841Z,1520695573.841 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:26:14.248Z,1520695574.248 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:26:14.636Z,1520695574.636 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:26:15.053Z,1520695575.053 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:26:15.440Z,1520695575.440 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:26:15.841Z,1520695575.841 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:26:16.248Z,1520695576.248 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:26:16.641Z,1520695576.641 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:26:17.037Z,1520695577.037 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:26:17.452Z,1520695577.452 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:26:17.849Z,1520695577.849 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:26:18.241Z,1520695578.241 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:26:18.645Z,1520695578.645 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:26:19.040Z,1520695579.040 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:26:19.445Z,1520695579.445 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:26:19.848Z,1520695579.848 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:26:20.236Z,1520695580.236 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:26:20.638Z,1520695580.638 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:26:21.060Z,1520695581.060 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:26:21.436Z,1520695581.436 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:26:21.837Z,1520695581.837 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:26:22.241Z,1520695582.241 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:26:22.648Z,1520695582.648 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:26:22.668Z,1520695582.668 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-03-10T15:26:22.668Z,1520695582.668 [Default:CheckIn:C.Wait] Stopped
2018-03-10T15:26:22.668Z,1520695582.668 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-03-10T15:26:22.668Z,1520695582.668 [Default:CheckIn:D] Running Loop=1
2018-03-10T15:26:23.049Z,1520695583.049 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:26:23.070Z,1520695583.070 [Default:CheckIn:D] Stopped
2018-03-10T15:26:23.070Z,1520695583.070 [Default:CheckIn:E] Running Loop=1
2018-03-10T15:26:23.444Z,1520695583.444 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:26:23.470Z,1520695583.470 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 607.085807 min 
2018-03-10T15:26:23.470Z,1520695583.470 [Default:CheckIn:E] Stopped
2018-03-10T15:26:23.471Z,1520695583.471 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-03-10T15:26:23.471Z,1520695583.471 [Default:CheckIn] Stopped
2018-03-10T15:26:23.471Z,1520695583.471 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-03-10T15:26:23.471Z,1520695583.471 [Default:CheckIn](INFO): Running loop #60
2018-03-10T15:26:23.471Z,1520695583.471 [Default:CheckIn] Running Loop=60
2018-03-10T15:26:23.471Z,1520695583.471 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-03-10T15:26:23.471Z,1520695583.471 [Default:CheckIn:Read_GPS] Running Loop=1
2018-03-10T15:26:26.702Z,1520695586.702 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:26:26.844Z,1520695586.844 [NAL9602](INFO): Powering up
2018-03-10T15:26:26.860Z,1520695586.860 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:26:27.228Z,1520695587.228 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:26:27.628Z,1520695587.628 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:26:28.021Z,1520695588.021 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:26:28.422Z,1520695588.422 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:26:28.820Z,1520695588.820 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:26:29.222Z,1520695589.222 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:26:29.620Z,1520695589.620 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:26:30.019Z,1520695590.019 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:26:30.417Z,1520695590.417 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:26:30.822Z,1520695590.822 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:26:31.219Z,1520695591.219 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:26:31.620Z,1520695591.620 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:26:32.020Z,1520695592.020 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:26:32.421Z,1520695592.421 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:26:32.820Z,1520695592.820 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:26:33.221Z,1520695593.221 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:26:33.621Z,1520695593.621 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:26:34.022Z,1520695594.022 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:26:34.416Z,1520695594.416 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:26:34.825Z,1520695594.825 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:26:35.225Z,1520695595.225 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:26:35.629Z,1520695595.629 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:26:36.020Z,1520695596.020 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:26:36.420Z,1520695596.420 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:26:36.815Z,1520695596.815 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:26:37.224Z,1520695597.224 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:26:37.635Z,1520695597.635 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:26:37.996Z,1520695597.996 [NAL9602](INFO): NAL9602 initialized
2018-03-10T15:26:38.013Z,1520695598.013 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:26:38.412Z,1520695598.412 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:26:38.834Z,1520695598.834 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:26:39.235Z,1520695599.235 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:26:39.631Z,1520695599.631 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:26:40.013Z,1520695600.013 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:26:40.433Z,1520695600.433 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:26:40.829Z,1520695600.829 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:26:41.210Z,1520695601.210 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:26:41.615Z,1520695601.615 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:26:42.020Z,1520695602.020 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:26:42.411Z,1520695602.411 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:26:42.813Z,1520695602.813 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:26:43.212Z,1520695603.212 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:26:43.611Z,1520695603.611 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:26:44.012Z,1520695604.012 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:26:44.416Z,1520695604.416 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:26:44.821Z,1520695604.821 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:26:45.228Z,1520695605.228 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:26:45.616Z,1520695605.616 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:26:46.016Z,1520695606.016 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:26:46.416Z,1520695606.416 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:26:46.813Z,1520695606.813 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:26:47.225Z,1520695607.225 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:26:47.621Z,1520695607.621 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:26:48.021Z,1520695608.021 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:26:48.425Z,1520695608.425 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:26:48.820Z,1520695608.820 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:26:49.220Z,1520695609.220 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:26:49.625Z,1520695609.625 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:26:50.029Z,1520695610.029 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:26:50.428Z,1520695610.428 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:26:50.822Z,1520695610.822 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:26:51.215Z,1520695611.215 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:26:51.628Z,1520695611.628 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:26:52.023Z,1520695612.023 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:26:52.421Z,1520695612.421 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:26:52.816Z,1520695612.816 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:26:53.211Z,1520695613.211 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:26:53.612Z,1520695613.612 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:26:54.013Z,1520695614.013 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:26:54.412Z,1520695614.412 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:26:54.832Z,1520695614.832 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:26:55.232Z,1520695615.232 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:26:55.610Z,1520695615.610 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:26:56.016Z,1520695616.016 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:26:56.421Z,1520695616.421 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:26:56.813Z,1520695616.813 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:26:57.213Z,1520695617.213 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:26:57.612Z,1520695617.612 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:26:58.020Z,1520695618.020 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:26:58.413Z,1520695618.413 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:26:58.816Z,1520695618.816 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:26:59.213Z,1520695619.213 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:26:59.612Z,1520695619.612 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:27:00.013Z,1520695620.013 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:27:00.413Z,1520695620.413 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:27:00.813Z,1520695620.813 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:27:01.216Z,1520695621.216 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:27:01.613Z,1520695621.613 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:27:02.016Z,1520695622.016 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:27:02.420Z,1520695622.420 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:27:02.819Z,1520695622.819 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:27:03.222Z,1520695623.222 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:27:03.622Z,1520695623.622 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:27:04.022Z,1520695624.022 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:27:04.425Z,1520695624.425 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:27:04.822Z,1520695624.822 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:27:05.220Z,1520695625.220 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:27:05.619Z,1520695625.619 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:27:06.018Z,1520695626.018 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:27:06.420Z,1520695626.420 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:27:06.815Z,1520695626.815 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:27:07.221Z,1520695627.221 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:27:07.631Z,1520695627.631 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:27:08.030Z,1520695628.030 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:27:08.038Z,1520695628.038 [BPC1](ERROR): Failed to receive battery data
2018-03-10T15:27:08.038Z,1520695628.038 [BPC1] Communications Fault, FailCount= 1
2018-03-10T15:27:08.038Z,1520695628.038 [BPC1](ERROR): Communications Fault
2018-03-10T15:27:08.061Z,1520695628.061 [CBIT](ERROR): Communications Fault in component: BPC1
2018-03-10T15:27:08.413Z,1520695628.413 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:27:08.816Z,1520695628.816 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:27:09.228Z,1520695629.228 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:27:09.265Z,1520695629.265 [CBIT](INFO): Clearing failed state for component BPC1
2018-03-10T15:27:09.265Z,1520695629.265 [BPC1] No Fault, FailCount= 1
2018-03-10T15:27:09.616Z,1520695629.616 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:27:10.004Z,1520695630.004 [NAL9602](ERROR): Failed to receive proper response when querying signal strength for MT queue check.
2018-03-10T15:27:10.079Z,1520695630.079 [NAL9602](FAULT): received: 
+CSQ:0

OK35, 0, 0, 0, 0

OK
2018-03-10T15:27:10.079Z,1520695630.079 [NAL9602] Data Fault, FailCount= 2
2018-03-10T15:27:10.079Z,1520695630.079 [NAL9602](ERROR): Data Fault
2018-03-10T15:27:10.096Z,1520695630.096 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:27:10.164Z,1520695630.164 [CBIT](ERROR): Data Fault in component: NAL9602
2018-03-10T15:27:10.396Z,1520695630.396 [NAL9602](INFO): Powering down
2018-03-10T15:27:10.415Z,1520695630.415 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:27:10.817Z,1520695630.817 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:27:11.213Z,1520695631.213 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:27:11.267Z,1520695631.267 [CBIT](INFO): Clearing failed state for component NAL9602
2018-03-10T15:27:11.267Z,1520695631.267 [NAL9602] No Fault, FailCount= 2
2018-03-10T15:27:11.613Z,1520695631.613 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:27:12.017Z,1520695632.017 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:27:12.412Z,1520695632.412 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:27:12.812Z,1520695632.812 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:27:13.214Z,1520695633.214 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:27:13.619Z,1520695633.619 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:27:14.018Z,1520695634.018 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:27:14.418Z,1520695634.418 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:27:14.819Z,1520695634.819 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:27:15.220Z,1520695635.220 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:27:15.618Z,1520695635.618 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:27:16.020Z,1520695636.020 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:27:16.418Z,1520695636.418 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:27:16.817Z,1520695636.817 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:27:17.220Z,1520695637.220 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:27:17.620Z,1520695637.620 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:27:18.020Z,1520695638.020 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:27:18.423Z,1520695638.423 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:27:18.820Z,1520695638.820 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:27:19.220Z,1520695639.220 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:27:19.623Z,1520695639.623 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:27:20.021Z,1520695640.021 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:27:20.418Z,1520695640.418 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:27:20.823Z,1520695640.823 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:27:21.219Z,1520695641.219 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:27:21.617Z,1520695641.617 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:27:22.021Z,1520695642.021 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:27:22.420Z,1520695642.420 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:27:22.818Z,1520695642.818 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:27:23.220Z,1520695643.220 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:27:23.625Z,1520695643.625 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:27:26.978Z,1520695646.978 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:27:27.090Z,1520695647.090 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:27:27.492Z,1520695647.492 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:27:27.886Z,1520695647.886 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:27:28.289Z,1520695648.289 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:27:28.686Z,1520695648.686 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:27:29.087Z,1520695649.087 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:27:29.484Z,1520695649.484 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:27:29.886Z,1520695649.886 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:27:30.293Z,1520695650.293 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:27:30.689Z,1520695650.689 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:27:31.098Z,1520695651.098 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:27:31.474Z,1520695651.474 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:27:31.894Z,1520695651.894 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:27:32.281Z,1520695652.281 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:27:32.676Z,1520695652.676 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:27:33.085Z,1520695653.085 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:27:33.479Z,1520695653.479 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:27:33.885Z,1520695653.885 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:27:34.276Z,1520695654.276 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:27:34.684Z,1520695654.684 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:27:35.088Z,1520695655.088 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:27:35.486Z,1520695655.486 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:27:35.885Z,1520695655.885 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:27:36.281Z,1520695656.281 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:27:36.684Z,1520695656.684 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:27:37.087Z,1520695657.087 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:27:37.487Z,1520695657.487 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:27:37.888Z,1520695657.888 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:27:38.286Z,1520695658.286 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:27:38.685Z,1520695658.685 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:27:39.084Z,1520695659.084 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:27:39.488Z,1520695659.488 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:27:39.885Z,1520695659.885 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:27:39.894Z,1520695659.894 [BPC1](FAULT): Failed to initialize
2018-03-10T15:27:39.894Z,1520695659.894 [BPC1] Communications Fault, FailCount= 2
2018-03-10T15:27:39.894Z,1520695659.894 [BPC1](ERROR): Communications Fault
2018-03-10T15:27:39.992Z,1520695659.992 [CBIT](ERROR): Communications Fault in component: BPC1
2018-03-10T15:27:40.276Z,1520695660.276 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:27:40.664Z,1520695660.664 [NAL9602](INFO): Powering up NAL9602
2018-03-10T15:27:40.681Z,1520695660.681 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:27:41.076Z,1520695661.076 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:27:41.173Z,1520695661.173 [CBIT](INFO): Clearing failed state for component BPC1
2018-03-10T15:27:41.173Z,1520695661.173 [BPC1] No Fault, FailCount= 2
2018-03-10T15:27:41.484Z,1520695661.484 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:27:41.880Z,1520695661.880 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:27:42.280Z,1520695662.280 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:27:42.684Z,1520695662.684 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:27:43.084Z,1520695663.084 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:27:43.478Z,1520695663.478 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:27:43.876Z,1520695663.876 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:27:44.279Z,1520695664.279 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:27:44.674Z,1520695664.674 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:27:45.076Z,1520695665.076 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:27:45.493Z,1520695665.493 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:27:45.880Z,1520695665.880 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:27:46.329Z,1520695666.329 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:27:46.691Z,1520695666.691 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:27:47.082Z,1520695667.082 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:27:47.482Z,1520695667.482 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:27:47.881Z,1520695667.881 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:27:48.277Z,1520695668.277 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:27:48.692Z,1520695668.692 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:27:49.089Z,1520695669.089 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:27:49.491Z,1520695669.491 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:27:49.882Z,1520695669.882 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:27:50.281Z,1520695670.281 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:27:50.677Z,1520695670.677 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:27:51.081Z,1520695671.081 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:27:51.510Z,1520695671.510 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:27:51.868Z,1520695671.868 [NAL9602](INFO): NAL9602 initialized
2018-03-10T15:27:51.884Z,1520695671.884 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:27:52.285Z,1520695672.285 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:27:52.691Z,1520695672.691 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:27:53.096Z,1520695673.096 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:27:53.495Z,1520695673.495 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:27:53.884Z,1520695673.884 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:27:54.288Z,1520695674.288 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:27:54.686Z,1520695674.686 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:27:55.091Z,1520695675.091 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:27:55.495Z,1520695675.495 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:27:55.895Z,1520695675.895 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:27:56.285Z,1520695676.285 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:27:56.685Z,1520695676.685 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:27:57.085Z,1520695677.085 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:27:57.492Z,1520695677.492 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:27:57.885Z,1520695677.885 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:27:58.283Z,1520695678.283 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:27:58.317Z,1520695678.317 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T15:27:58.317Z,1520695678.317 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 126
2018-03-10T15:27:58.317Z,1520695678.317 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-10T15:27:58.342Z,1520695678.342 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-10T15:27:58.689Z,1520695678.689 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:27:58.741Z,1520695678.741 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-10T15:27:58.741Z,1520695678.741 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 126
2018-03-10T15:27:59.080Z,1520695679.080 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:27:59.131Z,1520695679.131 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-10T15:27:59.132Z,1520695679.132 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-10T15:27:59.132Z,1520695679.132 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-10T15:27:59.490Z,1520695679.490 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:27:59.903Z,1520695679.903 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:28:00.299Z,1520695680.299 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:28:00.704Z,1520695680.704 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:28:01.098Z,1520695681.098 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:28:01.475Z,1520695681.475 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:28:01.881Z,1520695681.881 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:28:02.281Z,1520695682.281 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:28:02.700Z,1520695682.700 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:28:03.083Z,1520695683.083 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:28:03.483Z,1520695683.483 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:28:03.888Z,1520695683.888 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:28:04.294Z,1520695684.294 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:28:04.689Z,1520695684.689 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:28:05.098Z,1520695685.098 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:28:05.500Z,1520695685.500 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:28:05.899Z,1520695685.899 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:28:06.294Z,1520695686.294 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:28:06.681Z,1520695686.681 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:28:07.081Z,1520695687.081 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:28:07.484Z,1520695687.484 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:28:07.885Z,1520695687.885 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:28:08.298Z,1520695688.298 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:28:08.684Z,1520695688.684 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:28:09.088Z,1520695689.088 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:28:09.484Z,1520695689.484 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:28:09.894Z,1520695689.894 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:28:10.319Z,1520695690.319 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:28:10.711Z,1520695690.711 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:28:11.118Z,1520695691.118 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:28:11.488Z,1520695691.488 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:28:11.893Z,1520695691.893 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:28:11.916Z,1520695691.916 [BPC1](FAULT): Failed to initialize
2018-03-10T15:28:11.917Z,1520695691.917 [BPC1] Communications Fault, FailCount= 3
2018-03-10T15:28:11.917Z,1520695691.917 [BPC1](ERROR): Communications Fault
2018-03-10T15:28:11.939Z,1520695691.939 [CBIT](ERROR): Communications Fault in component: BPC1
2018-03-10T15:28:12.293Z,1520695692.293 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:28:12.677Z,1520695692.677 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:28:13.086Z,1520695693.086 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:28:13.137Z,1520695693.137 [CBIT](INFO): Clearing failed state for component BPC1
2018-03-10T15:28:13.137Z,1520695693.137 [BPC1] No Fault, FailCount= 3
2018-03-10T15:28:13.483Z,1520695693.483 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:28:13.886Z,1520695693.886 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:28:14.288Z,1520695694.288 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:28:14.692Z,1520695694.692 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:28:15.083Z,1520695695.083 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:28:15.496Z,1520695695.496 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:28:15.891Z,1520695695.891 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:28:16.291Z,1520695696.291 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:28:16.731Z,1520695696.731 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:28:17.086Z,1520695697.086 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:28:17.477Z,1520695697.477 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:28:17.899Z,1520695697.899 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:28:18.291Z,1520695698.291 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:28:18.686Z,1520695698.686 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:28:19.092Z,1520695699.092 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:28:19.487Z,1520695699.487 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:28:19.878Z,1520695699.878 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:28:20.294Z,1520695700.294 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:28:20.738Z,1520695700.738 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:28:21.100Z,1520695701.100 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:28:21.497Z,1520695701.497 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:28:21.903Z,1520695701.903 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:28:22.274Z,1520695702.274 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:28:22.682Z,1520695702.682 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:28:23.080Z,1520695703.080 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:28:23.479Z,1520695703.479 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:28:23.886Z,1520695703.886 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:28:27.048Z,1520695707.048 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:28:27.175Z,1520695707.175 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:28:27.571Z,1520695707.571 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:28:27.993Z,1520695707.993 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:28:28.366Z,1520695708.366 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:28:28.754Z,1520695708.754 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:28:29.154Z,1520695709.154 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:28:29.568Z,1520695709.568 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:28:29.961Z,1520695709.961 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:28:30.355Z,1520695710.355 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:28:30.752Z,1520695710.752 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:28:31.164Z,1520695711.164 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:28:31.556Z,1520695711.556 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:28:31.965Z,1520695711.965 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:28:32.367Z,1520695712.367 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:28:32.768Z,1520695712.768 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:28:33.169Z,1520695713.169 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:28:33.549Z,1520695713.549 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:28:33.949Z,1520695713.949 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:28:34.338Z,1520695714.338 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:28:34.743Z,1520695714.743 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:28:35.185Z,1520695715.185 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:28:35.562Z,1520695715.562 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:28:35.946Z,1520695715.946 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:28:36.368Z,1520695716.368 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:28:36.776Z,1520695716.776 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:28:37.176Z,1520695717.176 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:28:37.551Z,1520695717.551 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:28:37.974Z,1520695717.974 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:28:38.380Z,1520695718.380 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:28:38.746Z,1520695718.746 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:28:39.146Z,1520695719.146 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:28:39.553Z,1520695719.553 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:28:39.959Z,1520695719.959 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:28:40.349Z,1520695720.349 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:28:40.753Z,1520695720.753 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:28:41.158Z,1520695721.158 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:28:41.541Z,1520695721.541 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:28:41.953Z,1520695721.953 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:28:42.390Z,1520695722.390 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:28:42.778Z,1520695722.778 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:28:43.174Z,1520695723.174 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:28:43.571Z,1520695723.571 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:28:43.592Z,1520695723.592 [BPC1](FAULT): Failed to initialize
2018-03-10T15:28:43.592Z,1520695723.592 [BPC1] Communications Fault, FailCount= 4
2018-03-10T15:28:43.592Z,1520695723.592 [BPC1](ERROR): Communications Fault
2018-03-10T15:28:43.641Z,1520695723.641 [CBIT](ERROR): Communications Fault in component: BPC1
2018-03-10T15:28:43.956Z,1520695723.956 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:28:44.367Z,1520695724.367 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:28:44.759Z,1520695724.759 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:28:44.790Z,1520695724.790 [CBIT](INFO): Clearing failed state for component BPC1
2018-03-10T15:28:44.790Z,1520695724.790 [BPC1] No Fault, FailCount= 4
2018-03-10T15:28:45.149Z,1520695725.149 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:28:45.569Z,1520695725.569 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:28:45.946Z,1520695725.946 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:28:46.342Z,1520695726.342 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:28:46.744Z,1520695726.744 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:28:47.145Z,1520695727.145 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:28:47.567Z,1520695727.567 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:28:47.960Z,1520695727.960 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:28:48.367Z,1520695728.367 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:28:48.751Z,1520695728.751 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:28:49.148Z,1520695729.148 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:28:49.576Z,1520695729.576 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:28:49.954Z,1520695729.954 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:28:50.348Z,1520695730.348 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:28:50.767Z,1520695730.767 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:28:51.178Z,1520695731.178 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:28:51.568Z,1520695731.568 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:28:51.952Z,1520695731.952 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:28:52.342Z,1520695732.342 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:28:52.783Z,1520695732.783 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:28:53.171Z,1520695733.171 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:28:53.556Z,1520695733.556 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:28:53.956Z,1520695733.956 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:28:54.348Z,1520695734.348 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:28:54.746Z,1520695734.746 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:28:55.150Z,1520695735.150 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:28:55.550Z,1520695735.550 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:28:55.951Z,1520695735.951 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:28:56.355Z,1520695736.355 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:28:56.776Z,1520695736.776 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:28:57.172Z,1520695737.172 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:28:57.552Z,1520695737.552 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:28:57.967Z,1520695737.967 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:28:58.372Z,1520695738.372 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:28:58.781Z,1520695738.781 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:28:59.166Z,1520695739.166 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:28:59.566Z,1520695739.566 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:28:59.957Z,1520695739.957 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:29:00.353Z,1520695740.353 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:29:00.758Z,1520695740.758 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:29:01.157Z,1520695741.157 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:29:01.557Z,1520695741.557 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:29:01.957Z,1520695741.957 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:29:02.354Z,1520695742.354 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:29:02.751Z,1520695742.751 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:29:03.168Z,1520695743.168 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:29:03.572Z,1520695743.572 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:29:03.976Z,1520695743.976 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:29:04.375Z,1520695744.375 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:29:04.769Z,1520695744.769 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:29:05.152Z,1520695745.152 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:29:05.550Z,1520695745.550 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:29:05.957Z,1520695745.957 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:29:06.352Z,1520695746.352 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:29:06.753Z,1520695746.753 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:29:07.164Z,1520695747.164 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:29:07.554Z,1520695747.554 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:29:07.954Z,1520695747.954 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:29:08.359Z,1520695748.359 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:29:08.765Z,1520695748.765 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:29:09.168Z,1520695749.168 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:29:09.563Z,1520695749.563 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:29:09.955Z,1520695749.955 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:29:10.345Z,1520695750.345 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:29:10.751Z,1520695750.751 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:29:11.165Z,1520695751.165 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:29:11.562Z,1520695751.562 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:29:11.952Z,1520695751.952 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:29:12.359Z,1520695752.359 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:29:12.768Z,1520695752.768 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:29:13.167Z,1520695753.167 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:29:13.574Z,1520695753.574 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:29:13.968Z,1520695753.968 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:29:14.376Z,1520695754.376 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:29:14.771Z,1520695754.771 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:29:15.149Z,1520695755.149 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:29:15.543Z,1520695755.543 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:29:15.946Z,1520695755.946 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:29:16.346Z,1520695756.346 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:29:16.745Z,1520695756.745 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:29:17.150Z,1520695757.150 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:29:17.545Z,1520695757.545 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:29:17.950Z,1520695757.950 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:29:18.368Z,1520695758.368 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:29:18.760Z,1520695758.760 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:29:19.159Z,1520695759.159 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:29:19.565Z,1520695759.565 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:29:19.980Z,1520695759.980 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:29:20.364Z,1520695760.364 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:29:20.758Z,1520695760.758 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:29:21.161Z,1520695761.161 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:29:21.568Z,1520695761.568 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:29:21.946Z,1520695761.946 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:29:22.357Z,1520695762.357 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:29:22.744Z,1520695762.744 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:29:23.146Z,1520695763.146 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:29:23.549Z,1520695763.549 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:29:23.962Z,1520695763.962 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:29:27.264Z,1520695767.264 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:29:27.416Z,1520695767.416 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:29:27.755Z,1520695767.755 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:29:28.143Z,1520695768.143 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:29:28.541Z,1520695768.541 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:29:28.938Z,1520695768.938 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:29:29.338Z,1520695769.338 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:29:29.740Z,1520695769.740 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:29:30.140Z,1520695770.140 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:29:30.540Z,1520695770.540 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:29:30.944Z,1520695770.944 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:29:31.340Z,1520695771.340 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:29:31.747Z,1520695771.747 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:29:32.146Z,1520695772.146 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:29:32.550Z,1520695772.550 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:29:32.955Z,1520695772.955 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:29:33.330Z,1520695773.330 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:29:33.732Z,1520695773.732 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:29:34.134Z,1520695774.134 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:29:34.537Z,1520695774.537 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:29:34.932Z,1520695774.932 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:29:35.333Z,1520695775.333 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:29:35.737Z,1520695775.737 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:29:36.132Z,1520695776.132 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:29:36.533Z,1520695776.533 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:29:36.946Z,1520695776.946 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:29:37.355Z,1520695777.355 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:29:37.753Z,1520695777.753 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:29:38.151Z,1520695778.151 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:29:38.533Z,1520695778.533 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:29:38.937Z,1520695778.937 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:29:39.337Z,1520695779.337 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:29:39.731Z,1520695779.731 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:29:40.133Z,1520695780.133 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:29:40.537Z,1520695780.537 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:29:40.933Z,1520695780.933 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:29:41.333Z,1520695781.333 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:29:41.737Z,1520695781.737 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:29:42.151Z,1520695782.151 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:29:42.551Z,1520695782.551 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:29:42.951Z,1520695782.951 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:29:43.355Z,1520695783.355 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:29:43.741Z,1520695783.741 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:29:44.133Z,1520695784.133 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:29:44.536Z,1520695784.536 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:29:44.933Z,1520695784.933 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:29:45.337Z,1520695785.337 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:29:45.793Z,1520695785.793 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:29:46.184Z,1520695786.184 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:29:46.546Z,1520695786.546 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:29:46.942Z,1520695786.942 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:29:47.357Z,1520695787.357 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:29:47.752Z,1520695787.752 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:29:48.185Z,1520695788.185 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:29:48.563Z,1520695788.563 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:29:48.932Z,1520695788.932 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:29:49.361Z,1520695789.361 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:29:49.740Z,1520695789.740 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:29:50.164Z,1520695790.164 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:29:50.542Z,1520695790.542 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:29:50.933Z,1520695790.933 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:29:51.344Z,1520695791.344 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:29:51.741Z,1520695791.741 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:29:52.134Z,1520695792.134 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:29:52.552Z,1520695792.552 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:29:52.951Z,1520695792.951 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:29:53.356Z,1520695793.356 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:29:53.752Z,1520695793.752 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:29:54.133Z,1520695794.133 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:29:54.533Z,1520695794.533 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:29:54.933Z,1520695794.933 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:29:55.346Z,1520695795.346 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:29:55.728Z,1520695795.728 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:29:56.145Z,1520695796.145 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:29:56.532Z,1520695796.532 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:29:56.937Z,1520695796.937 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:29:57.329Z,1520695797.329 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:29:57.752Z,1520695797.752 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:29:58.153Z,1520695798.153 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:29:58.556Z,1520695798.556 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:29:58.952Z,1520695798.952 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:29:59.332Z,1520695799.332 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:29:59.737Z,1520695799.737 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:30:00.132Z,1520695800.132 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:30:00.536Z,1520695800.536 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:30:00.937Z,1520695800.937 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:30:01.332Z,1520695801.332 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:30:01.737Z,1520695801.737 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:30:02.138Z,1520695802.138 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:30:02.534Z,1520695802.534 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:30:02.951Z,1520695802.951 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:30:03.352Z,1520695803.352 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:30:03.752Z,1520695803.752 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:30:04.143Z,1520695804.143 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:30:04.537Z,1520695804.537 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:30:04.942Z,1520695804.942 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:30:05.340Z,1520695805.340 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:30:05.742Z,1520695805.742 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:30:06.138Z,1520695806.138 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:30:06.538Z,1520695806.538 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:30:06.940Z,1520695806.940 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:30:07.336Z,1520695807.336 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:30:07.729Z,1520695807.729 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:30:08.152Z,1520695808.152 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:30:08.551Z,1520695808.551 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:30:08.955Z,1520695808.955 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:30:09.351Z,1520695809.351 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:30:09.736Z,1520695809.736 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:30:10.128Z,1520695810.128 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:30:10.533Z,1520695810.533 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:30:10.932Z,1520695810.932 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:30:11.328Z,1520695811.328 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:30:11.733Z,1520695811.733 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:30:12.132Z,1520695812.132 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:30:12.545Z,1520695812.545 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:30:12.933Z,1520695812.933 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:30:13.352Z,1520695813.352 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:30:13.752Z,1520695813.752 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:30:14.150Z,1520695814.150 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:30:14.557Z,1520695814.557 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:30:14.933Z,1520695814.933 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:30:15.333Z,1520695815.333 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:30:15.732Z,1520695815.732 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:30:16.133Z,1520695816.133 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:30:16.533Z,1520695816.533 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:30:16.937Z,1520695816.937 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:30:17.349Z,1520695817.349 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:30:17.741Z,1520695817.741 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:30:18.142Z,1520695818.142 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:30:18.554Z,1520695818.554 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:30:18.946Z,1520695818.946 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:30:19.347Z,1520695819.347 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:30:19.746Z,1520695819.746 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:30:20.136Z,1520695820.136 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:30:20.544Z,1520695820.544 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:30:20.941Z,1520695820.941 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:30:21.341Z,1520695821.341 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:30:21.736Z,1520695821.736 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:30:22.146Z,1520695822.146 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:30:22.545Z,1520695822.545 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:30:22.932Z,1520695822.932 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:30:23.332Z,1520695823.332 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:30:23.758Z,1520695823.758 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:30:24.152Z,1520695824.152 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:30:27.567Z,1520695827.567 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:30:27.700Z,1520695827.700 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:30:28.073Z,1520695828.073 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:30:28.475Z,1520695828.475 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:30:28.888Z,1520695828.888 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:30:29.288Z,1520695829.288 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:30:29.688Z,1520695829.688 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:30:30.084Z,1520695830.084 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:30:30.477Z,1520695830.477 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:30:30.872Z,1520695830.872 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:30:31.273Z,1520695831.273 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:30:31.673Z,1520695831.673 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:30:32.073Z,1520695832.073 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:30:32.479Z,1520695832.479 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:30:32.889Z,1520695832.889 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:30:33.277Z,1520695833.277 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:30:33.677Z,1520695833.677 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:30:34.103Z,1520695834.103 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:30:34.492Z,1520695834.492 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:30:34.894Z,1520695834.894 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:30:35.292Z,1520695835.292 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:30:35.669Z,1520695835.669 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:30:36.073Z,1520695836.073 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:30:36.473Z,1520695836.473 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:30:36.873Z,1520695836.873 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:30:37.273Z,1520695837.273 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:30:37.673Z,1520695837.673 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:30:38.072Z,1520695838.072 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:30:38.469Z,1520695838.469 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:30:38.893Z,1520695838.893 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:30:39.300Z,1520695839.300 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:30:39.695Z,1520695839.695 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:30:40.091Z,1520695840.091 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:30:40.478Z,1520695840.478 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:30:40.873Z,1520695840.873 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:30:41.273Z,1520695841.273 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:30:41.669Z,1520695841.669 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:30:42.077Z,1520695842.077 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:30:42.478Z,1520695842.478 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:30:42.881Z,1520695842.881 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:30:43.281Z,1520695843.281 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:30:43.677Z,1520695843.677 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:30:44.082Z,1520695844.082 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:30:44.503Z,1520695844.503 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:30:44.887Z,1520695844.887 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:30:45.288Z,1520695845.288 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:30:45.694Z,1520695845.694 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:30:46.074Z,1520695846.074 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:30:46.473Z,1520695846.473 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:30:46.873Z,1520695846.873 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:30:47.277Z,1520695847.277 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:30:47.673Z,1520695847.673 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:30:48.077Z,1520695848.077 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:30:48.473Z,1520695848.473 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:30:48.877Z,1520695848.877 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:30:49.285Z,1520695849.285 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:30:49.683Z,1520695849.683 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:30:50.079Z,1520695850.079 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:30:50.483Z,1520695850.483 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:30:50.887Z,1520695850.887 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:30:51.273Z,1520695851.273 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:30:51.677Z,1520695851.677 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:30:52.076Z,1520695852.076 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:30:52.477Z,1520695852.477 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:30:52.878Z,1520695852.878 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:30:53.278Z,1520695853.278 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:30:53.681Z,1520695853.681 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:30:54.085Z,1520695854.085 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:30:54.477Z,1520695854.477 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:30:54.892Z,1520695854.892 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:30:55.291Z,1520695855.291 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:30:55.692Z,1520695855.692 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:30:56.092Z,1520695856.092 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:30:56.473Z,1520695856.473 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:30:56.893Z,1520695856.893 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:30:57.272Z,1520695857.272 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:30:57.673Z,1520695857.673 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:30:58.072Z,1520695858.072 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:30:58.473Z,1520695858.473 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:30:58.885Z,1520695858.885 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:30:59.273Z,1520695859.273 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:30:59.309Z,1520695859.309 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T15:30:59.309Z,1520695859.309 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 127
2018-03-10T15:30:59.309Z,1520695859.309 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-10T15:30:59.321Z,1520695859.321 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-10T15:30:59.677Z,1520695859.677 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:30:59.720Z,1520695859.720 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-10T15:30:59.720Z,1520695859.720 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 127
2018-03-10T15:31:00.097Z,1520695860.097 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:31:00.119Z,1520695860.119 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-10T15:31:00.120Z,1520695860.120 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-10T15:31:00.120Z,1520695860.120 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-10T15:31:00.491Z,1520695860.491 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:31:00.894Z,1520695860.894 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:31:01.280Z,1520695861.280 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:31:01.673Z,1520695861.673 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:31:02.072Z,1520695862.072 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:31:02.478Z,1520695862.478 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:31:02.881Z,1520695862.881 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:31:03.277Z,1520695863.277 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:31:03.677Z,1520695863.677 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:31:04.073Z,1520695864.073 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:31:04.473Z,1520695864.473 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:31:04.878Z,1520695864.878 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:31:05.288Z,1520695865.288 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:31:05.684Z,1520695865.684 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:31:06.096Z,1520695866.096 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:31:06.493Z,1520695866.493 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:31:06.878Z,1520695866.878 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:31:07.281Z,1520695867.281 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:31:07.680Z,1520695867.680 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:31:08.080Z,1520695868.080 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:31:08.481Z,1520695868.481 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:31:08.881Z,1520695868.881 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:31:09.282Z,1520695869.282 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:31:09.676Z,1520695869.676 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:31:10.086Z,1520695870.086 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:31:10.487Z,1520695870.487 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:31:10.887Z,1520695870.887 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:31:11.290Z,1520695871.290 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:31:11.695Z,1520695871.695 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:31:12.077Z,1520695872.077 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:31:12.489Z,1520695872.489 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:31:12.873Z,1520695872.873 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:31:13.269Z,1520695873.269 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:31:13.672Z,1520695873.672 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:31:14.069Z,1520695874.069 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:31:14.470Z,1520695874.470 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:31:14.872Z,1520695874.872 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:31:15.273Z,1520695875.273 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:31:15.696Z,1520695875.696 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:31:16.103Z,1520695876.103 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:31:16.483Z,1520695876.483 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:31:16.884Z,1520695876.884 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:31:17.272Z,1520695877.272 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:31:17.673Z,1520695877.673 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:31:18.073Z,1520695878.073 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:31:18.472Z,1520695878.472 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:31:18.874Z,1520695878.874 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:31:19.273Z,1520695879.273 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:31:19.678Z,1520695879.678 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:31:20.081Z,1520695880.081 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:31:20.478Z,1520695880.478 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:31:20.896Z,1520695880.896 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:31:21.295Z,1520695881.295 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:31:21.695Z,1520695881.695 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:31:22.096Z,1520695882.096 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:31:22.482Z,1520695882.482 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:31:22.878Z,1520695882.878 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:31:23.281Z,1520695883.281 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:31:23.685Z,1520695883.685 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:31:23.705Z,1520695883.705 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-03-10T15:26:23.5Z
2018-03-10T15:31:23.705Z,1520695883.705 [Default:CheckIn:Read_GPS] Stopped
2018-03-10T15:31:23.705Z,1520695883.705 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-03-10T15:31:24.075Z,1520695884.075 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:31:24.620Z,1520695884.620 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:31:27.700Z,1520695887.700 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:31:27.859Z,1520695887.859 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:31:28.184Z,1520695888.184 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20180310T051512/Courier0240.lzma
2018-03-10T15:31:28.223Z,1520695888.223 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:31:28.606Z,1520695888.606 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:31:28.978Z,1520695888.978 [DataOverHttps](INFO): Moved sent file to Logs/20180310T051512/Courier0240.lzma.bak
2018-03-10T15:31:28.978Z,1520695888.978 [DataOverHttps](INFO): SBD MOMSN=8005736
2018-03-10T15:31:29.014Z,1520695889.014 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:31:29.707Z,1520695889.707 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:31:29.822Z,1520695889.822 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:31:30.206Z,1520695890.206 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:31:33.379Z,1520695893.379 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:31:33.518Z,1520695893.518 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:31:33.918Z,1520695893.918 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:31:34.275Z,1520695894.275 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:31:34.672Z,1520695894.672 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:31:35.077Z,1520695895.077 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:31:35.464Z,1520695895.464 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:31:38.690Z,1520695898.690 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:31:38.843Z,1520695898.843 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:31:39.173Z,1520695899.173 [DataOverHttps](INFO): Sending 265 bytes from file Logs/20180310T051512/Express0241.lzma
2018-03-10T15:31:39.226Z,1520695899.226 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:31:39.592Z,1520695899.592 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:31:39.962Z,1520695899.962 [DataOverHttps](INFO): Moved sent file to Logs/20180310T051512/Express0241.lzma.bak
2018-03-10T15:31:39.962Z,1520695899.962 [DataOverHttps](INFO): SBD MOMSN=8005738
2018-03-10T15:31:40.001Z,1520695900.001 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:31:40.648Z,1520695900.648 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:31:40.668Z,1520695900.668 [Default:CheckIn:Read_Iridium] Stopped
2018-03-10T15:31:40.668Z,1520695900.668 [Default:CheckIn:C.Wait] Running Loop=1
2018-03-10T15:31:40.668Z,1520695900.668 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-03-10T15:31:40.785Z,1520695900.785 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:31:41.192Z,1520695901.192 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:31:41.560Z,1520695901.560 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session.
2018-03-10T15:31:41.595Z,1520695901.595 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:31:41.990Z,1520695901.990 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:31:42.390Z,1520695902.390 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:31:42.790Z,1520695902.790 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:31:43.193Z,1520695903.193 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:31:46.360Z,1520695906.360 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:31:46.504Z,1520695906.504 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:31:46.883Z,1520695906.883 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:31:47.271Z,1520695907.271 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:31:47.679Z,1520695907.679 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:31:48.076Z,1520695908.076 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:31:48.480Z,1520695908.480 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:31:48.877Z,1520695908.877 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:31:49.276Z,1520695909.276 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:31:49.680Z,1520695909.680 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:31:50.076Z,1520695910.076 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:31:50.476Z,1520695910.476 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:31:50.870Z,1520695910.870 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:31:51.276Z,1520695911.276 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:31:51.680Z,1520695911.680 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:31:52.080Z,1520695912.080 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:31:52.480Z,1520695912.480 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:31:52.879Z,1520695912.879 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:31:53.270Z,1520695913.270 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:31:53.681Z,1520695913.681 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:31:54.076Z,1520695914.076 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:31:54.476Z,1520695914.476 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:31:54.876Z,1520695914.876 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:31:55.277Z,1520695915.277 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:31:55.676Z,1520695915.676 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:31:56.077Z,1520695916.077 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:31:56.476Z,1520695916.476 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:31:56.876Z,1520695916.876 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:31:57.283Z,1520695917.283 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:31:57.682Z,1520695917.682 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:31:58.085Z,1520695918.085 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:31:58.485Z,1520695918.485 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:31:58.885Z,1520695918.885 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:31:59.284Z,1520695919.284 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:31:59.682Z,1520695919.682 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:32:00.084Z,1520695920.084 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:32:00.484Z,1520695920.484 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:32:00.884Z,1520695920.884 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:32:01.284Z,1520695921.284 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:32:01.684Z,1520695921.684 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:32:02.084Z,1520695922.084 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:32:02.480Z,1520695922.480 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:32:02.872Z,1520695922.872 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:32:03.278Z,1520695923.278 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:32:03.676Z,1520695923.676 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:32:04.080Z,1520695924.080 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:32:04.480Z,1520695924.480 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:32:04.875Z,1520695924.875 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:32:05.274Z,1520695925.274 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:32:05.680Z,1520695925.680 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:32:06.076Z,1520695926.076 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:32:06.480Z,1520695926.480 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:32:06.882Z,1520695926.882 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:32:07.285Z,1520695927.285 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:32:07.683Z,1520695927.683 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:32:08.088Z,1520695928.088 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:32:08.484Z,1520695928.484 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:32:08.882Z,1520695928.882 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:32:09.282Z,1520695929.282 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:32:09.688Z,1520695929.688 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:32:10.088Z,1520695930.088 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:32:10.494Z,1520695930.494 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:32:10.885Z,1520695930.885 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:32:11.283Z,1520695931.283 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:32:11.680Z,1520695931.680 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:32:12.072Z,1520695932.072 [NAL9602](INFO): Powering down
2018-03-10T15:32:12.101Z,1520695932.101 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:32:12.472Z,1520695932.472 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:32:12.888Z,1520695932.888 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:32:13.296Z,1520695933.296 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:32:13.672Z,1520695933.672 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:32:14.076Z,1520695934.076 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:32:14.496Z,1520695934.496 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:32:14.873Z,1520695934.873 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:32:15.277Z,1520695935.277 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:32:15.696Z,1520695935.696 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:32:16.072Z,1520695936.072 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:32:16.476Z,1520695936.476 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:32:16.876Z,1520695936.876 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:32:17.280Z,1520695937.280 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:32:17.674Z,1520695937.674 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:32:18.077Z,1520695938.077 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:32:18.477Z,1520695938.477 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:32:18.875Z,1520695938.875 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:32:19.278Z,1520695939.278 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:32:19.682Z,1520695939.682 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:32:20.076Z,1520695940.076 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:32:20.485Z,1520695940.485 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:32:20.894Z,1520695940.894 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:32:21.293Z,1520695941.293 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:32:21.682Z,1520695941.682 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:32:22.081Z,1520695942.081 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:32:22.484Z,1520695942.484 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:32:22.880Z,1520695942.880 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:32:23.284Z,1520695943.284 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:32:23.682Z,1520695943.682 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:32:24.084Z,1520695944.084 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:32:24.476Z,1520695944.476 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:32:24.872Z,1520695944.872 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:32:25.277Z,1520695945.277 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:32:25.680Z,1520695945.680 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:32:26.076Z,1520695946.076 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:32:26.497Z,1520695946.497 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:32:26.872Z,1520695946.872 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:32:27.270Z,1520695947.270 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:32:27.696Z,1520695947.696 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:32:28.072Z,1520695948.072 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:32:28.473Z,1520695948.473 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:32:28.876Z,1520695948.876 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:32:29.273Z,1520695949.273 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:32:29.670Z,1520695949.670 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:32:30.084Z,1520695950.084 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:32:30.472Z,1520695950.472 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:32:30.870Z,1520695950.870 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:32:31.284Z,1520695951.284 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:32:31.681Z,1520695951.681 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:32:32.084Z,1520695952.084 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:32:32.485Z,1520695952.485 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:32:32.885Z,1520695952.885 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:32:33.283Z,1520695953.283 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:32:33.684Z,1520695953.684 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:32:34.084Z,1520695954.084 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:32:34.487Z,1520695954.487 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:32:34.885Z,1520695954.885 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:32:35.284Z,1520695955.284 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:32:35.687Z,1520695955.687 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:32:36.088Z,1520695956.088 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:32:36.487Z,1520695956.487 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:32:36.885Z,1520695956.885 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:32:37.282Z,1520695957.282 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:32:37.680Z,1520695957.680 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:32:38.088Z,1520695958.088 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:32:38.480Z,1520695958.480 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:32:38.877Z,1520695958.877 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:32:39.272Z,1520695959.272 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:32:39.676Z,1520695959.676 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:32:40.072Z,1520695960.072 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:32:40.472Z,1520695960.472 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:32:40.876Z,1520695960.876 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:32:41.272Z,1520695961.272 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:32:44.421Z,1520695964.421 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:32:44.550Z,1520695964.550 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:32:44.912Z,1520695964.912 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:32:45.309Z,1520695965.309 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:32:45.711Z,1520695965.711 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:32:46.108Z,1520695966.108 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:32:46.508Z,1520695966.508 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:32:46.918Z,1520695966.918 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:32:47.312Z,1520695967.312 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:32:47.707Z,1520695967.707 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:32:48.112Z,1520695968.112 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:32:48.512Z,1520695968.512 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:32:48.904Z,1520695968.904 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:32:49.318Z,1520695969.318 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:32:49.708Z,1520695969.708 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:32:50.108Z,1520695970.108 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:32:50.510Z,1520695970.510 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:32:50.904Z,1520695970.904 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:32:51.304Z,1520695971.304 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:32:51.720Z,1520695971.720 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:32:52.119Z,1520695972.119 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:32:52.496Z,1520695972.496 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:32:52.900Z,1520695972.900 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:32:53.300Z,1520695973.300 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:32:53.696Z,1520695973.696 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:32:54.104Z,1520695974.104 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:32:54.500Z,1520695974.500 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:32:54.897Z,1520695974.897 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:32:55.301Z,1520695975.301 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:32:55.704Z,1520695975.704 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:32:56.101Z,1520695976.101 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:32:56.505Z,1520695976.505 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:32:56.901Z,1520695976.901 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:32:57.306Z,1520695977.306 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:32:57.701Z,1520695977.701 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:32:58.100Z,1520695978.100 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:32:58.506Z,1520695978.506 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:32:58.908Z,1520695978.908 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:32:59.319Z,1520695979.319 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:32:59.708Z,1520695979.708 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:33:00.108Z,1520695980.108 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:33:00.507Z,1520695980.507 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:33:00.910Z,1520695980.910 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:33:01.309Z,1520695981.309 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:33:01.706Z,1520695981.706 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:33:02.105Z,1520695982.105 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:33:02.504Z,1520695982.504 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:33:02.909Z,1520695982.909 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:33:03.308Z,1520695983.308 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:33:03.705Z,1520695983.705 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:33:04.108Z,1520695984.108 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:33:04.508Z,1520695984.508 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:33:04.909Z,1520695984.909 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:33:05.309Z,1520695985.309 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:33:05.705Z,1520695985.705 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:33:06.103Z,1520695986.103 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:33:06.512Z,1520695986.512 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:33:06.905Z,1520695986.905 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:33:07.304Z,1520695987.304 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:33:07.702Z,1520695987.702 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:33:08.112Z,1520695988.112 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:33:08.494Z,1520695988.494 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:33:08.913Z,1520695988.913 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:33:09.296Z,1520695989.296 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:33:09.704Z,1520695989.704 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:33:10.104Z,1520695990.104 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:33:10.496Z,1520695990.496 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:33:10.900Z,1520695990.900 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:33:11.300Z,1520695991.300 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:33:11.701Z,1520695991.701 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:33:12.100Z,1520695992.100 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:33:12.500Z,1520695992.500 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:33:12.896Z,1520695992.896 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:33:13.300Z,1520695993.300 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:33:13.701Z,1520695993.701 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:33:14.096Z,1520695994.096 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:33:14.496Z,1520695994.496 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:33:14.900Z,1520695994.900 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:33:15.300Z,1520695995.300 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:33:15.700Z,1520695995.700 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:33:16.104Z,1520695996.104 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:33:16.501Z,1520695996.501 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:33:16.894Z,1520695996.894 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:33:17.304Z,1520695997.304 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:33:17.700Z,1520695997.700 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:33:18.096Z,1520695998.096 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:33:18.501Z,1520695998.501 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:33:18.905Z,1520695998.905 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:33:19.297Z,1520695999.297 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:33:19.709Z,1520695999.709 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:33:20.108Z,1520696000.108 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:33:20.505Z,1520696000.505 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:33:20.905Z,1520696000.905 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:33:21.309Z,1520696001.309 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:33:21.708Z,1520696001.708 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:33:22.106Z,1520696002.106 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:33:22.499Z,1520696002.499 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:33:22.908Z,1520696002.908 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:33:23.313Z,1520696003.313 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:33:23.708Z,1520696003.708 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:33:24.108Z,1520696004.108 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:33:24.512Z,1520696004.512 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:33:24.908Z,1520696004.908 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:33:25.311Z,1520696005.311 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:33:25.706Z,1520696005.706 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:33:26.109Z,1520696006.109 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:33:26.504Z,1520696006.504 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:33:26.920Z,1520696006.920 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:33:27.295Z,1520696007.295 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:33:27.712Z,1520696007.712 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:33:28.104Z,1520696008.104 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:33:28.512Z,1520696008.512 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:33:28.896Z,1520696008.896 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:33:29.300Z,1520696009.300 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:33:29.696Z,1520696009.696 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:33:30.100Z,1520696010.100 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:33:30.520Z,1520696010.520 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:33:30.912Z,1520696010.912 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:33:31.296Z,1520696011.296 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:33:31.721Z,1520696011.721 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:33:32.096Z,1520696012.096 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:33:32.498Z,1520696012.498 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:33:32.905Z,1520696012.905 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:33:33.304Z,1520696013.304 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:33:33.698Z,1520696013.698 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:33:34.101Z,1520696014.101 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:33:34.501Z,1520696014.501 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:33:34.901Z,1520696014.901 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:33:35.305Z,1520696015.305 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:33:35.705Z,1520696015.705 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:33:36.109Z,1520696016.109 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:33:36.517Z,1520696016.517 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:33:36.913Z,1520696016.913 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:33:37.309Z,1520696017.309 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:33:37.710Z,1520696017.710 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:33:38.106Z,1520696018.106 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:33:38.513Z,1520696018.513 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:33:38.907Z,1520696018.907 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:33:39.312Z,1520696019.312 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:33:39.696Z,1520696019.696 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:33:40.100Z,1520696020.100 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:33:40.512Z,1520696020.512 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:33:40.912Z,1520696020.912 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:33:41.301Z,1520696021.301 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:33:44.573Z,1520696024.573 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:33:44.690Z,1520696024.690 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:33:45.078Z,1520696025.078 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:33:45.472Z,1520696025.472 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:33:45.880Z,1520696025.880 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:33:46.278Z,1520696026.278 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:33:46.671Z,1520696026.671 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:33:47.072Z,1520696027.072 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:33:47.469Z,1520696027.469 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:33:47.868Z,1520696027.868 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:33:48.272Z,1520696028.272 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:33:48.669Z,1520696028.669 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:33:49.073Z,1520696029.073 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:33:49.469Z,1520696029.469 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:33:49.875Z,1520696029.875 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:33:50.273Z,1520696030.273 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:33:50.678Z,1520696030.678 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:33:51.074Z,1520696031.074 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:33:51.468Z,1520696031.468 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:33:51.868Z,1520696031.868 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:33:52.268Z,1520696032.268 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:33:52.664Z,1520696032.664 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:33:53.068Z,1520696033.068 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:33:53.473Z,1520696033.473 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:33:53.872Z,1520696033.872 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:33:54.265Z,1520696034.265 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:33:54.669Z,1520696034.669 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:33:55.073Z,1520696035.073 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:33:55.466Z,1520696035.466 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:33:55.869Z,1520696035.869 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:33:56.273Z,1520696036.273 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:33:56.673Z,1520696036.673 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:33:57.076Z,1520696037.076 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:33:57.489Z,1520696037.489 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:33:57.876Z,1520696037.876 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:33:58.288Z,1520696038.288 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:33:58.680Z,1520696038.680 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:33:59.068Z,1520696039.068 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:33:59.464Z,1520696039.464 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:33:59.868Z,1520696039.868 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:34:00.270Z,1520696040.270 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:34:00.304Z,1520696040.304 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T15:34:00.305Z,1520696040.305 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 128
2018-03-10T15:34:00.305Z,1520696040.305 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-10T15:34:00.344Z,1520696040.344 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-10T15:34:00.668Z,1520696040.668 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:34:00.731Z,1520696040.731 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-10T15:34:00.731Z,1520696040.731 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 128
2018-03-10T15:34:01.068Z,1520696041.068 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:34:01.106Z,1520696041.106 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-10T15:34:01.106Z,1520696041.106 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-10T15:34:01.110Z,1520696041.110 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-10T15:34:01.473Z,1520696041.473 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:34:01.876Z,1520696041.876 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:34:02.273Z,1520696042.273 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:34:02.677Z,1520696042.677 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:34:03.074Z,1520696043.074 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:34:03.477Z,1520696043.477 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:34:03.874Z,1520696043.874 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:34:04.275Z,1520696044.275 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:34:04.668Z,1520696044.668 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:34:05.072Z,1520696045.072 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:34:05.477Z,1520696045.477 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:34:05.868Z,1520696045.868 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:34:06.270Z,1520696046.270 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:34:06.677Z,1520696046.677 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:34:07.064Z,1520696047.064 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:34:07.464Z,1520696047.464 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:34:07.872Z,1520696047.872 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:34:08.269Z,1520696048.269 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:34:08.666Z,1520696048.666 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:34:09.064Z,1520696049.064 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:34:09.470Z,1520696049.470 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:34:09.869Z,1520696049.869 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:34:10.277Z,1520696050.277 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:34:10.673Z,1520696050.673 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:34:11.076Z,1520696051.076 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:34:11.476Z,1520696051.476 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:34:11.881Z,1520696051.881 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:34:12.275Z,1520696052.275 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:34:12.672Z,1520696052.672 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:34:13.069Z,1520696053.069 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:34:13.468Z,1520696053.468 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:34:13.868Z,1520696053.868 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:34:14.268Z,1520696054.268 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:34:14.668Z,1520696054.668 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:34:15.073Z,1520696055.073 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:34:15.468Z,1520696055.468 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:34:15.867Z,1520696055.867 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:34:16.273Z,1520696056.273 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:34:16.677Z,1520696056.677 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:34:17.072Z,1520696057.072 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:34:17.476Z,1520696057.476 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:34:17.876Z,1520696057.876 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:34:18.272Z,1520696058.272 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:34:18.674Z,1520696058.674 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:34:19.072Z,1520696059.072 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:34:19.462Z,1520696059.462 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:34:19.869Z,1520696059.869 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:34:20.269Z,1520696060.269 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:34:20.666Z,1520696060.666 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:34:21.064Z,1520696061.064 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:34:21.477Z,1520696061.477 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:34:21.874Z,1520696061.874 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:34:22.275Z,1520696062.275 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:34:22.672Z,1520696062.672 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:34:23.072Z,1520696063.072 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:34:23.473Z,1520696063.473 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:34:23.880Z,1520696063.880 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:34:24.276Z,1520696064.276 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:34:24.686Z,1520696064.686 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:34:25.081Z,1520696065.081 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:34:25.476Z,1520696065.476 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:34:25.868Z,1520696065.868 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:34:26.269Z,1520696066.269 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:34:26.673Z,1520696066.673 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:34:27.070Z,1520696067.070 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:34:27.473Z,1520696067.473 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:34:27.878Z,1520696067.878 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:34:28.276Z,1520696068.276 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:34:28.673Z,1520696068.673 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:34:29.064Z,1520696069.064 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:34:29.487Z,1520696069.487 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:34:29.868Z,1520696069.868 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:34:30.269Z,1520696070.269 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:34:30.673Z,1520696070.673 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:34:31.071Z,1520696071.071 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:34:31.472Z,1520696071.472 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:34:31.875Z,1520696071.875 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:34:32.276Z,1520696072.276 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:34:32.674Z,1520696072.674 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:34:33.068Z,1520696073.068 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:34:33.472Z,1520696073.472 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:34:33.868Z,1520696073.868 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:34:34.269Z,1520696074.269 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:34:34.676Z,1520696074.676 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:34:35.076Z,1520696075.076 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:34:35.480Z,1520696075.480 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:34:35.876Z,1520696075.876 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:34:36.264Z,1520696076.264 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:34:36.668Z,1520696076.668 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:34:37.080Z,1520696077.080 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:34:37.473Z,1520696077.473 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:34:37.868Z,1520696077.868 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:34:38.272Z,1520696078.272 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:34:38.676Z,1520696078.676 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:34:39.075Z,1520696079.075 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:34:39.480Z,1520696079.480 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:34:39.875Z,1520696079.875 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:34:40.268Z,1520696080.268 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:34:40.664Z,1520696080.664 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:34:41.063Z,1520696081.063 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:34:41.479Z,1520696081.479 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:34:44.655Z,1520696084.655 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:34:44.790Z,1520696084.790 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:34:45.169Z,1520696085.169 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:34:45.566Z,1520696085.566 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:34:45.974Z,1520696085.974 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:34:46.371Z,1520696086.371 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:34:46.776Z,1520696086.776 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:34:47.178Z,1520696087.178 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:34:47.571Z,1520696087.571 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:34:47.977Z,1520696087.977 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:34:48.376Z,1520696088.376 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:34:48.764Z,1520696088.764 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:34:49.177Z,1520696089.177 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:34:49.557Z,1520696089.557 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:34:49.972Z,1520696089.972 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:34:50.354Z,1520696090.354 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:34:50.776Z,1520696090.776 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:34:51.162Z,1520696091.162 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:34:51.557Z,1520696091.557 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:34:51.973Z,1520696091.973 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:34:52.356Z,1520696092.356 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:34:52.766Z,1520696092.766 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:34:53.163Z,1520696093.163 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:34:53.561Z,1520696093.561 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:34:53.961Z,1520696093.961 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:34:54.362Z,1520696094.362 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:34:54.766Z,1520696094.766 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:34:55.172Z,1520696095.172 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:34:55.560Z,1520696095.560 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:34:55.962Z,1520696095.962 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:34:56.360Z,1520696096.360 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:34:56.760Z,1520696096.760 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:34:57.160Z,1520696097.160 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:34:57.564Z,1520696097.564 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:34:57.966Z,1520696097.966 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:34:58.366Z,1520696098.366 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:34:58.771Z,1520696098.771 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:34:59.175Z,1520696099.175 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:34:59.572Z,1520696099.572 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:35:00.007Z,1520696100.007 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:35:00.374Z,1520696100.374 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:35:00.786Z,1520696100.786 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:35:01.156Z,1520696101.156 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:35:01.577Z,1520696101.577 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:35:01.970Z,1520696101.970 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:35:02.371Z,1520696102.371 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:35:02.773Z,1520696102.773 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:35:03.170Z,1520696103.170 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:35:03.556Z,1520696103.556 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:35:03.962Z,1520696103.962 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:35:04.364Z,1520696104.364 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:35:04.764Z,1520696104.764 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:35:05.170Z,1520696105.170 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:35:05.571Z,1520696105.571 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:35:05.968Z,1520696105.968 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:35:06.363Z,1520696106.363 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:35:06.769Z,1520696106.769 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:35:07.178Z,1520696107.178 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:35:07.568Z,1520696107.568 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:35:07.966Z,1520696107.966 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:35:08.370Z,1520696108.370 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:35:08.768Z,1520696108.768 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:35:09.166Z,1520696109.166 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:35:09.574Z,1520696109.574 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:35:09.970Z,1520696109.970 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:35:10.372Z,1520696110.372 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:35:10.772Z,1520696110.772 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:35:11.172Z,1520696111.172 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:35:11.560Z,1520696111.560 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:35:11.976Z,1520696111.976 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:35:12.372Z,1520696112.372 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:35:12.772Z,1520696112.772 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:35:13.160Z,1520696113.160 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:35:13.560Z,1520696113.560 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:35:13.961Z,1520696113.961 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:35:14.388Z,1520696114.388 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:35:14.775Z,1520696114.775 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:35:15.163Z,1520696115.163 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:35:15.561Z,1520696115.561 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:35:15.966Z,1520696115.966 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:35:16.376Z,1520696116.376 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:35:16.768Z,1520696116.768 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:35:17.166Z,1520696117.166 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:35:17.566Z,1520696117.566 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:35:17.962Z,1520696117.962 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:35:18.371Z,1520696118.371 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:35:18.769Z,1520696118.769 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:35:19.172Z,1520696119.172 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:35:19.566Z,1520696119.566 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:35:19.968Z,1520696119.968 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:35:20.372Z,1520696120.372 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:35:20.772Z,1520696120.772 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:35:21.176Z,1520696121.176 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:35:21.572Z,1520696121.572 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:35:21.968Z,1520696121.968 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:35:22.372Z,1520696122.372 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:35:22.756Z,1520696122.756 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:35:23.157Z,1520696123.157 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:35:23.561Z,1520696123.561 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:35:23.956Z,1520696123.956 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:35:24.364Z,1520696124.364 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:35:24.767Z,1520696124.767 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:35:25.163Z,1520696125.163 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:35:25.565Z,1520696125.565 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:35:25.966Z,1520696125.966 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:35:26.367Z,1520696126.367 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:35:26.764Z,1520696126.764 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:35:27.170Z,1520696127.170 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:35:27.566Z,1520696127.566 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:35:27.975Z,1520696127.975 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:35:28.368Z,1520696128.368 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:35:28.791Z,1520696128.791 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:35:29.179Z,1520696129.179 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:35:29.566Z,1520696129.566 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:35:29.974Z,1520696129.974 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:35:30.380Z,1520696130.380 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:35:30.759Z,1520696130.759 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:35:31.163Z,1520696131.163 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:35:31.559Z,1520696131.559 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:35:31.960Z,1520696131.960 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:35:32.369Z,1520696132.369 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:35:32.762Z,1520696132.762 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:35:33.164Z,1520696133.164 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:35:33.560Z,1520696133.560 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:35:33.960Z,1520696133.960 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:35:34.372Z,1520696134.372 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:35:34.765Z,1520696134.765 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:35:35.186Z,1520696135.186 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:35:35.566Z,1520696135.566 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:35:35.969Z,1520696135.969 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:35:36.369Z,1520696136.369 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:35:36.768Z,1520696136.768 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:35:37.171Z,1520696137.171 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:35:37.578Z,1520696137.578 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:35:37.966Z,1520696137.966 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:35:38.369Z,1520696138.369 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:35:38.769Z,1520696138.769 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:35:39.170Z,1520696139.170 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:35:39.568Z,1520696139.568 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:35:39.964Z,1520696139.964 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:35:40.375Z,1520696140.375 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:35:40.406Z,1520696140.406 [CBIT](DEBUG): EFC running - data check-sum false
2018-03-10T15:35:40.771Z,1520696140.771 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:35:41.165Z,1520696141.165 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:35:41.573Z,1520696141.573 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:35:44.880Z,1520696144.880 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:35:45.011Z,1520696145.011 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:35:45.388Z,1520696145.388 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:35:45.788Z,1520696145.788 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:35:46.193Z,1520696146.193 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:35:46.582Z,1520696146.582 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:35:46.982Z,1520696146.982 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:35:47.386Z,1520696147.386 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:35:47.790Z,1520696147.790 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:35:48.192Z,1520696148.192 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:35:48.590Z,1520696148.590 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:35:48.997Z,1520696148.997 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:35:49.391Z,1520696149.391 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:35:49.783Z,1520696149.783 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:35:50.200Z,1520696150.200 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:35:50.580Z,1520696150.580 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:35:50.979Z,1520696150.979 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:35:51.380Z,1520696151.380 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:35:51.788Z,1520696151.788 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:35:52.188Z,1520696152.188 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:35:52.588Z,1520696152.588 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:35:52.988Z,1520696152.988 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:35:53.385Z,1520696153.385 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:35:53.789Z,1520696153.789 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:35:54.189Z,1520696154.189 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:35:54.589Z,1520696154.589 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:35:54.986Z,1520696154.986 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:35:55.388Z,1520696155.388 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:35:55.791Z,1520696155.791 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:35:56.188Z,1520696156.188 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:35:56.589Z,1520696156.589 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:35:56.993Z,1520696156.993 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:35:57.400Z,1520696157.400 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:35:57.789Z,1520696157.789 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:35:58.180Z,1520696158.180 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:35:58.601Z,1520696158.601 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:35:58.976Z,1520696158.976 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:35:59.380Z,1520696159.380 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:35:59.780Z,1520696159.780 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:36:00.176Z,1520696160.176 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:36:00.575Z,1520696160.575 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:36:00.980Z,1520696160.980 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:36:01.381Z,1520696161.381 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:36:01.776Z,1520696161.776 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:36:02.184Z,1520696162.184 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:36:02.580Z,1520696162.580 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:36:02.985Z,1520696162.985 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:36:03.389Z,1520696163.389 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:36:03.789Z,1520696163.789 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:36:04.184Z,1520696164.184 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:36:04.588Z,1520696164.588 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:36:04.988Z,1520696164.988 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:36:05.387Z,1520696165.387 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:36:05.786Z,1520696165.786 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:36:06.192Z,1520696166.192 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:36:06.592Z,1520696166.592 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:36:06.984Z,1520696166.984 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:36:07.384Z,1520696167.384 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:36:07.792Z,1520696167.792 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:36:08.187Z,1520696168.187 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:36:08.592Z,1520696168.592 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:36:08.980Z,1520696168.980 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:36:09.400Z,1520696169.400 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:36:09.779Z,1520696169.779 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:36:10.180Z,1520696170.180 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:36:10.580Z,1520696170.580 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:36:10.988Z,1520696170.988 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:36:11.381Z,1520696171.381 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:36:11.785Z,1520696171.785 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:36:12.181Z,1520696172.181 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:36:12.578Z,1520696172.578 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:36:12.987Z,1520696172.987 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:36:13.389Z,1520696173.389 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:36:13.785Z,1520696173.785 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:36:14.184Z,1520696174.184 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:36:14.589Z,1520696174.589 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:36:14.989Z,1520696174.989 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:36:15.389Z,1520696175.389 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:36:15.794Z,1520696175.794 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:36:16.192Z,1520696176.192 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:36:16.589Z,1520696176.589 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:36:16.989Z,1520696176.989 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:36:17.393Z,1520696177.393 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:36:17.800Z,1520696177.800 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:36:18.176Z,1520696178.176 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:36:18.578Z,1520696178.578 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:36:18.976Z,1520696178.976 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:36:19.379Z,1520696179.379 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:36:19.785Z,1520696179.785 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:36:20.180Z,1520696180.180 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:36:20.584Z,1520696180.584 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:36:20.978Z,1520696180.978 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:36:21.376Z,1520696181.376 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:36:21.780Z,1520696181.780 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:36:22.176Z,1520696182.176 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:36:22.580Z,1520696182.580 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:36:22.980Z,1520696182.980 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:36:23.378Z,1520696183.378 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:36:23.784Z,1520696183.784 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:36:24.180Z,1520696184.180 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:36:24.585Z,1520696184.585 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:36:24.980Z,1520696184.980 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:36:25.384Z,1520696185.384 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:36:25.783Z,1520696185.783 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:36:26.188Z,1520696186.188 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:36:26.585Z,1520696186.585 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:36:26.985Z,1520696186.985 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:36:27.383Z,1520696187.383 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:36:27.784Z,1520696187.784 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:36:28.180Z,1520696188.180 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:36:28.585Z,1520696188.585 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:36:29.005Z,1520696189.005 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:36:29.378Z,1520696189.378 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:36:29.800Z,1520696189.800 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:36:30.180Z,1520696190.180 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:36:30.200Z,1520696190.200 [BPC1](ERROR): Failed to receive battery data
2018-03-10T15:36:30.200Z,1520696190.200 [BPC1] Communications Fault, FailCount= 1
2018-03-10T15:36:30.200Z,1520696190.200 [BPC1](ERROR): Communications Fault
2018-03-10T15:36:30.222Z,1520696190.222 [CBIT](ERROR): Communications Fault in component: BPC1
2018-03-10T15:36:30.580Z,1520696190.580 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:36:30.980Z,1520696190.980 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:36:31.384Z,1520696191.384 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:36:31.431Z,1520696191.431 [CBIT](INFO): Clearing failed state for component BPC1
2018-03-10T15:36:31.431Z,1520696191.431 [BPC1] No Fault, FailCount= 1
2018-03-10T15:36:31.778Z,1520696191.778 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:36:32.180Z,1520696192.180 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:36:32.584Z,1520696192.584 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:36:32.977Z,1520696192.977 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:36:33.375Z,1520696193.375 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:36:33.784Z,1520696193.784 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:36:34.178Z,1520696194.178 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:36:34.580Z,1520696194.580 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:36:34.980Z,1520696194.980 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:36:35.381Z,1520696195.381 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:36:35.789Z,1520696195.789 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:36:36.185Z,1520696196.185 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:36:36.585Z,1520696196.585 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:36:36.988Z,1520696196.988 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:36:37.389Z,1520696197.389 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:36:37.781Z,1520696197.781 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:36:38.188Z,1520696198.188 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:36:38.592Z,1520696198.592 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:36:38.982Z,1520696198.982 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:36:39.388Z,1520696199.388 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:36:39.792Z,1520696199.792 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:36:40.188Z,1520696200.188 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:36:40.588Z,1520696200.588 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:36:40.998Z,1520696200.998 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:36:41.046Z,1520696201.046 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-03-10T15:36:41.046Z,1520696201.046 [Default:CheckIn:C.Wait] Stopped
2018-03-10T15:36:41.046Z,1520696201.046 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-03-10T15:36:41.046Z,1520696201.046 [Default:CheckIn:D] Running Loop=1
2018-03-10T15:36:41.387Z,1520696201.387 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:36:41.407Z,1520696201.407 [Default:CheckIn:D] Stopped
2018-03-10T15:36:41.407Z,1520696201.407 [Default:CheckIn:E] Running Loop=1
2018-03-10T15:36:41.788Z,1520696201.788 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:36:41.808Z,1520696201.808 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 617.391471 min 
2018-03-10T15:36:41.808Z,1520696201.808 [Default:CheckIn:E] Stopped
2018-03-10T15:36:41.808Z,1520696201.808 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-03-10T15:36:41.808Z,1520696201.808 [Default:CheckIn] Stopped
2018-03-10T15:36:41.808Z,1520696201.808 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-03-10T15:36:41.809Z,1520696201.809 [Default:CheckIn](INFO): Running loop #61
2018-03-10T15:36:41.809Z,1520696201.809 [Default:CheckIn] Running Loop=61
2018-03-10T15:36:41.809Z,1520696201.809 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-03-10T15:36:41.809Z,1520696201.809 [Default:CheckIn:Read_GPS] Running Loop=1
2018-03-10T15:36:44.989Z,1520696204.989 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:36:45.078Z,1520696205.078 [NAL9602](INFO): Powering up
2018-03-10T15:36:45.095Z,1520696205.095 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:36:45.461Z,1520696205.461 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:36:45.858Z,1520696205.858 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:36:46.260Z,1520696206.260 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:36:46.658Z,1520696206.658 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:36:47.061Z,1520696207.061 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:36:47.452Z,1520696207.452 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:36:47.864Z,1520696207.864 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:36:48.260Z,1520696208.260 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:36:48.663Z,1520696208.663 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:36:49.061Z,1520696209.061 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:36:49.459Z,1520696209.459 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:36:49.857Z,1520696209.857 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:36:50.268Z,1520696210.268 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:36:50.653Z,1520696210.653 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:36:51.053Z,1520696211.053 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:36:51.457Z,1520696211.457 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:36:51.862Z,1520696211.862 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:36:52.261Z,1520696212.261 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:36:52.660Z,1520696212.660 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:36:53.064Z,1520696213.064 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:36:53.456Z,1520696213.456 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:36:53.858Z,1520696213.858 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:36:54.272Z,1520696214.272 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:36:54.652Z,1520696214.652 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:36:55.052Z,1520696215.052 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:36:55.454Z,1520696215.454 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:36:55.859Z,1520696215.859 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:36:56.247Z,1520696216.247 [NAL9602](INFO): NAL9602 initialized
2018-03-10T15:36:56.264Z,1520696216.264 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:36:56.664Z,1520696216.664 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:36:57.032Z,1520696217.032 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-03-10T15:36:57.032Z,1520696217.032 [NAL9602] Data Fault, FailCount= 3
2018-03-10T15:36:57.032Z,1520696217.032 [NAL9602](ERROR): Data Fault
2018-03-10T15:36:57.066Z,1520696217.066 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:36:57.136Z,1520696217.136 [CBIT](ERROR): Data Fault in component: NAL9602
2018-03-10T15:36:57.432Z,1520696217.432 [NAL9602](INFO): Powering down
2018-03-10T15:36:57.460Z,1520696217.460 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:36:57.850Z,1520696217.850 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:36:58.266Z,1520696218.266 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:36:58.296Z,1520696218.296 [CBIT](INFO): Clearing failed state for component NAL9602
2018-03-10T15:36:58.296Z,1520696218.296 [NAL9602] No Fault, FailCount= 3
2018-03-10T15:36:58.653Z,1520696218.653 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:36:59.052Z,1520696219.052 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:36:59.449Z,1520696219.449 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:36:59.849Z,1520696219.849 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:37:00.256Z,1520696220.256 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:37:00.648Z,1520696220.648 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:37:01.069Z,1520696221.069 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:37:01.447Z,1520696221.447 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:37:01.477Z,1520696221.477 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T15:37:01.477Z,1520696221.477 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 129
2018-03-10T15:37:01.477Z,1520696221.477 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-10T15:37:01.498Z,1520696221.498 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-10T15:37:01.854Z,1520696221.854 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:37:01.867Z,1520696221.867 [BPC1](FAULT): Failed to initialize
2018-03-10T15:37:01.867Z,1520696221.867 [BPC1] Communications Fault, FailCount= 2
2018-03-10T15:37:01.867Z,1520696221.867 [BPC1](ERROR): Communications Fault
2018-03-10T15:37:01.945Z,1520696221.945 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-10T15:37:01.945Z,1520696221.945 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 129
2018-03-10T15:37:01.946Z,1520696221.946 [CBIT](ERROR): Communications Fault in component: BPC1
2018-03-10T15:37:02.264Z,1520696222.264 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:37:02.282Z,1520696222.282 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-10T15:37:02.282Z,1520696222.282 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-10T15:37:02.283Z,1520696222.283 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-10T15:37:02.648Z,1520696222.648 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:37:03.048Z,1520696223.048 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:37:03.106Z,1520696223.106 [CBIT](INFO): Clearing failed state for component BPC1
2018-03-10T15:37:03.106Z,1520696223.106 [BPC1] No Fault, FailCount= 2
2018-03-10T15:37:03.457Z,1520696223.457 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:37:03.856Z,1520696223.856 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:37:04.252Z,1520696224.252 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:37:04.652Z,1520696224.652 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:37:05.060Z,1520696225.060 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:37:05.460Z,1520696225.460 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:37:05.860Z,1520696225.860 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:37:06.261Z,1520696226.261 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:37:06.661Z,1520696226.661 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:37:07.056Z,1520696227.056 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:37:07.456Z,1520696227.456 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:37:07.857Z,1520696227.857 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:37:08.273Z,1520696228.273 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:37:08.648Z,1520696228.648 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:37:09.048Z,1520696229.048 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:37:09.457Z,1520696229.457 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:37:09.857Z,1520696229.857 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:37:10.256Z,1520696230.256 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:37:10.660Z,1520696230.660 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:37:11.050Z,1520696231.050 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:37:11.464Z,1520696231.464 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:37:11.860Z,1520696231.860 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:37:12.252Z,1520696232.252 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:37:12.664Z,1520696232.664 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:37:13.053Z,1520696233.053 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:37:13.450Z,1520696233.450 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:37:13.856Z,1520696233.856 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:37:14.260Z,1520696234.260 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:37:14.652Z,1520696234.652 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:37:15.060Z,1520696235.060 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:37:15.456Z,1520696235.456 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:37:15.858Z,1520696235.858 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:37:16.248Z,1520696236.248 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:37:16.672Z,1520696236.672 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:37:17.048Z,1520696237.048 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:37:17.456Z,1520696237.456 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:37:17.858Z,1520696237.858 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:37:18.261Z,1520696238.261 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:37:18.661Z,1520696238.661 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:37:19.060Z,1520696239.060 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:37:19.456Z,1520696239.456 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:37:19.856Z,1520696239.856 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:37:20.256Z,1520696240.256 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:37:20.648Z,1520696240.648 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:37:21.056Z,1520696241.056 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:37:21.468Z,1520696241.468 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:37:21.859Z,1520696241.859 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:37:22.253Z,1520696242.253 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:37:22.652Z,1520696242.652 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:37:23.056Z,1520696243.056 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:37:23.464Z,1520696243.464 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:37:23.872Z,1520696243.872 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:37:24.260Z,1520696244.260 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:37:24.660Z,1520696244.660 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:37:25.060Z,1520696245.060 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:37:25.456Z,1520696245.456 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:37:25.857Z,1520696245.857 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:37:26.257Z,1520696246.257 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:37:26.653Z,1520696246.653 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:37:27.057Z,1520696247.057 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:37:27.446Z,1520696247.446 [NAL9602](INFO): Powering up NAL9602
2018-03-10T15:37:27.463Z,1520696247.463 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:37:27.856Z,1520696247.856 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:37:28.260Z,1520696248.260 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:37:28.660Z,1520696248.660 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:37:29.058Z,1520696249.058 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:37:29.455Z,1520696249.455 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:37:29.867Z,1520696249.867 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:37:30.252Z,1520696250.252 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:37:30.653Z,1520696250.653 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:37:31.057Z,1520696251.057 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:37:31.457Z,1520696251.457 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:37:31.856Z,1520696251.856 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:37:32.260Z,1520696252.260 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:37:32.658Z,1520696252.658 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:37:33.065Z,1520696253.065 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:37:33.459Z,1520696253.459 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:37:33.848Z,1520696253.848 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:37:33.867Z,1520696253.867 [BPC1](FAULT): Failed to initialize
2018-03-10T15:37:33.867Z,1520696253.867 [BPC1] Communications Fault, FailCount= 3
2018-03-10T15:37:33.867Z,1520696253.867 [BPC1](ERROR): Communications Fault
2018-03-10T15:37:33.927Z,1520696253.927 [CBIT](ERROR): Communications Fault in component: BPC1
2018-03-10T15:37:34.265Z,1520696254.265 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:37:34.658Z,1520696254.658 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:37:35.095Z,1520696255.095 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:37:35.126Z,1520696255.126 [CBIT](INFO): Clearing failed state for component BPC1
2018-03-10T15:37:35.126Z,1520696255.126 [BPC1] No Fault, FailCount= 3
2018-03-10T15:37:35.458Z,1520696255.458 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:37:35.861Z,1520696255.861 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:37:36.261Z,1520696256.261 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:37:36.661Z,1520696256.661 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:37:37.062Z,1520696257.062 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:37:37.456Z,1520696257.456 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:37:37.861Z,1520696257.861 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:37:38.279Z,1520696258.279 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:37:38.636Z,1520696258.636 [NAL9602](INFO): NAL9602 initialized
2018-03-10T15:37:38.653Z,1520696258.653 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:37:39.062Z,1520696259.062 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:37:39.482Z,1520696259.482 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:37:39.885Z,1520696259.885 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:37:40.280Z,1520696260.280 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:37:40.660Z,1520696260.660 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:37:41.064Z,1520696261.064 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:37:41.461Z,1520696261.461 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:37:41.890Z,1520696261.890 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:37:45.415Z,1520696265.415 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:37:45.570Z,1520696265.570 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:37:45.923Z,1520696265.923 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:37:46.312Z,1520696266.312 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:37:46.728Z,1520696266.728 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:37:47.127Z,1520696267.127 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:37:47.527Z,1520696267.527 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:37:47.930Z,1520696267.930 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:37:48.317Z,1520696268.317 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:37:48.701Z,1520696268.701 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:37:49.131Z,1520696269.131 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:37:49.532Z,1520696269.532 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:37:49.939Z,1520696269.939 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:37:50.311Z,1520696270.311 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:37:50.728Z,1520696270.728 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:37:51.137Z,1520696271.137 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:37:51.532Z,1520696271.532 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:37:51.928Z,1520696271.928 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:37:52.341Z,1520696272.341 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:37:52.752Z,1520696272.752 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:37:53.133Z,1520696273.133 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:37:53.501Z,1520696273.501 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:37:53.901Z,1520696273.901 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:37:54.333Z,1520696274.333 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:37:54.701Z,1520696274.701 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:37:55.101Z,1520696275.101 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:37:55.505Z,1520696275.505 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:37:55.901Z,1520696275.901 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:37:56.301Z,1520696276.301 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:37:56.705Z,1520696276.705 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:37:57.158Z,1520696277.158 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:37:57.545Z,1520696277.545 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:37:57.939Z,1520696277.939 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:37:58.344Z,1520696278.344 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:37:58.729Z,1520696278.729 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:37:59.143Z,1520696279.143 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:37:59.514Z,1520696279.514 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:37:59.906Z,1520696279.906 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:38:00.334Z,1520696280.334 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:38:00.717Z,1520696280.717 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:38:01.119Z,1520696281.119 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:38:01.514Z,1520696281.514 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:38:01.926Z,1520696281.926 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:38:02.331Z,1520696282.331 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:38:02.728Z,1520696282.728 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:38:03.124Z,1520696283.124 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:38:03.526Z,1520696283.526 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:38:03.905Z,1520696283.905 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:38:04.300Z,1520696284.300 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:38:04.705Z,1520696284.705 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:38:05.130Z,1520696285.130 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:38:05.504Z,1520696285.504 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:38:05.541Z,1520696285.541 [BPC1](FAULT): Failed to initialize
2018-03-10T15:38:05.541Z,1520696285.541 [BPC1] Communications Fault, FailCount= 4
2018-03-10T15:38:05.541Z,1520696285.541 [BPC1](ERROR): Communications Fault
2018-03-10T15:38:05.598Z,1520696285.598 [CBIT](ERROR): Communications Fault in component: BPC1
2018-03-10T15:38:05.938Z,1520696285.938 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:38:06.333Z,1520696286.333 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:38:06.713Z,1520696286.713 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:38:06.765Z,1520696286.765 [CBIT](INFO): Clearing failed state for component BPC1
2018-03-10T15:38:06.765Z,1520696286.765 [BPC1] No Fault, FailCount= 4
2018-03-10T15:38:07.126Z,1520696287.126 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:38:07.546Z,1520696287.546 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:38:07.924Z,1520696287.924 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:38:08.339Z,1520696288.339 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:38:08.739Z,1520696288.739 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:38:09.113Z,1520696289.113 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:38:09.518Z,1520696289.518 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:38:09.923Z,1520696289.923 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:38:10.316Z,1520696290.316 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:38:10.714Z,1520696290.714 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:38:11.117Z,1520696291.117 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:38:11.509Z,1520696291.509 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:38:11.948Z,1520696291.948 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:38:12.324Z,1520696292.324 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:38:12.743Z,1520696292.743 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:38:13.143Z,1520696293.143 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:38:13.540Z,1520696293.540 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:38:13.936Z,1520696293.936 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:38:14.333Z,1520696294.333 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:38:14.714Z,1520696294.714 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:38:15.124Z,1520696295.124 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:38:15.541Z,1520696295.541 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:38:15.922Z,1520696295.922 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:38:16.325Z,1520696296.325 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:38:16.716Z,1520696296.716 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:38:17.125Z,1520696297.125 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:38:17.524Z,1520696297.524 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:38:17.927Z,1520696297.927 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:38:18.328Z,1520696298.328 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:38:18.741Z,1520696298.741 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:38:19.122Z,1520696299.122 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:38:19.558Z,1520696299.558 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:38:19.949Z,1520696299.949 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:38:20.305Z,1520696300.305 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:38:20.728Z,1520696300.728 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:38:21.146Z,1520696301.146 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:38:21.540Z,1520696301.540 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:38:21.910Z,1520696301.910 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:38:22.332Z,1520696302.332 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:38:22.729Z,1520696302.729 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:38:23.132Z,1520696303.132 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:38:23.536Z,1520696303.536 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:38:23.931Z,1520696303.931 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:38:24.336Z,1520696304.336 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:38:24.700Z,1520696304.700 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:38:25.101Z,1520696305.101 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:38:25.504Z,1520696305.504 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:38:25.910Z,1520696305.910 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:38:26.298Z,1520696306.298 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:38:26.704Z,1520696306.704 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:38:27.153Z,1520696307.153 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:38:27.502Z,1520696307.502 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:38:27.921Z,1520696307.921 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:38:28.348Z,1520696308.348 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:38:28.725Z,1520696308.725 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:38:29.126Z,1520696309.126 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:38:29.540Z,1520696309.540 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:38:29.901Z,1520696309.901 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:38:30.323Z,1520696310.323 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:38:30.743Z,1520696310.743 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:38:31.122Z,1520696311.122 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:38:31.519Z,1520696311.519 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:38:31.913Z,1520696311.913 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:38:32.305Z,1520696312.305 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:38:32.727Z,1520696312.727 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:38:33.118Z,1520696313.118 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:38:33.522Z,1520696313.522 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:38:33.926Z,1520696313.926 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:38:34.329Z,1520696314.329 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:38:34.746Z,1520696314.746 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:38:35.118Z,1520696315.118 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:38:35.528Z,1520696315.528 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:38:35.904Z,1520696315.904 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:38:36.345Z,1520696316.345 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:38:36.744Z,1520696316.744 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:38:37.101Z,1520696317.101 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:38:37.531Z,1520696317.531 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:38:37.905Z,1520696317.905 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:38:38.305Z,1520696318.305 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:38:38.739Z,1520696318.739 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:38:39.126Z,1520696319.126 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:38:39.536Z,1520696319.536 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:38:39.938Z,1520696319.938 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:38:40.315Z,1520696320.315 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:38:40.712Z,1520696320.712 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:38:41.112Z,1520696321.112 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:38:41.511Z,1520696321.511 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:38:41.934Z,1520696321.934 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:38:45.193Z,1520696325.193 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:38:45.332Z,1520696325.332 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:38:45.695Z,1520696325.695 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:38:46.091Z,1520696326.091 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:38:46.482Z,1520696326.482 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:38:46.882Z,1520696326.882 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:38:47.285Z,1520696327.285 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:38:47.677Z,1520696327.677 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:38:48.086Z,1520696328.086 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:38:48.481Z,1520696328.481 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:38:48.881Z,1520696328.881 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:38:49.280Z,1520696329.280 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:38:49.690Z,1520696329.690 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:38:50.090Z,1520696330.090 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:38:50.496Z,1520696330.496 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:38:50.896Z,1520696330.896 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:38:51.291Z,1520696331.291 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:38:51.688Z,1520696331.688 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:38:52.089Z,1520696332.089 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:38:52.483Z,1520696332.483 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:38:52.894Z,1520696332.894 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:38:53.290Z,1520696333.290 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:38:53.677Z,1520696333.677 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:38:54.091Z,1520696334.091 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:38:54.494Z,1520696334.494 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:38:54.877Z,1520696334.877 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:38:55.292Z,1520696335.292 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:38:55.692Z,1520696335.692 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:38:56.096Z,1520696336.096 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:38:56.491Z,1520696336.491 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:38:56.873Z,1520696336.873 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:38:57.277Z,1520696337.277 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:38:57.688Z,1520696337.688 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:38:58.085Z,1520696338.085 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:38:58.481Z,1520696338.480 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:38:58.878Z,1520696338.878 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:38:59.281Z,1520696339.281 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:38:59.680Z,1520696339.680 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:39:00.081Z,1520696340.081 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:39:00.491Z,1520696340.491 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:39:00.886Z,1520696340.886 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:39:01.286Z,1520696341.286 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:39:01.704Z,1520696341.704 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:39:02.069Z,1520696342.069 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:39:02.480Z,1520696342.480 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:39:02.876Z,1520696342.876 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:39:03.269Z,1520696343.269 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:39:03.680Z,1520696343.680 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:39:04.093Z,1520696344.093 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:39:04.469Z,1520696344.469 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:39:04.883Z,1520696344.883 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:39:05.296Z,1520696345.296 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:39:05.691Z,1520696345.691 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:39:06.073Z,1520696346.073 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:39:06.473Z,1520696346.473 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:39:06.873Z,1520696346.873 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:39:07.289Z,1520696347.289 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:39:07.673Z,1520696347.673 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:39:08.073Z,1520696348.073 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:39:08.497Z,1520696348.497 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:39:08.897Z,1520696348.897 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:39:09.293Z,1520696349.293 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:39:09.695Z,1520696349.695 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:39:10.073Z,1520696350.073 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:39:10.469Z,1520696350.469 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:39:10.873Z,1520696350.873 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:39:11.277Z,1520696351.277 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:39:11.669Z,1520696351.669 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:39:12.076Z,1520696352.076 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:39:12.477Z,1520696352.477 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:39:12.881Z,1520696352.881 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:39:13.277Z,1520696353.277 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:39:13.676Z,1520696353.676 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:39:14.073Z,1520696354.073 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:39:14.480Z,1520696354.480 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:39:14.882Z,1520696354.882 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:39:15.272Z,1520696355.272 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:39:15.680Z,1520696355.680 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:39:16.081Z,1520696356.081 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:39:16.484Z,1520696356.484 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:39:16.893Z,1520696356.893 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:39:17.293Z,1520696357.293 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:39:17.695Z,1520696357.695 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:39:18.072Z,1520696358.072 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:39:18.472Z,1520696358.472 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:39:18.873Z,1520696358.873 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:39:19.284Z,1520696359.284 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:39:19.673Z,1520696359.673 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:39:20.073Z,1520696360.073 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:39:20.476Z,1520696360.476 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:39:20.877Z,1520696360.877 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:39:21.293Z,1520696361.293 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:39:21.690Z,1520696361.690 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:39:22.092Z,1520696362.092 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:39:22.473Z,1520696362.473 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:39:22.872Z,1520696362.872 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:39:23.268Z,1520696363.268 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:39:23.678Z,1520696363.678 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:39:24.072Z,1520696364.072 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:39:24.468Z,1520696364.468 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:39:24.876Z,1520696364.876 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:39:25.272Z,1520696365.272 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:39:25.672Z,1520696365.672 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:39:26.097Z,1520696366.097 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:39:26.483Z,1520696366.483 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:39:26.887Z,1520696366.887 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:39:27.284Z,1520696367.284 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:39:27.671Z,1520696367.671 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:39:28.080Z,1520696368.080 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:39:28.478Z,1520696368.478 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:39:28.881Z,1520696368.881 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:39:29.277Z,1520696369.277 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:39:29.678Z,1520696369.678 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:39:30.080Z,1520696370.080 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:39:30.482Z,1520696370.482 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:39:30.882Z,1520696370.882 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:39:31.286Z,1520696371.286 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:39:31.691Z,1520696371.691 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:39:32.091Z,1520696372.091 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:39:32.491Z,1520696372.491 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:39:32.881Z,1520696372.881 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:39:33.281Z,1520696373.281 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:39:33.680Z,1520696373.680 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:39:34.081Z,1520696374.081 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:39:34.478Z,1520696374.478 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:39:34.879Z,1520696374.879 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:39:35.293Z,1520696375.293 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:39:35.673Z,1520696375.673 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:39:36.095Z,1520696376.095 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:39:36.486Z,1520696376.486 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:39:36.894Z,1520696376.894 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:39:37.288Z,1520696377.288 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:39:37.668Z,1520696377.668 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:39:38.073Z,1520696378.073 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:39:38.472Z,1520696378.472 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:39:38.872Z,1520696378.872 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:39:39.277Z,1520696379.277 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:39:39.671Z,1520696379.671 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:39:40.072Z,1520696380.072 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:39:40.473Z,1520696380.473 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:39:40.880Z,1520696380.880 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:39:41.287Z,1520696381.287 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:39:41.687Z,1520696381.687 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:39:42.105Z,1520696382.105 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:39:42.483Z,1520696382.483 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:39:42.877Z,1520696382.877 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:39:46.024Z,1520696386.024 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:39:46.139Z,1520696386.139 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:39:46.544Z,1520696386.544 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:39:46.944Z,1520696386.944 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:39:47.335Z,1520696387.335 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:39:47.740Z,1520696387.740 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:39:48.126Z,1520696388.126 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:39:48.530Z,1520696388.530 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:39:48.925Z,1520696388.925 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:39:49.325Z,1520696389.325 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:39:49.720Z,1520696389.720 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:39:50.129Z,1520696390.129 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:39:50.523Z,1520696390.523 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:39:50.930Z,1520696390.930 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:39:51.324Z,1520696391.324 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:39:51.740Z,1520696391.740 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:39:52.128Z,1520696392.128 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:39:52.537Z,1520696392.537 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:39:52.938Z,1520696392.938 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:39:53.314Z,1520696393.314 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:39:53.716Z,1520696393.716 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:39:54.139Z,1520696394.139 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:39:54.517Z,1520696394.517 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:39:54.920Z,1520696394.920 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:39:55.316Z,1520696395.316 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:39:55.721Z,1520696395.721 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:39:56.116Z,1520696396.116 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:39:56.517Z,1520696396.517 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:39:56.941Z,1520696396.941 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:39:57.344Z,1520696397.344 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:39:57.731Z,1520696397.731 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:39:58.140Z,1520696398.140 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:39:58.516Z,1520696398.516 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:39:58.917Z,1520696398.917 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:39:59.316Z,1520696399.316 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:39:59.717Z,1520696399.717 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:40:00.117Z,1520696400.117 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:40:00.522Z,1520696400.522 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:40:00.932Z,1520696400.932 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:40:01.322Z,1520696401.322 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:40:01.725Z,1520696401.725 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:40:02.131Z,1520696402.131 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:40:02.539Z,1520696402.539 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:40:02.575Z,1520696402.575 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T15:40:02.575Z,1520696402.575 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 130
2018-03-10T15:40:02.575Z,1520696402.575 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-10T15:40:02.587Z,1520696402.587 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-10T15:40:02.923Z,1520696402.923 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:40:02.969Z,1520696402.969 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-10T15:40:02.969Z,1520696402.969 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 130
2018-03-10T15:40:03.331Z,1520696403.331 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:40:03.349Z,1520696403.349 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-10T15:40:03.350Z,1520696403.350 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-10T15:40:03.350Z,1520696403.350 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-10T15:40:03.725Z,1520696403.725 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:40:04.116Z,1520696404.116 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:40:04.529Z,1520696404.529 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:40:04.921Z,1520696404.921 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:40:05.321Z,1520696405.321 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:40:05.734Z,1520696405.734 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:40:06.133Z,1520696406.133 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:40:06.516Z,1520696406.516 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:40:06.933Z,1520696406.933 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:40:07.335Z,1520696407.335 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:40:07.731Z,1520696407.731 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:40:08.135Z,1520696408.135 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:40:08.536Z,1520696408.536 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:40:08.928Z,1520696408.928 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:40:09.324Z,1520696409.324 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:40:09.729Z,1520696409.729 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:40:10.120Z,1520696410.120 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:40:10.523Z,1520696410.523 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:40:10.925Z,1520696410.925 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:40:11.313Z,1520696411.313 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:40:11.723Z,1520696411.723 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:40:12.126Z,1520696412.126 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:40:12.533Z,1520696412.533 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:40:12.935Z,1520696412.935 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:40:13.344Z,1520696413.344 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:40:13.731Z,1520696413.731 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:40:14.117Z,1520696414.117 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:40:14.517Z,1520696414.517 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:40:14.928Z,1520696414.928 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:40:15.317Z,1520696415.317 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:40:15.717Z,1520696415.717 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:40:16.113Z,1520696416.113 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:40:16.516Z,1520696416.516 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:40:16.917Z,1520696416.917 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:40:17.321Z,1520696417.321 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:40:17.727Z,1520696417.727 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:40:18.127Z,1520696418.127 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:40:18.527Z,1520696418.527 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:40:18.943Z,1520696418.943 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:40:19.329Z,1520696419.329 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:40:19.722Z,1520696419.722 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:40:20.131Z,1520696420.131 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:40:20.526Z,1520696420.526 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:40:20.925Z,1520696420.925 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:40:21.324Z,1520696421.324 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:40:21.726Z,1520696421.726 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:40:22.121Z,1520696422.121 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:40:22.521Z,1520696422.521 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:40:22.936Z,1520696422.936 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:40:23.334Z,1520696423.334 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:40:23.739Z,1520696423.739 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:40:24.132Z,1520696424.132 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:40:24.517Z,1520696424.517 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:40:24.917Z,1520696424.917 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:40:25.338Z,1520696425.338 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:40:25.713Z,1520696425.713 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:40:26.136Z,1520696426.136 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:40:26.538Z,1520696426.538 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:40:26.913Z,1520696426.913 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:40:27.335Z,1520696427.335 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:40:27.717Z,1520696427.717 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:40:28.123Z,1520696428.123 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:40:28.540Z,1520696428.540 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:40:28.949Z,1520696428.949 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:40:29.343Z,1520696429.343 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:40:29.725Z,1520696429.725 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:40:30.118Z,1520696430.118 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:40:30.522Z,1520696430.522 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:40:30.926Z,1520696430.926 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:40:31.325Z,1520696431.325 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:40:31.722Z,1520696431.722 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:40:32.125Z,1520696432.125 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:40:32.526Z,1520696432.526 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:40:32.925Z,1520696432.925 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:40:33.335Z,1520696433.335 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:40:33.736Z,1520696433.736 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:40:34.136Z,1520696434.136 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:40:34.534Z,1520696434.534 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:40:34.923Z,1520696434.923 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:40:35.313Z,1520696435.313 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:40:35.716Z,1520696435.716 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:40:36.127Z,1520696436.127 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:40:36.528Z,1520696436.528 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:40:36.916Z,1520696436.916 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:40:37.313Z,1520696437.313 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:40:37.717Z,1520696437.717 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:40:38.120Z,1520696438.120 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:40:38.540Z,1520696438.540 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:40:38.936Z,1520696438.936 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:40:39.348Z,1520696439.348 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:40:39.723Z,1520696439.723 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:40:40.117Z,1520696440.117 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:40:40.516Z,1520696440.516 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:40:40.920Z,1520696440.920 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:40:41.320Z,1520696441.320 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:40:41.716Z,1520696441.716 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:40:42.117Z,1520696442.117 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:40:45.396Z,1520696445.396 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:40:45.548Z,1520696445.548 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:40:45.885Z,1520696445.885 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:40:46.271Z,1520696446.271 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:40:46.666Z,1520696446.666 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:40:47.066Z,1520696447.066 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:40:47.473Z,1520696447.473 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:40:47.864Z,1520696447.864 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:40:48.264Z,1520696448.264 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:40:48.668Z,1520696448.668 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:40:49.067Z,1520696449.067 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:40:49.478Z,1520696449.478 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:40:49.870Z,1520696449.870 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:40:50.275Z,1520696450.275 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:40:50.676Z,1520696450.676 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:40:51.067Z,1520696451.067 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:40:51.476Z,1520696451.476 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:40:51.861Z,1520696451.861 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:40:52.278Z,1520696452.278 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:40:52.661Z,1520696452.661 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:40:53.061Z,1520696453.061 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:40:53.465Z,1520696453.465 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:40:53.866Z,1520696453.866 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:40:54.269Z,1520696454.269 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:40:54.669Z,1520696454.669 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:40:55.066Z,1520696455.066 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:40:55.479Z,1520696455.479 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:40:55.883Z,1520696455.883 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:40:56.280Z,1520696456.280 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:40:56.683Z,1520696456.683 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:40:57.070Z,1520696457.070 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:40:57.470Z,1520696457.470 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:40:57.865Z,1520696457.865 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:40:58.273Z,1520696458.273 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:40:58.666Z,1520696458.666 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:40:59.069Z,1520696459.069 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:40:59.473Z,1520696459.473 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:40:59.871Z,1520696459.871 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:41:00.260Z,1520696460.260 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:41:00.682Z,1520696460.682 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:41:01.081Z,1520696461.081 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:41:01.475Z,1520696461.475 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:41:01.883Z,1520696461.883 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:41:02.269Z,1520696462.269 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:41:02.666Z,1520696462.666 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:41:03.069Z,1520696463.069 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:41:03.454Z,1520696463.454 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:41:03.868Z,1520696463.868 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:41:04.269Z,1520696464.269 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:41:04.657Z,1520696464.657 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:41:05.064Z,1520696465.064 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:41:05.470Z,1520696465.470 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:41:05.884Z,1520696465.884 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:41:06.283Z,1520696466.283 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:41:06.681Z,1520696466.681 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:41:07.080Z,1520696467.080 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:41:07.470Z,1520696467.470 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:41:07.870Z,1520696467.870 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:41:08.269Z,1520696468.269 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:41:08.668Z,1520696468.668 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:41:09.061Z,1520696469.061 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:41:09.472Z,1520696469.472 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:41:09.861Z,1520696469.861 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:41:10.261Z,1520696470.261 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:41:10.665Z,1520696470.665 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:41:11.086Z,1520696471.086 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:41:11.479Z,1520696471.479 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:41:11.879Z,1520696471.879 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:41:12.279Z,1520696472.279 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:41:12.666Z,1520696472.666 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:41:13.061Z,1520696473.061 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:41:13.468Z,1520696473.468 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:41:13.868Z,1520696473.868 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:41:14.263Z,1520696474.263 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:41:14.659Z,1520696474.659 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:41:15.061Z,1520696475.061 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:41:15.461Z,1520696475.461 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:41:15.871Z,1520696475.871 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:41:16.286Z,1520696476.286 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:41:16.679Z,1520696476.679 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:41:17.075Z,1520696477.075 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:41:17.483Z,1520696477.483 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:41:17.861Z,1520696477.861 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:41:18.268Z,1520696478.268 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:41:18.671Z,1520696478.671 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:41:19.073Z,1520696479.073 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:41:19.479Z,1520696479.479 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:41:19.876Z,1520696479.876 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:41:20.265Z,1520696480.265 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:41:20.672Z,1520696480.672 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:41:21.064Z,1520696481.064 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:41:21.471Z,1520696481.471 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:41:21.876Z,1520696481.876 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:41:22.276Z,1520696482.276 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:41:22.688Z,1520696482.688 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:41:23.068Z,1520696483.068 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:41:23.468Z,1520696483.468 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:41:23.866Z,1520696483.866 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:41:24.264Z,1520696484.264 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:41:24.657Z,1520696484.657 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:41:25.064Z,1520696485.064 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:41:25.460Z,1520696485.460 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:41:25.856Z,1520696485.856 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:41:26.265Z,1520696486.265 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:41:26.682Z,1520696486.682 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:41:27.081Z,1520696487.081 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:41:27.467Z,1520696487.467 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:41:27.871Z,1520696487.871 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:41:28.268Z,1520696488.268 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:41:28.669Z,1520696488.669 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:41:29.073Z,1520696489.073 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:41:29.463Z,1520696489.463 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:41:29.865Z,1520696489.865 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:41:30.268Z,1520696490.268 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:41:30.660Z,1520696490.660 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:41:31.061Z,1520696491.061 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:41:31.460Z,1520696491.460 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:41:31.884Z,1520696491.884 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:41:32.285Z,1520696492.285 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:41:32.686Z,1520696492.686 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:41:33.071Z,1520696493.071 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:41:33.465Z,1520696493.465 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:41:33.866Z,1520696493.866 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:41:34.265Z,1520696494.265 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:41:34.669Z,1520696494.669 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:41:35.065Z,1520696495.065 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:41:35.465Z,1520696495.465 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:41:35.864Z,1520696495.864 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:41:36.280Z,1520696496.280 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:41:36.660Z,1520696496.660 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:41:37.078Z,1520696497.078 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:41:37.480Z,1520696497.480 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:41:37.885Z,1520696497.885 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:41:38.284Z,1520696498.284 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:41:38.672Z,1520696498.672 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:41:39.065Z,1520696499.065 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:41:39.469Z,1520696499.469 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:41:39.862Z,1520696499.862 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:41:40.268Z,1520696500.268 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:41:40.670Z,1520696500.670 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:41:41.065Z,1520696501.065 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:41:41.474Z,1520696501.474 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:41:41.869Z,1520696501.869 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:41:41.894Z,1520696501.894 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-03-10T15:36:41.8Z
2018-03-10T15:41:41.894Z,1520696501.894 [Default:CheckIn:Read_GPS] Stopped
2018-03-10T15:41:41.895Z,1520696501.895 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-03-10T15:41:42.277Z,1520696502.277 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:41:46.988Z,1520696506.988 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:41:47.241Z,1520696507.241 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:41:47.575Z,1520696507.575 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20180310T051512/Courier0244.lzma
2018-03-10T15:41:47.611Z,1520696507.611 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:41:48.001Z,1520696508.001 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:41:48.372Z,1520696508.372 [DataOverHttps](INFO): Moved sent file to Logs/20180310T051512/Courier0244.lzma.bak
2018-03-10T15:41:48.372Z,1520696508.372 [DataOverHttps](INFO): SBD MOMSN=8005789
2018-03-10T15:41:48.399Z,1520696508.399 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:41:49.456Z,1520696509.456 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:41:49.662Z,1520696509.662 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:41:56.572Z,1520696516.572 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:41:56.772Z,1520696516.772 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:41:57.159Z,1520696517.159 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:41:57.566Z,1520696517.566 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:41:57.988Z,1520696517.988 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:41:58.364Z,1520696518.364 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:42:01.595Z,1520696521.595 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:42:01.732Z,1520696521.732 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:42:02.065Z,1520696522.065 [DataOverHttps](INFO): Sending 244 bytes from file Logs/20180310T051512/Express0245.lzma
2018-03-10T15:42:02.099Z,1520696522.099 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:42:02.487Z,1520696522.487 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:42:02.854Z,1520696522.854 [DataOverHttps](INFO): Moved sent file to Logs/20180310T051512/Express0245.lzma.bak
2018-03-10T15:42:02.854Z,1520696522.854 [DataOverHttps](INFO): SBD MOMSN=8005791
2018-03-10T15:42:02.888Z,1520696522.888 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:42:03.552Z,1520696523.552 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:42:03.583Z,1520696523.583 [Default:CheckIn:Read_Iridium] Stopped
2018-03-10T15:42:03.583Z,1520696523.583 [Default:CheckIn:C.Wait] Running Loop=1
2018-03-10T15:42:03.583Z,1520696523.583 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-03-10T15:42:03.674Z,1520696523.674 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:42:04.072Z,1520696524.072 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:42:07.448Z,1520696527.448 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:42:07.587Z,1520696527.587 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:42:07.976Z,1520696527.976 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:42:08.355Z,1520696528.355 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:42:08.757Z,1520696528.757 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:42:09.157Z,1520696529.157 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:42:09.554Z,1520696529.554 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:42:09.962Z,1520696529.962 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:42:10.357Z,1520696530.357 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:42:10.763Z,1520696530.763 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:42:11.175Z,1520696531.175 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:42:11.561Z,1520696531.561 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:42:11.949Z,1520696531.949 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:42:12.377Z,1520696532.377 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:42:12.778Z,1520696532.778 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:42:13.179Z,1520696533.179 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:42:13.574Z,1520696533.574 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:42:13.965Z,1520696533.965 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:42:14.349Z,1520696534.349 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:42:14.774Z,1520696534.774 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:42:15.153Z,1520696535.153 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:42:15.549Z,1520696535.549 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:42:15.949Z,1520696535.949 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:42:16.349Z,1520696536.349 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:42:16.753Z,1520696536.753 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:42:17.157Z,1520696537.157 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:42:17.570Z,1520696537.570 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:42:17.967Z,1520696537.967 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:42:18.376Z,1520696538.376 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:42:18.768Z,1520696538.768 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:42:19.157Z,1520696539.157 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:42:19.561Z,1520696539.561 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:42:19.960Z,1520696539.960 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:42:20.359Z,1520696540.359 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:42:20.775Z,1520696540.775 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:42:21.161Z,1520696541.161 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:42:21.569Z,1520696541.569 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:42:21.953Z,1520696541.953 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:42:22.348Z,1520696542.348 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:42:22.772Z,1520696542.772 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:42:23.172Z,1520696543.172 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:42:23.569Z,1520696543.569 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:42:23.971Z,1520696543.971 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:42:24.349Z,1520696544.349 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:42:24.753Z,1520696544.753 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:42:25.149Z,1520696545.149 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:42:25.577Z,1520696545.577 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:42:25.974Z,1520696545.974 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:42:26.369Z,1520696546.369 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:42:26.748Z,1520696546.748 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:42:27.159Z,1520696547.159 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:42:27.572Z,1520696547.572 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:42:27.971Z,1520696547.971 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:42:28.368Z,1520696548.368 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:42:28.766Z,1520696548.766 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:42:29.163Z,1520696549.163 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:42:29.562Z,1520696549.562 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:42:29.962Z,1520696549.962 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:42:30.357Z,1520696550.357 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:42:30.756Z,1520696550.756 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:42:31.158Z,1520696551.158 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:42:31.561Z,1520696551.561 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:42:31.962Z,1520696551.962 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:42:32.357Z,1520696552.357 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:42:32.758Z,1520696552.758 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:42:33.164Z,1520696553.164 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:42:33.577Z,1520696553.577 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:42:33.979Z,1520696553.979 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:42:34.376Z,1520696554.376 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:42:34.745Z,1520696554.745 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:42:35.157Z,1520696555.157 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:42:35.576Z,1520696555.576 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:42:35.953Z,1520696555.953 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:42:36.358Z,1520696556.358 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:42:36.749Z,1520696556.749 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:42:37.155Z,1520696557.155 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:42:37.561Z,1520696557.561 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:42:37.948Z,1520696557.948 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:42:38.372Z,1520696558.372 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:42:38.771Z,1520696558.771 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:42:39.163Z,1520696559.163 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:42:39.568Z,1520696559.568 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:42:39.957Z,1520696559.957 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:42:40.373Z,1520696560.373 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:42:40.756Z,1520696560.756 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:42:41.158Z,1520696561.158 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:42:41.566Z,1520696561.566 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:42:41.936Z,1520696561.936 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session.
2018-03-10T15:42:41.963Z,1520696561.963 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:42:42.349Z,1520696562.349 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:42:42.760Z,1520696562.760 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:42:43.180Z,1520696563.180 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:42:43.552Z,1520696563.552 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:42:43.970Z,1520696563.970 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:42:44.364Z,1520696564.364 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:42:44.773Z,1520696564.773 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:42:45.150Z,1520696565.150 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:42:45.557Z,1520696565.557 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:42:45.954Z,1520696565.954 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:42:46.353Z,1520696566.353 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:42:46.757Z,1520696566.757 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:42:47.152Z,1520696567.152 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:42:47.561Z,1520696567.561 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:42:47.957Z,1520696567.957 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:42:48.352Z,1520696568.352 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:42:48.766Z,1520696568.766 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:42:49.170Z,1520696569.170 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:42:49.575Z,1520696569.575 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:42:49.953Z,1520696569.953 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:42:50.373Z,1520696570.373 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:42:50.778Z,1520696570.778 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:42:51.148Z,1520696571.148 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:42:51.556Z,1520696571.556 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:42:51.968Z,1520696571.968 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:42:52.348Z,1520696572.348 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:42:52.748Z,1520696572.748 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:42:53.152Z,1520696573.152 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:42:53.548Z,1520696573.548 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:42:53.948Z,1520696573.948 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:42:54.347Z,1520696574.347 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:42:54.751Z,1520696574.751 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:42:55.155Z,1520696575.155 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:42:55.554Z,1520696575.554 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:42:55.961Z,1520696575.961 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:42:56.381Z,1520696576.381 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:42:56.770Z,1520696576.770 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:42:57.154Z,1520696577.154 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:42:57.567Z,1520696577.567 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:42:57.968Z,1520696577.968 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:42:58.364Z,1520696578.364 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:42:58.761Z,1520696578.761 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:42:59.147Z,1520696579.147 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:42:59.565Z,1520696579.565 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:42:59.948Z,1520696579.948 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:43:00.348Z,1520696580.348 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:43:00.762Z,1520696580.762 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:43:01.148Z,1520696581.148 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:43:01.548Z,1520696581.548 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:43:01.952Z,1520696581.952 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:43:02.349Z,1520696582.349 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:43:02.751Z,1520696582.751 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:43:03.148Z,1520696583.148 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:43:03.548Z,1520696583.548 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:43:03.589Z,1520696583.589 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T15:43:03.589Z,1520696583.589 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 131
2018-03-10T15:43:03.589Z,1520696583.589 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-10T15:43:03.602Z,1520696583.602 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-10T15:43:03.977Z,1520696583.977 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:43:04.055Z,1520696584.055 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-10T15:43:04.055Z,1520696584.055 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 131
2018-03-10T15:43:04.354Z,1520696584.354 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:43:04.405Z,1520696584.405 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-10T15:43:04.405Z,1520696584.405 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-10T15:43:04.405Z,1520696584.405 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-10T15:43:07.584Z,1520696587.584 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:43:07.709Z,1520696587.709 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:43:08.098Z,1520696588.098 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:43:08.498Z,1520696588.498 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:43:08.901Z,1520696588.901 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:43:09.298Z,1520696589.298 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:43:09.688Z,1520696589.688 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:43:10.100Z,1520696590.100 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:43:10.489Z,1520696590.489 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:43:10.888Z,1520696590.888 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:43:11.284Z,1520696591.284 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:43:11.705Z,1520696591.705 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:43:12.084Z,1520696592.084 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:43:12.468Z,1520696592.468 [NAL9602](INFO): Powering down
2018-03-10T15:43:12.487Z,1520696592.487 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:43:12.888Z,1520696592.888 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:43:13.288Z,1520696593.288 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:43:13.693Z,1520696593.693 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:43:14.088Z,1520696594.088 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:43:14.488Z,1520696594.488 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:43:14.888Z,1520696594.888 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:43:15.296Z,1520696595.296 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:43:15.693Z,1520696595.693 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:43:16.096Z,1520696596.096 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:43:16.494Z,1520696596.494 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:43:16.893Z,1520696596.893 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:43:17.295Z,1520696597.295 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:43:17.703Z,1520696597.703 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:43:18.097Z,1520696598.097 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:43:18.493Z,1520696598.493 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:43:18.905Z,1520696598.905 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:43:19.292Z,1520696599.292 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:43:19.696Z,1520696599.696 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:43:20.092Z,1520696600.092 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:43:20.492Z,1520696600.492 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:43:20.893Z,1520696600.893 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:43:21.296Z,1520696601.296 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:43:21.692Z,1520696601.692 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:43:22.088Z,1520696602.088 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:43:22.490Z,1520696602.490 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:43:22.900Z,1520696602.900 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:43:23.302Z,1520696603.302 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:43:23.708Z,1520696603.708 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:43:24.096Z,1520696604.096 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:43:24.486Z,1520696604.486 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:43:24.908Z,1520696604.908 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:43:25.284Z,1520696605.284 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:43:25.684Z,1520696605.684 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:43:26.109Z,1520696606.109 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:43:26.484Z,1520696606.484 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:43:26.888Z,1520696606.888 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:43:27.287Z,1520696607.287 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:43:27.684Z,1520696607.684 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:43:28.088Z,1520696608.088 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:43:28.488Z,1520696608.488 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:43:28.888Z,1520696608.888 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:43:29.291Z,1520696609.291 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:43:29.688Z,1520696609.688 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:43:30.088Z,1520696610.088 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:43:30.488Z,1520696610.488 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:43:30.892Z,1520696610.892 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:43:31.284Z,1520696611.284 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:43:31.688Z,1520696611.688 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:43:32.088Z,1520696612.088 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:43:32.500Z,1520696612.500 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:43:32.894Z,1520696612.894 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:43:33.296Z,1520696613.296 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:43:33.689Z,1520696613.689 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:43:34.093Z,1520696614.093 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:43:34.493Z,1520696614.493 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:43:34.893Z,1520696614.893 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:43:35.297Z,1520696615.297 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:43:35.697Z,1520696615.697 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:43:36.097Z,1520696616.097 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:43:36.497Z,1520696616.497 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:43:36.906Z,1520696616.906 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:43:37.298Z,1520696617.298 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:43:37.684Z,1520696617.684 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:43:38.108Z,1520696618.108 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:43:38.484Z,1520696618.484 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:43:38.900Z,1520696618.900 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:43:39.284Z,1520696619.284 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:43:39.684Z,1520696619.684 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:43:40.100Z,1520696620.100 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:43:40.493Z,1520696620.493 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:43:40.884Z,1520696620.884 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:43:41.292Z,1520696621.292 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:43:41.684Z,1520696621.684 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:43:42.088Z,1520696622.088 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:43:42.488Z,1520696622.488 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:43:42.907Z,1520696622.907 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:43:43.288Z,1520696623.288 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:43:43.687Z,1520696623.687 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:43:44.088Z,1520696624.088 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:43:44.488Z,1520696624.488 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:43:44.893Z,1520696624.893 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:43:45.309Z,1520696625.309 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:43:45.692Z,1520696625.692 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:43:46.092Z,1520696626.092 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:43:46.492Z,1520696626.492 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:43:46.892Z,1520696626.892 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:43:47.293Z,1520696627.293 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:43:47.696Z,1520696627.696 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:43:48.096Z,1520696628.096 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:43:48.497Z,1520696628.497 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:43:48.895Z,1520696628.895 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:43:49.295Z,1520696629.295 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:43:49.696Z,1520696629.696 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:43:50.101Z,1520696630.101 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:43:50.497Z,1520696630.497 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:43:50.886Z,1520696630.886 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:43:51.284Z,1520696631.284 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:43:51.688Z,1520696631.688 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:43:52.101Z,1520696632.101 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:43:52.488Z,1520696632.488 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:43:52.900Z,1520696632.900 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:43:53.300Z,1520696633.300 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:43:53.687Z,1520696633.687 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:43:54.100Z,1520696634.100 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:43:54.500Z,1520696634.500 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:43:54.905Z,1520696634.905 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:43:55.288Z,1520696635.288 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:43:55.688Z,1520696635.688 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:43:56.108Z,1520696636.108 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:43:56.500Z,1520696636.500 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:43:56.889Z,1520696636.889 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:43:57.288Z,1520696637.288 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:43:57.688Z,1520696637.688 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:43:58.084Z,1520696638.084 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:43:58.487Z,1520696638.487 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:43:58.892Z,1520696638.892 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:43:59.283Z,1520696639.283 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:43:59.692Z,1520696639.692 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:44:00.088Z,1520696640.088 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:44:00.484Z,1520696640.484 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:44:00.892Z,1520696640.892 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:44:01.292Z,1520696641.292 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:44:01.689Z,1520696641.689 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:44:02.088Z,1520696642.088 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:44:02.503Z,1520696642.503 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:44:02.888Z,1520696642.888 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:44:03.293Z,1520696643.293 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:44:03.696Z,1520696643.696 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:44:04.093Z,1520696644.093 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:44:04.494Z,1520696644.494 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:44:07.643Z,1520696647.643 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:44:07.758Z,1520696647.758 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:44:08.140Z,1520696648.140 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:44:08.546Z,1520696648.546 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:44:08.940Z,1520696648.940 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:44:09.332Z,1520696649.332 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:44:09.736Z,1520696649.736 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:44:10.135Z,1520696650.135 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:44:10.541Z,1520696650.541 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:44:10.940Z,1520696650.940 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:44:11.328Z,1520696651.328 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:44:11.728Z,1520696651.728 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:44:12.140Z,1520696652.140 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:44:12.529Z,1520696652.529 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:44:12.940Z,1520696652.940 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:44:13.328Z,1520696653.328 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:44:13.724Z,1520696653.724 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:44:14.149Z,1520696654.149 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:44:14.541Z,1520696654.541 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:44:14.928Z,1520696654.928 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:44:15.349Z,1520696655.349 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:44:15.733Z,1520696655.733 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:44:16.125Z,1520696656.125 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:44:16.529Z,1520696656.529 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:44:16.929Z,1520696656.929 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:44:17.329Z,1520696657.329 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:44:17.728Z,1520696657.728 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:44:18.133Z,1520696658.133 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:44:18.534Z,1520696658.534 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:44:18.937Z,1520696658.937 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:44:19.337Z,1520696659.337 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:44:19.736Z,1520696659.736 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:44:20.137Z,1520696660.137 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:44:20.535Z,1520696660.535 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:44:20.935Z,1520696660.935 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:44:21.336Z,1520696661.336 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:44:21.736Z,1520696661.736 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:44:22.135Z,1520696662.135 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:44:22.536Z,1520696662.536 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:44:22.927Z,1520696662.927 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:44:23.340Z,1520696663.340 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:44:23.748Z,1520696663.748 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:44:24.145Z,1520696664.145 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:44:24.536Z,1520696664.536 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:44:24.937Z,1520696664.937 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:44:25.336Z,1520696665.336 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:44:25.724Z,1520696665.724 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:44:26.136Z,1520696666.136 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:44:26.524Z,1520696666.524 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:44:26.924Z,1520696666.924 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:44:27.328Z,1520696667.328 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:44:27.728Z,1520696667.728 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:44:28.128Z,1520696668.128 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:44:28.528Z,1520696668.528 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:44:28.924Z,1520696668.924 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:44:29.324Z,1520696669.324 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:44:29.729Z,1520696669.729 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:44:30.128Z,1520696670.128 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:44:30.528Z,1520696670.528 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:44:30.928Z,1520696670.928 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:44:31.340Z,1520696671.340 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:44:31.724Z,1520696671.724 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:44:32.132Z,1520696672.132 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:44:32.532Z,1520696672.532 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:44:32.928Z,1520696672.928 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:44:33.343Z,1520696673.343 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:44:33.732Z,1520696673.732 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:44:34.128Z,1520696674.128 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:44:34.532Z,1520696674.532 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:44:34.924Z,1520696674.924 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:44:35.324Z,1520696675.324 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:44:35.728Z,1520696675.728 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:44:36.132Z,1520696676.132 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:44:36.528Z,1520696676.528 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:44:36.928Z,1520696676.928 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:44:37.328Z,1520696677.328 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:44:37.736Z,1520696677.736 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:44:38.140Z,1520696678.140 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:44:38.536Z,1520696678.536 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:44:38.936Z,1520696678.936 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:44:39.336Z,1520696679.336 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:44:39.737Z,1520696679.737 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:44:40.138Z,1520696680.138 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:44:40.543Z,1520696680.543 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:44:40.932Z,1520696680.932 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:44:41.346Z,1520696681.346 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:44:41.748Z,1520696681.748 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:44:42.137Z,1520696682.137 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:44:42.539Z,1520696682.539 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:44:42.935Z,1520696682.935 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:44:43.323Z,1520696683.323 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:44:43.732Z,1520696683.732 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:44:44.145Z,1520696684.145 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:44:44.528Z,1520696684.528 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:44:44.940Z,1520696684.940 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:44:45.328Z,1520696685.328 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:44:45.728Z,1520696685.728 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:44:46.129Z,1520696686.129 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:44:46.540Z,1520696686.540 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:44:46.928Z,1520696686.928 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:44:47.348Z,1520696687.348 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:44:47.728Z,1520696687.728 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:44:48.128Z,1520696688.128 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:44:48.528Z,1520696688.528 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:44:48.932Z,1520696688.932 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:44:49.333Z,1520696689.333 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:44:49.730Z,1520696689.730 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:44:50.134Z,1520696690.134 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:44:50.529Z,1520696690.529 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:44:50.937Z,1520696690.937 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:44:51.337Z,1520696691.337 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:44:51.738Z,1520696691.738 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:44:52.138Z,1520696692.138 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:44:52.541Z,1520696692.541 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:44:52.938Z,1520696692.938 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:44:53.346Z,1520696693.346 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:44:53.738Z,1520696693.738 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:44:54.125Z,1520696694.125 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:44:54.532Z,1520696694.532 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:44:54.928Z,1520696694.928 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:44:55.332Z,1520696695.332 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:44:55.730Z,1520696695.730 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:44:56.131Z,1520696696.131 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:44:56.537Z,1520696696.537 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:44:56.937Z,1520696696.937 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:44:57.337Z,1520696697.337 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:44:57.734Z,1520696697.734 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:44:58.137Z,1520696698.137 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:44:58.534Z,1520696698.534 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:44:58.935Z,1520696698.935 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:44:59.335Z,1520696699.335 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:44:59.736Z,1520696699.736 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:45:00.136Z,1520696700.136 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:45:00.537Z,1520696700.537 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:45:00.938Z,1520696700.938 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:45:01.345Z,1520696701.345 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:45:01.740Z,1520696701.740 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:45:02.145Z,1520696702.145 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:45:02.536Z,1520696702.536 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:45:02.922Z,1520696702.922 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:45:03.340Z,1520696703.340 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:45:03.724Z,1520696703.724 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:45:04.123Z,1520696704.123 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:45:04.532Z,1520696704.532 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:45:07.841Z,1520696707.841 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:45:07.964Z,1520696707.964 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:45:08.338Z,1520696708.338 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:45:08.720Z,1520696708.720 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:45:09.122Z,1520696709.122 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:45:09.513Z,1520696709.513 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:45:09.921Z,1520696709.921 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:45:10.331Z,1520696710.331 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:45:10.704Z,1520696710.704 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:45:11.100Z,1520696711.100 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:45:11.510Z,1520696711.510 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:45:11.914Z,1520696711.914 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:45:12.342Z,1520696712.342 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:45:12.736Z,1520696712.736 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:45:13.126Z,1520696713.126 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:45:13.519Z,1520696713.519 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:45:13.926Z,1520696713.926 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:45:14.343Z,1520696714.343 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:45:14.715Z,1520696714.715 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:45:15.132Z,1520696715.132 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:45:15.511Z,1520696715.511 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:45:15.928Z,1520696715.928 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:45:16.302Z,1520696716.302 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:45:16.726Z,1520696716.726 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:45:17.104Z,1520696717.104 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:45:17.499Z,1520696717.499 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:45:17.904Z,1520696717.904 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:45:18.300Z,1520696718.300 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:45:18.705Z,1520696718.705 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:45:19.111Z,1520696719.111 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:45:19.511Z,1520696719.511 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:45:19.914Z,1520696719.914 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:45:20.337Z,1520696720.337 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:45:20.745Z,1520696720.745 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:45:21.105Z,1520696721.105 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:45:21.528Z,1520696721.528 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:45:21.909Z,1520696721.909 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:45:22.340Z,1520696722.340 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:45:22.721Z,1520696722.721 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:45:23.100Z,1520696723.100 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:45:23.527Z,1520696723.527 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:45:23.904Z,1520696723.904 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:45:24.304Z,1520696724.304 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:45:24.702Z,1520696724.702 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:45:25.104Z,1520696725.104 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:45:25.500Z,1520696725.500 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:45:25.904Z,1520696725.904 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:45:26.311Z,1520696726.311 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:45:26.714Z,1520696726.714 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:45:27.145Z,1520696727.145 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:45:27.522Z,1520696727.522 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:45:27.920Z,1520696727.920 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:45:28.324Z,1520696728.324 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:45:28.739Z,1520696728.739 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:45:29.145Z,1520696729.145 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:45:29.526Z,1520696729.526 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:45:29.937Z,1520696729.937 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:45:30.320Z,1520696730.320 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:45:30.719Z,1520696730.719 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:45:31.116Z,1520696731.116 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:45:31.518Z,1520696731.518 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:45:31.918Z,1520696731.918 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:45:32.314Z,1520696732.314 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:45:32.711Z,1520696732.711 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:45:33.114Z,1520696733.114 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:45:33.512Z,1520696733.512 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:45:33.938Z,1520696733.938 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:45:34.300Z,1520696734.300 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:45:34.728Z,1520696734.728 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:45:35.101Z,1520696735.101 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:45:35.500Z,1520696735.500 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:45:35.931Z,1520696735.931 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:45:36.309Z,1520696736.309 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:45:36.720Z,1520696736.720 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:45:37.133Z,1520696737.133 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:45:37.526Z,1520696737.526 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:45:37.927Z,1520696737.927 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:45:38.304Z,1520696738.304 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:45:38.725Z,1520696738.725 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:45:39.100Z,1520696739.100 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:45:39.505Z,1520696739.505 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:45:39.904Z,1520696739.904 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:45:40.304Z,1520696740.304 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:45:40.705Z,1520696740.705 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:45:40.778Z,1520696740.778 [CBIT](DEBUG): EFC running - data check-sum false
2018-03-10T15:45:41.145Z,1520696741.145 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:45:41.552Z,1520696741.552 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:45:41.926Z,1520696741.926 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:45:42.347Z,1520696742.347 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:45:42.708Z,1520696742.708 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:45:43.133Z,1520696743.133 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:45:43.513Z,1520696743.513 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:45:43.927Z,1520696743.927 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:45:44.332Z,1520696744.332 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:45:44.719Z,1520696744.719 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:45:45.117Z,1520696745.117 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:45:45.521Z,1520696745.521 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:45:45.918Z,1520696745.918 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:45:46.326Z,1520696746.326 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:45:46.724Z,1520696746.724 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:45:47.105Z,1520696747.105 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:45:47.500Z,1520696747.500 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:45:47.910Z,1520696747.910 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:45:48.305Z,1520696748.305 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:45:48.720Z,1520696748.720 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:45:49.120Z,1520696749.120 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:45:49.531Z,1520696749.531 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:45:49.948Z,1520696749.948 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:45:50.328Z,1520696750.328 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:45:50.717Z,1520696750.717 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:45:51.132Z,1520696751.132 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:45:51.545Z,1520696751.545 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:45:51.918Z,1520696751.918 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:45:52.324Z,1520696752.324 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:45:52.721Z,1520696752.721 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:45:53.105Z,1520696753.105 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:45:53.528Z,1520696753.528 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:45:53.904Z,1520696753.904 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:45:54.300Z,1520696754.300 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:45:54.704Z,1520696754.704 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:45:55.104Z,1520696755.104 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:45:55.551Z,1520696755.551 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:45:55.928Z,1520696755.928 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:45:56.314Z,1520696756.314 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:45:56.735Z,1520696756.735 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:45:57.142Z,1520696757.142 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:45:57.542Z,1520696757.542 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:45:57.913Z,1520696757.913 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:45:58.305Z,1520696758.305 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:45:58.741Z,1520696758.741 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:45:59.118Z,1520696759.118 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:45:59.517Z,1520696759.517 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:45:59.915Z,1520696759.915 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:46:00.325Z,1520696760.325 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:46:00.700Z,1520696760.700 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:46:01.100Z,1520696761.100 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:46:01.500Z,1520696761.500 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:46:01.915Z,1520696761.915 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:46:02.309Z,1520696762.309 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:46:02.700Z,1520696762.700 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:46:03.104Z,1520696763.104 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:46:03.519Z,1520696763.519 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:46:03.905Z,1520696763.905 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:46:04.304Z,1520696764.304 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:46:04.713Z,1520696764.713 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:46:04.753Z,1520696764.753 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T15:46:04.753Z,1520696764.753 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 132
2018-03-10T15:46:04.753Z,1520696764.753 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-10T15:46:04.770Z,1520696764.770 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-10T15:46:07.919Z,1520696767.919 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:46:07.966Z,1520696767.966 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-10T15:46:07.967Z,1520696767.967 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 132
2018-03-10T15:46:08.052Z,1520696768.052 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:46:08.100Z,1520696768.100 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-10T15:46:08.100Z,1520696768.100 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-10T15:46:08.100Z,1520696768.100 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-10T15:46:08.411Z,1520696768.411 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:46:08.809Z,1520696768.809 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:46:09.210Z,1520696769.210 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:46:09.608Z,1520696769.608 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:46:10.008Z,1520696770.008 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:46:10.407Z,1520696770.407 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:46:10.807Z,1520696770.807 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:46:11.207Z,1520696771.207 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:46:11.603Z,1520696771.603 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:46:12.010Z,1520696772.010 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:46:12.411Z,1520696772.411 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:46:12.805Z,1520696772.805 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:46:13.212Z,1520696773.212 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:46:13.606Z,1520696773.606 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:46:14.009Z,1520696774.009 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:46:14.412Z,1520696774.412 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:46:14.800Z,1520696774.800 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:46:15.210Z,1520696775.210 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:46:15.611Z,1520696775.611 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:46:16.013Z,1520696776.013 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:46:16.412Z,1520696776.412 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:46:16.810Z,1520696776.810 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:46:17.212Z,1520696777.212 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:46:17.607Z,1520696777.607 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:46:18.020Z,1520696778.020 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:46:18.413Z,1520696778.413 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:46:18.809Z,1520696778.809 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:46:19.204Z,1520696779.204 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:46:19.226Z,1520696779.226 [BPC1](ERROR): Failed to receive battery data
2018-03-10T15:46:19.226Z,1520696779.226 [BPC1] Communications Fault, FailCount= 1
2018-03-10T15:46:19.226Z,1520696779.226 [BPC1](ERROR): Communications Fault
2018-03-10T15:46:19.249Z,1520696779.249 [CBIT](ERROR): Communications Fault in component: BPC1
2018-03-10T15:46:19.597Z,1520696779.597 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:46:20.000Z,1520696780.000 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:46:20.404Z,1520696780.404 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:46:20.444Z,1520696780.444 [CBIT](INFO): Clearing failed state for component BPC1
2018-03-10T15:46:20.444Z,1520696780.444 [BPC1] No Fault, FailCount= 1
2018-03-10T15:46:20.800Z,1520696780.800 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:46:21.206Z,1520696781.206 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:46:21.617Z,1520696781.617 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:46:22.004Z,1520696782.004 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:46:22.398Z,1520696782.398 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:46:22.799Z,1520696782.799 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:46:23.220Z,1520696783.220 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:46:23.597Z,1520696783.597 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:46:24.000Z,1520696784.000 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:46:24.414Z,1520696784.414 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:46:24.800Z,1520696784.800 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:46:25.200Z,1520696785.200 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:46:25.603Z,1520696785.603 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:46:26.007Z,1520696786.007 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:46:26.406Z,1520696786.406 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:46:26.805Z,1520696786.805 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:46:27.207Z,1520696787.207 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:46:27.610Z,1520696787.610 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:46:28.008Z,1520696788.008 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:46:28.406Z,1520696788.406 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:46:28.808Z,1520696788.808 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:46:29.212Z,1520696789.212 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:46:29.607Z,1520696789.607 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:46:30.008Z,1520696790.008 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:46:30.408Z,1520696790.408 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:46:30.812Z,1520696790.812 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:46:31.213Z,1520696791.213 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:46:31.613Z,1520696791.613 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:46:32.008Z,1520696792.008 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:46:32.406Z,1520696792.406 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:46:32.814Z,1520696792.814 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:46:33.208Z,1520696793.208 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:46:33.607Z,1520696793.607 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:46:34.008Z,1520696794.008 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:46:34.411Z,1520696794.411 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:46:34.809Z,1520696794.809 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:46:35.214Z,1520696795.214 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:46:35.608Z,1520696795.608 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:46:36.013Z,1520696796.013 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:46:36.408Z,1520696796.408 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:46:36.804Z,1520696796.804 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:46:37.210Z,1520696797.210 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:46:37.610Z,1520696797.610 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:46:38.010Z,1520696798.010 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:46:38.408Z,1520696798.408 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:46:38.804Z,1520696798.804 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:46:39.208Z,1520696799.208 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:46:39.610Z,1520696799.610 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:46:39.998Z,1520696799.998 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:46:40.416Z,1520696800.416 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:46:40.802Z,1520696800.802 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:46:41.204Z,1520696801.204 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:46:41.600Z,1520696801.600 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:46:42.002Z,1520696802.002 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:46:42.402Z,1520696802.402 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:46:42.801Z,1520696802.801 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:46:43.200Z,1520696803.200 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:46:43.602Z,1520696803.602 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:46:43.999Z,1520696803.999 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:46:44.400Z,1520696804.400 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:46:44.797Z,1520696804.797 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:46:45.199Z,1520696805.199 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:46:45.602Z,1520696805.602 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:46:46.004Z,1520696806.004 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:46:46.404Z,1520696806.404 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:46:46.802Z,1520696806.802 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:46:47.205Z,1520696807.205 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:46:47.605Z,1520696807.605 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:46:48.000Z,1520696808.000 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:46:48.399Z,1520696808.399 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:46:48.799Z,1520696808.799 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:46:49.200Z,1520696809.200 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:46:49.597Z,1520696809.597 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:46:50.002Z,1520696810.002 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:46:50.408Z,1520696810.408 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:46:50.802Z,1520696810.802 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:46:51.208Z,1520696811.208 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:46:51.217Z,1520696811.217 [BPC1](FAULT): Failed to initialize
2018-03-10T15:46:51.217Z,1520696811.217 [BPC1] Communications Fault, FailCount= 2
2018-03-10T15:46:51.217Z,1520696811.217 [BPC1](ERROR): Communications Fault
2018-03-10T15:46:51.275Z,1520696811.275 [CBIT](ERROR): Communications Fault in component: BPC1
2018-03-10T15:46:51.607Z,1520696811.607 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:46:52.009Z,1520696812.009 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:46:52.408Z,1520696812.408 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:46:52.455Z,1520696812.455 [CBIT](INFO): Clearing failed state for component BPC1
2018-03-10T15:46:52.455Z,1520696812.455 [BPC1] No Fault, FailCount= 2
2018-03-10T15:46:52.804Z,1520696812.804 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:46:53.215Z,1520696813.215 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:46:53.607Z,1520696813.607 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:46:54.008Z,1520696814.008 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:46:54.406Z,1520696814.406 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:46:54.799Z,1520696814.799 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:46:55.202Z,1520696815.202 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:46:55.597Z,1520696815.597 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:46:56.020Z,1520696816.020 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:46:56.422Z,1520696816.422 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:46:56.796Z,1520696816.796 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:46:57.217Z,1520696817.217 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:46:57.600Z,1520696817.600 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:46:58.014Z,1520696818.014 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:46:58.413Z,1520696818.413 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:46:58.800Z,1520696818.800 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:46:59.201Z,1520696819.201 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:46:59.614Z,1520696819.614 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:47:00.002Z,1520696820.002 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:47:00.397Z,1520696820.397 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:47:00.800Z,1520696820.800 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:47:01.197Z,1520696821.197 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:47:01.602Z,1520696821.602 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:47:02.004Z,1520696822.004 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:47:02.400Z,1520696822.400 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:47:02.799Z,1520696822.799 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:47:03.202Z,1520696823.202 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:47:03.600Z,1520696823.600 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:47:04.005Z,1520696824.005 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:47:04.049Z,1520696824.049 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-03-10T15:47:04.049Z,1520696824.049 [Default:CheckIn:C.Wait] Stopped
2018-03-10T15:47:04.049Z,1520696824.049 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-03-10T15:47:04.049Z,1520696824.049 [Default:CheckIn:D] Running Loop=1
2018-03-10T15:47:04.403Z,1520696824.403 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:47:04.446Z,1520696824.446 [Default:CheckIn:D] Stopped
2018-03-10T15:47:04.446Z,1520696824.446 [Default:CheckIn:E] Running Loop=1
2018-03-10T15:47:04.805Z,1520696824.805 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:47:04.842Z,1520696824.842 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 627.775391 min 
2018-03-10T15:47:04.842Z,1520696824.842 [Default:CheckIn:E] Stopped
2018-03-10T15:47:04.847Z,1520696824.847 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-03-10T15:47:04.847Z,1520696824.847 [Default:CheckIn] Stopped
2018-03-10T15:47:04.847Z,1520696824.847 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-03-10T15:47:04.847Z,1520696824.847 [Default:CheckIn](INFO): Running loop #62
2018-03-10T15:47:04.847Z,1520696824.847 [Default:CheckIn] Running Loop=62
2018-03-10T15:47:04.847Z,1520696824.847 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-03-10T15:47:04.847Z,1520696824.847 [Default:CheckIn:Read_GPS] Running Loop=1
2018-03-10T15:47:08.031Z,1520696828.031 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:47:08.122Z,1520696828.122 [NAL9602](INFO): Powering up
2018-03-10T15:47:08.140Z,1520696828.140 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:47:08.508Z,1520696828.508 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:47:08.898Z,1520696828.898 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:47:09.316Z,1520696829.316 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:47:09.705Z,1520696829.705 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:47:10.103Z,1520696830.103 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:47:10.502Z,1520696830.502 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:47:10.901Z,1520696830.901 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:47:11.301Z,1520696831.301 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:47:11.705Z,1520696831.705 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:47:12.105Z,1520696832.105 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:47:12.501Z,1520696832.501 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:47:12.908Z,1520696832.908 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:47:13.308Z,1520696833.308 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:47:13.701Z,1520696833.701 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:47:14.108Z,1520696834.108 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:47:14.504Z,1520696834.504 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:47:14.904Z,1520696834.904 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:47:15.303Z,1520696835.303 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:47:15.713Z,1520696835.713 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:47:16.105Z,1520696836.105 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:47:16.500Z,1520696836.500 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:47:16.904Z,1520696836.904 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:47:17.308Z,1520696837.308 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:47:17.708Z,1520696837.708 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:47:18.105Z,1520696838.105 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:47:18.500Z,1520696838.500 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:47:18.915Z,1520696838.915 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:47:19.280Z,1520696839.280 [NAL9602](INFO): NAL9602 initialized
2018-03-10T15:47:19.307Z,1520696839.307 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:47:19.692Z,1520696839.692 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:47:20.120Z,1520696840.120 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:47:20.518Z,1520696840.518 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:47:20.919Z,1520696840.919 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:47:21.297Z,1520696841.297 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:47:21.701Z,1520696841.701 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:47:22.097Z,1520696842.097 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:47:22.497Z,1520696842.497 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:47:22.897Z,1520696842.897 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:47:22.918Z,1520696842.918 [BPC1](FAULT): Failed to initialize
2018-03-10T15:47:22.918Z,1520696842.918 [BPC1] Communications Fault, FailCount= 3
2018-03-10T15:47:22.918Z,1520696842.918 [BPC1](ERROR): Communications Fault
2018-03-10T15:47:22.941Z,1520696842.941 [CBIT](ERROR): Communications Fault in component: BPC1
2018-03-10T15:47:23.296Z,1520696843.296 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:47:23.695Z,1520696843.695 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:47:24.097Z,1520696844.097 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:47:24.165Z,1520696844.165 [CBIT](INFO): Clearing failed state for component BPC1
2018-03-10T15:47:24.165Z,1520696844.165 [BPC1] No Fault, FailCount= 3
2018-03-10T15:47:24.497Z,1520696844.497 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:47:24.898Z,1520696844.898 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:47:25.302Z,1520696845.302 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:47:25.705Z,1520696845.705 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:47:26.101Z,1520696846.101 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:47:26.502Z,1520696846.502 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:47:26.904Z,1520696846.904 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:47:27.305Z,1520696847.305 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:47:27.705Z,1520696847.705 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:47:28.103Z,1520696848.103 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:47:28.499Z,1520696848.499 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:47:28.903Z,1520696848.903 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:47:29.304Z,1520696849.304 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:47:29.704Z,1520696849.704 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:47:30.106Z,1520696850.106 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:47:30.504Z,1520696850.504 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:47:30.903Z,1520696850.903 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:47:31.310Z,1520696851.310 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:47:31.704Z,1520696851.704 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:47:32.109Z,1520696852.109 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:47:32.504Z,1520696852.504 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:47:32.904Z,1520696852.904 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:47:33.299Z,1520696853.299 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:47:33.713Z,1520696853.713 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:47:34.116Z,1520696854.116 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:47:34.494Z,1520696854.494 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:47:34.896Z,1520696854.896 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:47:35.296Z,1520696855.296 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:47:35.694Z,1520696855.694 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:47:36.116Z,1520696856.116 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:47:36.496Z,1520696856.496 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:47:36.894Z,1520696856.894 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:47:37.300Z,1520696857.300 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:47:37.692Z,1520696857.692 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:47:38.094Z,1520696858.094 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:47:38.496Z,1520696858.496 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:47:38.900Z,1520696858.900 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:47:39.301Z,1520696859.301 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:47:39.704Z,1520696859.704 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:47:40.105Z,1520696860.105 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:47:40.502Z,1520696860.502 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:47:40.908Z,1520696860.908 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:47:41.304Z,1520696861.304 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:47:41.703Z,1520696861.703 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:47:42.102Z,1520696862.102 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:47:42.501Z,1520696862.501 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:47:42.903Z,1520696862.903 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:47:43.304Z,1520696863.304 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:47:43.704Z,1520696863.704 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:47:44.104Z,1520696864.104 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:47:44.504Z,1520696864.504 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:47:44.905Z,1520696864.905 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:47:45.304Z,1520696865.304 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:47:45.703Z,1520696865.703 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:47:46.104Z,1520696866.104 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:47:46.506Z,1520696866.506 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:47:46.914Z,1520696866.914 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:47:47.313Z,1520696867.313 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:47:47.712Z,1520696867.712 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:47:48.104Z,1520696868.104 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:47:48.515Z,1520696868.515 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:47:48.916Z,1520696868.916 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:47:49.299Z,1520696869.299 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:47:49.696Z,1520696869.696 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:47:50.093Z,1520696870.093 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:47:50.518Z,1520696870.518 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:47:50.897Z,1520696870.897 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:47:51.276Z,1520696871.276 [NAL9602](ERROR): Failed to receive proper response when querying signal strength for MT queue check.
2018-03-10T15:47:51.351Z,1520696871.351 [NAL9602](FAULT): received: 
+CSQ:0

OK35, 0, 0, 0, 0

OK
2018-03-10T15:47:51.351Z,1520696871.351 [NAL9602] Data Fault, FailCount= 4
2018-03-10T15:47:51.351Z,1520696871.351 [NAL9602](ERROR): Data Fault
2018-03-10T15:47:51.378Z,1520696871.378 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:47:51.456Z,1520696871.456 [CBIT](ERROR): Data Fault in component: NAL9602
2018-03-10T15:47:51.680Z,1520696871.680 [NAL9602](INFO): Powering down
2018-03-10T15:47:51.700Z,1520696871.700 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:47:52.103Z,1520696872.103 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:47:52.501Z,1520696872.501 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:47:52.532Z,1520696872.532 [CBIT](INFO): Clearing failed state for component NAL9602
2018-03-10T15:47:52.532Z,1520696872.532 [NAL9602] No Fault, FailCount= 4
2018-03-10T15:47:52.905Z,1520696872.905 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:47:53.304Z,1520696873.304 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:47:53.700Z,1520696873.700 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:47:54.102Z,1520696874.102 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:47:54.507Z,1520696874.507 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:47:54.901Z,1520696874.901 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:47:54.910Z,1520696874.910 [BPC1](FAULT): Failed to initialize
2018-03-10T15:47:54.910Z,1520696874.910 [BPC1] Communications Fault, FailCount= 4
2018-03-10T15:47:54.910Z,1520696874.910 [BPC1](ERROR): Communications Fault
2018-03-10T15:47:54.933Z,1520696874.933 [CBIT](ERROR): Communications Fault in component: BPC1
2018-03-10T15:47:55.304Z,1520696875.304 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:47:55.709Z,1520696875.709 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:47:56.108Z,1520696876.108 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:47:56.138Z,1520696876.138 [CBIT](INFO): Clearing failed state for component BPC1
2018-03-10T15:47:56.138Z,1520696876.138 [BPC1] No Fault, FailCount= 4
2018-03-10T15:47:56.505Z,1520696876.505 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:47:56.900Z,1520696876.900 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:47:57.300Z,1520696877.300 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:47:57.698Z,1520696877.698 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:47:58.109Z,1520696878.109 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:47:58.494Z,1520696878.494 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:47:58.907Z,1520696878.907 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:47:59.293Z,1520696879.293 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:47:59.697Z,1520696879.697 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:48:00.118Z,1520696880.118 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:48:00.510Z,1520696880.510 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:48:00.894Z,1520696880.894 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:48:01.300Z,1520696881.300 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:48:01.699Z,1520696881.699 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:48:02.101Z,1520696882.101 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:48:02.498Z,1520696882.498 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:48:02.892Z,1520696882.892 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:48:03.301Z,1520696883.301 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:48:03.696Z,1520696883.696 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:48:04.092Z,1520696884.092 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:48:04.494Z,1520696884.494 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:48:04.896Z,1520696884.896 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:48:08.547Z,1520696888.547 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:48:08.660Z,1520696888.660 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:48:09.057Z,1520696889.057 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:48:09.449Z,1520696889.449 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:48:09.901Z,1520696889.901 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:48:10.258Z,1520696890.258 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:48:10.658Z,1520696890.658 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:48:11.060Z,1520696891.060 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:48:11.454Z,1520696891.454 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:48:11.846Z,1520696891.846 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:48:12.261Z,1520696892.261 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:48:12.656Z,1520696892.656 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:48:13.049Z,1520696893.049 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:48:13.461Z,1520696893.461 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:48:13.848Z,1520696893.848 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:48:14.258Z,1520696894.258 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:48:14.658Z,1520696894.658 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:48:15.058Z,1520696895.058 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:48:15.453Z,1520696895.453 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:48:15.849Z,1520696895.849 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:48:16.256Z,1520696896.256 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:48:16.659Z,1520696896.659 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:48:17.053Z,1520696897.053 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:48:17.462Z,1520696897.462 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:48:17.856Z,1520696897.856 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:48:18.244Z,1520696898.244 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:48:18.652Z,1520696898.652 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:48:19.048Z,1520696899.048 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:48:19.465Z,1520696899.465 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:48:19.857Z,1520696899.857 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:48:20.259Z,1520696900.259 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:48:20.652Z,1520696900.652 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:48:21.054Z,1520696901.054 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:48:21.456Z,1520696901.456 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:48:21.832Z,1520696901.832 [NAL9602](INFO): Powering up NAL9602
2018-03-10T15:48:21.849Z,1520696901.849 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:48:22.248Z,1520696902.248 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:48:22.648Z,1520696902.648 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:48:23.048Z,1520696903.048 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:48:23.452Z,1520696903.452 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:48:23.853Z,1520696903.853 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:48:24.256Z,1520696904.256 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:48:24.656Z,1520696904.656 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:48:25.056Z,1520696905.056 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:48:25.452Z,1520696905.452 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:48:25.854Z,1520696905.854 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:48:26.260Z,1520696906.260 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:48:26.657Z,1520696906.657 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:48:27.068Z,1520696907.068 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:48:27.444Z,1520696907.444 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:48:27.844Z,1520696907.844 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:48:28.248Z,1520696908.248 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:48:28.648Z,1520696908.648 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:48:29.045Z,1520696909.045 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:48:29.460Z,1520696909.460 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:48:29.853Z,1520696909.853 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:48:30.256Z,1520696910.256 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:48:30.653Z,1520696910.653 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:48:31.055Z,1520696911.055 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:48:31.452Z,1520696911.452 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:48:31.856Z,1520696911.856 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:48:32.256Z,1520696912.256 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:48:32.662Z,1520696912.662 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:48:33.032Z,1520696913.032 [NAL9602](INFO): NAL9602 initialized
2018-03-10T15:48:33.058Z,1520696913.058 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:48:33.455Z,1520696913.455 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:48:33.840Z,1520696913.840 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-03-10T15:48:33.840Z,1520696913.840 [NAL9602] Data Fault, FailCount= 5
2018-03-10T15:48:33.840Z,1520696913.840 [NAL9602](ERROR): Data Fault
2018-03-10T15:48:33.874Z,1520696913.874 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:48:33.936Z,1520696913.936 [CBIT](ERROR): Data Fault in component: NAL9602
2018-03-10T15:48:33.937Z,1520696913.937 [CBIT](CRITICAL): Data Fault in component: NAL9602
2018-03-10T15:48:34.232Z,1520696914.232 [NAL9602](INFO): Powering down
2018-03-10T15:48:34.250Z,1520696914.250 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:48:34.341Z,1520696914.341 [CBIT](INFO): Critical error at 20180310T154833
2018-03-10T15:48:34.648Z,1520696914.648 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:48:35.048Z,1520696915.048 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:48:35.460Z,1520696915.460 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:48:35.857Z,1520696915.857 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:48:36.251Z,1520696916.251 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:48:36.660Z,1520696916.660 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:48:37.051Z,1520696917.051 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:48:37.451Z,1520696917.451 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:48:37.851Z,1520696917.851 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:48:38.244Z,1520696918.244 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:48:38.646Z,1520696918.646 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:48:39.056Z,1520696919.056 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:48:39.456Z,1520696919.456 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:48:39.846Z,1520696919.846 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:48:40.268Z,1520696920.268 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:48:40.644Z,1520696920.644 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:48:41.048Z,1520696921.048 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:48:41.468Z,1520696921.468 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:48:41.848Z,1520696921.848 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:48:42.252Z,1520696922.252 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:48:42.661Z,1520696922.661 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:48:43.060Z,1520696923.060 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:48:43.454Z,1520696923.454 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:48:43.864Z,1520696923.864 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:48:44.256Z,1520696924.256 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:48:44.653Z,1520696924.653 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:48:45.056Z,1520696925.056 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:48:45.457Z,1520696925.457 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:48:45.856Z,1520696925.856 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:48:46.256Z,1520696926.256 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:48:46.657Z,1520696926.657 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:48:47.052Z,1520696927.052 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:48:47.461Z,1520696927.461 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:48:47.856Z,1520696927.856 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:48:48.257Z,1520696928.257 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:48:48.651Z,1520696928.651 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:48:49.044Z,1520696929.044 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:48:49.444Z,1520696929.444 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:48:49.870Z,1520696929.870 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:48:50.244Z,1520696930.244 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:48:50.648Z,1520696930.648 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:48:51.052Z,1520696931.052 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:48:51.456Z,1520696931.456 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:48:51.858Z,1520696931.858 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:48:52.254Z,1520696932.254 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:48:52.652Z,1520696932.652 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:48:53.056Z,1520696933.056 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:48:53.454Z,1520696933.454 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:48:53.861Z,1520696933.861 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:48:54.252Z,1520696934.252 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:48:54.651Z,1520696934.651 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:48:55.069Z,1520696935.069 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:48:55.460Z,1520696935.460 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:48:55.868Z,1520696935.868 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:48:56.257Z,1520696936.257 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:48:56.653Z,1520696936.653 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:48:57.057Z,1520696937.057 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:48:57.452Z,1520696937.452 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:48:57.862Z,1520696937.862 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:48:58.256Z,1520696938.256 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:48:58.644Z,1520696938.644 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:48:59.060Z,1520696939.060 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:48:59.451Z,1520696939.451 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:48:59.845Z,1520696939.845 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:49:00.244Z,1520696940.244 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:49:00.655Z,1520696940.655 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:49:01.048Z,1520696941.048 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:49:01.444Z,1520696941.444 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:49:01.848Z,1520696941.848 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:49:02.248Z,1520696942.248 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:49:02.644Z,1520696942.644 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:49:03.052Z,1520696943.052 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:49:03.456Z,1520696943.456 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:49:03.852Z,1520696943.852 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:49:04.255Z,1520696944.255 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:49:04.660Z,1520696944.660 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:49:05.044Z,1520696945.044 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:49:08.279Z,1520696948.279 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:49:08.351Z,1520696948.351 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T15:49:08.351Z,1520696948.351 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 133
2018-03-10T15:49:08.351Z,1520696948.351 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-10T15:49:08.368Z,1520696948.368 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-10T15:49:08.453Z,1520696948.453 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:49:08.535Z,1520696948.535 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-10T15:49:08.535Z,1520696948.535 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 133
2018-03-10T15:49:08.836Z,1520696948.836 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:49:08.854Z,1520696948.854 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-10T15:49:08.854Z,1520696948.854 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-10T15:49:08.854Z,1520696948.854 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-10T15:49:09.232Z,1520696949.232 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:49:09.624Z,1520696949.624 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:49:10.012Z,1520696950.012 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:49:10.412Z,1520696950.412 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:49:10.814Z,1520696950.814 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:49:11.213Z,1520696951.213 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:49:11.613Z,1520696951.613 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:49:12.017Z,1520696952.017 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:49:12.417Z,1520696952.417 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:49:12.821Z,1520696952.821 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:49:13.220Z,1520696953.220 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:49:13.618Z,1520696953.618 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:49:14.019Z,1520696954.019 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:49:14.418Z,1520696954.418 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:49:14.817Z,1520696954.817 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:49:15.219Z,1520696955.219 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:49:15.620Z,1520696955.620 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:49:16.018Z,1520696956.018 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:49:16.419Z,1520696956.419 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:49:16.819Z,1520696956.819 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:49:17.218Z,1520696957.218 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:49:17.620Z,1520696957.620 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:49:18.020Z,1520696958.020 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:49:18.419Z,1520696958.419 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:49:18.817Z,1520696958.817 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:49:19.223Z,1520696959.223 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:49:19.620Z,1520696959.620 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:49:20.020Z,1520696960.020 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:49:20.421Z,1520696960.421 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:49:20.820Z,1520696960.820 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:49:21.223Z,1520696961.223 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:49:21.619Z,1520696961.619 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:49:22.029Z,1520696962.029 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:49:22.419Z,1520696962.419 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:49:22.831Z,1520696962.831 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:49:23.223Z,1520696963.223 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:49:23.623Z,1520696963.623 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:49:24.012Z,1520696964.012 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:49:24.416Z,1520696964.416 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:49:24.817Z,1520696964.817 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:49:25.213Z,1520696965.213 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:49:25.612Z,1520696965.612 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:49:26.016Z,1520696966.016 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:49:26.412Z,1520696966.412 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:49:26.833Z,1520696966.833 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:49:27.212Z,1520696967.212 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:49:27.613Z,1520696967.613 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:49:28.012Z,1520696968.012 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:49:28.424Z,1520696968.424 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:49:28.812Z,1520696968.812 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:49:29.212Z,1520696969.212 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:49:29.612Z,1520696969.612 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:49:30.020Z,1520696970.020 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:49:30.424Z,1520696970.424 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:49:30.816Z,1520696970.816 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:49:31.217Z,1520696971.217 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:49:31.617Z,1520696971.617 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:49:32.022Z,1520696972.022 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:49:32.423Z,1520696972.423 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:49:32.819Z,1520696972.819 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:49:33.221Z,1520696973.221 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:49:33.619Z,1520696973.619 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:49:34.018Z,1520696974.018 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:49:34.423Z,1520696974.423 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:49:34.830Z,1520696974.830 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:49:35.228Z,1520696975.228 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:49:35.623Z,1520696975.623 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:49:36.024Z,1520696976.024 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:49:36.421Z,1520696976.421 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:49:36.819Z,1520696976.819 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:49:37.225Z,1520696977.225 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:49:37.618Z,1520696977.618 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:49:38.021Z,1520696978.021 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:49:38.428Z,1520696978.428 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:49:38.818Z,1520696978.818 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:49:39.220Z,1520696979.220 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:49:39.613Z,1520696979.613 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:49:40.028Z,1520696980.028 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:49:40.432Z,1520696980.432 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:49:40.813Z,1520696980.813 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:49:41.234Z,1520696981.234 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:49:41.616Z,1520696981.616 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:49:42.017Z,1520696982.017 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:49:42.412Z,1520696982.412 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:49:42.813Z,1520696982.813 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:49:43.220Z,1520696983.220 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:49:43.620Z,1520696983.620 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:49:44.017Z,1520696984.017 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:49:44.417Z,1520696984.417 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:49:44.820Z,1520696984.820 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:49:45.220Z,1520696985.220 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:49:45.618Z,1520696985.618 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:49:46.021Z,1520696986.021 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:49:46.420Z,1520696986.420 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:49:46.821Z,1520696986.821 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:49:47.228Z,1520696987.228 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:49:47.623Z,1520696987.623 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:49:48.020Z,1520696988.020 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:49:48.418Z,1520696988.418 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:49:48.826Z,1520696988.826 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:49:49.221Z,1520696989.221 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:49:49.629Z,1520696989.629 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:49:50.019Z,1520696990.019 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:49:50.419Z,1520696990.419 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:49:50.818Z,1520696990.818 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:49:51.219Z,1520696991.219 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:49:51.612Z,1520696991.612 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:49:52.012Z,1520696992.012 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:49:52.413Z,1520696992.413 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:49:52.812Z,1520696992.812 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:49:53.212Z,1520696993.212 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:49:53.612Z,1520696993.612 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:49:54.013Z,1520696994.013 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:49:54.428Z,1520696994.428 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:49:54.812Z,1520696994.812 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:49:55.208Z,1520696995.208 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:49:55.617Z,1520696995.617 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:49:56.012Z,1520696996.012 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:49:56.416Z,1520696996.416 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:49:56.812Z,1520696996.812 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:49:57.213Z,1520696997.213 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:49:57.609Z,1520696997.609 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:49:58.020Z,1520696998.020 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:49:58.413Z,1520696998.413 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:49:58.819Z,1520696998.819 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:49:59.221Z,1520696999.221 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:49:59.618Z,1520696999.618 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:50:00.019Z,1520697000.019 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:50:00.422Z,1520697000.422 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:50:00.823Z,1520697000.823 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:50:01.220Z,1520697001.220 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:50:01.618Z,1520697001.618 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:50:02.015Z,1520697002.015 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:50:02.423Z,1520697002.423 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:50:02.816Z,1520697002.816 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:50:03.224Z,1520697003.224 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:50:03.610Z,1520697003.610 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:50:04.032Z,1520697004.032 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:50:04.412Z,1520697004.412 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:50:04.816Z,1520697004.816 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:50:05.217Z,1520697005.217 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:50:08.441Z,1520697008.441 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:50:08.550Z,1520697008.550 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:50:08.912Z,1520697008.912 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:50:09.312Z,1520697009.312 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:50:09.705Z,1520697009.705 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:50:10.113Z,1520697010.113 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:50:10.513Z,1520697010.513 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:50:10.912Z,1520697010.912 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:50:11.312Z,1520697011.312 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:50:11.711Z,1520697011.711 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:50:12.111Z,1520697012.111 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:50:12.512Z,1520697012.512 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:50:12.911Z,1520697012.911 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:50:13.311Z,1520697013.311 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:50:13.713Z,1520697013.713 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:50:14.111Z,1520697014.111 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:50:14.515Z,1520697014.515 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:50:14.915Z,1520697014.915 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:50:15.312Z,1520697015.312 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:50:15.707Z,1520697015.707 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:50:16.108Z,1520697016.108 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:50:16.515Z,1520697016.515 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:50:16.911Z,1520697016.911 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:50:17.304Z,1520697017.304 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:50:17.700Z,1520697017.700 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:50:18.104Z,1520697018.104 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:50:18.524Z,1520697018.524 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:50:18.904Z,1520697018.904 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:50:19.300Z,1520697019.300 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:50:19.724Z,1520697019.724 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:50:20.100Z,1520697020.100 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:50:20.497Z,1520697020.497 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:50:20.908Z,1520697020.908 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:50:21.308Z,1520697021.308 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:50:21.708Z,1520697021.708 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:50:22.109Z,1520697022.109 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:50:22.509Z,1520697022.509 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:50:22.912Z,1520697022.912 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:50:23.310Z,1520697023.310 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:50:23.713Z,1520697023.713 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:50:24.110Z,1520697024.110 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:50:24.520Z,1520697024.520 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:50:24.912Z,1520697024.912 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:50:25.308Z,1520697025.308 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:50:25.712Z,1520697025.712 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:50:26.111Z,1520697026.111 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:50:26.512Z,1520697026.512 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:50:26.914Z,1520697026.914 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:50:27.308Z,1520697027.308 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:50:27.716Z,1520697027.716 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:50:28.108Z,1520697028.108 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:50:28.515Z,1520697028.515 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:50:28.900Z,1520697028.900 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:50:29.324Z,1520697029.324 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:50:29.704Z,1520697029.704 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:50:30.100Z,1520697030.100 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:50:30.504Z,1520697030.504 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:50:30.904Z,1520697030.904 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:50:31.300Z,1520697031.300 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:50:31.716Z,1520697031.716 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:50:32.100Z,1520697032.100 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:50:32.500Z,1520697032.500 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:50:32.904Z,1520697032.904 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:50:33.300Z,1520697033.300 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:50:33.718Z,1520697033.718 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:50:34.104Z,1520697034.104 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:50:34.163Z,1520697034.163 [CBIT](INFO): Clearing failed state for component NAL9602
2018-03-10T15:50:34.163Z,1520697034.163 [NAL9602] No Fault, FailCount= 5
2018-03-10T15:50:34.489Z,1520697034.489 [NAL9602](INFO): Powering up NAL9602
2018-03-10T15:50:34.506Z,1520697034.506 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:50:34.909Z,1520697034.909 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:50:35.305Z,1520697035.305 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:50:35.705Z,1520697035.705 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:50:36.108Z,1520697036.108 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:50:36.505Z,1520697036.505 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:50:36.903Z,1520697036.903 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:50:37.311Z,1520697037.311 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:50:37.709Z,1520697037.709 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:50:38.109Z,1520697038.109 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:50:38.510Z,1520697038.510 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:50:38.920Z,1520697038.920 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:50:39.309Z,1520697039.309 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:50:39.712Z,1520697039.712 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:50:40.111Z,1520697040.111 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:50:40.513Z,1520697040.513 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:50:40.913Z,1520697040.913 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:50:41.316Z,1520697041.316 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:50:41.716Z,1520697041.716 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:50:42.116Z,1520697042.116 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:50:42.512Z,1520697042.512 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:50:42.916Z,1520697042.916 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:50:43.317Z,1520697043.317 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:50:43.721Z,1520697043.721 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:50:44.112Z,1520697044.112 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:50:44.512Z,1520697044.512 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:50:44.912Z,1520697044.912 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:50:45.322Z,1520697045.322 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:50:45.688Z,1520697045.688 [NAL9602](INFO): NAL9602 initialized
2018-03-10T15:50:45.708Z,1520697045.708 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:50:46.124Z,1520697046.124 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:50:46.529Z,1520697046.529 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:50:46.930Z,1520697046.930 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:50:47.324Z,1520697047.324 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:50:47.700Z,1520697047.700 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:50:48.105Z,1520697048.105 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:50:48.505Z,1520697048.505 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:50:48.924Z,1520697048.924 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:50:49.323Z,1520697049.323 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:50:49.723Z,1520697049.723 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:50:50.104Z,1520697050.104 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:50:50.505Z,1520697050.505 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:50:50.912Z,1520697050.912 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:50:51.326Z,1520697051.326 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:50:51.705Z,1520697051.705 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:50:52.104Z,1520697052.104 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:50:52.505Z,1520697052.505 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:50:52.909Z,1520697052.909 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:50:53.304Z,1520697053.304 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:50:53.729Z,1520697053.729 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:50:54.111Z,1520697054.111 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:50:54.515Z,1520697054.515 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:50:54.915Z,1520697054.915 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:50:55.309Z,1520697055.309 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:50:55.705Z,1520697055.705 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:50:56.105Z,1520697056.105 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:50:56.505Z,1520697056.505 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:50:56.911Z,1520697056.911 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:50:57.313Z,1520697057.313 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:50:57.710Z,1520697057.710 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:50:58.114Z,1520697058.114 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:50:58.512Z,1520697058.512 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:50:58.927Z,1520697058.927 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:50:59.323Z,1520697059.323 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:50:59.732Z,1520697059.732 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:51:00.127Z,1520697060.127 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:51:00.508Z,1520697060.508 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:51:00.905Z,1520697060.905 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:51:01.301Z,1520697061.301 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:51:01.705Z,1520697061.705 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:51:02.105Z,1520697062.105 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:51:02.505Z,1520697062.505 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:51:02.933Z,1520697062.933 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:51:03.326Z,1520697063.326 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:51:03.701Z,1520697063.701 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:51:04.124Z,1520697064.124 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:51:04.536Z,1520697064.536 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:51:04.927Z,1520697064.927 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:51:05.324Z,1520697065.324 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:51:08.439Z,1520697068.439 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:51:08.578Z,1520697068.578 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:51:08.956Z,1520697068.956 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:51:09.360Z,1520697069.360 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:51:09.768Z,1520697069.768 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:51:10.159Z,1520697070.159 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:51:10.564Z,1520697070.564 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:51:10.947Z,1520697070.947 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:51:11.361Z,1520697071.361 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:51:11.749Z,1520697071.749 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:51:12.144Z,1520697072.144 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:51:12.556Z,1520697072.556 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:51:12.954Z,1520697072.954 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:51:13.344Z,1520697073.344 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:51:13.744Z,1520697073.744 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:51:14.145Z,1520697074.145 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:51:14.559Z,1520697074.559 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:51:14.968Z,1520697074.968 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:51:15.358Z,1520697075.358 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:51:15.756Z,1520697075.756 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:51:16.170Z,1520697076.170 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:51:16.545Z,1520697076.545 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:51:16.945Z,1520697076.945 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:51:17.361Z,1520697077.361 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:51:17.757Z,1520697077.757 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:51:18.154Z,1520697078.154 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:51:18.550Z,1520697078.550 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:51:18.949Z,1520697078.949 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:51:19.348Z,1520697079.348 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:51:19.767Z,1520697079.767 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:51:20.156Z,1520697080.156 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:51:20.559Z,1520697080.559 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:51:20.958Z,1520697080.958 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:51:21.350Z,1520697081.350 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:51:21.756Z,1520697081.756 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:51:22.152Z,1520697082.152 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:51:22.554Z,1520697082.554 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:51:22.941Z,1520697082.941 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:51:23.348Z,1520697083.348 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:51:23.750Z,1520697083.750 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:51:24.153Z,1520697084.153 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:51:24.560Z,1520697084.560 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:51:24.956Z,1520697084.956 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:51:25.356Z,1520697085.356 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:51:25.755Z,1520697085.755 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:51:26.155Z,1520697086.155 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:51:26.545Z,1520697086.545 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:51:26.945Z,1520697086.945 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:51:27.341Z,1520697087.341 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:51:27.750Z,1520697087.750 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:51:28.149Z,1520697088.149 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:51:28.553Z,1520697088.553 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:51:28.952Z,1520697088.952 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:51:29.362Z,1520697089.362 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:51:29.754Z,1520697089.754 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:51:30.162Z,1520697090.162 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:51:30.563Z,1520697090.563 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:51:30.963Z,1520697090.963 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:51:31.366Z,1520697091.366 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:51:31.756Z,1520697091.756 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:51:32.145Z,1520697092.145 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:51:32.557Z,1520697092.557 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:51:32.944Z,1520697092.944 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:51:33.340Z,1520697093.340 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:51:33.741Z,1520697093.741 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:51:34.164Z,1520697094.164 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:51:34.546Z,1520697094.546 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:51:34.945Z,1520697094.945 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:51:35.363Z,1520697095.363 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:51:35.760Z,1520697095.760 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:51:36.175Z,1520697096.175 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:51:36.565Z,1520697096.565 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:51:36.944Z,1520697096.944 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:51:37.349Z,1520697097.349 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:51:37.745Z,1520697097.745 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:51:38.140Z,1520697098.140 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:51:38.549Z,1520697098.549 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:51:38.944Z,1520697098.944 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:51:39.349Z,1520697099.349 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:51:39.748Z,1520697099.748 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:51:40.144Z,1520697100.144 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:51:40.569Z,1520697100.569 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:51:40.968Z,1520697100.968 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:51:41.356Z,1520697101.356 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:51:41.755Z,1520697101.755 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:51:42.153Z,1520697102.153 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:51:42.548Z,1520697102.548 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:51:42.945Z,1520697102.945 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:51:43.349Z,1520697103.349 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:51:43.745Z,1520697103.745 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:51:44.146Z,1520697104.146 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:51:44.548Z,1520697104.548 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:51:44.953Z,1520697104.953 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:51:45.344Z,1520697105.344 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:51:45.764Z,1520697105.764 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:51:46.175Z,1520697106.175 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:51:46.563Z,1520697106.563 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:51:46.963Z,1520697106.963 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:51:47.350Z,1520697107.350 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:51:47.753Z,1520697107.753 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:51:48.154Z,1520697108.154 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:51:48.550Z,1520697108.550 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:51:48.953Z,1520697108.953 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:51:49.353Z,1520697109.353 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:51:49.752Z,1520697109.752 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:51:50.150Z,1520697110.150 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:51:50.557Z,1520697110.557 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:51:50.963Z,1520697110.963 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:51:51.365Z,1520697111.365 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:51:51.764Z,1520697111.764 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:51:52.163Z,1520697112.163 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:51:52.558Z,1520697112.558 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:51:52.958Z,1520697112.958 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:51:53.357Z,1520697113.357 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:51:53.753Z,1520697113.753 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:51:54.154Z,1520697114.154 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:51:54.562Z,1520697114.562 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:51:54.949Z,1520697114.949 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:51:55.345Z,1520697115.345 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:51:55.745Z,1520697115.745 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:51:56.170Z,1520697116.170 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:51:56.562Z,1520697116.562 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:51:56.969Z,1520697116.969 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:51:57.351Z,1520697117.351 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:51:57.750Z,1520697117.750 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:51:58.144Z,1520697118.144 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:51:58.557Z,1520697118.557 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:51:58.953Z,1520697118.953 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:51:59.352Z,1520697119.352 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:51:59.749Z,1520697119.749 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:52:00.153Z,1520697120.153 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:52:00.570Z,1520697120.570 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:52:00.972Z,1520697120.972 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:52:01.369Z,1520697121.369 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:52:01.778Z,1520697121.778 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:52:02.159Z,1520697122.159 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:52:02.560Z,1520697122.560 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:52:02.970Z,1520697122.970 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:52:03.357Z,1520697123.357 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:52:03.753Z,1520697123.753 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:52:04.150Z,1520697124.150 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:52:04.550Z,1520697124.550 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:52:04.953Z,1520697124.953 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:52:04.998Z,1520697124.998 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-03-10T15:47:04.8Z
2018-03-10T15:52:05.003Z,1520697125.003 [Default:CheckIn:Read_GPS] Stopped
2018-03-10T15:52:05.003Z,1520697125.003 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-03-10T15:52:05.354Z,1520697125.354 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:52:08.816Z,1520697128.816 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:52:08.952Z,1520697128.952 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:52:08.994Z,1520697128.994 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T15:52:08.995Z,1520697128.995 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 134
2018-03-10T15:52:08.995Z,1520697128.995 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-10T15:52:09.007Z,1520697129.007 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-10T15:52:09.290Z,1520697129.290 [DataOverHttps](INFO): Sending 69 bytes from file Logs/20180310T051512/Courier0248.lzma
2018-03-10T15:52:09.327Z,1520697129.327 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:52:09.379Z,1520697129.379 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-10T15:52:09.379Z,1520697129.379 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 134
2018-03-10T15:52:09.719Z,1520697129.719 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:52:09.762Z,1520697129.762 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-10T15:52:09.762Z,1520697129.762 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-10T15:52:09.763Z,1520697129.763 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-10T15:52:10.078Z,1520697130.078 [DataOverHttps](INFO): Moved sent file to Logs/20180310T051512/Courier0248.lzma.bak
2018-03-10T15:52:10.078Z,1520697130.078 [DataOverHttps](INFO): SBD MOMSN=8005837
2018-03-10T15:52:10.113Z,1520697130.113 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:52:10.805Z,1520697130.805 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:52:10.949Z,1520697130.949 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:52:11.317Z,1520697131.317 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:52:14.583Z,1520697134.583 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:52:14.739Z,1520697134.739 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:52:15.087Z,1520697135.087 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:52:15.487Z,1520697135.487 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:52:15.877Z,1520697135.877 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:52:16.274Z,1520697136.274 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:52:16.676Z,1520697136.676 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:52:19.823Z,1520697139.823 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:52:19.999Z,1520697139.999 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:52:20.279Z,1520697140.279 [DataOverHttps](INFO): Sending 280 bytes from file Logs/20180310T051512/Express0249.lzma
2018-03-10T15:52:20.342Z,1520697140.342 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:52:20.722Z,1520697140.722 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:52:21.078Z,1520697141.078 [DataOverHttps](INFO): Moved sent file to Logs/20180310T051512/Express0249.lzma.bak
2018-03-10T15:52:21.078Z,1520697141.078 [DataOverHttps](INFO): SBD MOMSN=8005840
2018-03-10T15:52:21.137Z,1520697141.137 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:52:21.799Z,1520697141.799 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:52:21.829Z,1520697141.829 [Default:CheckIn:Read_Iridium] Stopped
2018-03-10T15:52:21.829Z,1520697141.829 [Default:CheckIn:C.Wait] Running Loop=1
2018-03-10T15:52:21.829Z,1520697141.829 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-03-10T15:52:21.967Z,1520697141.967 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:52:25.092Z,1520697145.092 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session.
2018-03-10T15:52:25.124Z,1520697145.124 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:52:25.267Z,1520697145.267 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:52:25.656Z,1520697145.656 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:52:26.053Z,1520697146.053 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:52:26.461Z,1520697146.461 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:52:26.856Z,1520697146.856 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:52:27.260Z,1520697147.260 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:52:27.656Z,1520697147.656 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:52:28.056Z,1520697148.056 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:52:28.456Z,1520697148.456 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:52:28.859Z,1520697148.859 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:52:29.266Z,1520697149.266 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:52:29.653Z,1520697149.653 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:52:30.066Z,1520697150.066 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:52:30.456Z,1520697150.456 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:52:30.855Z,1520697150.855 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:52:31.244Z,1520697151.244 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:52:31.660Z,1520697151.660 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:52:32.057Z,1520697152.057 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:52:32.456Z,1520697152.456 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:52:32.856Z,1520697152.856 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:52:33.256Z,1520697153.256 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:52:33.656Z,1520697153.656 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:52:34.069Z,1520697154.069 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:52:34.444Z,1520697154.444 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:52:34.844Z,1520697154.844 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:52:35.260Z,1520697155.260 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:52:35.655Z,1520697155.655 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:52:36.056Z,1520697156.056 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:52:36.456Z,1520697156.456 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:52:36.860Z,1520697156.860 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:52:37.256Z,1520697157.256 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:52:37.657Z,1520697157.657 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:52:38.060Z,1520697158.060 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:52:38.460Z,1520697158.460 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:52:38.849Z,1520697158.849 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:52:39.244Z,1520697159.244 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:52:39.648Z,1520697159.648 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:52:40.068Z,1520697160.068 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:52:40.444Z,1520697160.444 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:52:40.843Z,1520697160.843 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:52:41.248Z,1520697161.248 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:52:41.652Z,1520697161.652 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:52:42.044Z,1520697162.044 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:52:42.444Z,1520697162.444 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:52:42.852Z,1520697162.852 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:52:43.252Z,1520697163.252 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:52:43.649Z,1520697163.649 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:52:44.052Z,1520697164.052 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:52:44.452Z,1520697164.452 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:52:44.856Z,1520697164.856 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:52:45.248Z,1520697165.248 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:52:45.653Z,1520697165.653 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:52:46.048Z,1520697166.048 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:52:46.448Z,1520697166.448 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:52:46.843Z,1520697166.843 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:52:47.247Z,1520697167.247 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:52:47.654Z,1520697167.654 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:52:48.049Z,1520697168.049 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:52:48.452Z,1520697168.452 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:52:48.854Z,1520697168.854 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:52:49.256Z,1520697169.256 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:52:49.652Z,1520697169.652 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:52:50.062Z,1520697170.062 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:52:50.458Z,1520697170.458 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:52:50.857Z,1520697170.857 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:52:51.261Z,1520697171.261 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:52:51.656Z,1520697171.656 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:52:52.057Z,1520697172.057 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:52:52.467Z,1520697172.467 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:52:52.856Z,1520697172.856 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:52:53.262Z,1520697173.262 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:52:53.656Z,1520697173.656 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:52:54.057Z,1520697174.057 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:52:54.460Z,1520697174.460 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:52:54.860Z,1520697174.860 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:52:55.244Z,1520697175.244 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:52:55.636Z,1520697175.636 [NAL9602](INFO): Powering down
2018-03-10T15:52:55.654Z,1520697175.654 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:52:56.051Z,1520697176.051 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:52:56.444Z,1520697176.444 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:52:56.844Z,1520697176.844 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:52:57.252Z,1520697177.252 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:52:57.648Z,1520697177.648 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:52:58.056Z,1520697178.056 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:52:58.453Z,1520697178.453 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:52:58.856Z,1520697178.856 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:52:59.264Z,1520697179.264 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:52:59.654Z,1520697179.654 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:53:00.059Z,1520697180.059 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:53:00.457Z,1520697180.457 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:53:00.861Z,1520697180.861 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:53:01.261Z,1520697181.261 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:53:01.655Z,1520697181.655 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:53:02.045Z,1520697182.045 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:53:02.449Z,1520697182.449 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:53:02.857Z,1520697182.857 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:53:03.248Z,1520697183.248 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:53:03.648Z,1520697183.648 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:53:04.055Z,1520697184.055 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:53:04.447Z,1520697184.447 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:53:04.849Z,1520697184.849 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:53:05.248Z,1520697185.248 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:53:05.660Z,1520697185.660 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:53:06.056Z,1520697186.056 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:53:06.456Z,1520697186.456 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:53:06.853Z,1520697186.853 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:53:07.256Z,1520697187.256 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:53:07.664Z,1520697187.664 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:53:08.057Z,1520697188.057 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:53:08.457Z,1520697188.457 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:53:08.855Z,1520697188.855 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:53:09.257Z,1520697189.257 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:53:09.658Z,1520697189.658 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:53:10.061Z,1520697190.061 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:53:10.460Z,1520697190.460 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:53:10.856Z,1520697190.856 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:53:11.249Z,1520697191.249 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:53:11.682Z,1520697191.682 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:53:12.054Z,1520697192.054 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:53:12.460Z,1520697192.460 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:53:12.853Z,1520697192.853 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:53:13.253Z,1520697193.253 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:53:13.653Z,1520697193.653 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:53:14.053Z,1520697194.053 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:53:14.456Z,1520697194.456 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:53:14.853Z,1520697194.853 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:53:15.257Z,1520697195.257 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:53:15.655Z,1520697195.655 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:53:16.055Z,1520697196.055 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:53:16.456Z,1520697196.456 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:53:16.857Z,1520697196.857 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:53:17.260Z,1520697197.260 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:53:17.660Z,1520697197.660 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:53:18.056Z,1520697198.056 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:53:18.465Z,1520697198.465 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:53:18.845Z,1520697198.845 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:53:19.244Z,1520697199.244 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:53:19.657Z,1520697199.657 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:53:20.060Z,1520697200.060 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:53:20.456Z,1520697200.456 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:53:20.856Z,1520697200.856 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:53:21.244Z,1520697201.244 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:53:21.660Z,1520697201.660 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:53:22.053Z,1520697202.053 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:53:22.460Z,1520697202.460 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:53:25.712Z,1520697205.712 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:53:25.824Z,1520697205.824 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:53:26.188Z,1520697206.188 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:53:26.582Z,1520697206.582 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:53:26.984Z,1520697206.984 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:53:27.378Z,1520697207.378 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:53:27.785Z,1520697207.785 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:53:28.180Z,1520697208.180 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:53:28.582Z,1520697208.582 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:53:28.982Z,1520697208.982 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:53:29.379Z,1520697209.379 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:53:29.784Z,1520697209.784 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:53:30.184Z,1520697210.184 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:53:30.584Z,1520697210.584 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:53:30.984Z,1520697210.984 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:53:31.384Z,1520697211.384 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:53:31.771Z,1520697211.771 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:53:32.180Z,1520697212.180 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:53:32.576Z,1520697212.576 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:53:32.980Z,1520697212.980 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:53:33.377Z,1520697213.377 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:53:33.772Z,1520697213.772 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:53:34.174Z,1520697214.174 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:53:34.576Z,1520697214.576 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:53:34.980Z,1520697214.980 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:53:35.380Z,1520697215.380 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:53:35.780Z,1520697215.780 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:53:36.180Z,1520697216.180 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:53:36.580Z,1520697216.580 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:53:36.984Z,1520697216.984 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:53:37.392Z,1520697217.392 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:53:37.786Z,1520697217.786 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:53:38.185Z,1520697218.185 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:53:38.592Z,1520697218.592 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:53:38.984Z,1520697218.984 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:53:39.382Z,1520697219.382 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:53:39.785Z,1520697219.785 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:53:40.184Z,1520697220.184 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:53:40.584Z,1520697220.584 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:53:40.989Z,1520697220.989 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:53:41.377Z,1520697221.377 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:53:41.777Z,1520697221.777 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:53:42.181Z,1520697222.181 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:53:42.577Z,1520697222.577 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:53:42.977Z,1520697222.977 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:53:43.380Z,1520697223.380 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:53:43.776Z,1520697223.776 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:53:44.178Z,1520697224.178 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:53:44.576Z,1520697224.576 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:53:44.979Z,1520697224.979 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:53:45.387Z,1520697225.387 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:53:45.787Z,1520697225.787 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:53:46.193Z,1520697226.193 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:53:46.582Z,1520697226.582 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:53:46.994Z,1520697226.994 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:53:47.384Z,1520697227.384 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:53:47.776Z,1520697227.776 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:53:48.202Z,1520697228.202 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:53:48.574Z,1520697228.574 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:53:48.980Z,1520697228.980 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:53:49.380Z,1520697229.380 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:53:49.777Z,1520697229.777 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:53:50.176Z,1520697230.176 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:53:50.576Z,1520697230.576 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:53:50.976Z,1520697230.976 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:53:51.376Z,1520697231.376 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:53:51.776Z,1520697231.776 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:53:52.177Z,1520697232.177 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:53:52.577Z,1520697232.577 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:53:52.977Z,1520697232.977 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:53:53.382Z,1520697233.382 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:53:53.782Z,1520697233.782 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:53:54.185Z,1520697234.185 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:53:54.581Z,1520697234.581 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:53:54.983Z,1520697234.983 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:53:55.385Z,1520697235.385 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:53:55.776Z,1520697235.776 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:53:56.182Z,1520697236.182 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:53:56.585Z,1520697236.585 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:53:56.984Z,1520697236.984 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:53:57.384Z,1520697237.384 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:53:57.783Z,1520697237.783 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:53:58.184Z,1520697238.184 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:53:58.584Z,1520697238.584 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:53:58.970Z,1520697238.970 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:53:59.388Z,1520697239.388 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:53:59.776Z,1520697239.776 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:54:00.172Z,1520697240.172 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:54:00.572Z,1520697240.572 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:54:00.976Z,1520697240.976 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:54:01.389Z,1520697241.389 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:54:01.788Z,1520697241.788 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:54:02.176Z,1520697242.176 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:54:02.573Z,1520697242.573 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:54:02.976Z,1520697242.976 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:54:03.376Z,1520697243.376 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:54:03.773Z,1520697243.773 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:54:04.176Z,1520697244.176 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:54:04.576Z,1520697244.576 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:54:04.988Z,1520697244.988 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:54:05.376Z,1520697245.376 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:54:05.776Z,1520697245.776 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:54:06.189Z,1520697246.189 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:54:06.588Z,1520697246.588 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:54:06.976Z,1520697246.976 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:54:07.376Z,1520697247.376 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:54:07.788Z,1520697247.788 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:54:08.176Z,1520697248.176 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:54:08.572Z,1520697248.572 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:54:08.976Z,1520697248.976 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:54:09.396Z,1520697249.396 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:54:09.772Z,1520697249.772 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:54:10.172Z,1520697250.172 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:54:10.596Z,1520697250.596 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:54:10.977Z,1520697250.977 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:54:11.376Z,1520697251.376 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:54:11.772Z,1520697251.772 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:54:12.169Z,1520697252.169 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:54:12.580Z,1520697252.580 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:54:12.985Z,1520697252.985 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:54:13.373Z,1520697253.373 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:54:13.784Z,1520697253.784 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:54:14.184Z,1520697254.184 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:54:14.581Z,1520697254.581 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:54:14.982Z,1520697254.982 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:54:15.396Z,1520697255.396 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:54:15.785Z,1520697255.785 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:54:16.186Z,1520697256.186 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:54:16.580Z,1520697256.580 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:54:16.972Z,1520697256.972 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:54:17.376Z,1520697257.376 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:54:17.794Z,1520697257.794 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:54:18.177Z,1520697258.177 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:54:18.577Z,1520697258.577 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:54:18.981Z,1520697258.981 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:54:19.381Z,1520697259.381 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:54:19.781Z,1520697259.781 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:54:20.176Z,1520697260.176 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:54:20.576Z,1520697260.576 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:54:20.997Z,1520697260.997 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:54:21.376Z,1520697261.376 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:54:21.776Z,1520697261.776 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:54:22.176Z,1520697262.176 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:54:22.598Z,1520697262.598 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:54:25.793Z,1520697265.793 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:54:25.917Z,1520697265.917 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:54:26.268Z,1520697266.268 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:54:26.664Z,1520697266.664 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:54:27.066Z,1520697267.066 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:54:27.465Z,1520697267.465 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:54:27.866Z,1520697267.866 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:54:28.272Z,1520697268.272 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:54:28.656Z,1520697268.656 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:54:29.056Z,1520697269.056 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:54:29.459Z,1520697269.459 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:54:29.864Z,1520697269.864 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:54:30.256Z,1520697270.256 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:54:30.657Z,1520697270.657 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:54:31.068Z,1520697271.068 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:54:31.468Z,1520697271.468 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:54:31.868Z,1520697271.868 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:54:32.260Z,1520697272.260 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:54:32.666Z,1520697272.666 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:54:33.062Z,1520697273.062 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:54:33.460Z,1520697273.460 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:54:33.856Z,1520697273.856 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:54:34.260Z,1520697274.260 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:54:34.656Z,1520697274.656 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:54:35.056Z,1520697275.056 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:54:35.460Z,1520697275.460 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:54:35.864Z,1520697275.864 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:54:36.256Z,1520697276.256 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:54:36.655Z,1520697276.655 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:54:37.067Z,1520697277.067 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:54:37.467Z,1520697277.467 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:54:37.866Z,1520697277.866 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:54:38.259Z,1520697278.259 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:54:38.656Z,1520697278.656 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:54:39.056Z,1520697279.056 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:54:39.462Z,1520697279.462 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:54:39.861Z,1520697279.861 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:54:40.265Z,1520697280.265 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:54:40.665Z,1520697280.665 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:54:41.064Z,1520697281.064 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:54:41.462Z,1520697281.462 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:54:41.868Z,1520697281.868 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:54:42.265Z,1520697282.265 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:54:42.663Z,1520697282.663 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:54:43.060Z,1520697283.060 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:54:43.463Z,1520697283.463 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:54:43.856Z,1520697283.856 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:54:44.256Z,1520697284.256 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:54:44.656Z,1520697284.656 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:54:45.057Z,1520697285.057 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:54:45.468Z,1520697285.468 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:54:45.868Z,1520697285.868 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:54:46.263Z,1520697286.263 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:54:46.665Z,1520697286.665 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:54:47.066Z,1520697287.066 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:54:47.465Z,1520697287.465 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:54:47.870Z,1520697287.870 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:54:48.264Z,1520697288.264 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:54:48.654Z,1520697288.654 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:54:49.060Z,1520697289.060 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:54:49.456Z,1520697289.456 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:54:49.854Z,1520697289.854 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:54:50.256Z,1520697290.256 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:54:50.672Z,1520697290.672 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:54:51.057Z,1520697291.057 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:54:51.464Z,1520697291.464 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:54:51.863Z,1520697291.863 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:54:52.268Z,1520697292.268 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:54:52.659Z,1520697292.659 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:54:53.056Z,1520697293.056 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:54:53.463Z,1520697293.463 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:54:53.869Z,1520697293.869 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:54:54.264Z,1520697294.264 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:54:54.665Z,1520697294.665 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:54:55.059Z,1520697295.059 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:54:55.460Z,1520697295.460 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:54:55.860Z,1520697295.860 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:54:56.257Z,1520697296.257 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:54:56.657Z,1520697296.657 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:54:57.061Z,1520697297.061 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:54:57.466Z,1520697297.466 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:54:57.869Z,1520697297.869 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:54:58.264Z,1520697298.264 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:54:58.664Z,1520697298.664 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:54:59.065Z,1520697299.065 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:54:59.456Z,1520697299.456 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:54:59.864Z,1520697299.864 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:55:00.256Z,1520697300.256 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:55:00.660Z,1520697300.660 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:55:01.056Z,1520697301.056 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:55:01.461Z,1520697301.461 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:55:01.860Z,1520697301.860 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:55:02.267Z,1520697302.267 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:55:02.661Z,1520697302.661 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:55:03.065Z,1520697303.065 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:55:03.465Z,1520697303.465 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:55:03.864Z,1520697303.864 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:55:04.277Z,1520697304.277 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:55:04.660Z,1520697304.660 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:55:05.064Z,1520697305.064 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:55:05.457Z,1520697305.457 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:55:05.865Z,1520697305.865 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:55:06.264Z,1520697306.264 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:55:06.661Z,1520697306.661 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:55:07.063Z,1520697307.063 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:55:07.464Z,1520697307.464 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:55:07.868Z,1520697307.868 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:55:08.264Z,1520697308.264 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:55:08.664Z,1520697308.664 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:55:09.052Z,1520697309.052 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:55:09.461Z,1520697309.461 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:55:09.872Z,1520697309.872 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:55:09.891Z,1520697309.891 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T15:55:09.891Z,1520697309.891 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 135
2018-03-10T15:55:09.891Z,1520697309.891 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-10T15:55:09.903Z,1520697309.903 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-10T15:55:10.252Z,1520697310.252 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:55:10.319Z,1520697310.319 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-10T15:55:10.319Z,1520697310.319 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 135
2018-03-10T15:55:10.656Z,1520697310.656 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:55:10.691Z,1520697310.691 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-10T15:55:10.692Z,1520697310.692 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-10T15:55:10.692Z,1520697310.692 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-10T15:55:11.057Z,1520697311.057 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:55:11.465Z,1520697311.465 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:55:11.874Z,1520697311.874 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:55:12.260Z,1520697312.260 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:55:12.652Z,1520697312.652 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:55:13.066Z,1520697313.066 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:55:13.460Z,1520697313.460 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:55:13.858Z,1520697313.858 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:55:14.268Z,1520697314.268 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:55:14.666Z,1520697314.666 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:55:15.065Z,1520697315.065 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:55:15.470Z,1520697315.470 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:55:15.866Z,1520697315.866 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:55:16.264Z,1520697316.264 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:55:16.656Z,1520697316.656 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:55:17.052Z,1520697317.052 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:55:17.452Z,1520697317.452 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:55:17.865Z,1520697317.865 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:55:18.261Z,1520697318.261 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:55:18.662Z,1520697318.662 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:55:19.064Z,1520697319.064 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:55:19.459Z,1520697319.459 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:55:19.869Z,1520697319.869 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:55:20.273Z,1520697320.273 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:55:20.661Z,1520697320.661 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:55:21.065Z,1520697321.065 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:55:21.465Z,1520697321.465 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:55:21.864Z,1520697321.864 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:55:22.259Z,1520697322.259 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:55:22.665Z,1520697322.665 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:55:25.862Z,1520697325.862 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:55:26.012Z,1520697326.012 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:55:26.354Z,1520697326.354 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:55:26.765Z,1520697326.765 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:55:27.174Z,1520697327.174 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:55:27.556Z,1520697327.556 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:55:27.957Z,1520697327.957 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:55:28.345Z,1520697328.345 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:55:28.748Z,1520697328.748 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:55:29.144Z,1520697329.144 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:55:29.543Z,1520697329.543 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:55:29.948Z,1520697329.948 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:55:30.347Z,1520697330.347 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:55:30.745Z,1520697330.745 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:55:31.144Z,1520697331.144 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:55:31.544Z,1520697331.544 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:55:31.973Z,1520697331.973 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:55:32.360Z,1520697332.360 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:55:32.754Z,1520697332.754 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:55:33.150Z,1520697333.150 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:55:33.564Z,1520697333.564 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:55:33.968Z,1520697333.968 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:55:34.357Z,1520697334.357 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:55:34.766Z,1520697334.766 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:55:35.152Z,1520697335.152 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:55:35.553Z,1520697335.553 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:55:35.932Z,1520697335.932 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:55:36.352Z,1520697336.352 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:55:36.736Z,1520697336.736 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:55:37.152Z,1520697337.152 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:55:37.532Z,1520697337.532 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:55:37.928Z,1520697337.928 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:55:38.336Z,1520697338.336 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:55:38.772Z,1520697338.772 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:55:39.157Z,1520697339.157 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:55:39.546Z,1520697339.546 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:55:39.956Z,1520697339.956 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:55:40.364Z,1520697340.364 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:55:40.760Z,1520697340.760 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:55:40.804Z,1520697340.804 [CBIT](DEBUG): EFC running - data check-sum false
2018-03-10T15:55:41.143Z,1520697341.143 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:55:41.552Z,1520697341.552 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:55:41.956Z,1520697341.956 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:55:42.350Z,1520697342.350 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:55:42.745Z,1520697342.745 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:55:43.141Z,1520697343.141 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:55:43.546Z,1520697343.546 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:55:43.952Z,1520697343.952 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:55:44.348Z,1520697344.348 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:55:44.741Z,1520697344.741 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:55:45.129Z,1520697345.129 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:55:45.544Z,1520697345.544 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:55:45.970Z,1520697345.970 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:55:46.369Z,1520697346.369 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:55:46.760Z,1520697346.760 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:55:47.168Z,1520697347.168 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:55:47.568Z,1520697347.568 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:55:47.961Z,1520697347.961 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:55:48.366Z,1520697348.366 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:55:48.744Z,1520697348.744 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:55:49.140Z,1520697349.140 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:55:49.532Z,1520697349.532 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:55:49.948Z,1520697349.948 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:55:50.348Z,1520697350.348 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:55:50.743Z,1520697350.743 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:55:51.140Z,1520697351.140 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:55:51.541Z,1520697351.541 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:55:51.947Z,1520697351.947 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:55:52.382Z,1520697352.382 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:55:52.765Z,1520697352.765 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:55:53.149Z,1520697353.149 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:55:53.551Z,1520697353.551 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:55:53.968Z,1520697353.968 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:55:54.362Z,1520697354.362 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:55:54.730Z,1520697354.730 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:55:55.157Z,1520697355.157 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:55:55.565Z,1520697355.565 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:55:55.952Z,1520697355.952 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:55:55.961Z,1520697355.961 [BPC1](ERROR): Failed to receive battery data
2018-03-10T15:55:55.961Z,1520697355.961 [BPC1] Communications Fault, FailCount= 1
2018-03-10T15:55:55.961Z,1520697355.961 [BPC1](ERROR): Communications Fault
2018-03-10T15:55:55.989Z,1520697355.989 [CBIT](ERROR): Communications Fault in component: BPC1
2018-03-10T15:55:56.340Z,1520697356.340 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:55:56.733Z,1520697356.733 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:55:57.144Z,1520697357.144 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:55:57.186Z,1520697357.186 [CBIT](INFO): Clearing failed state for component BPC1
2018-03-10T15:55:57.186Z,1520697357.186 [BPC1] No Fault, FailCount= 1
2018-03-10T15:55:57.540Z,1520697357.540 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:55:57.940Z,1520697357.940 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:55:58.331Z,1520697358.331 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:55:58.741Z,1520697358.741 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:55:59.136Z,1520697359.136 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:55:59.590Z,1520697359.590 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:55:59.956Z,1520697359.956 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:56:00.345Z,1520697360.345 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:56:00.750Z,1520697360.750 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:56:01.160Z,1520697361.160 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:56:01.557Z,1520697361.557 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:56:01.949Z,1520697361.949 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:56:02.353Z,1520697362.353 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:56:02.757Z,1520697362.757 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:56:03.145Z,1520697363.145 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:56:03.546Z,1520697363.546 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:56:03.937Z,1520697363.937 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:56:04.348Z,1520697364.348 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:56:04.748Z,1520697364.748 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:56:05.140Z,1520697365.140 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:56:05.548Z,1520697365.548 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:56:05.940Z,1520697365.940 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:56:06.341Z,1520697366.341 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:56:06.792Z,1520697366.792 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:56:07.157Z,1520697367.157 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:56:07.546Z,1520697367.546 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:56:07.956Z,1520697367.956 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:56:08.365Z,1520697368.365 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:56:08.764Z,1520697368.764 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:56:09.156Z,1520697369.156 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:56:09.560Z,1520697369.560 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:56:09.952Z,1520697369.952 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:56:10.352Z,1520697370.352 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:56:10.732Z,1520697370.732 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:56:11.138Z,1520697371.138 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:56:11.539Z,1520697371.539 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:56:11.936Z,1520697371.936 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:56:12.336Z,1520697372.336 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:56:12.736Z,1520697372.736 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:56:13.132Z,1520697373.132 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:56:13.568Z,1520697373.568 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:56:13.952Z,1520697373.952 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:56:14.348Z,1520697374.348 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:56:14.743Z,1520697374.743 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:56:15.176Z,1520697375.176 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:56:15.572Z,1520697375.572 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:56:15.940Z,1520697375.940 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:56:16.352Z,1520697376.352 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:56:16.757Z,1520697376.757 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:56:17.144Z,1520697377.144 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:56:17.544Z,1520697377.544 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:56:17.936Z,1520697377.936 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:56:18.348Z,1520697378.348 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:56:18.749Z,1520697378.749 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:56:19.144Z,1520697379.144 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:56:19.537Z,1520697379.537 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:56:19.941Z,1520697379.941 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:56:20.340Z,1520697380.340 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:56:20.760Z,1520697380.760 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:56:21.160Z,1520697381.160 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:56:21.557Z,1520697381.557 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:56:21.960Z,1520697381.960 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:56:22.368Z,1520697382.368 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:56:22.770Z,1520697382.770 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:56:25.902Z,1520697385.902 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:56:26.022Z,1520697386.022 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:56:26.395Z,1520697386.395 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:56:26.784Z,1520697386.784 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:56:27.192Z,1520697387.192 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:56:27.586Z,1520697387.586 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:56:27.616Z,1520697387.616 [BPC1](FAULT): Failed to initialize
2018-03-10T15:56:27.616Z,1520697387.616 [BPC1] Communications Fault, FailCount= 2
2018-03-10T15:56:27.617Z,1520697387.617 [BPC1](ERROR): Communications Fault
2018-03-10T15:56:27.651Z,1520697387.651 [CBIT](ERROR): Communications Fault in component: BPC1
2018-03-10T15:56:27.984Z,1520697387.984 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:56:28.387Z,1520697388.387 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:56:28.796Z,1520697388.796 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:56:28.851Z,1520697388.851 [CBIT](INFO): Clearing failed state for component BPC1
2018-03-10T15:56:28.851Z,1520697388.851 [BPC1] No Fault, FailCount= 2
2018-03-10T15:56:29.181Z,1520697389.181 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:56:29.585Z,1520697389.585 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:56:29.994Z,1520697389.994 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:56:30.389Z,1520697390.389 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:56:30.786Z,1520697390.786 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:56:31.188Z,1520697391.188 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:56:31.585Z,1520697391.585 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:56:31.994Z,1520697391.994 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:56:32.394Z,1520697392.394 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:56:32.776Z,1520697392.776 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:56:33.196Z,1520697393.196 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:56:33.594Z,1520697393.594 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:56:33.981Z,1520697393.981 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:56:34.381Z,1520697394.381 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:56:34.794Z,1520697394.794 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:56:35.179Z,1520697395.179 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:56:35.602Z,1520697395.602 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:56:35.998Z,1520697395.998 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:56:36.378Z,1520697396.378 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:56:36.796Z,1520697396.796 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:56:37.181Z,1520697397.181 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:56:37.585Z,1520697397.585 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:56:37.997Z,1520697397.997 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:56:38.383Z,1520697398.383 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:56:38.778Z,1520697398.778 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:56:39.181Z,1520697399.181 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:56:39.583Z,1520697399.583 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:56:39.983Z,1520697399.983 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:56:40.381Z,1520697400.381 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:56:40.804Z,1520697400.804 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:56:41.182Z,1520697401.182 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:56:41.580Z,1520697401.580 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:56:41.993Z,1520697401.993 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:56:42.385Z,1520697402.385 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:56:42.780Z,1520697402.780 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:56:43.184Z,1520697403.184 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:56:43.585Z,1520697403.585 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:56:43.987Z,1520697403.987 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:56:44.388Z,1520697404.388 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:56:44.783Z,1520697404.783 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:56:45.188Z,1520697405.188 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:56:45.588Z,1520697405.588 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:56:45.992Z,1520697405.992 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:56:46.389Z,1520697406.389 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:56:46.788Z,1520697406.788 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:56:47.187Z,1520697407.187 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:56:47.583Z,1520697407.583 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:56:47.996Z,1520697407.996 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:56:48.385Z,1520697408.385 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:56:48.788Z,1520697408.788 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:56:49.189Z,1520697409.189 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:56:49.587Z,1520697409.587 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:56:49.984Z,1520697409.984 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:56:50.394Z,1520697410.394 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:56:50.787Z,1520697410.787 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:56:51.186Z,1520697411.186 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:56:51.588Z,1520697411.588 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:56:51.995Z,1520697411.995 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:56:52.389Z,1520697412.389 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:56:52.786Z,1520697412.786 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:56:53.183Z,1520697413.183 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:56:53.577Z,1520697413.577 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:56:53.983Z,1520697413.983 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:56:54.378Z,1520697414.378 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:56:54.776Z,1520697414.776 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:56:55.180Z,1520697415.180 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:56:55.579Z,1520697415.579 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:56:55.980Z,1520697415.980 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:56:56.384Z,1520697416.384 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:56:56.776Z,1520697416.776 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:56:57.186Z,1520697417.186 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:56:57.583Z,1520697417.583 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:56:57.980Z,1520697417.980 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:56:58.380Z,1520697418.380 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:56:58.787Z,1520697418.787 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:56:59.188Z,1520697419.188 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:56:59.593Z,1520697419.593 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:56:59.604Z,1520697419.604 [BPC1](FAULT): Failed to initialize
2018-03-10T15:56:59.604Z,1520697419.604 [BPC1] Communications Fault, FailCount= 3
2018-03-10T15:56:59.604Z,1520697419.604 [BPC1](ERROR): Communications Fault
2018-03-10T15:56:59.676Z,1520697419.676 [CBIT](ERROR): Communications Fault in component: BPC1
2018-03-10T15:56:59.998Z,1520697419.998 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:57:00.384Z,1520697420.384 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:57:00.791Z,1520697420.791 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:57:00.833Z,1520697420.833 [CBIT](INFO): Clearing failed state for component BPC1
2018-03-10T15:57:00.833Z,1520697420.833 [BPC1] No Fault, FailCount= 3
2018-03-10T15:57:01.196Z,1520697421.196 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:57:01.585Z,1520697421.585 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:57:01.988Z,1520697421.988 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:57:02.389Z,1520697422.389 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:57:02.793Z,1520697422.793 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:57:03.189Z,1520697423.189 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:57:03.584Z,1520697423.584 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:57:03.986Z,1520697423.986 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:57:04.393Z,1520697424.393 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:57:04.794Z,1520697424.794 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:57:05.188Z,1520697425.188 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:57:05.590Z,1520697425.590 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:57:06.002Z,1520697426.002 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:57:06.392Z,1520697426.392 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:57:06.778Z,1520697426.778 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:57:07.203Z,1520697427.203 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:57:07.576Z,1520697427.576 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:57:07.996Z,1520697427.996 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:57:08.395Z,1520697428.395 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:57:08.778Z,1520697428.778 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:57:09.174Z,1520697429.174 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:57:09.580Z,1520697429.580 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:57:09.986Z,1520697429.986 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:57:10.383Z,1520697430.383 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:57:10.784Z,1520697430.784 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:57:11.180Z,1520697431.180 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:57:11.580Z,1520697431.580 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:57:11.984Z,1520697431.984 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:57:12.398Z,1520697432.398 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:57:12.781Z,1520697432.781 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:57:13.187Z,1520697433.187 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:57:13.583Z,1520697433.583 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:57:13.981Z,1520697433.981 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:57:14.386Z,1520697434.386 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:57:14.786Z,1520697434.786 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:57:15.186Z,1520697435.186 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:57:15.590Z,1520697435.590 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:57:15.990Z,1520697435.990 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:57:16.395Z,1520697436.395 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:57:16.795Z,1520697436.795 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:57:17.191Z,1520697437.191 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:57:17.584Z,1520697437.584 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:57:17.996Z,1520697437.996 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:57:18.387Z,1520697438.387 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:57:18.783Z,1520697438.783 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:57:19.200Z,1520697439.200 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:57:19.589Z,1520697439.589 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:57:19.992Z,1520697439.992 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:57:20.400Z,1520697440.400 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:57:20.796Z,1520697440.796 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:57:21.190Z,1520697441.190 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:57:21.593Z,1520697441.593 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:57:21.977Z,1520697441.977 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:57:22.022Z,1520697442.022 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-03-10T15:57:22.022Z,1520697442.022 [Default:CheckIn:C.Wait] Stopped
2018-03-10T15:57:22.022Z,1520697442.022 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-03-10T15:57:22.022Z,1520697442.022 [Default:CheckIn:D] Running Loop=1
2018-03-10T15:57:22.399Z,1520697442.399 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:57:22.449Z,1520697442.449 [Default:CheckIn:D] Stopped
2018-03-10T15:57:22.449Z,1520697442.449 [Default:CheckIn:E] Running Loop=1
2018-03-10T15:57:22.789Z,1520697442.789 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:57:22.816Z,1520697442.816 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 638.075456 min 
2018-03-10T15:57:22.816Z,1520697442.816 [Default:CheckIn:E] Stopped
2018-03-10T15:57:22.816Z,1520697442.816 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-03-10T15:57:22.816Z,1520697442.816 [Default:CheckIn] Stopped
2018-03-10T15:57:22.816Z,1520697442.816 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-03-10T15:57:22.816Z,1520697442.816 [Default:CheckIn](INFO): Running loop #63
2018-03-10T15:57:22.816Z,1520697442.816 [Default:CheckIn] Running Loop=63
2018-03-10T15:57:22.817Z,1520697442.817 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-03-10T15:57:22.817Z,1520697442.817 [Default:CheckIn:Read_GPS] Running Loop=1
2018-03-10T15:57:26.013Z,1520697446.013 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:57:26.102Z,1520697446.102 [NAL9602](INFO): Powering up
2018-03-10T15:57:26.119Z,1520697446.119 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:57:26.532Z,1520697446.532 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:57:26.923Z,1520697446.923 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:57:27.319Z,1520697447.319 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:57:27.728Z,1520697447.728 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:57:28.125Z,1520697448.125 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:57:28.525Z,1520697448.525 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:57:28.925Z,1520697448.925 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:57:29.320Z,1520697449.320 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:57:29.720Z,1520697449.720 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:57:30.120Z,1520697450.120 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:57:30.524Z,1520697450.524 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:57:30.916Z,1520697450.916 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:57:31.324Z,1520697451.324 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:57:31.332Z,1520697451.332 [BPC1](FAULT): Failed to initialize
2018-03-10T15:57:31.332Z,1520697451.332 [BPC1] Communications Fault, FailCount= 4
2018-03-10T15:57:31.332Z,1520697451.332 [BPC1](ERROR): Communications Fault
2018-03-10T15:57:31.355Z,1520697451.355 [CBIT](ERROR): Communications Fault in component: BPC1
2018-03-10T15:57:31.724Z,1520697451.724 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:57:32.125Z,1520697452.125 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:57:32.518Z,1520697452.518 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:57:32.571Z,1520697452.571 [CBIT](INFO): Clearing failed state for component BPC1
2018-03-10T15:57:32.571Z,1520697452.571 [BPC1] No Fault, FailCount= 4
2018-03-10T15:57:32.916Z,1520697452.916 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:57:33.312Z,1520697453.312 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:57:33.717Z,1520697453.717 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:57:34.112Z,1520697454.112 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:57:34.517Z,1520697454.517 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:57:34.917Z,1520697454.917 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:57:35.313Z,1520697455.313 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:57:35.714Z,1520697455.714 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:57:36.121Z,1520697456.121 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:57:36.531Z,1520697456.531 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:57:36.896Z,1520697456.896 [NAL9602](INFO): NAL9602 initialized
2018-03-10T15:57:36.913Z,1520697456.913 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:57:37.320Z,1520697457.320 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:57:37.736Z,1520697457.736 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:57:38.141Z,1520697458.141 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:57:38.549Z,1520697458.549 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:57:38.917Z,1520697458.917 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:57:39.313Z,1520697459.313 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:57:39.737Z,1520697459.737 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:57:40.117Z,1520697460.117 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:57:40.521Z,1520697460.521 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:57:40.916Z,1520697460.916 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:57:41.320Z,1520697461.320 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:57:41.714Z,1520697461.714 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:57:42.116Z,1520697462.116 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:57:42.524Z,1520697462.524 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:57:42.916Z,1520697462.916 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:57:43.326Z,1520697463.326 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:57:43.721Z,1520697463.721 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:57:44.120Z,1520697464.120 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:57:44.531Z,1520697464.531 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:57:44.934Z,1520697464.934 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:57:45.326Z,1520697465.326 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:57:45.734Z,1520697465.734 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:57:46.126Z,1520697466.126 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:57:46.528Z,1520697466.528 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:57:46.925Z,1520697466.925 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:57:47.326Z,1520697467.326 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:57:47.710Z,1520697467.710 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:57:48.128Z,1520697468.128 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:57:48.516Z,1520697468.516 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:57:48.913Z,1520697468.913 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:57:49.317Z,1520697469.317 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:57:49.730Z,1520697469.730 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:57:50.128Z,1520697470.128 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:57:50.516Z,1520697470.516 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:57:50.916Z,1520697470.916 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:57:51.313Z,1520697471.313 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:57:51.736Z,1520697471.736 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:57:52.139Z,1520697472.139 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:57:52.517Z,1520697472.517 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:57:52.916Z,1520697472.916 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:57:53.316Z,1520697473.316 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:57:53.714Z,1520697473.714 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:57:54.116Z,1520697474.116 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:57:54.516Z,1520697474.516 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:57:54.914Z,1520697474.914 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:57:55.320Z,1520697475.320 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:57:55.716Z,1520697475.716 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:57:56.114Z,1520697476.114 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:57:56.517Z,1520697476.517 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:57:56.918Z,1520697476.918 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:57:57.317Z,1520697477.317 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:57:57.717Z,1520697477.717 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:57:58.117Z,1520697478.117 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:57:58.513Z,1520697478.513 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:57:58.938Z,1520697478.938 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:57:59.321Z,1520697479.321 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:57:59.717Z,1520697479.717 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:58:00.116Z,1520697480.116 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:58:00.517Z,1520697480.517 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:58:00.917Z,1520697480.917 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:58:01.337Z,1520697481.337 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:58:01.717Z,1520697481.717 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:58:02.118Z,1520697482.118 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:58:02.524Z,1520697482.524 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:58:02.925Z,1520697482.925 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:58:03.322Z,1520697483.322 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:58:03.731Z,1520697483.731 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:58:04.133Z,1520697484.133 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:58:04.525Z,1520697484.525 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:58:04.933Z,1520697484.933 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:58:05.321Z,1520697485.321 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:58:05.716Z,1520697485.716 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:58:06.124Z,1520697486.124 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:58:06.526Z,1520697486.526 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:58:06.925Z,1520697486.925 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:58:07.327Z,1520697487.327 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:58:07.724Z,1520697487.724 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:58:08.116Z,1520697488.116 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:58:08.527Z,1520697488.527 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:58:08.904Z,1520697488.904 [NAL9602](ERROR): Failed to receive proper response when querying signal strength for MT queue check.
2018-03-10T15:58:08.983Z,1520697488.983 [NAL9602](FAULT): received: 
+CSQ:0

OK35, 0, 0, 0, 0

OK
2018-03-10T15:58:08.983Z,1520697488.983 [NAL9602] Data Fault, FailCount= 1
2018-03-10T15:58:08.983Z,1520697488.983 [NAL9602](ERROR): Data Fault
2018-03-10T15:58:09.000Z,1520697489.000 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:58:09.073Z,1520697489.073 [CBIT](ERROR): Data Fault in component: NAL9602
2018-03-10T15:58:09.300Z,1520697489.300 [NAL9602](INFO): Powering down
2018-03-10T15:58:09.317Z,1520697489.317 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:58:09.728Z,1520697489.728 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:58:10.116Z,1520697490.116 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:58:10.159Z,1520697490.159 [CBIT](INFO): Clearing failed state for component NAL9602
2018-03-10T15:58:10.159Z,1520697490.159 [NAL9602] No Fault, FailCount= 1
2018-03-10T15:58:10.517Z,1520697490.517 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:58:10.936Z,1520697490.936 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:58:10.954Z,1520697490.954 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T15:58:10.954Z,1520697490.954 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 136
2018-03-10T15:58:10.954Z,1520697490.954 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-10T15:58:10.967Z,1520697490.967 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-10T15:58:11.316Z,1520697491.316 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:58:11.358Z,1520697491.358 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-10T15:58:11.358Z,1520697491.358 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 136
2018-03-10T15:58:11.736Z,1520697491.736 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:58:11.754Z,1520697491.754 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-10T15:58:11.754Z,1520697491.754 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-10T15:58:11.755Z,1520697491.755 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-10T15:58:12.116Z,1520697492.116 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:58:12.516Z,1520697492.516 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:58:12.920Z,1520697492.920 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:58:13.317Z,1520697493.317 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:58:13.720Z,1520697493.720 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:58:14.120Z,1520697494.120 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:58:14.523Z,1520697494.523 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:58:14.917Z,1520697494.917 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:58:15.322Z,1520697495.322 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:58:15.722Z,1520697495.722 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:58:16.126Z,1520697496.126 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:58:16.524Z,1520697496.524 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:58:16.925Z,1520697496.925 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:58:17.320Z,1520697497.320 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:58:17.720Z,1520697497.720 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:58:18.133Z,1520697498.133 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:58:18.528Z,1520697498.528 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:58:18.924Z,1520697498.924 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:58:19.324Z,1520697499.324 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:58:19.720Z,1520697499.720 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:58:20.120Z,1520697500.120 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:58:20.519Z,1520697500.519 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:58:20.912Z,1520697500.912 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:58:21.324Z,1520697501.324 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:58:21.724Z,1520697501.724 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:58:22.128Z,1520697502.128 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:58:22.512Z,1520697502.512 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:58:22.944Z,1520697502.944 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:58:26.177Z,1520697506.177 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:58:26.325Z,1520697506.325 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:58:26.699Z,1520697506.699 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:58:27.098Z,1520697507.098 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:58:27.498Z,1520697507.498 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:58:27.897Z,1520697507.897 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:58:28.294Z,1520697508.294 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:58:28.700Z,1520697508.700 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:58:29.097Z,1520697509.097 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:58:29.489Z,1520697509.489 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:58:29.889Z,1520697509.889 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:58:30.289Z,1520697510.289 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:58:30.689Z,1520697510.689 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:58:31.089Z,1520697511.089 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:58:31.489Z,1520697511.489 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:58:31.885Z,1520697511.885 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:58:32.292Z,1520697512.292 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:58:32.692Z,1520697512.692 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:58:33.093Z,1520697513.093 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:58:33.493Z,1520697513.493 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:58:33.896Z,1520697513.896 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:58:34.293Z,1520697514.293 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:58:34.697Z,1520697514.697 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:58:35.092Z,1520697515.092 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:58:35.496Z,1520697515.496 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:58:35.896Z,1520697515.896 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:58:36.295Z,1520697516.295 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:58:36.688Z,1520697516.688 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:58:37.088Z,1520697517.088 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:58:37.488Z,1520697517.488 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:58:37.892Z,1520697517.892 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:58:38.288Z,1520697518.288 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:58:38.696Z,1520697518.696 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:58:39.093Z,1520697519.093 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:58:39.472Z,1520697519.472 [NAL9602](INFO): Powering up NAL9602
2018-03-10T15:58:39.489Z,1520697519.489 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:58:39.900Z,1520697519.900 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:58:40.297Z,1520697520.297 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:58:40.697Z,1520697520.697 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:58:41.098Z,1520697521.098 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:58:41.499Z,1520697521.499 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:58:41.900Z,1520697521.900 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:58:42.300Z,1520697522.300 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:58:42.700Z,1520697522.700 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:58:43.100Z,1520697523.100 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:58:43.496Z,1520697523.496 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:58:43.886Z,1520697523.886 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:58:44.288Z,1520697524.288 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:58:44.688Z,1520697524.688 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:58:45.092Z,1520697525.092 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:58:45.492Z,1520697525.492 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:58:45.889Z,1520697525.889 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:58:46.292Z,1520697526.292 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:58:46.697Z,1520697526.697 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:58:47.096Z,1520697527.096 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:58:47.493Z,1520697527.493 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:58:47.901Z,1520697527.901 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:58:48.288Z,1520697528.288 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:58:48.688Z,1520697528.688 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:58:49.088Z,1520697529.088 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:58:49.487Z,1520697529.487 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:58:49.892Z,1520697529.892 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:58:50.310Z,1520697530.310 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:58:50.677Z,1520697530.677 [NAL9602](INFO): NAL9602 initialized
2018-03-10T15:58:50.694Z,1520697530.694 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:58:51.088Z,1520697531.088 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:58:51.539Z,1520697531.539 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:58:51.938Z,1520697531.938 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:58:52.299Z,1520697532.299 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:58:52.694Z,1520697532.694 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:58:53.092Z,1520697533.092 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:58:53.489Z,1520697533.489 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:58:53.925Z,1520697533.925 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:58:54.331Z,1520697534.331 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:58:54.721Z,1520697534.721 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:58:55.095Z,1520697535.095 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:58:55.501Z,1520697535.501 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:58:55.896Z,1520697535.896 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:58:56.301Z,1520697536.301 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:58:56.689Z,1520697536.689 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:58:57.102Z,1520697537.102 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:58:57.490Z,1520697537.490 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:58:57.889Z,1520697537.889 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:58:58.302Z,1520697538.302 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:58:58.720Z,1520697538.720 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:58:59.124Z,1520697539.124 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:58:59.531Z,1520697539.531 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:58:59.904Z,1520697539.904 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:59:00.297Z,1520697540.297 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:59:00.693Z,1520697540.693 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:59:01.092Z,1520697541.092 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:59:01.500Z,1520697541.500 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:59:01.898Z,1520697541.898 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:59:02.296Z,1520697542.296 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:59:02.696Z,1520697542.696 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:59:03.097Z,1520697543.097 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:59:03.497Z,1520697543.497 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:59:03.906Z,1520697543.906 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:59:04.312Z,1520697544.312 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:59:04.714Z,1520697544.714 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:59:05.117Z,1520697545.117 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:59:05.488Z,1520697545.488 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:59:05.889Z,1520697545.889 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:59:06.288Z,1520697546.288 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:59:06.693Z,1520697546.693 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:59:07.090Z,1520697547.090 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:59:07.493Z,1520697547.493 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:59:07.897Z,1520697547.897 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:59:08.297Z,1520697548.297 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:59:08.699Z,1520697548.699 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:59:09.138Z,1520697549.138 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:59:09.518Z,1520697549.518 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:59:09.919Z,1520697549.919 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:59:10.316Z,1520697550.316 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:59:10.689Z,1520697550.689 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:59:11.096Z,1520697551.096 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:59:11.497Z,1520697551.497 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:59:11.889Z,1520697551.889 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:59:12.294Z,1520697552.294 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:59:12.696Z,1520697552.696 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:59:13.097Z,1520697553.097 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:59:13.493Z,1520697553.493 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:59:13.896Z,1520697553.896 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:59:14.302Z,1520697554.302 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:59:14.724Z,1520697554.724 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:59:15.103Z,1520697555.103 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:59:15.502Z,1520697555.502 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:59:15.893Z,1520697555.893 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:59:16.288Z,1520697556.288 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:59:16.689Z,1520697556.689 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:59:17.092Z,1520697557.092 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:59:17.489Z,1520697557.489 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:59:17.892Z,1520697557.892 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:59:18.292Z,1520697558.292 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:59:18.689Z,1520697558.689 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:59:19.092Z,1520697559.092 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:59:19.500Z,1520697559.500 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:59:19.952Z,1520697559.952 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:59:20.304Z,1520697560.304 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:59:20.699Z,1520697560.699 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:59:21.093Z,1520697561.093 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:59:21.498Z,1520697561.498 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:59:21.900Z,1520697561.900 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:59:22.298Z,1520697562.298 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:59:22.700Z,1520697562.700 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:59:23.100Z,1520697563.100 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:59:26.264Z,1520697566.264 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:59:26.396Z,1520697566.396 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:59:26.787Z,1520697566.787 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:59:27.189Z,1520697567.189 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:59:27.581Z,1520697567.581 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:59:27.976Z,1520697567.976 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:59:28.373Z,1520697568.373 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:59:28.773Z,1520697568.773 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:59:29.181Z,1520697569.181 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:59:29.584Z,1520697569.584 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:59:29.977Z,1520697569.977 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:59:30.374Z,1520697570.374 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:59:30.780Z,1520697570.780 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:59:31.191Z,1520697571.191 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:59:31.584Z,1520697571.584 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:59:31.984Z,1520697571.984 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:59:32.382Z,1520697572.382 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:59:32.779Z,1520697572.779 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:59:33.172Z,1520697573.172 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:59:33.565Z,1520697573.565 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:59:33.969Z,1520697573.969 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:59:34.366Z,1520697574.366 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:59:34.762Z,1520697574.762 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:59:35.169Z,1520697575.169 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:59:35.569Z,1520697575.569 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:59:35.984Z,1520697575.984 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:59:36.387Z,1520697576.387 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:59:36.796Z,1520697576.796 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:59:37.197Z,1520697577.197 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:59:37.589Z,1520697577.589 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:59:37.969Z,1520697577.969 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:59:38.373Z,1520697578.373 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:59:38.769Z,1520697578.769 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:59:39.166Z,1520697579.166 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:59:39.573Z,1520697579.573 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:59:39.973Z,1520697579.973 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:59:40.369Z,1520697580.369 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:59:40.772Z,1520697580.772 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:59:41.169Z,1520697581.169 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:59:41.584Z,1520697581.584 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:59:41.995Z,1520697581.995 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:59:42.382Z,1520697582.382 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:59:42.801Z,1520697582.801 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:59:43.177Z,1520697583.177 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:59:43.578Z,1520697583.578 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:59:43.977Z,1520697583.977 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:59:44.373Z,1520697584.373 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:59:44.777Z,1520697584.777 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:59:45.170Z,1520697585.170 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:59:45.569Z,1520697585.569 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:59:45.970Z,1520697585.970 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:59:46.381Z,1520697586.381 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:59:46.785Z,1520697586.785 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:59:47.191Z,1520697587.191 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:59:47.592Z,1520697587.592 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:59:47.989Z,1520697587.989 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:59:48.369Z,1520697588.369 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:59:48.768Z,1520697588.768 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:59:49.169Z,1520697589.169 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:59:49.569Z,1520697589.569 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:59:49.973Z,1520697589.973 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:59:50.375Z,1520697590.375 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:59:50.769Z,1520697590.769 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:59:51.169Z,1520697591.169 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:59:51.578Z,1520697591.578 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:59:51.984Z,1520697591.984 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:59:52.379Z,1520697592.379 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:59:52.780Z,1520697592.780 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:59:53.189Z,1520697593.189 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:59:53.574Z,1520697593.574 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:59:53.979Z,1520697593.979 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:59:54.374Z,1520697594.374 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:59:54.780Z,1520697594.780 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:59:55.177Z,1520697595.177 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:59:55.578Z,1520697595.578 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:59:55.965Z,1520697595.965 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:59:56.382Z,1520697596.382 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:59:56.780Z,1520697596.780 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:59:57.191Z,1520697597.191 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:59:57.585Z,1520697597.585 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:59:57.988Z,1520697597.988 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:59:58.385Z,1520697598.385 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:59:58.780Z,1520697598.780 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:59:59.169Z,1520697599.169 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:59:59.573Z,1520697599.573 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T15:59:59.968Z,1520697599.968 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:00:00.369Z,1520697600.369 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:00:00.767Z,1520697600.767 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:00:01.173Z,1520697601.173 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:00:01.571Z,1520697601.571 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:00:01.973Z,1520697601.973 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:00:02.395Z,1520697602.395 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:00:02.793Z,1520697602.793 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:00:03.191Z,1520697603.191 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:00:03.579Z,1520697603.579 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:00:03.973Z,1520697603.973 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:00:04.369Z,1520697604.369 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:00:04.771Z,1520697604.771 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:00:05.169Z,1520697605.169 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:00:05.569Z,1520697605.569 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:00:05.973Z,1520697605.973 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:00:06.376Z,1520697606.376 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:00:06.781Z,1520697606.781 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:00:07.181Z,1520697607.181 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:00:07.588Z,1520697607.588 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:00:07.991Z,1520697607.991 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:00:08.383Z,1520697608.383 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:00:08.789Z,1520697608.789 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:00:09.183Z,1520697609.183 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:00:09.578Z,1520697609.578 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:00:09.977Z,1520697609.977 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:00:10.376Z,1520697610.376 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:00:10.774Z,1520697610.774 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:00:11.180Z,1520697611.180 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:00:11.573Z,1520697611.573 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:00:11.976Z,1520697611.976 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:00:12.377Z,1520697612.377 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:00:12.799Z,1520697612.799 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:00:13.182Z,1520697613.182 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:00:13.583Z,1520697613.583 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:00:13.991Z,1520697613.991 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:00:14.380Z,1520697614.380 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:00:14.776Z,1520697614.776 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:00:15.179Z,1520697615.179 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:00:15.572Z,1520697615.572 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:00:15.970Z,1520697615.970 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:00:16.386Z,1520697616.386 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:00:16.769Z,1520697616.769 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:00:17.185Z,1520697617.185 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:00:17.584Z,1520697617.584 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:00:17.993Z,1520697617.993 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:00:18.391Z,1520697618.391 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:00:18.789Z,1520697618.789 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:00:19.194Z,1520697619.194 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:00:19.569Z,1520697619.569 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:00:19.969Z,1520697619.969 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:00:20.376Z,1520697620.376 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:00:20.783Z,1520697620.783 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:00:21.181Z,1520697621.181 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:00:21.574Z,1520697621.574 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:00:21.980Z,1520697621.980 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:00:22.379Z,1520697622.379 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:00:22.774Z,1520697622.774 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:00:23.200Z,1520697623.200 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:00:26.363Z,1520697626.363 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:00:26.514Z,1520697626.514 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:00:26.896Z,1520697626.896 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:00:27.286Z,1520697627.286 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:00:27.678Z,1520697627.678 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:00:28.082Z,1520697628.082 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:00:28.483Z,1520697628.483 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:00:28.876Z,1520697628.876 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:00:29.281Z,1520697629.281 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:00:29.685Z,1520697629.685 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:00:30.085Z,1520697630.085 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:00:30.476Z,1520697630.476 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:00:30.899Z,1520697630.899 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:00:31.284Z,1520697631.284 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:00:31.697Z,1520697631.697 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:00:32.092Z,1520697632.092 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:00:32.477Z,1520697632.477 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:00:32.873Z,1520697632.873 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:00:33.281Z,1520697633.281 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:00:33.669Z,1520697633.669 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:00:34.073Z,1520697634.073 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:00:34.486Z,1520697634.486 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:00:34.873Z,1520697634.873 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:00:35.281Z,1520697635.281 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:00:35.681Z,1520697635.681 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:00:36.095Z,1520697636.095 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:00:36.484Z,1520697636.484 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:00:36.891Z,1520697636.891 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:00:37.288Z,1520697637.288 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:00:37.680Z,1520697637.680 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:00:38.080Z,1520697638.080 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:00:38.472Z,1520697638.472 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:00:38.880Z,1520697638.880 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:00:39.280Z,1520697639.280 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:00:39.681Z,1520697639.681 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:00:40.081Z,1520697640.081 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:00:40.476Z,1520697640.476 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:00:40.893Z,1520697640.893 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:00:41.297Z,1520697641.297 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:00:41.696Z,1520697641.696 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:00:42.089Z,1520697642.089 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:00:42.497Z,1520697642.497 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:00:42.887Z,1520697642.887 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:00:43.269Z,1520697643.269 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:00:43.671Z,1520697643.671 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:00:44.073Z,1520697644.073 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:00:44.469Z,1520697644.469 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:00:44.872Z,1520697644.872 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:00:45.273Z,1520697645.273 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:00:45.681Z,1520697645.681 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:00:46.090Z,1520697646.090 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:00:46.479Z,1520697646.479 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:00:46.896Z,1520697646.896 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:00:47.303Z,1520697647.303 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:00:47.688Z,1520697647.688 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:00:48.076Z,1520697648.076 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:00:48.493Z,1520697648.493 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:00:48.886Z,1520697648.886 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:00:49.284Z,1520697649.284 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:00:49.676Z,1520697649.676 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:00:50.072Z,1520697650.072 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:00:50.469Z,1520697650.469 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:00:50.873Z,1520697650.873 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:00:51.272Z,1520697651.272 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:00:51.696Z,1520697651.696 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:00:52.092Z,1520697652.092 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:00:52.483Z,1520697652.483 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:00:52.892Z,1520697652.892 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:00:53.272Z,1520697653.272 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:00:53.672Z,1520697653.672 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:00:54.085Z,1520697654.085 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:00:54.473Z,1520697654.473 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:00:54.876Z,1520697654.876 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:00:55.274Z,1520697655.274 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:00:55.681Z,1520697655.681 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:00:56.077Z,1520697656.077 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:00:56.477Z,1520697656.477 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:00:56.895Z,1520697656.895 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:00:57.283Z,1520697657.283 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:00:57.684Z,1520697657.684 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:00:58.086Z,1520697658.086 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:00:58.486Z,1520697658.486 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:00:58.880Z,1520697658.880 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:00:59.280Z,1520697659.280 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:00:59.681Z,1520697659.681 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:01:00.080Z,1520697660.080 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:01:00.486Z,1520697660.486 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:01:00.881Z,1520697660.881 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:01:01.280Z,1520697661.280 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:01:01.685Z,1520697661.685 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:01:02.091Z,1520697662.091 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:01:02.492Z,1520697662.492 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:01:02.895Z,1520697662.895 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:01:03.292Z,1520697663.292 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:01:03.685Z,1520697663.685 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:01:04.076Z,1520697664.076 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:01:04.469Z,1520697664.469 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:01:04.884Z,1520697664.884 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:01:05.298Z,1520697665.298 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:01:05.673Z,1520697665.673 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:01:06.077Z,1520697666.077 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:01:06.472Z,1520697666.472 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:01:06.872Z,1520697666.872 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:01:07.289Z,1520697667.289 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:01:07.692Z,1520697667.692 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:01:08.083Z,1520697668.083 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:01:08.483Z,1520697668.483 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:01:08.876Z,1520697668.876 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:01:09.273Z,1520697669.273 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:01:09.677Z,1520697669.677 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:01:10.072Z,1520697670.072 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:01:10.476Z,1520697670.476 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:01:10.877Z,1520697670.877 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:01:11.281Z,1520697671.281 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:01:11.688Z,1520697671.688 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:01:12.085Z,1520697672.085 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:01:12.129Z,1520697672.129 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T16:01:12.129Z,1520697672.129 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 137
2018-03-10T16:01:12.129Z,1520697672.129 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-10T16:01:12.150Z,1520697672.150 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-10T16:01:12.494Z,1520697672.494 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:01:12.547Z,1520697672.547 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-10T16:01:12.547Z,1520697672.547 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 137
2018-03-10T16:01:12.895Z,1520697672.895 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:01:12.929Z,1520697672.929 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-10T16:01:12.929Z,1520697672.929 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-10T16:01:12.929Z,1520697672.929 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-10T16:01:13.283Z,1520697673.283 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:01:13.686Z,1520697673.686 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:01:14.082Z,1520697674.082 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:01:14.484Z,1520697674.484 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:01:14.879Z,1520697674.879 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:01:15.281Z,1520697675.281 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:01:15.685Z,1520697675.685 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:01:16.081Z,1520697676.081 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:01:16.482Z,1520697676.482 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:01:16.889Z,1520697676.889 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:01:17.276Z,1520697677.276 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:01:17.697Z,1520697677.697 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:01:18.092Z,1520697678.092 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:01:18.492Z,1520697678.492 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:01:18.895Z,1520697678.895 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:01:19.273Z,1520697679.273 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:01:19.673Z,1520697679.673 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:01:20.073Z,1520697680.073 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:01:20.473Z,1520697680.473 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:01:20.873Z,1520697680.873 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:01:21.277Z,1520697681.277 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:01:21.677Z,1520697681.677 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:01:22.072Z,1520697682.072 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:01:22.468Z,1520697682.468 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:01:22.895Z,1520697682.895 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:01:23.291Z,1520697683.291 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:01:26.593Z,1520697686.593 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:01:26.749Z,1520697686.749 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:01:27.064Z,1520697687.064 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:01:27.462Z,1520697687.462 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:01:27.883Z,1520697687.883 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:01:28.279Z,1520697688.279 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:01:28.675Z,1520697688.675 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:01:29.074Z,1520697689.074 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:01:29.461Z,1520697689.461 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:01:29.869Z,1520697689.869 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:01:30.258Z,1520697690.258 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:01:30.657Z,1520697690.657 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:01:31.057Z,1520697691.057 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:01:31.465Z,1520697691.465 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:01:31.872Z,1520697691.872 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:01:32.253Z,1520697692.253 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:01:32.657Z,1520697692.657 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:01:33.070Z,1520697693.070 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:01:33.475Z,1520697693.475 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:01:33.871Z,1520697693.871 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:01:34.281Z,1520697694.281 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:01:34.663Z,1520697694.663 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:01:35.062Z,1520697695.062 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:01:35.462Z,1520697695.462 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:01:35.869Z,1520697695.869 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:01:36.259Z,1520697696.259 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:01:36.660Z,1520697696.660 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:01:37.072Z,1520697697.072 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:01:37.468Z,1520697697.468 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:01:37.871Z,1520697697.871 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:01:38.272Z,1520697698.272 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:01:38.674Z,1520697698.674 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:01:39.084Z,1520697699.084 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:01:39.480Z,1520697699.480 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:01:39.865Z,1520697699.865 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:01:40.256Z,1520697700.256 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:01:40.658Z,1520697700.658 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:01:41.065Z,1520697701.065 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:01:41.464Z,1520697701.464 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:01:41.866Z,1520697701.866 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:01:42.265Z,1520697702.265 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:01:42.676Z,1520697702.676 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:01:43.057Z,1520697703.057 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:01:43.464Z,1520697703.464 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:01:43.886Z,1520697703.886 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:01:44.275Z,1520697704.275 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:01:44.675Z,1520697704.675 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:01:45.062Z,1520697705.062 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:01:45.458Z,1520697705.458 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:01:45.862Z,1520697705.862 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:01:46.274Z,1520697706.274 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:01:46.668Z,1520697706.668 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:01:47.065Z,1520697707.065 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:01:47.477Z,1520697707.477 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:01:47.867Z,1520697707.867 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:01:48.267Z,1520697708.267 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:01:48.678Z,1520697708.678 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:01:49.076Z,1520697709.076 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:01:49.479Z,1520697709.479 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:01:49.867Z,1520697709.867 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:01:50.257Z,1520697710.257 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:01:50.659Z,1520697710.659 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:01:51.067Z,1520697711.067 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:01:51.473Z,1520697711.473 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:01:51.864Z,1520697711.864 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:01:52.273Z,1520697712.273 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:01:52.666Z,1520697712.666 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:01:53.056Z,1520697713.056 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:01:53.463Z,1520697713.463 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:01:53.876Z,1520697713.876 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:01:54.276Z,1520697714.276 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:01:54.681Z,1520697714.681 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:01:55.084Z,1520697715.084 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:01:55.457Z,1520697715.457 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:01:55.864Z,1520697715.864 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:01:56.265Z,1520697716.265 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:01:56.665Z,1520697716.665 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:01:57.066Z,1520697717.066 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:01:57.465Z,1520697717.465 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:01:57.869Z,1520697717.869 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:01:58.260Z,1520697718.260 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:01:58.656Z,1520697718.656 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:01:59.066Z,1520697719.066 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:01:59.475Z,1520697719.475 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:01:59.880Z,1520697719.880 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:02:00.275Z,1520697720.275 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:02:00.657Z,1520697720.657 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:02:01.058Z,1520697721.058 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:02:01.461Z,1520697721.461 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:02:01.861Z,1520697721.861 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:02:02.257Z,1520697722.257 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:02:02.660Z,1520697722.660 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:02:03.056Z,1520697723.056 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:02:03.458Z,1520697723.458 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:02:03.857Z,1520697723.857 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:02:04.300Z,1520697724.300 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:02:04.675Z,1520697724.675 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:02:05.076Z,1520697725.076 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:02:05.475Z,1520697725.475 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:02:05.862Z,1520697725.862 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:02:06.265Z,1520697726.265 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:02:06.668Z,1520697726.668 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:02:07.062Z,1520697727.062 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:02:07.466Z,1520697727.466 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:02:07.860Z,1520697727.860 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:02:08.253Z,1520697728.253 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:02:08.660Z,1520697728.660 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:02:09.067Z,1520697729.067 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:02:09.491Z,1520697729.491 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:02:09.876Z,1520697729.876 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:02:10.285Z,1520697730.285 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:02:10.681Z,1520697730.681 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:02:11.057Z,1520697731.057 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:02:11.462Z,1520697731.462 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:02:11.862Z,1520697731.862 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:02:12.262Z,1520697732.262 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:02:12.666Z,1520697732.666 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:02:13.070Z,1520697733.070 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:02:13.471Z,1520697733.471 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:02:13.867Z,1520697733.867 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:02:14.264Z,1520697734.264 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:02:14.680Z,1520697734.680 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:02:15.084Z,1520697735.084 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:02:15.467Z,1520697735.467 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:02:15.880Z,1520697735.880 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:02:16.255Z,1520697736.255 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:02:16.657Z,1520697736.657 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:02:17.065Z,1520697737.065 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:02:17.462Z,1520697737.462 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:02:17.864Z,1520697737.864 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:02:18.269Z,1520697738.269 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:02:18.661Z,1520697738.661 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:02:19.065Z,1520697739.065 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:02:19.458Z,1520697739.458 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:02:19.882Z,1520697739.882 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:02:20.280Z,1520697740.280 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:02:20.675Z,1520697740.675 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:02:21.067Z,1520697741.067 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:02:21.457Z,1520697741.457 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:02:21.861Z,1520697741.861 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:02:22.257Z,1520697742.257 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:02:22.664Z,1520697742.664 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:02:23.058Z,1520697743.058 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:02:23.098Z,1520697743.098 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-03-10T15:57:22.8Z
2018-03-10T16:02:23.098Z,1520697743.098 [Default:CheckIn:Read_GPS] Stopped
2018-03-10T16:02:23.098Z,1520697743.098 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-03-10T16:02:23.468Z,1520697743.468 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:02:26.851Z,1520697746.851 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:02:26.976Z,1520697746.976 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:02:27.299Z,1520697747.299 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20180310T051512/Courier0252.lzma
2018-03-10T16:02:27.359Z,1520697747.359 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:02:27.728Z,1520697747.728 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:02:28.097Z,1520697748.097 [DataOverHttps](INFO): Moved sent file to Logs/20180310T051512/Courier0252.lzma.bak
2018-03-10T16:02:28.098Z,1520697748.098 [DataOverHttps](INFO): SBD MOMSN=8005904
2018-03-10T16:02:28.119Z,1520697748.119 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:02:28.804Z,1520697748.804 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:02:28.924Z,1520697748.924 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:02:29.329Z,1520697749.329 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:02:29.730Z,1520697749.730 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:02:30.125Z,1520697750.125 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:02:30.520Z,1520697750.520 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:02:30.920Z,1520697750.920 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:02:31.317Z,1520697751.317 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:02:34.529Z,1520697754.529 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:02:34.680Z,1520697754.680 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:02:35.066Z,1520697755.066 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:02:35.463Z,1520697755.463 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:02:35.857Z,1520697755.857 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:02:36.258Z,1520697756.258 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:02:36.655Z,1520697756.655 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:02:39.866Z,1520697759.866 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session.
2018-03-10T16:02:39.884Z,1520697759.884 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:02:40.015Z,1520697760.015 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:02:44.725Z,1520697764.725 [DataOverHttps](INFO): Sending 264 bytes from file Logs/20180310T051512/Express0253.lzma
2018-03-10T16:02:44.759Z,1520697764.759 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:02:44.876Z,1520697764.876 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:02:45.259Z,1520697765.259 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:02:45.652Z,1520697765.652 [DataOverHttps](INFO): Moved sent file to Logs/20180310T051512/Express0253.lzma.bak
2018-03-10T16:02:45.653Z,1520697765.653 [DataOverHttps](INFO): SBD MOMSN=8005906
2018-03-10T16:02:45.697Z,1520697765.697 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:02:46.354Z,1520697766.354 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:02:46.378Z,1520697766.378 [Default:CheckIn:Read_Iridium] Stopped
2018-03-10T16:02:46.378Z,1520697766.378 [Default:CheckIn:C.Wait] Running Loop=1
2018-03-10T16:02:46.378Z,1520697766.378 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-03-10T16:02:46.473Z,1520697766.473 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:02:46.863Z,1520697766.863 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:02:50.060Z,1520697770.060 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:02:50.221Z,1520697770.221 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:02:50.582Z,1520697770.582 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:02:50.972Z,1520697770.972 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:02:51.384Z,1520697771.384 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:02:51.782Z,1520697771.782 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:02:52.173Z,1520697772.173 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:02:52.577Z,1520697772.577 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:02:52.981Z,1520697772.981 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:02:53.381Z,1520697773.381 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:02:53.778Z,1520697773.778 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:02:54.176Z,1520697774.176 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:02:54.584Z,1520697774.584 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:02:54.980Z,1520697774.980 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:02:55.380Z,1520697775.380 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:02:55.776Z,1520697775.776 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:02:56.192Z,1520697776.192 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:02:56.573Z,1520697776.573 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:02:56.968Z,1520697776.968 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:02:57.372Z,1520697777.372 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:02:57.772Z,1520697777.772 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:02:58.177Z,1520697778.177 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:02:58.577Z,1520697778.577 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:02:58.978Z,1520697778.978 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:02:59.379Z,1520697779.379 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:02:59.781Z,1520697779.781 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:03:00.181Z,1520697780.181 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:03:00.579Z,1520697780.579 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:03:00.982Z,1520697780.982 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:03:01.381Z,1520697781.381 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:03:01.781Z,1520697781.781 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:03:02.175Z,1520697782.175 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:03:02.578Z,1520697782.578 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:03:02.981Z,1520697782.981 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:03:03.394Z,1520697783.394 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:03:03.772Z,1520697783.772 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:03:04.168Z,1520697784.168 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:03:04.572Z,1520697784.572 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:03:04.984Z,1520697784.984 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:03:05.384Z,1520697785.384 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:03:05.772Z,1520697785.772 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:03:06.184Z,1520697786.184 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:03:06.584Z,1520697786.584 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:03:06.988Z,1520697786.988 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:03:07.385Z,1520697787.385 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:03:07.770Z,1520697787.770 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:03:08.177Z,1520697788.177 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:03:08.577Z,1520697788.577 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:03:08.970Z,1520697788.970 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:03:09.372Z,1520697789.372 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:03:09.772Z,1520697789.772 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:03:10.156Z,1520697790.156 [NAL9602](INFO): Powering down
2018-03-10T16:03:10.174Z,1520697790.174 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:03:10.572Z,1520697790.572 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:03:10.971Z,1520697790.971 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:03:11.372Z,1520697791.372 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:03:11.784Z,1520697791.784 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:03:12.176Z,1520697792.176 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:03:12.572Z,1520697792.572 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:03:12.974Z,1520697792.974 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:03:13.380Z,1520697793.380 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:03:13.781Z,1520697793.781 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:03:14.181Z,1520697794.181 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:03:14.578Z,1520697794.578 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:03:14.976Z,1520697794.976 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:03:15.380Z,1520697795.380 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:03:15.780Z,1520697795.780 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:03:16.184Z,1520697796.184 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:03:16.578Z,1520697796.578 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:03:16.989Z,1520697796.989 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:03:17.382Z,1520697797.382 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:03:17.784Z,1520697797.784 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:03:18.176Z,1520697798.176 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:03:18.584Z,1520697798.584 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:03:18.972Z,1520697798.972 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:03:19.373Z,1520697799.373 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:03:19.769Z,1520697799.769 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:03:20.190Z,1520697800.190 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:03:20.577Z,1520697800.577 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:03:20.977Z,1520697800.977 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:03:21.372Z,1520697801.372 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:03:21.776Z,1520697801.776 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:03:22.172Z,1520697802.172 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:03:22.582Z,1520697802.582 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:03:22.980Z,1520697802.980 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:03:23.379Z,1520697803.379 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:03:23.805Z,1520697803.805 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:03:24.176Z,1520697804.176 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:03:24.581Z,1520697804.581 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:03:24.984Z,1520697804.984 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:03:25.378Z,1520697805.378 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:03:25.772Z,1520697805.772 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:03:26.176Z,1520697806.176 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:03:26.572Z,1520697806.572 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:03:26.968Z,1520697806.968 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:03:27.380Z,1520697807.380 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:03:27.772Z,1520697807.772 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:03:28.168Z,1520697808.168 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:03:28.577Z,1520697808.577 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:03:28.977Z,1520697808.977 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:03:29.381Z,1520697809.381 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:03:29.784Z,1520697809.784 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:03:30.173Z,1520697810.173 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:03:30.575Z,1520697810.575 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:03:30.981Z,1520697810.981 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:03:31.379Z,1520697811.379 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:03:31.781Z,1520697811.781 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:03:32.180Z,1520697812.180 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:03:32.582Z,1520697812.582 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:03:32.983Z,1520697812.983 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:03:33.380Z,1520697813.380 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:03:33.777Z,1520697813.777 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:03:34.181Z,1520697814.181 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:03:34.580Z,1520697814.580 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:03:34.980Z,1520697814.980 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:03:35.383Z,1520697815.383 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:03:35.779Z,1520697815.779 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:03:36.179Z,1520697816.179 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:03:36.579Z,1520697816.579 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:03:36.982Z,1520697816.982 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:03:37.380Z,1520697817.380 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:03:37.784Z,1520697817.784 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:03:38.178Z,1520697818.178 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:03:38.584Z,1520697818.584 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:03:38.976Z,1520697818.976 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:03:39.384Z,1520697819.384 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:03:39.772Z,1520697819.772 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:03:40.175Z,1520697820.175 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:03:40.572Z,1520697820.572 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:03:40.976Z,1520697820.976 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:03:41.392Z,1520697821.392 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:03:41.867Z,1520697821.867 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:03:42.176Z,1520697822.176 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:03:42.572Z,1520697822.572 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:03:42.991Z,1520697822.991 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:03:43.376Z,1520697823.376 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:03:43.777Z,1520697823.777 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:03:44.172Z,1520697824.172 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:03:44.569Z,1520697824.569 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:03:44.973Z,1520697824.973 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:03:45.373Z,1520697825.373 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:03:45.766Z,1520697825.766 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:03:46.173Z,1520697826.173 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:03:46.577Z,1520697826.577 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:03:46.974Z,1520697826.974 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:03:51.761Z,1520697831.761 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:03:51.932Z,1520697831.932 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:03:52.333Z,1520697832.333 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:03:52.700Z,1520697832.700 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:03:53.098Z,1520697833.098 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:03:53.504Z,1520697833.504 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:03:53.905Z,1520697833.905 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:03:54.304Z,1520697834.304 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:03:54.702Z,1520697834.702 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:03:55.096Z,1520697835.096 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:03:55.496Z,1520697835.496 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:03:55.896Z,1520697835.896 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:03:56.295Z,1520697836.295 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:03:56.692Z,1520697836.692 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:03:57.096Z,1520697837.096 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:03:57.509Z,1520697837.509 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:03:57.926Z,1520697837.926 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:03:58.302Z,1520697838.302 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:03:58.717Z,1520697838.717 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:03:59.104Z,1520697839.104 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:03:59.500Z,1520697839.500 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:03:59.900Z,1520697839.900 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:04:00.304Z,1520697840.304 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:04:00.706Z,1520697840.706 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:04:01.111Z,1520697841.111 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:04:01.504Z,1520697841.504 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:04:01.900Z,1520697841.900 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:04:02.292Z,1520697842.292 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:04:02.696Z,1520697842.696 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:04:03.115Z,1520697843.115 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:04:03.497Z,1520697843.497 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:04:03.896Z,1520697843.896 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:04:04.299Z,1520697844.299 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:04:04.700Z,1520697844.700 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:04:05.135Z,1520697845.135 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:04:05.498Z,1520697845.498 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:04:05.904Z,1520697845.904 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:04:06.306Z,1520697846.306 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:04:06.704Z,1520697846.704 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:04:07.097Z,1520697847.097 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:04:07.498Z,1520697847.498 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:04:07.894Z,1520697847.894 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:04:08.298Z,1520697848.298 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:04:08.700Z,1520697848.700 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:04:09.096Z,1520697849.096 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:04:09.494Z,1520697849.494 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:04:09.896Z,1520697849.896 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:04:10.297Z,1520697850.297 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:04:10.704Z,1520697850.704 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:04:11.101Z,1520697851.101 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:04:11.499Z,1520697851.499 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:04:11.900Z,1520697851.900 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:04:12.329Z,1520697852.329 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:04:12.709Z,1520697852.709 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:04:13.105Z,1520697853.105 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:04:13.140Z,1520697853.140 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T16:04:13.141Z,1520697853.141 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 138
2018-03-10T16:04:13.141Z,1520697853.141 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-10T16:04:13.174Z,1520697853.174 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-10T16:04:13.496Z,1520697853.496 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:04:13.565Z,1520697853.565 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-10T16:04:13.565Z,1520697853.565 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 138
2018-03-10T16:04:13.901Z,1520697853.901 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:04:13.943Z,1520697853.943 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-10T16:04:13.944Z,1520697853.944 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-10T16:04:13.944Z,1520697853.944 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-10T16:04:14.304Z,1520697854.304 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:04:14.702Z,1520697854.702 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:04:15.104Z,1520697855.104 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:04:15.501Z,1520697855.501 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:04:15.894Z,1520697855.894 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:04:16.299Z,1520697856.299 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:04:16.701Z,1520697856.701 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:04:17.104Z,1520697857.104 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:04:17.491Z,1520697857.491 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:04:17.900Z,1520697857.900 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:04:18.292Z,1520697858.292 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:04:18.704Z,1520697858.704 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:04:19.100Z,1520697859.100 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:04:19.501Z,1520697859.501 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:04:19.893Z,1520697859.893 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:04:20.292Z,1520697860.292 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:04:20.700Z,1520697860.700 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:04:21.100Z,1520697861.100 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:04:21.500Z,1520697861.500 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:04:21.897Z,1520697861.897 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:04:22.292Z,1520697862.292 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:04:22.692Z,1520697862.692 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:04:23.096Z,1520697863.096 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:04:23.492Z,1520697863.492 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:04:23.901Z,1520697863.901 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:04:24.300Z,1520697864.300 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:04:24.723Z,1520697864.723 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:04:25.132Z,1520697865.132 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:04:25.505Z,1520697865.505 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:04:25.921Z,1520697865.921 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:04:26.297Z,1520697866.297 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:04:26.698Z,1520697866.698 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:04:27.093Z,1520697867.093 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:04:27.497Z,1520697867.497 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:04:27.897Z,1520697867.897 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:04:28.291Z,1520697868.291 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:04:28.695Z,1520697868.695 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:04:29.096Z,1520697869.096 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:04:29.496Z,1520697869.496 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:04:29.902Z,1520697869.902 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:04:30.304Z,1520697870.304 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:04:30.700Z,1520697870.700 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:04:31.106Z,1520697871.106 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:04:31.504Z,1520697871.504 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:04:31.900Z,1520697871.900 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:04:32.300Z,1520697872.300 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:04:32.709Z,1520697872.709 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:04:33.121Z,1520697873.121 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:04:33.532Z,1520697873.532 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:04:33.896Z,1520697873.896 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:04:34.290Z,1520697874.290 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:04:34.700Z,1520697874.700 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:04:35.096Z,1520697875.096 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:04:35.505Z,1520697875.505 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:04:35.906Z,1520697875.906 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:04:36.306Z,1520697876.306 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:04:36.700Z,1520697876.700 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:04:37.100Z,1520697877.100 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:04:37.536Z,1520697877.536 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:04:37.900Z,1520697877.900 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:04:38.314Z,1520697878.314 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:04:38.696Z,1520697878.696 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:04:39.100Z,1520697879.100 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:04:39.497Z,1520697879.497 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:04:39.896Z,1520697879.896 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:04:40.296Z,1520697880.296 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:04:40.704Z,1520697880.704 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:04:41.119Z,1520697881.119 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:04:41.505Z,1520697881.505 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:04:41.902Z,1520697881.902 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:04:42.302Z,1520697882.302 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:04:42.704Z,1520697882.704 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:04:43.104Z,1520697883.104 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:04:43.504Z,1520697883.504 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:04:43.906Z,1520697883.906 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:04:44.311Z,1520697884.311 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:04:44.705Z,1520697884.705 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:04:45.096Z,1520697885.096 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:04:45.497Z,1520697885.497 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:04:45.902Z,1520697885.902 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:04:46.302Z,1520697886.302 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:04:46.698Z,1520697886.698 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:04:47.110Z,1520697887.110 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:04:50.279Z,1520697890.279 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:04:50.414Z,1520697890.414 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:04:50.767Z,1520697890.767 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:04:51.169Z,1520697891.169 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:04:51.570Z,1520697891.570 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:04:51.967Z,1520697891.967 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:04:52.366Z,1520697892.366 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:04:52.768Z,1520697892.768 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:04:53.167Z,1520697893.167 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:04:53.572Z,1520697893.572 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:04:53.976Z,1520697893.976 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:04:54.364Z,1520697894.364 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:04:54.761Z,1520697894.761 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:04:55.165Z,1520697895.165 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:04:55.560Z,1520697895.560 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:04:55.956Z,1520697895.956 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:04:56.360Z,1520697896.360 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:04:56.776Z,1520697896.776 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:04:57.156Z,1520697897.156 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:04:57.556Z,1520697897.556 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:04:57.960Z,1520697897.960 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:04:58.356Z,1520697898.356 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:04:58.785Z,1520697898.785 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:04:59.160Z,1520697899.160 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:04:59.560Z,1520697899.560 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:04:59.958Z,1520697899.958 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:05:00.364Z,1520697900.364 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:05:00.766Z,1520697900.766 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:05:01.172Z,1520697901.172 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:05:01.567Z,1520697901.567 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:05:01.965Z,1520697901.965 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:05:02.370Z,1520697902.370 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:05:02.769Z,1520697902.769 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:05:03.168Z,1520697903.168 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:05:03.570Z,1520697903.570 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:05:03.969Z,1520697903.969 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:05:04.368Z,1520697904.368 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:05:04.772Z,1520697904.772 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:05:05.169Z,1520697905.169 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:05:05.576Z,1520697905.576 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:05:05.956Z,1520697905.956 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:05:06.369Z,1520697906.369 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:05:06.756Z,1520697906.756 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:05:07.167Z,1520697907.167 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:05:07.569Z,1520697907.569 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:05:07.968Z,1520697907.968 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:05:08.366Z,1520697908.366 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:05:08.772Z,1520697908.772 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:05:09.166Z,1520697909.166 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:05:09.573Z,1520697909.573 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:05:09.965Z,1520697909.965 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:05:10.377Z,1520697910.377 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:05:10.756Z,1520697910.756 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:05:11.161Z,1520697911.161 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:05:11.556Z,1520697911.556 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:05:11.956Z,1520697911.956 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:05:12.360Z,1520697912.360 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:05:12.780Z,1520697912.780 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:05:13.166Z,1520697913.166 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:05:13.560Z,1520697913.560 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:05:13.966Z,1520697913.966 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:05:14.365Z,1520697914.365 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:05:14.773Z,1520697914.773 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:05:15.166Z,1520697915.166 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:05:15.568Z,1520697915.568 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:05:15.966Z,1520697915.966 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:05:16.369Z,1520697916.369 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:05:16.767Z,1520697916.767 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:05:17.169Z,1520697917.169 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:05:17.564Z,1520697917.564 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:05:17.973Z,1520697917.973 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:05:18.375Z,1520697918.375 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:05:18.772Z,1520697918.772 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:05:19.154Z,1520697919.154 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:05:19.561Z,1520697919.561 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:05:19.956Z,1520697919.956 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:05:20.358Z,1520697920.358 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:05:20.761Z,1520697920.761 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:05:21.165Z,1520697921.165 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:05:21.582Z,1520697921.582 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:05:21.960Z,1520697921.960 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:05:22.360Z,1520697922.360 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:05:22.757Z,1520697922.757 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:05:23.160Z,1520697923.160 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:05:23.560Z,1520697923.560 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:05:23.956Z,1520697923.956 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:05:24.361Z,1520697924.361 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:05:24.760Z,1520697924.760 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:05:25.166Z,1520697925.166 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:05:25.568Z,1520697925.568 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:05:25.967Z,1520697925.967 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:05:26.378Z,1520697926.378 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:05:26.766Z,1520697926.766 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:05:27.164Z,1520697927.164 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:05:27.569Z,1520697927.569 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:05:27.969Z,1520697927.969 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:05:28.366Z,1520697928.366 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:05:28.775Z,1520697928.775 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:05:29.173Z,1520697929.173 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:05:29.572Z,1520697929.572 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:05:29.967Z,1520697929.967 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:05:30.371Z,1520697930.371 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:05:30.769Z,1520697930.769 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:05:31.165Z,1520697931.165 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:05:31.569Z,1520697931.569 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:05:31.972Z,1520697931.972 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:05:32.358Z,1520697932.358 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:05:32.776Z,1520697932.776 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:05:33.160Z,1520697933.160 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:05:33.576Z,1520697933.576 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:05:33.964Z,1520697933.964 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:05:34.356Z,1520697934.356 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:05:34.764Z,1520697934.764 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:05:35.161Z,1520697935.161 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:05:35.560Z,1520697935.560 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:05:35.982Z,1520697935.982 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:05:36.360Z,1520697936.360 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:05:36.760Z,1520697936.760 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:05:37.165Z,1520697937.165 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:05:37.189Z,1520697937.189 [BPC1](ERROR): Failed to receive battery data
2018-03-10T16:05:37.189Z,1520697937.189 [BPC1] Communications Fault, FailCount= 1
2018-03-10T16:05:37.189Z,1520697937.189 [BPC1](ERROR): Communications Fault
2018-03-10T16:05:37.212Z,1520697937.212 [CBIT](ERROR): Communications Fault in component: BPC1
2018-03-10T16:05:37.560Z,1520697937.560 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:05:37.964Z,1520697937.964 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:05:38.354Z,1520697938.354 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:05:38.407Z,1520697938.407 [CBIT](INFO): Clearing failed state for component BPC1
2018-03-10T16:05:38.407Z,1520697938.407 [BPC1] No Fault, FailCount= 1
2018-03-10T16:05:38.760Z,1520697938.760 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:05:39.160Z,1520697939.160 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:05:39.568Z,1520697939.568 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:05:39.968Z,1520697939.968 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:05:40.365Z,1520697940.365 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:05:40.764Z,1520697940.764 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:05:40.846Z,1520697940.846 [CBIT](DEBUG): EFC running - data check-sum false
2018-03-10T16:05:41.168Z,1520697941.168 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:05:41.572Z,1520697941.572 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:05:41.974Z,1520697941.974 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:05:42.375Z,1520697942.375 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:05:42.776Z,1520697942.776 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:05:43.154Z,1520697943.154 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:05:43.570Z,1520697943.570 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:05:43.977Z,1520697943.977 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:05:44.354Z,1520697944.354 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:05:44.769Z,1520697944.769 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:05:45.172Z,1520697945.172 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:05:45.576Z,1520697945.576 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:05:45.988Z,1520697945.988 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:05:46.367Z,1520697946.367 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:05:46.767Z,1520697946.767 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:05:47.162Z,1520697947.162 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:05:51.578Z,1520697951.578 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:05:51.607Z,1520697951.607 [PNI_TCM](FAULT): Failed to acquire valid data within timeout.
2018-03-10T16:05:51.607Z,1520697951.607 [PNI_TCM] Data Fault, FailCount= 1
2018-03-10T16:05:51.607Z,1520697951.607 [PNI_TCM](ERROR): Data Fault
2018-03-10T16:05:51.613Z,1520697951.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 4.408830 seconds old.
2018-03-10T16:05:51.615Z,1520697951.615 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 4.409301 seconds old.
2018-03-10T16:05:51.617Z,1520697951.617 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 4.409603 seconds old.
2018-03-10T16:05:51.629Z,1520697951.629 [CBIT](ERROR): Data Fault in component: PNI_TCM
2018-03-10T16:05:51.726Z,1520697951.726 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:05:51.727Z,1520697951.727 [PNI_TCM](INFO): Powering down
2018-03-10T16:05:51.819Z,1520697951.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 4.615583 seconds old.
2018-03-10T16:05:51.822Z,1520697951.822 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 4.615871 seconds old.
2018-03-10T16:05:51.824Z,1520697951.824 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 4.616710 seconds old.
2018-03-10T16:05:52.109Z,1520697952.109 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:05:52.115Z,1520697952.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 4.910800 seconds old.
2018-03-10T16:05:52.117Z,1520697952.117 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 4.911275 seconds old.
2018-03-10T16:05:52.119Z,1520697952.119 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 4.911647 seconds old.
2018-03-10T16:05:52.507Z,1520697952.507 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:05:52.513Z,1520697952.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 5.309287 seconds old.
2018-03-10T16:05:52.515Z,1520697952.515 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 5.309762 seconds old.
2018-03-10T16:05:52.517Z,1520697952.517 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 5.310041 seconds old.
2018-03-10T16:05:52.901Z,1520697952.901 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:05:52.908Z,1520697952.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 5.704276 seconds old.
2018-03-10T16:05:52.910Z,1520697952.910 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 5.704663 seconds old.
2018-03-10T16:05:52.913Z,1520697952.913 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 5.705165 seconds old.
2018-03-10T16:05:52.925Z,1520697952.925 [CBIT](INFO): Clearing failed state for component PNI_TCM
2018-03-10T16:05:52.925Z,1520697952.925 [PNI_TCM] No Fault, FailCount= 1
2018-03-10T16:05:53.306Z,1520697953.306 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:05:53.320Z,1520697953.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 6.115777 seconds old.
2018-03-10T16:05:53.322Z,1520697953.322 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 6.116155 seconds old.
2018-03-10T16:05:53.324Z,1520697953.324 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 6.116743 seconds old.
2018-03-10T16:05:53.704Z,1520697953.704 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:05:53.715Z,1520697953.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 6.511294 seconds old.
2018-03-10T16:05:53.717Z,1520697953.717 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 6.511691 seconds old.
2018-03-10T16:05:53.719Z,1520697953.719 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 6.512055 seconds old.
2018-03-10T16:05:54.109Z,1520697954.109 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:05:54.149Z,1520697954.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 6.945151 seconds old.
2018-03-10T16:05:54.151Z,1520697954.151 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 6.945781 seconds old.
2018-03-10T16:05:54.153Z,1520697954.153 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 6.946073 seconds old.
2018-03-10T16:05:54.509Z,1520697954.509 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:05:54.517Z,1520697954.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 7.312810 seconds old.
2018-03-10T16:05:54.519Z,1520697954.519 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 7.313265 seconds old.
2018-03-10T16:05:54.521Z,1520697954.521 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 7.313553 seconds old.
2018-03-10T16:05:54.909Z,1520697954.909 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:05:54.923Z,1520697954.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 7.719445 seconds old.
2018-03-10T16:05:54.925Z,1520697954.925 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 7.719845 seconds old.
2018-03-10T16:05:54.928Z,1520697954.928 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 7.720235 seconds old.
2018-03-10T16:05:55.308Z,1520697955.308 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:05:55.346Z,1520697955.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 8.142491 seconds old.
2018-03-10T16:05:55.349Z,1520697955.349 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 8.143111 seconds old.
2018-03-10T16:05:55.351Z,1520697955.351 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 8.143586 seconds old.
2018-03-10T16:05:55.696Z,1520697955.696 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:05:55.707Z,1520697955.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 8.503383 seconds old.
2018-03-10T16:05:55.709Z,1520697955.709 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 8.503796 seconds old.
2018-03-10T16:05:55.712Z,1520697955.712 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 8.504179 seconds old.
2018-03-10T16:05:56.101Z,1520697956.101 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:05:56.109Z,1520697956.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 8.905161 seconds old.
2018-03-10T16:05:56.112Z,1520697956.112 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 8.906048 seconds old.
2018-03-10T16:05:56.114Z,1520697956.114 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 8.906401 seconds old.
2018-03-10T16:05:56.504Z,1520697956.504 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:05:56.930Z,1520697956.930 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:05:57.300Z,1520697957.300 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:05:57.704Z,1520697957.704 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:05:58.097Z,1520697958.097 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:05:58.508Z,1520697958.508 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:05:58.904Z,1520697958.904 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:05:59.304Z,1520697959.304 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:05:59.708Z,1520697959.708 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:06:00.106Z,1520697960.106 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:06:00.504Z,1520697960.504 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:06:00.909Z,1520697960.909 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:06:01.308Z,1520697961.308 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:06:01.708Z,1520697961.708 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:06:02.114Z,1520697962.114 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:06:02.512Z,1520697962.512 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:06:02.910Z,1520697962.910 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:06:03.309Z,1520697963.309 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:06:03.705Z,1520697963.705 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:06:04.105Z,1520697964.105 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:06:04.504Z,1520697964.504 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:06:04.905Z,1520697964.905 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:06:05.304Z,1520697965.304 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:06:05.704Z,1520697965.704 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:06:06.104Z,1520697966.104 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:06:06.504Z,1520697966.504 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:06:06.908Z,1520697966.908 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:06:07.304Z,1520697967.304 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:06:07.708Z,1520697967.708 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:06:08.108Z,1520697968.108 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:06:08.504Z,1520697968.504 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:06:08.908Z,1520697968.908 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:06:08.916Z,1520697968.916 [BPC1](FAULT): Failed to initialize
2018-03-10T16:06:08.916Z,1520697968.916 [BPC1] Communications Fault, FailCount= 2
2018-03-10T16:06:08.916Z,1520697968.916 [BPC1](ERROR): Communications Fault
2018-03-10T16:06:08.939Z,1520697968.939 [CBIT](ERROR): Communications Fault in component: BPC1
2018-03-10T16:06:09.310Z,1520697969.310 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:06:09.701Z,1520697969.701 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:06:10.100Z,1520697970.100 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:06:10.158Z,1520697970.158 [CBIT](INFO): Clearing failed state for component BPC1
2018-03-10T16:06:10.163Z,1520697970.163 [BPC1] No Fault, FailCount= 2
2018-03-10T16:06:10.500Z,1520697970.500 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:06:10.894Z,1520697970.894 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:06:11.300Z,1520697971.300 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:06:11.709Z,1520697971.709 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:06:12.148Z,1520697972.148 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:06:12.514Z,1520697972.514 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:06:12.909Z,1520697972.909 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:06:13.308Z,1520697973.308 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:06:13.702Z,1520697973.702 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:06:14.119Z,1520697974.119 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:06:14.503Z,1520697974.503 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:06:14.896Z,1520697974.896 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:06:15.327Z,1520697975.327 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:06:15.700Z,1520697975.700 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:06:16.104Z,1520697976.104 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:06:16.509Z,1520697976.509 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:06:16.908Z,1520697976.908 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:06:17.300Z,1520697977.300 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:06:17.710Z,1520697977.710 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:06:18.104Z,1520697978.104 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:06:18.506Z,1520697978.506 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:06:18.906Z,1520697978.906 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:06:19.312Z,1520697979.312 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:06:19.709Z,1520697979.709 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:06:20.114Z,1520697980.114 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:06:20.508Z,1520697980.508 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:06:20.903Z,1520697980.903 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:06:21.309Z,1520697981.309 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:06:21.709Z,1520697981.709 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:06:22.107Z,1520697982.107 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:06:22.508Z,1520697982.508 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:06:22.909Z,1520697982.909 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:06:23.304Z,1520697983.304 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:06:23.705Z,1520697983.705 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:06:24.108Z,1520697984.108 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:06:24.505Z,1520697984.505 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:06:24.908Z,1520697984.908 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:06:25.308Z,1520697985.308 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:06:25.704Z,1520697985.704 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:06:26.105Z,1520697986.105 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:06:26.508Z,1520697986.508 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:06:26.908Z,1520697986.908 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:06:27.307Z,1520697987.307 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:06:27.708Z,1520697987.708 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:06:28.108Z,1520697988.108 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:06:28.507Z,1520697988.507 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:06:28.912Z,1520697988.912 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:06:29.308Z,1520697989.308 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:06:29.709Z,1520697989.709 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:06:30.112Z,1520697990.112 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:06:30.496Z,1520697990.496 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:06:30.913Z,1520697990.913 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:06:31.312Z,1520697991.312 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:06:31.708Z,1520697991.708 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:06:32.109Z,1520697992.109 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:06:32.512Z,1520697992.512 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:06:32.909Z,1520697992.909 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:06:33.309Z,1520697993.309 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:06:33.709Z,1520697993.709 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:06:34.112Z,1520697994.112 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:06:34.496Z,1520697994.496 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:06:34.909Z,1520697994.909 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:06:35.296Z,1520697995.296 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:06:35.713Z,1520697995.713 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:06:36.100Z,1520697996.100 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:06:36.500Z,1520697996.500 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:06:36.912Z,1520697996.912 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:06:37.300Z,1520697997.300 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:06:37.697Z,1520697997.697 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:06:38.097Z,1520697998.097 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:06:38.501Z,1520697998.501 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:06:38.901Z,1520697998.901 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:06:39.300Z,1520697999.300 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:06:39.700Z,1520697999.700 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:06:40.100Z,1520698000.100 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:06:40.500Z,1520698000.500 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:06:40.921Z,1520698000.921 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:06:40.929Z,1520698000.929 [BPC1](FAULT): Failed to initialize
2018-03-10T16:06:40.930Z,1520698000.930 [BPC1] Communications Fault, FailCount= 3
2018-03-10T16:06:40.930Z,1520698000.930 [BPC1](ERROR): Communications Fault
2018-03-10T16:06:40.952Z,1520698000.952 [CBIT](ERROR): Communications Fault in component: BPC1
2018-03-10T16:06:41.300Z,1520698001.300 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:06:41.696Z,1520698001.696 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:06:42.100Z,1520698002.100 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:06:42.148Z,1520698002.148 [CBIT](INFO): Clearing failed state for component BPC1
2018-03-10T16:06:42.148Z,1520698002.148 [BPC1] No Fault, FailCount= 3
2018-03-10T16:06:42.501Z,1520698002.501 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:06:42.896Z,1520698002.896 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:06:43.304Z,1520698003.304 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:06:43.696Z,1520698003.696 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:06:44.096Z,1520698004.096 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:06:44.505Z,1520698004.505 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:06:44.904Z,1520698004.904 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:06:45.304Z,1520698005.304 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:06:45.704Z,1520698005.704 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:06:46.106Z,1520698006.106 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:06:46.505Z,1520698006.505 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:06:46.908Z,1520698006.908 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:06:47.312Z,1520698007.312 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:06:50.473Z,1520698010.473 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:06:50.602Z,1520698010.602 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:06:50.964Z,1520698010.964 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:06:51.360Z,1520698011.360 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:06:51.766Z,1520698011.766 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:06:52.168Z,1520698012.168 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:06:52.563Z,1520698012.563 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:06:52.965Z,1520698012.965 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:06:53.358Z,1520698013.358 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:06:53.753Z,1520698013.753 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:06:54.161Z,1520698014.161 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:06:54.557Z,1520698014.557 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:06:54.960Z,1520698014.960 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:06:55.367Z,1520698015.367 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:06:55.767Z,1520698015.767 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:06:56.160Z,1520698016.160 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:06:56.560Z,1520698016.560 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:06:56.967Z,1520698016.967 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:06:57.363Z,1520698017.363 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:06:57.767Z,1520698017.767 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:06:58.156Z,1520698018.156 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:06:58.567Z,1520698018.567 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:06:58.976Z,1520698018.976 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:06:59.360Z,1520698019.360 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:06:59.748Z,1520698019.748 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:07:00.168Z,1520698020.168 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:07:00.576Z,1520698020.576 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:07:00.966Z,1520698020.966 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:07:01.364Z,1520698021.364 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:07:01.768Z,1520698021.768 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:07:02.150Z,1520698022.150 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:07:02.567Z,1520698022.567 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:07:02.952Z,1520698022.952 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:07:03.352Z,1520698023.352 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:07:03.746Z,1520698023.746 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:07:04.164Z,1520698024.164 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:07:04.553Z,1520698024.553 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:07:04.953Z,1520698024.953 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:07:05.360Z,1520698025.360 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:07:05.756Z,1520698025.756 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:07:06.157Z,1520698026.157 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:07:06.570Z,1520698026.570 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:07:06.961Z,1520698026.961 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:07:07.356Z,1520698027.356 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:07:07.758Z,1520698027.758 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:07:08.156Z,1520698028.156 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:07:08.558Z,1520698028.558 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:07:08.963Z,1520698028.963 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:07:09.356Z,1520698029.356 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:07:09.758Z,1520698029.758 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:07:10.160Z,1520698030.160 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:07:10.566Z,1520698030.566 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:07:10.957Z,1520698030.957 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:07:11.366Z,1520698031.366 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:07:11.764Z,1520698031.764 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:07:12.158Z,1520698032.158 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:07:12.554Z,1520698032.554 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:07:12.576Z,1520698032.576 [BPC1](FAULT): Failed to initialize
2018-03-10T16:07:12.576Z,1520698032.576 [BPC1] Communications Fault, FailCount= 4
2018-03-10T16:07:12.576Z,1520698032.576 [BPC1](ERROR): Communications Fault
2018-03-10T16:07:12.611Z,1520698032.611 [CBIT](ERROR): Communications Fault in component: BPC1
2018-03-10T16:07:12.952Z,1520698032.952 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:07:13.359Z,1520698033.359 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:07:13.760Z,1520698033.760 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:07:13.814Z,1520698033.814 [CBIT](INFO): Clearing failed state for component BPC1
2018-03-10T16:07:13.814Z,1520698033.814 [BPC1] No Fault, FailCount= 4
2018-03-10T16:07:14.157Z,1520698034.157 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:07:14.238Z,1520698034.238 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T16:07:14.238Z,1520698034.238 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 139
2018-03-10T16:07:14.239Z,1520698034.239 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-10T16:07:14.251Z,1520698034.251 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-10T16:07:14.566Z,1520698034.566 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:07:14.625Z,1520698034.625 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-10T16:07:14.625Z,1520698034.625 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 139
2018-03-10T16:07:14.960Z,1520698034.960 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:07:14.980Z,1520698034.980 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-10T16:07:14.980Z,1520698034.980 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-10T16:07:14.980Z,1520698034.980 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-10T16:07:15.358Z,1520698035.358 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:07:15.748Z,1520698035.748 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:07:16.163Z,1520698036.163 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:07:16.563Z,1520698036.563 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:07:16.949Z,1520698036.949 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:07:17.369Z,1520698037.369 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:07:17.749Z,1520698037.749 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:07:18.164Z,1520698038.164 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:07:18.573Z,1520698038.573 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:07:18.948Z,1520698038.948 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:07:19.348Z,1520698039.348 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:07:19.754Z,1520698039.754 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:07:20.166Z,1520698040.166 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:07:20.565Z,1520698040.565 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:07:20.969Z,1520698040.969 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:07:21.367Z,1520698041.367 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:07:21.752Z,1520698041.752 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:07:22.152Z,1520698042.152 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:07:22.568Z,1520698042.568 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:07:22.946Z,1520698042.946 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:07:23.368Z,1520698043.368 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:07:23.748Z,1520698043.748 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:07:24.150Z,1520698044.150 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:07:24.575Z,1520698044.575 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:07:24.954Z,1520698044.954 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:07:25.350Z,1520698045.350 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:07:25.775Z,1520698045.775 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:07:26.154Z,1520698046.154 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:07:26.558Z,1520698046.558 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:07:26.976Z,1520698046.976 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:07:27.348Z,1520698047.348 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:07:27.751Z,1520698047.751 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:07:28.157Z,1520698048.157 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:07:28.548Z,1520698048.548 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:07:28.950Z,1520698048.950 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:07:29.357Z,1520698049.357 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:07:29.758Z,1520698049.758 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:07:30.149Z,1520698050.149 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:07:30.562Z,1520698050.562 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:07:30.961Z,1520698050.961 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:07:31.360Z,1520698051.360 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:07:31.759Z,1520698051.759 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:07:32.162Z,1520698052.162 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:07:32.558Z,1520698052.558 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:07:32.960Z,1520698052.960 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:07:33.355Z,1520698053.355 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:07:33.756Z,1520698053.756 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:07:34.157Z,1520698054.157 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:07:34.566Z,1520698054.566 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:07:34.949Z,1520698054.949 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:07:35.356Z,1520698055.356 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:07:35.754Z,1520698055.754 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:07:36.154Z,1520698056.154 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:07:36.556Z,1520698056.556 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:07:36.952Z,1520698056.952 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:07:37.361Z,1520698057.361 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:07:37.778Z,1520698057.778 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:07:38.157Z,1520698058.157 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:07:38.552Z,1520698058.552 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:07:38.970Z,1520698058.970 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:07:39.354Z,1520698059.354 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:07:39.769Z,1520698059.769 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:07:40.157Z,1520698060.157 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:07:40.559Z,1520698060.559 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:07:40.959Z,1520698060.959 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:07:41.358Z,1520698061.358 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:07:41.756Z,1520698061.756 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:07:42.164Z,1520698062.164 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:07:42.564Z,1520698062.564 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:07:42.959Z,1520698062.959 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:07:43.364Z,1520698063.364 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:07:43.769Z,1520698063.769 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:07:44.167Z,1520698064.167 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:07:44.566Z,1520698064.566 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:07:44.970Z,1520698064.970 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:07:45.373Z,1520698065.373 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:07:45.762Z,1520698065.762 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:07:46.161Z,1520698066.161 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:07:46.568Z,1520698066.568 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:07:46.623Z,1520698066.623 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-03-10T16:07:46.624Z,1520698066.624 [Default:CheckIn:C.Wait] Stopped
2018-03-10T16:07:46.624Z,1520698066.624 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-03-10T16:07:46.624Z,1520698066.624 [Default:CheckIn:D] Running Loop=1
2018-03-10T16:07:46.968Z,1520698066.968 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:07:46.989Z,1520698066.989 [Default:CheckIn:D] Stopped
2018-03-10T16:07:46.989Z,1520698066.989 [Default:CheckIn:E] Running Loop=1
2018-03-10T16:07:47.363Z,1520698067.363 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:07:47.385Z,1520698067.385 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 648.484440 min 
2018-03-10T16:07:47.385Z,1520698067.385 [Default:CheckIn:E] Stopped
2018-03-10T16:07:47.385Z,1520698067.385 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-03-10T16:07:47.385Z,1520698067.385 [Default:CheckIn] Stopped
2018-03-10T16:07:47.385Z,1520698067.385 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-03-10T16:07:47.385Z,1520698067.385 [Default:CheckIn](INFO): Running loop #64
2018-03-10T16:07:47.385Z,1520698067.385 [Default:CheckIn] Running Loop=64
2018-03-10T16:07:47.386Z,1520698067.386 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-03-10T16:07:47.386Z,1520698067.386 [Default:CheckIn:Read_GPS] Running Loop=1
2018-03-10T16:07:50.594Z,1520698070.594 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:07:50.698Z,1520698070.698 [NAL9602](INFO): Powering up
2018-03-10T16:07:50.734Z,1520698070.734 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:07:51.081Z,1520698071.081 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:07:51.475Z,1520698071.475 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:07:51.880Z,1520698071.880 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:07:52.281Z,1520698072.281 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:07:52.677Z,1520698072.677 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:07:53.064Z,1520698073.064 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:07:53.468Z,1520698073.468 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:07:53.872Z,1520698073.872 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:07:54.272Z,1520698074.272 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:07:54.673Z,1520698074.673 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:07:55.065Z,1520698075.065 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:07:55.473Z,1520698075.473 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:07:55.869Z,1520698075.869 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:07:56.265Z,1520698076.265 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:07:56.673Z,1520698076.673 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:07:57.090Z,1520698077.090 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:07:57.472Z,1520698077.472 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:07:57.872Z,1520698077.872 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:07:58.273Z,1520698078.273 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:07:58.676Z,1520698078.676 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:07:59.077Z,1520698079.077 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:07:59.475Z,1520698079.475 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:07:59.879Z,1520698079.879 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:08:00.268Z,1520698080.268 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:08:00.668Z,1520698080.668 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:08:01.072Z,1520698081.072 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:08:01.493Z,1520698081.493 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:08:01.856Z,1520698081.856 [NAL9602](INFO): NAL9602 initialized
2018-03-10T16:08:01.873Z,1520698081.873 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:08:02.272Z,1520698082.272 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:08:02.648Z,1520698082.648 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-03-10T16:08:02.648Z,1520698082.648 [NAL9602] Data Fault, FailCount= 2
2018-03-10T16:08:02.648Z,1520698082.648 [NAL9602](ERROR): Data Fault
2018-03-10T16:08:02.665Z,1520698082.665 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:08:02.741Z,1520698082.741 [CBIT](ERROR): Data Fault in component: NAL9602
2018-03-10T16:08:03.064Z,1520698083.064 [NAL9602](INFO): Powering down
2018-03-10T16:08:03.082Z,1520698083.082 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:08:03.473Z,1520698083.473 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:08:03.876Z,1520698083.876 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:08:03.971Z,1520698083.971 [CBIT](INFO): Clearing failed state for component NAL9602
2018-03-10T16:08:03.971Z,1520698083.971 [NAL9602] No Fault, FailCount= 2
2018-03-10T16:08:04.285Z,1520698084.285 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:08:04.676Z,1520698084.676 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:08:05.064Z,1520698085.064 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:08:05.468Z,1520698085.468 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:08:05.868Z,1520698085.868 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:08:06.264Z,1520698086.264 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:08:06.668Z,1520698086.668 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:08:07.072Z,1520698087.072 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:08:07.476Z,1520698087.476 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:08:07.878Z,1520698087.878 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:08:08.277Z,1520698088.277 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:08:08.674Z,1520698088.674 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:08:09.078Z,1520698089.078 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:08:09.472Z,1520698089.472 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:08:09.876Z,1520698089.876 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:08:10.275Z,1520698090.275 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:08:10.680Z,1520698090.680 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:08:11.072Z,1520698091.072 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:08:11.475Z,1520698091.475 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:08:11.884Z,1520698091.884 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:08:12.264Z,1520698092.264 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:08:12.664Z,1520698092.664 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:08:13.068Z,1520698093.068 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:08:13.464Z,1520698093.464 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:08:13.869Z,1520698093.869 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:08:14.268Z,1520698094.268 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:08:14.673Z,1520698094.673 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:08:15.070Z,1520698095.070 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:08:15.476Z,1520698095.476 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:08:15.876Z,1520698095.876 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:08:16.273Z,1520698096.273 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:08:16.680Z,1520698096.680 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:08:17.072Z,1520698097.072 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:08:17.476Z,1520698097.476 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:08:17.874Z,1520698097.874 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:08:18.273Z,1520698098.273 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:08:18.681Z,1520698098.681 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:08:19.075Z,1520698099.075 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:08:19.468Z,1520698099.468 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:08:19.868Z,1520698099.868 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:08:20.272Z,1520698100.272 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:08:20.664Z,1520698100.664 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:08:21.068Z,1520698101.068 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:08:21.470Z,1520698101.470 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:08:21.870Z,1520698101.870 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:08:22.268Z,1520698102.268 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:08:22.676Z,1520698102.676 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:08:23.071Z,1520698103.071 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:08:23.472Z,1520698103.472 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:08:23.876Z,1520698103.876 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:08:24.280Z,1520698104.280 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:08:24.676Z,1520698104.676 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:08:25.072Z,1520698105.072 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:08:25.480Z,1520698105.480 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:08:25.868Z,1520698105.868 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:08:26.276Z,1520698106.276 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:08:26.672Z,1520698106.672 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:08:27.073Z,1520698107.073 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:08:27.473Z,1520698107.473 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:08:27.873Z,1520698107.873 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:08:28.271Z,1520698108.271 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:08:28.680Z,1520698108.680 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:08:29.072Z,1520698109.072 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:08:29.464Z,1520698109.464 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:08:29.868Z,1520698109.868 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:08:30.280Z,1520698110.280 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:08:30.667Z,1520698110.667 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:08:31.070Z,1520698111.070 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:08:31.464Z,1520698111.464 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:08:31.868Z,1520698111.868 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:08:32.269Z,1520698112.269 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:08:32.668Z,1520698112.668 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:08:33.069Z,1520698113.069 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:08:33.464Z,1520698113.464 [NAL9602](INFO): Powering up NAL9602
2018-03-10T16:08:33.482Z,1520698113.482 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:08:33.873Z,1520698113.873 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:08:34.269Z,1520698114.269 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:08:34.664Z,1520698114.664 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:08:35.073Z,1520698115.073 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:08:35.470Z,1520698115.470 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:08:35.876Z,1520698115.876 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:08:36.273Z,1520698116.273 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:08:36.677Z,1520698116.677 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:08:37.077Z,1520698117.077 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:08:37.472Z,1520698117.472 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:08:37.877Z,1520698117.877 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:08:38.272Z,1520698118.272 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:08:38.672Z,1520698118.672 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:08:39.076Z,1520698119.076 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:08:39.467Z,1520698119.467 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:08:39.876Z,1520698119.876 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:08:40.284Z,1520698120.284 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:08:40.668Z,1520698120.668 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:08:41.072Z,1520698121.072 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:08:41.468Z,1520698121.468 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:08:41.864Z,1520698121.864 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:08:42.268Z,1520698122.268 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:08:42.673Z,1520698122.673 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:08:43.068Z,1520698123.068 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:08:43.476Z,1520698123.476 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:08:43.873Z,1520698123.873 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:08:44.282Z,1520698124.282 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:08:44.657Z,1520698124.657 [NAL9602](INFO): NAL9602 initialized
2018-03-10T16:08:44.685Z,1520698124.685 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:08:45.073Z,1520698125.073 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:08:45.487Z,1520698125.487 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:08:45.891Z,1520698125.891 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:08:46.288Z,1520698126.288 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:08:46.668Z,1520698126.668 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:08:47.065Z,1520698127.065 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:08:47.470Z,1520698127.470 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:08:50.752Z,1520698130.752 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:08:50.890Z,1520698130.890 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:08:51.279Z,1520698131.279 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:08:51.662Z,1520698131.662 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:08:52.065Z,1520698132.065 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:08:52.463Z,1520698132.463 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:08:52.864Z,1520698132.865 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:08:53.264Z,1520698133.264 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:08:53.662Z,1520698133.662 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:08:54.066Z,1520698134.066 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:08:54.464Z,1520698134.464 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:08:54.872Z,1520698134.872 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:08:55.275Z,1520698135.275 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:08:55.680Z,1520698135.680 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:08:56.083Z,1520698136.083 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:08:56.479Z,1520698136.479 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:08:56.853Z,1520698136.853 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:08:57.260Z,1520698137.260 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:08:57.653Z,1520698137.653 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:08:58.062Z,1520698138.062 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:08:58.457Z,1520698138.457 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:08:58.870Z,1520698138.870 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:08:59.262Z,1520698139.262 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:08:59.666Z,1520698139.666 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:09:00.061Z,1520698140.061 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:09:00.484Z,1520698140.484 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:09:00.884Z,1520698140.884 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:09:01.275Z,1520698141.275 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:09:01.679Z,1520698141.679 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:09:02.073Z,1520698142.073 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:09:02.459Z,1520698142.459 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:09:02.863Z,1520698142.863 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:09:03.268Z,1520698143.268 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:09:03.666Z,1520698143.666 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:09:04.069Z,1520698144.069 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:09:04.461Z,1520698144.461 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:09:04.871Z,1520698144.871 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:09:05.269Z,1520698145.269 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:09:05.679Z,1520698145.679 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:09:06.072Z,1520698146.072 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:09:06.475Z,1520698146.475 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:09:06.880Z,1520698146.880 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:09:07.257Z,1520698147.257 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:09:07.656Z,1520698147.656 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:09:08.077Z,1520698148.077 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:09:08.453Z,1520698148.453 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:09:08.857Z,1520698148.857 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:09:09.277Z,1520698149.277 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:09:09.657Z,1520698149.657 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:09:10.061Z,1520698150.061 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:09:10.458Z,1520698150.458 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:09:10.887Z,1520698150.887 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:09:11.280Z,1520698151.280 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:09:11.667Z,1520698151.667 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:09:12.067Z,1520698152.067 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:09:12.462Z,1520698152.462 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:09:12.857Z,1520698152.857 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:09:13.256Z,1520698153.256 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:09:13.669Z,1520698153.669 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:09:14.062Z,1520698154.062 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:09:14.461Z,1520698154.461 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:09:14.862Z,1520698154.862 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:09:15.268Z,1520698155.268 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:09:15.665Z,1520698155.665 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:09:16.079Z,1520698156.079 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:09:16.468Z,1520698156.468 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:09:16.883Z,1520698156.883 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:09:17.269Z,1520698157.269 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:09:17.669Z,1520698157.669 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:09:18.061Z,1520698158.061 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:09:18.469Z,1520698158.469 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:09:18.865Z,1520698158.865 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:09:19.259Z,1520698159.259 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:09:19.674Z,1520698159.674 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:09:20.065Z,1520698160.065 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:09:20.462Z,1520698160.462 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:09:20.874Z,1520698160.874 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:09:21.279Z,1520698161.279 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:09:21.675Z,1520698161.675 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:09:22.076Z,1520698162.076 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:09:22.475Z,1520698162.475 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:09:22.874Z,1520698162.874 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:09:23.260Z,1520698163.260 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:09:23.660Z,1520698163.660 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:09:24.060Z,1520698164.060 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:09:24.461Z,1520698164.461 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:09:24.858Z,1520698164.858 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:09:25.252Z,1520698165.252 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:09:25.657Z,1520698165.657 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:09:26.068Z,1520698166.068 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:09:26.467Z,1520698166.467 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:09:26.869Z,1520698166.869 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:09:27.275Z,1520698167.275 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:09:27.674Z,1520698167.674 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:09:28.065Z,1520698168.065 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:09:28.465Z,1520698168.465 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:09:28.861Z,1520698168.861 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:09:29.258Z,1520698169.258 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:09:29.661Z,1520698169.661 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:09:30.065Z,1520698170.065 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:09:30.457Z,1520698170.457 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:09:30.869Z,1520698170.869 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:09:31.265Z,1520698171.265 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:09:31.669Z,1520698171.669 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:09:32.074Z,1520698172.074 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:09:32.476Z,1520698172.476 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:09:32.876Z,1520698172.876 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:09:33.257Z,1520698173.257 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:09:33.678Z,1520698173.678 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:09:34.057Z,1520698174.057 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:09:34.470Z,1520698174.470 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:09:34.882Z,1520698174.882 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:09:35.257Z,1520698175.257 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:09:35.657Z,1520698175.657 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:09:36.057Z,1520698176.057 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:09:36.453Z,1520698176.453 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:09:36.872Z,1520698176.872 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:09:37.281Z,1520698177.281 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:09:37.680Z,1520698177.680 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:09:38.086Z,1520698178.086 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:09:38.465Z,1520698178.465 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:09:38.862Z,1520698178.862 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:09:39.265Z,1520698179.265 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:09:39.663Z,1520698179.663 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:09:40.062Z,1520698180.062 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:09:40.472Z,1520698180.472 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:09:40.869Z,1520698180.869 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:09:41.269Z,1520698181.269 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:09:41.664Z,1520698181.664 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:09:42.079Z,1520698182.079 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:09:42.468Z,1520698182.468 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:09:42.874Z,1520698182.874 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:09:43.276Z,1520698183.276 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:09:43.665Z,1520698183.665 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:09:44.060Z,1520698184.060 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:09:44.460Z,1520698184.460 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:09:44.861Z,1520698184.861 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:09:45.276Z,1520698185.276 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:09:45.677Z,1520698185.677 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:09:46.078Z,1520698186.078 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:09:46.456Z,1520698186.456 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:09:46.878Z,1520698186.878 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:09:47.280Z,1520698187.280 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:09:47.667Z,1520698187.667 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:09:50.807Z,1520698190.807 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:09:50.931Z,1520698190.931 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:09:51.316Z,1520698191.316 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:09:51.712Z,1520698191.712 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:09:52.117Z,1520698192.117 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:09:52.531Z,1520698192.531 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:09:52.932Z,1520698192.932 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:09:53.331Z,1520698193.331 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:09:53.731Z,1520698193.731 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:09:54.113Z,1520698194.113 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:09:54.513Z,1520698194.513 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:09:54.913Z,1520698194.913 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:09:55.313Z,1520698195.313 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:09:55.721Z,1520698195.721 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:09:56.121Z,1520698196.121 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:09:56.520Z,1520698196.520 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:09:56.917Z,1520698196.917 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:09:57.318Z,1520698197.318 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:09:57.731Z,1520698197.731 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:09:58.135Z,1520698198.135 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:09:58.535Z,1520698198.535 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:09:58.935Z,1520698198.935 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:09:59.318Z,1520698199.318 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:09:59.722Z,1520698199.722 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:10:00.120Z,1520698200.120 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:10:00.520Z,1520698200.520 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:10:00.921Z,1520698200.921 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:10:01.321Z,1520698201.321 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:10:01.721Z,1520698201.721 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:10:02.120Z,1520698202.120 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:10:02.521Z,1520698202.521 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:10:02.930Z,1520698202.930 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:10:03.334Z,1520698203.334 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:10:03.736Z,1520698203.736 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:10:04.132Z,1520698204.132 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:10:04.513Z,1520698204.513 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:10:04.913Z,1520698204.913 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:10:05.310Z,1520698205.310 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:10:05.715Z,1520698205.715 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:10:06.112Z,1520698206.112 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:10:06.517Z,1520698206.517 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:10:06.912Z,1520698206.912 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:10:07.313Z,1520698207.313 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:10:07.717Z,1520698207.717 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:10:08.137Z,1520698208.137 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:10:08.538Z,1520698208.538 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:10:08.941Z,1520698208.941 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:10:09.323Z,1520698209.323 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:10:09.713Z,1520698209.713 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:10:10.117Z,1520698210.117 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:10:10.519Z,1520698210.519 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:10:10.922Z,1520698210.922 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:10:11.318Z,1520698211.318 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:10:11.716Z,1520698211.716 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:10:12.129Z,1520698212.129 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:10:12.521Z,1520698212.521 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:10:12.916Z,1520698212.916 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:10:13.331Z,1520698213.331 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:10:13.730Z,1520698213.730 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:10:14.131Z,1520698214.131 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:10:14.532Z,1520698214.532 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:10:14.913Z,1520698214.913 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:10:15.317Z,1520698215.317 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:10:15.348Z,1520698215.348 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T16:10:15.348Z,1520698215.348 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 140
2018-03-10T16:10:15.348Z,1520698215.348 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-10T16:10:15.362Z,1520698215.362 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-10T16:10:15.712Z,1520698215.712 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:10:15.775Z,1520698215.775 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-10T16:10:15.775Z,1520698215.775 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 140
2018-03-10T16:10:16.121Z,1520698216.121 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:10:16.159Z,1520698216.159 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-10T16:10:16.160Z,1520698216.160 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-10T16:10:16.160Z,1520698216.160 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-10T16:10:16.513Z,1520698216.513 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:10:16.921Z,1520698216.921 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:10:17.319Z,1520698217.319 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:10:17.717Z,1520698217.717 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:10:18.118Z,1520698218.118 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:10:18.536Z,1520698218.536 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:10:18.936Z,1520698218.936 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:10:19.342Z,1520698219.342 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:10:19.732Z,1520698219.732 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:10:20.118Z,1520698220.118 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:10:20.520Z,1520698220.520 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:10:20.920Z,1520698220.920 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:10:21.326Z,1520698221.326 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:10:21.721Z,1520698221.721 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:10:22.121Z,1520698222.121 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:10:22.517Z,1520698222.517 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:10:22.925Z,1520698222.925 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:10:23.321Z,1520698223.321 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:10:23.730Z,1520698223.730 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:10:24.132Z,1520698224.132 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:10:24.535Z,1520698224.535 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:10:24.932Z,1520698224.932 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:10:25.313Z,1520698225.313 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:10:25.723Z,1520698225.723 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:10:26.112Z,1520698226.112 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:10:26.513Z,1520698226.513 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:10:26.913Z,1520698226.913 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:10:27.312Z,1520698227.312 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:10:27.712Z,1520698227.712 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:10:28.116Z,1520698228.116 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:10:28.513Z,1520698228.513 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:10:28.936Z,1520698228.936 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:10:29.331Z,1520698229.331 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:10:29.740Z,1520698229.740 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:10:30.131Z,1520698230.131 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:10:30.513Z,1520698230.513 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:10:30.913Z,1520698230.913 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:10:31.313Z,1520698231.313 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:10:31.719Z,1520698231.719 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:10:32.115Z,1520698232.115 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:10:32.518Z,1520698232.518 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:10:32.921Z,1520698232.921 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:10:33.318Z,1520698233.318 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:10:33.720Z,1520698233.720 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:10:34.126Z,1520698234.126 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:10:34.528Z,1520698234.528 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:10:34.931Z,1520698234.931 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:10:35.335Z,1520698235.335 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:10:35.712Z,1520698235.712 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:10:36.117Z,1520698236.117 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:10:36.513Z,1520698236.513 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:10:36.912Z,1520698236.912 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:10:37.313Z,1520698237.313 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:10:37.713Z,1520698237.713 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:10:38.112Z,1520698238.112 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:10:38.513Z,1520698238.513 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:10:38.913Z,1520698238.913 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:10:39.335Z,1520698239.335 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:10:39.724Z,1520698239.724 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:10:40.139Z,1520698240.139 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:10:40.537Z,1520698240.537 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:10:40.914Z,1520698240.914 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:10:41.319Z,1520698241.319 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:10:41.716Z,1520698241.716 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:10:42.121Z,1520698242.121 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:10:42.521Z,1520698242.521 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:10:42.923Z,1520698242.923 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:10:43.322Z,1520698243.322 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:10:43.718Z,1520698243.718 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:10:44.127Z,1520698244.127 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:10:44.531Z,1520698244.531 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:10:44.935Z,1520698244.935 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:10:45.333Z,1520698245.333 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:10:45.736Z,1520698245.736 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:10:46.114Z,1520698246.114 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:10:46.513Z,1520698246.513 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:10:46.917Z,1520698246.917 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:10:47.313Z,1520698247.313 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:10:47.713Z,1520698247.713 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:10:51.047Z,1520698251.047 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:10:51.178Z,1520698251.178 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:10:51.584Z,1520698251.584 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:10:51.971Z,1520698251.971 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:10:52.366Z,1520698252.366 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:10:52.766Z,1520698252.766 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:10:53.167Z,1520698253.167 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:10:53.569Z,1520698253.569 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:10:53.965Z,1520698253.965 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:10:54.366Z,1520698254.366 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:10:54.769Z,1520698254.769 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:10:55.165Z,1520698255.165 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:10:55.564Z,1520698255.564 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:10:55.993Z,1520698255.993 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:10:56.384Z,1520698256.384 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:10:56.771Z,1520698256.771 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:10:57.186Z,1520698257.186 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:10:57.557Z,1520698257.557 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:10:57.969Z,1520698257.969 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:10:58.369Z,1520698258.369 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:10:58.760Z,1520698258.760 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:10:59.165Z,1520698259.165 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:10:59.565Z,1520698259.565 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:10:59.966Z,1520698259.966 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:11:00.370Z,1520698260.370 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:11:00.770Z,1520698260.770 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:11:01.175Z,1520698261.175 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:11:01.575Z,1520698261.575 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:11:01.976Z,1520698261.976 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:11:02.375Z,1520698262.375 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:11:02.770Z,1520698262.770 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:11:03.178Z,1520698263.178 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:11:03.560Z,1520698263.560 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:11:03.957Z,1520698263.957 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:11:04.357Z,1520698264.357 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:11:04.756Z,1520698264.756 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:11:05.165Z,1520698265.165 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:11:05.565Z,1520698265.565 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:11:05.956Z,1520698265.956 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:11:06.385Z,1520698266.385 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:11:06.767Z,1520698266.767 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:11:07.167Z,1520698267.167 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:11:07.568Z,1520698267.568 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:11:07.962Z,1520698267.962 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:11:08.368Z,1520698268.368 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:11:08.761Z,1520698268.761 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:11:09.165Z,1520698269.165 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:11:09.564Z,1520698269.564 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:11:09.966Z,1520698269.966 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:11:10.377Z,1520698270.377 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:11:10.758Z,1520698270.758 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:11:11.157Z,1520698271.157 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:11:11.574Z,1520698271.574 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:11:11.981Z,1520698271.981 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:11:12.385Z,1520698272.385 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:11:12.780Z,1520698272.780 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:11:13.157Z,1520698273.157 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:11:13.553Z,1520698273.553 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:11:13.961Z,1520698273.961 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:11:14.357Z,1520698274.357 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:11:14.762Z,1520698274.762 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:11:15.165Z,1520698275.165 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:11:15.562Z,1520698275.562 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:11:15.961Z,1520698275.961 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:11:16.366Z,1520698276.366 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:11:16.783Z,1520698276.783 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:11:17.172Z,1520698277.172 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:11:17.588Z,1520698277.588 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:11:17.973Z,1520698277.973 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:11:18.366Z,1520698278.366 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:11:18.770Z,1520698278.770 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:11:19.157Z,1520698279.157 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:11:19.552Z,1520698279.552 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:11:19.970Z,1520698279.970 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:11:20.356Z,1520698280.356 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:11:20.764Z,1520698280.764 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:11:21.161Z,1520698281.161 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:11:21.556Z,1520698281.556 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:11:21.981Z,1520698281.981 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:11:22.379Z,1520698282.379 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:11:22.767Z,1520698282.767 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:11:23.167Z,1520698283.167 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:11:23.553Z,1520698283.553 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:11:23.962Z,1520698283.962 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:11:24.362Z,1520698284.362 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:11:24.772Z,1520698284.772 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:11:25.162Z,1520698285.162 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:11:25.564Z,1520698285.564 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:11:25.964Z,1520698285.964 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:11:26.369Z,1520698286.369 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:11:26.774Z,1520698286.774 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:11:27.168Z,1520698287.168 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:11:27.579Z,1520698287.579 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:11:27.971Z,1520698287.971 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:11:28.370Z,1520698288.370 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:11:28.766Z,1520698288.766 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:11:29.165Z,1520698289.165 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:11:29.565Z,1520698289.565 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:11:29.960Z,1520698289.960 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:11:30.363Z,1520698290.363 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:11:30.769Z,1520698290.769 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:11:31.164Z,1520698291.164 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:11:31.577Z,1520698291.577 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:11:31.957Z,1520698291.957 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:11:32.380Z,1520698292.380 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:11:32.767Z,1520698292.767 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:11:33.181Z,1520698293.181 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:11:33.569Z,1520698293.569 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:11:33.956Z,1520698293.956 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:11:34.361Z,1520698294.361 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:11:34.757Z,1520698294.757 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:11:35.160Z,1520698295.160 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:11:35.557Z,1520698295.557 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:11:35.965Z,1520698295.965 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:11:36.362Z,1520698296.362 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:11:36.769Z,1520698296.769 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:11:37.160Z,1520698297.160 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:11:37.575Z,1520698297.575 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:11:37.974Z,1520698297.974 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:11:38.380Z,1520698298.380 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:11:38.780Z,1520698298.780 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:11:39.174Z,1520698299.174 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:11:39.557Z,1520698299.557 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:11:39.957Z,1520698299.957 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:11:40.357Z,1520698300.357 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:11:40.757Z,1520698300.757 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:11:41.157Z,1520698301.157 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:11:41.557Z,1520698301.557 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:11:41.961Z,1520698301.961 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:11:42.356Z,1520698302.356 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:11:42.771Z,1520698302.771 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:11:43.168Z,1520698303.168 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:11:43.567Z,1520698303.567 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:11:43.967Z,1520698303.967 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:11:44.356Z,1520698304.356 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:11:44.763Z,1520698304.763 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:11:45.162Z,1520698305.162 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:11:45.562Z,1520698305.562 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:11:45.967Z,1520698305.967 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:11:46.365Z,1520698306.365 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:11:46.778Z,1520698306.778 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:11:47.175Z,1520698307.175 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:11:47.598Z,1520698307.598 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:11:47.976Z,1520698307.976 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:11:51.195Z,1520698311.195 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:11:51.339Z,1520698311.339 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:11:51.700Z,1520698311.700 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:11:52.083Z,1520698312.083 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:11:52.489Z,1520698312.489 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:11:52.882Z,1520698312.882 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:11:53.285Z,1520698313.285 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:11:53.689Z,1520698313.689 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:11:54.094Z,1520698314.094 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:11:54.491Z,1520698314.491 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:11:54.890Z,1520698314.890 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:11:55.283Z,1520698315.283 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:11:55.677Z,1520698315.677 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:11:56.097Z,1520698316.097 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:11:56.507Z,1520698316.507 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:11:56.902Z,1520698316.902 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:11:57.302Z,1520698317.302 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:11:57.675Z,1520698317.675 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:11:58.076Z,1520698318.076 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:11:58.481Z,1520698318.481 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:11:58.877Z,1520698318.877 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:11:59.277Z,1520698319.277 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:11:59.673Z,1520698319.673 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:12:00.081Z,1520698320.081 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:12:00.483Z,1520698320.483 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:12:00.882Z,1520698320.882 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:12:01.295Z,1520698321.295 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:12:01.687Z,1520698321.687 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:12:02.096Z,1520698322.096 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:12:02.496Z,1520698322.496 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:12:02.892Z,1520698322.892 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:12:03.277Z,1520698323.277 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:12:03.682Z,1520698323.682 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:12:04.080Z,1520698324.080 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:12:04.486Z,1520698324.486 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:12:04.886Z,1520698324.886 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:12:05.286Z,1520698325.286 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:12:05.689Z,1520698325.689 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:12:06.080Z,1520698326.080 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:12:06.495Z,1520698326.495 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:12:06.900Z,1520698326.900 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:12:07.296Z,1520698327.296 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:12:07.694Z,1520698327.694 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:12:08.077Z,1520698328.077 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:12:08.477Z,1520698328.477 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:12:08.877Z,1520698328.877 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:12:09.277Z,1520698329.277 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:12:09.676Z,1520698329.676 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:12:10.076Z,1520698330.076 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:12:10.482Z,1520698330.482 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:12:10.884Z,1520698330.884 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:12:11.285Z,1520698331.285 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:12:11.696Z,1520698331.696 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:12:12.095Z,1520698332.095 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:12:12.491Z,1520698332.491 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:12:12.891Z,1520698332.891 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:12:13.282Z,1520698333.282 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:12:13.686Z,1520698333.686 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:12:14.082Z,1520698334.082 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:12:14.485Z,1520698334.485 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:12:14.893Z,1520698334.893 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:12:15.284Z,1520698335.284 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:12:15.684Z,1520698335.684 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:12:16.084Z,1520698336.084 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:12:16.489Z,1520698336.489 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:12:16.894Z,1520698336.894 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:12:17.296Z,1520698337.296 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:12:17.694Z,1520698337.694 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:12:18.092Z,1520698338.092 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:12:18.477Z,1520698338.477 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:12:18.873Z,1520698338.873 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:12:19.276Z,1520698339.276 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:12:19.676Z,1520698339.676 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:12:20.077Z,1520698340.077 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:12:20.476Z,1520698340.476 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:12:20.877Z,1520698340.877 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:12:21.274Z,1520698341.274 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:12:21.676Z,1520698341.676 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:12:22.096Z,1520698342.096 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:12:22.495Z,1520698342.495 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:12:22.907Z,1520698342.907 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:12:23.296Z,1520698343.296 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:12:23.677Z,1520698343.677 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:12:24.076Z,1520698344.076 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:12:24.476Z,1520698344.476 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:12:24.881Z,1520698344.881 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:12:25.276Z,1520698345.276 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:12:25.677Z,1520698345.677 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:12:26.077Z,1520698346.077 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:12:26.476Z,1520698346.476 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:12:26.876Z,1520698346.876 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:12:27.294Z,1520698347.294 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:12:27.706Z,1520698347.706 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:12:28.097Z,1520698348.097 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:12:28.488Z,1520698348.488 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:12:28.876Z,1520698348.876 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:12:29.277Z,1520698349.277 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:12:29.681Z,1520698349.681 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:12:30.077Z,1520698350.077 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:12:30.484Z,1520698350.484 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:12:30.877Z,1520698350.877 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:12:31.281Z,1520698351.281 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:12:31.682Z,1520698351.682 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:12:32.083Z,1520698352.083 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:12:32.488Z,1520698352.488 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:12:32.888Z,1520698352.888 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:12:33.291Z,1520698353.291 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:12:33.694Z,1520698353.694 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:12:34.086Z,1520698354.086 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:12:34.488Z,1520698354.488 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:12:34.886Z,1520698354.886 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:12:35.276Z,1520698355.276 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:12:35.677Z,1520698355.677 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:12:36.076Z,1520698356.076 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:12:36.476Z,1520698356.476 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:12:36.881Z,1520698356.881 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:12:37.277Z,1520698357.277 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:12:37.700Z,1520698357.700 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:12:38.096Z,1520698358.096 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:12:38.494Z,1520698358.494 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:12:38.896Z,1520698358.896 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:12:39.277Z,1520698359.277 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:12:39.676Z,1520698359.676 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:12:40.077Z,1520698360.077 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:12:40.477Z,1520698360.477 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:12:40.876Z,1520698360.876 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:12:41.276Z,1520698361.276 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:12:41.677Z,1520698361.677 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:12:42.081Z,1520698362.081 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:12:42.477Z,1520698362.477 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:12:42.901Z,1520698362.901 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:12:43.299Z,1520698363.299 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:12:43.701Z,1520698363.701 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:12:44.087Z,1520698364.087 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:12:44.476Z,1520698364.476 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:12:44.876Z,1520698364.876 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:12:45.277Z,1520698365.277 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:12:45.676Z,1520698365.676 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:12:46.088Z,1520698366.088 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:12:46.477Z,1520698366.477 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:12:46.885Z,1520698366.885 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:12:47.281Z,1520698367.281 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:12:47.677Z,1520698367.677 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:12:47.730Z,1520698367.730 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-03-10T16:07:47.4Z
2018-03-10T16:12:47.730Z,1520698367.730 [Default:CheckIn:Read_GPS] Stopped
2018-03-10T16:12:47.730Z,1520698367.730 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-03-10T16:12:48.108Z,1520698368.108 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:12:51.367Z,1520698371.367 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:12:51.488Z,1520698371.488 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:12:51.819Z,1520698371.819 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20180310T051512/Courier0256.lzma
2018-03-10T16:12:51.872Z,1520698371.872 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:12:52.238Z,1520698372.238 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:12:52.618Z,1520698372.618 [DataOverHttps](INFO): Moved sent file to Logs/20180310T051512/Courier0256.lzma.bak
2018-03-10T16:12:52.618Z,1520698372.618 [DataOverHttps](INFO): SBD MOMSN=8005965
2018-03-10T16:12:52.645Z,1520698372.645 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:12:53.353Z,1520698373.353 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:12:53.470Z,1520698373.470 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:12:53.869Z,1520698373.869 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:12:54.257Z,1520698374.257 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:12:54.661Z,1520698374.661 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:12:55.057Z,1520698375.057 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:12:55.457Z,1520698375.457 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:12:58.677Z,1520698378.677 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:12:58.810Z,1520698378.810 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:12:59.200Z,1520698379.200 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:12:59.595Z,1520698379.595 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:12:59.999Z,1520698379.999 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:13:00.373Z,1520698380.373 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:13:00.773Z,1520698380.773 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:13:03.935Z,1520698383.935 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:13:04.075Z,1520698384.075 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:13:04.392Z,1520698384.392 [DataOverHttps](INFO): Sending 290 bytes from file Logs/20180310T051512/Express0257.lzma
2018-03-10T16:13:04.432Z,1520698384.432 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:13:04.820Z,1520698384.820 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:13:05.189Z,1520698385.189 [DataOverHttps](INFO): Moved sent file to Logs/20180310T051512/Express0257.lzma.bak
2018-03-10T16:13:05.190Z,1520698385.190 [DataOverHttps](INFO): SBD MOMSN=8005967
2018-03-10T16:13:05.227Z,1520698385.227 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:13:05.925Z,1520698385.925 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:13:05.970Z,1520698385.970 [Default:CheckIn:Read_Iridium] Stopped
2018-03-10T16:13:05.970Z,1520698385.970 [Default:CheckIn:C.Wait] Running Loop=1
2018-03-10T16:13:05.970Z,1520698385.970 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-03-10T16:13:06.044Z,1520698386.044 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:13:06.441Z,1520698386.441 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:13:09.635Z,1520698389.635 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:13:09.778Z,1520698389.778 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:13:10.166Z,1520698390.166 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:13:10.562Z,1520698390.562 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:13:10.941Z,1520698390.941 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:13:11.340Z,1520698391.340 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:13:11.741Z,1520698391.741 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:13:12.141Z,1520698392.141 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:13:12.551Z,1520698392.551 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:13:12.948Z,1520698392.948 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:13:13.347Z,1520698393.347 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:13:13.754Z,1520698393.754 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:13:14.153Z,1520698394.153 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:13:14.574Z,1520698394.574 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:13:14.961Z,1520698394.961 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:13:15.360Z,1520698395.360 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:13:15.757Z,1520698395.757 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:13:16.146Z,1520698396.146 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:13:16.192Z,1520698396.192 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T16:13:16.192Z,1520698396.192 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 141
2018-03-10T16:13:16.192Z,1520698396.192 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-10T16:13:16.204Z,1520698396.204 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-10T16:13:16.560Z,1520698396.560 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:13:16.607Z,1520698396.607 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-10T16:13:16.607Z,1520698396.607 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 141
2018-03-10T16:13:16.947Z,1520698396.947 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:13:16.987Z,1520698396.987 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-10T16:13:16.987Z,1520698396.987 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-10T16:13:16.987Z,1520698396.987 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-10T16:13:17.352Z,1520698397.352 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:13:17.745Z,1520698397.745 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:13:18.148Z,1520698398.148 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:13:18.551Z,1520698398.551 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:13:18.949Z,1520698398.949 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:13:19.344Z,1520698399.344 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:13:19.773Z,1520698399.773 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:13:20.157Z,1520698400.157 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:13:20.559Z,1520698400.559 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:13:20.958Z,1520698400.958 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:13:21.347Z,1520698401.347 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:13:21.737Z,1520698401.737 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:13:22.152Z,1520698402.152 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:13:22.554Z,1520698402.554 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:13:22.952Z,1520698402.952 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:13:23.341Z,1520698403.341 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:13:23.744Z,1520698403.744 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:13:24.145Z,1520698404.145 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:13:24.564Z,1520698404.564 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:13:24.962Z,1520698404.962 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:13:25.368Z,1520698405.368 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:13:25.760Z,1520698405.760 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:13:26.164Z,1520698406.164 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:13:26.541Z,1520698406.541 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:13:26.941Z,1520698406.941 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:13:27.338Z,1520698407.338 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:13:27.745Z,1520698407.745 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:13:28.141Z,1520698408.141 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:13:28.544Z,1520698408.544 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:13:28.938Z,1520698408.938 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:13:29.342Z,1520698409.342 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:13:29.746Z,1520698409.746 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:13:30.146Z,1520698410.146 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:13:30.555Z,1520698410.555 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:13:30.952Z,1520698410.952 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:13:31.354Z,1520698411.354 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:13:31.761Z,1520698411.761 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:13:32.138Z,1520698412.138 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:13:32.541Z,1520698412.541 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:13:32.964Z,1520698412.964 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:13:33.341Z,1520698413.341 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:13:33.745Z,1520698413.745 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:13:34.141Z,1520698414.141 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:13:34.544Z,1520698414.544 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:13:34.946Z,1520698414.946 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:13:35.374Z,1520698415.374 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:13:35.769Z,1520698415.769 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:13:36.164Z,1520698416.164 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:13:36.571Z,1520698416.571 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:13:36.947Z,1520698416.947 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:13:37.346Z,1520698417.346 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:13:37.749Z,1520698417.749 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:13:38.157Z,1520698418.157 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:13:38.546Z,1520698418.546 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:13:38.960Z,1520698418.960 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:13:39.360Z,1520698419.360 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:13:39.742Z,1520698419.742 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:13:40.155Z,1520698420.155 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:13:40.561Z,1520698420.561 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:13:40.965Z,1520698420.965 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:13:41.363Z,1520698421.363 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:13:41.765Z,1520698421.765 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:13:42.141Z,1520698422.141 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:13:42.554Z,1520698422.554 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:13:42.953Z,1520698422.953 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:13:43.345Z,1520698423.345 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:13:43.746Z,1520698423.746 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:13:44.159Z,1520698424.159 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:13:44.545Z,1520698424.545 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:13:44.948Z,1520698424.948 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:13:45.361Z,1520698425.361 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:13:45.768Z,1520698425.768 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:13:46.165Z,1520698426.165 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:13:46.564Z,1520698426.564 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:13:46.963Z,1520698426.963 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:13:47.356Z,1520698427.356 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:13:47.761Z,1520698427.761 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:13:48.143Z,1520698428.143 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:13:48.565Z,1520698428.565 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:13:48.949Z,1520698428.949 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:13:49.347Z,1520698429.347 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:13:49.757Z,1520698429.757 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:13:50.153Z,1520698430.153 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:13:50.554Z,1520698430.554 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:13:50.924Z,1520698430.924 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session.
2018-03-10T16:13:50.954Z,1520698430.954 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:13:51.351Z,1520698431.351 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:13:51.749Z,1520698431.749 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:13:52.152Z,1520698432.152 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:13:52.548Z,1520698432.548 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:13:52.935Z,1520698432.935 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:13:53.341Z,1520698433.341 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:13:53.755Z,1520698433.755 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:13:54.135Z,1520698434.135 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:13:54.540Z,1520698434.540 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:13:54.936Z,1520698434.936 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:13:55.342Z,1520698435.342 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:13:55.736Z,1520698435.736 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:13:56.137Z,1520698436.137 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:13:56.536Z,1520698436.536 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:13:56.963Z,1520698436.963 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:13:57.340Z,1520698437.340 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:13:57.740Z,1520698437.740 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:13:58.153Z,1520698438.153 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:13:58.554Z,1520698438.554 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:13:58.940Z,1520698438.940 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:13:59.340Z,1520698439.340 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:13:59.747Z,1520698439.747 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:14:00.148Z,1520698440.148 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:14:00.545Z,1520698440.545 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:14:00.945Z,1520698440.945 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:14:01.345Z,1520698441.345 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:14:01.747Z,1520698441.747 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:14:02.149Z,1520698442.149 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:14:02.544Z,1520698442.544 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:14:02.949Z,1520698442.949 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:14:03.350Z,1520698443.350 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:14:03.748Z,1520698443.748 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:14:04.148Z,1520698444.148 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:14:04.547Z,1520698444.547 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:14:04.951Z,1520698444.951 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:14:05.356Z,1520698445.356 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:14:05.746Z,1520698445.746 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:14:06.148Z,1520698446.148 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:14:06.551Z,1520698446.551 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:14:09.974Z,1520698449.974 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:14:10.109Z,1520698450.109 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:14:10.460Z,1520698450.460 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:14:10.857Z,1520698450.857 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:14:11.261Z,1520698451.261 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:14:11.657Z,1520698451.657 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:14:12.057Z,1520698452.057 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:14:12.456Z,1520698452.456 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:14:12.856Z,1520698452.856 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:14:13.266Z,1520698453.266 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:14:13.656Z,1520698453.656 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:14:14.052Z,1520698454.052 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:14:14.459Z,1520698454.459 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:14:14.843Z,1520698454.843 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:14:15.244Z,1520698455.244 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:14:15.648Z,1520698455.648 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:14:16.052Z,1520698456.052 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:14:16.468Z,1520698456.468 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:14:16.848Z,1520698456.848 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:14:17.248Z,1520698457.248 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:14:17.673Z,1520698457.673 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:14:18.054Z,1520698458.054 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:14:18.449Z,1520698458.449 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:14:18.848Z,1520698458.848 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:14:19.245Z,1520698459.245 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:14:19.652Z,1520698459.652 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:14:20.044Z,1520698460.044 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:14:20.444Z,1520698460.444 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:14:20.852Z,1520698460.852 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:14:21.252Z,1520698461.252 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:14:21.636Z,1520698461.636 [NAL9602](INFO): Powering down
2018-03-10T16:14:21.654Z,1520698461.654 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:14:22.053Z,1520698462.053 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:14:22.457Z,1520698462.457 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:14:22.861Z,1520698462.861 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:14:23.256Z,1520698463.256 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:14:23.666Z,1520698463.666 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:14:24.056Z,1520698464.056 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:14:24.444Z,1520698464.444 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:14:24.844Z,1520698464.844 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:14:25.256Z,1520698465.256 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:14:25.656Z,1520698465.656 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:14:26.055Z,1520698466.055 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:14:26.451Z,1520698466.451 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:14:26.843Z,1520698466.843 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:14:27.244Z,1520698467.244 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:14:27.649Z,1520698467.649 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:14:28.052Z,1520698468.052 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:14:28.448Z,1520698468.448 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:14:28.848Z,1520698468.848 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:14:29.248Z,1520698469.248 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:14:29.649Z,1520698469.649 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:14:30.044Z,1520698470.044 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:14:30.448Z,1520698470.448 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:14:30.848Z,1520698470.848 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:14:31.252Z,1520698471.252 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:14:31.656Z,1520698471.656 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:14:32.053Z,1520698472.053 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:14:32.449Z,1520698472.449 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:14:32.848Z,1520698472.848 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:14:33.255Z,1520698473.255 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:14:33.649Z,1520698473.649 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:14:34.053Z,1520698474.053 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:14:34.458Z,1520698474.458 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:14:34.855Z,1520698474.855 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:14:35.256Z,1520698475.256 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:14:35.656Z,1520698475.656 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:14:36.056Z,1520698476.056 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:14:36.454Z,1520698476.454 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:14:36.856Z,1520698476.856 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:14:37.260Z,1520698477.260 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:14:37.656Z,1520698477.656 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:14:38.054Z,1520698478.054 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:14:38.444Z,1520698478.444 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:14:38.860Z,1520698478.860 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:14:39.265Z,1520698479.265 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:14:39.644Z,1520698479.644 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:14:40.092Z,1520698480.092 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:14:40.448Z,1520698480.448 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:14:40.848Z,1520698480.848 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:14:41.262Z,1520698481.262 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:14:41.665Z,1520698481.665 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:14:42.045Z,1520698482.045 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:14:42.449Z,1520698482.449 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:14:42.848Z,1520698482.848 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:14:43.244Z,1520698483.244 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:14:43.648Z,1520698483.648 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:14:44.048Z,1520698484.048 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:14:44.444Z,1520698484.444 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:14:44.856Z,1520698484.856 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:14:45.248Z,1520698485.248 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:14:45.648Z,1520698485.648 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:14:46.049Z,1520698486.049 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:14:46.448Z,1520698486.448 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:14:46.856Z,1520698486.856 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:14:47.256Z,1520698487.256 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:14:47.653Z,1520698487.653 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:14:48.056Z,1520698488.056 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:14:48.464Z,1520698488.464 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:14:48.854Z,1520698488.854 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:14:49.252Z,1520698489.252 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:14:49.656Z,1520698489.656 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:14:50.058Z,1520698490.058 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:14:50.456Z,1520698490.456 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:14:50.857Z,1520698490.857 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:14:51.252Z,1520698491.252 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:14:51.660Z,1520698491.660 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:14:52.060Z,1520698492.060 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:14:52.460Z,1520698492.460 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:14:52.861Z,1520698492.861 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:14:53.251Z,1520698493.251 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:14:53.656Z,1520698493.656 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:14:54.057Z,1520698494.057 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:14:54.458Z,1520698494.458 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:14:54.855Z,1520698494.855 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:14:55.260Z,1520698495.260 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:14:55.668Z,1520698495.668 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:14:56.055Z,1520698496.055 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:14:56.452Z,1520698496.452 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:14:56.844Z,1520698496.844 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:14:57.251Z,1520698497.251 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:14:57.649Z,1520698497.649 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:14:58.044Z,1520698498.044 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:14:58.448Z,1520698498.448 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:14:58.852Z,1520698498.852 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:14:59.252Z,1520698499.252 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:14:59.648Z,1520698499.648 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:15:00.056Z,1520698500.056 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:15:00.450Z,1520698500.450 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:15:00.864Z,1520698500.864 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:15:01.248Z,1520698501.248 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:15:01.656Z,1520698501.656 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:15:02.064Z,1520698502.064 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:15:02.455Z,1520698502.455 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:15:02.853Z,1520698502.853 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:15:03.254Z,1520698503.254 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:15:03.659Z,1520698503.659 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:15:04.059Z,1520698504.059 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:15:04.461Z,1520698504.461 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:15:04.856Z,1520698504.856 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:15:05.254Z,1520698505.254 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:15:05.652Z,1520698505.652 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:15:06.060Z,1520698506.060 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:15:06.460Z,1520698506.460 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:15:06.866Z,1520698506.866 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:15:10.117Z,1520698510.117 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:15:10.128Z,1520698510.128 [BPC1](ERROR): Bank B: No match for stick 2 serial number:1717 in the onboard configuration file.
2018-03-10T16:15:10.128Z,1520698510.128 [BPC1](ERROR): Failed to parse Bank B battery data
2018-03-10T16:15:10.129Z,1520698510.129 [BPC1] Data Fault, FailCount= 1
2018-03-10T16:15:10.129Z,1520698510.129 [BPC1](ERROR): Data Fault
2018-03-10T16:15:10.195Z,1520698510.195 [CBIT](ERROR): Data Fault in component: BPC1
2018-03-10T16:15:10.239Z,1520698510.239 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:15:10.640Z,1520698510.640 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:15:11.038Z,1520698511.038 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:15:11.087Z,1520698511.087 [CBIT](INFO): Clearing failed state for component BPC1
2018-03-10T16:15:11.087Z,1520698511.087 [BPC1] No Fault, FailCount= 1
2018-03-10T16:15:11.436Z,1520698511.436 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:15:11.838Z,1520698511.838 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:15:12.234Z,1520698512.234 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:15:12.637Z,1520698512.637 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:15:13.034Z,1520698513.034 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:15:13.432Z,1520698513.432 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:15:13.837Z,1520698513.837 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:15:14.248Z,1520698514.248 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:15:14.624Z,1520698514.624 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:15:15.024Z,1520698515.024 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:15:15.428Z,1520698515.428 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:15:15.825Z,1520698515.825 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:15:16.229Z,1520698516.229 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:15:16.640Z,1520698516.640 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:15:17.039Z,1520698517.039 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:15:17.432Z,1520698517.432 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:15:17.846Z,1520698517.846 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:15:18.236Z,1520698518.236 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:15:18.637Z,1520698518.637 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:15:19.036Z,1520698519.036 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:15:19.424Z,1520698519.424 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:15:19.824Z,1520698519.824 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:15:20.248Z,1520698520.248 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:15:20.624Z,1520698520.624 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:15:21.022Z,1520698521.022 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:15:21.440Z,1520698521.440 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:15:21.828Z,1520698521.828 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:15:22.229Z,1520698522.229 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:15:22.641Z,1520698522.641 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:15:23.032Z,1520698523.032 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:15:23.433Z,1520698523.433 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:15:23.846Z,1520698523.846 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:15:24.224Z,1520698524.224 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:15:24.624Z,1520698524.624 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:15:25.035Z,1520698525.035 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:15:25.436Z,1520698525.436 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:15:25.824Z,1520698525.824 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:15:26.231Z,1520698526.231 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:15:26.628Z,1520698526.628 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:15:27.024Z,1520698527.024 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:15:27.436Z,1520698527.436 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:15:27.829Z,1520698527.829 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:15:28.228Z,1520698528.228 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:15:28.633Z,1520698528.633 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:15:29.024Z,1520698529.024 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:15:29.422Z,1520698529.422 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:15:29.829Z,1520698529.829 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:15:30.224Z,1520698530.224 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:15:30.624Z,1520698530.624 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:15:31.049Z,1520698531.049 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:15:31.424Z,1520698531.424 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:15:31.824Z,1520698531.824 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:15:32.229Z,1520698532.229 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:15:32.624Z,1520698532.624 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:15:33.028Z,1520698533.028 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:15:33.436Z,1520698533.436 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:15:33.841Z,1520698533.841 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:15:34.230Z,1520698534.230 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:15:34.637Z,1520698534.637 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:15:35.034Z,1520698535.034 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:15:35.424Z,1520698535.424 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:15:35.845Z,1520698535.845 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:15:36.225Z,1520698536.225 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:15:36.625Z,1520698536.625 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:15:37.037Z,1520698537.037 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:15:37.424Z,1520698537.424 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:15:37.822Z,1520698537.822 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:15:38.232Z,1520698538.232 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:15:38.632Z,1520698538.632 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:15:39.026Z,1520698539.026 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:15:39.434Z,1520698539.434 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:15:39.841Z,1520698539.841 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:15:40.229Z,1520698540.229 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:15:40.636Z,1520698540.636 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:15:41.024Z,1520698541.024 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:15:41.072Z,1520698541.072 [CBIT](DEBUG): EFC running - data check-sum false
2018-03-10T16:15:41.426Z,1520698541.426 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:15:41.829Z,1520698541.829 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:15:41.837Z,1520698541.837 [BPC1](FAULT): Failed to initialize
2018-03-10T16:15:41.837Z,1520698541.837 [BPC1] Communications Fault, FailCount= 2
2018-03-10T16:15:41.837Z,1520698541.837 [BPC1](ERROR): Communications Fault
2018-03-10T16:15:41.900Z,1520698541.900 [CBIT](ERROR): Communications Fault in component: BPC1
2018-03-10T16:15:42.228Z,1520698542.228 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:15:42.628Z,1520698542.628 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:15:43.032Z,1520698543.032 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:15:43.085Z,1520698543.085 [CBIT](INFO): Clearing failed state for component BPC1
2018-03-10T16:15:43.085Z,1520698543.085 [BPC1] No Fault, FailCount= 2
2018-03-10T16:15:43.428Z,1520698543.428 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:15:43.830Z,1520698543.830 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:15:44.236Z,1520698544.236 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:15:44.628Z,1520698544.628 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:15:45.024Z,1520698545.024 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:15:45.433Z,1520698545.433 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:15:45.832Z,1520698545.832 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:15:46.259Z,1520698546.259 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:15:46.645Z,1520698546.645 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:15:47.038Z,1520698547.038 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:15:47.427Z,1520698547.427 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:15:47.840Z,1520698547.840 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:15:48.238Z,1520698548.238 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:15:48.638Z,1520698548.638 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:15:49.037Z,1520698549.037 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:15:49.438Z,1520698549.438 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:15:49.838Z,1520698549.838 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:15:50.240Z,1520698550.240 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:15:50.630Z,1520698550.630 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:15:51.022Z,1520698551.022 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:15:51.425Z,1520698551.425 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:15:51.829Z,1520698551.829 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:15:52.231Z,1520698552.231 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:15:52.632Z,1520698552.632 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:15:53.028Z,1520698553.028 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:15:53.426Z,1520698553.426 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:15:53.835Z,1520698553.835 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:15:54.235Z,1520698554.235 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:15:54.636Z,1520698554.636 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:15:55.036Z,1520698555.036 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:15:55.437Z,1520698555.437 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:15:55.822Z,1520698555.822 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:15:56.236Z,1520698556.236 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:15:56.636Z,1520698556.636 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:15:57.037Z,1520698557.037 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:15:57.430Z,1520698557.430 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:15:57.831Z,1520698557.831 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:15:58.222Z,1520698558.222 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:15:58.650Z,1520698558.650 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:15:59.032Z,1520698559.032 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:15:59.422Z,1520698559.422 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:15:59.828Z,1520698559.828 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:16:00.232Z,1520698560.232 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:16:00.624Z,1520698560.624 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:16:01.037Z,1520698561.037 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:16:01.428Z,1520698561.428 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:16:01.834Z,1520698561.834 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:16:02.236Z,1520698562.236 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:16:02.636Z,1520698562.636 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:16:03.029Z,1520698563.029 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:16:03.433Z,1520698563.433 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:16:03.837Z,1520698563.837 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:16:04.225Z,1520698564.225 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:16:04.640Z,1520698564.640 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:16:05.033Z,1520698565.033 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:16:05.429Z,1520698565.429 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:16:05.833Z,1520698565.833 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:16:06.233Z,1520698566.233 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:16:06.631Z,1520698566.631 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:16:07.033Z,1520698567.033 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:16:07.434Z,1520698567.434 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:16:07.833Z,1520698567.833 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:16:11.065Z,1520698571.065 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:16:11.187Z,1520698571.187 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:16:11.560Z,1520698571.560 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:16:11.952Z,1520698571.952 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:16:12.344Z,1520698572.344 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:16:12.744Z,1520698572.744 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:16:13.144Z,1520698573.144 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:16:13.546Z,1520698573.546 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:16:13.554Z,1520698573.554 [BPC1](FAULT): Failed to initialize
2018-03-10T16:16:13.554Z,1520698573.554 [BPC1] Communications Fault, FailCount= 3
2018-03-10T16:16:13.554Z,1520698573.554 [BPC1](ERROR): Communications Fault
2018-03-10T16:16:13.599Z,1520698573.599 [CBIT](ERROR): Communications Fault in component: BPC1
2018-03-10T16:16:13.973Z,1520698573.973 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:16:14.350Z,1520698574.350 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:16:14.752Z,1520698574.752 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:16:14.795Z,1520698574.795 [CBIT](INFO): Clearing failed state for component BPC1
2018-03-10T16:16:14.795Z,1520698574.795 [BPC1] No Fault, FailCount= 3
2018-03-10T16:16:15.158Z,1520698575.158 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:16:15.569Z,1520698575.569 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:16:15.968Z,1520698575.968 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:16:16.353Z,1520698576.353 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:16:16.757Z,1520698576.757 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:16:17.165Z,1520698577.165 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:16:17.183Z,1520698577.183 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T16:16:17.184Z,1520698577.184 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 142
2018-03-10T16:16:17.184Z,1520698577.184 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-10T16:16:17.216Z,1520698577.216 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-10T16:16:17.561Z,1520698577.561 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:16:17.589Z,1520698577.589 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-10T16:16:17.589Z,1520698577.589 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 142
2018-03-10T16:16:17.954Z,1520698577.954 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:16:18.011Z,1520698578.011 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-10T16:16:18.012Z,1520698578.012 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-10T16:16:18.012Z,1520698578.012 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-10T16:16:18.353Z,1520698578.353 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:16:18.757Z,1520698578.757 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:16:19.153Z,1520698579.153 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:16:19.557Z,1520698579.557 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:16:19.941Z,1520698579.941 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:16:20.336Z,1520698580.336 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:16:20.737Z,1520698580.737 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:16:21.166Z,1520698581.166 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:16:21.576Z,1520698581.576 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:16:21.963Z,1520698581.963 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:16:22.364Z,1520698582.364 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:16:22.763Z,1520698582.763 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:16:23.165Z,1520698583.165 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:16:23.545Z,1520698583.545 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:16:23.972Z,1520698583.972 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:16:24.362Z,1520698584.362 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:16:24.776Z,1520698584.776 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:16:25.146Z,1520698585.146 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:16:25.548Z,1520698585.548 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:16:25.948Z,1520698585.948 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:16:26.345Z,1520698586.345 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:16:26.748Z,1520698586.748 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:16:27.148Z,1520698587.148 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:16:27.537Z,1520698587.537 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:16:27.940Z,1520698587.940 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:16:28.340Z,1520698588.340 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:16:28.776Z,1520698588.776 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:16:29.150Z,1520698589.150 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:16:29.553Z,1520698589.553 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:16:29.964Z,1520698589.964 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:16:30.370Z,1520698590.370 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:16:30.740Z,1520698590.740 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:16:31.173Z,1520698591.173 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:16:31.553Z,1520698591.553 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:16:31.968Z,1520698591.968 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:16:32.343Z,1520698592.343 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:16:32.752Z,1520698592.752 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:16:33.148Z,1520698593.148 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:16:33.551Z,1520698593.551 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:16:33.946Z,1520698593.946 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:16:34.349Z,1520698594.349 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:16:34.745Z,1520698594.745 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:16:35.145Z,1520698595.145 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:16:35.545Z,1520698595.545 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:16:35.989Z,1520698595.989 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:16:36.341Z,1520698596.341 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:16:36.765Z,1520698596.765 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:16:37.162Z,1520698597.162 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:16:37.564Z,1520698597.564 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:16:37.944Z,1520698597.944 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:16:38.368Z,1520698598.368 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:16:38.737Z,1520698598.737 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:16:39.153Z,1520698599.153 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:16:39.566Z,1520698599.566 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:16:39.943Z,1520698599.943 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:16:40.357Z,1520698600.357 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:16:40.745Z,1520698600.745 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:16:41.142Z,1520698601.142 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:16:41.557Z,1520698601.557 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:16:41.952Z,1520698601.952 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:16:42.337Z,1520698602.337 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:16:42.748Z,1520698602.748 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:16:43.146Z,1520698603.146 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:16:43.572Z,1520698603.572 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:16:43.961Z,1520698603.961 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:16:44.354Z,1520698604.354 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:16:44.758Z,1520698604.758 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:16:45.172Z,1520698605.172 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:16:45.574Z,1520698605.574 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:16:45.582Z,1520698605.582 [BPC1](FAULT): Failed to initialize
2018-03-10T16:16:45.582Z,1520698605.582 [BPC1] Communications Fault, FailCount= 4
2018-03-10T16:16:45.582Z,1520698605.582 [BPC1](ERROR): Communications Fault
2018-03-10T16:16:45.633Z,1520698605.633 [CBIT](ERROR): Communications Fault in component: BPC1
2018-03-10T16:16:45.958Z,1520698605.958 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:16:46.372Z,1520698606.372 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:16:46.757Z,1520698606.757 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:16:46.786Z,1520698606.786 [CBIT](INFO): Clearing failed state for component BPC1
2018-03-10T16:16:46.786Z,1520698606.786 [BPC1] No Fault, FailCount= 4
2018-03-10T16:16:47.145Z,1520698607.145 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:16:47.543Z,1520698607.543 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:16:47.944Z,1520698607.944 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:16:48.345Z,1520698608.345 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:16:48.762Z,1520698608.762 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:16:49.139Z,1520698609.139 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:16:49.536Z,1520698609.536 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:16:49.948Z,1520698609.948 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:16:50.379Z,1520698610.379 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:16:50.778Z,1520698610.778 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:16:51.152Z,1520698611.152 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:16:51.574Z,1520698611.574 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:16:51.977Z,1520698611.977 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:16:52.354Z,1520698612.354 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:16:52.769Z,1520698612.769 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:16:53.146Z,1520698613.146 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:16:53.546Z,1520698613.546 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:16:53.944Z,1520698613.944 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:16:54.345Z,1520698614.345 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:16:54.756Z,1520698614.756 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:16:55.144Z,1520698615.144 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:16:55.544Z,1520698615.544 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:16:55.946Z,1520698615.946 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:16:56.347Z,1520698616.347 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:16:56.761Z,1520698616.761 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:16:57.166Z,1520698617.166 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:16:57.556Z,1520698617.556 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:16:57.958Z,1520698617.958 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:16:58.364Z,1520698618.364 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:16:58.737Z,1520698618.737 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:16:59.159Z,1520698619.159 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:16:59.558Z,1520698619.558 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:16:59.957Z,1520698619.957 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:17:00.367Z,1520698620.367 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:17:00.756Z,1520698620.756 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:17:01.146Z,1520698621.146 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:17:01.536Z,1520698621.536 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:17:01.961Z,1520698621.961 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:17:02.345Z,1520698622.345 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:17:02.740Z,1520698622.740 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:17:03.142Z,1520698623.142 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:17:03.544Z,1520698623.544 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:17:03.944Z,1520698623.944 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:17:04.366Z,1520698624.366 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:17:04.768Z,1520698624.768 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:17:05.178Z,1520698625.178 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:17:05.556Z,1520698625.556 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:17:05.974Z,1520698625.974 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:17:06.356Z,1520698626.356 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:17:06.744Z,1520698626.744 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:17:07.156Z,1520698627.156 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:17:10.293Z,1520698630.293 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:17:10.423Z,1520698630.423 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:17:10.792Z,1520698630.792 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:17:11.183Z,1520698631.183 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:17:11.594Z,1520698631.594 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:17:11.997Z,1520698631.997 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:17:12.392Z,1520698632.392 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:17:12.798Z,1520698632.798 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:17:13.197Z,1520698633.197 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:17:13.576Z,1520698633.576 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:17:13.987Z,1520698633.987 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:17:14.385Z,1520698634.385 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:17:14.776Z,1520698634.776 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:17:15.188Z,1520698635.188 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:17:15.585Z,1520698635.585 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:17:15.989Z,1520698635.989 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:17:16.381Z,1520698636.381 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:17:16.781Z,1520698636.781 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:17:17.181Z,1520698637.181 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:17:17.578Z,1520698637.578 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:17:17.982Z,1520698637.982 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:17:18.380Z,1520698638.380 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:17:18.784Z,1520698638.784 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:17:19.180Z,1520698639.180 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:17:19.586Z,1520698639.586 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:17:19.984Z,1520698639.984 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:17:20.396Z,1520698640.396 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:17:20.786Z,1520698640.786 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:17:21.184Z,1520698641.184 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:17:21.589Z,1520698641.589 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:17:21.983Z,1520698641.983 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:17:22.385Z,1520698642.385 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:17:22.789Z,1520698642.789 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:17:23.187Z,1520698643.187 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:17:23.582Z,1520698643.582 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:17:23.986Z,1520698643.986 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:17:24.385Z,1520698644.385 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:17:24.776Z,1520698644.776 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:17:25.193Z,1520698645.193 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:17:25.576Z,1520698645.576 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:17:25.976Z,1520698645.976 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:17:26.392Z,1520698646.392 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:17:26.776Z,1520698646.776 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:17:27.178Z,1520698647.178 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:17:27.584Z,1520698647.584 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:17:27.976Z,1520698647.976 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:17:28.376Z,1520698648.376 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:17:28.784Z,1520698648.784 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:17:29.181Z,1520698649.181 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:17:29.580Z,1520698649.580 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:17:29.984Z,1520698649.984 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:17:30.380Z,1520698650.380 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:17:30.789Z,1520698650.789 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:17:31.180Z,1520698651.180 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:17:31.584Z,1520698651.584 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:17:31.984Z,1520698651.984 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:17:32.392Z,1520698652.392 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:17:32.785Z,1520698652.785 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:17:33.192Z,1520698653.192 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:17:33.592Z,1520698653.592 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:17:33.990Z,1520698653.990 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:17:34.389Z,1520698654.389 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:17:34.788Z,1520698654.788 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:17:35.184Z,1520698655.184 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:17:35.584Z,1520698655.584 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:17:35.993Z,1520698655.993 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:17:36.383Z,1520698656.383 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:17:36.793Z,1520698656.793 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:17:37.189Z,1520698657.189 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:17:37.589Z,1520698657.589 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:17:37.993Z,1520698657.993 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:17:38.388Z,1520698658.388 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:17:38.790Z,1520698658.790 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:17:39.178Z,1520698659.178 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:17:39.589Z,1520698659.589 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:17:39.977Z,1520698659.977 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:17:40.381Z,1520698660.381 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:17:40.785Z,1520698660.785 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:17:41.180Z,1520698661.180 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:17:41.583Z,1520698661.583 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:17:41.988Z,1520698661.988 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:17:42.389Z,1520698662.389 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:17:42.789Z,1520698662.789 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:17:43.189Z,1520698663.189 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:17:43.589Z,1520698663.589 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:17:43.985Z,1520698663.985 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:17:44.388Z,1520698664.388 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:17:44.797Z,1520698664.797 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:17:45.178Z,1520698665.178 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:17:45.583Z,1520698665.583 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:17:45.991Z,1520698665.991 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:17:46.389Z,1520698666.389 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:17:46.787Z,1520698666.787 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:17:47.182Z,1520698667.182 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:17:47.582Z,1520698667.582 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:17:47.982Z,1520698667.982 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:17:48.380Z,1520698668.380 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:17:48.784Z,1520698668.784 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:17:49.196Z,1520698669.196 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:17:49.589Z,1520698669.589 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:17:49.988Z,1520698669.988 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:17:50.392Z,1520698670.392 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:17:50.789Z,1520698670.789 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:17:51.218Z,1520698671.218 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:17:51.601Z,1520698671.601 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:17:51.988Z,1520698671.988 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:17:52.394Z,1520698672.394 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:17:52.787Z,1520698672.787 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:17:53.189Z,1520698673.189 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:17:53.590Z,1520698673.590 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:17:54.000Z,1520698674.000 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:17:54.377Z,1520698674.377 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:17:54.794Z,1520698674.794 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:17:55.201Z,1520698675.201 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:17:55.580Z,1520698675.580 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:17:55.981Z,1520698675.981 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:17:56.385Z,1520698676.385 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:17:56.803Z,1520698676.803 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:17:57.184Z,1520698677.184 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:17:57.585Z,1520698677.585 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:17:57.980Z,1520698677.980 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:17:58.376Z,1520698678.376 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:17:58.784Z,1520698678.784 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:17:59.180Z,1520698679.180 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:17:59.580Z,1520698679.580 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:17:59.988Z,1520698679.988 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:18:00.378Z,1520698680.378 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:18:00.788Z,1520698680.788 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:18:01.188Z,1520698681.188 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:18:01.585Z,1520698681.585 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:18:01.989Z,1520698681.989 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:18:02.385Z,1520698682.385 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:18:02.788Z,1520698682.788 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:18:03.196Z,1520698683.196 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:18:03.589Z,1520698683.589 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:18:03.988Z,1520698683.988 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:18:04.376Z,1520698684.376 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:18:04.788Z,1520698684.788 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:18:05.191Z,1520698685.191 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:18:05.592Z,1520698685.592 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:18:05.988Z,1520698685.988 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:18:06.392Z,1520698686.392 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:18:06.417Z,1520698686.417 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-03-10T16:18:06.417Z,1520698686.417 [Default:CheckIn:C.Wait] Stopped
2018-03-10T16:18:06.417Z,1520698686.417 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-03-10T16:18:06.418Z,1520698686.418 [Default:CheckIn:D] Running Loop=1
2018-03-10T16:18:06.777Z,1520698686.777 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:18:06.826Z,1520698686.826 [Default:CheckIn:D] Stopped
2018-03-10T16:18:06.826Z,1520698686.826 [Default:CheckIn:E] Running Loop=1
2018-03-10T16:18:07.180Z,1520698687.180 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:18:07.218Z,1520698687.218 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 658.815104 min 
2018-03-10T16:18:07.218Z,1520698687.218 [Default:CheckIn:E] Stopped
2018-03-10T16:18:07.218Z,1520698687.218 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-03-10T16:18:07.218Z,1520698687.218 [Default:CheckIn] Stopped
2018-03-10T16:18:07.218Z,1520698687.218 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-03-10T16:18:07.219Z,1520698687.219 [Default:CheckIn](INFO): Running loop #65
2018-03-10T16:18:07.219Z,1520698687.219 [Default:CheckIn] Running Loop=65
2018-03-10T16:18:07.219Z,1520698687.219 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-03-10T16:18:07.219Z,1520698687.219 [Default:CheckIn:Read_GPS] Running Loop=1
2018-03-10T16:18:10.411Z,1520698690.411 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:18:10.510Z,1520698690.510 [NAL9602](INFO): Powering up
2018-03-10T16:18:10.526Z,1520698690.526 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:18:10.917Z,1520698690.917 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:18:11.316Z,1520698691.316 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:18:11.716Z,1520698691.716 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:18:12.117Z,1520698692.117 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:18:12.516Z,1520698692.516 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:18:12.906Z,1520698692.906 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:18:13.320Z,1520698693.320 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:18:13.704Z,1520698693.704 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:18:14.121Z,1520698694.121 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:18:14.512Z,1520698694.512 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:18:14.904Z,1520698694.904 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:18:15.312Z,1520698695.312 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:18:15.715Z,1520698695.715 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:18:16.121Z,1520698696.121 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:18:16.517Z,1520698696.517 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:18:16.917Z,1520698696.917 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:18:17.320Z,1520698697.320 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:18:17.704Z,1520698697.704 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:18:18.108Z,1520698698.108 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:18:18.520Z,1520698698.520 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:18:18.905Z,1520698698.905 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:18:19.320Z,1520698699.320 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:18:19.708Z,1520698699.708 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:18:20.104Z,1520698700.104 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:18:20.508Z,1520698700.508 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:18:20.921Z,1520698700.921 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:18:21.331Z,1520698701.331 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:18:21.692Z,1520698701.692 [NAL9602](INFO): NAL9602 initialized
2018-03-10T16:18:21.709Z,1520698701.709 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:18:22.108Z,1520698702.108 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:18:22.532Z,1520698702.532 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:18:22.939Z,1520698702.939 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:18:23.339Z,1520698703.339 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:18:23.713Z,1520698703.713 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:18:24.127Z,1520698704.127 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:18:24.509Z,1520698704.509 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:18:24.905Z,1520698704.905 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:18:25.308Z,1520698705.308 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:18:25.709Z,1520698705.709 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:18:26.113Z,1520698706.113 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:18:26.509Z,1520698706.509 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:18:26.912Z,1520698706.912 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:18:27.312Z,1520698707.312 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:18:27.714Z,1520698707.714 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:18:28.116Z,1520698708.116 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:18:28.516Z,1520698708.516 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:18:28.916Z,1520698708.916 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:18:29.329Z,1520698709.329 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:18:29.705Z,1520698709.705 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:18:30.108Z,1520698710.108 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:18:30.529Z,1520698710.529 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:18:30.909Z,1520698710.909 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:18:31.308Z,1520698711.308 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:18:31.729Z,1520698711.729 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:18:32.112Z,1520698712.112 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:18:32.504Z,1520698712.504 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:18:32.909Z,1520698712.909 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:18:33.309Z,1520698713.309 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:18:33.709Z,1520698713.709 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:18:34.112Z,1520698714.112 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:18:34.517Z,1520698714.517 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:18:34.913Z,1520698714.913 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:18:35.316Z,1520698715.316 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:18:35.717Z,1520698715.717 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:18:36.116Z,1520698716.116 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:18:36.516Z,1520698716.516 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:18:36.918Z,1520698716.918 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:18:37.317Z,1520698717.317 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:18:37.726Z,1520698717.726 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:18:38.113Z,1520698718.113 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:18:38.512Z,1520698718.512 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:18:38.921Z,1520698718.921 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:18:39.309Z,1520698719.309 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:18:39.720Z,1520698719.720 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:18:40.121Z,1520698720.121 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:18:40.505Z,1520698720.505 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:18:40.908Z,1520698720.908 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:18:41.308Z,1520698721.308 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:18:41.705Z,1520698721.705 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:18:42.109Z,1520698722.109 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:18:42.528Z,1520698722.528 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:18:42.905Z,1520698722.905 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:18:43.329Z,1520698723.329 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:18:43.708Z,1520698723.708 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:18:44.112Z,1520698724.112 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:18:44.514Z,1520698724.514 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:18:44.916Z,1520698724.916 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:18:45.317Z,1520698725.317 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:18:45.708Z,1520698725.708 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:18:46.112Z,1520698726.112 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:18:46.520Z,1520698726.520 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:18:46.915Z,1520698726.915 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:18:47.312Z,1520698727.312 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:18:47.713Z,1520698727.713 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:18:48.117Z,1520698728.117 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:18:48.517Z,1520698728.517 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:18:48.918Z,1520698728.918 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:18:49.317Z,1520698729.317 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:18:49.726Z,1520698729.726 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:18:50.118Z,1520698730.118 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:18:50.520Z,1520698730.520 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:18:50.915Z,1520698730.915 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:18:51.315Z,1520698731.315 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:18:51.716Z,1520698731.716 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:18:52.104Z,1520698732.104 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:18:52.508Z,1520698732.508 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:18:52.920Z,1520698732.920 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:18:53.304Z,1520698733.304 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:18:53.688Z,1520698733.688 [NAL9602](ERROR): Failed to receive proper response when querying signal strength for MT queue check.
2018-03-10T16:18:53.767Z,1520698733.767 [NAL9602](FAULT): received: 
+CSQ:0

OK35, 0, 0, 0, 0

OK
2018-03-10T16:18:53.767Z,1520698733.767 [NAL9602] Data Fault, FailCount= 3
2018-03-10T16:18:53.767Z,1520698733.767 [NAL9602](ERROR): Data Fault
2018-03-10T16:18:53.785Z,1520698733.785 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:18:53.835Z,1520698733.835 [CBIT](ERROR): Data Fault in component: NAL9602
2018-03-10T16:18:54.092Z,1520698734.092 [NAL9602](INFO): Powering down
2018-03-10T16:18:54.109Z,1520698734.109 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:18:54.508Z,1520698734.508 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:18:54.908Z,1520698734.908 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:18:54.949Z,1520698734.949 [CBIT](INFO): Clearing failed state for component NAL9602
2018-03-10T16:18:54.949Z,1520698734.949 [NAL9602] No Fault, FailCount= 3
2018-03-10T16:18:55.308Z,1520698735.308 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:18:55.704Z,1520698735.704 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:18:56.108Z,1520698736.108 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:18:56.512Z,1520698736.512 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:18:56.906Z,1520698736.906 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:18:57.308Z,1520698737.308 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:18:57.708Z,1520698737.708 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:18:58.109Z,1520698738.109 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:18:58.517Z,1520698738.517 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:18:58.916Z,1520698738.916 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:18:59.317Z,1520698739.317 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:18:59.715Z,1520698739.715 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:19:00.116Z,1520698740.116 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:19:00.512Z,1520698740.512 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:19:00.915Z,1520698740.915 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:19:01.316Z,1520698741.316 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:19:01.715Z,1520698741.715 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:19:02.116Z,1520698742.116 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:19:02.525Z,1520698742.525 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:19:02.917Z,1520698742.917 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:19:03.318Z,1520698743.318 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:19:03.717Z,1520698743.717 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:19:04.120Z,1520698744.120 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:19:04.520Z,1520698744.520 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:19:04.924Z,1520698744.924 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:19:05.322Z,1520698745.322 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:19:05.721Z,1520698745.721 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:19:06.117Z,1520698746.117 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:19:06.504Z,1520698746.504 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:19:06.904Z,1520698746.904 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:19:07.316Z,1520698747.316 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:19:10.587Z,1520698750.587 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:19:10.698Z,1520698750.698 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:19:11.099Z,1520698751.099 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:19:11.501Z,1520698751.501 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:19:11.906Z,1520698751.906 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:19:12.304Z,1520698752.304 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:19:12.705Z,1520698752.705 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:19:13.100Z,1520698753.100 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:19:13.500Z,1520698753.500 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:19:13.898Z,1520698753.898 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:19:14.334Z,1520698754.334 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:19:14.696Z,1520698754.696 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:19:15.096Z,1520698755.096 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:19:15.488Z,1520698755.488 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:19:15.892Z,1520698755.892 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:19:16.290Z,1520698756.290 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:19:16.698Z,1520698756.698 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:19:17.104Z,1520698757.104 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:19:17.504Z,1520698757.504 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:19:17.904Z,1520698757.904 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:19:18.304Z,1520698758.304 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:19:18.325Z,1520698758.325 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T16:19:18.325Z,1520698758.325 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 143
2018-03-10T16:19:18.325Z,1520698758.325 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-10T16:19:18.338Z,1520698758.338 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-10T16:19:18.688Z,1520698758.688 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:19:18.748Z,1520698758.748 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-10T16:19:18.748Z,1520698758.748 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 143
2018-03-10T16:19:19.088Z,1520698759.088 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:19:19.130Z,1520698759.130 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-10T16:19:19.130Z,1520698759.130 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-10T16:19:19.130Z,1520698759.130 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-10T16:19:19.496Z,1520698759.496 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:19:19.896Z,1520698759.896 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:19:20.292Z,1520698760.292 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:19:20.697Z,1520698760.697 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:19:21.097Z,1520698761.097 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:19:21.500Z,1520698761.500 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:19:21.897Z,1520698761.897 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:19:22.300Z,1520698762.300 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:19:22.701Z,1520698762.701 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:19:23.105Z,1520698763.105 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:19:23.506Z,1520698763.506 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:19:23.899Z,1520698763.899 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:19:24.280Z,1520698764.280 [NAL9602](INFO): Powering up NAL9602
2018-03-10T16:19:24.332Z,1520698764.332 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:19:24.688Z,1520698764.688 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:19:25.096Z,1520698765.096 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:19:25.491Z,1520698765.491 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:19:25.891Z,1520698765.891 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:19:26.300Z,1520698766.300 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:19:26.697Z,1520698766.697 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:19:27.099Z,1520698767.099 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:19:27.501Z,1520698767.501 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:19:27.901Z,1520698767.901 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:19:28.301Z,1520698768.301 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:19:28.705Z,1520698768.705 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:19:29.104Z,1520698769.104 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:19:29.497Z,1520698769.497 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:19:29.896Z,1520698769.896 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:19:30.296Z,1520698770.296 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:19:30.704Z,1520698770.704 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:19:31.106Z,1520698771.106 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:19:31.491Z,1520698771.491 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:19:31.896Z,1520698771.896 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:19:32.296Z,1520698772.296 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:19:32.696Z,1520698772.696 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:19:33.088Z,1520698773.088 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:19:33.492Z,1520698773.492 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:19:33.900Z,1520698773.900 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:19:34.288Z,1520698774.288 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:19:34.697Z,1520698774.697 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:19:35.132Z,1520698775.132 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:19:35.481Z,1520698775.481 [NAL9602](INFO): NAL9602 initialized
2018-03-10T16:19:35.497Z,1520698775.497 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:19:35.901Z,1520698775.901 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:19:36.281Z,1520698776.281 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-03-10T16:19:36.281Z,1520698776.281 [NAL9602] Data Fault, FailCount= 4
2018-03-10T16:19:36.281Z,1520698776.281 [NAL9602](ERROR): Data Fault
2018-03-10T16:19:36.298Z,1520698776.298 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:19:36.381Z,1520698776.381 [CBIT](ERROR): Data Fault in component: NAL9602
2018-03-10T16:19:36.688Z,1520698776.688 [NAL9602](INFO): Powering down
2018-03-10T16:19:36.705Z,1520698776.705 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:19:37.097Z,1520698777.097 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:19:37.497Z,1520698777.497 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:19:37.600Z,1520698777.600 [CBIT](INFO): Clearing failed state for component NAL9602
2018-03-10T16:19:37.600Z,1520698777.600 [NAL9602] No Fault, FailCount= 4
2018-03-10T16:19:37.896Z,1520698777.896 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:19:38.298Z,1520698778.298 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:19:38.706Z,1520698778.706 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:19:39.103Z,1520698779.103 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:19:39.504Z,1520698779.504 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:19:39.904Z,1520698779.904 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:19:40.301Z,1520698780.301 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:19:40.696Z,1520698780.696 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:19:41.099Z,1520698781.099 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:19:41.501Z,1520698781.501 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:19:41.899Z,1520698781.899 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:19:42.311Z,1520698782.311 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:19:42.706Z,1520698782.706 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:19:43.093Z,1520698783.093 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:19:43.503Z,1520698783.503 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:19:43.889Z,1520698783.889 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:19:44.297Z,1520698784.297 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:19:44.693Z,1520698784.693 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:19:45.092Z,1520698785.092 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:19:45.506Z,1520698785.506 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:19:45.900Z,1520698785.900 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:19:46.297Z,1520698786.297 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:19:46.700Z,1520698786.700 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:19:47.099Z,1520698787.099 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:19:47.501Z,1520698787.501 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:19:47.900Z,1520698787.900 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:19:48.300Z,1520698788.300 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:19:48.700Z,1520698788.700 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:19:49.100Z,1520698789.100 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:19:49.504Z,1520698789.504 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:19:49.904Z,1520698789.904 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:19:50.297Z,1520698790.297 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:19:50.700Z,1520698790.700 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:19:51.104Z,1520698791.104 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:19:51.496Z,1520698791.496 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:19:51.892Z,1520698791.892 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:19:52.293Z,1520698792.293 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:19:52.696Z,1520698792.696 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:19:53.092Z,1520698793.092 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:19:53.492Z,1520698793.492 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:19:53.892Z,1520698793.892 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:19:54.298Z,1520698794.298 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:19:54.701Z,1520698794.701 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:19:55.102Z,1520698795.102 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:19:55.501Z,1520698795.501 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:19:55.896Z,1520698795.896 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:19:56.304Z,1520698796.304 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:19:56.700Z,1520698796.700 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:19:57.095Z,1520698797.095 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:19:57.496Z,1520698797.496 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:19:57.895Z,1520698797.895 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:19:58.304Z,1520698798.304 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:19:58.693Z,1520698798.693 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:19:59.093Z,1520698799.093 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:19:59.497Z,1520698799.497 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:19:59.897Z,1520698799.897 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:20:00.299Z,1520698800.299 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:20:00.705Z,1520698800.705 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:20:01.105Z,1520698801.105 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:20:01.500Z,1520698801.500 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:20:01.901Z,1520698801.901 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:20:02.300Z,1520698802.300 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:20:02.696Z,1520698802.696 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:20:03.088Z,1520698803.088 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:20:03.488Z,1520698803.488 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:20:03.892Z,1520698803.892 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:20:04.296Z,1520698804.296 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:20:04.700Z,1520698804.700 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:20:05.092Z,1520698805.092 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:20:05.504Z,1520698805.504 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:20:05.900Z,1520698805.900 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:20:06.297Z,1520698806.297 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:20:06.701Z,1520698806.701 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:20:07.084Z,1520698807.084 [NAL9602](INFO): Powering up NAL9602
2018-03-10T16:20:07.101Z,1520698807.101 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:20:07.500Z,1520698807.500 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:20:10.677Z,1520698810.677 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:20:10.812Z,1520698810.812 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:20:11.192Z,1520698811.192 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:20:11.589Z,1520698811.589 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:20:11.993Z,1520698811.993 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:20:12.384Z,1520698812.384 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:20:12.801Z,1520698812.801 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:20:13.180Z,1520698813.180 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:20:13.580Z,1520698813.580 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:20:13.980Z,1520698813.980 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:20:14.380Z,1520698814.380 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:20:14.783Z,1520698814.783 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:20:15.188Z,1520698815.188 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:20:15.582Z,1520698815.582 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:20:15.985Z,1520698815.985 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:20:16.387Z,1520698816.387 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:20:16.787Z,1520698816.787 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:20:17.185Z,1520698817.185 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:20:17.591Z,1520698817.591 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:20:17.964Z,1520698817.964 [NAL9602](INFO): NAL9602 initialized
2018-03-10T16:20:17.986Z,1520698817.986 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:20:18.388Z,1520698818.388 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:20:18.800Z,1520698818.800 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:20:19.202Z,1520698819.202 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:20:19.600Z,1520698819.600 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:20:19.981Z,1520698819.981 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:20:20.381Z,1520698820.381 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:20:20.780Z,1520698820.780 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:20:21.181Z,1520698821.181 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:20:21.606Z,1520698821.606 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:20:22.004Z,1520698822.004 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:20:22.397Z,1520698822.397 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:20:22.785Z,1520698822.785 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:20:23.180Z,1520698823.180 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:20:23.580Z,1520698823.580 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:20:23.981Z,1520698823.981 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:20:24.380Z,1520698824.380 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:20:24.781Z,1520698824.781 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:20:25.181Z,1520698825.181 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:20:25.581Z,1520698825.581 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:20:25.980Z,1520698825.980 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:20:26.408Z,1520698826.408 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:20:26.791Z,1520698826.791 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:20:27.195Z,1520698827.195 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:20:27.604Z,1520698827.604 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:20:27.980Z,1520698827.980 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:20:28.380Z,1520698828.380 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:20:28.781Z,1520698828.781 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:20:29.184Z,1520698829.184 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:20:29.581Z,1520698829.581 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:20:29.985Z,1520698829.985 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:20:30.389Z,1520698830.389 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:20:30.786Z,1520698830.786 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:20:31.187Z,1520698831.187 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:20:31.603Z,1520698831.603 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:20:31.992Z,1520698831.992 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:20:32.392Z,1520698832.392 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:20:32.808Z,1520698832.808 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:20:33.192Z,1520698833.192 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:20:33.589Z,1520698833.589 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:20:33.998Z,1520698833.998 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:20:34.400Z,1520698834.400 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:20:34.787Z,1520698834.787 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:20:35.196Z,1520698835.196 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:20:35.587Z,1520698835.587 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:20:35.982Z,1520698835.982 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:20:36.384Z,1520698836.384 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:20:36.804Z,1520698836.804 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:20:37.203Z,1520698837.203 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:20:37.608Z,1520698837.608 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:20:38.002Z,1520698838.002 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:20:38.381Z,1520698838.381 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:20:38.781Z,1520698838.781 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:20:39.201Z,1520698839.201 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:20:39.581Z,1520698839.581 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:20:39.980Z,1520698839.980 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:20:40.381Z,1520698840.381 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:20:40.785Z,1520698840.785 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:20:41.200Z,1520698841.200 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:20:41.601Z,1520698841.601 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:20:42.004Z,1520698842.004 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:20:42.380Z,1520698842.380 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:20:42.781Z,1520698842.781 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:20:43.208Z,1520698843.208 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:20:43.608Z,1520698843.608 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:20:43.999Z,1520698843.999 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:20:44.395Z,1520698844.395 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:20:44.781Z,1520698844.781 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:20:45.181Z,1520698845.181 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:20:45.593Z,1520698845.593 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:20:45.989Z,1520698845.989 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:20:46.389Z,1520698846.389 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:20:46.790Z,1520698846.790 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:20:47.189Z,1520698847.189 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:20:47.590Z,1520698847.590 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:20:47.989Z,1520698847.989 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:20:48.406Z,1520698848.406 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:20:48.802Z,1520698848.802 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:20:49.203Z,1520698849.203 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:20:49.603Z,1520698849.603 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:20:49.998Z,1520698849.998 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:20:50.384Z,1520698850.384 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:20:50.792Z,1520698850.792 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:20:51.198Z,1520698851.198 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:20:51.581Z,1520698851.581 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:20:51.996Z,1520698851.996 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:20:52.381Z,1520698852.381 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:20:52.781Z,1520698852.781 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:20:53.206Z,1520698853.206 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:20:53.612Z,1520698853.612 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:20:53.985Z,1520698853.985 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:20:54.381Z,1520698854.381 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:20:54.789Z,1520698854.789 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:20:55.181Z,1520698855.181 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:20:55.580Z,1520698855.580 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:20:56.012Z,1520698856.012 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:20:56.392Z,1520698856.392 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:20:56.784Z,1520698856.784 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:20:57.189Z,1520698857.189 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:20:57.581Z,1520698857.581 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:20:57.981Z,1520698857.981 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:20:58.389Z,1520698858.389 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:20:58.789Z,1520698858.789 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:20:59.184Z,1520698859.184 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:20:59.589Z,1520698859.589 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:20:59.989Z,1520698859.989 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:21:00.386Z,1520698860.386 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:21:00.789Z,1520698860.789 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:21:01.188Z,1520698861.188 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:21:01.596Z,1520698861.596 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:21:01.994Z,1520698861.994 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:21:02.392Z,1520698862.392 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:21:02.796Z,1520698862.796 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:21:03.193Z,1520698863.193 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:21:03.589Z,1520698863.589 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:21:03.989Z,1520698863.989 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:21:04.390Z,1520698864.390 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:21:04.798Z,1520698864.798 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:21:05.199Z,1520698865.199 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:21:05.591Z,1520698865.591 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:21:05.985Z,1520698865.985 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:21:06.387Z,1520698866.387 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:21:06.798Z,1520698866.798 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:21:07.197Z,1520698867.197 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:21:07.595Z,1520698867.595 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:21:10.838Z,1520698870.838 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:21:10.997Z,1520698870.997 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:21:11.321Z,1520698871.321 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:21:11.718Z,1520698871.718 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:21:12.124Z,1520698872.124 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:21:12.517Z,1520698872.517 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:21:12.933Z,1520698872.933 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:21:13.339Z,1520698873.339 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:21:13.730Z,1520698873.730 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:21:14.136Z,1520698874.136 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:21:14.531Z,1520698874.531 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:21:14.916Z,1520698874.916 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:21:15.313Z,1520698875.313 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:21:15.724Z,1520698875.724 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:21:16.112Z,1520698876.112 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:21:16.513Z,1520698876.513 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:21:16.913Z,1520698876.913 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:21:17.311Z,1520698877.311 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:21:17.713Z,1520698877.713 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:21:18.139Z,1520698878.139 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:21:18.543Z,1520698878.543 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:21:18.936Z,1520698878.936 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:21:19.336Z,1520698879.336 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:21:19.712Z,1520698879.712 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:21:20.114Z,1520698880.114 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:21:20.513Z,1520698880.513 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:21:20.913Z,1520698880.913 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:21:21.314Z,1520698881.314 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:21:21.721Z,1520698881.721 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:21:22.120Z,1520698882.120 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:21:22.521Z,1520698882.521 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:21:22.924Z,1520698882.924 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:21:23.345Z,1520698883.345 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:21:23.732Z,1520698883.732 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:21:24.130Z,1520698884.130 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:21:24.520Z,1520698884.520 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:21:24.934Z,1520698884.934 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:21:25.313Z,1520698885.313 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:21:25.732Z,1520698885.732 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:21:26.112Z,1520698886.112 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:21:26.513Z,1520698886.513 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:21:26.912Z,1520698886.912 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:21:27.316Z,1520698887.316 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:21:27.713Z,1520698887.713 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:21:28.123Z,1520698888.123 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:21:28.523Z,1520698888.523 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:21:28.923Z,1520698888.923 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:21:29.323Z,1520698889.323 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:21:29.724Z,1520698889.724 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:21:30.113Z,1520698890.113 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:21:30.512Z,1520698890.512 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:21:30.913Z,1520698890.913 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:21:31.313Z,1520698891.313 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:21:31.713Z,1520698891.713 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:21:32.113Z,1520698892.113 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:21:32.517Z,1520698892.517 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:21:32.912Z,1520698892.912 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:21:33.331Z,1520698893.331 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:21:33.732Z,1520698893.732 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:21:34.131Z,1520698894.131 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:21:34.523Z,1520698894.523 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:21:34.918Z,1520698894.918 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:21:35.321Z,1520698895.321 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:21:35.722Z,1520698895.722 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:21:36.122Z,1520698896.122 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:21:36.522Z,1520698896.522 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:21:36.920Z,1520698896.920 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:21:37.321Z,1520698897.321 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:21:37.730Z,1520698897.730 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:21:38.121Z,1520698898.121 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:21:38.529Z,1520698898.529 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:21:38.934Z,1520698898.934 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:21:39.335Z,1520698899.335 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:21:39.728Z,1520698899.728 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:21:40.112Z,1520698900.112 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:21:40.512Z,1520698900.512 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:21:40.913Z,1520698900.913 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:21:41.324Z,1520698901.324 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:21:41.708Z,1520698901.708 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:21:42.113Z,1520698902.113 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:21:42.532Z,1520698902.532 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:21:42.908Z,1520698902.908 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:21:43.317Z,1520698903.317 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:21:43.731Z,1520698903.731 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:21:44.132Z,1520698904.132 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:21:44.536Z,1520698904.536 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:21:44.942Z,1520698904.942 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:21:45.313Z,1520698905.313 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:21:45.721Z,1520698905.721 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:21:46.118Z,1520698906.118 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:21:46.517Z,1520698906.517 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:21:46.921Z,1520698906.921 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:21:47.318Z,1520698907.318 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:21:47.720Z,1520698907.720 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:21:48.126Z,1520698908.126 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:21:48.520Z,1520698908.520 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:21:48.931Z,1520698908.931 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:21:49.330Z,1520698909.330 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:21:49.730Z,1520698909.730 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:21:50.132Z,1520698910.132 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:21:50.513Z,1520698910.513 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:21:50.927Z,1520698910.927 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:21:51.312Z,1520698911.312 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:21:51.714Z,1520698911.714 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:21:52.112Z,1520698912.112 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:21:52.508Z,1520698912.508 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:21:52.917Z,1520698912.917 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:21:53.311Z,1520698913.311 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:21:53.712Z,1520698913.712 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:21:54.135Z,1520698914.135 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:21:54.529Z,1520698914.529 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:21:54.932Z,1520698914.932 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:21:55.344Z,1520698915.344 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:21:55.733Z,1520698915.733 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:21:56.117Z,1520698916.117 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:21:56.513Z,1520698916.513 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:21:56.932Z,1520698916.932 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:21:57.313Z,1520698917.313 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:21:57.725Z,1520698917.725 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:21:58.120Z,1520698918.120 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:21:58.520Z,1520698918.520 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:21:58.925Z,1520698918.925 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:21:59.335Z,1520698919.335 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:21:59.732Z,1520698919.732 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:22:00.128Z,1520698920.128 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:22:00.528Z,1520698920.528 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:22:00.917Z,1520698920.917 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:22:01.320Z,1520698921.320 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:22:01.733Z,1520698921.733 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:22:02.112Z,1520698922.112 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:22:02.509Z,1520698922.509 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:22:02.912Z,1520698922.912 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:22:03.333Z,1520698923.333 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:22:03.709Z,1520698923.709 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:22:04.144Z,1520698924.144 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:22:04.537Z,1520698924.537 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:22:04.917Z,1520698924.917 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:22:05.336Z,1520698925.336 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:22:05.733Z,1520698925.733 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:22:06.117Z,1520698926.117 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:22:06.513Z,1520698926.513 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:22:06.916Z,1520698926.916 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:22:07.312Z,1520698927.312 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:22:07.712Z,1520698927.712 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:22:10.990Z,1520698930.990 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:22:11.119Z,1520698931.119 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:22:11.465Z,1520698931.465 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:22:11.871Z,1520698931.871 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:22:12.269Z,1520698932.269 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:22:12.664Z,1520698932.664 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:22:13.067Z,1520698933.067 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:22:13.466Z,1520698933.466 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:22:13.884Z,1520698933.884 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:22:14.272Z,1520698934.272 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:22:14.667Z,1520698934.667 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:22:15.060Z,1520698935.060 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:22:15.466Z,1520698935.466 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:22:15.865Z,1520698935.865 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:22:16.276Z,1520698936.276 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:22:16.660Z,1520698936.660 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:22:17.061Z,1520698937.061 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:22:17.460Z,1520698937.460 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:22:17.865Z,1520698937.865 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:22:18.280Z,1520698938.280 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:22:18.668Z,1520698938.668 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:22:19.056Z,1520698939.056 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:22:19.454Z,1520698939.454 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:22:19.473Z,1520698939.473 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T16:22:19.473Z,1520698939.473 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 144
2018-03-10T16:22:19.473Z,1520698939.473 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-10T16:22:19.502Z,1520698939.502 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-10T16:22:19.856Z,1520698939.856 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:22:19.920Z,1520698939.920 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-10T16:22:19.920Z,1520698939.920 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 144
2018-03-10T16:22:20.261Z,1520698940.261 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:22:20.279Z,1520698940.279 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-10T16:22:20.279Z,1520698940.279 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-10T16:22:20.279Z,1520698940.279 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-10T16:22:20.658Z,1520698940.658 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:22:21.066Z,1520698941.066 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:22:21.466Z,1520698941.466 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:22:21.865Z,1520698941.865 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:22:22.266Z,1520698942.266 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:22:22.680Z,1520698942.680 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:22:23.078Z,1520698943.078 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:22:23.489Z,1520698943.489 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:22:23.881Z,1520698943.881 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:22:24.258Z,1520698944.258 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:22:24.658Z,1520698944.658 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:22:25.069Z,1520698945.069 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:22:25.467Z,1520698945.467 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:22:25.862Z,1520698945.862 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:22:26.264Z,1520698946.264 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:22:26.658Z,1520698946.658 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:22:27.079Z,1520698947.079 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:22:27.474Z,1520698947.474 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:22:27.883Z,1520698947.883 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:22:28.301Z,1520698948.301 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:22:28.672Z,1520698948.672 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:22:29.079Z,1520698949.079 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:22:29.468Z,1520698949.468 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:22:29.884Z,1520698949.884 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:22:30.270Z,1520698950.270 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:22:30.676Z,1520698950.676 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:22:31.056Z,1520698951.056 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:22:31.453Z,1520698951.453 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:22:31.868Z,1520698951.868 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:22:32.288Z,1520698952.288 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:22:32.672Z,1520698952.672 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:22:33.074Z,1520698953.074 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:22:33.501Z,1520698953.501 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:22:33.871Z,1520698953.871 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:22:34.274Z,1520698954.274 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:22:34.666Z,1520698954.666 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:22:35.070Z,1520698955.070 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:22:35.480Z,1520698955.480 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:22:35.872Z,1520698955.872 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:22:36.272Z,1520698956.272 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:22:36.666Z,1520698956.666 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:22:37.080Z,1520698957.080 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:22:37.458Z,1520698957.458 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:22:37.891Z,1520698957.891 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:22:38.300Z,1520698958.300 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:22:38.671Z,1520698958.671 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:22:39.089Z,1520698959.089 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:22:39.473Z,1520698959.473 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:22:39.870Z,1520698959.870 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:22:40.275Z,1520698960.275 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:22:40.665Z,1520698960.665 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:22:41.065Z,1520698961.065 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:22:41.475Z,1520698961.475 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:22:41.872Z,1520698961.872 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:22:42.268Z,1520698962.268 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:22:42.661Z,1520698962.661 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:22:43.078Z,1520698963.078 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:22:43.470Z,1520698963.470 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:22:43.885Z,1520698963.885 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:22:44.305Z,1520698964.305 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:22:44.662Z,1520698964.662 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:22:45.070Z,1520698965.070 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:22:45.467Z,1520698965.467 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:22:45.866Z,1520698965.866 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:22:46.286Z,1520698966.286 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:22:46.657Z,1520698966.657 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:22:47.058Z,1520698967.058 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:22:47.489Z,1520698967.489 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:22:47.860Z,1520698967.860 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:22:48.279Z,1520698968.279 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:22:48.669Z,1520698968.669 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:22:49.073Z,1520698969.073 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:22:49.477Z,1520698969.477 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:22:49.869Z,1520698969.869 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:22:50.268Z,1520698970.268 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:22:50.675Z,1520698970.675 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:22:51.070Z,1520698971.070 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:22:51.493Z,1520698971.493 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:22:51.869Z,1520698971.869 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:22:52.276Z,1520698972.276 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:22:52.658Z,1520698972.658 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:22:53.072Z,1520698973.072 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:22:53.476Z,1520698973.476 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:22:53.891Z,1520698973.891 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:22:54.276Z,1520698974.276 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:22:54.735Z,1520698974.735 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:22:55.063Z,1520698975.063 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:22:55.457Z,1520698975.457 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:22:55.872Z,1520698975.872 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:22:56.257Z,1520698976.257 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:22:56.654Z,1520698976.654 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:22:57.060Z,1520698977.060 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:22:57.456Z,1520698977.456 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:22:57.861Z,1520698977.861 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:22:58.261Z,1520698978.261 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:22:58.680Z,1520698978.680 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:22:59.074Z,1520698979.074 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:22:59.467Z,1520698979.467 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:22:59.875Z,1520698979.875 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:23:00.265Z,1520698980.265 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:23:00.662Z,1520698980.662 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:23:01.070Z,1520698981.070 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:23:01.461Z,1520698981.461 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:23:01.869Z,1520698981.869 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:23:02.265Z,1520698982.265 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:23:02.660Z,1520698982.660 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:23:03.059Z,1520698983.059 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:23:03.470Z,1520698983.470 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:23:03.880Z,1520698983.880 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:23:04.276Z,1520698984.276 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:23:04.667Z,1520698984.667 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:23:05.090Z,1520698985.090 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:23:05.461Z,1520698985.461 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:23:05.862Z,1520698985.862 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:23:06.262Z,1520698986.262 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:23:06.659Z,1520698986.659 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:23:07.069Z,1520698987.069 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:23:07.461Z,1520698987.461 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:23:07.498Z,1520698987.498 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-03-10T16:18:07.2Z
2018-03-10T16:23:07.498Z,1520698987.498 [Default:CheckIn:Read_GPS] Stopped
2018-03-10T16:23:07.498Z,1520698987.498 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-03-10T16:23:07.864Z,1520698987.864 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:23:11.226Z,1520698991.226 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:23:11.369Z,1520698991.369 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:23:11.684Z,1520698991.684 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20180310T051512/Courier0260.lzma
2018-03-10T16:23:11.719Z,1520698991.719 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:23:12.106Z,1520698992.106 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:23:12.474Z,1520698992.474 [DataOverHttps](INFO): Moved sent file to Logs/20180310T051512/Courier0260.lzma.bak
2018-03-10T16:23:12.474Z,1520698992.474 [DataOverHttps](INFO): SBD MOMSN=8006019
2018-03-10T16:23:12.513Z,1520698992.513 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:23:13.248Z,1520698993.248 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:23:13.364Z,1520698993.364 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:23:13.756Z,1520698993.756 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:23:16.998Z,1520698996.998 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:23:17.132Z,1520698997.132 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:23:17.491Z,1520698997.491 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:23:17.879Z,1520698997.879 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:23:18.273Z,1520698998.273 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:23:18.669Z,1520698998.669 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:23:19.065Z,1520698999.065 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:23:22.415Z,1520699002.415 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:23:22.550Z,1520699002.550 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:23:22.900Z,1520699002.900 [DataOverHttps](INFO): Sending 280 bytes from file Logs/20180310T051512/Express0261.lzma
2018-03-10T16:23:22.944Z,1520699002.944 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:23:23.335Z,1520699003.335 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:23:23.698Z,1520699003.698 [DataOverHttps](INFO): Moved sent file to Logs/20180310T051512/Express0261.lzma.bak
2018-03-10T16:23:23.698Z,1520699003.698 [DataOverHttps](INFO): SBD MOMSN=8006021
2018-03-10T16:23:23.734Z,1520699003.734 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:23:24.403Z,1520699004.403 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:23:24.432Z,1520699004.432 [Default:CheckIn:Read_Iridium] Stopped
2018-03-10T16:23:24.432Z,1520699004.432 [Default:CheckIn:C.Wait] Running Loop=1
2018-03-10T16:23:24.432Z,1520699004.432 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-03-10T16:23:24.533Z,1520699004.533 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:23:27.773Z,1520699007.773 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session.
2018-03-10T16:23:27.789Z,1520699007.789 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:23:27.941Z,1520699007.941 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:23:28.298Z,1520699008.298 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:23:28.698Z,1520699008.698 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:23:29.098Z,1520699009.098 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:23:29.497Z,1520699009.497 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:23:29.898Z,1520699009.898 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:23:30.296Z,1520699010.296 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:23:30.696Z,1520699010.696 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:23:31.097Z,1520699011.097 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:23:31.496Z,1520699011.496 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:23:31.933Z,1520699011.933 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:23:32.287Z,1520699012.287 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:23:32.688Z,1520699012.688 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:23:33.090Z,1520699013.090 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:23:33.491Z,1520699013.491 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:23:33.890Z,1520699013.890 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:23:34.295Z,1520699014.295 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:23:34.699Z,1520699014.699 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:23:35.102Z,1520699015.102 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:23:35.497Z,1520699015.497 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:23:35.894Z,1520699015.894 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:23:36.288Z,1520699016.288 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:23:36.695Z,1520699016.695 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:23:37.090Z,1520699017.090 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:23:37.495Z,1520699017.495 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:23:37.905Z,1520699017.905 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:23:38.295Z,1520699018.295 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:23:38.690Z,1520699018.690 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:23:39.090Z,1520699019.090 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:23:39.490Z,1520699019.490 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:23:39.961Z,1520699019.961 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:23:40.301Z,1520699020.301 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:23:40.696Z,1520699020.696 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:23:41.096Z,1520699021.096 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:23:41.504Z,1520699021.504 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:23:41.897Z,1520699021.897 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:23:42.296Z,1520699022.296 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:23:42.696Z,1520699022.696 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:23:43.099Z,1520699023.099 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:23:43.500Z,1520699023.500 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:23:43.888Z,1520699023.888 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:23:44.292Z,1520699024.292 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:23:44.689Z,1520699024.689 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:23:45.084Z,1520699025.084 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:23:45.492Z,1520699025.492 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:23:45.889Z,1520699025.889 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:23:46.289Z,1520699026.289 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:23:46.696Z,1520699026.696 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:23:47.091Z,1520699027.091 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:23:47.505Z,1520699027.505 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:23:47.889Z,1520699027.889 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:23:48.294Z,1520699028.294 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:23:48.692Z,1520699028.692 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:23:49.085Z,1520699029.085 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:23:49.502Z,1520699029.502 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:23:49.888Z,1520699029.888 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:23:50.285Z,1520699030.285 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:23:50.688Z,1520699030.688 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:23:51.088Z,1520699031.088 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:23:51.492Z,1520699031.492 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:23:51.891Z,1520699031.891 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:23:52.289Z,1520699032.289 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:23:52.684Z,1520699032.684 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:23:53.089Z,1520699033.089 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:23:53.492Z,1520699033.492 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:23:53.888Z,1520699033.888 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:23:54.289Z,1520699034.289 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:23:54.689Z,1520699034.689 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:23:55.088Z,1520699035.088 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:23:55.499Z,1520699035.499 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:23:55.900Z,1520699035.900 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:23:56.295Z,1520699036.295 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:23:56.697Z,1520699036.697 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:23:57.102Z,1520699037.102 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:23:57.495Z,1520699037.495 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:23:57.898Z,1520699037.898 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:23:58.281Z,1520699038.281 [NAL9602](INFO): Powering down
2018-03-10T16:23:58.300Z,1520699038.300 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:23:58.700Z,1520699038.700 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:23:59.101Z,1520699039.101 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:23:59.501Z,1520699039.501 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:23:59.884Z,1520699039.884 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:24:00.292Z,1520699040.292 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:24:00.700Z,1520699040.700 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:24:01.088Z,1520699041.088 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:24:01.489Z,1520699041.489 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:24:01.889Z,1520699041.889 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:24:02.293Z,1520699042.293 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:24:02.689Z,1520699042.689 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:24:03.093Z,1520699043.093 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:24:03.488Z,1520699043.488 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:24:03.898Z,1520699043.898 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:24:04.296Z,1520699044.296 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:24:04.700Z,1520699044.700 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:24:05.084Z,1520699045.084 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:24:05.488Z,1520699045.488 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:24:05.959Z,1520699045.959 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:24:06.292Z,1520699046.292 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:24:06.689Z,1520699046.689 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:24:07.083Z,1520699047.083 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:24:07.484Z,1520699047.484 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:24:07.887Z,1520699047.887 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:24:08.288Z,1520699048.288 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:24:08.694Z,1520699048.694 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:24:09.094Z,1520699049.094 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:24:09.497Z,1520699049.497 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:24:09.893Z,1520699049.893 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:24:10.294Z,1520699050.294 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:24:10.692Z,1520699050.692 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:24:11.084Z,1520699051.084 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:24:11.501Z,1520699051.501 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:24:11.884Z,1520699051.884 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:24:12.284Z,1520699052.284 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:24:12.692Z,1520699052.692 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:24:13.084Z,1520699053.084 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:24:13.486Z,1520699053.486 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:24:13.891Z,1520699053.891 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:24:14.284Z,1520699054.284 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:24:14.684Z,1520699054.684 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:24:15.088Z,1520699055.088 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:24:15.488Z,1520699055.488 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:24:15.900Z,1520699055.900 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:24:16.294Z,1520699056.294 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:24:16.693Z,1520699056.693 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:24:17.099Z,1520699057.099 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:24:17.497Z,1520699057.497 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:24:17.896Z,1520699057.896 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:24:18.293Z,1520699058.293 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:24:18.694Z,1520699058.694 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:24:19.092Z,1520699059.092 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:24:19.496Z,1520699059.496 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:24:19.897Z,1520699059.897 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:24:20.293Z,1520699060.293 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:24:20.691Z,1520699060.691 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:24:21.096Z,1520699061.096 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:24:21.493Z,1520699061.493 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:24:21.886Z,1520699061.886 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:24:22.292Z,1520699062.292 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:24:22.692Z,1520699062.692 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:24:23.085Z,1520699063.085 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:24:23.488Z,1520699063.488 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:24:23.888Z,1520699063.888 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:24:24.286Z,1520699064.286 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:24:24.697Z,1520699064.697 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:24:25.097Z,1520699065.097 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:24:28.298Z,1520699068.298 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:24:28.436Z,1520699068.436 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:24:28.797Z,1520699068.797 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:24:29.197Z,1520699069.197 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:24:29.596Z,1520699069.596 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:24:30.004Z,1520699070.004 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:24:30.401Z,1520699070.401 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:24:30.802Z,1520699070.802 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:24:31.200Z,1520699071.200 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:24:31.595Z,1520699071.595 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:24:31.998Z,1520699071.998 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:24:32.406Z,1520699072.406 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:24:32.801Z,1520699072.801 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:24:33.197Z,1520699073.197 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:24:33.596Z,1520699073.596 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:24:33.996Z,1520699073.996 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:24:34.396Z,1520699074.396 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:24:34.795Z,1520699074.795 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:24:35.196Z,1520699075.196 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:24:35.600Z,1520699075.600 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:24:35.996Z,1520699075.996 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:24:36.400Z,1520699076.400 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:24:36.797Z,1520699076.797 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:24:37.198Z,1520699077.198 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:24:37.600Z,1520699077.600 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:24:37.996Z,1520699077.996 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:24:38.408Z,1520699078.408 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:24:38.800Z,1520699078.800 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:24:39.196Z,1520699079.196 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:24:39.595Z,1520699079.595 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:24:40.000Z,1520699080.000 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:24:40.392Z,1520699080.392 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:24:40.799Z,1520699080.799 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:24:41.188Z,1520699081.188 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:24:41.588Z,1520699081.588 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:24:41.993Z,1520699081.993 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:24:42.385Z,1520699082.385 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:24:42.791Z,1520699082.791 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:24:43.209Z,1520699083.209 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:24:43.584Z,1520699083.584 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:24:43.988Z,1520699083.988 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:24:44.408Z,1520699084.408 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:24:44.788Z,1520699084.788 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:24:45.188Z,1520699085.188 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:24:45.608Z,1520699085.608 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:24:45.990Z,1520699085.990 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:24:46.398Z,1520699086.398 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:24:46.800Z,1520699086.800 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:24:47.201Z,1520699087.201 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:24:47.597Z,1520699087.597 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:24:47.992Z,1520699087.992 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:24:48.401Z,1520699088.401 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:24:48.805Z,1520699088.805 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:24:49.196Z,1520699089.196 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:24:49.597Z,1520699089.597 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:24:49.996Z,1520699089.996 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:24:50.408Z,1520699090.408 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:24:50.796Z,1520699090.796 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:24:51.184Z,1520699091.184 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:24:51.211Z,1520699091.211 [BPC1](ERROR): Failed to receive battery data
2018-03-10T16:24:51.211Z,1520699091.211 [BPC1] Communications Fault, FailCount= 1
2018-03-10T16:24:51.211Z,1520699091.211 [BPC1](ERROR): Communications Fault
2018-03-10T16:24:51.234Z,1520699091.234 [CBIT](ERROR): Communications Fault in component: BPC1
2018-03-10T16:24:51.602Z,1520699091.602 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:24:51.997Z,1520699091.997 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:24:52.386Z,1520699092.386 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:24:52.427Z,1520699092.427 [CBIT](INFO): Clearing failed state for component BPC1
2018-03-10T16:24:52.427Z,1520699092.427 [BPC1] No Fault, FailCount= 1
2018-03-10T16:24:52.794Z,1520699092.794 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:24:53.192Z,1520699093.192 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:24:53.586Z,1520699093.586 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:24:53.992Z,1520699093.992 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:24:54.388Z,1520699094.388 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:24:54.792Z,1520699094.792 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:24:55.188Z,1520699095.188 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:24:55.592Z,1520699095.592 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:24:55.983Z,1520699095.983 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:24:56.389Z,1520699096.389 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:24:56.796Z,1520699096.796 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:24:57.191Z,1520699097.191 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:24:57.600Z,1520699097.600 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:24:57.993Z,1520699097.993 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:24:58.389Z,1520699098.389 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:24:58.797Z,1520699098.797 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:24:59.196Z,1520699099.196 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:24:59.593Z,1520699099.593 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:24:59.994Z,1520699099.994 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:25:00.399Z,1520699100.399 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:25:00.799Z,1520699100.799 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:25:01.201Z,1520699101.201 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:25:01.599Z,1520699101.599 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:25:01.000Z,1520699102.000 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:25:02.396Z,1520699102.396 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:25:02.792Z,1520699102.792 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:25:03.194Z,1520699103.194 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:25:03.606Z,1520699103.606 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:25:03.984Z,1520699103.984 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:25:04.386Z,1520699104.386 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:25:04.808Z,1520699104.808 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:25:05.186Z,1520699105.186 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:25:05.585Z,1520699105.585 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:25:06.006Z,1520699106.006 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:25:06.384Z,1520699106.384 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:25:06.786Z,1520699106.786 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:25:07.188Z,1520699107.188 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:25:07.588Z,1520699107.588 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:25:07.989Z,1520699107.989 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:25:08.389Z,1520699108.389 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:25:08.784Z,1520699108.784 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:25:09.184Z,1520699109.184 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:25:09.588Z,1520699109.588 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:25:09.984Z,1520699109.984 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:25:10.386Z,1520699110.386 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:25:10.794Z,1520699110.794 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:25:11.188Z,1520699111.188 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:25:11.586Z,1520699111.586 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:25:11.988Z,1520699111.988 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:25:12.392Z,1520699112.392 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:25:12.793Z,1520699112.793 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:25:13.196Z,1520699113.196 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:25:13.584Z,1520699113.584 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:25:13.992Z,1520699113.992 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:25:14.388Z,1520699114.388 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:25:14.792Z,1520699114.792 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:25:15.183Z,1520699115.183 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:25:15.588Z,1520699115.588 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:25:15.988Z,1520699115.988 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:25:16.386Z,1520699116.386 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:25:16.800Z,1520699116.800 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:25:17.193Z,1520699117.193 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:25:17.594Z,1520699117.594 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:25:17.993Z,1520699117.993 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:25:18.395Z,1520699118.395 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:25:18.791Z,1520699118.791 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:25:19.194Z,1520699119.194 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:25:19.599Z,1520699119.599 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:25:19.995Z,1520699119.995 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:25:20.398Z,1520699120.398 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:25:20.420Z,1520699120.420 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T16:25:20.421Z,1520699120.421 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 145
2018-03-10T16:25:20.421Z,1520699120.421 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-10T16:25:20.454Z,1520699120.454 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-10T16:25:20.796Z,1520699120.796 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:25:20.825Z,1520699120.825 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-10T16:25:20.825Z,1520699120.825 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 145
2018-03-10T16:25:21.197Z,1520699121.197 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:25:21.215Z,1520699121.215 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-10T16:25:21.216Z,1520699121.216 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-10T16:25:21.216Z,1520699121.216 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-10T16:25:21.597Z,1520699121.597 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:25:21.984Z,1520699121.984 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:25:22.382Z,1520699122.382 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:25:22.788Z,1520699122.788 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:25:23.188Z,1520699123.188 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:25:23.209Z,1520699123.209 [BPC1](FAULT): Failed to initialize
2018-03-10T16:25:23.209Z,1520699123.209 [BPC1] Communications Fault, FailCount= 2
2018-03-10T16:25:23.209Z,1520699123.209 [BPC1](ERROR): Communications Fault
2018-03-10T16:25:23.231Z,1520699123.231 [CBIT](ERROR): Communications Fault in component: BPC1
2018-03-10T16:25:23.583Z,1520699123.583 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:25:23.992Z,1520699123.992 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:25:24.389Z,1520699124.389 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:25:24.444Z,1520699124.444 [CBIT](INFO): Clearing failed state for component BPC1
2018-03-10T16:25:24.444Z,1520699124.444 [BPC1] No Fault, FailCount= 2
2018-03-10T16:25:24.785Z,1520699124.785 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:25:25.189Z,1520699125.189 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:25:28.432Z,1520699128.432 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:25:28.541Z,1520699128.541 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:25:28.953Z,1520699128.953 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:25:29.341Z,1520699129.341 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:25:29.744Z,1520699129.744 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:25:30.144Z,1520699130.144 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:25:30.545Z,1520699130.545 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:25:30.941Z,1520699130.941 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:25:31.342Z,1520699131.342 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:25:31.745Z,1520699131.745 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:25:32.137Z,1520699132.137 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:25:32.542Z,1520699132.542 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:25:32.950Z,1520699132.950 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:25:33.341Z,1520699133.341 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:25:33.749Z,1520699133.749 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:25:34.132Z,1520699134.132 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:25:34.548Z,1520699134.548 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:25:34.956Z,1520699134.956 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:25:35.333Z,1520699135.333 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:25:35.737Z,1520699135.737 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:25:36.147Z,1520699136.147 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:25:36.546Z,1520699136.546 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:25:36.946Z,1520699136.946 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:25:37.342Z,1520699137.342 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:25:37.747Z,1520699137.747 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:25:38.142Z,1520699138.142 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:25:38.551Z,1520699138.551 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:25:38.933Z,1520699138.933 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:25:39.333Z,1520699139.333 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:25:39.749Z,1520699139.749 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:25:40.132Z,1520699140.132 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:25:40.530Z,1520699140.530 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:25:40.936Z,1520699140.936 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:25:41.357Z,1520699141.357 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:25:41.423Z,1520699141.423 [CBIT](DEBUG): EFC running - data check-sum false
2018-03-10T16:25:41.734Z,1520699141.734 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:25:42.136Z,1520699142.136 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:25:42.536Z,1520699142.536 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:25:42.940Z,1520699142.940 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:25:43.337Z,1520699143.337 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:25:43.732Z,1520699143.732 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:25:44.134Z,1520699144.134 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:25:44.540Z,1520699144.540 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:25:44.936Z,1520699144.936 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:25:45.375Z,1520699145.375 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:25:45.752Z,1520699145.752 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:25:46.146Z,1520699146.146 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:25:46.538Z,1520699146.538 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:25:46.946Z,1520699146.946 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:25:47.356Z,1520699147.356 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:25:47.743Z,1520699147.743 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:25:48.143Z,1520699148.143 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:25:48.544Z,1520699148.544 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:25:48.946Z,1520699148.946 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:25:49.343Z,1520699149.343 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:25:49.746Z,1520699149.746 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:25:50.147Z,1520699150.147 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:25:50.536Z,1520699150.536 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:25:50.936Z,1520699150.936 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:25:51.334Z,1520699151.334 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:25:51.736Z,1520699151.736 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:25:52.140Z,1520699152.140 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:25:52.534Z,1520699152.534 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:25:52.937Z,1520699152.937 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:25:53.340Z,1520699153.340 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:25:53.737Z,1520699153.737 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:25:54.152Z,1520699154.152 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:25:54.541Z,1520699154.541 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:25:54.949Z,1520699154.949 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:25:54.960Z,1520699154.960 [BPC1](FAULT): Failed to initialize
2018-03-10T16:25:54.960Z,1520699154.960 [BPC1] Communications Fault, FailCount= 3
2018-03-10T16:25:54.960Z,1520699154.960 [BPC1](ERROR): Communications Fault
2018-03-10T16:25:55.008Z,1520699155.008 [CBIT](ERROR): Communications Fault in component: BPC1
2018-03-10T16:25:55.357Z,1520699155.357 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:25:55.745Z,1520699155.745 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:25:56.149Z,1520699156.149 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:25:56.200Z,1520699156.200 [CBIT](INFO): Clearing failed state for component BPC1
2018-03-10T16:25:56.200Z,1520699156.200 [BPC1] No Fault, FailCount= 3
2018-03-10T16:25:56.557Z,1520699156.557 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:25:56.948Z,1520699156.948 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:25:57.348Z,1520699157.348 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:25:57.748Z,1520699157.748 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:25:58.137Z,1520699158.137 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:25:58.534Z,1520699158.534 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:25:58.940Z,1520699158.940 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:25:59.340Z,1520699159.340 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:25:59.734Z,1520699159.734 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:26:00.136Z,1520699160.136 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:26:00.556Z,1520699160.556 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:26:00.960Z,1520699160.960 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:26:01.336Z,1520699161.336 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:26:01.740Z,1520699161.740 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:26:02.134Z,1520699162.134 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:26:02.540Z,1520699162.540 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:26:02.936Z,1520699162.936 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:26:03.332Z,1520699163.332 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:26:03.736Z,1520699163.736 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:26:04.140Z,1520699164.140 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:26:04.534Z,1520699164.534 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:26:04.936Z,1520699164.936 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:26:05.337Z,1520699165.337 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:26:05.734Z,1520699165.734 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:26:06.141Z,1520699166.141 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:26:06.541Z,1520699166.541 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:26:06.942Z,1520699166.942 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:26:07.344Z,1520699167.344 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:26:07.745Z,1520699167.745 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:26:08.138Z,1520699168.138 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:26:08.552Z,1520699168.552 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:26:08.944Z,1520699168.944 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:26:09.345Z,1520699169.345 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:26:09.745Z,1520699169.745 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:26:10.148Z,1520699170.148 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:26:10.544Z,1520699170.544 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:26:10.944Z,1520699170.944 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:26:11.351Z,1520699171.351 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:26:11.744Z,1520699171.744 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:26:12.145Z,1520699172.145 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:26:12.545Z,1520699172.545 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:26:12.950Z,1520699172.950 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:26:13.354Z,1520699173.354 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:26:13.744Z,1520699173.744 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:26:14.149Z,1520699174.149 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:26:14.556Z,1520699174.556 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:26:14.945Z,1520699174.945 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:26:15.333Z,1520699175.333 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:26:15.737Z,1520699175.737 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:26:16.129Z,1520699176.129 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:26:16.536Z,1520699176.536 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:26:16.940Z,1520699176.940 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:26:17.337Z,1520699177.337 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:26:17.739Z,1520699177.739 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:26:18.145Z,1520699178.145 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:26:18.541Z,1520699178.541 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:26:18.945Z,1520699178.945 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:26:19.340Z,1520699179.340 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:26:19.744Z,1520699179.744 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:26:20.144Z,1520699180.144 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:26:20.542Z,1520699180.542 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:26:20.946Z,1520699180.946 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:26:21.344Z,1520699181.344 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:26:21.742Z,1520699181.742 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:26:22.140Z,1520699182.140 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:26:22.549Z,1520699182.549 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:26:22.942Z,1520699182.942 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:26:23.340Z,1520699183.340 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:26:23.748Z,1520699183.748 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:26:24.145Z,1520699184.145 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:26:24.541Z,1520699184.541 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:26:24.944Z,1520699184.944 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:26:25.345Z,1520699185.345 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:26:28.663Z,1520699188.663 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:26:28.672Z,1520699188.672 [BPC1](FAULT): Failed to initialize
2018-03-10T16:26:28.672Z,1520699188.672 [BPC1] Communications Fault, FailCount= 4
2018-03-10T16:26:28.672Z,1520699188.672 [BPC1](ERROR): Communications Fault
2018-03-10T16:26:28.750Z,1520699188.750 [CBIT](ERROR): Communications Fault in component: BPC1
2018-03-10T16:26:28.797Z,1520699188.797 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:26:29.200Z,1520699189.200 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:26:29.600Z,1520699189.600 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:26:29.652Z,1520699189.652 [CBIT](INFO): Clearing failed state for component BPC1
2018-03-10T16:26:29.652Z,1520699189.652 [BPC1] No Fault, FailCount= 4
2018-03-10T16:26:29.999Z,1520699189.999 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:26:30.404Z,1520699190.404 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:26:30.806Z,1520699190.806 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:26:31.196Z,1520699191.196 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:26:31.600Z,1520699191.600 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:26:32.004Z,1520699192.004 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:26:32.396Z,1520699192.396 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:26:32.810Z,1520699192.810 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:26:33.200Z,1520699193.200 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:26:33.601Z,1520699193.601 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:26:34.011Z,1520699194.011 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:26:34.404Z,1520699194.404 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:26:34.788Z,1520699194.788 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:26:35.199Z,1520699195.199 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:26:35.602Z,1520699195.602 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:26:35.988Z,1520699195.988 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:26:36.388Z,1520699196.388 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:26:36.804Z,1520699196.804 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:26:37.188Z,1520699197.188 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:26:37.611Z,1520699197.611 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:26:37.999Z,1520699197.999 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:26:38.401Z,1520699198.401 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:26:38.802Z,1520699198.802 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:26:39.189Z,1520699199.189 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:26:39.589Z,1520699199.589 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:26:39.994Z,1520699199.994 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:26:40.387Z,1520699200.387 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:26:40.797Z,1520699200.797 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:26:41.192Z,1520699201.192 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:26:41.590Z,1520699201.590 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:26:41.988Z,1520699201.988 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:26:42.397Z,1520699202.397 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:26:42.786Z,1520699202.786 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:26:43.196Z,1520699203.196 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:26:43.596Z,1520699203.596 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:26:44.000Z,1520699204.000 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:26:44.401Z,1520699204.401 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:26:44.800Z,1520699204.800 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:26:45.193Z,1520699205.193 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:26:45.596Z,1520699205.596 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:26:45.998Z,1520699205.998 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:26:46.397Z,1520699206.397 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:26:46.800Z,1520699206.800 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:26:47.202Z,1520699207.202 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:26:47.593Z,1520699207.593 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:26:47.997Z,1520699207.997 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:26:48.399Z,1520699208.399 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:26:48.792Z,1520699208.792 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:26:49.197Z,1520699209.197 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:26:49.600Z,1520699209.600 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:26:50.004Z,1520699210.004 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:26:50.403Z,1520699210.403 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:26:50.800Z,1520699210.800 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:26:51.192Z,1520699211.192 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:26:51.596Z,1520699211.596 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:26:52.006Z,1520699212.006 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:26:52.397Z,1520699212.397 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:26:52.796Z,1520699212.796 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:26:53.201Z,1520699213.201 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:26:53.603Z,1520699213.603 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:26:53.997Z,1520699213.997 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:26:54.404Z,1520699214.404 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:26:54.801Z,1520699214.801 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:26:55.194Z,1520699215.194 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:26:55.596Z,1520699215.596 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:26:55.996Z,1520699215.996 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:26:56.400Z,1520699216.400 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:26:56.805Z,1520699216.805 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:26:57.201Z,1520699217.201 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:26:57.601Z,1520699217.601 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:26:58.001Z,1520699218.001 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:26:58.400Z,1520699218.400 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:26:58.805Z,1520699218.805 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:26:59.210Z,1520699219.210 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:26:59.596Z,1520699219.596 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:27:00.004Z,1520699220.004 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:27:00.398Z,1520699220.398 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:27:00.796Z,1520699220.796 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:27:01.204Z,1520699221.204 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:27:01.601Z,1520699221.601 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:27:02.004Z,1520699222.004 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:27:02.404Z,1520699222.404 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:27:02.800Z,1520699222.800 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:27:03.198Z,1520699223.198 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:27:03.605Z,1520699223.605 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:27:03.996Z,1520699223.996 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:27:04.395Z,1520699224.395 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:27:04.810Z,1520699224.810 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:27:05.196Z,1520699225.196 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:27:05.589Z,1520699225.589 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:27:05.999Z,1520699225.999 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:27:06.396Z,1520699226.396 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:27:06.788Z,1520699226.788 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:27:07.192Z,1520699227.192 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:27:07.592Z,1520699227.592 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:27:07.988Z,1520699227.988 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:27:08.409Z,1520699228.409 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:27:08.792Z,1520699228.792 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:27:09.192Z,1520699229.192 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:27:09.597Z,1520699229.597 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:27:09.992Z,1520699229.992 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:27:10.396Z,1520699230.396 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:27:10.793Z,1520699230.793 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:27:11.196Z,1520699231.196 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:27:11.600Z,1520699231.600 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:27:12.005Z,1520699232.005 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:27:12.405Z,1520699232.405 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:27:12.800Z,1520699232.800 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:27:13.202Z,1520699233.202 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:27:13.596Z,1520699233.596 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:27:13.995Z,1520699233.995 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:27:14.398Z,1520699234.398 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:27:14.805Z,1520699234.805 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:27:15.203Z,1520699235.203 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:27:15.597Z,1520699235.597 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:27:16.006Z,1520699236.006 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:27:16.397Z,1520699236.397 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:27:16.806Z,1520699236.806 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:27:17.202Z,1520699237.202 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:27:17.602Z,1520699237.602 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:27:18.005Z,1520699238.005 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:27:18.412Z,1520699238.412 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:27:18.788Z,1520699238.788 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:27:19.204Z,1520699239.204 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:27:19.611Z,1520699239.611 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:27:20.006Z,1520699240.006 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:27:20.404Z,1520699240.404 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:27:20.792Z,1520699240.792 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:27:21.204Z,1520699241.204 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:27:21.604Z,1520699241.604 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:27:21.993Z,1520699241.993 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:27:22.388Z,1520699242.388 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:27:22.795Z,1520699242.795 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:27:23.192Z,1520699243.192 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:27:23.592Z,1520699243.592 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:27:23.988Z,1520699243.988 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:27:24.391Z,1520699244.391 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:27:24.793Z,1520699244.793 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:27:25.196Z,1520699245.196 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:27:25.595Z,1520699245.595 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:27:28.735Z,1520699248.735 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:27:28.853Z,1520699248.853 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:27:29.248Z,1520699249.248 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:27:29.642Z,1520699249.642 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:27:30.045Z,1520699250.045 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:27:30.444Z,1520699250.444 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:27:30.849Z,1520699250.849 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:27:31.244Z,1520699251.244 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:27:31.645Z,1520699251.645 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:27:32.047Z,1520699252.047 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:27:32.442Z,1520699252.442 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:27:32.849Z,1520699252.849 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:27:33.243Z,1520699253.243 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:27:33.644Z,1520699253.644 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:27:34.041Z,1520699254.041 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:27:34.448Z,1520699254.448 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:27:34.845Z,1520699254.845 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:27:35.241Z,1520699255.241 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:27:35.650Z,1520699255.650 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:27:36.045Z,1520699256.045 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:27:36.445Z,1520699256.445 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:27:36.849Z,1520699256.849 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:27:37.233Z,1520699257.233 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:27:37.637Z,1520699257.637 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:27:38.032Z,1520699258.032 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:27:38.441Z,1520699258.441 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:27:38.836Z,1520699258.836 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:27:39.236Z,1520699259.236 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:27:39.641Z,1520699259.641 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:27:40.041Z,1520699260.041 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:27:40.444Z,1520699260.444 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:27:40.841Z,1520699260.841 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:27:41.241Z,1520699261.241 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:27:41.640Z,1520699261.640 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:27:42.045Z,1520699262.045 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:27:42.445Z,1520699262.445 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:27:42.844Z,1520699262.844 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:27:43.244Z,1520699263.244 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:27:43.642Z,1520699263.642 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:27:44.043Z,1520699264.043 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:27:44.435Z,1520699264.435 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:27:44.837Z,1520699264.837 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:27:45.240Z,1520699265.240 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:27:45.632Z,1520699265.632 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:27:46.036Z,1520699266.036 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:27:46.435Z,1520699266.435 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:27:46.840Z,1520699266.840 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:27:47.255Z,1520699267.255 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:27:47.642Z,1520699267.642 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:27:48.046Z,1520699268.046 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:27:48.446Z,1520699268.446 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:27:48.838Z,1520699268.838 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:27:49.233Z,1520699269.233 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:27:49.668Z,1520699269.668 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:27:50.066Z,1520699270.066 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:27:50.442Z,1520699270.442 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:27:50.856Z,1520699270.856 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:27:51.236Z,1520699271.236 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:27:51.638Z,1520699271.638 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:27:52.041Z,1520699272.041 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:27:52.440Z,1520699272.440 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:27:52.842Z,1520699272.842 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:27:53.247Z,1520699273.247 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:27:53.632Z,1520699273.632 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:27:54.032Z,1520699274.032 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:27:54.448Z,1520699274.448 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:27:54.836Z,1520699274.836 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:27:55.248Z,1520699275.248 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:27:55.636Z,1520699275.636 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:27:56.036Z,1520699276.036 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:27:56.436Z,1520699276.436 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:27:56.847Z,1520699276.847 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:27:57.236Z,1520699277.236 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:27:57.636Z,1520699277.636 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:27:58.037Z,1520699278.037 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:27:58.437Z,1520699278.437 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:27:58.851Z,1520699278.851 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:27:59.237Z,1520699279.237 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:27:59.632Z,1520699279.632 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:28:00.052Z,1520699280.052 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:28:00.436Z,1520699280.436 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:28:00.836Z,1520699280.836 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:28:01.232Z,1520699281.232 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:28:01.653Z,1520699281.653 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:28:02.032Z,1520699282.032 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:28:02.436Z,1520699282.436 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:28:02.836Z,1520699282.836 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:28:03.236Z,1520699283.236 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:28:03.637Z,1520699283.637 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:28:04.056Z,1520699284.056 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:28:04.432Z,1520699284.432 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:28:04.835Z,1520699284.835 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:28:05.235Z,1520699285.235 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:28:05.632Z,1520699285.632 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:28:06.032Z,1520699286.032 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:28:06.440Z,1520699286.440 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:28:06.840Z,1520699286.840 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:28:07.232Z,1520699287.232 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:28:07.640Z,1520699287.640 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:28:08.036Z,1520699288.036 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:28:08.433Z,1520699288.433 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:28:08.836Z,1520699288.836 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:28:09.236Z,1520699289.236 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:28:09.636Z,1520699289.636 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:28:10.052Z,1520699290.052 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:28:10.441Z,1520699290.441 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:28:10.844Z,1520699290.844 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:28:11.246Z,1520699291.246 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:28:11.641Z,1520699291.641 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:28:12.040Z,1520699292.040 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:28:12.439Z,1520699292.439 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:28:12.840Z,1520699292.840 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:28:13.243Z,1520699293.243 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:28:13.640Z,1520699293.640 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:28:14.044Z,1520699294.044 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:28:14.440Z,1520699294.440 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:28:14.843Z,1520699294.843 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:28:15.257Z,1520699295.257 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:28:15.644Z,1520699295.644 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:28:16.042Z,1520699296.042 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:28:16.444Z,1520699296.444 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:28:16.844Z,1520699296.844 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:28:17.244Z,1520699297.244 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:28:17.653Z,1520699297.653 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:28:18.041Z,1520699298.041 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:28:18.440Z,1520699298.440 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:28:18.848Z,1520699298.848 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:28:19.234Z,1520699299.234 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:28:19.636Z,1520699299.636 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:28:20.037Z,1520699300.037 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:28:20.448Z,1520699300.448 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:28:20.836Z,1520699300.836 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:28:21.248Z,1520699301.248 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:28:21.272Z,1520699301.272 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T16:28:21.272Z,1520699301.272 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 146
2018-03-10T16:28:21.273Z,1520699301.273 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-10T16:28:21.285Z,1520699301.285 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-10T16:28:21.636Z,1520699301.636 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:28:21.676Z,1520699301.676 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-10T16:28:21.676Z,1520699301.676 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 146
2018-03-10T16:28:22.036Z,1520699302.036 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:28:22.075Z,1520699302.075 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-10T16:28:22.076Z,1520699302.076 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-10T16:28:22.076Z,1520699302.076 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-10T16:28:22.436Z,1520699302.436 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:28:22.840Z,1520699302.840 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:28:23.255Z,1520699303.255 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:28:23.635Z,1520699303.635 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:28:24.036Z,1520699304.036 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:28:24.436Z,1520699304.436 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:28:24.837Z,1520699304.837 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:28:24.869Z,1520699304.869 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-03-10T16:28:24.870Z,1520699304.870 [Default:CheckIn:C.Wait] Stopped
2018-03-10T16:28:24.870Z,1520699304.870 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-03-10T16:28:24.870Z,1520699304.870 [Default:CheckIn:D] Running Loop=1
2018-03-10T16:28:25.236Z,1520699305.236 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:28:25.268Z,1520699305.268 [Default:CheckIn:D] Stopped
2018-03-10T16:28:25.268Z,1520699305.268 [Default:CheckIn:E] Running Loop=1
2018-03-10T16:28:25.655Z,1520699305.655 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:28:25.682Z,1520699305.682 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 669.122461 min 
2018-03-10T16:28:25.682Z,1520699305.682 [Default:CheckIn:E] Stopped
2018-03-10T16:28:25.682Z,1520699305.682 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-03-10T16:28:25.682Z,1520699305.682 [Default:CheckIn] Stopped
2018-03-10T16:28:25.683Z,1520699305.683 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-03-10T16:28:25.683Z,1520699305.683 [Default:CheckIn](INFO): Running loop #66
2018-03-10T16:28:25.683Z,1520699305.683 [Default:CheckIn] Running Loop=66
2018-03-10T16:28:25.683Z,1520699305.683 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-03-10T16:28:25.683Z,1520699305.683 [Default:CheckIn:Read_GPS] Running Loop=1
2018-03-10T16:28:28.877Z,1520699308.877 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:28:28.990Z,1520699308.990 [NAL9602](INFO): Powering up
2018-03-10T16:28:29.020Z,1520699309.020 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:28:29.420Z,1520699309.420 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:28:29.812Z,1520699309.812 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:28:30.214Z,1520699310.214 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:28:30.611Z,1520699310.611 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:28:31.022Z,1520699311.022 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:28:31.416Z,1520699311.416 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:28:31.817Z,1520699311.817 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:28:32.216Z,1520699312.216 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:28:32.616Z,1520699312.616 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:28:33.013Z,1520699313.013 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:28:33.416Z,1520699313.416 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:28:33.800Z,1520699313.800 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:28:34.211Z,1520699314.211 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:28:34.613Z,1520699314.613 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:28:35.012Z,1520699315.012 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:28:35.416Z,1520699315.416 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:28:35.809Z,1520699315.809 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:28:36.221Z,1520699316.221 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:28:36.611Z,1520699316.611 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:28:37.010Z,1520699317.010 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:28:37.413Z,1520699317.413 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:28:37.812Z,1520699317.812 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:28:38.212Z,1520699318.212 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:28:38.612Z,1520699318.612 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:28:39.017Z,1520699319.017 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:28:39.422Z,1520699319.422 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:28:39.792Z,1520699319.792 [NAL9602](INFO): NAL9602 initialized
2018-03-10T16:28:39.819Z,1520699319.819 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:28:40.216Z,1520699320.216 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:28:40.623Z,1520699320.623 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:28:41.028Z,1520699321.028 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:28:41.427Z,1520699321.427 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:28:41.806Z,1520699321.806 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:28:42.205Z,1520699322.205 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:28:42.605Z,1520699322.605 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:28:43.009Z,1520699323.009 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:28:43.410Z,1520699323.410 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:28:43.812Z,1520699323.812 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:28:44.210Z,1520699324.210 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:28:44.610Z,1520699324.610 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:28:45.014Z,1520699325.014 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:28:45.414Z,1520699325.414 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:28:45.810Z,1520699325.810 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:28:46.217Z,1520699326.217 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:28:46.614Z,1520699326.614 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:28:47.012Z,1520699327.012 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:28:47.412Z,1520699327.412 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:28:47.823Z,1520699327.823 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:28:48.204Z,1520699328.204 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:28:48.613Z,1520699328.613 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:28:49.013Z,1520699329.013 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:28:49.408Z,1520699329.408 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:28:49.825Z,1520699329.825 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:28:50.222Z,1520699330.222 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:28:50.612Z,1520699330.612 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:28:51.004Z,1520699331.004 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:28:51.405Z,1520699331.405 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:28:51.806Z,1520699331.806 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:28:52.223Z,1520699332.223 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:28:52.601Z,1520699332.601 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:28:53.005Z,1520699333.005 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:28:53.409Z,1520699333.409 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:28:53.805Z,1520699333.805 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:28:54.210Z,1520699334.210 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:28:54.610Z,1520699334.610 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:28:55.009Z,1520699335.009 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:28:55.414Z,1520699335.414 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:28:55.811Z,1520699335.811 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:28:56.210Z,1520699336.210 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:28:56.612Z,1520699336.612 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:28:57.012Z,1520699337.012 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:28:57.413Z,1520699337.413 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:28:57.813Z,1520699337.813 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:28:58.218Z,1520699338.218 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:28:58.617Z,1520699338.617 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:28:59.012Z,1520699339.012 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:28:59.416Z,1520699339.416 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:28:59.817Z,1520699339.817 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:29:00.217Z,1520699340.217 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:29:00.622Z,1520699340.622 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:29:01.013Z,1520699341.013 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:29:01.420Z,1520699341.420 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:29:01.812Z,1520699341.812 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:29:02.215Z,1520699342.215 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:29:02.600Z,1520699342.600 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:29:03.012Z,1520699343.012 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:29:03.412Z,1520699343.412 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:29:03.811Z,1520699343.811 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:29:04.208Z,1520699344.208 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:29:04.618Z,1520699344.618 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:29:05.006Z,1520699345.006 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:29:05.404Z,1520699345.404 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:29:05.805Z,1520699345.805 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:29:06.209Z,1520699346.209 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:29:06.605Z,1520699346.605 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:29:07.006Z,1520699347.006 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:29:07.414Z,1520699347.414 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:29:07.819Z,1520699347.819 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:29:08.213Z,1520699348.213 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:29:08.617Z,1520699348.617 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:29:09.008Z,1520699349.008 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:29:09.413Z,1520699349.413 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:29:09.817Z,1520699349.817 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:29:10.208Z,1520699350.208 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:29:10.617Z,1520699350.617 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:29:11.005Z,1520699351.005 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:29:11.407Z,1520699351.407 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:29:11.784Z,1520699351.784 [NAL9602](ERROR): Failed to receive proper response when querying signal strength for MT queue check.
2018-03-10T16:29:11.867Z,1520699351.867 [NAL9602](FAULT): received: 
+CSQ:0

OK35, 0, 0, 0, 0

OK
2018-03-10T16:29:11.867Z,1520699351.867 [NAL9602] Data Fault, FailCount= 5
2018-03-10T16:29:11.867Z,1520699351.867 [NAL9602](ERROR): Data Fault
2018-03-10T16:29:11.884Z,1520699351.884 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:29:11.962Z,1520699351.962 [CBIT](ERROR): Data Fault in component: NAL9602
2018-03-10T16:29:11.962Z,1520699351.962 [CBIT](CRITICAL): Data Fault in component: NAL9602
2018-03-10T16:29:12.188Z,1520699352.188 [NAL9602](INFO): Powering down
2018-03-10T16:29:12.205Z,1520699352.205 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:29:12.258Z,1520699352.258 [CBIT](INFO): Critical error at 20180310T162911
2018-03-10T16:29:12.604Z,1520699352.604 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:29:13.012Z,1520699353.012 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:29:13.409Z,1520699353.409 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:29:13.809Z,1520699353.809 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:29:14.212Z,1520699354.212 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:29:14.610Z,1520699354.610 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:29:15.011Z,1520699355.011 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:29:15.411Z,1520699355.411 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:29:15.813Z,1520699355.813 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:29:16.210Z,1520699356.210 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:29:16.612Z,1520699356.612 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:29:17.008Z,1520699357.008 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:29:17.419Z,1520699357.419 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:29:17.815Z,1520699357.815 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:29:18.208Z,1520699358.208 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:29:18.608Z,1520699358.608 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:29:19.015Z,1520699359.015 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:29:19.408Z,1520699359.408 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:29:19.824Z,1520699359.824 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:29:20.200Z,1520699360.200 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:29:20.608Z,1520699360.608 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:29:21.004Z,1520699361.004 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:29:21.404Z,1520699361.404 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:29:21.808Z,1520699361.808 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:29:22.204Z,1520699362.204 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:29:22.601Z,1520699362.601 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:29:23.008Z,1520699363.008 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:29:23.405Z,1520699363.405 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:29:23.819Z,1520699363.819 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:29:24.204Z,1520699364.204 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:29:24.624Z,1520699364.624 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:29:25.004Z,1520699365.004 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:29:25.408Z,1520699365.408 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:29:25.804Z,1520699365.804 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:29:29.076Z,1520699369.076 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:29:29.225Z,1520699369.225 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:29:29.592Z,1520699369.592 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:29:29.992Z,1520699369.992 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:29:30.392Z,1520699370.392 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:29:30.788Z,1520699370.788 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:29:31.192Z,1520699371.192 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:29:31.596Z,1520699371.596 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:29:31.993Z,1520699371.993 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:29:32.388Z,1520699372.388 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:29:32.795Z,1520699372.795 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:29:33.204Z,1520699373.204 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:29:33.598Z,1520699373.598 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:29:34.002Z,1520699374.002 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:29:34.405Z,1520699374.405 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:29:34.781Z,1520699374.781 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:29:35.205Z,1520699375.205 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:29:35.592Z,1520699375.592 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:29:35.995Z,1520699375.995 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:29:36.392Z,1520699376.392 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:29:36.792Z,1520699376.792 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:29:37.199Z,1520699377.199 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:29:37.592Z,1520699377.592 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:29:37.992Z,1520699377.992 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:29:38.385Z,1520699378.385 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:29:38.792Z,1520699378.792 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:29:39.196Z,1520699379.196 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:29:39.584Z,1520699379.584 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:29:40.007Z,1520699380.007 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:29:40.395Z,1520699380.395 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:29:40.796Z,1520699380.796 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:29:41.200Z,1520699381.200 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:29:41.607Z,1520699381.607 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:29:41.988Z,1520699381.988 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:29:42.388Z,1520699382.388 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:29:42.788Z,1520699382.788 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:29:43.188Z,1520699383.188 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:29:43.593Z,1520699383.593 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:29:43.988Z,1520699383.988 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:29:44.384Z,1520699384.384 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:29:44.792Z,1520699384.792 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:29:45.188Z,1520699385.188 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:29:45.584Z,1520699385.584 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:29:45.988Z,1520699385.988 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:29:46.396Z,1520699386.396 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:29:46.790Z,1520699386.790 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:29:47.200Z,1520699387.200 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:29:47.611Z,1520699387.611 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:29:48.010Z,1520699388.010 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:29:48.390Z,1520699388.390 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:29:48.799Z,1520699388.799 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:29:49.189Z,1520699389.189 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:29:49.588Z,1520699389.588 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:29:49.988Z,1520699389.988 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:29:50.403Z,1520699390.403 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:29:50.801Z,1520699390.801 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:29:51.191Z,1520699391.191 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:29:51.589Z,1520699391.589 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:29:51.990Z,1520699391.990 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:29:52.388Z,1520699392.388 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:29:52.793Z,1520699392.793 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:29:53.196Z,1520699393.196 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:29:53.600Z,1520699393.600 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:29:53.993Z,1520699393.993 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:29:54.396Z,1520699394.396 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:29:54.796Z,1520699394.796 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:29:55.197Z,1520699395.197 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:29:55.594Z,1520699395.594 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:29:55.993Z,1520699395.993 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:29:56.395Z,1520699396.395 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:29:56.791Z,1520699396.791 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:29:57.205Z,1520699397.205 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:29:57.591Z,1520699397.591 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:29:57.999Z,1520699397.999 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:29:58.396Z,1520699398.396 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:29:58.796Z,1520699398.796 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:29:59.191Z,1520699399.191 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:29:59.605Z,1520699399.605 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:29:59.996Z,1520699399.996 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:30:00.392Z,1520699400.392 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:30:00.796Z,1520699400.796 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:30:01.195Z,1520699401.195 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:30:01.600Z,1520699401.600 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:30:01.992Z,1520699401.992 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:30:02.392Z,1520699402.392 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:30:02.796Z,1520699402.796 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:30:03.200Z,1520699403.200 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:30:03.596Z,1520699403.596 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:30:03.996Z,1520699403.996 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:30:04.396Z,1520699404.396 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:30:04.794Z,1520699404.794 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:30:05.206Z,1520699405.206 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:30:05.608Z,1520699405.608 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:30:05.996Z,1520699405.996 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:30:06.388Z,1520699406.388 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:30:06.800Z,1520699406.800 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:30:07.184Z,1520699407.184 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:30:07.588Z,1520699407.588 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:30:07.988Z,1520699407.988 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:30:08.384Z,1520699408.384 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:30:08.788Z,1520699408.788 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:30:09.192Z,1520699409.192 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:30:09.588Z,1520699409.588 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:30:09.984Z,1520699409.984 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:30:10.392Z,1520699410.392 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:30:10.784Z,1520699410.784 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:30:11.184Z,1520699411.184 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:30:11.588Z,1520699411.588 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:30:11.992Z,1520699411.992 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:30:12.386Z,1520699412.386 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:30:12.788Z,1520699412.788 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:30:13.196Z,1520699413.196 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:30:13.588Z,1520699413.588 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:30:13.993Z,1520699413.993 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:30:14.394Z,1520699414.394 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:30:14.793Z,1520699414.793 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:30:15.204Z,1520699415.204 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:30:15.595Z,1520699415.595 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:30:15.996Z,1520699415.996 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:30:16.392Z,1520699416.392 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:30:16.799Z,1520699416.799 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:30:17.200Z,1520699417.200 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:30:17.588Z,1520699417.588 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:30:17.984Z,1520699417.984 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:30:18.388Z,1520699418.388 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:30:18.788Z,1520699418.788 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:30:19.188Z,1520699419.188 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:30:19.592Z,1520699419.592 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:30:19.988Z,1520699419.988 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:30:20.392Z,1520699420.392 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:30:20.796Z,1520699420.796 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:30:21.193Z,1520699421.193 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:30:21.595Z,1520699421.595 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:30:21.994Z,1520699421.994 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:30:22.396Z,1520699422.396 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:30:22.795Z,1520699422.795 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:30:23.199Z,1520699423.199 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:30:23.596Z,1520699423.596 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:30:23.997Z,1520699423.997 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:30:24.392Z,1520699424.392 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:30:24.795Z,1520699424.795 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:30:25.191Z,1520699425.191 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:30:25.592Z,1520699425.592 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:30:25.997Z,1520699425.997 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:30:29.308Z,1520699429.308 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:30:29.422Z,1520699429.422 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:30:29.813Z,1520699429.813 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:30:30.207Z,1520699430.207 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:30:30.621Z,1520699430.621 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:30:31.008Z,1520699431.008 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:30:31.403Z,1520699431.403 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:30:31.807Z,1520699431.807 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:30:32.207Z,1520699432.207 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:30:32.607Z,1520699432.607 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:30:33.007Z,1520699433.007 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:30:33.404Z,1520699433.404 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:30:33.807Z,1520699433.807 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:30:34.208Z,1520699434.208 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:30:34.616Z,1520699434.616 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:30:34.000Z,1520699435.000 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:30:35.393Z,1520699435.393 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:30:35.800Z,1520699435.800 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:30:36.200Z,1520699436.200 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:30:36.601Z,1520699436.601 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:30:37.024Z,1520699437.024 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:30:37.400Z,1520699437.400 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:30:37.797Z,1520699437.797 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:30:38.220Z,1520699438.220 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:30:38.600Z,1520699438.600 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:30:39.000Z,1520699439.000 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:30:39.412Z,1520699439.412 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:30:39.800Z,1520699439.800 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:30:40.204Z,1520699440.204 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:30:40.603Z,1520699440.603 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:30:41.004Z,1520699441.004 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:30:41.408Z,1520699441.408 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:30:41.805Z,1520699441.805 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:30:42.210Z,1520699442.210 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:30:42.608Z,1520699442.608 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:30:43.007Z,1520699443.007 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:30:43.408Z,1520699443.408 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:30:43.808Z,1520699443.808 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:30:44.213Z,1520699444.213 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:30:44.608Z,1520699444.608 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:30:45.007Z,1520699445.007 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:30:45.419Z,1520699445.419 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:30:45.807Z,1520699445.807 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:30:46.212Z,1520699446.212 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:30:46.607Z,1520699446.607 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:30:47.000Z,1520699447.000 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:30:47.397Z,1520699447.397 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:30:47.804Z,1520699447.804 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:30:48.200Z,1520699448.200 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:30:48.604Z,1520699448.604 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:30:49.000Z,1520699449.000 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:30:49.400Z,1520699449.400 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:30:49.800Z,1520699449.800 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:30:50.200Z,1520699450.200 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:30:50.600Z,1520699450.600 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:30:51.001Z,1520699451.001 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:30:51.400Z,1520699451.400 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:30:51.804Z,1520699451.804 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:30:52.200Z,1520699452.200 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:30:52.600Z,1520699452.600 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:30:53.004Z,1520699453.004 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:30:53.400Z,1520699453.400 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:30:53.804Z,1520699453.804 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:30:54.200Z,1520699454.200 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:30:54.600Z,1520699454.600 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:30:55.004Z,1520699455.004 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:30:55.404Z,1520699455.404 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:30:55.805Z,1520699455.805 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:30:56.205Z,1520699456.205 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:30:56.609Z,1520699456.609 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:30:57.009Z,1520699457.009 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:30:57.407Z,1520699457.407 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:30:57.807Z,1520699457.807 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:30:58.210Z,1520699458.210 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:30:58.607Z,1520699458.607 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:30:59.010Z,1520699459.010 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:30:59.405Z,1520699459.405 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:30:59.811Z,1520699459.811 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:31:00.212Z,1520699460.212 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:31:00.613Z,1520699460.613 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:31:01.008Z,1520699461.008 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:31:01.415Z,1520699461.415 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:31:01.797Z,1520699461.797 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:31:02.216Z,1520699462.216 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:31:02.621Z,1520699462.621 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:31:03.001Z,1520699463.001 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:31:03.400Z,1520699463.400 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:31:03.801Z,1520699463.801 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:31:04.200Z,1520699464.200 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:31:04.600Z,1520699464.600 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:31:05.012Z,1520699465.012 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:31:05.412Z,1520699465.412 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:31:05.800Z,1520699465.800 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:31:06.212Z,1520699466.212 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:31:06.616Z,1520699466.616 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:31:07.000Z,1520699467.000 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:31:07.413Z,1520699467.413 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:31:07.820Z,1520699467.820 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:31:08.200Z,1520699468.200 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:31:08.612Z,1520699468.612 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:31:08.000Z,1520699469.000 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:31:09.400Z,1520699469.400 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:31:09.804Z,1520699469.804 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:31:10.200Z,1520699470.200 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:31:10.600Z,1520699470.600 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:31:11.004Z,1520699471.004 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:31:11.400Z,1520699471.400 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:31:11.812Z,1520699471.812 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:31:11.868Z,1520699471.868 [CBIT](INFO): Clearing failed state for component NAL9602
2018-03-10T16:31:11.868Z,1520699471.868 [NAL9602] No Fault, FailCount= 5
2018-03-10T16:31:12.190Z,1520699472.190 [NAL9602](INFO): Powering up NAL9602
2018-03-10T16:31:12.207Z,1520699472.207 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:31:12.608Z,1520699472.608 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:31:13.008Z,1520699473.008 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:31:13.409Z,1520699473.409 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:31:13.808Z,1520699473.808 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:31:14.210Z,1520699474.210 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:31:14.609Z,1520699474.609 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:31:15.008Z,1520699475.008 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:31:15.408Z,1520699475.408 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:31:15.813Z,1520699475.813 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:31:16.208Z,1520699476.208 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:31:16.608Z,1520699476.608 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:31:17.009Z,1520699477.009 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:31:17.409Z,1520699477.409 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:31:17.809Z,1520699477.809 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:31:18.208Z,1520699478.208 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:31:18.605Z,1520699478.605 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:31:19.018Z,1520699479.018 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:31:19.416Z,1520699479.416 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:31:19.809Z,1520699479.809 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:31:20.202Z,1520699480.202 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:31:20.616Z,1520699480.616 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:31:21.017Z,1520699481.017 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:31:21.408Z,1520699481.408 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:31:21.809Z,1520699481.809 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:31:22.208Z,1520699482.208 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:31:22.269Z,1520699482.269 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T16:31:22.269Z,1520699482.269 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 147
2018-03-10T16:31:22.269Z,1520699482.269 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-10T16:31:22.282Z,1520699482.282 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-10T16:31:22.619Z,1520699482.619 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:31:22.647Z,1520699482.647 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-10T16:31:22.647Z,1520699482.647 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 147
2018-03-10T16:31:23.020Z,1520699483.020 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:31:23.044Z,1520699483.044 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-10T16:31:23.044Z,1520699483.044 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-10T16:31:23.044Z,1520699483.044 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-10T16:31:23.384Z,1520699483.384 [NAL9602](INFO): NAL9602 initialized
2018-03-10T16:31:23.401Z,1520699483.401 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:31:23.820Z,1520699483.820 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:31:24.184Z,1520699484.184 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-03-10T16:31:24.184Z,1520699484.184 [NAL9602] Data Fault, FailCount= 1
2018-03-10T16:31:24.184Z,1520699484.184 [NAL9602](ERROR): Data Fault
2018-03-10T16:31:24.208Z,1520699484.208 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:31:24.267Z,1520699484.267 [CBIT](ERROR): Data Fault in component: NAL9602
2018-03-10T16:31:24.584Z,1520699484.584 [NAL9602](INFO): Powering down
2018-03-10T16:31:24.609Z,1520699484.609 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:31:25.008Z,1520699485.008 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:31:25.409Z,1520699485.409 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:31:25.440Z,1520699485.440 [CBIT](INFO): Clearing failed state for component NAL9602
2018-03-10T16:31:25.440Z,1520699485.440 [NAL9602] No Fault, FailCount= 1
2018-03-10T16:31:25.808Z,1520699485.808 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:31:26.208Z,1520699486.208 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:31:29.457Z,1520699489.457 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:31:29.576Z,1520699489.576 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:31:29.944Z,1520699489.944 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:31:30.354Z,1520699490.354 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:31:30.742Z,1520699490.742 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:31:31.134Z,1520699491.134 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:31:31.537Z,1520699491.537 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:31:31.937Z,1520699491.937 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:31:32.330Z,1520699492.330 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:31:32.721Z,1520699492.721 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:31:33.128Z,1520699493.128 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:31:33.522Z,1520699493.522 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:31:33.922Z,1520699493.922 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:31:34.377Z,1520699494.377 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:31:34.760Z,1520699494.760 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:31:35.130Z,1520699495.130 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:31:35.540Z,1520699495.540 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:31:35.964Z,1520699495.964 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:31:36.353Z,1520699496.353 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:31:36.731Z,1520699496.731 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:31:37.142Z,1520699497.142 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:31:37.544Z,1520699497.544 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:31:37.936Z,1520699497.936 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:31:38.347Z,1520699498.347 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:31:38.725Z,1520699498.725 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:31:39.133Z,1520699499.133 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:31:39.536Z,1520699499.536 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:31:39.932Z,1520699499.932 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:31:40.327Z,1520699500.327 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:31:40.731Z,1520699500.731 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:31:41.127Z,1520699501.127 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:31:41.544Z,1520699501.544 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:31:41.938Z,1520699501.938 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:31:42.339Z,1520699502.339 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:31:42.746Z,1520699502.746 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:31:43.157Z,1520699503.157 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:31:43.557Z,1520699503.557 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:31:43.917Z,1520699503.917 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:31:44.341Z,1520699504.341 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:31:44.747Z,1520699504.747 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:31:45.130Z,1520699505.130 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:31:45.540Z,1520699505.540 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:31:45.931Z,1520699505.931 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:31:46.333Z,1520699506.333 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:31:46.746Z,1520699506.746 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:31:47.130Z,1520699507.130 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:31:47.529Z,1520699507.529 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:31:47.932Z,1520699507.932 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:31:48.323Z,1520699508.323 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:31:48.782Z,1520699508.782 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:31:49.154Z,1520699509.154 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:31:49.533Z,1520699509.533 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:31:49.940Z,1520699509.940 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:31:50.346Z,1520699510.346 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:31:50.725Z,1520699510.725 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:31:51.159Z,1520699511.159 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:31:51.539Z,1520699511.539 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:31:51.954Z,1520699511.954 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:31:52.334Z,1520699512.334 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:31:52.736Z,1520699512.736 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:31:53.125Z,1520699513.125 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:31:53.534Z,1520699513.534 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:31:53.938Z,1520699513.938 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:31:54.326Z,1520699514.326 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:31:54.711Z,1520699514.711 [NAL9602](INFO): Powering up NAL9602
2018-03-10T16:31:54.735Z,1520699514.735 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:31:55.132Z,1520699515.132 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:31:55.533Z,1520699515.533 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:31:55.961Z,1520699515.961 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:31:56.340Z,1520699516.340 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:31:56.739Z,1520699516.739 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:31:57.142Z,1520699517.142 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:31:57.557Z,1520699517.557 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:31:57.950Z,1520699517.950 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:31:58.321Z,1520699518.321 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:31:58.740Z,1520699518.740 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:31:59.153Z,1520699519.153 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:31:59.530Z,1520699519.530 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:31:59.946Z,1520699519.946 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:32:00.329Z,1520699520.329 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:32:00.733Z,1520699520.733 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:32:01.144Z,1520699521.144 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:32:01.536Z,1520699521.536 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:32:01.928Z,1520699521.928 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:32:02.332Z,1520699522.332 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:32:02.729Z,1520699522.729 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:32:03.154Z,1520699523.154 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:32:03.537Z,1520699523.537 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:32:03.950Z,1520699523.950 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:32:04.348Z,1520699524.348 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:32:04.751Z,1520699524.751 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:32:05.117Z,1520699525.117 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:32:05.571Z,1520699525.571 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:32:05.904Z,1520699525.904 [NAL9602](INFO): NAL9602 initialized
2018-03-10T16:32:05.937Z,1520699525.937 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:32:06.354Z,1520699526.354 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:32:06.759Z,1520699526.759 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:32:07.152Z,1520699527.152 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:32:07.542Z,1520699527.542 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:32:07.934Z,1520699527.934 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:32:08.335Z,1520699528.335 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:32:08.733Z,1520699528.733 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:32:09.132Z,1520699529.132 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:32:09.539Z,1520699529.539 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:32:09.939Z,1520699529.939 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:32:10.362Z,1520699530.362 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:32:10.749Z,1520699530.749 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:32:11.142Z,1520699531.142 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:32:11.542Z,1520699531.542 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:32:11.942Z,1520699531.942 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:32:12.345Z,1520699532.345 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:32:12.761Z,1520699532.761 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:32:13.133Z,1520699533.133 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:32:13.534Z,1520699533.534 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:32:13.935Z,1520699533.935 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:32:14.356Z,1520699534.356 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:32:14.732Z,1520699534.732 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:32:15.131Z,1520699535.131 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:32:15.529Z,1520699535.529 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:32:15.933Z,1520699535.933 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:32:16.323Z,1520699536.323 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:32:16.729Z,1520699536.729 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:32:17.128Z,1520699537.128 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:32:17.528Z,1520699537.528 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:32:17.937Z,1520699537.937 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:32:18.338Z,1520699538.338 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:32:18.753Z,1520699538.753 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:32:19.147Z,1520699539.147 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:32:19.560Z,1520699539.560 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:32:19.971Z,1520699539.971 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:32:20.345Z,1520699540.345 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:32:20.742Z,1520699540.742 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:32:21.148Z,1520699541.148 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:32:21.542Z,1520699541.542 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:32:21.921Z,1520699541.921 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:32:22.339Z,1520699542.339 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:32:22.733Z,1520699542.733 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:32:23.124Z,1520699543.124 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:32:23.526Z,1520699543.526 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:32:23.949Z,1520699543.949 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:32:24.338Z,1520699544.338 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:32:24.737Z,1520699544.737 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:32:25.143Z,1520699545.143 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:32:25.539Z,1520699545.539 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:32:25.952Z,1520699545.952 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:32:26.349Z,1520699546.349 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:32:29.595Z,1520699549.595 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:32:29.732Z,1520699549.732 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:32:30.099Z,1520699550.099 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:32:30.503Z,1520699550.503 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:32:30.885Z,1520699550.885 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:32:31.290Z,1520699551.290 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:32:31.689Z,1520699551.689 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:32:32.090Z,1520699552.090 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:32:32.498Z,1520699552.498 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:32:32.893Z,1520699552.893 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:32:33.293Z,1520699553.293 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:32:33.702Z,1520699553.702 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:32:34.088Z,1520699554.088 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:32:34.501Z,1520699554.501 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:32:34.904Z,1520699554.904 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:32:35.307Z,1520699555.307 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:32:35.703Z,1520699555.703 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:32:36.085Z,1520699556.085 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:32:36.485Z,1520699556.485 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:32:36.885Z,1520699556.885 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:32:37.285Z,1520699557.285 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:32:37.681Z,1520699557.681 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:32:38.081Z,1520699558.081 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:32:38.495Z,1520699558.495 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:32:38.890Z,1520699558.890 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:32:39.289Z,1520699559.289 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:32:39.706Z,1520699559.706 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:32:40.107Z,1520699560.107 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:32:40.503Z,1520699560.503 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:32:40.918Z,1520699560.918 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:32:41.301Z,1520699561.301 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:32:41.682Z,1520699561.682 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:32:42.101Z,1520699562.101 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:32:42.490Z,1520699562.490 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:32:42.884Z,1520699562.884 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:32:43.289Z,1520699563.289 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:32:43.698Z,1520699563.698 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:32:44.098Z,1520699564.098 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:32:44.492Z,1520699564.492 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:32:44.904Z,1520699564.904 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:32:45.307Z,1520699565.307 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:32:45.704Z,1520699565.704 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:32:46.104Z,1520699566.104 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:32:46.485Z,1520699566.485 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:32:46.902Z,1520699566.902 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:32:47.285Z,1520699567.285 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:32:47.681Z,1520699567.681 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:32:48.085Z,1520699568.085 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:32:48.489Z,1520699568.489 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:32:48.886Z,1520699568.886 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:32:49.285Z,1520699569.285 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:32:49.709Z,1520699569.709 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:32:50.096Z,1520699570.096 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:32:50.485Z,1520699570.485 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:32:50.886Z,1520699570.886 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:32:51.285Z,1520699571.285 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:32:51.693Z,1520699571.693 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:32:52.080Z,1520699572.080 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:32:52.485Z,1520699572.485 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:32:52.895Z,1520699572.895 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:32:53.295Z,1520699573.295 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:32:53.681Z,1520699573.681 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:32:54.085Z,1520699574.085 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:32:54.481Z,1520699574.481 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:32:54.889Z,1520699574.889 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:32:55.285Z,1520699575.285 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:32:55.685Z,1520699575.685 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:32:56.085Z,1520699576.085 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:32:56.489Z,1520699576.489 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:32:56.885Z,1520699576.885 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:32:57.285Z,1520699577.285 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:32:57.689Z,1520699577.689 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:32:58.090Z,1520699578.090 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:32:58.491Z,1520699578.491 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:32:58.894Z,1520699578.894 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:32:59.293Z,1520699579.293 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:32:59.684Z,1520699579.684 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:33:00.092Z,1520699580.092 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:33:00.503Z,1520699580.503 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:33:00.892Z,1520699580.892 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:33:01.290Z,1520699581.290 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:33:01.708Z,1520699581.708 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:33:02.098Z,1520699582.098 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:33:02.484Z,1520699582.484 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:33:02.888Z,1520699582.888 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:33:03.286Z,1520699583.286 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:33:03.688Z,1520699583.688 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:33:04.081Z,1520699584.081 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:33:04.485Z,1520699584.485 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:33:04.885Z,1520699584.885 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:33:05.297Z,1520699585.297 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:33:05.692Z,1520699585.692 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:33:06.096Z,1520699586.096 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:33:06.484Z,1520699586.484 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:33:06.885Z,1520699586.885 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:33:07.285Z,1520699587.285 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:33:07.697Z,1520699587.697 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:33:08.092Z,1520699588.092 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:33:08.492Z,1520699588.492 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:33:08.893Z,1520699588.893 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:33:09.293Z,1520699589.293 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:33:09.690Z,1520699589.690 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:33:10.103Z,1520699590.103 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:33:10.503Z,1520699590.503 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:33:10.890Z,1520699590.890 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:33:11.289Z,1520699591.289 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:33:11.693Z,1520699591.693 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:33:12.092Z,1520699592.092 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:33:12.498Z,1520699592.498 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:33:12.893Z,1520699592.893 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:33:13.302Z,1520699593.302 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:33:13.691Z,1520699593.691 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:33:14.092Z,1520699594.092 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:33:14.502Z,1520699594.502 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:33:14.904Z,1520699594.904 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:33:15.301Z,1520699595.301 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:33:15.703Z,1520699595.703 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:33:16.084Z,1520699596.084 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:33:16.485Z,1520699596.485 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:33:16.890Z,1520699596.890 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:33:17.285Z,1520699597.285 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:33:17.689Z,1520699597.689 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:33:18.104Z,1520699598.104 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:33:18.485Z,1520699598.485 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:33:18.889Z,1520699598.889 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:33:19.317Z,1520699599.317 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:33:19.718Z,1520699599.718 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:33:20.103Z,1520699600.103 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:33:20.517Z,1520699600.517 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:33:20.889Z,1520699600.889 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:33:21.292Z,1520699601.293 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:33:21.695Z,1520699601.695 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:33:22.092Z,1520699602.092 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:33:22.494Z,1520699602.494 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:33:22.893Z,1520699602.893 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:33:23.294Z,1520699603.294 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:33:23.689Z,1520699603.689 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:33:24.103Z,1520699604.103 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:33:24.505Z,1520699604.505 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:33:24.905Z,1520699604.905 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:33:25.304Z,1520699605.304 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:33:25.710Z,1520699605.710 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:33:25.738Z,1520699605.738 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-03-10T16:28:25.7Z
2018-03-10T16:33:25.738Z,1520699605.738 [Default:CheckIn:Read_GPS] Stopped
2018-03-10T16:33:25.738Z,1520699605.738 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-03-10T16:33:26.085Z,1520699606.085 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:33:26.639Z,1520699606.639 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:33:29.657Z,1520699609.657 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:33:29.803Z,1520699609.803 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:33:30.144Z,1520699610.144 [DataOverHttps](INFO): Sending 69 bytes from file Logs/20180310T051512/Courier0264.lzma
2018-03-10T16:33:30.183Z,1520699610.183 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:33:30.561Z,1520699610.561 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:33:30.942Z,1520699610.942 [DataOverHttps](INFO): Moved sent file to Logs/20180310T051512/Courier0264.lzma.bak
2018-03-10T16:33:30.942Z,1520699610.942 [DataOverHttps](INFO): SBD MOMSN=8006088
2018-03-10T16:33:30.983Z,1520699610.983 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:33:31.691Z,1520699611.691 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:33:31.830Z,1520699611.830 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:33:32.203Z,1520699612.203 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:33:35.373Z,1520699615.373 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:33:35.512Z,1520699615.512 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:33:35.878Z,1520699615.878 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:33:36.279Z,1520699616.279 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:33:36.680Z,1520699616.680 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:33:37.082Z,1520699617.082 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:33:37.484Z,1520699617.484 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:33:40.757Z,1520699620.757 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:33:40.886Z,1520699620.886 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:33:41.219Z,1520699621.219 [DataOverHttps](INFO): Sending 282 bytes from file Logs/20180310T051512/Express0265.lzma
2018-03-10T16:33:41.256Z,1520699621.256 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:33:41.648Z,1520699621.648 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:33:42.018Z,1520699622.018 [DataOverHttps](INFO): Moved sent file to Logs/20180310T051512/Express0265.lzma.bak
2018-03-10T16:33:42.018Z,1520699622.018 [DataOverHttps](INFO): SBD MOMSN=8006091
2018-03-10T16:33:42.063Z,1520699622.063 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:33:42.728Z,1520699622.728 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session.
2018-03-10T16:33:42.745Z,1520699622.745 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:33:42.764Z,1520699622.764 [Default:CheckIn:Read_Iridium] Stopped
2018-03-10T16:33:42.765Z,1520699622.765 [Default:CheckIn:C.Wait] Running Loop=1
2018-03-10T16:33:42.765Z,1520699622.765 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-03-10T16:33:42.870Z,1520699622.870 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:33:43.245Z,1520699623.245 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:33:46.551Z,1520699626.551 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:33:46.667Z,1520699626.667 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:33:47.064Z,1520699627.064 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:33:47.465Z,1520699627.465 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:33:47.860Z,1520699627.860 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:33:48.260Z,1520699628.260 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:33:48.659Z,1520699628.659 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:33:49.060Z,1520699629.060 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:33:49.461Z,1520699629.461 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:33:49.872Z,1520699629.872 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:33:50.248Z,1520699630.248 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:33:50.672Z,1520699630.672 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:33:51.053Z,1520699631.053 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:33:51.458Z,1520699631.458 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:33:51.859Z,1520699631.859 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:33:52.266Z,1520699632.266 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:33:52.658Z,1520699632.658 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:33:53.060Z,1520699633.060 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:33:53.463Z,1520699633.463 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:33:53.848Z,1520699633.848 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:33:54.253Z,1520699634.253 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:33:54.656Z,1520699634.656 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:33:55.056Z,1520699635.056 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:33:55.452Z,1520699635.452 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:33:55.852Z,1520699635.852 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:33:56.248Z,1520699636.248 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:33:56.648Z,1520699636.648 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:33:57.052Z,1520699637.052 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:33:57.452Z,1520699637.452 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:33:57.872Z,1520699637.872 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:33:58.255Z,1520699638.255 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:33:58.648Z,1520699638.648 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:33:59.056Z,1520699639.056 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:33:59.456Z,1520699639.456 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:33:59.858Z,1520699639.858 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:34:00.263Z,1520699640.263 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:34:00.656Z,1520699640.656 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:34:01.066Z,1520699641.066 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:34:01.460Z,1520699641.460 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:34:01.861Z,1520699641.861 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:34:02.247Z,1520699642.247 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:34:02.659Z,1520699642.659 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:34:03.065Z,1520699643.065 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:34:03.459Z,1520699643.459 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:34:03.864Z,1520699643.864 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:34:04.251Z,1520699644.251 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:34:04.648Z,1520699644.648 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:34:05.052Z,1520699645.052 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:34:05.452Z,1520699645.452 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:34:05.860Z,1520699645.860 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:34:06.252Z,1520699646.252 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:34:06.656Z,1520699646.656 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:34:07.058Z,1520699647.058 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:34:07.460Z,1520699647.460 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:34:07.850Z,1520699647.850 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:34:08.260Z,1520699648.260 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:34:08.670Z,1520699648.670 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:34:09.060Z,1520699649.060 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:34:09.461Z,1520699649.461 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:34:09.860Z,1520699649.860 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:34:10.256Z,1520699650.256 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:34:10.660Z,1520699650.660 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:34:11.060Z,1520699651.060 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:34:11.448Z,1520699651.448 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:34:11.864Z,1520699651.864 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:34:12.252Z,1520699652.252 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:34:12.649Z,1520699652.649 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:34:13.036Z,1520699653.036 [NAL9602](INFO): Powering down
2018-03-10T16:34:13.054Z,1520699653.054 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:34:13.460Z,1520699653.460 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:34:13.857Z,1520699653.857 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:34:14.256Z,1520699654.256 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:34:14.661Z,1520699654.661 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:34:15.060Z,1520699655.060 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:34:15.460Z,1520699655.460 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:34:15.860Z,1520699655.860 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:34:16.253Z,1520699656.253 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:34:16.660Z,1520699656.660 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:34:17.060Z,1520699657.060 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:34:17.459Z,1520699657.459 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:34:17.865Z,1520699657.865 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:34:18.268Z,1520699658.268 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:34:18.657Z,1520699658.657 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:34:19.052Z,1520699659.052 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:34:19.453Z,1520699659.453 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:34:19.853Z,1520699659.853 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:34:20.262Z,1520699660.262 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:34:20.659Z,1520699660.659 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:34:21.056Z,1520699661.056 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:34:21.458Z,1520699661.458 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:34:21.864Z,1520699661.864 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:34:22.259Z,1520699662.259 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:34:22.652Z,1520699662.652 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:34:23.052Z,1520699663.052 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:34:23.092Z,1520699663.092 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T16:34:23.092Z,1520699663.092 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 148
2018-03-10T16:34:23.092Z,1520699663.092 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-10T16:34:23.105Z,1520699663.105 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-10T16:34:23.452Z,1520699663.452 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:34:23.513Z,1520699663.513 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-10T16:34:23.513Z,1520699663.513 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 148
2018-03-10T16:34:23.856Z,1520699663.856 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:34:23.893Z,1520699663.893 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-10T16:34:23.894Z,1520699663.894 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-10T16:34:23.894Z,1520699663.894 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-10T16:34:24.265Z,1520699664.265 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:34:24.657Z,1520699664.657 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:34:25.054Z,1520699665.054 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:34:25.457Z,1520699665.457 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:34:25.853Z,1520699665.853 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:34:26.260Z,1520699666.260 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:34:26.664Z,1520699666.664 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:34:27.052Z,1520699667.052 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:34:27.453Z,1520699667.453 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:34:27.852Z,1520699667.852 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:34:28.248Z,1520699668.248 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:34:28.652Z,1520699668.652 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:34:29.053Z,1520699669.053 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:34:29.452Z,1520699669.452 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:34:29.859Z,1520699669.859 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:34:30.257Z,1520699670.257 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:34:30.653Z,1520699670.653 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:34:31.059Z,1520699671.059 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:34:31.461Z,1520699671.461 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:34:31.861Z,1520699671.861 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:34:32.269Z,1520699672.269 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:34:32.656Z,1520699672.656 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:34:33.051Z,1520699673.051 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:34:33.458Z,1520699673.458 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:34:33.858Z,1520699673.858 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:34:34.250Z,1520699674.250 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:34:34.664Z,1520699674.664 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:34:35.060Z,1520699675.060 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:34:35.465Z,1520699675.465 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:34:35.864Z,1520699675.864 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:34:36.252Z,1520699676.252 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:34:36.269Z,1520699676.269 [BPC1](ERROR): Failed to receive battery data
2018-03-10T16:34:36.269Z,1520699676.269 [BPC1] Communications Fault, FailCount= 1
2018-03-10T16:34:36.269Z,1520699676.269 [BPC1](ERROR): Communications Fault
2018-03-10T16:34:36.331Z,1520699676.331 [CBIT](ERROR): Communications Fault in component: BPC1
2018-03-10T16:34:36.660Z,1520699676.660 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:34:37.053Z,1520699677.053 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:34:37.457Z,1520699677.457 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:34:37.519Z,1520699677.519 [CBIT](INFO): Clearing failed state for component BPC1
2018-03-10T16:34:37.519Z,1520699677.519 [BPC1] No Fault, FailCount= 1
2018-03-10T16:34:37.872Z,1520699677.872 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:34:38.253Z,1520699678.253 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:34:38.661Z,1520699678.661 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:34:39.061Z,1520699679.061 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:34:39.446Z,1520699679.446 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:34:39.864Z,1520699679.864 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:34:40.248Z,1520699680.248 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:34:40.648Z,1520699680.648 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:34:41.057Z,1520699681.057 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:34:41.460Z,1520699681.460 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:34:41.854Z,1520699681.854 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:34:42.257Z,1520699682.257 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:34:42.656Z,1520699682.656 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:34:43.055Z,1520699683.055 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:34:43.461Z,1520699683.461 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:34:46.763Z,1520699686.763 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:34:46.874Z,1520699686.874 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:34:47.261Z,1520699687.261 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:34:47.640Z,1520699687.640 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:34:48.052Z,1520699688.052 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:34:48.444Z,1520699688.444 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:34:48.840Z,1520699688.840 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:34:49.258Z,1520699689.258 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:34:49.644Z,1520699689.644 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:34:50.040Z,1520699690.040 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:34:50.444Z,1520699690.444 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:34:50.848Z,1520699690.848 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:34:51.240Z,1520699691.240 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:34:51.644Z,1520699691.644 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:34:52.044Z,1520699692.044 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:34:52.444Z,1520699692.444 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:34:52.849Z,1520699692.849 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:34:53.264Z,1520699693.264 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:34:53.641Z,1520699693.641 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:34:54.046Z,1520699694.046 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:34:54.445Z,1520699694.445 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:34:54.839Z,1520699694.839 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:34:55.238Z,1520699695.238 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:34:55.644Z,1520699695.644 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:34:56.044Z,1520699696.044 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:34:56.441Z,1520699696.441 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:34:56.850Z,1520699696.850 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:34:57.252Z,1520699697.252 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:34:57.649Z,1520699697.649 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:34:58.050Z,1520699698.050 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:34:58.450Z,1520699698.450 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:34:58.852Z,1520699698.852 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:34:59.252Z,1520699699.252 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:34:59.648Z,1520699699.648 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:35:00.049Z,1520699700.049 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:35:00.456Z,1520699700.456 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:35:00.849Z,1520699700.849 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:35:01.248Z,1520699701.248 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:35:01.649Z,1520699701.649 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:35:02.056Z,1520699702.056 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:35:02.438Z,1520699702.438 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:35:02.857Z,1520699702.857 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:35:03.240Z,1520699703.240 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:35:03.642Z,1520699703.642 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:35:04.056Z,1520699704.056 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:35:04.440Z,1520699704.440 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:35:04.843Z,1520699704.843 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:35:05.264Z,1520699705.264 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:35:05.641Z,1520699705.641 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:35:06.040Z,1520699706.040 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:35:06.474Z,1520699706.474 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:35:06.856Z,1520699706.856 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:35:07.242Z,1520699707.242 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:35:07.645Z,1520699707.645 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:35:08.040Z,1520699708.040 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:35:08.048Z,1520699708.048 [BPC1](FAULT): Failed to initialize
2018-03-10T16:35:08.048Z,1520699708.048 [BPC1] Communications Fault, FailCount= 2
2018-03-10T16:35:08.048Z,1520699708.048 [BPC1](ERROR): Communications Fault
2018-03-10T16:35:08.119Z,1520699708.119 [CBIT](ERROR): Communications Fault in component: BPC1
2018-03-10T16:35:08.442Z,1520699708.442 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:35:08.848Z,1520699708.848 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:35:09.244Z,1520699709.244 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:35:09.291Z,1520699709.291 [CBIT](INFO): Clearing failed state for component BPC1
2018-03-10T16:35:09.291Z,1520699709.291 [BPC1] No Fault, FailCount= 2
2018-03-10T16:35:09.640Z,1520699709.640 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:35:10.044Z,1520699710.044 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:35:10.449Z,1520699710.449 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:35:10.838Z,1520699710.838 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:35:11.244Z,1520699711.244 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:35:11.649Z,1520699711.649 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:35:12.052Z,1520699712.052 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:35:12.461Z,1520699712.461 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:35:12.849Z,1520699712.849 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:35:13.254Z,1520699713.254 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:35:13.652Z,1520699713.652 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:35:14.048Z,1520699714.048 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:35:14.450Z,1520699714.450 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:35:14.858Z,1520699714.858 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:35:15.257Z,1520699715.257 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:35:15.650Z,1520699715.650 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:35:16.053Z,1520699716.053 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:35:16.449Z,1520699716.449 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:35:16.848Z,1520699716.848 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:35:17.253Z,1520699717.253 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:35:17.652Z,1520699717.652 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:35:18.048Z,1520699718.048 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:35:18.448Z,1520699718.448 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:35:18.852Z,1520699718.852 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:35:19.252Z,1520699719.252 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:35:19.648Z,1520699719.648 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:35:20.053Z,1520699720.053 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:35:20.449Z,1520699720.449 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:35:20.848Z,1520699720.848 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:35:21.240Z,1520699721.240 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:35:21.642Z,1520699721.642 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:35:22.048Z,1520699722.048 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:35:22.456Z,1520699722.456 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:35:22.841Z,1520699722.841 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:35:23.248Z,1520699723.248 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:35:23.640Z,1520699723.640 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:35:24.053Z,1520699724.053 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:35:24.453Z,1520699724.453 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:35:24.853Z,1520699724.853 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:35:25.252Z,1520699725.252 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:35:25.651Z,1520699725.651 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:35:26.056Z,1520699726.056 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:35:26.442Z,1520699726.442 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:35:26.848Z,1520699726.848 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:35:27.252Z,1520699727.252 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:35:27.639Z,1520699727.639 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:35:28.055Z,1520699728.055 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:35:28.444Z,1520699728.444 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:35:28.842Z,1520699728.842 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:35:29.247Z,1520699729.247 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:35:29.645Z,1520699729.645 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:35:30.060Z,1520699730.060 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:35:30.465Z,1520699730.465 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:35:30.844Z,1520699730.844 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:35:31.239Z,1520699731.239 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:35:31.666Z,1520699731.666 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:35:32.041Z,1520699732.041 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:35:32.442Z,1520699732.442 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:35:32.845Z,1520699732.845 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:35:33.249Z,1520699733.249 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:35:33.638Z,1520699733.638 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:35:34.044Z,1520699734.044 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:35:34.448Z,1520699734.448 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:35:34.839Z,1520699734.839 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:35:35.249Z,1520699735.249 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:35:35.649Z,1520699735.649 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:35:36.049Z,1520699736.049 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:35:36.450Z,1520699736.450 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:35:36.849Z,1520699736.849 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:35:37.253Z,1520699737.253 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:35:37.652Z,1520699737.652 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:35:38.052Z,1520699738.052 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:35:38.450Z,1520699738.450 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:35:38.851Z,1520699738.851 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:35:39.256Z,1520699739.256 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:35:39.649Z,1520699739.649 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:35:40.052Z,1520699740.052 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:35:40.060Z,1520699740.060 [BPC1](FAULT): Failed to initialize
2018-03-10T16:35:40.060Z,1520699740.060 [BPC1] Communications Fault, FailCount= 3
2018-03-10T16:35:40.060Z,1520699740.060 [BPC1](ERROR): Communications Fault
2018-03-10T16:35:40.082Z,1520699740.082 [CBIT](ERROR): Communications Fault in component: BPC1
2018-03-10T16:35:40.451Z,1520699740.451 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:35:40.840Z,1520699740.840 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:35:41.253Z,1520699741.253 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:35:41.282Z,1520699741.282 [CBIT](INFO): Clearing failed state for component BPC1
2018-03-10T16:35:41.282Z,1520699741.282 [BPC1] No Fault, FailCount= 3
2018-03-10T16:35:41.652Z,1520699741.652 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:35:41.725Z,1520699741.725 [CBIT](DEBUG): EFC running - data check-sum false
2018-03-10T16:35:42.056Z,1520699742.056 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:35:42.452Z,1520699742.452 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:35:42.852Z,1520699742.852 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:35:43.254Z,1520699743.254 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:35:43.653Z,1520699743.653 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:35:46.862Z,1520699746.862 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:35:46.968Z,1520699746.968 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:35:47.332Z,1520699747.332 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:35:47.732Z,1520699747.732 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:35:48.132Z,1520699748.132 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:35:48.529Z,1520699748.529 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:35:48.926Z,1520699748.926 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:35:49.330Z,1520699749.330 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:35:49.736Z,1520699749.736 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:35:50.132Z,1520699750.132 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:35:50.518Z,1520699750.518 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:35:50.944Z,1520699750.944 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:35:51.336Z,1520699751.336 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:35:51.722Z,1520699751.722 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:35:52.124Z,1520699752.124 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:35:52.520Z,1520699752.520 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:35:52.920Z,1520699752.920 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:35:53.325Z,1520699753.325 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:35:53.724Z,1520699753.724 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:35:54.120Z,1520699754.120 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:35:54.524Z,1520699754.524 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:35:54.924Z,1520699754.924 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:35:55.318Z,1520699755.318 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:35:55.724Z,1520699755.724 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:35:56.124Z,1520699756.124 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:35:56.520Z,1520699756.520 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:35:56.920Z,1520699756.920 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:35:57.324Z,1520699757.324 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:35:57.722Z,1520699757.722 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:35:58.125Z,1520699758.125 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:35:58.524Z,1520699758.524 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:35:58.924Z,1520699758.924 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:35:59.336Z,1520699759.336 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:35:59.734Z,1520699759.734 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:36:00.135Z,1520699760.135 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:36:00.533Z,1520699760.533 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:36:00.931Z,1520699760.931 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:36:01.320Z,1520699761.320 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:36:01.728Z,1520699761.728 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:36:02.128Z,1520699762.128 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:36:02.524Z,1520699762.524 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:36:02.945Z,1520699762.945 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:36:03.326Z,1520699763.326 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:36:03.720Z,1520699763.720 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:36:04.124Z,1520699764.124 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:36:04.528Z,1520699764.528 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:36:04.929Z,1520699764.929 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:36:05.325Z,1520699765.325 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:36:05.728Z,1520699765.728 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:36:06.128Z,1520699766.128 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:36:06.524Z,1520699766.524 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:36:06.928Z,1520699766.928 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:36:07.320Z,1520699767.320 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:36:07.728Z,1520699767.728 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:36:08.124Z,1520699768.124 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:36:08.520Z,1520699768.520 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:36:08.924Z,1520699768.924 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:36:09.328Z,1520699769.328 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:36:09.725Z,1520699769.725 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:36:10.124Z,1520699770.124 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:36:10.528Z,1520699770.528 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:36:10.932Z,1520699770.932 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:36:11.336Z,1520699771.336 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:36:11.732Z,1520699771.732 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:36:11.742Z,1520699771.742 [BPC1](FAULT): Failed to initialize
2018-03-10T16:36:11.742Z,1520699771.742 [BPC1] Communications Fault, FailCount= 4
2018-03-10T16:36:11.742Z,1520699771.742 [BPC1](ERROR): Communications Fault
2018-03-10T16:36:11.806Z,1520699771.806 [CBIT](ERROR): Communications Fault in component: BPC1
2018-03-10T16:36:12.131Z,1520699772.131 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:36:12.533Z,1520699772.533 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:36:12.928Z,1520699772.928 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:36:12.981Z,1520699772.981 [CBIT](INFO): Clearing failed state for component BPC1
2018-03-10T16:36:12.981Z,1520699772.981 [BPC1] No Fault, FailCount= 4
2018-03-10T16:36:13.328Z,1520699773.328 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:36:13.733Z,1520699773.733 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:36:14.137Z,1520699774.137 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:36:14.530Z,1520699774.530 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:36:14.933Z,1520699774.933 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:36:15.342Z,1520699775.342 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:36:15.732Z,1520699775.732 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:36:16.133Z,1520699776.133 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:36:16.534Z,1520699776.534 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:36:16.933Z,1520699776.933 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:36:17.329Z,1520699777.329 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:36:17.722Z,1520699777.722 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:36:18.138Z,1520699778.138 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:36:18.524Z,1520699778.524 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:36:18.917Z,1520699778.917 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:36:19.328Z,1520699779.328 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:36:19.724Z,1520699779.724 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:36:20.120Z,1520699780.120 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:36:20.520Z,1520699780.520 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:36:20.920Z,1520699780.920 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:36:21.322Z,1520699781.322 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:36:21.724Z,1520699781.724 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:36:22.129Z,1520699782.129 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:36:22.525Z,1520699782.525 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:36:22.933Z,1520699782.933 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:36:23.332Z,1520699783.332 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:36:23.729Z,1520699783.729 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:36:24.132Z,1520699784.132 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:36:24.532Z,1520699784.532 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:36:24.929Z,1520699784.929 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:36:25.332Z,1520699785.332 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:36:25.732Z,1520699785.732 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:36:26.133Z,1520699786.133 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:36:26.532Z,1520699786.532 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:36:26.932Z,1520699786.932 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:36:27.332Z,1520699787.332 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:36:27.732Z,1520699787.732 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:36:28.133Z,1520699788.133 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:36:28.532Z,1520699788.532 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:36:28.928Z,1520699788.928 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:36:29.332Z,1520699789.332 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:36:29.732Z,1520699789.732 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:36:30.136Z,1520699790.136 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:36:30.532Z,1520699790.532 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:36:30.930Z,1520699790.930 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:36:31.328Z,1520699791.328 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:36:31.726Z,1520699791.726 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:36:32.131Z,1520699792.131 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:36:32.536Z,1520699792.536 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:36:32.933Z,1520699792.933 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:36:33.332Z,1520699793.332 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:36:33.732Z,1520699793.732 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:36:34.128Z,1520699794.128 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:36:34.532Z,1520699794.532 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:36:34.932Z,1520699794.932 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:36:35.332Z,1520699795.332 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:36:35.732Z,1520699795.732 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:36:36.141Z,1520699796.141 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:36:36.528Z,1520699796.528 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:36:36.920Z,1520699796.920 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:36:37.337Z,1520699797.337 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:36:37.744Z,1520699797.744 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:36:38.124Z,1520699798.124 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:36:38.525Z,1520699798.525 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:36:38.937Z,1520699798.937 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:36:39.337Z,1520699799.337 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:36:39.725Z,1520699799.725 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:36:40.127Z,1520699800.127 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:36:40.524Z,1520699800.524 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:36:40.944Z,1520699800.944 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:36:41.344Z,1520699801.344 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:36:41.719Z,1520699801.719 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:36:42.124Z,1520699802.124 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:36:42.525Z,1520699802.525 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:36:42.929Z,1520699802.929 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:36:43.332Z,1520699803.332 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:36:43.732Z,1520699803.732 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:36:46.864Z,1520699806.864 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:36:46.993Z,1520699806.993 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:36:47.368Z,1520699807.368 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:36:47.739Z,1520699807.739 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:36:48.163Z,1520699808.163 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:36:48.544Z,1520699808.544 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:36:48.940Z,1520699808.940 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:36:49.347Z,1520699809.347 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:36:49.749Z,1520699809.749 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:36:50.140Z,1520699810.140 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:36:50.545Z,1520699810.545 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:36:50.944Z,1520699810.944 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:36:51.350Z,1520699811.350 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:36:51.748Z,1520699811.748 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:36:52.148Z,1520699812.148 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:36:52.543Z,1520699812.543 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:36:52.949Z,1520699812.949 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:36:53.344Z,1520699813.344 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:36:53.744Z,1520699813.744 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:36:54.148Z,1520699814.148 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:36:54.549Z,1520699814.549 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:36:54.947Z,1520699814.947 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:36:55.343Z,1520699815.343 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:36:55.745Z,1520699815.745 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:36:56.146Z,1520699816.146 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:36:56.545Z,1520699816.545 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:36:56.946Z,1520699816.946 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:36:57.344Z,1520699817.344 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:36:57.745Z,1520699817.745 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:36:58.152Z,1520699818.152 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:36:58.552Z,1520699818.552 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:36:58.946Z,1520699818.946 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:36:59.356Z,1520699819.356 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:36:59.753Z,1520699819.753 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:37:00.152Z,1520699820.152 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:37:00.552Z,1520699820.552 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:37:00.953Z,1520699820.953 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:37:01.340Z,1520699821.340 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:37:01.763Z,1520699821.763 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:37:02.144Z,1520699822.144 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:37:02.544Z,1520699822.544 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:37:02.945Z,1520699822.945 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:37:03.348Z,1520699823.348 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:37:03.750Z,1520699823.750 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:37:04.154Z,1520699824.154 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:37:04.547Z,1520699824.547 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:37:04.953Z,1520699824.953 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:37:05.350Z,1520699825.350 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:37:05.756Z,1520699825.756 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:37:06.148Z,1520699826.148 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:37:06.564Z,1520699826.564 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:37:06.953Z,1520699826.953 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:37:07.340Z,1520699827.340 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:37:07.780Z,1520699827.780 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:37:08.144Z,1520699828.144 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:37:08.543Z,1520699828.543 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:37:08.949Z,1520699828.949 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:37:09.346Z,1520699829.346 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:37:09.746Z,1520699829.746 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:37:10.155Z,1520699830.155 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:37:10.546Z,1520699830.546 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:37:10.944Z,1520699830.944 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:37:11.344Z,1520699831.344 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:37:11.744Z,1520699831.744 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:37:12.144Z,1520699832.144 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:37:12.553Z,1520699832.553 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:37:12.952Z,1520699832.952 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:37:13.350Z,1520699833.350 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:37:13.762Z,1520699833.762 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:37:14.149Z,1520699834.149 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:37:14.557Z,1520699834.557 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:37:14.954Z,1520699834.954 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:37:15.348Z,1520699835.348 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:37:15.739Z,1520699835.739 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:37:16.144Z,1520699836.144 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:37:16.547Z,1520699836.547 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:37:16.949Z,1520699836.949 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:37:17.364Z,1520699837.364 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:37:17.745Z,1520699837.745 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:37:18.149Z,1520699838.149 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:37:18.550Z,1520699838.550 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:37:18.949Z,1520699838.949 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:37:19.349Z,1520699839.349 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:37:19.754Z,1520699839.754 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:37:20.149Z,1520699840.149 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:37:20.538Z,1520699840.538 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:37:20.961Z,1520699840.961 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:37:21.340Z,1520699841.340 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:37:21.740Z,1520699841.740 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:37:22.164Z,1520699842.164 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:37:22.540Z,1520699842.540 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:37:22.957Z,1520699842.957 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:37:23.344Z,1520699843.344 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:37:23.748Z,1520699843.748 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:37:24.149Z,1520699844.149 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:37:24.183Z,1520699844.183 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T16:37:24.183Z,1520699844.183 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 149
2018-03-10T16:37:24.183Z,1520699844.183 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-10T16:37:24.197Z,1520699844.197 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-10T16:37:24.543Z,1520699844.543 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:37:24.597Z,1520699844.597 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-10T16:37:24.597Z,1520699844.597 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 149
2018-03-10T16:37:24.944Z,1520699844.944 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:37:24.985Z,1520699844.985 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-10T16:37:24.986Z,1520699844.986 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-10T16:37:24.986Z,1520699844.986 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-10T16:37:25.344Z,1520699845.344 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:37:25.749Z,1520699845.749 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:37:26.153Z,1520699846.153 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:37:26.555Z,1520699846.555 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:37:26.954Z,1520699846.954 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:37:27.352Z,1520699847.352 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:37:27.752Z,1520699847.752 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:37:28.152Z,1520699848.152 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:37:28.550Z,1520699848.550 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:37:28.955Z,1520699848.955 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:37:29.355Z,1520699849.355 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:37:29.751Z,1520699849.751 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:37:30.157Z,1520699850.157 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:37:30.552Z,1520699850.552 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:37:30.962Z,1520699850.962 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:37:31.353Z,1520699851.353 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:37:31.752Z,1520699851.752 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:37:32.150Z,1520699852.150 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:37:32.554Z,1520699852.554 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:37:32.955Z,1520699852.955 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:37:33.352Z,1520699853.352 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:37:33.758Z,1520699853.758 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:37:34.151Z,1520699854.151 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:37:34.556Z,1520699854.556 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:37:34.953Z,1520699854.953 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:37:35.356Z,1520699855.356 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:37:35.745Z,1520699855.745 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:37:36.160Z,1520699856.160 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:37:36.544Z,1520699856.544 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:37:36.956Z,1520699856.956 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:37:37.356Z,1520699857.356 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:37:37.744Z,1520699857.744 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:37:38.156Z,1520699858.156 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:37:38.542Z,1520699858.542 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:37:38.968Z,1520699858.968 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:37:39.366Z,1520699859.366 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:37:39.748Z,1520699859.748 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:37:40.144Z,1520699860.144 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:37:40.545Z,1520699860.545 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:37:40.953Z,1520699860.953 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:37:41.350Z,1520699861.350 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:37:41.748Z,1520699861.748 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:37:42.147Z,1520699862.147 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:37:42.550Z,1520699862.550 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:37:42.949Z,1520699862.949 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:37:43.353Z,1520699863.353 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:37:43.753Z,1520699863.753 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:37:48.299Z,1520699868.299 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:37:48.461Z,1520699868.461 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:37:48.827Z,1520699868.827 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:37:49.234Z,1520699869.234 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:37:49.608Z,1520699869.608 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:37:50.011Z,1520699870.011 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:37:50.410Z,1520699870.410 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:37:50.808Z,1520699870.808 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:37:51.216Z,1520699871.216 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:37:51.608Z,1520699871.608 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:37:52.013Z,1520699872.013 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:37:52.420Z,1520699872.420 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:37:52.813Z,1520699872.813 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:37:53.214Z,1520699873.214 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:37:53.617Z,1520699873.617 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:37:54.016Z,1520699874.016 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:37:54.415Z,1520699874.415 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:37:54.817Z,1520699874.817 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:37:55.217Z,1520699875.217 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:37:55.620Z,1520699875.620 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:37:56.033Z,1520699876.033 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:37:56.420Z,1520699876.420 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:37:56.816Z,1520699876.816 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:37:57.219Z,1520699877.219 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:37:57.616Z,1520699877.616 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:37:58.016Z,1520699878.016 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:37:58.407Z,1520699878.407 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:37:58.826Z,1520699878.826 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:37:59.213Z,1520699879.213 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:37:59.625Z,1520699879.625 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:38:00.015Z,1520699880.015 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:38:00.416Z,1520699880.416 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:38:00.817Z,1520699880.817 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:38:01.204Z,1520699881.204 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:38:01.604Z,1520699881.604 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:38:02.008Z,1520699882.008 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:38:02.404Z,1520699882.404 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:38:02.804Z,1520699882.804 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:38:03.212Z,1520699883.212 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:38:03.604Z,1520699883.604 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:38:04.009Z,1520699884.009 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:38:04.412Z,1520699884.412 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:38:04.816Z,1520699884.816 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:38:05.213Z,1520699885.213 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:38:05.617Z,1520699885.617 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:38:06.018Z,1520699886.018 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:38:06.413Z,1520699886.413 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:38:06.824Z,1520699886.824 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:38:07.219Z,1520699887.219 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:38:07.614Z,1520699887.614 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:38:08.020Z,1520699888.020 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:38:08.416Z,1520699888.416 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:38:08.820Z,1520699888.820 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:38:09.220Z,1520699889.220 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:38:09.615Z,1520699889.615 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:38:10.014Z,1520699890.014 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:38:10.416Z,1520699890.416 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:38:10.816Z,1520699890.816 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:38:11.216Z,1520699891.216 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:38:11.617Z,1520699891.617 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:38:12.016Z,1520699892.016 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:38:12.407Z,1520699892.407 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:38:12.815Z,1520699892.815 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:38:13.228Z,1520699893.228 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:38:13.620Z,1520699893.620 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:38:14.028Z,1520699894.028 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:38:14.420Z,1520699894.420 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:38:14.820Z,1520699894.820 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:38:15.216Z,1520699895.216 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:38:15.622Z,1520699895.622 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:38:16.020Z,1520699896.020 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:38:16.416Z,1520699896.416 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:38:16.820Z,1520699896.820 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:38:17.220Z,1520699897.220 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:38:17.604Z,1520699897.604 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:38:18.021Z,1520699898.021 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:38:18.415Z,1520699898.415 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:38:18.808Z,1520699898.808 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:38:19.216Z,1520699899.216 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:38:19.615Z,1520699899.615 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:38:20.017Z,1520699900.017 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:38:20.415Z,1520699900.415 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:38:20.812Z,1520699900.812 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:38:21.228Z,1520699901.228 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:38:21.622Z,1520699901.622 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:38:22.017Z,1520699902.017 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:38:22.418Z,1520699902.418 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:38:22.821Z,1520699902.821 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:38:23.222Z,1520699903.222 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:38:23.611Z,1520699903.611 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:38:24.009Z,1520699904.009 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:38:24.408Z,1520699904.408 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:38:24.828Z,1520699904.828 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:38:25.208Z,1520699905.208 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:38:25.604Z,1520699905.604 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:38:26.028Z,1520699906.028 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:38:26.412Z,1520699906.412 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:38:26.808Z,1520699906.808 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:38:27.213Z,1520699907.213 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:38:27.612Z,1520699907.612 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:38:28.008Z,1520699908.008 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:38:28.408Z,1520699908.408 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:38:28.811Z,1520699908.811 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:38:29.213Z,1520699909.213 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:38:29.616Z,1520699909.616 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:38:30.010Z,1520699910.010 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:38:30.417Z,1520699910.417 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:38:30.824Z,1520699910.824 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:38:31.216Z,1520699911.216 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:38:31.618Z,1520699911.618 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:38:32.019Z,1520699912.019 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:38:32.417Z,1520699912.417 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:38:32.812Z,1520699912.812 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:38:33.215Z,1520699913.215 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:38:33.614Z,1520699913.614 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:38:34.016Z,1520699914.016 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:38:34.420Z,1520699914.420 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:38:34.804Z,1520699914.804 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:38:35.207Z,1520699915.207 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:38:35.620Z,1520699915.620 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:38:36.020Z,1520699916.020 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:38:36.408Z,1520699916.408 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:38:36.809Z,1520699916.809 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:38:37.207Z,1520699917.207 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:38:37.608Z,1520699917.608 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:38:38.028Z,1520699918.028 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:38:38.405Z,1520699918.405 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:38:38.809Z,1520699918.809 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:38:39.208Z,1520699919.208 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:38:39.607Z,1520699919.607 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:38:40.004Z,1520699920.004 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:38:40.408Z,1520699920.408 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:38:40.805Z,1520699920.805 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:38:41.208Z,1520699921.208 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:38:41.612Z,1520699921.612 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:38:42.012Z,1520699922.012 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:38:42.408Z,1520699922.408 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:38:42.812Z,1520699922.812 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:38:43.213Z,1520699923.213 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:38:43.233Z,1520699923.233 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-03-10T16:38:43.233Z,1520699923.233 [Default:CheckIn:C.Wait] Stopped
2018-03-10T16:38:43.233Z,1520699923.233 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-03-10T16:38:43.233Z,1520699923.233 [Default:CheckIn:D] Running Loop=1
2018-03-10T16:38:43.621Z,1520699923.621 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:38:43.665Z,1520699923.665 [Default:CheckIn:D] Stopped
2018-03-10T16:38:43.665Z,1520699923.665 [Default:CheckIn:E] Running Loop=1
2018-03-10T16:38:44.024Z,1520699924.024 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:38:44.075Z,1520699924.075 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 679.429102 min 
2018-03-10T16:38:44.075Z,1520699924.075 [Default:CheckIn:E] Stopped
2018-03-10T16:38:44.076Z,1520699924.076 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-03-10T16:38:44.076Z,1520699924.076 [Default:CheckIn] Stopped
2018-03-10T16:38:44.076Z,1520699924.076 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-03-10T16:38:44.076Z,1520699924.076 [Default:CheckIn](INFO): Running loop #67
2018-03-10T16:38:44.076Z,1520699924.076 [Default:CheckIn] Running Loop=67
2018-03-10T16:38:44.076Z,1520699924.076 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-03-10T16:38:44.076Z,1520699924.076 [Default:CheckIn:Read_GPS] Running Loop=1
2018-03-10T16:38:47.248Z,1520699927.248 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:38:47.360Z,1520699927.360 [NAL9602](INFO): Powering up
2018-03-10T16:38:47.380Z,1520699927.380 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:38:47.725Z,1520699927.725 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:38:48.120Z,1520699928.120 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:38:48.523Z,1520699928.523 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:38:48.929Z,1520699928.929 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:38:49.318Z,1520699929.318 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:38:49.724Z,1520699929.724 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:38:50.133Z,1520699930.133 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:38:50.525Z,1520699930.525 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:38:50.912Z,1520699930.912 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:38:51.325Z,1520699931.325 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:38:51.724Z,1520699931.724 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:38:52.112Z,1520699932.112 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:38:52.536Z,1520699932.536 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:38:52.913Z,1520699932.913 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:38:53.312Z,1520699933.312 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:38:53.729Z,1520699933.729 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:38:54.124Z,1520699934.124 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:38:54.512Z,1520699934.512 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:38:54.924Z,1520699934.924 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:38:55.324Z,1520699935.324 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:38:55.724Z,1520699935.724 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:38:56.124Z,1520699936.124 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:38:56.536Z,1520699936.536 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:38:56.925Z,1520699936.925 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:38:57.336Z,1520699937.336 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:38:57.725Z,1520699937.725 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:38:58.135Z,1520699938.135 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:38:58.501Z,1520699938.501 [NAL9602](INFO): NAL9602 initialized
2018-03-10T16:38:58.518Z,1520699938.518 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:38:58.916Z,1520699938.916 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:38:59.340Z,1520699939.340 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:38:59.743Z,1520699939.743 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:39:00.131Z,1520699940.131 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:39:00.513Z,1520699940.513 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:39:00.920Z,1520699940.920 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:39:01.317Z,1520699941.317 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:39:01.735Z,1520699941.735 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:39:02.135Z,1520699942.135 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:39:02.538Z,1520699942.538 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:39:02.917Z,1520699942.917 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:39:03.338Z,1520699943.338 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:39:03.712Z,1520699943.712 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:39:04.138Z,1520699944.138 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:39:04.540Z,1520699944.540 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:39:04.916Z,1520699944.916 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:39:05.322Z,1520699945.322 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:39:05.716Z,1520699945.716 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:39:06.116Z,1520699946.116 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:39:06.543Z,1520699946.543 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:39:06.946Z,1520699946.946 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:39:07.332Z,1520699947.332 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:39:07.746Z,1520699947.746 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:39:08.123Z,1520699948.123 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:39:08.521Z,1520699948.521 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:39:08.918Z,1520699948.918 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:39:09.344Z,1520699949.344 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:39:09.723Z,1520699949.723 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:39:10.123Z,1520699950.123 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:39:10.522Z,1520699950.522 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:39:10.922Z,1520699950.922 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:39:11.325Z,1520699951.325 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:39:11.743Z,1520699951.743 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:39:12.128Z,1520699952.128 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:39:12.536Z,1520699952.536 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:39:12.940Z,1520699952.940 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:39:13.324Z,1520699953.324 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:39:13.722Z,1520699953.722 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:39:14.125Z,1520699954.125 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:39:14.524Z,1520699954.524 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:39:14.927Z,1520699954.927 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:39:15.324Z,1520699955.324 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:39:15.724Z,1520699955.724 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:39:16.117Z,1520699956.117 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:39:16.516Z,1520699956.516 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:39:16.936Z,1520699956.936 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:39:17.336Z,1520699957.336 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:39:17.730Z,1520699957.730 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:39:18.135Z,1520699958.135 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:39:18.521Z,1520699958.521 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:39:18.916Z,1520699958.916 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:39:19.316Z,1520699959.316 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:39:19.721Z,1520699959.721 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:39:20.116Z,1520699960.116 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:39:20.517Z,1520699960.517 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:39:20.913Z,1520699960.913 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:39:21.321Z,1520699961.321 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:39:21.718Z,1520699961.718 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:39:22.127Z,1520699962.127 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:39:22.550Z,1520699962.550 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:39:22.941Z,1520699962.941 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:39:23.328Z,1520699963.328 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:39:23.716Z,1520699963.716 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:39:24.116Z,1520699964.116 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:39:24.517Z,1520699964.517 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:39:24.916Z,1520699964.916 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:39:25.319Z,1520699965.319 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:39:25.724Z,1520699965.724 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:39:26.121Z,1520699966.121 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:39:26.525Z,1520699966.525 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:39:26.921Z,1520699966.921 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:39:27.331Z,1520699967.331 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:39:27.734Z,1520699967.734 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:39:28.139Z,1520699968.139 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:39:28.544Z,1520699968.544 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:39:28.936Z,1520699968.936 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:39:29.321Z,1520699969.321 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:39:29.737Z,1520699969.737 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:39:30.116Z,1520699970.116 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:39:30.513Z,1520699970.513 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:39:30.916Z,1520699970.916 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:39:31.324Z,1520699971.324 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:39:31.717Z,1520699971.717 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:39:32.117Z,1520699972.117 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:39:32.542Z,1520699972.542 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:39:32.931Z,1520699972.931 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:39:33.342Z,1520699973.342 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:39:33.742Z,1520699973.742 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:39:34.122Z,1520699974.122 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:39:34.520Z,1520699974.520 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:39:34.923Z,1520699974.923 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:39:35.313Z,1520699975.313 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:39:35.728Z,1520699975.728 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:39:36.126Z,1520699976.126 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:39:36.525Z,1520699976.525 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:39:36.925Z,1520699976.925 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:39:37.324Z,1520699977.324 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:39:37.731Z,1520699977.731 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:39:38.134Z,1520699978.134 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:39:38.539Z,1520699978.539 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:39:38.932Z,1520699978.932 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:39:39.317Z,1520699979.317 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:39:39.728Z,1520699979.728 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:39:40.113Z,1520699980.113 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:39:40.516Z,1520699980.516 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:39:40.916Z,1520699980.916 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:39:41.324Z,1520699981.324 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:39:41.742Z,1520699981.742 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:39:42.129Z,1520699982.129 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:39:42.521Z,1520699982.521 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:39:42.934Z,1520699982.934 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:39:43.335Z,1520699983.335 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:39:43.735Z,1520699983.735 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:39:44.135Z,1520699984.135 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:39:48.762Z,1520699988.762 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:39:48.919Z,1520699988.919 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:39:49.325Z,1520699989.325 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:39:49.720Z,1520699989.720 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:39:50.120Z,1520699990.120 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:39:50.493Z,1520699990.493 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:39:50.896Z,1520699990.896 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:39:51.297Z,1520699991.297 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:39:51.718Z,1520699991.718 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:39:52.105Z,1520699992.105 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:39:52.495Z,1520699992.495 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:39:52.900Z,1520699992.900 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:39:53.299Z,1520699993.299 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:39:53.711Z,1520699993.711 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:39:54.125Z,1520699994.125 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:39:54.516Z,1520699994.516 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:39:54.904Z,1520699994.904 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:39:55.305Z,1520699995.305 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:39:55.693Z,1520699995.693 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:39:56.102Z,1520699996.102 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:39:56.511Z,1520699996.511 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:39:56.908Z,1520699996.908 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:39:57.306Z,1520699997.306 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:39:57.709Z,1520699997.709 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:39:58.105Z,1520699998.105 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:39:58.489Z,1520699998.489 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:39:58.916Z,1520699998.916 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:39:59.308Z,1520699999.308 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:39:59.705Z,1520699999.705 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:40:00.119Z,1520700000.119 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:40:00.492Z,1520700000.492 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:40:00.893Z,1520700000.893 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:40:01.292Z,1520700001.292 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:40:01.693Z,1520700001.693 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:40:02.089Z,1520700002.089 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:40:02.492Z,1520700002.492 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:40:02.893Z,1520700002.893 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:40:03.293Z,1520700003.293 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:40:03.692Z,1520700003.692 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:40:04.116Z,1520700004.116 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:40:04.499Z,1520700004.499 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:40:04.916Z,1520700004.916 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:40:05.311Z,1520700005.311 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:40:05.693Z,1520700005.693 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:40:06.091Z,1520700006.091 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:40:06.492Z,1520700006.492 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:40:06.894Z,1520700006.894 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:40:07.295Z,1520700007.295 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:40:07.693Z,1520700007.693 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:40:08.105Z,1520700008.105 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:40:08.502Z,1520700008.502 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:40:08.900Z,1520700008.900 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:40:09.303Z,1520700009.303 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:40:09.706Z,1520700009.706 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:40:10.111Z,1520700010.111 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:40:10.504Z,1520700010.504 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:40:10.904Z,1520700010.904 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:40:11.292Z,1520700011.292 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:40:11.687Z,1520700011.687 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:40:12.096Z,1520700012.096 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:40:12.488Z,1520700012.488 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:40:12.886Z,1520700012.886 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:40:13.312Z,1520700013.312 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:40:13.717Z,1520700013.717 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:40:14.094Z,1520700014.094 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:40:14.524Z,1520700014.524 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:40:14.912Z,1520700014.912 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:40:15.316Z,1520700015.316 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:40:15.723Z,1520700015.723 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:40:16.093Z,1520700016.093 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:40:16.501Z,1520700016.501 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:40:16.893Z,1520700016.893 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:40:17.297Z,1520700017.297 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:40:17.701Z,1520700017.701 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:40:18.097Z,1520700018.097 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:40:18.500Z,1520700018.500 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:40:18.901Z,1520700018.901 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:40:19.310Z,1520700019.310 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:40:19.707Z,1520700019.707 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:40:20.105Z,1520700020.105 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:40:20.510Z,1520700020.510 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:40:20.907Z,1520700020.907 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:40:21.296Z,1520700021.296 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:40:21.693Z,1520700021.693 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:40:22.096Z,1520700022.096 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:40:22.496Z,1520700022.496 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:40:22.896Z,1520700022.896 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:40:23.296Z,1520700023.296 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:40:23.689Z,1520700023.689 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:40:24.092Z,1520700024.092 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:40:24.492Z,1520700024.492 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:40:24.904Z,1520700024.904 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:40:25.303Z,1520700025.303 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:40:25.342Z,1520700025.342 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T16:40:25.342Z,1520700025.342 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 150
2018-03-10T16:40:25.342Z,1520700025.342 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-10T16:40:25.364Z,1520700025.364 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-10T16:40:25.711Z,1520700025.711 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:40:25.748Z,1520700025.748 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-10T16:40:25.748Z,1520700025.748 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 150
2018-03-10T16:40:26.108Z,1520700026.108 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:40:26.129Z,1520700026.129 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-10T16:40:26.130Z,1520700026.130 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-10T16:40:26.130Z,1520700026.130 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-10T16:40:26.492Z,1520700026.492 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:40:26.914Z,1520700026.914 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:40:27.297Z,1520700027.297 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:40:27.713Z,1520700027.713 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:40:28.093Z,1520700028.093 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:40:28.493Z,1520700028.493 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:40:28.892Z,1520700028.892 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:40:29.292Z,1520700029.292 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:40:29.693Z,1520700029.693 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:40:30.112Z,1520700030.112 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:40:30.513Z,1520700030.513 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:40:30.899Z,1520700030.899 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:40:31.311Z,1520700031.311 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:40:31.692Z,1520700031.692 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:40:32.097Z,1520700032.097 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:40:32.517Z,1520700032.517 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:40:32.894Z,1520700032.894 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:40:33.305Z,1520700033.305 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:40:33.702Z,1520700033.702 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:40:34.101Z,1520700034.101 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:40:34.501Z,1520700034.501 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:40:34.901Z,1520700034.901 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:40:35.311Z,1520700035.311 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:40:35.703Z,1520700035.703 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:40:36.107Z,1520700036.107 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:40:36.507Z,1520700036.507 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:40:36.892Z,1520700036.892 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:40:37.301Z,1520700037.301 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:40:37.702Z,1520700037.702 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:40:38.092Z,1520700038.092 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:40:38.510Z,1520700038.510 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:40:38.902Z,1520700038.902 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:40:39.292Z,1520700039.292 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:40:39.700Z,1520700039.700 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:40:40.099Z,1520700040.099 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:40:40.512Z,1520700040.512 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:40:40.911Z,1520700040.911 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:40:41.309Z,1520700041.309 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:40:41.704Z,1520700041.704 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:40:42.100Z,1520700042.100 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:40:42.502Z,1520700042.502 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:40:42.900Z,1520700042.900 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:40:43.299Z,1520700043.299 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:40:43.688Z,1520700043.688 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:40:44.089Z,1520700044.089 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:40:44.493Z,1520700044.493 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:40:47.784Z,1520700047.784 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:40:47.937Z,1520700047.937 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:40:48.332Z,1520700048.332 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:40:48.699Z,1520700048.699 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:40:49.089Z,1520700049.089 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:40:49.488Z,1520700049.488 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:40:49.886Z,1520700049.886 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:40:50.289Z,1520700050.289 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:40:50.686Z,1520700050.686 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:40:51.090Z,1520700051.090 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:40:51.493Z,1520700051.493 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:40:51.884Z,1520700051.884 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:40:52.281Z,1520700052.281 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:40:52.691Z,1520700052.691 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:40:53.100Z,1520700053.100 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:40:53.499Z,1520700053.499 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:40:53.897Z,1520700053.897 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:40:54.296Z,1520700054.296 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:40:54.697Z,1520700054.697 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:40:55.087Z,1520700055.087 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:40:55.489Z,1520700055.489 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:40:55.918Z,1520700055.918 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:40:56.296Z,1520700056.296 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:40:56.686Z,1520700056.686 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:40:57.086Z,1520700057.086 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:40:57.486Z,1520700057.486 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:40:57.899Z,1520700057.899 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:40:58.291Z,1520700058.291 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:40:58.695Z,1520700058.695 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:40:59.095Z,1520700059.095 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:40:59.489Z,1520700059.489 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:40:59.877Z,1520700059.877 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:41:00.280Z,1520700060.280 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:41:00.694Z,1520700060.694 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:41:01.091Z,1520700061.091 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:41:01.484Z,1520700061.484 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:41:01.881Z,1520700061.881 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:41:02.285Z,1520700062.285 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:41:02.683Z,1520700062.683 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:41:03.118Z,1520700063.118 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:41:03.495Z,1520700063.495 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:41:03.911Z,1520700063.911 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:41:04.291Z,1520700064.291 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:41:04.686Z,1520700064.686 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:41:05.085Z,1520700065.085 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:41:05.485Z,1520700065.485 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:41:05.889Z,1520700065.889 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:41:06.286Z,1520700066.286 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:41:06.689Z,1520700066.689 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:41:07.089Z,1520700067.089 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:41:07.484Z,1520700067.484 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:41:07.889Z,1520700067.889 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:41:08.292Z,1520700068.292 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:41:08.702Z,1520700068.702 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:41:09.104Z,1520700069.104 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:41:09.492Z,1520700069.492 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:41:09.885Z,1520700069.885 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:41:10.289Z,1520700070.289 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:41:10.682Z,1520700070.682 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:41:11.089Z,1520700071.089 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:41:11.491Z,1520700071.491 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:41:11.892Z,1520700071.892 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:41:12.289Z,1520700072.289 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:41:12.685Z,1520700072.685 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:41:13.084Z,1520700073.084 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:41:13.504Z,1520700073.504 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:41:13.903Z,1520700073.903 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:41:14.300Z,1520700074.300 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:41:14.691Z,1520700074.691 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:41:15.081Z,1520700075.081 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:41:15.478Z,1520700075.478 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:41:15.889Z,1520700075.889 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:41:16.290Z,1520700076.290 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:41:16.677Z,1520700076.677 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:41:17.084Z,1520700077.084 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:41:17.494Z,1520700077.494 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:41:17.881Z,1520700077.881 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:41:18.285Z,1520700078.285 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:41:18.705Z,1520700078.705 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:41:19.104Z,1520700079.104 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:41:19.502Z,1520700079.502 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:41:19.891Z,1520700079.891 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:41:20.281Z,1520700080.281 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:41:20.681Z,1520700080.681 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:41:21.082Z,1520700081.082 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:41:21.487Z,1520700081.487 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:41:21.892Z,1520700081.892 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:41:22.289Z,1520700082.289 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:41:22.683Z,1520700082.683 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:41:23.088Z,1520700083.088 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:41:23.488Z,1520700083.488 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:41:23.896Z,1520700083.896 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:41:24.300Z,1520700084.300 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:41:24.705Z,1520700084.705 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:41:25.104Z,1520700085.104 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:41:25.503Z,1520700085.503 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:41:25.878Z,1520700085.878 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:41:26.285Z,1520700086.285 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:41:26.681Z,1520700086.681 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:41:27.080Z,1520700087.080 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:41:27.477Z,1520700087.477 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:41:27.885Z,1520700087.885 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:41:28.281Z,1520700088.281 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:41:28.685Z,1520700088.685 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:41:29.091Z,1520700089.091 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:41:29.494Z,1520700089.494 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:41:29.899Z,1520700089.899 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:41:30.299Z,1520700090.299 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:41:30.682Z,1520700090.682 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:41:31.093Z,1520700091.093 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:41:31.490Z,1520700091.490 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:41:31.889Z,1520700091.889 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:41:32.288Z,1520700092.288 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:41:32.684Z,1520700092.684 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:41:33.094Z,1520700093.094 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:41:33.481Z,1520700093.481 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:41:33.880Z,1520700093.880 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:41:34.304Z,1520700094.304 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:41:34.700Z,1520700094.700 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:41:35.100Z,1520700095.100 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:41:35.491Z,1520700095.491 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:41:35.885Z,1520700095.885 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:41:36.280Z,1520700096.280 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:41:36.685Z,1520700096.685 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:41:37.086Z,1520700097.086 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:41:37.486Z,1520700097.486 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:41:37.893Z,1520700097.893 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:41:38.288Z,1520700098.288 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:41:38.688Z,1520700098.688 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:41:39.086Z,1520700099.086 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:41:39.503Z,1520700099.503 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:41:39.902Z,1520700099.902 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:41:40.305Z,1520700100.305 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:41:40.703Z,1520700100.703 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:41:41.084Z,1520700101.084 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:41:41.477Z,1520700101.477 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:41:41.881Z,1520700101.881 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:41:42.285Z,1520700102.285 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:41:42.689Z,1520700102.689 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:41:43.090Z,1520700103.090 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:41:43.490Z,1520700103.490 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:41:43.885Z,1520700103.885 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:41:44.284Z,1520700104.284 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:41:44.725Z,1520700104.725 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:41:49.238Z,1520700109.238 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:41:49.445Z,1520700109.445 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:41:49.841Z,1520700109.841 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:41:50.244Z,1520700110.244 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:41:50.613Z,1520700110.613 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:41:51.016Z,1520700111.016 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:41:51.409Z,1520700111.409 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:41:51.821Z,1520700111.821 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:41:52.216Z,1520700112.216 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:41:52.616Z,1520700112.616 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:41:53.021Z,1520700113.021 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:41:53.420Z,1520700113.420 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:41:53.824Z,1520700113.824 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:41:54.223Z,1520700114.223 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:41:54.624Z,1520700114.624 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:41:55.024Z,1520700115.024 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:41:55.409Z,1520700115.409 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:41:55.818Z,1520700115.818 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:41:56.215Z,1520700116.215 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:41:56.619Z,1520700116.619 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:41:57.027Z,1520700117.027 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:41:57.405Z,1520700117.405 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:41:57.820Z,1520700117.820 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:41:58.225Z,1520700118.225 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:41:58.620Z,1520700118.620 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:41:59.023Z,1520700119.023 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:41:59.427Z,1520700119.427 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:41:59.827Z,1520700119.827 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:42:00.216Z,1520700120.216 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:42:00.614Z,1520700120.614 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:42:01.014Z,1520700121.014 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:42:01.416Z,1520700121.416 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:42:01.820Z,1520700121.820 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:42:02.214Z,1520700122.214 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:42:02.617Z,1520700122.617 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:42:03.012Z,1520700123.012 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:42:03.411Z,1520700123.411 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:42:03.816Z,1520700123.816 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:42:04.226Z,1520700124.226 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:42:04.623Z,1520700124.623 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:42:05.031Z,1520700125.031 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:42:05.423Z,1520700125.423 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:42:05.810Z,1520700125.810 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:42:06.210Z,1520700126.210 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:42:06.610Z,1520700126.610 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:42:07.017Z,1520700127.017 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:42:07.413Z,1520700127.413 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:42:07.810Z,1520700127.810 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:42:08.217Z,1520700128.217 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:42:08.616Z,1520700128.616 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:42:09.016Z,1520700129.016 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:42:09.423Z,1520700129.423 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:42:09.822Z,1520700129.822 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:42:10.235Z,1520700130.235 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:42:10.623Z,1520700130.623 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:42:11.010Z,1520700131.010 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:42:11.404Z,1520700131.404 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:42:11.811Z,1520700131.811 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:42:12.209Z,1520700132.209 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:42:12.605Z,1520700132.605 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:42:13.007Z,1520700133.007 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:42:13.406Z,1520700133.406 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:42:13.812Z,1520700133.812 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:42:14.206Z,1520700134.206 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:42:14.619Z,1520700134.619 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:42:15.020Z,1520700135.020 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:42:15.415Z,1520700135.415 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:42:15.829Z,1520700135.829 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:42:16.216Z,1520700136.216 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:42:16.611Z,1520700136.611 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:42:17.021Z,1520700137.021 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:42:17.404Z,1520700137.404 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:42:17.804Z,1520700137.804 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:42:18.209Z,1520700138.209 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:42:18.605Z,1520700138.605 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:42:19.004Z,1520700139.004 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:42:19.409Z,1520700139.409 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:42:19.828Z,1520700139.828 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:42:20.224Z,1520700140.224 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:42:20.628Z,1520700140.628 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:42:21.023Z,1520700141.023 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:42:21.406Z,1520700141.406 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:42:21.821Z,1520700141.821 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:42:22.204Z,1520700142.204 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:42:22.605Z,1520700142.605 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:42:23.009Z,1520700143.009 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:42:23.409Z,1520700143.409 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:42:23.805Z,1520700143.805 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:42:24.205Z,1520700144.205 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:42:24.605Z,1520700144.605 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:42:25.028Z,1520700145.028 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:42:25.424Z,1520700145.424 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:42:25.821Z,1520700145.821 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:42:26.228Z,1520700146.228 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:42:26.609Z,1520700146.609 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:42:27.004Z,1520700147.004 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:42:27.404Z,1520700147.404 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:42:27.809Z,1520700147.809 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:42:28.211Z,1520700148.211 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:42:28.611Z,1520700148.611 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:42:29.013Z,1520700149.013 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:42:29.412Z,1520700149.412 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:42:29.814Z,1520700149.814 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:42:30.216Z,1520700150.216 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:42:30.631Z,1520700150.631 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:42:31.021Z,1520700151.021 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:42:31.424Z,1520700151.424 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:42:31.822Z,1520700151.822 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:42:32.212Z,1520700152.212 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:42:32.608Z,1520700152.608 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:42:33.017Z,1520700153.017 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:42:33.422Z,1520700153.422 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:42:33.806Z,1520700153.806 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:42:34.218Z,1520700154.218 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:42:34.605Z,1520700154.605 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:42:35.006Z,1520700155.006 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:42:35.426Z,1520700155.426 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:42:35.830Z,1520700155.830 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:42:36.232Z,1520700156.232 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:42:36.624Z,1520700156.624 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:42:37.026Z,1520700157.026 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:42:37.415Z,1520700157.415 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:42:37.804Z,1520700157.804 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:42:38.209Z,1520700158.209 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:42:38.613Z,1520700158.613 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:42:39.016Z,1520700159.016 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:42:39.414Z,1520700159.414 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:42:39.814Z,1520700159.814 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:42:40.210Z,1520700160.210 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:42:40.627Z,1520700160.627 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:42:41.026Z,1520700161.026 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:42:41.421Z,1520700161.421 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:42:41.825Z,1520700161.825 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:42:42.215Z,1520700162.215 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:42:42.621Z,1520700162.621 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:42:43.004Z,1520700163.004 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:42:43.401Z,1520700163.401 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:42:43.805Z,1520700163.805 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:42:44.205Z,1520700164.205 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:42:44.606Z,1520700164.606 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:42:45.004Z,1520700165.004 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:42:48.191Z,1520700168.191 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:42:48.328Z,1520700168.328 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:42:48.699Z,1520700168.699 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:42:49.091Z,1520700169.091 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:42:49.481Z,1520700169.481 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:42:49.884Z,1520700169.884 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:42:50.284Z,1520700170.284 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:42:50.684Z,1520700170.684 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:42:51.084Z,1520700171.084 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:42:51.485Z,1520700171.485 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:42:51.885Z,1520700171.885 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:42:52.283Z,1520700172.283 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:42:52.682Z,1520700172.682 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:42:53.095Z,1520700173.095 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:42:53.495Z,1520700173.495 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:42:53.922Z,1520700173.922 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:42:54.295Z,1520700174.295 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:42:54.682Z,1520700174.682 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:42:55.088Z,1520700175.088 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:42:55.476Z,1520700175.476 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:42:55.886Z,1520700175.886 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:42:56.289Z,1520700176.289 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:42:56.677Z,1520700176.677 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:42:57.076Z,1520700177.076 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:42:57.477Z,1520700177.477 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:42:57.880Z,1520700177.880 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:42:58.291Z,1520700178.291 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:42:58.702Z,1520700178.702 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:42:59.101Z,1520700179.101 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:42:59.502Z,1520700179.502 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:42:59.881Z,1520700179.881 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:43:00.285Z,1520700180.285 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:43:00.681Z,1520700180.681 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:43:01.088Z,1520700181.088 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:43:01.485Z,1520700181.485 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:43:01.884Z,1520700181.884 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:43:02.287Z,1520700182.287 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:43:02.684Z,1520700182.684 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:43:03.086Z,1520700183.086 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:43:03.491Z,1520700183.491 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:43:03.895Z,1520700183.895 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:43:04.302Z,1520700184.302 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:43:04.702Z,1520700184.702 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:43:05.085Z,1520700185.085 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:43:05.484Z,1520700185.484 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:43:05.882Z,1520700185.882 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:43:06.285Z,1520700186.285 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:43:06.682Z,1520700186.682 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:43:07.086Z,1520700187.086 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:43:07.488Z,1520700187.488 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:43:07.889Z,1520700187.889 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:43:08.285Z,1520700188.285 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:43:08.695Z,1520700188.695 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:43:09.096Z,1520700189.096 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:43:09.497Z,1520700189.497 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:43:09.895Z,1520700189.895 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:43:10.282Z,1520700190.282 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:43:10.684Z,1520700190.684 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:43:11.084Z,1520700191.084 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:43:11.480Z,1520700191.480 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:43:11.890Z,1520700191.890 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:43:12.277Z,1520700192.277 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:43:12.677Z,1520700192.677 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:43:13.077Z,1520700193.077 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:43:13.481Z,1520700193.481 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:43:13.905Z,1520700193.905 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:43:14.296Z,1520700194.296 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:43:14.700Z,1520700194.700 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:43:15.096Z,1520700195.096 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:43:15.481Z,1520700195.481 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:43:15.881Z,1520700195.881 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:43:16.276Z,1520700196.276 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:43:16.678Z,1520700196.678 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:43:17.082Z,1520700197.082 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:43:17.485Z,1520700197.485 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:43:17.881Z,1520700197.881 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:43:18.285Z,1520700198.285 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:43:18.684Z,1520700198.684 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:43:19.095Z,1520700199.095 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:43:19.500Z,1520700199.500 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:43:19.896Z,1520700199.896 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:43:20.300Z,1520700200.300 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:43:20.688Z,1520700200.688 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:43:21.088Z,1520700201.088 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:43:21.477Z,1520700201.477 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:43:21.889Z,1520700201.889 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:43:22.277Z,1520700202.277 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:43:22.680Z,1520700202.680 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:43:23.081Z,1520700203.081 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:43:23.475Z,1520700203.475 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:43:23.876Z,1520700203.876 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:43:24.297Z,1520700204.297 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:43:24.695Z,1520700204.695 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:43:25.100Z,1520700205.100 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:43:25.492Z,1520700205.492 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:43:25.880Z,1520700205.880 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:43:26.277Z,1520700206.277 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:43:26.334Z,1520700206.334 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T16:43:26.334Z,1520700206.334 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 151
2018-03-10T16:43:26.334Z,1520700206.334 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-10T16:43:26.359Z,1520700206.359 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-10T16:43:26.677Z,1520700206.677 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:43:26.771Z,1520700206.771 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-10T16:43:26.771Z,1520700206.771 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 151
2018-03-10T16:43:27.080Z,1520700207.080 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:43:27.124Z,1520700207.124 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-10T16:43:27.124Z,1520700207.124 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-10T16:43:27.124Z,1520700207.124 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-10T16:43:27.481Z,1520700207.481 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:43:27.882Z,1520700207.882 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:43:28.282Z,1520700208.282 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:43:28.685Z,1520700208.685 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:43:29.086Z,1520700209.086 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:43:29.495Z,1520700209.495 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:43:29.899Z,1520700209.899 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:43:30.293Z,1520700210.293 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:43:30.699Z,1520700210.699 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:43:31.082Z,1520700211.082 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:43:31.477Z,1520700211.477 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:43:31.876Z,1520700211.876 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:43:32.276Z,1520700212.276 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:43:32.677Z,1520700212.677 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:43:33.080Z,1520700213.080 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:43:33.480Z,1520700213.480 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:43:33.881Z,1520700213.881 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:43:34.276Z,1520700214.276 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:43:34.708Z,1520700214.708 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:43:35.095Z,1520700215.095 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:43:35.495Z,1520700215.495 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:43:35.895Z,1520700215.895 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:43:36.285Z,1520700216.285 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:43:36.684Z,1520700216.684 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:43:37.084Z,1520700217.084 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:43:37.486Z,1520700217.486 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:43:37.884Z,1520700217.884 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:43:38.285Z,1520700218.285 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:43:38.681Z,1520700218.681 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:43:39.084Z,1520700219.084 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:43:39.489Z,1520700219.489 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:43:39.894Z,1520700219.894 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:43:40.295Z,1520700220.295 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:43:40.698Z,1520700220.698 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:43:41.095Z,1520700221.095 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:43:41.476Z,1520700221.476 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:43:41.877Z,1520700221.877 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:43:42.282Z,1520700222.282 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:43:42.682Z,1520700222.682 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:43:43.078Z,1520700223.078 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:43:43.482Z,1520700223.482 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:43:43.888Z,1520700223.888 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:43:44.285Z,1520700224.285 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:43:44.319Z,1520700224.319 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-03-10T16:38:44.1Z
2018-03-10T16:43:44.319Z,1520700224.319 [Default:CheckIn:Read_GPS] Stopped
2018-03-10T16:43:44.319Z,1520700224.319 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-03-10T16:43:44.677Z,1520700224.677 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:43:45.242Z,1520700225.242 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:43:48.419Z,1520700228.419 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:43:48.573Z,1520700228.573 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:43:48.907Z,1520700228.907 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20180310T051512/Courier0268.lzma
2018-03-10T16:43:48.939Z,1520700228.939 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:43:49.325Z,1520700229.325 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:43:49.706Z,1520700229.706 [DataOverHttps](INFO): Moved sent file to Logs/20180310T051512/Courier0268.lzma.bak
2018-03-10T16:43:49.706Z,1520700229.706 [DataOverHttps](INFO): SBD MOMSN=8006155
2018-03-10T16:43:49.731Z,1520700229.731 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:43:50.414Z,1520700230.414 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:43:50.527Z,1520700230.527 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:43:50.929Z,1520700230.929 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:43:54.189Z,1520700234.189 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:43:54.353Z,1520700234.353 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:43:54.696Z,1520700234.696 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:43:55.096Z,1520700235.096 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:43:55.478Z,1520700235.478 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:43:55.887Z,1520700235.887 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:43:56.278Z,1520700236.278 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:43:59.418Z,1520700239.418 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:43:59.598Z,1520700239.598 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:43:59.879Z,1520700239.879 [DataOverHttps](INFO): Sending 226 bytes from file Logs/20180310T051512/Express0269.lzma
2018-03-10T16:43:59.940Z,1520700239.940 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:44:00.327Z,1520700240.327 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:44:05.405Z,1520700245.405 [DataOverHttps](INFO): Moved sent file to Logs/20180310T051512/Express0269.lzma.bak
2018-03-10T16:44:05.405Z,1520700245.405 [DataOverHttps](INFO): SBD MOMSN=8006157
2018-03-10T16:44:05.412Z,1520700245.412 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session.
2018-03-10T16:44:05.435Z,1520700245.435 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:44:05.934Z,1520700245.934 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:44:05.955Z,1520700245.955 [Default:CheckIn:Read_Iridium] Stopped
2018-03-10T16:44:05.955Z,1520700245.955 [Default:CheckIn:C.Wait] Running Loop=1
2018-03-10T16:44:05.955Z,1520700245.955 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-03-10T16:44:06.054Z,1520700246.054 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:44:06.439Z,1520700246.439 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:44:09.662Z,1520700249.662 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:44:09.788Z,1520700249.788 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:44:10.149Z,1520700250.149 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:44:10.539Z,1520700250.539 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:44:10.946Z,1520700250.946 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:44:11.340Z,1520700251.340 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:44:11.731Z,1520700251.731 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:44:12.142Z,1520700252.142 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:44:12.548Z,1520700252.548 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:44:12.945Z,1520700252.945 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:44:13.344Z,1520700253.344 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:44:13.746Z,1520700253.746 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:44:14.132Z,1520700254.132 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:44:14.540Z,1520700254.540 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:44:14.940Z,1520700254.940 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:44:15.332Z,1520700255.332 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:44:15.741Z,1520700255.741 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:44:16.136Z,1520700256.136 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:44:16.540Z,1520700256.540 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:44:16.934Z,1520700256.934 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:44:17.337Z,1520700257.337 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:44:17.737Z,1520700257.737 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:44:18.134Z,1520700258.134 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:44:18.542Z,1520700258.542 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:44:18.550Z,1520700258.550 [BPC1](ERROR): Failed to receive battery data
2018-03-10T16:44:18.550Z,1520700258.550 [BPC1] Communications Fault, FailCount= 1
2018-03-10T16:44:18.550Z,1520700258.550 [BPC1](ERROR): Communications Fault
2018-03-10T16:44:18.619Z,1520700258.619 [CBIT](ERROR): Communications Fault in component: BPC1
2018-03-10T16:44:18.942Z,1520700258.942 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:44:19.344Z,1520700259.344 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:44:19.754Z,1520700259.754 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:44:19.804Z,1520700259.804 [CBIT](INFO): Clearing failed state for component BPC1
2018-03-10T16:44:19.804Z,1520700259.804 [BPC1] No Fault, FailCount= 1
2018-03-10T16:44:20.142Z,1520700260.142 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:44:20.541Z,1520700260.541 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:44:20.945Z,1520700260.945 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:44:21.345Z,1520700261.345 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:44:21.739Z,1520700261.739 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:44:22.140Z,1520700262.140 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:44:22.540Z,1520700262.540 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:44:22.937Z,1520700262.937 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:44:23.342Z,1520700263.342 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:44:23.776Z,1520700263.776 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:44:24.148Z,1520700264.148 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:44:24.548Z,1520700264.548 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:44:24.932Z,1520700264.932 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:44:25.333Z,1520700265.333 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:44:25.758Z,1520700265.758 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:44:26.132Z,1520700266.132 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:44:26.534Z,1520700266.534 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:44:26.956Z,1520700266.956 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:44:27.337Z,1520700267.337 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:44:27.732Z,1520700267.732 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:44:28.136Z,1520700268.136 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:44:28.532Z,1520700268.532 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:44:28.934Z,1520700268.934 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:44:29.339Z,1520700269.339 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:44:29.736Z,1520700269.736 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:44:30.134Z,1520700270.134 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:44:30.540Z,1520700270.540 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:44:30.932Z,1520700270.932 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:44:31.340Z,1520700271.340 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:44:31.736Z,1520700271.736 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:44:32.137Z,1520700272.137 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:44:32.532Z,1520700272.532 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:44:32.936Z,1520700272.936 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:44:33.341Z,1520700273.341 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:44:33.741Z,1520700273.741 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:44:34.141Z,1520700274.141 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:44:34.545Z,1520700274.545 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:44:34.942Z,1520700274.942 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:44:35.342Z,1520700275.342 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:44:35.747Z,1520700275.747 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:44:36.116Z,1520700276.116 [NAL9602](INFO): Powering down
2018-03-10T16:44:36.149Z,1520700276.149 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:44:36.540Z,1520700276.540 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:44:36.933Z,1520700276.933 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:44:37.336Z,1520700277.336 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:44:37.755Z,1520700277.755 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:44:38.138Z,1520700278.138 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:44:38.538Z,1520700278.538 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:44:38.938Z,1520700278.938 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:44:39.338Z,1520700279.338 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:44:39.738Z,1520700279.738 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:44:40.142Z,1520700280.142 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:44:40.541Z,1520700280.541 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:44:40.940Z,1520700280.940 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:44:41.352Z,1520700281.352 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:44:41.748Z,1520700281.748 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:44:42.140Z,1520700282.140 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:44:42.540Z,1520700282.540 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:44:42.943Z,1520700282.943 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:44:43.344Z,1520700283.344 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:44:43.746Z,1520700283.746 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:44:44.145Z,1520700284.145 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:44:44.534Z,1520700284.534 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:44:44.945Z,1520700284.945 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:44:45.343Z,1520700285.343 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:44:45.734Z,1520700285.734 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:44:46.143Z,1520700286.143 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:44:46.549Z,1520700286.549 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:44:46.934Z,1520700286.934 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:44:47.344Z,1520700287.344 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:44:47.748Z,1520700287.748 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:44:48.134Z,1520700288.134 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:44:48.554Z,1520700288.554 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:44:48.936Z,1520700288.936 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:44:49.348Z,1520700289.348 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:44:49.736Z,1520700289.736 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:44:50.136Z,1520700290.136 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:44:50.534Z,1520700290.534 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:44:50.548Z,1520700290.548 [BPC1](FAULT): Failed to initialize
2018-03-10T16:44:50.548Z,1520700290.548 [BPC1] Communications Fault, FailCount= 2
2018-03-10T16:44:50.548Z,1520700290.548 [BPC1](ERROR): Communications Fault
2018-03-10T16:44:50.610Z,1520700290.610 [CBIT](ERROR): Communications Fault in component: BPC1
2018-03-10T16:44:50.936Z,1520700290.936 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:44:51.336Z,1520700291.336 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:44:51.736Z,1520700291.736 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:44:51.793Z,1520700291.793 [CBIT](INFO): Clearing failed state for component BPC1
2018-03-10T16:44:51.793Z,1520700291.793 [BPC1] No Fault, FailCount= 2
2018-03-10T16:44:52.136Z,1520700292.136 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:44:52.536Z,1520700292.536 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:44:52.932Z,1520700292.932 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:44:53.337Z,1520700293.337 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:44:53.736Z,1520700293.736 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:44:54.140Z,1520700294.140 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:44:54.537Z,1520700294.537 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:44:54.938Z,1520700294.938 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:44:55.342Z,1520700295.342 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:44:55.746Z,1520700295.746 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:44:56.146Z,1520700296.146 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:44:56.538Z,1520700296.538 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:44:56.945Z,1520700296.945 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:44:57.349Z,1520700297.349 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:44:57.745Z,1520700297.745 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:44:58.145Z,1520700298.145 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:44:58.544Z,1520700298.544 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:44:58.944Z,1520700298.944 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:44:59.344Z,1520700299.344 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:44:59.748Z,1520700299.748 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:45:00.149Z,1520700300.149 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:45:00.544Z,1520700300.544 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:45:00.948Z,1520700300.948 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:45:01.340Z,1520700301.340 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:45:01.744Z,1520700301.744 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:45:02.132Z,1520700302.132 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:45:02.532Z,1520700302.532 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:45:02.944Z,1520700302.944 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:45:03.344Z,1520700303.344 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:45:03.734Z,1520700303.734 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:45:04.136Z,1520700304.136 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:45:04.536Z,1520700304.536 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:45:04.948Z,1520700304.948 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:45:05.356Z,1520700305.356 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:45:05.736Z,1520700305.736 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:45:06.136Z,1520700306.136 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:45:06.535Z,1520700306.535 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:45:09.667Z,1520700309.667 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:45:09.780Z,1520700309.780 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:45:10.179Z,1520700310.179 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:45:10.578Z,1520700310.578 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:45:10.977Z,1520700310.977 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:45:11.379Z,1520700311.379 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:45:11.779Z,1520700311.779 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:45:12.174Z,1520700312.174 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:45:12.575Z,1520700312.575 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:45:12.979Z,1520700312.979 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:45:13.375Z,1520700313.375 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:45:13.779Z,1520700313.779 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:45:14.172Z,1520700314.172 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:45:14.575Z,1520700314.575 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:45:14.983Z,1520700314.983 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:45:15.377Z,1520700315.377 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:45:15.766Z,1520700315.766 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:45:16.184Z,1520700316.184 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:45:16.582Z,1520700316.582 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:45:16.978Z,1520700316.978 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:45:17.377Z,1520700317.377 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:45:17.781Z,1520700317.781 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:45:18.175Z,1520700318.175 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:45:18.582Z,1520700318.582 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:45:18.981Z,1520700318.981 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:45:19.364Z,1520700319.364 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:45:19.770Z,1520700319.770 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:45:20.182Z,1520700320.182 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:45:20.564Z,1520700320.564 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:45:20.984Z,1520700320.984 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:45:21.383Z,1520700321.383 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:45:21.768Z,1520700321.768 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:45:22.168Z,1520700322.168 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:45:22.574Z,1520700322.574 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:45:22.596Z,1520700322.596 [BPC1](FAULT): Failed to initialize
2018-03-10T16:45:22.596Z,1520700322.596 [BPC1] Communications Fault, FailCount= 3
2018-03-10T16:45:22.596Z,1520700322.596 [BPC1](ERROR): Communications Fault
2018-03-10T16:45:22.619Z,1520700322.619 [CBIT](ERROR): Communications Fault in component: BPC1
2018-03-10T16:45:22.966Z,1520700322.966 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:45:23.370Z,1520700323.370 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:45:23.768Z,1520700323.768 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:45:23.827Z,1520700323.827 [CBIT](INFO): Clearing failed state for component BPC1
2018-03-10T16:45:23.827Z,1520700323.827 [BPC1] No Fault, FailCount= 3
2018-03-10T16:45:24.173Z,1520700324.173 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:45:24.576Z,1520700324.576 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:45:24.976Z,1520700324.976 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:45:25.369Z,1520700325.369 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:45:25.775Z,1520700325.775 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:45:26.175Z,1520700326.175 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:45:26.572Z,1520700326.572 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:45:26.973Z,1520700326.973 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:45:27.379Z,1520700327.379 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:45:27.771Z,1520700327.771 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:45:28.179Z,1520700328.179 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:45:28.577Z,1520700328.577 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:45:28.974Z,1520700328.974 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:45:29.375Z,1520700329.375 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:45:29.784Z,1520700329.784 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:45:30.175Z,1520700330.175 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:45:30.574Z,1520700330.574 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:45:30.972Z,1520700330.972 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:45:31.376Z,1520700331.376 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:45:31.774Z,1520700331.774 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:45:32.170Z,1520700332.170 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:45:32.571Z,1520700332.571 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:45:32.979Z,1520700332.979 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:45:33.373Z,1520700333.373 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:45:33.774Z,1520700333.774 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:45:34.175Z,1520700334.175 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:45:34.580Z,1520700334.580 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:45:34.978Z,1520700334.978 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:45:35.379Z,1520700335.379 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:45:35.775Z,1520700335.775 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:45:36.179Z,1520700336.179 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:45:36.577Z,1520700336.577 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:45:36.979Z,1520700336.979 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:45:37.376Z,1520700337.376 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:45:37.782Z,1520700337.782 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:45:38.184Z,1520700338.184 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:45:38.581Z,1520700338.581 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:45:38.990Z,1520700338.990 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:45:39.364Z,1520700339.364 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:45:39.765Z,1520700339.765 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:45:40.164Z,1520700340.164 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:45:40.568Z,1520700340.568 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:45:40.966Z,1520700340.966 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:45:41.372Z,1520700341.372 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:45:41.761Z,1520700341.761 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:45:41.813Z,1520700341.813 [CBIT](DEBUG): EFC running - data check-sum false
2018-03-10T16:45:42.170Z,1520700342.170 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:45:42.573Z,1520700342.573 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:45:42.968Z,1520700342.968 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:45:43.368Z,1520700343.368 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:45:43.771Z,1520700343.771 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:45:44.173Z,1520700344.173 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:45:44.569Z,1520700344.569 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:45:44.968Z,1520700344.968 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:45:45.368Z,1520700345.368 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:45:45.776Z,1520700345.776 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:45:46.176Z,1520700346.176 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:45:46.562Z,1520700346.562 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:45:46.979Z,1520700346.979 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:45:47.379Z,1520700347.379 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:45:47.769Z,1520700347.769 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:45:48.179Z,1520700348.179 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:45:48.580Z,1520700348.580 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:45:48.976Z,1520700348.976 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:45:49.376Z,1520700349.376 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:45:49.788Z,1520700349.788 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:45:50.179Z,1520700350.179 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:45:50.578Z,1520700350.578 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:45:50.987Z,1520700350.987 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:45:51.377Z,1520700351.377 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:45:51.779Z,1520700351.779 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:45:52.178Z,1520700352.178 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:45:52.573Z,1520700352.573 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:45:52.977Z,1520700352.977 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:45:53.377Z,1520700353.377 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:45:53.774Z,1520700353.774 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:45:54.177Z,1520700354.177 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:45:54.580Z,1520700354.580 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:45:54.599Z,1520700354.599 [BPC1](FAULT): Failed to initialize
2018-03-10T16:45:54.599Z,1520700354.599 [BPC1] Communications Fault, FailCount= 4
2018-03-10T16:45:54.599Z,1520700354.599 [BPC1](ERROR): Communications Fault
2018-03-10T16:45:54.634Z,1520700354.634 [CBIT](ERROR): Communications Fault in component: BPC1
2018-03-10T16:45:54.966Z,1520700354.966 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:45:55.374Z,1520700355.374 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:45:55.790Z,1520700355.790 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:45:55.823Z,1520700355.823 [CBIT](INFO): Clearing failed state for component BPC1
2018-03-10T16:45:55.823Z,1520700355.823 [BPC1] No Fault, FailCount= 4
2018-03-10T16:45:56.167Z,1520700356.167 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:45:56.570Z,1520700356.570 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:45:56.970Z,1520700356.970 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:45:57.364Z,1520700357.364 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:45:57.774Z,1520700357.774 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:45:58.191Z,1520700358.191 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:45:58.568Z,1520700358.568 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:45:58.968Z,1520700358.968 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:45:59.368Z,1520700359.368 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:45:59.768Z,1520700359.768 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:46:00.174Z,1520700360.174 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:46:00.568Z,1520700360.568 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:46:00.966Z,1520700360.966 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:46:01.374Z,1520700361.374 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:46:01.770Z,1520700361.770 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:46:02.168Z,1520700362.168 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:46:02.569Z,1520700362.569 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:46:02.972Z,1520700362.972 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:46:03.366Z,1520700363.366 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:46:03.768Z,1520700363.768 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:46:04.178Z,1520700364.178 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:46:04.568Z,1520700364.568 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:46:04.974Z,1520700364.974 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:46:05.369Z,1520700365.369 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:46:05.766Z,1520700365.766 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:46:06.179Z,1520700366.179 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:46:06.579Z,1520700366.579 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:46:09.824Z,1520700369.824 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:46:09.973Z,1520700369.973 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:46:10.333Z,1520700370.333 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:46:10.738Z,1520700370.738 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:46:11.130Z,1520700371.130 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:46:11.525Z,1520700371.525 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:46:11.920Z,1520700371.920 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:46:12.326Z,1520700372.326 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:46:12.730Z,1520700372.730 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:46:13.116Z,1520700373.116 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:46:13.520Z,1520700373.520 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:46:13.922Z,1520700373.922 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:46:14.323Z,1520700374.323 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:46:14.739Z,1520700374.739 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:46:15.143Z,1520700375.143 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:46:15.550Z,1520700375.550 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:46:15.928Z,1520700375.928 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:46:16.338Z,1520700376.338 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:46:16.740Z,1520700376.740 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:46:17.136Z,1520700377.136 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:46:17.517Z,1520700377.517 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:46:17.929Z,1520700377.929 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:46:18.342Z,1520700378.342 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:46:18.722Z,1520700378.722 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:46:19.118Z,1520700379.118 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:46:19.520Z,1520700379.520 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:46:19.921Z,1520700379.921 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:46:20.321Z,1520700380.321 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:46:20.716Z,1520700380.716 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:46:21.137Z,1520700381.137 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:46:21.510Z,1520700381.510 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:46:21.918Z,1520700381.918 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:46:22.340Z,1520700382.340 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:46:22.734Z,1520700382.734 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:46:23.132Z,1520700383.132 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:46:23.534Z,1520700383.534 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:46:23.948Z,1520700383.948 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:46:24.326Z,1520700384.326 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:46:24.734Z,1520700384.734 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:46:25.134Z,1520700385.134 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:46:25.548Z,1520700385.548 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:46:25.936Z,1520700385.936 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:46:26.329Z,1520700386.329 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:46:26.729Z,1520700386.729 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:46:27.139Z,1520700387.139 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:46:27.158Z,1520700387.158 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T16:46:27.158Z,1520700387.158 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 152
2018-03-10T16:46:27.158Z,1520700387.158 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-10T16:46:27.191Z,1520700387.191 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-10T16:46:27.536Z,1520700387.536 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:46:27.564Z,1520700387.564 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-10T16:46:27.565Z,1520700387.565 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 152
2018-03-10T16:46:27.918Z,1520700387.918 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:46:27.949Z,1520700387.949 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-10T16:46:27.950Z,1520700387.950 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-10T16:46:27.950Z,1520700387.950 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-10T16:46:28.316Z,1520700388.316 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:46:28.721Z,1520700388.721 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:46:29.124Z,1520700389.124 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:46:29.529Z,1520700389.529 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:46:29.955Z,1520700389.955 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:46:30.352Z,1520700390.352 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:46:30.721Z,1520700390.721 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:46:31.138Z,1520700391.138 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:46:31.557Z,1520700391.557 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:46:31.938Z,1520700391.938 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:46:32.314Z,1520700392.314 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:46:32.726Z,1520700392.726 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:46:33.141Z,1520700393.141 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:46:33.522Z,1520700393.522 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:46:33.926Z,1520700393.926 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:46:34.330Z,1520700394.330 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:46:34.728Z,1520700394.728 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:46:35.129Z,1520700395.129 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:46:35.524Z,1520700395.524 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:46:35.929Z,1520700395.929 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:46:36.315Z,1520700396.315 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:46:36.717Z,1520700396.717 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:46:37.113Z,1520700397.113 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:46:37.558Z,1520700397.558 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:46:37.950Z,1520700397.950 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:46:38.342Z,1520700398.342 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:46:38.740Z,1520700398.740 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:46:39.156Z,1520700399.156 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:46:39.556Z,1520700399.556 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:46:39.934Z,1520700399.934 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:46:40.348Z,1520700400.348 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:46:40.733Z,1520700400.733 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:46:41.127Z,1520700401.127 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:46:41.525Z,1520700401.525 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:46:41.929Z,1520700401.929 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:46:42.329Z,1520700402.329 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:46:42.725Z,1520700402.725 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:46:43.120Z,1520700403.120 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:46:43.518Z,1520700403.518 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:46:43.921Z,1520700403.921 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:46:44.367Z,1520700404.367 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:46:44.759Z,1520700404.759 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:46:45.146Z,1520700405.146 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:46:45.544Z,1520700405.544 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:46:45.957Z,1520700405.957 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:46:46.330Z,1520700406.330 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:46:46.743Z,1520700406.743 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:46:47.133Z,1520700407.133 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:46:47.529Z,1520700407.529 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:46:47.929Z,1520700407.929 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:46:48.333Z,1520700408.333 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:46:48.729Z,1520700408.729 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:46:49.125Z,1520700409.125 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:46:49.523Z,1520700409.523 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:46:49.922Z,1520700409.922 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:46:50.309Z,1520700410.309 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:46:50.740Z,1520700410.740 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:46:51.115Z,1520700411.115 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:46:51.524Z,1520700411.524 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:46:51.935Z,1520700411.935 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:46:52.335Z,1520700412.335 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:46:52.718Z,1520700412.718 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:46:53.150Z,1520700413.150 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:46:53.522Z,1520700413.522 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:46:53.930Z,1520700413.930 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:46:54.350Z,1520700414.350 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:46:54.728Z,1520700414.728 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:46:55.121Z,1520700415.121 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:46:55.518Z,1520700415.518 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:46:55.927Z,1520700415.927 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:46:56.329Z,1520700416.329 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:46:56.722Z,1520700416.722 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:46:57.122Z,1520700417.122 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:46:57.510Z,1520700417.510 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:46:57.926Z,1520700417.926 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:46:58.366Z,1520700418.366 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:46:58.735Z,1520700418.735 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:46:59.136Z,1520700419.136 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:46:59.533Z,1520700419.533 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:46:59.943Z,1520700419.943 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:47:00.348Z,1520700420.348 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:47:00.717Z,1520700420.717 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:47:01.125Z,1520700421.125 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:47:01.540Z,1520700421.540 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:47:01.926Z,1520700421.926 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:47:02.322Z,1520700422.322 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:47:02.720Z,1520700422.720 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:47:03.129Z,1520700423.129 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:47:03.529Z,1520700423.529 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:47:03.923Z,1520700423.923 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:47:04.319Z,1520700424.319 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:47:04.719Z,1520700424.719 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:47:05.120Z,1520700425.120 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:47:05.560Z,1520700425.560 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:47:05.932Z,1520700425.932 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:47:06.332Z,1520700426.332 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:47:06.738Z,1520700426.738 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:47:09.946Z,1520700429.946 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:47:10.074Z,1520700430.074 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:47:10.469Z,1520700430.469 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:47:10.860Z,1520700430.860 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:47:11.264Z,1520700431.264 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:47:11.669Z,1520700431.669 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:47:12.068Z,1520700432.068 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:47:12.467Z,1520700432.467 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:47:12.869Z,1520700432.869 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:47:13.264Z,1520700433.264 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:47:13.662Z,1520700433.662 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:47:14.076Z,1520700434.076 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:47:14.469Z,1520700434.469 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:47:14.868Z,1520700434.868 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:47:15.262Z,1520700435.262 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:47:15.656Z,1520700435.656 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:47:16.072Z,1520700436.072 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:47:16.463Z,1520700436.463 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:47:16.856Z,1520700436.856 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:47:17.268Z,1520700437.268 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:47:17.673Z,1520700437.673 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:47:18.056Z,1520700438.056 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:47:18.474Z,1520700438.474 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:47:18.860Z,1520700438.860 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:47:19.282Z,1520700439.282 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:47:19.656Z,1520700439.656 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:47:20.061Z,1520700440.061 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:47:20.482Z,1520700440.482 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:47:20.861Z,1520700440.861 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:47:21.261Z,1520700441.261 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:47:21.661Z,1520700441.661 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:47:22.060Z,1520700442.060 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:47:22.469Z,1520700442.469 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:47:22.865Z,1520700442.865 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:47:23.268Z,1520700443.268 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:47:23.667Z,1520700443.667 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:47:24.069Z,1520700444.069 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:47:24.471Z,1520700444.471 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:47:24.868Z,1520700444.868 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:47:25.268Z,1520700445.268 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:47:25.665Z,1520700445.665 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:47:26.069Z,1520700446.069 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:47:26.469Z,1520700446.469 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:47:26.869Z,1520700446.869 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:47:27.280Z,1520700447.280 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:47:27.669Z,1520700447.669 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:47:28.054Z,1520700448.054 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:47:28.472Z,1520700448.472 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:47:28.859Z,1520700448.859 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:47:29.256Z,1520700449.256 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:47:29.660Z,1520700449.660 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:47:30.064Z,1520700450.064 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:47:30.464Z,1520700450.464 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:47:30.861Z,1520700450.861 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:47:31.268Z,1520700451.268 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:47:31.667Z,1520700451.667 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:47:32.066Z,1520700452.066 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:47:32.463Z,1520700452.463 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:47:32.870Z,1520700452.870 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:47:33.276Z,1520700453.276 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:47:33.668Z,1520700453.668 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:47:34.068Z,1520700454.068 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:47:34.466Z,1520700454.466 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:47:34.868Z,1520700454.868 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:47:35.264Z,1520700455.264 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:47:35.669Z,1520700455.669 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:47:36.066Z,1520700456.066 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:47:36.468Z,1520700456.468 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:47:36.877Z,1520700456.877 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:47:37.260Z,1520700457.260 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:47:37.673Z,1520700457.673 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:47:38.080Z,1520700458.080 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:47:38.480Z,1520700458.480 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:47:38.860Z,1520700458.860 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:47:39.279Z,1520700459.279 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:47:39.682Z,1520700459.682 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:47:40.057Z,1520700460.057 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:47:40.460Z,1520700460.460 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:47:40.864Z,1520700460.864 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:47:41.263Z,1520700461.263 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:47:41.660Z,1520700461.660 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:47:42.064Z,1520700462.064 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:47:42.465Z,1520700462.465 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:47:42.859Z,1520700462.859 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:47:43.260Z,1520700463.260 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:47:43.660Z,1520700463.660 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:47:44.060Z,1520700464.060 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:47:44.460Z,1520700464.460 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:47:44.860Z,1520700464.860 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:47:45.270Z,1520700465.270 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:47:45.670Z,1520700465.670 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:47:46.080Z,1520700466.080 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:47:46.460Z,1520700466.460 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:47:46.860Z,1520700466.860 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:47:47.260Z,1520700467.260 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:47:47.660Z,1520700467.660 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:47:48.060Z,1520700468.060 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:47:48.460Z,1520700468.460 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:47:48.860Z,1520700468.860 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:47:49.265Z,1520700469.265 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:47:49.668Z,1520700469.668 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:47:50.070Z,1520700470.070 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:47:50.465Z,1520700470.465 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:47:50.869Z,1520700470.869 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:47:51.276Z,1520700471.276 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:47:51.669Z,1520700471.669 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:47:52.069Z,1520700472.069 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:47:52.469Z,1520700472.469 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:47:52.870Z,1520700472.870 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:47:53.265Z,1520700473.265 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:47:53.668Z,1520700473.668 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:47:54.067Z,1520700474.067 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:47:54.473Z,1520700474.473 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:47:54.881Z,1520700474.881 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:47:55.274Z,1520700475.274 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:47:55.661Z,1520700475.661 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:47:56.061Z,1520700476.061 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:47:56.460Z,1520700476.460 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:47:56.864Z,1520700476.864 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:47:57.260Z,1520700477.260 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:47:57.660Z,1520700477.660 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:47:58.066Z,1520700478.066 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:47:58.469Z,1520700478.469 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:47:58.864Z,1520700478.864 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:47:59.267Z,1520700479.267 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:47:59.669Z,1520700479.669 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:48:00.069Z,1520700480.069 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:48:00.472Z,1520700480.472 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:48:00.881Z,1520700480.881 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:48:01.256Z,1520700481.256 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:48:01.672Z,1520700481.672 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:48:02.056Z,1520700482.056 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:48:02.456Z,1520700482.456 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:48:02.856Z,1520700482.856 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:48:03.272Z,1520700483.272 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:48:03.658Z,1520700483.658 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:48:04.069Z,1520700484.069 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:48:04.468Z,1520700484.468 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:48:04.872Z,1520700484.872 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:48:05.269Z,1520700485.269 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:48:05.670Z,1520700485.670 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:48:06.072Z,1520700486.072 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:48:06.469Z,1520700486.469 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:48:06.878Z,1520700486.878 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:48:07.272Z,1520700487.272 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:48:07.668Z,1520700487.668 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:48:08.064Z,1520700488.064 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:48:08.468Z,1520700488.468 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:48:11.730Z,1520700491.730 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:48:11.858Z,1520700491.858 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:48:12.229Z,1520700492.229 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:48:12.629Z,1520700492.629 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:48:13.029Z,1520700493.029 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:48:13.425Z,1520700493.425 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:48:13.828Z,1520700493.828 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:48:14.216Z,1520700494.216 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:48:14.620Z,1520700494.620 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:48:15.020Z,1520700495.020 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:48:15.418Z,1520700495.418 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:48:15.820Z,1520700495.820 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:48:16.216Z,1520700496.216 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:48:16.618Z,1520700496.618 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:48:17.021Z,1520700497.021 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:48:17.424Z,1520700497.424 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:48:17.821Z,1520700497.821 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:48:18.225Z,1520700498.225 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:48:18.625Z,1520700498.625 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:48:19.026Z,1520700499.026 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:48:19.427Z,1520700499.427 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:48:19.828Z,1520700499.828 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:48:20.227Z,1520700500.227 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:48:20.630Z,1520700500.630 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:48:21.028Z,1520700501.028 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:48:21.427Z,1520700501.427 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:48:21.852Z,1520700501.852 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:48:22.220Z,1520700502.220 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:48:22.622Z,1520700502.622 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:48:23.022Z,1520700503.022 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:48:23.422Z,1520700503.422 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:48:23.830Z,1520700503.830 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:48:24.222Z,1520700504.222 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:48:24.621Z,1520700504.621 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:48:25.016Z,1520700505.016 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:48:25.432Z,1520700505.432 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:48:25.820Z,1520700505.820 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:48:26.224Z,1520700506.224 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:48:26.626Z,1520700506.626 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:48:27.021Z,1520700507.021 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:48:27.428Z,1520700507.428 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:48:27.825Z,1520700507.825 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:48:28.227Z,1520700508.227 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:48:28.624Z,1520700508.624 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:48:29.027Z,1520700509.027 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:48:29.428Z,1520700509.428 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:48:29.824Z,1520700509.824 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:48:30.226Z,1520700510.226 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:48:30.636Z,1520700510.636 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:48:31.027Z,1520700511.027 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:48:31.428Z,1520700511.428 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:48:31.832Z,1520700511.832 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:48:32.225Z,1520700512.225 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:48:32.628Z,1520700512.628 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:48:33.022Z,1520700513.022 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:48:33.425Z,1520700513.425 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:48:33.827Z,1520700513.827 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:48:34.233Z,1520700514.233 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:48:34.627Z,1520700514.627 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:48:35.028Z,1520700515.028 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:48:35.424Z,1520700515.424 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:48:35.824Z,1520700515.824 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:48:36.215Z,1520700516.215 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:48:36.621Z,1520700516.621 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:48:37.020Z,1520700517.020 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:48:37.420Z,1520700517.420 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:48:37.820Z,1520700517.820 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:48:38.225Z,1520700518.225 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:48:38.625Z,1520700518.625 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:48:39.025Z,1520700519.025 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:48:39.425Z,1520700519.425 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:48:39.829Z,1520700519.829 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:48:40.229Z,1520700520.229 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:48:40.625Z,1520700520.625 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:48:41.030Z,1520700521.030 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:48:41.426Z,1520700521.426 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:48:41.832Z,1520700521.832 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:48:42.228Z,1520700522.228 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:48:42.626Z,1520700522.626 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:48:43.028Z,1520700523.028 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:48:43.419Z,1520700523.419 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:48:43.820Z,1520700523.820 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:48:44.215Z,1520700524.215 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:48:44.620Z,1520700524.620 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:48:45.023Z,1520700525.023 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:48:45.420Z,1520700525.420 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:48:45.820Z,1520700525.820 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:48:46.228Z,1520700526.228 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:48:46.624Z,1520700526.624 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:48:47.028Z,1520700527.028 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:48:47.428Z,1520700527.428 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:48:47.826Z,1520700527.826 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:48:48.229Z,1520700528.229 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:48:48.631Z,1520700528.631 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:48:49.029Z,1520700529.029 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:48:49.429Z,1520700529.429 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:48:49.828Z,1520700529.828 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:48:50.231Z,1520700530.231 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:48:50.629Z,1520700530.629 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:48:51.013Z,1520700531.013 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:48:51.416Z,1520700531.416 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:48:51.820Z,1520700531.820 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:48:52.224Z,1520700532.224 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:48:52.625Z,1520700532.625 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:48:53.028Z,1520700533.028 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:48:53.421Z,1520700533.421 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:48:53.824Z,1520700533.824 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:48:54.227Z,1520700534.227 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:48:54.629Z,1520700534.629 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:48:55.029Z,1520700535.029 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:48:55.436Z,1520700535.436 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:48:55.833Z,1520700535.833 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:48:56.224Z,1520700536.224 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:48:56.620Z,1520700536.620 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:48:57.020Z,1520700537.020 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:48:57.425Z,1520700537.425 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:48:57.824Z,1520700537.824 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:48:58.232Z,1520700538.232 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:48:58.628Z,1520700538.628 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:48:59.028Z,1520700539.028 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:48:59.429Z,1520700539.429 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:48:59.828Z,1520700539.828 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:49:00.232Z,1520700540.232 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:49:00.616Z,1520700540.616 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:49:01.019Z,1520700541.019 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:49:01.424Z,1520700541.424 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:49:01.820Z,1520700541.820 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:49:02.217Z,1520700542.217 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:49:02.616Z,1520700542.616 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:49:03.020Z,1520700543.020 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:49:03.420Z,1520700543.420 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:49:03.832Z,1520700543.832 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:49:04.229Z,1520700544.229 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:49:04.627Z,1520700544.627 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:49:05.027Z,1520700545.027 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:49:05.427Z,1520700545.427 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:49:05.825Z,1520700545.825 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:49:06.225Z,1520700546.225 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:49:06.273Z,1520700546.273 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-03-10T16:49:06.273Z,1520700546.273 [Default:CheckIn:C.Wait] Stopped
2018-03-10T16:49:06.273Z,1520700546.273 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-03-10T16:49:06.273Z,1520700546.273 [Default:CheckIn:D] Running Loop=1
2018-03-10T16:49:06.625Z,1520700546.625 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:49:06.644Z,1520700546.644 [Default:CheckIn:D] Stopped
2018-03-10T16:49:06.644Z,1520700546.644 [Default:CheckIn:E] Running Loop=1
2018-03-10T16:49:07.028Z,1520700547.028 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:49:07.054Z,1520700547.054 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 689.812044 min 
2018-03-10T16:49:07.054Z,1520700547.054 [Default:CheckIn:E] Stopped
2018-03-10T16:49:07.055Z,1520700547.055 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-03-10T16:49:07.055Z,1520700547.055 [Default:CheckIn] Stopped
2018-03-10T16:49:07.055Z,1520700547.055 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-03-10T16:49:07.055Z,1520700547.055 [Default:CheckIn](INFO): Running loop #68
2018-03-10T16:49:07.055Z,1520700547.055 [Default:CheckIn] Running Loop=68
2018-03-10T16:49:07.055Z,1520700547.055 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-03-10T16:49:07.056Z,1520700547.056 [Default:CheckIn:Read_GPS] Running Loop=1
2018-03-10T16:49:10.257Z,1520700550.257 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:49:10.371Z,1520700550.371 [NAL9602](INFO): Powering up
2018-03-10T16:49:10.388Z,1520700550.388 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:49:10.776Z,1520700550.776 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:49:11.175Z,1520700551.175 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:49:11.577Z,1520700551.577 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:49:11.973Z,1520700551.973 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:49:12.368Z,1520700552.368 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:49:12.768Z,1520700552.768 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:49:13.173Z,1520700553.173 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:49:13.577Z,1520700553.577 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:49:13.976Z,1520700553.976 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:49:14.376Z,1520700554.376 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:49:14.776Z,1520700554.776 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:49:15.180Z,1520700555.180 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:49:15.581Z,1520700555.581 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:49:15.980Z,1520700555.980 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:49:16.376Z,1520700556.376 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:49:16.786Z,1520700556.786 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:49:17.181Z,1520700557.181 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:49:17.577Z,1520700557.577 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:49:17.980Z,1520700557.980 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:49:18.384Z,1520700558.384 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:49:18.777Z,1520700558.777 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:49:19.176Z,1520700559.176 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:49:19.580Z,1520700559.580 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:49:19.980Z,1520700559.980 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:49:20.377Z,1520700560.377 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:49:20.780Z,1520700560.780 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:49:21.191Z,1520700561.191 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:49:21.556Z,1520700561.556 [NAL9602](INFO): NAL9602 initialized
2018-03-10T16:49:21.585Z,1520700561.585 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:49:21.980Z,1520700561.980 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:49:22.356Z,1520700562.356 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-03-10T16:49:22.356Z,1520700562.356 [NAL9602] Data Fault, FailCount= 2
2018-03-10T16:49:22.356Z,1520700562.356 [NAL9602](ERROR): Data Fault
2018-03-10T16:49:22.397Z,1520700562.397 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:49:22.440Z,1520700562.440 [CBIT](ERROR): Data Fault in component: NAL9602
2018-03-10T16:49:22.756Z,1520700562.756 [NAL9602](INFO): Powering down
2018-03-10T16:49:22.773Z,1520700562.773 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:49:23.172Z,1520700563.172 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:49:23.572Z,1520700563.572 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:49:23.625Z,1520700563.625 [CBIT](INFO): Clearing failed state for component NAL9602
2018-03-10T16:49:23.625Z,1520700563.625 [NAL9602] No Fault, FailCount= 2
2018-03-10T16:49:23.972Z,1520700563.972 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:49:24.372Z,1520700564.372 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:49:24.768Z,1520700564.768 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:49:25.177Z,1520700565.177 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:49:25.572Z,1520700565.572 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:49:25.972Z,1520700565.972 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:49:26.376Z,1520700566.376 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:49:26.772Z,1520700566.772 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:49:27.177Z,1520700567.177 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:49:27.572Z,1520700567.572 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:49:27.972Z,1520700567.972 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:49:28.020Z,1520700568.020 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T16:49:28.020Z,1520700568.020 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 153
2018-03-10T16:49:28.020Z,1520700568.020 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-10T16:49:28.032Z,1520700568.032 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-10T16:49:28.384Z,1520700568.384 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:49:28.456Z,1520700568.456 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-10T16:49:28.456Z,1520700568.456 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 153
2018-03-10T16:49:28.772Z,1520700568.772 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:49:28.816Z,1520700568.816 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-10T16:49:28.816Z,1520700568.816 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-10T16:49:28.816Z,1520700568.816 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-10T16:49:29.177Z,1520700569.177 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:49:29.573Z,1520700569.573 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:49:29.984Z,1520700569.984 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:49:30.381Z,1520700570.381 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:49:30.774Z,1520700570.774 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:49:31.176Z,1520700571.176 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:49:31.574Z,1520700571.574 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:49:31.981Z,1520700571.981 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:49:32.376Z,1520700572.376 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:49:32.784Z,1520700572.784 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:49:33.176Z,1520700573.176 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:49:33.578Z,1520700573.578 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:49:33.984Z,1520700573.984 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:49:34.384Z,1520700574.384 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:49:34.790Z,1520700574.790 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:49:35.168Z,1520700575.168 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:49:35.568Z,1520700575.568 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:49:35.972Z,1520700575.972 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:49:36.372Z,1520700576.372 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:49:36.772Z,1520700576.772 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:49:37.173Z,1520700577.173 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:49:37.574Z,1520700577.574 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:49:37.975Z,1520700577.975 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:49:38.381Z,1520700578.381 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:49:38.773Z,1520700578.773 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:49:39.179Z,1520700579.179 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:49:39.581Z,1520700579.581 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:49:39.983Z,1520700579.983 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:49:40.376Z,1520700580.376 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:49:40.780Z,1520700580.780 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:49:41.176Z,1520700581.176 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:49:41.572Z,1520700581.572 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:49:41.980Z,1520700581.980 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:49:42.380Z,1520700582.380 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:49:42.777Z,1520700582.777 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:49:43.180Z,1520700583.180 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:49:43.580Z,1520700583.580 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:49:43.982Z,1520700583.982 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:49:44.424Z,1520700584.424 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:49:44.781Z,1520700584.781 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:49:45.182Z,1520700585.182 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:49:45.582Z,1520700585.582 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:49:45.981Z,1520700585.981 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:49:46.372Z,1520700586.372 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:49:46.792Z,1520700586.792 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:49:47.193Z,1520700587.193 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:49:47.568Z,1520700587.568 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:49:47.988Z,1520700587.988 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:49:48.379Z,1520700588.379 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:49:48.788Z,1520700588.788 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:49:49.182Z,1520700589.182 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:49:49.581Z,1520700589.581 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:49:49.980Z,1520700589.980 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:49:50.379Z,1520700590.379 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:49:50.784Z,1520700590.784 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:49:51.185Z,1520700591.185 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:49:51.575Z,1520700591.575 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:49:51.985Z,1520700591.985 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:49:52.376Z,1520700592.376 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:49:52.780Z,1520700592.780 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:49:53.160Z,1520700593.160 [NAL9602](INFO): Powering up NAL9602
2018-03-10T16:49:53.177Z,1520700593.177 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:49:53.576Z,1520700593.576 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:49:53.973Z,1520700593.973 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:49:54.368Z,1520700594.368 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:49:54.772Z,1520700594.772 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:49:55.172Z,1520700595.172 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:49:55.568Z,1520700595.568 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:49:55.968Z,1520700595.968 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:49:56.376Z,1520700596.376 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:49:56.772Z,1520700596.772 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:49:57.168Z,1520700597.168 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:49:57.592Z,1520700597.592 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:49:57.976Z,1520700597.976 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:49:58.376Z,1520700598.376 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:49:58.773Z,1520700598.773 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:49:59.192Z,1520700599.192 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:49:59.576Z,1520700599.576 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:49:59.972Z,1520700599.972 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:50:00.376Z,1520700600.376 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:50:00.768Z,1520700600.768 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:50:01.180Z,1520700601.180 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:50:01.572Z,1520700601.572 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:50:01.980Z,1520700601.980 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:50:02.384Z,1520700602.384 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:50:02.780Z,1520700602.780 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:50:03.177Z,1520700603.177 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:50:03.591Z,1520700603.591 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:50:03.961Z,1520700603.961 [NAL9602](INFO): NAL9602 initialized
2018-03-10T16:50:03.978Z,1520700603.978 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:50:04.377Z,1520700604.377 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:50:04.796Z,1520700604.796 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:50:05.187Z,1520700605.187 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:50:05.587Z,1520700605.587 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:50:05.986Z,1520700605.986 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:50:06.396Z,1520700606.396 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:50:06.798Z,1520700606.798 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:50:07.192Z,1520700607.192 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:50:10.501Z,1520700610.501 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:50:10.619Z,1520700610.619 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:50:11.008Z,1520700611.008 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:50:11.408Z,1520700611.408 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:50:11.806Z,1520700611.806 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:50:12.200Z,1520700612.200 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:50:12.607Z,1520700612.607 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:50:12.985Z,1520700612.985 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:50:13.387Z,1520700613.387 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:50:13.791Z,1520700613.791 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:50:14.189Z,1520700614.189 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:50:14.589Z,1520700614.589 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:50:14.991Z,1520700614.991 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:50:15.388Z,1520700615.388 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:50:15.790Z,1520700615.790 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:50:16.195Z,1520700616.195 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:50:16.604Z,1520700616.604 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:50:16.993Z,1520700616.993 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:50:17.395Z,1520700617.395 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:50:17.792Z,1520700617.792 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:50:18.186Z,1520700618.186 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:50:18.596Z,1520700618.596 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:50:18.995Z,1520700618.995 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:50:19.397Z,1520700619.397 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:50:19.787Z,1520700619.787 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:50:20.191Z,1520700620.191 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:50:20.600Z,1520700620.600 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:50:21.004Z,1520700621.004 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:50:21.398Z,1520700621.398 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:50:21.788Z,1520700621.788 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:50:22.186Z,1520700622.186 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:50:22.581Z,1520700622.581 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:50:22.982Z,1520700622.982 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:50:23.395Z,1520700623.395 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:50:23.791Z,1520700623.791 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:50:24.204Z,1520700624.204 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:50:24.606Z,1520700624.606 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:50:24.993Z,1520700624.993 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:50:25.404Z,1520700625.404 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:50:25.789Z,1520700625.789 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:50:26.177Z,1520700626.177 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:50:26.603Z,1520700626.603 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:50:26.983Z,1520700626.983 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:50:27.385Z,1520700627.385 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:50:27.782Z,1520700627.782 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:50:28.198Z,1520700628.198 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:50:28.596Z,1520700628.596 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:50:28.992Z,1520700628.992 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:50:29.411Z,1520700629.411 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:50:29.792Z,1520700629.792 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:50:30.199Z,1520700630.199 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:50:30.599Z,1520700630.599 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:50:30.991Z,1520700630.991 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:50:31.391Z,1520700631.391 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:50:31.786Z,1520700631.786 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:50:32.187Z,1520700632.187 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:50:32.588Z,1520700632.588 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:50:32.992Z,1520700632.992 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:50:33.390Z,1520700633.390 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:50:33.796Z,1520700633.796 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:50:34.201Z,1520700634.201 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:50:34.595Z,1520700634.595 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:50:34.000Z,1520700635.000 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:50:35.408Z,1520700635.408 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:50:35.798Z,1520700635.798 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:50:36.182Z,1520700636.182 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:50:36.583Z,1520700636.583 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:50:36.985Z,1520700636.985 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:50:37.391Z,1520700637.391 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:50:37.784Z,1520700637.784 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:50:38.187Z,1520700638.187 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:50:38.589Z,1520700638.589 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:50:38.992Z,1520700638.992 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:50:39.394Z,1520700639.394 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:50:39.807Z,1520700639.807 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:50:40.192Z,1520700640.192 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:50:40.594Z,1520700640.594 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:50:40.998Z,1520700640.998 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:50:41.391Z,1520700641.391 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:50:41.788Z,1520700641.788 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:50:42.188Z,1520700642.188 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:50:42.579Z,1520700642.579 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:50:42.983Z,1520700642.983 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:50:43.397Z,1520700643.397 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:50:43.776Z,1520700643.776 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:50:44.191Z,1520700644.191 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:50:44.593Z,1520700644.593 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:50:45.004Z,1520700645.004 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:50:45.406Z,1520700645.406 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:50:45.814Z,1520700645.814 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:50:46.204Z,1520700646.204 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:50:46.588Z,1520700646.588 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:50:46.981Z,1520700646.981 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:50:47.387Z,1520700647.387 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:50:47.789Z,1520700647.789 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:50:48.196Z,1520700648.196 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:50:48.587Z,1520700648.587 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:50:48.988Z,1520700648.988 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:50:49.386Z,1520700649.386 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:50:49.792Z,1520700649.792 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:50:50.197Z,1520700650.197 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:50:50.603Z,1520700650.603 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:50:50.000Z,1520700651.000 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:50:51.398Z,1520700651.398 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:50:51.788Z,1520700651.788 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:50:52.183Z,1520700652.183 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:50:52.592Z,1520700652.592 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:50:52.996Z,1520700652.996 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:50:53.381Z,1520700653.381 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:50:53.782Z,1520700653.782 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:50:54.191Z,1520700654.191 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:50:54.580Z,1520700654.580 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:50:54.978Z,1520700654.978 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:50:55.394Z,1520700655.394 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:50:55.808Z,1520700655.808 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:50:56.203Z,1520700656.203 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:50:56.602Z,1520700656.602 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:50:56.979Z,1520700656.979 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:50:57.386Z,1520700657.386 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:50:57.798Z,1520700657.798 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:50:58.176Z,1520700658.176 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:50:58.583Z,1520700658.583 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:50:59.000Z,1520700659.000 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:50:59.381Z,1520700659.381 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:50:59.786Z,1520700659.786 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:51:00.202Z,1520700660.202 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:51:00.601Z,1520700660.601 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:51:01.007Z,1520700661.007 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:51:01.410Z,1520700661.410 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:51:01.793Z,1520700661.793 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:51:02.183Z,1520700662.183 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:51:02.589Z,1520700662.589 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:51:02.981Z,1520700662.981 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:51:03.383Z,1520700663.383 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:51:03.786Z,1520700663.786 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:51:04.189Z,1520700664.189 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:51:04.581Z,1520700664.581 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:51:05.002Z,1520700665.002 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:51:05.386Z,1520700665.386 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:51:05.803Z,1520700665.803 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:51:06.201Z,1520700666.201 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:51:06.602Z,1520700666.602 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:51:07.003Z,1520700667.003 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:51:07.393Z,1520700667.393 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:51:10.519Z,1520700670.519 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:51:10.641Z,1520700670.641 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:51:11.043Z,1520700671.043 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:51:11.428Z,1520700671.428 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:51:11.836Z,1520700671.836 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:51:12.240Z,1520700672.240 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:51:12.625Z,1520700672.625 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:51:13.022Z,1520700673.022 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:51:13.429Z,1520700673.429 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:51:13.813Z,1520700673.813 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:51:14.221Z,1520700674.221 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:51:14.616Z,1520700674.616 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:51:15.020Z,1520700675.020 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:51:15.417Z,1520700675.417 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:51:15.824Z,1520700675.824 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:51:16.235Z,1520700676.235 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:51:16.632Z,1520700676.632 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:51:17.050Z,1520700677.050 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:51:17.435Z,1520700677.435 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:51:17.833Z,1520700677.833 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:51:18.222Z,1520700678.222 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:51:18.627Z,1520700678.627 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:51:19.027Z,1520700679.027 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:51:19.417Z,1520700679.417 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:51:19.813Z,1520700679.813 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:51:20.218Z,1520700680.218 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:51:20.621Z,1520700680.621 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:51:21.032Z,1520700681.032 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:51:21.432Z,1520700681.432 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:51:21.817Z,1520700681.817 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:51:22.222Z,1520700682.222 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:51:22.617Z,1520700682.617 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:51:23.022Z,1520700683.022 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:51:23.424Z,1520700683.424 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:51:23.826Z,1520700683.826 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:51:24.224Z,1520700684.224 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:51:24.643Z,1520700684.643 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:51:25.040Z,1520700685.040 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:51:25.429Z,1520700685.429 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:51:25.831Z,1520700685.831 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:51:26.221Z,1520700686.221 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:51:26.616Z,1520700686.616 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:51:27.024Z,1520700687.024 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:51:27.417Z,1520700687.417 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:51:27.817Z,1520700687.817 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:51:28.217Z,1520700688.217 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:51:28.621Z,1520700688.621 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:51:29.017Z,1520700689.017 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:51:29.420Z,1520700689.420 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:51:29.825Z,1520700689.825 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:51:30.228Z,1520700690.228 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:51:30.626Z,1520700690.626 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:51:31.022Z,1520700691.022 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:51:31.424Z,1520700691.424 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:51:31.825Z,1520700691.825 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:51:32.221Z,1520700692.221 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:51:32.630Z,1520700692.630 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:51:33.031Z,1520700693.031 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:51:33.431Z,1520700693.431 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:51:33.824Z,1520700693.824 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:51:34.225Z,1520700694.225 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:51:34.614Z,1520700694.614 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:51:35.036Z,1520700695.036 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:51:35.429Z,1520700695.429 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:51:35.814Z,1520700695.814 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:51:36.219Z,1520700696.219 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:51:36.623Z,1520700696.623 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:51:37.016Z,1520700697.016 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:51:37.437Z,1520700697.437 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:51:37.817Z,1520700697.817 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:51:38.217Z,1520700698.217 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:51:38.625Z,1520700698.625 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:51:39.025Z,1520700699.025 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:51:39.426Z,1520700699.426 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:51:39.824Z,1520700699.824 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:51:40.224Z,1520700700.224 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:51:40.624Z,1520700700.624 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:51:41.026Z,1520700701.026 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:51:41.425Z,1520700701.425 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:51:41.830Z,1520700701.830 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:51:42.234Z,1520700702.234 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:51:42.624Z,1520700702.624 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:51:43.028Z,1520700703.028 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:51:43.416Z,1520700703.416 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:51:43.816Z,1520700703.816 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:51:44.217Z,1520700704.217 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:51:44.624Z,1520700704.624 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:51:45.016Z,1520700705.016 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:51:45.417Z,1520700705.417 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:51:45.818Z,1520700705.818 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:51:46.240Z,1520700706.240 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:51:46.637Z,1520700706.637 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:51:47.018Z,1520700707.018 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:51:47.419Z,1520700707.419 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:51:47.817Z,1520700707.817 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:51:48.224Z,1520700708.224 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:51:48.617Z,1520700708.617 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:51:49.019Z,1520700709.019 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:51:49.418Z,1520700709.418 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:51:49.831Z,1520700709.831 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:51:50.229Z,1520700710.229 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:51:50.630Z,1520700710.630 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:51:51.025Z,1520700711.025 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:51:51.426Z,1520700711.426 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:51:51.822Z,1520700711.822 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:51:52.222Z,1520700712.222 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:51:52.626Z,1520700712.626 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:51:53.022Z,1520700713.022 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:51:53.423Z,1520700713.423 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:51:53.824Z,1520700713.824 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:51:54.231Z,1520700714.231 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:51:54.639Z,1520700714.639 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:51:55.028Z,1520700715.028 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:51:55.416Z,1520700715.416 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:51:55.821Z,1520700715.821 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:51:56.224Z,1520700716.224 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:51:56.624Z,1520700716.624 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:51:57.027Z,1520700717.027 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:51:57.424Z,1520700717.424 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:51:57.820Z,1520700717.820 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:51:58.231Z,1520700718.231 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:51:58.628Z,1520700718.628 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:51:59.029Z,1520700719.029 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:51:59.430Z,1520700719.430 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:51:59.820Z,1520700719.820 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:52:00.220Z,1520700720.220 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:52:00.631Z,1520700720.631 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:52:01.014Z,1520700721.014 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:52:01.428Z,1520700721.428 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:52:01.833Z,1520700721.833 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:52:02.229Z,1520700722.229 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:52:02.628Z,1520700722.628 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:52:03.017Z,1520700723.017 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:52:03.431Z,1520700723.431 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:52:03.846Z,1520700723.846 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:52:04.222Z,1520700724.222 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:52:04.624Z,1520700724.624 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:52:05.022Z,1520700725.022 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:52:05.422Z,1520700725.422 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:52:05.822Z,1520700725.822 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:52:06.229Z,1520700726.229 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:52:06.613Z,1520700726.613 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:52:07.017Z,1520700727.017 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:52:07.416Z,1520700727.416 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:52:10.764Z,1520700730.764 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:52:10.920Z,1520700730.920 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:52:11.302Z,1520700731.302 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:52:11.705Z,1520700731.705 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:52:12.107Z,1520700732.107 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:52:12.510Z,1520700732.510 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:52:12.901Z,1520700732.901 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:52:13.293Z,1520700733.293 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:52:13.697Z,1520700733.697 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:52:14.088Z,1520700734.088 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:52:14.497Z,1520700734.497 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:52:14.900Z,1520700734.900 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:52:15.306Z,1520700735.306 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:52:15.701Z,1520700735.701 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:52:16.113Z,1520700736.113 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:52:16.514Z,1520700736.514 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:52:16.889Z,1520700736.889 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:52:17.293Z,1520700737.293 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:52:17.693Z,1520700737.693 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:52:18.097Z,1520700738.097 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:52:18.493Z,1520700738.493 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:52:18.897Z,1520700738.897 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:52:19.288Z,1520700739.288 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:52:19.693Z,1520700739.693 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:52:20.099Z,1520700740.099 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:52:20.517Z,1520700740.517 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:52:20.921Z,1520700740.921 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:52:21.298Z,1520700741.298 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:52:21.698Z,1520700741.698 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:52:22.103Z,1520700742.103 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:52:22.506Z,1520700742.506 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:52:22.906Z,1520700742.906 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:52:23.312Z,1520700743.312 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:52:23.703Z,1520700743.703 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:52:24.089Z,1520700744.089 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:52:24.493Z,1520700744.493 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:52:24.889Z,1520700744.889 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:52:25.289Z,1520700745.289 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:52:25.693Z,1520700745.693 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:52:26.093Z,1520700746.093 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:52:26.490Z,1520700746.490 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:52:26.893Z,1520700746.893 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:52:27.293Z,1520700747.293 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:52:27.707Z,1520700747.707 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:52:28.109Z,1520700748.109 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:52:28.502Z,1520700748.502 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:52:28.897Z,1520700748.897 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:52:28.928Z,1520700748.928 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T16:52:28.928Z,1520700748.928 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 154
2018-03-10T16:52:28.928Z,1520700748.928 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-10T16:52:28.958Z,1520700748.958 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-10T16:52:29.292Z,1520700749.292 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:52:29.328Z,1520700749.328 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-10T16:52:29.328Z,1520700749.328 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 154
2018-03-10T16:52:29.693Z,1520700749.693 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:52:29.710Z,1520700749.710 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-10T16:52:29.711Z,1520700749.711 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-10T16:52:29.711Z,1520700749.711 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-10T16:52:30.093Z,1520700750.093 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:52:30.502Z,1520700750.502 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:52:30.905Z,1520700750.905 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:52:31.311Z,1520700751.311 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:52:31.715Z,1520700751.715 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:52:32.101Z,1520700752.101 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:52:32.496Z,1520700752.496 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:52:32.910Z,1520700752.910 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:52:33.301Z,1520700753.301 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:52:33.701Z,1520700753.701 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:52:34.101Z,1520700754.101 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:52:34.502Z,1520700754.502 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:52:34.896Z,1520700754.896 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:52:35.308Z,1520700755.308 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:52:35.719Z,1520700755.719 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:52:36.108Z,1520700756.108 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:52:36.493Z,1520700756.493 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:52:36.893Z,1520700756.893 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:52:37.289Z,1520700757.289 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:52:37.709Z,1520700757.709 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:52:38.089Z,1520700758.089 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:52:38.489Z,1520700758.489 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:52:38.892Z,1520700758.892 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:52:39.293Z,1520700759.293 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:52:39.689Z,1520700759.689 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:52:40.092Z,1520700760.092 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:52:40.489Z,1520700760.489 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:52:40.893Z,1520700760.893 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:52:41.293Z,1520700761.293 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:52:41.692Z,1520700761.692 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:52:42.089Z,1520700762.089 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:52:42.493Z,1520700762.493 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:52:42.893Z,1520700762.893 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:52:43.293Z,1520700763.293 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:52:43.693Z,1520700763.693 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:52:44.093Z,1520700764.093 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:52:44.517Z,1520700764.517 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:52:44.903Z,1520700764.903 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:52:45.293Z,1520700765.293 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:52:45.693Z,1520700765.693 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:52:46.093Z,1520700766.093 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:52:46.497Z,1520700766.497 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:52:46.901Z,1520700766.901 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:52:47.305Z,1520700767.305 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:52:47.709Z,1520700767.709 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:52:48.096Z,1520700768.096 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:52:48.508Z,1520700768.508 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:52:48.907Z,1520700768.907 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:52:49.306Z,1520700769.306 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:52:49.713Z,1520700769.713 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:52:50.100Z,1520700770.100 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:52:50.490Z,1520700770.490 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:52:50.896Z,1520700770.896 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:52:51.297Z,1520700771.297 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:52:51.686Z,1520700771.686 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:52:52.092Z,1520700772.092 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:52:52.493Z,1520700772.493 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:52:52.897Z,1520700772.897 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:52:53.292Z,1520700773.292 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:52:53.693Z,1520700773.693 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:52:54.093Z,1520700774.093 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:52:54.505Z,1520700774.505 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:52:54.897Z,1520700774.897 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:52:55.305Z,1520700775.305 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:52:55.698Z,1520700775.698 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:52:56.105Z,1520700776.105 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:52:56.493Z,1520700776.493 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:52:56.900Z,1520700776.900 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:52:57.308Z,1520700777.308 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:52:57.711Z,1520700777.711 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:52:58.100Z,1520700778.100 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:52:58.501Z,1520700778.501 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:52:58.904Z,1520700778.904 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:52:59.296Z,1520700779.296 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:52:59.707Z,1520700779.707 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:53:00.093Z,1520700780.093 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:53:00.492Z,1520700780.492 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:53:00.893Z,1520700780.893 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:53:01.290Z,1520700781.290 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:53:01.726Z,1520700781.726 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:53:02.100Z,1520700782.100 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:53:02.498Z,1520700782.498 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:53:02.892Z,1520700782.892 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:53:03.292Z,1520700783.292 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:53:03.701Z,1520700783.701 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:53:04.098Z,1520700784.098 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:53:04.498Z,1520700784.498 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:53:04.902Z,1520700784.902 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:53:05.302Z,1520700785.302 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:53:05.698Z,1520700785.698 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:53:06.101Z,1520700786.101 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:53:06.510Z,1520700786.510 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:53:06.910Z,1520700786.910 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:53:07.313Z,1520700787.313 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:53:07.693Z,1520700787.693 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:53:10.905Z,1520700790.905 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:53:11.062Z,1520700791.062 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:53:11.442Z,1520700791.442 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:53:11.838Z,1520700791.838 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:53:12.243Z,1520700792.243 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:53:12.637Z,1520700792.637 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:53:13.052Z,1520700793.052 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:53:13.433Z,1520700793.433 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:53:13.847Z,1520700793.847 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:53:14.234Z,1520700794.234 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:53:14.629Z,1520700794.629 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:53:15.042Z,1520700795.042 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:53:15.439Z,1520700795.439 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:53:15.842Z,1520700795.842 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:53:16.242Z,1520700796.242 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:53:16.642Z,1520700796.642 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:53:17.035Z,1520700797.035 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:53:17.441Z,1520700797.441 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:53:17.838Z,1520700797.838 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:53:18.245Z,1520700798.245 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:53:18.637Z,1520700798.637 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:53:19.055Z,1520700799.055 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:53:19.448Z,1520700799.448 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:53:19.855Z,1520700799.855 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:53:20.253Z,1520700800.253 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:53:20.634Z,1520700800.634 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:53:21.033Z,1520700801.033 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:53:21.441Z,1520700801.441 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:53:21.837Z,1520700801.837 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:53:22.236Z,1520700802.236 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:53:22.643Z,1520700802.643 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:53:23.029Z,1520700803.029 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:53:23.445Z,1520700803.445 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:53:23.833Z,1520700803.833 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:53:24.233Z,1520700804.233 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:53:24.633Z,1520700804.633 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:53:25.029Z,1520700805.029 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:53:25.434Z,1520700805.434 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:53:25.833Z,1520700805.833 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:53:26.229Z,1520700806.229 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:53:26.632Z,1520700806.632 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:53:27.032Z,1520700807.032 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:53:27.433Z,1520700807.433 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:53:27.858Z,1520700807.858 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:53:28.251Z,1520700808.251 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:53:28.645Z,1520700808.645 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:53:29.041Z,1520700809.041 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:53:29.445Z,1520700809.445 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:53:29.831Z,1520700809.831 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:53:30.245Z,1520700810.245 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:53:30.641Z,1520700810.641 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:53:31.049Z,1520700811.049 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:53:31.429Z,1520700811.429 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:53:31.833Z,1520700811.833 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:53:32.229Z,1520700812.229 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:53:32.637Z,1520700812.637 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:53:33.032Z,1520700813.032 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:53:33.432Z,1520700813.432 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:53:33.833Z,1520700813.833 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:53:34.233Z,1520700814.233 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:53:34.638Z,1520700814.638 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:53:35.037Z,1520700815.037 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:53:35.433Z,1520700815.433 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:53:35.837Z,1520700815.837 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:53:36.253Z,1520700816.253 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:53:36.643Z,1520700816.643 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:53:37.032Z,1520700817.032 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:53:37.433Z,1520700817.433 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:53:37.833Z,1520700817.833 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:53:38.232Z,1520700818.232 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:53:38.637Z,1520700818.637 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:53:39.032Z,1520700819.032 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:53:39.433Z,1520700819.433 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:53:39.838Z,1520700819.838 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:53:40.233Z,1520700820.233 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:53:40.647Z,1520700820.647 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:53:41.056Z,1520700821.056 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:53:41.444Z,1520700821.444 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:53:41.843Z,1520700821.843 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:53:42.238Z,1520700822.238 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:53:42.636Z,1520700822.636 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:53:43.040Z,1520700823.040 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:53:43.444Z,1520700823.444 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:53:43.833Z,1520700823.833 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:53:44.228Z,1520700824.228 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:53:44.634Z,1520700824.634 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:53:45.048Z,1520700825.048 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:53:45.457Z,1520700825.457 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:53:45.837Z,1520700825.837 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:53:46.231Z,1520700826.231 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:53:46.633Z,1520700826.633 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:53:47.033Z,1520700827.033 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:53:47.431Z,1520700827.431 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:53:47.853Z,1520700827.853 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:53:48.235Z,1520700828.235 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:53:48.656Z,1520700828.656 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:53:49.034Z,1520700829.034 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:53:49.443Z,1520700829.443 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:53:49.858Z,1520700829.858 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:53:50.262Z,1520700830.262 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:53:50.659Z,1520700830.659 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:53:51.056Z,1520700831.056 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:53:51.435Z,1520700831.435 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:53:51.872Z,1520700831.872 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:53:52.240Z,1520700832.240 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:53:52.641Z,1520700832.641 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:53:53.033Z,1520700833.033 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:53:53.042Z,1520700833.042 [BPC1](ERROR): Failed to receive battery data
2018-03-10T16:53:53.042Z,1520700833.042 [BPC1] Communications Fault, FailCount= 1
2018-03-10T16:53:53.042Z,1520700833.042 [BPC1](ERROR): Communications Fault
2018-03-10T16:53:53.085Z,1520700833.085 [CBIT](ERROR): Communications Fault in component: BPC1
2018-03-10T16:53:53.437Z,1520700833.437 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:53:53.845Z,1520700833.845 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:53:54.238Z,1520700834.238 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:53:54.300Z,1520700834.300 [CBIT](INFO): Clearing failed state for component BPC1
2018-03-10T16:53:54.300Z,1520700834.300 [BPC1] No Fault, FailCount= 1
2018-03-10T16:53:54.652Z,1520700834.652 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:53:55.050Z,1520700835.050 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:53:55.429Z,1520700835.429 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:53:55.840Z,1520700835.840 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:53:56.233Z,1520700836.233 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:53:56.629Z,1520700836.629 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:53:57.036Z,1520700837.036 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:53:57.438Z,1520700837.438 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:53:57.858Z,1520700837.858 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:53:58.251Z,1520700838.251 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:53:58.637Z,1520700838.637 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:53:59.034Z,1520700839.034 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:53:59.438Z,1520700839.438 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:53:59.848Z,1520700839.848 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:54:00.232Z,1520700840.232 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:54:00.636Z,1520700840.636 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:54:01.042Z,1520700841.042 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:54:01.433Z,1520700841.433 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:54:01.853Z,1520700841.853 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:54:02.233Z,1520700842.233 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:54:02.633Z,1520700842.633 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:54:03.038Z,1520700843.038 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:54:03.437Z,1520700843.437 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:54:03.835Z,1520700843.835 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:54:04.232Z,1520700844.232 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:54:04.636Z,1520700844.636 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:54:05.029Z,1520700845.029 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:54:05.436Z,1520700845.436 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:54:05.834Z,1520700845.834 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:54:06.229Z,1520700846.229 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:54:06.651Z,1520700846.651 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:54:07.056Z,1520700847.056 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:54:07.077Z,1520700847.077 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-03-10T16:49:07.1Z
2018-03-10T16:54:07.077Z,1520700847.077 [Default:CheckIn:Read_GPS] Stopped
2018-03-10T16:54:07.077Z,1520700847.077 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-03-10T16:54:07.429Z,1520700847.429 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:54:08.020Z,1520700848.020 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:54:11.071Z,1520700851.071 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:54:11.199Z,1520700851.199 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:54:11.566Z,1520700851.566 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20180310T051512/Courier0272.lzma
2018-03-10T16:54:11.587Z,1520700851.587 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:54:11.982Z,1520700851.982 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:54:12.359Z,1520700852.359 [DataOverHttps](INFO): Moved sent file to Logs/20180310T051512/Courier0272.lzma.bak
2018-03-10T16:54:12.359Z,1520700852.359 [DataOverHttps](INFO): SBD MOMSN=8006220
2018-03-10T16:54:12.400Z,1520700852.400 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:54:13.053Z,1520700853.053 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:54:13.184Z,1520700853.184 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:54:13.582Z,1520700853.582 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:54:16.895Z,1520700856.895 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:54:17.015Z,1520700857.015 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:54:17.402Z,1520700857.402 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:54:17.801Z,1520700857.801 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:54:18.202Z,1520700858.202 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:54:18.603Z,1520700858.603 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:54:19.001Z,1520700859.001 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:54:22.476Z,1520700862.476 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:54:24.560Z,1520700864.560 [DataOverHttps](INFO): Sending 246 bytes from file Logs/20180310T051512/Express0273.lzma
2018-03-10T16:54:24.598Z,1520700864.598 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:54:24.747Z,1520700864.747 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:54:24.767Z,1520700864.767 [BPC1](FAULT): Failed to initialize
2018-03-10T16:54:24.767Z,1520700864.767 [BPC1] Communications Fault, FailCount= 2
2018-03-10T16:54:24.767Z,1520700864.767 [BPC1](ERROR): Communications Fault
2018-03-10T16:54:24.828Z,1520700864.828 [CBIT](ERROR): Communications Fault in component: BPC1
2018-03-10T16:54:25.100Z,1520700865.100 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:54:25.470Z,1520700865.470 [DataOverHttps](INFO): Moved sent file to Logs/20180310T051512/Express0273.lzma.bak
2018-03-10T16:54:25.470Z,1520700865.470 [DataOverHttps](INFO): SBD MOMSN=8006222
2018-03-10T16:54:25.513Z,1520700865.513 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:54:26.171Z,1520700866.171 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:54:26.214Z,1520700866.214 [Default:CheckIn:Read_Iridium] Stopped
2018-03-10T16:54:26.214Z,1520700866.214 [Default:CheckIn:C.Wait] Running Loop=1
2018-03-10T16:54:26.214Z,1520700866.214 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-03-10T16:54:26.236Z,1520700866.236 [CBIT](INFO): Clearing failed state for component BPC1
2018-03-10T16:54:26.236Z,1520700866.236 [BPC1] No Fault, FailCount= 2
2018-03-10T16:54:26.296Z,1520700866.296 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:54:26.705Z,1520700866.705 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:54:30.015Z,1520700870.015 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:54:30.142Z,1520700870.142 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:54:30.501Z,1520700870.501 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:54:30.900Z,1520700870.900 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:54:31.302Z,1520700871.302 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:54:31.697Z,1520700871.697 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:54:32.100Z,1520700872.100 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:54:32.523Z,1520700872.523 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:54:32.907Z,1520700872.907 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:54:33.296Z,1520700873.296 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:54:33.697Z,1520700873.697 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:54:34.108Z,1520700874.108 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:54:34.496Z,1520700874.496 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:54:34.897Z,1520700874.897 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:54:35.302Z,1520700875.302 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:54:35.704Z,1520700875.704 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:54:36.096Z,1520700876.096 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:54:36.504Z,1520700876.504 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:54:36.911Z,1520700876.911 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:54:37.311Z,1520700877.311 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:54:37.704Z,1520700877.704 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:54:38.105Z,1520700878.105 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:54:38.495Z,1520700878.495 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:54:38.905Z,1520700878.905 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:54:39.304Z,1520700879.304 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:54:39.695Z,1520700879.695 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:54:40.114Z,1520700880.114 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:54:40.514Z,1520700880.514 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:54:40.903Z,1520700880.903 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:54:41.317Z,1520700881.317 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:54:41.717Z,1520700881.717 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:54:42.108Z,1520700882.108 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:54:42.516Z,1520700882.516 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:54:42.896Z,1520700882.896 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:54:43.306Z,1520700883.306 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:54:43.700Z,1520700883.700 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:54:44.096Z,1520700884.096 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:54:44.493Z,1520700884.493 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:54:44.900Z,1520700884.900 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:54:45.304Z,1520700885.304 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:54:45.697Z,1520700885.697 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:54:46.105Z,1520700886.105 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:54:46.513Z,1520700886.513 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:54:46.902Z,1520700886.902 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:54:47.304Z,1520700887.304 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:54:47.702Z,1520700887.702 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:54:48.100Z,1520700888.100 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:54:48.502Z,1520700888.502 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:54:48.908Z,1520700888.908 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:54:49.296Z,1520700889.296 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:54:49.700Z,1520700889.700 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:54:50.108Z,1520700890.108 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:54:50.501Z,1520700890.501 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:54:50.900Z,1520700890.900 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:54:51.300Z,1520700891.300 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:54:51.693Z,1520700891.693 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:54:52.100Z,1520700892.100 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:54:52.497Z,1520700892.497 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:54:52.897Z,1520700892.897 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:54:53.316Z,1520700893.316 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:54:53.696Z,1520700893.696 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:54:54.097Z,1520700894.097 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:54:54.518Z,1520700894.518 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:54:54.896Z,1520700894.896 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:54:55.281Z,1520700895.281 [NAL9602](INFO): SBD MO Status=2, MOMSN=5836, MT Status=2, MTMSN=0
2018-03-10T16:54:55.281Z,1520700895.281 [NAL9602](ERROR): Failed to initiate SBD session. Error code: 2
2018-03-10T16:54:55.298Z,1520700895.298 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:54:55.721Z,1520700895.721 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:54:56.097Z,1520700896.097 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:54:56.498Z,1520700896.498 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:54:56.506Z,1520700896.506 [BPC1](FAULT): Failed to initialize
2018-03-10T16:54:56.506Z,1520700896.506 [BPC1] Communications Fault, FailCount= 3
2018-03-10T16:54:56.506Z,1520700896.506 [BPC1](ERROR): Communications Fault
2018-03-10T16:54:56.565Z,1520700896.565 [CBIT](ERROR): Communications Fault in component: BPC1
2018-03-10T16:54:56.897Z,1520700896.897 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:54:57.298Z,1520700897.298 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:54:57.697Z,1520700897.697 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:54:57.749Z,1520700897.749 [CBIT](INFO): Clearing failed state for component BPC1
2018-03-10T16:54:57.749Z,1520700897.749 [BPC1] No Fault, FailCount= 3
2018-03-10T16:54:58.117Z,1520700898.117 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:54:58.500Z,1520700898.500 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:54:58.904Z,1520700898.904 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:54:59.318Z,1520700899.318 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:54:59.712Z,1520700899.712 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:55:00.112Z,1520700900.112 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:55:00.528Z,1520700900.528 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:55:00.912Z,1520700900.912 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:55:01.292Z,1520700901.293 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:55:01.717Z,1520700901.717 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:55:02.101Z,1520700902.101 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:55:02.493Z,1520700902.493 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:55:02.895Z,1520700902.895 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:55:03.292Z,1520700903.292 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:55:03.693Z,1520700903.693 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:55:04.096Z,1520700904.096 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:55:04.492Z,1520700904.492 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:55:04.900Z,1520700904.900 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:55:05.296Z,1520700905.296 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:55:05.696Z,1520700905.696 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:55:06.097Z,1520700906.097 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:55:06.492Z,1520700906.492 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session.
2018-03-10T16:55:06.509Z,1520700906.509 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:55:06.896Z,1520700906.896 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:55:07.302Z,1520700907.302 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:55:07.708Z,1520700907.708 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:55:08.105Z,1520700908.105 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:55:08.500Z,1520700908.500 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:55:08.903Z,1520700908.903 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:55:09.297Z,1520700909.297 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:55:09.708Z,1520700909.708 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:55:10.104Z,1520700910.104 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:55:10.500Z,1520700910.500 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:55:10.900Z,1520700910.900 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:55:11.304Z,1520700911.304 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:55:11.702Z,1520700911.702 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:55:12.104Z,1520700912.104 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:55:12.513Z,1520700912.513 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:55:12.901Z,1520700912.901 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:55:13.304Z,1520700913.304 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:55:13.713Z,1520700913.713 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:55:14.108Z,1520700914.108 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:55:14.504Z,1520700914.504 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:55:14.904Z,1520700914.904 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:55:15.300Z,1520700915.300 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:55:15.702Z,1520700915.702 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:55:16.104Z,1520700916.104 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:55:16.502Z,1520700916.502 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:55:16.998Z,1520700916.998 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:55:17.304Z,1520700917.304 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:55:17.690Z,1520700917.690 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:55:18.108Z,1520700918.108 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:55:18.505Z,1520700918.505 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:55:18.892Z,1520700918.892 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:55:19.308Z,1520700919.308 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:55:19.716Z,1520700919.716 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:55:20.092Z,1520700920.092 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:55:20.504Z,1520700920.504 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:55:20.916Z,1520700920.916 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:55:21.304Z,1520700921.304 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:55:21.700Z,1520700921.700 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:55:22.116Z,1520700922.116 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:55:22.492Z,1520700922.492 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:55:22.908Z,1520700922.908 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:55:23.300Z,1520700923.300 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:55:23.694Z,1520700923.694 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:55:24.097Z,1520700924.097 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:55:24.500Z,1520700924.500 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:55:24.896Z,1520700924.896 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:55:25.297Z,1520700925.297 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:55:25.696Z,1520700925.696 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:55:26.092Z,1520700926.092 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:55:26.496Z,1520700926.496 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:55:26.896Z,1520700926.896 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:55:30.053Z,1520700930.053 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:55:30.073Z,1520700930.073 [BPC1](FAULT): Failed to initialize
2018-03-10T16:55:30.073Z,1520700930.073 [BPC1] Communications Fault, FailCount= 4
2018-03-10T16:55:30.073Z,1520700930.073 [BPC1](ERROR): Communications Fault
2018-03-10T16:55:30.084Z,1520700930.084 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T16:55:30.084Z,1520700930.084 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 155
2018-03-10T16:55:30.084Z,1520700930.084 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-10T16:55:30.097Z,1520700930.097 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-10T16:55:30.097Z,1520700930.097 [CBIT](ERROR): Communications Fault in component: BPC1
2018-03-10T16:55:30.183Z,1520700930.183 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:55:30.216Z,1520700930.216 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-10T16:55:30.216Z,1520700930.216 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 155
2018-03-10T16:55:30.536Z,1520700930.536 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:55:30.573Z,1520700930.573 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-10T16:55:30.574Z,1520700930.574 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-10T16:55:30.574Z,1520700930.574 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-10T16:55:30.936Z,1520700930.936 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:55:31.013Z,1520700931.013 [CBIT](INFO): Clearing failed state for component BPC1
2018-03-10T16:55:31.013Z,1520700931.013 [BPC1] No Fault, FailCount= 4
2018-03-10T16:55:31.338Z,1520700931.338 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:55:31.748Z,1520700931.748 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:55:32.139Z,1520700932.139 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:55:32.538Z,1520700932.538 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:55:32.948Z,1520700932.948 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:55:33.340Z,1520700933.340 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:55:33.738Z,1520700933.738 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:55:34.138Z,1520700934.138 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:55:34.545Z,1520700934.545 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:55:34.937Z,1520700934.937 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:55:35.345Z,1520700935.345 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:55:35.729Z,1520700935.729 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:55:36.143Z,1520700936.143 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:55:36.540Z,1520700936.540 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:55:36.925Z,1520700936.925 [NAL9602](INFO): Powering down
2018-03-10T16:55:36.965Z,1520700936.965 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:55:37.333Z,1520700937.333 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:55:37.733Z,1520700937.733 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:55:38.133Z,1520700938.133 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:55:38.529Z,1520700938.529 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:55:38.933Z,1520700938.933 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:55:39.329Z,1520700939.329 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:55:39.730Z,1520700939.730 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:55:40.132Z,1520700940.132 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:55:40.540Z,1520700940.540 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:55:40.938Z,1520700940.938 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:55:41.338Z,1520700941.338 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:55:41.740Z,1520700941.740 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:55:42.136Z,1520700942.136 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:55:42.170Z,1520700942.170 [CBIT](DEBUG): EFC running - data check-sum false
2018-03-10T16:55:42.540Z,1520700942.540 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:55:42.936Z,1520700942.936 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:55:43.336Z,1520700943.336 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:55:43.736Z,1520700943.736 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:55:44.141Z,1520700944.141 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:55:44.528Z,1520700944.528 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:55:44.940Z,1520700944.940 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:55:45.341Z,1520700945.341 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:55:45.741Z,1520700945.741 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:55:46.136Z,1520700946.136 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:55:46.528Z,1520700946.528 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:55:46.925Z,1520700946.925 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:55:47.332Z,1520700947.332 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:55:47.729Z,1520700947.729 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:55:48.128Z,1520700948.128 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:55:48.532Z,1520700948.532 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:55:48.928Z,1520700948.928 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:55:49.337Z,1520700949.337 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:55:49.732Z,1520700949.732 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:55:50.136Z,1520700950.136 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:55:50.532Z,1520700950.532 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:55:50.932Z,1520700950.932 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:55:51.332Z,1520700951.332 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:55:51.737Z,1520700951.737 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:55:52.137Z,1520700952.137 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:55:52.538Z,1520700952.538 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:55:52.941Z,1520700952.941 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:55:53.338Z,1520700953.338 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:55:53.740Z,1520700953.740 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:55:54.135Z,1520700954.135 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:55:54.548Z,1520700954.548 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:55:54.940Z,1520700954.940 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:55:55.328Z,1520700955.328 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:55:55.745Z,1520700955.745 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:55:56.128Z,1520700956.128 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:55:56.532Z,1520700956.532 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:55:56.954Z,1520700956.954 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:55:57.332Z,1520700957.332 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:55:57.730Z,1520700957.730 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:55:58.132Z,1520700958.132 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:55:58.532Z,1520700958.532 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:55:58.928Z,1520700958.928 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:55:59.333Z,1520700959.333 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:55:59.728Z,1520700959.728 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:56:00.126Z,1520700960.126 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:56:00.532Z,1520700960.532 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:56:00.928Z,1520700960.928 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:56:01.336Z,1520700961.336 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:56:01.740Z,1520700961.740 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:56:02.132Z,1520700962.132 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:56:02.536Z,1520700962.536 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:56:02.937Z,1520700962.937 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:56:03.341Z,1520700963.341 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:56:03.741Z,1520700963.741 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:56:04.148Z,1520700964.148 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:56:04.539Z,1520700964.539 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:56:04.940Z,1520700964.940 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:56:05.340Z,1520700965.340 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:56:05.738Z,1520700965.738 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:56:06.136Z,1520700966.136 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:56:06.540Z,1520700966.540 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:56:06.941Z,1520700966.941 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:56:07.340Z,1520700967.340 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:56:07.740Z,1520700967.740 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:56:08.137Z,1520700968.137 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:56:08.528Z,1520700968.528 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:56:08.948Z,1520700968.948 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:56:09.329Z,1520700969.329 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:56:09.732Z,1520700969.732 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:56:10.132Z,1520700970.132 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:56:10.528Z,1520700970.528 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:56:10.938Z,1520700970.938 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:56:11.332Z,1520700971.332 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:56:11.728Z,1520700971.728 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:56:12.136Z,1520700972.136 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:56:12.536Z,1520700972.536 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:56:12.932Z,1520700972.932 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:56:13.336Z,1520700973.336 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:56:13.740Z,1520700973.740 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:56:14.140Z,1520700974.140 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:56:14.539Z,1520700974.539 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:56:14.940Z,1520700974.940 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:56:15.342Z,1520700975.342 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:56:15.744Z,1520700975.744 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:56:16.142Z,1520700976.142 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:56:16.546Z,1520700976.546 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:56:16.942Z,1520700976.942 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:56:17.350Z,1520700977.350 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:56:17.750Z,1520700977.750 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:56:18.146Z,1520700978.146 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:56:18.533Z,1520700978.533 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:56:18.927Z,1520700978.927 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:56:19.337Z,1520700979.337 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:56:19.731Z,1520700979.731 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:56:20.132Z,1520700980.132 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:56:20.541Z,1520700980.541 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:56:20.944Z,1520700980.944 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:56:21.341Z,1520700981.341 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:56:21.739Z,1520700981.739 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:56:22.140Z,1520700982.140 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:56:22.540Z,1520700982.540 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:56:22.935Z,1520700982.935 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:56:23.339Z,1520700983.339 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:56:23.740Z,1520700983.740 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:56:24.135Z,1520700984.135 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:56:24.536Z,1520700984.536 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:56:24.937Z,1520700984.937 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:56:25.345Z,1520700985.345 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:56:25.740Z,1520700985.740 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:56:26.144Z,1520700986.144 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:56:26.536Z,1520700986.536 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:56:26.940Z,1520700986.940 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:56:30.204Z,1520700990.204 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:56:30.356Z,1520700990.356 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:56:30.740Z,1520700990.740 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:56:31.142Z,1520700991.142 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:56:31.522Z,1520700991.522 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:56:31.922Z,1520700991.922 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:56:32.320Z,1520700992.320 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:56:32.718Z,1520700992.718 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:56:33.122Z,1520700993.122 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:56:33.506Z,1520700993.506 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:56:33.906Z,1520700993.906 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:56:34.310Z,1520700994.310 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:56:34.714Z,1520700994.714 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:56:35.140Z,1520700995.140 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:56:35.515Z,1520700995.515 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:56:35.900Z,1520700995.900 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:56:36.300Z,1520700996.300 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:56:36.705Z,1520700996.705 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:56:37.100Z,1520700997.100 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:56:37.504Z,1520700997.504 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:56:37.939Z,1520700997.939 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:56:38.332Z,1520700998.332 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:56:38.719Z,1520700998.719 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:56:39.111Z,1520700999.111 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:56:39.504Z,1520700999.504 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:56:39.917Z,1520700999.917 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:56:40.316Z,1520701000.316 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:56:40.711Z,1520701000.711 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:56:41.105Z,1520701001.105 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:56:41.514Z,1520701001.514 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:56:41.951Z,1520701001.951 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:56:42.332Z,1520701002.332 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:56:42.725Z,1520701002.725 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:56:43.135Z,1520701003.135 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:56:43.550Z,1520701003.550 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:56:43.924Z,1520701003.924 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:56:44.335Z,1520701004.335 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:56:44.700Z,1520701004.700 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:56:45.126Z,1520701005.126 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:56:45.521Z,1520701005.521 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:56:45.900Z,1520701005.900 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:56:46.304Z,1520701006.304 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:56:46.721Z,1520701006.721 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:56:47.100Z,1520701007.100 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:56:47.504Z,1520701007.504 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:56:47.910Z,1520701007.910 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:56:48.344Z,1520701008.344 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:56:48.721Z,1520701008.721 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:56:49.118Z,1520701009.118 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:56:49.506Z,1520701009.506 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:56:49.941Z,1520701009.941 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:56:50.341Z,1520701010.341 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:56:50.728Z,1520701010.728 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:56:51.142Z,1520701011.142 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:56:51.505Z,1520701011.505 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:56:51.922Z,1520701011.922 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:56:52.316Z,1520701012.316 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:56:52.732Z,1520701012.732 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:56:53.122Z,1520701013.122 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:56:53.513Z,1520701013.513 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:56:53.906Z,1520701013.906 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:56:54.335Z,1520701014.335 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:56:54.712Z,1520701014.712 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:56:55.147Z,1520701015.147 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:56:55.506Z,1520701015.506 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:56:55.929Z,1520701015.929 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:56:56.324Z,1520701016.324 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:56:56.744Z,1520701016.744 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:56:57.132Z,1520701017.132 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:56:57.510Z,1520701017.510 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:56:57.931Z,1520701017.931 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:56:58.304Z,1520701018.304 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:56:58.724Z,1520701018.724 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:56:59.100Z,1520701019.100 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:56:59.504Z,1520701019.504 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:56:59.924Z,1520701019.924 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:57:00.300Z,1520701020.300 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:57:00.712Z,1520701020.712 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:57:01.105Z,1520701021.105 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:57:01.510Z,1520701021.510 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:57:01.915Z,1520701021.915 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:57:02.337Z,1520701022.337 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:57:02.746Z,1520701022.746 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:57:03.125Z,1520701023.125 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:57:03.529Z,1520701023.529 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:57:03.905Z,1520701023.905 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:57:04.316Z,1520701024.316 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:57:04.730Z,1520701024.730 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:57:05.102Z,1520701025.102 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:57:05.504Z,1520701025.504 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:57:05.905Z,1520701025.905 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:57:06.318Z,1520701026.318 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:57:06.721Z,1520701026.721 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:57:07.116Z,1520701027.116 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:57:07.522Z,1520701027.522 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:57:07.923Z,1520701027.923 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:57:08.315Z,1520701028.315 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:57:08.705Z,1520701028.705 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:57:09.116Z,1520701029.116 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:57:09.512Z,1520701029.512 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:57:09.954Z,1520701029.954 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:57:10.329Z,1520701030.329 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:57:10.706Z,1520701030.706 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:57:11.105Z,1520701031.105 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:57:11.539Z,1520701031.539 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:57:11.904Z,1520701031.904 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:57:12.301Z,1520701032.301 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:57:12.732Z,1520701032.732 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:57:13.104Z,1520701033.104 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:57:13.504Z,1520701033.504 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:57:13.918Z,1520701033.918 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:57:14.317Z,1520701034.317 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:57:14.723Z,1520701034.723 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:57:15.122Z,1520701035.122 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:57:15.519Z,1520701035.519 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:57:15.910Z,1520701035.910 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:57:16.314Z,1520701036.314 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:57:16.702Z,1520701036.702 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:57:17.161Z,1520701037.161 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:57:17.527Z,1520701037.527 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:57:17.900Z,1520701037.900 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:57:18.300Z,1520701038.300 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:57:18.704Z,1520701038.704 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:57:19.104Z,1520701039.104 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:57:19.504Z,1520701039.504 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:57:19.900Z,1520701039.900 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:57:20.300Z,1520701040.300 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:57:20.704Z,1520701040.704 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:57:21.105Z,1520701041.105 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:57:21.504Z,1520701041.504 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:57:21.917Z,1520701041.917 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:57:22.313Z,1520701042.313 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:57:22.715Z,1520701042.715 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:57:23.118Z,1520701043.118 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:57:23.512Z,1520701043.512 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:57:23.954Z,1520701043.954 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:57:24.332Z,1520701044.332 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:57:24.704Z,1520701044.704 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:57:25.100Z,1520701045.100 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:57:25.500Z,1520701045.500 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:57:25.940Z,1520701045.940 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:57:26.309Z,1520701046.309 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:57:26.726Z,1520701046.726 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:57:27.134Z,1520701047.134 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:57:30.253Z,1520701050.253 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:57:30.374Z,1520701050.374 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:57:30.753Z,1520701050.753 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:57:31.181Z,1520701051.181 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:57:31.572Z,1520701051.572 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:57:31.960Z,1520701051.960 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:57:32.361Z,1520701052.361 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:57:32.740Z,1520701052.740 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:57:33.159Z,1520701053.159 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:57:33.548Z,1520701053.548 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:57:33.956Z,1520701053.956 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:57:34.365Z,1520701054.365 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:57:34.753Z,1520701054.753 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:57:35.148Z,1520701055.148 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:57:35.543Z,1520701055.543 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:57:35.948Z,1520701055.948 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:57:36.346Z,1520701056.346 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:57:36.740Z,1520701056.740 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:57:37.140Z,1520701057.140 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:57:37.545Z,1520701057.545 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:57:37.949Z,1520701057.949 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:57:38.378Z,1520701058.378 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:57:38.762Z,1520701058.762 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:57:39.153Z,1520701059.153 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:57:39.559Z,1520701059.559 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:57:39.960Z,1520701059.960 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:57:40.348Z,1520701060.348 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:57:40.761Z,1520701060.761 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:57:41.153Z,1520701061.153 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:57:41.561Z,1520701061.561 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:57:41.967Z,1520701061.967 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:57:42.346Z,1520701062.346 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:57:42.761Z,1520701062.761 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:57:43.140Z,1520701063.140 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:57:43.556Z,1520701063.556 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:57:43.961Z,1520701063.961 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:57:44.340Z,1520701064.340 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:57:44.741Z,1520701064.741 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:57:45.141Z,1520701065.141 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:57:45.544Z,1520701065.544 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:57:45.975Z,1520701065.975 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:57:46.358Z,1520701066.358 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:57:46.756Z,1520701066.756 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:57:47.157Z,1520701067.157 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:57:47.556Z,1520701067.556 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:57:47.944Z,1520701067.944 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:57:48.357Z,1520701068.357 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:57:48.751Z,1520701068.751 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:57:49.157Z,1520701069.157 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:57:49.560Z,1520701069.560 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:57:49.951Z,1520701069.951 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:57:50.352Z,1520701070.352 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:57:50.753Z,1520701070.753 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:57:51.140Z,1520701071.140 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:57:51.545Z,1520701071.545 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:57:51.960Z,1520701071.960 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:57:52.359Z,1520701072.359 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:57:52.745Z,1520701072.745 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:57:53.138Z,1520701073.138 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:57:53.541Z,1520701073.541 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:57:53.975Z,1520701073.975 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:57:54.375Z,1520701074.375 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:57:54.740Z,1520701074.740 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:57:55.153Z,1520701075.153 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:57:55.549Z,1520701075.549 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:57:55.947Z,1520701075.947 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:57:56.378Z,1520701076.378 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:57:56.750Z,1520701076.750 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:57:57.157Z,1520701077.157 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:57:57.548Z,1520701077.548 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:57:57.949Z,1520701077.949 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:57:58.350Z,1520701078.350 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:57:58.752Z,1520701078.752 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:57:59.152Z,1520701079.152 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:57:59.554Z,1520701079.554 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:57:59.949Z,1520701079.949 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:58:00.349Z,1520701080.349 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:58:00.744Z,1520701080.744 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:58:01.153Z,1520701081.153 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:58:01.562Z,1520701081.562 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:58:01.968Z,1520701081.968 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:58:02.365Z,1520701082.365 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:58:02.756Z,1520701082.756 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:58:03.169Z,1520701083.169 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:58:03.573Z,1520701083.573 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:58:03.973Z,1520701083.973 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:58:04.341Z,1520701084.341 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:58:04.753Z,1520701084.753 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:58:05.162Z,1520701085.162 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:58:05.550Z,1520701085.550 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:58:05.951Z,1520701085.951 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:58:06.348Z,1520701086.348 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:58:06.753Z,1520701086.753 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:58:07.152Z,1520701087.152 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:58:07.546Z,1520701087.546 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:58:07.946Z,1520701087.946 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:58:08.350Z,1520701088.350 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:58:08.738Z,1520701088.738 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:58:09.160Z,1520701089.160 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:58:09.565Z,1520701089.565 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:58:09.972Z,1520701089.972 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:58:10.352Z,1520701090.352 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:58:10.760Z,1520701090.760 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:58:11.164Z,1520701091.164 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:58:11.540Z,1520701091.540 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:58:11.965Z,1520701091.965 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:58:12.353Z,1520701092.353 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:58:12.763Z,1520701092.763 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:58:13.168Z,1520701093.168 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:58:13.557Z,1520701093.557 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:58:13.960Z,1520701093.960 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:58:14.341Z,1520701094.341 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:58:14.756Z,1520701094.756 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:58:15.145Z,1520701095.145 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:58:15.540Z,1520701095.540 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:58:15.948Z,1520701095.948 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:58:16.346Z,1520701096.346 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:58:16.744Z,1520701096.744 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:58:17.174Z,1520701097.174 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:58:17.552Z,1520701097.552 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:58:17.963Z,1520701097.963 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:58:18.355Z,1520701098.355 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:58:18.759Z,1520701098.759 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:58:19.148Z,1520701099.148 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:58:19.561Z,1520701099.561 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:58:19.949Z,1520701099.949 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:58:20.356Z,1520701100.356 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:58:20.764Z,1520701100.764 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:58:21.154Z,1520701101.154 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:58:21.552Z,1520701101.552 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:58:21.952Z,1520701101.952 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:58:22.361Z,1520701102.361 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:58:22.758Z,1520701102.758 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:58:23.139Z,1520701103.139 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:58:23.544Z,1520701103.544 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:58:23.940Z,1520701103.940 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:58:24.341Z,1520701104.341 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:58:24.764Z,1520701104.764 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:58:25.167Z,1520701105.167 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:58:25.573Z,1520701105.573 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:58:25.940Z,1520701105.940 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:58:26.355Z,1520701106.355 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:58:26.766Z,1520701106.766 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:58:27.147Z,1520701107.147 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:58:30.337Z,1520701110.337 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:58:30.474Z,1520701110.474 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:58:30.855Z,1520701110.855 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:58:30.874Z,1520701110.874 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T16:58:30.874Z,1520701110.874 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 156
2018-03-10T16:58:30.874Z,1520701110.874 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-10T16:58:30.915Z,1520701110.915 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-10T16:58:31.251Z,1520701111.251 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:58:31.315Z,1520701111.315 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-10T16:58:31.316Z,1520701111.316 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 156
2018-03-10T16:58:31.652Z,1520701111.652 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:58:31.670Z,1520701111.670 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-10T16:58:31.670Z,1520701111.670 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-10T16:58:31.671Z,1520701111.671 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-10T16:58:32.046Z,1520701112.046 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:58:32.448Z,1520701112.448 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:58:32.852Z,1520701112.852 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:58:33.261Z,1520701113.261 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:58:33.647Z,1520701113.647 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:58:34.048Z,1520701114.048 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:58:34.452Z,1520701114.452 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:58:34.853Z,1520701114.853 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:58:35.255Z,1520701115.255 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:58:35.648Z,1520701115.648 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:58:36.056Z,1520701116.056 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:58:36.458Z,1520701116.458 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:58:36.848Z,1520701116.848 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:58:37.256Z,1520701117.256 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:58:37.658Z,1520701117.658 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:58:38.061Z,1520701118.061 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:58:38.441Z,1520701118.441 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:58:38.845Z,1520701118.845 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:58:39.245Z,1520701119.245 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:58:39.644Z,1520701119.644 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:58:40.045Z,1520701120.045 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:58:40.466Z,1520701120.466 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:58:40.840Z,1520701120.840 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:58:41.244Z,1520701121.244 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:58:41.644Z,1520701121.644 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:58:42.045Z,1520701122.045 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:58:42.449Z,1520701122.449 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:58:42.856Z,1520701122.856 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:58:43.246Z,1520701123.246 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:58:43.653Z,1520701123.653 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:58:44.052Z,1520701124.052 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:58:44.453Z,1520701124.453 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:58:44.847Z,1520701124.847 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:58:45.253Z,1520701125.253 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:58:45.652Z,1520701125.652 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:58:46.048Z,1520701126.048 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:58:46.451Z,1520701126.451 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:58:46.852Z,1520701126.852 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:58:47.252Z,1520701127.252 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:58:47.656Z,1520701127.656 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:58:48.048Z,1520701128.048 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:58:48.448Z,1520701128.448 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:58:48.851Z,1520701128.851 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:58:49.256Z,1520701129.256 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:58:49.648Z,1520701129.648 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:58:50.051Z,1520701130.051 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:58:50.448Z,1520701130.448 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:58:50.847Z,1520701130.847 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:58:51.252Z,1520701131.252 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:58:51.652Z,1520701131.652 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:58:52.053Z,1520701132.053 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:58:52.451Z,1520701132.451 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:58:52.852Z,1520701132.852 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:58:53.248Z,1520701133.248 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:58:53.653Z,1520701133.653 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:58:54.057Z,1520701134.057 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:58:54.452Z,1520701134.452 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:58:54.852Z,1520701134.852 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:58:55.256Z,1520701135.256 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:58:55.644Z,1520701135.644 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:58:56.057Z,1520701136.057 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:58:56.456Z,1520701136.456 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:58:56.840Z,1520701136.840 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:58:57.244Z,1520701137.244 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:58:57.656Z,1520701137.656 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:58:58.056Z,1520701138.056 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:58:58.444Z,1520701138.444 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:58:58.864Z,1520701138.864 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:58:59.256Z,1520701139.256 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:58:59.664Z,1520701139.664 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:59:00.056Z,1520701140.056 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:59:00.440Z,1520701140.440 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:59:00.866Z,1520701140.866 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:59:01.256Z,1520701141.256 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:59:01.640Z,1520701141.640 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:59:02.044Z,1520701142.044 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:59:02.456Z,1520701142.456 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:59:02.856Z,1520701142.856 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:59:03.244Z,1520701143.244 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:59:03.656Z,1520701143.656 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:59:04.044Z,1520701144.044 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:59:04.444Z,1520701144.444 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:59:04.844Z,1520701144.844 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:59:05.239Z,1520701145.239 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:59:05.641Z,1520701145.641 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:59:06.044Z,1520701146.044 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:59:06.444Z,1520701146.444 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:59:06.844Z,1520701146.844 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:59:07.263Z,1520701147.263 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:59:07.640Z,1520701147.640 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:59:08.040Z,1520701148.040 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:59:08.447Z,1520701148.447 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:59:08.852Z,1520701148.852 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:59:09.256Z,1520701149.256 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:59:09.652Z,1520701149.652 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:59:10.048Z,1520701150.048 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:59:10.453Z,1520701150.453 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:59:10.853Z,1520701150.853 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:59:11.252Z,1520701151.252 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:59:11.659Z,1520701151.659 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:59:12.054Z,1520701152.054 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:59:12.457Z,1520701152.457 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:59:12.856Z,1520701152.856 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:59:13.257Z,1520701153.257 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:59:13.652Z,1520701153.652 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:59:14.047Z,1520701154.047 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:59:14.452Z,1520701154.452 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:59:14.852Z,1520701154.852 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:59:15.255Z,1520701155.255 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:59:15.657Z,1520701155.657 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:59:16.057Z,1520701156.057 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:59:16.451Z,1520701156.451 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:59:16.856Z,1520701156.856 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:59:17.252Z,1520701157.252 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:59:17.645Z,1520701157.645 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:59:18.040Z,1520701158.040 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:59:18.444Z,1520701158.444 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:59:18.845Z,1520701158.845 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:59:19.240Z,1520701159.240 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:59:19.644Z,1520701159.644 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:59:20.063Z,1520701160.063 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:59:20.441Z,1520701160.441 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:59:20.849Z,1520701160.849 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:59:21.245Z,1520701161.245 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:59:21.649Z,1520701161.649 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:59:22.040Z,1520701162.040 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:59:22.448Z,1520701162.448 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:59:22.841Z,1520701162.841 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:59:23.243Z,1520701163.243 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:59:23.652Z,1520701163.652 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:59:24.051Z,1520701164.051 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:59:24.449Z,1520701164.449 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:59:24.850Z,1520701164.850 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:59:25.249Z,1520701165.249 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:59:25.649Z,1520701165.649 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:59:26.050Z,1520701166.050 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:59:26.452Z,1520701166.452 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:59:26.472Z,1520701166.472 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-03-10T16:59:26.472Z,1520701166.472 [Default:CheckIn:C.Wait] Stopped
2018-03-10T16:59:26.472Z,1520701166.472 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-03-10T16:59:26.472Z,1520701166.472 [Default:CheckIn:D] Running Loop=1
2018-03-10T16:59:26.848Z,1520701166.848 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:59:26.882Z,1520701166.882 [Default:CheckIn:D] Stopped
2018-03-10T16:59:26.883Z,1520701166.883 [Default:CheckIn:E] Running Loop=1
2018-03-10T16:59:27.252Z,1520701167.252 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:59:27.272Z,1520701167.272 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 700.149349 min 
2018-03-10T16:59:27.272Z,1520701167.272 [Default:CheckIn:E] Stopped
2018-03-10T16:59:27.272Z,1520701167.272 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-03-10T16:59:27.272Z,1520701167.272 [Default:CheckIn] Stopped
2018-03-10T16:59:27.273Z,1520701167.273 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-03-10T16:59:27.273Z,1520701167.273 [Default:CheckIn](INFO): Running loop #69
2018-03-10T16:59:27.273Z,1520701167.273 [Default:CheckIn] Running Loop=69
2018-03-10T16:59:27.273Z,1520701167.273 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-03-10T16:59:27.273Z,1520701167.273 [Default:CheckIn:Read_GPS] Running Loop=1
2018-03-10T16:59:30.460Z,1520701170.460 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:59:30.570Z,1520701170.570 [NAL9602](INFO): Powering up
2018-03-10T16:59:30.591Z,1520701170.591 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:59:30.982Z,1520701170.982 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:59:31.378Z,1520701171.378 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:59:31.773Z,1520701171.773 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:59:32.185Z,1520701172.185 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:59:32.557Z,1520701172.557 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:59:32.962Z,1520701172.962 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:59:33.360Z,1520701173.360 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:59:33.764Z,1520701173.764 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:59:34.160Z,1520701174.160 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:59:34.566Z,1520701174.566 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:59:34.964Z,1520701174.964 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:59:35.364Z,1520701175.364 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:59:35.760Z,1520701175.760 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:59:36.161Z,1520701176.161 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:59:36.556Z,1520701176.556 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:59:36.984Z,1520701176.984 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:59:37.360Z,1520701177.360 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:59:37.758Z,1520701177.758 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:59:38.180Z,1520701178.180 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:59:38.560Z,1520701178.560 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:59:38.966Z,1520701178.966 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:59:39.362Z,1520701179.362 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:59:39.764Z,1520701179.764 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:59:40.159Z,1520701180.159 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:59:40.565Z,1520701180.565 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:59:40.963Z,1520701180.963 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:59:41.371Z,1520701181.371 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:59:41.744Z,1520701181.744 [NAL9602](INFO): NAL9602 initialized
2018-03-10T16:59:41.761Z,1520701181.761 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:59:42.170Z,1520701182.170 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:59:42.573Z,1520701182.573 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:59:42.979Z,1520701182.979 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:59:43.385Z,1520701183.385 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:59:43.773Z,1520701183.773 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:59:44.168Z,1520701184.168 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:59:44.566Z,1520701184.566 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:59:44.979Z,1520701184.979 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:59:45.368Z,1520701185.368 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:59:45.763Z,1520701185.763 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:59:46.164Z,1520701186.164 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:59:46.561Z,1520701186.561 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:59:46.956Z,1520701186.956 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:59:47.367Z,1520701187.367 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:59:47.760Z,1520701187.760 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:59:48.156Z,1520701188.156 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:59:48.564Z,1520701188.564 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:59:48.958Z,1520701188.958 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:59:49.360Z,1520701189.360 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:59:49.786Z,1520701189.786 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:59:50.183Z,1520701190.183 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:59:50.561Z,1520701190.561 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:59:50.961Z,1520701190.961 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:59:51.384Z,1520701191.384 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:59:51.756Z,1520701191.756 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:59:52.184Z,1520701192.184 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:59:52.561Z,1520701192.561 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:59:52.960Z,1520701192.960 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:59:53.366Z,1520701193.366 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:59:53.763Z,1520701193.763 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:59:54.165Z,1520701194.165 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:59:54.569Z,1520701194.569 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:59:54.970Z,1520701194.970 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:59:55.364Z,1520701195.364 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:59:55.769Z,1520701195.769 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:59:56.178Z,1520701196.178 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:59:56.568Z,1520701196.568 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:59:56.971Z,1520701196.971 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:59:57.373Z,1520701197.373 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:59:57.769Z,1520701197.769 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:59:58.168Z,1520701198.168 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:59:58.578Z,1520701198.578 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:59:58.967Z,1520701198.967 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:59:59.373Z,1520701199.373 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T16:59:59.775Z,1520701199.775 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:00:00.166Z,1520701200.166 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:00:00.573Z,1520701200.573 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:00:00.973Z,1520701200.973 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:00:01.356Z,1520701201.356 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:00:01.776Z,1520701201.776 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:00:02.172Z,1520701202.172 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:00:02.560Z,1520701202.560 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:00:02.986Z,1520701202.986 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:00:03.362Z,1520701203.362 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:00:03.759Z,1520701203.759 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:00:04.179Z,1520701204.179 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:00:04.561Z,1520701204.561 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:00:04.974Z,1520701204.974 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:00:05.361Z,1520701205.361 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:00:05.774Z,1520701205.774 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:00:06.161Z,1520701206.161 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:00:06.577Z,1520701206.577 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:00:06.961Z,1520701206.961 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:00:07.360Z,1520701207.360 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:00:07.766Z,1520701207.766 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:00:08.185Z,1520701208.185 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:00:08.565Z,1520701208.565 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:00:08.961Z,1520701208.961 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:00:09.361Z,1520701209.361 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:00:09.776Z,1520701209.776 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:00:10.165Z,1520701210.165 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:00:10.578Z,1520701210.578 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:00:10.967Z,1520701210.967 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:00:11.371Z,1520701211.371 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:00:11.767Z,1520701211.767 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:00:12.168Z,1520701212.168 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:00:12.562Z,1520701212.562 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:00:12.970Z,1520701212.970 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:00:13.369Z,1520701213.369 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:00:13.738Z,1520701213.738 [NAL9602](ERROR): Failed to receive proper response when querying signal strength for MT queue check.
2018-03-10T17:00:13.811Z,1520701213.811 [NAL9602](FAULT): received: 
+CSQ:0

OK36, 2, 0, 0, 0

OK
2018-03-10T17:00:13.811Z,1520701213.811 [NAL9602] Data Fault, FailCount= 3
2018-03-10T17:00:13.811Z,1520701213.811 [NAL9602](ERROR): Data Fault
2018-03-10T17:00:13.829Z,1520701213.829 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:00:13.900Z,1520701213.900 [CBIT](ERROR): Data Fault in component: NAL9602
2018-03-10T17:00:14.144Z,1520701214.144 [NAL9602](INFO): Powering down
2018-03-10T17:00:14.167Z,1520701214.167 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:00:14.573Z,1520701214.573 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:00:14.965Z,1520701214.965 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:00:15.041Z,1520701215.041 [CBIT](INFO): Clearing failed state for component NAL9602
2018-03-10T17:00:15.041Z,1520701215.041 [NAL9602] No Fault, FailCount= 3
2018-03-10T17:00:15.379Z,1520701215.379 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:00:15.773Z,1520701215.773 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:00:16.157Z,1520701216.157 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:00:16.581Z,1520701216.581 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:00:16.960Z,1520701216.960 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:00:17.376Z,1520701217.376 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:00:17.761Z,1520701217.761 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:00:18.160Z,1520701218.160 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:00:18.556Z,1520701218.556 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:00:18.960Z,1520701218.960 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:00:19.366Z,1520701219.366 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:00:19.756Z,1520701219.756 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:00:20.160Z,1520701220.160 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:00:20.555Z,1520701220.555 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:00:20.967Z,1520701220.967 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:00:21.366Z,1520701221.366 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:00:21.767Z,1520701221.767 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:00:22.167Z,1520701222.167 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:00:22.567Z,1520701222.567 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:00:22.972Z,1520701222.972 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:00:23.365Z,1520701223.365 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:00:23.771Z,1520701223.771 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:00:24.172Z,1520701224.172 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:00:24.564Z,1520701224.564 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:00:24.972Z,1520701224.972 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:00:25.375Z,1520701225.375 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:00:25.757Z,1520701225.757 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:00:26.165Z,1520701226.165 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:00:26.572Z,1520701226.572 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:00:26.958Z,1520701226.958 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:00:27.371Z,1520701227.371 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:00:30.698Z,1520701230.698 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:00:30.830Z,1520701230.830 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:00:31.195Z,1520701231.195 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:00:31.591Z,1520701231.591 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:00:31.996Z,1520701231.996 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:00:32.393Z,1520701232.393 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:00:32.788Z,1520701232.788 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:00:33.193Z,1520701233.193 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:00:33.592Z,1520701233.592 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:00:33.995Z,1520701233.995 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:00:34.387Z,1520701234.387 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:00:34.801Z,1520701234.801 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:00:35.180Z,1520701235.180 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:00:35.580Z,1520701235.580 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:00:36.004Z,1520701236.004 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:00:36.380Z,1520701236.380 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:00:36.780Z,1520701236.780 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:00:37.184Z,1520701237.184 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:00:37.580Z,1520701237.580 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:00:37.988Z,1520701237.988 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:00:38.388Z,1520701238.388 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:00:38.785Z,1520701238.785 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:00:39.182Z,1520701239.182 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:00:39.590Z,1520701239.590 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:00:39.992Z,1520701239.992 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:00:40.389Z,1520701240.389 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:00:40.793Z,1520701240.793 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:00:41.193Z,1520701241.193 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:00:41.588Z,1520701241.588 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:00:41.998Z,1520701241.998 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:00:42.401Z,1520701242.401 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:00:42.792Z,1520701242.792 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:00:43.204Z,1520701243.204 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:00:43.597Z,1520701243.597 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:00:43.992Z,1520701243.992 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:00:44.368Z,1520701244.368 [NAL9602](INFO): Powering up NAL9602
2018-03-10T17:00:44.392Z,1520701244.392 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:00:44.796Z,1520701244.796 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:00:45.180Z,1520701245.180 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:00:45.589Z,1520701245.589 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:00:45.984Z,1520701245.984 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:00:46.380Z,1520701246.380 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:00:46.788Z,1520701246.788 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:00:47.180Z,1520701247.180 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:00:47.584Z,1520701247.584 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:00:47.984Z,1520701247.984 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:00:48.384Z,1520701248.384 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:00:48.792Z,1520701248.792 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:00:49.192Z,1520701249.192 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:00:49.589Z,1520701249.589 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:00:49.991Z,1520701249.991 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:00:50.387Z,1520701250.387 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:00:50.793Z,1520701250.793 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:00:51.190Z,1520701251.190 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:00:51.590Z,1520701251.590 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:00:51.988Z,1520701251.988 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:00:52.388Z,1520701252.388 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:00:52.788Z,1520701252.788 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:00:53.197Z,1520701253.197 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:00:53.580Z,1520701253.580 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:00:54.004Z,1520701254.004 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:00:54.380Z,1520701254.380 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:00:54.792Z,1520701254.792 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:00:55.211Z,1520701255.211 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:00:55.572Z,1520701255.572 [NAL9602](INFO): NAL9602 initialized
2018-03-10T17:00:55.600Z,1520701255.600 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:00:55.994Z,1520701255.994 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:00:56.368Z,1520701256.368 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-03-10T17:00:56.368Z,1520701256.368 [NAL9602] Data Fault, FailCount= 4
2018-03-10T17:00:56.368Z,1520701256.368 [NAL9602](ERROR): Data Fault
2018-03-10T17:00:56.385Z,1520701256.385 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:00:56.457Z,1520701256.457 [CBIT](ERROR): Data Fault in component: NAL9602
2018-03-10T17:00:56.768Z,1520701256.768 [NAL9602](INFO): Powering down
2018-03-10T17:00:56.785Z,1520701256.785 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:00:57.184Z,1520701257.184 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:00:57.587Z,1520701257.587 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:00:57.656Z,1520701257.656 [CBIT](INFO): Clearing failed state for component NAL9602
2018-03-10T17:00:57.656Z,1520701257.656 [NAL9602] No Fault, FailCount= 4
2018-03-10T17:00:57.985Z,1520701257.985 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:00:58.388Z,1520701258.388 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:00:58.788Z,1520701258.788 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:00:59.189Z,1520701259.189 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:00:59.589Z,1520701259.589 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:00:59.993Z,1520701259.993 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:01:00.390Z,1520701260.390 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:01:00.794Z,1520701260.794 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:01:01.192Z,1520701261.192 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:01:01.589Z,1520701261.589 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:01:01.990Z,1520701261.990 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:01:02.398Z,1520701262.398 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:01:02.796Z,1520701262.796 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:01:03.187Z,1520701263.187 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:01:03.598Z,1520701263.598 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:01:03.993Z,1520701263.993 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:01:04.394Z,1520701264.394 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:01:04.799Z,1520701264.799 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:01:05.194Z,1520701265.194 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:01:05.600Z,1520701265.600 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:01:05.989Z,1520701265.989 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:01:06.387Z,1520701266.387 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:01:06.791Z,1520701266.791 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:01:07.193Z,1520701267.193 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:01:07.593Z,1520701267.593 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:01:07.992Z,1520701267.992 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:01:08.392Z,1520701268.392 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:01:08.788Z,1520701268.788 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:01:09.196Z,1520701269.196 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:01:09.588Z,1520701269.588 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:01:09.996Z,1520701269.996 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:01:10.396Z,1520701270.396 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:01:10.788Z,1520701270.788 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:01:11.192Z,1520701271.192 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:01:11.592Z,1520701271.592 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:01:11.992Z,1520701271.992 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:01:12.393Z,1520701272.393 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:01:12.780Z,1520701272.780 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:01:13.184Z,1520701273.184 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:01:13.580Z,1520701273.580 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:01:13.984Z,1520701273.984 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:01:14.406Z,1520701274.406 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:01:14.796Z,1520701274.796 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:01:15.182Z,1520701275.182 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:01:15.580Z,1520701275.580 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:01:15.980Z,1520701275.980 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:01:16.396Z,1520701276.396 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:01:16.784Z,1520701276.784 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:01:17.196Z,1520701277.196 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:01:17.580Z,1520701277.580 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:01:17.984Z,1520701277.984 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:01:18.380Z,1520701278.380 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:01:18.780Z,1520701278.780 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:01:19.203Z,1520701279.203 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:01:19.584Z,1520701279.584 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:01:19.984Z,1520701279.984 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:01:20.384Z,1520701280.384 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:01:20.780Z,1520701280.780 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:01:21.183Z,1520701281.183 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:01:21.584Z,1520701281.584 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:01:21.983Z,1520701281.983 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:01:22.380Z,1520701282.380 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:01:22.784Z,1520701282.784 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:01:23.192Z,1520701283.192 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:01:23.592Z,1520701283.592 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:01:23.993Z,1520701283.993 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:01:24.393Z,1520701284.393 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:01:24.792Z,1520701284.792 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:01:25.191Z,1520701285.191 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:01:25.591Z,1520701285.592 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:01:25.988Z,1520701285.988 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:01:26.388Z,1520701286.388 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:01:26.793Z,1520701286.793 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:01:27.164Z,1520701287.164 [NAL9602](INFO): Powering up NAL9602
2018-03-10T17:01:27.194Z,1520701287.194 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:01:27.592Z,1520701287.592 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:01:30.744Z,1520701290.744 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:01:30.850Z,1520701290.850 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:01:31.216Z,1520701291.216 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:01:31.612Z,1520701291.612 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:01:32.016Z,1520701292.016 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:01:32.057Z,1520701292.057 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T17:01:32.057Z,1520701292.057 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 157
2018-03-10T17:01:32.057Z,1520701292.057 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-10T17:01:32.078Z,1520701292.078 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-10T17:01:32.416Z,1520701292.416 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:01:32.475Z,1520701292.475 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-10T17:01:32.475Z,1520701292.475 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 157
2018-03-10T17:01:32.818Z,1520701292.818 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:01:32.844Z,1520701292.844 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-10T17:01:32.844Z,1520701292.844 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-10T17:01:32.845Z,1520701292.845 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-10T17:01:33.216Z,1520701293.216 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:01:33.625Z,1520701293.625 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:01:34.020Z,1520701294.020 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:01:34.416Z,1520701294.416 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:01:34.817Z,1520701294.817 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:01:35.212Z,1520701295.212 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:01:35.616Z,1520701295.616 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:01:36.020Z,1520701296.020 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:01:36.420Z,1520701296.420 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:01:36.804Z,1520701296.804 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:01:37.212Z,1520701297.212 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:01:37.635Z,1520701297.635 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:01:37.996Z,1520701297.996 [NAL9602](INFO): NAL9602 initialized
2018-03-10T17:01:38.013Z,1520701298.013 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:01:38.435Z,1520701298.435 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:01:38.840Z,1520701298.840 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:01:39.227Z,1520701299.227 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:01:39.628Z,1520701299.628 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:01:40.030Z,1520701300.030 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:01:40.405Z,1520701300.405 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:01:40.828Z,1520701300.828 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:01:41.214Z,1520701301.214 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:01:41.615Z,1520701301.615 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:01:42.029Z,1520701302.029 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:01:42.424Z,1520701302.424 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:01:42.809Z,1520701302.809 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:01:43.228Z,1520701303.228 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:01:43.613Z,1520701303.613 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:01:44.005Z,1520701304.005 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:01:44.409Z,1520701304.409 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:01:44.818Z,1520701304.818 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:01:45.214Z,1520701305.214 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:01:45.615Z,1520701305.615 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:01:46.019Z,1520701306.019 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:01:46.423Z,1520701306.423 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:01:46.830Z,1520701306.830 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:01:47.239Z,1520701307.239 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:01:47.622Z,1520701307.622 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:01:48.023Z,1520701308.023 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:01:48.425Z,1520701308.425 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:01:48.830Z,1520701308.830 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:01:49.218Z,1520701309.218 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:01:49.617Z,1520701309.617 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:01:50.015Z,1520701310.015 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:01:50.417Z,1520701310.417 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:01:50.842Z,1520701310.842 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:01:51.221Z,1520701311.221 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:01:51.623Z,1520701311.623 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:01:52.023Z,1520701312.023 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:01:52.422Z,1520701312.422 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:01:52.826Z,1520701312.826 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:01:53.217Z,1520701313.217 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:01:53.612Z,1520701313.612 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:01:54.022Z,1520701314.022 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:01:54.417Z,1520701314.417 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:01:54.820Z,1520701314.820 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:01:55.216Z,1520701315.216 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:01:55.617Z,1520701315.617 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:01:56.016Z,1520701316.016 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:01:56.412Z,1520701316.412 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:01:56.831Z,1520701316.831 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:01:57.227Z,1520701317.227 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:01:57.628Z,1520701317.628 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:01:58.028Z,1520701318.028 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:01:58.417Z,1520701318.417 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:01:58.829Z,1520701318.829 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:01:59.218Z,1520701319.218 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:01:59.615Z,1520701319.615 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:02:00.015Z,1520701320.015 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:02:00.404Z,1520701320.404 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:02:00.822Z,1520701320.822 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:02:01.208Z,1520701321.208 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:02:01.604Z,1520701321.604 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:02:02.026Z,1520701322.026 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:02:02.431Z,1520701322.431 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:02:02.830Z,1520701322.830 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:02:03.219Z,1520701323.219 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:02:03.616Z,1520701323.616 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:02:04.009Z,1520701324.009 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:02:04.409Z,1520701324.409 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:02:04.817Z,1520701324.817 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:02:05.208Z,1520701325.208 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:02:05.621Z,1520701325.621 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:02:06.015Z,1520701326.015 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:02:06.413Z,1520701326.413 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:02:06.814Z,1520701326.814 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:02:07.219Z,1520701327.219 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:02:07.619Z,1520701327.619 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:02:08.019Z,1520701328.019 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:02:08.431Z,1520701328.431 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:02:08.817Z,1520701328.817 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:02:09.218Z,1520701329.218 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:02:09.616Z,1520701329.616 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:02:10.013Z,1520701330.013 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:02:10.410Z,1520701330.410 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:02:10.829Z,1520701330.829 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:02:11.209Z,1520701331.209 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:02:11.628Z,1520701331.628 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:02:12.038Z,1520701332.038 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:02:12.433Z,1520701332.433 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:02:12.809Z,1520701332.809 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:02:13.209Z,1520701333.209 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:02:13.612Z,1520701333.612 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:02:14.013Z,1520701334.013 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:02:14.408Z,1520701334.408 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:02:14.812Z,1520701334.812 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:02:15.217Z,1520701335.217 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:02:15.613Z,1520701335.613 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:02:16.016Z,1520701336.016 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:02:16.414Z,1520701336.414 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:02:16.817Z,1520701336.817 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:02:17.218Z,1520701337.218 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:02:17.621Z,1520701337.621 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:02:18.020Z,1520701338.020 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:02:18.427Z,1520701338.427 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:02:18.825Z,1520701338.825 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:02:19.230Z,1520701339.230 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:02:19.610Z,1520701339.610 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:02:20.014Z,1520701340.014 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:02:20.409Z,1520701340.409 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:02:20.833Z,1520701340.833 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:02:21.232Z,1520701341.232 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:02:21.609Z,1520701341.609 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:02:22.009Z,1520701342.009 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:02:22.413Z,1520701342.413 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:02:22.808Z,1520701342.808 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:02:23.229Z,1520701343.229 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:02:23.609Z,1520701343.609 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:02:24.009Z,1520701344.009 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:02:24.430Z,1520701344.430 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:02:24.829Z,1520701344.829 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:02:25.208Z,1520701345.208 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:02:25.608Z,1520701345.608 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:02:26.009Z,1520701346.009 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:02:26.408Z,1520701346.408 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:02:26.809Z,1520701346.809 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:02:27.212Z,1520701347.212 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:02:27.608Z,1520701347.608 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:02:30.970Z,1520701350.970 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:02:31.104Z,1520701351.104 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:02:31.469Z,1520701351.469 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:02:31.869Z,1520701351.869 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:02:32.273Z,1520701352.273 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:02:32.670Z,1520701352.670 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:02:33.069Z,1520701353.069 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:02:33.469Z,1520701353.469 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:02:33.879Z,1520701353.879 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:02:34.279Z,1520701354.279 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:02:34.665Z,1520701354.665 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:02:35.061Z,1520701355.061 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:02:35.464Z,1520701355.464 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:02:35.861Z,1520701355.861 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:02:36.260Z,1520701356.260 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:02:36.669Z,1520701356.669 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:02:37.073Z,1520701357.073 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:02:37.466Z,1520701357.466 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:02:37.869Z,1520701357.869 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:02:38.275Z,1520701358.275 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:02:38.683Z,1520701358.683 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:02:39.073Z,1520701359.073 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:02:39.462Z,1520701359.462 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:02:39.866Z,1520701359.866 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:02:40.269Z,1520701360.269 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:02:40.667Z,1520701360.667 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:02:41.073Z,1520701361.073 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:02:41.474Z,1520701361.474 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:02:41.861Z,1520701361.861 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:02:42.261Z,1520701362.261 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:02:42.685Z,1520701362.685 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:02:43.080Z,1520701363.080 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:02:43.481Z,1520701363.481 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:02:43.881Z,1520701363.881 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:02:44.262Z,1520701364.262 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:02:44.661Z,1520701364.661 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:02:45.067Z,1520701365.067 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:02:45.466Z,1520701365.466 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:02:45.870Z,1520701365.870 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:02:46.268Z,1520701366.268 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:02:46.671Z,1520701366.671 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:02:47.068Z,1520701367.068 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:02:47.477Z,1520701367.477 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:02:47.877Z,1520701367.877 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:02:48.284Z,1520701368.284 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:02:48.671Z,1520701368.671 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:02:49.065Z,1520701369.065 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:02:49.469Z,1520701369.469 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:02:49.865Z,1520701369.865 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:02:50.270Z,1520701370.270 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:02:50.669Z,1520701370.669 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:02:51.067Z,1520701371.067 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:02:51.461Z,1520701371.461 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:02:51.873Z,1520701371.873 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:02:52.269Z,1520701372.269 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:02:52.679Z,1520701372.679 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:02:53.083Z,1520701373.083 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:02:53.483Z,1520701373.483 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:02:53.885Z,1520701373.885 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:02:54.269Z,1520701374.269 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:02:54.669Z,1520701374.669 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:02:55.057Z,1520701375.057 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:02:55.466Z,1520701375.466 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:02:55.870Z,1520701375.870 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:02:56.260Z,1520701376.260 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:02:56.668Z,1520701376.668 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:02:57.064Z,1520701377.064 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:02:57.468Z,1520701377.468 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:02:57.876Z,1520701377.876 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:02:58.273Z,1520701378.273 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:02:58.664Z,1520701378.664 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:02:59.061Z,1520701379.061 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:02:59.461Z,1520701379.461 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:02:59.865Z,1520701379.865 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:03:00.261Z,1520701380.261 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:03:00.661Z,1520701380.661 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:03:01.061Z,1520701381.061 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:03:01.461Z,1520701381.461 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:03:01.861Z,1520701381.861 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:03:02.280Z,1520701382.280 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:03:02.680Z,1520701382.680 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:03:03.073Z,1520701383.073 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:03:03.469Z,1520701383.469 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:03:03.869Z,1520701383.869 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:03:04.265Z,1520701384.265 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:03:04.666Z,1520701384.666 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:03:05.066Z,1520701385.066 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:03:05.473Z,1520701385.473 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:03:05.869Z,1520701385.869 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:03:06.281Z,1520701386.281 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:03:06.673Z,1520701386.673 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:03:07.075Z,1520701387.075 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:03:07.461Z,1520701387.461 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:03:07.860Z,1520701387.860 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:03:08.258Z,1520701388.258 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:03:08.672Z,1520701388.672 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:03:09.069Z,1520701389.069 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:03:09.470Z,1520701389.470 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:03:09.871Z,1520701389.871 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:03:10.266Z,1520701390.266 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:03:10.680Z,1520701390.680 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:03:11.080Z,1520701391.080 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:03:11.480Z,1520701391.480 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:03:11.876Z,1520701391.876 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:03:12.270Z,1520701392.270 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:03:12.668Z,1520701392.668 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:03:13.060Z,1520701393.060 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:03:13.478Z,1520701393.478 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:03:13.861Z,1520701393.861 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:03:14.257Z,1520701394.257 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:03:14.660Z,1520701394.660 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:03:15.060Z,1520701395.060 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:03:15.471Z,1520701395.471 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:03:15.884Z,1520701395.884 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:03:16.286Z,1520701396.286 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:03:16.676Z,1520701396.676 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:03:17.068Z,1520701397.068 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:03:17.469Z,1520701397.469 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:03:17.868Z,1520701397.868 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:03:18.268Z,1520701398.268 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:03:18.667Z,1520701398.667 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:03:19.064Z,1520701399.064 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:03:19.467Z,1520701399.467 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:03:19.865Z,1520701399.865 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:03:20.262Z,1520701400.262 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:03:20.691Z,1520701400.691 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:03:21.080Z,1520701401.080 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:03:21.460Z,1520701401.460 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:03:21.867Z,1520701401.867 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:03:22.261Z,1520701402.261 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:03:22.661Z,1520701402.661 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:03:23.061Z,1520701403.061 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:03:23.465Z,1520701403.465 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:03:23.876Z,1520701403.876 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:03:24.276Z,1520701404.276 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:03:24.666Z,1520701404.666 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:03:25.061Z,1520701405.061 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:03:25.469Z,1520701405.469 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:03:25.872Z,1520701405.872 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:03:26.275Z,1520701406.275 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:03:26.660Z,1520701406.660 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:03:27.079Z,1520701407.079 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:03:27.474Z,1520701407.474 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:03:27.877Z,1520701407.877 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:03:31.158Z,1520701411.158 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:03:31.288Z,1520701411.288 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:03:31.644Z,1520701411.644 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:03:32.042Z,1520701412.042 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:03:32.054Z,1520701412.054 [BPC1](ERROR): Failed to receive battery data
2018-03-10T17:03:32.054Z,1520701412.054 [BPC1] Communications Fault, FailCount= 1
2018-03-10T17:03:32.054Z,1520701412.054 [BPC1](ERROR): Communications Fault
2018-03-10T17:03:32.110Z,1520701412.110 [CBIT](ERROR): Communications Fault in component: BPC1
2018-03-10T17:03:32.451Z,1520701412.451 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:03:32.859Z,1520701412.859 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:03:33.249Z,1520701413.249 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:03:33.278Z,1520701413.278 [CBIT](INFO): Clearing failed state for component BPC1
2018-03-10T17:03:33.278Z,1520701413.278 [BPC1] No Fault, FailCount= 1
2018-03-10T17:03:33.641Z,1520701413.641 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:03:34.045Z,1520701414.045 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:03:34.451Z,1520701414.451 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:03:34.845Z,1520701414.845 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:03:35.255Z,1520701415.255 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:03:35.645Z,1520701415.645 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:03:36.045Z,1520701416.045 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:03:36.454Z,1520701416.454 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:03:36.860Z,1520701416.860 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:03:37.258Z,1520701417.258 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:03:37.641Z,1520701417.641 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:03:38.032Z,1520701418.032 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:03:38.437Z,1520701418.437 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:03:38.836Z,1520701418.836 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:03:39.245Z,1520701419.245 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:03:39.634Z,1520701419.634 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:03:40.043Z,1520701420.043 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:03:40.445Z,1520701420.445 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:03:40.840Z,1520701420.840 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:03:41.264Z,1520701421.264 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:03:41.667Z,1520701421.667 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:03:42.050Z,1520701422.050 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:03:42.443Z,1520701422.443 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:03:42.847Z,1520701422.847 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:03:43.234Z,1520701423.234 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:03:43.657Z,1520701423.657 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:03:44.037Z,1520701424.037 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:03:44.447Z,1520701424.447 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:03:44.837Z,1520701424.837 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:03:45.263Z,1520701425.263 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:03:45.638Z,1520701425.638 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:03:46.036Z,1520701426.036 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:03:46.456Z,1520701426.456 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:03:46.849Z,1520701426.849 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:03:47.238Z,1520701427.238 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:03:47.642Z,1520701427.642 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:03:48.042Z,1520701428.042 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:03:48.447Z,1520701428.447 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:03:48.854Z,1520701428.854 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:03:49.247Z,1520701429.247 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:03:49.649Z,1520701429.649 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:03:50.038Z,1520701430.038 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:03:50.433Z,1520701430.433 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:03:50.860Z,1520701430.860 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:03:51.237Z,1520701431.237 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:03:51.635Z,1520701431.635 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:03:52.036Z,1520701432.036 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:03:52.432Z,1520701432.432 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:03:52.834Z,1520701432.834 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:03:53.236Z,1520701433.236 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:03:53.641Z,1520701433.641 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:03:54.033Z,1520701434.033 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:03:54.452Z,1520701434.452 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:03:54.841Z,1520701434.841 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:03:55.238Z,1520701435.238 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:03:55.646Z,1520701435.646 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:03:56.041Z,1520701436.041 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:03:56.442Z,1520701436.442 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:03:56.842Z,1520701436.842 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:03:57.245Z,1520701437.245 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:03:57.641Z,1520701437.641 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:03:58.042Z,1520701438.042 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:03:58.450Z,1520701438.450 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:03:58.834Z,1520701438.834 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:03:59.235Z,1520701439.235 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:03:59.632Z,1520701439.632 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:04:00.037Z,1520701440.037 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:04:00.436Z,1520701440.436 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:04:00.857Z,1520701440.857 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:04:01.234Z,1520701441.234 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:04:01.656Z,1520701441.656 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:04:02.057Z,1520701442.057 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:04:02.441Z,1520701442.441 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:04:02.837Z,1520701442.837 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:04:03.237Z,1520701443.237 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:04:03.631Z,1520701443.631 [NAL9602](INFO): SBD MO Status=2, MOMSN=5836, MT Status=2, MTMSN=0
2018-03-10T17:04:03.631Z,1520701443.631 [NAL9602](ERROR): Failed to initiate SBD session. Error code: 2
2018-03-10T17:04:03.663Z,1520701443.663 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:04:04.059Z,1520701444.059 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:04:04.068Z,1520701444.068 [BPC1](FAULT): Failed to initialize
2018-03-10T17:04:04.068Z,1520701444.068 [BPC1] Communications Fault, FailCount= 2
2018-03-10T17:04:04.068Z,1520701444.068 [BPC1](ERROR): Communications Fault
2018-03-10T17:04:04.090Z,1520701444.090 [CBIT](ERROR): Communications Fault in component: BPC1
2018-03-10T17:04:04.437Z,1520701444.437 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:04:04.834Z,1520701444.834 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:04:05.237Z,1520701445.237 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:04:05.292Z,1520701445.292 [CBIT](INFO): Clearing failed state for component BPC1
2018-03-10T17:04:05.292Z,1520701445.292 [BPC1] No Fault, FailCount= 2
2018-03-10T17:04:05.645Z,1520701445.645 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:04:06.037Z,1520701446.037 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:04:06.444Z,1520701446.444 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:04:06.849Z,1520701446.849 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:04:07.244Z,1520701447.244 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:04:07.644Z,1520701447.644 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:04:08.046Z,1520701448.046 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:04:08.450Z,1520701448.450 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:04:08.854Z,1520701448.854 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:04:09.259Z,1520701449.259 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:04:09.652Z,1520701449.652 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:04:10.037Z,1520701450.037 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:04:10.441Z,1520701450.441 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:04:10.833Z,1520701450.833 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:04:11.236Z,1520701451.236 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:04:11.637Z,1520701451.637 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:04:12.041Z,1520701452.041 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:04:12.444Z,1520701452.444 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:04:12.837Z,1520701452.837 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:04:13.248Z,1520701453.248 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:04:13.647Z,1520701453.648 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:04:14.041Z,1520701454.041 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:04:14.437Z,1520701454.437 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:04:14.841Z,1520701454.841 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:04:15.241Z,1520701455.241 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:04:15.655Z,1520701455.655 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:04:16.118Z,1520701456.118 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:04:16.456Z,1520701456.456 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:04:16.852Z,1520701456.852 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:04:17.236Z,1520701457.236 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:04:17.639Z,1520701457.639 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:04:18.034Z,1520701458.034 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:04:18.438Z,1520701458.438 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:04:18.873Z,1520701458.873 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:04:19.237Z,1520701459.237 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:04:19.638Z,1520701459.638 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:04:20.043Z,1520701460.043 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:04:20.438Z,1520701460.438 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:04:20.876Z,1520701460.876 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:04:21.244Z,1520701461.244 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:04:21.640Z,1520701461.640 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:04:22.045Z,1520701462.045 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:04:22.446Z,1520701462.446 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:04:22.834Z,1520701462.834 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:04:23.244Z,1520701463.244 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:04:23.645Z,1520701463.645 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:04:24.039Z,1520701464.039 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:04:24.452Z,1520701464.452 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:04:24.852Z,1520701464.852 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:04:25.254Z,1520701465.254 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:04:25.655Z,1520701465.655 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:04:26.037Z,1520701466.037 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:04:26.433Z,1520701466.433 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:04:26.855Z,1520701466.855 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:04:27.237Z,1520701467.237 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:04:27.274Z,1520701467.274 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-03-10T16:59:27.3Z
2018-03-10T17:04:27.274Z,1520701467.274 [Default:CheckIn:Read_GPS] Stopped
2018-03-10T17:04:27.274Z,1520701467.274 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-03-10T17:04:27.633Z,1520701467.633 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:04:28.190Z,1520701468.190 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:04:31.201Z,1520701471.201 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:04:31.336Z,1520701471.336 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:04:31.651Z,1520701471.651 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20180310T051512/Courier0276.lzma
2018-03-10T17:04:31.684Z,1520701471.684 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:04:32.077Z,1520701472.077 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:04:32.449Z,1520701472.449 [DataOverHttps](INFO): Moved sent file to Logs/20180310T051512/Courier0276.lzma.bak
2018-03-10T17:04:32.450Z,1520701472.450 [DataOverHttps](INFO): SBD MOMSN=8006395
2018-03-10T17:04:32.485Z,1520701472.485 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:04:34.135Z,1520701474.135 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:04:34.153Z,1520701474.153 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T17:04:34.153Z,1520701474.153 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 158
2018-03-10T17:04:34.154Z,1520701474.154 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-10T17:04:34.207Z,1520701474.207 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-10T17:04:34.285Z,1520701474.285 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:04:34.344Z,1520701474.344 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-10T17:04:34.344Z,1520701474.344 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 158
2018-03-10T17:04:34.656Z,1520701474.656 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:04:34.693Z,1520701474.693 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-10T17:04:34.693Z,1520701474.693 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-10T17:04:34.694Z,1520701474.694 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-10T17:04:35.056Z,1520701475.056 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:04:35.449Z,1520701475.449 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:04:35.848Z,1520701475.848 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:04:35.860Z,1520701475.860 [BPC1](FAULT): Failed to initialize
2018-03-10T17:04:35.860Z,1520701475.860 [BPC1] Communications Fault, FailCount= 3
2018-03-10T17:04:35.860Z,1520701475.860 [BPC1](ERROR): Communications Fault
2018-03-10T17:04:35.903Z,1520701475.903 [CBIT](ERROR): Communications Fault in component: BPC1
2018-03-10T17:04:36.250Z,1520701476.250 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:04:39.457Z,1520701479.457 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:04:39.586Z,1520701479.586 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:04:39.629Z,1520701479.629 [CBIT](INFO): Clearing failed state for component BPC1
2018-03-10T17:04:39.629Z,1520701479.629 [BPC1] No Fault, FailCount= 3
2018-03-10T17:04:39.969Z,1520701479.969 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:04:40.360Z,1520701480.360 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:04:40.737Z,1520701480.737 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:04:41.144Z,1520701481.144 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:04:41.572Z,1520701481.572 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:04:44.688Z,1520701484.688 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:04:44.810Z,1520701484.810 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:04:45.164Z,1520701485.164 [DataOverHttps](INFO): Sending 288 bytes from file Logs/20180310T051512/Express0277.lzma
2018-03-10T17:04:45.172Z,1520701485.172 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session.
2018-03-10T17:04:45.188Z,1520701485.188 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:04:45.588Z,1520701485.588 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:04:45.953Z,1520701485.953 [DataOverHttps](INFO): Moved sent file to Logs/20180310T051512/Express0277.lzma.bak
2018-03-10T17:04:45.954Z,1520701485.954 [DataOverHttps](INFO): SBD MOMSN=8006397
2018-03-10T17:04:45.992Z,1520701485.992 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:04:46.669Z,1520701486.669 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:04:46.689Z,1520701486.689 [Default:CheckIn:Read_Iridium] Stopped
2018-03-10T17:04:46.689Z,1520701486.689 [Default:CheckIn:C.Wait] Running Loop=1
2018-03-10T17:04:46.689Z,1520701486.689 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-03-10T17:04:46.779Z,1520701486.779 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:04:47.182Z,1520701487.182 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:04:50.381Z,1520701490.381 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:04:50.494Z,1520701490.494 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:04:50.854Z,1520701490.854 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:04:51.243Z,1520701491.243 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:04:51.661Z,1520701491.661 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:04:52.051Z,1520701492.051 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:04:52.452Z,1520701492.452 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:04:52.857Z,1520701492.857 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:04:53.255Z,1520701493.255 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:04:53.653Z,1520701493.653 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:04:54.050Z,1520701494.050 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:04:54.456Z,1520701494.456 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:04:54.849Z,1520701494.849 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:04:55.257Z,1520701495.257 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:04:55.652Z,1520701495.652 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:04:56.054Z,1520701496.054 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:04:56.456Z,1520701496.456 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:04:56.869Z,1520701496.869 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:04:57.253Z,1520701497.253 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:04:57.653Z,1520701497.653 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:04:58.052Z,1520701498.052 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:04:58.446Z,1520701498.446 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:04:58.854Z,1520701498.854 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:04:59.262Z,1520701499.262 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:04:59.663Z,1520701499.663 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:05:00.041Z,1520701500.041 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:05:00.464Z,1520701500.464 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:05:00.844Z,1520701500.844 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:05:01.238Z,1520701501.238 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:05:01.644Z,1520701501.644 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:05:02.049Z,1520701502.049 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:05:02.452Z,1520701502.452 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:05:02.852Z,1520701502.852 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:05:03.253Z,1520701503.253 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:05:03.653Z,1520701503.653 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:05:04.050Z,1520701504.050 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:05:04.455Z,1520701504.455 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:05:04.850Z,1520701504.850 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:05:05.261Z,1520701505.261 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:05:05.647Z,1520701505.647 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:05:06.048Z,1520701506.048 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:05:06.462Z,1520701506.462 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:05:06.847Z,1520701506.847 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:05:07.238Z,1520701507.238 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:05:07.652Z,1520701507.652 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:05:08.056Z,1520701508.056 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:05:08.441Z,1520701508.441 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:05:08.848Z,1520701508.848 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:05:09.240Z,1520701509.240 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:05:09.652Z,1520701509.652 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:05:10.048Z,1520701510.048 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:05:10.064Z,1520701510.064 [BPC1](FAULT): Failed to initialize
2018-03-10T17:05:10.064Z,1520701510.064 [BPC1] Communications Fault, FailCount= 4
2018-03-10T17:05:10.064Z,1520701510.064 [BPC1](ERROR): Communications Fault
2018-03-10T17:05:10.119Z,1520701510.119 [CBIT](ERROR): Communications Fault in component: BPC1
2018-03-10T17:05:10.448Z,1520701510.448 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:05:10.842Z,1520701510.842 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:05:11.244Z,1520701511.244 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:05:11.292Z,1520701511.292 [CBIT](INFO): Clearing failed state for component BPC1
2018-03-10T17:05:11.292Z,1520701511.292 [BPC1] No Fault, FailCount= 4
2018-03-10T17:05:11.644Z,1520701511.644 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:05:12.040Z,1520701512.040 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:05:12.448Z,1520701512.448 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:05:12.840Z,1520701512.840 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:05:13.238Z,1520701513.238 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:05:13.644Z,1520701513.644 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:05:14.045Z,1520701514.045 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:05:14.452Z,1520701514.452 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:05:14.852Z,1520701514.852 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:05:15.253Z,1520701515.253 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:05:15.637Z,1520701515.637 [NAL9602](INFO): Powering down
2018-03-10T17:05:15.655Z,1520701515.655 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:05:16.060Z,1520701516.060 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:05:16.455Z,1520701516.455 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:05:16.849Z,1520701516.849 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:05:17.248Z,1520701517.248 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:05:17.652Z,1520701517.652 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:05:18.052Z,1520701518.052 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:05:18.463Z,1520701518.463 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:05:18.852Z,1520701518.852 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:05:19.248Z,1520701519.248 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:05:19.661Z,1520701519.661 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:05:20.041Z,1520701520.041 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:05:20.440Z,1520701520.440 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:05:20.856Z,1520701520.856 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:05:21.253Z,1520701521.253 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:05:21.656Z,1520701521.656 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:05:22.048Z,1520701522.048 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:05:22.456Z,1520701522.456 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:05:22.840Z,1520701522.840 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:05:23.266Z,1520701523.266 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:05:23.644Z,1520701523.644 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:05:24.040Z,1520701524.040 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:05:24.464Z,1520701524.464 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:05:24.840Z,1520701524.840 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:05:25.238Z,1520701525.238 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:05:25.644Z,1520701525.644 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:05:26.044Z,1520701526.044 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:05:26.448Z,1520701526.448 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:05:26.844Z,1520701526.844 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:05:27.241Z,1520701527.241 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:05:27.645Z,1520701527.645 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:05:28.046Z,1520701528.046 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:05:28.445Z,1520701528.445 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:05:28.844Z,1520701528.844 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:05:29.245Z,1520701529.245 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:05:29.640Z,1520701529.640 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:05:30.040Z,1520701530.040 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:05:30.448Z,1520701530.448 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:05:30.844Z,1520701530.844 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:05:31.240Z,1520701531.240 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:05:31.644Z,1520701531.644 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:05:32.044Z,1520701532.044 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:05:32.440Z,1520701532.440 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:05:32.844Z,1520701532.844 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:05:33.248Z,1520701533.248 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:05:33.651Z,1520701533.651 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:05:34.050Z,1520701534.050 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:05:34.450Z,1520701534.450 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:05:34.858Z,1520701534.858 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:05:35.257Z,1520701535.257 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:05:35.656Z,1520701535.656 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:05:36.053Z,1520701536.053 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:05:36.450Z,1520701536.450 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:05:36.847Z,1520701536.847 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:05:37.253Z,1520701537.253 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:05:37.645Z,1520701537.645 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:05:38.040Z,1520701538.040 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:05:38.440Z,1520701538.440 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:05:38.856Z,1520701538.856 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:05:39.240Z,1520701539.240 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:05:39.648Z,1520701539.648 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:05:40.044Z,1520701540.044 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:05:40.476Z,1520701540.476 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:05:40.854Z,1520701540.854 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:05:41.261Z,1520701541.261 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:05:41.654Z,1520701541.654 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:05:42.053Z,1520701542.053 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:05:42.463Z,1520701542.463 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:05:42.525Z,1520701542.525 [CBIT](DEBUG): EFC running - data check-sum false
2018-03-10T17:05:42.846Z,1520701542.846 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:05:43.244Z,1520701543.244 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:05:43.664Z,1520701543.664 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:05:44.051Z,1520701544.051 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:05:44.452Z,1520701544.452 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:05:44.856Z,1520701544.856 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:05:45.251Z,1520701545.251 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:05:45.652Z,1520701545.652 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:05:46.061Z,1520701546.061 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:05:46.463Z,1520701546.463 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:05:46.865Z,1520701546.865 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:05:47.271Z,1520701547.271 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:05:51.481Z,1520701551.481 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:05:51.677Z,1520701551.677 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:05:52.035Z,1520701552.035 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:05:52.430Z,1520701552.430 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:05:52.832Z,1520701552.832 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:05:53.231Z,1520701553.231 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:05:53.632Z,1520701553.632 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:05:54.024Z,1520701554.024 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:05:54.428Z,1520701554.428 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:05:54.836Z,1520701554.836 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:05:55.224Z,1520701555.224 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:05:55.628Z,1520701555.628 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:05:56.025Z,1520701556.025 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:05:56.424Z,1520701556.424 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:05:56.838Z,1520701556.838 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:05:57.240Z,1520701557.240 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:05:57.629Z,1520701557.629 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:05:58.027Z,1520701558.027 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:05:58.440Z,1520701558.440 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:05:58.828Z,1520701558.828 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:05:59.240Z,1520701559.240 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:05:59.634Z,1520701559.634 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:06:00.015Z,1520701560.015 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:06:00.428Z,1520701560.428 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:06:00.837Z,1520701560.837 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:06:01.232Z,1520701561.232 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:06:01.620Z,1520701561.620 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:06:02.033Z,1520701562.033 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:06:02.420Z,1520701562.420 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:06:02.820Z,1520701562.820 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:06:03.241Z,1520701563.241 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:06:03.620Z,1520701563.620 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:06:04.036Z,1520701564.036 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:06:04.441Z,1520701564.441 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:06:04.821Z,1520701564.821 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:06:05.221Z,1520701565.221 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:06:05.625Z,1520701565.625 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:06:06.025Z,1520701566.025 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:06:06.429Z,1520701566.429 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:06:06.822Z,1520701566.822 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:06:07.228Z,1520701567.228 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:06:07.625Z,1520701567.625 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:06:08.026Z,1520701568.026 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:06:08.429Z,1520701568.429 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:06:08.834Z,1520701568.834 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:06:09.233Z,1520701569.233 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:06:09.629Z,1520701569.629 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:06:10.029Z,1520701570.029 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:06:10.428Z,1520701570.428 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:06:10.828Z,1520701570.828 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:06:11.241Z,1520701571.241 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:06:11.624Z,1520701571.624 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:06:12.016Z,1520701572.016 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:06:12.420Z,1520701572.420 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:06:12.832Z,1520701572.832 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:06:13.216Z,1520701573.216 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:06:13.620Z,1520701573.620 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:06:14.024Z,1520701574.024 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:06:14.419Z,1520701574.419 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:06:14.820Z,1520701574.820 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:06:15.226Z,1520701575.226 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:06:15.628Z,1520701575.628 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:06:16.022Z,1520701576.022 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:06:16.425Z,1520701576.425 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:06:16.844Z,1520701576.844 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:06:17.229Z,1520701577.229 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:06:17.625Z,1520701577.625 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:06:18.029Z,1520701578.029 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:06:18.436Z,1520701578.436 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:06:18.830Z,1520701578.830 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:06:19.231Z,1520701579.231 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:06:19.628Z,1520701579.628 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:06:20.020Z,1520701580.020 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:06:20.424Z,1520701580.424 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:06:20.828Z,1520701580.828 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:06:21.224Z,1520701581.224 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:06:21.628Z,1520701581.628 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:06:22.027Z,1520701582.027 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:06:22.428Z,1520701582.428 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:06:22.829Z,1520701582.829 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:06:23.228Z,1520701583.228 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:06:23.628Z,1520701583.628 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:06:24.029Z,1520701584.029 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:06:24.428Z,1520701584.428 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:06:24.823Z,1520701584.823 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:06:25.232Z,1520701585.232 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:06:25.636Z,1520701585.636 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:06:26.033Z,1520701586.033 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:06:26.441Z,1520701586.441 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:06:26.822Z,1520701586.822 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:06:27.222Z,1520701587.222 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:06:27.622Z,1520701587.622 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:06:28.022Z,1520701588.022 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:06:28.423Z,1520701588.423 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:06:28.848Z,1520701588.848 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:06:29.230Z,1520701589.230 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:06:29.630Z,1520701589.630 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:06:30.022Z,1520701590.022 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:06:30.422Z,1520701590.422 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:06:30.831Z,1520701590.831 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:06:31.233Z,1520701591.233 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:06:31.630Z,1520701591.630 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:06:32.022Z,1520701592.022 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:06:32.420Z,1520701592.420 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:06:32.820Z,1520701592.820 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:06:33.221Z,1520701593.221 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:06:33.640Z,1520701593.640 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:06:34.020Z,1520701594.020 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:06:34.420Z,1520701594.420 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:06:34.824Z,1520701594.824 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:06:35.221Z,1520701595.221 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:06:35.628Z,1520701595.628 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:06:36.025Z,1520701596.025 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:06:36.429Z,1520701596.429 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:06:36.827Z,1520701596.827 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:06:37.229Z,1520701597.229 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:06:37.626Z,1520701597.626 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:06:38.029Z,1520701598.029 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:06:38.429Z,1520701598.429 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:06:38.826Z,1520701598.826 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:06:39.226Z,1520701599.226 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:06:39.628Z,1520701599.628 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:06:40.033Z,1520701600.033 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:06:40.420Z,1520701600.420 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:06:40.820Z,1520701600.820 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:06:41.220Z,1520701601.220 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:06:41.620Z,1520701601.620 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:06:42.020Z,1520701602.020 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:06:42.420Z,1520701602.420 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:06:42.821Z,1520701602.821 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:06:43.220Z,1520701603.220 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:06:43.620Z,1520701603.620 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:06:44.041Z,1520701604.041 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:06:44.425Z,1520701604.425 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:06:44.822Z,1520701604.822 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:06:45.221Z,1520701605.221 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:06:45.629Z,1520701605.629 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:06:46.029Z,1520701606.029 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:06:46.425Z,1520701606.425 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:06:46.825Z,1520701606.825 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:06:47.228Z,1520701607.228 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:06:47.628Z,1520701607.628 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:06:50.890Z,1520701610.890 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:06:51.028Z,1520701611.028 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:06:51.378Z,1520701611.378 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:06:51.785Z,1520701611.785 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:06:52.188Z,1520701612.188 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:06:52.579Z,1520701612.579 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:06:52.983Z,1520701612.983 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:06:53.384Z,1520701613.384 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:06:53.772Z,1520701613.772 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:06:54.176Z,1520701614.176 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:06:54.578Z,1520701614.578 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:06:54.972Z,1520701614.972 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:06:55.372Z,1520701615.372 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:06:55.769Z,1520701615.769 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:06:56.175Z,1520701616.175 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:06:56.572Z,1520701616.572 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:06:56.968Z,1520701616.968 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:06:57.374Z,1520701617.374 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:06:57.778Z,1520701617.778 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:06:58.177Z,1520701618.177 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:06:58.576Z,1520701618.576 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:06:58.985Z,1520701618.985 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:06:59.385Z,1520701619.385 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:06:59.779Z,1520701619.779 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:07:00.178Z,1520701620.178 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:07:00.588Z,1520701620.588 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:07:00.979Z,1520701620.979 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:07:01.381Z,1520701621.381 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:07:01.788Z,1520701621.788 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:07:02.185Z,1520701622.185 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:07:02.574Z,1520701622.574 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:07:02.971Z,1520701622.971 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:07:03.372Z,1520701623.372 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:07:03.778Z,1520701623.778 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:07:04.170Z,1520701624.170 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:07:04.572Z,1520701624.572 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:07:04.968Z,1520701624.968 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:07:05.374Z,1520701625.374 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:07:05.776Z,1520701625.776 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:07:06.168Z,1520701626.168 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:07:06.577Z,1520701626.577 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:07:06.974Z,1520701626.974 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:07:07.378Z,1520701627.378 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:07:07.772Z,1520701627.772 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:07:08.172Z,1520701628.172 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:07:08.578Z,1520701628.578 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:07:08.975Z,1520701628.975 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:07:09.400Z,1520701629.400 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:07:09.777Z,1520701629.777 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:07:10.173Z,1520701630.173 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:07:10.576Z,1520701630.576 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:07:10.976Z,1520701630.976 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:07:11.368Z,1520701631.368 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:07:11.774Z,1520701631.774 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:07:12.178Z,1520701632.178 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:07:12.590Z,1520701632.590 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:07:12.978Z,1520701632.978 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:07:13.382Z,1520701633.382 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:07:13.781Z,1520701633.781 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:07:14.189Z,1520701634.189 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:07:14.582Z,1520701634.582 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:07:14.987Z,1520701634.987 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:07:15.382Z,1520701635.382 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:07:15.779Z,1520701635.779 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:07:16.182Z,1520701636.182 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:07:16.583Z,1520701636.583 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:07:16.985Z,1520701636.985 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:07:17.386Z,1520701637.386 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:07:17.787Z,1520701637.787 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:07:18.176Z,1520701638.175 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:07:18.575Z,1520701638.575 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:07:18.972Z,1520701638.972 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:07:19.368Z,1520701639.368 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:07:19.788Z,1520701639.788 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:07:20.175Z,1520701640.175 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:07:20.572Z,1520701640.572 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:07:20.995Z,1520701640.995 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:07:21.374Z,1520701641.374 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:07:21.775Z,1520701641.775 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:07:22.196Z,1520701642.196 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:07:22.572Z,1520701642.572 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:07:22.974Z,1520701642.974 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:07:23.375Z,1520701643.375 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:07:23.775Z,1520701643.775 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:07:24.173Z,1520701644.173 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:07:24.579Z,1520701644.579 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:07:24.976Z,1520701644.976 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:07:25.377Z,1520701645.377 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:07:25.778Z,1520701645.778 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:07:26.192Z,1520701646.192 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:07:26.570Z,1520701646.570 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:07:26.985Z,1520701646.985 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:07:27.372Z,1520701647.372 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:07:27.774Z,1520701647.774 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:07:28.175Z,1520701648.175 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:07:28.583Z,1520701648.583 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:07:28.983Z,1520701648.983 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:07:29.379Z,1520701649.379 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:07:29.781Z,1520701649.781 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:07:30.180Z,1520701650.180 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:07:30.582Z,1520701650.582 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:07:30.984Z,1520701650.984 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:07:31.378Z,1520701651.378 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:07:31.778Z,1520701651.778 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:07:32.187Z,1520701652.187 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:07:32.579Z,1520701652.579 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:07:32.982Z,1520701652.982 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:07:33.382Z,1520701653.382 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:07:33.785Z,1520701653.785 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:07:34.188Z,1520701654.188 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:07:34.594Z,1520701654.594 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:07:34.972Z,1520701654.972 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:07:35.008Z,1520701655.008 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T17:07:35.008Z,1520701655.008 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 159
2018-03-10T17:07:35.008Z,1520701655.008 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-10T17:07:35.021Z,1520701655.021 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-10T17:07:35.373Z,1520701655.373 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:07:35.426Z,1520701655.426 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-10T17:07:35.426Z,1520701655.426 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 159
2018-03-10T17:07:35.797Z,1520701655.797 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:07:35.815Z,1520701655.815 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-10T17:07:35.815Z,1520701655.815 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-10T17:07:35.816Z,1520701655.816 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-10T17:07:36.170Z,1520701656.170 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:07:36.572Z,1520701656.572 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:07:36.973Z,1520701656.973 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:07:37.369Z,1520701657.369 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:07:37.778Z,1520701657.778 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:07:38.172Z,1520701658.172 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:07:38.582Z,1520701658.582 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:07:38.978Z,1520701658.978 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:07:39.378Z,1520701659.378 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:07:39.772Z,1520701659.772 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:07:40.172Z,1520701660.172 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:07:40.576Z,1520701660.576 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:07:40.975Z,1520701660.975 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:07:41.372Z,1520701661.372 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:07:41.772Z,1520701661.772 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:07:42.174Z,1520701662.174 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:07:42.578Z,1520701662.578 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:07:42.973Z,1520701662.973 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:07:43.384Z,1520701663.384 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:07:43.780Z,1520701663.780 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:07:44.184Z,1520701664.184 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:07:44.576Z,1520701664.576 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:07:44.982Z,1520701664.982 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:07:45.391Z,1520701665.391 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:07:45.781Z,1520701665.781 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:07:46.178Z,1520701666.178 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:07:46.579Z,1520701666.579 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:07:46.982Z,1520701666.982 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:07:47.376Z,1520701667.376 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:07:47.784Z,1520701667.784 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:07:50.952Z,1520701670.952 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:07:51.098Z,1520701671.098 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:07:51.474Z,1520701671.474 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:07:51.876Z,1520701671.876 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:07:52.275Z,1520701672.275 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:07:52.664Z,1520701672.664 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:07:53.072Z,1520701673.072 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:07:53.469Z,1520701673.469 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:07:53.870Z,1520701673.870 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:07:54.271Z,1520701674.271 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:07:54.672Z,1520701674.672 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:07:55.070Z,1520701675.070 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:07:55.473Z,1520701675.473 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:07:55.865Z,1520701675.865 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:07:56.272Z,1520701676.272 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:07:56.664Z,1520701676.664 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:07:57.072Z,1520701677.072 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:07:57.469Z,1520701677.469 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:07:57.873Z,1520701677.873 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:07:58.273Z,1520701678.273 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:07:58.669Z,1520701678.669 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:07:59.072Z,1520701679.072 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:07:59.472Z,1520701679.472 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:07:59.866Z,1520701679.866 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:08:00.273Z,1520701680.273 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:08:00.672Z,1520701680.672 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:08:01.064Z,1520701681.064 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:08:01.464Z,1520701681.464 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:08:01.864Z,1520701681.864 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:08:02.265Z,1520701682.265 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:08:02.664Z,1520701682.664 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:08:03.063Z,1520701683.063 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:08:03.467Z,1520701683.467 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:08:03.872Z,1520701683.872 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:08:04.269Z,1520701684.269 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:08:04.668Z,1520701684.668 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:08:05.068Z,1520701685.068 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:08:05.472Z,1520701685.472 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:08:05.876Z,1520701685.876 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:08:06.271Z,1520701686.271 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:08:06.672Z,1520701686.672 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:08:07.073Z,1520701687.073 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:08:07.472Z,1520701687.472 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:08:07.872Z,1520701687.872 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:08:08.264Z,1520701688.264 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:08:08.664Z,1520701688.664 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:08:09.062Z,1520701689.062 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:08:09.470Z,1520701689.470 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:08:09.871Z,1520701689.871 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:08:10.272Z,1520701690.272 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:08:10.670Z,1520701690.670 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:08:11.073Z,1520701691.073 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:08:11.468Z,1520701691.468 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:08:11.878Z,1520701691.878 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:08:12.265Z,1520701692.265 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:08:12.678Z,1520701692.678 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:08:13.065Z,1520701693.065 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:08:13.465Z,1520701693.465 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:08:13.878Z,1520701693.878 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:08:14.264Z,1520701694.264 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:08:14.663Z,1520701694.663 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:08:15.064Z,1520701695.064 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:08:15.464Z,1520701695.464 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:08:15.863Z,1520701695.863 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:08:16.264Z,1520701696.264 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:08:16.669Z,1520701696.669 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:08:17.073Z,1520701697.073 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:08:17.473Z,1520701697.473 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:08:17.872Z,1520701697.872 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:08:18.272Z,1520701698.272 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:08:18.672Z,1520701698.672 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:08:19.072Z,1520701699.072 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:08:19.468Z,1520701699.468 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:08:19.873Z,1520701699.873 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:08:20.268Z,1520701700.268 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:08:20.664Z,1520701700.664 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:08:21.062Z,1520701701.062 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:08:21.468Z,1520701701.468 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:08:21.864Z,1520701701.864 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:08:22.265Z,1520701702.265 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:08:22.669Z,1520701702.669 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:08:23.069Z,1520701703.069 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:08:23.471Z,1520701703.471 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:08:23.872Z,1520701703.872 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:08:24.269Z,1520701704.269 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:08:24.668Z,1520701704.668 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:08:25.071Z,1520701705.071 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:08:25.474Z,1520701705.474 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:08:25.866Z,1520701705.866 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:08:26.264Z,1520701706.264 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:08:26.676Z,1520701706.676 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:08:27.076Z,1520701707.076 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:08:27.464Z,1520701707.464 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:08:27.864Z,1520701707.864 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:08:28.265Z,1520701708.265 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:08:28.672Z,1520701708.672 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:08:29.064Z,1520701709.064 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:08:29.472Z,1520701709.472 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:08:29.868Z,1520701709.868 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:08:30.272Z,1520701710.272 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:08:30.671Z,1520701710.671 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:08:31.068Z,1520701711.068 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:08:31.472Z,1520701711.472 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:08:31.941Z,1520701711.941 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:08:32.276Z,1520701712.276 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:08:32.671Z,1520701712.671 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:08:33.080Z,1520701713.080 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:08:33.464Z,1520701713.464 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:08:33.864Z,1520701713.864 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:08:34.276Z,1520701714.276 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:08:34.664Z,1520701714.664 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:08:35.078Z,1520701715.078 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:08:35.476Z,1520701715.476 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:08:35.864Z,1520701715.864 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:08:36.273Z,1520701716.273 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:08:36.670Z,1520701716.670 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:08:37.064Z,1520701717.064 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:08:37.464Z,1520701717.464 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:08:37.881Z,1520701717.881 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:08:38.264Z,1520701718.264 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:08:38.668Z,1520701718.668 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:08:39.064Z,1520701719.064 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:08:39.469Z,1520701719.469 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:08:39.870Z,1520701719.870 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:08:40.265Z,1520701720.265 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:08:40.672Z,1520701720.672 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:08:41.073Z,1520701721.073 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:08:41.472Z,1520701721.472 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:08:41.877Z,1520701721.877 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:08:42.272Z,1520701722.272 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:08:42.673Z,1520701722.673 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:08:43.070Z,1520701723.070 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:08:43.480Z,1520701723.480 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:08:43.883Z,1520701723.883 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:08:44.271Z,1520701724.271 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:08:44.667Z,1520701724.667 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:08:45.064Z,1520701725.064 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:08:45.468Z,1520701725.468 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:08:45.881Z,1520701725.881 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:08:46.265Z,1520701726.265 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:08:46.664Z,1520701726.664 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:08:47.072Z,1520701727.072 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:08:47.468Z,1520701727.468 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:08:47.874Z,1520701727.874 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:08:51.182Z,1520701731.182 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:08:51.306Z,1520701731.306 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:08:51.688Z,1520701731.688 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:08:52.092Z,1520701732.092 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:08:52.493Z,1520701732.493 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:08:52.892Z,1520701732.892 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:08:53.292Z,1520701733.292 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:08:53.684Z,1520701733.684 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:08:54.091Z,1520701734.091 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:08:54.483Z,1520701734.483 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:08:54.885Z,1520701734.885 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:08:55.286Z,1520701735.286 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:08:55.683Z,1520701735.683 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:08:56.088Z,1520701736.088 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:08:56.487Z,1520701736.487 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:08:56.891Z,1520701736.891 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:08:57.289Z,1520701737.289 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:08:57.688Z,1520701737.688 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:08:58.089Z,1520701738.089 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:08:58.485Z,1520701738.485 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:08:58.888Z,1520701738.888 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:08:59.292Z,1520701739.292 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:08:59.692Z,1520701739.692 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:09:00.088Z,1520701740.088 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:09:00.488Z,1520701740.488 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:09:00.884Z,1520701740.884 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:09:01.284Z,1520701741.284 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:09:01.686Z,1520701741.686 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:09:02.093Z,1520701742.093 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:09:02.487Z,1520701742.487 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:09:02.883Z,1520701742.883 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:09:03.292Z,1520701743.292 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:09:03.679Z,1520701743.679 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:09:04.100Z,1520701744.100 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:09:04.492Z,1520701744.492 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:09:04.901Z,1520701744.901 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:09:05.300Z,1520701745.300 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:09:05.678Z,1520701745.678 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:09:06.080Z,1520701746.080 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:09:06.484Z,1520701746.484 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:09:06.876Z,1520701746.876 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:09:07.280Z,1520701747.280 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:09:07.688Z,1520701747.688 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:09:08.088Z,1520701748.088 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:09:08.488Z,1520701748.488 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:09:08.890Z,1520701748.890 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:09:09.285Z,1520701749.285 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:09:09.690Z,1520701749.690 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:09:10.088Z,1520701750.088 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:09:10.488Z,1520701750.488 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:09:10.892Z,1520701750.892 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:09:11.289Z,1520701751.289 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:09:11.690Z,1520701751.690 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:09:12.093Z,1520701752.093 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:09:12.494Z,1520701752.494 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:09:12.884Z,1520701752.884 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:09:13.285Z,1520701753.285 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:09:13.680Z,1520701753.680 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:09:14.076Z,1520701754.076 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:09:14.483Z,1520701754.483 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:09:14.880Z,1520701754.880 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:09:15.285Z,1520701755.285 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:09:15.688Z,1520701755.688 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:09:16.082Z,1520701756.082 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:09:16.497Z,1520701756.497 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:09:16.889Z,1520701756.889 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:09:17.286Z,1520701757.286 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:09:17.688Z,1520701757.688 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:09:18.088Z,1520701758.088 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:09:18.492Z,1520701758.492 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:09:18.888Z,1520701758.888 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:09:19.292Z,1520701759.292 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:09:19.692Z,1520701759.692 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:09:20.088Z,1520701760.088 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:09:20.486Z,1520701760.486 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:09:20.892Z,1520701760.892 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:09:21.290Z,1520701761.290 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:09:21.687Z,1520701761.687 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:09:22.086Z,1520701762.086 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:09:22.489Z,1520701762.489 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:09:22.891Z,1520701762.891 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:09:23.281Z,1520701763.281 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:09:23.681Z,1520701763.681 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:09:24.089Z,1520701764.089 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:09:24.477Z,1520701764.477 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:09:24.881Z,1520701764.881 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:09:25.280Z,1520701765.280 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:09:25.684Z,1520701765.684 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:09:26.089Z,1520701766.089 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:09:26.485Z,1520701766.485 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:09:26.888Z,1520701766.888 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:09:27.284Z,1520701767.284 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:09:27.687Z,1520701767.687 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:09:28.089Z,1520701768.089 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:09:28.487Z,1520701768.487 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:09:28.889Z,1520701768.889 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:09:29.288Z,1520701769.288 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:09:29.688Z,1520701769.688 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:09:30.088Z,1520701770.088 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:09:30.480Z,1520701770.480 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:09:30.881Z,1520701770.881 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:09:31.282Z,1520701771.282 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:09:31.682Z,1520701771.682 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:09:32.094Z,1520701772.094 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:09:32.490Z,1520701772.490 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:09:32.895Z,1520701772.895 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:09:33.292Z,1520701773.292 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:09:33.687Z,1520701773.687 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:09:34.076Z,1520701774.076 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:09:34.488Z,1520701774.488 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:09:34.889Z,1520701774.889 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:09:35.280Z,1520701775.280 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:09:35.697Z,1520701775.697 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:09:36.100Z,1520701776.100 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:09:36.485Z,1520701776.485 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:09:36.499Z,1520701776.499 [BPC1](ERROR): Bank B: No match for stick 6 serial number:1717 in the onboard configuration file.
2018-03-10T17:09:36.499Z,1520701776.499 [BPC1](ERROR): Failed to parse Bank B battery data
2018-03-10T17:09:36.499Z,1520701776.499 [BPC1] Data Fault, FailCount= 1
2018-03-10T17:09:36.499Z,1520701776.499 [BPC1](ERROR): Data Fault
2018-03-10T17:09:36.570Z,1520701776.570 [CBIT](ERROR): Data Fault in component: BPC1
2018-03-10T17:09:36.889Z,1520701776.889 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:09:37.289Z,1520701777.289 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:09:37.685Z,1520701777.685 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:09:37.747Z,1520701777.747 [CBIT](INFO): Clearing failed state for component BPC1
2018-03-10T17:09:37.747Z,1520701777.747 [BPC1] No Fault, FailCount= 1
2018-03-10T17:09:38.088Z,1520701778.088 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:09:38.492Z,1520701778.492 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:09:38.891Z,1520701778.891 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:09:39.291Z,1520701779.291 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:09:39.688Z,1520701779.688 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:09:40.088Z,1520701780.088 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:09:40.489Z,1520701780.489 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:09:40.888Z,1520701780.888 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:09:41.289Z,1520701781.289 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:09:41.688Z,1520701781.688 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:09:42.089Z,1520701782.089 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:09:42.489Z,1520701782.489 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:09:42.884Z,1520701782.884 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:09:43.280Z,1520701783.280 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:09:43.680Z,1520701783.680 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:09:44.092Z,1520701784.092 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:09:44.500Z,1520701784.500 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:09:44.892Z,1520701784.892 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:09:45.294Z,1520701785.294 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:09:45.680Z,1520701785.680 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:09:46.080Z,1520701786.080 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:09:46.492Z,1520701786.492 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:09:46.880Z,1520701786.880 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:09:46.918Z,1520701786.918 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-03-10T17:09:46.918Z,1520701786.918 [Default:CheckIn:C.Wait] Stopped
2018-03-10T17:09:46.918Z,1520701786.918 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-03-10T17:09:46.918Z,1520701786.918 [Default:CheckIn:D] Running Loop=1
2018-03-10T17:09:47.277Z,1520701787.277 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:09:47.337Z,1520701787.337 [Default:CheckIn:D] Stopped
2018-03-10T17:09:47.337Z,1520701787.337 [Default:CheckIn:E] Running Loop=1
2018-03-10T17:09:47.688Z,1520701787.688 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:09:47.724Z,1520701787.724 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 710.490299 min 
2018-03-10T17:09:47.724Z,1520701787.724 [Default:CheckIn:E] Stopped
2018-03-10T17:09:47.724Z,1520701787.724 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-03-10T17:09:47.724Z,1520701787.724 [Default:CheckIn] Stopped
2018-03-10T17:09:47.724Z,1520701787.724 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-03-10T17:09:47.725Z,1520701787.725 [Default:CheckIn](INFO): Running loop #70
2018-03-10T17:09:47.725Z,1520701787.725 [Default:CheckIn] Running Loop=70
2018-03-10T17:09:47.725Z,1520701787.725 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-03-10T17:09:47.725Z,1520701787.725 [Default:CheckIn:Read_GPS] Running Loop=1
2018-03-10T17:09:48.086Z,1520701788.086 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:09:51.325Z,1520701791.325 [NAL9602](INFO): Powering up
2018-03-10T17:09:51.342Z,1520701791.342 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:09:51.469Z,1520701791.469 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:09:51.845Z,1520701791.845 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:09:52.237Z,1520701792.237 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:09:52.640Z,1520701792.640 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:09:53.041Z,1520701793.041 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:09:53.439Z,1520701793.439 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:09:53.832Z,1520701793.832 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:09:54.243Z,1520701794.243 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:09:54.644Z,1520701794.644 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:09:55.035Z,1520701795.035 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:09:55.432Z,1520701795.432 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:09:55.844Z,1520701795.844 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:09:56.232Z,1520701796.232 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:09:56.636Z,1520701796.636 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:09:57.028Z,1520701797.028 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:09:57.432Z,1520701797.432 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:09:57.832Z,1520701797.832 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:09:58.232Z,1520701798.232 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:09:58.641Z,1520701798.641 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:09:59.039Z,1520701799.039 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:09:59.436Z,1520701799.436 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:09:59.839Z,1520701799.839 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:10:00.240Z,1520701800.240 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:10:00.640Z,1520701800.640 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:10:01.040Z,1520701801.040 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:10:01.440Z,1520701801.440 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:10:01.839Z,1520701801.839 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:10:02.220Z,1520701802.220 [NAL9602](INFO): NAL9602 initialized
2018-03-10T17:10:02.237Z,1520701802.237 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:10:02.632Z,1520701802.632 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:10:03.047Z,1520701803.047 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:10:03.451Z,1520701803.451 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:10:03.851Z,1520701803.851 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:10:04.238Z,1520701804.238 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:10:04.638Z,1520701804.638 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:10:05.046Z,1520701805.046 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:10:05.442Z,1520701805.442 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:10:05.837Z,1520701805.837 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:10:06.242Z,1520701806.242 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:10:06.629Z,1520701806.629 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:10:07.033Z,1520701807.033 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:10:07.432Z,1520701807.432 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:10:07.838Z,1520701807.838 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:10:08.240Z,1520701808.240 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:10:08.637Z,1520701808.637 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:10:09.037Z,1520701809.037 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:10:09.433Z,1520701809.433 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:10:09.837Z,1520701809.837 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:10:10.228Z,1520701810.228 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:10:10.637Z,1520701810.637 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:10:11.032Z,1520701811.032 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:10:11.432Z,1520701811.432 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:10:11.837Z,1520701811.837 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:10:12.232Z,1520701812.232 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:10:12.640Z,1520701812.640 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:10:13.041Z,1520701813.041 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:10:13.440Z,1520701813.440 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:10:13.839Z,1520701813.839 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:10:14.234Z,1520701814.234 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:10:14.636Z,1520701814.636 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:10:15.043Z,1520701815.043 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:10:15.435Z,1520701815.435 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:10:15.838Z,1520701815.838 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:10:16.243Z,1520701816.243 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:10:16.633Z,1520701816.633 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:10:17.032Z,1520701817.032 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:10:17.437Z,1520701817.437 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:10:17.841Z,1520701817.841 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:10:18.233Z,1520701818.233 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:10:18.633Z,1520701818.633 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:10:19.038Z,1520701819.038 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:10:19.438Z,1520701819.438 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:10:19.847Z,1520701819.847 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:10:20.241Z,1520701820.241 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:10:20.640Z,1520701820.640 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:10:21.028Z,1520701821.028 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:10:21.444Z,1520701821.444 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:10:21.853Z,1520701821.853 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:10:22.254Z,1520701822.254 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:10:22.637Z,1520701822.637 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:10:23.032Z,1520701823.032 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:10:23.432Z,1520701823.432 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:10:23.841Z,1520701823.841 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:10:24.239Z,1520701824.239 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:10:24.642Z,1520701824.642 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:10:25.036Z,1520701825.036 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:10:25.431Z,1520701825.431 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:10:25.829Z,1520701825.829 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:10:26.226Z,1520701826.226 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:10:26.633Z,1520701826.633 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:10:27.036Z,1520701827.036 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:10:27.437Z,1520701827.437 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:10:27.833Z,1520701827.833 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:10:28.232Z,1520701828.232 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:10:28.638Z,1520701828.638 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:10:29.040Z,1520701829.040 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:10:29.442Z,1520701829.442 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:10:29.833Z,1520701829.833 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:10:30.233Z,1520701830.233 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:10:30.628Z,1520701830.628 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:10:31.033Z,1520701831.033 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:10:31.432Z,1520701831.432 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:10:31.833Z,1520701831.833 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:10:32.233Z,1520701832.233 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:10:32.649Z,1520701832.649 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:10:33.028Z,1520701833.028 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:10:33.437Z,1520701833.437 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:10:33.838Z,1520701833.838 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:10:34.222Z,1520701834.222 [NAL9602](ERROR): Failed to receive proper response when querying signal strength for MT queue check.
2018-03-10T17:10:34.299Z,1520701834.299 [NAL9602](FAULT): received: 
+CSQ:0

OK36, 2, 0, 0, 0

OK
2018-03-10T17:10:34.299Z,1520701834.299 [NAL9602] Data Fault, FailCount= 5
2018-03-10T17:10:34.299Z,1520701834.299 [NAL9602](ERROR): Data Fault
2018-03-10T17:10:34.322Z,1520701834.322 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:10:34.384Z,1520701834.384 [CBIT](ERROR): Data Fault in component: NAL9602
2018-03-10T17:10:34.384Z,1520701834.384 [CBIT](CRITICAL): Data Fault in component: NAL9602
2018-03-10T17:10:34.620Z,1520701834.620 [NAL9602](INFO): Powering down
2018-03-10T17:10:34.638Z,1520701834.638 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:10:34.701Z,1520701834.701 [CBIT](INFO): Critical error at 20180310T171034
2018-03-10T17:10:35.053Z,1520701835.053 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:10:35.444Z,1520701835.444 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:10:35.840Z,1520701835.840 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:10:35.858Z,1520701835.858 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T17:10:35.858Z,1520701835.858 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 160
2018-03-10T17:10:35.858Z,1520701835.858 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-10T17:10:35.871Z,1520701835.871 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-10T17:10:36.232Z,1520701836.232 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:10:36.296Z,1520701836.296 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-10T17:10:36.296Z,1520701836.296 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 160
2018-03-10T17:10:36.632Z,1520701836.632 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:10:36.675Z,1520701836.675 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-10T17:10:36.676Z,1520701836.676 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-10T17:10:36.676Z,1520701836.676 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-10T17:10:37.037Z,1520701837.037 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:10:37.440Z,1520701837.440 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:10:37.832Z,1520701837.832 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:10:38.237Z,1520701838.237 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:10:38.634Z,1520701838.634 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:10:39.039Z,1520701839.039 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:10:39.428Z,1520701839.428 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:10:39.836Z,1520701839.836 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:10:40.228Z,1520701840.228 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:10:40.636Z,1520701840.636 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:10:41.032Z,1520701841.032 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:10:41.428Z,1520701841.428 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:10:41.832Z,1520701841.832 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:10:42.244Z,1520701842.244 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:10:42.640Z,1520701842.640 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:10:43.040Z,1520701843.040 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:10:43.452Z,1520701843.452 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:10:43.834Z,1520701843.834 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:10:44.228Z,1520701844.228 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:10:44.633Z,1520701844.633 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:10:45.032Z,1520701845.032 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:10:45.432Z,1520701845.432 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:10:45.836Z,1520701845.836 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:10:46.236Z,1520701846.236 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:10:46.632Z,1520701846.632 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:10:47.037Z,1520701847.037 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:10:47.444Z,1520701847.444 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:10:47.840Z,1520701847.840 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:10:48.249Z,1520701848.249 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:10:51.460Z,1520701851.460 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:10:51.570Z,1520701851.570 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:10:51.988Z,1520701851.988 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:10:52.376Z,1520701852.376 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:10:52.780Z,1520701852.780 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:10:53.188Z,1520701853.188 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:10:53.588Z,1520701853.588 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:10:53.989Z,1520701853.989 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:10:54.388Z,1520701854.388 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:10:54.787Z,1520701854.787 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:10:55.189Z,1520701855.189 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:10:55.588Z,1520701855.588 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:10:55.988Z,1520701855.988 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:10:56.388Z,1520701856.388 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:10:56.790Z,1520701856.790 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:10:57.178Z,1520701857.178 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:10:57.588Z,1520701857.588 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:10:57.990Z,1520701857.990 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:10:58.388Z,1520701858.388 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:10:58.791Z,1520701858.791 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:10:59.191Z,1520701859.191 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:10:59.583Z,1520701859.583 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:10:59.990Z,1520701859.990 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:11:00.392Z,1520701860.392 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:11:00.776Z,1520701860.776 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:11:01.176Z,1520701861.176 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:11:01.600Z,1520701861.600 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:11:01.976Z,1520701861.976 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:11:02.376Z,1520701862.376 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:11:02.800Z,1520701862.800 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:11:03.180Z,1520701863.180 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:11:03.584Z,1520701863.584 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:11:03.980Z,1520701863.980 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:11:04.376Z,1520701864.376 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:11:04.776Z,1520701864.776 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:11:05.184Z,1520701865.184 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:11:05.580Z,1520701865.580 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:11:05.976Z,1520701865.976 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:11:06.380Z,1520701866.380 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:11:06.781Z,1520701866.781 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:11:07.188Z,1520701867.188 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:11:07.585Z,1520701867.585 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:11:07.987Z,1520701867.987 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:11:08.388Z,1520701868.388 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:11:08.797Z,1520701868.797 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:11:09.192Z,1520701869.192 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:11:09.594Z,1520701869.594 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:11:09.994Z,1520701869.994 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:11:10.388Z,1520701870.388 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:11:10.776Z,1520701870.776 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:11:11.176Z,1520701871.176 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:11:11.584Z,1520701871.584 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:11:11.984Z,1520701871.984 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:11:12.380Z,1520701872.380 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:11:12.776Z,1520701872.776 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:11:13.177Z,1520701873.177 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:11:13.584Z,1520701873.584 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:11:13.976Z,1520701873.976 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:11:14.385Z,1520701874.385 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:11:14.784Z,1520701874.784 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:11:15.181Z,1520701875.181 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:11:15.584Z,1520701875.584 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:11:15.983Z,1520701875.983 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:11:16.384Z,1520701876.384 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:11:16.780Z,1520701876.780 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:11:17.196Z,1520701877.196 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:11:17.587Z,1520701877.587 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:11:17.983Z,1520701877.983 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:11:18.378Z,1520701878.378 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:11:18.787Z,1520701878.787 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:11:19.189Z,1520701879.189 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:11:19.586Z,1520701879.586 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:11:19.983Z,1520701879.983 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:11:20.387Z,1520701880.387 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:11:20.788Z,1520701880.788 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:11:21.191Z,1520701881.191 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:11:21.582Z,1520701881.582 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:11:21.988Z,1520701881.988 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:11:22.390Z,1520701882.390 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:11:22.793Z,1520701882.793 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:11:23.185Z,1520701883.185 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:11:23.588Z,1520701883.588 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:11:23.983Z,1520701883.983 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:11:24.383Z,1520701884.383 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:11:24.783Z,1520701884.783 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:11:25.176Z,1520701885.176 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:11:25.576Z,1520701885.576 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:11:25.991Z,1520701885.991 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:11:26.391Z,1520701886.391 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:11:26.793Z,1520701886.793 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:11:27.180Z,1520701887.180 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:11:27.576Z,1520701887.576 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:11:27.980Z,1520701887.980 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:11:28.380Z,1520701888.380 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:11:28.777Z,1520701888.777 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:11:29.180Z,1520701889.180 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:11:29.584Z,1520701889.584 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:11:29.973Z,1520701889.973 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:11:30.380Z,1520701890.380 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:11:30.784Z,1520701890.784 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:11:31.184Z,1520701891.184 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:11:31.584Z,1520701891.584 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:11:31.984Z,1520701891.984 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:11:32.385Z,1520701892.385 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:11:32.789Z,1520701892.789 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:11:33.187Z,1520701893.187 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:11:33.592Z,1520701893.592 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:11:33.988Z,1520701893.988 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:11:34.393Z,1520701894.393 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:11:34.784Z,1520701894.784 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:11:35.188Z,1520701895.188 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:11:35.587Z,1520701895.587 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:11:35.996Z,1520701895.996 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:11:36.388Z,1520701896.388 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:11:36.796Z,1520701896.796 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:11:37.176Z,1520701897.176 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:11:37.584Z,1520701897.584 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:11:37.985Z,1520701897.985 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:11:38.376Z,1520701898.376 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:11:38.784Z,1520701898.784 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:11:39.185Z,1520701899.185 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:11:39.577Z,1520701899.577 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:11:39.980Z,1520701899.980 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:11:40.384Z,1520701900.384 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:11:40.780Z,1520701900.780 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:11:41.188Z,1520701901.188 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:11:41.586Z,1520701901.586 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:11:41.984Z,1520701901.984 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:11:42.387Z,1520701902.387 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:11:42.789Z,1520701902.789 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:11:43.187Z,1520701903.187 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:11:43.583Z,1520701903.583 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:11:43.992Z,1520701903.992 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:11:44.388Z,1520701904.388 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:11:44.787Z,1520701904.787 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:11:45.186Z,1520701905.186 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:11:45.592Z,1520701905.592 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:11:45.994Z,1520701905.994 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:11:46.402Z,1520701906.402 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:11:46.780Z,1520701906.780 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:11:47.180Z,1520701907.180 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:11:47.580Z,1520701907.580 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:11:47.980Z,1520701907.980 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:11:48.392Z,1520701908.392 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:11:51.531Z,1520701911.531 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:11:51.658Z,1520701911.658 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:11:52.056Z,1520701912.056 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:11:52.476Z,1520701912.476 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:11:52.876Z,1520701912.876 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:11:53.276Z,1520701913.276 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:11:53.656Z,1520701913.656 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:11:54.056Z,1520701914.056 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:11:54.457Z,1520701914.457 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:11:54.856Z,1520701914.856 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:11:55.264Z,1520701915.264 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:11:55.656Z,1520701915.656 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:11:56.060Z,1520701916.060 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:11:56.457Z,1520701916.457 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:11:56.860Z,1520701916.860 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:11:57.258Z,1520701917.258 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:11:57.661Z,1520701917.661 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:11:58.062Z,1520701918.062 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:11:58.463Z,1520701918.463 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:11:58.864Z,1520701918.864 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:11:59.269Z,1520701919.269 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:11:59.662Z,1520701919.662 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:12:00.063Z,1520701920.063 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:12:00.464Z,1520701920.464 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:12:00.856Z,1520701920.856 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:12:01.257Z,1520701921.257 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:12:01.656Z,1520701921.656 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:12:02.056Z,1520701922.056 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:12:02.452Z,1520701922.452 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:12:02.871Z,1520701922.871 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:12:03.252Z,1520701923.252 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:12:03.656Z,1520701923.656 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:12:04.060Z,1520701924.060 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:12:04.460Z,1520701924.460 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:12:04.860Z,1520701924.860 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:12:05.264Z,1520701925.264 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:12:05.652Z,1520701925.652 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:12:06.061Z,1520701926.061 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:12:06.460Z,1520701926.460 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:12:06.857Z,1520701926.857 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:12:07.264Z,1520701927.264 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:12:07.664Z,1520701927.664 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:12:08.065Z,1520701928.065 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:12:08.464Z,1520701928.464 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:12:08.863Z,1520701928.863 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:12:09.265Z,1520701929.265 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:12:09.667Z,1520701929.667 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:12:10.064Z,1520701930.064 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:12:10.467Z,1520701930.467 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:12:10.861Z,1520701930.861 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:12:11.263Z,1520701931.263 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:12:11.669Z,1520701931.669 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:12:12.060Z,1520701932.060 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:12:12.460Z,1520701932.460 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:12:12.863Z,1520701932.863 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:12:13.264Z,1520701933.264 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:12:13.656Z,1520701933.656 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:12:14.056Z,1520701934.056 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:12:14.468Z,1520701934.468 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:12:14.856Z,1520701934.856 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:12:15.252Z,1520701935.252 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:12:15.657Z,1520701935.657 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:12:16.060Z,1520701936.060 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:12:16.460Z,1520701936.460 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:12:16.860Z,1520701936.860 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:12:17.256Z,1520701937.256 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:12:17.652Z,1520701937.652 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:12:18.072Z,1520701938.072 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:12:18.476Z,1520701938.476 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:12:18.853Z,1520701938.853 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:12:19.276Z,1520701939.276 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:12:19.655Z,1520701939.655 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:12:20.053Z,1520701940.053 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:12:20.455Z,1520701940.455 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:12:20.855Z,1520701940.855 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:12:21.256Z,1520701941.256 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:12:21.661Z,1520701941.661 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:12:22.061Z,1520701942.061 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:12:22.466Z,1520701942.466 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:12:22.863Z,1520701942.863 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:12:23.268Z,1520701943.268 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:12:23.660Z,1520701943.660 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:12:24.064Z,1520701944.064 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:12:24.465Z,1520701944.465 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:12:24.864Z,1520701944.864 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:12:25.265Z,1520701945.265 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:12:25.673Z,1520701945.673 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:12:26.062Z,1520701946.062 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:12:26.460Z,1520701946.460 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:12:26.876Z,1520701946.876 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:12:27.268Z,1520701947.268 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:12:27.656Z,1520701947.656 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:12:28.056Z,1520701948.056 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:12:28.452Z,1520701948.452 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:12:28.860Z,1520701948.860 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:12:29.257Z,1520701949.257 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:12:29.652Z,1520701949.652 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:12:30.060Z,1520701950.060 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:12:30.456Z,1520701950.456 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:12:30.856Z,1520701950.856 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:12:31.256Z,1520701951.256 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:12:31.676Z,1520701951.676 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:12:32.056Z,1520701952.056 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:12:32.456Z,1520701952.456 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:12:32.876Z,1520701952.876 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:12:33.256Z,1520701953.256 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:12:33.672Z,1520701953.672 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:12:34.057Z,1520701954.057 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:12:34.473Z,1520701954.473 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:12:34.502Z,1520701954.502 [CBIT](INFO): Clearing failed state for component NAL9602
2018-03-10T17:12:34.502Z,1520701954.502 [NAL9602] No Fault, FailCount= 5
2018-03-10T17:12:34.844Z,1520701954.844 [NAL9602](INFO): Powering up NAL9602
2018-03-10T17:12:34.862Z,1520701954.862 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:12:35.261Z,1520701955.261 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:12:35.657Z,1520701955.657 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:12:36.058Z,1520701956.058 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:12:36.461Z,1520701956.461 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:12:36.856Z,1520701956.856 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:12:37.262Z,1520701957.262 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:12:37.669Z,1520701957.669 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:12:38.060Z,1520701958.060 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:12:38.464Z,1520701958.464 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:12:38.864Z,1520701958.864 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:12:39.268Z,1520701959.268 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:12:39.668Z,1520701959.668 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:12:40.060Z,1520701960.060 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:12:40.468Z,1520701960.468 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:12:40.853Z,1520701960.853 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:12:41.256Z,1520701961.256 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:12:41.652Z,1520701961.652 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:12:42.052Z,1520701962.052 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:12:42.456Z,1520701962.456 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:12:42.857Z,1520701962.857 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:12:43.254Z,1520701963.254 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:12:43.656Z,1520701963.656 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:12:44.056Z,1520701964.056 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:12:44.456Z,1520701964.456 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:12:44.877Z,1520701964.877 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:12:45.276Z,1520701965.276 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:12:45.640Z,1520701965.640 [NAL9602](INFO): NAL9602 initialized
2018-03-10T17:12:45.657Z,1520701965.657 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:12:46.057Z,1520701966.057 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:12:46.436Z,1520701966.436 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-03-10T17:12:46.436Z,1520701966.436 [NAL9602] Data Fault, FailCount= 1
2018-03-10T17:12:46.436Z,1520701966.436 [NAL9602](ERROR): Data Fault
2018-03-10T17:12:46.453Z,1520701966.453 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:12:46.532Z,1520701966.532 [CBIT](ERROR): Data Fault in component: NAL9602
2018-03-10T17:12:46.840Z,1520701966.840 [NAL9602](INFO): Powering down
2018-03-10T17:12:46.857Z,1520701966.857 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:12:47.256Z,1520701967.256 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:12:47.656Z,1520701967.656 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:12:47.708Z,1520701967.708 [CBIT](INFO): Clearing failed state for component NAL9602
2018-03-10T17:12:47.708Z,1520701967.708 [NAL9602] No Fault, FailCount= 1
2018-03-10T17:12:48.052Z,1520701968.052 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:12:48.456Z,1520701968.456 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:12:51.744Z,1520701971.744 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:12:51.871Z,1520701971.871 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:12:52.257Z,1520701972.257 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:12:52.660Z,1520701972.660 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:12:53.056Z,1520701973.056 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:12:53.456Z,1520701973.456 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:12:53.854Z,1520701973.854 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:12:54.245Z,1520701974.245 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:12:54.652Z,1520701974.652 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:12:55.045Z,1520701975.045 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:12:55.461Z,1520701975.461 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:12:55.852Z,1520701975.852 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:12:56.261Z,1520701976.261 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:12:56.648Z,1520701976.648 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:12:57.068Z,1520701977.068 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:12:57.448Z,1520701977.448 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:12:57.845Z,1520701977.845 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:12:58.247Z,1520701978.247 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:12:58.653Z,1520701978.653 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:12:59.056Z,1520701979.056 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:12:59.452Z,1520701979.452 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:12:59.844Z,1520701979.844 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:13:00.244Z,1520701980.244 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:13:00.648Z,1520701980.648 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:13:01.045Z,1520701981.045 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:13:01.448Z,1520701981.448 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:13:01.868Z,1520701981.868 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:13:02.248Z,1520701982.248 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:13:02.660Z,1520701982.660 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:13:03.048Z,1520701983.048 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:13:03.448Z,1520701983.448 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:13:03.853Z,1520701983.853 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:13:04.252Z,1520701984.252 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:13:04.653Z,1520701984.653 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:13:05.052Z,1520701985.052 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:13:05.452Z,1520701985.452 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:13:05.858Z,1520701985.858 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:13:06.246Z,1520701986.246 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:13:06.652Z,1520701986.652 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:13:07.044Z,1520701987.044 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:13:07.444Z,1520701987.444 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:13:07.858Z,1520701987.858 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:13:08.244Z,1520701988.244 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:13:08.652Z,1520701988.652 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:13:08.672Z,1520701988.672 [BPC1](ERROR): Failed to receive battery data
2018-03-10T17:13:08.672Z,1520701988.672 [BPC1] Communications Fault, FailCount= 1
2018-03-10T17:13:08.672Z,1520701988.672 [BPC1](ERROR): Communications Fault
2018-03-10T17:13:08.695Z,1520701988.695 [CBIT](ERROR): Communications Fault in component: BPC1
2018-03-10T17:13:09.060Z,1520701989.060 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:13:09.448Z,1520701989.448 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:13:09.846Z,1520701989.846 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:13:09.885Z,1520701989.885 [CBIT](INFO): Clearing failed state for component BPC1
2018-03-10T17:13:09.885Z,1520701989.885 [BPC1] No Fault, FailCount= 1
2018-03-10T17:13:10.264Z,1520701990.264 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:13:10.653Z,1520701990.653 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:13:11.055Z,1520701991.055 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:13:11.464Z,1520701991.464 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:13:11.848Z,1520701991.848 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:13:12.256Z,1520701992.256 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:13:12.655Z,1520701992.655 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:13:13.044Z,1520701993.044 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:13:13.448Z,1520701993.448 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:13:13.848Z,1520701993.848 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:13:14.244Z,1520701994.244 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:13:14.644Z,1520701994.644 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:13:15.068Z,1520701995.068 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:13:15.460Z,1520701995.460 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:13:15.842Z,1520701995.842 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:13:16.247Z,1520701996.247 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:13:16.644Z,1520701996.644 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:13:17.032Z,1520701997.032 [NAL9602](INFO): Powering up NAL9602
2018-03-10T17:13:17.049Z,1520701997.049 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:13:17.460Z,1520701997.460 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:13:17.856Z,1520701997.856 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:13:18.256Z,1520701998.256 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:13:18.661Z,1520701998.661 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:13:19.050Z,1520701999.050 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:13:19.450Z,1520701999.450 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:13:19.859Z,1520701999.859 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:13:20.256Z,1520702000.256 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:13:20.657Z,1520702000.657 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:13:21.053Z,1520702001.053 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:13:21.457Z,1520702001.457 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:13:21.845Z,1520702001.845 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:13:22.262Z,1520702002.262 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:13:22.644Z,1520702002.644 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:13:23.044Z,1520702003.044 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:13:23.460Z,1520702003.460 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:13:23.844Z,1520702003.844 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:13:24.248Z,1520702004.248 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:13:24.660Z,1520702004.660 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:13:25.064Z,1520702005.064 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:13:25.455Z,1520702005.455 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:13:25.852Z,1520702005.852 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:13:26.256Z,1520702006.256 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:13:26.644Z,1520702006.644 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:13:27.065Z,1520702007.065 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:13:27.463Z,1520702007.463 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:13:27.836Z,1520702007.836 [NAL9602](INFO): NAL9602 initialized
2018-03-10T17:13:27.853Z,1520702007.853 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:13:28.248Z,1520702008.248 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:13:28.655Z,1520702008.655 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:13:29.064Z,1520702009.064 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:13:29.471Z,1520702009.471 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:13:29.849Z,1520702009.849 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:13:30.259Z,1520702010.259 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:13:30.652Z,1520702010.652 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:13:31.062Z,1520702011.062 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:13:31.456Z,1520702011.456 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:13:31.856Z,1520702011.856 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:13:32.257Z,1520702012.257 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:13:32.661Z,1520702012.661 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:13:33.052Z,1520702013.052 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:13:33.445Z,1520702013.445 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:13:33.849Z,1520702013.849 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:13:34.248Z,1520702014.248 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:13:34.661Z,1520702014.661 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:13:35.065Z,1520702015.065 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:13:35.471Z,1520702015.471 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:13:35.845Z,1520702015.845 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:13:36.249Z,1520702016.249 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:13:36.656Z,1520702016.656 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:13:36.686Z,1520702016.686 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T17:13:36.686Z,1520702016.686 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 161
2018-03-10T17:13:36.686Z,1520702016.686 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-10T17:13:36.700Z,1520702016.700 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-10T17:13:37.053Z,1520702017.053 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:13:37.100Z,1520702017.100 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-10T17:13:37.100Z,1520702017.100 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 161
2018-03-10T17:13:37.448Z,1520702017.448 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:13:37.478Z,1520702017.478 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-10T17:13:37.478Z,1520702017.478 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-10T17:13:37.478Z,1520702017.478 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-10T17:13:37.856Z,1520702017.856 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:13:38.257Z,1520702018.257 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:13:38.662Z,1520702018.662 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:13:39.067Z,1520702019.067 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:13:39.471Z,1520702019.471 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:13:39.844Z,1520702019.844 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:13:40.248Z,1520702020.248 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:13:40.653Z,1520702020.653 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:13:40.662Z,1520702020.662 [BPC1](FAULT): Failed to initialize
2018-03-10T17:13:40.662Z,1520702020.662 [BPC1] Communications Fault, FailCount= 2
2018-03-10T17:13:40.662Z,1520702020.662 [BPC1](ERROR): Communications Fault
2018-03-10T17:13:40.738Z,1520702020.738 [CBIT](ERROR): Communications Fault in component: BPC1
2018-03-10T17:13:41.049Z,1520702021.049 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:13:41.454Z,1520702021.454 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:13:41.855Z,1520702021.855 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:13:41.904Z,1520702021.904 [CBIT](INFO): Clearing failed state for component BPC1
2018-03-10T17:13:41.904Z,1520702021.904 [BPC1] No Fault, FailCount= 2
2018-03-10T17:13:42.253Z,1520702022.253 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:13:42.654Z,1520702022.654 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:13:43.055Z,1520702023.055 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:13:43.442Z,1520702023.442 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:13:43.860Z,1520702023.860 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:13:44.244Z,1520702024.244 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:13:44.649Z,1520702024.649 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:13:45.056Z,1520702025.056 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:13:45.449Z,1520702025.449 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:13:45.854Z,1520702025.854 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:13:46.256Z,1520702026.256 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:13:46.649Z,1520702026.649 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:13:47.054Z,1520702027.054 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:13:47.460Z,1520702027.460 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:13:47.867Z,1520702027.867 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:13:48.264Z,1520702028.264 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:13:48.648Z,1520702028.648 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:13:51.835Z,1520702031.835 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:13:52.010Z,1520702032.010 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:13:52.346Z,1520702032.346 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:13:52.754Z,1520702032.754 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:13:53.145Z,1520702033.145 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:13:53.521Z,1520702033.521 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:13:53.942Z,1520702033.942 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:13:54.333Z,1520702034.333 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:13:54.721Z,1520702034.721 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:13:55.135Z,1520702035.135 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:13:55.521Z,1520702035.521 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:13:55.920Z,1520702035.920 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:13:56.322Z,1520702036.322 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:13:56.721Z,1520702036.721 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:13:57.137Z,1520702037.137 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:13:57.519Z,1520702037.519 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:13:57.914Z,1520702037.914 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:13:58.318Z,1520702038.318 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:13:58.743Z,1520702038.743 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:13:59.140Z,1520702039.140 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:13:59.538Z,1520702039.538 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:13:59.932Z,1520702039.932 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:14:00.330Z,1520702040.330 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:14:00.758Z,1520702040.758 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:14:01.153Z,1520702041.153 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:14:01.534Z,1520702041.534 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:14:01.938Z,1520702041.938 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:14:02.356Z,1520702042.356 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:14:02.727Z,1520702042.727 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:14:03.134Z,1520702043.134 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:14:03.528Z,1520702043.528 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:14:03.936Z,1520702043.936 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:14:04.336Z,1520702044.336 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:14:04.734Z,1520702044.734 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:14:05.128Z,1520702045.128 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:14:05.501Z,1520702045.501 [NAL9602](INFO): SBD MO Status=2, MOMSN=5836, MT Status=2, MTMSN=0
2018-03-10T17:14:05.502Z,1520702045.502 [NAL9602](ERROR): Failed to initiate SBD session. Error code: 2
2018-03-10T17:14:05.528Z,1520702045.528 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:14:05.941Z,1520702045.941 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:14:06.346Z,1520702046.346 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:14:06.754Z,1520702046.754 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:14:07.137Z,1520702047.137 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:14:07.538Z,1520702047.538 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:14:07.961Z,1520702047.961 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:14:08.360Z,1520702048.360 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:14:08.731Z,1520702048.731 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:14:09.155Z,1520702049.155 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:14:09.534Z,1520702049.534 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:14:09.935Z,1520702049.935 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:14:10.344Z,1520702050.344 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:14:10.735Z,1520702050.735 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:14:11.129Z,1520702051.129 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:14:11.533Z,1520702051.533 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:14:11.929Z,1520702051.929 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:14:12.327Z,1520702052.327 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:14:12.335Z,1520702052.335 [BPC1](FAULT): Failed to initialize
2018-03-10T17:14:12.335Z,1520702052.335 [BPC1] Communications Fault, FailCount= 3
2018-03-10T17:14:12.336Z,1520702052.336 [BPC1](ERROR): Communications Fault
2018-03-10T17:14:12.358Z,1520702052.358 [CBIT](ERROR): Communications Fault in component: BPC1
2018-03-10T17:14:12.735Z,1520702052.735 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:14:13.146Z,1520702053.146 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:14:13.544Z,1520702053.544 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:14:13.610Z,1520702053.610 [CBIT](INFO): Clearing failed state for component BPC1
2018-03-10T17:14:13.610Z,1520702053.610 [BPC1] No Fault, FailCount= 3
2018-03-10T17:14:13.927Z,1520702053.927 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:14:14.330Z,1520702054.330 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:14:14.734Z,1520702054.734 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:14:15.157Z,1520702055.157 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:14:15.553Z,1520702055.553 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:14:15.923Z,1520702055.923 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:14:16.332Z,1520702056.332 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:14:16.755Z,1520702056.755 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:14:17.137Z,1520702057.137 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:14:17.535Z,1520702057.535 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:14:17.929Z,1520702057.929 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:14:18.325Z,1520702058.325 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:14:18.737Z,1520702058.737 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:14:19.125Z,1520702059.125 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:14:19.527Z,1520702059.527 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:14:19.927Z,1520702059.927 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:14:20.314Z,1520702060.314 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:14:20.737Z,1520702060.737 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:14:21.144Z,1520702061.144 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:14:21.559Z,1520702061.559 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:14:21.929Z,1520702061.929 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:14:22.344Z,1520702062.344 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:14:22.749Z,1520702062.749 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:14:23.145Z,1520702063.145 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:14:23.526Z,1520702063.526 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:14:23.934Z,1520702063.934 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:14:24.337Z,1520702064.337 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:14:24.737Z,1520702064.737 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:14:25.131Z,1520702065.131 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:14:25.530Z,1520702065.530 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:14:25.940Z,1520702065.940 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:14:26.329Z,1520702066.329 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:14:26.720Z,1520702066.720 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:14:27.132Z,1520702067.132 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:14:27.514Z,1520702067.514 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:14:27.932Z,1520702067.932 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:14:28.348Z,1520702068.348 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:14:28.747Z,1520702068.747 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:14:29.124Z,1520702069.124 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:14:29.536Z,1520702069.536 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:14:29.944Z,1520702069.944 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:14:30.331Z,1520702070.331 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:14:30.760Z,1520702070.760 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:14:31.134Z,1520702071.134 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:14:31.548Z,1520702071.548 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:14:31.934Z,1520702071.934 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:14:32.330Z,1520702072.330 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:14:32.728Z,1520702072.728 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:14:33.133Z,1520702073.133 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:14:33.538Z,1520702073.538 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:14:33.929Z,1520702073.929 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:14:34.347Z,1520702074.347 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:14:34.735Z,1520702074.735 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:14:35.120Z,1520702075.120 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:14:35.570Z,1520702075.570 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:14:35.958Z,1520702075.958 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:14:36.341Z,1520702076.341 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:14:36.740Z,1520702076.740 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:14:37.134Z,1520702077.134 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:14:37.558Z,1520702077.558 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:14:37.937Z,1520702077.937 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:14:38.350Z,1520702078.350 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:14:38.734Z,1520702078.734 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:14:39.131Z,1520702079.131 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:14:39.520Z,1520702079.520 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:14:39.933Z,1520702079.933 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:14:40.336Z,1520702080.336 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:14:40.730Z,1520702080.730 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:14:41.132Z,1520702081.132 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:14:41.532Z,1520702081.532 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:14:41.928Z,1520702081.928 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:14:42.354Z,1520702082.354 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:14:42.733Z,1520702082.733 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:14:43.141Z,1520702083.141 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:14:43.547Z,1520702083.547 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:14:43.947Z,1520702083.947 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:14:44.322Z,1520702084.322 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:14:44.343Z,1520702084.343 [BPC1](FAULT): Failed to initialize
2018-03-10T17:14:44.343Z,1520702084.343 [BPC1] Communications Fault, FailCount= 4
2018-03-10T17:14:44.343Z,1520702084.343 [BPC1](ERROR): Communications Fault
2018-03-10T17:14:44.365Z,1520702084.365 [CBIT](ERROR): Communications Fault in component: BPC1
2018-03-10T17:14:44.749Z,1520702084.749 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:14:45.133Z,1520702085.133 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:14:45.536Z,1520702085.536 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:14:45.577Z,1520702085.577 [CBIT](INFO): Clearing failed state for component BPC1
2018-03-10T17:14:45.577Z,1520702085.577 [BPC1] No Fault, FailCount= 4
2018-03-10T17:14:45.961Z,1520702085.961 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:14:46.335Z,1520702086.335 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:14:46.730Z,1520702086.730 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:14:47.128Z,1520702087.128 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:14:47.530Z,1520702087.530 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:14:47.934Z,1520702087.934 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:14:47.987Z,1520702087.987 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-03-10T17:09:47.7Z
2018-03-10T17:14:47.987Z,1520702087.987 [Default:CheckIn:Read_GPS] Stopped
2018-03-10T17:14:47.987Z,1520702087.987 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-03-10T17:14:48.329Z,1520702088.329 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:14:48.876Z,1520702088.876 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:14:52.009Z,1520702092.009 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:14:52.139Z,1520702092.139 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:14:52.482Z,1520702092.482 [DataOverHttps](INFO): Sending 70 bytes from file Logs/20180310T051512/Courier0280.lzma
2018-03-10T17:14:52.502Z,1520702092.502 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:14:52.895Z,1520702092.895 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:14:53.277Z,1520702093.277 [DataOverHttps](INFO): Moved sent file to Logs/20180310T051512/Courier0280.lzma.bak
2018-03-10T17:14:53.277Z,1520702093.277 [DataOverHttps](INFO): SBD MOMSN=8006463
2018-03-10T17:14:53.311Z,1520702093.311 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:14:54.016Z,1520702094.016 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:14:54.139Z,1520702094.139 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:14:54.496Z,1520702094.496 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:14:57.741Z,1520702097.741 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:14:57.855Z,1520702097.855 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:14:58.248Z,1520702098.248 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:14:58.659Z,1520702098.659 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:14:59.056Z,1520702099.056 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:14:59.437Z,1520702099.437 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:14:59.841Z,1520702099.841 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:15:03.043Z,1520702103.043 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:15:03.168Z,1520702103.168 [DataOverHttps](INFO): Sending 295 bytes from file Logs/20180310T051512/Express0281.lzma
2018-03-10T17:15:03.210Z,1520702103.210 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:15:03.541Z,1520702103.541 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:15:03.902Z,1520702103.902 [DataOverHttps](INFO): Moved sent file to Logs/20180310T051512/Express0281.lzma.bak
2018-03-10T17:15:03.902Z,1520702103.902 [DataOverHttps](INFO): SBD MOMSN=8006466
2018-03-10T17:15:03.969Z,1520702103.969 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:15:04.661Z,1520702104.661 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:15:04.694Z,1520702104.694 [Default:CheckIn:Read_Iridium] Stopped
2018-03-10T17:15:04.695Z,1520702104.695 [Default:CheckIn:C.Wait] Running Loop=1
2018-03-10T17:15:04.695Z,1520702104.695 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-03-10T17:15:04.798Z,1520702104.798 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:15:05.165Z,1520702105.165 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:15:08.257Z,1520702108.257 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session.
2018-03-10T17:15:08.274Z,1520702108.274 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:15:08.410Z,1520702108.410 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:15:08.763Z,1520702108.763 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:15:09.181Z,1520702109.181 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:15:09.575Z,1520702109.575 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:15:09.960Z,1520702109.960 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:15:10.365Z,1520702110.365 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:15:10.768Z,1520702110.768 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:15:11.152Z,1520702111.152 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:15:11.561Z,1520702111.561 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:15:11.960Z,1520702111.960 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:15:12.364Z,1520702112.364 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:15:12.759Z,1520702112.759 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:15:13.168Z,1520702113.168 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:15:13.554Z,1520702113.554 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:15:13.956Z,1520702113.956 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:15:14.354Z,1520702114.354 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:15:14.758Z,1520702114.758 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:15:15.154Z,1520702115.154 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:15:15.581Z,1520702115.581 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:15:15.974Z,1520702115.974 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:15:16.352Z,1520702116.352 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:15:16.757Z,1520702116.757 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:15:17.172Z,1520702117.172 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:15:17.560Z,1520702117.560 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:15:17.956Z,1520702117.956 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:15:18.353Z,1520702118.353 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:15:18.760Z,1520702118.760 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:15:19.150Z,1520702119.150 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:15:19.548Z,1520702119.548 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:15:19.956Z,1520702119.956 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:15:20.348Z,1520702120.348 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:15:20.756Z,1520702120.756 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:15:21.156Z,1520702121.156 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:15:21.556Z,1520702121.556 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:15:21.956Z,1520702121.956 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:15:22.360Z,1520702122.360 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:15:22.780Z,1520702122.780 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:15:23.169Z,1520702123.169 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:15:23.562Z,1520702123.562 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:15:23.962Z,1520702123.962 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:15:24.369Z,1520702124.369 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:15:24.766Z,1520702124.766 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:15:25.169Z,1520702125.169 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:15:25.565Z,1520702125.565 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:15:25.959Z,1520702125.959 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:15:26.358Z,1520702126.358 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:15:26.762Z,1520702126.762 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:15:27.164Z,1520702127.164 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:15:27.551Z,1520702127.551 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:15:27.953Z,1520702127.953 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:15:28.352Z,1520702128.352 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:15:28.764Z,1520702128.764 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:15:29.148Z,1520702129.148 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:15:29.555Z,1520702129.555 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:15:29.960Z,1520702129.960 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:15:30.364Z,1520702130.364 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:15:30.758Z,1520702130.758 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:15:31.157Z,1520702131.157 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:15:31.565Z,1520702131.565 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:15:31.969Z,1520702131.969 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:15:32.373Z,1520702132.373 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:15:32.765Z,1520702132.765 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:15:33.170Z,1520702133.170 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:15:33.562Z,1520702133.562 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:15:33.962Z,1520702133.962 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:15:34.349Z,1520702134.349 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:15:34.750Z,1520702134.750 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:15:35.152Z,1520702135.152 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:15:35.553Z,1520702135.553 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:15:35.965Z,1520702135.965 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:15:36.364Z,1520702136.364 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:15:36.760Z,1520702136.760 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:15:37.177Z,1520702137.177 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:15:37.563Z,1520702137.563 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:15:37.964Z,1520702137.964 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:15:38.354Z,1520702138.354 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:15:38.744Z,1520702138.744 [NAL9602](INFO): Powering down
2018-03-10T17:15:38.772Z,1520702138.772 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:15:39.157Z,1520702139.157 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:15:39.567Z,1520702139.567 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:15:39.965Z,1520702139.965 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:15:40.348Z,1520702140.348 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:15:40.772Z,1520702140.772 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:15:41.152Z,1520702141.152 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:15:41.552Z,1520702141.552 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:15:41.948Z,1520702141.948 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:15:42.352Z,1520702142.352 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:15:42.749Z,1520702142.749 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:15:42.795Z,1520702142.795 [CBIT](DEBUG): EFC running - data check-sum false
2018-03-10T17:15:43.149Z,1520702143.149 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:15:43.552Z,1520702143.552 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:15:43.952Z,1520702143.952 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:15:44.347Z,1520702144.347 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:15:44.765Z,1520702144.765 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:15:45.154Z,1520702145.154 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:15:45.556Z,1520702145.556 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:15:45.955Z,1520702145.955 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:15:46.373Z,1520702146.373 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:15:46.777Z,1520702146.777 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:15:47.151Z,1520702147.151 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:15:47.560Z,1520702147.560 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:15:47.996Z,1520702147.996 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:15:48.371Z,1520702148.371 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:15:48.762Z,1520702148.762 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:15:49.162Z,1520702149.162 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:15:49.563Z,1520702149.563 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:15:49.961Z,1520702149.961 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:15:50.368Z,1520702150.368 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:15:50.761Z,1520702150.761 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:15:51.161Z,1520702151.161 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:15:51.560Z,1520702151.560 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:15:51.962Z,1520702151.962 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:15:52.353Z,1520702152.353 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:15:52.768Z,1520702152.768 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:15:53.165Z,1520702153.165 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:15:53.574Z,1520702153.574 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:15:53.977Z,1520702153.977 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:15:54.356Z,1520702154.356 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:15:54.757Z,1520702154.757 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:15:55.169Z,1520702155.169 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:15:55.552Z,1520702155.552 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:15:55.948Z,1520702155.948 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:15:56.353Z,1520702156.353 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:15:56.752Z,1520702156.752 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:15:57.156Z,1520702157.156 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:15:57.553Z,1520702157.553 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:15:57.955Z,1520702157.955 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:15:58.356Z,1520702158.356 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:15:58.753Z,1520702158.753 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:15:59.158Z,1520702159.158 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:15:59.576Z,1520702159.576 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:15:59.974Z,1520702159.974 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:16:00.353Z,1520702160.353 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:16:00.754Z,1520702160.754 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:16:01.160Z,1520702161.160 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:16:01.564Z,1520702161.564 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:16:01.969Z,1520702161.969 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:16:02.359Z,1520702162.359 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:16:02.758Z,1520702162.758 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:16:03.163Z,1520702163.163 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:16:03.559Z,1520702163.559 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:16:03.962Z,1520702163.962 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:16:04.358Z,1520702164.358 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:16:04.760Z,1520702164.760 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:16:05.157Z,1520702165.157 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:16:08.420Z,1520702168.420 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:16:08.546Z,1520702168.546 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:16:08.925Z,1520702168.925 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:16:09.296Z,1520702169.296 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:16:09.705Z,1520702169.705 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:16:10.100Z,1520702170.100 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:16:10.496Z,1520702170.496 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:16:10.904Z,1520702170.904 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:16:11.300Z,1520702171.300 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:16:11.696Z,1520702171.696 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:16:12.104Z,1520702172.104 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:16:12.500Z,1520702172.500 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:16:12.904Z,1520702172.904 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:16:13.304Z,1520702173.304 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:16:13.721Z,1520702173.721 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:16:14.100Z,1520702174.100 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:16:14.504Z,1520702174.504 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:16:14.900Z,1520702174.900 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:16:15.300Z,1520702175.300 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:16:15.705Z,1520702175.705 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:16:16.100Z,1520702176.100 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:16:16.504Z,1520702176.504 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:16:16.904Z,1520702176.904 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:16:17.300Z,1520702177.300 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:16:17.696Z,1520702177.696 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:16:18.104Z,1520702178.104 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:16:18.508Z,1520702178.508 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:16:18.901Z,1520702178.901 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:16:19.309Z,1520702179.309 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:16:19.709Z,1520702179.709 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:16:20.109Z,1520702180.109 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:16:20.508Z,1520702180.508 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:16:20.904Z,1520702180.904 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:16:21.309Z,1520702181.309 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:16:21.706Z,1520702181.706 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:16:22.112Z,1520702182.112 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:16:22.496Z,1520702182.496 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:16:22.900Z,1520702182.900 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:16:23.302Z,1520702183.302 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:16:23.696Z,1520702183.696 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:16:24.104Z,1520702184.104 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:16:24.508Z,1520702184.508 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:16:24.901Z,1520702184.901 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:16:25.302Z,1520702185.302 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:16:25.701Z,1520702185.701 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:16:26.104Z,1520702186.104 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:16:26.500Z,1520702186.500 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:16:26.906Z,1520702186.906 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:16:27.301Z,1520702187.301 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:16:27.705Z,1520702187.705 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:16:28.100Z,1520702188.100 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:16:28.504Z,1520702188.504 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:16:28.898Z,1520702188.898 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:16:29.320Z,1520702189.320 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:16:29.700Z,1520702189.700 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:16:30.101Z,1520702190.101 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:16:30.503Z,1520702190.503 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:16:30.896Z,1520702190.896 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:16:31.300Z,1520702191.300 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:16:31.700Z,1520702191.700 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:16:32.096Z,1520702192.096 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:16:32.495Z,1520702192.495 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:16:32.899Z,1520702192.899 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:16:33.300Z,1520702193.300 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:16:33.700Z,1520702193.700 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:16:34.100Z,1520702194.100 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:16:34.500Z,1520702194.500 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:16:34.901Z,1520702194.901 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:16:35.312Z,1520702195.312 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:16:35.700Z,1520702195.700 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:16:36.097Z,1520702196.097 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:16:36.512Z,1520702196.512 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:16:36.905Z,1520702196.905 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:16:37.308Z,1520702197.308 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:16:37.709Z,1520702197.709 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:16:37.732Z,1520702197.732 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T17:16:37.733Z,1520702197.733 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 162
2018-03-10T17:16:37.733Z,1520702197.733 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-10T17:16:37.790Z,1520702197.790 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-10T17:16:38.112Z,1520702198.112 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:16:38.141Z,1520702198.141 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-10T17:16:38.141Z,1520702198.141 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 162
2018-03-10T17:16:38.508Z,1520702198.508 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:16:38.532Z,1520702198.532 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-10T17:16:38.532Z,1520702198.532 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-10T17:16:38.532Z,1520702198.532 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-10T17:16:38.904Z,1520702198.904 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:16:39.309Z,1520702199.309 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:16:39.707Z,1520702199.707 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:16:40.108Z,1520702200.108 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:16:40.504Z,1520702200.504 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:16:40.909Z,1520702200.909 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:16:41.308Z,1520702201.308 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:16:41.705Z,1520702201.705 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:16:42.100Z,1520702202.100 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:16:42.500Z,1520702202.500 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:16:42.900Z,1520702202.900 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:16:43.304Z,1520702203.304 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:16:43.709Z,1520702203.709 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:16:44.100Z,1520702204.100 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:16:44.500Z,1520702204.500 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:16:44.900Z,1520702204.900 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:16:45.304Z,1520702205.304 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:16:45.700Z,1520702205.700 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:16:46.116Z,1520702206.116 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:16:46.501Z,1520702206.501 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:16:46.900Z,1520702206.900 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:16:47.300Z,1520702207.300 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:16:47.700Z,1520702207.700 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:16:48.100Z,1520702208.100 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:16:48.505Z,1520702208.505 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:16:48.900Z,1520702208.900 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:16:49.294Z,1520702209.294 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:16:49.707Z,1520702209.707 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:16:50.108Z,1520702210.108 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:16:50.508Z,1520702210.508 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:16:50.906Z,1520702210.906 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:16:51.308Z,1520702211.308 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:16:51.707Z,1520702211.707 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:16:52.108Z,1520702212.108 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:16:52.508Z,1520702212.508 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:16:52.908Z,1520702212.908 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:16:53.318Z,1520702213.318 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:16:53.708Z,1520702213.708 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:16:54.104Z,1520702214.104 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:16:54.509Z,1520702214.509 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:16:54.904Z,1520702214.904 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:16:55.308Z,1520702215.308 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:16:55.712Z,1520702215.712 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:16:56.113Z,1520702216.113 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:16:56.496Z,1520702216.496 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:16:56.901Z,1520702216.901 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:16:57.297Z,1520702217.297 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:16:57.705Z,1520702217.705 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:16:58.102Z,1520702218.102 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:16:58.500Z,1520702218.500 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:16:58.900Z,1520702218.900 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:16:59.300Z,1520702219.300 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:16:59.700Z,1520702219.700 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:17:00.102Z,1520702220.102 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:17:00.500Z,1520702220.500 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:17:00.900Z,1520702220.900 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:17:01.296Z,1520702221.296 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:17:01.711Z,1520702221.711 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:17:02.111Z,1520702222.111 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:17:02.511Z,1520702222.511 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:17:02.909Z,1520702222.909 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:17:03.303Z,1520702223.303 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:17:03.705Z,1520702223.705 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:17:04.099Z,1520702224.099 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:17:04.499Z,1520702224.499 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:17:04.921Z,1520702224.921 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:17:05.300Z,1520702225.300 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:17:08.531Z,1520702228.531 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:17:08.617Z,1520702228.617 [CBIT](IMPORTANT): Beginning ground fault scan
2018-03-10T17:17:08.667Z,1520702228.667 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:17:09.060Z,1520702229.060 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:17:09.453Z,1520702229.453 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:17:09.862Z,1520702229.862 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:17:10.258Z,1520702230.258 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:17:10.654Z,1520702230.654 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:17:11.060Z,1520702231.060 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:17:11.462Z,1520702231.462 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:17:11.861Z,1520702231.861 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:17:12.263Z,1520702232.263 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:17:12.662Z,1520702232.662 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:17:13.048Z,1520702233.048 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:17:13.452Z,1520702233.452 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:17:13.854Z,1520702233.854 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:17:14.253Z,1520702234.253 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:17:14.658Z,1520702234.658 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:17:15.062Z,1520702235.062 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:17:15.460Z,1520702235.460 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:17:15.867Z,1520702235.867 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:17:16.266Z,1520702236.266 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:17:16.665Z,1520702236.665 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:17:17.067Z,1520702237.067 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:17:17.455Z,1520702237.455 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:17:17.850Z,1520702237.850 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:17:18.273Z,1520702238.273 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:17:18.673Z,1520702238.673 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:17:19.057Z,1520702239.057 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:17:19.145Z,1520702239.145 [CBIT](IMPORTANT): No ground fault detected
mA:
CHAN A0 (Batt): -0.007423
CHAN A1 (24V): -0.011234
CHAN A2 (12V): 0.000595
CHAN A3 (5V): -0.002018
CHAN B0 (3.3V): -0.001251
CHAN B1 (3.15aV): -0.001046
CHAN B2 (3.15bV): -0.000800
CHAN B3 (GND): -0.001940
OPEN: 0.003387
Full Scale Calc: 4.765 mA, -1.589 mA
2018-03-10T17:17:19.458Z,1520702239.458 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:17:19.858Z,1520702239.858 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:17:20.256Z,1520702240.256 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:17:20.664Z,1520702240.664 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:17:21.073Z,1520702241.073 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:17:21.456Z,1520702241.456 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:17:21.861Z,1520702241.861 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:17:22.259Z,1520702242.259 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:17:22.656Z,1520702242.656 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:17:23.055Z,1520702243.055 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:17:23.455Z,1520702243.455 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:17:23.857Z,1520702243.857 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:17:24.257Z,1520702244.257 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:17:24.656Z,1520702244.656 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:17:25.065Z,1520702245.065 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:17:25.459Z,1520702245.459 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:17:25.874Z,1520702245.874 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:17:26.248Z,1520702246.248 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:17:26.652Z,1520702246.652 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:17:27.057Z,1520702247.057 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:17:27.460Z,1520702247.460 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:17:27.866Z,1520702247.866 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:17:28.264Z,1520702248.264 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:17:28.665Z,1520702248.665 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:17:29.048Z,1520702249.048 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:17:29.456Z,1520702249.456 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:17:29.848Z,1520702249.848 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:17:30.260Z,1520702250.260 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:17:30.661Z,1520702250.661 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:17:31.056Z,1520702251.056 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:17:31.456Z,1520702251.456 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:17:31.861Z,1520702251.861 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:17:32.260Z,1520702252.260 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:17:32.652Z,1520702252.652 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:17:33.052Z,1520702253.052 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:17:33.452Z,1520702253.452 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:17:33.848Z,1520702253.848 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:17:34.256Z,1520702254.256 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:17:34.652Z,1520702254.652 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:17:35.052Z,1520702255.052 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:17:35.458Z,1520702255.458 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:17:35.861Z,1520702255.861 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:17:36.254Z,1520702256.254 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:17:36.660Z,1520702256.660 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:17:37.065Z,1520702257.065 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:17:37.456Z,1520702257.456 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:17:37.856Z,1520702257.856 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:17:38.265Z,1520702258.265 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:17:38.660Z,1520702258.660 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:17:39.051Z,1520702259.051 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:17:39.464Z,1520702259.464 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:17:39.852Z,1520702259.852 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:17:40.252Z,1520702260.252 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:17:40.656Z,1520702260.656 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:17:41.056Z,1520702261.056 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:17:41.457Z,1520702261.457 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:17:41.857Z,1520702261.857 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:17:42.259Z,1520702262.259 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:17:42.658Z,1520702262.658 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:17:43.056Z,1520702263.056 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:17:43.452Z,1520702263.452 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:17:43.852Z,1520702263.852 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:17:44.252Z,1520702264.252 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:17:44.648Z,1520702264.648 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:17:45.070Z,1520702265.070 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:17:45.456Z,1520702265.456 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:17:45.867Z,1520702265.867 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:17:46.259Z,1520702266.259 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:17:46.687Z,1520702266.687 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:17:47.051Z,1520702267.051 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:17:47.476Z,1520702267.476 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:17:47.854Z,1520702267.854 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:17:48.257Z,1520702268.257 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:17:48.657Z,1520702268.657 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:17:49.072Z,1520702269.072 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:17:49.462Z,1520702269.462 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:17:49.857Z,1520702269.857 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:17:50.255Z,1520702270.256 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:17:50.660Z,1520702270.660 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:17:51.061Z,1520702271.061 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:17:51.465Z,1520702271.465 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:17:51.857Z,1520702271.857 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:17:52.256Z,1520702272.256 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:17:52.662Z,1520702272.662 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:17:53.056Z,1520702273.056 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:17:53.461Z,1520702273.461 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:17:53.858Z,1520702273.858 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:17:54.265Z,1520702274.265 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:17:54.662Z,1520702274.662 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:17:55.079Z,1520702275.079 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:17:55.453Z,1520702275.453 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:17:55.853Z,1520702275.853 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:17:56.257Z,1520702276.257 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:17:56.665Z,1520702276.665 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:17:57.062Z,1520702277.062 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:17:57.456Z,1520702277.456 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:17:57.861Z,1520702277.861 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:17:58.261Z,1520702278.261 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:17:58.652Z,1520702278.652 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:17:59.052Z,1520702279.052 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:17:59.453Z,1520702279.453 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:17:59.848Z,1520702279.848 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:18:00.248Z,1520702280.248 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:18:00.648Z,1520702280.648 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:18:01.056Z,1520702281.056 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:18:01.448Z,1520702281.448 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:18:01.856Z,1520702281.856 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:18:02.252Z,1520702282.252 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:18:02.652Z,1520702282.652 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:18:03.056Z,1520702283.056 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:18:03.460Z,1520702283.460 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:18:03.861Z,1520702283.861 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:18:04.261Z,1520702284.261 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:18:04.660Z,1520702284.660 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:18:05.059Z,1520702285.059 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:18:05.460Z,1520702285.460 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:18:08.610Z,1520702288.610 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:18:08.748Z,1520702288.748 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:18:09.088Z,1520702289.088 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:18:09.489Z,1520702289.489 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:18:09.889Z,1520702289.889 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:18:10.294Z,1520702290.294 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:18:10.692Z,1520702290.692 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:18:11.076Z,1520702291.076 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:18:11.480Z,1520702291.480 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:18:11.876Z,1520702291.876 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:18:12.276Z,1520702292.276 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:18:12.680Z,1520702292.680 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:18:13.081Z,1520702293.081 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:18:13.480Z,1520702293.480 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:18:13.888Z,1520702293.888 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:18:14.285Z,1520702294.285 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:18:14.687Z,1520702294.687 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:18:15.111Z,1520702295.111 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:18:15.484Z,1520702295.484 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:18:15.890Z,1520702295.890 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:18:16.288Z,1520702296.288 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:18:16.700Z,1520702296.700 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:18:17.080Z,1520702297.080 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:18:17.480Z,1520702297.480 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:18:17.881Z,1520702297.881 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:18:18.288Z,1520702298.288 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:18:18.697Z,1520702298.697 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:18:19.076Z,1520702299.076 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:18:19.481Z,1520702299.481 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:18:19.880Z,1520702299.880 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:18:20.288Z,1520702300.288 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:18:20.688Z,1520702300.688 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:18:21.088Z,1520702301.088 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:18:21.485Z,1520702301.485 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:18:21.885Z,1520702301.885 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:18:22.289Z,1520702302.289 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:18:22.690Z,1520702302.690 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:18:23.092Z,1520702303.092 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:18:23.492Z,1520702303.492 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:18:23.880Z,1520702303.880 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:18:24.280Z,1520702304.280 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:18:24.685Z,1520702304.685 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:18:25.077Z,1520702305.077 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:18:25.486Z,1520702305.486 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:18:25.888Z,1520702305.888 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:18:26.281Z,1520702306.281 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:18:26.687Z,1520702306.687 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:18:27.086Z,1520702307.086 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:18:27.492Z,1520702307.492 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:18:27.886Z,1520702307.886 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:18:28.284Z,1520702308.284 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:18:28.676Z,1520702308.676 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:18:29.081Z,1520702309.081 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:18:29.481Z,1520702309.481 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:18:29.876Z,1520702309.876 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:18:30.293Z,1520702310.293 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:18:30.697Z,1520702310.697 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:18:31.077Z,1520702311.077 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:18:31.481Z,1520702311.481 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:18:31.881Z,1520702311.881 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:18:32.285Z,1520702312.285 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:18:32.681Z,1520702312.681 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:18:33.084Z,1520702313.084 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:18:33.480Z,1520702313.480 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:18:33.884Z,1520702313.884 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:18:34.285Z,1520702314.285 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:18:34.684Z,1520702314.684 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:18:35.089Z,1520702315.089 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:18:35.486Z,1520702315.486 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:18:35.888Z,1520702315.888 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:18:36.284Z,1520702316.284 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:18:36.686Z,1520702316.686 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:18:37.090Z,1520702317.090 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:18:37.485Z,1520702317.485 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:18:37.889Z,1520702317.889 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:18:38.277Z,1520702318.277 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:18:38.693Z,1520702318.693 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:18:39.095Z,1520702319.095 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:18:39.476Z,1520702319.476 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:18:39.876Z,1520702319.876 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:18:40.280Z,1520702320.280 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:18:40.676Z,1520702320.676 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:18:41.078Z,1520702321.078 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:18:41.480Z,1520702321.480 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:18:41.884Z,1520702321.884 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:18:42.289Z,1520702322.289 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:18:42.690Z,1520702322.690 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:18:43.088Z,1520702323.088 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:18:43.492Z,1520702323.492 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:18:43.893Z,1520702323.893 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:18:44.288Z,1520702324.288 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:18:44.688Z,1520702324.688 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:18:45.084Z,1520702325.084 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:18:45.492Z,1520702325.492 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:18:45.881Z,1520702325.881 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:18:46.283Z,1520702326.283 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:18:46.684Z,1520702326.684 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:18:47.080Z,1520702327.080 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:18:47.488Z,1520702327.488 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:18:47.889Z,1520702327.889 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:18:48.288Z,1520702328.288 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:18:48.688Z,1520702328.688 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:18:49.088Z,1520702329.088 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:18:49.488Z,1520702329.488 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:18:49.886Z,1520702329.886 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:18:50.283Z,1520702330.283 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:18:50.689Z,1520702330.689 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:18:51.092Z,1520702331.092 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:18:51.488Z,1520702331.488 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:18:51.891Z,1520702331.891 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:18:52.286Z,1520702332.286 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:18:52.690Z,1520702332.690 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:18:53.078Z,1520702333.078 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:18:53.493Z,1520702333.493 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:18:53.880Z,1520702333.880 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:18:54.276Z,1520702334.276 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:18:54.680Z,1520702334.680 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:18:55.080Z,1520702335.080 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:18:55.481Z,1520702335.481 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:18:55.884Z,1520702335.884 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:18:56.279Z,1520702336.279 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:18:56.684Z,1520702336.684 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:18:57.084Z,1520702337.084 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:18:57.481Z,1520702337.481 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:18:57.888Z,1520702337.888 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:18:58.290Z,1520702338.290 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:18:58.689Z,1520702338.689 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:18:59.080Z,1520702339.080 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:18:59.480Z,1520702339.480 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:18:59.876Z,1520702339.876 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:19:00.281Z,1520702340.281 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:19:00.682Z,1520702340.682 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:19:01.084Z,1520702341.084 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:19:01.492Z,1520702341.492 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:19:01.887Z,1520702341.887 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:19:02.290Z,1520702342.290 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:19:02.689Z,1520702342.689 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:19:03.088Z,1520702343.088 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:19:03.488Z,1520702343.488 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:19:03.887Z,1520702343.887 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:19:04.288Z,1520702344.288 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:19:04.688Z,1520702344.688 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:19:05.093Z,1520702345.093 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:19:05.486Z,1520702345.486 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:19:08.814Z,1520702348.814 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:19:08.921Z,1520702348.921 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:19:09.322Z,1520702349.322 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:19:09.720Z,1520702349.720 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:19:10.120Z,1520702350.120 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:19:10.519Z,1520702350.519 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:19:10.921Z,1520702350.921 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:19:11.316Z,1520702351.316 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:19:11.729Z,1520702351.729 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:19:12.120Z,1520702352.120 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:19:12.520Z,1520702352.520 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:19:12.930Z,1520702352.930 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:19:13.321Z,1520702353.321 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:19:13.716Z,1520702353.716 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:19:14.129Z,1520702354.129 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:19:14.512Z,1520702354.512 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:19:14.910Z,1520702354.910 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:19:15.332Z,1520702355.332 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:19:15.712Z,1520702355.712 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:19:16.108Z,1520702356.108 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:19:16.512Z,1520702356.512 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:19:16.908Z,1520702356.908 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:19:17.310Z,1520702357.310 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:19:17.712Z,1520702357.712 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:19:18.112Z,1520702358.112 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:19:18.510Z,1520702358.510 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:19:18.917Z,1520702358.917 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:19:19.319Z,1520702359.319 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:19:19.724Z,1520702359.724 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:19:20.117Z,1520702360.117 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:19:20.517Z,1520702360.517 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:19:20.917Z,1520702360.917 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:19:21.317Z,1520702361.317 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:19:21.713Z,1520702361.713 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:19:22.121Z,1520702362.121 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:19:22.513Z,1520702362.513 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:19:22.912Z,1520702362.912 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:19:23.312Z,1520702363.312 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:19:23.712Z,1520702363.712 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:19:24.108Z,1520702364.108 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:19:24.520Z,1520702364.520 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:19:24.924Z,1520702364.924 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:19:25.315Z,1520702365.315 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:19:25.721Z,1520702365.721 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:19:26.132Z,1520702366.132 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:19:26.509Z,1520702366.509 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:19:26.912Z,1520702366.912 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:19:27.328Z,1520702367.328 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:19:27.723Z,1520702367.723 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:19:28.121Z,1520702368.121 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:19:28.520Z,1520702368.520 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:19:28.916Z,1520702368.916 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:19:29.317Z,1520702369.317 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:19:29.720Z,1520702369.720 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:19:30.120Z,1520702370.120 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:19:30.521Z,1520702370.521 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:19:30.925Z,1520702370.925 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:19:31.324Z,1520702371.324 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:19:31.721Z,1520702371.721 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:19:32.130Z,1520702372.130 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:19:32.521Z,1520702372.521 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:19:32.912Z,1520702372.912 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:19:33.313Z,1520702373.313 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:19:33.712Z,1520702373.712 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:19:34.124Z,1520702374.124 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:19:34.532Z,1520702374.532 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:19:34.912Z,1520702374.912 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:19:35.316Z,1520702375.316 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:19:35.712Z,1520702375.712 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:19:36.133Z,1520702376.133 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:19:36.517Z,1520702376.517 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:19:36.913Z,1520702376.913 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:19:37.313Z,1520702377.313 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:19:37.717Z,1520702377.717 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:19:38.113Z,1520702378.113 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:19:38.512Z,1520702378.512 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:19:38.553Z,1520702378.553 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T17:19:38.553Z,1520702378.553 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 163
2018-03-10T17:19:38.553Z,1520702378.553 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-10T17:19:38.573Z,1520702378.573 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-10T17:19:38.924Z,1520702378.924 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:19:38.967Z,1520702378.967 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-10T17:19:38.967Z,1520702378.967 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 163
2018-03-10T17:19:39.312Z,1520702379.312 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:19:39.362Z,1520702379.362 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-10T17:19:39.367Z,1520702379.367 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-10T17:19:39.368Z,1520702379.368 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-10T17:19:39.717Z,1520702379.717 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:19:40.114Z,1520702380.114 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:19:40.520Z,1520702380.520 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:19:40.917Z,1520702380.917 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:19:41.316Z,1520702381.316 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:19:41.719Z,1520702381.719 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:19:42.116Z,1520702382.116 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:19:42.516Z,1520702382.516 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:19:42.921Z,1520702382.921 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:19:43.316Z,1520702383.316 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:19:43.716Z,1520702383.716 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:19:44.120Z,1520702384.120 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:19:44.524Z,1520702384.524 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:19:44.921Z,1520702384.921 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:19:45.329Z,1520702385.329 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:19:45.720Z,1520702385.720 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:19:46.120Z,1520702386.120 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:19:46.520Z,1520702386.520 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:19:46.920Z,1520702386.920 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:19:47.319Z,1520702387.319 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:19:47.728Z,1520702387.728 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:19:48.116Z,1520702388.116 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:19:48.520Z,1520702388.520 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:19:48.920Z,1520702388.920 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:19:49.320Z,1520702389.320 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:19:49.720Z,1520702389.720 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:19:50.114Z,1520702390.114 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:19:50.525Z,1520702390.525 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:19:50.908Z,1520702390.908 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:19:51.312Z,1520702391.312 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:19:51.712Z,1520702391.712 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:19:52.108Z,1520702392.108 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:19:52.533Z,1520702392.533 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:19:52.912Z,1520702392.912 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:19:53.308Z,1520702393.308 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:19:53.708Z,1520702393.708 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:19:54.116Z,1520702394.116 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:19:54.510Z,1520702394.510 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:19:54.912Z,1520702394.912 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:19:55.320Z,1520702395.320 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:19:55.713Z,1520702395.713 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:19:56.117Z,1520702396.117 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:19:56.520Z,1520702396.520 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:19:56.917Z,1520702396.917 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:19:57.321Z,1520702397.321 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:19:57.720Z,1520702397.720 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:19:58.119Z,1520702398.119 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:19:58.520Z,1520702398.520 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:19:58.917Z,1520702398.917 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:19:59.322Z,1520702399.322 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:19:59.718Z,1520702399.718 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:20:00.120Z,1520702400.120 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:20:00.520Z,1520702400.520 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:20:00.920Z,1520702400.920 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:20:01.320Z,1520702401.320 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:20:01.716Z,1520702401.716 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:20:02.119Z,1520702402.119 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:20:02.518Z,1520702402.518 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:20:02.920Z,1520702402.920 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:20:03.320Z,1520702403.320 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:20:03.718Z,1520702403.718 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:20:04.121Z,1520702404.121 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:20:04.532Z,1520702404.532 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:20:04.924Z,1520702404.924 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:20:04.948Z,1520702404.948 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-03-10T17:20:04.949Z,1520702404.949 [Default:CheckIn:C.Wait] Stopped
2018-03-10T17:20:04.949Z,1520702404.949 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-03-10T17:20:04.949Z,1520702404.949 [Default:CheckIn:D] Running Loop=1
2018-03-10T17:20:05.312Z,1520702405.312 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:20:05.349Z,1520702405.349 [Default:CheckIn:D] Stopped
2018-03-10T17:20:05.349Z,1520702405.349 [Default:CheckIn:E] Running Loop=1
2018-03-10T17:20:05.711Z,1520702405.711 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:20:05.750Z,1520702405.750 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 720.790495 min 
2018-03-10T17:20:05.750Z,1520702405.750 [Default:CheckIn:E] Stopped
2018-03-10T17:20:05.750Z,1520702405.750 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-03-10T17:20:05.750Z,1520702405.750 [Default:CheckIn] Stopped
2018-03-10T17:20:05.750Z,1520702405.750 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-03-10T17:20:05.750Z,1520702405.750 [Default:CheckIn](INFO): Running loop #71
2018-03-10T17:20:05.751Z,1520702405.751 [Default:CheckIn] Running Loop=71
2018-03-10T17:20:05.751Z,1520702405.751 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-03-10T17:20:05.751Z,1520702405.751 [Default:CheckIn:Read_GPS] Running Loop=1
2018-03-10T17:20:08.894Z,1520702408.894 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:20:08.994Z,1520702408.994 [NAL9602](INFO): Powering up
2018-03-10T17:20:09.010Z,1520702409.010 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:20:09.405Z,1520702409.405 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:20:09.804Z,1520702409.804 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:20:10.206Z,1520702410.206 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:20:10.599Z,1520702410.599 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:20:10.998Z,1520702410.998 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:20:11.394Z,1520702411.394 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:20:11.796Z,1520702411.796 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:20:12.199Z,1520702412.199 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:20:12.598Z,1520702412.598 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:20:12.995Z,1520702412.995 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:20:13.404Z,1520702413.404 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:20:13.799Z,1520702413.799 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:20:14.193Z,1520702414.193 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:20:14.601Z,1520702414.601 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:20:14.988Z,1520702414.988 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:20:15.394Z,1520702415.394 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:20:15.791Z,1520702415.791 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:20:16.192Z,1520702416.192 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:20:16.589Z,1520702416.589 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:20:17.005Z,1520702417.005 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:20:17.391Z,1520702417.391 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:20:17.796Z,1520702417.796 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:20:18.199Z,1520702418.199 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:20:18.596Z,1520702418.596 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:20:19.001Z,1520702419.001 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:20:19.401Z,1520702419.401 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:20:19.805Z,1520702419.805 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:20:20.172Z,1520702420.172 [NAL9602](INFO): NAL9602 initialized
2018-03-10T17:20:20.200Z,1520702420.200 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:20:20.591Z,1520702420.591 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:20:21.012Z,1520702421.012 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:20:21.409Z,1520702421.409 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:20:21.808Z,1520702421.808 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:20:22.192Z,1520702422.192 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:20:22.593Z,1520702422.593 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:20:23.001Z,1520702423.001 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:20:23.396Z,1520702423.396 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:20:23.801Z,1520702423.801 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:20:24.197Z,1520702424.197 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:20:24.599Z,1520702424.599 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:20:24.000Z,1520702425.000 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:20:25.399Z,1520702425.399 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:20:25.799Z,1520702425.799 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:20:26.198Z,1520702426.198 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:20:26.597Z,1520702426.597 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:20:26.997Z,1520702426.997 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:20:27.391Z,1520702427.391 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:20:27.805Z,1520702427.805 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:20:28.199Z,1520702428.199 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:20:28.599Z,1520702428.599 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:20:29.004Z,1520702429.004 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:20:29.389Z,1520702429.389 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:20:29.790Z,1520702429.790 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:20:30.191Z,1520702430.191 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:20:30.589Z,1520702430.589 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:20:30.989Z,1520702430.989 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:20:31.390Z,1520702431.390 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:20:31.791Z,1520702431.791 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:20:32.192Z,1520702432.192 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:20:32.589Z,1520702432.589 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:20:32.995Z,1520702432.995 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:20:33.397Z,1520702433.397 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:20:33.796Z,1520702433.796 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:20:34.199Z,1520702434.199 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:20:34.600Z,1520702434.600 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:20:34.997Z,1520702434.997 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:20:35.397Z,1520702435.397 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:20:35.804Z,1520702435.804 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:20:36.200Z,1520702436.200 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:20:36.599Z,1520702436.599 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:20:36.997Z,1520702436.997 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:20:37.402Z,1520702437.402 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:20:37.800Z,1520702437.800 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:20:38.199Z,1520702438.199 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:20:38.600Z,1520702438.600 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:20:39.000Z,1520702439.000 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:20:39.399Z,1520702439.399 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:20:39.798Z,1520702439.798 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:20:40.206Z,1520702440.206 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:20:40.599Z,1520702440.599 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:20:40.999Z,1520702440.999 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:20:41.404Z,1520702441.404 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:20:41.801Z,1520702441.801 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:20:42.208Z,1520702442.208 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:20:42.611Z,1520702442.611 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:20:42.991Z,1520702442.991 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:20:43.388Z,1520702443.388 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:20:43.805Z,1520702443.805 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:20:44.200Z,1520702444.200 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:20:44.590Z,1520702444.590 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:20:45.003Z,1520702445.003 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:20:45.408Z,1520702445.408 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:20:45.786Z,1520702445.786 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:20:46.204Z,1520702446.204 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:20:46.605Z,1520702446.605 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:20:46.988Z,1520702446.988 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:20:47.404Z,1520702447.404 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:20:47.799Z,1520702447.799 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:20:48.192Z,1520702448.192 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:20:48.594Z,1520702448.594 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:20:48.991Z,1520702448.991 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:20:49.391Z,1520702449.391 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:20:49.788Z,1520702449.788 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:20:50.189Z,1520702450.189 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:20:50.590Z,1520702450.590 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:20:51.011Z,1520702451.011 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:20:51.397Z,1520702451.397 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:20:51.788Z,1520702451.788 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:20:52.172Z,1520702452.172 [NAL9602](ERROR): Failed to receive proper response when querying signal strength for MT queue check.
2018-03-10T17:20:52.251Z,1520702452.251 [NAL9602](FAULT): received: 
+CSQ:1

OK36, 2, 0, 0, 0

OK
2018-03-10T17:20:52.251Z,1520702452.251 [NAL9602] Data Fault, FailCount= 2
2018-03-10T17:20:52.251Z,1520702452.251 [NAL9602](ERROR): Data Fault
2018-03-10T17:20:52.269Z,1520702452.269 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:20:52.372Z,1520702452.372 [CBIT](ERROR): Data Fault in component: NAL9602
2018-03-10T17:20:52.573Z,1520702452.573 [NAL9602](INFO): Powering down
2018-03-10T17:20:52.592Z,1520702452.592 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:20:52.996Z,1520702452.996 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:20:53.399Z,1520702453.399 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:20:53.462Z,1520702453.462 [CBIT](INFO): Clearing failed state for component NAL9602
2018-03-10T17:20:53.462Z,1520702453.462 [NAL9602] No Fault, FailCount= 2
2018-03-10T17:20:53.799Z,1520702453.799 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:20:54.199Z,1520702454.199 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:20:54.598Z,1520702454.598 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:20:55.004Z,1520702455.004 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:20:55.402Z,1520702455.402 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:20:55.806Z,1520702455.806 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:20:56.197Z,1520702456.197 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:20:56.588Z,1520702456.588 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:20:56.996Z,1520702456.996 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:20:57.408Z,1520702457.408 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:20:57.788Z,1520702457.788 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:20:58.188Z,1520702458.188 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:20:58.609Z,1520702458.609 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:20:58.987Z,1520702458.987 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:20:59.387Z,1520702459.388 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:20:59.794Z,1520702459.794 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:21:00.205Z,1520702460.205 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:21:00.587Z,1520702460.587 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:21:00.992Z,1520702460.992 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:21:01.387Z,1520702461.387 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:21:01.786Z,1520702461.786 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:21:02.190Z,1520702462.190 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:21:02.588Z,1520702462.588 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:21:02.994Z,1520702462.994 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:21:03.411Z,1520702463.411 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:21:03.790Z,1520702463.790 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:21:04.189Z,1520702464.189 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:21:04.594Z,1520702464.594 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:21:04.990Z,1520702464.990 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:21:05.394Z,1520702465.394 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:21:05.796Z,1520702465.796 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:21:09.015Z,1520702469.015 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:21:09.140Z,1520702469.140 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:21:09.497Z,1520702469.497 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:21:09.891Z,1520702469.891 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:21:10.293Z,1520702470.293 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:21:10.698Z,1520702470.698 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:21:11.088Z,1520702471.088 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:21:11.488Z,1520702471.488 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:21:11.887Z,1520702471.887 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:21:12.296Z,1520702472.296 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:21:12.693Z,1520702472.693 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:21:13.091Z,1520702473.091 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:21:13.492Z,1520702473.492 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:21:13.880Z,1520702473.880 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:21:14.304Z,1520702474.304 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:21:14.684Z,1520702474.684 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:21:15.084Z,1520702475.084 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:21:15.485Z,1520702475.485 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:21:15.884Z,1520702475.884 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:21:16.288Z,1520702476.288 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:21:16.684Z,1520702476.684 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:21:17.080Z,1520702477.080 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:21:17.484Z,1520702477.484 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:21:17.884Z,1520702477.884 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:21:18.288Z,1520702478.288 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:21:18.692Z,1520702478.692 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:21:19.093Z,1520702479.093 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:21:19.493Z,1520702479.493 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:21:19.892Z,1520702479.892 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:21:20.292Z,1520702480.292 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:21:20.696Z,1520702480.696 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:21:21.096Z,1520702481.096 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:21:21.492Z,1520702481.492 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:21:21.893Z,1520702481.893 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:21:22.297Z,1520702482.297 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:21:22.669Z,1520702482.669 [NAL9602](INFO): Powering up NAL9602
2018-03-10T17:21:22.692Z,1520702482.692 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:21:23.080Z,1520702483.080 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:21:23.484Z,1520702483.484 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:21:23.889Z,1520702483.889 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:21:24.292Z,1520702484.292 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:21:24.693Z,1520702484.693 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:21:25.094Z,1520702485.094 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:21:25.494Z,1520702485.494 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:21:25.895Z,1520702485.895 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:21:26.296Z,1520702486.296 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:21:26.687Z,1520702486.687 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:21:27.088Z,1520702487.088 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:21:27.483Z,1520702487.483 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:21:27.884Z,1520702487.884 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:21:28.284Z,1520702488.284 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:21:28.684Z,1520702488.684 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:21:29.084Z,1520702489.084 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:21:29.480Z,1520702489.480 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:21:29.887Z,1520702489.887 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:21:30.289Z,1520702490.289 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:21:30.689Z,1520702490.689 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:21:31.092Z,1520702491.092 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:21:31.492Z,1520702491.492 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:21:31.886Z,1520702491.886 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:21:32.290Z,1520702492.290 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:21:32.690Z,1520702492.690 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:21:33.102Z,1520702493.102 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:21:33.468Z,1520702493.468 [NAL9602](INFO): NAL9602 initialized
2018-03-10T17:21:33.494Z,1520702493.494 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:21:33.892Z,1520702493.892 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:21:34.300Z,1520702494.300 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:21:34.717Z,1520702494.717 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:21:35.111Z,1520702495.111 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:21:35.481Z,1520702495.481 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:21:35.885Z,1520702495.885 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:21:36.284Z,1520702496.284 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:21:36.700Z,1520702496.700 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:21:37.100Z,1520702497.100 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:21:37.481Z,1520702497.481 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:21:37.881Z,1520702497.881 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:21:38.284Z,1520702498.284 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:21:38.689Z,1520702498.689 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:21:39.085Z,1520702499.085 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:21:39.492Z,1520702499.492 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:21:39.897Z,1520702499.897 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:21:40.293Z,1520702500.293 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:21:40.693Z,1520702500.693 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:21:41.087Z,1520702501.087 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:21:41.517Z,1520702501.517 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:21:41.914Z,1520702501.914 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:21:42.297Z,1520702502.297 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:21:42.691Z,1520702502.691 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:21:43.092Z,1520702503.092 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:21:43.490Z,1520702503.490 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:21:43.891Z,1520702503.891 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:21:44.292Z,1520702504.292 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:21:44.694Z,1520702504.694 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:21:45.082Z,1520702505.082 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:21:45.486Z,1520702505.486 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:21:45.925Z,1520702505.925 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:21:46.305Z,1520702506.305 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:21:46.685Z,1520702506.685 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:21:47.081Z,1520702507.081 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:21:47.483Z,1520702507.483 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:21:47.885Z,1520702507.885 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:21:48.289Z,1520702508.289 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:21:48.690Z,1520702508.690 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:21:49.089Z,1520702509.089 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:21:49.493Z,1520702509.493 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:21:49.890Z,1520702509.890 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:21:50.302Z,1520702510.302 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:21:50.710Z,1520702510.710 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:21:51.097Z,1520702511.097 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:21:51.491Z,1520702511.491 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:21:51.880Z,1520702511.880 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:21:52.285Z,1520702512.285 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:21:52.685Z,1520702512.685 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:21:53.085Z,1520702513.085 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:21:53.493Z,1520702513.493 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:21:53.890Z,1520702513.890 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:21:54.299Z,1520702514.299 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:21:54.690Z,1520702514.690 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:21:55.088Z,1520702515.088 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:21:55.493Z,1520702515.493 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:21:55.893Z,1520702515.893 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:21:56.287Z,1520702516.287 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:21:56.681Z,1520702516.681 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:21:57.096Z,1520702517.096 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:21:57.484Z,1520702517.484 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:21:57.889Z,1520702517.889 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:21:58.282Z,1520702518.282 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:21:58.688Z,1520702518.688 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:21:59.080Z,1520702519.080 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:21:59.482Z,1520702519.482 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:21:59.884Z,1520702519.884 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:22:00.292Z,1520702520.292 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:22:00.688Z,1520702520.688 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:22:01.090Z,1520702521.090 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:22:01.489Z,1520702521.489 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:22:01.893Z,1520702521.893 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:22:02.296Z,1520702522.296 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:22:02.694Z,1520702522.694 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:22:03.093Z,1520702523.093 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:22:03.488Z,1520702523.488 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:22:03.897Z,1520702523.897 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:22:04.281Z,1520702524.281 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:22:04.694Z,1520702524.694 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:22:05.069Z,1520702525.069 [NAL9602](INFO): SBD MO Status=0, MOMSN=5836, MT Status=0, MTMSN=0
2018-03-10T17:22:05.070Z,1520702525.070 [NAL9602](INFO): No messages in MT queue
2018-03-10T17:22:05.100Z,1520702525.100 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:22:05.485Z,1520702525.485 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:22:05.909Z,1520702525.909 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:22:09.215Z,1520702529.215 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:22:09.377Z,1520702529.377 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:22:09.749Z,1520702529.749 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:22:10.146Z,1520702530.146 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:22:10.545Z,1520702530.545 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:22:10.964Z,1520702530.964 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:22:11.371Z,1520702531.371 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:22:11.769Z,1520702531.769 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:22:12.149Z,1520702532.149 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:22:12.545Z,1520702532.545 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:22:12.943Z,1520702532.943 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:22:13.368Z,1520702533.368 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:22:13.744Z,1520702533.744 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:22:14.152Z,1520702534.152 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:22:14.573Z,1520702534.573 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:22:14.955Z,1520702534.955 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:22:15.338Z,1520702535.338 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:22:15.745Z,1520702535.745 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:22:16.151Z,1520702536.151 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:22:16.549Z,1520702536.549 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:22:16.963Z,1520702536.963 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:22:17.363Z,1520702537.363 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:22:17.765Z,1520702537.765 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:22:18.149Z,1520702538.149 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:22:18.549Z,1520702538.549 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:22:18.953Z,1520702538.953 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:22:19.356Z,1520702539.356 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:22:19.753Z,1520702539.753 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:22:20.158Z,1520702540.158 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:22:20.562Z,1520702540.562 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:22:20.962Z,1520702540.962 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:22:21.353Z,1520702541.353 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:22:21.744Z,1520702541.744 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:22:22.146Z,1520702542.146 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:22:22.541Z,1520702542.541 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:22:22.967Z,1520702542.967 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:22:23.367Z,1520702543.367 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:22:23.767Z,1520702543.767 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:22:24.145Z,1520702544.145 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:22:24.549Z,1520702544.549 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:22:24.942Z,1520702544.942 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:22:25.345Z,1520702545.345 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:22:25.744Z,1520702545.744 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:22:26.163Z,1520702546.163 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:22:26.578Z,1520702546.578 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:22:26.963Z,1520702546.963 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:22:27.350Z,1520702547.350 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:22:27.756Z,1520702547.756 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:22:28.156Z,1520702548.156 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:22:28.554Z,1520702548.554 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:22:28.958Z,1520702548.958 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:22:29.362Z,1520702549.362 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:22:29.756Z,1520702549.756 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:22:30.147Z,1520702550.147 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:22:30.558Z,1520702550.558 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:22:30.945Z,1520702550.945 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:22:31.350Z,1520702551.350 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:22:31.745Z,1520702551.745 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:22:32.171Z,1520702552.171 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:22:32.578Z,1520702552.578 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:22:32.968Z,1520702552.968 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:22:33.349Z,1520702553.349 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:22:33.745Z,1520702553.745 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:22:34.158Z,1520702554.158 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:22:34.538Z,1520702554.538 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:22:34.956Z,1520702554.956 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:22:35.359Z,1520702555.359 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:22:35.756Z,1520702555.756 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:22:36.145Z,1520702556.145 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:22:36.553Z,1520702556.553 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:22:36.944Z,1520702556.944 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:22:37.352Z,1520702557.352 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:22:37.752Z,1520702557.752 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:22:38.167Z,1520702558.167 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:22:38.560Z,1520702558.560 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:22:38.975Z,1520702558.975 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:22:39.350Z,1520702559.350 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:22:39.376Z,1520702559.376 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T17:22:39.376Z,1520702559.376 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 164
2018-03-10T17:22:39.376Z,1520702559.376 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-10T17:22:39.409Z,1520702559.409 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-10T17:22:39.748Z,1520702559.748 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:22:39.805Z,1520702559.805 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-10T17:22:39.806Z,1520702559.806 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 164
2018-03-10T17:22:40.170Z,1520702560.170 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:22:40.212Z,1520702560.212 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-10T17:22:40.212Z,1520702560.212 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-10T17:22:40.212Z,1520702560.212 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-10T17:22:40.541Z,1520702560.541 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:22:40.964Z,1520702560.964 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:22:41.372Z,1520702561.372 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:22:41.774Z,1520702561.774 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:22:42.145Z,1520702562.145 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:22:42.549Z,1520702562.549 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:22:42.949Z,1520702562.949 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:22:43.351Z,1520702563.351 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:22:43.749Z,1520702563.749 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:22:44.152Z,1520702564.152 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:22:44.575Z,1520702564.575 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:22:44.972Z,1520702564.972 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:22:45.350Z,1520702565.350 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:22:45.757Z,1520702565.757 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:22:46.152Z,1520702566.152 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:22:46.549Z,1520702566.549 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:22:46.967Z,1520702566.967 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:22:47.367Z,1520702567.367 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:22:47.760Z,1520702567.760 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:22:48.155Z,1520702568.155 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:22:48.551Z,1520702568.551 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:22:48.948Z,1520702568.948 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:22:49.351Z,1520702569.351 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:22:49.759Z,1520702569.759 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:22:50.167Z,1520702570.167 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:22:50.571Z,1520702570.571 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:22:50.969Z,1520702570.969 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:22:51.341Z,1520702571.341 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:22:51.767Z,1520702571.767 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:22:51.775Z,1520702571.775 [BPC1](ERROR): Failed to receive battery data
2018-03-10T17:22:51.775Z,1520702571.775 [BPC1] Communications Fault, FailCount= 1
2018-03-10T17:22:51.776Z,1520702571.776 [BPC1](ERROR): Communications Fault
2018-03-10T17:22:51.827Z,1520702571.827 [CBIT](ERROR): Communications Fault in component: BPC1
2018-03-10T17:22:52.170Z,1520702572.170 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:22:52.545Z,1520702572.545 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:22:52.956Z,1520702572.956 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:22:53.002Z,1520702573.002 [CBIT](INFO): Clearing failed state for component BPC1
2018-03-10T17:22:53.002Z,1520702573.002 [BPC1] No Fault, FailCount= 1
2018-03-10T17:22:53.370Z,1520702573.370 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:22:53.756Z,1520702573.756 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:22:54.145Z,1520702574.145 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:22:54.549Z,1520702574.549 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:22:54.949Z,1520702574.949 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:22:55.354Z,1520702575.354 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:22:55.748Z,1520702575.748 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:22:56.166Z,1520702576.166 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:22:56.567Z,1520702576.567 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:22:56.955Z,1520702576.955 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:22:57.356Z,1520702577.356 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:22:57.757Z,1520702577.757 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:22:58.156Z,1520702578.156 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:22:58.552Z,1520702578.552 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:22:58.964Z,1520702578.964 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:22:59.365Z,1520702579.365 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:22:59.760Z,1520702579.760 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:23:00.144Z,1520702580.144 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:23:00.544Z,1520702580.544 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:23:00.941Z,1520702580.941 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:23:01.346Z,1520702581.346 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:23:01.748Z,1520702581.748 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:23:02.170Z,1520702582.170 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:23:02.568Z,1520702582.568 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:23:02.955Z,1520702582.955 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:23:03.345Z,1520702583.345 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:23:03.748Z,1520702583.748 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:23:04.146Z,1520702584.146 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:23:04.544Z,1520702584.544 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:23:04.963Z,1520702584.963 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:23:05.363Z,1520702585.363 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:23:05.780Z,1520702585.780 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:23:06.159Z,1520702586.159 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:23:09.315Z,1520702589.315 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:23:09.443Z,1520702589.443 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:23:09.811Z,1520702589.811 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:23:10.202Z,1520702590.202 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:23:10.615Z,1520702590.615 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:23:11.004Z,1520702591.004 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:23:11.400Z,1520702591.400 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:23:11.804Z,1520702591.804 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:23:12.199Z,1520702592.199 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:23:12.601Z,1520702592.601 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:23:13.009Z,1520702593.009 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:23:13.410Z,1520702593.410 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:23:13.812Z,1520702593.812 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:23:14.204Z,1520702594.204 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:23:14.603Z,1520702594.603 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:23:14.989Z,1520702594.989 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:23:15.405Z,1520702595.405 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:23:15.810Z,1520702595.810 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:23:16.209Z,1520702596.209 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:23:16.615Z,1520702596.615 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:23:16.993Z,1520702596.993 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:23:17.389Z,1520702597.389 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:23:17.791Z,1520702597.791 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:23:18.193Z,1520702598.193 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:23:18.588Z,1520702598.588 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:23:19.014Z,1520702599.014 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:23:19.408Z,1520702599.408 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:23:19.813Z,1520702599.813 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:23:20.193Z,1520702600.193 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:23:20.589Z,1520702600.589 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:23:20.992Z,1520702600.992 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:23:21.395Z,1520702601.395 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:23:21.815Z,1520702601.815 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:23:22.218Z,1520702602.218 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:23:22.608Z,1520702602.608 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:23:22.992Z,1520702602.992 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:23:23.393Z,1520702603.393 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:23:23.789Z,1520702603.789 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:23:23.818Z,1520702603.818 [BPC1](FAULT): Failed to initialize
2018-03-10T17:23:23.818Z,1520702603.818 [BPC1] Communications Fault, FailCount= 2
2018-03-10T17:23:23.818Z,1520702603.818 [BPC1](ERROR): Communications Fault
2018-03-10T17:23:23.848Z,1520702603.848 [CBIT](ERROR): Communications Fault in component: BPC1
2018-03-10T17:23:24.218Z,1520702604.218 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:23:24.600Z,1520702604.600 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:23:25.004Z,1520702605.004 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:23:25.047Z,1520702605.047 [CBIT](INFO): Clearing failed state for component BPC1
2018-03-10T17:23:25.047Z,1520702605.047 [BPC1] No Fault, FailCount= 2
2018-03-10T17:23:25.416Z,1520702605.416 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:23:25.810Z,1520702605.810 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:23:26.198Z,1520702606.198 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:23:26.605Z,1520702606.605 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:23:27.003Z,1520702607.003 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:23:27.403Z,1520702607.403 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:23:27.811Z,1520702607.811 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:23:28.212Z,1520702608.212 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:23:28.614Z,1520702608.614 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:23:29.004Z,1520702609.004 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:23:29.387Z,1520702609.387 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:23:29.794Z,1520702609.794 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:23:30.204Z,1520702610.204 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:23:30.597Z,1520702610.597 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:23:30.981Z,1520702610.981 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-03-10T17:23:30.981Z,1520702610.981 [NAL9602] Data Fault, FailCount= 1
2018-03-10T17:23:30.981Z,1520702610.981 [NAL9602](ERROR): Data Fault
2018-03-10T17:23:30.999Z,1520702610.999 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:23:31.062Z,1520702611.062 [CBIT](ERROR): Data Fault in component: NAL9602
2018-03-10T17:23:31.382Z,1520702611.382 [NAL9602](INFO): Powering down
2018-03-10T17:23:31.400Z,1520702611.400 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:23:31.801Z,1520702611.801 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:23:32.198Z,1520702612.198 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:23:32.240Z,1520702612.240 [CBIT](INFO): Clearing failed state for component NAL9602
2018-03-10T17:23:32.240Z,1520702612.240 [NAL9602] No Fault, FailCount= 1
2018-03-10T17:23:32.606Z,1520702612.606 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:23:32.998Z,1520702612.998 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:23:33.392Z,1520702613.392 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:23:33.805Z,1520702613.805 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:23:34.195Z,1520702614.195 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:23:34.594Z,1520702614.594 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:23:35.004Z,1520702615.004 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:23:35.395Z,1520702615.395 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:23:35.803Z,1520702615.803 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:23:36.205Z,1520702616.205 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:23:36.601Z,1520702616.601 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:23:36.986Z,1520702616.986 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:23:37.399Z,1520702617.399 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:23:37.788Z,1520702617.788 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:23:38.182Z,1520702618.182 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:23:38.608Z,1520702618.608 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:23:38.990Z,1520702618.990 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:23:39.387Z,1520702619.387 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:23:39.793Z,1520702619.793 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:23:40.185Z,1520702620.185 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:23:40.584Z,1520702620.584 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:23:40.992Z,1520702620.992 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:23:41.384Z,1520702621.384 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:23:41.794Z,1520702621.794 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:23:42.194Z,1520702622.194 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:23:42.588Z,1520702622.588 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:23:42.988Z,1520702622.988 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:23:43.390Z,1520702623.390 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:23:43.786Z,1520702623.786 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:23:44.188Z,1520702624.188 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:23:44.588Z,1520702624.588 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:23:44.990Z,1520702624.990 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:23:45.389Z,1520702625.389 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:23:45.796Z,1520702625.796 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:23:46.188Z,1520702626.188 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:23:46.588Z,1520702626.588 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:23:46.997Z,1520702626.997 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:23:47.397Z,1520702627.397 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:23:47.789Z,1520702627.789 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:23:48.196Z,1520702628.196 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:23:48.597Z,1520702628.597 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:23:48.994Z,1520702628.994 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:23:49.406Z,1520702629.406 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:23:49.791Z,1520702629.791 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:23:50.196Z,1520702630.196 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:23:50.598Z,1520702630.598 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:23:50.996Z,1520702630.996 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:23:51.393Z,1520702631.393 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:23:51.804Z,1520702631.804 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:23:52.198Z,1520702632.198 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:23:52.591Z,1520702632.591 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:23:52.000Z,1520702633.000 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:23:53.393Z,1520702633.393 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:23:53.799Z,1520702633.799 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:23:54.199Z,1520702634.199 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:23:54.589Z,1520702634.589 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:23:54.988Z,1520702634.988 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:23:55.392Z,1520702635.392 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:23:55.788Z,1520702635.788 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:23:55.811Z,1520702635.811 [BPC1](FAULT): Failed to initialize
2018-03-10T17:23:55.811Z,1520702635.811 [BPC1] Communications Fault, FailCount= 3
2018-03-10T17:23:55.811Z,1520702635.811 [BPC1](ERROR): Communications Fault
2018-03-10T17:23:55.840Z,1520702635.840 [CBIT](ERROR): Communications Fault in component: BPC1
2018-03-10T17:23:56.185Z,1520702636.185 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:23:56.591Z,1520702636.591 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:23:56.989Z,1520702636.989 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:23:57.038Z,1520702637.038 [CBIT](INFO): Clearing failed state for component BPC1
2018-03-10T17:23:57.038Z,1520702637.038 [BPC1] No Fault, FailCount= 3
2018-03-10T17:23:57.384Z,1520702637.384 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:23:57.790Z,1520702637.790 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:23:58.186Z,1520702638.186 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:23:58.587Z,1520702638.587 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:23:58.988Z,1520702638.988 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:23:59.385Z,1520702639.385 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:23:59.794Z,1520702639.794 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:24:00.196Z,1520702640.196 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:24:00.583Z,1520702640.583 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:24:00.988Z,1520702640.988 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:24:01.397Z,1520702641.397 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:24:01.776Z,1520702641.776 [NAL9602](INFO): Powering up NAL9602
2018-03-10T17:24:01.794Z,1520702641.794 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:24:02.188Z,1520702642.188 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:24:02.611Z,1520702642.611 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:24:02.986Z,1520702642.986 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:24:03.397Z,1520702643.397 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:24:03.797Z,1520702643.797 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:24:04.198Z,1520702644.198 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:24:04.594Z,1520702644.594 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:24:04.993Z,1520702644.993 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:24:05.400Z,1520702645.400 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:24:05.801Z,1520702645.801 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:24:06.202Z,1520702646.202 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:24:10.272Z,1520702650.272 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:24:10.425Z,1520702650.425 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:24:10.816Z,1520702650.816 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:24:11.214Z,1520702651.214 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:24:11.614Z,1520702651.614 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:24:12.016Z,1520702652.016 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:24:12.423Z,1520702652.423 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:24:12.790Z,1520702652.790 [NAL9602](INFO): NAL9602 initialized
2018-03-10T17:24:12.816Z,1520702652.816 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:24:13.214Z,1520702653.214 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:24:13.624Z,1520702653.624 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:24:14.022Z,1520702654.022 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:24:14.426Z,1520702654.426 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:24:14.822Z,1520702654.822 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:24:15.204Z,1520702655.204 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:24:15.629Z,1520702655.629 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:24:16.032Z,1520702656.032 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:24:16.427Z,1520702656.427 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:24:16.827Z,1520702656.827 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:24:17.209Z,1520702657.209 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:24:17.606Z,1520702657.606 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:24:18.031Z,1520702658.031 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:24:18.409Z,1520702658.409 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:24:18.819Z,1520702658.819 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:24:19.238Z,1520702659.238 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:24:19.628Z,1520702659.628 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:24:20.005Z,1520702660.005 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:24:20.409Z,1520702660.409 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:24:20.813Z,1520702660.813 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:24:21.211Z,1520702661.211 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:24:21.613Z,1520702661.613 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:24:22.031Z,1520702662.031 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:24:22.424Z,1520702662.424 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:24:22.832Z,1520702662.832 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:24:23.221Z,1520702663.221 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:24:23.614Z,1520702663.614 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:24:24.017Z,1520702664.017 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:24:24.416Z,1520702664.416 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:24:24.818Z,1520702664.818 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:24:25.228Z,1520702665.228 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:24:25.627Z,1520702665.627 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:24:26.005Z,1520702666.005 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:24:26.412Z,1520702666.412 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:24:26.813Z,1520702666.813 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:24:27.206Z,1520702667.206 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:24:27.612Z,1520702667.612 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:24:27.628Z,1520702667.628 [BPC1](FAULT): Failed to initialize
2018-03-10T17:24:27.628Z,1520702667.628 [BPC1] Communications Fault, FailCount= 4
2018-03-10T17:24:27.628Z,1520702667.628 [BPC1](ERROR): Communications Fault
2018-03-10T17:24:27.691Z,1520702667.691 [CBIT](ERROR): Communications Fault in component: BPC1
2018-03-10T17:24:28.033Z,1520702668.033 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:24:28.431Z,1520702668.431 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:24:28.829Z,1520702668.829 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:24:28.858Z,1520702668.858 [CBIT](INFO): Clearing failed state for component BPC1
2018-03-10T17:24:28.859Z,1520702668.859 [BPC1] No Fault, FailCount= 4
2018-03-10T17:24:29.210Z,1520702669.210 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:24:29.609Z,1520702669.609 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:24:30.029Z,1520702670.029 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:24:30.423Z,1520702670.423 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:24:30.832Z,1520702670.832 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:24:31.233Z,1520702671.233 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:24:31.624Z,1520702671.624 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:24:32.013Z,1520702672.013 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:24:32.408Z,1520702672.408 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:24:32.813Z,1520702672.813 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:24:33.206Z,1520702673.206 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:24:33.608Z,1520702673.608 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:24:34.015Z,1520702674.015 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:24:34.435Z,1520702674.435 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:24:34.841Z,1520702674.841 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:24:35.209Z,1520702675.209 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:24:35.610Z,1520702675.610 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:24:36.010Z,1520702676.010 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:24:36.416Z,1520702676.416 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:24:36.827Z,1520702676.827 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:24:37.242Z,1520702677.242 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:24:37.627Z,1520702677.627 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:24:38.017Z,1520702678.017 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:24:38.413Z,1520702678.413 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:24:38.813Z,1520702678.813 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:24:39.213Z,1520702679.213 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:24:39.618Z,1520702679.618 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:24:40.019Z,1520702680.019 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:24:40.432Z,1520702680.432 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:24:40.824Z,1520702680.824 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:24:41.217Z,1520702681.217 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:24:41.617Z,1520702681.617 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:24:42.019Z,1520702682.019 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:24:42.414Z,1520702682.414 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:24:42.826Z,1520702682.826 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:24:43.226Z,1520702683.226 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:24:43.627Z,1520702683.627 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:24:44.020Z,1520702684.020 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:24:44.412Z,1520702684.412 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:24:44.822Z,1520702684.822 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:24:45.224Z,1520702685.224 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:24:45.608Z,1520702685.608 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:24:46.015Z,1520702686.015 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:24:46.400Z,1520702686.400 [NAL9602](INFO): GPS fix at 20180310T172408: (21.314529, -157.877704)
2018-03-10T17:24:46.417Z,1520702686.417 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:24:46.458Z,1520702686.458 [Default:CheckIn:Read_GPS] Stopped
2018-03-10T17:24:46.458Z,1520702686.458 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-03-10T17:24:46.828Z,1520702686.828 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:24:47.346Z,1520702687.346 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:24:47.621Z,1520702687.621 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:24:50.869Z,1520702690.869 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:24:51.019Z,1520702691.019 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:24:51.375Z,1520702691.375 [DataOverHttps](INFO): Sending 61 bytes from file Logs/20180310T051512/Courier0284.lzma
2018-03-10T17:24:51.410Z,1520702691.410 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:24:51.806Z,1520702691.806 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:24:52.174Z,1520702692.174 [DataOverHttps](INFO): Moved sent file to Logs/20180310T051512/Courier0284.lzma.bak
2018-03-10T17:24:52.174Z,1520702692.174 [DataOverHttps](INFO): SBD MOMSN=8006540
2018-03-10T17:24:52.218Z,1520702692.218 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:24:52.879Z,1520702692.879 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:24:53.010Z,1520702693.010 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:24:53.401Z,1520702693.401 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:24:56.741Z,1520702696.741 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:24:56.910Z,1520702696.910 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:24:57.234Z,1520702697.234 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:24:57.633Z,1520702697.633 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:24:58.038Z,1520702698.038 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:24:58.438Z,1520702698.438 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:24:58.828Z,1520702698.828 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:25:02.080Z,1520702702.080 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:25:02.196Z,1520702702.196 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:25:02.528Z,1520702702.528 [DataOverHttps](INFO): Sending 488 bytes from file Logs/20180310T051512/Express0285.lzma
2018-03-10T17:25:02.566Z,1520702702.566 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:25:02.949Z,1520702702.949 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:25:03.335Z,1520702703.335 [DataOverHttps](INFO): Moved sent file to Logs/20180310T051512/Express0285.lzma.bak
2018-03-10T17:25:03.335Z,1520702703.335 [DataOverHttps](INFO): SBD MOMSN=8006543
2018-03-10T17:25:03.357Z,1520702703.357 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:25:04.039Z,1520702704.039 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:25:04.059Z,1520702704.059 [Default:CheckIn:Read_Iridium] Stopped
2018-03-10T17:25:04.059Z,1520702704.059 [Default:CheckIn:C.Wait] Running Loop=1
2018-03-10T17:25:04.059Z,1520702704.059 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-03-10T17:25:04.161Z,1520702704.161 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:25:04.550Z,1520702704.550 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:25:07.822Z,1520702707.822 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:25:07.985Z,1520702707.985 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:25:08.342Z,1520702708.342 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:25:08.749Z,1520702708.749 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:25:09.126Z,1520702709.126 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:25:09.536Z,1520702709.536 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:25:09.926Z,1520702709.926 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:25:10.326Z,1520702710.326 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:25:10.720Z,1520702710.720 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:25:11.100Z,1520702711.100 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:25:11.517Z,1520702711.517 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:25:11.906Z,1520702711.906 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:25:12.304Z,1520702712.304 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:25:12.710Z,1520702712.710 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:25:13.114Z,1520702713.114 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:25:13.547Z,1520702713.547 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:25:13.932Z,1520702713.932 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:25:14.312Z,1520702714.312 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:25:14.728Z,1520702714.728 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:25:15.138Z,1520702715.138 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:25:15.529Z,1520702715.529 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:25:15.913Z,1520702715.913 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:25:16.326Z,1520702716.326 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:25:16.733Z,1520702716.733 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:25:17.124Z,1520702717.124 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:25:17.526Z,1520702717.526 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:25:17.915Z,1520702717.915 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:25:18.300Z,1520702718.300 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:25:18.727Z,1520702718.727 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:25:19.104Z,1520702719.104 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:25:19.520Z,1520702719.520 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:25:19.919Z,1520702719.919 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:25:20.304Z,1520702720.304 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:25:20.704Z,1520702720.704 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:25:21.093Z,1520702721.093 [NAL9602](INFO): Powering down
2018-03-10T17:25:21.122Z,1520702721.122 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:25:21.522Z,1520702721.522 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:25:21.924Z,1520702721.924 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:25:22.337Z,1520702722.337 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:25:22.734Z,1520702722.734 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:25:23.130Z,1520702723.130 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:25:23.499Z,1520702723.499 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:25:23.924Z,1520702723.924 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:25:24.326Z,1520702724.326 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:25:24.699Z,1520702724.699 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:25:25.123Z,1520702725.123 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:25:25.500Z,1520702725.500 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:25:25.906Z,1520702725.906 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:25:26.305Z,1520702726.305 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:25:26.710Z,1520702726.710 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:25:27.104Z,1520702727.104 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:25:27.536Z,1520702727.536 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:25:27.936Z,1520702727.936 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:25:28.316Z,1520702728.316 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:25:28.733Z,1520702728.733 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:25:29.147Z,1520702729.147 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:25:29.533Z,1520702729.533 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:25:29.910Z,1520702729.910 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:25:30.325Z,1520702730.325 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:25:30.744Z,1520702730.744 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:25:31.119Z,1520702731.119 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:25:31.517Z,1520702731.517 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:25:31.913Z,1520702731.913 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:25:32.317Z,1520702732.317 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:25:32.716Z,1520702732.716 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:25:33.126Z,1520702733.126 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:25:33.510Z,1520702733.510 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:25:33.919Z,1520702733.919 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:25:34.301Z,1520702734.301 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:25:34.705Z,1520702734.705 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:25:35.146Z,1520702735.146 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:25:35.500Z,1520702735.500 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:25:35.916Z,1520702735.916 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:25:36.326Z,1520702736.326 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:25:36.748Z,1520702736.748 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:25:37.136Z,1520702737.136 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:25:37.510Z,1520702737.510 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:25:37.927Z,1520702737.927 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:25:38.333Z,1520702738.333 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:25:38.713Z,1520702738.713 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:25:39.123Z,1520702739.123 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:25:39.525Z,1520702739.525 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:25:39.919Z,1520702739.919 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:25:40.321Z,1520702740.321 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:25:40.341Z,1520702740.341 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T17:25:40.341Z,1520702740.341 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 1
2018-03-10T17:25:40.342Z,1520702740.342 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-10T17:25:40.374Z,1520702740.374 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-10T17:25:40.722Z,1520702740.722 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:25:40.764Z,1520702740.764 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-10T17:25:40.764Z,1520702740.764 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 1
2018-03-10T17:25:41.117Z,1520702741.117 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:25:41.151Z,1520702741.151 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-10T17:25:41.152Z,1520702741.152 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-10T17:25:41.152Z,1520702741.152 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-10T17:25:41.520Z,1520702741.520 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:25:41.904Z,1520702741.904 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:25:42.304Z,1520702742.304 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:25:42.705Z,1520702742.705 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:25:43.136Z,1520702743.136 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:25:43.204Z,1520702743.204 [CBIT](DEBUG): EFC running - data check-sum false
2018-03-10T17:25:43.532Z,1520702743.532 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:25:43.937Z,1520702743.937 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:25:44.326Z,1520702744.326 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:25:44.736Z,1520702744.736 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:25:45.145Z,1520702745.145 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:25:45.525Z,1520702745.525 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:25:45.937Z,1520702745.937 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:25:46.319Z,1520702746.319 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:25:46.722Z,1520702746.722 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:25:47.116Z,1520702747.116 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:25:47.505Z,1520702747.505 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:25:47.918Z,1520702747.918 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:25:48.313Z,1520702748.313 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:25:48.714Z,1520702748.714 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:25:49.114Z,1520702749.114 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:25:49.513Z,1520702749.513 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:25:49.942Z,1520702749.942 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:25:50.326Z,1520702750.326 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:25:50.725Z,1520702750.725 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:25:51.132Z,1520702751.132 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:25:51.534Z,1520702751.534 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:25:51.908Z,1520702751.908 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:25:52.350Z,1520702752.350 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:25:52.723Z,1520702752.723 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:25:53.133Z,1520702753.133 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:25:53.526Z,1520702753.526 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:25:53.920Z,1520702753.920 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:25:54.300Z,1520702754.300 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:25:54.699Z,1520702754.699 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:25:55.117Z,1520702755.117 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:25:55.512Z,1520702755.512 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:25:55.911Z,1520702755.911 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:25:56.304Z,1520702756.304 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:25:56.706Z,1520702756.706 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:25:57.157Z,1520702757.157 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:25:57.505Z,1520702757.505 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:25:57.905Z,1520702757.905 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:25:58.333Z,1520702758.333 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:25:58.704Z,1520702758.704 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:25:59.110Z,1520702759.110 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:25:59.540Z,1520702759.540 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:25:59.904Z,1520702759.904 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:26:00.327Z,1520702760.327 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:26:00.718Z,1520702760.718 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:26:01.104Z,1520702761.104 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:26:01.504Z,1520702761.504 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:26:01.957Z,1520702761.957 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:26:02.321Z,1520702762.321 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:26:02.714Z,1520702762.714 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:26:03.114Z,1520702763.114 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:26:03.511Z,1520702763.511 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:26:03.916Z,1520702763.916 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:26:04.340Z,1520702764.340 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:26:04.747Z,1520702764.747 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:26:07.963Z,1520702767.963 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:26:08.070Z,1520702768.070 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:26:08.453Z,1520702768.453 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:26:08.856Z,1520702768.856 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:26:09.256Z,1520702769.256 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:26:09.644Z,1520702769.644 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:26:10.045Z,1520702770.045 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:26:10.457Z,1520702770.457 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:26:10.844Z,1520702770.844 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:26:11.245Z,1520702771.245 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:26:11.644Z,1520702771.644 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:26:12.044Z,1520702772.044 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:26:12.450Z,1520702772.450 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:26:12.849Z,1520702772.849 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:26:13.260Z,1520702773.260 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:26:13.653Z,1520702773.653 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:26:14.054Z,1520702774.054 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:26:14.446Z,1520702774.446 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:26:14.851Z,1520702774.851 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:26:15.252Z,1520702775.252 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:26:15.656Z,1520702775.656 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:26:16.050Z,1520702776.050 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:26:16.449Z,1520702776.449 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:26:16.850Z,1520702776.850 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:26:17.262Z,1520702777.262 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:26:17.652Z,1520702777.652 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:26:18.062Z,1520702778.062 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:26:18.456Z,1520702778.456 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:26:18.840Z,1520702778.840 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:26:19.240Z,1520702779.240 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:26:19.657Z,1520702779.657 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:26:20.068Z,1520702780.068 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:26:20.444Z,1520702780.444 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:26:20.861Z,1520702780.861 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:26:21.244Z,1520702781.244 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:26:21.665Z,1520702781.665 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:26:22.060Z,1520702782.060 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:26:22.445Z,1520702782.445 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:26:22.849Z,1520702782.849 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:26:23.249Z,1520702783.249 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:26:23.644Z,1520702783.644 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:26:24.044Z,1520702784.044 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:26:24.444Z,1520702784.444 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:26:24.845Z,1520702784.845 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:26:25.244Z,1520702785.244 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:26:25.644Z,1520702785.644 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:26:26.039Z,1520702786.039 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:26:26.444Z,1520702786.444 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:26:26.847Z,1520702786.847 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:26:27.244Z,1520702787.244 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:26:27.655Z,1520702787.655 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:26:28.046Z,1520702788.046 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:26:28.449Z,1520702788.449 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:26:28.850Z,1520702788.850 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:26:29.250Z,1520702789.250 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:26:29.650Z,1520702789.650 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:26:30.061Z,1520702790.061 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:26:30.450Z,1520702790.450 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:26:30.851Z,1520702790.851 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:26:31.252Z,1520702791.252 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:26:31.652Z,1520702791.652 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:26:32.048Z,1520702792.048 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:26:32.462Z,1520702792.462 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:26:32.846Z,1520702792.846 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:26:33.252Z,1520702793.252 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:26:33.651Z,1520702793.651 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:26:34.052Z,1520702794.052 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:26:34.453Z,1520702794.453 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:26:34.852Z,1520702794.852 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:26:35.255Z,1520702795.255 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:26:35.655Z,1520702795.655 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:26:36.052Z,1520702796.052 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:26:36.453Z,1520702796.453 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:26:36.861Z,1520702796.861 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:26:37.253Z,1520702797.253 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:26:37.652Z,1520702797.652 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:26:38.053Z,1520702798.053 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:26:38.443Z,1520702798.443 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:26:38.841Z,1520702798.841 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:26:39.256Z,1520702799.256 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:26:39.644Z,1520702799.644 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:26:40.044Z,1520702800.044 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:26:40.440Z,1520702800.440 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:26:40.840Z,1520702800.840 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:26:41.242Z,1520702801.242 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:26:41.643Z,1520702801.643 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:26:42.048Z,1520702802.048 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:26:42.442Z,1520702802.442 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:26:42.844Z,1520702802.844 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:26:43.244Z,1520702803.244 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:26:43.652Z,1520702803.652 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:26:44.049Z,1520702804.049 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:26:44.449Z,1520702804.449 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:26:44.848Z,1520702804.848 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:26:45.256Z,1520702805.256 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:26:45.651Z,1520702805.651 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:26:46.049Z,1520702806.049 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:26:46.452Z,1520702806.452 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:26:46.850Z,1520702806.850 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:26:47.247Z,1520702807.247 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:26:47.652Z,1520702807.652 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:26:48.052Z,1520702808.052 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:26:48.452Z,1520702808.452 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:26:48.854Z,1520702808.854 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:26:49.257Z,1520702809.257 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:26:49.652Z,1520702809.652 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:26:50.057Z,1520702810.057 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:26:50.444Z,1520702810.444 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:26:50.857Z,1520702810.857 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:26:51.244Z,1520702811.244 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:26:51.660Z,1520702811.660 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:26:52.056Z,1520702812.056 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:26:52.456Z,1520702812.456 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:26:52.844Z,1520702812.844 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:26:53.239Z,1520702813.239 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:26:53.644Z,1520702813.644 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:26:54.044Z,1520702814.044 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:26:54.438Z,1520702814.438 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:26:54.848Z,1520702814.848 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:26:55.244Z,1520702815.244 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:26:55.644Z,1520702815.644 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:26:56.044Z,1520702816.044 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:26:56.444Z,1520702816.444 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:26:56.840Z,1520702816.840 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:26:57.244Z,1520702817.244 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:26:57.652Z,1520702817.652 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:26:58.051Z,1520702818.051 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:26:58.448Z,1520702818.448 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:26:58.845Z,1520702818.845 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:26:59.248Z,1520702819.248 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:26:59.650Z,1520702819.650 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:27:00.045Z,1520702820.045 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:27:00.445Z,1520702820.445 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:27:00.857Z,1520702820.857 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:27:01.250Z,1520702821.250 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:27:01.652Z,1520702821.652 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:27:02.044Z,1520702822.044 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:27:02.455Z,1520702822.455 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:27:02.852Z,1520702822.852 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:27:03.254Z,1520702823.254 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:27:03.660Z,1520702823.660 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:27:04.047Z,1520702824.047 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:27:04.452Z,1520702824.452 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:27:04.857Z,1520702824.857 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:27:07.972Z,1520702827.972 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:27:08.105Z,1520702828.105 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:27:08.482Z,1520702828.482 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:27:08.875Z,1520702828.875 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:27:09.277Z,1520702829.277 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:27:09.669Z,1520702829.669 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:27:10.069Z,1520702830.069 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:27:10.468Z,1520702830.468 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:27:10.868Z,1520702830.868 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:27:11.268Z,1520702831.268 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:27:11.668Z,1520702831.668 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:27:12.069Z,1520702832.069 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:27:12.464Z,1520702832.464 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:27:12.872Z,1520702832.872 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:27:13.269Z,1520702833.269 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:27:13.672Z,1520702833.672 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:27:14.068Z,1520702834.068 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:27:14.472Z,1520702834.472 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:27:14.866Z,1520702834.866 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:27:15.274Z,1520702835.274 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:27:15.680Z,1520702835.680 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:27:16.072Z,1520702836.072 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:27:16.472Z,1520702836.472 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:27:16.872Z,1520702836.872 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:27:17.279Z,1520702837.279 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:27:17.679Z,1520702837.679 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:27:18.077Z,1520702838.077 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:27:18.476Z,1520702838.476 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:27:18.874Z,1520702838.874 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:27:19.274Z,1520702839.274 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:27:19.672Z,1520702839.672 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:27:20.082Z,1520702840.082 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:27:20.472Z,1520702840.472 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:27:20.877Z,1520702840.877 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:27:21.275Z,1520702841.275 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:27:21.676Z,1520702841.676 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:27:22.067Z,1520702842.067 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:27:22.485Z,1520702842.485 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:27:22.877Z,1520702842.877 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:27:23.275Z,1520702843.275 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:27:23.676Z,1520702843.676 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:27:24.070Z,1520702844.070 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:27:24.475Z,1520702844.475 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:27:24.877Z,1520702844.877 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:27:25.272Z,1520702845.272 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:27:25.668Z,1520702845.668 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:27:26.080Z,1520702846.080 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:27:26.468Z,1520702846.468 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:27:26.868Z,1520702846.868 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:27:27.273Z,1520702847.273 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:27:27.694Z,1520702847.694 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:27:28.074Z,1520702848.074 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:27:28.472Z,1520702848.472 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:27:28.873Z,1520702848.873 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:27:29.276Z,1520702849.276 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:27:29.674Z,1520702849.674 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:27:30.074Z,1520702850.074 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:27:30.472Z,1520702850.472 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:27:30.873Z,1520702850.873 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:27:31.273Z,1520702851.273 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:27:31.675Z,1520702851.675 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:27:32.072Z,1520702852.072 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:27:32.472Z,1520702852.472 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:27:32.876Z,1520702852.876 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:27:33.275Z,1520702853.275 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:27:33.677Z,1520702853.677 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:27:34.076Z,1520702854.076 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:27:34.480Z,1520702854.480 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:27:34.877Z,1520702854.877 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:27:35.276Z,1520702855.276 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:27:35.676Z,1520702855.676 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:27:36.074Z,1520702856.074 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:27:36.476Z,1520702856.476 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:27:36.876Z,1520702856.876 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:27:37.271Z,1520702857.271 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:27:37.681Z,1520702857.681 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:27:38.081Z,1520702858.081 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:27:38.472Z,1520702858.472 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:27:38.875Z,1520702858.875 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:27:39.281Z,1520702859.281 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:27:39.685Z,1520702859.685 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:27:40.072Z,1520702860.072 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:27:40.472Z,1520702860.472 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:27:40.889Z,1520702860.889 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:27:41.264Z,1520702861.264 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:27:41.667Z,1520702861.667 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:27:42.090Z,1520702862.090 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:27:42.463Z,1520702862.463 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:27:42.864Z,1520702862.864 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:27:43.272Z,1520702863.272 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:27:43.663Z,1520702863.663 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:27:44.072Z,1520702864.072 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:27:44.468Z,1520702864.468 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:27:44.866Z,1520702864.866 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:27:45.276Z,1520702865.276 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:27:45.676Z,1520702865.676 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:27:46.074Z,1520702866.074 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:27:46.472Z,1520702866.472 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:27:46.878Z,1520702866.878 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:27:47.278Z,1520702867.278 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:27:47.678Z,1520702867.678 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:27:48.099Z,1520702868.099 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:27:48.478Z,1520702868.478 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:27:48.878Z,1520702868.878 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:27:49.278Z,1520702869.278 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:27:49.670Z,1520702869.670 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:27:50.080Z,1520702870.080 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:27:50.498Z,1520702870.498 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:27:50.874Z,1520702870.874 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:27:51.277Z,1520702871.277 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:27:51.691Z,1520702871.691 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:27:52.075Z,1520702872.075 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:27:52.476Z,1520702872.476 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:27:52.876Z,1520702872.876 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:27:53.277Z,1520702873.277 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:27:53.677Z,1520702873.677 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:27:54.076Z,1520702874.076 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:27:54.482Z,1520702874.482 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:27:54.875Z,1520702874.875 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:27:55.287Z,1520702875.287 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:27:55.680Z,1520702875.680 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:27:56.066Z,1520702876.066 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:27:56.480Z,1520702876.480 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:27:56.868Z,1520702876.868 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:27:57.268Z,1520702877.268 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:27:57.669Z,1520702877.669 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:27:58.068Z,1520702878.068 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:27:58.472Z,1520702878.472 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:27:58.868Z,1520702878.868 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:27:59.263Z,1520702879.263 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:27:59.668Z,1520702879.668 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:28:00.068Z,1520702880.068 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:28:00.468Z,1520702880.468 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:28:00.868Z,1520702880.868 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:28:01.287Z,1520702881.287 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:28:01.668Z,1520702881.668 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:28:02.072Z,1520702882.072 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:28:02.469Z,1520702882.469 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:28:02.868Z,1520702882.868 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:28:03.267Z,1520702883.267 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:28:03.672Z,1520702883.672 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:28:04.076Z,1520702884.076 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:28:04.477Z,1520702884.477 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:28:04.875Z,1520702884.875 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:28:05.276Z,1520702885.276 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:28:05.677Z,1520702885.677 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:28:06.072Z,1520702886.072 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:28:09.499Z,1520702889.499 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:28:09.618Z,1520702889.618 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:28:10.010Z,1520702890.010 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:28:10.408Z,1520702890.408 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:28:10.814Z,1520702890.814 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:28:11.204Z,1520702891.204 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:28:11.613Z,1520702891.613 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:28:12.004Z,1520702892.004 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:28:12.412Z,1520702892.412 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:28:12.802Z,1520702892.802 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:28:13.201Z,1520702893.201 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:28:13.601Z,1520702893.601 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:28:13.999Z,1520702893.999 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:28:14.401Z,1520702894.401 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:28:14.800Z,1520702894.800 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:28:15.200Z,1520702895.200 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:28:15.615Z,1520702895.615 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:28:16.000Z,1520702896.000 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:28:16.401Z,1520702896.401 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:28:16.815Z,1520702896.815 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:28:17.201Z,1520702897.201 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:28:17.597Z,1520702897.597 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:28:17.995Z,1520702897.995 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:28:18.405Z,1520702898.405 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:28:18.799Z,1520702898.799 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:28:19.200Z,1520702899.200 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:28:19.600Z,1520702899.600 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:28:20.008Z,1520702900.008 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:28:20.405Z,1520702900.405 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:28:20.812Z,1520702900.812 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:28:21.202Z,1520702901.202 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:28:21.601Z,1520702901.601 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:28:22.007Z,1520702902.007 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:28:22.401Z,1520702902.401 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:28:22.809Z,1520702902.809 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:28:23.212Z,1520702903.212 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:28:23.611Z,1520702903.611 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:28:24.004Z,1520702904.004 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:28:24.403Z,1520702904.403 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:28:24.804Z,1520702904.804 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:28:25.212Z,1520702905.212 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:28:25.609Z,1520702905.609 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:28:26.003Z,1520702906.003 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:28:26.407Z,1520702906.407 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:28:26.808Z,1520702906.808 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:28:27.209Z,1520702907.209 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:28:27.621Z,1520702907.621 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:28:28.021Z,1520702908.021 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:28:28.399Z,1520702908.399 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:28:28.804Z,1520702908.804 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:28:29.203Z,1520702909.203 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:28:29.603Z,1520702909.603 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:28:30.039Z,1520702910.039 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:28:30.417Z,1520702910.417 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:28:30.810Z,1520702910.810 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:28:31.210Z,1520702911.210 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:28:31.607Z,1520702911.607 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:28:32.009Z,1520702912.009 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:28:32.408Z,1520702912.408 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:28:32.806Z,1520702912.806 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:28:33.217Z,1520702913.217 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:28:33.603Z,1520702913.603 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:28:34.007Z,1520702914.007 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:28:34.407Z,1520702914.407 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:28:34.796Z,1520702914.796 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:28:35.221Z,1520702915.221 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:28:35.602Z,1520702915.602 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:28:36.002Z,1520702916.002 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:28:36.402Z,1520702916.402 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:28:36.800Z,1520702916.800 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:28:37.204Z,1520702917.204 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:28:37.600Z,1520702917.600 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:28:38.001Z,1520702918.001 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:28:38.426Z,1520702918.426 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:28:38.821Z,1520702918.821 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:28:39.220Z,1520702919.220 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:28:39.600Z,1520702919.600 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:28:40.020Z,1520702920.020 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:28:40.404Z,1520702920.404 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:28:40.803Z,1520702920.803 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:28:41.200Z,1520702921.200 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:28:41.240Z,1520702921.240 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T17:28:41.240Z,1520702921.240 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 2
2018-03-10T17:28:41.240Z,1520702921.240 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-10T17:28:41.252Z,1520702921.252 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-10T17:28:41.608Z,1520702921.608 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:28:41.654Z,1520702921.654 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-10T17:28:41.654Z,1520702921.654 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 2
2018-03-10T17:28:42.011Z,1520702922.011 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:28:42.047Z,1520702922.047 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-10T17:28:42.048Z,1520702922.048 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-10T17:28:42.048Z,1520702922.048 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-10T17:28:42.405Z,1520702922.405 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:28:42.809Z,1520702922.809 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:28:43.209Z,1520702923.209 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:28:43.609Z,1520702923.609 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:28:44.006Z,1520702924.006 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:28:44.415Z,1520702924.415 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:28:44.804Z,1520702924.804 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:28:45.209Z,1520702925.209 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:28:45.610Z,1520702925.610 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:28:46.028Z,1520702926.028 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:28:46.408Z,1520702926.408 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:28:46.818Z,1520702926.818 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:28:47.204Z,1520702927.204 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:28:47.608Z,1520702927.608 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:28:48.000Z,1520702928.000 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:28:48.400Z,1520702928.400 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:28:48.806Z,1520702928.806 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:28:49.208Z,1520702929.208 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:28:49.608Z,1520702929.608 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:28:50.010Z,1520702930.010 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:28:50.414Z,1520702930.414 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:28:50.810Z,1520702930.810 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:28:51.205Z,1520702931.205 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:28:51.611Z,1520702931.611 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:28:52.014Z,1520702932.014 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:28:52.424Z,1520702932.424 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:28:52.796Z,1520702932.796 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:28:53.213Z,1520702933.213 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:28:53.608Z,1520702933.608 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:28:54.012Z,1520702934.012 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:28:54.421Z,1520702934.421 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:28:54.796Z,1520702934.796 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:28:55.224Z,1520702935.224 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:28:55.601Z,1520702935.601 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:28:56.004Z,1520702936.004 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:28:56.402Z,1520702936.402 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:28:56.827Z,1520702936.827 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:28:57.200Z,1520702937.200 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:28:57.600Z,1520702937.600 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:28:58.001Z,1520702938.001 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:28:58.401Z,1520702938.401 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:28:58.816Z,1520702938.816 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:28:59.209Z,1520702939.209 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:28:59.605Z,1520702939.605 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:29:00.010Z,1520702940.010 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:29:00.406Z,1520702940.406 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:29:00.809Z,1520702940.809 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:29:01.217Z,1520702941.217 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:29:01.629Z,1520702941.629 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:29:01.996Z,1520702941.996 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:29:02.404Z,1520702942.404 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:29:02.802Z,1520702942.802 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:29:03.200Z,1520702943.200 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:29:03.604Z,1520702943.604 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:29:04.002Z,1520702944.002 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:29:04.401Z,1520702944.401 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:29:04.800Z,1520702944.800 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:29:05.200Z,1520702945.200 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:29:08.697Z,1520702948.697 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:29:08.843Z,1520702948.843 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:29:09.225Z,1520702949.225 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:29:09.597Z,1520702949.597 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:29:09.996Z,1520702949.996 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:29:10.402Z,1520702950.402 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:29:10.801Z,1520702950.801 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:29:11.196Z,1520702951.196 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:29:11.594Z,1520702951.594 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:29:11.988Z,1520702951.988 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:29:12.405Z,1520702952.405 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:29:12.788Z,1520702952.788 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:29:13.189Z,1520702953.189 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:29:13.600Z,1520702953.600 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:29:13.988Z,1520702953.988 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:29:14.389Z,1520702954.389 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:29:14.792Z,1520702954.792 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:29:15.188Z,1520702955.188 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:29:15.590Z,1520702955.590 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:29:15.988Z,1520702955.988 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:29:16.388Z,1520702956.388 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:29:16.823Z,1520702956.823 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:29:17.189Z,1520702957.189 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:29:17.595Z,1520702957.595 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:29:17.998Z,1520702957.998 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:29:18.398Z,1520702958.398 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:29:18.795Z,1520702958.795 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:29:19.200Z,1520702959.200 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:29:19.596Z,1520702959.596 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:29:19.996Z,1520702959.996 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:29:20.394Z,1520702960.394 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:29:20.800Z,1520702960.800 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:29:21.201Z,1520702961.201 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:29:21.590Z,1520702961.590 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:29:21.989Z,1520702961.989 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:29:22.390Z,1520702962.390 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:29:22.788Z,1520702962.788 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:29:23.214Z,1520702963.214 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:29:23.593Z,1520702963.593 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:29:24.013Z,1520702964.013 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:29:24.399Z,1520702964.399 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:29:24.804Z,1520702964.804 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:29:25.200Z,1520702965.200 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:29:25.595Z,1520702965.595 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:29:26.000Z,1520702966.000 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:29:26.397Z,1520702966.397 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:29:26.795Z,1520702966.795 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:29:27.200Z,1520702967.200 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:29:27.601Z,1520702967.601 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:29:27.998Z,1520702967.998 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:29:28.400Z,1520702968.400 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:29:28.803Z,1520702968.803 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:29:29.198Z,1520702969.198 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:29:29.596Z,1520702969.596 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:29:29.997Z,1520702969.997 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:29:30.390Z,1520702970.390 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:29:30.788Z,1520702970.788 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:29:31.184Z,1520702971.184 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:29:31.589Z,1520702971.589 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:29:31.988Z,1520702971.988 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:29:32.400Z,1520702972.400 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:29:32.799Z,1520702972.799 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:29:33.189Z,1520702973.189 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:29:33.589Z,1520702973.589 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:29:33.989Z,1520702973.989 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:29:34.393Z,1520702974.393 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:29:34.798Z,1520702974.798 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:29:35.191Z,1520702975.191 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:29:35.626Z,1520702975.626 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:29:36.000Z,1520702976.000 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:29:36.456Z,1520702976.456 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:29:36.811Z,1520702976.811 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:29:37.188Z,1520702977.188 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:29:37.587Z,1520702977.587 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:29:37.988Z,1520702977.988 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:29:38.388Z,1520702978.388 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:29:38.796Z,1520702978.796 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:29:39.200Z,1520702979.200 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:29:39.593Z,1520702979.593 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:29:39.992Z,1520702979.992 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:29:40.397Z,1520702980.397 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:29:40.795Z,1520702980.795 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:29:41.197Z,1520702981.197 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:29:41.588Z,1520702981.588 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:29:41.000Z,1520702982.000 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:29:42.388Z,1520702982.388 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:29:42.788Z,1520702982.788 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:29:43.189Z,1520702983.189 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:29:43.590Z,1520702983.590 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:29:43.988Z,1520702983.988 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:29:44.385Z,1520702984.385 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:29:44.788Z,1520702984.788 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:29:45.188Z,1520702985.188 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:29:45.584Z,1520702985.584 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:29:45.992Z,1520702985.992 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:29:46.392Z,1520702986.392 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:29:46.790Z,1520702986.790 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:29:47.189Z,1520702987.189 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:29:47.607Z,1520702987.607 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:29:47.991Z,1520702987.991 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:29:48.413Z,1520702988.413 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:29:48.790Z,1520702988.790 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:29:49.188Z,1520702989.188 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:29:49.619Z,1520702989.619 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:29:50.030Z,1520702990.030 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:29:50.388Z,1520702990.388 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:29:50.827Z,1520702990.827 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:29:51.195Z,1520702991.195 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:29:51.602Z,1520702991.602 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:29:52.001Z,1520702992.001 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:29:52.404Z,1520702992.404 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:29:52.798Z,1520702992.798 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:29:53.219Z,1520702993.219 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:29:53.605Z,1520702993.605 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:29:53.988Z,1520702993.988 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:29:54.400Z,1520702994.400 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:29:54.809Z,1520702994.809 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:29:55.192Z,1520702995.192 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:29:55.590Z,1520702995.590 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:29:56.004Z,1520702996.004 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:29:56.394Z,1520702996.394 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:29:56.790Z,1520702996.790 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:29:57.194Z,1520702997.194 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:29:57.596Z,1520702997.596 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:29:57.997Z,1520702997.997 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:29:58.396Z,1520702998.396 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:29:58.793Z,1520702998.793 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:29:59.194Z,1520702999.194 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:29:59.600Z,1520702999.600 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:29:59.995Z,1520702999.995 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:30:00.394Z,1520703000.394 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:30:00.800Z,1520703000.800 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:30:01.191Z,1520703001.191 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:30:01.594Z,1520703001.594 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:30:01.994Z,1520703001.994 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:30:02.401Z,1520703002.401 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:30:02.800Z,1520703002.800 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:30:03.188Z,1520703003.188 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:30:03.609Z,1520703003.609 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:30:03.989Z,1520703003.989 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:30:04.410Z,1520703004.410 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:30:04.438Z,1520703004.438 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-03-10T17:30:04.438Z,1520703004.438 [Default:CheckIn:C.Wait] Stopped
2018-03-10T17:30:04.438Z,1520703004.438 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-03-10T17:30:04.438Z,1520703004.438 [Default:CheckIn:D] Running Loop=1
2018-03-10T17:30:04.789Z,1520703004.789 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:30:04.830Z,1520703004.830 [Default:CheckIn:D] Stopped
2018-03-10T17:30:04.830Z,1520703004.830 [Default:CheckIn:E] Running Loop=1
2018-03-10T17:30:05.189Z,1520703005.189 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:30:05.221Z,1520703005.221 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 730.781836 min 
2018-03-10T17:30:05.222Z,1520703005.222 [Default:CheckIn:E] Stopped
2018-03-10T17:30:05.222Z,1520703005.222 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-03-10T17:30:05.222Z,1520703005.222 [Default:CheckIn] Stopped
2018-03-10T17:30:05.222Z,1520703005.222 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-03-10T17:30:05.222Z,1520703005.222 [Default:CheckIn](INFO): Running loop #72
2018-03-10T17:30:05.222Z,1520703005.222 [Default:CheckIn] Running Loop=72
2018-03-10T17:30:05.222Z,1520703005.222 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-03-10T17:30:05.222Z,1520703005.222 [Default:CheckIn:Read_GPS] Running Loop=1
2018-03-10T17:30:05.614Z,1520703005.614 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:30:08.954Z,1520703008.954 [NAL9602](INFO): Powering up
2018-03-10T17:30:08.972Z,1520703008.972 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:30:09.133Z,1520703009.133 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:30:09.536Z,1520703009.536 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:30:09.970Z,1520703009.970 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:30:10.380Z,1520703010.380 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:30:10.743Z,1520703010.743 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:30:11.147Z,1520703011.147 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:30:11.557Z,1520703011.557 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:30:11.953Z,1520703011.953 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:30:12.325Z,1520703012.325 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:30:12.743Z,1520703012.743 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:30:13.158Z,1520703013.158 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:30:13.530Z,1520703013.530 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:30:13.929Z,1520703013.929 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:30:14.328Z,1520703014.328 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:30:14.733Z,1520703014.733 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:30:15.144Z,1520703015.144 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:30:15.576Z,1520703015.576 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:30:15.923Z,1520703015.923 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:30:16.326Z,1520703016.326 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:30:16.736Z,1520703016.736 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:30:17.168Z,1520703017.168 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:30:17.568Z,1520703017.568 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:30:17.934Z,1520703017.934 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:30:18.350Z,1520703018.350 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:30:18.764Z,1520703018.764 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:30:19.162Z,1520703019.162 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:30:19.540Z,1520703019.540 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:30:19.933Z,1520703019.933 [NAL9602](INFO): NAL9602 initialized
2018-03-10T17:30:19.962Z,1520703019.962 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:30:20.361Z,1520703020.361 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:30:20.750Z,1520703020.750 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:30:21.153Z,1520703021.153 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:30:21.540Z,1520703021.540 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:30:21.942Z,1520703021.942 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:30:22.341Z,1520703022.341 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:30:22.736Z,1520703022.736 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:30:23.134Z,1520703023.134 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:30:23.543Z,1520703023.543 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:30:23.932Z,1520703023.932 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:30:24.370Z,1520703024.370 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:30:24.746Z,1520703024.746 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:30:25.141Z,1520703025.141 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:30:25.546Z,1520703025.546 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:30:25.960Z,1520703025.960 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:30:26.355Z,1520703026.355 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:30:26.726Z,1520703026.726 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:30:27.147Z,1520703027.147 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:30:27.554Z,1520703027.554 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:30:27.934Z,1520703027.934 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:30:28.334Z,1520703028.334 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:30:28.728Z,1520703028.728 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:30:29.137Z,1520703029.137 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:30:29.534Z,1520703029.534 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:30:29.932Z,1520703029.932 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:30:30.328Z,1520703030.328 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:30:30.726Z,1520703030.726 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:30:31.149Z,1520703031.149 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:30:31.575Z,1520703031.575 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:30:31.953Z,1520703031.953 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:30:32.336Z,1520703032.336 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:30:32.758Z,1520703032.758 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:30:33.165Z,1520703033.165 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:30:33.561Z,1520703033.561 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:30:33.964Z,1520703033.964 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:30:34.338Z,1520703034.338 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:30:34.749Z,1520703034.749 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:30:35.134Z,1520703035.134 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:30:35.556Z,1520703035.556 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:30:35.928Z,1520703035.928 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:30:36.348Z,1520703036.348 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:30:36.734Z,1520703036.734 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:30:37.151Z,1520703037.151 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:30:37.528Z,1520703037.528 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:30:37.923Z,1520703037.923 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:30:38.327Z,1520703038.327 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:30:38.780Z,1520703038.780 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:30:39.136Z,1520703039.136 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:30:39.555Z,1520703039.555 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:30:39.941Z,1520703039.941 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:30:40.360Z,1520703040.360 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:30:40.764Z,1520703040.764 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:30:41.131Z,1520703041.131 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:30:41.539Z,1520703041.539 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:30:41.949Z,1520703041.949 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:30:42.344Z,1520703042.344 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:30:42.745Z,1520703042.745 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:30:43.140Z,1520703043.140 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:30:43.540Z,1520703043.540 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:30:43.939Z,1520703043.939 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:30:44.334Z,1520703044.334 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:30:44.736Z,1520703044.736 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:30:45.133Z,1520703045.133 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:30:45.536Z,1520703045.536 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:30:45.964Z,1520703045.964 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:30:46.345Z,1520703046.345 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:30:46.742Z,1520703046.742 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:30:47.149Z,1520703047.149 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:30:47.542Z,1520703047.542 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:30:47.939Z,1520703047.939 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:30:48.361Z,1520703048.361 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:30:48.723Z,1520703048.723 [NAL9602](INFO): SBD MO Status=0, MOMSN=5837, MT Status=0, MTMSN=0
2018-03-10T17:30:48.723Z,1520703048.723 [NAL9602](INFO): No messages in MT queue
2018-03-10T17:30:48.750Z,1520703048.750 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:30:49.152Z,1520703049.152 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:30:49.532Z,1520703049.532 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:30:49.955Z,1520703049.955 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:30:50.348Z,1520703050.348 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:30:50.733Z,1520703050.733 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:30:51.147Z,1520703051.147 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:30:51.531Z,1520703051.531 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:30:51.931Z,1520703051.931 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:30:52.339Z,1520703052.339 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:30:52.748Z,1520703052.748 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:30:53.150Z,1520703053.150 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:30:53.548Z,1520703053.548 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:30:53.950Z,1520703053.950 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:30:54.354Z,1520703054.354 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:30:54.763Z,1520703054.763 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:30:55.168Z,1520703055.168 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:30:55.567Z,1520703055.567 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:30:55.939Z,1520703055.939 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:30:56.360Z,1520703056.360 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:30:56.734Z,1520703056.734 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:30:57.136Z,1520703057.136 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:30:57.536Z,1520703057.536 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:30:57.965Z,1520703057.965 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:30:58.356Z,1520703058.356 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:30:58.752Z,1520703058.752 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:30:59.140Z,1520703059.140 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:30:59.526Z,1520703059.526 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:30:59.937Z,1520703059.937 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:31:00.372Z,1520703060.372 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:31:00.760Z,1520703060.760 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:31:01.161Z,1520703061.161 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:31:01.573Z,1520703061.573 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:31:01.976Z,1520703061.976 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:31:02.350Z,1520703062.350 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:31:02.745Z,1520703062.745 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:31:03.144Z,1520703063.144 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:31:03.550Z,1520703063.550 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:31:03.943Z,1520703063.943 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:31:04.344Z,1520703064.344 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:31:04.744Z,1520703064.744 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:31:05.133Z,1520703065.133 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:31:05.528Z,1520703065.528 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:31:05.929Z,1520703065.929 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:31:09.234Z,1520703069.234 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:31:09.358Z,1520703069.358 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:31:09.727Z,1520703069.727 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:31:10.123Z,1520703070.123 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:31:10.536Z,1520703070.536 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:31:10.915Z,1520703070.915 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:31:11.314Z,1520703071.314 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:31:11.712Z,1520703071.712 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:31:12.126Z,1520703072.126 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:31:12.531Z,1520703072.531 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:31:12.927Z,1520703072.927 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:31:13.320Z,1520703073.320 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:31:13.708Z,1520703073.708 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:31:14.110Z,1520703074.110 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:31:14.507Z,1520703074.507 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:31:14.919Z,1520703074.919 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:31:15.332Z,1520703075.332 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:31:15.719Z,1520703075.719 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:31:16.117Z,1520703076.117 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:31:16.513Z,1520703076.513 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:31:16.908Z,1520703076.908 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:31:17.310Z,1520703077.310 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:31:17.709Z,1520703077.709 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:31:18.120Z,1520703078.120 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:31:18.533Z,1520703078.533 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:31:18.915Z,1520703078.915 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:31:19.308Z,1520703079.308 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:31:19.709Z,1520703079.709 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:31:20.114Z,1520703080.114 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:31:20.521Z,1520703080.521 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:31:20.919Z,1520703080.919 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:31:21.323Z,1520703081.323 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:31:21.738Z,1520703081.738 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:31:22.122Z,1520703082.122 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:31:22.513Z,1520703082.513 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:31:22.909Z,1520703082.909 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:31:23.314Z,1520703083.314 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:31:23.717Z,1520703083.717 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:31:24.127Z,1520703084.127 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:31:24.527Z,1520703084.527 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:31:24.928Z,1520703084.928 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:31:25.313Z,1520703085.313 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:31:25.713Z,1520703085.713 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:31:26.120Z,1520703086.120 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:31:26.514Z,1520703086.514 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:31:26.940Z,1520703086.940 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:31:27.326Z,1520703087.326 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:31:27.730Z,1520703087.730 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:31:28.109Z,1520703088.109 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:31:28.509Z,1520703088.509 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:31:28.908Z,1520703088.908 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:31:29.311Z,1520703089.311 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:31:29.710Z,1520703089.710 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:31:30.127Z,1520703090.127 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:31:30.527Z,1520703090.527 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:31:30.924Z,1520703090.924 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:31:31.321Z,1520703091.321 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:31:31.714Z,1520703091.714 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:31:32.121Z,1520703092.121 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:31:32.518Z,1520703092.518 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:31:32.923Z,1520703092.923 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:31:33.340Z,1520703093.340 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:31:33.740Z,1520703093.740 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:31:34.118Z,1520703094.118 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:31:34.523Z,1520703094.523 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:31:34.921Z,1520703094.921 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:31:35.322Z,1520703095.322 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:31:35.716Z,1520703095.716 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:31:36.124Z,1520703096.124 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:31:36.536Z,1520703096.536 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:31:36.934Z,1520703096.934 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:31:37.309Z,1520703097.309 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:31:37.709Z,1520703097.709 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:31:38.127Z,1520703098.127 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:31:38.508Z,1520703098.508 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:31:38.928Z,1520703098.928 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:31:39.332Z,1520703099.332 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:31:39.740Z,1520703099.740 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:31:40.109Z,1520703100.109 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:31:40.505Z,1520703100.505 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:31:40.916Z,1520703100.916 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:31:41.312Z,1520703101.312 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:31:41.709Z,1520703101.709 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:31:42.140Z,1520703102.140 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:31:42.203Z,1520703102.203 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T17:31:42.203Z,1520703102.203 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 3
2018-03-10T17:31:42.203Z,1520703102.203 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-10T17:31:42.228Z,1520703102.228 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-10T17:31:42.500Z,1520703102.500 [NAL9602](INFO): GPS fix at 20180310T173104: (21.315656, -157.876979)
2018-03-10T17:31:42.517Z,1520703102.517 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:31:42.557Z,1520703102.557 [Default:CheckIn:Read_GPS] Stopped
2018-03-10T17:31:42.557Z,1520703102.557 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-03-10T17:31:42.573Z,1520703102.573 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-10T17:31:42.573Z,1520703102.573 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 3
2018-03-10T17:31:42.932Z,1520703102.932 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:31:42.959Z,1520703102.959 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-10T17:31:42.959Z,1520703102.959 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-10T17:31:42.960Z,1520703102.960 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-10T17:31:43.465Z,1520703103.465 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:31:43.712Z,1520703103.712 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:31:44.122Z,1520703104.122 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:31:47.380Z,1520703107.380 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:31:47.496Z,1520703107.496 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:31:47.875Z,1520703107.875 [DataOverHttps](INFO): Sending 61 bytes from file Logs/20180310T051512/Courier0288.lzma
2018-03-10T17:31:47.898Z,1520703107.898 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:31:48.291Z,1520703108.291 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:31:48.666Z,1520703108.666 [DataOverHttps](INFO): Moved sent file to Logs/20180310T051512/Courier0288.lzma.bak
2018-03-10T17:31:48.666Z,1520703108.666 [DataOverHttps](INFO): SBD MOMSN=8006618
2018-03-10T17:31:48.698Z,1520703108.698 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:31:49.360Z,1520703109.360 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:31:49.492Z,1520703109.492 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:31:49.896Z,1520703109.896 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:31:53.178Z,1520703113.178 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:31:53.319Z,1520703113.319 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:31:53.693Z,1520703113.693 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:31:54.088Z,1520703114.088 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:31:54.492Z,1520703114.492 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:31:54.885Z,1520703114.885 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:31:55.284Z,1520703115.284 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:31:55.689Z,1520703115.689 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:31:56.084Z,1520703116.084 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:31:56.489Z,1520703116.489 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:31:56.892Z,1520703116.892 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:32:00.181Z,1520703120.181 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:32:00.295Z,1520703120.295 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:32:00.658Z,1520703120.658 [DataOverHttps](INFO): Sending 136 bytes from file Logs/20180310T051512/Express0289.lzma
2018-03-10T17:32:00.684Z,1520703120.684 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:32:01.078Z,1520703121.078 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:32:01.461Z,1520703121.461 [DataOverHttps](INFO): Moved sent file to Logs/20180310T051512/Express0289.lzma.bak
2018-03-10T17:32:01.461Z,1520703121.461 [DataOverHttps](INFO): SBD MOMSN=8006622
2018-03-10T17:32:01.482Z,1520703121.482 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:32:02.163Z,1520703122.163 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:32:02.184Z,1520703122.184 [Default:CheckIn:Read_Iridium] Stopped
2018-03-10T17:32:02.184Z,1520703122.184 [Default:CheckIn:C.Wait] Running Loop=1
2018-03-10T17:32:02.184Z,1520703122.184 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-03-10T17:32:02.285Z,1520703122.285 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:32:02.680Z,1520703122.680 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:32:06.021Z,1520703126.021 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:32:06.152Z,1520703126.152 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:32:06.496Z,1520703126.496 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:32:06.889Z,1520703126.889 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:32:07.297Z,1520703127.297 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:32:07.699Z,1520703127.699 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:32:08.093Z,1520703128.093 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:32:08.493Z,1520703128.493 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:32:08.903Z,1520703128.903 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:32:09.293Z,1520703129.293 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:32:09.698Z,1520703129.698 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:32:10.096Z,1520703130.096 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:32:10.491Z,1520703130.491 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:32:10.895Z,1520703130.895 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:32:11.306Z,1520703131.306 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:32:11.696Z,1520703131.696 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:32:12.086Z,1520703132.086 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:32:12.484Z,1520703132.484 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:32:12.895Z,1520703132.895 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:32:13.296Z,1520703133.296 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:32:13.696Z,1520703133.696 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:32:14.096Z,1520703134.096 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:32:14.483Z,1520703134.483 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:32:14.888Z,1520703134.888 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:32:15.288Z,1520703135.288 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:32:15.689Z,1520703135.689 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:32:16.105Z,1520703136.105 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:32:16.488Z,1520703136.488 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:32:16.883Z,1520703136.883 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:32:17.288Z,1520703137.288 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:32:17.672Z,1520703137.672 [NAL9602](INFO): Powering down
2018-03-10T17:32:17.691Z,1520703137.691 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:32:18.088Z,1520703138.088 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:32:18.509Z,1520703138.509 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:32:18.883Z,1520703138.883 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:32:19.286Z,1520703139.286 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:32:19.691Z,1520703139.691 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:32:20.092Z,1520703140.092 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:32:20.486Z,1520703140.486 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:32:20.888Z,1520703140.888 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:32:21.292Z,1520703141.292 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:32:21.692Z,1520703141.692 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:32:22.092Z,1520703142.092 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:32:22.488Z,1520703142.488 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:32:22.888Z,1520703142.888 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:32:23.304Z,1520703143.304 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:32:23.695Z,1520703143.695 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:32:24.094Z,1520703144.094 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:32:24.500Z,1520703144.500 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:32:24.895Z,1520703144.895 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:32:25.295Z,1520703145.295 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:32:25.693Z,1520703145.693 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:32:26.096Z,1520703146.096 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:32:26.497Z,1520703146.497 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:32:26.897Z,1520703146.897 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:32:27.293Z,1520703147.293 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:32:27.696Z,1520703147.696 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:32:28.096Z,1520703148.096 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:32:28.496Z,1520703148.496 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:32:28.895Z,1520703148.895 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:32:29.306Z,1520703149.306 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:32:29.700Z,1520703149.700 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:32:30.097Z,1520703150.097 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:32:30.505Z,1520703150.505 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:32:30.892Z,1520703150.892 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:32:30.908Z,1520703150.908 [BPC1](ERROR): Failed to receive battery data
2018-03-10T17:32:30.908Z,1520703150.908 [BPC1] Communications Fault, FailCount= 1
2018-03-10T17:32:30.908Z,1520703150.908 [BPC1](ERROR): Communications Fault
2018-03-10T17:32:30.931Z,1520703150.931 [CBIT](ERROR): Communications Fault in component: BPC1
2018-03-10T17:32:31.284Z,1520703151.284 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:32:31.692Z,1520703151.692 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:32:32.092Z,1520703152.092 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:32:32.140Z,1520703152.140 [CBIT](INFO): Clearing failed state for component BPC1
2018-03-10T17:32:32.140Z,1520703152.140 [BPC1] No Fault, FailCount= 1
2018-03-10T17:32:32.482Z,1520703152.482 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:32:32.888Z,1520703152.888 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:32:33.292Z,1520703153.292 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:32:33.688Z,1520703153.688 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:32:34.083Z,1520703154.083 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:32:34.491Z,1520703154.491 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:32:34.894Z,1520703154.894 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:32:35.301Z,1520703155.301 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:32:35.700Z,1520703155.700 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:32:36.093Z,1520703156.093 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:32:36.493Z,1520703156.493 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:32:36.905Z,1520703156.905 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:32:37.289Z,1520703157.289 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:32:37.697Z,1520703157.697 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:32:38.097Z,1520703158.097 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:32:38.491Z,1520703158.491 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:32:38.896Z,1520703158.896 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:32:39.294Z,1520703159.294 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:32:39.697Z,1520703159.697 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:32:40.094Z,1520703160.094 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:32:40.500Z,1520703160.500 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:32:40.891Z,1520703160.891 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:32:41.292Z,1520703161.292 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:32:41.698Z,1520703161.698 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:32:42.096Z,1520703162.096 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:32:42.507Z,1520703162.507 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:32:42.900Z,1520703162.900 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:32:43.291Z,1520703163.291 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:32:43.698Z,1520703163.698 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:32:44.101Z,1520703164.101 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:32:44.502Z,1520703164.502 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:32:44.903Z,1520703164.903 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:32:45.292Z,1520703165.292 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:32:45.702Z,1520703165.702 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:32:46.098Z,1520703166.098 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:32:46.481Z,1520703166.481 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:32:46.901Z,1520703166.901 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:32:47.292Z,1520703167.292 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:32:47.684Z,1520703167.684 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:32:48.097Z,1520703168.097 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:32:48.497Z,1520703168.497 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:32:48.901Z,1520703168.901 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:32:49.297Z,1520703169.297 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:32:49.708Z,1520703169.708 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:32:50.084Z,1520703170.084 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:32:50.487Z,1520703170.487 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:32:50.888Z,1520703170.888 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:32:51.285Z,1520703171.285 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:32:51.687Z,1520703171.687 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:32:52.092Z,1520703172.092 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:32:52.482Z,1520703172.482 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:32:52.884Z,1520703172.884 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:32:53.288Z,1520703173.288 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:32:53.692Z,1520703173.692 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:32:54.092Z,1520703174.092 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:32:54.488Z,1520703174.488 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:32:54.888Z,1520703174.888 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:32:55.293Z,1520703175.293 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:32:55.704Z,1520703175.704 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:32:56.093Z,1520703176.093 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:32:56.488Z,1520703176.488 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:32:56.897Z,1520703176.897 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:32:57.293Z,1520703177.293 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:32:57.695Z,1520703177.695 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:32:58.096Z,1520703178.096 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:32:58.490Z,1520703178.490 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:32:58.892Z,1520703178.892 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:32:59.296Z,1520703179.296 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:32:59.695Z,1520703179.695 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:33:00.097Z,1520703180.097 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:33:00.495Z,1520703180.495 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:33:00.896Z,1520703180.896 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:33:01.296Z,1520703181.296 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:33:01.702Z,1520703181.702 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:33:02.094Z,1520703182.094 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:33:02.496Z,1520703182.496 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:33:02.900Z,1520703182.900 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:33:02.908Z,1520703182.908 [BPC1](FAULT): Failed to initialize
2018-03-10T17:33:02.908Z,1520703182.908 [BPC1] Communications Fault, FailCount= 2
2018-03-10T17:33:02.908Z,1520703182.908 [BPC1](ERROR): Communications Fault
2018-03-10T17:33:02.930Z,1520703182.930 [CBIT](ERROR): Communications Fault in component: BPC1
2018-03-10T17:33:06.040Z,1520703186.040 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:33:06.156Z,1520703186.156 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:33:06.516Z,1520703186.516 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:33:06.591Z,1520703186.591 [CBIT](INFO): Clearing failed state for component BPC1
2018-03-10T17:33:06.591Z,1520703186.591 [BPC1] No Fault, FailCount= 2
2018-03-10T17:33:06.915Z,1520703186.915 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:33:07.324Z,1520703187.324 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:33:07.720Z,1520703187.720 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:33:08.098Z,1520703188.098 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:33:08.512Z,1520703188.512 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:33:08.921Z,1520703188.921 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:33:09.298Z,1520703189.298 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:33:09.705Z,1520703189.705 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:33:10.104Z,1520703190.104 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:33:10.501Z,1520703190.501 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:33:10.904Z,1520703190.904 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:33:11.307Z,1520703191.307 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:33:11.709Z,1520703191.709 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:33:12.111Z,1520703192.111 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:33:12.510Z,1520703192.510 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:33:12.913Z,1520703192.913 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:33:13.313Z,1520703193.313 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:33:13.721Z,1520703193.721 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:33:14.111Z,1520703194.111 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:33:14.509Z,1520703194.509 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:33:14.912Z,1520703194.912 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:33:15.308Z,1520703195.308 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:33:15.712Z,1520703195.712 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:33:16.110Z,1520703196.110 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:33:16.509Z,1520703196.509 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:33:16.912Z,1520703196.912 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:33:17.308Z,1520703197.308 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:33:17.708Z,1520703197.708 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:33:18.112Z,1520703198.112 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:33:18.522Z,1520703198.522 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:33:18.899Z,1520703198.899 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:33:19.313Z,1520703199.313 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:33:19.724Z,1520703199.724 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:33:20.104Z,1520703200.104 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:33:20.504Z,1520703200.504 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:33:20.904Z,1520703200.904 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:33:21.305Z,1520703201.305 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:33:21.716Z,1520703201.716 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:33:22.104Z,1520703202.104 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:33:22.500Z,1520703202.500 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:33:22.904Z,1520703202.904 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:33:23.326Z,1520703203.326 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:33:23.705Z,1520703203.705 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:33:24.110Z,1520703204.110 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:33:24.506Z,1520703204.506 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:33:24.901Z,1520703204.901 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:33:25.304Z,1520703205.304 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:33:25.713Z,1520703205.713 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:33:26.105Z,1520703206.105 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:33:26.511Z,1520703206.511 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:33:26.910Z,1520703206.910 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:33:27.312Z,1520703207.312 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:33:27.710Z,1520703207.710 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:33:28.121Z,1520703208.121 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:33:28.514Z,1520703208.514 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:33:28.916Z,1520703208.916 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:33:29.312Z,1520703209.312 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:33:29.707Z,1520703209.707 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:33:30.108Z,1520703210.108 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:33:30.521Z,1520703210.521 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:33:30.901Z,1520703210.901 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:33:31.300Z,1520703211.300 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:33:31.724Z,1520703211.724 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:33:32.100Z,1520703212.100 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:33:32.502Z,1520703212.502 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:33:32.926Z,1520703212.926 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:33:33.300Z,1520703213.300 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:33:33.700Z,1520703213.700 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:33:34.104Z,1520703214.104 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:33:34.504Z,1520703214.504 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:33:34.903Z,1520703214.903 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:33:35.316Z,1520703215.316 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:33:35.705Z,1520703215.705 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:33:36.113Z,1520703216.113 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:33:36.512Z,1520703216.512 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:33:36.913Z,1520703216.913 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:33:37.310Z,1520703217.310 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:33:37.318Z,1520703217.318 [BPC1](FAULT): Failed to initialize
2018-03-10T17:33:37.318Z,1520703217.318 [BPC1] Communications Fault, FailCount= 3
2018-03-10T17:33:37.318Z,1520703217.318 [BPC1](ERROR): Communications Fault
2018-03-10T17:33:37.341Z,1520703217.341 [CBIT](ERROR): Communications Fault in component: BPC1
2018-03-10T17:33:37.722Z,1520703217.722 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:33:38.099Z,1520703218.099 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:33:38.501Z,1520703218.501 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:33:38.563Z,1520703218.563 [CBIT](INFO): Clearing failed state for component BPC1
2018-03-10T17:33:38.563Z,1520703218.563 [BPC1] No Fault, FailCount= 3
2018-03-10T17:33:38.904Z,1520703218.904 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:33:39.304Z,1520703219.304 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:33:39.700Z,1520703219.700 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:33:40.124Z,1520703220.124 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:33:40.504Z,1520703220.504 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:33:40.900Z,1520703220.900 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:33:41.304Z,1520703221.304 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:33:41.703Z,1520703221.703 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:33:42.099Z,1520703222.099 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:33:42.505Z,1520703222.505 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:33:42.899Z,1520703222.899 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:33:43.299Z,1520703223.299 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:33:43.704Z,1520703223.704 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:33:44.100Z,1520703224.100 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:33:44.502Z,1520703224.502 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:33:44.907Z,1520703224.907 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:33:45.304Z,1520703225.304 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:33:45.704Z,1520703225.704 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:33:46.104Z,1520703226.104 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:33:46.499Z,1520703226.499 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:33:46.904Z,1520703226.904 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:33:47.315Z,1520703227.315 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:33:47.703Z,1520703227.703 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:33:48.104Z,1520703228.104 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:33:48.509Z,1520703228.509 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:33:48.909Z,1520703228.909 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:33:49.310Z,1520703229.310 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:33:49.709Z,1520703229.709 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:33:50.107Z,1520703230.107 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:33:50.512Z,1520703230.512 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:33:50.908Z,1520703230.908 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:33:51.314Z,1520703231.314 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:33:51.711Z,1520703231.711 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:33:52.113Z,1520703232.113 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:33:52.508Z,1520703232.508 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:33:52.907Z,1520703232.907 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:33:53.321Z,1520703233.321 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:33:53.709Z,1520703233.709 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:33:54.109Z,1520703234.109 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:33:54.521Z,1520703234.521 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:33:54.900Z,1520703234.900 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:33:55.302Z,1520703235.302 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:33:55.707Z,1520703235.707 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:33:56.099Z,1520703236.099 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:33:56.499Z,1520703236.499 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:33:56.908Z,1520703236.908 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:33:57.299Z,1520703237.299 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:33:57.716Z,1520703237.716 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:33:58.104Z,1520703238.104 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:33:58.504Z,1520703238.504 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:33:58.901Z,1520703238.901 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:33:59.324Z,1520703239.324 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:33:59.704Z,1520703239.704 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:34:00.100Z,1520703240.100 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:34:00.504Z,1520703240.504 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:34:00.905Z,1520703240.905 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:34:01.302Z,1520703241.302 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:34:01.705Z,1520703241.705 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:34:02.105Z,1520703242.105 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:34:02.504Z,1520703242.504 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:34:02.905Z,1520703242.905 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:34:06.163Z,1520703246.163 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:34:06.291Z,1520703246.291 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:34:06.662Z,1520703246.662 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:34:07.057Z,1520703247.057 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:34:07.458Z,1520703247.458 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:34:07.858Z,1520703247.858 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:34:08.255Z,1520703248.255 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:34:08.656Z,1520703248.656 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:34:09.063Z,1520703249.063 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:34:09.072Z,1520703249.072 [BPC1](FAULT): Failed to initialize
2018-03-10T17:34:09.072Z,1520703249.072 [BPC1] Communications Fault, FailCount= 4
2018-03-10T17:34:09.072Z,1520703249.072 [BPC1](ERROR): Communications Fault
2018-03-10T17:34:09.094Z,1520703249.094 [CBIT](ERROR): Communications Fault in component: BPC1
2018-03-10T17:34:09.448Z,1520703249.448 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:34:09.864Z,1520703249.864 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:34:10.265Z,1520703250.265 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:34:10.295Z,1520703250.295 [CBIT](INFO): Clearing failed state for component BPC1
2018-03-10T17:34:10.295Z,1520703250.295 [BPC1] No Fault, FailCount= 4
2018-03-10T17:34:10.648Z,1520703250.648 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:34:11.064Z,1520703251.064 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:34:11.452Z,1520703251.452 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:34:11.866Z,1520703251.866 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:34:12.257Z,1520703252.257 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:34:12.658Z,1520703252.658 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:34:13.057Z,1520703253.057 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:34:13.457Z,1520703253.457 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:34:13.872Z,1520703253.872 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:34:14.265Z,1520703254.265 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:34:14.646Z,1520703254.646 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:34:15.057Z,1520703255.057 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:34:15.452Z,1520703255.452 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:34:15.853Z,1520703255.853 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:34:16.269Z,1520703256.269 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:34:16.651Z,1520703256.651 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:34:17.049Z,1520703257.049 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:34:17.457Z,1520703257.457 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:34:17.855Z,1520703257.855 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:34:18.249Z,1520703258.249 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:34:18.665Z,1520703258.665 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:34:19.056Z,1520703259.056 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:34:19.460Z,1520703259.460 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:34:19.861Z,1520703259.861 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:34:20.255Z,1520703260.255 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:34:20.650Z,1520703260.650 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:34:21.070Z,1520703261.070 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:34:21.456Z,1520703261.456 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:34:21.852Z,1520703261.852 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:34:22.252Z,1520703262.252 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:34:22.656Z,1520703262.656 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:34:23.053Z,1520703263.053 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:34:23.456Z,1520703263.456 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:34:23.861Z,1520703263.861 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:34:24.257Z,1520703264.257 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:34:24.665Z,1520703264.665 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:34:25.064Z,1520703265.064 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:34:25.446Z,1520703265.446 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:34:25.872Z,1520703265.872 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:34:26.248Z,1520703266.248 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:34:26.650Z,1520703266.650 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:34:27.048Z,1520703267.048 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:34:27.447Z,1520703267.447 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:34:27.858Z,1520703267.858 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:34:28.260Z,1520703268.260 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:34:28.660Z,1520703268.660 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:34:29.048Z,1520703269.048 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:34:29.454Z,1520703269.454 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:34:29.857Z,1520703269.857 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:34:30.259Z,1520703270.259 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:34:30.661Z,1520703270.661 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:34:31.057Z,1520703271.057 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:34:31.460Z,1520703271.460 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:34:31.857Z,1520703271.857 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:34:32.260Z,1520703272.260 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:34:32.668Z,1520703272.668 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:34:33.057Z,1520703273.057 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:34:33.461Z,1520703273.461 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:34:33.861Z,1520703273.861 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:34:34.258Z,1520703274.258 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:34:34.660Z,1520703274.660 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:34:35.068Z,1520703275.068 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:34:35.452Z,1520703275.452 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:34:35.856Z,1520703275.856 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:34:36.257Z,1520703276.257 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:34:36.651Z,1520703276.651 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:34:37.055Z,1520703277.055 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:34:37.450Z,1520703277.450 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:34:37.852Z,1520703277.852 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:34:38.252Z,1520703278.252 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:34:38.646Z,1520703278.646 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:34:39.051Z,1520703279.051 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:34:39.469Z,1520703279.469 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:34:39.856Z,1520703279.856 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:34:40.269Z,1520703280.269 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:34:40.656Z,1520703280.656 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:34:41.068Z,1520703281.068 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:34:41.472Z,1520703281.472 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:34:41.853Z,1520703281.853 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:34:42.252Z,1520703282.252 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:34:42.661Z,1520703282.661 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:34:43.059Z,1520703283.059 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:34:43.078Z,1520703283.078 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T17:34:43.078Z,1520703283.078 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 1
2018-03-10T17:34:43.078Z,1520703283.078 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-10T17:34:43.120Z,1520703283.120 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-10T17:34:43.458Z,1520703283.458 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:34:43.532Z,1520703283.532 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-10T17:34:43.532Z,1520703283.532 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 1
2018-03-10T17:34:43.864Z,1520703283.864 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:34:43.881Z,1520703283.881 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-10T17:34:43.881Z,1520703283.881 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-10T17:34:43.882Z,1520703283.882 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-10T17:34:44.260Z,1520703284.260 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:34:44.647Z,1520703284.647 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:34:45.051Z,1520703285.051 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:34:45.456Z,1520703285.456 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:34:45.853Z,1520703285.853 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:34:46.255Z,1520703286.255 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:34:46.652Z,1520703286.652 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:34:47.064Z,1520703287.064 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:34:47.457Z,1520703287.457 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:34:47.861Z,1520703287.861 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:34:48.257Z,1520703288.257 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:34:48.664Z,1520703288.664 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:34:49.064Z,1520703289.064 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:34:49.447Z,1520703289.447 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:34:49.858Z,1520703289.858 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:34:50.259Z,1520703290.259 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:34:50.658Z,1520703290.658 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:34:51.056Z,1520703291.056 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:34:51.456Z,1520703291.456 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:34:51.860Z,1520703291.860 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:34:52.262Z,1520703292.262 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:34:52.666Z,1520703292.666 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:34:53.057Z,1520703293.057 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:34:53.466Z,1520703293.466 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:34:53.852Z,1520703293.852 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:34:54.258Z,1520703294.258 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:34:54.664Z,1520703294.664 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:34:55.066Z,1520703295.066 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:34:55.462Z,1520703295.462 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:34:55.855Z,1520703295.855 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:34:56.252Z,1520703296.252 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:34:56.661Z,1520703296.661 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:34:57.058Z,1520703297.058 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:34:57.462Z,1520703297.462 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:34:57.858Z,1520703297.858 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:34:58.259Z,1520703298.259 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:34:58.659Z,1520703298.659 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:34:59.060Z,1520703299.060 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:34:59.458Z,1520703299.458 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:34:59.847Z,1520703299.847 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:35:00.252Z,1520703300.252 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:35:00.651Z,1520703300.651 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:35:01.052Z,1520703301.052 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:35:01.456Z,1520703301.456 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:35:01.859Z,1520703301.859 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:35:02.261Z,1520703302.261 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:35:02.661Z,1520703302.661 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:35:03.056Z,1520703303.056 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:35:06.242Z,1520703306.242 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:35:06.372Z,1520703306.372 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:35:06.726Z,1520703306.726 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:35:07.118Z,1520703307.118 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:35:07.551Z,1520703307.551 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:35:07.926Z,1520703307.926 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:35:08.330Z,1520703308.330 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:35:08.724Z,1520703308.724 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:35:09.145Z,1520703309.145 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:35:09.537Z,1520703309.537 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:35:09.917Z,1520703309.917 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:35:10.326Z,1520703310.326 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:35:10.737Z,1520703310.737 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:35:11.122Z,1520703311.122 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:35:11.522Z,1520703311.522 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:35:11.919Z,1520703311.919 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:35:12.325Z,1520703312.325 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:35:12.721Z,1520703312.721 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:35:13.125Z,1520703313.125 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:35:13.518Z,1520703313.518 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:35:13.923Z,1520703313.923 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:35:14.326Z,1520703314.326 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:35:14.747Z,1520703314.747 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:35:15.131Z,1520703315.131 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:35:15.531Z,1520703315.531 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:35:15.937Z,1520703315.937 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:35:16.338Z,1520703316.338 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:35:16.725Z,1520703316.725 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:35:17.138Z,1520703317.138 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:35:17.514Z,1520703317.514 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:35:17.933Z,1520703317.933 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:35:18.338Z,1520703318.338 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:35:18.713Z,1520703318.713 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:35:19.134Z,1520703319.134 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:35:19.517Z,1520703319.517 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:35:19.916Z,1520703319.916 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:35:20.325Z,1520703320.325 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:35:20.722Z,1520703320.722 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:35:21.128Z,1520703321.128 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:35:21.519Z,1520703321.519 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:35:21.918Z,1520703321.918 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:35:22.318Z,1520703322.318 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:35:22.741Z,1520703322.741 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:35:23.132Z,1520703323.132 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:35:23.533Z,1520703323.533 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:35:23.933Z,1520703323.933 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:35:24.341Z,1520703324.341 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:35:24.722Z,1520703324.722 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:35:25.148Z,1520703325.148 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:35:25.520Z,1520703325.520 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:35:25.929Z,1520703325.929 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:35:26.341Z,1520703326.341 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:35:26.729Z,1520703326.729 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:35:27.130Z,1520703327.130 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:35:27.524Z,1520703327.524 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:35:27.934Z,1520703327.934 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:35:28.328Z,1520703328.328 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:35:28.722Z,1520703328.722 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:35:29.116Z,1520703329.116 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:35:29.519Z,1520703329.519 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:35:29.909Z,1520703329.909 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:35:30.352Z,1520703330.352 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:35:30.739Z,1520703330.739 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:35:31.136Z,1520703331.136 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:35:31.537Z,1520703331.537 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:35:31.943Z,1520703331.943 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:35:32.319Z,1520703332.319 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:35:32.750Z,1520703332.750 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:35:33.130Z,1520703333.130 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:35:33.547Z,1520703333.547 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:35:33.930Z,1520703333.930 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:35:34.328Z,1520703334.328 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:35:34.724Z,1520703334.724 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:35:35.127Z,1520703335.127 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:35:35.529Z,1520703335.529 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:35:35.930Z,1520703335.930 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:35:36.326Z,1520703336.326 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:35:36.722Z,1520703336.722 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:35:37.129Z,1520703337.129 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:35:37.540Z,1520703337.540 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:35:37.929Z,1520703337.929 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:35:38.336Z,1520703338.336 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:35:38.722Z,1520703338.722 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:35:39.138Z,1520703339.138 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:35:39.533Z,1520703339.533 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:35:39.951Z,1520703339.951 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:35:40.319Z,1520703340.319 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:35:40.734Z,1520703340.734 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:35:41.153Z,1520703341.153 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:35:41.526Z,1520703341.526 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:35:41.930Z,1520703341.930 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:35:42.324Z,1520703342.324 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:35:42.727Z,1520703342.727 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:35:43.124Z,1520703343.124 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:35:43.525Z,1520703343.525 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:35:43.583Z,1520703343.583 [CBIT](DEBUG): EFC running - data check-sum false
2018-03-10T17:35:43.924Z,1520703343.924 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:35:44.323Z,1520703344.323 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:35:44.726Z,1520703344.726 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:35:45.144Z,1520703345.144 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:35:45.555Z,1520703345.555 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:35:45.955Z,1520703345.955 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:35:46.318Z,1520703346.318 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:35:46.741Z,1520703346.741 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:35:47.148Z,1520703347.148 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:35:47.537Z,1520703347.537 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:35:47.935Z,1520703347.935 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:35:48.321Z,1520703348.321 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:35:48.740Z,1520703348.740 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:35:49.113Z,1520703349.113 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:35:49.522Z,1520703349.522 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:35:49.922Z,1520703349.922 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:35:50.320Z,1520703350.320 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:35:50.733Z,1520703350.733 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:35:51.126Z,1520703351.126 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:35:51.521Z,1520703351.521 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:35:51.923Z,1520703351.923 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:35:52.321Z,1520703352.321 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:35:52.718Z,1520703352.718 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:35:53.144Z,1520703353.144 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:35:53.546Z,1520703353.546 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:35:53.928Z,1520703353.928 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:35:54.331Z,1520703354.331 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:35:54.736Z,1520703354.736 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:35:55.109Z,1520703355.109 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:35:55.543Z,1520703355.543 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:35:55.926Z,1520703355.926 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:35:56.329Z,1520703356.329 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:35:56.737Z,1520703356.737 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:35:57.130Z,1520703357.130 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:35:57.518Z,1520703357.518 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:35:57.928Z,1520703357.928 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:35:58.325Z,1520703358.325 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:35:58.734Z,1520703358.734 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:35:59.116Z,1520703359.116 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:35:59.519Z,1520703359.519 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:35:59.922Z,1520703359.922 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:36:00.318Z,1520703360.318 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:36:00.732Z,1520703360.732 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:36:01.147Z,1520703361.147 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:36:01.528Z,1520703361.528 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:36:01.920Z,1520703361.920 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:36:02.336Z,1520703362.336 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:36:02.728Z,1520703362.728 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:36:03.113Z,1520703363.113 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:36:06.337Z,1520703366.337 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:36:06.466Z,1520703366.466 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:36:06.817Z,1520703366.817 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:36:07.216Z,1520703367.216 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:36:07.612Z,1520703367.612 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:36:08.013Z,1520703368.013 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:36:08.414Z,1520703368.414 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:36:08.813Z,1520703368.813 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:36:09.217Z,1520703369.217 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:36:09.615Z,1520703369.615 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:36:10.015Z,1520703370.015 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:36:10.414Z,1520703370.414 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:36:10.819Z,1520703370.819 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:36:11.209Z,1520703371.209 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:36:11.616Z,1520703371.616 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:36:12.014Z,1520703372.014 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:36:12.417Z,1520703372.417 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:36:12.816Z,1520703372.816 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:36:13.220Z,1520703373.220 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:36:13.616Z,1520703373.616 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:36:14.014Z,1520703374.014 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:36:14.421Z,1520703374.421 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:36:14.815Z,1520703374.815 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:36:15.226Z,1520703375.226 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:36:15.604Z,1520703375.604 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:36:16.015Z,1520703376.015 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:36:16.415Z,1520703376.415 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:36:16.804Z,1520703376.804 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:36:17.204Z,1520703377.204 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:36:17.608Z,1520703377.608 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:36:18.004Z,1520703378.004 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:36:18.404Z,1520703378.404 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:36:18.811Z,1520703378.811 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:36:19.203Z,1520703379.203 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:36:19.604Z,1520703379.604 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:36:20.012Z,1520703380.012 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:36:20.403Z,1520703380.403 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:36:20.807Z,1520703380.807 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:36:21.207Z,1520703381.207 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:36:21.612Z,1520703381.612 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:36:22.016Z,1520703382.016 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:36:22.418Z,1520703382.418 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:36:22.818Z,1520703382.818 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:36:23.218Z,1520703383.218 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:36:23.624Z,1520703383.624 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:36:24.009Z,1520703384.009 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:36:24.418Z,1520703384.418 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:36:24.822Z,1520703384.822 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:36:25.217Z,1520703385.217 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:36:25.621Z,1520703385.621 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:36:26.021Z,1520703386.020 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:36:26.421Z,1520703386.421 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:36:26.820Z,1520703386.820 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:36:27.217Z,1520703387.217 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:36:27.618Z,1520703387.618 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:36:28.012Z,1520703388.012 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:36:28.416Z,1520703388.416 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:36:28.803Z,1520703388.803 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:36:29.207Z,1520703389.207 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:36:29.608Z,1520703389.608 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:36:30.008Z,1520703390.008 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:36:30.412Z,1520703390.412 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:36:30.808Z,1520703390.808 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:36:31.204Z,1520703391.204 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:36:31.606Z,1520703391.606 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:36:32.008Z,1520703392.008 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:36:32.404Z,1520703392.404 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:36:32.812Z,1520703392.812 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:36:33.208Z,1520703393.208 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:36:33.604Z,1520703393.604 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:36:34.007Z,1520703394.007 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:36:34.408Z,1520703394.408 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:36:34.803Z,1520703394.803 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:36:35.204Z,1520703395.204 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:36:35.608Z,1520703395.608 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:36:36.012Z,1520703396.012 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:36:36.409Z,1520703396.409 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:36:36.808Z,1520703396.808 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:36:37.212Z,1520703397.212 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:36:37.604Z,1520703397.604 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:36:38.012Z,1520703398.012 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:36:38.404Z,1520703398.404 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:36:38.812Z,1520703398.812 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:36:39.213Z,1520703399.213 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:36:39.613Z,1520703399.613 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:36:40.016Z,1520703400.016 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:36:40.420Z,1520703400.420 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:36:40.812Z,1520703400.812 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:36:41.217Z,1520703401.217 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:36:41.624Z,1520703401.624 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:36:42.013Z,1520703402.013 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:36:42.415Z,1520703402.415 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:36:42.816Z,1520703402.816 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:36:43.216Z,1520703403.216 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:36:43.613Z,1520703403.613 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:36:44.015Z,1520703404.015 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:36:44.415Z,1520703404.415 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:36:44.817Z,1520703404.817 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:36:45.216Z,1520703405.216 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:36:45.619Z,1520703405.619 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:36:46.020Z,1520703406.020 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:36:46.415Z,1520703406.415 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:36:46.816Z,1520703406.816 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:36:47.215Z,1520703407.215 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:36:47.616Z,1520703407.616 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:36:48.017Z,1520703408.017 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:36:48.416Z,1520703408.416 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:36:48.816Z,1520703408.816 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:36:49.214Z,1520703409.214 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:36:49.619Z,1520703409.619 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:36:50.020Z,1520703410.020 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:36:50.416Z,1520703410.416 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:36:50.817Z,1520703410.817 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:36:51.216Z,1520703411.216 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:36:51.612Z,1520703411.612 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:36:52.012Z,1520703412.012 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:36:52.408Z,1520703412.408 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:36:52.809Z,1520703412.809 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:36:53.208Z,1520703413.208 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:36:53.608Z,1520703413.608 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:36:54.008Z,1520703414.008 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:36:54.407Z,1520703414.407 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:36:54.808Z,1520703414.808 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:36:55.212Z,1520703415.212 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:36:55.609Z,1520703415.609 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:36:56.008Z,1520703416.008 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:36:56.416Z,1520703416.416 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:36:56.816Z,1520703416.816 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:36:57.217Z,1520703417.217 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:36:57.618Z,1520703417.618 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:36:58.020Z,1520703418.020 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:36:58.417Z,1520703418.417 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:36:58.820Z,1520703418.820 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:36:59.215Z,1520703419.215 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:36:59.621Z,1520703419.621 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:37:00.021Z,1520703420.021 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:37:00.421Z,1520703420.421 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:37:00.821Z,1520703420.821 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:37:01.217Z,1520703421.217 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:37:01.617Z,1520703421.617 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:37:02.014Z,1520703422.014 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:37:02.417Z,1520703422.417 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:37:02.449Z,1520703422.450 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-03-10T17:37:02.450Z,1520703422.450 [Default:CheckIn:C.Wait] Stopped
2018-03-10T17:37:02.450Z,1520703422.450 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-03-10T17:37:02.450Z,1520703422.450 [Default:CheckIn:D] Running Loop=1
2018-03-10T17:37:02.804Z,1520703422.804 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:37:02.851Z,1520703422.851 [Default:CheckIn:D] Stopped
2018-03-10T17:37:02.851Z,1520703422.851 [Default:CheckIn:E] Running Loop=1
2018-03-10T17:37:03.211Z,1520703423.211 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:37:03.254Z,1520703423.254 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 737.748828 min 
2018-03-10T17:37:03.255Z,1520703423.255 [Default:CheckIn:E] Stopped
2018-03-10T17:37:03.255Z,1520703423.255 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-03-10T17:37:03.255Z,1520703423.255 [Default:CheckIn] Stopped
2018-03-10T17:37:03.255Z,1520703423.255 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-03-10T17:37:03.255Z,1520703423.255 [Default:CheckIn](INFO): Running loop #73
2018-03-10T17:37:03.255Z,1520703423.255 [Default:CheckIn] Running Loop=73
2018-03-10T17:37:03.255Z,1520703423.255 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-03-10T17:37:03.256Z,1520703423.256 [Default:CheckIn:Read_GPS] Running Loop=1
2018-03-10T17:37:06.446Z,1520703426.446 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:37:06.558Z,1520703426.558 [NAL9602](INFO): Powering up
2018-03-10T17:37:06.575Z,1520703426.575 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:37:06.965Z,1520703426.965 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:37:07.358Z,1520703427.358 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:37:07.766Z,1520703427.766 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:37:08.160Z,1520703428.160 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:37:08.558Z,1520703428.558 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:37:08.949Z,1520703428.949 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:37:09.352Z,1520703429.352 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:37:09.756Z,1520703429.756 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:37:10.148Z,1520703430.148 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:37:10.548Z,1520703430.548 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:37:10.952Z,1520703430.952 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:37:11.350Z,1520703431.350 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:37:11.760Z,1520703431.760 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:37:12.161Z,1520703432.161 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:37:12.562Z,1520703432.562 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:37:12.960Z,1520703432.960 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:37:13.364Z,1520703433.364 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:37:13.759Z,1520703433.759 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:37:14.160Z,1520703434.160 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:37:14.565Z,1520703434.565 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:37:14.964Z,1520703434.964 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:37:15.356Z,1520703435.356 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:37:15.757Z,1520703435.757 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:37:16.158Z,1520703436.158 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:37:16.560Z,1520703436.560 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:37:16.958Z,1520703436.958 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:37:17.375Z,1520703437.375 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:37:17.740Z,1520703437.740 [NAL9602](INFO): NAL9602 initialized
2018-03-10T17:37:17.770Z,1520703437.770 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:37:18.161Z,1520703438.161 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:37:18.573Z,1520703438.573 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:37:18.976Z,1520703438.976 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:37:19.376Z,1520703439.376 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:37:19.753Z,1520703439.753 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:37:20.177Z,1520703440.177 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:37:20.558Z,1520703440.558 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:37:20.980Z,1520703440.980 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:37:21.375Z,1520703441.375 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:37:21.760Z,1520703441.760 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:37:22.153Z,1520703442.153 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:37:22.557Z,1520703442.557 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:37:22.952Z,1520703442.952 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:37:23.361Z,1520703443.361 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:37:23.756Z,1520703443.756 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:37:24.160Z,1520703444.160 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:37:24.554Z,1520703444.554 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:37:24.961Z,1520703444.961 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:37:25.360Z,1520703445.360 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:37:25.767Z,1520703445.767 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:37:26.170Z,1520703446.170 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:37:26.573Z,1520703446.573 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:37:26.972Z,1520703446.972 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:37:27.353Z,1520703447.353 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:37:27.752Z,1520703447.752 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:37:28.149Z,1520703448.149 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:37:28.553Z,1520703448.553 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:37:28.952Z,1520703448.952 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:37:29.349Z,1520703449.349 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:37:29.748Z,1520703449.748 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:37:30.148Z,1520703450.148 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:37:30.549Z,1520703450.549 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:37:30.967Z,1520703450.967 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:37:31.363Z,1520703451.363 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:37:31.767Z,1520703451.767 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:37:32.188Z,1520703452.188 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:37:32.552Z,1520703452.552 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:37:32.958Z,1520703452.958 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:37:33.368Z,1520703453.368 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:37:33.764Z,1520703453.764 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:37:34.157Z,1520703454.157 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:37:34.556Z,1520703454.556 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:37:34.957Z,1520703454.957 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:37:35.361Z,1520703455.361 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:37:35.767Z,1520703455.767 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:37:36.166Z,1520703456.166 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:37:36.562Z,1520703456.562 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:37:36.961Z,1520703456.961 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:37:37.356Z,1520703457.356 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:37:37.765Z,1520703457.765 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:37:38.170Z,1520703458.170 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:37:38.560Z,1520703458.560 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:37:38.971Z,1520703458.971 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:37:39.372Z,1520703459.372 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:37:39.772Z,1520703459.772 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:37:40.172Z,1520703460.172 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:37:40.559Z,1520703460.559 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:37:40.952Z,1520703460.952 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:37:41.363Z,1520703461.363 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:37:41.764Z,1520703461.764 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:37:42.148Z,1520703462.148 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:37:42.568Z,1520703462.568 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:37:42.953Z,1520703462.953 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:37:43.364Z,1520703463.364 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:37:43.781Z,1520703463.781 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:37:44.170Z,1520703464.170 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:37:44.204Z,1520703464.204 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T17:37:44.204Z,1520703464.204 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 2
2018-03-10T17:37:44.204Z,1520703464.204 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-10T17:37:44.241Z,1520703464.241 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-10T17:37:44.553Z,1520703464.553 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:37:44.611Z,1520703464.611 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-10T17:37:44.612Z,1520703464.612 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 2
2018-03-10T17:37:44.953Z,1520703464.953 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:37:44.990Z,1520703464.990 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-10T17:37:44.991Z,1520703464.991 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-10T17:37:44.992Z,1520703464.992 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-10T17:37:45.371Z,1520703465.371 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:37:45.752Z,1520703465.752 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:37:46.153Z,1520703466.153 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:37:46.556Z,1520703466.556 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:37:46.952Z,1520703466.952 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:37:47.384Z,1520703467.384 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:37:47.763Z,1520703467.763 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:37:48.176Z,1520703468.176 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:37:48.563Z,1520703468.563 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:37:48.952Z,1520703468.952 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:37:49.349Z,1520703469.349 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:37:49.757Z,1520703469.757 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:37:50.153Z,1520703470.153 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:37:50.556Z,1520703470.556 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:37:50.958Z,1520703470.958 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:37:51.369Z,1520703471.369 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:37:51.761Z,1520703471.761 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:37:52.163Z,1520703472.163 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:37:52.563Z,1520703472.563 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:37:52.967Z,1520703472.967 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:37:53.362Z,1520703473.362 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:37:53.770Z,1520703473.770 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:37:54.158Z,1520703474.158 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:37:54.560Z,1520703474.560 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:37:54.962Z,1520703474.962 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:37:55.361Z,1520703475.361 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:37:55.763Z,1520703475.763 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:37:56.177Z,1520703476.177 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:37:56.577Z,1520703476.577 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:37:56.968Z,1520703476.968 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:37:57.373Z,1520703477.373 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:37:57.752Z,1520703477.752 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:37:58.150Z,1520703478.150 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:37:58.552Z,1520703478.552 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:37:58.965Z,1520703478.965 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:37:59.354Z,1520703479.354 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:37:59.753Z,1520703479.753 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:38:00.161Z,1520703480.161 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:38:00.561Z,1520703480.561 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:38:00.961Z,1520703480.961 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:38:01.358Z,1520703481.358 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:38:01.762Z,1520703481.762 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:38:02.162Z,1520703482.162 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:38:02.561Z,1520703482.561 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:38:02.961Z,1520703482.961 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:38:03.357Z,1520703483.357 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:38:06.657Z,1520703486.657 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:38:06.804Z,1520703486.804 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:38:07.173Z,1520703487.173 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:38:07.557Z,1520703487.557 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:38:07.973Z,1520703487.973 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:38:08.368Z,1520703488.368 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:38:08.757Z,1520703488.757 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:38:09.169Z,1520703489.169 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:38:09.574Z,1520703489.574 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:38:09.981Z,1520703489.981 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:38:10.357Z,1520703490.357 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:38:10.756Z,1520703490.756 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:38:11.156Z,1520703491.156 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:38:11.570Z,1520703491.570 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:38:11.963Z,1520703491.963 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:38:12.369Z,1520703492.369 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:38:12.759Z,1520703492.759 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:38:13.187Z,1520703493.187 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:38:13.564Z,1520703493.564 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:38:13.965Z,1520703493.965 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:38:14.361Z,1520703494.361 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:38:14.763Z,1520703494.763 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:38:15.163Z,1520703495.163 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:38:15.566Z,1520703495.566 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:38:15.967Z,1520703495.967 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:38:16.370Z,1520703496.370 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:38:16.769Z,1520703496.769 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:38:17.181Z,1520703497.181 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:38:17.583Z,1520703497.583 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:38:17.971Z,1520703497.971 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:38:18.366Z,1520703498.366 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:38:18.770Z,1520703498.770 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:38:19.157Z,1520703499.157 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:38:19.553Z,1520703499.553 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:38:19.969Z,1520703499.969 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:38:20.394Z,1520703500.394 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:38:20.768Z,1520703500.768 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:38:21.166Z,1520703501.166 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:38:21.569Z,1520703501.569 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:38:21.988Z,1520703501.988 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:38:22.370Z,1520703502.370 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:38:22.767Z,1520703502.767 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:38:23.167Z,1520703503.167 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:38:23.560Z,1520703503.560 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:38:23.971Z,1520703503.971 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:38:24.374Z,1520703504.374 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:38:24.793Z,1520703504.793 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:38:25.189Z,1520703505.189 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:38:25.557Z,1520703505.557 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:38:25.959Z,1520703505.959 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:38:26.357Z,1520703506.357 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:38:26.756Z,1520703506.756 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:38:27.176Z,1520703507.176 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:38:27.564Z,1520703507.564 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:38:27.957Z,1520703507.957 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:38:28.354Z,1520703508.354 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:38:28.757Z,1520703508.757 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:38:29.161Z,1520703509.161 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:38:29.561Z,1520703509.561 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:38:29.961Z,1520703509.961 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:38:30.363Z,1520703510.363 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:38:30.766Z,1520703510.766 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:38:31.170Z,1520703511.170 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:38:31.567Z,1520703511.567 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:38:31.964Z,1520703511.964 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:38:32.369Z,1520703512.369 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:38:32.769Z,1520703512.769 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:38:33.169Z,1520703513.169 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:38:33.573Z,1520703513.573 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:38:33.967Z,1520703513.967 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:38:34.372Z,1520703514.372 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:38:34.768Z,1520703514.768 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:38:35.162Z,1520703515.162 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:38:35.553Z,1520703515.553 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:38:35.970Z,1520703515.970 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:38:36.367Z,1520703516.367 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:38:36.753Z,1520703516.753 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:38:37.156Z,1520703517.156 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:38:37.553Z,1520703517.553 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:38:37.969Z,1520703517.969 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:38:38.357Z,1520703518.357 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:38:38.757Z,1520703518.757 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:38:39.180Z,1520703519.180 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:38:39.579Z,1520703519.579 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:38:39.978Z,1520703519.978 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:38:40.362Z,1520703520.362 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:38:40.761Z,1520703520.761 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:38:41.162Z,1520703521.162 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:38:41.566Z,1520703521.566 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:38:41.963Z,1520703521.963 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:38:42.366Z,1520703522.366 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:38:42.761Z,1520703522.761 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:38:43.169Z,1520703523.169 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:38:43.575Z,1520703523.575 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:38:43.976Z,1520703523.976 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:38:44.364Z,1520703524.364 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:38:44.765Z,1520703524.765 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:38:45.164Z,1520703525.164 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:38:45.561Z,1520703525.561 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:38:45.961Z,1520703525.961 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:38:46.353Z,1520703526.353 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:38:46.769Z,1520703526.769 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:38:47.157Z,1520703527.157 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:38:47.581Z,1520703527.581 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:38:47.981Z,1520703527.981 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:38:48.387Z,1520703528.387 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:38:48.756Z,1520703528.756 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:38:49.177Z,1520703529.177 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:38:49.553Z,1520703529.553 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:38:49.973Z,1520703529.973 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:38:50.357Z,1520703530.357 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:38:50.776Z,1520703530.776 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:38:51.171Z,1520703531.171 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:38:51.557Z,1520703531.557 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:38:51.961Z,1520703531.961 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:38:52.380Z,1520703532.380 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:38:52.775Z,1520703532.775 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:38:53.157Z,1520703533.157 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:38:53.561Z,1520703533.561 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:38:53.957Z,1520703533.957 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:38:54.357Z,1520703534.357 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:38:54.762Z,1520703534.762 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:38:55.160Z,1520703535.160 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:38:55.565Z,1520703535.565 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:38:55.974Z,1520703535.974 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:38:56.390Z,1520703536.390 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:38:56.761Z,1520703536.761 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:38:57.169Z,1520703537.169 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:38:57.562Z,1520703537.562 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:38:57.972Z,1520703537.972 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:38:58.370Z,1520703538.370 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:38:58.765Z,1520703538.765 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:38:59.173Z,1520703539.173 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:38:59.561Z,1520703539.561 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:38:59.965Z,1520703539.965 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:39:00.363Z,1520703540.363 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:39:00.759Z,1520703540.759 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:39:01.169Z,1520703541.169 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:39:01.553Z,1520703541.553 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:39:01.969Z,1520703541.969 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:39:02.364Z,1520703542.364 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:39:02.770Z,1520703542.770 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:39:03.177Z,1520703543.177 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:39:03.557Z,1520703543.557 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:39:06.798Z,1520703546.798 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:39:06.928Z,1520703546.928 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:39:07.293Z,1520703547.293 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:39:07.691Z,1520703547.691 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:39:08.095Z,1520703548.095 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:39:08.473Z,1520703548.473 [NAL9602](INFO): SBD MO Status=0, MOMSN=5838, MT Status=0, MTMSN=0
2018-03-10T17:39:08.473Z,1520703548.473 [NAL9602](INFO): No messages in MT queue
2018-03-10T17:39:08.474Z,1520703548.474 [NAL9602](INFO): Failure count cleared after critical for NAL9602
2018-03-10T17:39:08.512Z,1520703548.512 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:39:08.892Z,1520703548.892 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:39:09.304Z,1520703549.304 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:39:09.672Z,1520703549.672 [NAL9602](INFO): GPS fix at 20180310T173831: (21.315630, -157.877168)
2018-03-10T17:39:09.695Z,1520703549.695 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:39:09.740Z,1520703549.740 [Default:CheckIn:Read_GPS] Stopped
2018-03-10T17:39:09.740Z,1520703549.740 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-03-10T17:39:10.105Z,1520703550.105 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:39:10.634Z,1520703550.634 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:39:10.892Z,1520703550.892 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:39:14.236Z,1520703554.236 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:39:14.362Z,1520703554.362 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:39:14.752Z,1520703554.752 [DataOverHttps](INFO): Sending 62 bytes from file Logs/20180310T051512/Courier0292.lzma
2018-03-10T17:39:14.790Z,1520703554.790 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:39:15.184Z,1520703555.184 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:39:15.546Z,1520703555.546 [DataOverHttps](INFO): Moved sent file to Logs/20180310T051512/Courier0292.lzma.bak
2018-03-10T17:39:15.546Z,1520703555.546 [DataOverHttps](INFO): SBD MOMSN=8006675
2018-03-10T17:39:15.587Z,1520703555.587 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:39:16.251Z,1520703556.251 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:39:16.369Z,1520703556.369 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:39:16.773Z,1520703556.773 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:39:20.155Z,1520703560.155 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:39:20.285Z,1520703560.285 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:39:20.654Z,1520703560.654 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:39:21.055Z,1520703561.055 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:39:21.455Z,1520703561.455 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:39:21.850Z,1520703561.850 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:39:22.251Z,1520703562.251 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:39:25.500Z,1520703565.500 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:39:25.630Z,1520703565.630 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:39:25.995Z,1520703565.995 [DataOverHttps](INFO): Sending 158 bytes from file Logs/20180310T051512/Express0293.lzma
2018-03-10T17:39:26.028Z,1520703566.028 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:39:26.418Z,1520703566.418 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:39:26.794Z,1520703566.794 [DataOverHttps](INFO): Moved sent file to Logs/20180310T051512/Express0293.lzma.bak
2018-03-10T17:39:26.794Z,1520703566.794 [DataOverHttps](INFO): SBD MOMSN=8006678
2018-03-10T17:39:26.826Z,1520703566.826 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:39:27.480Z,1520703567.480 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:39:27.544Z,1520703567.544 [Default:CheckIn:Read_Iridium] Stopped
2018-03-10T17:39:27.544Z,1520703567.544 [Default:CheckIn:C.Wait] Running Loop=1
2018-03-10T17:39:27.544Z,1520703567.544 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-03-10T17:39:27.618Z,1520703567.618 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:39:28.016Z,1520703568.016 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:39:31.228Z,1520703571.228 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:39:31.342Z,1520703571.342 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:39:31.738Z,1520703571.738 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:39:32.143Z,1520703572.143 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:39:32.537Z,1520703572.537 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:39:32.936Z,1520703572.936 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:39:33.339Z,1520703573.339 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:39:33.736Z,1520703573.736 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:39:34.144Z,1520703574.144 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:39:34.536Z,1520703574.536 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:39:34.934Z,1520703574.934 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:39:35.332Z,1520703575.332 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:39:35.740Z,1520703575.740 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:39:36.124Z,1520703576.124 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:39:36.540Z,1520703576.540 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:39:36.924Z,1520703576.924 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:39:37.324Z,1520703577.324 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:39:37.738Z,1520703577.738 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:39:38.136Z,1520703578.136 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:39:38.538Z,1520703578.538 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:39:38.928Z,1520703578.928 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:39:39.328Z,1520703579.328 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:39:39.733Z,1520703579.733 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:39:40.158Z,1520703580.158 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:39:40.533Z,1520703580.533 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:39:40.933Z,1520703580.933 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:39:41.341Z,1520703581.341 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:39:41.736Z,1520703581.736 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:39:42.137Z,1520703582.137 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:39:42.532Z,1520703582.532 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:39:42.938Z,1520703582.938 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:39:43.342Z,1520703583.342 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:39:43.736Z,1520703583.736 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:39:44.136Z,1520703584.136 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:39:44.512Z,1520703584.512 [NAL9602](INFO): Powering down
2018-03-10T17:39:44.530Z,1520703584.530 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:39:44.931Z,1520703584.931 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:39:45.341Z,1520703585.341 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:39:45.748Z,1520703585.748 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:39:46.143Z,1520703586.143 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:39:46.529Z,1520703586.529 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:39:46.937Z,1520703586.937 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:39:47.351Z,1520703587.351 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:39:47.729Z,1520703587.729 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:39:48.130Z,1520703588.130 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:39:48.558Z,1520703588.558 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:39:48.930Z,1520703588.930 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:39:49.329Z,1520703589.329 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:39:49.733Z,1520703589.733 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:39:50.128Z,1520703590.128 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:39:50.528Z,1520703590.528 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:39:50.934Z,1520703590.934 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:39:51.340Z,1520703591.340 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:39:51.728Z,1520703591.728 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:39:52.128Z,1520703592.128 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:39:52.524Z,1520703592.524 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:39:52.932Z,1520703592.932 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:39:53.330Z,1520703593.330 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:39:53.729Z,1520703593.729 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:39:54.133Z,1520703594.133 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:39:54.535Z,1520703594.535 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:39:54.937Z,1520703594.937 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:39:55.332Z,1520703595.332 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:39:55.736Z,1520703595.736 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:39:56.134Z,1520703596.134 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:39:56.536Z,1520703596.536 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:39:56.936Z,1520703596.936 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:39:57.328Z,1520703597.328 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:39:57.741Z,1520703597.741 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:39:58.129Z,1520703598.129 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:39:58.527Z,1520703598.527 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:39:58.932Z,1520703598.932 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:39:59.328Z,1520703599.328 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:39:59.729Z,1520703599.729 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:40:00.130Z,1520703600.130 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:40:00.529Z,1520703600.529 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:40:00.924Z,1520703600.924 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:40:01.330Z,1520703601.330 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:40:01.728Z,1520703601.728 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:40:02.137Z,1520703602.137 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:40:02.537Z,1520703602.537 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:40:02.938Z,1520703602.938 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:40:03.333Z,1520703603.333 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:40:03.730Z,1520703603.730 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:40:03.754Z,1520703603.754 [BPC1](ERROR): Bank B: No match for stick 4 serial number:1717 in the onboard configuration file.
2018-03-10T17:40:03.754Z,1520703603.754 [BPC1](ERROR): Failed to parse Bank B battery data
2018-03-10T17:40:03.754Z,1520703603.754 [BPC1] Data Fault, FailCount= 1
2018-03-10T17:40:03.754Z,1520703603.754 [BPC1](ERROR): Data Fault
2018-03-10T17:40:03.855Z,1520703603.855 [CBIT](ERROR): Data Fault in component: BPC1
2018-03-10T17:40:04.130Z,1520703604.130 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:40:04.538Z,1520703604.538 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:40:04.939Z,1520703604.939 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:40:05.020Z,1520703605.020 [CBIT](INFO): Clearing failed state for component BPC1
2018-03-10T17:40:05.020Z,1520703605.020 [BPC1] No Fault, FailCount= 1
2018-03-10T17:40:05.336Z,1520703605.336 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:40:05.730Z,1520703605.730 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:40:06.127Z,1520703606.127 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:40:06.530Z,1520703606.530 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:40:06.930Z,1520703606.930 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:40:07.324Z,1520703607.324 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:40:07.735Z,1520703607.735 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:40:08.127Z,1520703608.127 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:40:08.531Z,1520703608.531 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:40:08.935Z,1520703608.935 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:40:09.335Z,1520703609.335 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:40:09.742Z,1520703609.742 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:40:10.136Z,1520703610.136 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:40:10.540Z,1520703610.540 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:40:10.932Z,1520703610.932 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:40:11.336Z,1520703611.336 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:40:11.740Z,1520703611.740 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:40:12.136Z,1520703612.136 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:40:12.537Z,1520703612.537 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:40:12.934Z,1520703612.934 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:40:13.324Z,1520703613.324 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:40:13.724Z,1520703613.724 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:40:14.132Z,1520703614.132 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:40:14.524Z,1520703614.524 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:40:14.928Z,1520703614.928 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:40:15.332Z,1520703615.332 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:40:15.731Z,1520703615.731 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:40:16.128Z,1520703616.128 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:40:16.532Z,1520703616.532 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:40:16.925Z,1520703616.925 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:40:17.329Z,1520703617.329 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:40:17.729Z,1520703617.729 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:40:18.127Z,1520703618.127 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:40:18.556Z,1520703618.556 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:40:18.930Z,1520703618.930 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:40:19.329Z,1520703619.329 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:40:19.728Z,1520703619.728 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:40:20.128Z,1520703620.128 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:40:20.528Z,1520703620.528 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:40:20.928Z,1520703620.928 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:40:21.332Z,1520703621.332 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:40:21.724Z,1520703621.724 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:40:22.128Z,1520703622.128 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:40:22.532Z,1520703622.532 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:40:22.927Z,1520703622.927 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:40:23.328Z,1520703623.328 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:40:23.732Z,1520703623.732 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:40:24.136Z,1520703624.136 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:40:24.535Z,1520703624.535 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:40:24.932Z,1520703624.932 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:40:25.333Z,1520703625.333 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:40:25.737Z,1520703625.737 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:40:26.137Z,1520703626.137 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:40:26.536Z,1520703626.536 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:40:26.936Z,1520703626.936 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:40:27.333Z,1520703627.333 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:40:27.736Z,1520703627.736 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:40:28.135Z,1520703628.135 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:40:31.440Z,1520703631.440 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:40:31.574Z,1520703631.574 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:40:31.946Z,1520703631.946 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:40:32.329Z,1520703632.329 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:40:32.728Z,1520703632.728 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:40:33.129Z,1520703633.129 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:40:33.529Z,1520703633.529 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:40:33.924Z,1520703633.924 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:40:34.323Z,1520703634.323 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:40:34.726Z,1520703634.726 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:40:35.127Z,1520703635.127 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:40:35.555Z,1520703635.555 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:40:35.941Z,1520703635.941 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:40:36.345Z,1520703636.345 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:40:36.745Z,1520703636.745 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:40:37.158Z,1520703637.158 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:40:37.562Z,1520703637.562 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:40:37.947Z,1520703637.947 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:40:38.356Z,1520703638.356 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:40:38.729Z,1520703638.729 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:40:39.133Z,1520703639.133 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:40:39.528Z,1520703639.528 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:40:39.929Z,1520703639.929 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:40:40.333Z,1520703640.333 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:40:40.728Z,1520703640.728 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:40:41.127Z,1520703641.127 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:40:41.531Z,1520703641.531 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:40:41.924Z,1520703641.924 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:40:42.347Z,1520703642.347 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:40:42.756Z,1520703642.756 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:40:43.150Z,1520703643.150 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:40:43.539Z,1520703643.539 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:40:43.942Z,1520703643.942 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:40:44.360Z,1520703644.360 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:40:44.761Z,1520703644.761 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:40:45.148Z,1520703645.148 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:40:45.166Z,1520703645.166 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T17:40:45.167Z,1520703645.167 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 1
2018-03-10T17:40:45.167Z,1520703645.167 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-10T17:40:45.179Z,1520703645.179 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-10T17:40:45.550Z,1520703645.550 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:40:45.612Z,1520703645.612 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-10T17:40:45.612Z,1520703645.612 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 1
2018-03-10T17:40:45.949Z,1520703645.949 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:40:45.967Z,1520703645.967 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-10T17:40:45.968Z,1520703645.968 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-10T17:40:45.968Z,1520703645.968 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-10T17:40:46.334Z,1520703646.334 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:40:46.728Z,1520703646.728 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:40:47.133Z,1520703647.133 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:40:47.533Z,1520703647.533 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:40:47.932Z,1520703647.932 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:40:48.326Z,1520703648.326 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:40:48.734Z,1520703648.734 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:40:49.135Z,1520703649.135 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:40:49.550Z,1520703649.550 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:40:49.968Z,1520703649.968 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:40:50.350Z,1520703650.350 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:40:50.746Z,1520703650.746 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:40:51.154Z,1520703651.154 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:40:51.517Z,1520703651.517 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:40:51.951Z,1520703651.951 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:40:52.321Z,1520703652.321 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:40:52.730Z,1520703652.730 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:40:53.151Z,1520703653.151 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:40:53.542Z,1520703653.542 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:40:53.942Z,1520703653.942 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:40:54.327Z,1520703654.327 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:40:54.729Z,1520703654.729 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:40:55.125Z,1520703655.125 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:40:55.524Z,1520703655.524 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:40:55.928Z,1520703655.928 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:40:56.326Z,1520703656.326 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:40:56.722Z,1520703656.722 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:40:57.165Z,1520703657.165 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:40:57.536Z,1520703657.536 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:40:57.937Z,1520703657.937 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:40:58.340Z,1520703658.340 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:40:58.760Z,1520703658.760 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:40:59.164Z,1520703659.164 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:40:59.537Z,1520703659.537 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:40:59.952Z,1520703659.952 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:41:00.330Z,1520703660.330 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:41:00.734Z,1520703660.734 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:41:01.124Z,1520703661.124 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:41:01.533Z,1520703661.533 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:41:01.934Z,1520703661.934 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:41:02.325Z,1520703662.325 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:41:02.728Z,1520703662.728 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:41:03.127Z,1520703663.127 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:41:03.528Z,1520703663.528 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:41:03.958Z,1520703663.958 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:41:04.335Z,1520703664.335 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:41:04.743Z,1520703664.743 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:41:05.146Z,1520703665.146 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:41:05.557Z,1520703665.557 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:41:05.960Z,1520703665.960 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:41:06.340Z,1520703666.340 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:41:06.752Z,1520703666.752 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:41:07.125Z,1520703667.125 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:41:07.536Z,1520703667.536 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:41:07.924Z,1520703667.924 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:41:08.338Z,1520703668.338 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:41:08.733Z,1520703668.733 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:41:09.124Z,1520703669.124 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:41:09.523Z,1520703669.523 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:41:09.923Z,1520703669.923 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:41:10.323Z,1520703670.323 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:41:10.769Z,1520703670.769 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:41:11.153Z,1520703671.153 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:41:11.536Z,1520703671.536 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:41:11.947Z,1520703671.947 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:41:12.363Z,1520703672.363 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:41:12.753Z,1520703672.753 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:41:13.132Z,1520703673.132 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:41:13.538Z,1520703673.538 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:41:13.959Z,1520703673.959 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:41:14.335Z,1520703674.335 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:41:14.730Z,1520703674.730 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:41:15.128Z,1520703675.128 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:41:15.532Z,1520703675.532 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:41:15.934Z,1520703675.934 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:41:16.336Z,1520703676.336 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:41:16.731Z,1520703676.731 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:41:17.129Z,1520703677.129 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:41:17.522Z,1520703677.522 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:41:17.956Z,1520703677.956 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:41:18.346Z,1520703678.346 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:41:18.732Z,1520703678.732 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:41:19.144Z,1520703679.144 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:41:19.550Z,1520703679.550 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:41:19.926Z,1520703679.926 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:41:20.354Z,1520703680.354 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:41:20.728Z,1520703680.728 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:41:21.138Z,1520703681.138 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:41:21.553Z,1520703681.553 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:41:21.935Z,1520703681.935 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:41:22.334Z,1520703682.334 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:41:22.724Z,1520703682.724 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:41:23.134Z,1520703683.134 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:41:23.534Z,1520703683.534 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:41:23.931Z,1520703683.931 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:41:24.335Z,1520703684.335 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:41:24.735Z,1520703684.735 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:41:25.118Z,1520703685.118 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:41:25.542Z,1520703685.542 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:41:25.924Z,1520703685.924 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:41:26.328Z,1520703686.328 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:41:26.750Z,1520703686.750 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:41:27.154Z,1520703687.154 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:41:27.525Z,1520703687.525 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:41:27.961Z,1520703687.961 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:41:28.338Z,1520703688.338 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:41:31.497Z,1520703691.497 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:41:31.615Z,1520703691.615 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:41:31.980Z,1520703691.980 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:41:32.376Z,1520703692.376 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:41:32.774Z,1520703692.774 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:41:33.173Z,1520703693.173 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:41:33.573Z,1520703693.573 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:41:33.972Z,1520703693.972 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:41:34.374Z,1520703694.374 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:41:34.777Z,1520703694.777 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:41:35.176Z,1520703695.176 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:41:35.565Z,1520703695.565 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:41:35.960Z,1520703695.960 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:41:36.360Z,1520703696.360 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:41:36.768Z,1520703696.768 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:41:37.160Z,1520703697.160 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:41:37.565Z,1520703697.565 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:41:37.965Z,1520703697.965 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:41:38.368Z,1520703698.368 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:41:38.768Z,1520703698.768 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:41:39.170Z,1520703699.170 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:41:39.590Z,1520703699.590 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:41:39.976Z,1520703699.976 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:41:40.374Z,1520703700.374 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:41:40.770Z,1520703700.770 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:41:41.175Z,1520703701.175 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:41:41.572Z,1520703701.572 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:41:41.972Z,1520703701.972 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:41:42.374Z,1520703702.374 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:41:42.772Z,1520703702.772 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:41:43.173Z,1520703703.173 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:41:43.573Z,1520703703.573 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:41:43.973Z,1520703703.973 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:41:44.368Z,1520703704.368 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:41:44.776Z,1520703704.776 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:41:45.169Z,1520703705.169 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:41:45.576Z,1520703705.576 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:41:45.961Z,1520703705.961 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:41:46.364Z,1520703706.364 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:41:46.790Z,1520703706.790 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:41:47.178Z,1520703707.178 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:41:47.577Z,1520703707.577 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:41:47.973Z,1520703707.973 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:41:48.364Z,1520703708.364 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:41:48.765Z,1520703708.765 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:41:49.190Z,1520703709.190 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:41:49.568Z,1520703709.568 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:41:49.964Z,1520703709.964 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:41:50.366Z,1520703710.366 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:41:50.766Z,1520703710.766 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:41:51.179Z,1520703711.179 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:41:51.571Z,1520703711.571 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:41:51.975Z,1520703711.975 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:41:52.369Z,1520703712.369 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:41:52.768Z,1520703712.768 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:41:53.161Z,1520703713.161 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:41:53.565Z,1520703713.565 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:41:53.973Z,1520703713.973 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:41:54.370Z,1520703714.370 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:41:54.769Z,1520703714.769 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:41:55.166Z,1520703715.166 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:41:55.573Z,1520703715.573 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:41:55.971Z,1520703715.971 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:41:56.373Z,1520703716.373 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:41:56.774Z,1520703716.774 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:41:57.182Z,1520703717.182 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:41:57.568Z,1520703717.568 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:41:57.977Z,1520703717.977 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:41:58.368Z,1520703718.368 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:41:58.778Z,1520703718.778 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:41:59.162Z,1520703719.162 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:41:59.568Z,1520703719.568 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:41:59.977Z,1520703719.977 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:42:00.385Z,1520703720.385 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:42:00.765Z,1520703720.765 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:42:01.164Z,1520703721.164 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:42:01.561Z,1520703721.561 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:42:01.961Z,1520703721.961 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:42:02.369Z,1520703722.369 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:42:02.761Z,1520703722.761 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:42:03.169Z,1520703723.169 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:42:03.573Z,1520703723.573 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:42:03.969Z,1520703723.969 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:42:04.364Z,1520703724.364 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:42:04.772Z,1520703724.772 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:42:05.173Z,1520703725.173 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:42:05.570Z,1520703725.570 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:42:05.968Z,1520703725.968 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:42:06.370Z,1520703726.370 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:42:06.772Z,1520703726.772 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:42:07.191Z,1520703727.191 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:42:07.199Z,1520703727.199 [BPC1](ERROR): Failed to receive battery data
2018-03-10T17:42:07.200Z,1520703727.200 [BPC1] Communications Fault, FailCount= 1
2018-03-10T17:42:07.200Z,1520703727.200 [BPC1](ERROR): Communications Fault
2018-03-10T17:42:07.287Z,1520703727.287 [CBIT](ERROR): Communications Fault in component: BPC1
2018-03-10T17:42:07.575Z,1520703727.575 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:42:07.976Z,1520703727.976 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:42:08.373Z,1520703728.373 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:42:08.403Z,1520703728.403 [CBIT](INFO): Clearing failed state for component BPC1
2018-03-10T17:42:08.403Z,1520703728.403 [BPC1] No Fault, FailCount= 1
2018-03-10T17:42:08.777Z,1520703728.777 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:42:09.184Z,1520703729.184 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:42:09.560Z,1520703729.560 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:42:09.964Z,1520703729.964 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:42:10.365Z,1520703730.365 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:42:10.760Z,1520703730.760 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:42:11.160Z,1520703731.160 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:42:11.560Z,1520703731.560 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:42:11.960Z,1520703731.960 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:42:12.358Z,1520703732.358 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:42:12.764Z,1520703732.764 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:42:13.168Z,1520703733.168 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:42:13.569Z,1520703733.569 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:42:13.972Z,1520703733.972 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:42:14.368Z,1520703734.368 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:42:14.765Z,1520703734.765 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:42:15.165Z,1520703735.165 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:42:15.568Z,1520703735.568 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:42:15.968Z,1520703735.968 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:42:16.364Z,1520703736.364 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:42:16.768Z,1520703736.768 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:42:17.162Z,1520703737.162 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:42:17.564Z,1520703737.564 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:42:17.968Z,1520703737.968 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:42:18.358Z,1520703738.358 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:42:18.764Z,1520703738.764 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:42:19.162Z,1520703739.162 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:42:19.561Z,1520703739.561 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:42:19.976Z,1520703739.976 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:42:20.372Z,1520703740.372 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:42:20.776Z,1520703740.776 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:42:21.181Z,1520703741.181 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:42:21.574Z,1520703741.574 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:42:21.968Z,1520703741.968 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:42:22.365Z,1520703742.365 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:42:22.781Z,1520703742.781 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:42:23.169Z,1520703743.169 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:42:23.572Z,1520703743.572 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:42:23.972Z,1520703743.972 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:42:24.368Z,1520703744.368 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:42:24.771Z,1520703744.771 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:42:25.168Z,1520703745.168 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:42:25.570Z,1520703745.570 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:42:25.972Z,1520703745.972 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:42:26.376Z,1520703746.376 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:42:26.776Z,1520703746.776 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:42:27.176Z,1520703747.176 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:42:27.572Z,1520703747.572 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:42:27.964Z,1520703747.964 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:42:28.360Z,1520703748.360 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:42:31.562Z,1520703751.562 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:42:31.691Z,1520703751.691 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:42:32.052Z,1520703752.052 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:42:32.445Z,1520703752.445 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:42:32.855Z,1520703752.855 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:42:33.244Z,1520703753.244 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:42:33.645Z,1520703753.645 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:42:34.044Z,1520703754.044 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:42:34.444Z,1520703754.444 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:42:34.844Z,1520703754.844 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:42:35.242Z,1520703755.242 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:42:35.644Z,1520703755.644 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:42:36.048Z,1520703756.048 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:42:36.441Z,1520703756.441 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:42:36.839Z,1520703756.839 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:42:37.248Z,1520703757.248 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:42:37.645Z,1520703757.645 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:42:38.044Z,1520703758.044 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:42:38.444Z,1520703758.444 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:42:38.844Z,1520703758.844 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:42:38.860Z,1520703758.860 [BPC1](FAULT): Failed to initialize
2018-03-10T17:42:38.860Z,1520703758.860 [BPC1] Communications Fault, FailCount= 2
2018-03-10T17:42:38.860Z,1520703758.860 [BPC1](ERROR): Communications Fault
2018-03-10T17:42:38.908Z,1520703758.908 [CBIT](ERROR): Communications Fault in component: BPC1
2018-03-10T17:42:39.244Z,1520703759.244 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:42:39.648Z,1520703759.648 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:42:40.046Z,1520703760.046 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:42:40.076Z,1520703760.076 [CBIT](INFO): Clearing failed state for component BPC1
2018-03-10T17:42:40.076Z,1520703760.076 [BPC1] No Fault, FailCount= 2
2018-03-10T17:42:40.436Z,1520703760.436 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:42:40.853Z,1520703760.853 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:42:41.248Z,1520703761.248 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:42:41.657Z,1520703761.657 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:42:42.037Z,1520703762.037 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:42:42.449Z,1520703762.449 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:42:42.854Z,1520703762.854 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:42:43.248Z,1520703763.248 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:42:43.637Z,1520703763.637 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:42:44.054Z,1520703764.054 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:42:44.435Z,1520703764.435 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:42:44.840Z,1520703764.840 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:42:45.237Z,1520703765.237 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:42:45.634Z,1520703765.634 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:42:46.037Z,1520703766.037 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:42:46.441Z,1520703766.441 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:42:46.837Z,1520703766.837 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:42:47.242Z,1520703767.242 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:42:47.641Z,1520703767.641 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:42:48.045Z,1520703768.045 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:42:48.443Z,1520703768.443 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:42:48.844Z,1520703768.844 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:42:49.242Z,1520703769.242 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:42:49.643Z,1520703769.643 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:42:50.044Z,1520703770.044 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:42:50.441Z,1520703770.441 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:42:50.843Z,1520703770.843 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:42:51.246Z,1520703771.246 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:42:51.641Z,1520703771.641 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:42:52.044Z,1520703772.044 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:42:52.443Z,1520703772.443 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:42:52.845Z,1520703772.845 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:42:53.244Z,1520703773.244 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:42:53.644Z,1520703773.644 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:42:54.042Z,1520703774.042 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:42:54.445Z,1520703774.445 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:42:54.844Z,1520703774.844 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:42:55.237Z,1520703775.237 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:42:55.644Z,1520703775.644 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:42:56.042Z,1520703776.042 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:42:56.441Z,1520703776.441 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:42:56.848Z,1520703776.848 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:42:57.247Z,1520703777.247 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:42:57.647Z,1520703777.647 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:42:58.044Z,1520703778.044 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:42:58.448Z,1520703778.448 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:42:58.848Z,1520703778.848 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:42:59.247Z,1520703779.247 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:42:59.653Z,1520703779.653 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:43:00.044Z,1520703780.044 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:43:00.432Z,1520703780.432 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:43:00.849Z,1520703780.849 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:43:01.234Z,1520703781.234 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:43:01.636Z,1520703781.636 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:43:02.041Z,1520703782.041 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:43:02.431Z,1520703782.431 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:43:02.841Z,1520703782.841 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:43:03.241Z,1520703783.241 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:43:03.640Z,1520703783.640 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:43:04.043Z,1520703784.043 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:43:04.440Z,1520703784.440 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:43:04.845Z,1520703784.845 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:43:05.245Z,1520703785.245 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:43:05.644Z,1520703785.644 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:43:06.044Z,1520703786.044 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:43:06.451Z,1520703786.451 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:43:06.844Z,1520703786.844 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:43:07.244Z,1520703787.244 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:43:07.645Z,1520703787.645 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:43:08.048Z,1520703788.048 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:43:08.442Z,1520703788.442 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:43:08.842Z,1520703788.842 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:43:09.248Z,1520703789.248 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:43:09.641Z,1520703789.641 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:43:10.044Z,1520703790.044 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:43:10.452Z,1520703790.452 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:43:10.848Z,1520703790.848 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:43:10.856Z,1520703790.856 [BPC1](FAULT): Failed to initialize
2018-03-10T17:43:10.856Z,1520703790.856 [BPC1] Communications Fault, FailCount= 3
2018-03-10T17:43:10.857Z,1520703790.857 [BPC1](ERROR): Communications Fault
2018-03-10T17:43:10.878Z,1520703790.878 [CBIT](ERROR): Communications Fault in component: BPC1
2018-03-10T17:43:11.240Z,1520703791.240 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:43:11.640Z,1520703791.640 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:43:12.048Z,1520703792.048 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:43:12.077Z,1520703792.077 [CBIT](INFO): Clearing failed state for component BPC1
2018-03-10T17:43:12.077Z,1520703792.077 [BPC1] No Fault, FailCount= 3
2018-03-10T17:43:12.437Z,1520703792.437 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:43:12.836Z,1520703792.836 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:43:13.233Z,1520703793.233 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:43:13.636Z,1520703793.636 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:43:14.036Z,1520703794.036 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:43:14.448Z,1520703794.448 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:43:14.836Z,1520703794.836 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:43:15.244Z,1520703795.244 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:43:15.633Z,1520703795.633 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:43:16.040Z,1520703796.040 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:43:16.436Z,1520703796.436 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:43:16.840Z,1520703796.840 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:43:17.241Z,1520703797.241 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:43:17.644Z,1520703797.644 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:43:18.036Z,1520703798.036 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:43:18.444Z,1520703798.444 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:43:18.836Z,1520703798.836 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:43:19.242Z,1520703799.242 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:43:19.641Z,1520703799.641 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:43:20.046Z,1520703800.046 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:43:20.447Z,1520703800.447 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:43:20.844Z,1520703800.844 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:43:21.242Z,1520703801.242 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:43:21.649Z,1520703801.649 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:43:22.050Z,1520703802.050 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:43:22.449Z,1520703802.449 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:43:22.846Z,1520703802.846 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:43:23.242Z,1520703803.242 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:43:23.653Z,1520703803.653 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:43:24.044Z,1520703804.044 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:43:24.438Z,1520703804.438 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:43:24.845Z,1520703804.845 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:43:25.246Z,1520703805.246 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:43:25.641Z,1520703805.641 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:43:26.038Z,1520703806.038 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:43:26.446Z,1520703806.446 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:43:26.846Z,1520703806.846 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:43:27.240Z,1520703807.240 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:43:27.649Z,1520703807.649 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:43:28.048Z,1520703808.048 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:43:28.440Z,1520703808.440 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:43:31.633Z,1520703811.633 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:43:31.757Z,1520703811.757 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:43:32.122Z,1520703812.122 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:43:32.512Z,1520703812.512 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:43:32.913Z,1520703812.913 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:43:33.322Z,1520703813.322 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:43:33.707Z,1520703813.707 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:43:34.109Z,1520703814.109 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:43:34.508Z,1520703814.508 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:43:34.909Z,1520703814.909 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:43:35.309Z,1520703815.309 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:43:35.721Z,1520703815.721 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:43:36.100Z,1520703816.100 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:43:36.498Z,1520703816.498 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:43:36.905Z,1520703816.905 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:43:37.300Z,1520703817.300 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:43:37.700Z,1520703817.700 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:43:38.116Z,1520703818.116 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:43:38.504Z,1520703818.504 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:43:38.902Z,1520703818.902 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:43:39.317Z,1520703819.317 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:43:39.709Z,1520703819.709 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:43:40.112Z,1520703820.112 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:43:40.513Z,1520703820.513 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:43:40.911Z,1520703820.911 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:43:41.308Z,1520703821.308 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:43:41.713Z,1520703821.713 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:43:42.108Z,1520703822.108 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:43:42.508Z,1520703822.508 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:43:42.516Z,1520703822.516 [BPC1](FAULT): Failed to initialize
2018-03-10T17:43:42.516Z,1520703822.516 [BPC1] Communications Fault, FailCount= 4
2018-03-10T17:43:42.516Z,1520703822.516 [BPC1](ERROR): Communications Fault
2018-03-10T17:43:42.539Z,1520703822.539 [CBIT](ERROR): Communications Fault in component: BPC1
2018-03-10T17:43:42.908Z,1520703822.908 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:43:43.316Z,1520703823.316 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:43:43.698Z,1520703823.698 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:43:43.760Z,1520703823.760 [CBIT](INFO): Clearing failed state for component BPC1
2018-03-10T17:43:43.760Z,1520703823.760 [BPC1] No Fault, FailCount= 4
2018-03-10T17:43:44.104Z,1520703824.104 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:43:44.504Z,1520703824.504 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:43:44.900Z,1520703824.900 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:43:45.324Z,1520703825.324 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:43:45.700Z,1520703825.700 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:43:46.100Z,1520703826.100 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:43:46.129Z,1520703826.129 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T17:43:46.129Z,1520703826.129 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 2
2018-03-10T17:43:46.129Z,1520703826.129 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-10T17:43:46.142Z,1520703826.142 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-10T17:43:46.525Z,1520703826.525 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:43:46.559Z,1520703826.559 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-10T17:43:46.559Z,1520703826.559 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 2
2018-03-10T17:43:46.904Z,1520703826.904 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:43:46.937Z,1520703826.937 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-10T17:43:46.938Z,1520703826.938 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-10T17:43:46.938Z,1520703826.938 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-10T17:43:47.304Z,1520703827.304 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:43:47.704Z,1520703827.704 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:43:48.108Z,1520703828.108 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:43:48.499Z,1520703828.499 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:43:48.909Z,1520703828.909 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:43:49.304Z,1520703829.304 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:43:49.705Z,1520703829.705 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:43:50.114Z,1520703830.114 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:43:50.508Z,1520703830.508 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:43:50.912Z,1520703830.912 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:43:51.320Z,1520703831.320 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:43:51.712Z,1520703831.712 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:43:52.106Z,1520703832.106 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:43:52.512Z,1520703832.512 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:43:52.908Z,1520703832.908 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:43:53.304Z,1520703833.304 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:43:53.712Z,1520703833.712 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:43:54.108Z,1520703834.108 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:43:54.509Z,1520703834.509 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:43:54.912Z,1520703834.912 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:43:55.308Z,1520703835.308 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:43:55.708Z,1520703835.708 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:43:56.117Z,1520703836.117 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:43:56.508Z,1520703836.508 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:43:56.912Z,1520703836.912 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:43:57.321Z,1520703837.321 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:43:57.707Z,1520703837.707 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:43:58.109Z,1520703838.109 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:43:58.521Z,1520703838.521 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:43:58.900Z,1520703838.900 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:43:59.312Z,1520703839.312 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:43:59.721Z,1520703839.721 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:44:00.100Z,1520703840.100 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:44:00.500Z,1520703840.500 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:44:00.908Z,1520703840.908 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:44:01.300Z,1520703841.300 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:44:01.702Z,1520703841.702 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:44:02.104Z,1520703842.104 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:44:02.500Z,1520703842.500 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:44:02.901Z,1520703842.901 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:44:03.312Z,1520703843.312 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:44:03.705Z,1520703843.705 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:44:04.111Z,1520703844.111 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:44:04.513Z,1520703844.513 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:44:04.911Z,1520703844.911 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:44:05.310Z,1520703845.310 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:44:05.709Z,1520703845.709 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:44:06.116Z,1520703846.116 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:44:06.509Z,1520703846.509 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:44:06.912Z,1520703846.912 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:44:07.308Z,1520703847.308 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:44:07.713Z,1520703847.713 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:44:08.117Z,1520703848.117 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:44:08.508Z,1520703848.508 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:44:08.916Z,1520703848.916 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:44:09.309Z,1520703849.309 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:44:09.712Z,1520703849.712 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:44:10.113Z,1520703850.113 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:44:10.511Z,1520703850.511 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:44:10.916Z,1520703850.916 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:44:11.313Z,1520703851.313 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:44:11.711Z,1520703851.711 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:44:12.112Z,1520703852.112 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:44:12.516Z,1520703852.516 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:44:12.907Z,1520703852.907 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:44:13.299Z,1520703853.299 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:44:13.700Z,1520703853.700 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:44:14.104Z,1520703854.104 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:44:14.501Z,1520703854.501 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:44:14.900Z,1520703854.900 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:44:15.304Z,1520703855.304 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:44:15.700Z,1520703855.700 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:44:16.100Z,1520703856.100 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:44:16.504Z,1520703856.504 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:44:16.900Z,1520703856.900 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:44:17.302Z,1520703857.302 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:44:17.724Z,1520703857.724 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:44:18.104Z,1520703858.104 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:44:18.502Z,1520703858.502 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:44:18.904Z,1520703858.904 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:44:19.317Z,1520703859.317 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:44:19.698Z,1520703859.698 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:44:20.100Z,1520703860.100 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:44:20.508Z,1520703860.508 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:44:20.904Z,1520703860.904 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:44:21.304Z,1520703861.304 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:44:21.708Z,1520703861.708 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:44:22.104Z,1520703862.104 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:44:22.504Z,1520703862.504 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:44:22.904Z,1520703862.904 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:44:23.304Z,1520703863.304 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:44:23.704Z,1520703863.704 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:44:24.125Z,1520703864.125 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:44:24.503Z,1520703864.503 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:44:24.904Z,1520703864.904 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:44:25.304Z,1520703865.304 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:44:25.709Z,1520703865.709 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:44:26.112Z,1520703866.112 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:44:26.517Z,1520703866.517 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:44:26.916Z,1520703866.916 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:44:27.312Z,1520703867.312 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:44:27.716Z,1520703867.716 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:44:27.736Z,1520703867.736 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-03-10T17:44:27.736Z,1520703867.736 [Default:CheckIn:C.Wait] Stopped
2018-03-10T17:44:27.736Z,1520703867.736 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-03-10T17:44:27.736Z,1520703867.736 [Default:CheckIn:D] Running Loop=1
2018-03-10T17:44:28.100Z,1520703868.100 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:44:28.139Z,1520703868.139 [Default:CheckIn:D] Stopped
2018-03-10T17:44:28.139Z,1520703868.139 [Default:CheckIn:E] Running Loop=1
2018-03-10T17:44:28.500Z,1520703868.500 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:44:28.538Z,1520703868.538 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 745.170313 min 
2018-03-10T17:44:28.539Z,1520703868.539 [Default:CheckIn:E] Stopped
2018-03-10T17:44:28.539Z,1520703868.539 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-03-10T17:44:28.539Z,1520703868.539 [Default:CheckIn] Stopped
2018-03-10T17:44:28.539Z,1520703868.539 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-03-10T17:44:28.539Z,1520703868.539 [Default:CheckIn](INFO): Running loop #74
2018-03-10T17:44:28.539Z,1520703868.539 [Default:CheckIn] Running Loop=74
2018-03-10T17:44:28.539Z,1520703868.539 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-03-10T17:44:28.539Z,1520703868.539 [Default:CheckIn:Read_GPS] Running Loop=1
2018-03-10T17:44:31.822Z,1520703871.822 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:44:31.928Z,1520703871.928 [NAL9602](INFO): Powering up
2018-03-10T17:44:31.944Z,1520703871.944 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:44:32.349Z,1520703872.349 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:44:32.735Z,1520703872.735 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:44:33.142Z,1520703873.142 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:44:33.548Z,1520703873.548 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:44:33.946Z,1520703873.946 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:44:34.340Z,1520703874.340 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:44:34.745Z,1520703874.745 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:44:35.141Z,1520703875.141 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:44:35.595Z,1520703875.595 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:44:35.959Z,1520703875.959 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:44:36.344Z,1520703876.344 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:44:36.754Z,1520703876.754 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:44:37.166Z,1520703877.166 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:44:37.560Z,1520703877.560 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:44:37.957Z,1520703877.957 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:44:38.362Z,1520703878.362 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:44:38.740Z,1520703878.740 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:44:39.136Z,1520703879.136 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:44:39.536Z,1520703879.536 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:44:39.944Z,1520703879.944 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:44:40.344Z,1520703880.344 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:44:40.733Z,1520703880.733 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:44:41.136Z,1520703881.136 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:44:41.535Z,1520703881.535 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:44:41.937Z,1520703881.937 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:44:42.381Z,1520703882.381 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:44:42.756Z,1520703882.756 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:44:43.125Z,1520703883.125 [NAL9602](INFO): NAL9602 initialized
2018-03-10T17:44:43.142Z,1520703883.142 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:44:43.557Z,1520703883.557 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:44:43.983Z,1520703883.983 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:44:44.385Z,1520703884.385 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:44:44.768Z,1520703884.768 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:44:45.153Z,1520703885.153 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:44:45.550Z,1520703885.550 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:44:45.953Z,1520703885.953 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:44:46.356Z,1520703886.356 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:44:46.755Z,1520703886.755 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:44:47.159Z,1520703887.159 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:44:47.545Z,1520703887.545 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:44:47.946Z,1520703887.946 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:44:48.350Z,1520703888.350 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:44:48.732Z,1520703888.732 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:44:49.173Z,1520703889.173 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:44:49.554Z,1520703889.554 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:44:49.944Z,1520703889.944 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:44:50.352Z,1520703890.352 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:44:50.781Z,1520703890.781 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:44:51.172Z,1520703891.172 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:44:51.549Z,1520703891.549 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:44:51.961Z,1520703891.961 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:44:52.344Z,1520703892.344 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:44:52.744Z,1520703892.744 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:44:53.143Z,1520703893.143 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:44:53.544Z,1520703893.544 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:44:53.946Z,1520703893.946 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:44:54.338Z,1520703894.338 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:44:54.736Z,1520703894.736 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:44:55.148Z,1520703895.148 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:44:55.551Z,1520703895.551 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:44:55.977Z,1520703895.977 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:44:56.353Z,1520703896.353 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:44:56.754Z,1520703896.754 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:44:57.153Z,1520703897.153 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:44:57.565Z,1520703897.565 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:44:57.961Z,1520703897.961 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:44:58.336Z,1520703898.336 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:44:58.758Z,1520703898.758 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:44:59.162Z,1520703899.162 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:44:59.554Z,1520703899.554 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:44:59.945Z,1520703899.945 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:45:00.338Z,1520703900.338 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:45:00.740Z,1520703900.740 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:45:01.148Z,1520703901.148 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:45:01.545Z,1520703901.545 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:45:01.946Z,1520703901.946 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:45:02.343Z,1520703902.343 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:45:02.745Z,1520703902.745 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:45:03.191Z,1520703903.191 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:45:03.571Z,1520703903.571 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:45:03.960Z,1520703903.960 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:45:04.359Z,1520703904.359 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:45:04.769Z,1520703904.769 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:45:05.154Z,1520703905.154 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:45:05.554Z,1520703905.554 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:45:05.932Z,1520703905.932 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:45:06.354Z,1520703906.354 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:45:06.754Z,1520703906.754 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:45:07.136Z,1520703907.136 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:45:07.554Z,1520703907.554 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:45:07.964Z,1520703907.964 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:45:08.356Z,1520703908.356 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:45:08.736Z,1520703908.736 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:45:09.141Z,1520703909.141 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:45:09.540Z,1520703909.540 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:45:09.975Z,1520703909.975 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:45:10.370Z,1520703910.370 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:45:10.738Z,1520703910.738 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:45:11.146Z,1520703911.146 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:45:11.567Z,1520703911.567 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:45:11.948Z,1520703911.948 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:45:12.348Z,1520703912.348 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:45:12.746Z,1520703912.746 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:45:13.163Z,1520703913.163 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:45:13.548Z,1520703913.548 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:45:13.941Z,1520703913.941 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:45:14.334Z,1520703914.334 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:45:14.744Z,1520703914.744 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:45:15.146Z,1520703915.146 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:45:15.544Z,1520703915.544 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:45:15.940Z,1520703915.940 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:45:16.332Z,1520703916.332 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:45:16.751Z,1520703916.751 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:45:17.167Z,1520703917.167 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:45:17.557Z,1520703917.557 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:45:17.948Z,1520703917.948 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:45:18.349Z,1520703918.349 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:45:18.761Z,1520703918.761 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:45:19.157Z,1520703919.157 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:45:19.538Z,1520703919.538 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:45:19.949Z,1520703919.949 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:45:20.360Z,1520703920.360 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:45:20.758Z,1520703920.758 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:45:21.159Z,1520703921.159 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:45:21.542Z,1520703921.542 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:45:21.941Z,1520703921.941 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:45:22.350Z,1520703922.350 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:45:22.745Z,1520703922.745 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:45:23.135Z,1520703923.135 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:45:23.545Z,1520703923.545 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:45:23.945Z,1520703923.945 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:45:24.366Z,1520703924.366 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:45:24.750Z,1520703924.750 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:45:25.150Z,1520703925.150 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:45:25.556Z,1520703925.556 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:45:25.965Z,1520703925.965 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:45:26.368Z,1520703926.368 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:45:26.737Z,1520703926.737 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:45:27.163Z,1520703927.163 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:45:27.543Z,1520703927.543 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:45:27.941Z,1520703927.941 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:45:28.338Z,1520703928.338 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:45:28.744Z,1520703928.744 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:45:32.007Z,1520703932.007 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:45:32.152Z,1520703932.152 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:45:32.506Z,1520703932.506 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:45:32.902Z,1520703932.902 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:45:33.307Z,1520703933.307 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:45:33.719Z,1520703933.719 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:45:34.123Z,1520703934.123 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:45:34.505Z,1520703934.505 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:45:34.904Z,1520703934.904 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:45:35.305Z,1520703935.305 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:45:35.704Z,1520703935.704 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:45:36.105Z,1520703936.105 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:45:36.505Z,1520703936.505 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:45:36.909Z,1520703936.909 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:45:37.304Z,1520703937.304 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:45:37.705Z,1520703937.705 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:45:38.114Z,1520703938.114 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:45:38.514Z,1520703938.514 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:45:38.906Z,1520703938.906 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:45:39.303Z,1520703939.303 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:45:39.703Z,1520703939.703 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:45:40.105Z,1520703940.105 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:45:40.503Z,1520703940.503 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:45:40.899Z,1520703940.899 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:45:41.317Z,1520703941.317 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:45:41.707Z,1520703941.707 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:45:42.107Z,1520703942.107 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:45:42.507Z,1520703942.507 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:45:42.897Z,1520703942.897 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:45:43.296Z,1520703943.296 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:45:43.705Z,1520703943.705 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:45:43.747Z,1520703943.747 [CBIT](DEBUG): EFC running - data check-sum false
2018-03-10T17:45:44.097Z,1520703944.097 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:45:44.522Z,1520703944.522 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:45:44.904Z,1520703944.904 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:45:45.305Z,1520703945.305 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:45:45.702Z,1520703945.702 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:45:46.101Z,1520703946.101 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:45:46.515Z,1520703946.515 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:45:46.915Z,1520703946.915 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:45:47.305Z,1520703947.305 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:45:47.705Z,1520703947.705 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:45:48.103Z,1520703948.103 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:45:48.506Z,1520703948.506 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:45:48.905Z,1520703948.905 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:45:49.304Z,1520703949.304 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:45:49.705Z,1520703949.705 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:45:50.114Z,1520703950.114 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:45:50.515Z,1520703950.515 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:45:50.919Z,1520703950.919 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:45:51.313Z,1520703951.313 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:45:51.712Z,1520703951.712 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:45:52.096Z,1520703952.096 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:45:52.497Z,1520703952.497 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:45:52.896Z,1520703952.896 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:45:53.319Z,1520703953.319 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:45:53.697Z,1520703953.697 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:45:54.113Z,1520703954.113 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:45:54.497Z,1520703954.497 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:45:54.914Z,1520703954.914 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:45:55.312Z,1520703955.312 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:45:55.718Z,1520703955.718 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:45:56.121Z,1520703956.121 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:45:56.513Z,1520703956.513 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:45:56.901Z,1520703956.901 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:45:57.296Z,1520703957.296 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:45:57.696Z,1520703957.696 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:45:58.104Z,1520703958.104 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:45:58.501Z,1520703958.501 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:45:58.902Z,1520703958.902 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:45:59.304Z,1520703959.304 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:45:59.697Z,1520703959.697 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:46:00.115Z,1520703960.115 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:46:00.510Z,1520703960.510 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:46:00.907Z,1520703960.907 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:46:01.311Z,1520703961.311 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:46:01.705Z,1520703961.705 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:46:02.100Z,1520703962.100 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:46:02.508Z,1520703962.508 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:46:02.910Z,1520703962.910 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:46:03.309Z,1520703963.309 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:46:03.697Z,1520703963.697 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:46:04.117Z,1520703964.117 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:46:04.497Z,1520703964.497 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:46:04.897Z,1520703964.897 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:46:05.320Z,1520703965.320 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:46:05.715Z,1520703965.715 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:46:06.096Z,1520703966.096 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:46:06.497Z,1520703966.497 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:46:06.918Z,1520703966.918 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:46:07.316Z,1520703967.316 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:46:07.711Z,1520703967.711 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:46:08.107Z,1520703968.107 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:46:08.496Z,1520703968.496 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:46:08.897Z,1520703968.897 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:46:09.297Z,1520703969.297 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:46:09.701Z,1520703969.701 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:46:10.096Z,1520703970.096 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:46:10.497Z,1520703970.497 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:46:10.901Z,1520703970.901 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:46:11.309Z,1520703971.309 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:46:11.716Z,1520703971.716 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:46:12.119Z,1520703972.119 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:46:12.519Z,1520703972.519 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:46:12.915Z,1520703972.915 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:46:13.304Z,1520703973.304 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:46:13.706Z,1520703973.706 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:46:14.106Z,1520703974.106 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:46:14.505Z,1520703974.505 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:46:14.905Z,1520703974.905 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:46:15.309Z,1520703975.309 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:46:15.704Z,1520703975.704 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:46:16.105Z,1520703976.105 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:46:16.504Z,1520703976.504 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:46:16.914Z,1520703976.914 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:46:17.319Z,1520703977.319 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:46:17.697Z,1520703977.697 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:46:18.096Z,1520703978.096 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:46:18.497Z,1520703978.497 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:46:18.897Z,1520703978.897 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:46:19.297Z,1520703979.297 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:46:19.700Z,1520703979.700 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:46:20.097Z,1520703980.097 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:46:20.510Z,1520703980.510 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:46:20.919Z,1520703980.919 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:46:21.301Z,1520703981.301 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:46:21.696Z,1520703981.696 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:46:22.097Z,1520703982.097 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:46:22.497Z,1520703982.497 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:46:22.902Z,1520703982.902 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:46:23.302Z,1520703983.302 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:46:23.704Z,1520703983.704 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:46:24.103Z,1520703984.103 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:46:24.504Z,1520703984.504 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:46:24.901Z,1520703984.901 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:46:25.301Z,1520703985.301 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:46:25.702Z,1520703985.702 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:46:26.105Z,1520703986.105 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:46:26.504Z,1520703986.504 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:46:26.910Z,1520703986.910 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:46:27.305Z,1520703987.305 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:46:27.704Z,1520703987.704 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:46:28.101Z,1520703988.101 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:46:28.505Z,1520703988.505 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:46:28.913Z,1520703988.913 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:46:32.205Z,1520703992.205 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:46:32.330Z,1520703992.330 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:46:32.687Z,1520703992.687 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:46:33.082Z,1520703993.082 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:46:33.499Z,1520703993.499 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:46:33.886Z,1520703993.886 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:46:34.277Z,1520703994.277 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:46:34.673Z,1520703994.673 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:46:35.096Z,1520703995.096 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:46:35.477Z,1520703995.477 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:46:35.873Z,1520703995.873 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:46:36.302Z,1520703996.302 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:46:36.675Z,1520703996.675 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:46:37.086Z,1520703997.086 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:46:37.485Z,1520703997.485 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:46:37.895Z,1520703997.895 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:46:38.279Z,1520703998.279 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:46:38.704Z,1520703998.704 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:46:39.077Z,1520703999.077 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:46:39.474Z,1520703999.474 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:46:39.916Z,1520703999.916 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:46:40.281Z,1520704000.281 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:46:40.673Z,1520704000.673 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:46:41.095Z,1520704001.095 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:46:41.481Z,1520704001.481 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:46:41.883Z,1520704001.883 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:46:42.284Z,1520704002.284 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:46:42.688Z,1520704002.688 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:46:43.091Z,1520704003.091 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:46:43.499Z,1520704003.499 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:46:43.877Z,1520704003.877 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:46:44.276Z,1520704004.276 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:46:44.693Z,1520704004.693 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:46:45.073Z,1520704005.073 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:46:45.494Z,1520704005.494 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:46:45.877Z,1520704005.877 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:46:46.269Z,1520704006.269 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:46:46.689Z,1520704006.689 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:46:47.092Z,1520704007.092 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:46:47.122Z,1520704007.122 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T17:46:47.122Z,1520704007.122 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 3
2018-03-10T17:46:47.122Z,1520704007.122 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-10T17:46:47.135Z,1520704007.135 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-10T17:46:47.491Z,1520704007.491 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:46:47.574Z,1520704007.574 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-10T17:46:47.575Z,1520704007.575 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 3
2018-03-10T17:46:47.885Z,1520704007.885 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:46:47.943Z,1520704007.943 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-10T17:46:47.943Z,1520704007.943 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-10T17:46:47.944Z,1520704007.944 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-10T17:46:48.284Z,1520704008.284 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:46:48.696Z,1520704008.696 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:46:49.073Z,1520704009.073 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:46:49.494Z,1520704009.494 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:46:49.873Z,1520704009.873 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:46:50.275Z,1520704010.275 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:46:50.681Z,1520704010.681 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:46:51.079Z,1520704011.079 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:46:51.467Z,1520704011.467 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:46:51.874Z,1520704011.874 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:46:52.295Z,1520704012.295 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:46:52.692Z,1520704012.692 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:46:53.080Z,1520704013.080 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:46:53.496Z,1520704013.496 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:46:53.885Z,1520704013.885 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:46:54.299Z,1520704014.299 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:46:54.696Z,1520704014.696 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:46:55.076Z,1520704015.076 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:46:55.472Z,1520704015.472 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:46:55.873Z,1520704015.873 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:46:56.302Z,1520704016.302 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:46:56.674Z,1520704016.674 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:46:57.081Z,1520704017.081 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:46:57.473Z,1520704017.473 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:46:57.873Z,1520704017.873 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:46:58.277Z,1520704018.277 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:46:58.678Z,1520704018.678 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:46:59.072Z,1520704019.072 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:46:59.561Z,1520704019.561 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:46:59.873Z,1520704019.873 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:47:00.272Z,1520704020.272 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:47:00.677Z,1520704020.677 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:47:01.080Z,1520704021.080 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:47:01.474Z,1520704021.474 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:47:01.881Z,1520704021.881 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:47:02.274Z,1520704022.274 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:47:02.677Z,1520704022.677 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:47:03.091Z,1520704023.091 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:47:03.488Z,1520704023.488 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:47:03.877Z,1520704023.877 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:47:04.277Z,1520704024.277 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:47:04.681Z,1520704024.681 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:47:05.080Z,1520704025.080 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:47:05.481Z,1520704025.481 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:47:05.873Z,1520704025.873 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:47:06.280Z,1520704026.280 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:47:06.677Z,1520704026.677 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:47:07.077Z,1520704027.077 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:47:07.496Z,1520704027.496 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:47:07.891Z,1520704027.891 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:47:08.281Z,1520704028.281 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:47:08.678Z,1520704028.678 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:47:09.078Z,1520704029.078 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:47:09.478Z,1520704029.478 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:47:09.878Z,1520704029.878 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:47:10.280Z,1520704030.280 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:47:10.672Z,1520704030.672 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:47:11.080Z,1520704031.080 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:47:11.491Z,1520704031.491 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:47:11.895Z,1520704031.895 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:47:12.272Z,1520704032.272 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:47:12.685Z,1520704032.685 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:47:13.086Z,1520704033.086 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:47:13.472Z,1520704033.472 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:47:13.873Z,1520704033.873 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:47:14.273Z,1520704034.273 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:47:14.688Z,1520704034.688 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:47:15.079Z,1520704035.079 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:47:15.478Z,1520704035.478 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:47:15.895Z,1520704035.895 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:47:16.288Z,1520704036.288 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:47:16.680Z,1520704036.680 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:47:17.099Z,1520704037.099 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:47:17.481Z,1520704037.481 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:47:17.882Z,1520704037.882 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:47:18.279Z,1520704038.279 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:47:18.682Z,1520704038.682 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:47:19.082Z,1520704039.082 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:47:19.473Z,1520704039.473 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:47:19.873Z,1520704039.873 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:47:20.269Z,1520704040.269 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:47:20.673Z,1520704040.673 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:47:21.087Z,1520704041.087 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:47:21.483Z,1520704041.483 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:47:21.887Z,1520704041.887 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:47:22.287Z,1520704042.287 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:47:22.681Z,1520704042.681 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:47:23.080Z,1520704043.080 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:47:23.479Z,1520704043.479 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:47:23.874Z,1520704043.874 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:47:24.284Z,1520704044.284 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:47:24.680Z,1520704044.680 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:47:25.079Z,1520704045.079 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:47:25.483Z,1520704045.483 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:47:25.888Z,1520704045.888 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:47:26.290Z,1520704046.290 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:47:26.696Z,1520704046.695 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:47:27.089Z,1520704047.089 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:47:27.469Z,1520704047.469 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:47:27.889Z,1520704047.889 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:47:28.269Z,1520704048.269 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:47:28.669Z,1520704048.669 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:47:29.081Z,1520704049.081 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:47:32.331Z,1520704052.331 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:47:32.464Z,1520704052.464 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:47:32.837Z,1520704052.837 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:47:33.251Z,1520704053.251 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:47:33.648Z,1520704053.648 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:47:34.051Z,1520704054.051 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:47:34.452Z,1520704054.452 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:47:34.841Z,1520704054.841 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:47:35.237Z,1520704055.237 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:47:35.646Z,1520704055.646 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:47:36.033Z,1520704056.033 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:47:36.447Z,1520704056.447 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:47:36.838Z,1520704056.838 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:47:37.232Z,1520704057.232 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:47:37.635Z,1520704057.635 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:47:38.052Z,1520704058.052 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:47:38.455Z,1520704058.455 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:47:38.830Z,1520704058.830 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:47:39.233Z,1520704059.233 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:47:39.629Z,1520704059.629 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:47:40.029Z,1520704060.029 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:47:40.434Z,1520704060.434 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:47:40.833Z,1520704060.833 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:47:41.237Z,1520704061.237 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:47:41.632Z,1520704061.632 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:47:42.052Z,1520704062.052 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:47:42.456Z,1520704062.456 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:47:42.833Z,1520704062.833 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:47:43.232Z,1520704063.232 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:47:43.638Z,1520704063.638 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:47:44.039Z,1520704064.039 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:47:44.440Z,1520704064.440 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:47:44.845Z,1520704064.845 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:47:45.238Z,1520704065.238 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:47:45.637Z,1520704065.637 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:47:46.032Z,1520704066.032 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:47:46.432Z,1520704066.432 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:47:46.852Z,1520704066.852 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:47:47.228Z,1520704067.228 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:47:47.625Z,1520704067.625 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:47:48.029Z,1520704068.029 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:47:48.449Z,1520704068.449 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:47:48.828Z,1520704068.828 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:47:49.229Z,1520704069.229 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:47:49.649Z,1520704069.649 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:47:50.033Z,1520704070.033 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:47:50.429Z,1520704070.429 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:47:50.846Z,1520704070.846 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:47:51.252Z,1520704071.252 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:47:51.633Z,1520704071.633 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:47:52.028Z,1520704072.028 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:47:52.424Z,1520704072.424 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:47:52.845Z,1520704072.845 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:47:53.228Z,1520704073.228 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:47:53.624Z,1520704073.624 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:47:54.033Z,1520704074.033 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:47:54.448Z,1520704074.448 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:47:54.852Z,1520704074.852 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:47:55.248Z,1520704075.248 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:47:55.648Z,1520704075.648 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:47:56.025Z,1520704076.025 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:47:56.425Z,1520704076.425 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:47:56.848Z,1520704076.848 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:47:57.224Z,1520704077.224 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:47:57.633Z,1520704077.633 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:47:58.028Z,1520704078.028 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:47:58.429Z,1520704078.429 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:47:58.834Z,1520704078.834 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:47:59.237Z,1520704079.237 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:47:59.633Z,1520704079.633 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:48:00.034Z,1520704080.034 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:48:00.436Z,1520704080.436 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:48:00.842Z,1520704080.842 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:48:01.236Z,1520704081.236 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:48:01.636Z,1520704081.636 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:48:02.036Z,1520704082.036 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:48:02.446Z,1520704082.446 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:48:02.837Z,1520704082.837 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:48:03.237Z,1520704083.237 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:48:03.646Z,1520704083.646 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:48:04.046Z,1520704084.046 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:48:04.437Z,1520704084.437 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:48:04.844Z,1520704084.844 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:48:05.232Z,1520704085.232 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:48:05.641Z,1520704085.641 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:48:06.029Z,1520704086.029 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:48:06.441Z,1520704086.441 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:48:06.825Z,1520704086.825 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:48:07.247Z,1520704087.247 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:48:07.648Z,1520704087.648 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:48:08.035Z,1520704088.035 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:48:08.448Z,1520704088.448 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:48:08.829Z,1520704088.829 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:48:09.224Z,1520704089.224 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:48:09.633Z,1520704089.633 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:48:10.028Z,1520704090.028 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:48:10.432Z,1520704090.432 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:48:10.833Z,1520704090.833 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:48:11.234Z,1520704091.234 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:48:11.638Z,1520704091.638 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:48:12.038Z,1520704092.038 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:48:12.439Z,1520704092.439 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:48:12.844Z,1520704092.844 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:48:13.237Z,1520704093.237 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:48:13.637Z,1520704093.637 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:48:14.038Z,1520704094.038 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:48:14.445Z,1520704094.445 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:48:14.837Z,1520704094.837 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:48:15.246Z,1520704095.246 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:48:15.636Z,1520704095.636 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:48:16.036Z,1520704096.036 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:48:16.448Z,1520704096.448 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:48:16.848Z,1520704096.848 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:48:17.249Z,1520704097.249 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:48:17.652Z,1520704097.652 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:48:18.041Z,1520704098.041 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:48:18.428Z,1520704098.428 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:48:18.828Z,1520704098.828 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:48:19.233Z,1520704099.233 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:48:19.628Z,1520704099.628 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:48:20.028Z,1520704100.028 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:48:20.425Z,1520704100.425 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:48:20.849Z,1520704100.849 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:48:21.260Z,1520704101.260 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:48:21.650Z,1520704101.650 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:48:22.031Z,1520704102.031 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:48:22.430Z,1520704102.430 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:48:22.829Z,1520704102.829 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:48:23.229Z,1520704103.229 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:48:23.629Z,1520704103.629 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:48:24.033Z,1520704104.033 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:48:24.428Z,1520704104.428 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:48:24.832Z,1520704104.832 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:48:25.247Z,1520704105.247 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:48:25.647Z,1520704105.647 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:48:26.040Z,1520704106.040 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:48:26.433Z,1520704106.433 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:48:26.838Z,1520704106.838 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:48:27.237Z,1520704107.237 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:48:27.640Z,1520704107.640 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:48:28.037Z,1520704108.037 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:48:28.437Z,1520704108.437 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:48:28.837Z,1520704108.837 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:48:29.236Z,1520704109.236 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:48:29.637Z,1520704109.637 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:48:30.031Z,1520704110.031 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:48:30.432Z,1520704110.432 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:48:33.694Z,1520704113.694 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:48:33.839Z,1520704113.839 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:48:34.227Z,1520704114.227 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:48:34.612Z,1520704114.612 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:48:35.019Z,1520704115.019 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:48:35.417Z,1520704115.417 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:48:35.812Z,1520704115.812 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:48:36.219Z,1520704116.219 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:48:36.605Z,1520704116.605 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:48:37.009Z,1520704117.009 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:48:37.411Z,1520704117.411 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:48:37.814Z,1520704117.814 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:48:38.223Z,1520704118.223 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:48:38.627Z,1520704118.627 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:48:39.011Z,1520704119.011 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:48:39.413Z,1520704119.413 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:48:39.814Z,1520704119.814 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:48:40.213Z,1520704120.213 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:48:40.616Z,1520704120.616 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:48:41.015Z,1520704121.015 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:48:41.426Z,1520704121.426 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:48:41.822Z,1520704121.822 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:48:42.215Z,1520704122.215 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:48:42.626Z,1520704122.626 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:48:43.030Z,1520704123.030 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:48:43.405Z,1520704123.405 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:48:43.806Z,1520704123.806 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:48:44.214Z,1520704124.214 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:48:44.609Z,1520704124.609 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:48:45.013Z,1520704125.013 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:48:45.408Z,1520704125.408 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:48:45.808Z,1520704125.808 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:48:46.210Z,1520704126.210 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:48:46.614Z,1520704126.614 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:48:47.024Z,1520704127.024 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:48:47.420Z,1520704127.420 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:48:47.822Z,1520704127.822 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:48:48.220Z,1520704128.220 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:48:48.613Z,1520704128.613 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:48:49.021Z,1520704129.021 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:48:49.409Z,1520704129.409 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:48:49.824Z,1520704129.824 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:48:50.220Z,1520704130.220 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:48:50.619Z,1520704130.619 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:48:51.028Z,1520704131.028 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:48:51.423Z,1520704131.423 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:48:51.825Z,1520704131.825 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:48:52.227Z,1520704132.227 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:48:52.605Z,1520704132.605 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:48:53.005Z,1520704133.005 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:48:53.427Z,1520704133.427 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:48:53.808Z,1520704133.808 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:48:54.208Z,1520704134.208 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:48:54.604Z,1520704134.604 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:48:55.008Z,1520704135.008 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:48:55.416Z,1520704135.416 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:48:55.817Z,1520704135.817 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:48:56.231Z,1520704136.231 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:48:56.618Z,1520704136.618 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:48:57.022Z,1520704137.022 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:48:57.423Z,1520704137.423 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:48:57.808Z,1520704137.808 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:48:58.221Z,1520704138.221 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:48:58.620Z,1520704138.620 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:48:59.009Z,1520704139.009 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:48:59.403Z,1520704139.403 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:48:59.828Z,1520704139.828 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:49:00.218Z,1520704140.218 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:49:00.626Z,1520704140.626 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:49:01.028Z,1520704141.028 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:49:01.421Z,1520704141.421 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:49:01.831Z,1520704141.831 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:49:02.227Z,1520704142.227 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:49:02.613Z,1520704142.613 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:49:03.019Z,1520704143.019 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:49:03.417Z,1520704143.417 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:49:03.812Z,1520704143.812 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:49:04.214Z,1520704144.214 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:49:04.618Z,1520704144.618 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:49:05.016Z,1520704145.016 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:49:05.418Z,1520704145.418 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:49:05.813Z,1520704145.813 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:49:06.226Z,1520704146.226 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:49:06.626Z,1520704146.626 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:49:07.021Z,1520704147.021 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:49:07.408Z,1520704147.408 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:49:07.819Z,1520704147.819 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:49:08.222Z,1520704148.222 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:49:08.626Z,1520704148.626 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:49:09.030Z,1520704149.030 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:49:09.431Z,1520704149.431 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:49:09.832Z,1520704149.832 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:49:10.212Z,1520704150.212 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:49:10.604Z,1520704150.604 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:49:11.010Z,1520704151.010 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:49:11.408Z,1520704151.408 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:49:11.812Z,1520704151.812 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:49:12.212Z,1520704152.212 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:49:12.613Z,1520704152.613 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:49:13.023Z,1520704153.023 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:49:13.427Z,1520704153.427 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:49:13.820Z,1520704153.820 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:49:14.222Z,1520704154.222 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:49:14.627Z,1520704154.627 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:49:15.017Z,1520704155.017 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:49:15.414Z,1520704155.414 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:49:15.809Z,1520704155.809 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:49:16.219Z,1520704156.219 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:49:16.605Z,1520704156.605 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:49:17.018Z,1520704157.018 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:49:17.407Z,1520704157.407 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:49:17.821Z,1520704157.821 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:49:18.205Z,1520704158.205 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:49:18.625Z,1520704158.625 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:49:19.018Z,1520704159.018 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:49:19.435Z,1520704159.435 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:49:19.828Z,1520704159.828 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:49:20.214Z,1520704160.214 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:49:20.614Z,1520704160.614 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:49:21.012Z,1520704161.012 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:49:21.414Z,1520704161.414 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:49:21.809Z,1520704161.809 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:49:22.220Z,1520704162.220 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:49:22.617Z,1520704162.617 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:49:23.017Z,1520704163.017 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:49:23.420Z,1520704163.420 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:49:23.831Z,1520704163.831 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:49:24.212Z,1520704164.212 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:49:24.632Z,1520704164.632 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:49:25.015Z,1520704165.015 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:49:25.420Z,1520704165.420 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:49:25.814Z,1520704165.814 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:49:26.213Z,1520704166.213 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:49:26.613Z,1520704166.613 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:49:27.016Z,1520704167.016 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:49:27.422Z,1520704167.422 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:49:27.816Z,1520704167.816 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:49:28.216Z,1520704168.216 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:49:28.617Z,1520704168.617 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:49:28.648Z,1520704168.648 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-03-10T17:44:28.5Z
2018-03-10T17:49:28.648Z,1520704168.648 [Default:CheckIn:Read_GPS] Stopped
2018-03-10T17:49:28.648Z,1520704168.648 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-03-10T17:49:29.027Z,1520704169.027 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:49:29.579Z,1520704169.579 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:49:32.742Z,1520704172.742 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:49:32.923Z,1520704172.923 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:49:33.255Z,1520704173.255 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20180310T051512/Courier0296.lzma
2018-03-10T17:49:33.290Z,1520704173.290 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:49:33.681Z,1520704173.681 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:49:34.054Z,1520704174.054 [DataOverHttps](INFO): Moved sent file to Logs/20180310T051512/Courier0296.lzma.bak
2018-03-10T17:49:34.054Z,1520704174.054 [DataOverHttps](INFO): SBD MOMSN=8006764
2018-03-10T17:49:34.088Z,1520704174.088 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:49:34.789Z,1520704174.789 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:49:34.915Z,1520704174.915 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:49:38.103Z,1520704178.103 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:49:38.246Z,1520704178.246 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:49:38.623Z,1520704178.623 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:49:39.027Z,1520704179.027 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:49:39.427Z,1520704179.427 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:49:39.820Z,1520704179.820 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:49:40.220Z,1520704180.220 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:49:43.394Z,1520704183.394 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:49:43.522Z,1520704183.522 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:49:43.859Z,1520704183.859 [DataOverHttps](INFO): Sending 158 bytes from file Logs/20180310T051512/Express0297.lzma
2018-03-10T17:49:43.880Z,1520704183.880 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:49:44.291Z,1520704184.291 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:49:44.657Z,1520704184.657 [DataOverHttps](INFO): Moved sent file to Logs/20180310T051512/Express0297.lzma.bak
2018-03-10T17:49:44.658Z,1520704184.658 [DataOverHttps](INFO): SBD MOMSN=8006766
2018-03-10T17:49:44.732Z,1520704184.732 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:49:45.385Z,1520704185.385 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:49:45.425Z,1520704185.425 [Default:CheckIn:Read_Iridium] Stopped
2018-03-10T17:49:45.425Z,1520704185.425 [Default:CheckIn:C.Wait] Running Loop=1
2018-03-10T17:49:45.425Z,1520704185.425 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-03-10T17:49:45.541Z,1520704185.541 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:49:45.874Z,1520704185.874 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:49:49.088Z,1520704189.088 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session.
2018-03-10T17:49:49.105Z,1520704189.105 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:49:49.148Z,1520704189.148 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T17:49:49.148Z,1520704189.148 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 4
2018-03-10T17:49:49.148Z,1520704189.148 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-10T17:49:49.189Z,1520704189.189 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-10T17:49:49.258Z,1520704189.258 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:49:49.331Z,1520704189.331 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-10T17:49:49.331Z,1520704189.331 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 4
2018-03-10T17:49:49.638Z,1520704189.638 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:49:49.659Z,1520704189.659 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-10T17:49:49.660Z,1520704189.660 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-10T17:49:49.660Z,1520704189.660 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-10T17:49:50.032Z,1520704190.032 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:49:50.436Z,1520704190.436 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:49:50.841Z,1520704190.841 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:49:51.237Z,1520704191.237 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:49:51.632Z,1520704191.632 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:49:52.028Z,1520704192.028 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:49:52.433Z,1520704192.433 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:49:52.833Z,1520704192.833 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:49:53.232Z,1520704193.232 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:49:53.633Z,1520704193.633 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:49:54.028Z,1520704194.028 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:49:54.432Z,1520704194.432 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:49:54.836Z,1520704194.836 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:49:55.232Z,1520704195.232 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:49:55.633Z,1520704195.633 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:49:56.027Z,1520704196.027 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:49:56.428Z,1520704196.428 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:49:56.844Z,1520704196.844 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:49:57.220Z,1520704197.220 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:49:57.646Z,1520704197.646 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:49:58.045Z,1520704198.045 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:49:58.423Z,1520704198.423 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:49:58.845Z,1520704198.845 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:49:59.224Z,1520704199.224 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:49:59.628Z,1520704199.628 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:50:00.025Z,1520704200.025 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:50:00.426Z,1520704200.426 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:50:00.828Z,1520704200.828 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:50:01.225Z,1520704201.225 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:50:01.624Z,1520704201.624 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:50:02.024Z,1520704202.024 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:50:02.429Z,1520704202.429 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:50:02.825Z,1520704202.825 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:50:03.220Z,1520704203.220 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:50:03.633Z,1520704203.633 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:50:04.024Z,1520704204.024 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:50:04.429Z,1520704204.429 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:50:04.833Z,1520704204.833 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:50:05.229Z,1520704205.229 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:50:05.632Z,1520704205.632 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:50:06.030Z,1520704206.030 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:50:06.442Z,1520704206.442 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:50:06.832Z,1520704206.832 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:50:07.238Z,1520704207.238 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:50:07.627Z,1520704207.627 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:50:08.036Z,1520704208.036 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:50:08.437Z,1520704208.437 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:50:08.824Z,1520704208.824 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:50:09.224Z,1520704209.224 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:50:09.624Z,1520704209.624 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:50:10.024Z,1520704210.024 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:50:10.423Z,1520704210.423 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:50:10.824Z,1520704210.824 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:50:11.241Z,1520704211.241 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:50:11.634Z,1520704211.634 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:50:12.034Z,1520704212.034 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:50:12.430Z,1520704212.430 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:50:12.913Z,1520704212.913 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:50:13.232Z,1520704213.232 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:50:13.637Z,1520704213.637 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:50:14.033Z,1520704214.033 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:50:14.435Z,1520704214.435 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:50:14.834Z,1520704214.834 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:50:15.232Z,1520704215.232 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:50:15.637Z,1520704215.637 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:50:16.028Z,1520704216.028 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:50:16.436Z,1520704216.436 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:50:16.824Z,1520704216.824 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:50:17.223Z,1520704217.223 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:50:17.643Z,1520704217.643 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:50:18.024Z,1520704218.024 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:50:18.445Z,1520704218.445 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:50:18.825Z,1520704218.825 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:50:19.221Z,1520704219.221 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:50:19.608Z,1520704219.608 [NAL9602](INFO): Powering down
2018-03-10T17:50:19.627Z,1520704219.627 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:50:20.025Z,1520704220.025 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:50:20.425Z,1520704220.425 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:50:20.830Z,1520704220.830 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:50:21.229Z,1520704221.229 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:50:21.631Z,1520704221.631 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:50:22.028Z,1520704222.028 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:50:22.428Z,1520704222.428 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:50:22.831Z,1520704222.831 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:50:23.240Z,1520704223.240 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:50:23.629Z,1520704223.629 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:50:24.032Z,1520704224.032 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:50:24.432Z,1520704224.432 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:50:24.828Z,1520704224.828 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:50:25.227Z,1520704225.227 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:50:25.642Z,1520704225.642 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:50:26.031Z,1520704226.031 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:50:26.428Z,1520704226.428 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:50:26.828Z,1520704226.828 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:50:27.227Z,1520704227.227 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:50:27.628Z,1520704227.628 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:50:28.028Z,1520704228.028 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:50:28.432Z,1520704228.432 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:50:28.820Z,1520704228.820 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:50:29.228Z,1520704229.228 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:50:29.624Z,1520704229.624 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:50:30.024Z,1520704230.024 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:50:30.436Z,1520704230.436 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:50:30.820Z,1520704230.820 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:50:31.224Z,1520704231.224 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:50:31.624Z,1520704231.624 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:50:32.020Z,1520704232.020 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:50:32.420Z,1520704232.420 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:50:32.824Z,1520704232.824 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:50:33.220Z,1520704233.220 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:50:33.636Z,1520704233.636 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:50:34.024Z,1520704234.024 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:50:34.428Z,1520704234.428 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:50:34.828Z,1520704234.828 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:50:35.225Z,1520704235.225 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:50:35.624Z,1520704235.624 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:50:36.024Z,1520704236.024 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:50:36.436Z,1520704236.436 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:50:36.824Z,1520704236.824 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:50:37.230Z,1520704237.230 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:50:37.639Z,1520704237.639 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:50:38.029Z,1520704238.029 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:50:38.432Z,1520704238.432 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:50:38.831Z,1520704238.831 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:50:39.228Z,1520704239.228 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:50:39.629Z,1520704239.629 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:50:40.030Z,1520704240.030 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:50:40.433Z,1520704240.433 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:50:40.835Z,1520704240.835 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:50:41.228Z,1520704241.228 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:50:41.636Z,1520704241.636 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:50:42.036Z,1520704242.036 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:50:42.442Z,1520704242.442 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:50:42.833Z,1520704242.833 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:50:43.224Z,1520704243.224 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:50:43.644Z,1520704243.644 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:50:44.024Z,1520704244.024 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:50:44.436Z,1520704244.436 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:50:44.845Z,1520704244.845 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:50:45.220Z,1520704245.220 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:50:45.624Z,1520704245.624 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:50:46.024Z,1520704246.024 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:50:49.256Z,1520704249.256 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:50:49.389Z,1520704249.389 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:50:49.783Z,1520704249.783 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:50:50.174Z,1520704250.174 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:50:50.576Z,1520704250.576 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:50:50.977Z,1520704250.977 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:50:51.370Z,1520704251.370 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:50:51.769Z,1520704251.769 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:50:52.175Z,1520704252.175 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:50:52.570Z,1520704252.570 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:50:52.969Z,1520704252.969 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:50:53.370Z,1520704253.370 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:50:53.768Z,1520704253.768 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:50:54.177Z,1520704254.177 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:50:54.572Z,1520704254.572 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:50:54.976Z,1520704254.976 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:50:55.372Z,1520704255.372 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:50:55.771Z,1520704255.771 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:50:56.178Z,1520704256.178 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:50:56.572Z,1520704256.572 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:50:56.984Z,1520704256.984 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:50:57.360Z,1520704257.360 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:50:57.760Z,1520704257.760 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:50:58.168Z,1520704258.168 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:50:58.563Z,1520704258.563 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:50:58.976Z,1520704258.976 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:50:59.364Z,1520704259.364 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:50:59.776Z,1520704259.776 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:51:00.158Z,1520704260.158 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:51:00.564Z,1520704260.564 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:51:00.983Z,1520704260.983 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:51:01.377Z,1520704261.377 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:51:01.764Z,1520704261.764 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:51:02.167Z,1520704262.167 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:51:02.567Z,1520704262.567 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:51:02.964Z,1520704262.964 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:51:03.385Z,1520704263.385 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:51:03.765Z,1520704263.765 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:51:04.165Z,1520704264.165 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:51:04.565Z,1520704264.565 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:51:04.969Z,1520704264.969 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:51:05.368Z,1520704265.368 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:51:05.775Z,1520704265.775 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:51:06.173Z,1520704266.173 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:51:06.570Z,1520704266.570 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:51:06.965Z,1520704266.965 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:51:07.371Z,1520704267.371 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:51:07.768Z,1520704267.768 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:51:08.172Z,1520704268.172 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:51:08.574Z,1520704268.574 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:51:08.974Z,1520704268.974 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:51:09.372Z,1520704269.372 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:51:09.769Z,1520704269.769 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:51:10.172Z,1520704270.172 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:51:10.584Z,1520704270.584 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:51:10.972Z,1520704270.972 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:51:11.372Z,1520704271.372 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:51:11.777Z,1520704271.777 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:51:12.172Z,1520704272.172 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:51:12.576Z,1520704272.576 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:51:12.960Z,1520704272.960 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:51:13.360Z,1520704273.360 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:51:13.782Z,1520704273.782 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:51:14.159Z,1520704274.159 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:51:14.564Z,1520704274.564 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:51:14.964Z,1520704274.964 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:51:15.363Z,1520704275.363 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:51:15.764Z,1520704275.764 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:51:16.164Z,1520704276.164 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:51:16.564Z,1520704276.564 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:51:16.960Z,1520704276.960 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:51:17.368Z,1520704277.368 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:51:17.764Z,1520704277.764 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:51:18.168Z,1520704278.168 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:51:18.575Z,1520704278.575 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:51:18.968Z,1520704278.968 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:51:19.372Z,1520704279.372 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:51:19.769Z,1520704279.769 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:51:20.169Z,1520704280.169 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:51:20.565Z,1520704280.565 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:51:20.980Z,1520704280.980 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:51:21.369Z,1520704281.369 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:51:21.758Z,1520704281.758 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:51:22.173Z,1520704282.173 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:51:22.571Z,1520704282.571 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:51:22.967Z,1520704282.967 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:51:23.373Z,1520704283.373 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:51:23.772Z,1520704283.772 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:51:24.166Z,1520704284.166 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:51:24.575Z,1520704284.575 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:51:24.978Z,1520704284.978 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:51:25.365Z,1520704285.365 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:51:25.772Z,1520704285.772 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:51:26.168Z,1520704286.168 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:51:26.578Z,1520704286.578 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:51:26.971Z,1520704286.971 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:51:27.384Z,1520704287.384 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:51:27.764Z,1520704287.764 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:51:28.164Z,1520704288.164 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:51:28.564Z,1520704288.564 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:51:28.977Z,1520704288.977 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:51:29.363Z,1520704289.363 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:51:29.790Z,1520704289.790 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:51:30.160Z,1520704290.160 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:51:30.576Z,1520704290.576 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:51:30.977Z,1520704290.977 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:51:31.360Z,1520704291.360 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:51:31.764Z,1520704291.764 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:51:32.164Z,1520704292.164 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:51:32.562Z,1520704292.562 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:51:32.968Z,1520704292.968 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:51:33.368Z,1520704293.368 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:51:33.764Z,1520704293.764 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:51:34.164Z,1520704294.164 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:51:34.569Z,1520704294.569 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:51:34.960Z,1520704294.960 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:51:35.364Z,1520704295.364 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:51:35.769Z,1520704295.769 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:51:36.168Z,1520704296.168 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:51:36.564Z,1520704296.564 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:51:36.968Z,1520704296.968 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:51:37.364Z,1520704297.364 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:51:37.776Z,1520704297.776 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:51:38.172Z,1520704298.172 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:51:38.564Z,1520704298.564 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:51:38.970Z,1520704298.970 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:51:39.400Z,1520704299.400 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:51:40.083Z,1520704300.083 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:51:40.592Z,1520704300.592 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:51:41.991Z,1520704301.991 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:51:42.757Z,1520704302.757 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:51:42.912Z,1520704302.912 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:51:43.309Z,1520704303.309 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:51:43.701Z,1520704303.701 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:51:44.109Z,1520704304.109 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:51:44.516Z,1520704304.516 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:51:44.913Z,1520704304.913 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:51:45.298Z,1520704305.298 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:51:45.716Z,1520704305.716 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:51:46.098Z,1520704306.098 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:51:53.455Z,1520704313.455 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:51:53.469Z,1520704313.469 [BPC1](ERROR): Failed to receive battery data
2018-03-10T17:51:53.469Z,1520704313.469 [BPC1] Communications Fault, FailCount= 1
2018-03-10T17:51:53.469Z,1520704313.469 [BPC1](ERROR): Communications Fault
2018-03-10T17:51:53.550Z,1520704313.550 [CBIT](ERROR): Communications Fault in component: BPC1
2018-03-10T17:51:53.636Z,1520704313.636 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:51:53.994Z,1520704313.994 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:51:54.408Z,1520704314.408 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:51:54.538Z,1520704314.538 [CBIT](INFO): Clearing failed state for component BPC1
2018-03-10T17:51:54.538Z,1520704314.538 [BPC1] No Fault, FailCount= 1
2018-03-10T17:51:54.824Z,1520704314.824 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:51:55.215Z,1520704315.215 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:51:55.612Z,1520704315.612 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:51:55.995Z,1520704315.995 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:51:56.398Z,1520704316.398 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:51:56.795Z,1520704316.795 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:51:57.206Z,1520704317.206 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:51:57.594Z,1520704317.594 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:51:58.020Z,1520704318.020 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:51:58.400Z,1520704318.400 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:51:58.812Z,1520704318.812 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:51:59.206Z,1520704319.206 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:51:59.595Z,1520704319.595 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:52:00.025Z,1520704320.025 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:52:00.450Z,1520704320.450 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:52:00.876Z,1520704320.876 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:52:01.212Z,1520704321.212 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:52:01.606Z,1520704321.606 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:52:02.003Z,1520704322.003 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:52:02.399Z,1520704322.399 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:52:02.804Z,1520704322.804 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:52:03.194Z,1520704323.194 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:52:03.626Z,1520704323.626 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:52:04.018Z,1520704324.018 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:52:04.433Z,1520704324.433 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:52:04.812Z,1520704324.812 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:52:05.220Z,1520704325.220 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:52:05.642Z,1520704325.642 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:52:06.017Z,1520704326.017 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:52:06.436Z,1520704326.436 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:52:06.845Z,1520704326.845 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:52:07.195Z,1520704327.195 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:52:07.601Z,1520704327.601 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:52:08.004Z,1520704328.004 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:52:08.398Z,1520704328.398 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:52:08.805Z,1520704328.805 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:52:09.224Z,1520704329.224 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:52:09.594Z,1520704329.594 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:52:10.015Z,1520704330.015 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:52:10.404Z,1520704330.404 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:52:10.801Z,1520704330.801 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:52:11.210Z,1520704331.210 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:52:11.602Z,1520704331.602 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:52:12.005Z,1520704332.005 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:52:12.404Z,1520704332.404 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:52:12.795Z,1520704332.795 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:52:13.193Z,1520704333.193 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:52:13.594Z,1520704333.594 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:52:13.993Z,1520704333.993 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:52:14.393Z,1520704334.393 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:52:14.794Z,1520704334.794 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:52:15.195Z,1520704335.195 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:52:15.602Z,1520704335.602 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:52:15.995Z,1520704335.995 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:52:16.402Z,1520704336.402 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:52:16.796Z,1520704336.796 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:52:17.202Z,1520704337.202 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:52:17.613Z,1520704337.613 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:52:17.995Z,1520704337.995 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:52:18.395Z,1520704338.395 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:52:18.793Z,1520704338.793 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:52:19.195Z,1520704339.195 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:52:19.601Z,1520704339.601 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:52:20.002Z,1520704340.002 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:52:20.401Z,1520704340.401 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:52:20.805Z,1520704340.805 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:52:21.212Z,1520704341.212 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:52:21.615Z,1520704341.615 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:52:21.995Z,1520704341.995 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:52:22.430Z,1520704342.430 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:52:22.832Z,1520704342.832 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:52:23.205Z,1520704343.205 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:52:23.604Z,1520704343.604 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:52:24.005Z,1520704344.005 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:52:24.470Z,1520704344.470 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:52:24.794Z,1520704344.794 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:52:25.237Z,1520704345.237 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:52:25.266Z,1520704345.266 [BPC1](FAULT): Failed to initialize
2018-03-10T17:52:25.266Z,1520704345.266 [BPC1] Communications Fault, FailCount= 2
2018-03-10T17:52:25.266Z,1520704345.266 [BPC1](ERROR): Communications Fault
2018-03-10T17:52:25.364Z,1520704345.364 [CBIT](ERROR): Communications Fault in component: BPC1
2018-03-10T17:52:25.620Z,1520704345.620 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:52:26.005Z,1520704346.005 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:52:26.402Z,1520704346.402 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:52:26.457Z,1520704346.457 [CBIT](INFO): Clearing failed state for component BPC1
2018-03-10T17:52:26.457Z,1520704346.457 [BPC1] No Fault, FailCount= 2
2018-03-10T17:52:26.805Z,1520704346.805 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:52:27.196Z,1520704347.196 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:52:27.593Z,1520704347.593 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:52:27.995Z,1520704347.995 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:52:28.421Z,1520704348.421 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:52:28.845Z,1520704348.845 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:52:29.201Z,1520704349.201 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:52:29.621Z,1520704349.621 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:52:30.003Z,1520704350.003 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:52:30.413Z,1520704350.413 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:52:30.793Z,1520704350.793 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:52:31.193Z,1520704351.193 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:52:31.619Z,1520704351.619 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:52:31.994Z,1520704351.994 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:52:32.394Z,1520704352.394 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:52:32.792Z,1520704352.792 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:52:33.229Z,1520704353.229 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:52:33.594Z,1520704353.594 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:52:34.003Z,1520704354.003 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:52:34.411Z,1520704354.411 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:52:34.803Z,1520704354.803 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:52:35.201Z,1520704355.201 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:52:35.593Z,1520704355.593 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:52:36.020Z,1520704356.020 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:52:36.394Z,1520704356.394 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:52:36.801Z,1520704356.801 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:52:37.201Z,1520704357.201 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:52:37.603Z,1520704357.603 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:52:38.004Z,1520704358.004 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:52:38.401Z,1520704358.401 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:52:38.801Z,1520704358.801 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:52:39.204Z,1520704359.204 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:52:39.594Z,1520704359.594 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:52:39.994Z,1520704359.994 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:52:40.394Z,1520704360.394 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:52:40.793Z,1520704360.793 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:52:41.192Z,1520704361.192 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:52:41.606Z,1520704361.606 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:52:42.006Z,1520704362.006 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:52:42.394Z,1520704362.394 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:52:42.799Z,1520704362.799 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:52:43.194Z,1520704363.194 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:52:43.602Z,1520704363.602 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:52:44.001Z,1520704364.001 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:52:44.393Z,1520704364.393 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:52:44.797Z,1520704364.797 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:52:45.194Z,1520704365.194 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:52:45.592Z,1520704365.592 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:52:45.993Z,1520704365.993 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:52:46.394Z,1520704366.394 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:52:52.050Z,1520704372.050 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:52:52.092Z,1520704372.092 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T17:52:52.092Z,1520704372.092 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 5
2018-03-10T17:52:52.092Z,1520704372.092 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-10T17:52:52.105Z,1520704372.105 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-10T17:52:52.202Z,1520704372.202 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:52:52.275Z,1520704372.275 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-10T17:52:52.275Z,1520704372.275 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 5
2018-03-10T17:52:52.551Z,1520704372.551 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:52:52.606Z,1520704372.606 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-10T17:52:52.606Z,1520704372.606 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-10T17:52:52.608Z,1520704372.608 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-10T17:52:52.974Z,1520704372.974 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:52:53.350Z,1520704373.350 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:52:53.749Z,1520704373.749 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:52:54.152Z,1520704374.152 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:52:54.552Z,1520704374.552 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:52:54.963Z,1520704374.963 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:52:55.349Z,1520704375.349 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:52:55.740Z,1520704375.740 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:52:56.173Z,1520704376.173 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:52:56.541Z,1520704376.541 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:52:56.951Z,1520704376.951 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:52:56.960Z,1520704376.960 [BPC1](FAULT): Failed to initialize
2018-03-10T17:52:56.960Z,1520704376.960 [BPC1] Communications Fault, FailCount= 3
2018-03-10T17:52:56.960Z,1520704376.960 [BPC1](ERROR): Communications Fault
2018-03-10T17:52:57.018Z,1520704377.018 [CBIT](ERROR): Communications Fault in component: BPC1
2018-03-10T17:52:57.348Z,1520704377.348 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:52:57.768Z,1520704377.768 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:52:58.152Z,1520704378.152 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:52:58.264Z,1520704378.264 [CBIT](INFO): Clearing failed state for component BPC1
2018-03-10T17:52:58.264Z,1520704378.264 [BPC1] No Fault, FailCount= 3
2018-03-10T17:52:58.545Z,1520704378.545 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:52:58.941Z,1520704378.941 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:52:59.367Z,1520704379.367 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:52:59.743Z,1520704379.743 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:53:00.146Z,1520704380.146 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:53:00.551Z,1520704380.551 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:53:00.950Z,1520704380.950 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:53:01.360Z,1520704381.360 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:53:01.749Z,1520704381.749 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:53:02.151Z,1520704382.151 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:53:02.542Z,1520704382.542 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:53:02.945Z,1520704382.945 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:53:03.342Z,1520704383.342 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:53:03.742Z,1520704383.742 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:53:04.146Z,1520704384.146 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:53:04.550Z,1520704384.550 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:53:04.950Z,1520704384.950 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:53:05.350Z,1520704385.350 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:53:05.741Z,1520704385.741 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:53:06.167Z,1520704386.167 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:53:06.567Z,1520704386.567 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:53:06.972Z,1520704386.972 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:53:07.340Z,1520704387.340 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:53:07.742Z,1520704387.742 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:53:08.141Z,1520704388.141 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:53:08.542Z,1520704388.542 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:53:08.950Z,1520704388.950 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:53:09.351Z,1520704389.351 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:53:09.751Z,1520704389.751 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:53:10.172Z,1520704390.172 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:53:10.541Z,1520704390.541 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:53:10.943Z,1520704390.943 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:53:11.341Z,1520704391.341 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:53:11.743Z,1520704391.743 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:53:12.140Z,1520704392.140 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:53:12.541Z,1520704392.541 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:53:12.943Z,1520704392.943 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:53:13.341Z,1520704393.341 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:53:13.780Z,1520704393.780 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:53:14.173Z,1520704394.173 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:53:14.553Z,1520704394.553 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:53:14.951Z,1520704394.951 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:53:15.350Z,1520704395.350 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:53:15.752Z,1520704395.751 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:53:16.163Z,1520704396.163 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:53:16.542Z,1520704396.542 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:53:16.942Z,1520704396.942 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:53:17.342Z,1520704397.342 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:53:17.746Z,1520704397.746 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:53:18.173Z,1520704398.173 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:53:18.550Z,1520704398.550 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:53:18.958Z,1520704398.958 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:53:19.356Z,1520704399.356 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:53:19.753Z,1520704399.753 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:53:20.141Z,1520704400.141 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:53:20.541Z,1520704400.541 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:53:20.967Z,1520704400.967 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:53:21.347Z,1520704401.347 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:53:21.742Z,1520704401.742 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:53:22.168Z,1520704402.168 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:53:22.541Z,1520704402.541 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:53:22.950Z,1520704402.950 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:53:23.351Z,1520704403.351 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:53:23.751Z,1520704403.751 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:53:24.140Z,1520704404.140 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:53:24.542Z,1520704404.542 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:53:24.941Z,1520704404.941 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:53:25.369Z,1520704405.369 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:53:25.741Z,1520704405.741 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:53:26.156Z,1520704406.156 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:53:26.568Z,1520704406.568 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:53:26.943Z,1520704406.943 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:53:27.341Z,1520704407.341 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:53:27.746Z,1520704407.746 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:53:28.154Z,1520704408.154 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:53:28.551Z,1520704408.551 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:53:28.949Z,1520704408.949 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:53:28.958Z,1520704408.958 [BPC1](FAULT): Failed to initialize
2018-03-10T17:53:28.958Z,1520704408.958 [BPC1] Communications Fault, FailCount= 4
2018-03-10T17:53:28.958Z,1520704408.958 [BPC1](ERROR): Communications Fault
2018-03-10T17:53:28.981Z,1520704408.981 [CBIT](ERROR): Communications Fault in component: BPC1
2018-03-10T17:53:29.341Z,1520704409.341 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:53:29.766Z,1520704409.766 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:53:30.140Z,1520704410.140 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:53:30.220Z,1520704410.220 [CBIT](INFO): Clearing failed state for component BPC1
2018-03-10T17:53:30.220Z,1520704410.220 [BPC1] No Fault, FailCount= 4
2018-03-10T17:53:30.571Z,1520704410.571 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:53:30.976Z,1520704410.976 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:53:31.366Z,1520704411.366 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:53:31.762Z,1520704411.762 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:53:32.157Z,1520704412.157 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:53:32.552Z,1520704412.552 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:53:32.953Z,1520704412.953 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:53:33.350Z,1520704413.350 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:53:33.749Z,1520704413.749 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:53:34.163Z,1520704414.163 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:53:34.550Z,1520704414.550 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:53:34.955Z,1520704414.955 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:53:35.343Z,1520704415.343 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:53:35.741Z,1520704415.741 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:53:36.142Z,1520704416.142 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:53:36.545Z,1520704416.545 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:53:36.968Z,1520704416.968 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:53:37.343Z,1520704417.343 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:53:37.783Z,1520704417.783 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:53:38.150Z,1520704418.150 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:53:38.550Z,1520704418.550 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:53:38.950Z,1520704418.950 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:53:39.347Z,1520704419.347 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:53:39.754Z,1520704419.754 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:53:40.141Z,1520704420.141 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:53:40.542Z,1520704420.542 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:53:40.942Z,1520704420.942 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:53:41.343Z,1520704421.343 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:53:41.746Z,1520704421.746 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:53:42.148Z,1520704422.148 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:53:42.567Z,1520704422.567 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:53:42.951Z,1520704422.951 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:53:43.354Z,1520704423.354 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:53:43.741Z,1520704423.741 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:53:44.141Z,1520704424.141 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:53:44.541Z,1520704424.541 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:53:44.942Z,1520704424.942 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:53:45.349Z,1520704425.349 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:53:45.741Z,1520704425.741 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:53:46.142Z,1520704426.142 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:53:46.541Z,1520704426.541 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:53:51.131Z,1520704431.131 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:53:51.288Z,1520704431.288 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:53:51.694Z,1520704431.694 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:53:52.083Z,1520704432.083 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:53:52.487Z,1520704432.487 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:53:52.886Z,1520704432.886 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:53:53.274Z,1520704433.274 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:53:53.677Z,1520704433.677 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:53:54.073Z,1520704434.073 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:53:54.494Z,1520704434.494 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:53:54.874Z,1520704434.874 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:53:55.272Z,1520704435.272 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:53:55.673Z,1520704435.673 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:53:56.081Z,1520704436.081 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:53:56.473Z,1520704436.473 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:53:56.884Z,1520704436.884 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:53:57.282Z,1520704437.282 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:53:57.685Z,1520704437.685 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:53:58.082Z,1520704438.082 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:53:58.498Z,1520704438.498 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:53:58.899Z,1520704438.899 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:53:59.273Z,1520704439.273 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:53:59.674Z,1520704439.674 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:54:00.094Z,1520704440.094 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:54:00.487Z,1520704440.487 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:54:00.932Z,1520704440.932 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:54:01.296Z,1520704441.296 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:54:01.700Z,1520704441.700 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:54:02.075Z,1520704442.075 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:54:02.507Z,1520704442.507 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:54:02.885Z,1520704442.885 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:54:03.272Z,1520704443.272 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:54:03.673Z,1520704443.673 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:54:04.075Z,1520704444.075 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:54:04.476Z,1520704444.476 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:54:04.882Z,1520704444.882 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:54:05.282Z,1520704445.282 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:54:05.682Z,1520704445.682 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:54:06.071Z,1520704446.071 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:54:06.481Z,1520704446.481 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:54:06.882Z,1520704446.882 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:54:07.274Z,1520704447.274 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:54:07.674Z,1520704447.674 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:54:08.081Z,1520704448.081 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:54:08.486Z,1520704448.486 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:54:08.873Z,1520704448.873 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:54:09.276Z,1520704449.276 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:54:09.681Z,1520704449.681 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:54:10.082Z,1520704450.082 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:54:10.496Z,1520704450.496 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:54:10.954Z,1520704450.954 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:54:11.285Z,1520704451.285 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:54:11.726Z,1520704451.726 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:54:12.073Z,1520704452.073 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:54:12.474Z,1520704452.474 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:54:12.896Z,1520704452.896 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:54:13.275Z,1520704453.275 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:54:13.685Z,1520704453.685 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:54:14.085Z,1520704454.085 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:54:14.473Z,1520704454.473 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:54:14.902Z,1520704454.902 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:54:15.284Z,1520704455.284 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:54:15.684Z,1520704455.684 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:54:16.083Z,1520704456.083 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:54:16.481Z,1520704456.481 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:54:16.881Z,1520704456.881 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:54:17.281Z,1520704457.281 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:54:17.683Z,1520704457.683 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:54:18.073Z,1520704458.073 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:54:18.473Z,1520704458.473 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:54:18.874Z,1520704458.874 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:54:19.278Z,1520704459.278 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:54:19.673Z,1520704459.673 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:54:20.074Z,1520704460.074 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:54:20.482Z,1520704460.482 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:54:20.889Z,1520704460.889 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:54:21.280Z,1520704461.280 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:54:21.685Z,1520704461.685 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:54:22.084Z,1520704462.084 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:54:22.473Z,1520704462.473 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:54:22.895Z,1520704462.895 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:54:23.274Z,1520704463.274 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:54:23.673Z,1520704463.673 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:54:24.075Z,1520704464.075 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:54:24.483Z,1520704464.483 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:54:24.872Z,1520704464.872 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:54:25.273Z,1520704465.273 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:54:25.685Z,1520704465.685 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:54:26.100Z,1520704466.100 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:54:26.480Z,1520704466.480 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:54:26.879Z,1520704466.879 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:54:27.293Z,1520704467.293 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:54:27.684Z,1520704467.684 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:54:28.083Z,1520704468.083 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:54:28.482Z,1520704468.482 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:54:28.902Z,1520704468.902 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:54:29.307Z,1520704469.307 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:54:29.673Z,1520704469.673 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:54:30.075Z,1520704470.075 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:54:30.478Z,1520704470.478 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:54:30.889Z,1520704470.889 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:54:31.290Z,1520704471.290 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:54:31.681Z,1520704471.681 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:54:32.083Z,1520704472.083 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:54:32.486Z,1520704472.486 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:54:32.886Z,1520704472.886 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:54:33.285Z,1520704473.285 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:54:33.683Z,1520704473.683 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:54:34.075Z,1520704474.075 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:54:34.473Z,1520704474.473 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:54:34.875Z,1520704474.875 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:54:35.273Z,1520704475.273 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:54:35.673Z,1520704475.673 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:54:36.075Z,1520704476.075 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:54:36.474Z,1520704476.474 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:54:36.885Z,1520704476.885 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:54:37.284Z,1520704477.284 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:54:37.689Z,1520704477.689 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:54:38.082Z,1520704478.082 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:54:38.481Z,1520704478.481 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:54:38.883Z,1520704478.884 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:54:39.273Z,1520704479.273 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:54:39.673Z,1520704479.673 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:54:40.085Z,1520704480.085 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:54:40.473Z,1520704480.473 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:54:40.875Z,1520704480.875 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:54:41.285Z,1520704481.285 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:54:41.685Z,1520704481.685 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:54:42.086Z,1520704482.086 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:54:42.481Z,1520704482.481 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:54:42.882Z,1520704482.882 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:54:43.285Z,1520704483.285 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:54:43.682Z,1520704483.682 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:54:44.081Z,1520704484.081 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:54:44.482Z,1520704484.482 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:54:44.873Z,1520704484.873 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:54:45.273Z,1520704485.273 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:54:45.674Z,1520704485.674 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:54:45.722Z,1520704485.722 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-03-10T17:54:45.722Z,1520704485.722 [Default:CheckIn:C.Wait] Stopped
2018-03-10T17:54:45.722Z,1520704485.722 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-03-10T17:54:45.722Z,1520704485.722 [Default:CheckIn:D] Running Loop=1
2018-03-10T17:54:46.073Z,1520704486.073 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:54:46.106Z,1520704486.106 [Default:CheckIn:D] Stopped
2018-03-10T17:54:46.106Z,1520704486.106 [Default:CheckIn:E] Running Loop=1
2018-03-10T17:54:46.475Z,1520704486.475 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:54:46.525Z,1520704486.525 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 755.469727 min 
2018-03-10T17:54:46.525Z,1520704486.525 [Default:CheckIn:E] Stopped
2018-03-10T17:54:46.525Z,1520704486.525 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-03-10T17:54:46.525Z,1520704486.525 [Default:CheckIn] Stopped
2018-03-10T17:54:46.525Z,1520704486.525 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-03-10T17:54:46.526Z,1520704486.526 [Default:CheckIn](INFO): Running loop #75
2018-03-10T17:54:46.526Z,1520704486.526 [Default:CheckIn] Running Loop=75
2018-03-10T17:54:46.526Z,1520704486.526 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-03-10T17:54:46.526Z,1520704486.526 [Default:CheckIn:Read_GPS] Running Loop=1
2018-03-10T17:54:46.878Z,1520704486.878 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:54:52.218Z,1520704492.218 [NAL9602](INFO): Powering up
2018-03-10T17:54:52.235Z,1520704492.235 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:54:52.384Z,1520704492.384 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:54:52.773Z,1520704492.773 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:54:53.181Z,1520704493.181 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:54:53.575Z,1520704493.575 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:54:53.977Z,1520704493.977 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:54:54.396Z,1520704494.396 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:54:54.765Z,1520704494.765 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:54:55.168Z,1520704495.168 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:54:55.580Z,1520704495.580 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:54:55.968Z,1520704495.968 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:54:56.379Z,1520704496.379 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:54:56.772Z,1520704496.772 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:54:57.176Z,1520704497.176 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:54:57.565Z,1520704497.565 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:54:57.965Z,1520704497.965 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:54:58.365Z,1520704498.365 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:54:58.765Z,1520704498.765 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:54:59.167Z,1520704499.167 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:54:59.577Z,1520704499.577 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:54:59.966Z,1520704499.966 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:55:00.370Z,1520704500.370 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:55:00.787Z,1520704500.787 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:55:01.174Z,1520704501.174 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:55:01.576Z,1520704501.576 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:55:02.565Z,1520704502.565 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:55:05.340Z,1520704505.340 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:55:05.472Z,1520704505.472 [NAL9602](INFO): NAL9602 initialized
2018-03-10T17:55:05.489Z,1520704505.489 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:55:05.860Z,1520704505.860 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:55:06.224Z,1520704506.224 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-03-10T17:55:06.224Z,1520704506.224 [NAL9602] Data Fault, FailCount= 1
2018-03-10T17:55:06.224Z,1520704506.224 [NAL9602](ERROR): Data Fault
2018-03-10T17:55:06.265Z,1520704506.265 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:55:06.321Z,1520704506.321 [CBIT](ERROR): Data Fault in component: NAL9602
2018-03-10T17:55:06.624Z,1520704506.624 [NAL9602](INFO): Powering down
2018-03-10T17:55:06.655Z,1520704506.655 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:55:07.046Z,1520704507.046 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:55:07.447Z,1520704507.447 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:55:07.548Z,1520704507.548 [CBIT](INFO): Clearing failed state for component NAL9602
2018-03-10T17:55:07.548Z,1520704507.548 [NAL9602] No Fault, FailCount= 1
2018-03-10T17:55:07.841Z,1520704507.841 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:55:08.267Z,1520704508.267 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:55:08.641Z,1520704508.641 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:55:09.043Z,1520704509.043 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:55:09.441Z,1520704509.441 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:55:09.841Z,1520704509.841 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:55:10.243Z,1520704510.243 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:55:10.643Z,1520704510.643 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:55:11.046Z,1520704511.046 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:55:11.442Z,1520704511.442 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:55:11.858Z,1520704511.858 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:55:12.262Z,1520704512.262 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:55:12.652Z,1520704512.652 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:55:13.052Z,1520704513.052 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:55:13.440Z,1520704513.440 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:55:13.842Z,1520704513.842 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:55:14.242Z,1520704514.242 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:55:14.640Z,1520704514.640 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:55:15.042Z,1520704515.042 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:55:15.452Z,1520704515.452 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:55:15.843Z,1520704515.843 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:55:16.246Z,1520704516.246 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:55:16.647Z,1520704516.647 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:55:17.050Z,1520704517.050 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:55:17.449Z,1520704517.449 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:55:17.850Z,1520704517.850 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:55:18.249Z,1520704518.249 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:55:18.651Z,1520704518.651 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:55:19.040Z,1520704519.040 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:55:19.447Z,1520704519.447 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:55:19.852Z,1520704519.852 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:55:20.270Z,1520704520.270 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:55:20.640Z,1520704520.640 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:55:21.042Z,1520704521.042 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:55:21.441Z,1520704521.441 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:55:21.841Z,1520704521.841 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:55:22.243Z,1520704522.243 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:55:22.675Z,1520704522.675 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:55:23.071Z,1520704523.071 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:55:23.454Z,1520704523.454 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:55:23.855Z,1520704523.855 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:55:23.876Z,1520704523.876 [BPC1](ERROR): Failed to receive battery data
2018-03-10T17:55:23.876Z,1520704523.876 [BPC1] Communications Fault, FailCount= 1
2018-03-10T17:55:23.876Z,1520704523.876 [BPC1](ERROR): Communications Fault
2018-03-10T17:55:23.950Z,1520704523.950 [CBIT](ERROR): Communications Fault in component: BPC1
2018-03-10T17:55:24.257Z,1520704524.257 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:55:24.663Z,1520704524.663 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:55:25.068Z,1520704525.068 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:55:25.207Z,1520704525.207 [CBIT](INFO): Clearing failed state for component BPC1
2018-03-10T17:55:25.207Z,1520704525.207 [BPC1] No Fault, FailCount= 1
2018-03-10T17:55:25.451Z,1520704525.451 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:55:25.851Z,1520704525.851 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:55:26.251Z,1520704526.251 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:55:26.649Z,1520704526.649 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:55:27.050Z,1520704527.050 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:55:27.450Z,1520704527.450 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:55:27.841Z,1520704527.841 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:55:28.261Z,1520704528.261 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:55:28.661Z,1520704528.661 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:55:29.041Z,1520704529.041 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:55:29.441Z,1520704529.441 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:55:29.847Z,1520704529.847 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:55:30.289Z,1520704530.289 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:55:30.657Z,1520704530.657 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:55:31.049Z,1520704531.049 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:55:31.446Z,1520704531.446 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:55:31.849Z,1520704531.849 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:55:32.241Z,1520704532.241 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:55:32.641Z,1520704532.641 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:55:33.044Z,1520704533.044 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:55:33.457Z,1520704533.457 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:55:33.850Z,1520704533.850 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:55:34.249Z,1520704534.249 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:55:34.649Z,1520704534.649 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:55:35.040Z,1520704535.040 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:55:35.441Z,1520704535.441 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:55:35.842Z,1520704535.842 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:55:36.240Z,1520704536.240 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:55:36.640Z,1520704536.640 [NAL9602](INFO): Powering up NAL9602
2018-03-10T17:55:36.670Z,1520704536.670 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:55:37.040Z,1520704537.040 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:55:37.451Z,1520704537.451 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:55:37.842Z,1520704537.842 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:55:38.253Z,1520704538.253 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:55:38.647Z,1520704538.647 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:55:39.045Z,1520704539.045 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:55:39.458Z,1520704539.458 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:55:39.860Z,1520704539.860 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:55:40.249Z,1520704540.249 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:55:40.652Z,1520704540.652 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:55:41.049Z,1520704541.049 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:55:41.451Z,1520704541.451 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:55:41.861Z,1520704541.861 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:55:42.250Z,1520704542.250 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:55:42.641Z,1520704542.641 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:55:43.040Z,1520704543.040 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:55:43.450Z,1520704543.450 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:55:43.845Z,1520704543.845 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:55:43.928Z,1520704543.928 [CBIT](DEBUG): EFC running - data check-sum false
2018-03-10T17:55:44.243Z,1520704544.243 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:55:44.650Z,1520704544.650 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:55:45.052Z,1520704545.052 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:55:45.453Z,1520704545.453 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:55:45.849Z,1520704545.849 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:55:46.263Z,1520704546.263 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:55:46.648Z,1520704546.648 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:55:47.050Z,1520704547.050 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:55:51.808Z,1520704551.808 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:55:51.927Z,1520704551.927 [NAL9602](INFO): NAL9602 initialized
2018-03-10T17:55:51.960Z,1520704551.960 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:55:52.355Z,1520704552.355 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:55:52.761Z,1520704552.761 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:55:52.785Z,1520704552.785 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T17:55:52.785Z,1520704552.785 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 6
2018-03-10T17:55:52.785Z,1520704552.785 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-10T17:55:52.823Z,1520704552.823 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-10T17:55:53.178Z,1520704553.178 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:55:53.274Z,1520704553.274 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-10T17:55:53.283Z,1520704553.283 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 6
2018-03-10T17:55:53.551Z,1520704553.551 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:55:53.592Z,1520704553.592 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-10T17:55:53.592Z,1520704553.592 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-10T17:55:53.593Z,1520704553.593 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-10T17:55:53.942Z,1520704553.942 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:55:54.377Z,1520704554.377 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:55:54.751Z,1520704554.751 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:55:55.151Z,1520704555.151 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:55:55.551Z,1520704555.551 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:55:55.953Z,1520704555.953 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:55:56.341Z,1520704556.341 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:55:56.768Z,1520704556.768 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:55:57.143Z,1520704557.143 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:55:57.543Z,1520704557.543 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:55:57.949Z,1520704557.949 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:55:58.343Z,1520704558.343 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:55:58.750Z,1520704558.750 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:55:59.158Z,1520704559.158 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:55:59.552Z,1520704559.552 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:55:59.968Z,1520704559.968 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:56:00.341Z,1520704560.341 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:56:00.762Z,1520704560.762 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:56:01.152Z,1520704561.152 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:56:01.543Z,1520704561.543 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:56:01.943Z,1520704561.943 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:56:02.368Z,1520704562.368 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:56:02.741Z,1520704562.741 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:56:03.146Z,1520704563.146 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:56:03.560Z,1520704563.560 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:56:03.950Z,1520704563.950 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:56:04.351Z,1520704564.351 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:56:04.752Z,1520704564.752 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:56:05.162Z,1520704565.162 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:56:05.551Z,1520704565.551 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:56:05.951Z,1520704565.951 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:56:06.374Z,1520704566.374 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:56:06.743Z,1520704566.743 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:56:07.141Z,1520704567.141 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:56:07.552Z,1520704567.552 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:56:07.945Z,1520704567.945 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:56:08.357Z,1520704568.357 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:56:08.749Z,1520704568.749 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:56:09.156Z,1520704569.156 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:56:09.547Z,1520704569.547 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:56:09.953Z,1520704569.953 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:56:10.357Z,1520704570.357 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:56:10.743Z,1520704570.743 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:56:11.152Z,1520704571.152 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:56:11.550Z,1520704571.550 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:56:11.952Z,1520704571.952 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:56:12.361Z,1520704572.361 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:56:12.741Z,1520704572.741 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:56:13.125Z,1520704573.125 [NAL9602](INFO): SBD MO Status=2, MOMSN=5839, MT Status=2, MTMSN=0
2018-03-10T17:56:13.126Z,1520704573.126 [NAL9602](ERROR): Failed to initiate SBD session. Error code: 2
2018-03-10T17:56:13.158Z,1520704573.158 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:56:13.562Z,1520704573.562 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:56:13.941Z,1520704573.941 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:56:14.341Z,1520704574.341 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:56:14.743Z,1520704574.743 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:56:15.142Z,1520704575.142 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:56:15.547Z,1520704575.547 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:56:15.947Z,1520704575.947 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:56:16.359Z,1520704576.359 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:56:16.745Z,1520704576.745 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:56:17.150Z,1520704577.150 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:56:17.564Z,1520704577.564 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:56:17.950Z,1520704577.950 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:56:18.350Z,1520704578.350 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:56:18.753Z,1520704578.753 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:56:19.166Z,1520704579.166 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:56:19.543Z,1520704579.543 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:56:19.941Z,1520704579.941 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:56:20.341Z,1520704580.341 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:56:20.742Z,1520704580.742 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:56:21.143Z,1520704581.143 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:56:21.554Z,1520704581.554 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:56:21.951Z,1520704581.951 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:56:22.352Z,1520704582.352 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:56:22.750Z,1520704582.750 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:56:23.152Z,1520704583.152 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:56:23.541Z,1520704583.541 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:56:23.967Z,1520704583.967 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:56:24.341Z,1520704584.341 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:56:24.741Z,1520704584.741 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:56:25.141Z,1520704585.141 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:56:25.541Z,1520704585.541 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:56:25.941Z,1520704585.941 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:56:26.325Z,1520704586.325 [NAL9602](INFO): SBD MO Status=2, MOMSN=5839, MT Status=2, MTMSN=0
2018-03-10T17:56:26.326Z,1520704586.326 [NAL9602](ERROR): Failed to initiate SBD session. Error code: 2
2018-03-10T17:56:26.343Z,1520704586.343 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:56:26.754Z,1520704586.754 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:56:27.146Z,1520704587.146 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:56:27.550Z,1520704587.550 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:56:27.951Z,1520704587.951 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:56:28.343Z,1520704588.343 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:56:28.744Z,1520704588.744 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:56:29.143Z,1520704589.143 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:56:29.541Z,1520704589.541 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:56:29.952Z,1520704589.952 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:56:30.347Z,1520704590.347 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:56:30.756Z,1520704590.756 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:56:31.154Z,1520704591.154 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:56:31.551Z,1520704591.551 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:56:31.941Z,1520704591.941 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:56:32.362Z,1520704592.362 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:56:32.741Z,1520704592.741 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:56:33.166Z,1520704593.166 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:56:33.561Z,1520704593.561 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:56:33.962Z,1520704593.962 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:56:34.354Z,1520704594.354 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:56:34.742Z,1520704594.742 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:56:35.152Z,1520704595.152 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:56:35.551Z,1520704595.551 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:56:35.949Z,1520704595.949 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:56:36.351Z,1520704596.351 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:56:36.751Z,1520704596.751 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:56:37.141Z,1520704597.141 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:56:37.541Z,1520704597.541 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:56:37.956Z,1520704597.956 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:56:38.340Z,1520704598.340 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:56:38.741Z,1520704598.741 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:56:39.143Z,1520704599.143 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:56:39.541Z,1520704599.541 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:56:39.942Z,1520704599.942 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:56:40.349Z,1520704600.349 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:56:40.747Z,1520704600.747 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:56:41.147Z,1520704601.147 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:56:41.557Z,1520704601.557 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:56:41.951Z,1520704601.951 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:56:42.359Z,1520704602.359 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:56:42.761Z,1520704602.761 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:56:43.151Z,1520704603.151 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:56:43.551Z,1520704603.551 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:56:43.951Z,1520704603.951 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:56:44.351Z,1520704604.351 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:56:44.753Z,1520704604.753 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:56:45.141Z,1520704605.141 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:56:45.561Z,1520704605.561 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:56:45.962Z,1520704605.962 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:56:46.343Z,1520704606.343 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:56:46.768Z,1520704606.768 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:56:47.182Z,1520704607.182 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:56:52.491Z,1520704612.491 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:56:52.670Z,1520704612.670 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:56:53.061Z,1520704613.061 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:56:53.448Z,1520704613.448 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:56:53.859Z,1520704613.859 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:56:54.254Z,1520704614.254 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:56:54.655Z,1520704614.655 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:56:55.067Z,1520704615.067 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:56:55.457Z,1520704615.457 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:56:55.861Z,1520704615.861 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:56:56.247Z,1520704616.247 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:56:56.645Z,1520704616.645 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:56:57.046Z,1520704617.046 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:56:57.445Z,1520704617.445 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:56:57.876Z,1520704617.876 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:56:58.249Z,1520704618.249 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:56:58.655Z,1520704618.655 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:56:59.055Z,1520704619.055 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:56:59.454Z,1520704619.454 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:56:59.865Z,1520704619.865 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:57:00.262Z,1520704620.262 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:57:00.670Z,1520704620.670 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:57:01.045Z,1520704621.045 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:57:01.446Z,1520704621.446 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:57:01.846Z,1520704621.846 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:57:02.245Z,1520704622.245 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:57:02.646Z,1520704622.646 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:57:03.048Z,1520704623.048 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:57:03.475Z,1520704623.475 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:57:03.869Z,1520704623.869 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:57:04.258Z,1520704624.258 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:57:04.645Z,1520704624.645 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:57:05.061Z,1520704625.061 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:57:05.455Z,1520704625.455 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:57:05.863Z,1520704625.863 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:57:06.261Z,1520704626.261 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:57:06.664Z,1520704626.664 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:57:07.058Z,1520704627.058 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:57:07.485Z,1520704627.485 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:57:07.899Z,1520704627.899 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:57:08.284Z,1520704628.284 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:57:08.698Z,1520704628.698 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:57:09.087Z,1520704629.087 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:57:09.473Z,1520704629.473 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:57:09.898Z,1520704629.898 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:57:10.258Z,1520704630.258 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:57:10.665Z,1520704630.665 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:57:11.070Z,1520704631.070 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:57:11.459Z,1520704631.459 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:57:11.856Z,1520704631.856 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:57:12.266Z,1520704632.266 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:57:12.646Z,1520704632.646 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:57:13.052Z,1520704633.052 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:57:13.455Z,1520704633.455 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:57:13.858Z,1520704633.858 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:57:14.258Z,1520704634.258 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:57:14.647Z,1520704634.647 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:57:15.047Z,1520704635.047 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:57:15.472Z,1520704635.472 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:57:15.849Z,1520704635.849 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:57:16.260Z,1520704636.260 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:57:16.656Z,1520704636.656 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:57:17.058Z,1520704637.058 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:57:17.454Z,1520704637.454 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:57:17.872Z,1520704637.872 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:57:18.268Z,1520704638.268 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:57:18.667Z,1520704638.667 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:57:19.051Z,1520704639.051 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:57:19.455Z,1520704639.455 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:57:19.856Z,1520704639.856 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:57:20.256Z,1520704640.256 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:57:20.667Z,1520704640.667 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:57:21.065Z,1520704641.065 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:57:21.445Z,1520704641.445 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:57:21.847Z,1520704641.847 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:57:22.258Z,1520704642.258 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:57:22.645Z,1520704642.645 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:57:23.053Z,1520704643.053 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:57:23.454Z,1520704643.454 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:57:23.853Z,1520704643.853 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:57:24.256Z,1520704644.256 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:57:24.671Z,1520704644.671 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:57:25.047Z,1520704645.047 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:57:25.464Z,1520704645.464 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:57:25.858Z,1520704645.858 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:57:26.269Z,1520704646.269 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:57:26.668Z,1520704646.668 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:57:27.051Z,1520704647.051 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:57:27.452Z,1520704647.452 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:57:27.853Z,1520704647.853 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:57:28.254Z,1520704648.254 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:57:28.654Z,1520704648.654 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:57:29.053Z,1520704649.053 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:57:29.457Z,1520704649.457 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:57:29.854Z,1520704649.854 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:57:30.257Z,1520704650.257 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:57:30.686Z,1520704650.686 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:57:31.056Z,1520704651.056 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:57:31.456Z,1520704651.456 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:57:31.861Z,1520704651.861 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:57:32.251Z,1520704652.251 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:57:32.651Z,1520704652.651 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:57:33.054Z,1520704653.054 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:57:33.456Z,1520704653.456 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:57:33.856Z,1520704653.856 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:57:34.245Z,1520704654.245 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:57:34.645Z,1520704654.645 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:57:35.060Z,1520704655.060 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:57:35.471Z,1520704655.471 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:57:35.867Z,1520704655.867 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:57:36.277Z,1520704656.277 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:57:36.659Z,1520704656.659 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:57:37.056Z,1520704657.056 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:57:37.455Z,1520704657.455 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:57:37.861Z,1520704657.861 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:57:38.264Z,1520704658.264 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:57:38.662Z,1520704658.662 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:57:39.054Z,1520704659.054 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:57:39.455Z,1520704659.455 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:57:39.855Z,1520704659.855 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:57:40.255Z,1520704660.255 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:57:40.666Z,1520704660.666 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:57:41.076Z,1520704661.076 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:57:41.470Z,1520704661.470 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:57:41.866Z,1520704661.866 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:57:42.253Z,1520704662.253 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:57:42.665Z,1520704662.665 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:57:43.047Z,1520704663.047 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:57:43.457Z,1520704663.457 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:57:43.855Z,1520704663.855 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:57:44.251Z,1520704664.251 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:57:44.665Z,1520704664.665 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:57:45.045Z,1520704665.045 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:57:45.450Z,1520704665.450 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:57:45.861Z,1520704665.861 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:57:46.266Z,1520704666.266 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:57:46.682Z,1520704666.682 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:57:47.064Z,1520704667.064 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:57:47.458Z,1520704667.458 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:57:52.710Z,1520704672.710 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:57:52.877Z,1520704672.877 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:57:53.291Z,1520704673.291 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:57:53.678Z,1520704673.678 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:57:54.073Z,1520704674.073 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:57:54.482Z,1520704674.482 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:57:54.866Z,1520704674.866 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:57:55.273Z,1520704675.273 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:57:55.661Z,1520704675.661 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:57:56.057Z,1520704676.057 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:57:56.459Z,1520704676.459 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:57:56.858Z,1520704676.858 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:57:57.267Z,1520704677.267 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:57:57.673Z,1520704677.673 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:57:58.068Z,1520704678.068 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:57:58.475Z,1520704678.475 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:57:58.870Z,1520704678.870 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:57:59.266Z,1520704679.266 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:57:59.667Z,1520704679.667 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:58:00.062Z,1520704680.062 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:58:00.459Z,1520704680.459 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:58:00.866Z,1520704680.866 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:58:01.257Z,1520704681.257 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:58:01.657Z,1520704681.657 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:58:02.057Z,1520704682.057 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:58:02.459Z,1520704682.459 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:58:02.876Z,1520704682.876 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:58:03.275Z,1520704683.275 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:58:03.675Z,1520704683.675 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:58:04.088Z,1520704684.088 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:58:04.458Z,1520704684.458 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:58:04.880Z,1520704684.880 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:58:05.280Z,1520704685.280 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:58:05.667Z,1520704685.667 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:58:06.057Z,1520704686.057 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:58:06.458Z,1520704686.458 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:58:06.865Z,1520704686.865 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:58:07.273Z,1520704687.273 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:58:07.672Z,1520704687.672 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:58:08.072Z,1520704688.072 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:58:08.472Z,1520704688.472 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:58:08.878Z,1520704688.878 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:58:09.276Z,1520704689.276 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:58:09.688Z,1520704689.688 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:58:10.090Z,1520704690.090 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:58:10.461Z,1520704690.461 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:58:10.863Z,1520704690.863 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:58:11.267Z,1520704691.267 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:58:11.667Z,1520704691.667 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:58:12.066Z,1520704692.066 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:58:12.469Z,1520704692.469 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:58:12.865Z,1520704692.865 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:58:13.300Z,1520704693.300 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:58:13.668Z,1520704693.668 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:58:14.058Z,1520704694.058 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:58:14.468Z,1520704694.468 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:58:14.866Z,1520704694.866 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:58:15.265Z,1520704695.265 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:58:15.665Z,1520704695.665 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:58:16.066Z,1520704696.066 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:58:16.466Z,1520704696.466 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:58:16.866Z,1520704696.866 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:58:17.292Z,1520704697.292 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:58:17.680Z,1520704697.680 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:58:18.067Z,1520704698.067 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:58:18.467Z,1520704698.467 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:58:18.867Z,1520704698.867 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:58:19.265Z,1520704699.265 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:58:19.667Z,1520704699.667 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:58:20.065Z,1520704700.065 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:58:20.467Z,1520704700.467 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:58:20.867Z,1520704700.867 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:58:21.289Z,1520704701.289 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:58:21.658Z,1520704701.658 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:58:22.061Z,1520704702.061 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:58:22.458Z,1520704702.458 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:58:22.857Z,1520704702.857 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:58:23.258Z,1520704703.258 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:58:23.657Z,1520704703.657 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:58:24.066Z,1520704704.066 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:58:24.470Z,1520704704.470 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:58:24.872Z,1520704704.872 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:58:25.273Z,1520704705.273 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:58:25.666Z,1520704705.666 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:58:26.078Z,1520704706.078 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:58:26.481Z,1520704706.481 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:58:26.857Z,1520704706.857 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:58:27.263Z,1520704707.263 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:58:27.669Z,1520704707.669 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:58:28.065Z,1520704708.065 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:58:28.468Z,1520704708.468 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:58:28.857Z,1520704708.857 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:58:29.274Z,1520704709.274 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:58:29.657Z,1520704709.657 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:58:30.061Z,1520704710.061 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:58:30.472Z,1520704710.472 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:58:30.880Z,1520704710.880 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:58:31.257Z,1520704711.257 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:58:31.664Z,1520704711.664 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:58:32.058Z,1520704712.058 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:58:32.461Z,1520704712.461 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:58:32.867Z,1520704712.867 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:58:33.265Z,1520704713.265 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:58:33.674Z,1520704713.674 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:58:34.067Z,1520704714.067 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:58:34.465Z,1520704714.465 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:58:34.865Z,1520704714.865 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:58:35.257Z,1520704715.257 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:58:35.666Z,1520704715.666 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:58:36.068Z,1520704716.068 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:58:36.473Z,1520704716.473 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:58:36.875Z,1520704716.875 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:58:37.265Z,1520704717.265 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:58:37.666Z,1520704717.666 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:58:38.065Z,1520704718.065 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:58:38.469Z,1520704718.469 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:58:38.882Z,1520704718.882 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:58:39.284Z,1520704719.284 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:58:39.665Z,1520704719.665 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:58:40.066Z,1520704720.066 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:58:40.465Z,1520704720.465 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:58:40.875Z,1520704720.875 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:58:41.264Z,1520704721.264 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:58:41.657Z,1520704721.657 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:58:42.057Z,1520704722.057 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:58:42.477Z,1520704722.477 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:58:42.892Z,1520704722.892 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:58:43.280Z,1520704723.280 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:58:43.680Z,1520704723.680 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:58:44.063Z,1520704724.063 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:58:44.467Z,1520704724.467 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:58:44.867Z,1520704724.867 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:58:45.273Z,1520704725.273 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:58:45.667Z,1520704725.667 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:58:46.066Z,1520704726.066 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:58:46.468Z,1520704726.468 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:58:46.857Z,1520704726.857 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:58:47.259Z,1520704727.259 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:58:47.684Z,1520704727.684 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:58:52.773Z,1520704732.773 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:58:52.918Z,1520704732.918 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:58:53.326Z,1520704733.326 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:58:53.704Z,1520704733.704 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:58:53.745Z,1520704733.745 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T17:58:53.745Z,1520704733.745 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 7
2018-03-10T17:58:53.745Z,1520704733.745 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-10T17:58:53.759Z,1520704733.759 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-10T17:58:54.109Z,1520704734.109 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:58:54.174Z,1520704734.174 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-10T17:58:54.174Z,1520704734.174 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 7
2018-03-10T17:58:54.514Z,1520704734.514 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:58:54.605Z,1520704734.605 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-10T17:58:54.606Z,1520704734.606 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-10T17:58:54.606Z,1520704734.606 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-10T17:58:54.912Z,1520704734.912 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:58:55.310Z,1520704735.310 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:58:55.728Z,1520704735.728 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:58:56.097Z,1520704736.097 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:58:56.520Z,1520704736.520 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:58:56.897Z,1520704736.897 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:58:57.321Z,1520704737.321 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:58:57.738Z,1520704737.738 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:58:58.114Z,1520704738.114 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:58:58.501Z,1520704738.501 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:58:58.898Z,1520704738.898 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:58:59.309Z,1520704739.309 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:58:59.698Z,1520704739.698 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:59:00.115Z,1520704740.115 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:59:00.516Z,1520704740.516 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:59:00.899Z,1520704740.899 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:59:01.324Z,1520704741.324 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:59:01.697Z,1520704741.697 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:59:02.109Z,1520704742.109 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:59:02.507Z,1520704742.507 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:59:02.905Z,1520704742.905 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:59:03.309Z,1520704743.309 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:59:03.700Z,1520704743.700 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:59:04.124Z,1520704744.124 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:59:04.525Z,1520704744.525 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:59:04.899Z,1520704744.899 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:59:05.308Z,1520704745.308 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:59:05.715Z,1520704745.715 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:59:06.106Z,1520704746.106 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:59:06.512Z,1520704746.512 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:59:06.897Z,1520704746.897 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:59:07.299Z,1520704747.299 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:59:07.704Z,1520704747.704 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:59:08.112Z,1520704748.112 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:59:08.497Z,1520704748.497 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:59:08.898Z,1520704748.898 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:59:09.323Z,1520704749.323 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:59:09.708Z,1520704749.708 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:59:10.112Z,1520704750.112 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:59:10.505Z,1520704750.505 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:59:10.924Z,1520704750.924 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:59:11.305Z,1520704751.305 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:59:11.706Z,1520704751.706 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:59:12.108Z,1520704752.108 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:59:12.524Z,1520704752.524 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:59:12.899Z,1520704752.899 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:59:13.301Z,1520704753.301 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:59:13.720Z,1520704753.720 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:59:14.120Z,1520704754.120 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:59:14.505Z,1520704754.505 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:59:14.907Z,1520704754.907 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:59:15.311Z,1520704755.311 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:59:15.698Z,1520704755.698 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:59:16.102Z,1520704756.102 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:59:16.508Z,1520704756.508 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:59:16.910Z,1520704756.910 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:59:17.328Z,1520704757.328 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:59:17.713Z,1520704757.713 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:59:18.097Z,1520704758.097 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:59:18.507Z,1520704758.507 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:59:18.903Z,1520704758.903 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:59:19.297Z,1520704759.297 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:59:19.718Z,1520704759.718 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:59:20.124Z,1520704760.124 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:59:20.497Z,1520704760.497 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:59:20.899Z,1520704760.899 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:59:21.299Z,1520704761.299 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:59:21.704Z,1520704761.704 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:59:22.104Z,1520704762.104 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:59:22.515Z,1520704762.515 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:59:22.914Z,1520704762.914 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:59:23.320Z,1520704763.320 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:59:23.719Z,1520704763.719 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:59:24.103Z,1520704764.103 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:59:24.513Z,1520704764.513 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:59:24.910Z,1520704764.910 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:59:25.319Z,1520704765.319 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:59:25.706Z,1520704765.706 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:59:26.108Z,1520704766.108 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:59:26.510Z,1520704766.510 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:59:26.929Z,1520704766.929 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:59:27.298Z,1520704767.298 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:59:27.702Z,1520704767.702 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:59:28.109Z,1520704768.109 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:59:28.511Z,1520704768.511 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:59:28.897Z,1520704768.897 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:59:29.297Z,1520704769.297 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:59:29.709Z,1520704769.709 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:59:30.112Z,1520704770.112 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:59:30.505Z,1520704770.505 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:59:30.907Z,1520704770.907 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:59:31.324Z,1520704771.324 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:59:31.697Z,1520704771.697 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:59:32.099Z,1520704772.099 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:59:32.506Z,1520704772.506 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:59:32.906Z,1520704772.906 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:59:33.302Z,1520704773.302 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:59:33.710Z,1520704773.710 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:59:34.099Z,1520704774.099 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:59:34.501Z,1520704774.501 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:59:34.881Z,1520704774.881 [NAL9602](INFO): SBD MO Status=2, MOMSN=5839, MT Status=2, MTMSN=0
2018-03-10T17:59:34.882Z,1520704774.882 [NAL9602](ERROR): Failed to initiate SBD session. Error code: 2
2018-03-10T17:59:34.901Z,1520704774.901 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:59:35.321Z,1520704775.321 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:59:35.713Z,1520704775.713 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:59:36.107Z,1520704776.107 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:59:36.501Z,1520704776.501 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:59:36.897Z,1520704776.897 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:59:37.297Z,1520704777.297 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:59:37.699Z,1520704777.699 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:59:38.106Z,1520704778.106 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:59:38.498Z,1520704778.498 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:59:38.917Z,1520704778.917 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:59:39.309Z,1520704779.309 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:59:39.716Z,1520704779.716 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:59:40.120Z,1520704780.120 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:59:40.533Z,1520704780.533 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:59:40.906Z,1520704780.906 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:59:41.308Z,1520704781.308 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:59:41.697Z,1520704781.697 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:59:42.097Z,1520704782.097 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:59:42.498Z,1520704782.498 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:59:42.915Z,1520704782.915 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:59:43.301Z,1520704783.301 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:59:43.697Z,1520704783.697 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:59:44.141Z,1520704784.141 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:59:44.506Z,1520704784.506 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:59:44.907Z,1520704784.907 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:59:45.298Z,1520704785.298 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:59:45.724Z,1520704785.724 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:59:46.099Z,1520704786.099 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:59:46.502Z,1520704786.502 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:59:46.540Z,1520704786.540 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-03-10T17:54:46.5Z
2018-03-10T17:59:46.540Z,1520704786.540 [Default:CheckIn:Read_GPS] Stopped
2018-03-10T17:59:46.540Z,1520704786.540 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-03-10T17:59:46.905Z,1520704786.905 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:59:47.654Z,1520704787.654 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:59:47.817Z,1520704787.817 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:59:48.221Z,1520704788.221 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:59:54.121Z,1520704794.121 [NAL9602](INFO): SBD MO Status=2, MOMSN=5839, MT Status=2, MTMSN=0
2018-03-10T17:59:54.121Z,1520704794.121 [NAL9602](ERROR): Failed to initiate SBD session. Error code: 2
2018-03-10T17:59:54.144Z,1520704794.144 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:59:54.326Z,1520704794.326 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:59:54.700Z,1520704794.700 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20180310T051512/Courier0300.lzma
2018-03-10T17:59:54.722Z,1520704794.722 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:59:55.117Z,1520704795.117 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:59:55.498Z,1520704795.498 [DataOverHttps](INFO): Moved sent file to Logs/20180310T051512/Courier0300.lzma.bak
2018-03-10T17:59:55.498Z,1520704795.498 [DataOverHttps](INFO): SBD MOMSN=8006859
2018-03-10T17:59:55.523Z,1520704795.523 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:59:56.430Z,1520704796.430 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:59:56.549Z,1520704796.549 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T17:59:56.934Z,1520704796.934 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:00:02.030Z,1520704802.030 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:00:02.225Z,1520704802.225 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:00:02.609Z,1520704802.609 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:00:03.034Z,1520704803.034 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:00:03.422Z,1520704803.422 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:00:03.802Z,1520704803.802 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:00:08.274Z,1520704808.274 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:00:08.425Z,1520704808.425 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:00:08.748Z,1520704808.748 [DataOverHttps](INFO): Sending 245 bytes from file Logs/20180310T051512/Express0301.lzma
2018-03-10T18:00:08.769Z,1520704808.769 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:00:09.180Z,1520704809.180 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:00:09.546Z,1520704809.546 [DataOverHttps](INFO): Moved sent file to Logs/20180310T051512/Express0301.lzma.bak
2018-03-10T18:00:09.546Z,1520704809.546 [DataOverHttps](INFO): SBD MOMSN=8006861
2018-03-10T18:00:09.601Z,1520704809.601 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:00:10.396Z,1520704810.396 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:00:10.418Z,1520704810.418 [Default:CheckIn:Read_Iridium] Stopped
2018-03-10T18:00:10.418Z,1520704810.418 [Default:CheckIn:C.Wait] Running Loop=1
2018-03-10T18:00:10.418Z,1520704810.418 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-03-10T18:00:10.520Z,1520704810.520 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:00:10.871Z,1520704810.871 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:00:15.722Z,1520704815.722 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:00:15.848Z,1520704815.848 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:00:16.254Z,1520704816.254 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:00:16.650Z,1520704816.650 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:00:17.059Z,1520704817.059 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:00:17.454Z,1520704817.454 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:00:17.857Z,1520704817.857 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:00:18.247Z,1520704818.247 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:00:18.671Z,1520704818.671 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:00:19.050Z,1520704819.050 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:00:19.449Z,1520704819.449 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:00:19.881Z,1520704819.881 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:00:20.256Z,1520704820.256 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:00:20.647Z,1520704820.647 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:00:21.068Z,1520704821.068 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:00:21.447Z,1520704821.447 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:00:21.847Z,1520704821.847 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:00:22.252Z,1520704822.252 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:00:22.646Z,1520704822.646 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:00:23.045Z,1520704823.045 [NAL9602](INFO): SBD MO Status=2, MOMSN=5839, MT Status=2, MTMSN=0
2018-03-10T18:00:23.046Z,1520704823.046 [NAL9602](ERROR): Failed to initiate SBD session. Error code: 2
2018-03-10T18:00:23.063Z,1520704823.063 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:00:23.458Z,1520704823.458 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:00:23.845Z,1520704823.845 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:00:24.248Z,1520704824.248 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:00:24.645Z,1520704824.645 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:00:25.045Z,1520704825.045 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:00:25.447Z,1520704825.447 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:00:25.846Z,1520704825.846 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:00:26.254Z,1520704826.254 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:00:26.657Z,1520704826.657 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:00:27.054Z,1520704827.054 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:00:27.463Z,1520704827.463 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:00:27.877Z,1520704827.877 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:00:28.253Z,1520704828.253 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:00:28.672Z,1520704828.672 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:00:29.064Z,1520704829.064 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:00:29.465Z,1520704829.465 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:00:29.869Z,1520704829.869 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:00:30.247Z,1520704830.247 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:00:30.645Z,1520704830.645 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:00:31.074Z,1520704831.074 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:00:31.445Z,1520704831.445 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:00:31.847Z,1520704831.847 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:00:32.257Z,1520704832.257 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:00:32.651Z,1520704832.651 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:00:33.056Z,1520704833.056 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:00:33.468Z,1520704833.468 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:00:33.856Z,1520704833.856 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:00:34.261Z,1520704834.261 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:00:34.655Z,1520704834.655 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:00:35.053Z,1520704835.053 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:00:35.456Z,1520704835.456 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:00:35.856Z,1520704835.856 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:00:36.277Z,1520704836.277 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:00:36.646Z,1520704836.646 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:00:37.047Z,1520704837.047 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:00:37.445Z,1520704837.445 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:00:37.888Z,1520704837.888 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:00:38.258Z,1520704838.258 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:00:38.682Z,1520704838.682 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:00:39.052Z,1520704839.052 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:00:39.455Z,1520704839.455 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:00:39.855Z,1520704839.855 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:00:40.255Z,1520704840.255 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:00:40.653Z,1520704840.653 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:00:41.056Z,1520704841.056 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:00:41.445Z,1520704841.445 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:00:41.872Z,1520704841.872 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:00:42.266Z,1520704842.266 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:00:42.684Z,1520704842.684 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:00:43.081Z,1520704843.081 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:00:43.458Z,1520704843.458 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:00:43.850Z,1520704843.850 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:00:44.271Z,1520704844.271 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:00:44.653Z,1520704844.653 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:00:45.060Z,1520704845.060 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:00:45.446Z,1520704845.446 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:00:45.847Z,1520704845.847 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:00:46.257Z,1520704846.257 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:00:46.657Z,1520704846.657 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:00:47.047Z,1520704847.047 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:00:47.450Z,1520704847.450 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:00:47.851Z,1520704847.851 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:00:48.251Z,1520704848.251 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:00:48.654Z,1520704848.654 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:00:49.063Z,1520704849.063 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:00:49.478Z,1520704849.478 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:00:49.851Z,1520704849.851 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:00:50.273Z,1520704850.273 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:00:50.647Z,1520704850.647 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:00:51.045Z,1520704851.045 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:00:51.447Z,1520704851.447 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:00:51.883Z,1520704851.883 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:00:52.268Z,1520704852.268 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:00:52.657Z,1520704852.657 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:00:53.045Z,1520704853.045 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:00:53.447Z,1520704853.447 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:00:53.884Z,1520704853.884 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:00:54.262Z,1520704854.262 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:00:54.638Z,1520704854.638 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session.
2018-03-10T18:00:54.655Z,1520704854.655 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:00:55.056Z,1520704855.056 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:00:55.455Z,1520704855.455 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:00:55.855Z,1520704855.855 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:00:56.254Z,1520704856.254 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:00:56.670Z,1520704856.670 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:00:57.046Z,1520704857.046 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:00:57.445Z,1520704857.445 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:00:57.848Z,1520704857.848 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:00:58.245Z,1520704858.245 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:00:58.644Z,1520704858.644 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:00:59.045Z,1520704859.045 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:00:59.446Z,1520704859.446 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:00:59.865Z,1520704859.865 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:01:00.266Z,1520704860.266 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:01:00.646Z,1520704860.646 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:01:01.046Z,1520704861.046 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:01:01.450Z,1520704861.450 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:01:01.860Z,1520704861.860 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:01:02.244Z,1520704862.244 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:01:02.657Z,1520704862.657 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:01:03.046Z,1520704863.046 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:01:03.445Z,1520704863.445 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:01:03.846Z,1520704863.846 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:01:04.246Z,1520704864.246 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:01:04.644Z,1520704864.644 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:01:05.045Z,1520704865.045 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:01:05.445Z,1520704865.445 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:01:05.847Z,1520704865.847 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:01:06.245Z,1520704866.245 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:01:06.657Z,1520704866.657 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:01:07.045Z,1520704867.045 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:01:07.450Z,1520704867.450 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:01:07.850Z,1520704867.850 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:01:08.254Z,1520704868.254 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:01:08.656Z,1520704868.656 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:01:09.053Z,1520704869.053 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:01:09.453Z,1520704869.453 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:01:09.855Z,1520704869.855 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:01:10.253Z,1520704870.253 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:01:10.646Z,1520704870.646 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:01:11.045Z,1520704871.045 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:01:15.404Z,1520704875.404 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:01:15.557Z,1520704875.557 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:01:15.934Z,1520704875.934 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:01:16.331Z,1520704876.331 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:01:16.738Z,1520704876.738 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:01:17.128Z,1520704877.128 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:01:17.521Z,1520704877.521 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:01:17.921Z,1520704877.921 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:01:18.322Z,1520704878.322 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:01:18.721Z,1520704878.721 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:01:19.121Z,1520704879.121 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:01:19.521Z,1520704879.521 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:01:19.922Z,1520704879.922 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:01:20.321Z,1520704880.321 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:01:20.733Z,1520704880.733 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:01:21.120Z,1520704881.120 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:01:21.532Z,1520704881.532 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:01:21.948Z,1520704881.948 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:01:22.330Z,1520704882.330 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:01:22.740Z,1520704882.740 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:01:23.134Z,1520704883.134 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:01:23.533Z,1520704883.533 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:01:23.942Z,1520704883.942 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:01:23.970Z,1520704883.970 [BPC1](ERROR): Failed to receive battery data
2018-03-10T18:01:23.970Z,1520704883.970 [BPC1] Communications Fault, FailCount= 1
2018-03-10T18:01:23.970Z,1520704883.970 [BPC1](ERROR): Communications Fault
2018-03-10T18:01:24.044Z,1520704884.044 [CBIT](ERROR): Communications Fault in component: BPC1
2018-03-10T18:01:24.323Z,1520704884.323 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:01:24.722Z,1520704884.722 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:01:25.105Z,1520704885.105 [NAL9602](INFO): Powering down
2018-03-10T18:01:25.125Z,1520704885.125 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:01:25.224Z,1520704885.224 [CBIT](INFO): Clearing failed state for component BPC1
2018-03-10T18:01:25.224Z,1520704885.224 [BPC1] No Fault, FailCount= 1
2018-03-10T18:01:25.530Z,1520704885.530 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:01:25.930Z,1520704885.930 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:01:26.332Z,1520704886.332 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:01:26.726Z,1520704886.726 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:01:27.132Z,1520704887.132 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:01:27.522Z,1520704887.522 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:01:27.948Z,1520704887.948 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:01:28.330Z,1520704888.330 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:01:28.730Z,1520704888.730 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:01:29.129Z,1520704889.129 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:01:29.552Z,1520704889.552 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:01:29.929Z,1520704889.929 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:01:30.332Z,1520704890.332 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:01:30.721Z,1520704890.721 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:01:31.140Z,1520704891.140 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:01:31.521Z,1520704891.521 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:01:31.920Z,1520704891.920 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:01:32.333Z,1520704892.333 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:01:32.723Z,1520704892.723 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:01:33.125Z,1520704893.125 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:01:33.551Z,1520704893.551 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:01:33.921Z,1520704893.921 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:01:34.324Z,1520704894.324 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:01:34.721Z,1520704894.721 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:01:35.121Z,1520704895.121 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:01:35.522Z,1520704895.522 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:01:35.921Z,1520704895.921 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:01:36.323Z,1520704896.323 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:01:36.721Z,1520704896.721 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:01:37.123Z,1520704897.123 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:01:37.522Z,1520704897.522 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:01:37.928Z,1520704897.928 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:01:38.345Z,1520704898.345 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:01:38.735Z,1520704898.735 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:01:39.131Z,1520704899.131 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:01:39.530Z,1520704899.530 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:01:39.932Z,1520704899.932 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:01:40.330Z,1520704900.330 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:01:40.724Z,1520704900.724 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:01:41.141Z,1520704901.141 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:01:41.522Z,1520704901.522 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:01:41.922Z,1520704901.922 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:01:42.326Z,1520704902.326 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:01:42.730Z,1520704902.730 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:01:43.130Z,1520704903.130 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:01:43.535Z,1520704903.535 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:01:43.948Z,1520704903.948 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:01:44.329Z,1520704904.329 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:01:44.730Z,1520704904.730 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:01:45.120Z,1520704905.120 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:01:45.522Z,1520704905.522 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:01:45.941Z,1520704905.941 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:01:46.321Z,1520704906.321 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:01:46.737Z,1520704906.737 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:01:47.137Z,1520704907.137 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:01:47.537Z,1520704907.537 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:01:47.926Z,1520704907.926 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:01:48.331Z,1520704908.331 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:01:48.730Z,1520704908.730 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:01:49.121Z,1520704909.121 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:01:49.521Z,1520704909.521 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:01:49.920Z,1520704909.920 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:01:50.321Z,1520704910.321 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:01:50.752Z,1520704910.752 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:01:51.126Z,1520704911.126 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:01:51.530Z,1520704911.530 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:01:51.945Z,1520704911.945 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:01:52.329Z,1520704912.329 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:01:52.729Z,1520704912.729 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:01:53.134Z,1520704913.134 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:01:53.529Z,1520704913.529 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:01:53.921Z,1520704913.921 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:01:54.321Z,1520704914.321 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:01:54.721Z,1520704914.721 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:01:54.757Z,1520704914.757 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T18:01:54.757Z,1520704914.757 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 8
2018-03-10T18:01:54.757Z,1520704914.757 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-10T18:01:54.770Z,1520704914.770 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-10T18:01:55.127Z,1520704915.127 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:01:55.182Z,1520704915.182 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-10T18:01:55.182Z,1520704915.182 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 8
2018-03-10T18:01:55.537Z,1520704915.537 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:01:55.570Z,1520704915.570 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-10T18:01:55.570Z,1520704915.570 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-10T18:01:55.570Z,1520704915.570 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-10T18:01:55.930Z,1520704915.930 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:01:55.939Z,1520704915.939 [BPC1](FAULT): Failed to initialize
2018-03-10T18:01:55.939Z,1520704915.939 [BPC1] Communications Fault, FailCount= 2
2018-03-10T18:01:55.939Z,1520704915.939 [BPC1](ERROR): Communications Fault
2018-03-10T18:01:55.995Z,1520704915.995 [CBIT](ERROR): Communications Fault in component: BPC1
2018-03-10T18:01:56.323Z,1520704916.323 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:01:56.751Z,1520704916.751 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:01:57.159Z,1520704917.159 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:01:57.190Z,1520704917.190 [CBIT](INFO): Clearing failed state for component BPC1
2018-03-10T18:01:57.190Z,1520704917.190 [BPC1] No Fault, FailCount= 2
2018-03-10T18:01:57.520Z,1520704917.520 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:01:57.927Z,1520704917.927 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:01:58.330Z,1520704918.330 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:01:58.746Z,1520704918.746 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:01:59.122Z,1520704919.122 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:01:59.522Z,1520704919.522 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:01:59.933Z,1520704919.933 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:02:00.323Z,1520704920.323 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:02:00.749Z,1520704920.749 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:02:01.129Z,1520704921.129 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:02:01.537Z,1520704921.537 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:02:01.926Z,1520704921.926 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:02:02.321Z,1520704922.321 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:02:02.733Z,1520704922.733 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:02:03.131Z,1520704923.131 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:02:03.529Z,1520704923.529 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:02:03.930Z,1520704923.930 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:02:04.343Z,1520704924.343 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:02:04.737Z,1520704924.737 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:02:05.121Z,1520704925.121 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:02:05.523Z,1520704925.523 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:02:05.921Z,1520704925.921 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:02:06.323Z,1520704926.323 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:02:06.721Z,1520704926.721 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:02:07.148Z,1520704927.148 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:02:07.554Z,1520704927.554 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:02:07.926Z,1520704927.926 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:02:08.330Z,1520704928.330 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:02:08.731Z,1520704928.731 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:02:09.147Z,1520704929.147 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:02:09.529Z,1520704929.529 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:02:09.938Z,1520704929.938 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:02:10.329Z,1520704930.329 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:02:10.731Z,1520704930.731 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:02:11.133Z,1520704931.133 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:02:16.084Z,1520704936.084 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:02:16.249Z,1520704936.249 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:02:16.642Z,1520704936.642 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:02:17.037Z,1520704937.037 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:02:17.451Z,1520704937.451 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:02:17.838Z,1520704937.838 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:02:18.239Z,1520704938.239 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:02:18.645Z,1520704938.645 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:02:19.048Z,1520704939.048 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:02:19.429Z,1520704939.429 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:02:19.845Z,1520704939.845 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:02:20.238Z,1520704940.238 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:02:20.645Z,1520704940.645 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:02:21.051Z,1520704941.051 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:02:21.435Z,1520704941.435 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:02:21.839Z,1520704941.839 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:02:22.237Z,1520704942.237 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:02:22.640Z,1520704942.640 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:02:23.029Z,1520704943.029 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:02:23.429Z,1520704943.429 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:02:23.829Z,1520704943.829 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:02:24.254Z,1520704944.254 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:02:24.629Z,1520704944.629 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:02:25.029Z,1520704945.029 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:02:25.430Z,1520704945.430 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:02:25.852Z,1520704945.852 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:02:26.242Z,1520704946.242 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:02:26.629Z,1520704946.629 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:02:27.037Z,1520704947.037 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:02:27.439Z,1520704947.439 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:02:27.846Z,1520704947.846 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:02:27.855Z,1520704947.855 [BPC1](FAULT): Failed to initialize
2018-03-10T18:02:27.855Z,1520704947.855 [BPC1] Communications Fault, FailCount= 3
2018-03-10T18:02:27.855Z,1520704947.855 [BPC1](ERROR): Communications Fault
2018-03-10T18:02:27.907Z,1520704947.907 [CBIT](ERROR): Communications Fault in component: BPC1
2018-03-10T18:02:28.239Z,1520704948.239 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:02:28.629Z,1520704948.629 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:02:29.029Z,1520704949.029 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:02:29.071Z,1520704949.071 [CBIT](INFO): Clearing failed state for component BPC1
2018-03-10T18:02:29.072Z,1520704949.072 [BPC1] No Fault, FailCount= 3
2018-03-10T18:02:29.430Z,1520704949.430 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:02:29.830Z,1520704949.830 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:02:30.229Z,1520704950.229 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:02:30.630Z,1520704950.630 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:02:31.031Z,1520704951.031 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:02:31.428Z,1520704951.428 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:02:31.840Z,1520704951.840 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:02:32.240Z,1520704952.240 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:02:32.649Z,1520704952.649 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:02:33.041Z,1520704953.041 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:02:33.429Z,1520704953.429 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:02:33.829Z,1520704953.829 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:02:34.232Z,1520704954.232 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:02:34.666Z,1520704954.666 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:02:35.032Z,1520704955.032 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:02:35.431Z,1520704955.431 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:02:35.839Z,1520704955.839 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:02:36.242Z,1520704956.242 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:02:36.640Z,1520704956.640 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:02:37.029Z,1520704957.029 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:02:37.431Z,1520704957.431 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:02:37.831Z,1520704957.831 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:02:38.229Z,1520704958.229 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:02:38.630Z,1520704958.630 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:02:39.036Z,1520704959.036 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:02:39.435Z,1520704959.435 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:02:39.838Z,1520704959.838 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:02:40.238Z,1520704960.238 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:02:40.630Z,1520704960.630 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:02:41.031Z,1520704961.031 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:02:41.430Z,1520704961.430 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:02:41.840Z,1520704961.840 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:02:42.229Z,1520704962.229 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:02:42.631Z,1520704962.631 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:02:43.056Z,1520704963.056 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:02:43.437Z,1520704963.437 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:02:43.841Z,1520704963.841 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:02:44.230Z,1520704964.230 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:02:44.637Z,1520704964.637 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:02:45.039Z,1520704965.039 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:02:45.445Z,1520704965.445 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:02:45.840Z,1520704965.840 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:02:46.242Z,1520704966.242 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:02:46.639Z,1520704966.639 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:02:47.048Z,1520704967.048 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:02:47.451Z,1520704967.451 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:02:47.829Z,1520704967.829 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:02:48.229Z,1520704968.229 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:02:48.629Z,1520704968.629 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:02:49.029Z,1520704969.029 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:02:49.434Z,1520704969.434 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:02:49.838Z,1520704969.838 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:02:50.249Z,1520704970.249 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:02:50.630Z,1520704970.630 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:02:51.029Z,1520704971.029 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:02:51.435Z,1520704971.435 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:02:51.843Z,1520704971.843 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:02:52.242Z,1520704972.242 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:02:52.640Z,1520704972.640 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:02:53.055Z,1520704973.055 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:02:53.431Z,1520704973.431 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:02:53.829Z,1520704973.829 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:02:54.227Z,1520704974.227 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:02:54.630Z,1520704974.630 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:02:55.034Z,1520704975.034 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:02:55.440Z,1520704975.440 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:02:55.835Z,1520704975.835 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:02:56.239Z,1520704976.239 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:02:56.648Z,1520704976.648 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:02:57.029Z,1520704977.029 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:02:57.430Z,1520704977.430 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:02:57.830Z,1520704977.830 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:02:58.249Z,1520704978.249 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:02:58.630Z,1520704978.630 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:02:59.030Z,1520704979.030 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:02:59.430Z,1520704979.430 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:02:59.845Z,1520704979.845 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:02:59.853Z,1520704979.853 [BPC1](FAULT): Failed to initialize
2018-03-10T18:02:59.853Z,1520704979.853 [BPC1] Communications Fault, FailCount= 4
2018-03-10T18:02:59.854Z,1520704979.854 [BPC1](ERROR): Communications Fault
2018-03-10T18:02:59.948Z,1520704979.948 [CBIT](ERROR): Communications Fault in component: BPC1
2018-03-10T18:03:00.244Z,1520704980.244 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:03:00.646Z,1520704980.646 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:03:01.040Z,1520704981.040 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:03:01.120Z,1520704981.120 [CBIT](INFO): Clearing failed state for component BPC1
2018-03-10T18:03:01.120Z,1520704981.120 [BPC1] No Fault, FailCount= 4
2018-03-10T18:03:01.446Z,1520704981.446 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:03:01.839Z,1520704981.839 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:03:02.238Z,1520704982.238 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:03:02.639Z,1520704982.639 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:03:03.048Z,1520704983.048 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:03:03.428Z,1520704983.428 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:03:03.854Z,1520704983.854 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:03:04.237Z,1520704984.237 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:03:04.637Z,1520704984.637 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:03:05.029Z,1520704985.029 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:03:05.461Z,1520704985.461 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:03:05.841Z,1520704985.841 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:03:06.245Z,1520704986.245 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:03:06.641Z,1520704986.641 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:03:07.046Z,1520704987.046 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:03:07.438Z,1520704987.438 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:03:07.838Z,1520704987.838 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:03:08.237Z,1520704988.237 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:03:08.638Z,1520704988.638 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:03:09.047Z,1520704989.047 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:03:09.431Z,1520704989.431 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:03:09.859Z,1520704989.859 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:03:10.229Z,1520704990.229 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:03:10.631Z,1520704990.631 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:03:11.044Z,1520704991.044 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:03:11.439Z,1520704991.439 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:03:15.480Z,1520704995.480 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:03:15.616Z,1520704995.616 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:03:16.005Z,1520704996.005 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:03:16.413Z,1520704996.413 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:03:16.813Z,1520704996.813 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:03:17.197Z,1520704997.197 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:03:17.597Z,1520704997.597 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:03:17.997Z,1520704997.997 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:03:18.397Z,1520704998.397 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:03:18.797Z,1520704998.797 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:03:19.197Z,1520704999.197 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:03:19.597Z,1520704999.597 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:03:19.997Z,1520704999.997 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:03:20.398Z,1520705000.398 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:03:20.817Z,1520705000.817 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:03:21.226Z,1520705001.226 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:03:21.597Z,1520705001.597 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:03:22.023Z,1520705002.023 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:03:22.426Z,1520705002.426 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:03:22.828Z,1520705002.828 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:03:23.229Z,1520705003.229 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:03:23.627Z,1520705003.627 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:03:24.013Z,1520705004.013 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:03:24.427Z,1520705004.427 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:03:24.823Z,1520705004.823 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:03:25.226Z,1520705005.226 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:03:25.612Z,1520705005.612 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:03:26.003Z,1520705006.003 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:03:26.402Z,1520705006.402 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:03:26.807Z,1520705006.807 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:03:27.206Z,1520705007.206 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:03:27.603Z,1520705007.603 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:03:28.007Z,1520705008.007 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:03:28.397Z,1520705008.397 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:03:28.821Z,1520705008.821 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:03:29.205Z,1520705009.205 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:03:29.597Z,1520705009.597 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:03:29.999Z,1520705009.999 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:03:30.397Z,1520705010.397 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:03:30.800Z,1520705010.800 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:03:31.201Z,1520705011.201 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:03:31.630Z,1520705011.630 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:03:32.034Z,1520705012.034 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:03:32.423Z,1520705012.423 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:03:32.828Z,1520705012.828 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:03:33.229Z,1520705013.229 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:03:33.602Z,1520705013.602 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:03:34.006Z,1520705014.006 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:03:34.406Z,1520705014.406 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:03:34.815Z,1520705014.815 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:03:35.223Z,1520705015.223 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:03:35.615Z,1520705015.615 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:03:35.999Z,1520705015.999 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:03:36.402Z,1520705016.402 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:03:36.797Z,1520705016.797 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:03:37.197Z,1520705017.197 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:03:37.598Z,1520705017.598 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:03:37.996Z,1520705017.996 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:03:38.429Z,1520705018.429 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:03:38.809Z,1520705018.809 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:03:39.227Z,1520705019.227 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:03:39.603Z,1520705019.603 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:03:40.004Z,1520705020.004 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:03:40.403Z,1520705020.403 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:03:40.806Z,1520705020.806 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:03:41.206Z,1520705021.206 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:03:41.605Z,1520705021.605 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:03:42.005Z,1520705022.005 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:03:42.410Z,1520705022.410 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:03:42.805Z,1520705022.805 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:03:43.206Z,1520705023.206 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:03:43.617Z,1520705023.617 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:03:43.997Z,1520705023.997 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:03:44.397Z,1520705024.397 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:03:44.808Z,1520705024.808 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:03:45.197Z,1520705025.197 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:03:45.602Z,1520705025.602 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:03:46.006Z,1520705026.006 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:03:46.401Z,1520705026.401 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:03:46.807Z,1520705026.807 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:03:47.207Z,1520705027.207 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:03:47.623Z,1520705027.623 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:03:48.007Z,1520705028.007 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:03:48.408Z,1520705028.408 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:03:48.837Z,1520705028.837 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:03:49.237Z,1520705029.237 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:03:49.628Z,1520705029.628 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:03:50.028Z,1520705030.028 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:03:50.416Z,1520705030.416 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:03:50.806Z,1520705030.806 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:03:51.220Z,1520705031.220 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:03:51.606Z,1520705031.606 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:03:52.006Z,1520705032.006 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:03:52.407Z,1520705032.407 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:03:52.835Z,1520705032.835 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:03:53.197Z,1520705033.197 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:03:53.607Z,1520705033.607 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:03:54.039Z,1520705034.039 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:03:54.398Z,1520705034.398 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:03:54.836Z,1520705034.836 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:03:55.204Z,1520705035.204 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:03:55.608Z,1520705035.608 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:03:56.008Z,1520705036.008 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:03:56.422Z,1520705036.422 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:03:56.807Z,1520705036.807 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:03:57.206Z,1520705037.206 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:03:57.605Z,1520705037.605 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:03:58.005Z,1520705038.005 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:03:58.405Z,1520705038.405 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:03:58.814Z,1520705038.814 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:03:59.207Z,1520705039.207 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:03:59.597Z,1520705039.597 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:04:00.001Z,1520705040.001 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:04:00.397Z,1520705040.397 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:04:00.800Z,1520705040.800 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:04:01.206Z,1520705041.206 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:04:01.605Z,1520705041.605 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:04:02.016Z,1520705042.016 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:04:02.406Z,1520705042.406 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:04:02.810Z,1520705042.810 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:04:03.197Z,1520705043.197 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:04:03.633Z,1520705043.633 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:04:03.997Z,1520705043.997 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:04:04.398Z,1520705044.398 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:04:04.809Z,1520705044.809 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:04:05.209Z,1520705045.209 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:04:05.598Z,1520705045.598 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:04:06.014Z,1520705046.014 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:04:06.397Z,1520705046.397 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:04:06.797Z,1520705046.797 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:04:07.215Z,1520705047.215 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:04:07.597Z,1520705047.597 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:04:07.996Z,1520705047.996 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:04:08.416Z,1520705048.416 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:04:08.799Z,1520705048.799 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:04:09.198Z,1520705049.198 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:04:09.597Z,1520705049.597 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:04:10.010Z,1520705050.010 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:04:10.398Z,1520705050.398 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:04:10.827Z,1520705050.827 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:04:11.199Z,1520705051.199 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:04:11.597Z,1520705051.597 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:04:15.609Z,1520705055.609 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:04:15.763Z,1520705055.763 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:04:16.133Z,1520705056.133 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:04:16.555Z,1520705056.555 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:04:16.954Z,1520705056.954 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:04:17.330Z,1520705057.330 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:04:17.728Z,1520705057.728 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:04:18.131Z,1520705058.131 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:04:18.532Z,1520705058.532 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:04:18.961Z,1520705058.961 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:04:19.346Z,1520705059.346 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:04:19.721Z,1520705059.721 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:04:20.121Z,1520705060.121 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:04:20.524Z,1520705060.524 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:04:20.937Z,1520705060.937 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:04:21.327Z,1520705061.327 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:04:21.730Z,1520705061.730 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:04:22.131Z,1520705062.131 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:04:22.529Z,1520705062.529 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:04:22.975Z,1520705062.975 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:04:23.331Z,1520705063.331 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:04:23.721Z,1520705063.721 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:04:24.122Z,1520705064.122 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:04:24.527Z,1520705064.527 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:04:24.931Z,1520705064.931 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:04:25.341Z,1520705065.341 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:04:25.734Z,1520705065.734 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:04:26.121Z,1520705066.121 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:04:26.522Z,1520705066.522 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:04:26.937Z,1520705066.937 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:04:27.322Z,1520705067.322 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:04:27.748Z,1520705067.748 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:04:28.138Z,1520705068.138 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:04:28.531Z,1520705068.531 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:04:28.930Z,1520705068.930 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:04:29.322Z,1520705069.322 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:04:29.721Z,1520705069.721 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:04:30.160Z,1520705070.160 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:04:30.521Z,1520705070.521 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:04:30.950Z,1520705070.950 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:04:31.326Z,1520705071.326 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:04:31.731Z,1520705071.731 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:04:32.132Z,1520705072.132 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:04:32.547Z,1520705072.547 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:04:32.929Z,1520705072.929 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:04:33.330Z,1520705073.330 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:04:33.722Z,1520705073.722 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:04:34.121Z,1520705074.121 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:04:34.522Z,1520705074.522 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:04:34.927Z,1520705074.927 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:04:35.329Z,1520705075.329 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:04:35.729Z,1520705075.729 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:04:36.129Z,1520705076.129 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:04:36.532Z,1520705076.532 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:04:36.922Z,1520705076.922 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:04:37.337Z,1520705077.337 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:04:37.734Z,1520705077.734 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:04:38.131Z,1520705078.131 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:04:38.530Z,1520705078.530 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:04:38.920Z,1520705078.920 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:04:39.321Z,1520705079.321 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:04:39.737Z,1520705079.737 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:04:40.147Z,1520705080.147 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:04:40.526Z,1520705080.526 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:04:40.928Z,1520705080.928 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:04:41.329Z,1520705081.329 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:04:41.728Z,1520705081.728 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:04:42.127Z,1520705082.127 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:04:42.520Z,1520705082.520 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:04:42.921Z,1520705082.921 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:04:43.320Z,1520705083.320 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:04:43.723Z,1520705083.723 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:04:44.121Z,1520705084.121 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:04:44.521Z,1520705084.521 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:04:44.925Z,1520705084.925 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:04:45.323Z,1520705085.323 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:04:45.733Z,1520705085.733 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:04:46.125Z,1520705086.125 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:04:46.541Z,1520705086.541 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:04:46.932Z,1520705086.932 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:04:47.321Z,1520705087.321 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:04:47.721Z,1520705087.721 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:04:48.127Z,1520705088.127 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:04:48.525Z,1520705088.525 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:04:48.923Z,1520705088.923 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:04:49.323Z,1520705089.323 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:04:49.729Z,1520705089.729 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:04:50.138Z,1520705090.138 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:04:50.532Z,1520705090.532 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:04:50.929Z,1520705090.929 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:04:51.320Z,1520705091.320 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:04:51.721Z,1520705091.721 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:04:52.148Z,1520705092.148 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:04:52.549Z,1520705092.549 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:04:52.931Z,1520705092.931 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:04:53.330Z,1520705093.330 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:04:53.721Z,1520705093.721 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:04:54.121Z,1520705094.121 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:04:54.521Z,1520705094.521 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:04:54.922Z,1520705094.922 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:04:55.330Z,1520705095.330 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:04:55.721Z,1520705095.721 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:04:55.760Z,1520705095.760 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T18:04:55.760Z,1520705095.760 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 9
2018-03-10T18:04:55.760Z,1520705095.760 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-10T18:04:55.773Z,1520705095.773 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-10T18:04:56.123Z,1520705096.123 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:04:56.285Z,1520705096.285 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-10T18:04:56.285Z,1520705096.285 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 9
2018-03-10T18:04:56.529Z,1520705096.529 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:04:56.584Z,1520705096.584 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-10T18:04:56.585Z,1520705096.585 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-10T18:04:56.585Z,1520705096.585 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-10T18:04:56.930Z,1520705096.930 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:04:57.330Z,1520705097.330 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:04:57.732Z,1520705097.732 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:04:58.125Z,1520705098.125 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:04:58.521Z,1520705098.521 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:04:58.920Z,1520705098.920 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:04:59.323Z,1520705099.323 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:04:59.721Z,1520705099.721 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:05:00.132Z,1520705100.132 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:05:00.527Z,1520705100.527 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:05:00.937Z,1520705100.937 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:05:01.337Z,1520705101.337 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:05:01.743Z,1520705101.743 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:05:02.130Z,1520705102.130 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:05:02.530Z,1520705102.530 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:05:02.933Z,1520705102.933 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:05:03.321Z,1520705103.321 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:05:03.721Z,1520705103.721 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:05:04.126Z,1520705104.126 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:05:04.522Z,1520705104.522 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:05:04.921Z,1520705104.921 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:05:05.321Z,1520705105.321 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:05:05.732Z,1520705105.732 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:05:06.186Z,1520705106.186 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:05:06.548Z,1520705106.548 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:05:06.927Z,1520705106.927 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:05:07.326Z,1520705107.326 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:05:07.730Z,1520705107.730 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:05:08.134Z,1520705108.134 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:05:08.529Z,1520705108.529 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:05:08.931Z,1520705108.931 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:05:09.337Z,1520705109.337 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:05:09.727Z,1520705109.727 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:05:10.130Z,1520705110.130 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:05:10.529Z,1520705110.529 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:05:10.928Z,1520705110.928 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:05:10.988Z,1520705110.988 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-03-10T18:05:10.988Z,1520705110.988 [Default:CheckIn:C.Wait] Stopped
2018-03-10T18:05:10.988Z,1520705110.988 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-03-10T18:05:10.988Z,1520705110.988 [Default:CheckIn:D] Running Loop=1
2018-03-10T18:05:11.321Z,1520705111.321 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:05:11.425Z,1520705111.425 [Default:CheckIn:D] Stopped
2018-03-10T18:05:11.425Z,1520705111.425 [Default:CheckIn:E] Running Loop=1
2018-03-10T18:05:11.726Z,1520705111.726 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:05:11.804Z,1520705111.804 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 765.891732 min 
2018-03-10T18:05:11.804Z,1520705111.804 [Default:CheckIn:E] Stopped
2018-03-10T18:05:11.804Z,1520705111.804 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-03-10T18:05:11.804Z,1520705111.804 [Default:CheckIn] Stopped
2018-03-10T18:05:11.804Z,1520705111.804 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-03-10T18:05:11.805Z,1520705111.805 [Default:CheckIn](INFO): Running loop #76
2018-03-10T18:05:11.805Z,1520705111.805 [Default:CheckIn] Running Loop=76
2018-03-10T18:05:11.805Z,1520705111.805 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-03-10T18:05:11.805Z,1520705111.805 [Default:CheckIn:Read_GPS] Running Loop=1
2018-03-10T18:05:16.225Z,1520705116.225 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:05:16.366Z,1520705116.366 [NAL9602](INFO): Powering up
2018-03-10T18:05:16.386Z,1520705116.386 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:05:16.792Z,1520705116.792 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:05:17.171Z,1520705117.171 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:05:17.575Z,1520705117.575 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:05:17.983Z,1520705117.983 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:05:18.374Z,1520705118.374 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:05:18.776Z,1520705118.776 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:05:19.186Z,1520705119.186 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:05:19.573Z,1520705119.573 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:05:19.987Z,1520705119.987 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:05:20.376Z,1520705120.376 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:05:20.794Z,1520705120.794 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:05:21.165Z,1520705121.165 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:05:21.566Z,1520705121.566 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:05:21.965Z,1520705121.965 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:05:22.379Z,1520705122.379 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:05:22.775Z,1520705122.775 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:05:23.174Z,1520705123.174 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:05:23.573Z,1520705123.573 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:05:23.976Z,1520705123.976 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:05:24.378Z,1520705124.378 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:05:24.775Z,1520705124.775 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:05:25.177Z,1520705125.177 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:05:25.565Z,1520705125.565 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:05:25.975Z,1520705125.975 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:05:26.370Z,1520705126.370 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:05:26.783Z,1520705126.783 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:05:27.190Z,1520705127.190 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:05:27.556Z,1520705127.556 [NAL9602](INFO): NAL9602 initialized
2018-03-10T18:05:27.577Z,1520705127.577 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:05:27.983Z,1520705127.983 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:05:28.402Z,1520705128.402 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:05:28.786Z,1520705128.786 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:05:29.185Z,1520705129.185 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:05:29.577Z,1520705129.577 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:05:29.968Z,1520705129.968 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:05:30.369Z,1520705130.369 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:05:30.767Z,1520705130.767 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:05:31.181Z,1520705131.181 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:05:31.575Z,1520705131.575 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:05:31.975Z,1520705131.975 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:05:32.373Z,1520705132.373 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:05:32.773Z,1520705132.773 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:05:33.177Z,1520705133.177 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:05:33.565Z,1520705133.565 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:05:33.965Z,1520705133.965 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:05:34.370Z,1520705134.370 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:05:34.766Z,1520705134.766 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:05:35.167Z,1520705135.167 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:05:35.570Z,1520705135.570 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:05:35.975Z,1520705135.975 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:05:36.367Z,1520705136.367 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:05:36.792Z,1520705136.792 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:05:37.165Z,1520705137.165 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:05:37.565Z,1520705137.565 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:05:37.971Z,1520705137.971 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:05:38.371Z,1520705138.371 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:05:38.781Z,1520705138.781 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:05:39.175Z,1520705139.175 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:05:39.575Z,1520705139.575 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:05:39.981Z,1520705139.981 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:05:40.374Z,1520705140.374 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:05:40.773Z,1520705140.773 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:05:41.173Z,1520705141.173 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:05:41.574Z,1520705141.574 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:05:41.984Z,1520705141.984 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:05:42.373Z,1520705142.373 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:05:42.774Z,1520705142.774 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:05:43.186Z,1520705143.186 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:05:43.565Z,1520705143.565 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:05:43.991Z,1520705143.991 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:05:44.055Z,1520705144.055 [CBIT](DEBUG): EFC running - data check-sum false
2018-03-10T18:05:44.386Z,1520705144.386 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:05:44.765Z,1520705144.765 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:05:45.165Z,1520705145.165 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:05:45.565Z,1520705145.565 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:05:45.965Z,1520705145.965 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:05:46.365Z,1520705146.365 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:05:46.777Z,1520705146.777 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:05:47.165Z,1520705147.165 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:05:47.565Z,1520705147.565 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:05:47.967Z,1520705147.967 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:05:48.365Z,1520705148.365 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:05:48.766Z,1520705148.766 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:05:49.165Z,1520705149.165 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:05:49.567Z,1520705149.567 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:05:49.975Z,1520705149.975 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:05:50.374Z,1520705150.374 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:05:50.780Z,1520705150.780 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:05:51.173Z,1520705151.173 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:05:51.573Z,1520705151.573 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:05:51.996Z,1520705151.996 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:05:52.416Z,1520705152.416 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:05:52.780Z,1520705152.780 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:05:53.174Z,1520705153.174 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:05:53.594Z,1520705153.594 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:05:53.967Z,1520705153.967 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:05:54.370Z,1520705154.370 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:05:54.778Z,1520705154.778 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:05:55.178Z,1520705155.178 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:05:55.565Z,1520705155.565 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:05:55.988Z,1520705155.988 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:05:56.367Z,1520705156.367 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:05:56.766Z,1520705156.766 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:05:57.171Z,1520705157.171 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:05:57.581Z,1520705157.581 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:05:57.975Z,1520705157.975 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:05:58.377Z,1520705158.377 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:05:58.773Z,1520705158.773 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:05:59.173Z,1520705159.173 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:05:59.548Z,1520705159.548 [NAL9602](ERROR): Failed to receive proper response when querying signal strength for MT queue check.
2018-03-10T18:05:59.631Z,1520705159.631 [NAL9602](FAULT): received: 
+CSQ:0

OK39, 2, 0, 0, 0

OK
2018-03-10T18:05:59.631Z,1520705159.631 [NAL9602] Data Fault, FailCount= 2
2018-03-10T18:05:59.631Z,1520705159.631 [NAL9602](ERROR): Data Fault
2018-03-10T18:05:59.648Z,1520705159.648 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:05:59.722Z,1520705159.722 [CBIT](ERROR): Data Fault in component: NAL9602
2018-03-10T18:05:59.948Z,1520705159.948 [NAL9602](INFO): Powering down
2018-03-10T18:05:59.982Z,1520705159.982 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:06:00.367Z,1520705160.367 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:06:00.765Z,1520705160.765 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:06:00.817Z,1520705160.817 [CBIT](INFO): Clearing failed state for component NAL9602
2018-03-10T18:06:00.817Z,1520705160.817 [NAL9602] No Fault, FailCount= 2
2018-03-10T18:06:01.167Z,1520705161.167 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:06:01.571Z,1520705161.571 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:06:01.967Z,1520705161.967 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:06:02.380Z,1520705162.380 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:06:02.781Z,1520705162.781 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:06:03.173Z,1520705163.173 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:06:03.579Z,1520705163.579 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:06:03.975Z,1520705163.975 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:06:04.375Z,1520705164.375 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:06:04.776Z,1520705164.776 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:06:05.168Z,1520705165.168 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:06:05.565Z,1520705165.565 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:06:05.979Z,1520705165.979 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:06:06.365Z,1520705166.365 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:06:06.765Z,1520705166.765 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:06:07.166Z,1520705167.166 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:06:07.573Z,1520705167.573 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:06:07.973Z,1520705167.973 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:06:08.374Z,1520705168.374 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:06:08.785Z,1520705168.785 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:06:09.176Z,1520705169.176 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:06:09.564Z,1520705169.564 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:06:09.969Z,1520705169.969 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:06:10.365Z,1520705170.365 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:06:10.778Z,1520705170.778 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:06:11.166Z,1520705171.166 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:06:11.566Z,1520705171.566 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:06:11.981Z,1520705171.981 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:06:18.785Z,1520705178.785 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:06:18.938Z,1520705178.938 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:06:19.274Z,1520705179.274 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:06:19.674Z,1520705179.674 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:06:20.092Z,1520705180.092 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:06:20.465Z,1520705180.465 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:06:20.867Z,1520705180.867 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:06:21.265Z,1520705181.265 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:06:21.674Z,1520705181.674 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:06:22.073Z,1520705182.073 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:06:22.473Z,1520705182.473 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:06:22.876Z,1520705182.876 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:06:23.265Z,1520705183.265 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:06:23.665Z,1520705183.665 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:06:24.066Z,1520705184.066 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:06:24.474Z,1520705184.474 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:06:24.877Z,1520705184.877 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:06:25.275Z,1520705185.275 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:06:25.677Z,1520705185.677 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:06:26.066Z,1520705186.066 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:06:26.464Z,1520705186.464 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:06:26.866Z,1520705186.866 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:06:27.266Z,1520705187.266 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:06:27.668Z,1520705187.668 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:06:28.065Z,1520705188.065 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:06:28.469Z,1520705188.469 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:06:28.890Z,1520705188.890 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:06:29.274Z,1520705189.274 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:06:29.666Z,1520705189.666 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:06:30.064Z,1520705190.064 [NAL9602](INFO): Powering up NAL9602
2018-03-10T18:06:30.086Z,1520705190.086 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:06:30.470Z,1520705190.470 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:06:30.899Z,1520705190.899 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:06:31.265Z,1520705191.265 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:06:31.666Z,1520705191.666 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:06:32.070Z,1520705192.070 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:06:32.477Z,1520705192.477 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:06:32.872Z,1520705192.872 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:06:33.282Z,1520705193.282 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:06:33.664Z,1520705193.664 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:06:34.064Z,1520705194.064 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:06:34.465Z,1520705194.465 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:06:34.866Z,1520705194.866 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:06:35.265Z,1520705195.265 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:06:35.667Z,1520705195.667 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:06:36.070Z,1520705196.070 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:06:36.474Z,1520705196.474 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:06:36.874Z,1520705196.874 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:06:37.266Z,1520705197.266 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:06:37.684Z,1520705197.684 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:06:38.072Z,1520705198.072 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:06:38.478Z,1520705198.478 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:06:38.872Z,1520705198.872 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:06:39.266Z,1520705199.266 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:06:39.667Z,1520705199.667 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:06:40.065Z,1520705200.065 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:06:40.467Z,1520705200.467 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:06:40.876Z,1520705200.876 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:06:41.248Z,1520705201.248 [NAL9602](INFO): NAL9602 initialized
2018-03-10T18:06:41.265Z,1520705201.265 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:06:41.666Z,1520705201.666 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:06:42.056Z,1520705202.056 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-03-10T18:06:42.056Z,1520705202.056 [NAL9602] Data Fault, FailCount= 3
2018-03-10T18:06:42.056Z,1520705202.056 [NAL9602](ERROR): Data Fault
2018-03-10T18:06:42.117Z,1520705202.117 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:06:42.203Z,1520705202.203 [CBIT](ERROR): Data Fault in component: NAL9602
2018-03-10T18:06:42.448Z,1520705202.448 [NAL9602](INFO): Powering down
2018-03-10T18:06:42.481Z,1520705202.481 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:06:42.876Z,1520705202.876 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:06:43.265Z,1520705203.265 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:06:43.348Z,1520705203.348 [CBIT](INFO): Clearing failed state for component NAL9602
2018-03-10T18:06:43.348Z,1520705203.348 [NAL9602] No Fault, FailCount= 3
2018-03-10T18:06:43.670Z,1520705203.670 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:06:44.070Z,1520705204.070 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:06:44.473Z,1520705204.473 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:06:44.873Z,1520705204.873 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:06:45.265Z,1520705205.265 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:06:45.666Z,1520705205.666 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:06:46.073Z,1520705206.073 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:06:46.477Z,1520705206.477 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:06:46.903Z,1520705206.903 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:06:47.298Z,1520705207.298 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:06:47.671Z,1520705207.671 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:06:48.078Z,1520705208.078 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:06:48.487Z,1520705208.487 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:06:48.868Z,1520705208.868 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:06:49.264Z,1520705209.264 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:06:49.695Z,1520705209.695 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:06:50.066Z,1520705210.066 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:06:50.465Z,1520705210.465 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:06:50.903Z,1520705210.903 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:06:51.265Z,1520705211.265 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:06:51.666Z,1520705211.666 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:06:52.104Z,1520705212.104 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:06:52.465Z,1520705212.465 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:06:52.867Z,1520705212.867 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:06:53.293Z,1520705213.293 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:06:53.671Z,1520705213.671 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:06:54.076Z,1520705214.076 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:06:54.472Z,1520705214.472 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:06:54.884Z,1520705214.884 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:06:55.265Z,1520705215.265 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:06:55.677Z,1520705215.677 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:06:56.066Z,1520705216.066 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:06:56.473Z,1520705216.473 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:06:56.899Z,1520705216.899 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:06:57.273Z,1520705217.273 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:06:57.674Z,1520705217.674 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:06:58.066Z,1520705218.066 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:06:58.498Z,1520705218.498 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:06:58.867Z,1520705218.867 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:06:59.270Z,1520705219.270 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:06:59.678Z,1520705219.678 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:07:00.074Z,1520705220.074 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:07:00.474Z,1520705220.474 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:07:00.872Z,1520705220.872 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:07:01.275Z,1520705221.275 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:07:01.681Z,1520705221.681 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:07:02.066Z,1520705222.066 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:07:02.495Z,1520705222.495 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:07:02.866Z,1520705222.866 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:07:03.274Z,1520705223.274 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:07:03.673Z,1520705223.673 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:07:04.073Z,1520705224.073 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:07:04.465Z,1520705224.465 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:07:04.866Z,1520705224.866 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:07:05.273Z,1520705225.273 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:07:05.667Z,1520705225.667 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:07:06.087Z,1520705226.087 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:07:06.466Z,1520705226.466 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:07:06.865Z,1520705226.865 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:07:07.271Z,1520705227.271 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:07:07.702Z,1520705227.702 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:07:08.070Z,1520705228.070 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:07:08.474Z,1520705228.474 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:07:08.882Z,1520705228.882 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:07:09.275Z,1520705229.275 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:07:09.665Z,1520705229.665 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:07:10.065Z,1520705230.065 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:07:10.466Z,1520705230.466 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:07:10.884Z,1520705230.884 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:07:11.264Z,1520705231.264 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:07:11.664Z,1520705231.664 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:07:12.065Z,1520705232.065 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:07:16.825Z,1520705236.825 [NAL9602](INFO): Powering up NAL9602
2018-03-10T18:07:16.852Z,1520705236.852 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:07:16.979Z,1520705236.979 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:07:17.369Z,1520705237.369 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:07:17.764Z,1520705237.764 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:07:18.159Z,1520705238.159 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:07:18.600Z,1520705238.600 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:07:18.978Z,1520705238.978 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:07:19.346Z,1520705239.346 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:07:19.745Z,1520705239.745 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:07:20.144Z,1520705240.144 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:07:20.558Z,1520705240.558 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:07:20.950Z,1520705240.950 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:07:21.350Z,1520705241.350 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:07:21.749Z,1520705241.749 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:07:22.161Z,1520705242.161 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:07:22.550Z,1520705242.550 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:07:22.946Z,1520705242.946 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:07:23.366Z,1520705243.366 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:07:23.772Z,1520705243.772 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:07:24.156Z,1520705244.156 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:07:24.558Z,1520705244.558 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:07:24.945Z,1520705244.945 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:07:25.345Z,1520705245.345 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:07:25.747Z,1520705245.747 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:07:26.145Z,1520705246.145 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:07:26.545Z,1520705246.545 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:07:26.945Z,1520705246.945 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:07:27.390Z,1520705247.390 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:07:27.748Z,1520705247.748 [NAL9602](INFO): NAL9602 initialized
2018-03-10T18:07:27.797Z,1520705247.797 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:07:28.147Z,1520705248.147 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:07:28.580Z,1520705248.580 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:07:29.000Z,1520705249.000 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:07:29.368Z,1520705249.368 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:07:29.765Z,1520705249.765 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:07:30.164Z,1520705250.164 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:07:30.557Z,1520705250.557 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:07:30.966Z,1520705250.966 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:07:31.375Z,1520705251.375 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:07:31.745Z,1520705251.745 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:07:32.147Z,1520705252.147 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:07:32.545Z,1520705252.545 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:07:32.953Z,1520705252.953 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:07:33.392Z,1520705253.392 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:07:33.781Z,1520705253.781 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:07:34.182Z,1520705254.182 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:07:34.573Z,1520705254.573 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:07:34.976Z,1520705254.976 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:07:35.376Z,1520705255.376 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:07:35.746Z,1520705255.746 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:07:36.146Z,1520705256.146 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:07:36.546Z,1520705256.546 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:07:36.977Z,1520705256.977 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:07:37.367Z,1520705257.367 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:07:37.756Z,1520705257.756 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:07:38.167Z,1520705258.167 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:07:38.585Z,1520705258.585 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:07:38.967Z,1520705258.967 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:07:39.355Z,1520705259.355 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:07:39.745Z,1520705259.745 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:07:40.145Z,1520705260.145 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:07:40.546Z,1520705260.546 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:07:40.978Z,1520705260.978 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:07:41.376Z,1520705261.376 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:07:41.768Z,1520705261.768 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:07:42.145Z,1520705262.145 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:07:42.546Z,1520705262.546 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:07:42.949Z,1520705262.949 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:07:43.356Z,1520705263.356 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:07:43.774Z,1520705263.774 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:07:44.178Z,1520705264.178 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:07:44.563Z,1520705264.563 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:07:44.960Z,1520705264.960 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:07:45.346Z,1520705265.346 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:07:45.746Z,1520705265.746 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:07:46.161Z,1520705266.161 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:07:46.567Z,1520705266.567 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:07:46.973Z,1520705266.973 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:07:47.373Z,1520705267.373 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:07:47.756Z,1520705267.756 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:07:48.185Z,1520705268.185 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:07:48.577Z,1520705268.577 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:07:48.966Z,1520705268.966 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:07:49.345Z,1520705269.345 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:07:49.745Z,1520705269.745 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:07:50.146Z,1520705270.146 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:07:50.554Z,1520705270.554 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:07:50.969Z,1520705270.969 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:07:51.361Z,1520705271.361 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:07:51.769Z,1520705271.769 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:07:52.178Z,1520705272.178 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:07:52.547Z,1520705272.547 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:07:52.964Z,1520705272.964 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:07:53.345Z,1520705273.345 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:07:53.747Z,1520705273.747 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:07:54.159Z,1520705274.159 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:07:54.557Z,1520705274.557 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:07:54.957Z,1520705274.957 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:07:55.353Z,1520705275.353 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:07:55.800Z,1520705275.800 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:07:56.182Z,1520705276.182 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:07:56.615Z,1520705276.615 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:07:56.669Z,1520705276.669 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T18:07:56.669Z,1520705276.669 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 10
2018-03-10T18:07:56.669Z,1520705276.669 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-10T18:07:56.715Z,1520705276.715 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-10T18:07:56.984Z,1520705276.984 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:07:57.066Z,1520705277.066 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-10T18:07:57.066Z,1520705277.066 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 10
2018-03-10T18:07:57.347Z,1520705277.347 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:07:57.437Z,1520705277.437 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-10T18:07:57.437Z,1520705277.437 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-10T18:07:57.438Z,1520705277.438 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-10T18:07:57.769Z,1520705277.769 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:07:58.177Z,1520705278.177 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:07:58.561Z,1520705278.561 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:07:58.981Z,1520705278.981 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:07:59.390Z,1520705279.390 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:07:59.777Z,1520705279.777 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:08:00.167Z,1520705280.167 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:08:00.582Z,1520705280.582 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:08:00.974Z,1520705280.974 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:08:01.374Z,1520705281.374 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:08:01.769Z,1520705281.769 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:08:02.146Z,1520705282.146 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:08:02.553Z,1520705282.553 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:08:02.972Z,1520705282.972 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:08:03.396Z,1520705283.396 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:08:03.745Z,1520705283.745 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:08:04.178Z,1520705284.178 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:08:04.549Z,1520705284.549 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:08:04.947Z,1520705284.947 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:08:05.393Z,1520705285.393 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:08:05.765Z,1520705285.765 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:08:06.194Z,1520705286.194 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:08:06.578Z,1520705286.578 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:08:06.966Z,1520705286.966 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:08:07.383Z,1520705287.383 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:08:07.767Z,1520705287.767 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:08:08.145Z,1520705288.145 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:08:08.583Z,1520705288.583 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:08:08.970Z,1520705288.970 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:08:09.349Z,1520705289.349 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:08:09.745Z,1520705289.745 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:08:10.150Z,1520705290.150 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:08:10.584Z,1520705290.584 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:08:10.977Z,1520705290.977 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:08:11.381Z,1520705291.381 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:08:11.775Z,1520705291.775 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:08:12.145Z,1520705292.145 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:08:12.547Z,1520705292.547 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:08:12.945Z,1520705292.945 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:08:17.709Z,1520705297.709 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:08:17.896Z,1520705297.896 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:08:18.270Z,1520705298.270 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:08:18.709Z,1520705298.709 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:08:19.070Z,1520705299.070 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:08:19.479Z,1520705299.479 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:08:19.877Z,1520705299.877 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:08:20.287Z,1520705300.287 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:08:20.687Z,1520705300.687 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:08:21.069Z,1520705301.069 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:08:21.469Z,1520705301.469 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:08:21.869Z,1520705301.869 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:08:22.280Z,1520705302.280 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:08:22.669Z,1520705302.669 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:08:23.069Z,1520705303.069 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:08:23.481Z,1520705303.481 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:08:23.903Z,1520705303.903 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:08:24.289Z,1520705304.289 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:08:24.704Z,1520705304.704 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:08:25.091Z,1520705305.091 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:08:25.476Z,1520705305.476 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:08:25.869Z,1520705305.869 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:08:26.285Z,1520705306.285 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:08:26.672Z,1520705306.672 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:08:27.070Z,1520705307.070 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:08:27.470Z,1520705307.470 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:08:27.871Z,1520705307.871 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:08:28.279Z,1520705308.279 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:08:28.693Z,1520705308.693 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:08:29.092Z,1520705309.092 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:08:29.479Z,1520705309.479 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:08:29.892Z,1520705309.892 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:08:30.273Z,1520705310.273 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:08:30.671Z,1520705310.671 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:08:31.069Z,1520705311.069 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:08:31.470Z,1520705311.470 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:08:31.871Z,1520705311.871 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:08:32.270Z,1520705312.270 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:08:32.671Z,1520705312.671 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:08:33.085Z,1520705313.085 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:08:33.477Z,1520705313.477 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:08:33.878Z,1520705313.878 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:08:34.277Z,1520705314.277 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:08:34.681Z,1520705314.681 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:08:35.069Z,1520705315.069 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:08:35.469Z,1520705315.469 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:08:35.897Z,1520705315.897 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:08:36.281Z,1520705316.281 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:08:36.669Z,1520705316.669 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:08:37.070Z,1520705317.070 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:08:37.484Z,1520705317.484 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:08:37.880Z,1520705317.880 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:08:38.269Z,1520705318.269 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:08:38.685Z,1520705318.685 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:08:39.079Z,1520705319.079 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:08:39.478Z,1520705319.478 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:08:39.878Z,1520705319.878 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:08:40.277Z,1520705320.277 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:08:40.680Z,1520705320.680 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:08:41.076Z,1520705321.076 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:08:41.496Z,1520705321.496 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:08:41.881Z,1520705321.881 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:08:42.270Z,1520705322.270 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:08:42.675Z,1520705322.675 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:08:43.074Z,1520705323.074 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:08:43.473Z,1520705323.473 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:08:43.879Z,1520705323.879 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:08:44.277Z,1520705324.277 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:08:44.682Z,1520705324.682 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:08:45.085Z,1520705325.085 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:08:45.478Z,1520705325.478 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:08:45.869Z,1520705325.869 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:08:46.300Z,1520705326.300 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:08:46.709Z,1520705326.709 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:08:47.096Z,1520705327.096 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:08:47.469Z,1520705327.469 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:08:47.889Z,1520705327.889 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:08:48.280Z,1520705328.280 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:08:48.701Z,1520705328.701 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:08:49.069Z,1520705329.069 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:08:49.471Z,1520705329.471 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:08:49.869Z,1520705329.869 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:08:50.269Z,1520705330.269 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:08:50.671Z,1520705330.671 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:08:51.069Z,1520705331.069 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:08:51.481Z,1520705331.481 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:08:51.882Z,1520705331.882 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:08:52.271Z,1520705332.271 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:08:52.684Z,1520705332.684 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:08:53.079Z,1520705333.079 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:08:53.492Z,1520705333.492 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:08:53.877Z,1520705333.877 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:08:54.285Z,1520705334.285 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:08:54.679Z,1520705334.679 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:08:55.078Z,1520705335.078 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:08:55.497Z,1520705335.497 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:08:55.873Z,1520705335.873 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:08:56.269Z,1520705336.269 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:08:56.670Z,1520705336.670 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:08:57.070Z,1520705337.070 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:08:57.473Z,1520705337.473 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:08:57.879Z,1520705337.879 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:08:58.289Z,1520705338.289 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:08:58.669Z,1520705338.669 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:08:59.069Z,1520705339.069 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:08:59.469Z,1520705339.469 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:08:59.870Z,1520705339.870 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:09:00.302Z,1520705340.302 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:09:00.670Z,1520705340.670 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:09:01.075Z,1520705341.075 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:09:01.478Z,1520705341.478 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:09:01.878Z,1520705341.878 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:09:02.279Z,1520705342.279 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:09:02.690Z,1520705342.690 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:09:03.069Z,1520705343.069 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:09:03.490Z,1520705343.490 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:09:03.869Z,1520705343.869 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:09:04.290Z,1520705344.290 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:09:04.658Z,1520705344.658 [NAL9602](INFO): SBD MO Status=2, MOMSN=5839, MT Status=2, MTMSN=0
2018-03-10T18:09:04.658Z,1520705344.658 [NAL9602](ERROR): Failed to initiate SBD session. Error code: 2
2018-03-10T18:09:04.675Z,1520705344.675 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:09:05.080Z,1520705345.080 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:09:05.470Z,1520705345.470 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:09:05.874Z,1520705345.874 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:09:06.278Z,1520705346.278 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:09:06.677Z,1520705346.677 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:09:07.090Z,1520705347.090 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:09:07.491Z,1520705347.491 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:09:07.869Z,1520705347.869 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:09:08.269Z,1520705348.269 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:09:08.693Z,1520705348.693 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:09:09.101Z,1520705349.101 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:09:09.469Z,1520705349.469 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:09:09.880Z,1520705349.880 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:09:10.289Z,1520705350.289 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:09:10.669Z,1520705350.669 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:09:11.069Z,1520705351.069 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:09:11.471Z,1520705351.471 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:09:11.881Z,1520705351.881 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:09:12.282Z,1520705352.282 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:09:17.366Z,1520705357.366 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:09:17.507Z,1520705357.507 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:09:17.912Z,1520705357.912 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:09:18.305Z,1520705358.305 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:09:18.727Z,1520705358.727 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:09:19.124Z,1520705359.124 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:09:19.519Z,1520705359.519 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:09:19.899Z,1520705359.899 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:09:20.309Z,1520705360.309 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:09:20.716Z,1520705360.716 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:09:21.106Z,1520705361.106 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:09:21.507Z,1520705361.507 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:09:21.905Z,1520705361.905 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:09:22.316Z,1520705362.316 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:09:22.706Z,1520705362.706 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:09:23.113Z,1520705363.113 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:09:23.520Z,1520705363.520 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:09:23.897Z,1520705363.897 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:09:24.296Z,1520705364.296 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:09:24.720Z,1520705364.720 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:09:25.109Z,1520705365.109 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:09:25.498Z,1520705365.498 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:09:25.898Z,1520705365.898 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:09:26.307Z,1520705366.307 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:09:26.706Z,1520705366.706 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:09:27.105Z,1520705367.105 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:09:27.505Z,1520705367.505 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:09:27.906Z,1520705367.906 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:09:28.308Z,1520705368.308 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:09:28.697Z,1520705368.697 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:09:29.119Z,1520705369.119 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:09:29.503Z,1520705369.503 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:09:29.897Z,1520705369.897 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:09:30.299Z,1520705370.299 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:09:30.705Z,1520705370.705 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:09:31.103Z,1520705371.103 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:09:31.499Z,1520705371.499 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:09:31.922Z,1520705371.922 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:09:32.309Z,1520705372.309 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:09:32.707Z,1520705372.707 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:09:33.116Z,1520705373.116 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:09:33.524Z,1520705373.524 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:09:33.933Z,1520705373.933 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:09:34.299Z,1520705374.299 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:09:34.698Z,1520705374.698 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:09:35.103Z,1520705375.103 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:09:35.503Z,1520705375.503 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:09:35.907Z,1520705375.907 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:09:36.322Z,1520705376.322 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:09:36.709Z,1520705376.709 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:09:37.108Z,1520705377.108 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:09:37.508Z,1520705377.508 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:09:37.930Z,1520705377.930 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:09:38.307Z,1520705378.307 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:09:38.707Z,1520705378.707 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:09:39.107Z,1520705379.107 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:09:39.504Z,1520705379.504 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:09:39.915Z,1520705379.915 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:09:40.299Z,1520705380.299 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:09:40.705Z,1520705380.705 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:09:41.113Z,1520705381.113 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:09:41.506Z,1520705381.506 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:09:41.904Z,1520705381.904 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:09:42.308Z,1520705382.308 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:09:42.708Z,1520705382.708 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:09:43.108Z,1520705383.108 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:09:43.520Z,1520705383.520 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:09:43.906Z,1520705383.906 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:09:44.306Z,1520705384.306 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:09:44.703Z,1520705384.703 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:09:45.097Z,1520705385.097 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:09:45.497Z,1520705385.497 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:09:45.897Z,1520705385.897 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:09:46.297Z,1520705386.297 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:09:46.697Z,1520705386.697 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:09:47.102Z,1520705387.102 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:09:47.497Z,1520705387.497 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:09:47.897Z,1520705387.897 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:09:48.324Z,1520705388.324 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:09:48.699Z,1520705388.699 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:09:49.102Z,1520705389.102 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:09:49.506Z,1520705389.506 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:09:49.915Z,1520705389.915 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:09:50.310Z,1520705390.310 [NAL9602](INFO): SBD MO Status=2, MOMSN=5839, MT Status=2, MTMSN=0
2018-03-10T18:09:50.310Z,1520705390.310 [NAL9602](ERROR): Failed to initiate SBD session. Error code: 2
2018-03-10T18:09:50.327Z,1520705390.327 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:09:50.718Z,1520705390.718 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:09:51.097Z,1520705391.097 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:09:51.516Z,1520705391.516 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:09:51.897Z,1520705391.897 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:09:52.299Z,1520705392.299 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:09:52.698Z,1520705392.698 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:09:53.097Z,1520705393.097 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:09:53.503Z,1520705393.503 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:09:53.907Z,1520705393.907 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:09:54.307Z,1520705394.307 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:09:54.728Z,1520705394.728 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:09:55.115Z,1520705395.115 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:09:55.519Z,1520705395.519 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:09:55.906Z,1520705395.906 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:09:56.309Z,1520705396.309 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:09:56.697Z,1520705396.697 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:09:57.097Z,1520705397.097 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:09:57.499Z,1520705397.499 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:09:57.916Z,1520705397.916 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:09:58.318Z,1520705398.318 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:09:58.699Z,1520705398.699 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:09:59.097Z,1520705399.097 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:09:59.501Z,1520705399.501 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:09:59.897Z,1520705399.897 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:10:00.325Z,1520705400.325 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:10:00.701Z,1520705400.701 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:10:01.110Z,1520705401.110 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:10:01.506Z,1520705401.506 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:10:01.907Z,1520705401.907 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:10:02.306Z,1520705402.306 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:10:02.703Z,1520705402.703 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:10:03.108Z,1520705403.108 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:10:03.507Z,1520705403.507 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:10:03.908Z,1520705403.908 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:10:04.298Z,1520705404.298 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:10:04.697Z,1520705404.697 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:10:05.098Z,1520705405.098 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:10:05.499Z,1520705405.499 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:10:05.898Z,1520705405.898 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:10:06.320Z,1520705406.320 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:10:06.717Z,1520705406.717 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:10:07.103Z,1520705407.103 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:10:07.507Z,1520705407.507 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:10:07.899Z,1520705407.899 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:10:08.299Z,1520705408.299 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:10:08.750Z,1520705408.750 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:10:09.127Z,1520705409.127 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:10:09.534Z,1520705409.534 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:10:09.934Z,1520705409.934 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:10:10.326Z,1520705410.326 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:10:10.764Z,1520705410.764 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:10:11.138Z,1520705411.138 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:10:11.499Z,1520705411.499 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:10:11.900Z,1520705411.900 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:10:11.994Z,1520705411.994 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-03-10T18:05:11.8Z
2018-03-10T18:10:11.994Z,1520705411.994 [Default:CheckIn:Read_GPS] Stopped
2018-03-10T18:10:11.994Z,1520705411.994 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-03-10T18:10:12.318Z,1520705412.318 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:10:17.458Z,1520705417.458 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:10:17.608Z,1520705417.608 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:10:17.987Z,1520705417.987 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20180310T051512/Courier0304.lzma
2018-03-10T18:10:18.010Z,1520705418.010 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:10:18.393Z,1520705418.393 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:10:18.774Z,1520705418.774 [DataOverHttps](INFO): Moved sent file to Logs/20180310T051512/Courier0304.lzma.bak
2018-03-10T18:10:18.774Z,1520705418.774 [DataOverHttps](INFO): SBD MOMSN=8006935
2018-03-10T18:10:18.821Z,1520705418.821 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:10:19.662Z,1520705419.662 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:10:19.832Z,1520705419.832 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:10:24.529Z,1520705424.529 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:10:24.670Z,1520705424.670 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:10:25.042Z,1520705425.042 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:10:25.446Z,1520705425.446 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:10:25.848Z,1520705425.848 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:10:26.238Z,1520705426.238 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:10:26.639Z,1520705426.639 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:10:31.054Z,1520705431.054 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:10:31.200Z,1520705431.200 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:10:31.568Z,1520705431.568 [DataOverHttps](INFO): Sending 284 bytes from file Logs/20180310T051512/Express0305.lzma
2018-03-10T18:10:31.603Z,1520705431.603 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:10:31.996Z,1520705431.996 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:10:32.366Z,1520705432.366 [DataOverHttps](INFO): Moved sent file to Logs/20180310T051512/Express0305.lzma.bak
2018-03-10T18:10:32.366Z,1520705432.366 [DataOverHttps](INFO): SBD MOMSN=8006937
2018-03-10T18:10:32.420Z,1520705432.420 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:10:33.231Z,1520705433.231 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:10:33.264Z,1520705433.264 [Default:CheckIn:Read_Iridium] Stopped
2018-03-10T18:10:33.264Z,1520705433.264 [Default:CheckIn:C.Wait] Running Loop=1
2018-03-10T18:10:33.264Z,1520705433.264 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-03-10T18:10:33.371Z,1520705433.371 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:10:33.718Z,1520705433.718 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:10:38.102Z,1520705438.102 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:10:38.249Z,1520705438.249 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:10:38.605Z,1520705438.605 [NAL9602](INFO): SBD MO Status=2, MOMSN=5839, MT Status=2, MTMSN=0
2018-03-10T18:10:38.606Z,1520705438.606 [NAL9602](ERROR): Failed to initiate SBD session. Error code: 2
2018-03-10T18:10:38.644Z,1520705438.644 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:10:38.996Z,1520705438.996 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session.
2018-03-10T18:10:39.015Z,1520705439.015 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:10:39.420Z,1520705439.420 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:10:39.831Z,1520705439.831 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:10:40.231Z,1520705440.231 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:10:40.624Z,1520705440.624 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:10:41.025Z,1520705441.025 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:10:41.424Z,1520705441.424 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:10:41.834Z,1520705441.834 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:10:42.226Z,1520705442.226 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:10:42.624Z,1520705442.624 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:10:43.020Z,1520705443.020 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:10:43.422Z,1520705443.422 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:10:43.826Z,1520705443.826 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:10:44.224Z,1520705444.224 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:10:44.614Z,1520705444.614 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:10:45.034Z,1520705445.034 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:10:45.436Z,1520705445.436 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:10:45.843Z,1520705445.843 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:10:46.234Z,1520705446.234 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:10:46.619Z,1520705446.619 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:10:47.022Z,1520705447.022 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:10:47.425Z,1520705447.425 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:10:47.837Z,1520705447.837 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:10:48.226Z,1520705448.226 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:10:48.642Z,1520705448.642 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:10:49.016Z,1520705449.016 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:10:49.415Z,1520705449.415 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:10:49.838Z,1520705449.838 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:10:50.215Z,1520705450.215 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:10:50.615Z,1520705450.615 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:10:51.014Z,1520705451.014 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:10:51.414Z,1520705451.414 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:10:51.826Z,1520705451.826 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:10:52.228Z,1520705452.228 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:10:52.621Z,1520705452.621 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:10:53.022Z,1520705453.022 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:10:53.426Z,1520705453.426 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:10:53.826Z,1520705453.826 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:10:54.213Z,1520705454.213 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:10:54.613Z,1520705454.613 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:10:55.026Z,1520705455.026 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:10:55.414Z,1520705455.414 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:10:55.814Z,1520705455.814 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:10:56.225Z,1520705456.225 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:10:56.621Z,1520705456.621 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:10:57.047Z,1520705457.047 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:10:57.432Z,1520705457.432 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:10:57.469Z,1520705457.469 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T18:10:57.469Z,1520705457.469 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 11
2018-03-10T18:10:57.470Z,1520705457.470 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-10T18:10:57.531Z,1520705457.531 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-10T18:10:57.829Z,1520705457.829 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:10:57.876Z,1520705457.876 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-10T18:10:57.876Z,1520705457.876 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 11
2018-03-10T18:10:58.224Z,1520705458.224 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:10:58.263Z,1520705458.263 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-10T18:10:58.264Z,1520705458.264 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-10T18:10:58.264Z,1520705458.264 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-10T18:10:58.628Z,1520705458.628 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:10:59.023Z,1520705459.023 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:10:59.426Z,1520705459.426 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:10:59.825Z,1520705459.825 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:11:00.234Z,1520705460.234 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:11:00.634Z,1520705460.634 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:11:01.013Z,1520705461.013 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:11:01.436Z,1520705461.436 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:11:01.815Z,1520705461.815 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:11:02.213Z,1520705462.213 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:11:02.613Z,1520705462.613 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:11:03.017Z,1520705463.017 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:11:03.418Z,1520705463.418 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:11:03.814Z,1520705463.814 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:11:04.218Z,1520705464.218 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:11:04.625Z,1520705464.625 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:11:05.023Z,1520705465.023 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:11:05.422Z,1520705465.422 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:11:05.824Z,1520705465.824 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:11:06.224Z,1520705466.224 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:11:06.623Z,1520705466.623 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:11:07.022Z,1520705467.022 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:11:07.422Z,1520705467.422 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:11:07.814Z,1520705467.814 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:11:08.229Z,1520705468.229 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:11:08.238Z,1520705468.238 [BPC1](ERROR): Failed to receive battery data
2018-03-10T18:11:08.238Z,1520705468.238 [BPC1] Communications Fault, FailCount= 1
2018-03-10T18:11:08.238Z,1520705468.238 [BPC1](ERROR): Communications Fault
2018-03-10T18:11:08.263Z,1520705468.263 [CBIT](ERROR): Communications Fault in component: BPC1
2018-03-10T18:11:08.615Z,1520705468.615 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:11:09.013Z,1520705469.013 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:11:09.421Z,1520705469.421 [NAL9602](INFO): Powering down
2018-03-10T18:11:09.457Z,1520705469.457 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:11:09.513Z,1520705469.513 [CBIT](INFO): Clearing failed state for component BPC1
2018-03-10T18:11:09.513Z,1520705469.513 [BPC1] No Fault, FailCount= 1
2018-03-10T18:11:09.822Z,1520705469.822 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:11:10.229Z,1520705470.229 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:11:10.621Z,1520705470.621 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:11:11.022Z,1520705471.022 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:11:11.423Z,1520705471.423 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:11:11.821Z,1520705471.821 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:11:12.221Z,1520705472.221 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:11:12.635Z,1520705472.635 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:11:13.025Z,1520705473.025 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:11:13.413Z,1520705473.413 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:11:13.812Z,1520705473.812 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:11:14.233Z,1520705474.233 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:11:14.616Z,1520705474.616 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:11:15.015Z,1520705475.015 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:11:15.413Z,1520705475.413 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:11:15.819Z,1520705475.819 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:11:16.223Z,1520705476.223 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:11:16.621Z,1520705476.621 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:11:17.022Z,1520705477.022 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:11:17.423Z,1520705477.423 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:11:17.824Z,1520705477.824 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:11:18.213Z,1520705478.213 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:11:18.634Z,1520705478.634 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:11:19.015Z,1520705479.015 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:11:19.433Z,1520705479.433 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:11:19.819Z,1520705479.819 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:11:20.220Z,1520705480.220 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:11:20.627Z,1520705480.627 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:11:21.023Z,1520705481.023 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:11:21.425Z,1520705481.425 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:11:21.822Z,1520705481.822 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:11:22.228Z,1520705482.228 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:11:22.630Z,1520705482.630 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:11:23.023Z,1520705483.023 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:11:23.431Z,1520705483.431 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:11:23.816Z,1520705483.816 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:11:24.218Z,1520705484.218 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:11:24.615Z,1520705484.615 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:11:25.020Z,1520705485.020 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:11:25.425Z,1520705485.425 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:11:25.825Z,1520705485.825 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:11:26.222Z,1520705486.222 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:11:26.623Z,1520705486.623 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:11:27.026Z,1520705487.026 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:11:27.416Z,1520705487.416 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:11:27.817Z,1520705487.817 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:11:28.250Z,1520705488.250 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:11:28.643Z,1520705488.643 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:11:29.045Z,1520705489.045 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:11:29.438Z,1520705489.438 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:11:29.828Z,1520705489.828 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:11:30.229Z,1520705490.229 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:11:30.624Z,1520705490.624 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:11:31.027Z,1520705491.027 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:11:31.419Z,1520705491.419 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:11:31.831Z,1520705491.831 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:11:32.233Z,1520705492.233 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:11:32.615Z,1520705492.615 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:11:33.021Z,1520705493.021 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:11:33.426Z,1520705493.426 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:11:33.827Z,1520705493.827 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:11:37.632Z,1520705497.632 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:11:37.755Z,1520705497.755 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:11:38.134Z,1520705498.134 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:11:38.533Z,1520705498.533 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:11:38.946Z,1520705498.946 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:11:39.325Z,1520705499.325 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:11:39.725Z,1520705499.725 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:11:40.125Z,1520705500.125 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:11:40.133Z,1520705500.133 [BPC1](FAULT): Failed to initialize
2018-03-10T18:11:40.134Z,1520705500.134 [BPC1] Communications Fault, FailCount= 2
2018-03-10T18:11:40.134Z,1520705500.134 [BPC1](ERROR): Communications Fault
2018-03-10T18:11:40.248Z,1520705500.248 [CBIT](ERROR): Communications Fault in component: BPC1
2018-03-10T18:11:40.528Z,1520705500.528 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:11:40.924Z,1520705500.924 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:11:41.326Z,1520705501.326 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:11:41.415Z,1520705501.415 [CBIT](INFO): Clearing failed state for component BPC1
2018-03-10T18:11:41.415Z,1520705501.415 [BPC1] No Fault, FailCount= 2
2018-03-10T18:11:41.725Z,1520705501.725 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:11:42.125Z,1520705502.125 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:11:42.525Z,1520705502.525 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:11:42.936Z,1520705502.936 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:11:43.329Z,1520705503.329 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:11:43.725Z,1520705503.725 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:11:44.131Z,1520705504.131 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:11:44.537Z,1520705504.537 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:11:44.938Z,1520705504.938 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:11:45.334Z,1520705505.334 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:11:45.733Z,1520705505.733 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:11:46.136Z,1520705506.136 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:11:46.526Z,1520705506.526 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:11:46.926Z,1520705506.926 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:11:47.325Z,1520705507.325 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:11:47.734Z,1520705507.734 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:11:48.135Z,1520705508.135 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:11:48.530Z,1520705508.530 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:11:48.933Z,1520705508.933 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:11:49.340Z,1520705509.340 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:11:49.742Z,1520705509.742 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:11:50.136Z,1520705510.136 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:11:50.523Z,1520705510.523 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:11:50.925Z,1520705510.925 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:11:51.329Z,1520705511.329 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:11:51.732Z,1520705511.732 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:11:52.132Z,1520705512.132 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:11:52.540Z,1520705512.540 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:11:52.947Z,1520705512.947 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:11:53.340Z,1520705513.340 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:11:53.740Z,1520705513.740 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:11:54.147Z,1520705514.147 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:11:54.540Z,1520705514.540 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:11:54.942Z,1520705514.942 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:11:55.365Z,1520705515.365 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:11:55.732Z,1520705515.732 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:11:56.132Z,1520705516.132 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:11:56.536Z,1520705516.536 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:11:56.935Z,1520705516.935 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:11:57.334Z,1520705517.334 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:11:57.733Z,1520705517.733 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:11:58.133Z,1520705518.133 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:11:58.534Z,1520705518.534 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:11:58.927Z,1520705518.927 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:11:59.325Z,1520705519.325 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:11:59.745Z,1520705519.745 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:12:00.126Z,1520705520.126 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:12:00.525Z,1520705520.525 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:12:00.934Z,1520705520.934 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:12:01.333Z,1520705521.333 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:12:01.733Z,1520705521.733 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:12:02.147Z,1520705522.147 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:12:02.534Z,1520705522.534 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:12:02.927Z,1520705522.927 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:12:03.325Z,1520705523.325 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:12:03.762Z,1520705523.762 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:12:04.125Z,1520705524.125 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:12:04.525Z,1520705524.525 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:12:04.925Z,1520705524.925 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:12:05.325Z,1520705525.325 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:12:05.742Z,1520705525.742 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:12:06.143Z,1520705526.143 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:12:06.534Z,1520705526.534 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:12:06.933Z,1520705526.933 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:12:07.333Z,1520705527.333 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:12:07.741Z,1520705527.741 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:12:08.136Z,1520705528.136 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:12:08.525Z,1520705528.525 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:12:08.927Z,1520705528.927 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:12:09.325Z,1520705529.325 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:12:09.735Z,1520705529.735 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:12:10.133Z,1520705530.133 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:12:10.548Z,1520705530.548 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:12:10.947Z,1520705530.947 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:12:11.352Z,1520705531.352 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:12:11.725Z,1520705531.725 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:12:12.125Z,1520705532.125 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:12:12.134Z,1520705532.134 [BPC1](FAULT): Failed to initialize
2018-03-10T18:12:12.134Z,1520705532.134 [BPC1] Communications Fault, FailCount= 3
2018-03-10T18:12:12.134Z,1520705532.134 [BPC1](ERROR): Communications Fault
2018-03-10T18:12:12.216Z,1520705532.216 [CBIT](ERROR): Communications Fault in component: BPC1
2018-03-10T18:12:12.525Z,1520705532.525 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:12:12.927Z,1520705532.927 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:12:13.337Z,1520705533.337 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:12:13.396Z,1520705533.396 [CBIT](INFO): Clearing failed state for component BPC1
2018-03-10T18:12:13.396Z,1520705533.396 [BPC1] No Fault, FailCount= 3
2018-03-10T18:12:13.735Z,1520705533.735 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:12:14.141Z,1520705534.141 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:12:14.533Z,1520705534.533 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:12:14.933Z,1520705534.933 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:12:15.337Z,1520705535.337 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:12:15.733Z,1520705535.733 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:12:16.125Z,1520705536.125 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:12:16.525Z,1520705536.525 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:12:16.936Z,1520705536.936 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:12:17.326Z,1520705537.326 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:12:17.742Z,1520705537.742 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:12:18.123Z,1520705538.123 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:12:18.525Z,1520705538.525 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:12:18.937Z,1520705538.937 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:12:19.363Z,1520705539.363 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:12:19.733Z,1520705539.733 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:12:20.131Z,1520705540.131 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:12:20.530Z,1520705540.530 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:12:20.934Z,1520705540.934 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:12:21.338Z,1520705541.338 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:12:21.747Z,1520705541.747 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:12:22.126Z,1520705542.126 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:12:22.525Z,1520705542.525 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:12:22.925Z,1520705542.925 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:12:23.326Z,1520705543.326 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:12:23.727Z,1520705543.727 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:12:24.130Z,1520705544.130 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:12:24.530Z,1520705544.530 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:12:24.947Z,1520705544.947 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:12:25.333Z,1520705545.333 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:12:25.725Z,1520705545.725 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:12:26.136Z,1520705546.136 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:12:26.526Z,1520705546.526 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:12:26.934Z,1520705546.934 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:12:27.335Z,1520705547.335 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:12:27.737Z,1520705547.737 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:12:28.125Z,1520705548.125 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:12:28.525Z,1520705548.525 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:12:28.925Z,1520705548.925 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:12:29.326Z,1520705549.326 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:12:29.725Z,1520705549.725 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:12:30.126Z,1520705550.126 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:12:30.525Z,1520705550.525 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:12:30.940Z,1520705550.940 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:12:31.334Z,1520705551.334 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:12:31.737Z,1520705551.737 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:12:32.132Z,1520705552.132 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:12:32.546Z,1520705552.546 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:12:32.946Z,1520705552.946 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:12:33.341Z,1520705553.341 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:12:33.736Z,1520705553.736 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:12:34.128Z,1520705554.128 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:12:34.533Z,1520705554.533 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:12:34.925Z,1520705554.925 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:12:35.327Z,1520705555.327 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:12:35.738Z,1520705555.738 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:12:40.781Z,1520705560.781 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:12:40.899Z,1520705560.899 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:12:41.258Z,1520705561.258 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:12:41.656Z,1520705561.656 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:12:42.076Z,1520705562.076 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:12:42.459Z,1520705562.459 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:12:42.858Z,1520705562.858 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:12:43.271Z,1520705563.271 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:12:43.649Z,1520705563.649 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:12:44.073Z,1520705564.073 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:12:44.082Z,1520705564.082 [BPC1](FAULT): Failed to initialize
2018-03-10T18:12:44.082Z,1520705564.082 [BPC1] Communications Fault, FailCount= 4
2018-03-10T18:12:44.082Z,1520705564.082 [BPC1](ERROR): Communications Fault
2018-03-10T18:12:44.179Z,1520705564.179 [CBIT](ERROR): Communications Fault in component: BPC1
2018-03-10T18:12:44.449Z,1520705564.449 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:12:44.850Z,1520705564.850 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:12:45.248Z,1520705565.248 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:12:45.317Z,1520705565.317 [CBIT](INFO): Clearing failed state for component BPC1
2018-03-10T18:12:45.317Z,1520705565.317 [BPC1] No Fault, FailCount= 4
2018-03-10T18:12:45.654Z,1520705565.654 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:12:46.054Z,1520705566.054 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:12:46.473Z,1520705566.473 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:12:46.873Z,1520705566.873 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:12:47.257Z,1520705567.257 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:12:47.657Z,1520705567.657 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:12:48.068Z,1520705568.068 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:12:48.460Z,1520705568.460 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:12:48.848Z,1520705568.848 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:12:49.251Z,1520705569.251 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:12:49.679Z,1520705569.679 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:12:50.080Z,1520705570.080 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:12:50.449Z,1520705570.449 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:12:50.851Z,1520705570.851 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:12:51.258Z,1520705571.258 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:12:51.666Z,1520705571.666 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:12:52.057Z,1520705572.057 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:12:52.457Z,1520705572.457 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:12:52.870Z,1520705572.870 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:12:53.280Z,1520705573.280 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:12:53.676Z,1520705573.676 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:12:54.051Z,1520705574.051 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:12:54.459Z,1520705574.459 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:12:54.862Z,1520705574.862 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:12:55.254Z,1520705575.254 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:12:55.660Z,1520705575.660 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:12:56.054Z,1520705576.054 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:12:56.460Z,1520705576.460 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:12:56.848Z,1520705576.848 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:12:57.258Z,1520705577.258 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:12:57.669Z,1520705577.669 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:12:58.060Z,1520705578.060 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:12:58.453Z,1520705578.453 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:12:58.872Z,1520705578.872 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:12:59.249Z,1520705579.249 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:12:59.649Z,1520705579.649 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:13:00.054Z,1520705580.054 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:13:00.459Z,1520705580.459 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:13:00.857Z,1520705580.857 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:13:01.257Z,1520705581.257 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:13:01.657Z,1520705581.657 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:13:02.058Z,1520705582.058 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:13:02.468Z,1520705582.468 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:13:02.857Z,1520705582.857 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:13:03.272Z,1520705583.272 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:13:03.670Z,1520705583.670 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:13:04.049Z,1520705584.049 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:13:04.474Z,1520705584.474 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:13:04.863Z,1520705584.863 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:13:05.258Z,1520705585.258 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:13:05.660Z,1520705585.660 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:13:06.059Z,1520705586.059 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:13:06.469Z,1520705586.469 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:13:06.858Z,1520705586.858 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:13:07.256Z,1520705587.256 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:13:07.671Z,1520705587.671 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:13:08.049Z,1520705588.049 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:13:08.449Z,1520705588.449 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:13:08.860Z,1520705588.860 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:13:09.248Z,1520705589.248 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:13:09.692Z,1520705589.692 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:13:10.059Z,1520705590.059 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:13:10.458Z,1520705590.458 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:13:10.873Z,1520705590.873 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:13:11.258Z,1520705591.258 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:13:11.656Z,1520705591.656 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:13:12.059Z,1520705592.059 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:13:12.472Z,1520705592.472 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:13:12.858Z,1520705592.858 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:13:13.258Z,1520705593.258 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:13:13.669Z,1520705593.669 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:13:14.050Z,1520705594.050 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:13:14.451Z,1520705594.451 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:13:14.870Z,1520705594.870 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:13:15.259Z,1520705595.259 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:13:15.653Z,1520705595.653 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:13:16.058Z,1520705596.058 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:13:16.466Z,1520705596.466 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:13:16.860Z,1520705596.860 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:13:17.260Z,1520705597.260 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:13:17.650Z,1520705597.650 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:13:18.054Z,1520705598.054 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:13:18.458Z,1520705598.458 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:13:18.856Z,1520705598.856 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:13:19.257Z,1520705599.257 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:13:19.675Z,1520705599.675 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:13:20.050Z,1520705600.050 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:13:20.449Z,1520705600.449 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:13:20.851Z,1520705600.851 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:13:21.250Z,1520705601.250 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:13:21.659Z,1520705601.659 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:13:22.061Z,1520705602.061 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:13:22.459Z,1520705602.459 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:13:22.858Z,1520705602.858 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:13:23.257Z,1520705603.257 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:13:23.658Z,1520705603.658 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:13:24.072Z,1520705604.072 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:13:24.469Z,1520705604.469 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:13:24.859Z,1520705604.859 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:13:25.253Z,1520705605.253 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:13:25.653Z,1520705605.653 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:13:26.057Z,1520705606.057 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:13:26.477Z,1520705606.477 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:13:26.860Z,1520705606.860 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:13:27.253Z,1520705607.253 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:13:27.649Z,1520705607.649 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:13:28.050Z,1520705608.050 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:13:28.455Z,1520705608.455 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:13:28.858Z,1520705608.858 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:13:29.266Z,1520705609.266 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:13:29.659Z,1520705609.659 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:13:30.050Z,1520705610.050 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:13:30.458Z,1520705610.458 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:13:30.851Z,1520705610.851 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:13:31.259Z,1520705611.259 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:13:31.667Z,1520705611.667 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:13:32.057Z,1520705612.057 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:13:32.458Z,1520705612.458 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:13:32.857Z,1520705612.857 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:13:33.262Z,1520705613.262 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:13:33.657Z,1520705613.657 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:13:34.054Z,1520705614.054 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:13:34.450Z,1520705614.450 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:13:34.874Z,1520705614.874 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:13:35.250Z,1520705615.250 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:13:40.255Z,1520705620.255 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:13:40.427Z,1520705620.427 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:13:40.805Z,1520705620.805 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:13:41.208Z,1520705621.208 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:13:41.587Z,1520705621.587 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:13:42.013Z,1520705622.013 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:13:42.386Z,1520705622.386 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:13:42.794Z,1520705622.794 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:13:43.190Z,1520705623.190 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:13:43.607Z,1520705623.607 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:13:43.993Z,1520705623.993 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:13:44.393Z,1520705624.393 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:13:44.793Z,1520705624.793 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:13:45.202Z,1520705625.202 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:13:45.596Z,1520705625.596 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:13:45.986Z,1520705625.986 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:13:46.405Z,1520705626.405 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:13:46.787Z,1520705626.787 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:13:47.185Z,1520705627.185 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:13:47.585Z,1520705627.585 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:13:47.985Z,1520705627.985 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:13:48.387Z,1520705628.387 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:13:48.785Z,1520705628.785 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:13:49.186Z,1520705629.186 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:13:49.584Z,1520705629.584 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:13:49.987Z,1520705629.987 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:13:50.394Z,1520705630.394 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:13:50.794Z,1520705630.794 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:13:51.195Z,1520705631.195 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:13:51.614Z,1520705631.614 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:13:51.985Z,1520705631.985 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:13:52.412Z,1520705632.412 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:13:52.786Z,1520705632.786 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:13:53.189Z,1520705633.189 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:13:53.595Z,1520705633.595 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:13:54.049Z,1520705634.049 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:13:54.425Z,1520705634.425 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:13:54.833Z,1520705634.833 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:13:55.241Z,1520705635.241 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:13:55.627Z,1520705635.627 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:13:55.986Z,1520705635.986 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:13:56.396Z,1520705636.396 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:13:56.786Z,1520705636.786 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:13:57.187Z,1520705637.187 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:13:57.589Z,1520705637.589 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:13:57.991Z,1520705637.991 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:13:58.393Z,1520705638.393 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:13:58.413Z,1520705638.413 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T18:13:58.413Z,1520705638.413 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 12
2018-03-10T18:13:58.413Z,1520705638.413 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-10T18:13:58.447Z,1520705638.447 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-10T18:13:58.791Z,1520705638.791 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:13:58.862Z,1520705638.862 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-10T18:13:58.862Z,1520705638.862 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 12
2018-03-10T18:13:59.184Z,1520705639.184 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:13:59.215Z,1520705639.215 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-10T18:13:59.216Z,1520705639.216 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-10T18:13:59.216Z,1520705639.216 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-10T18:13:59.587Z,1520705639.587 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:13:59.990Z,1520705639.990 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:14:00.386Z,1520705640.386 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:14:00.790Z,1520705640.790 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:14:01.194Z,1520705641.194 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:14:01.603Z,1520705641.603 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:14:01.991Z,1520705641.991 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:14:02.405Z,1520705642.405 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:14:02.805Z,1520705642.805 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:14:03.186Z,1520705643.186 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:14:03.585Z,1520705643.585 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:14:03.986Z,1520705643.986 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:14:04.398Z,1520705644.398 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:14:04.799Z,1520705644.799 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:14:05.186Z,1520705645.186 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:14:05.594Z,1520705645.594 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:14:05.993Z,1520705645.993 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:14:06.397Z,1520705646.397 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:14:06.797Z,1520705646.797 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:14:07.185Z,1520705647.185 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:14:07.585Z,1520705647.585 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:14:07.985Z,1520705647.985 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:14:08.397Z,1520705648.397 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:14:08.802Z,1520705648.802 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:14:09.190Z,1520705649.190 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:14:09.596Z,1520705649.596 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:14:09.985Z,1520705649.985 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:14:10.412Z,1520705650.412 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:14:10.793Z,1520705650.793 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:14:11.200Z,1520705651.200 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:14:11.597Z,1520705651.597 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:14:12.021Z,1520705652.021 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:14:12.396Z,1520705652.396 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:14:12.794Z,1520705652.794 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:14:13.196Z,1520705653.196 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:14:13.606Z,1520705653.606 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:14:13.989Z,1520705653.989 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:14:14.404Z,1520705654.404 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:14:14.786Z,1520705654.786 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:14:15.186Z,1520705655.186 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:14:15.586Z,1520705655.586 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:14:15.984Z,1520705655.984 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:14:16.400Z,1520705656.400 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:14:16.794Z,1520705656.794 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:14:17.194Z,1520705657.194 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:14:17.593Z,1520705657.593 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:14:17.995Z,1520705657.995 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:14:18.385Z,1520705658.385 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:14:18.785Z,1520705658.785 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:14:19.185Z,1520705659.185 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:14:19.587Z,1520705659.587 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:14:19.985Z,1520705659.985 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:14:20.385Z,1520705660.385 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:14:20.785Z,1520705660.785 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:14:21.188Z,1520705661.188 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:14:21.585Z,1520705661.585 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:14:21.985Z,1520705661.985 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:14:22.386Z,1520705662.386 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:14:22.795Z,1520705662.795 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:14:23.196Z,1520705663.196 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:14:23.594Z,1520705663.594 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:14:23.996Z,1520705663.996 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:14:24.394Z,1520705664.394 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:14:24.804Z,1520705664.804 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:14:25.196Z,1520705665.196 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:14:25.585Z,1520705665.585 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:14:26.006Z,1520705666.006 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:14:26.385Z,1520705666.385 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:14:26.812Z,1520705666.812 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:14:27.197Z,1520705667.197 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:14:27.595Z,1520705667.595 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:14:27.995Z,1520705667.995 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:14:28.394Z,1520705668.394 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:14:28.794Z,1520705668.794 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:14:29.195Z,1520705669.195 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:14:29.589Z,1520705669.589 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:14:29.994Z,1520705669.994 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:14:30.385Z,1520705670.385 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:14:30.785Z,1520705670.785 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:14:31.185Z,1520705671.185 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:14:31.586Z,1520705671.586 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:14:31.985Z,1520705671.985 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:14:32.398Z,1520705672.398 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:14:32.790Z,1520705672.790 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:14:33.190Z,1520705673.190 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:14:33.595Z,1520705673.595 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:14:33.995Z,1520705673.995 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:14:34.395Z,1520705674.395 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:14:34.797Z,1520705674.797 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:14:39.715Z,1520705679.715 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:14:39.922Z,1520705679.922 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:14:40.305Z,1520705680.305 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:14:40.704Z,1520705680.704 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:14:41.105Z,1520705681.105 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:14:41.500Z,1520705681.500 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:14:41.901Z,1520705681.901 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:14:42.320Z,1520705682.320 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:14:42.710Z,1520705682.710 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:14:43.109Z,1520705683.109 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:14:43.520Z,1520705683.520 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:14:43.912Z,1520705683.912 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:14:44.324Z,1520705684.324 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:14:44.727Z,1520705684.727 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:14:45.101Z,1520705685.101 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:14:45.502Z,1520705685.502 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:14:45.901Z,1520705685.901 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:14:46.301Z,1520705686.301 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:14:46.700Z,1520705686.700 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:14:47.129Z,1520705687.129 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:14:47.506Z,1520705687.506 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:14:47.914Z,1520705687.914 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:14:48.310Z,1520705688.310 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:14:48.711Z,1520705688.711 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:14:49.113Z,1520705689.113 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:14:49.511Z,1520705689.511 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:14:49.912Z,1520705689.912 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:14:50.303Z,1520705690.303 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:14:50.703Z,1520705690.703 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:14:51.101Z,1520705691.101 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:14:51.502Z,1520705691.502 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:14:51.904Z,1520705691.904 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:14:52.329Z,1520705692.329 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:14:52.714Z,1520705692.714 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:14:53.101Z,1520705693.101 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:14:53.502Z,1520705693.502 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:14:53.901Z,1520705693.901 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:14:54.302Z,1520705694.302 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:14:54.703Z,1520705694.703 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:14:55.106Z,1520705695.106 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:14:55.510Z,1520705695.510 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:14:55.911Z,1520705695.911 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:14:56.311Z,1520705696.311 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:14:56.710Z,1520705696.710 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:14:57.110Z,1520705697.110 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:14:57.512Z,1520705697.512 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:14:57.901Z,1520705697.901 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:14:58.324Z,1520705698.324 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:14:58.726Z,1520705698.726 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:14:59.103Z,1520705699.103 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:14:59.502Z,1520705699.502 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:14:59.902Z,1520705699.902 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:15:00.310Z,1520705700.310 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:15:00.722Z,1520705700.722 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:15:01.111Z,1520705701.111 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:15:01.536Z,1520705701.536 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:15:01.918Z,1520705701.918 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:15:02.309Z,1520705702.309 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:15:02.710Z,1520705702.710 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:15:03.111Z,1520705703.111 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:15:03.501Z,1520705703.501 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:15:03.901Z,1520705703.901 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:15:04.322Z,1520705704.322 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:15:04.701Z,1520705704.701 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:15:05.102Z,1520705705.102 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:15:05.528Z,1520705705.528 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:15:05.939Z,1520705705.939 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:15:06.306Z,1520705706.306 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:15:06.709Z,1520705706.709 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:15:07.109Z,1520705707.109 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:15:07.509Z,1520705707.509 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:15:07.911Z,1520705707.911 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:15:08.309Z,1520705708.309 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:15:08.707Z,1520705708.707 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:15:09.113Z,1520705709.113 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:15:09.503Z,1520705709.503 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:15:09.905Z,1520705709.905 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:15:10.303Z,1520705710.303 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:15:10.701Z,1520705710.701 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:15:11.104Z,1520705711.104 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:15:11.525Z,1520705711.525 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:15:11.907Z,1520705711.907 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:15:12.313Z,1520705712.313 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:15:12.710Z,1520705712.710 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:15:13.110Z,1520705713.110 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:15:13.528Z,1520705713.528 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:15:13.920Z,1520705713.920 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:15:14.321Z,1520705714.321 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:15:14.700Z,1520705714.700 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:15:15.101Z,1520705715.101 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:15:15.500Z,1520705715.500 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:15:15.902Z,1520705715.902 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:15:16.301Z,1520705716.301 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:15:16.706Z,1520705716.706 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:15:17.109Z,1520705717.109 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:15:17.529Z,1520705717.529 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:15:17.913Z,1520705717.913 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:15:18.311Z,1520705718.311 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:15:18.722Z,1520705718.722 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:15:19.101Z,1520705719.101 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:15:19.501Z,1520705719.501 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:15:19.901Z,1520705719.901 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:15:20.326Z,1520705720.326 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:15:20.701Z,1520705720.701 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:15:21.101Z,1520705721.102 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:15:21.501Z,1520705721.501 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:15:21.901Z,1520705721.901 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:15:22.301Z,1520705722.301 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:15:22.702Z,1520705722.702 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:15:23.114Z,1520705723.114 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:15:23.502Z,1520705723.502 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:15:23.910Z,1520705723.910 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:15:24.311Z,1520705724.311 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:15:24.715Z,1520705724.715 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:15:25.109Z,1520705725.109 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:15:25.509Z,1520705725.509 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:15:25.908Z,1520705725.908 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:15:26.315Z,1520705726.315 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:15:26.701Z,1520705726.701 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:15:27.101Z,1520705727.101 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:15:27.513Z,1520705727.513 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:15:27.900Z,1520705727.900 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:15:28.324Z,1520705728.324 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:15:28.712Z,1520705728.712 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:15:29.135Z,1520705729.135 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:15:29.537Z,1520705729.537 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:15:29.904Z,1520705729.904 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:15:30.310Z,1520705730.310 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:15:30.708Z,1520705730.708 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:15:31.100Z,1520705731.100 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:15:31.529Z,1520705731.529 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:15:31.901Z,1520705731.901 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:15:32.302Z,1520705732.302 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:15:32.701Z,1520705732.701 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:15:33.101Z,1520705733.101 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:15:33.501Z,1520705733.501 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:15:33.538Z,1520705733.538 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-03-10T18:15:33.538Z,1520705733.538 [Default:CheckIn:C.Wait] Stopped
2018-03-10T18:15:33.538Z,1520705733.538 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-03-10T18:15:33.538Z,1520705733.538 [Default:CheckIn:D] Running Loop=1
2018-03-10T18:15:33.901Z,1520705733.901 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:15:33.949Z,1520705733.949 [Default:CheckIn:D] Stopped
2018-03-10T18:15:33.949Z,1520705733.949 [Default:CheckIn:E] Running Loop=1
2018-03-10T18:15:34.306Z,1520705734.306 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:15:34.372Z,1520705734.372 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 776.267122 min 
2018-03-10T18:15:34.372Z,1520705734.372 [Default:CheckIn:E] Stopped
2018-03-10T18:15:34.372Z,1520705734.372 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-03-10T18:15:34.372Z,1520705734.372 [Default:CheckIn] Stopped
2018-03-10T18:15:34.373Z,1520705734.373 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-03-10T18:15:34.373Z,1520705734.373 [Default:CheckIn](INFO): Running loop #77
2018-03-10T18:15:34.373Z,1520705734.373 [Default:CheckIn] Running Loop=77
2018-03-10T18:15:34.373Z,1520705734.373 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-03-10T18:15:34.373Z,1520705734.373 [Default:CheckIn:Read_GPS] Running Loop=1
2018-03-10T18:15:34.710Z,1520705734.710 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:15:35.092Z,1520705735.092 [NAL9602](INFO): Powering up
2018-03-10T18:15:35.111Z,1520705735.111 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:15:40.661Z,1520705740.661 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:15:40.837Z,1520705740.837 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:15:41.220Z,1520705741.220 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:15:44.136Z,1520705744.136 [CBIT](DEBUG): EFC running - data check-sum false
2018-03-10T18:15:46.004Z,1520705746.004 [NAL9602](INFO): NAL9602 initialized
2018-03-10T18:15:47.694Z,1520705747.694 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:15:48.023Z,1520705748.023 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:15:48.433Z,1520705748.433 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:15:48.822Z,1520705748.822 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:15:49.244Z,1520705749.244 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:15:49.641Z,1520705749.641 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:15:50.040Z,1520705750.040 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:15:50.432Z,1520705750.432 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:15:50.824Z,1520705750.824 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:15:51.228Z,1520705751.228 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:15:51.632Z,1520705751.632 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:15:52.042Z,1520705752.042 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:15:52.421Z,1520705752.421 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:15:52.821Z,1520705752.821 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:15:53.222Z,1520705753.222 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:16:53.434Z,1520705813.434 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:16:53.827Z,1520705813.827 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:16:54.235Z,1520705814.235 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:16:54.648Z,1520705814.648 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:16:55.066Z,1520705815.066 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:16:55.450Z,1520705815.450 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:16:55.856Z,1520705815.856 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:16:56.235Z,1520705816.235 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:16:56.640Z,1520705816.640 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:16:58.247Z,1520705818.247 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:16:58.627Z,1520705818.627 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:16:59.029Z,1520705819.029 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:16:59.429Z,1520705819.429 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:16:59.473Z,1520705819.473 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T18:16:59.473Z,1520705819.473 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 13
2018-03-10T18:16:59.473Z,1520705819.473 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-10T18:16:59.498Z,1520705819.498 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-10T18:16:59.848Z,1520705819.848 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:16:59.890Z,1520705819.890 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-10T18:16:59.890Z,1520705819.890 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 13
2018-03-10T18:17:00.258Z,1520705820.258 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:17:00.278Z,1520705820.278 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-10T18:17:00.278Z,1520705820.278 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-10T18:17:00.279Z,1520705820.279 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-10T18:17:00.650Z,1520705820.650 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:17:01.038Z,1520705821.038 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:17:01.438Z,1520705821.438 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:17:01.825Z,1520705821.825 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:17:02.245Z,1520705822.245 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:17:02.650Z,1520705822.650 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:17:03.064Z,1520705823.064 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:17:03.425Z,1520705823.425 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:17:03.827Z,1520705823.827 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:17:04.225Z,1520705824.225 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:17:04.642Z,1520705824.642 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:17:05.052Z,1520705825.052 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:17:05.450Z,1520705825.450 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:17:05.840Z,1520705825.840 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:17:06.254Z,1520705826.254 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:17:06.637Z,1520705826.637 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:17:07.034Z,1520705827.034 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:17:07.445Z,1520705827.445 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:17:07.828Z,1520705827.828 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:17:08.225Z,1520705828.225 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:17:08.625Z,1520705828.625 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:17:09.061Z,1520705829.061 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:17:09.455Z,1520705829.455 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:17:09.839Z,1520705829.839 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:17:10.248Z,1520705830.248 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:17:10.646Z,1520705830.646 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:17:11.048Z,1520705831.048 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:17:11.437Z,1520705831.437 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:17:11.841Z,1520705831.841 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:17:12.235Z,1520705832.235 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:17:12.639Z,1520705832.639 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:17:13.037Z,1520705833.037 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:17:13.425Z,1520705833.425 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:17:13.827Z,1520705833.827 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:17:14.245Z,1520705834.245 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:17:14.632Z,1520705834.632 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:17:15.030Z,1520705835.030 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:17:15.464Z,1520705835.464 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:17:15.857Z,1520705835.857 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:17:16.240Z,1520705836.240 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:17:16.646Z,1520705836.646 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:17:17.025Z,1520705837.025 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:17:17.437Z,1520705837.437 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:17:17.827Z,1520705837.827 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:17:18.227Z,1520705838.227 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:17:18.632Z,1520705838.632 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:17:19.041Z,1520705839.041 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:17:19.444Z,1520705839.444 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:17:19.843Z,1520705839.843 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:17:20.234Z,1520705840.234 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:17:20.648Z,1520705840.648 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:17:21.045Z,1520705841.045 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:17:21.445Z,1520705841.445 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:17:21.845Z,1520705841.845 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:17:22.228Z,1520705842.228 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:17:22.626Z,1520705842.626 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:17:23.028Z,1520705843.028 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:17:23.434Z,1520705843.434 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:17:23.837Z,1520705843.837 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:17:24.233Z,1520705844.233 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:17:24.634Z,1520705844.634 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:17:25.033Z,1520705845.033 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:17:25.438Z,1520705845.438 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:17:25.849Z,1520705845.849 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:17:26.244Z,1520705846.244 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:17:26.642Z,1520705846.642 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:17:27.056Z,1520705847.056 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:17:27.437Z,1520705847.437 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:17:27.827Z,1520705847.827 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:17:28.231Z,1520705848.231 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:17:28.644Z,1520705848.644 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:17:29.034Z,1520705849.034 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:17:29.445Z,1520705849.445 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:17:29.842Z,1520705849.842 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:17:30.235Z,1520705850.235 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:17:30.635Z,1520705850.635 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:17:31.043Z,1520705851.043 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:17:31.462Z,1520705851.462 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:17:31.867Z,1520705851.867 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:17:32.246Z,1520705852.246 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:17:32.646Z,1520705852.646 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:17:33.082Z,1520705853.082 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:17:33.483Z,1520705853.483 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:17:33.896Z,1520705853.896 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:17:34.274Z,1520705854.274 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:17:34.675Z,1520705854.675 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:17:35.085Z,1520705855.085 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:17:35.444Z,1520705855.444 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:17:35.836Z,1520705855.836 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:17:36.245Z,1520705856.245 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:17:36.649Z,1520705856.649 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:17:41.648Z,1520705861.648 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:17:41.809Z,1520705861.809 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:17:42.168Z,1520705862.168 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:17:42.575Z,1520705862.575 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:17:42.949Z,1520705862.949 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:17:43.343Z,1520705863.343 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:17:43.773Z,1520705863.773 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:17:44.172Z,1520705864.172 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:17:44.547Z,1520705864.547 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:17:44.943Z,1520705864.943 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:17:45.350Z,1520705865.350 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:17:45.750Z,1520705865.750 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:17:46.149Z,1520705866.149 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:17:46.560Z,1520705866.560 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:17:46.997Z,1520705866.997 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:17:47.400Z,1520705867.400 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:17:47.837Z,1520705867.837 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:17:48.217Z,1520705868.217 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:17:48.593Z,1520705868.593 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:17:48.999Z,1520705868.999 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:17:49.353Z,1520705869.353 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:17:49.776Z,1520705869.776 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:17:50.149Z,1520705870.149 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:19:32.232Z,1520705972.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 0.387690 seconds old.
2018-03-10T18:19:32.243Z,1520705972.243 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 0.388215 seconds old.
2018-03-10T18:19:32.245Z,1520705972.245 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 0.392705 seconds old.
2018-03-10T18:19:32.618Z,1520705972.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 0.773411 seconds old.
2018-03-10T18:19:32.625Z,1520705972.625 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 0.778039 seconds old.
2018-03-10T18:19:32.631Z,1520705972.631 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 0.774071 seconds old.
2018-03-10T18:19:33.021Z,1520705973.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 1.176240 seconds old.
2018-03-10T18:19:33.025Z,1520705973.025 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 1.178404 seconds old.
2018-03-10T18:19:33.027Z,1520705973.027 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 1.174656 seconds old.
2018-03-10T18:19:33.429Z,1520705973.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 1.584114 seconds old.
2018-03-10T18:19:33.431Z,1520705973.431 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 1.584851 seconds old.
2018-03-10T18:19:33.433Z,1520705973.433 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 1.580931 seconds old.
2018-03-10T18:20:00.315Z,1520706000.315 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T18:20:00.316Z,1520706000.316 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 14
2018-03-10T18:20:00.316Z,1520706000.316 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-10T18:20:00.353Z,1520706000.353 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-10T18:20:00.721Z,1520706000.721 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-10T18:20:00.721Z,1520706000.721 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 14
2018-03-10T18:20:01.078Z,1520706001.078 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-10T18:20:01.078Z,1520706001.078 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-10T18:20:01.079Z,1520706001.079 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-10T18:20:21.449Z,1520706021.449 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:20:21.849Z,1520706021.849 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:20:22.249Z,1520706022.249 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:20:22.661Z,1520706022.661 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:20:23.060Z,1520706023.060 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:20:23.451Z,1520706023.451 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:20:23.859Z,1520706023.859 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:20:24.261Z,1520706024.261 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:20:24.657Z,1520706024.657 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:20:25.058Z,1520706025.058 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:20:25.457Z,1520706025.457 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:20:25.857Z,1520706025.857 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:20:26.261Z,1520706026.261 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:20:26.649Z,1520706026.649 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:20:27.067Z,1520706027.067 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:20:34.713Z,1520706034.713 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-03-10T18:15:34.4Z
2018-03-10T18:20:34.713Z,1520706034.713 [Default:CheckIn:Read_GPS] Stopped
2018-03-10T18:20:34.713Z,1520706034.713 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-03-10T18:20:41.763Z,1520706041.763 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20180310T051512/Courier0308.lzma
2018-03-10T18:20:42.594Z,1520706042.594 [DataOverHttps](INFO): Moved sent file to Logs/20180310T051512/Courier0308.lzma.bak
2018-03-10T18:20:42.594Z,1520706042.594 [DataOverHttps](INFO): SBD MOMSN=8007006
2018-03-10T18:20:49.888Z,1520706049.888 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session.
2018-03-10T18:20:55.021Z,1520706055.021 [BPC1](ERROR): Failed to receive battery data
2018-03-10T18:20:55.021Z,1520706055.021 [BPC1] Communications Fault, FailCount= 1
2018-03-10T18:20:55.021Z,1520706055.021 [BPC1](ERROR): Communications Fault
2018-03-10T18:20:55.098Z,1520706055.098 [CBIT](ERROR): Communications Fault in component: BPC1
2018-03-10T18:20:55.520Z,1520706055.520 [DataOverHttps](INFO): Sending 226 bytes from file Logs/20180310T051512/Express0309.lzma
2018-03-10T18:20:55.981Z,1520706055.981 [CBIT](INFO): Clearing failed state for component BPC1
2018-03-10T18:20:55.981Z,1520706055.981 [BPC1] No Fault, FailCount= 1
2018-03-10T18:20:56.330Z,1520706056.330 [DataOverHttps](INFO): Moved sent file to Logs/20180310T051512/Express0309.lzma.bak
2018-03-10T18:20:56.330Z,1520706056.330 [DataOverHttps](INFO): SBD MOMSN=8007008
2018-03-10T18:20:57.184Z,1520706057.184 [Default:CheckIn:Read_Iridium] Stopped
2018-03-10T18:20:57.184Z,1520706057.184 [Default:CheckIn:C.Wait] Running Loop=1
2018-03-10T18:20:57.184Z,1520706057.184 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-03-10T18:21:20.540Z,1520706080.540 [NAL9602](INFO): Powering down
2018-03-10T18:21:26.602Z,1520706086.602 [BPC1](FAULT): Failed to initialize
2018-03-10T18:21:26.602Z,1520706086.602 [BPC1] Communications Fault, FailCount= 2
2018-03-10T18:21:26.602Z,1520706086.602 [BPC1](ERROR): Communications Fault
2018-03-10T18:21:26.666Z,1520706086.666 [CBIT](ERROR): Communications Fault in component: BPC1
2018-03-10T18:21:27.905Z,1520706087.905 [CBIT](INFO): Clearing failed state for component BPC1
2018-03-10T18:21:27.905Z,1520706087.905 [BPC1] No Fault, FailCount= 2
2018-03-10T18:22:01.660Z,1520706121.660 [BPC1](FAULT): Failed to initialize
2018-03-10T18:22:01.660Z,1520706121.660 [BPC1] Communications Fault, FailCount= 3
2018-03-10T18:22:01.660Z,1520706121.660 [BPC1](ERROR): Communications Fault
2018-03-10T18:22:01.708Z,1520706121.708 [CBIT](ERROR): Communications Fault in component: BPC1
2018-03-10T18:22:02.649Z,1520706122.649 [CBIT](INFO): Clearing failed state for component BPC1
2018-03-10T18:22:02.649Z,1520706122.649 [BPC1] No Fault, FailCount= 3
2018-03-10T18:22:33.350Z,1520706153.350 [BPC1](FAULT): Failed to initialize
2018-03-10T18:22:33.350Z,1520706153.350 [BPC1] Communications Fault, FailCount= 4
2018-03-10T18:22:33.350Z,1520706153.350 [BPC1](ERROR): Communications Fault
2018-03-10T18:22:33.475Z,1520706153.475 [CBIT](ERROR): Communications Fault in component: BPC1
2018-03-10T18:22:34.638Z,1520706154.638 [CBIT](INFO): Clearing failed state for component BPC1
2018-03-10T18:22:34.638Z,1520706154.638 [BPC1] No Fault, FailCount= 4
2018-03-10T18:23:02.497Z,1520706182.497 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T18:23:02.497Z,1520706182.497 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 15
2018-03-10T18:23:02.497Z,1520706182.497 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-10T18:23:02.523Z,1520706182.523 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-10T18:23:02.740Z,1520706182.740 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-10T18:23:02.740Z,1520706182.740 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 15
2018-03-10T18:23:03.081Z,1520706183.081 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-10T18:23:03.081Z,1520706183.081 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-10T18:23:03.081Z,1520706183.081 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-10T18:25:44.296Z,1520706344.296 [CBIT](DEBUG): EFC running - data check-sum false
2018-03-10T18:25:57.526Z,1520706357.526 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-03-10T18:25:57.531Z,1520706357.531 [Default:CheckIn:C.Wait] Stopped
2018-03-10T18:25:57.531Z,1520706357.531 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-03-10T18:25:57.531Z,1520706357.531 [Default:CheckIn:D] Running Loop=1
2018-03-10T18:25:57.926Z,1520706357.926 [Default:CheckIn:D] Stopped
2018-03-10T18:25:57.926Z,1520706357.926 [Default:CheckIn:E] Running Loop=1
2018-03-10T18:25:58.288Z,1520706358.288 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 786.666732 min 
2018-03-10T18:25:58.288Z,1520706358.288 [Default:CheckIn:E] Stopped
2018-03-10T18:25:58.288Z,1520706358.288 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-03-10T18:25:58.288Z,1520706358.288 [Default:CheckIn] Stopped
2018-03-10T18:25:58.288Z,1520706358.288 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-03-10T18:25:58.289Z,1520706358.289 [Default:CheckIn](INFO): Running loop #78
2018-03-10T18:25:58.289Z,1520706358.289 [Default:CheckIn] Running Loop=78
2018-03-10T18:25:58.289Z,1520706358.289 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-03-10T18:25:58.289Z,1520706358.289 [Default:CheckIn:Read_GPS] Running Loop=1
2018-03-10T18:26:02.730Z,1520706362.730 [NAL9602](INFO): Powering up
2018-03-10T18:26:03.150Z,1520706363.150 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T18:26:03.150Z,1520706363.150 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 16
2018-03-10T18:26:03.150Z,1520706363.150 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-10T18:26:03.163Z,1520706363.163 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-10T18:26:03.608Z,1520706363.608 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-10T18:26:03.608Z,1520706363.608 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 16
2018-03-10T18:26:03.973Z,1520706363.973 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-10T18:26:03.973Z,1520706363.973 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-10T18:26:03.974Z,1520706363.974 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-10T18:26:13.900Z,1520706373.900 [NAL9602](INFO): NAL9602 initialized
2018-03-10T18:26:14.700Z,1520706374.700 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-03-10T18:26:14.700Z,1520706374.700 [NAL9602] Data Fault, FailCount= 4
2018-03-10T18:26:14.701Z,1520706374.701 [NAL9602](ERROR): Data Fault
2018-03-10T18:26:14.778Z,1520706374.778 [CBIT](ERROR): Data Fault in component: NAL9602
2018-03-10T18:26:15.112Z,1520706375.112 [NAL9602](INFO): Powering down
2018-03-10T18:26:16.031Z,1520706376.031 [CBIT](INFO): Clearing failed state for component NAL9602
2018-03-10T18:26:16.031Z,1520706376.031 [NAL9602] No Fault, FailCount= 4
2018-03-10T18:26:45.516Z,1520706405.516 [NAL9602](INFO): Powering up NAL9602
2018-03-10T18:26:56.700Z,1520706416.700 [NAL9602](INFO): NAL9602 initialized
2018-03-10T18:28:37.654Z,1520706517.654 [NAL9602](INFO): SBD MO Status=2, MOMSN=5839, MT Status=2, MTMSN=0
2018-03-10T18:28:37.654Z,1520706517.654 [NAL9602](ERROR): Failed to initiate SBD session. Error code: 2
2018-03-10T18:29:04.315Z,1520706544.315 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T18:29:04.315Z,1520706544.315 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 17
2018-03-10T18:29:04.315Z,1520706544.315 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-10T18:29:04.345Z,1520706544.345 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-10T18:29:04.768Z,1520706544.768 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-10T18:29:04.768Z,1520706544.768 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 17
2018-03-10T18:29:05.104Z,1520706545.104 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-10T18:29:05.104Z,1520706545.104 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-10T18:29:05.104Z,1520706545.104 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-10T18:29:20.658Z,1520706560.658 [NAL9602](INFO): SBD MO Status=2, MOMSN=5839, MT Status=2, MTMSN=0
2018-03-10T18:29:20.658Z,1520706560.658 [NAL9602](ERROR): Failed to initiate SBD session. Error code: 2
2018-03-10T18:30:21.105Z,1520706621.105 [BPC1](ERROR): Failed to receive battery data
2018-03-10T18:30:21.105Z,1520706621.105 [BPC1] Communications Fault, FailCount= 1
2018-03-10T18:30:21.105Z,1520706621.105 [BPC1](ERROR): Communications Fault
2018-03-10T18:30:21.130Z,1520706621.130 [CBIT](ERROR): Communications Fault in component: BPC1
2018-03-10T18:30:22.331Z,1520706622.331 [CBIT](INFO): Clearing failed state for component BPC1
2018-03-10T18:30:22.331Z,1520706622.331 [BPC1] No Fault, FailCount= 1
2018-03-10T18:30:53.125Z,1520706653.125 [BPC1](FAULT): Failed to initialize
2018-03-10T18:30:53.125Z,1520706653.125 [BPC1] Communications Fault, FailCount= 2
2018-03-10T18:30:53.125Z,1520706653.125 [BPC1](ERROR): Communications Fault
2018-03-10T18:30:53.198Z,1520706653.198 [CBIT](ERROR): Communications Fault in component: BPC1
2018-03-10T18:30:54.390Z,1520706654.390 [CBIT](INFO): Clearing failed state for component BPC1
2018-03-10T18:30:54.390Z,1520706654.390 [BPC1] No Fault, FailCount= 2
2018-03-10T18:30:58.330Z,1520706658.330 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-03-10T18:25:58.3Z
2018-03-10T18:30:58.330Z,1520706658.330 [Default:CheckIn:Read_GPS] Stopped
2018-03-10T18:30:58.330Z,1520706658.330 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-03-10T18:31:04.995Z,1520706664.995 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20180310T051512/Courier0312.lzma
2018-03-10T18:31:05.794Z,1520706665.794 [DataOverHttps](INFO): Moved sent file to Logs/20180310T051512/Courier0312.lzma.bak
2018-03-10T18:31:05.794Z,1520706665.794 [DataOverHttps](INFO): SBD MOMSN=8007078
2018-03-10T18:31:21.928Z,1520706681.928 [DataOverHttps](INFO): Sending 250 bytes from file Logs/20180310T051512/Express0313.lzma
2018-03-10T18:31:22.738Z,1520706682.738 [DataOverHttps](INFO): Moved sent file to Logs/20180310T051512/Express0313.lzma.bak
2018-03-10T18:31:22.738Z,1520706682.738 [DataOverHttps](INFO): SBD MOMSN=8007080
2018-03-10T18:31:23.853Z,1520706683.853 [Default:CheckIn:Read_Iridium] Stopped
2018-03-10T18:31:23.853Z,1520706683.853 [Default:CheckIn:C.Wait] Running Loop=1
2018-03-10T18:31:23.853Z,1520706683.853 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-03-10T18:31:25.133Z,1520706685.133 [BPC1](FAULT): Failed to initialize
2018-03-10T18:31:25.133Z,1520706685.133 [BPC1] Communications Fault, FailCount= 3
2018-03-10T18:31:25.133Z,1520706685.133 [BPC1](ERROR): Communications Fault
2018-03-10T18:31:25.201Z,1520706685.201 [CBIT](ERROR): Communications Fault in component: BPC1
2018-03-10T18:31:26.376Z,1520706686.376 [CBIT](INFO): Clearing failed state for component BPC1
2018-03-10T18:31:26.376Z,1520706686.376 [BPC1] No Fault, FailCount= 3
2018-03-10T18:32:00.637Z,1520706720.637 [BPC1](FAULT): Failed to initialize
2018-03-10T18:32:00.637Z,1520706720.637 [BPC1] Communications Fault, FailCount= 4
2018-03-10T18:32:00.637Z,1520706720.637 [BPC1](ERROR): Communications Fault
2018-03-10T18:32:00.729Z,1520706720.729 [CBIT](ERROR): Communications Fault in component: BPC1
2018-03-10T18:32:01.891Z,1520706721.891 [CBIT](INFO): Clearing failed state for component BPC1
2018-03-10T18:32:01.891Z,1520706721.891 [BPC1] No Fault, FailCount= 4
2018-03-10T18:32:03.406Z,1520706723.406 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session.
2018-03-10T18:32:05.459Z,1520706725.459 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T18:32:05.459Z,1520706725.459 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 18
2018-03-10T18:32:05.459Z,1520706725.459 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-10T18:32:05.472Z,1520706725.472 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-10T18:32:05.892Z,1520706725.892 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-10T18:32:05.892Z,1520706725.892 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 18
2018-03-10T18:32:06.229Z,1520706726.229 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-10T18:32:06.230Z,1520706726.230 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-10T18:32:06.230Z,1520706726.230 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-10T18:32:33.800Z,1520706753.800 [NAL9602](INFO): Powering down
2018-03-10T18:35:06.567Z,1520706906.567 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T18:35:06.567Z,1520706906.567 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 19
2018-03-10T18:35:06.567Z,1520706906.567 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-10T18:35:06.597Z,1520706906.597 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-10T18:35:06.972Z,1520706906.972 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-10T18:35:06.972Z,1520706906.972 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 19
2018-03-10T18:35:07.370Z,1520706907.370 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-10T18:35:07.370Z,1520706907.370 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-10T18:35:07.370Z,1520706907.370 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-10T18:35:44.519Z,1520706944.519 [CBIT](DEBUG): EFC running - data check-sum false
2018-03-10T18:36:24.200Z,1520706984.200 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-03-10T18:36:24.200Z,1520706984.200 [Default:CheckIn:C.Wait] Stopped
2018-03-10T18:36:24.200Z,1520706984.200 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-03-10T18:36:24.200Z,1520706984.200 [Default:CheckIn:D] Running Loop=1
2018-03-10T18:36:24.519Z,1520706984.519 [Default:CheckIn:D] Stopped
2018-03-10T18:36:24.519Z,1520706984.519 [Default:CheckIn:E] Running Loop=1
2018-03-10T18:36:24.925Z,1520706984.925 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 797.109961 min 
2018-03-10T18:36:24.925Z,1520706984.925 [Default:CheckIn:E] Stopped
2018-03-10T18:36:24.925Z,1520706984.925 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-03-10T18:36:24.925Z,1520706984.925 [Default:CheckIn] Stopped
2018-03-10T18:36:24.926Z,1520706984.926 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-03-10T18:36:24.926Z,1520706984.926 [Default:CheckIn](INFO): Running loop #79
2018-03-10T18:36:24.926Z,1520706984.926 [Default:CheckIn] Running Loop=79
2018-03-10T18:36:24.926Z,1520706984.926 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-03-10T18:36:24.926Z,1520706984.926 [Default:CheckIn:Read_GPS] Running Loop=1
2018-03-10T18:36:30.214Z,1520706990.214 [NAL9602](INFO): Powering up
2018-03-10T18:36:41.404Z,1520707001.404 [NAL9602](INFO): NAL9602 initialized
2018-03-10T18:37:13.414Z,1520707033.414 [NAL9602](ERROR): Failed to receive proper response when querying signal strength for MT queue check.
2018-03-10T18:37:13.491Z,1520707033.491 [NAL9602](FAULT): received: 
+CSQ:0

OK39, 2, 0, 0, 0

OK
2018-03-10T18:37:13.491Z,1520707033.491 [NAL9602] Data Fault, FailCount= 5
2018-03-10T18:37:13.491Z,1520707033.491 [NAL9602](ERROR): Data Fault
2018-03-10T18:37:13.575Z,1520707033.575 [CBIT](ERROR): Data Fault in component: NAL9602
2018-03-10T18:37:13.576Z,1520707033.576 [CBIT](CRITICAL): Data Fault in component: NAL9602
2018-03-10T18:37:13.804Z,1520707033.804 [NAL9602](INFO): Powering down
2018-03-10T18:37:13.891Z,1520707033.891 [CBIT](INFO): Critical error at 20180310T183713
2018-03-10T18:38:07.701Z,1520707087.701 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T18:38:07.701Z,1520707087.701 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 20
2018-03-10T18:38:07.701Z,1520707087.701 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-10T18:38:07.747Z,1520707087.747 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-10T18:38:08.112Z,1520707088.112 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-10T18:38:08.112Z,1520707088.112 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 20
2018-03-10T18:38:08.500Z,1520707088.500 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-10T18:38:08.500Z,1520707088.500 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-10T18:38:08.500Z,1520707088.500 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-10T18:39:13.641Z,1520707153.641 [CBIT](INFO): Clearing failed state for component NAL9602
2018-03-10T18:39:13.641Z,1520707153.641 [NAL9602] No Fault, FailCount= 5
2018-03-10T18:39:13.940Z,1520707153.940 [NAL9602](INFO): Powering up NAL9602
2018-03-10T18:39:24.740Z,1520707164.740 [NAL9602](INFO): NAL9602 initialized
2018-03-10T18:39:25.556Z,1520707165.556 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-03-10T18:39:25.556Z,1520707165.556 [NAL9602] Data Fault, FailCount= 1
2018-03-10T18:39:25.556Z,1520707165.556 [NAL9602](ERROR): Data Fault
2018-03-10T18:39:25.708Z,1520707165.708 [CBIT](ERROR): Data Fault in component: NAL9602
2018-03-10T18:39:25.952Z,1520707165.952 [NAL9602](INFO): Powering down
2018-03-10T18:39:30.734Z,1520707170.734 [CBIT](INFO): Clearing failed state for component NAL9602
2018-03-10T18:39:30.734Z,1520707170.734 [NAL9602] No Fault, FailCount= 1
2018-03-10T18:39:55.968Z,1520707195.968 [NAL9602](INFO): Powering up NAL9602
2018-03-10T18:39:56.007Z,1520707196.007 [BPC1](ERROR): Failed to receive battery data
2018-03-10T18:39:56.008Z,1520707196.008 [BPC1] Communications Fault, FailCount= 1
2018-03-10T18:39:56.008Z,1520707196.008 [BPC1](ERROR): Communications Fault
2018-03-10T18:39:56.056Z,1520707196.056 [CBIT](ERROR): Communications Fault in component: BPC1
2018-03-10T18:39:57.225Z,1520707197.225 [CBIT](INFO): Clearing failed state for component BPC1
2018-03-10T18:39:57.225Z,1520707197.225 [BPC1] No Fault, FailCount= 1
2018-03-10T18:40:07.168Z,1520707207.168 [NAL9602](INFO): NAL9602 initialized
2018-03-10T18:40:30.489Z,1520707230.489 [BPC1](FAULT): Failed to initialize
2018-03-10T18:40:30.489Z,1520707230.489 [BPC1] Communications Fault, FailCount= 2
2018-03-10T18:40:30.489Z,1520707230.489 [BPC1](ERROR): Communications Fault
2018-03-10T18:40:30.545Z,1520707230.545 [CBIT](ERROR): Communications Fault in component: BPC1
2018-03-10T18:40:31.470Z,1520707231.470 [CBIT](INFO): Clearing failed state for component BPC1
2018-03-10T18:40:31.470Z,1520707231.470 [BPC1] No Fault, FailCount= 2
2018-03-10T18:40:34.585Z,1520707234.585 [NAL9602](INFO): SBD MO Status=2, MOMSN=5839, MT Status=2, MTMSN=0
2018-03-10T18:40:34.586Z,1520707234.586 [NAL9602](ERROR): Failed to initiate SBD session. Error code: 2
2018-03-10T18:41:02.218Z,1520707262.218 [BPC1](FAULT): Failed to initialize
2018-03-10T18:41:02.218Z,1520707262.218 [BPC1] Communications Fault, FailCount= 3
2018-03-10T18:41:02.218Z,1520707262.218 [BPC1](ERROR): Communications Fault
2018-03-10T18:41:02.275Z,1520707262.275 [CBIT](ERROR): Communications Fault in component: BPC1
2018-03-10T18:41:03.503Z,1520707263.503 [CBIT](INFO): Clearing failed state for component BPC1
2018-03-10T18:41:03.503Z,1520707263.503 [BPC1] No Fault, FailCount= 3
2018-03-10T18:41:08.661Z,1520707268.661 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T18:41:08.661Z,1520707268.661 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 21
2018-03-10T18:41:08.661Z,1520707268.661 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-10T18:41:08.715Z,1520707268.715 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-10T18:41:09.040Z,1520707269.040 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-10T18:41:09.040Z,1520707269.040 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 21
2018-03-10T18:41:09.473Z,1520707269.473 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-10T18:41:09.473Z,1520707269.473 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-10T18:41:09.474Z,1520707269.474 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-10T18:41:25.056Z,1520707285.056 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-03-10T18:36:24.9Z
2018-03-10T18:41:25.056Z,1520707285.056 [Default:CheckIn:Read_GPS] Stopped
2018-03-10T18:41:25.056Z,1520707285.056 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-03-10T18:41:30.640Z,1520707290.640 [NAL9602](INFO): SBD MO Status=2, MOMSN=5839, MT Status=2, MTMSN=0
2018-03-10T18:41:30.640Z,1520707290.640 [NAL9602](ERROR): Failed to initiate SBD session. Error code: 2
2018-03-10T18:41:34.336Z,1520707294.336 [DataOverHttps](INFO): Sending 69 bytes from file Logs/20180310T051512/Courier0316.lzma
2018-03-10T18:41:34.386Z,1520707294.386 [BPC1](FAULT): Failed to initialize
2018-03-10T18:41:34.386Z,1520707294.386 [BPC1] Communications Fault, FailCount= 4
2018-03-10T18:41:34.386Z,1520707294.386 [BPC1](ERROR): Communications Fault
2018-03-10T18:41:34.434Z,1520707294.434 [CBIT](ERROR): Communications Fault in component: BPC1
2018-03-10T18:41:35.254Z,1520707295.254 [DataOverHttps](INFO): Moved sent file to Logs/20180310T051512/Courier0316.lzma.bak
2018-03-10T18:41:35.254Z,1520707295.254 [DataOverHttps](INFO): SBD MOMSN=8007172
2018-03-10T18:41:35.454Z,1520707295.454 [CBIT](INFO): Clearing failed state for component BPC1
2018-03-10T18:41:35.454Z,1520707295.454 [BPC1] No Fault, FailCount= 4
2018-03-10T18:41:47.689Z,1520707307.689 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session.
2018-03-10T18:41:48.232Z,1520707308.232 [DataOverHttps](INFO): Sending 290 bytes from file Logs/20180310T051512/Express0317.lzma
2018-03-10T18:41:49.030Z,1520707309.030 [DataOverHttps](INFO): Moved sent file to Logs/20180310T051512/Express0317.lzma.bak
2018-03-10T18:41:49.030Z,1520707309.030 [DataOverHttps](INFO): SBD MOMSN=8007176
2018-03-10T18:41:50.612Z,1520707310.612 [Default:CheckIn:Read_Iridium] Stopped
2018-03-10T18:41:50.612Z,1520707310.612 [Default:CheckIn:C.Wait] Running Loop=1
2018-03-10T18:41:50.612Z,1520707310.612 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-03-10T18:42:18.028Z,1520707338.028 [NAL9602](INFO): Powering down
2018-03-10T18:44:09.673Z,1520707449.673 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T18:44:09.673Z,1520707449.673 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 22
2018-03-10T18:44:09.673Z,1520707449.673 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-10T18:44:09.706Z,1520707449.706 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-10T18:44:10.104Z,1520707450.104 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-10T18:44:10.104Z,1520707450.104 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 22
2018-03-10T18:44:10.467Z,1520707450.467 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-10T18:44:10.468Z,1520707450.468 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-10T18:44:10.468Z,1520707450.468 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-10T18:45:44.722Z,1520707544.722 [CBIT](DEBUG): EFC running - data check-sum false
2018-03-10T18:45:51.475Z,1520707551.475 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:45:56.352Z,1520707556.352 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:45:56.483Z,1520707556.483 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:45:56.842Z,1520707556.842 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:45:57.243Z,1520707557.243 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:45:57.647Z,1520707557.647 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:45:58.041Z,1520707558.041 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:45:58.441Z,1520707558.441 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:45:58.850Z,1520707558.850 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:45:59.242Z,1520707559.242 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:45:59.641Z,1520707559.641 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:46:00.041Z,1520707560.041 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:46:00.442Z,1520707560.442 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:46:00.842Z,1520707560.842 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:46:01.242Z,1520707561.242 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:46:01.641Z,1520707561.641 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:46:02.042Z,1520707562.042 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:46:02.444Z,1520707562.444 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:46:02.845Z,1520707562.845 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:46:03.233Z,1520707563.233 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:46:03.650Z,1520707563.650 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:46:04.034Z,1520707564.034 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:46:04.435Z,1520707564.435 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:46:04.833Z,1520707564.833 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:46:05.239Z,1520707565.239 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:46:05.641Z,1520707565.641 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:46:06.041Z,1520707566.041 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:46:06.453Z,1520707566.453 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:46:06.840Z,1520707566.840 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:46:07.245Z,1520707567.245 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:46:07.634Z,1520707567.634 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:46:08.034Z,1520707568.034 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:46:08.442Z,1520707568.442 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:46:08.854Z,1520707568.854 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:46:09.246Z,1520707569.246 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:46:09.644Z,1520707569.644 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:46:10.054Z,1520707570.054 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:46:10.434Z,1520707570.434 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:46:10.837Z,1520707570.837 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:46:11.233Z,1520707571.233 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:46:11.633Z,1520707571.633 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:46:12.036Z,1520707572.036 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:46:12.435Z,1520707572.435 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:46:12.841Z,1520707572.841 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:46:13.241Z,1520707573.241 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:46:13.641Z,1520707573.641 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:46:14.043Z,1520707574.043 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:46:14.435Z,1520707574.435 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:46:14.834Z,1520707574.834 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:46:15.237Z,1520707575.237 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:46:15.633Z,1520707575.633 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:46:16.035Z,1520707576.035 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:46:16.442Z,1520707576.442 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:46:16.845Z,1520707576.845 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:46:17.246Z,1520707577.246 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:46:17.642Z,1520707577.642 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:46:18.041Z,1520707578.041 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:46:18.443Z,1520707578.443 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:46:46.470Z,1520707606.470 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:46:46.833Z,1520707606.833 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:46:47.239Z,1520707607.239 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:46:47.642Z,1520707607.642 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:46:48.045Z,1520707608.045 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:46:48.441Z,1520707608.441 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:46:48.855Z,1520707608.855 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:46:49.242Z,1520707609.242 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:46:49.646Z,1520707609.646 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:46:50.033Z,1520707610.033 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:46:50.433Z,1520707610.433 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:46:50.835Z,1520707610.835 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:46:50.885Z,1520707610.885 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-03-10T18:46:50.885Z,1520707610.885 [Default:CheckIn:C.Wait] Stopped
2018-03-10T18:46:50.885Z,1520707610.885 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-03-10T18:46:50.885Z,1520707610.885 [Default:CheckIn:D] Running Loop=1
2018-03-10T18:46:51.235Z,1520707611.235 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:46:51.287Z,1520707611.287 [Default:CheckIn:D] Stopped
2018-03-10T18:46:51.287Z,1520707611.287 [Default:CheckIn:E] Running Loop=1
2018-03-10T18:46:51.667Z,1520707611.667 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:46:51.689Z,1520707611.689 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 807.556055 min 
2018-03-10T18:46:51.689Z,1520707611.689 [Default:CheckIn:E] Stopped
2018-03-10T18:46:51.689Z,1520707611.689 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-03-10T18:46:51.689Z,1520707611.689 [Default:CheckIn] Stopped
2018-03-10T18:46:51.689Z,1520707611.689 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-03-10T18:46:51.690Z,1520707611.690 [Default:CheckIn](INFO): Running loop #80
2018-03-10T18:46:51.690Z,1520707611.690 [Default:CheckIn] Running Loop=80
2018-03-10T18:46:51.690Z,1520707611.690 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-03-10T18:46:51.690Z,1520707611.690 [Default:CheckIn:Read_GPS] Running Loop=1
2018-03-10T18:46:57.006Z,1520707617.006 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:46:57.161Z,1520707617.161 [NAL9602](INFO): Powering up
2018-03-10T18:46:57.182Z,1520707617.182 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:46:57.581Z,1520707617.581 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:46:57.976Z,1520707617.976 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:46:58.367Z,1520707618.367 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:46:58.768Z,1520707618.768 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:46:59.157Z,1520707619.157 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:46:59.553Z,1520707619.553 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:46:59.965Z,1520707619.965 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:47:00.353Z,1520707620.353 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:47:00.782Z,1520707620.782 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:47:01.163Z,1520707621.163 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:47:01.563Z,1520707621.563 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:47:01.962Z,1520707621.962 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:47:02.353Z,1520707622.353 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:47:02.753Z,1520707622.753 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:47:03.154Z,1520707623.154 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:47:03.554Z,1520707623.554 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:47:03.953Z,1520707623.953 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:47:04.380Z,1520707624.380 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:47:04.759Z,1520707624.759 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:47:05.162Z,1520707625.162 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:47:05.562Z,1520707625.562 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:47:05.964Z,1520707625.964 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:47:06.383Z,1520707626.383 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:47:06.780Z,1520707626.780 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:47:07.153Z,1520707627.153 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:47:07.558Z,1520707627.558 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:47:07.972Z,1520707627.972 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:47:08.340Z,1520707628.340 [NAL9602](INFO): NAL9602 initialized
2018-03-10T18:47:08.357Z,1520707628.357 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:47:10.812Z,1520707630.812 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T18:47:10.812Z,1520707630.812 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 23
2018-03-10T18:47:10.812Z,1520707630.812 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-10T18:47:10.846Z,1520707630.846 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-10T18:47:11.205Z,1520707631.205 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-10T18:47:11.205Z,1520707631.205 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 23
2018-03-10T18:47:11.578Z,1520707631.578 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-10T18:47:11.578Z,1520707631.578 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-10T18:47:11.595Z,1520707631.595 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-10T18:47:12.361Z,1520707632.361 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:47:12.761Z,1520707632.761 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:47:13.153Z,1520707633.153 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:47:13.553Z,1520707633.553 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:47:13.955Z,1520707633.955 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:47:14.380Z,1520707634.380 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:47:14.754Z,1520707634.754 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:47:15.169Z,1520707635.169 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:47:15.591Z,1520707635.591 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:47:15.963Z,1520707635.963 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:47:16.360Z,1520707636.360 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:47:16.762Z,1520707636.762 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:47:17.162Z,1520707637.162 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:47:17.565Z,1520707637.565 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:47:17.972Z,1520707637.972 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:47:18.354Z,1520707638.354 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:47:18.756Z,1520707638.756 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:47:19.153Z,1520707639.153 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:47:19.552Z,1520707639.552 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:47:19.986Z,1520707639.986 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:47:20.354Z,1520707640.354 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:47:20.765Z,1520707640.765 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:47:21.166Z,1520707641.166 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:47:21.561Z,1520707641.561 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:47:21.953Z,1520707641.953 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:47:22.355Z,1520707642.355 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:47:22.782Z,1520707642.782 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:47:23.154Z,1520707643.154 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:47:23.576Z,1520707643.576 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:47:23.968Z,1520707643.968 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:47:24.362Z,1520707644.362 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:47:24.753Z,1520707644.753 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:47:25.155Z,1520707645.155 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:47:25.553Z,1520707645.553 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:47:25.955Z,1520707645.955 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:47:26.389Z,1520707646.389 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:47:26.754Z,1520707646.754 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:47:27.172Z,1520707647.172 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:47:27.566Z,1520707647.566 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:47:27.968Z,1520707647.968 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:47:28.380Z,1520707648.380 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:47:28.753Z,1520707648.753 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:47:29.153Z,1520707649.153 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:47:29.565Z,1520707649.565 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:47:29.975Z,1520707649.975 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:47:40.336Z,1520707660.336 [NAL9602](ERROR): Failed to receive proper response when querying signal strength for MT queue check.
2018-03-10T18:47:40.411Z,1520707660.411 [NAL9602](FAULT): received: 
+CSQ:0

OK39, 2, 0, 0, 0

OK
2018-03-10T18:47:40.411Z,1520707660.411 [NAL9602] Data Fault, FailCount= 2
2018-03-10T18:47:40.411Z,1520707660.411 [NAL9602](ERROR): Data Fault
2018-03-10T18:47:40.522Z,1520707660.522 [CBIT](ERROR): Data Fault in component: NAL9602
2018-03-10T18:47:40.736Z,1520707660.736 [NAL9602](INFO): Powering down
2018-03-10T18:47:41.640Z,1520707661.640 [CBIT](INFO): Clearing failed state for component NAL9602
2018-03-10T18:47:41.640Z,1520707661.640 [NAL9602] No Fault, FailCount= 2
2018-03-10T18:47:48.353Z,1520707668.353 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:47:48.755Z,1520707668.755 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:47:49.162Z,1520707669.162 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:47:49.561Z,1520707669.561 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:47:49.979Z,1520707669.979 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:47:50.364Z,1520707670.364 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:47:50.753Z,1520707670.753 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:47:51.181Z,1520707671.181 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:47:51.553Z,1520707671.553 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:47:57.768Z,1520707677.768 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:47:58.170Z,1520707678.170 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:47:58.594Z,1520707678.594 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:47:58.935Z,1520707678.935 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:47:59.339Z,1520707679.339 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:47:59.742Z,1520707679.742 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:48:00.145Z,1520707680.145 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:48:00.542Z,1520707680.542 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:48:00.941Z,1520707680.941 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:48:01.343Z,1520707681.343 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:48:01.733Z,1520707681.733 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:48:02.169Z,1520707682.169 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:48:02.538Z,1520707682.538 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:48:02.933Z,1520707682.933 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:48:03.334Z,1520707683.334 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:48:03.742Z,1520707683.742 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:48:04.141Z,1520707684.141 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:48:04.546Z,1520707684.546 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:48:04.933Z,1520707684.933 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:48:05.334Z,1520707685.334 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:48:05.749Z,1520707685.749 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:48:10.916Z,1520707690.916 [NAL9602](INFO): Powering up NAL9602
2018-03-10T18:48:22.116Z,1520707702.116 [NAL9602](INFO): NAL9602 initialized
2018-03-10T18:49:49.470Z,1520707789.470 [BPC1](ERROR): Failed to receive battery data
2018-03-10T18:49:49.470Z,1520707789.470 [BPC1] Communications Fault, FailCount= 1
2018-03-10T18:49:49.470Z,1520707789.470 [BPC1](ERROR): Communications Fault
2018-03-10T18:49:49.564Z,1520707789.564 [CBIT](ERROR): Communications Fault in component: BPC1
2018-03-10T18:49:50.759Z,1520707790.759 [CBIT](INFO): Clearing failed state for component BPC1
2018-03-10T18:49:50.760Z,1520707790.760 [BPC1] No Fault, FailCount= 1
2018-03-10T18:50:11.647Z,1520707811.647 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T18:50:11.648Z,1520707811.648 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 24
2018-03-10T18:50:11.648Z,1520707811.648 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-10T18:50:11.681Z,1520707811.681 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-10T18:50:12.086Z,1520707812.086 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-10T18:50:12.086Z,1520707812.086 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 24
2018-03-10T18:50:12.417Z,1520707812.417 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-10T18:50:12.417Z,1520707812.417 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-10T18:50:12.418Z,1520707812.418 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-10T18:50:21.206Z,1520707821.206 [BPC1](FAULT): Failed to initialize
2018-03-10T18:50:21.206Z,1520707821.206 [BPC1] Communications Fault, FailCount= 2
2018-03-10T18:50:21.207Z,1520707821.207 [BPC1](ERROR): Communications Fault
2018-03-10T18:50:21.246Z,1520707821.246 [CBIT](ERROR): Communications Fault in component: BPC1
2018-03-10T18:50:22.485Z,1520707822.485 [CBIT](INFO): Clearing failed state for component BPC1
2018-03-10T18:50:22.485Z,1520707822.485 [BPC1] No Fault, FailCount= 2
2018-03-10T18:50:56.515Z,1520707856.515 [BPC1](FAULT): Failed to initialize
2018-03-10T18:50:56.515Z,1520707856.515 [BPC1] Communications Fault, FailCount= 3
2018-03-10T18:50:56.515Z,1520707856.515 [BPC1](ERROR): Communications Fault
2018-03-10T18:50:56.545Z,1520707856.545 [CBIT](ERROR): Communications Fault in component: BPC1
2018-03-10T18:50:57.507Z,1520707857.507 [CBIT](INFO): Clearing failed state for component BPC1
2018-03-10T18:50:57.507Z,1520707857.507 [BPC1] No Fault, FailCount= 3
2018-03-10T18:51:28.237Z,1520707888.237 [BPC1](FAULT): Failed to initialize
2018-03-10T18:51:28.237Z,1520707888.237 [BPC1] Communications Fault, FailCount= 4
2018-03-10T18:51:28.237Z,1520707888.237 [BPC1](ERROR): Communications Fault
2018-03-10T18:51:28.306Z,1520707888.306 [CBIT](ERROR): Communications Fault in component: BPC1
2018-03-10T18:51:29.479Z,1520707889.479 [CBIT](INFO): Clearing failed state for component BPC1
2018-03-10T18:51:29.479Z,1520707889.479 [BPC1] No Fault, FailCount= 4
2018-03-10T18:51:51.856Z,1520707911.856 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-03-10T18:46:51.7Z
2018-03-10T18:51:51.857Z,1520707911.856 [Default:CheckIn:Read_GPS] Stopped
2018-03-10T18:51:51.857Z,1520707911.857 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-03-10T18:51:58.217Z,1520707918.217 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20180310T051512/Courier0320.lzma
2018-03-10T18:51:59.002Z,1520707919.002 [DataOverHttps](INFO): Moved sent file to Logs/20180310T051512/Courier0320.lzma.bak
2018-03-10T18:51:59.002Z,1520707919.002 [DataOverHttps](INFO): SBD MOMSN=8007259
2018-03-10T18:52:14.045Z,1520707934.045 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session.
2018-03-10T18:52:14.253Z,1520707934.253 [DataOverHttps](INFO): Sending 271 bytes from file Logs/20180310T051512/Express0321.lzma
2018-03-10T18:52:15.062Z,1520707935.062 [DataOverHttps](INFO): Moved sent file to Logs/20180310T051512/Express0321.lzma.bak
2018-03-10T18:52:15.062Z,1520707935.062 [DataOverHttps](INFO): SBD MOMSN=8007261
2018-03-10T18:52:15.955Z,1520707935.955 [Default:CheckIn:Read_Iridium] Stopped
2018-03-10T18:52:15.955Z,1520707935.955 [Default:CheckIn:C.Wait] Running Loop=1
2018-03-10T18:52:15.955Z,1520707935.955 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-03-10T18:52:44.320Z,1520707964.320 [NAL9602](INFO): Powering down
2018-03-10T18:53:12.781Z,1520707992.781 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T18:53:12.781Z,1520707992.781 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 25
2018-03-10T18:53:12.781Z,1520707992.781 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-10T18:53:12.820Z,1520707992.820 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-10T18:53:13.263Z,1520707993.263 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-10T18:53:13.263Z,1520707993.263 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 25
2018-03-10T18:53:13.567Z,1520707993.567 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-10T18:53:13.567Z,1520707993.567 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-10T18:53:13.568Z,1520707993.568 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-10T18:55:40.897Z,1520708140.897 [BPC1](ERROR): Bank A: No match for stick 2 serial number:1717 in the onboard configuration file.
2018-03-10T18:55:40.897Z,1520708140.897 [BPC1](ERROR): Failed to parse Bank A battery data
2018-03-10T18:55:40.897Z,1520708140.897 [BPC1] Data Fault, FailCount= 1
2018-03-10T18:55:40.897Z,1520708140.897 [BPC1](ERROR): Data Fault
2018-03-10T18:55:41.028Z,1520708141.028 [CBIT](ERROR): Data Fault in component: BPC1
2018-03-10T18:55:42.147Z,1520708142.147 [CBIT](INFO): Clearing failed state for component BPC1
2018-03-10T18:55:42.147Z,1520708142.147 [BPC1] No Fault, FailCount= 1
2018-03-10T18:55:44.945Z,1520708144.945 [CBIT](DEBUG): EFC running - data check-sum false
2018-03-10T18:56:13.758Z,1520708173.758 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T18:56:13.758Z,1520708173.758 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 26
2018-03-10T18:56:13.758Z,1520708173.758 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-10T18:56:13.771Z,1520708173.771 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-10T18:56:14.118Z,1520708174.118 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-10T18:56:14.118Z,1520708174.118 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 26
2018-03-10T18:56:14.512Z,1520708174.512 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-10T18:56:14.512Z,1520708174.512 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-10T18:56:14.512Z,1520708174.512 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-10T18:57:16.262Z,1520708236.262 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-03-10T18:57:16.262Z,1520708236.262 [Default:CheckIn:C.Wait] Stopped
2018-03-10T18:57:16.262Z,1520708236.262 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-03-10T18:57:16.262Z,1520708236.262 [Default:CheckIn:D] Running Loop=1
2018-03-10T18:57:16.683Z,1520708236.683 [Default:CheckIn:D] Stopped
2018-03-10T18:57:16.683Z,1520708236.683 [Default:CheckIn:E] Running Loop=1
2018-03-10T18:57:17.079Z,1520708237.079 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 817.979362 min 
2018-03-10T18:57:17.079Z,1520708237.079 [Default:CheckIn:E] Stopped
2018-03-10T18:57:17.079Z,1520708237.079 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-03-10T18:57:17.079Z,1520708237.079 [Default:CheckIn] Stopped
2018-03-10T18:57:17.079Z,1520708237.079 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-03-10T18:57:17.080Z,1520708237.080 [Default:CheckIn](INFO): Running loop #81
2018-03-10T18:57:17.080Z,1520708237.080 [Default:CheckIn] Running Loop=81
2018-03-10T18:57:17.080Z,1520708237.080 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-03-10T18:57:17.080Z,1520708237.080 [Default:CheckIn:Read_GPS] Running Loop=1
2018-03-10T18:57:22.688Z,1520708242.688 [NAL9602](INFO): Powering up
2018-03-10T18:57:33.880Z,1520708253.880 [NAL9602](INFO): NAL9602 initialized
2018-03-10T18:57:34.680Z,1520708254.680 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-03-10T18:57:34.680Z,1520708254.680 [NAL9602] Data Fault, FailCount= 3
2018-03-10T18:57:34.680Z,1520708254.680 [NAL9602](ERROR): Data Fault
2018-03-10T18:57:34.819Z,1520708254.819 [CBIT](ERROR): Data Fault in component: NAL9602
2018-03-10T18:57:35.080Z,1520708255.080 [NAL9602](INFO): Powering down
2018-03-10T18:57:36.003Z,1520708256.003 [CBIT](INFO): Clearing failed state for component NAL9602
2018-03-10T18:57:36.003Z,1520708256.003 [NAL9602] No Fault, FailCount= 3
2018-03-10T18:57:57.897Z,1520708277.897 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:57:58.317Z,1520708278.317 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:57:58.699Z,1520708278.699 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:57:59.097Z,1520708279.097 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:57:59.497Z,1520708279.497 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:57:59.899Z,1520708279.899 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:58:00.299Z,1520708280.299 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:58:00.705Z,1520708280.705 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:58:01.105Z,1520708281.105 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:58:01.505Z,1520708281.505 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:58:01.914Z,1520708281.914 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:58:02.316Z,1520708282.316 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:58:02.706Z,1520708282.706 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:58:03.106Z,1520708283.106 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:58:03.506Z,1520708283.506 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:58:03.897Z,1520708283.897 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:58:04.296Z,1520708284.296 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:58:04.697Z,1520708284.697 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:58:05.097Z,1520708285.097 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:58:05.504Z,1520708285.504 [NAL9602](INFO): Powering up NAL9602
2018-03-10T18:58:05.532Z,1520708285.532 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:58:05.902Z,1520708285.902 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:58:06.306Z,1520708286.306 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:58:06.704Z,1520708286.704 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:58:07.114Z,1520708287.114 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:58:07.505Z,1520708287.505 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:58:07.905Z,1520708287.905 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:58:08.296Z,1520708288.296 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:58:08.698Z,1520708288.698 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:58:09.097Z,1520708289.097 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:58:09.510Z,1520708289.510 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:58:09.902Z,1520708289.902 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:58:10.302Z,1520708290.302 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:58:10.707Z,1520708290.707 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:58:11.105Z,1520708291.105 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:58:11.506Z,1520708291.506 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:58:11.907Z,1520708291.907 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:58:12.305Z,1520708292.305 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:58:12.704Z,1520708292.704 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:58:13.105Z,1520708293.105 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:58:13.506Z,1520708293.506 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:58:13.904Z,1520708293.904 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:58:14.317Z,1520708294.317 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:58:14.696Z,1520708294.696 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:58:15.099Z,1520708295.099 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:58:15.498Z,1520708295.498 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:58:15.909Z,1520708295.909 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:58:16.314Z,1520708296.314 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:58:16.680Z,1520708296.680 [NAL9602](INFO): NAL9602 initialized
2018-03-10T18:58:16.712Z,1520708296.712 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:58:17.097Z,1520708297.097 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:58:21.946Z,1520708301.946 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:58:22.144Z,1520708302.144 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:58:22.530Z,1520708302.530 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:58:22.916Z,1520708302.916 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:58:23.310Z,1520708303.310 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:58:23.715Z,1520708303.715 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:58:24.132Z,1520708304.132 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:58:24.520Z,1520708304.520 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:58:24.905Z,1520708304.905 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:58:25.307Z,1520708305.307 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:58:25.734Z,1520708305.734 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:58:26.123Z,1520708306.123 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:58:26.527Z,1520708306.527 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:58:26.914Z,1520708306.914 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:58:27.312Z,1520708307.312 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:58:27.705Z,1520708307.705 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:58:28.136Z,1520708308.136 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:58:28.507Z,1520708308.507 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:58:28.911Z,1520708308.911 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:58:29.313Z,1520708309.313 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:58:29.706Z,1520708309.706 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:58:30.111Z,1520708310.111 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:58:30.505Z,1520708310.505 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:58:30.905Z,1520708310.905 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:58:31.307Z,1520708311.307 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:58:31.705Z,1520708311.705 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:58:32.130Z,1520708312.130 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:58:32.508Z,1520708312.508 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:58:32.914Z,1520708312.914 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:58:33.314Z,1520708313.314 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:58:33.724Z,1520708313.724 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:58:34.135Z,1520708314.135 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:58:34.512Z,1520708314.512 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:58:34.916Z,1520708314.916 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:58:35.314Z,1520708315.314 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:58:35.717Z,1520708315.717 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:58:36.131Z,1520708316.131 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:58:36.522Z,1520708316.522 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:58:36.905Z,1520708316.905 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:58:37.325Z,1520708317.325 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:58:37.742Z,1520708317.742 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:58:38.106Z,1520708318.106 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:58:38.513Z,1520708318.513 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:58:38.916Z,1520708318.916 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:58:38.933Z,1520708318.933 [BPC1](ERROR): Bank B: No match for stick 4 serial number:1717 in the onboard configuration file.
2018-03-10T18:58:38.933Z,1520708318.933 [BPC1](ERROR): Failed to parse Bank B battery data
2018-03-10T18:58:38.934Z,1520708318.934 [BPC1] Data Fault, FailCount= 1
2018-03-10T18:58:38.934Z,1520708318.934 [BPC1](ERROR): Data Fault
2018-03-10T18:58:39.040Z,1520708319.040 [CBIT](ERROR): Data Fault in component: BPC1
2018-03-10T18:58:39.325Z,1520708319.325 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:58:39.708Z,1520708319.708 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:58:40.107Z,1520708320.107 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:58:40.210Z,1520708320.210 [CBIT](INFO): Clearing failed state for component BPC1
2018-03-10T18:58:40.210Z,1520708320.210 [BPC1] No Fault, FailCount= 1
2018-03-10T18:58:40.516Z,1520708320.516 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:58:40.913Z,1520708320.913 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:58:41.329Z,1520708321.329 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:58:41.711Z,1520708321.711 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:58:42.116Z,1520708322.116 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:58:42.505Z,1520708322.505 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:58:42.905Z,1520708322.905 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:58:43.318Z,1520708323.318 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:58:43.699Z,1520708323.699 [NAL9602](INFO): SBD MO Status=0, MOMSN=5839, MT Status=0, MTMSN=0
2018-03-10T18:58:43.699Z,1520708323.699 [NAL9602](INFO): No messages in MT queue
2018-03-10T18:58:43.716Z,1520708323.716 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:58:44.113Z,1520708324.113 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:58:44.524Z,1520708324.524 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:58:44.927Z,1520708324.927 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:58:45.328Z,1520708325.328 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:58:45.705Z,1520708325.705 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:58:46.105Z,1520708326.105 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:58:46.509Z,1520708326.509 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:58:46.905Z,1520708326.905 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:58:47.317Z,1520708327.317 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:58:47.724Z,1520708327.724 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:58:48.145Z,1520708328.145 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:58:48.520Z,1520708328.520 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:58:48.918Z,1520708328.918 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:58:49.328Z,1520708329.328 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:58:49.715Z,1520708329.715 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:58:50.126Z,1520708330.126 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:58:50.530Z,1520708330.530 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:58:50.918Z,1520708330.918 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:58:51.340Z,1520708331.340 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:58:51.715Z,1520708331.715 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:58:52.116Z,1520708332.116 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:58:52.525Z,1520708332.525 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:58:52.923Z,1520708332.923 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:58:53.305Z,1520708333.305 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:58:53.706Z,1520708333.706 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:58:54.120Z,1520708334.120 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:58:54.516Z,1520708334.516 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:58:54.928Z,1520708334.928 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:58:55.318Z,1520708335.318 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:58:55.721Z,1520708335.721 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:58:56.137Z,1520708336.137 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:58:56.508Z,1520708336.508 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:58:56.913Z,1520708336.913 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:58:57.320Z,1520708337.320 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:58:57.728Z,1520708337.728 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:58:58.137Z,1520708338.137 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:58:58.519Z,1520708338.519 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:58:58.915Z,1520708338.915 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:58:59.313Z,1520708339.313 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:58:59.723Z,1520708339.723 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:59:00.114Z,1520708340.114 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:59:00.518Z,1520708340.518 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:59:00.949Z,1520708340.949 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:59:01.316Z,1520708341.316 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:59:01.705Z,1520708341.705 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:59:02.110Z,1520708342.110 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:59:02.511Z,1520708342.511 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:59:02.915Z,1520708342.915 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:59:03.316Z,1520708343.316 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:59:03.723Z,1520708343.723 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:59:04.124Z,1520708344.124 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:59:04.505Z,1520708344.505 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:59:04.905Z,1520708344.905 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:59:05.318Z,1520708345.318 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:59:05.721Z,1520708345.721 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:59:06.122Z,1520708346.122 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:59:06.523Z,1520708346.523 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:59:06.916Z,1520708346.916 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:59:07.312Z,1520708347.312 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:59:07.709Z,1520708347.709 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:59:08.106Z,1520708348.106 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:59:08.542Z,1520708348.542 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:59:08.942Z,1520708348.942 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:59:09.316Z,1520708349.316 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:59:09.714Z,1520708349.714 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:59:10.112Z,1520708350.112 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:59:10.515Z,1520708350.515 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:59:10.907Z,1520708350.907 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:59:11.331Z,1520708351.331 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:59:11.722Z,1520708351.722 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:59:12.123Z,1520708352.123 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:59:12.517Z,1520708352.517 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:59:12.905Z,1520708352.905 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:59:13.308Z,1520708353.308 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:59:13.706Z,1520708353.706 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:59:14.123Z,1520708354.123 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:59:14.517Z,1520708354.517 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:59:14.575Z,1520708354.575 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T18:59:14.575Z,1520708354.575 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 27
2018-03-10T18:59:14.575Z,1520708354.575 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-10T18:59:14.600Z,1520708354.600 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-10T18:59:14.922Z,1520708354.922 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:59:15.037Z,1520708355.037 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-10T18:59:15.037Z,1520708355.037 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 27
2018-03-10T18:59:15.320Z,1520708355.320 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:59:15.400Z,1520708355.400 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-10T18:59:15.401Z,1520708355.401 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-10T18:59:15.401Z,1520708355.401 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-10T18:59:15.716Z,1520708355.716 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:59:16.131Z,1520708356.131 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:59:16.506Z,1520708356.506 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:59:16.907Z,1520708356.907 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:59:17.334Z,1520708357.334 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:59:17.722Z,1520708357.722 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:59:18.132Z,1520708358.132 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:59:18.516Z,1520708358.516 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:59:18.913Z,1520708358.913 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:59:23.644Z,1520708363.644 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:59:23.663Z,1520708363.663 [BPC1](ERROR): Failed to receive battery data
2018-03-10T18:59:23.663Z,1520708363.663 [BPC1] Communications Fault, FailCount= 1
2018-03-10T18:59:23.663Z,1520708363.663 [BPC1](ERROR): Communications Fault
2018-03-10T18:59:23.688Z,1520708363.688 [CBIT](ERROR): Communications Fault in component: BPC1
2018-03-10T18:59:23.803Z,1520708363.803 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:59:24.140Z,1520708364.140 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:59:24.544Z,1520708364.544 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:59:24.629Z,1520708364.629 [CBIT](INFO): Clearing failed state for component BPC1
2018-03-10T18:59:24.630Z,1520708364.630 [BPC1] No Fault, FailCount= 1
2018-03-10T18:59:24.963Z,1520708364.963 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:59:25.330Z,1520708365.330 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:59:25.732Z,1520708365.732 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:59:26.134Z,1520708366.134 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:59:26.536Z,1520708366.536 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:59:26.935Z,1520708366.935 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:59:27.330Z,1520708367.330 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:59:27.732Z,1520708367.732 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:59:28.121Z,1520708368.121 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:59:28.543Z,1520708368.543 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:59:28.936Z,1520708368.936 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:59:29.370Z,1520708369.370 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:59:29.727Z,1520708369.727 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:59:30.148Z,1520708370.148 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:59:30.527Z,1520708370.527 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:59:30.934Z,1520708370.934 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:59:31.342Z,1520708371.342 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:59:31.745Z,1520708371.745 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:59:32.134Z,1520708372.134 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:59:32.523Z,1520708372.523 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:59:32.938Z,1520708372.938 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:59:33.333Z,1520708373.333 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:59:33.737Z,1520708373.737 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:59:34.140Z,1520708374.140 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:59:34.544Z,1520708374.544 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:59:34.947Z,1520708374.947 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:59:35.330Z,1520708375.330 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:59:35.740Z,1520708375.740 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:59:36.139Z,1520708376.139 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:59:36.544Z,1520708376.544 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:59:36.947Z,1520708376.947 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:59:37.367Z,1520708377.367 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:59:37.722Z,1520708377.722 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:59:38.134Z,1520708378.134 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:59:38.536Z,1520708378.536 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:59:38.977Z,1520708378.977 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:59:39.329Z,1520708379.329 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:59:39.731Z,1520708379.731 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:59:40.129Z,1520708380.129 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:59:40.550Z,1520708380.550 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:59:40.946Z,1520708380.946 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:59:41.334Z,1520708381.334 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:59:41.721Z,1520708381.721 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:59:42.123Z,1520708382.123 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:59:42.523Z,1520708382.523 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:59:42.932Z,1520708382.932 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:59:43.339Z,1520708383.339 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:59:43.744Z,1520708383.744 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:59:44.141Z,1520708384.141 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:59:44.524Z,1520708384.524 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:59:44.921Z,1520708384.921 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:59:45.329Z,1520708385.329 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:59:45.727Z,1520708385.727 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:59:46.175Z,1520708386.175 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:59:46.538Z,1520708386.538 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:59:46.943Z,1520708386.943 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:59:47.322Z,1520708387.322 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:59:47.723Z,1520708387.723 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:59:48.121Z,1520708388.121 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:59:48.533Z,1520708388.533 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:59:48.946Z,1520708388.946 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:59:49.364Z,1520708389.364 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:59:49.731Z,1520708389.731 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:59:50.145Z,1520708390.145 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:59:50.524Z,1520708390.524 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:59:50.931Z,1520708390.931 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:59:51.343Z,1520708391.343 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:59:51.773Z,1520708391.773 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:59:52.189Z,1520708392.189 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:59:52.531Z,1520708392.531 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:59:52.933Z,1520708392.933 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:59:53.331Z,1520708393.332 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:59:53.721Z,1520708393.721 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:59:54.140Z,1520708394.140 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:59:54.536Z,1520708394.536 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:59:54.968Z,1520708394.968 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:59:55.331Z,1520708395.331 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:59:55.340Z,1520708395.340 [BPC1](FAULT): Failed to initialize
2018-03-10T18:59:55.340Z,1520708395.340 [BPC1] Communications Fault, FailCount= 2
2018-03-10T18:59:55.340Z,1520708395.340 [BPC1](ERROR): Communications Fault
2018-03-10T18:59:55.403Z,1520708395.403 [CBIT](ERROR): Communications Fault in component: BPC1
2018-03-10T18:59:55.745Z,1520708395.745 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:59:56.133Z,1520708396.133 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:59:56.538Z,1520708396.538 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:59:56.632Z,1520708396.632 [CBIT](INFO): Clearing failed state for component BPC1
2018-03-10T18:59:56.632Z,1520708396.632 [BPC1] No Fault, FailCount= 2
2018-03-10T18:59:56.941Z,1520708396.941 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:59:57.322Z,1520708397.322 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:59:57.723Z,1520708397.723 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:59:58.134Z,1520708398.134 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:59:58.544Z,1520708398.544 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:59:58.944Z,1520708398.944 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:59:59.332Z,1520708399.332 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T18:59:59.731Z,1520708399.731 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:00:00.144Z,1520708400.144 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:00:00.548Z,1520708400.548 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:00:00.980Z,1520708400.980 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:00:01.325Z,1520708401.325 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:00:01.762Z,1520708401.762 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:00:02.142Z,1520708402.142 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:00:02.547Z,1520708402.547 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:00:02.933Z,1520708402.933 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:00:03.334Z,1520708403.334 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:00:03.730Z,1520708403.730 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:00:04.163Z,1520708404.163 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:00:04.537Z,1520708404.537 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:00:04.943Z,1520708404.943 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:00:05.328Z,1520708405.328 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:00:05.734Z,1520708405.734 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:00:06.150Z,1520708406.150 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:00:06.545Z,1520708406.545 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:00:06.943Z,1520708406.943 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:00:07.323Z,1520708407.323 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:00:07.769Z,1520708407.769 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:00:08.140Z,1520708408.140 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:00:08.565Z,1520708408.565 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:00:08.950Z,1520708408.950 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:00:09.329Z,1520708409.329 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:00:09.729Z,1520708409.729 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:00:10.139Z,1520708410.139 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:00:10.538Z,1520708410.538 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:00:10.957Z,1520708410.957 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:00:11.331Z,1520708411.331 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:00:11.732Z,1520708411.732 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:00:12.140Z,1520708412.140 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:00:12.589Z,1520708412.589 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:00:12.950Z,1520708412.950 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:00:13.324Z,1520708413.324 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:00:13.732Z,1520708413.732 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:00:14.141Z,1520708414.141 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:00:14.545Z,1520708414.545 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:00:14.944Z,1520708414.944 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:00:15.324Z,1520708415.324 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:00:15.721Z,1520708415.721 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:00:16.139Z,1520708416.139 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:00:16.546Z,1520708416.546 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:00:16.961Z,1520708416.961 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:00:17.333Z,1520708417.333 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:00:21.973Z,1520708421.973 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:00:22.108Z,1520708422.108 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:00:22.501Z,1520708422.501 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:00:22.885Z,1520708422.885 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:00:23.269Z,1520708423.269 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:00:23.666Z,1520708423.666 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:00:24.067Z,1520708424.067 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:00:24.476Z,1520708424.476 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:00:27.294Z,1520708427.294 [BPC1](FAULT): Failed to initialize
2018-03-10T19:00:27.294Z,1520708427.294 [BPC1] Communications Fault, FailCount= 3
2018-03-10T19:00:27.295Z,1520708427.295 [BPC1](ERROR): Communications Fault
2018-03-10T19:00:27.318Z,1520708427.318 [CBIT](ERROR): Communications Fault in component: BPC1
2018-03-10T19:00:28.526Z,1520708428.526 [CBIT](INFO): Clearing failed state for component BPC1
2018-03-10T19:00:28.527Z,1520708428.527 [BPC1] No Fault, FailCount= 3
2018-03-10T19:00:59.287Z,1520708459.287 [BPC1](FAULT): Failed to initialize
2018-03-10T19:00:59.287Z,1520708459.287 [BPC1] Communications Fault, FailCount= 4
2018-03-10T19:00:59.287Z,1520708459.287 [BPC1](ERROR): Communications Fault
2018-03-10T19:00:59.368Z,1520708459.368 [CBIT](ERROR): Communications Fault in component: BPC1
2018-03-10T19:01:00.515Z,1520708460.515 [CBIT](INFO): Clearing failed state for component BPC1
2018-03-10T19:01:00.515Z,1520708460.515 [BPC1] No Fault, FailCount= 4
2018-03-10T19:01:37.028Z,1520708497.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 0.379784 seconds old.
2018-03-10T19:01:37.030Z,1520708497.030 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 0.380206 seconds old.
2018-03-10T19:01:37.033Z,1520708497.033 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 0.376586 seconds old.
2018-03-10T19:01:37.457Z,1520708497.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 0.808806 seconds old.
2018-03-10T19:01:37.460Z,1520708497.460 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 0.809424 seconds old.
2018-03-10T19:01:37.462Z,1520708497.462 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 0.805416 seconds old.
2018-03-10T19:01:37.857Z,1520708497.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 1.209060 seconds old.
2018-03-10T19:01:37.860Z,1520708497.860 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 1.209669 seconds old.
2018-03-10T19:01:37.862Z,1520708497.862 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 1.205622 seconds old.
2018-03-10T19:01:38.235Z,1520708498.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 1.582531 seconds old.
2018-03-10T19:01:38.237Z,1520708498.237 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 1.587202 seconds old.
2018-03-10T19:01:38.260Z,1520708498.260 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 1.603496 seconds old.
2018-03-10T19:01:38.636Z,1520708498.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 1.987412 seconds old.
2018-03-10T19:01:38.638Z,1520708498.638 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 1.987808 seconds old.
2018-03-10T19:01:38.640Z,1520708498.640 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 1.984123 seconds old.
2018-03-10T19:01:39.042Z,1520708499.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 2.394230 seconds old.
2018-03-10T19:01:39.045Z,1520708499.045 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 2.394765 seconds old.
2018-03-10T19:01:39.059Z,1520708499.059 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 2.402889 seconds old.
2018-03-10T19:01:39.447Z,1520708499.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 2.798777 seconds old.
2018-03-10T19:01:39.449Z,1520708499.449 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 2.799245 seconds old.
2018-03-10T19:01:39.468Z,1520708499.468 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 2.811543 seconds old.
2018-03-10T19:01:39.842Z,1520708499.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 3.194062 seconds old.
2018-03-10T19:01:39.845Z,1520708499.845 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 3.194718 seconds old.
2018-03-10T19:01:39.847Z,1520708499.847 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 3.190863 seconds old.
2018-03-10T19:01:40.250Z,1520708500.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 3.602116 seconds old.
2018-03-10T19:01:40.253Z,1520708500.253 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 3.602725 seconds old.
2018-03-10T19:01:40.255Z,1520708500.255 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 3.598882 seconds old.
2018-03-10T19:01:40.631Z,1520708500.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 3.982520 seconds old.
2018-03-10T19:01:40.633Z,1520708500.633 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 3.983180 seconds old.
2018-03-10T19:01:40.636Z,1520708500.636 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 3.979364 seconds old.
2018-03-10T19:01:41.036Z,1520708501.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 4.388115 seconds old.
2018-03-10T19:01:41.039Z,1520708501.039 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 4.388546 seconds old.
2018-03-10T19:01:41.041Z,1520708501.041 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 4.384765 seconds old.
2018-03-10T19:01:41.460Z,1520708501.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 4.811546 seconds old.
2018-03-10T19:01:41.462Z,1520708501.462 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 4.812007 seconds old.
2018-03-10T19:01:41.485Z,1520708501.485 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 4.828357 seconds old.
2018-03-10T19:01:41.864Z,1520708501.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 5.216051 seconds old.
2018-03-10T19:01:41.887Z,1520708501.887 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 5.216519 seconds old.
2018-03-10T19:01:41.889Z,1520708501.889 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 5.232747 seconds old.
2018-03-10T19:01:42.248Z,1520708502.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 5.599686 seconds old.
2018-03-10T19:01:42.250Z,1520708502.250 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 5.600055 seconds old.
2018-03-10T19:01:42.257Z,1520708502.257 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 5.600399 seconds old.
2018-03-10T19:01:42.658Z,1520708502.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 6.009586 seconds old.
2018-03-10T19:01:42.660Z,1520708502.660 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 6.010258 seconds old.
2018-03-10T19:01:42.667Z,1520708502.667 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 6.006288 seconds old.
2018-03-10T19:01:43.048Z,1520708503.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 6.399934 seconds old.
2018-03-10T19:01:43.055Z,1520708503.055 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 6.400385 seconds old.
2018-03-10T19:01:43.057Z,1520708503.057 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 6.400834 seconds old.
2018-03-10T19:02:15.445Z,1520708535.445 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T19:02:15.445Z,1520708535.445 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 28
2018-03-10T19:02:15.445Z,1520708535.445 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-10T19:02:15.458Z,1520708535.458 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-10T19:02:15.918Z,1520708535.918 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-10T19:02:15.918Z,1520708535.918 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 28
2018-03-10T19:02:16.245Z,1520708536.245 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-10T19:02:16.245Z,1520708536.245 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-10T19:02:16.246Z,1520708536.246 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-10T19:02:17.459Z,1520708537.459 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-03-10T18:57:17.1Z
2018-03-10T19:02:17.459Z,1520708537.459 [Default:CheckIn:Read_GPS] Stopped
2018-03-10T19:02:17.459Z,1520708537.459 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-03-10T19:02:24.031Z,1520708544.031 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20180310T051512/Courier0324.lzma
2018-03-10T19:02:24.818Z,1520708544.818 [DataOverHttps](INFO): Moved sent file to Logs/20180310T051512/Courier0324.lzma.bak
2018-03-10T19:02:24.818Z,1520708544.818 [DataOverHttps](INFO): SBD MOMSN=8007429
2018-03-10T19:02:39.012Z,1520708559.012 [DataOverHttps](INFO): Sending 248 bytes from file Logs/20180310T051512/Express0325.lzma
2018-03-10T19:02:39.811Z,1520708559.811 [DataOverHttps](INFO): Moved sent file to Logs/20180310T051512/Express0325.lzma.bak
2018-03-10T19:02:39.811Z,1520708559.811 [DataOverHttps](INFO): SBD MOMSN=8007431
2018-03-10T19:02:40.929Z,1520708560.929 [Default:CheckIn:Read_Iridium] Stopped
2018-03-10T19:02:40.929Z,1520708560.929 [Default:CheckIn:C.Wait] Running Loop=1
2018-03-10T19:02:40.929Z,1520708560.929 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-03-10T19:02:53.708Z,1520708573.708 [NAL9602](INFO): Powering down
2018-03-10T19:03:52.354Z,1520708632.354 [BPC1](ERROR): Bank B: No match for stick 1 serial number:1717 in the onboard configuration file.
2018-03-10T19:03:52.354Z,1520708632.354 [BPC1](ERROR): Failed to parse Bank B battery data
2018-03-10T19:03:52.354Z,1520708632.354 [BPC1] Data Fault, FailCount= 1
2018-03-10T19:03:52.354Z,1520708632.354 [BPC1](ERROR): Data Fault
2018-03-10T19:03:52.378Z,1520708632.378 [CBIT](ERROR): Data Fault in component: BPC1
2018-03-10T19:03:53.614Z,1520708633.614 [CBIT](INFO): Clearing failed state for component BPC1
2018-03-10T19:03:53.623Z,1520708633.623 [BPC1] No Fault, FailCount= 1
2018-03-10T19:04:33.921Z,1520708673.921 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:04:34.344Z,1520708674.344 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:04:34.725Z,1520708674.725 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:04:35.113Z,1520708675.113 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:04:35.514Z,1520708675.514 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:04:35.915Z,1520708675.915 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:04:36.348Z,1520708676.348 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:04:36.713Z,1520708676.713 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:04:37.119Z,1520708677.119 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:04:37.517Z,1520708677.517 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:04:37.921Z,1520708677.921 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:04:38.325Z,1520708678.325 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:04:38.713Z,1520708678.713 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:04:39.113Z,1520708679.113 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:04:39.514Z,1520708679.514 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:04:39.956Z,1520708679.956 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:04:40.313Z,1520708680.313 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:04:40.712Z,1520708680.712 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:04:41.114Z,1520708681.114 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:04:41.518Z,1520708681.518 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:04:46.675Z,1520708686.675 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:04:46.845Z,1520708686.845 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:04:47.260Z,1520708687.260 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:04:47.651Z,1520708687.651 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:04:48.060Z,1520708688.060 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:04:48.440Z,1520708688.440 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:04:48.849Z,1520708688.849 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:04:49.247Z,1520708689.247 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:04:49.645Z,1520708689.645 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:04:50.038Z,1520708690.038 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:04:50.446Z,1520708690.446 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:04:50.846Z,1520708690.846 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:04:51.246Z,1520708691.246 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:04:51.645Z,1520708691.645 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:04:52.046Z,1520708692.046 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:04:52.450Z,1520708692.450 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:04:52.859Z,1520708692.859 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:04:53.245Z,1520708693.245 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:04:53.657Z,1520708693.657 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:04:54.062Z,1520708694.062 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:04:54.440Z,1520708694.440 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:04:54.847Z,1520708694.847 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:04:55.258Z,1520708695.258 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:04:55.648Z,1520708695.648 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:04:56.039Z,1520708696.039 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:04:56.437Z,1520708696.437 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:04:56.837Z,1520708696.837 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:04:57.239Z,1520708697.239 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:04:57.642Z,1520708697.642 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:04:58.046Z,1520708698.046 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:04:58.446Z,1520708698.446 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:04:58.848Z,1520708698.848 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:04:59.247Z,1520708699.247 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:04:59.646Z,1520708699.646 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:05:00.053Z,1520708700.053 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:05:00.439Z,1520708700.439 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:05:00.867Z,1520708700.867 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:05:01.275Z,1520708701.275 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:05:01.643Z,1520708701.643 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:05:02.048Z,1520708702.048 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:05:02.437Z,1520708702.437 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:05:02.839Z,1520708702.839 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:05:03.239Z,1520708703.239 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:05:03.639Z,1520708703.639 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:05:04.049Z,1520708704.049 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:05:04.444Z,1520708704.444 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:05:04.848Z,1520708704.848 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:05:05.252Z,1520708705.252 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:05:05.659Z,1520708705.659 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:05:06.040Z,1520708706.040 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:05:06.437Z,1520708706.437 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:05:06.838Z,1520708706.838 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:05:07.242Z,1520708707.242 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:05:07.645Z,1520708707.645 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:05:08.045Z,1520708708.045 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:05:08.460Z,1520708708.460 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:05:08.837Z,1520708708.837 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:05:09.237Z,1520708709.237 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:05:09.663Z,1520708709.663 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:05:10.038Z,1520708710.038 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:05:10.442Z,1520708710.442 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:05:10.850Z,1520708710.850 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:05:11.257Z,1520708711.257 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:05:11.637Z,1520708711.637 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:05:12.066Z,1520708712.066 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:05:12.438Z,1520708712.438 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:05:12.837Z,1520708712.837 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:05:13.236Z,1520708713.236 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:05:13.638Z,1520708713.638 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:05:14.042Z,1520708714.042 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:05:14.442Z,1520708714.442 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:05:14.848Z,1520708714.848 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:05:15.258Z,1520708715.258 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:05:15.656Z,1520708715.656 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:05:16.040Z,1520708716.040 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:05:16.447Z,1520708716.447 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:05:16.510Z,1520708716.510 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T19:05:16.510Z,1520708716.510 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 29
2018-03-10T19:05:16.510Z,1520708716.510 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-10T19:05:16.609Z,1520708716.609 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-10T19:05:16.846Z,1520708716.846 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:05:16.934Z,1520708716.934 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-10T19:05:16.934Z,1520708716.934 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 29
2018-03-10T19:05:17.238Z,1520708717.238 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:05:17.276Z,1520708717.276 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-10T19:05:17.277Z,1520708717.277 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-10T19:05:17.277Z,1520708717.277 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-10T19:05:17.637Z,1520708717.637 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:05:18.037Z,1520708718.037 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:05:18.437Z,1520708718.437 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:05:18.842Z,1520708718.842 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:05:19.246Z,1520708719.246 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:05:19.646Z,1520708719.646 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:05:20.045Z,1520708720.045 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:05:20.446Z,1520708720.446 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:05:20.845Z,1520708720.845 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:05:21.245Z,1520708721.245 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:05:21.657Z,1520708721.657 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:05:22.045Z,1520708722.045 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:05:22.445Z,1520708722.445 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:05:22.837Z,1520708722.837 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:05:23.237Z,1520708723.237 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:05:23.637Z,1520708723.637 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:05:24.037Z,1520708724.037 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:05:24.438Z,1520708724.438 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:05:24.839Z,1520708724.839 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:05:25.264Z,1520708725.264 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:05:25.643Z,1520708725.643 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:05:26.046Z,1520708726.046 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:05:26.469Z,1520708726.469 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:05:26.857Z,1520708726.857 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:05:27.265Z,1520708727.265 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:05:27.637Z,1520708727.637 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:05:28.048Z,1520708728.048 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:05:28.446Z,1520708728.446 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:05:28.845Z,1520708728.845 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:05:29.248Z,1520708729.248 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:05:29.659Z,1520708729.659 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:05:30.038Z,1520708730.038 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:05:30.447Z,1520708730.447 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:05:30.845Z,1520708730.845 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:05:31.237Z,1520708731.237 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:05:31.636Z,1520708731.636 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:05:32.064Z,1520708732.064 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:05:32.438Z,1520708732.438 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:05:32.839Z,1520708732.839 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:05:33.246Z,1520708733.246 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:05:33.649Z,1520708733.649 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:05:34.049Z,1520708734.049 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:05:34.447Z,1520708734.447 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:05:34.846Z,1520708734.846 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:05:35.254Z,1520708735.254 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:05:35.638Z,1520708735.638 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:05:36.037Z,1520708736.037 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:05:36.449Z,1520708736.449 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:05:36.838Z,1520708736.838 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:05:37.257Z,1520708737.257 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:05:37.648Z,1520708737.648 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:05:38.035Z,1520708738.035 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:05:38.438Z,1520708738.438 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:05:38.850Z,1520708738.850 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:05:39.247Z,1520708739.247 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:05:39.637Z,1520708739.637 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:05:40.049Z,1520708740.049 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:05:40.449Z,1520708740.449 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:05:40.838Z,1520708740.838 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:05:41.238Z,1520708741.238 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:05:41.655Z,1520708741.655 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:05:46.186Z,1520708746.186 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:05:46.220Z,1520708746.220 [CBIT](DEBUG): EFC running - data check-sum false
2018-03-10T19:05:46.304Z,1520708746.304 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:05:46.670Z,1520708746.670 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:05:47.069Z,1520708747.069 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:05:47.461Z,1520708747.461 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:05:47.853Z,1520708747.853 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:05:48.258Z,1520708748.258 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:05:48.664Z,1520708748.664 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:05:49.063Z,1520708749.063 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:05:49.462Z,1520708749.462 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:05:49.862Z,1520708749.862 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:05:50.290Z,1520708750.290 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:05:50.653Z,1520708750.653 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:05:51.107Z,1520708751.107 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:05:51.492Z,1520708751.492 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:05:51.901Z,1520708751.901 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:05:52.263Z,1520708752.263 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:05:52.663Z,1520708752.663 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:05:53.063Z,1520708753.063 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:05:53.465Z,1520708753.465 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:05:53.893Z,1520708753.893 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:05:54.263Z,1520708754.263 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:05:54.672Z,1520708754.672 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:05:55.080Z,1520708755.080 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:05:55.454Z,1520708755.454 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:05:55.855Z,1520708755.855 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:05:56.254Z,1520708756.254 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:05:56.684Z,1520708756.684 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:05:57.069Z,1520708757.069 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:05:57.467Z,1520708757.467 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:05:57.857Z,1520708757.857 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:05:58.273Z,1520708758.273 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:05:58.663Z,1520708758.663 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:05:59.064Z,1520708759.064 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:05:59.470Z,1520708759.470 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:05:59.863Z,1520708759.863 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:06:00.290Z,1520708760.290 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:06:00.658Z,1520708760.658 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:06:01.054Z,1520708761.054 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:06:01.473Z,1520708761.473 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:06:01.862Z,1520708761.862 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:06:02.282Z,1520708762.282 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:06:02.663Z,1520708762.663 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:06:03.061Z,1520708763.061 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:06:03.454Z,1520708763.454 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:06:03.869Z,1520708763.869 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:06:04.290Z,1520708764.290 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:06:04.668Z,1520708764.668 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:06:05.058Z,1520708765.058 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:06:05.466Z,1520708765.466 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:06:05.865Z,1520708765.865 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:06:06.262Z,1520708766.262 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:06:06.662Z,1520708766.662 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:06:07.064Z,1520708767.064 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:06:07.468Z,1520708767.468 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:06:07.853Z,1520708767.853 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:06:08.253Z,1520708768.253 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:06:08.665Z,1520708768.665 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:06:09.073Z,1520708769.073 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:06:09.457Z,1520708769.457 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:06:09.857Z,1520708769.857 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:06:10.262Z,1520708770.262 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:06:10.666Z,1520708770.666 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:06:11.060Z,1520708771.060 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:06:11.453Z,1520708771.453 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:06:11.853Z,1520708771.853 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:06:12.252Z,1520708772.252 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:06:12.653Z,1520708772.653 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:06:13.062Z,1520708773.062 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:06:13.466Z,1520708773.466 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:06:13.861Z,1520708773.861 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:06:14.261Z,1520708774.261 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:06:14.661Z,1520708774.661 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:06:15.053Z,1520708775.053 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:06:15.474Z,1520708775.474 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:06:15.853Z,1520708775.853 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:06:16.253Z,1520708776.253 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:06:16.653Z,1520708776.653 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:06:17.086Z,1520708777.086 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:06:17.490Z,1520708777.490 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:06:17.879Z,1520708777.879 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:06:18.289Z,1520708778.289 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:06:18.669Z,1520708778.669 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:06:19.062Z,1520708779.062 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:06:19.463Z,1520708779.463 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:06:19.862Z,1520708779.862 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:06:20.265Z,1520708780.265 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:06:20.653Z,1520708780.653 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:06:21.055Z,1520708781.055 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:06:21.453Z,1520708781.453 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:06:21.854Z,1520708781.854 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:06:22.254Z,1520708782.254 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:06:22.662Z,1520708782.662 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:06:23.062Z,1520708783.062 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:06:23.461Z,1520708783.461 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:06:23.876Z,1520708783.876 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:06:24.261Z,1520708784.261 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:06:24.653Z,1520708784.653 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:06:25.075Z,1520708785.075 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:06:25.464Z,1520708785.464 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:06:25.853Z,1520708785.853 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:06:26.255Z,1520708786.255 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:06:26.654Z,1520708786.654 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:06:27.057Z,1520708787.057 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:06:27.454Z,1520708787.454 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:06:27.862Z,1520708787.862 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:06:28.263Z,1520708788.263 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:06:28.662Z,1520708788.662 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:06:29.061Z,1520708789.061 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:06:29.461Z,1520708789.461 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:06:29.869Z,1520708789.869 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:06:30.257Z,1520708790.257 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:06:30.653Z,1520708790.653 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:06:31.054Z,1520708791.054 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:06:31.454Z,1520708791.454 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:06:31.855Z,1520708791.855 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:06:32.258Z,1520708792.258 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:06:32.658Z,1520708792.658 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:06:33.058Z,1520708793.058 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:06:33.477Z,1520708793.477 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:06:33.872Z,1520708793.872 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:06:34.263Z,1520708794.263 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:06:34.662Z,1520708794.662 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:06:35.064Z,1520708795.064 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:06:35.461Z,1520708795.461 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:06:35.863Z,1520708795.863 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:06:36.273Z,1520708796.273 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:06:36.665Z,1520708796.665 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:06:37.053Z,1520708797.053 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:06:37.453Z,1520708797.453 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:06:37.853Z,1520708797.853 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:06:38.254Z,1520708798.254 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:06:38.653Z,1520708798.653 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:06:39.070Z,1520708799.070 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:06:39.472Z,1520708799.472 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:06:39.862Z,1520708799.862 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:06:40.272Z,1520708800.272 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:06:40.663Z,1520708800.663 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:06:41.061Z,1520708801.061 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:06:41.479Z,1520708801.479 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:06:41.861Z,1520708801.861 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:06:47.259Z,1520708807.259 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:06:47.456Z,1520708807.456 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:06:47.842Z,1520708807.842 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:06:48.239Z,1520708808.239 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:06:48.641Z,1520708808.641 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:06:49.034Z,1520708809.034 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:06:49.445Z,1520708809.445 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:06:49.831Z,1520708809.831 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:06:50.256Z,1520708810.256 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:06:50.657Z,1520708810.657 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:06:51.035Z,1520708811.035 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:06:51.438Z,1520708811.438 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:06:51.842Z,1520708811.842 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:06:52.242Z,1520708812.242 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:06:52.637Z,1520708812.637 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:06:53.039Z,1520708813.039 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:06:53.457Z,1520708813.457 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:06:53.832Z,1520708813.832 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:06:54.230Z,1520708814.230 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:06:54.629Z,1520708814.629 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:06:55.032Z,1520708815.032 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:06:55.433Z,1520708815.433 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:06:55.866Z,1520708815.866 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:06:56.258Z,1520708816.258 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:06:56.634Z,1520708816.634 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:06:57.044Z,1520708817.044 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:06:57.434Z,1520708817.434 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:06:57.839Z,1520708817.839 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:06:58.251Z,1520708818.251 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:06:58.638Z,1520708818.638 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:06:59.033Z,1520708819.033 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:06:59.429Z,1520708819.429 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:06:59.832Z,1520708819.832 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:07:00.238Z,1520708820.238 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:07:00.638Z,1520708820.638 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:07:01.038Z,1520708821.038 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:07:01.449Z,1520708821.449 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:07:01.841Z,1520708821.841 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:07:02.237Z,1520708822.237 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:07:02.646Z,1520708822.646 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:07:03.031Z,1520708823.031 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:07:03.449Z,1520708823.449 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:07:03.830Z,1520708823.830 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:07:04.241Z,1520708824.241 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:07:04.634Z,1520708824.634 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:07:05.040Z,1520708825.040 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:07:05.438Z,1520708825.438 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:07:05.841Z,1520708825.841 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:07:06.241Z,1520708826.241 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:07:06.640Z,1520708826.640 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:07:07.038Z,1520708827.038 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:07:07.429Z,1520708827.429 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:07:07.833Z,1520708827.833 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:07:08.231Z,1520708828.231 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:07:08.629Z,1520708828.629 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:07:09.035Z,1520708829.035 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:07:09.439Z,1520708829.439 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:07:09.845Z,1520708829.845 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:07:10.248Z,1520708830.248 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:07:10.640Z,1520708830.640 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:07:11.041Z,1520708831.041 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:07:11.440Z,1520708831.440 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:07:11.840Z,1520708831.840 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:07:12.248Z,1520708832.248 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:07:12.640Z,1520708832.640 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:07:13.042Z,1520708833.042 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:07:13.431Z,1520708833.431 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:07:13.831Z,1520708833.831 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:07:14.232Z,1520708834.232 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:07:14.633Z,1520708834.633 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:07:15.041Z,1520708835.041 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:07:15.437Z,1520708835.437 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:07:15.841Z,1520708835.841 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:07:16.241Z,1520708836.241 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:07:16.640Z,1520708836.640 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:07:17.038Z,1520708837.038 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:07:17.456Z,1520708837.456 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:07:17.842Z,1520708837.842 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:07:18.230Z,1520708838.230 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:07:18.635Z,1520708838.635 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:07:19.041Z,1520708839.041 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:07:19.445Z,1520708839.445 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:07:19.879Z,1520708839.879 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:07:20.240Z,1520708840.240 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:07:20.642Z,1520708840.642 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:07:21.039Z,1520708841.039 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:07:21.438Z,1520708841.438 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:07:21.837Z,1520708841.837 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:07:22.247Z,1520708842.247 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:07:22.642Z,1520708842.642 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:07:23.037Z,1520708843.037 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:07:23.437Z,1520708843.437 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:07:23.857Z,1520708843.857 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:07:24.251Z,1520708844.251 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:07:24.630Z,1520708844.630 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:07:25.044Z,1520708845.044 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:07:25.443Z,1520708845.443 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:07:25.842Z,1520708845.842 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:07:26.238Z,1520708846.238 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:07:26.641Z,1520708846.641 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:07:27.041Z,1520708847.041 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:07:27.450Z,1520708847.450 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:07:27.846Z,1520708847.846 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:07:28.231Z,1520708848.231 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:07:28.633Z,1520708848.633 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:07:29.038Z,1520708849.038 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:07:29.434Z,1520708849.434 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:07:29.832Z,1520708849.832 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:07:30.250Z,1520708850.250 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:07:30.641Z,1520708850.641 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:07:31.029Z,1520708851.029 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:07:31.446Z,1520708851.446 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:07:31.860Z,1520708851.860 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:07:32.262Z,1520708852.262 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:07:32.629Z,1520708852.629 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:07:33.030Z,1520708853.030 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:07:33.441Z,1520708853.441 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:07:33.851Z,1520708853.851 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:07:34.239Z,1520708854.239 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:07:34.637Z,1520708854.637 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:07:35.042Z,1520708855.042 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:07:35.432Z,1520708855.432 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:07:35.831Z,1520708855.831 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:07:41.460Z,1520708861.460 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-03-10T19:07:41.460Z,1520708861.460 [Default:CheckIn:C.Wait] Stopped
2018-03-10T19:07:41.460Z,1520708861.460 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-03-10T19:07:41.460Z,1520708861.460 [Default:CheckIn:D] Running Loop=1
2018-03-10T19:07:41.925Z,1520708861.925 [Default:CheckIn:D] Stopped
2018-03-10T19:07:41.925Z,1520708861.925 [Default:CheckIn:E] Running Loop=1
2018-03-10T19:07:42.267Z,1520708862.267 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 828.400065 min 
2018-03-10T19:07:42.267Z,1520708862.267 [Default:CheckIn:E] Stopped
2018-03-10T19:07:42.267Z,1520708862.267 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-03-10T19:07:42.267Z,1520708862.267 [Default:CheckIn] Stopped
2018-03-10T19:07:42.267Z,1520708862.267 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-03-10T19:07:42.268Z,1520708862.268 [Default:CheckIn](INFO): Running loop #82
2018-03-10T19:07:42.268Z,1520708862.268 [Default:CheckIn] Running Loop=82
2018-03-10T19:07:42.268Z,1520708862.268 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-03-10T19:07:42.268Z,1520708862.268 [Default:CheckIn:Read_GPS] Running Loop=1
2018-03-10T19:07:47.090Z,1520708867.090 [NAL9602](INFO): Powering up
2018-03-10T19:07:58.244Z,1520708878.244 [NAL9602](INFO): NAL9602 initialized
2018-03-10T19:08:17.492Z,1520708897.492 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T19:08:17.492Z,1520708897.492 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 30
2018-03-10T19:08:17.492Z,1520708897.492 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-10T19:08:17.506Z,1520708897.506 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-10T19:08:17.976Z,1520708897.976 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-10T19:08:17.976Z,1520708897.976 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 30
2018-03-10T19:08:18.301Z,1520708898.301 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-10T19:08:18.301Z,1520708898.301 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-10T19:08:18.301Z,1520708898.301 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-10T19:08:27.063Z,1520708907.063 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:08:27.466Z,1520708907.466 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:08:27.867Z,1520708907.867 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:08:29.488Z,1520708909.488 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:08:29.865Z,1520708909.865 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:08:30.297Z,1520708910.297 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:08:30.663Z,1520708910.663 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:08:31.081Z,1520708911.081 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:08:31.486Z,1520708911.486 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:08:31.868Z,1520708911.868 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:08:32.271Z,1520708912.271 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:08:32.680Z,1520708912.680 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:08:33.075Z,1520708913.075 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:08:33.461Z,1520708913.461 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:08:33.886Z,1520708913.886 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:08:34.261Z,1520708914.261 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:08:34.660Z,1520708914.660 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:08:35.094Z,1520708915.094 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:08:35.461Z,1520708915.461 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:08:35.895Z,1520708915.895 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:08:36.299Z,1520708916.299 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:08:36.676Z,1520708916.676 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:08:37.098Z,1520708917.098 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:08:37.502Z,1520708917.502 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:08:37.867Z,1520708917.867 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:08:38.282Z,1520708918.282 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:08:38.678Z,1520708918.678 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:08:39.073Z,1520708919.073 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:08:39.473Z,1520708919.473 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:08:39.885Z,1520708919.885 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:08:40.293Z,1520708920.293 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:08:40.689Z,1520708920.689 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:08:41.063Z,1520708921.063 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:08:41.470Z,1520708921.470 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:08:41.871Z,1520708921.871 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:08:42.278Z,1520708922.278 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:08:42.671Z,1520708922.671 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:08:43.079Z,1520708923.079 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:08:43.473Z,1520708923.473 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:08:43.878Z,1520708923.878 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:08:49.296Z,1520708929.296 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:08:49.447Z,1520708929.447 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:08:49.817Z,1520708929.817 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:08:50.210Z,1520708930.210 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:08:50.624Z,1520708930.624 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:08:51.013Z,1520708931.013 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:08:51.420Z,1520708931.420 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:08:51.813Z,1520708931.813 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:08:52.201Z,1520708932.201 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:08:52.634Z,1520708932.634 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:08:53.022Z,1520708933.022 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:08:53.419Z,1520708933.419 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:08:53.828Z,1520708933.828 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:08:54.230Z,1520708934.230 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:08:54.628Z,1520708934.628 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:08:55.032Z,1520708935.032 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:08:55.407Z,1520708935.407 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:08:55.813Z,1520708935.813 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:08:56.215Z,1520708936.215 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:08:56.609Z,1520708936.609 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:08:57.428Z,1520708937.428 [BPC1](ERROR): Failed to receive battery data
2018-03-10T19:08:57.428Z,1520708937.428 [BPC1] Communications Fault, FailCount= 1
2018-03-10T19:08:57.428Z,1520708937.428 [BPC1](ERROR): Communications Fault
2018-03-10T19:08:57.477Z,1520708937.477 [CBIT](ERROR): Communications Fault in component: BPC1
2018-03-10T19:08:58.661Z,1520708938.661 [CBIT](INFO): Clearing failed state for component BPC1
2018-03-10T19:08:58.661Z,1520708938.661 [BPC1] No Fault, FailCount= 1
2018-03-10T19:09:29.418Z,1520708969.418 [BPC1](FAULT): Failed to initialize
2018-03-10T19:09:29.418Z,1520708969.418 [BPC1] Communications Fault, FailCount= 2
2018-03-10T19:09:29.418Z,1520708969.418 [BPC1](ERROR): Communications Fault
2018-03-10T19:09:29.470Z,1520708969.470 [CBIT](ERROR): Communications Fault in component: BPC1
2018-03-10T19:09:30.666Z,1520708970.666 [CBIT](INFO): Clearing failed state for component BPC1
2018-03-10T19:09:30.666Z,1520708970.666 [BPC1] No Fault, FailCount= 2
2018-03-10T19:09:47.240Z,1520708987.240 [NAL9602](INFO): SBD MO Status=0, MOMSN=5840, MT Status=0, MTMSN=0
2018-03-10T19:09:47.240Z,1520708987.240 [NAL9602](INFO): No messages in MT queue
2018-03-10T19:09:47.240Z,1520708987.240 [NAL9602](INFO): Failure count cleared after critical for NAL9602
2018-03-10T19:09:47.774Z,1520708987.774 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-03-10T19:09:47.774Z,1520708987.774 [NAL9602] Data Fault, FailCount= 1
2018-03-10T19:09:47.774Z,1520708987.774 [NAL9602](ERROR): Data Fault
2018-03-10T19:09:47.918Z,1520708987.918 [CBIT](ERROR): Data Fault in component: NAL9602
2018-03-10T19:09:48.160Z,1520708988.160 [NAL9602](INFO): Powering down
2018-03-10T19:09:49.062Z,1520708989.062 [CBIT](INFO): Clearing failed state for component NAL9602
2018-03-10T19:09:49.062Z,1520708989.062 [NAL9602] No Fault, FailCount= 1
2018-03-10T19:10:01.407Z,1520709001.407 [BPC1](FAULT): Failed to initialize
2018-03-10T19:10:01.408Z,1520709001.408 [BPC1] Communications Fault, FailCount= 3
2018-03-10T19:10:01.408Z,1520709001.408 [BPC1](ERROR): Communications Fault
2018-03-10T19:10:01.503Z,1520709001.503 [CBIT](ERROR): Communications Fault in component: BPC1
2018-03-10T19:10:02.678Z,1520709002.678 [CBIT](INFO): Clearing failed state for component BPC1
2018-03-10T19:10:02.678Z,1520709002.678 [BPC1] No Fault, FailCount= 3
2018-03-10T19:10:09.420Z,1520709009.420 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:10:09.811Z,1520709009.811 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:10:10.199Z,1520709010.199 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:10:10.609Z,1520709010.609 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:10:11.022Z,1520709011.022 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:10:11.387Z,1520709011.387 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:10:11.798Z,1520709011.798 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:10:12.209Z,1520709012.209 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:10:12.601Z,1520709012.601 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:10:12.995Z,1520709012.995 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:10:13.389Z,1520709013.389 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:10:13.793Z,1520709013.793 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:10:14.193Z,1520709014.193 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:10:14.591Z,1520709014.591 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:10:14.977Z,1520709014.977 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:10:15.376Z,1520709015.376 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:10:15.777Z,1520709015.777 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:10:16.222Z,1520709016.222 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:10:16.605Z,1520709016.605 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:10:16.994Z,1520709016.994 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:10:17.409Z,1520709017.409 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:10:17.815Z,1520709017.815 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:10:18.184Z,1520709018.184 [NAL9602](INFO): Powering up NAL9602
2018-03-10T19:10:18.212Z,1520709018.212 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:10:18.603Z,1520709018.603 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:10:18.994Z,1520709018.994 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:10:19.421Z,1520709019.421 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:10:19.795Z,1520709019.795 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:10:29.360Z,1520709029.360 [NAL9602](INFO): NAL9602 initialized
2018-03-10T19:10:33.405Z,1520709033.405 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:10:33.424Z,1520709033.424 [BPC1](FAULT): Failed to initialize
2018-03-10T19:10:33.424Z,1520709033.424 [BPC1] Communications Fault, FailCount= 4
2018-03-10T19:10:33.424Z,1520709033.424 [BPC1](ERROR): Communications Fault
2018-03-10T19:10:33.448Z,1520709033.448 [CBIT](ERROR): Communications Fault in component: BPC1
2018-03-10T19:10:33.813Z,1520709033.813 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:10:34.192Z,1520709034.192 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:10:34.593Z,1520709034.593 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:10:34.653Z,1520709034.653 [CBIT](INFO): Clearing failed state for component BPC1
2018-03-10T19:10:34.653Z,1520709034.653 [BPC1] No Fault, FailCount= 4
2018-03-10T19:10:34.996Z,1520709034.996 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:10:35.384Z,1520709035.384 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:10:35.778Z,1520709035.778 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:10:36.190Z,1520709036.190 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:10:36.625Z,1520709036.625 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:10:58.714Z,1520709058.714 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:10:59.124Z,1520709059.124 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:10:59.525Z,1520709059.525 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:11:01.165Z,1520709061.165 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:11:01.523Z,1520709061.523 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:11:01.920Z,1520709061.920 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:11:02.311Z,1520709062.311 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:11:02.710Z,1520709062.710 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:11:03.123Z,1520709063.123 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:11:03.501Z,1520709063.501 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:11:03.923Z,1520709063.923 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:11:04.325Z,1520709064.325 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:11:04.721Z,1520709064.721 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:11:05.101Z,1520709065.101 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:11:05.501Z,1520709065.501 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:11:05.918Z,1520709065.918 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:11:06.313Z,1520709066.313 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:11:06.716Z,1520709066.716 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:11:07.141Z,1520709067.141 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:11:07.512Z,1520709067.512 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:11:07.905Z,1520709067.905 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:11:08.303Z,1520709068.303 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:11:08.721Z,1520709068.721 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:11:09.122Z,1520709069.122 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:11:09.520Z,1520709069.520 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:11:09.912Z,1520709069.912 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:11:10.310Z,1520709070.310 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:11:10.712Z,1520709070.712 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:11:11.113Z,1520709071.113 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:11:11.502Z,1520709071.502 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:11:13.102Z,1520709073.102 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:11:13.511Z,1520709073.511 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:11:13.918Z,1520709073.918 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:11:14.319Z,1520709074.319 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:11:14.723Z,1520709074.723 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:11:15.120Z,1520709075.120 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:11:15.501Z,1520709075.501 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:11:15.914Z,1520709075.914 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:11:16.302Z,1520709076.302 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:11:16.703Z,1520709076.703 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:11:17.120Z,1520709077.120 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:11:17.516Z,1520709077.516 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:11:17.922Z,1520709077.922 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:11:18.312Z,1520709078.312 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:11:18.382Z,1520709078.382 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T19:11:18.382Z,1520709078.382 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 31
2018-03-10T19:11:18.382Z,1520709078.382 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-10T19:11:18.429Z,1520709078.429 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-10T19:11:18.710Z,1520709078.710 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:11:18.776Z,1520709078.776 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-10T19:11:18.776Z,1520709078.776 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 31
2018-03-10T19:11:19.134Z,1520709079.134 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:11:19.181Z,1520709079.181 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-10T19:11:19.182Z,1520709079.182 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-10T19:11:19.182Z,1520709079.182 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-10T19:11:19.508Z,1520709079.508 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:11:19.919Z,1520709079.919 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:11:20.320Z,1520709080.320 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:11:20.721Z,1520709080.721 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:11:21.131Z,1520709081.131 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:11:21.501Z,1520709081.501 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:11:21.901Z,1520709081.901 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:11:22.302Z,1520709082.302 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:11:22.701Z,1520709082.701 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:11:23.134Z,1520709083.134 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:11:23.520Z,1520709083.520 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:11:23.920Z,1520709083.920 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:11:24.310Z,1520709084.310 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:11:24.710Z,1520709084.710 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:11:25.118Z,1520709085.118 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:11:25.510Z,1520709085.510 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:11:25.915Z,1520709085.915 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:11:26.328Z,1520709086.328 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:11:26.720Z,1520709086.720 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:11:27.101Z,1520709087.101 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:11:27.502Z,1520709087.502 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:11:27.932Z,1520709087.932 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:11:28.315Z,1520709088.315 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:11:28.711Z,1520709088.711 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:11:29.112Z,1520709089.112 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:11:29.529Z,1520709089.529 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:11:29.912Z,1520709089.912 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:11:30.338Z,1520709090.338 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:11:30.703Z,1520709090.703 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:11:31.102Z,1520709091.102 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:11:31.505Z,1520709091.505 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:11:31.901Z,1520709091.901 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:11:32.322Z,1520709092.322 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:11:32.726Z,1520709092.726 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:11:33.114Z,1520709093.114 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:11:33.507Z,1520709093.507 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:11:33.920Z,1520709093.920 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:11:34.312Z,1520709094.312 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:11:34.711Z,1520709094.711 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:11:35.119Z,1520709095.119 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:11:35.521Z,1520709095.521 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:11:35.921Z,1520709095.921 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:11:36.301Z,1520709096.301 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:11:36.701Z,1520709096.701 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:11:37.101Z,1520709097.101 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:11:37.505Z,1520709097.505 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:11:37.901Z,1520709097.901 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:11:38.312Z,1520709098.312 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:11:38.744Z,1520709098.744 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:11:39.120Z,1520709099.120 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:11:39.514Z,1520709099.514 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:11:39.907Z,1520709099.907 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:11:40.318Z,1520709100.318 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:11:40.717Z,1520709100.717 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:11:41.114Z,1520709101.114 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:11:41.520Z,1520709101.520 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:11:41.919Z,1520709101.919 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:11:42.301Z,1520709102.301 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:11:42.702Z,1520709102.702 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:11:43.101Z,1520709103.101 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:11:48.857Z,1520709108.857 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:11:49.027Z,1520709109.027 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:11:49.434Z,1520709109.434 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:11:49.833Z,1520709109.833 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:11:50.235Z,1520709110.235 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:11:50.615Z,1520709110.615 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:11:51.014Z,1520709111.014 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:11:51.414Z,1520709111.414 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:11:51.851Z,1520709111.851 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:11:52.239Z,1520709112.239 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:11:52.625Z,1520709112.625 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:11:53.022Z,1520709113.022 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:11:53.421Z,1520709113.421 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:11:53.836Z,1520709113.836 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:11:54.231Z,1520709114.231 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:11:54.624Z,1520709114.624 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:11:55.033Z,1520709115.033 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:11:55.437Z,1520709115.437 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:11:55.837Z,1520709115.837 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:11:56.215Z,1520709116.215 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:11:56.615Z,1520709116.615 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:11:57.017Z,1520709117.017 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:11:57.413Z,1520709117.413 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:11:57.826Z,1520709117.826 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:11:58.235Z,1520709118.235 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:11:58.636Z,1520709118.636 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:11:59.024Z,1520709119.024 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:11:59.425Z,1520709119.425 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:11:59.826Z,1520709119.826 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:12:00.227Z,1520709120.227 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:12:00.613Z,1520709120.613 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:12:01.035Z,1520709121.035 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:12:01.452Z,1520709121.452 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:12:01.847Z,1520709121.847 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:12:02.218Z,1520709122.218 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:12:02.624Z,1520709122.624 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:12:03.021Z,1520709123.021 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:12:03.425Z,1520709123.425 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:12:03.831Z,1520709123.831 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:12:04.236Z,1520709124.236 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:12:04.634Z,1520709124.634 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:12:05.034Z,1520709125.034 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:12:05.413Z,1520709125.413 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:12:05.844Z,1520709125.844 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:12:06.218Z,1520709126.218 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:12:06.624Z,1520709126.624 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:12:07.034Z,1520709127.034 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:12:07.439Z,1520709127.439 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:12:07.826Z,1520709127.826 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:12:08.230Z,1520709128.230 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:12:08.634Z,1520709128.634 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:12:09.023Z,1520709129.023 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:12:09.425Z,1520709129.425 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:12:09.846Z,1520709129.846 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:12:10.231Z,1520709130.231 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:12:10.629Z,1520709130.629 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:12:11.020Z,1520709131.020 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:12:11.426Z,1520709131.426 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:12:11.825Z,1520709131.825 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:12:12.225Z,1520709132.225 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:12:12.625Z,1520709132.625 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:12:13.030Z,1520709133.030 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:12:13.442Z,1520709133.442 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:12:13.835Z,1520709133.835 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:12:14.215Z,1520709134.215 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:12:14.615Z,1520709134.615 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:12:15.045Z,1520709135.045 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:12:15.418Z,1520709135.418 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:12:15.832Z,1520709135.832 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:12:16.257Z,1520709136.257 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:12:16.628Z,1520709136.628 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:12:17.026Z,1520709137.026 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:12:17.437Z,1520709137.437 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:12:17.817Z,1520709137.817 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:12:18.214Z,1520709138.214 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:12:18.614Z,1520709138.614 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:12:19.051Z,1520709139.051 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:12:19.429Z,1520709139.429 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:12:19.832Z,1520709139.832 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:12:20.223Z,1520709140.223 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:12:20.626Z,1520709140.626 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:12:21.030Z,1520709141.030 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:12:21.422Z,1520709141.422 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:12:21.829Z,1520709141.829 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:12:22.235Z,1520709142.235 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:12:22.635Z,1520709142.635 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:12:23.014Z,1520709143.014 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:12:23.427Z,1520709143.427 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:12:23.815Z,1520709143.815 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:12:24.217Z,1520709144.217 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:12:24.613Z,1520709144.613 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:12:25.059Z,1520709145.059 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:12:25.428Z,1520709145.428 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:12:25.841Z,1520709145.841 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:12:26.218Z,1520709146.218 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:12:26.625Z,1520709146.625 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:12:27.027Z,1520709147.027 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:12:27.424Z,1520709147.424 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:12:27.840Z,1520709147.840 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:12:28.241Z,1520709148.241 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:12:28.625Z,1520709148.625 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:12:29.017Z,1520709149.017 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:12:29.413Z,1520709149.413 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:12:29.814Z,1520709149.814 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:12:30.227Z,1520709150.227 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:12:30.622Z,1520709150.622 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:12:31.037Z,1520709151.037 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:12:31.437Z,1520709151.437 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:12:31.844Z,1520709151.844 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:12:32.223Z,1520709152.223 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:12:32.626Z,1520709152.626 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:12:33.028Z,1520709153.028 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:12:33.418Z,1520709153.418 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:12:33.838Z,1520709153.838 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:12:34.233Z,1520709154.233 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:12:34.626Z,1520709154.626 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:12:35.027Z,1520709155.027 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:12:35.417Z,1520709155.417 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:12:35.829Z,1520709155.829 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:12:36.218Z,1520709156.218 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:12:36.623Z,1520709156.623 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:12:37.028Z,1520709157.028 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:12:37.432Z,1520709157.432 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:12:37.843Z,1520709157.843 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:12:38.224Z,1520709158.224 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:12:38.625Z,1520709158.625 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:12:39.015Z,1520709159.015 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:12:39.445Z,1520709159.445 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:12:39.828Z,1520709159.828 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:12:40.248Z,1520709160.248 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:12:40.638Z,1520709160.638 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:12:41.025Z,1520709161.025 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:12:41.427Z,1520709161.427 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:12:41.832Z,1520709161.832 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:12:42.225Z,1520709162.225 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:12:42.627Z,1520709162.627 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:12:42.681Z,1520709162.681 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-03-10T19:07:42.3Z
2018-03-10T19:12:42.681Z,1520709162.681 [Default:CheckIn:Read_GPS] Stopped
2018-03-10T19:12:42.682Z,1520709162.682 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-03-10T19:12:43.036Z,1520709163.036 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:12:43.945Z,1520709163.945 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:12:44.078Z,1520709164.078 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:12:49.425Z,1520709169.425 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:12:49.562Z,1520709169.562 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20180310T051512/Courier0328.lzma
2018-03-10T19:12:49.595Z,1520709169.595 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:12:49.979Z,1520709169.979 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:12:50.350Z,1520709170.350 [DataOverHttps](INFO): Moved sent file to Logs/20180310T051512/Courier0328.lzma.bak
2018-03-10T19:12:50.350Z,1520709170.350 [DataOverHttps](INFO): SBD MOMSN=8007518
2018-03-10T19:12:50.395Z,1520709170.395 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:12:51.331Z,1520709171.331 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:12:51.492Z,1520709171.492 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:12:59.069Z,1520709179.069 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:12:59.214Z,1520709179.214 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:12:59.607Z,1520709179.607 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:12:59.997Z,1520709179.997 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:13:00.401Z,1520709180.401 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:13:00.799Z,1520709180.799 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:13:01.227Z,1520709181.227 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:13:06.599Z,1520709186.599 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:13:06.779Z,1520709186.779 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:13:07.147Z,1520709187.147 [DataOverHttps](INFO): Sending 194 bytes from file Logs/20180310T051512/Express0329.lzma
2018-03-10T19:13:07.183Z,1520709187.183 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:13:07.591Z,1520709187.591 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:13:07.946Z,1520709187.946 [DataOverHttps](INFO): Moved sent file to Logs/20180310T051512/Express0329.lzma.bak
2018-03-10T19:13:07.946Z,1520709187.946 [DataOverHttps](INFO): SBD MOMSN=8007520
2018-03-10T19:13:07.981Z,1520709187.981 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:13:08.703Z,1520709188.703 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:13:08.749Z,1520709188.749 [Default:CheckIn:Read_Iridium] Stopped
2018-03-10T19:13:08.749Z,1520709188.749 [Default:CheckIn:C.Wait] Running Loop=1
2018-03-10T19:13:08.749Z,1520709188.749 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-03-10T19:13:08.844Z,1520709188.844 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:13:09.243Z,1520709189.243 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:13:09.630Z,1520709189.630 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:13:10.030Z,1520709190.030 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:13:10.458Z,1520709190.458 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:13:10.830Z,1520709190.830 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:13:14.790Z,1520709194.790 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:13:14.933Z,1520709194.933 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:13:15.318Z,1520709195.318 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:13:15.728Z,1520709195.728 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:13:16.110Z,1520709196.110 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:13:16.505Z,1520709196.505 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:13:16.907Z,1520709196.907 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:13:17.305Z,1520709197.305 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:13:17.741Z,1520709197.741 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:13:18.110Z,1520709198.110 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:13:18.511Z,1520709198.511 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:13:18.913Z,1520709198.913 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:13:19.321Z,1520709199.321 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:13:19.688Z,1520709199.688 [NAL9602](INFO): Powering down
2018-03-10T19:13:19.722Z,1520709199.722 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:13:20.113Z,1520709200.113 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:13:20.516Z,1520709200.516 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:13:20.921Z,1520709200.921 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:13:21.312Z,1520709201.312 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:13:21.715Z,1520709201.715 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:13:22.106Z,1520709202.106 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:13:22.510Z,1520709202.510 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:13:22.910Z,1520709202.910 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:13:23.315Z,1520709203.315 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:13:23.723Z,1520709203.723 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:13:24.131Z,1520709204.131 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:13:24.546Z,1520709204.546 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:13:24.905Z,1520709204.905 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:13:25.324Z,1520709205.324 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:13:25.713Z,1520709205.713 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:13:26.115Z,1520709206.115 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:13:26.505Z,1520709206.505 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:13:26.907Z,1520709206.907 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:13:27.305Z,1520709207.305 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:13:27.706Z,1520709207.706 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:13:28.105Z,1520709208.105 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:13:28.527Z,1520709208.527 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:13:28.930Z,1520709208.930 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:13:29.305Z,1520709209.305 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:13:29.705Z,1520709209.705 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:13:30.107Z,1520709210.107 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:13:30.504Z,1520709210.504 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:13:30.909Z,1520709210.909 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:13:31.337Z,1520709211.337 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:13:31.705Z,1520709211.705 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:13:32.112Z,1520709212.112 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:13:32.505Z,1520709212.505 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:13:32.905Z,1520709212.905 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:13:33.307Z,1520709213.307 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:13:33.721Z,1520709213.721 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:13:34.143Z,1520709214.143 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:13:34.536Z,1520709214.536 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:13:34.909Z,1520709214.909 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:13:35.307Z,1520709215.307 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:13:35.715Z,1520709215.715 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:13:36.113Z,1520709216.113 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:13:36.515Z,1520709216.515 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:13:36.927Z,1520709216.927 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:13:37.314Z,1520709217.314 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:13:37.705Z,1520709217.705 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:13:38.106Z,1520709218.106 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:13:38.513Z,1520709218.513 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:13:38.935Z,1520709218.935 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:14:19.442Z,1520709259.442 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T19:14:19.442Z,1520709259.442 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 32
2018-03-10T19:14:19.442Z,1520709259.442 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-10T19:14:19.476Z,1520709259.476 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-10T19:14:19.880Z,1520709259.880 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-10T19:14:19.880Z,1520709259.880 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 32
2018-03-10T19:14:20.250Z,1520709260.250 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-10T19:14:20.250Z,1520709260.250 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-10T19:14:20.251Z,1520709260.251 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-10T19:14:43.839Z,1520709283.839 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:14:44.202Z,1520709284.202 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:14:44.600Z,1520709284.600 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:14:45.033Z,1520709285.033 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:14:45.414Z,1520709285.414 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:14:45.804Z,1520709285.804 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:14:46.223Z,1520709286.223 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:14:46.625Z,1520709286.625 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:14:47.010Z,1520709287.010 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:14:47.409Z,1520709287.409 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:14:47.813Z,1520709287.813 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:14:48.203Z,1520709288.203 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:14:48.601Z,1520709288.601 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:14:49.024Z,1520709289.024 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:14:49.443Z,1520709289.443 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:14:49.827Z,1520709289.827 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:14:50.202Z,1520709290.202 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:14:50.604Z,1520709290.604 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:14:51.002Z,1520709291.002 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:14:51.414Z,1520709291.414 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:14:51.813Z,1520709291.813 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:14:52.223Z,1520709292.223 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:14:52.612Z,1520709292.612 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:14:53.013Z,1520709293.013 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:14:53.410Z,1520709293.410 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:14:53.812Z,1520709293.812 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:14:54.216Z,1520709294.216 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:14:54.607Z,1520709294.607 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:14:55.003Z,1520709295.003 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:14:55.412Z,1520709295.412 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:14:55.835Z,1520709295.835 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:14:56.210Z,1520709296.210 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:14:56.608Z,1520709296.608 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:14:57.006Z,1520709297.006 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:14:57.418Z,1520709297.418 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:14:57.841Z,1520709297.841 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:14:58.201Z,1520709298.201 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:14:58.602Z,1520709298.602 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:14:59.001Z,1520709299.001 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:14:59.432Z,1520709299.432 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:14:59.804Z,1520709299.804 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:15:00.216Z,1520709300.216 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:15:00.601Z,1520709300.601 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:15:01.006Z,1520709301.006 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:15:01.432Z,1520709301.432 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:15:01.801Z,1520709301.801 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:15:02.202Z,1520709302.202 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:15:02.611Z,1520709302.611 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:15:03.009Z,1520709303.009 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:15:03.401Z,1520709303.401 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:15:03.801Z,1520709303.801 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:15:04.203Z,1520709304.203 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:15:04.601Z,1520709304.601 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:15:05.001Z,1520709305.001 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:15:05.410Z,1520709305.410 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:15:05.815Z,1520709305.815 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:15:06.209Z,1520709306.209 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:15:06.615Z,1520709306.615 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:15:07.012Z,1520709307.012 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:15:07.409Z,1520709307.409 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:15:07.812Z,1520709307.812 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:15:08.224Z,1520709308.224 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:15:08.608Z,1520709308.608 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:15:09.035Z,1520709309.035 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:15:09.413Z,1520709309.413 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:15:14.769Z,1520709314.769 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:15:14.920Z,1520709314.920 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:15:15.326Z,1520709315.326 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:15:15.723Z,1520709315.723 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:15:16.127Z,1520709316.127 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:15:16.547Z,1520709316.547 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:15:16.913Z,1520709316.913 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:15:17.322Z,1520709317.322 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:15:17.722Z,1520709317.722 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:15:40.922Z,1520709340.922 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:15:41.322Z,1520709341.322 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:15:41.722Z,1520709341.722 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:15:42.120Z,1520709342.120 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:15:42.522Z,1520709342.522 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:15:42.922Z,1520709342.922 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:15:43.323Z,1520709343.323 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:15:43.722Z,1520709343.722 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:15:44.112Z,1520709344.112 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:15:44.513Z,1520709344.513 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:15:44.913Z,1520709344.913 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:15:45.315Z,1520709345.315 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:15:45.718Z,1520709345.718 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:15:46.121Z,1520709346.121 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:15:46.514Z,1520709346.514 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:15:46.647Z,1520709346.647 [CBIT](DEBUG): EFC running - data check-sum false
2018-03-10T19:15:46.915Z,1520709346.915 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:15:47.322Z,1520709347.322 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:15:47.731Z,1520709347.731 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:15:48.124Z,1520709348.124 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:15:48.527Z,1520709348.527 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:15:48.913Z,1520709348.913 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:15:49.314Z,1520709349.314 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:15:49.714Z,1520709349.714 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:15:50.113Z,1520709350.113 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:15:50.513Z,1520709350.513 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:15:50.915Z,1520709350.915 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:15:51.315Z,1520709351.315 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T19:17:20.302Z,1520709440.302 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T19:17:20.302Z,1520709440.302 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 33
2018-03-10T19:17:20.302Z,1520709440.302 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-10T19:17:20.315Z,1520709440.315 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-10T19:17:20.787Z,1520709440.787 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-10T19:17:20.787Z,1520709440.787 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 33
2018-03-10T19:17:21.121Z,1520709441.121 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-10T19:17:21.122Z,1520709441.122 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-10T19:17:21.122Z,1520709441.122 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-10T19:18:09.123Z,1520709489.123 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-03-10T19:18:09.123Z,1520709489.123 [Default:CheckIn:C.Wait] Stopped
2018-03-10T19:18:09.124Z,1520709489.124 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-03-10T19:18:09.124Z,1520709489.124 [Default:CheckIn:D] Running Loop=1
2018-03-10T19:18:09.503Z,1520709489.503 [Default:CheckIn:D] Stopped
2018-03-10T19:18:09.503Z,1520709489.503 [Default:CheckIn:E] Running Loop=1
2018-03-10T19:18:09.911Z,1520709489.911 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 838.859701 min 
2018-03-10T19:18:09.911Z,1520709489.911 [Default:CheckIn:E] Stopped
2018-03-10T19:18:09.911Z,1520709489.911 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-03-10T19:18:09.911Z,1520709489.911 [Default:CheckIn] Stopped
2018-03-10T19:18:09.911Z,1520709489.911 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-03-10T19:18:09.912Z,1520709489.912 [Default:CheckIn](INFO): Running loop #83
2018-03-10T19:18:09.912Z,1520709489.912 [Default:CheckIn] Running Loop=83
2018-03-10T19:18:09.912Z,1520709489.912 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-03-10T19:18:09.912Z,1520709489.912 [Default:CheckIn:Read_GPS] Running Loop=1
2018-03-10T19:18:14.354Z,1520709494.354 [NAL9602](INFO): Powering up
2018-03-10T19:18:25.304Z,1520709505.304 [NAL9602](INFO): NAL9602 initialized
2018-03-10T19:18:26.949Z,1520709506.949 [BPC1](ERROR): Failed to receive battery data
2018-03-10T19:18:26.949Z,1520709506.949 [BPC1] Communications Fault, FailCount= 1
2018-03-10T19:18:26.949Z,1520709506.949 [BPC1](ERROR): Communications Fault
2018-03-10T19:18:27.036Z,1520709507.036 [CBIT](ERROR): Communications Fault in component: BPC1
2018-03-10T19:18:28.184Z,1520709508.184 [CBIT](INFO): Clearing failed state for component BPC1
2018-03-10T19:18:28.184Z,1520709508.184 [BPC1] No Fault, FailCount= 1
2018-03-10T19:18:58.505Z,1520709538.505 [NAL9602](INFO): SBD MO Status=0, MOMSN=5841, MT Status=0, MTMSN=0
2018-03-10T19:18:58.506Z,1520709538.506 [NAL9602](INFO): No messages in MT queue
2018-03-10T19:18:58.935Z,1520709538.935 [BPC1](FAULT): Failed to initialize
2018-03-10T19:18:58.935Z,1520709538.935 [BPC1] Communications Fault, FailCount= 2
2018-03-10T19:18:58.935Z,1520709538.935 [BPC1](ERROR): Communications Fault
2018-03-10T19:18:58.988Z,1520709538.988 [CBIT](ERROR): Communications Fault in component: BPC1
2018-03-10T19:19:00.238Z,1520709540.238 [CBIT](INFO): Clearing failed state for component BPC1
2018-03-10T19:19:00.238Z,1520709540.238 [BPC1] No Fault, FailCount= 2
2018-03-10T19:19:30.658Z,1520709570.658 [BPC1](FAULT): Failed to initialize
2018-03-10T19:19:30.658Z,1520709570.658 [BPC1] Communications Fault, FailCount= 3
2018-03-10T19:19:30.658Z,1520709570.658 [BPC1](ERROR): Communications Fault
2018-03-10T19:19:30.710Z,1520709570.710 [CBIT](ERROR): Communications Fault in component: BPC1
2018-03-10T19:19:31.962Z,1520709571.962 [CBIT](INFO): Clearing failed state for component BPC1
2018-03-10T19:19:31.962Z,1520709571.962 [BPC1] No Fault, FailCount= 3
2018-03-10T19:20:02.681Z,1520709602.681 [BPC1](FAULT): Failed to initialize
2018-03-10T19:20:02.681Z,1520709602.681 [BPC1] Communications Fault, FailCount= 4
2018-03-10T19:20:02.681Z,1520709602.681 [BPC1](ERROR): Communications Fault
2018-03-10T19:20:02.712Z,1520709602.712 [CBIT](ERROR): Communications Fault in component: BPC1
2018-03-10T19:20:03.931Z,1520709603.931 [CBIT](INFO): Clearing failed state for component BPC1
2018-03-10T19:20:03.931Z,1520709603.931 [BPC1] No Fault, FailCount= 4
2018-03-10T19:20:21.249Z,1520709621.249 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T19:20:21.249Z,1520709621.249 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 34
2018-03-10T19:20:21.249Z,1520709621.249 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-10T19:20:21.262Z,1520709621.262 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-10T19:20:21.686Z,1520709621.686 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-10T19:20:21.686Z,1520709621.686 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 34
2018-03-10T19:20:22.048Z,1520709622.048 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-10T19:20:22.048Z,1520709622.048 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-10T19:20:22.049Z,1520709622.049 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-10T19:20:30.388Z,1520709630.388 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-03-10T19:20:30.388Z,1520709630.388 [NAL9602] Data Fault, FailCount= 1
2018-03-10T19:20:30.388Z,1520709630.388 [NAL9602](ERROR): Data Fault
2018-03-10T19:20:30.527Z,1520709630.527 [CBIT](ERROR): Data Fault in component: NAL9602
2018-03-10T19:20:30.792Z,1520709630.792 [NAL9602](INFO): Powering down
2018-03-10T19:20:31.716Z,1520709631.716 [CBIT](INFO): Clearing failed state for component NAL9602
2018-03-10T19:20:31.716Z,1520709631.716 [NAL9602] No Fault, FailCount= 1
2018-03-10T19:20:34.448Z,1520709634.448 [BPC1](FAULT): Failed to initialize
2018-03-10T19:20:34.448Z,1520709634.448 [BPC1] Communications Fault, FailCount= 5
2018-03-10T19:20:34.448Z,1520709634.448 [BPC1](ERROR): Communications Fault
2018-03-10T19:20:34.496Z,1520709634.496 [CBIT](ERROR): Communications Fault in component: BPC1
2018-03-10T19:20:35.662Z,1520709635.662 [CBIT](INFO): Clearing failed state for component BPC1
2018-03-10T19:20:35.662Z,1520709635.662 [BPC1] No Fault, FailCount= 5
2018-03-10T19:21:00.794Z,1520709660.794 [NAL9602](INFO): Powering up NAL9602
2018-03-10T19:21:16.594Z,1520709676.594 [NAL9602](INFO): NAL9602 initialized
2018-03-10T19:23:09.939Z,1520709789.939 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-03-10T19:18:09.9Z
2018-03-10T19:23:09.939Z,1520709789.939 [Default:CheckIn:Read_GPS] Stopped
2018-03-10T19:23:09.939Z,1520709789.939 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-03-10T19:23:17.619Z,1520709797.619 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20180310T051512/Courier0332.lzma
2018-03-10T19:23:18.418Z,1520709798.418 [DataOverHttps](INFO): Moved sent file to Logs/20180310T051512/Courier0332.lzma.bak
2018-03-10T19:23:18.418Z,1520709798.418 [DataOverHttps](INFO): SBD MOMSN=8007609
2018-03-10T19:23:24.281Z,1520709804.281 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T19:23:24.281Z,1520709804.281 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 35
2018-03-10T19:23:24.281Z,1520709804.281 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-10T19:23:24.318Z,1520709804.318 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-10T19:23:24.483Z,1520709804.483 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-10T19:23:24.483Z,1520709804.483 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 35
2018-03-10T19:23:24.804Z,1520709804.804 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-10T19:23:24.805Z,1520709804.805 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-10T19:23:24.805Z,1520709804.805 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-10T19:23:32.539Z,1520709812.539 [DataOverHttps](INFO): Sending 196 bytes from file Logs/20180310T051512/Express0333.lzma
2018-03-10T19:23:33.338Z,1520709813.338 [DataOverHttps](INFO): Moved sent file to Logs/20180310T051512/Express0333.lzma.bak
2018-03-10T19:23:33.338Z,1520709813.338 [DataOverHttps](INFO): SBD MOMSN=8007611
2018-03-10T19:23:34.341Z,1520709814.341 [Default:CheckIn:Read_Iridium] Stopped
2018-03-10T19:23:34.341Z,1520709814.341 [Default:CheckIn:C.Wait] Running Loop=1
2018-03-10T19:23:34.341Z,1520709814.341 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-03-10T19:23:41.252Z,1520709821.252 [NAL9602](INFO): Powering down
2018-03-10T19:25:46.689Z,1520709946.689 [CBIT](DEBUG): EFC running - data check-sum false
2018-03-10T19:26:25.077Z,1520709985.077 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T19:26:25.078Z,1520709985.078 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 36
2018-03-10T19:26:25.078Z,1520709985.078 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-10T19:26:25.128Z,1520709985.128 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-10T19:26:25.485Z,1520709985.485 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-10T19:26:25.485Z,1520709985.485 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 36
2018-03-10T19:26:25.879Z,1520709985.879 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-10T19:26:25.879Z,1520709985.879 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-10T19:26:25.880Z,1520709985.880 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-10T19:28:13.108Z,1520710093.108 [BPC1](ERROR): Failed to receive battery data
2018-03-10T19:28:13.108Z,1520710093.108 [BPC1] Communications Fault, FailCount= 1
2018-03-10T19:28:13.108Z,1520710093.108 [BPC1](ERROR): Communications Fault
2018-03-10T19:28:13.186Z,1520710093.186 [CBIT](ERROR): Communications Fault in component: BPC1
2018-03-10T19:28:14.386Z,1520710094.386 [CBIT](INFO): Clearing failed state for component BPC1
2018-03-10T19:28:14.386Z,1520710094.386 [BPC1] No Fault, FailCount= 1
2018-03-10T19:28:34.746Z,1520710114.746 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-03-10T19:28:34.746Z,1520710114.746 [Default:CheckIn:C.Wait] Stopped
2018-03-10T19:28:34.746Z,1520710114.746 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-03-10T19:28:34.746Z,1520710114.746 [Default:CheckIn:D] Running Loop=1
2018-03-10T19:28:35.125Z,1520710115.125 [Default:CheckIn:D] Stopped
2018-03-10T19:28:35.125Z,1520710115.125 [Default:CheckIn:E] Running Loop=1
2018-03-10T19:28:35.532Z,1520710115.532 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 849.286719 min 
2018-03-10T19:28:35.532Z,1520710115.532 [Default:CheckIn:E] Stopped
2018-03-10T19:28:35.532Z,1520710115.532 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-03-10T19:28:35.532Z,1520710115.532 [Default:CheckIn] Stopped
2018-03-10T19:28:35.533Z,1520710115.533 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-03-10T19:28:35.533Z,1520710115.533 [Default:CheckIn](INFO): Running loop #84
2018-03-10T19:28:35.533Z,1520710115.533 [Default:CheckIn] Running Loop=84
2018-03-10T19:28:35.533Z,1520710115.533 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-03-10T19:28:35.533Z,1520710115.533 [Default:CheckIn:Read_GPS] Running Loop=1
2018-03-10T19:28:41.442Z,1520710121.442 [NAL9602](INFO): Powering up
2018-03-10T19:28:45.065Z,1520710125.065 [BPC1](FAULT): Failed to initialize
2018-03-10T19:28:45.065Z,1520710125.065 [BPC1] Communications Fault, FailCount= 2
2018-03-10T19:28:45.065Z,1520710125.065 [BPC1](ERROR): Communications Fault
2018-03-10T19:28:45.126Z,1520710125.126 [CBIT](ERROR): Communications Fault in component: BPC1
2018-03-10T19:28:46.300Z,1520710126.300 [CBIT](INFO): Clearing failed state for component BPC1
2018-03-10T19:28:46.300Z,1520710126.300 [BPC1] No Fault, FailCount= 2
2018-03-10T19:28:52.624Z,1520710132.624 [NAL9602](INFO): NAL9602 initialized
2018-03-10T19:29:17.061Z,1520710157.061 [BPC1](FAULT): Failed to initialize
2018-03-10T19:29:17.061Z,1520710157.061 [BPC1] Communications Fault, FailCount= 3
2018-03-10T19:29:17.061Z,1520710157.061 [BPC1](ERROR): Communications Fault
2018-03-10T19:29:17.085Z,1520710157.085 [CBIT](ERROR): Communications Fault in component: BPC1
2018-03-10T19:29:18.370Z,1520710158.370 [CBIT](INFO): Clearing failed state for component BPC1
2018-03-10T19:29:18.370Z,1520710158.370 [BPC1] No Fault, FailCount= 3
2018-03-10T19:29:26.268Z,1520710166.268 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T19:29:26.269Z,1520710166.269 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 37
2018-03-10T19:29:26.269Z,1520710166.269 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-10T19:29:26.302Z,1520710166.302 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-10T19:29:26.750Z,1520710166.750 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-10T19:29:26.756Z,1520710166.756 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 37
2018-03-10T19:29:27.113Z,1520710167.113 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-10T19:29:27.113Z,1520710167.113 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-10T19:29:27.114Z,1520710167.114 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-10T19:29:33.425Z,1520710173.425 [NAL9602](INFO): SBD MO Status=2, MOMSN=5842, MT Status=2, MTMSN=0
2018-03-10T19:29:33.426Z,1520710173.426 [NAL9602](ERROR): Failed to initiate SBD session. Error code: 2
2018-03-10T19:29:46.489Z,1520710186.489 [NAL9602](INFO): SBD MO Status=2, MOMSN=5842, MT Status=2, MTMSN=0
2018-03-10T19:29:46.490Z,1520710186.490 [NAL9602](ERROR): Failed to initiate SBD session. Error code: 2
2018-03-10T19:29:48.914Z,1520710188.914 [BPC1](FAULT): Failed to initialize
2018-03-10T19:29:48.914Z,1520710188.914 [BPC1] Communications Fault, FailCount= 4
2018-03-10T19:29:48.914Z,1520710188.914 [BPC1](ERROR): Communications Fault
2018-03-10T19:29:48.938Z,1520710188.938 [CBIT](ERROR): Communications Fault in component: BPC1
2018-03-10T19:29:50.159Z,1520710190.159 [CBIT](INFO): Clearing failed state for component BPC1
2018-03-10T19:29:50.159Z,1520710190.159 [BPC1] No Fault, FailCount= 4
2018-03-10T19:32:27.481Z,1520710347.481 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T19:32:27.481Z,1520710347.481 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 38
2018-03-10T19:32:27.481Z,1520710347.481 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-10T19:32:27.523Z,1520710347.523 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-10T19:32:27.912Z,1520710347.912 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-10T19:32:27.912Z,1520710347.912 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 38
2018-03-10T19:32:28.288Z,1520710348.288 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-10T19:32:28.288Z,1520710348.288 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-10T19:32:28.288Z,1520710348.288 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-10T19:33:35.707Z,1520710415.707 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-03-10T19:28:35.5Z
2018-03-10T19:33:35.708Z,1520710415.708 [Default:CheckIn:Read_GPS] Stopped
2018-03-10T19:33:35.708Z,1520710415.708 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-03-10T19:33:44.864Z,1520710424.864 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20180310T051512/Courier0336.lzma
2018-03-10T19:33:45.813Z,1520710425.813 [DataOverHttps](INFO): Moved sent file to Logs/20180310T051512/Courier0336.lzma.bak
2018-03-10T19:33:45.813Z,1520710425.813 [DataOverHttps](INFO): SBD MOMSN=8007688
2018-03-10T19:33:56.188Z,1520710436.188 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session.
2018-03-10T19:34:02.159Z,1520710442.159 [PNI_TCM](FAULT): Failed to acquire valid data within timeout.
2018-03-10T19:34:02.159Z,1520710442.159 [PNI_TCM] Data Fault, FailCount= 1
2018-03-10T19:34:02.159Z,1520710442.159 [PNI_TCM](ERROR): Data Fault
2018-03-10T19:34:02.244Z,1520710442.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 5.607836 seconds old.
2018-03-10T19:34:02.246Z,1520710442.246 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 5.608110 seconds old.
2018-03-10T19:34:02.257Z,1520710442.257 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 5.616650 seconds old.
2018-03-10T19:34:02.286Z,1520710442.286 [CBIT](ERROR): Data Fault in component: PNI_TCM
2018-03-10T19:34:02.342Z,1520710442.342 [PNI_TCM](INFO): Powering down
2018-03-10T19:34:02.466Z,1520710442.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 5.829878 seconds old.
2018-03-10T19:34:02.468Z,1520710442.468 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 5.830467 seconds old.
2018-03-10T19:34:02.471Z,1520710442.471 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 5.830628 seconds old.
2018-03-10T19:34:02.711Z,1520710442.711 [DataOverHttps](INFO): Sending 158 bytes from file Logs/20180310T051512/Express0337.lzma
2018-03-10T19:34:02.758Z,1520710442.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 6.122388 seconds old.
2018-03-10T19:34:02.761Z,1520710442.761 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 6.122895 seconds old.
2018-03-10T19:34:02.763Z,1520710442.763 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 6.123189 seconds old.
2018-03-10T19:34:03.139Z,1520710443.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 6.503418 seconds old.
2018-03-10T19:34:03.142Z,1520710443.142 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 6.503806 seconds old.
2018-03-10T19:34:03.160Z,1520710443.160 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 6.520208 seconds old.
2018-03-10T19:34:03.510Z,1520710443.510 [DataOverHttps](INFO): Moved sent file to Logs/20180310T051512/Express0337.lzma.bak
2018-03-10T19:34:03.510Z,1520710443.510 [DataOverHttps](INFO): SBD MOMSN=8007690
2018-03-10T19:34:03.544Z,1520710443.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 6.907662 seconds old.
2018-03-10T19:34:03.546Z,1520710443.546 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 6.908032 seconds old.
2018-03-10T19:34:03.568Z,1520710443.568 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 6.928427 seconds old.
2018-03-10T19:34:03.591Z,1520710443.591 [CBIT](INFO): Clearing failed state for component PNI_TCM
2018-03-10T19:34:03.591Z,1520710443.591 [PNI_TCM] No Fault, FailCount= 1
2018-03-10T19:34:04.592Z,1520710444.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 7.955885 seconds old.
2018-03-10T19:34:04.594Z,1520710444.594 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 7.956307 seconds old.
2018-03-10T19:34:04.625Z,1520710444.625 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 7.984529 seconds old.
2018-03-10T19:34:04.632Z,1520710444.632 [Default:CheckIn:Read_Iridium] Stopped
2018-03-10T19:34:04.632Z,1520710444.632 [Default:CheckIn:C.Wait] Running Loop=1
2018-03-10T19:34:04.632Z,1520710444.632 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-03-10T19:34:04.728Z,1520710444.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 8.092015 seconds old.
2018-03-10T19:34:04.730Z,1520710444.730 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 8.092353 seconds old.
2018-03-10T19:34:04.741Z,1520710444.741 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 8.101074 seconds old.
2018-03-10T19:34:05.167Z,1520710445.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 8.531331 seconds old.
2018-03-10T19:34:05.170Z,1520710445.170 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 8.531780 seconds old.
2018-03-10T19:34:05.176Z,1520710445.176 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 8.536413 seconds old.
2018-03-10T19:34:10.068Z,1520710450.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 13.432212 seconds old.
2018-03-10T19:34:10.075Z,1520710450.075 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 13.432538 seconds old.
2018-03-10T19:34:10.077Z,1520710450.077 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 13.437042 seconds old.
2018-03-10T19:34:10.200Z,1520710450.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 13.563920 seconds old.
2018-03-10T19:34:10.202Z,1520710450.202 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 13.564222 seconds old.
2018-03-10T19:34:10.213Z,1520710450.213 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 13.573022 seconds old.
2018-03-10T19:34:10.622Z,1520710450.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 13.986044 seconds old.
2018-03-10T19:34:10.625Z,1520710450.625 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 13.986573 seconds old.
2018-03-10T19:34:10.627Z,1520710450.627 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 13.986766 seconds old.
2018-03-10T19:34:10.992Z,1520710450.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 14.355696 seconds old.
2018-03-10T19:34:10.994Z,1520710450.994 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 14.356138 seconds old.
2018-03-10T19:34:11.001Z,1520710451.001 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 14.360747 seconds old.
2018-03-10T19:34:11.396Z,1520710451.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 14.760340 seconds old.
2018-03-10T19:34:11.399Z,1520710451.399 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 14.760763 seconds old.
2018-03-10T19:34:11.401Z,1520710451.401 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 14.761264 seconds old.
2018-03-10T19:34:26.989Z,1520710466.989 [NAL9602](INFO): Powering down
2018-03-10T19:35:28.332Z,1520710528.332 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T19:35:28.332Z,1520710528.332 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 39
2018-03-10T19:35:28.332Z,1520710528.332 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-10T19:35:28.345Z,1520710528.345 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-10T19:35:28.791Z,1520710528.791 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-10T19:35:28.791Z,1520710528.791 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 39
2018-03-10T19:35:29.187Z,1520710529.187 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-10T19:35:29.188Z,1520710529.188 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-10T19:35:29.188Z,1520710529.188 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-10T19:35:46.825Z,1520710546.825 [CBIT](DEBUG): EFC running - data check-sum false
2018-03-10T19:37:54.610Z,1520710674.610 [BPC1](ERROR): Failed to receive battery data
2018-03-10T19:37:54.610Z,1520710674.610 [BPC1] Communications Fault, FailCount= 1
2018-03-10T19:37:54.610Z,1520710674.610 [BPC1](ERROR): Communications Fault
2018-03-10T19:37:54.674Z,1520710674.674 [CBIT](ERROR): Communications Fault in component: BPC1
2018-03-10T19:37:55.848Z,1520710675.848 [CBIT](INFO): Clearing failed state for component BPC1
2018-03-10T19:37:55.848Z,1520710675.848 [BPC1] No Fault, FailCount= 1
2018-03-10T19:38:26.304Z,1520710706.304 [BPC1](FAULT): Failed to initialize
2018-03-10T19:38:26.305Z,1520710706.305 [BPC1] Communications Fault, FailCount= 2
2018-03-10T19:38:26.305Z,1520710706.305 [BPC1](ERROR): Communications Fault
2018-03-10T19:38:26.382Z,1520710706.382 [CBIT](ERROR): Communications Fault in component: BPC1
2018-03-10T19:38:27.568Z,1520710707.568 [CBIT](INFO): Clearing failed state for component BPC1
2018-03-10T19:38:27.568Z,1520710707.568 [BPC1] No Fault, FailCount= 2
2018-03-10T19:38:29.546Z,1520710709.546 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T19:38:29.546Z,1520710709.546 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 40
2018-03-10T19:38:29.546Z,1520710709.546 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-10T19:38:29.591Z,1520710709.591 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-10T19:38:30.003Z,1520710710.003 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-10T19:38:30.003Z,1520710710.003 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 40
2018-03-10T19:38:30.351Z,1520710710.351 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-10T19:38:30.352Z,1520710710.352 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-10T19:38:30.352Z,1520710710.352 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-10T19:38:58.311Z,1520710738.311 [BPC1](FAULT): Failed to initialize
2018-03-10T19:38:58.311Z,1520710738.311 [BPC1] Communications Fault, FailCount= 3
2018-03-10T19:38:58.311Z,1520710738.311 [BPC1](ERROR): Communications Fault
2018-03-10T19:38:58.342Z,1520710738.342 [CBIT](ERROR): Communications Fault in component: BPC1
2018-03-10T19:38:59.551Z,1520710739.551 [CBIT](INFO): Clearing failed state for component BPC1
2018-03-10T19:38:59.551Z,1520710739.551 [BPC1] No Fault, FailCount= 3
2018-03-10T19:39:04.757Z,1520710744.757 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-03-10T19:39:04.757Z,1520710744.757 [Default:CheckIn:C.Wait] Stopped
2018-03-10T19:39:04.757Z,1520710744.757 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-03-10T19:39:04.757Z,1520710744.757 [Default:CheckIn:D] Running Loop=1
2018-03-10T19:39:05.161Z,1520710745.161 [Default:CheckIn:D] Stopped
2018-03-10T19:39:05.161Z,1520710745.161 [Default:CheckIn:E] Running Loop=1
2018-03-10T19:39:05.547Z,1520710745.547 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 859.787370 min 
2018-03-10T19:39:05.547Z,1520710745.547 [Default:CheckIn:E] Stopped
2018-03-10T19:39:05.547Z,1520710745.547 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-03-10T19:39:05.548Z,1520710745.548 [Default:CheckIn] Stopped
2018-03-10T19:39:05.548Z,1520710745.548 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-03-10T19:39:05.548Z,1520710745.548 [Default:CheckIn](INFO): Running loop #85
2018-03-10T19:39:05.548Z,1520710745.548 [Default:CheckIn] Running Loop=85
2018-03-10T19:39:05.548Z,1520710745.548 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-03-10T19:39:05.548Z,1520710745.548 [Default:CheckIn:Read_GPS] Running Loop=1
2018-03-10T19:39:06.276Z,1520710746.276 [NAL9602](INFO): Powering up
2018-03-10T19:39:17.280Z,1520710757.280 [NAL9602](INFO): NAL9602 initialized
2018-03-10T19:39:18.080Z,1520710758.080 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-03-10T19:39:18.080Z,1520710758.080 [NAL9602] Data Fault, FailCount= 2
2018-03-10T19:39:18.080Z,1520710758.080 [NAL9602](ERROR): Data Fault
2018-03-10T19:39:18.218Z,1520710758.218 [CBIT](ERROR): Data Fault in component: NAL9602
2018-03-10T19:39:18.489Z,1520710758.489 [NAL9602](INFO): Powering down
2018-03-10T19:39:19.393Z,1520710759.393 [CBIT](INFO): Clearing failed state for component NAL9602
2018-03-10T19:39:19.393Z,1520710759.393 [NAL9602] No Fault, FailCount= 2
2018-03-10T19:39:30.116Z,1520710770.116 [BPC1](FAULT): Failed to initialize
2018-03-10T19:39:30.116Z,1520710770.116 [BPC1] Communications Fault, FailCount= 4
2018-03-10T19:39:30.116Z,1520710770.116 [BPC1](ERROR): Communications Fault
2018-03-10T19:39:30.199Z,1520710770.199 [CBIT](ERROR): Communications Fault in component: BPC1
2018-03-10T19:39:31.344Z,1520710771.344 [CBIT](INFO): Clearing failed state for component BPC1
2018-03-10T19:39:31.345Z,1520710771.345 [BPC1] No Fault, FailCount= 4
2018-03-10T19:39:48.880Z,1520710788.880 [NAL9602](INFO): Powering up NAL9602
2018-03-10T19:40:00.080Z,1520710800.080 [NAL9602](INFO): NAL9602 initialized
2018-03-10T19:40:31.497Z,1520710831.497 [NAL9602](INFO): SBD MO Status=2, MOMSN=5842, MT Status=2, MTMSN=0
2018-03-10T19:40:31.498Z,1520710831.498 [NAL9602](ERROR): Failed to initiate SBD session. Error code: 2
2018-03-10T19:41:30.455Z,1520710890.455 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T19:41:30.455Z,1520710890.455 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 41
2018-03-10T19:41:30.455Z,1520710890.455 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-10T19:41:30.488Z,1520710890.488 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-10T19:41:30.835Z,1520710890.835 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-10T19:41:30.835Z,1520710890.835 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 41
2018-03-10T19:41:31.242Z,1520710891.242 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-10T19:41:31.259Z,1520710891.259 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-10T19:41:31.259Z,1520710891.259 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-10T19:43:47.905Z,1520711027.905 [NAL9602](INFO): SBD MO Status=2, MOMSN=5842, MT Status=2, MTMSN=0
2018-03-10T19:43:47.906Z,1520711027.906 [NAL9602](ERROR): Failed to initiate SBD session. Error code: 2
2018-03-10T19:44:05.563Z,1520711045.563 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-03-10T19:39:05.5Z
2018-03-10T19:44:05.563Z,1520711045.563 [Default:CheckIn:Read_GPS] Stopped
2018-03-10T19:44:05.563Z,1520711045.563 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-03-10T19:44:13.781Z,1520711053.781 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20180310T051512/Courier0340.lzma
2018-03-10T19:44:14.758Z,1520711054.758 [DataOverHttps](INFO): Moved sent file to Logs/20180310T051512/Courier0340.lzma.bak
2018-03-10T19:44:14.758Z,1520711054.758 [DataOverHttps](INFO): SBD MOMSN=8007749
2018-03-10T19:44:27.801Z,1520711067.801 [DataOverHttps](INFO): Sending 266 bytes from file Logs/20180310T051512/Express0341.lzma
2018-03-10T19:44:28.594Z,1520711068.594 [DataOverHttps](INFO): Moved sent file to Logs/20180310T051512/Express0341.lzma.bak
2018-03-10T19:44:28.594Z,1520711068.594 [DataOverHttps](INFO): SBD MOMSN=8007751
2018-03-10T19:44:29.549Z,1520711069.549 [Default:CheckIn:Read_Iridium] Stopped
2018-03-10T19:44:29.549Z,1520711069.549 [Default:CheckIn:C.Wait] Running Loop=1
2018-03-10T19:44:29.549Z,1520711069.549 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-03-10T19:44:35.095Z,1520711075.095 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T19:44:35.096Z,1520711075.096 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 42
2018-03-10T19:44:35.096Z,1520711075.096 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-10T19:44:35.133Z,1520711075.133 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-10T19:44:35.301Z,1520711075.301 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-10T19:44:35.301Z,1520711075.301 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 42
2018-03-10T19:44:35.610Z,1520711075.610 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-10T19:44:35.610Z,1520711075.610 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-10T19:44:35.610Z,1520711075.610 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-10T19:44:59.153Z,1520711099.153 [NAL9602](INFO): SBD MO Status=2, MOMSN=5842, MT Status=2, MTMSN=0
2018-03-10T19:44:59.154Z,1520711099.154 [NAL9602](ERROR): Failed to initiate SBD session. Error code: 2
2018-03-10T19:45:03.569Z,1520711103.569 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session.
2018-03-10T19:45:33.988Z,1520711133.988 [NAL9602](INFO): Powering down
2018-03-10T19:45:46.877Z,1520711146.877 [CBIT](DEBUG): EFC running - data check-sum false
2018-03-10T19:47:34.779Z,1520711254.779 [BPC1](ERROR): Failed to receive battery data
2018-03-10T19:47:34.779Z,1520711254.779 [BPC1] Communications Fault, FailCount= 1
2018-03-10T19:47:34.779Z,1520711254.779 [BPC1](ERROR): Communications Fault
2018-03-10T19:47:34.802Z,1520711254.802 [CBIT](ERROR): Communications Fault in component: BPC1
2018-03-10T19:47:35.992Z,1520711255.992 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T19:47:35.992Z,1520711255.992 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 43
2018-03-10T19:47:35.992Z,1520711255.992 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-10T19:47:36.004Z,1520711256.004 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-10T19:47:36.005Z,1520711256.005 [CBIT](INFO): Clearing failed state for component BPC1
2018-03-10T19:47:36.005Z,1520711256.005 [BPC1] No Fault, FailCount= 1
2018-03-10T19:47:36.449Z,1520711256.449 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-10T19:47:36.449Z,1520711256.449 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 43
2018-03-10T19:47:36.798Z,1520711256.798 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-10T19:47:36.799Z,1520711256.799 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-10T19:47:36.799Z,1520711256.799 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-10T19:48:06.777Z,1520711286.777 [BPC1](FAULT): Failed to initialize
2018-03-10T19:48:06.777Z,1520711286.777 [BPC1] Communications Fault, FailCount= 2
2018-03-10T19:48:06.777Z,1520711286.777 [BPC1](ERROR): Communications Fault
2018-03-10T19:48:06.799Z,1520711286.799 [CBIT](ERROR): Communications Fault in component: BPC1
2018-03-10T19:48:08.003Z,1520711288.003 [CBIT](INFO): Clearing failed state for component BPC1
2018-03-10T19:48:08.003Z,1520711288.003 [BPC1] No Fault, FailCount= 2
2018-03-10T19:48:38.538Z,1520711318.538 [BPC1](FAULT): Failed to initialize
2018-03-10T19:48:38.538Z,1520711318.538 [BPC1] Communications Fault, FailCount= 3
2018-03-10T19:48:38.538Z,1520711318.538 [BPC1](ERROR): Communications Fault
2018-03-10T19:48:38.624Z,1520711318.624 [CBIT](ERROR): Communications Fault in component: BPC1
2018-03-10T19:48:39.798Z,1520711319.798 [CBIT](INFO): Clearing failed state for component BPC1
2018-03-10T19:48:39.798Z,1520711319.798 [BPC1] No Fault, FailCount= 3
2018-03-10T19:49:10.534Z,1520711350.534 [BPC1](FAULT): Failed to initialize
2018-03-10T19:49:10.534Z,1520711350.534 [BPC1] Communications Fault, FailCount= 4
2018-03-10T19:49:10.534Z,1520711350.534 [BPC1](ERROR): Communications Fault
2018-03-10T19:49:10.596Z,1520711350.596 [CBIT](ERROR): Communications Fault in component: BPC1
2018-03-10T19:49:11.766Z,1520711351.766 [CBIT](INFO): Clearing failed state for component BPC1
2018-03-10T19:49:11.766Z,1520711351.766 [BPC1] No Fault, FailCount= 4
2018-03-10T19:49:29.760Z,1520711369.760 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-03-10T19:49:29.760Z,1520711369.760 [Default:CheckIn:C.Wait] Stopped
2018-03-10T19:49:29.760Z,1520711369.760 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-03-10T19:49:29.760Z,1520711369.760 [Default:CheckIn:D] Running Loop=1
2018-03-10T19:49:30.148Z,1520711370.148 [Default:CheckIn:D] Stopped
2018-03-10T19:49:30.148Z,1520711370.148 [Default:CheckIn:E] Running Loop=1
2018-03-10T19:49:30.573Z,1520711370.573 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 870.203776 min 
2018-03-10T19:49:30.573Z,1520711370.573 [Default:CheckIn:E] Stopped
2018-03-10T19:49:30.573Z,1520711370.573 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-03-10T19:49:30.573Z,1520711370.573 [Default:CheckIn] Stopped
2018-03-10T19:49:30.574Z,1520711370.574 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-03-10T19:49:30.574Z,1520711370.574 [Default:CheckIn](INFO): Running loop #86
2018-03-10T19:49:30.574Z,1520711370.574 [Default:CheckIn] Running Loop=86
2018-03-10T19:49:30.574Z,1520711370.574 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-03-10T19:49:30.574Z,1520711370.574 [Default:CheckIn:Read_GPS] Running Loop=1
2018-03-10T19:49:31.294Z,1520711371.294 [NAL9602](INFO): Powering up
2018-03-10T19:49:42.112Z,1520711382.112 [NAL9602](INFO): NAL9602 initialized
2018-03-10T19:50:14.116Z,1520711414.116 [NAL9602](ERROR): Failed to receive proper response when querying signal strength for MT queue check.
2018-03-10T19:50:14.199Z,1520711414.199 [NAL9602](FAULT): received: 
+SBDI: 2, 5842, 2, 0, 0, 0

OK
2018-03-10T19:50:14.199Z,1520711414.199 [NAL9602] Data Fault, FailCount= 3
2018-03-10T19:50:14.199Z,1520711414.199 [NAL9602](ERROR): Data Fault
2018-03-10T19:50:14.290Z,1520711414.290 [CBIT](ERROR): Data Fault in component: NAL9602
2018-03-10T19:50:14.512Z,1520711414.512 [NAL9602](INFO): Powering down
2018-03-10T19:50:15.392Z,1520711415.392 [CBIT](INFO): Clearing failed state for component NAL9602
2018-03-10T19:50:15.392Z,1520711415.392 [NAL9602] No Fault, FailCount= 3
2018-03-10T19:50:37.012Z,1520711437.012 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T19:50:37.012Z,1520711437.012 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 44
2018-03-10T19:50:37.012Z,1520711437.012 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-10T19:50:37.048Z,1520711437.048 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-10T19:50:37.412Z,1520711437.412 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-10T19:50:37.412Z,1520711437.412 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 44
2018-03-10T19:50:37.809Z,1520711437.809 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-10T19:50:37.809Z,1520711437.809 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-10T19:50:37.810Z,1520711437.810 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-10T19:50:44.537Z,1520711444.537 [NAL9602](INFO): Powering up NAL9602
2018-03-10T19:50:55.332Z,1520711455.332 [NAL9602](INFO): NAL9602 initialized
2018-03-10T19:50:56.137Z,1520711456.137 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-03-10T19:50:56.137Z,1520711456.137 [NAL9602] Data Fault, FailCount= 4
2018-03-10T19:50:56.137Z,1520711456.137 [NAL9602](ERROR): Data Fault
2018-03-10T19:50:56.265Z,1520711456.265 [CBIT](ERROR): Data Fault in component: NAL9602
2018-03-10T19:50:56.540Z,1520711456.540 [NAL9602](INFO): Powering down
2018-03-10T19:50:57.427Z,1520711457.427 [CBIT](INFO): Clearing failed state for component NAL9602
2018-03-10T19:50:57.427Z,1520711457.427 [NAL9602] No Fault, FailCount= 4
2018-03-10T19:51:26.932Z,1520711486.932 [NAL9602](INFO): Powering up NAL9602
2018-03-10T19:51:37.912Z,1520711497.912 [NAL9602](INFO): NAL9602 initialized
2018-03-10T19:52:36.846Z,1520711556.846 [NAL9602](INFO): SBD MO Status=2, MOMSN=5842, MT Status=2, MTMSN=0
2018-03-10T19:52:36.846Z,1520711556.846 [NAL9602](ERROR): Failed to initiate SBD session. Error code: 2
2018-03-10T19:53:22.429Z,1520711602.429 [NAL9602](INFO): SBD MO Status=2, MOMSN=5842, MT Status=2, MTMSN=0
2018-03-10T19:53:22.430Z,1520711602.430 [NAL9602](ERROR): Failed to initiate SBD session. Error code: 2
2018-03-10T19:53:38.124Z,1520711618.124 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T19:53:38.124Z,1520711618.124 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 45
2018-03-10T19:53:38.124Z,1520711618.124 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-10T19:53:38.137Z,1520711618.137 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-10T19:53:38.538Z,1520711618.538 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-10T19:53:38.538Z,1520711618.538 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 45
2018-03-10T19:53:38.924Z,1520711618.924 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-10T19:53:38.924Z,1520711618.924 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-10T19:53:38.924Z,1520711618.924 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-10T19:54:22.461Z,1520711662.461 [NAL9602](INFO): SBD MO Status=0, MOMSN=5842, MT Status=0, MTMSN=0
2018-03-10T19:54:22.461Z,1520711662.461 [NAL9602](INFO): No messages in MT queue
2018-03-10T19:54:23.664Z,1520711663.664 [NAL9602](INFO): GPS fix at 20180310T195346: (21.311394, -157.874353)
2018-03-10T19:54:23.736Z,1520711663.736 [Default:CheckIn:Read_GPS] Stopped
2018-03-10T19:54:23.736Z,1520711663.736 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-03-10T19:54:28.257Z,1520711668.257 [DataOverHttps](INFO): Sending 62 bytes from file Logs/20180310T051512/Courier0344.lzma
2018-03-10T19:54:29.042Z,1520711669.042 [DataOverHttps](INFO): Moved sent file to Logs/20180310T051512/Courier0344.lzma.bak
2018-03-10T19:54:29.042Z,1520711669.042 [DataOverHttps](INFO): SBD MOMSN=8007819
2018-03-10T19:54:44.735Z,1520711684.735 [DataOverHttps](INFO): Sending 300 bytes from file Logs/20180310T051512/Express0345.lzma
2018-03-10T19:54:45.530Z,1520711685.530 [DataOverHttps](INFO): Moved sent file to Logs/20180310T051512/Express0345.lzma.bak
2018-03-10T19:54:45.530Z,1520711685.530 [DataOverHttps](INFO): SBD MOMSN=8007822
2018-03-10T19:54:46.282Z,1520711686.282 [Default:CheckIn:Read_Iridium] Stopped
2018-03-10T19:54:46.282Z,1520711686.282 [Default:CheckIn:C.Wait] Running Loop=1
2018-03-10T19:54:46.282Z,1520711686.282 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-03-10T19:54:58.404Z,1520711698.404 [NAL9602](INFO): Powering down
2018-03-10T19:55:46.896Z,1520711746.896 [CBIT](DEBUG): EFC running - data check-sum false
2018-03-10T19:56:38.992Z,1520711798.992 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T19:56:38.992Z,1520711798.992 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 1
2018-03-10T19:56:38.992Z,1520711798.992 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-10T19:56:39.004Z,1520711799.004 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-10T19:56:39.418Z,1520711799.418 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-10T19:56:39.418Z,1520711799.418 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 1
2018-03-10T19:56:39.840Z,1520711799.840 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-10T19:56:39.841Z,1520711799.841 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-10T19:56:39.841Z,1520711799.841 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-10T19:57:11.569Z,1520711831.569 [BPC1](ERROR): Bank B: No match for stick 1 serial number:FFFF in the onboard configuration file.
2018-03-10T19:57:11.570Z,1520711831.570 [BPC1](ERROR): Failed to parse Bank B battery data
2018-03-10T19:57:11.570Z,1520711831.570 [BPC1] Data Fault, FailCount= 1
2018-03-10T19:57:11.570Z,1520711831.570 [BPC1](ERROR): Data Fault
2018-03-10T19:57:11.630Z,1520711831.630 [CBIT](ERROR): Data Fault in component: BPC1
2018-03-10T19:57:12.828Z,1520711832.828 [CBIT](INFO): Clearing failed state for component BPC1
2018-03-10T19:57:12.828Z,1520711832.828 [BPC1] No Fault, FailCount= 1
2018-03-10T19:57:43.574Z,1520711863.574 [BPC1](FAULT): Failed to initialize
2018-03-10T19:57:43.574Z,1520711863.574 [BPC1] Communications Fault, FailCount= 2
2018-03-10T19:57:43.574Z,1520711863.574 [BPC1](ERROR): Communications Fault
2018-03-10T19:57:43.632Z,1520711863.632 [CBIT](ERROR): Communications Fault in component: BPC1
2018-03-10T19:57:44.801Z,1520711864.801 [CBIT](INFO): Clearing failed state for component BPC1
2018-03-10T19:57:44.801Z,1520711864.801 [BPC1] No Fault, FailCount= 2
2018-03-10T19:58:15.586Z,1520711895.586 [BPC1](FAULT): Failed to initialize
2018-03-10T19:58:15.586Z,1520711895.586 [BPC1] Communications Fault, FailCount= 3
2018-03-10T19:58:15.586Z,1520711895.586 [BPC1](ERROR): Communications Fault
2018-03-10T19:58:15.637Z,1520711895.637 [CBIT](ERROR): Communications Fault in component: BPC1
2018-03-10T19:58:16.818Z,1520711896.818 [CBIT](INFO): Clearing failed state for component BPC1
2018-03-10T19:58:16.818Z,1520711896.818 [BPC1] No Fault, FailCount= 3
2018-03-10T19:58:50.419Z,1520711930.419 [BPC1](FAULT): Failed to initialize
2018-03-10T19:58:50.419Z,1520711930.419 [BPC1] Communications Fault, FailCount= 4
2018-03-10T19:58:50.419Z,1520711930.419 [BPC1](ERROR): Communications Fault
2018-03-10T19:58:50.467Z,1520711930.467 [CBIT](ERROR): Communications Fault in component: BPC1
2018-03-10T19:58:51.390Z,1520711931.390 [CBIT](INFO): Clearing failed state for component BPC1
2018-03-10T19:58:51.390Z,1520711931.390 [BPC1] No Fault, FailCount= 4
2018-03-10T19:59:40.126Z,1520711980.126 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T19:59:40.127Z,1520711980.127 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 2
2018-03-10T19:59:40.127Z,1520711980.127 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-10T19:59:40.188Z,1520711980.188 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-10T19:59:40.567Z,1520711980.567 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-10T19:59:40.567Z,1520711980.567 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 2
2018-03-10T19:59:40.925Z,1520711980.925 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-10T19:59:40.926Z,1520711980.926 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-10T19:59:40.926Z,1520711980.926 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-10T19:59:46.528Z,1520711986.528 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-03-10T19:59:46.528Z,1520711986.528 [Default:CheckIn:C.Wait] Stopped
2018-03-10T19:59:46.528Z,1520711986.528 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-03-10T19:59:46.528Z,1520711986.528 [Default:CheckIn:D] Running Loop=1
2018-03-10T19:59:46.928Z,1520711986.928 [Default:CheckIn:D] Stopped
2018-03-10T19:59:46.928Z,1520711986.928 [Default:CheckIn:E] Running Loop=1
2018-03-10T19:59:47.330Z,1520711987.330 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 880.483464 min 
2018-03-10T19:59:47.330Z,1520711987.330 [Default:CheckIn:E] Stopped
2018-03-10T19:59:47.330Z,1520711987.330 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-03-10T19:59:47.330Z,1520711987.330 [Default:CheckIn] Stopped
2018-03-10T19:59:47.330Z,1520711987.330 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-03-10T19:59:47.331Z,1520711987.331 [Default:CheckIn](INFO): Running loop #87
2018-03-10T19:59:47.331Z,1520711987.331 [Default:CheckIn] Running Loop=87
2018-03-10T19:59:47.331Z,1520711987.331 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-03-10T19:59:47.331Z,1520711987.331 [Default:CheckIn:Read_GPS] Running Loop=1
2018-03-10T19:59:50.550Z,1520711990.550 [NAL9602](INFO): Powering up
2018-03-10T20:00:01.696Z,1520712001.696 [NAL9602](INFO): NAL9602 initialized
2018-03-10T20:02:41.235Z,1520712161.235 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T20:02:41.235Z,1520712161.235 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 3
2018-03-10T20:02:41.235Z,1520712161.235 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-10T20:02:41.248Z,1520712161.248 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-10T20:02:41.655Z,1520712161.655 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-10T20:02:41.655Z,1520712161.655 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 3
2018-03-10T20:02:42.041Z,1520712162.041 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-10T20:02:42.041Z,1520712162.041 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-10T20:02:42.041Z,1520712162.041 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-10T20:04:47.412Z,1520712287.412 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-03-10T19:59:47.3Z
2018-03-10T20:04:47.412Z,1520712287.412 [Default:CheckIn:Read_GPS] Stopped
2018-03-10T20:04:47.412Z,1520712287.412 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-03-10T20:04:51.687Z,1520712291.687 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20180310T051512/Courier0348.lzma
2018-03-10T20:04:52.486Z,1520712292.486 [DataOverHttps](INFO): Moved sent file to Logs/20180310T051512/Courier0348.lzma.bak
2018-03-10T20:04:52.486Z,1520712292.486 [DataOverHttps](INFO): SBD MOMSN=8007903
2018-03-10T20:05:02.919Z,1520712302.919 [DataOverHttps](INFO): Sending 157 bytes from file Logs/20180310T051512/Express0349.lzma
2018-03-10T20:05:03.718Z,1520712303.718 [DataOverHttps](INFO): Moved sent file to Logs/20180310T051512/Express0349.lzma.bak
2018-03-10T20:05:03.718Z,1520712303.718 [DataOverHttps](INFO): SBD MOMSN=8007905
2018-03-10T20:05:04.457Z,1520712304.457 [Default:CheckIn:Read_Iridium] Stopped
2018-03-10T20:05:04.457Z,1520712304.457 [Default:CheckIn:C.Wait] Running Loop=1
2018-03-10T20:05:04.457Z,1520712304.457 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-03-10T20:05:04.538Z,1520712304.538 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session.
2018-03-10T20:05:35.052Z,1520712335.052 [NAL9602](INFO): Powering down
2018-03-10T20:05:42.312Z,1520712342.312 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T20:05:42.312Z,1520712342.312 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 4
2018-03-10T20:05:42.312Z,1520712342.312 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-10T20:05:42.325Z,1520712342.325 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-10T20:05:42.716Z,1520712342.716 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-10T20:05:42.716Z,1520712342.716 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 4
2018-03-10T20:05:43.115Z,1520712343.115 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-10T20:05:43.115Z,1520712343.115 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-10T20:05:43.116Z,1520712343.116 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-10T20:05:47.098Z,1520712347.098 [CBIT](DEBUG): EFC running - data check-sum false
2018-03-10T20:07:08.590Z,1520712428.590 [BPC1](ERROR): Failed to receive battery data
2018-03-10T20:07:08.590Z,1520712428.590 [BPC1] Communications Fault, FailCount= 1
2018-03-10T20:07:08.590Z,1520712428.590 [BPC1](ERROR): Communications Fault
2018-03-10T20:07:08.613Z,1520712428.613 [CBIT](ERROR): Communications Fault in component: BPC1
2018-03-10T20:07:09.504Z,1520712429.504 [CBIT](INFO): Clearing failed state for component BPC1
2018-03-10T20:07:09.505Z,1520712429.505 [BPC1] No Fault, FailCount= 1
2018-03-10T20:07:40.268Z,1520712460.268 [BPC1](FAULT): Failed to initialize
2018-03-10T20:07:40.268Z,1520712460.268 [BPC1] Communications Fault, FailCount= 2
2018-03-10T20:07:40.268Z,1520712460.268 [BPC1](ERROR): Communications Fault
2018-03-10T20:07:40.323Z,1520712460.323 [CBIT](ERROR): Communications Fault in component: BPC1
2018-03-10T20:07:41.508Z,1520712461.508 [CBIT](INFO): Clearing failed state for component BPC1
2018-03-10T20:07:41.508Z,1520712461.508 [BPC1] No Fault, FailCount= 2
2018-03-10T20:08:11.960Z,1520712491.960 [BPC1](FAULT): Failed to initialize
2018-03-10T20:08:11.960Z,1520712491.960 [BPC1] Communications Fault, FailCount= 3
2018-03-10T20:08:11.960Z,1520712491.960 [BPC1](ERROR): Communications Fault
2018-03-10T20:08:11.982Z,1520712491.982 [CBIT](ERROR): Communications Fault in component: BPC1
2018-03-10T20:08:13.186Z,1520712493.186 [CBIT](INFO): Clearing failed state for component BPC1
2018-03-10T20:08:13.186Z,1520712493.186 [BPC1] No Fault, FailCount= 3
2018-03-10T20:08:43.188Z,1520712523.188 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T20:08:43.188Z,1520712523.188 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 5
2018-03-10T20:08:43.188Z,1520712523.188 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-10T20:08:43.200Z,1520712523.200 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-10T20:08:43.587Z,1520712523.587 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-10T20:08:43.587Z,1520712523.587 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 5
2018-03-10T20:08:43.957Z,1520712523.957 [BPC1](FAULT): Failed to initialize
2018-03-10T20:08:43.957Z,1520712523.957 [BPC1] Communications Fault, FailCount= 4
2018-03-10T20:08:43.957Z,1520712523.957 [BPC1](ERROR): Communications Fault
2018-03-10T20:08:44.004Z,1520712524.004 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-10T20:08:44.004Z,1520712524.004 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-10T20:08:44.004Z,1520712524.004 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-10T20:08:44.028Z,1520712524.028 [CBIT](ERROR): Communications Fault in component: BPC1
2018-03-10T20:08:45.202Z,1520712525.202 [CBIT](INFO): Clearing failed state for component BPC1
2018-03-10T20:08:45.202Z,1520712525.202 [BPC1] No Fault, FailCount= 4
2018-03-10T20:09:45.338Z,1520712585.338 [BPC1](ERROR): Bank A: No match for stick 5 serial number:1717 in the onboard configuration file.
2018-03-10T20:09:45.338Z,1520712585.338 [BPC1](ERROR): Failed to parse Bank A battery data
2018-03-10T20:09:45.338Z,1520712585.338 [BPC1] Data Fault, FailCount= 1
2018-03-10T20:09:45.338Z,1520712585.338 [BPC1](ERROR): Data Fault
2018-03-10T20:09:45.422Z,1520712585.422 [CBIT](ERROR): Data Fault in component: BPC1
2018-03-10T20:09:46.591Z,1520712586.591 [CBIT](INFO): Clearing failed state for component BPC1
2018-03-10T20:09:46.591Z,1520712586.591 [BPC1] No Fault, FailCount= 1
2018-03-10T20:10:04.926Z,1520712604.926 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-03-10T20:10:04.926Z,1520712604.926 [Default:CheckIn:C.Wait] Stopped
2018-03-10T20:10:04.926Z,1520712604.926 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-03-10T20:10:04.926Z,1520712604.926 [Default:CheckIn:D] Running Loop=1
2018-03-10T20:10:05.328Z,1520712605.328 [Default:CheckIn:D] Stopped
2018-03-10T20:10:05.328Z,1520712605.328 [Default:CheckIn:E] Running Loop=1
2018-03-10T20:10:05.720Z,1520712605.720 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 890.790104 min 
2018-03-10T20:10:05.720Z,1520712605.720 [Default:CheckIn:E] Stopped
2018-03-10T20:10:05.720Z,1520712605.720 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-03-10T20:10:05.720Z,1520712605.720 [Default:CheckIn] Stopped
2018-03-10T20:10:05.720Z,1520712605.720 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-03-10T20:10:05.720Z,1520712605.720 [Default:CheckIn](INFO): Running loop #88
2018-03-10T20:10:05.720Z,1520712605.720 [Default:CheckIn] Running Loop=88
2018-03-10T20:10:05.721Z,1520712605.721 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-03-10T20:10:05.721Z,1520712605.721 [Default:CheckIn:Read_GPS] Running Loop=1
2018-03-10T20:10:06.472Z,1520712606.472 [NAL9602](INFO): Powering up
2018-03-10T20:10:17.420Z,1520712617.420 [NAL9602](INFO): NAL9602 initialized
2018-03-10T20:10:18.224Z,1520712618.224 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-03-10T20:10:18.224Z,1520712618.224 [NAL9602] Data Fault, FailCount= 1
2018-03-10T20:10:18.224Z,1520712618.224 [NAL9602](ERROR): Data Fault
2018-03-10T20:10:18.312Z,1520712618.312 [CBIT](ERROR): Data Fault in component: NAL9602
2018-03-10T20:10:18.620Z,1520712618.620 [NAL9602](INFO): Powering down
2018-03-10T20:10:19.517Z,1520712619.517 [CBIT](INFO): Clearing failed state for component NAL9602
2018-03-10T20:10:19.517Z,1520712619.517 [NAL9602] No Fault, FailCount= 1
2018-03-10T20:10:48.632Z,1520712648.632 [NAL9602](INFO): Powering up NAL9602
2018-03-10T20:10:59.816Z,1520712659.816 [NAL9602](INFO): NAL9602 initialized
2018-03-10T20:11:44.380Z,1520712704.380 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T20:11:44.380Z,1520712704.380 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 6
2018-03-10T20:11:44.380Z,1520712704.380 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-10T20:11:44.393Z,1520712704.393 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-10T20:11:44.794Z,1520712704.794 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-10T20:11:44.794Z,1520712704.794 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 6
2018-03-10T20:11:45.182Z,1520712705.182 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-10T20:11:45.182Z,1520712705.182 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-10T20:11:45.182Z,1520712705.182 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-10T20:12:56.433Z,1520712776.433 [NAL9602](INFO): SBD MO Status=2, MOMSN=5843, MT Status=2, MTMSN=0
2018-03-10T20:12:56.433Z,1520712776.433 [NAL9602](ERROR): Failed to initiate SBD session. Error code: 2
2018-03-10T20:14:45.518Z,1520712885.518 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T20:14:45.518Z,1520712885.518 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 7
2018-03-10T20:14:45.518Z,1520712885.518 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-10T20:14:45.530Z,1520712885.530 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-10T20:14:45.930Z,1520712885.930 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-10T20:14:45.930Z,1520712885.930 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 7
2018-03-10T20:14:46.327Z,1520712886.327 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-10T20:14:46.327Z,1520712886.327 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-10T20:14:46.327Z,1520712886.327 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-10T20:15:02.270Z,1520712902.270 [NAL9602](INFO): SBD MO Status=2, MOMSN=5843, MT Status=2, MTMSN=0
2018-03-10T20:15:02.270Z,1520712902.270 [NAL9602](ERROR): Failed to initiate SBD session. Error code: 2
2018-03-10T20:15:05.928Z,1520712905.928 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-03-10T20:10:05.7Z
2018-03-10T20:15:05.929Z,1520712905.929 [Default:CheckIn:Read_GPS] Stopped
2018-03-10T20:15:05.929Z,1520712905.929 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-03-10T20:15:10.059Z,1520712910.059 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20180310T051512/Courier0352.lzma
2018-03-10T20:15:10.858Z,1520712910.858 [DataOverHttps](INFO): Moved sent file to Logs/20180310T051512/Courier0352.lzma.bak
2018-03-10T20:15:10.858Z,1520712910.858 [DataOverHttps](INFO): SBD MOMSN=8007971
2018-03-10T20:15:30.717Z,1520712930.717 [DataOverHttps](INFO): Sending 245 bytes from file Logs/20180310T051512/Express0353.lzma
2018-03-10T20:15:31.618Z,1520712931.618 [DataOverHttps](INFO): Moved sent file to Logs/20180310T051512/Express0353.lzma.bak
2018-03-10T20:15:31.618Z,1520712931.618 [DataOverHttps](INFO): SBD MOMSN=8007975
2018-03-10T20:15:32.366Z,1520712932.366 [Default:CheckIn:Read_Iridium] Stopped
2018-03-10T20:15:32.366Z,1520712932.366 [Default:CheckIn:C.Wait] Running Loop=1
2018-03-10T20:15:32.366Z,1520712932.366 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-03-10T20:15:47.337Z,1520712947.337 [CBIT](DEBUG): EFC running - data check-sum false
2018-03-10T20:16:03.253Z,1520712963.253 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session.
2018-03-10T20:16:36.199Z,1520712996.199 [NAL9602](INFO): Powering down
2018-03-10T20:16:43.540Z,1520713003.540 [BPC1](ERROR): Failed to receive battery data
2018-03-10T20:16:43.540Z,1520713003.540 [BPC1] Communications Fault, FailCount= 1
2018-03-10T20:16:43.540Z,1520713003.540 [BPC1](ERROR): Communications Fault
2018-03-10T20:16:43.568Z,1520713003.568 [CBIT](ERROR): Communications Fault in component: BPC1
2018-03-10T20:16:44.814Z,1520713004.814 [CBIT](INFO): Clearing failed state for component BPC1
2018-03-10T20:16:44.814Z,1520713004.814 [BPC1] No Fault, FailCount= 1
2018-03-10T20:17:15.533Z,1520713035.533 [BPC1](FAULT): Failed to initialize
2018-03-10T20:17:15.533Z,1520713035.533 [BPC1] Communications Fault, FailCount= 2
2018-03-10T20:17:15.533Z,1520713035.533 [BPC1](ERROR): Communications Fault
2018-03-10T20:17:15.589Z,1520713035.589 [CBIT](ERROR): Communications Fault in component: BPC1
2018-03-10T20:17:16.778Z,1520713036.778 [CBIT](INFO): Clearing failed state for component BPC1
2018-03-10T20:17:16.778Z,1520713036.778 [BPC1] No Fault, FailCount= 2
2018-03-10T20:17:46.489Z,1520713066.489 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T20:17:46.489Z,1520713066.489 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 8
2018-03-10T20:17:46.489Z,1520713066.489 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-10T20:17:46.518Z,1520713066.518 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-10T20:17:46.895Z,1520713066.895 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-10T20:17:46.895Z,1520713066.895 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 8
2018-03-10T20:17:47.264Z,1520713067.264 [BPC1](FAULT): Failed to initialize
2018-03-10T20:17:47.265Z,1520713067.265 [BPC1] Communications Fault, FailCount= 3
2018-03-10T20:17:47.265Z,1520713067.265 [BPC1](ERROR): Communications Fault
2018-03-10T20:17:47.292Z,1520713067.292 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-10T20:17:47.293Z,1520713067.293 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-10T20:17:47.293Z,1520713067.293 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-10T20:17:47.313Z,1520713067.313 [CBIT](ERROR): Communications Fault in component: BPC1
2018-03-10T20:17:48.501Z,1520713068.501 [CBIT](INFO): Clearing failed state for component BPC1
2018-03-10T20:17:48.501Z,1520713068.501 [BPC1] No Fault, FailCount= 3
2018-03-10T20:18:19.273Z,1520713099.273 [BPC1](FAULT): Failed to initialize
2018-03-10T20:18:19.273Z,1520713099.273 [BPC1] Communications Fault, FailCount= 4
2018-03-10T20:18:19.273Z,1520713099.273 [BPC1](ERROR): Communications Fault
2018-03-10T20:18:19.308Z,1520713099.308 [CBIT](ERROR): Communications Fault in component: BPC1
2018-03-10T20:18:20.494Z,1520713100.494 [CBIT](INFO): Clearing failed state for component BPC1
2018-03-10T20:18:20.494Z,1520713100.494 [BPC1] No Fault, FailCount= 4
2018-03-10T20:18:50.929Z,1520713130.929 [BPC1](FAULT): Failed to initialize
2018-03-10T20:18:50.929Z,1520713130.929 [BPC1] Communications Fault, FailCount= 5
2018-03-10T20:18:50.929Z,1520713130.929 [BPC1](ERROR): Communications Fault
2018-03-10T20:18:50.954Z,1520713130.954 [CBIT](ERROR): Communications Fault in component: BPC1
2018-03-10T20:18:52.170Z,1520713132.170 [CBIT](INFO): Clearing failed state for component BPC1
2018-03-10T20:18:52.175Z,1520713132.175 [BPC1] No Fault, FailCount= 5
2018-03-10T20:20:17.773Z,1520713217.773 [CommandLine](IMPORTANT): got command burn on
2018-03-10T20:20:17.773Z,1520713217.773 [CommandLine](IMPORTANT): Activating dropweight wire
2018-03-10T20:20:21.769Z,1520713221.769 [CommandLine](IMPORTANT): got command burn off
2018-03-10T20:20:21.769Z,1520713221.769 [CommandLine](IMPORTANT): Deactivating dropweight wire
2018-03-10T20:20:32.688Z,1520713232.688 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-03-10T20:20:32.688Z,1520713232.688 [Default:CheckIn:C.Wait] Stopped
2018-03-10T20:20:32.688Z,1520713232.688 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-03-10T20:20:32.688Z,1520713232.688 [Default:CheckIn:D] Running Loop=1
2018-03-10T20:20:33.082Z,1520713233.082 [Default:CheckIn:D] Stopped
2018-03-10T20:20:33.082Z,1520713233.082 [Default:CheckIn:E] Running Loop=1
2018-03-10T20:20:33.494Z,1520713233.494 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 901.252669 min 
2018-03-10T20:20:33.494Z,1520713233.494 [Default:CheckIn:E] Stopped
2018-03-10T20:20:33.494Z,1520713233.494 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-03-10T20:20:33.494Z,1520713233.494 [Default:CheckIn] Stopped
2018-03-10T20:20:33.494Z,1520713233.494 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-03-10T20:20:33.494Z,1520713233.494 [Default:CheckIn](INFO): Running loop #89
2018-03-10T20:20:33.538Z,1520713233.538 [Default:CheckIn] Running Loop=89
2018-03-10T20:20:33.539Z,1520713233.539 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-03-10T20:20:33.539Z,1520713233.539 [Default:CheckIn:Read_GPS] Running Loop=1
2018-03-10T20:20:36.818Z,1520713236.818 [NAL9602](INFO): Powering up
2018-03-10T20:20:46.236Z,1520713246.236 [CommandLine](IMPORTANT): got command failComponent
2018-03-10T20:20:46.237Z,1520713246.237 [CommandLine](IMPORTANT): Failed components:
2018-03-10T20:20:46.237Z,1520713246.237 [CommandLine](IMPORTANT): No failed Components.
2018-03-10T20:20:47.660Z,1520713247.660 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T20:20:47.660Z,1520713247.660 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 9
2018-03-10T20:20:47.660Z,1520713247.660 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-10T20:20:47.672Z,1520713247.672 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-10T20:20:48.004Z,1520713248.004 [NAL9602](INFO): NAL9602 initialized
2018-03-10T20:20:48.069Z,1520713248.069 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-10T20:20:48.069Z,1520713248.069 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 9
2018-03-10T20:20:48.455Z,1520713248.455 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-10T20:20:48.455Z,1520713248.455 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-10T20:20:48.456Z,1520713248.456 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-10T20:21:20.004Z,1520713280.004 [NAL9602](ERROR): Failed to receive proper response when querying signal strength for MT queue check.
2018-03-10T20:21:20.083Z,1520713280.083 [NAL9602](FAULT): received: 
+CSQ:0

OK43, 2, 0, 0, 0

OK
2018-03-10T20:21:20.083Z,1520713280.083 [NAL9602] Data Fault, FailCount= 2
2018-03-10T20:21:20.083Z,1520713280.083 [NAL9602](ERROR): Data Fault
2018-03-10T20:21:20.204Z,1520713280.204 [CBIT](ERROR): Data Fault in component: NAL9602
2018-03-10T20:21:20.404Z,1520713280.404 [NAL9602](INFO): Powering down
2018-03-10T20:21:21.279Z,1520713281.279 [CBIT](INFO): Clearing failed state for component NAL9602
2018-03-10T20:21:21.279Z,1520713281.279 [NAL9602] No Fault, FailCount= 2
2018-03-10T20:21:50.444Z,1520713310.444 [NAL9602](INFO): Powering up NAL9602
2018-03-10T20:22:01.649Z,1520713321.649 [NAL9602](INFO): NAL9602 initialized
2018-03-10T20:22:02.444Z,1520713322.444 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-03-10T20:22:02.444Z,1520713322.444 [NAL9602] Data Fault, FailCount= 3
2018-03-10T20:22:02.444Z,1520713322.444 [NAL9602](ERROR): Data Fault
2018-03-10T20:22:02.540Z,1520713322.540 [CBIT](ERROR): Data Fault in component: NAL9602
2018-03-10T20:22:02.840Z,1520713322.840 [NAL9602](INFO): Powering down
2018-03-10T20:22:03.697Z,1520713323.697 [CBIT](INFO): Clearing failed state for component NAL9602
2018-03-10T20:22:03.697Z,1520713323.697 [NAL9602] No Fault, FailCount= 3
2018-03-10T20:22:32.844Z,1520713352.844 [NAL9602](INFO): Powering up NAL9602
2018-03-10T20:22:43.816Z,1520713363.816 [NAL9602](INFO): NAL9602 initialized
2018-03-10T20:23:48.732Z,1520713428.732 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T20:23:48.732Z,1520713428.732 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 10
2018-03-10T20:23:48.733Z,1520713428.733 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-10T20:23:48.761Z,1520713428.761 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-10T20:23:49.158Z,1520713429.158 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-10T20:23:49.158Z,1520713429.158 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 10
2018-03-10T20:23:49.532Z,1520713429.532 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-10T20:23:49.532Z,1520713429.532 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-10T20:23:49.532Z,1520713429.532 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-10T20:25:33.618Z,1520713533.618 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-03-10T20:20:33.5Z
2018-03-10T20:25:33.623Z,1520713533.623 [Default:CheckIn:Read_GPS] Stopped
2018-03-10T20:25:33.623Z,1520713533.623 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-03-10T20:25:37.907Z,1520713537.907 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20180310T051512/Courier0356.lzma
2018-03-10T20:25:38.654Z,1520713538.654 [DataOverHttps](INFO): Moved sent file to Logs/20180310T051512/Courier0356.lzma.bak
2018-03-10T20:25:38.654Z,1520713538.654 [DataOverHttps](INFO): SBD MOMSN=8008041
2018-03-10T20:25:48.807Z,1520713548.807 [CBIT](DEBUG): EFC running - data check-sum false
2018-03-10T20:25:49.224Z,1520713549.224 [DataOverHttps](INFO): Sending 388 bytes from file Logs/20180310T051512/Express0357.lzma
2018-03-10T20:25:50.391Z,1520713550.391 [DataOverHttps](INFO): Moved sent file to Logs/20180310T051512/Express0357.lzma.bak
2018-03-10T20:25:50.391Z,1520713550.391 [DataOverHttps](INFO): SBD MOMSN=8008049
2018-03-10T20:25:50.965Z,1520713550.965 [Default:CheckIn:Read_Iridium] Stopped
2018-03-10T20:25:50.965Z,1520713550.965 [Default:CheckIn:C.Wait] Running Loop=1
2018-03-10T20:25:50.965Z,1520713550.965 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-03-10T20:25:54.115Z,1520713554.115 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session.
2018-03-10T20:26:20.661Z,1520713580.661 [BPC1](ERROR): Failed to receive battery data
2018-03-10T20:26:20.662Z,1520713580.662 [BPC1] Communications Fault, FailCount= 1
2018-03-10T20:26:20.662Z,1520713580.662 [BPC1](ERROR): Communications Fault
2018-03-10T20:26:20.717Z,1520713580.717 [CBIT](ERROR): Communications Fault in component: BPC1
2018-03-10T20:26:21.912Z,1520713581.912 [CBIT](INFO): Clearing failed state for component BPC1
2018-03-10T20:26:21.912Z,1520713581.912 [BPC1] No Fault, FailCount= 1
2018-03-10T20:26:24.612Z,1520713584.612 [NAL9602](INFO): Powering down
2018-03-10T20:26:49.868Z,1520713609.868 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T20:26:49.869Z,1520713609.869 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 11
2018-03-10T20:26:49.869Z,1520713609.869 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-10T20:26:49.903Z,1520713609.903 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-10T20:26:50.278Z,1520713610.278 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-10T20:26:50.278Z,1520713610.278 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 11
2018-03-10T20:26:50.668Z,1520713610.668 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-10T20:26:50.668Z,1520713610.668 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-10T20:26:50.668Z,1520713610.668 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-10T20:26:54.753Z,1520713614.753 [BPC1](FAULT): Failed to initialize
2018-03-10T20:26:54.753Z,1520713614.753 [BPC1] Communications Fault, FailCount= 2
2018-03-10T20:26:54.753Z,1520713614.753 [BPC1](ERROR): Communications Fault
2018-03-10T20:26:54.776Z,1520713614.776 [CBIT](ERROR): Communications Fault in component: BPC1
2018-03-10T20:26:55.642Z,1520713615.642 [CBIT](INFO): Clearing failed state for component BPC1
2018-03-10T20:26:55.642Z,1520713615.642 [BPC1] No Fault, FailCount= 2
2018-03-10T20:27:26.429Z,1520713646.429 [BPC1](FAULT): Failed to initialize
2018-03-10T20:27:26.429Z,1520713646.429 [BPC1] Communications Fault, FailCount= 3
2018-03-10T20:27:26.429Z,1520713646.429 [BPC1](ERROR): Communications Fault
2018-03-10T20:27:26.467Z,1520713646.467 [CBIT](ERROR): Communications Fault in component: BPC1
2018-03-10T20:27:27.648Z,1520713647.648 [CBIT](INFO): Clearing failed state for component BPC1
2018-03-10T20:27:27.648Z,1520713647.648 [BPC1] No Fault, FailCount= 3
2018-03-10T20:27:58.224Z,1520713678.224 [BPC1](FAULT): Failed to initialize
2018-03-10T20:27:58.224Z,1520713678.224 [BPC1] Communications Fault, FailCount= 4
2018-03-10T20:27:58.225Z,1520713678.225 [BPC1](ERROR): Communications Fault
2018-03-10T20:27:58.246Z,1520713678.246 [CBIT](ERROR): Communications Fault in component: BPC1
2018-03-10T20:27:59.464Z,1520713679.464 [CBIT](INFO): Clearing failed state for component BPC1
2018-03-10T20:27:59.464Z,1520713679.464 [BPC1] No Fault, FailCount= 4
2018-03-10T20:29:50.829Z,1520713790.829 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T20:29:50.829Z,1520713790.829 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 12
2018-03-10T20:29:50.829Z,1520713790.829 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-10T20:29:50.842Z,1520713790.842 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-10T20:29:51.243Z,1520713791.243 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-10T20:29:51.243Z,1520713791.243 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 12
2018-03-10T20:29:51.667Z,1520713791.667 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-10T20:29:51.668Z,1520713791.668 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-10T20:29:51.668Z,1520713791.668 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-10T20:30:51.270Z,1520713851.270 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-03-10T20:30:51.270Z,1520713851.270 [Default:CheckIn:C.Wait] Stopped
2018-03-10T20:30:51.270Z,1520713851.270 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-03-10T20:30:51.271Z,1520713851.271 [Default:CheckIn:D] Running Loop=1
2018-03-10T20:30:51.669Z,1520713851.669 [Default:CheckIn:D] Stopped
2018-03-10T20:30:51.669Z,1520713851.669 [Default:CheckIn:E] Running Loop=1
2018-03-10T20:30:52.063Z,1520713852.063 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 911.562500 min 
2018-03-10T20:30:52.064Z,1520713852.064 [Default:CheckIn:E] Stopped
2018-03-10T20:30:52.064Z,1520713852.064 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-03-10T20:30:52.064Z,1520713852.064 [Default:CheckIn] Stopped
2018-03-10T20:30:52.064Z,1520713852.064 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-03-10T20:30:52.064Z,1520713852.064 [Default:CheckIn](INFO): Running loop #90
2018-03-10T20:30:52.064Z,1520713852.064 [Default:CheckIn] Running Loop=90
2018-03-10T20:30:52.064Z,1520713852.064 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-03-10T20:30:52.064Z,1520713852.064 [Default:CheckIn:Read_GPS] Running Loop=1
2018-03-10T20:30:55.406Z,1520713855.406 [NAL9602](INFO): Powering up
2018-03-10T20:31:06.549Z,1520713866.549 [NAL9602](INFO): NAL9602 initialized
2018-03-10T20:31:38.572Z,1520713898.572 [NAL9602](ERROR): Failed to receive proper response when querying signal strength for MT queue check.
2018-03-10T20:31:38.655Z,1520713898.655 [NAL9602](FAULT): received: 
+CSQ:0

OK43, 2, 0, 0, 0

OK
2018-03-10T20:31:38.655Z,1520713898.655 [NAL9602] Data Fault, FailCount= 4
2018-03-10T20:31:38.655Z,1520713898.655 [NAL9602](ERROR): Data Fault
2018-03-10T20:31:38.732Z,1520713898.732 [CBIT](ERROR): Data Fault in component: NAL9602
2018-03-10T20:31:38.944Z,1520713898.944 [NAL9602](INFO): Powering down
2018-03-10T20:31:39.820Z,1520713899.820 [CBIT](INFO): Clearing failed state for component NAL9602
2018-03-10T20:31:39.820Z,1520713899.820 [NAL9602] No Fault, FailCount= 4
2018-03-10T20:32:09.104Z,1520713929.104 [NAL9602](INFO): Powering up NAL9602
2018-03-10T20:32:19.905Z,1520713939.905 [NAL9602](INFO): NAL9602 initialized
2018-03-10T20:32:51.948Z,1520713971.948 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T20:32:51.948Z,1520713971.948 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 13
2018-03-10T20:32:51.948Z,1520713971.948 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-10T20:32:51.960Z,1520713971.960 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-10T20:32:52.368Z,1520713972.368 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-10T20:32:52.368Z,1520713972.368 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 13
2018-03-10T20:32:55.550Z,1520713975.550 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-10T20:32:55.551Z,1520713975.551 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-10T20:32:55.551Z,1520713975.551 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-10T20:34:26.910Z,1520714066.910 [BPC1](ERROR): Bank B: No match for stick 6 serial number:1717 in the onboard configuration file.
2018-03-10T20:34:26.910Z,1520714066.910 [BPC1](ERROR): Failed to parse Bank B battery data
2018-03-10T20:34:26.910Z,1520714066.910 [BPC1] Data Fault, FailCount= 1
2018-03-10T20:34:26.910Z,1520714066.910 [BPC1](ERROR): Data Fault
2018-03-10T20:34:26.949Z,1520714066.949 [CBIT](ERROR): Data Fault in component: BPC1
2018-03-10T20:34:28.168Z,1520714068.168 [CBIT](INFO): Clearing failed state for component BPC1
2018-03-10T20:34:28.168Z,1520714068.168 [BPC1] No Fault, FailCount= 1
2018-03-10T20:35:48.853Z,1520714148.853 [CBIT](DEBUG): EFC running - data check-sum false
2018-03-10T20:35:52.441Z,1520714152.441 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-03-10T20:30:52.1Z
2018-03-10T20:35:52.441Z,1520714152.441 [Default:CheckIn:Read_GPS] Stopped
2018-03-10T20:35:52.441Z,1520714152.441 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-03-10T20:35:56.250Z,1520714156.250 [BPC1](ERROR): Failed to receive battery data
2018-03-10T20:35:56.250Z,1520714156.250 [BPC1] Communications Fault, FailCount= 1
2018-03-10T20:35:56.250Z,1520714156.250 [BPC1](ERROR): Communications Fault
2018-03-10T20:35:56.263Z,1520714156.263 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T20:35:56.263Z,1520714156.263 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 14
2018-03-10T20:35:56.263Z,1520714156.263 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-10T20:35:56.320Z,1520714156.320 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-10T20:35:56.321Z,1520714156.321 [CBIT](ERROR): Communications Fault in component: BPC1
2018-03-10T20:35:56.470Z,1520714156.470 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-10T20:35:56.470Z,1520714156.470 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 14
2018-03-10T20:35:56.735Z,1520714156.735 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20180310T051512/Courier0360.lzma
2018-03-10T20:35:56.809Z,1520714156.809 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-10T20:35:56.810Z,1520714156.810 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-10T20:35:56.810Z,1520714156.810 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-10T20:35:57.212Z,1520714157.212 [CBIT](INFO): Clearing failed state for component BPC1
2018-03-10T20:35:57.212Z,1520714157.212 [BPC1] No Fault, FailCount= 1
2018-03-10T20:35:57.534Z,1520714157.534 [DataOverHttps](INFO): Moved sent file to Logs/20180310T051512/Courier0360.lzma.bak
2018-03-10T20:35:57.534Z,1520714157.534 [DataOverHttps](INFO): SBD MOMSN=8008127
2018-03-10T20:35:57.776Z,1520714157.776 [CommandLine](IMPORTANT): got command ! /etc/rc.d/init.d/settime restart
2018-03-10T20:35:24.200Z,1520714124.200 [CommandLine](IMPORTANT): settime stop or restart
Setting hardware clock from system clock
Sat Mar 10 20:35:58 2018  0.000000 seconds
settime start or restart
Setting clock frequency and tick values from nonvolatile memory.
    mode:         16386
-o  offset:       0
-f  frequency:    1106212
    maxerror:     16000000
    esterror:     16000000
    status:       64 (UNSYNC)
-p  timeconstant: 2
    precision:    1
    tolerance:    32768000
-t  tick:         10000
    time.tv_sec:  1520714158
    time.tv_usec: 359681
    return value: 5 (clock not synchronized)
ping returned from NTP server: 216.239.35.0
43167 74159.868  174266.0      0.0  -36572769.7    259.4   1106212
Time set from NTP server: 216.239.35.0
Setting hardware clock from system clock
Sat Mar 10 20:35:24 2018  0.000000 seconds

2018-03-10T20:36:05.975Z,1520714165.975 [DataOverHttps](INFO): Sending 266 bytes from file Logs/20180310T051512/Express0361.lzma
2018-03-10T20:36:06.890Z,1520714166.890 [DataOverHttps](INFO): Moved sent file to Logs/20180310T051512/Express0361.lzma.bak
2018-03-10T20:36:06.890Z,1520714166.890 [DataOverHttps](INFO): SBD MOMSN=8008129
2018-03-10T20:36:07.645Z,1520714167.645 [Default:CheckIn:Read_Iridium] Stopped
2018-03-10T20:36:07.645Z,1520714167.645 [Default:CheckIn:C.Wait] Running Loop=1
2018-03-10T20:36:07.645Z,1520714167.645 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-03-10T20:36:11.384Z,1520714171.384 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session.
2018-03-10T20:36:27.909Z,1520714187.909 [BPC1](FAULT): Failed to initialize
2018-03-10T20:36:27.909Z,1520714187.909 [BPC1] Communications Fault, FailCount= 2
2018-03-10T20:36:27.909Z,1520714187.909 [BPC1](ERROR): Communications Fault
2018-03-10T20:36:27.932Z,1520714187.932 [CBIT](ERROR): Communications Fault in component: BPC1
2018-03-10T20:36:29.142Z,1520714189.142 [CBIT](INFO): Clearing failed state for component BPC1
2018-03-10T20:36:29.142Z,1520714189.142 [BPC1] No Fault, FailCount= 2
2018-03-10T20:36:41.868Z,1520714201.868 [NAL9602](INFO): Powering down
2018-03-10T20:36:59.908Z,1520714219.908 [BPC1](FAULT): Failed to initialize
2018-03-10T20:36:59.908Z,1520714219.908 [BPC1] Communications Fault, FailCount= 3
2018-03-10T20:36:59.908Z,1520714219.908 [BPC1](ERROR): Communications Fault
2018-03-10T20:36:59.959Z,1520714219.959 [CBIT](ERROR): Communications Fault in component: BPC1
2018-03-10T20:37:01.128Z,1520714221.128 [CBIT](INFO): Clearing failed state for component BPC1
2018-03-10T20:37:01.128Z,1520714221.128 [BPC1] No Fault, FailCount= 3
2018-03-10T20:37:03.677Z,1520714223.677 [CommandLine](IMPORTANT): got command ibit
2018-03-10T20:37:03.950Z,1520714223.950 [IBIT](IMPORTANT): Beginning Initiated BIT
2018-03-10T20:37:03.950Z,1520714223.950 [IBIT](IMPORTANT): Beginning control surface checks.
2018-03-10T20:37:03.970Z,1520714223.970 [CBIT](IMPORTANT): Beginning ground fault scan
2018-03-10T20:37:04.277Z,1520714224.277 [NAL9602](INFO): Powering up
2018-03-10T20:37:15.341Z,1520714235.341 [NAL9602](INFO): NAL9602 initialized
2018-03-10T20:37:16.161Z,1520714236.161 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-03-10T20:37:16.161Z,1520714236.161 [NAL9602] Data Fault, FailCount= 5
2018-03-10T20:37:16.161Z,1520714236.161 [NAL9602](ERROR): Data Fault
2018-03-10T20:37:16.340Z,1520714236.340 [CBIT](ERROR): Data Fault in component: NAL9602
2018-03-10T20:37:16.340Z,1520714236.340 [CBIT](CRITICAL): Data Fault in component: NAL9602
2018-03-10T20:37:16.540Z,1520714236.540 [NAL9602](INFO): Powering down
2018-03-10T20:37:16.694Z,1520714236.694 [CBIT](INFO): Critical error at 20180310T203716
2018-03-10T20:37:17.099Z,1520714237.099 [CBIT](IMPORTANT): No ground fault detected
mA:
CHAN A0 (Batt): -0.008762
CHAN A1 (24V): -0.012142
CHAN A2 (12V): 0.000430
CHAN A3 (5V): -0.001348
CHAN B0 (3.3V): -0.000334
CHAN B1 (3.15aV): -0.001006
CHAN B2 (3.15bV): -0.001169
CHAN B3 (GND): -0.001808
OPEN: 0.003963
Full Scale Calc: 4.765 mA, -1.589 mA
2018-03-10T20:38:54.704Z,1520714334.704 [IBIT](FAULT): Error acquiring IBIT communications status. Timeout expired.
2018-03-10T20:38:55.049Z,1520714335.049 [IBIT](FAULT): Warning: Battery Data not active. Expected only when running primaries. Threshold checking not active.
2018-03-10T20:38:55.427Z,1520714335.427 [IBIT](IMPORTANT): bitHumidityThreshold: 55.000000 %
2018-03-10T20:38:55.427Z,1520714335.427 [IBIT](IMPORTANT): bitPressureThreshold: 0.750000 psi
2018-03-10T20:38:55.427Z,1520714335.427 [IBIT](IMPORTANT): Pressure:10.910439 PSI
2018-03-10T20:38:55.428Z,1520714335.428 [IBIT](IMPORTANT): Humidity:6.757417 %
2018-03-10T20:38:55.835Z,1520714335.835 [IBIT](IMPORTANT): surfaceThreshold: 1.000000 m
2018-03-10T20:38:55.836Z,1520714335.836 [IBIT](IMPORTANT): buoyancyNeutral: 300.000000 cc
2018-03-10T20:38:55.836Z,1520714335.836 [IBIT](IMPORTANT): massDefault: 1.500000 cm
2018-03-10T20:38:55.836Z,1520714335.836 [IBIT](IMPORTANT): stopDepth: 112.000000 m
2018-03-10T20:38:55.836Z,1520714335.836 [IBIT](IMPORTANT): abortDepth: 130.000000 m
2018-03-10T20:38:55.836Z,1520714335.836 [IBIT](IMPORTANT): IBIT FAILED
2018-03-10T20:38:57.026Z,1520714337.026 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T20:38:57.027Z,1520714337.027 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 15
2018-03-10T20:38:57.027Z,1520714337.027 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-10T20:38:57.039Z,1520714337.039 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-10T20:38:57.450Z,1520714337.450 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-10T20:38:57.451Z,1520714337.451 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 15
2018-03-10T20:38:57.805Z,1520714337.805 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-10T20:38:57.806Z,1520714337.806 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-10T20:38:57.806Z,1520714337.806 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-10T20:39:16.352Z,1520714356.352 [CBIT](INFO): Clearing failed state for component NAL9602
2018-03-10T20:39:16.352Z,1520714356.352 [NAL9602] No Fault, FailCount= 5
2018-03-10T20:39:16.700Z,1520714356.700 [NAL9602](INFO): Powering up NAL9602
2018-03-10T20:39:27.912Z,1520714367.912 [NAL9602](INFO): NAL9602 initialized
2018-03-10T20:39:28.300Z,1520714368.300 [NAL9602](INFO): Failure count cleared after critical for NAL9602
2018-03-10T20:39:59.100Z,1520714399.100 [NAL9602](INFO): Powering down
2018-03-10T20:41:07.972Z,1520714467.972 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-03-10T20:41:07.972Z,1520714467.972 [Default:CheckIn:C.Wait] Stopped
2018-03-10T20:41:07.972Z,1520714467.972 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-03-10T20:41:07.972Z,1520714467.972 [Default:CheckIn:D] Running Loop=1
2018-03-10T20:41:08.370Z,1520714468.370 [Default:CheckIn:D] Stopped
2018-03-10T20:41:08.370Z,1520714468.370 [Default:CheckIn:E] Running Loop=1
2018-03-10T20:41:08.773Z,1520714468.773 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 921.840820 min 
2018-03-10T20:41:08.773Z,1520714468.773 [Default:CheckIn:E] Stopped
2018-03-10T20:41:08.773Z,1520714468.773 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-03-10T20:41:08.773Z,1520714468.773 [Default:CheckIn] Stopped
2018-03-10T20:41:08.773Z,1520714468.773 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-03-10T20:41:08.773Z,1520714468.773 [Default:CheckIn](INFO): Running loop #91
2018-03-10T20:41:08.774Z,1520714468.774 [Default:CheckIn] Running Loop=91
2018-03-10T20:41:08.774Z,1520714468.774 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-03-10T20:41:08.774Z,1520714468.774 [Default:CheckIn:Read_GPS] Running Loop=1
2018-03-10T20:41:09.528Z,1520714469.528 [NAL9602](INFO): Powering up
2018-03-10T20:41:20.464Z,1520714480.464 [NAL9602](INFO): NAL9602 initialized
2018-03-10T20:41:58.140Z,1520714518.140 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T20:41:58.140Z,1520714518.140 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 16
2018-03-10T20:41:58.140Z,1520714518.140 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-10T20:41:58.169Z,1520714518.169 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-10T20:41:58.614Z,1520714518.614 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-10T20:41:58.614Z,1520714518.614 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 16
2018-03-10T20:41:58.914Z,1520714518.914 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-10T20:41:58.915Z,1520714518.915 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-10T20:41:58.919Z,1520714518.919 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-10T20:42:59.082Z,1520714579.082 [NAL9602](INFO): SBD MO Status=0, MOMSN=5843, MT Status=0, MTMSN=0
2018-03-10T20:42:59.082Z,1520714579.082 [NAL9602](INFO): No messages in MT queue
2018-03-10T20:44:59.176Z,1520714699.176 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T20:44:59.177Z,1520714699.177 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 17
2018-03-10T20:44:59.177Z,1520714699.177 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-10T20:44:59.209Z,1520714699.209 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-10T20:44:59.561Z,1520714699.561 [BPC1](ERROR): Failed to receive battery data
2018-03-10T20:44:59.561Z,1520714699.561 [BPC1] Communications Fault, FailCount= 1
2018-03-10T20:44:59.561Z,1520714699.561 [BPC1](ERROR): Communications Fault
2018-03-10T20:44:59.629Z,1520714699.629 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-10T20:44:59.629Z,1520714699.629 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 17
2018-03-10T20:44:59.630Z,1520714699.630 [CBIT](ERROR): Communications Fault in component: BPC1
2018-03-10T20:44:59.954Z,1520714699.954 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-10T20:44:59.954Z,1520714699.954 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-10T20:44:59.954Z,1520714699.954 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-10T20:45:00.851Z,1520714700.851 [CBIT](INFO): Clearing failed state for component BPC1
2018-03-10T20:45:00.852Z,1520714700.852 [BPC1] No Fault, FailCount= 1
2018-03-10T20:45:15.088Z,1520714715.088 [NAL9602](INFO): GPS fix at 20180310T204514: (21.311599, -157.874455)
2018-03-10T20:45:15.182Z,1520714715.182 [Default:CheckIn:Read_GPS] Stopped
2018-03-10T20:45:15.182Z,1520714715.182 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-03-10T20:45:22.371Z,1520714722.371 [DataOverHttps](INFO): Sending 105 bytes from file Logs/20180310T051512/Courier0364.lzma
2018-03-10T20:45:23.170Z,1520714723.170 [DataOverHttps](INFO): Moved sent file to Logs/20180310T051512/Courier0364.lzma.bak
2018-03-10T20:45:23.171Z,1520714723.171 [DataOverHttps](INFO): SBD MOMSN=8008207
2018-03-10T20:45:31.595Z,1520714731.595 [BPC1](FAULT): Failed to initialize
2018-03-10T20:45:31.596Z,1520714731.596 [BPC1] Communications Fault, FailCount= 2
2018-03-10T20:45:31.596Z,1520714731.596 [BPC1](ERROR): Communications Fault
2018-03-10T20:45:31.644Z,1520714731.644 [CBIT](ERROR): Communications Fault in component: BPC1
2018-03-10T20:45:32.853Z,1520714732.853 [CBIT](INFO): Clearing failed state for component BPC1
2018-03-10T20:45:32.853Z,1520714732.853 [BPC1] No Fault, FailCount= 2
2018-03-10T20:45:39.490Z,1520714739.490 [DataOverHttps](INFO): Sending 1177 bytes from file Logs/20180310T051512/Express0365.lzma
2018-03-10T20:45:40.286Z,1520714740.286 [DataOverHttps](INFO): Moved sent file to Logs/20180310T051512/Express0365.lzma.bak
2018-03-10T20:45:40.286Z,1520714740.286 [DataOverHttps](INFO): SBD MOMSN=8008214
2018-03-10T20:45:41.214Z,1520714741.214 [Default:CheckIn:Read_Iridium] Stopped
2018-03-10T20:45:41.214Z,1520714741.214 [Default:CheckIn:C.Wait] Running Loop=1
2018-03-10T20:45:41.214Z,1520714741.214 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-03-10T20:45:46.736Z,1520714746.736 [NAL9602](INFO): Powering down
2018-03-10T20:45:49.210Z,1520714749.210 [CBIT](DEBUG): EFC running - data check-sum false
2018-03-10T20:46:03.583Z,1520714763.583 [BPC1](FAULT): Failed to initialize
2018-03-10T20:46:03.583Z,1520714763.583 [BPC1] Communications Fault, FailCount= 3
2018-03-10T20:46:03.583Z,1520714763.583 [BPC1](ERROR): Communications Fault
2018-03-10T20:46:03.654Z,1520714763.654 [CBIT](ERROR): Communications Fault in component: BPC1
2018-03-10T20:46:04.847Z,1520714764.847 [CBIT](INFO): Clearing failed state for component BPC1
2018-03-10T20:46:04.847Z,1520714764.847 [BPC1] No Fault, FailCount= 3
2018-03-10T20:46:12.065Z,1520714772.065 [CommandLine](INFO): End of History
2018-03-10T20:46:35.573Z,1520714795.573 [BPC1](FAULT): Failed to initialize
2018-03-10T20:46:35.573Z,1520714795.573 [BPC1] Communications Fault, FailCount= 4
2018-03-10T20:46:35.573Z,1520714795.573 [BPC1](ERROR): Communications Fault
2018-03-10T20:46:35.676Z,1520714795.676 [CBIT](ERROR): Communications Fault in component: BPC1
2018-03-10T20:46:36.836Z,1520714796.836 [CBIT](INFO): Clearing failed state for component BPC1
2018-03-10T20:46:36.836Z,1520714796.836 [BPC1] No Fault, FailCount= 4
2018-03-10T20:48:00.368Z,1520714880.368 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T20:48:00.369Z,1520714880.369 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 1
2018-03-10T20:48:00.369Z,1520714880.369 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-10T20:48:00.388Z,1520714880.388 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-10T20:48:00.763Z,1520714880.763 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-10T20:48:00.763Z,1520714880.763 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 1
2018-03-10T20:48:01.138Z,1520714881.138 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-10T20:48:01.138Z,1520714881.138 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-10T20:48:01.139Z,1520714881.139 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-10T20:50:41.694Z,1520715041.694 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-03-10T20:50:41.694Z,1520715041.694 [Default:CheckIn:C.Wait] Stopped
2018-03-10T20:50:41.695Z,1520715041.695 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-03-10T20:50:41.695Z,1520715041.695 [Default:CheckIn:D] Running Loop=1
2018-03-10T20:50:42.077Z,1520715042.077 [Default:CheckIn:D] Stopped
2018-03-10T20:50:42.077Z,1520715042.077 [Default:CheckIn:E] Running Loop=1
2018-03-10T20:50:42.471Z,1520715042.471 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 931.402604 min 
2018-03-10T20:50:42.500Z,1520715042.500 [Default:CheckIn:E] Stopped
2018-03-10T20:50:42.500Z,1520715042.500 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-03-10T20:50:42.500Z,1520715042.500 [Default:CheckIn] Stopped
2018-03-10T20:50:42.500Z,1520715042.500 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-03-10T20:50:42.500Z,1520715042.500 [Default:CheckIn](INFO): Running loop #92
2018-03-10T20:50:42.500Z,1520715042.500 [Default:CheckIn] Running Loop=92
2018-03-10T20:50:42.501Z,1520715042.501 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-03-10T20:50:42.501Z,1520715042.501 [Default:CheckIn:Read_GPS] Running Loop=1
2018-03-10T20:50:43.216Z,1520715043.216 [NAL9602](INFO): Powering up
2018-03-10T20:50:54.376Z,1520715054.376 [NAL9602](INFO): NAL9602 initialized
2018-03-10T20:51:01.253Z,1520715061.253 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T20:51:01.253Z,1520715061.253 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 2
2018-03-10T20:51:01.254Z,1520715061.254 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-10T20:51:01.266Z,1520715061.266 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-10T20:51:01.679Z,1520715061.679 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-10T20:51:01.679Z,1520715061.679 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 2
2018-03-10T20:51:02.065Z,1520715062.065 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-10T20:51:02.066Z,1520715062.066 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-10T20:51:02.066Z,1520715062.066 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-10T20:52:07.996Z,1520715127.996 [NAL9602](INFO): SBD MO Status=2, MOMSN=5844, MT Status=2, MTMSN=0
2018-03-10T20:52:07.996Z,1520715127.996 [NAL9602](ERROR): Failed to initiate SBD session. Error code: 2
2018-03-10T20:52:17.590Z,1520715137.590 [NAL9602](INFO): SBD MO Status=0, MOMSN=5844, MT Status=0, MTMSN=0
2018-03-10T20:52:17.590Z,1520715137.590 [NAL9602](INFO): No messages in MT queue
2018-03-10T20:52:18.797Z,1520715138.797 [NAL9602](INFO): GPS fix at 20180310T205217: (21.311692, -157.874392)
2018-03-10T20:52:18.881Z,1520715138.881 [Default:CheckIn:Read_GPS] Stopped
2018-03-10T20:52:18.881Z,1520715138.881 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-03-10T20:52:26.043Z,1520715146.043 [DataOverHttps](INFO): Sending 63 bytes from file Logs/20180310T051512/Courier0368.lzma
2018-03-10T20:52:26.842Z,1520715146.842 [DataOverHttps](INFO): Moved sent file to Logs/20180310T051512/Courier0368.lzma.bak
2018-03-10T20:52:26.842Z,1520715146.842 [DataOverHttps](INFO): SBD MOMSN=8008253
2018-03-10T20:52:39.719Z,1520715159.719 [DataOverHttps](INFO): Sending 159 bytes from file Logs/20180310T051512/Express0369.lzma
2018-03-10T20:52:40.510Z,1520715160.510 [DataOverHttps](INFO): Moved sent file to Logs/20180310T051512/Express0369.lzma.bak
2018-03-10T20:52:40.510Z,1520715160.510 [DataOverHttps](INFO): SBD MOMSN=8008256
2018-03-10T20:52:41.469Z,1520715161.469 [Default:CheckIn:Read_Iridium] Stopped
2018-03-10T20:52:41.469Z,1520715161.469 [Default:CheckIn:C.Wait] Running Loop=1
2018-03-10T20:52:41.469Z,1520715161.469 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-03-10T20:52:55.768Z,1520715175.768 [NAL9602](INFO): Powering down
2018-03-10T20:54:02.136Z,1520715242.136 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T20:54:02.136Z,1520715242.136 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 1
2018-03-10T20:54:02.136Z,1520715242.136 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-10T20:54:02.197Z,1520715242.197 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-10T20:54:02.599Z,1520715242.599 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-10T20:54:02.599Z,1520715242.599 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 1
2018-03-10T20:54:02.933Z,1520715242.933 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-10T20:54:02.933Z,1520715242.933 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-10T20:54:02.934Z,1520715242.934 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-10T20:54:31.300Z,1520715271.300 [BPC1](ERROR): Failed to receive battery data
2018-03-10T20:54:31.300Z,1520715271.300 [BPC1] Communications Fault, FailCount= 1
2018-03-10T20:54:31.300Z,1520715271.300 [BPC1](ERROR): Communications Fault
2018-03-10T20:54:31.409Z,1520715271.409 [CBIT](ERROR): Communications Fault in component: BPC1
2018-03-10T20:54:32.610Z,1520715272.610 [CBIT](INFO): Clearing failed state for component BPC1
2018-03-10T20:54:32.610Z,1520715272.610 [BPC1] No Fault, FailCount= 1
2018-03-10T20:55:03.206Z,1520715303.206 [BPC1](FAULT): Failed to initialize
2018-03-10T20:55:03.206Z,1520715303.206 [BPC1] Communications Fault, FailCount= 2
2018-03-10T20:55:03.206Z,1520715303.206 [BPC1](ERROR): Communications Fault
2018-03-10T20:55:03.302Z,1520715303.302 [CBIT](ERROR): Communications Fault in component: BPC1
2018-03-10T20:55:04.440Z,1520715304.440 [CBIT](INFO): Clearing failed state for component BPC1
2018-03-10T20:55:04.440Z,1520715304.440 [BPC1] No Fault, FailCount= 2
2018-03-10T20:55:35.211Z,1520715335.211 [BPC1](FAULT): Failed to initialize
2018-03-10T20:55:35.211Z,1520715335.211 [BPC1] Communications Fault, FailCount= 3
2018-03-10T20:55:35.212Z,1520715335.212 [BPC1](ERROR): Communications Fault
2018-03-10T20:55:35.282Z,1520715335.282 [CBIT](ERROR): Communications Fault in component: BPC1
2018-03-10T20:55:36.469Z,1520715336.469 [CBIT](INFO): Clearing failed state for component BPC1
2018-03-10T20:55:36.470Z,1520715336.470 [BPC1] No Fault, FailCount= 3
2018-03-10T20:55:49.593Z,1520715349.593 [CBIT](DEBUG): EFC running - data check-sum false
2018-03-10T20:56:07.148Z,1520715367.148 [BPC1](FAULT): Failed to initialize
2018-03-10T20:56:07.148Z,1520715367.148 [BPC1] Communications Fault, FailCount= 4
2018-03-10T20:56:07.148Z,1520715367.148 [BPC1](ERROR): Communications Fault
2018-03-10T20:56:07.228Z,1520715367.228 [CBIT](ERROR): Communications Fault in component: BPC1
2018-03-10T20:56:08.374Z,1520715368.374 [CBIT](INFO): Clearing failed state for component BPC1
2018-03-10T20:56:08.374Z,1520715368.374 [BPC1] No Fault, FailCount= 4
2018-03-10T20:56:14.726Z,1520715374.726 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T20:56:15.118Z,1520715375.118 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T20:56:15.519Z,1520715375.519 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T20:57:03.038Z,1520715423.038 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T20:57:03.038Z,1520715423.038 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 2
2018-03-10T20:57:03.038Z,1520715423.038 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-10T20:57:03.107Z,1520715423.107 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-10T20:57:03.458Z,1520715423.458 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-10T20:57:03.458Z,1520715423.458 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 2
2018-03-10T20:57:03.813Z,1520715423.813 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-10T20:57:03.814Z,1520715423.814 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-10T20:57:03.814Z,1520715423.814 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-10T20:57:41.833Z,1520715461.833 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-03-10T20:57:41.833Z,1520715461.833 [Default:CheckIn:C.Wait] Stopped
2018-03-10T20:57:41.833Z,1520715461.833 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-03-10T20:57:41.833Z,1520715461.833 [Default:CheckIn:D] Running Loop=1
2018-03-10T20:57:42.264Z,1520715462.264 [Default:CheckIn:D] Stopped
2018-03-10T20:57:42.264Z,1520715462.264 [Default:CheckIn:E] Running Loop=1
2018-03-10T20:57:42.665Z,1520715462.665 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 938.405729 min 
2018-03-10T20:57:42.665Z,1520715462.665 [Default:CheckIn:E] Stopped
2018-03-10T20:57:42.665Z,1520715462.665 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-03-10T20:57:42.665Z,1520715462.665 [Default:CheckIn] Stopped
2018-03-10T20:57:42.665Z,1520715462.665 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-03-10T20:57:42.666Z,1520715462.666 [Default:CheckIn](INFO): Running loop #93
2018-03-10T20:57:42.666Z,1520715462.666 [Default:CheckIn] Running Loop=93
2018-03-10T20:57:42.666Z,1520715462.666 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-03-10T20:57:42.666Z,1520715462.666 [Default:CheckIn:Read_GPS] Running Loop=1
2018-03-10T20:57:43.412Z,1520715463.412 [NAL9602](INFO): Powering up
2018-03-10T20:57:54.328Z,1520715474.328 [NAL9602](INFO): NAL9602 initialized
2018-03-10T21:00:03.902Z,1520715603.902 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T21:00:03.902Z,1520715603.902 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 3
2018-03-10T21:00:03.902Z,1520715603.902 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-10T21:00:03.927Z,1520715603.927 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-10T21:00:04.332Z,1520715604.332 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-10T21:00:04.333Z,1520715604.333 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 3
2018-03-10T21:00:04.695Z,1520715604.695 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-10T21:00:04.696Z,1520715604.696 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-10T21:00:04.696Z,1520715604.696 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-10T21:00:49.138Z,1520715649.138 [NAL9602](INFO): SBD MO Status=0, MOMSN=5845, MT Status=0, MTMSN=0
2018-03-10T21:00:49.138Z,1520715649.138 [NAL9602](INFO): No messages in MT queue
2018-03-10T21:00:50.144Z,1520715650.144 [NAL9602](INFO): GPS fix at 20180310T210048: (21.311598, -157.874576)
2018-03-10T21:00:50.234Z,1520715650.234 [Default:CheckIn:Read_GPS] Stopped
2018-03-10T21:00:50.234Z,1520715650.234 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-03-10T21:00:57.579Z,1520715657.579 [DataOverHttps](INFO): Sending 61 bytes from file Logs/20180310T051512/Courier0372.lzma
2018-03-10T21:00:58.378Z,1520715658.378 [DataOverHttps](INFO): Moved sent file to Logs/20180310T051512/Courier0372.lzma.bak
2018-03-10T21:00:58.379Z,1520715658.379 [DataOverHttps](INFO): SBD MOMSN=8008317
2018-03-10T21:01:18.536Z,1520715678.536 [DataOverHttps](INFO): Sending 158 bytes from file Logs/20180310T051512/Express0373.lzma
2018-03-10T21:01:19.584Z,1520715679.584 [DataOverHttps](INFO): Moved sent file to Logs/20180310T051512/Express0373.lzma.bak
2018-03-10T21:01:19.584Z,1520715679.584 [DataOverHttps](INFO): SBD MOMSN=8008320
2018-03-10T21:01:20.375Z,1520715680.375 [Default:CheckIn:Read_Iridium] Stopped
2018-03-10T21:01:20.375Z,1520715680.375 [Default:CheckIn:C.Wait] Running Loop=1
2018-03-10T21:01:20.375Z,1520715680.375 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-03-10T21:01:25.818Z,1520715685.818 [NAL9602](INFO): Powering down
2018-03-10T21:03:04.853Z,1520715784.853 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T21:03:04.853Z,1520715784.853 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 1
2018-03-10T21:03:04.853Z,1520715784.853 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-10T21:03:04.905Z,1520715784.905 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-10T21:03:05.267Z,1520715785.267 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-10T21:03:05.267Z,1520715785.267 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 1
2018-03-10T21:03:05.617Z,1520715785.617 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-10T21:03:05.617Z,1520715785.617 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-10T21:03:05.618Z,1520715785.618 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-10T21:04:09.518Z,1520715849.518 [BPC1](ERROR): Failed to receive battery data
2018-03-10T21:04:09.518Z,1520715849.518 [BPC1] Communications Fault, FailCount= 1
2018-03-10T21:04:09.518Z,1520715849.518 [BPC1](ERROR): Communications Fault
2018-03-10T21:04:09.565Z,1520715849.565 [CBIT](ERROR): Communications Fault in component: BPC1
2018-03-10T21:04:10.767Z,1520715850.767 [CBIT](INFO): Clearing failed state for component BPC1
2018-03-10T21:04:10.783Z,1520715850.783 [BPC1] No Fault, FailCount= 1
2018-03-10T21:04:41.322Z,1520715881.322 [BPC1](FAULT): Failed to initialize
2018-03-10T21:04:41.322Z,1520715881.322 [BPC1] Communications Fault, FailCount= 2
2018-03-10T21:04:41.322Z,1520715881.322 [BPC1](ERROR): Communications Fault
2018-03-10T21:04:41.448Z,1520715881.448 [CBIT](ERROR): Communications Fault in component: BPC1
2018-03-10T21:04:42.620Z,1520715882.620 [CBIT](INFO): Clearing failed state for component BPC1
2018-03-10T21:04:42.620Z,1520715882.620 [BPC1] No Fault, FailCount= 2
2018-03-10T21:05:13.350Z,1520715913.350 [BPC1](FAULT): Failed to initialize
2018-03-10T21:05:13.350Z,1520715913.350 [BPC1] Communications Fault, FailCount= 3
2018-03-10T21:05:13.350Z,1520715913.350 [BPC1](ERROR): Communications Fault
2018-03-10T21:05:13.530Z,1520715913.530 [CBIT](ERROR): Communications Fault in component: BPC1
2018-03-10T21:05:14.669Z,1520715914.669 [CBIT](INFO): Clearing failed state for component BPC1
2018-03-10T21:05:14.669Z,1520715914.669 [BPC1] No Fault, FailCount= 3
2018-03-10T21:05:45.103Z,1520715945.103 [BPC1](FAULT): Failed to initialize
2018-03-10T21:05:45.103Z,1520715945.103 [BPC1] Communications Fault, FailCount= 4
2018-03-10T21:05:45.104Z,1520715945.104 [BPC1](ERROR): Communications Fault
2018-03-10T21:05:45.198Z,1520715945.198 [CBIT](ERROR): Communications Fault in component: BPC1
2018-03-10T21:05:46.375Z,1520715946.375 [CBIT](INFO): Clearing failed state for component BPC1
2018-03-10T21:05:46.375Z,1520715946.375 [BPC1] No Fault, FailCount= 4
2018-03-10T21:05:49.977Z,1520715949.977 [CBIT](DEBUG): EFC running - data check-sum false
2018-03-10T21:06:05.925Z,1520715965.925 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T21:06:05.925Z,1520715965.925 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 2
2018-03-10T21:06:05.925Z,1520715965.925 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-10T21:06:05.949Z,1520715965.949 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-10T21:06:06.368Z,1520715966.368 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-10T21:06:06.368Z,1520715966.368 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 2
2018-03-10T21:06:06.724Z,1520715966.724 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-10T21:06:06.725Z,1520715966.725 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-10T21:06:06.725Z,1520715966.725 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-10T21:06:20.741Z,1520715980.741 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-03-10T21:06:20.742Z,1520715980.742 [Default:CheckIn:C.Wait] Stopped
2018-03-10T21:06:20.742Z,1520715980.742 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-03-10T21:06:20.742Z,1520715980.742 [Default:CheckIn:D] Running Loop=1
2018-03-10T21:06:21.144Z,1520715981.144 [Default:CheckIn:D] Stopped
2018-03-10T21:06:21.144Z,1520715981.144 [Default:CheckIn:E] Running Loop=1
2018-03-10T21:06:21.526Z,1520715981.526 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 947.053711 min 
2018-03-10T21:06:21.527Z,1520715981.527 [Default:CheckIn:E] Stopped
2018-03-10T21:06:21.543Z,1520715981.543 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-03-10T21:06:21.543Z,1520715981.543 [Default:CheckIn] Stopped
2018-03-10T21:06:21.543Z,1520715981.543 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-03-10T21:06:21.543Z,1520715981.543 [Default:CheckIn](INFO): Running loop #94
2018-03-10T21:06:21.544Z,1520715981.544 [Default:CheckIn] Running Loop=94
2018-03-10T21:06:21.544Z,1520715981.544 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-03-10T21:06:21.544Z,1520715981.544 [Default:CheckIn:Read_GPS] Running Loop=1
2018-03-10T21:06:26.894Z,1520715986.894 [NAL9602](INFO): Powering up
2018-03-10T21:06:37.820Z,1520715997.820 [NAL9602](INFO): NAL9602 initialized
2018-03-10T21:09:07.017Z,1520716147.017 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T21:09:07.017Z,1520716147.017 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 3
2018-03-10T21:09:07.017Z,1520716147.017 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-10T21:09:07.070Z,1520716147.070 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-10T21:09:07.430Z,1520716147.430 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-10T21:09:07.430Z,1520716147.430 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 3
2018-03-10T21:09:07.815Z,1520716147.815 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-10T21:09:07.816Z,1520716147.816 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-10T21:09:07.816Z,1520716147.816 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-10T21:09:43.606Z,1520716183.606 [NAL9602](INFO): SBD MO Status=2, MOMSN=5846, MT Status=2, MTMSN=0
2018-03-10T21:09:43.606Z,1520716183.606 [NAL9602](ERROR): Failed to initiate SBD session. Error code: 2
2018-03-10T21:11:05.250Z,1520716265.250 [NAL9602](INFO): SBD MO Status=2, MOMSN=5846, MT Status=2, MTMSN=0
2018-03-10T21:11:05.250Z,1520716265.250 [NAL9602](ERROR): Failed to initiate SBD session. Error code: 2
2018-03-10T21:11:21.703Z,1520716281.703 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-03-10T21:06:21.5Z
2018-03-10T21:11:21.703Z,1520716281.703 [Default:CheckIn:Read_GPS] Stopped
2018-03-10T21:11:21.703Z,1520716281.703 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-03-10T21:11:28.536Z,1520716288.536 [NAL9602](INFO): SBD MO Status=0, MOMSN=5846, MT Status=0, MTMSN=0
2018-03-10T21:11:28.536Z,1520716288.536 [NAL9602](INFO): No messages in MT queue
2018-03-10T21:11:29.103Z,1520716289.103 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20180310T051512/Courier0376.lzma
2018-03-10T21:11:29.903Z,1520716289.903 [DataOverHttps](INFO): Moved sent file to Logs/20180310T051512/Courier0376.lzma.bak
2018-03-10T21:11:29.904Z,1520716289.904 [DataOverHttps](INFO): SBD MOMSN=8008394
2018-03-10T21:11:44.404Z,1520716304.404 [DataOverHttps](INFO): Sending 155 bytes from file Logs/20180310T051512/Express0377.lzma
2018-03-10T21:11:45.202Z,1520716305.202 [DataOverHttps](INFO): Moved sent file to Logs/20180310T051512/Express0377.lzma.bak
2018-03-10T21:11:45.202Z,1520716305.202 [DataOverHttps](INFO): SBD MOMSN=8008396
2018-03-10T21:11:46.128Z,1520716306.128 [Default:CheckIn:Read_Iridium] Stopped
2018-03-10T21:11:46.128Z,1520716306.128 [Default:CheckIn:C.Wait] Running Loop=1
2018-03-10T21:11:46.128Z,1520716306.128 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-03-10T21:11:58.924Z,1520716318.924 [NAL9602](INFO): Powering down
2018-03-10T21:12:08.173Z,1520716328.173 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T21:12:08.173Z,1520716328.173 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 4
2018-03-10T21:12:08.173Z,1520716328.173 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-10T21:12:08.202Z,1520716328.202 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-10T21:12:08.732Z,1520716328.732 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-10T21:12:08.733Z,1520716328.733 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 4
2018-03-10T21:12:09.012Z,1520716329.012 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-10T21:12:09.013Z,1520716329.013 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-10T21:12:09.013Z,1520716329.013 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-10T21:13:51.559Z,1520716431.559 [BPC1](ERROR): Failed to receive battery data
2018-03-10T21:13:51.559Z,1520716431.559 [BPC1] Communications Fault, FailCount= 1
2018-03-10T21:13:51.559Z,1520716431.559 [BPC1](ERROR): Communications Fault
2018-03-10T21:13:51.656Z,1520716431.656 [CBIT](ERROR): Communications Fault in component: BPC1
2018-03-10T21:13:52.546Z,1520716432.546 [CBIT](INFO): Clearing failed state for component BPC1
2018-03-10T21:13:52.546Z,1520716432.546 [BPC1] No Fault, FailCount= 1
2018-03-10T21:14:23.311Z,1520716463.311 [BPC1](FAULT): Failed to initialize
2018-03-10T21:14:23.311Z,1520716463.311 [BPC1] Communications Fault, FailCount= 2
2018-03-10T21:14:23.311Z,1520716463.311 [BPC1](ERROR): Communications Fault
2018-03-10T21:14:23.401Z,1520716463.401 [CBIT](ERROR): Communications Fault in component: BPC1
2018-03-10T21:14:24.578Z,1520716464.578 [CBIT](INFO): Clearing failed state for component BPC1
2018-03-10T21:14:24.578Z,1520716464.578 [BPC1] No Fault, FailCount= 2
2018-03-10T21:14:55.273Z,1520716495.273 [BPC1](FAULT): Failed to initialize
2018-03-10T21:14:55.273Z,1520716495.273 [BPC1] Communications Fault, FailCount= 3
2018-03-10T21:14:55.273Z,1520716495.273 [BPC1](ERROR): Communications Fault
2018-03-10T21:14:55.337Z,1520716495.337 [CBIT](ERROR): Communications Fault in component: BPC1
2018-03-10T21:14:56.526Z,1520716496.526 [CBIT](INFO): Clearing failed state for component BPC1
2018-03-10T21:14:56.526Z,1520716496.526 [BPC1] No Fault, FailCount= 3
2018-03-10T21:15:09.309Z,1520716509.309 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T21:15:09.309Z,1520716509.309 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 5
2018-03-10T21:15:09.309Z,1520716509.309 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-10T21:15:09.342Z,1520716509.342 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-10T21:15:09.719Z,1520716509.719 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-10T21:15:09.719Z,1520716509.719 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 5
2018-03-10T21:15:10.111Z,1520716510.111 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-10T21:15:10.112Z,1520716510.112 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-10T21:15:10.112Z,1520716510.112 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-10T21:15:27.268Z,1520716527.268 [BPC1](FAULT): Failed to initialize
2018-03-10T21:15:27.268Z,1520716527.268 [BPC1] Communications Fault, FailCount= 4
2018-03-10T21:15:27.268Z,1520716527.268 [BPC1](ERROR): Communications Fault
2018-03-10T21:15:27.412Z,1520716527.412 [CBIT](ERROR): Communications Fault in component: BPC1
2018-03-10T21:15:28.499Z,1520716528.499 [CBIT](INFO): Clearing failed state for component BPC1
2018-03-10T21:15:28.499Z,1520716528.499 [BPC1] No Fault, FailCount= 4
2018-03-10T21:15:52.079Z,1520716552.079 [CBIT](DEBUG): EFC running - data check-sum false
2018-03-10T21:16:46.614Z,1520716606.614 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-03-10T21:16:46.615Z,1520716606.615 [Default:CheckIn:C.Wait] Stopped
2018-03-10T21:16:46.615Z,1520716606.615 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-03-10T21:16:46.632Z,1520716606.632 [Default:CheckIn:D] Running Loop=1
2018-03-10T21:16:47.005Z,1520716607.005 [Default:CheckIn:D] Stopped
2018-03-10T21:16:47.005Z,1520716607.005 [Default:CheckIn:E] Running Loop=1
2018-03-10T21:16:47.335Z,1520716607.335 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 957.484766 min 
2018-03-10T21:16:47.375Z,1520716607.375 [Default:CheckIn:E] Stopped
2018-03-10T21:16:47.375Z,1520716607.375 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-03-10T21:16:47.375Z,1520716607.375 [Default:CheckIn] Stopped
2018-03-10T21:16:47.375Z,1520716607.375 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-03-10T21:16:47.376Z,1520716607.376 [Default:CheckIn](INFO): Running loop #95
2018-03-10T21:16:47.376Z,1520716607.376 [Default:CheckIn] Running Loop=95
2018-03-10T21:16:47.376Z,1520716607.376 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-03-10T21:16:47.376Z,1520716607.376 [Default:CheckIn:Read_GPS] Running Loop=1
2018-03-10T21:16:52.375Z,1520716612.375 [NAL9602](INFO): Powering up
2018-03-10T21:17:03.569Z,1520716623.569 [NAL9602](INFO): NAL9602 initialized
2018-03-10T21:17:04.365Z,1520716624.365 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-03-10T21:17:04.365Z,1520716624.365 [NAL9602] Data Fault, FailCount= 1
2018-03-10T21:17:04.365Z,1520716624.365 [NAL9602](ERROR): Data Fault
2018-03-10T21:17:04.424Z,1520716624.424 [CBIT](ERROR): Data Fault in component: NAL9602
2018-03-10T21:17:04.762Z,1520716624.762 [NAL9602](INFO): Powering down
2018-03-10T21:17:05.665Z,1520716625.665 [CBIT](INFO): Clearing failed state for component NAL9602
2018-03-10T21:17:05.665Z,1520716625.665 [NAL9602] No Fault, FailCount= 1
2018-03-10T21:17:34.764Z,1520716654.764 [NAL9602](INFO): Powering up NAL9602
2018-03-10T21:17:45.964Z,1520716665.964 [NAL9602](INFO): NAL9602 initialized
2018-03-10T21:18:10.358Z,1520716690.358 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T21:18:10.358Z,1520716690.358 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 6
2018-03-10T21:18:10.358Z,1520716690.358 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-10T21:18:10.395Z,1520716690.395 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-10T21:18:10.804Z,1520716690.804 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-10T21:18:10.804Z,1520716690.804 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 6
2018-03-10T21:18:11.162Z,1520716691.162 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-10T21:18:11.162Z,1520716691.162 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-10T21:18:11.162Z,1520716691.162 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-10T21:18:46.706Z,1520716726.706 [NAL9602](INFO): SBD MO Status=0, MOMSN=5847, MT Status=0, MTMSN=0
2018-03-10T21:18:46.706Z,1520716726.706 [NAL9602](INFO): No messages in MT queue
2018-03-10T21:21:02.880Z,1520716862.880 [NAL9602](INFO): GPS fix at 20180310T212101: (21.311515, -157.874137)
2018-03-10T21:21:02.997Z,1520716862.997 [Default:CheckIn:Read_GPS] Stopped
2018-03-10T21:21:02.997Z,1520716862.997 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-03-10T21:21:10.316Z,1520716870.316 [DataOverHttps](INFO): Sending 62 bytes from file Logs/20180310T051512/Courier0380.lzma
2018-03-10T21:21:11.106Z,1520716871.106 [DataOverHttps](INFO): Moved sent file to Logs/20180310T051512/Courier0380.lzma.bak
2018-03-10T21:21:11.106Z,1520716871.106 [DataOverHttps](INFO): SBD MOMSN=8008470
2018-03-10T21:21:11.198Z,1520716871.198 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T21:21:11.198Z,1520716871.198 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 1
2018-03-10T21:21:11.198Z,1520716871.198 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-10T21:21:11.219Z,1520716871.219 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-10T21:21:12.125Z,1520716872.125 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-10T21:21:12.125Z,1520716872.125 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 1
2018-03-10T21:21:12.252Z,1520716872.252 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-10T21:21:12.253Z,1520716872.253 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-10T21:21:12.253Z,1520716872.253 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-10T21:21:23.856Z,1520716883.856 [DataOverHttps](INFO): Sending 205 bytes from file Logs/20180310T051512/Express0381.lzma
2018-03-10T21:21:24.642Z,1520716884.642 [DataOverHttps](INFO): Moved sent file to Logs/20180310T051512/Express0381.lzma.bak
2018-03-10T21:21:24.642Z,1520716884.642 [DataOverHttps](INFO): SBD MOMSN=8008473
2018-03-10T21:21:25.672Z,1520716885.672 [Default:CheckIn:Read_Iridium] Stopped
2018-03-10T21:21:25.672Z,1520716885.672 [Default:CheckIn:C.Wait] Running Loop=1
2018-03-10T21:21:25.672Z,1520716885.672 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-03-10T21:21:34.873Z,1520716894.873 [NAL9602](INFO): Powering down
2018-03-10T21:23:21.556Z,1520717001.556 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:23:21.564Z,1520717001.564 [BPC1](ERROR): Failed to receive battery data
2018-03-10T21:23:21.564Z,1520717001.564 [BPC1] Communications Fault, FailCount= 1
2018-03-10T21:23:21.564Z,1520717001.564 [BPC1](ERROR): Communications Fault
2018-03-10T21:23:21.655Z,1520717001.655 [CBIT](ERROR): Communications Fault in component: BPC1
2018-03-10T21:23:21.955Z,1520717001.955 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:23:22.360Z,1520717002.360 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:23:22.754Z,1520717002.754 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:23:22.818Z,1520717002.818 [CBIT](INFO): Clearing failed state for component BPC1
2018-03-10T21:23:22.818Z,1520717002.818 [BPC1] No Fault, FailCount= 1
2018-03-10T21:23:23.163Z,1520717003.163 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:23:23.563Z,1520717003.563 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:23:23.964Z,1520717003.964 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:23:24.369Z,1520717004.369 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:23:24.774Z,1520717004.774 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:23:53.370Z,1520717033.370 [BPC1](FAULT): Failed to initialize
2018-03-10T21:23:53.370Z,1520717033.370 [BPC1] Communications Fault, FailCount= 2
2018-03-10T21:23:53.370Z,1520717033.370 [BPC1](ERROR): Communications Fault
2018-03-10T21:23:53.485Z,1520717033.485 [CBIT](ERROR): Communications Fault in component: BPC1
2018-03-10T21:23:54.686Z,1520717034.686 [CBIT](INFO): Clearing failed state for component BPC1
2018-03-10T21:23:54.686Z,1520717034.686 [BPC1] No Fault, FailCount= 2
2018-03-10T21:24:12.635Z,1520717052.635 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T21:24:12.635Z,1520717052.635 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 2
2018-03-10T21:24:12.635Z,1520717052.635 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-10T21:24:12.708Z,1520717052.708 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-10T21:24:13.092Z,1520717053.092 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-10T21:24:13.092Z,1520717053.092 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 2
2018-03-10T21:24:13.398Z,1520717053.398 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-10T21:24:13.398Z,1520717053.398 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-10T21:24:13.399Z,1520717053.399 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-10T21:24:25.412Z,1520717065.412 [BPC1](FAULT): Failed to initialize
2018-03-10T21:24:25.412Z,1520717065.412 [BPC1] Communications Fault, FailCount= 3
2018-03-10T21:24:25.412Z,1520717065.412 [BPC1](ERROR): Communications Fault
2018-03-10T21:24:25.511Z,1520717065.511 [CBIT](ERROR): Communications Fault in component: BPC1
2018-03-10T21:24:26.665Z,1520717066.665 [CBIT](INFO): Clearing failed state for component BPC1
2018-03-10T21:24:26.665Z,1520717066.665 [BPC1] No Fault, FailCount= 3
2018-03-10T21:25:01.639Z,1520717101.639 [BPC1](FAULT): Failed to initialize
2018-03-10T21:25:01.639Z,1520717101.639 [BPC1] Communications Fault, FailCount= 4
2018-03-10T21:25:01.639Z,1520717101.639 [BPC1](ERROR): Communications Fault
2018-03-10T21:25:01.776Z,1520717101.776 [CBIT](ERROR): Communications Fault in component: BPC1
2018-03-10T21:25:02.873Z,1520717102.873 [CBIT](INFO): Clearing failed state for component BPC1
2018-03-10T21:25:02.873Z,1520717102.873 [BPC1] No Fault, FailCount= 4
2018-03-10T21:25:52.285Z,1520717152.285 [CBIT](DEBUG): EFC running - data check-sum false
2018-03-10T21:26:12.231Z,1520717172.231 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:26:12.636Z,1520717172.636 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:26:13.030Z,1520717173.030 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:26:13.430Z,1520717173.430 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:26:13.830Z,1520717173.830 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:26:14.222Z,1520717174.222 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:26:14.653Z,1520717174.653 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:26:15.048Z,1520717175.048 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:26:15.428Z,1520717175.428 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:26:15.822Z,1520717175.822 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:26:16.234Z,1520717176.234 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:26:16.653Z,1520717176.653 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:26:17.022Z,1520717177.022 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:26:17.424Z,1520717177.424 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:26:17.828Z,1520717177.828 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:26:18.223Z,1520717178.223 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:26:18.627Z,1520717178.627 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:26:19.036Z,1520717179.036 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:26:19.436Z,1520717179.436 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:26:19.837Z,1520717179.837 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:26:20.228Z,1520717180.228 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:26:26.287Z,1520717186.287 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-03-10T21:26:26.287Z,1520717186.287 [Default:CheckIn:C.Wait] Stopped
2018-03-10T21:26:26.287Z,1520717186.287 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-03-10T21:26:26.287Z,1520717186.287 [Default:CheckIn:D] Running Loop=1
2018-03-10T21:26:26.658Z,1520717186.658 [Default:CheckIn:D] Stopped
2018-03-10T21:26:26.658Z,1520717186.658 [Default:CheckIn:E] Running Loop=1
2018-03-10T21:26:27.075Z,1520717187.075 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 967.145638 min 
2018-03-10T21:26:27.075Z,1520717187.075 [Default:CheckIn:E] Stopped
2018-03-10T21:26:27.076Z,1520717187.076 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-03-10T21:26:27.076Z,1520717187.076 [Default:CheckIn] Stopped
2018-03-10T21:26:27.076Z,1520717187.076 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-03-10T21:26:27.076Z,1520717187.076 [Default:CheckIn](INFO): Running loop #96
2018-03-10T21:26:27.076Z,1520717187.076 [Default:CheckIn] Running Loop=96
2018-03-10T21:26:27.076Z,1520717187.076 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-03-10T21:26:27.076Z,1520717187.076 [Default:CheckIn:Read_GPS] Running Loop=1
2018-03-10T21:26:33.470Z,1520717193.470 [NAL9602](INFO): Powering up
2018-03-10T21:26:44.634Z,1520717204.634 [NAL9602](INFO): NAL9602 initialized
2018-03-10T21:27:13.560Z,1520717233.560 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T21:27:13.560Z,1520717233.560 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 3
2018-03-10T21:27:13.560Z,1520717233.560 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-10T21:27:13.649Z,1520717233.649 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-10T21:27:13.906Z,1520717233.906 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-10T21:27:13.906Z,1520717233.906 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 3
2018-03-10T21:27:14.299Z,1520717234.299 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-10T21:27:14.300Z,1520717234.300 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-10T21:27:14.300Z,1520717234.300 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-10T21:28:37.842Z,1520717317.842 [NAL9602](INFO): SBD MO Status=0, MOMSN=5848, MT Status=0, MTMSN=0
2018-03-10T21:28:37.842Z,1520717317.842 [NAL9602](INFO): No messages in MT queue
2018-03-10T21:29:18.670Z,1520717358.670 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:29:19.058Z,1520717359.058 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:29:19.485Z,1520717359.485 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:29:19.896Z,1520717359.896 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:29:20.264Z,1520717360.264 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:29:20.660Z,1520717360.660 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:29:21.054Z,1520717361.054 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:29:21.460Z,1520717361.460 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:29:21.855Z,1520717361.855 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:29:22.274Z,1520717362.274 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:29:22.677Z,1520717362.677 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:29:23.066Z,1520717363.066 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:29:23.474Z,1520717363.474 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:29:23.855Z,1520717363.855 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:29:24.285Z,1520717364.285 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:29:24.674Z,1520717364.674 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:29:25.064Z,1520717365.064 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:29:25.478Z,1520717365.478 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:29:25.891Z,1520717365.891 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:29:26.276Z,1520717366.276 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:29:26.663Z,1520717366.663 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:29:27.068Z,1520717367.068 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:29:27.460Z,1520717367.460 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:29:32.447Z,1520717372.447 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:29:32.688Z,1520717372.688 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:29:33.085Z,1520717373.085 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:29:33.486Z,1520717373.486 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:29:33.868Z,1520717373.868 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:29:34.264Z,1520717374.264 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:29:34.661Z,1520717374.661 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:29:35.065Z,1520717375.065 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:29:35.481Z,1520717375.481 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:29:35.882Z,1520717375.882 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:29:36.282Z,1520717376.282 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:29:36.663Z,1520717376.663 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:29:37.070Z,1520717377.070 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:29:37.469Z,1520717377.469 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:29:37.889Z,1520717377.889 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:29:38.280Z,1520717378.280 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:29:38.683Z,1520717378.683 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:29:39.081Z,1520717379.081 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:29:39.458Z,1520717379.458 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:29:39.859Z,1520717379.859 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:29:40.264Z,1520717380.264 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:29:40.678Z,1520717380.678 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:29:41.068Z,1520717381.068 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:29:41.477Z,1520717381.477 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:29:41.881Z,1520717381.881 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:29:42.279Z,1520717382.279 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:29:42.661Z,1520717382.661 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:29:43.073Z,1520717383.073 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:29:43.476Z,1520717383.476 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:29:43.872Z,1520717383.872 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:29:44.300Z,1520717384.300 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:29:44.682Z,1520717384.682 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:29:45.078Z,1520717385.078 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:29:45.472Z,1520717385.472 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:29:45.863Z,1520717385.863 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:29:46.272Z,1520717386.272 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:29:46.689Z,1520717386.689 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:29:47.059Z,1520717387.059 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:29:47.474Z,1520717387.474 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:29:47.878Z,1520717387.878 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:29:48.264Z,1520717388.264 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:29:48.671Z,1520717388.671 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:29:49.068Z,1520717389.068 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:29:49.478Z,1520717389.478 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:29:49.866Z,1520717389.866 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:29:50.287Z,1520717390.287 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:29:50.691Z,1520717390.691 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:29:51.070Z,1520717391.070 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:29:51.468Z,1520717391.468 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:29:51.851Z,1520717391.851 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:29:52.273Z,1520717392.273 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:29:52.683Z,1520717392.683 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:29:53.059Z,1520717393.059 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:29:53.477Z,1520717393.477 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:29:53.892Z,1520717393.892 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:29:54.270Z,1520717394.270 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:29:54.664Z,1520717394.664 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:29:55.078Z,1520717395.078 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:29:55.478Z,1520717395.478 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:29:55.892Z,1520717395.892 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:29:56.271Z,1520717396.271 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:29:56.678Z,1520717396.678 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:29:57.081Z,1520717397.081 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:29:57.478Z,1520717397.478 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:29:57.885Z,1520717397.885 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:29:58.259Z,1520717398.259 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:29:58.678Z,1520717398.678 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:29:59.063Z,1520717399.063 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:29:59.478Z,1520717399.478 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:29:59.878Z,1520717399.878 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:30:00.270Z,1520717400.270 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:30:00.673Z,1520717400.673 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:30:01.073Z,1520717401.073 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:30:01.455Z,1520717401.455 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:30:01.861Z,1520717401.861 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:30:02.278Z,1520717402.278 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:30:02.645Z,1520717402.645 [NAL9602](INFO): GPS fix at 20180310T213001: (21.310815, -157.874319)
2018-03-10T21:30:02.665Z,1520717402.665 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:30:02.723Z,1520717402.723 [Default:CheckIn:Read_GPS] Stopped
2018-03-10T21:30:02.723Z,1520717402.723 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-03-10T21:30:03.090Z,1520717403.090 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:30:03.998Z,1520717403.998 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:30:04.198Z,1520717404.198 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:30:04.540Z,1520717404.540 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:30:09.539Z,1520717409.539 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:30:09.695Z,1520717409.695 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:30:10.063Z,1520717410.063 [DataOverHttps](INFO): Sending 63 bytes from file Logs/20180310T051512/Courier0384.lzma
2018-03-10T21:30:10.112Z,1520717410.112 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:30:10.479Z,1520717410.479 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:30:10.856Z,1520717410.856 [DataOverHttps](INFO): Moved sent file to Logs/20180310T051512/Courier0384.lzma.bak
2018-03-10T21:30:10.856Z,1520717410.856 [DataOverHttps](INFO): SBD MOMSN=8008537
2018-03-10T21:30:10.878Z,1520717410.878 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:30:11.900Z,1520717411.900 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:30:12.058Z,1520717412.058 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:30:16.923Z,1520717416.923 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:30:16.968Z,1520717416.968 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T21:30:16.968Z,1520717416.968 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 1
2018-03-10T21:30:16.968Z,1520717416.968 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-10T21:30:17.041Z,1520717417.041 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-10T21:30:17.119Z,1520717417.119 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:30:17.212Z,1520717417.212 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-10T21:30:17.212Z,1520717417.212 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 1
2018-03-10T21:30:17.487Z,1520717417.487 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:30:17.525Z,1520717417.525 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-10T21:30:17.525Z,1520717417.525 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-10T21:30:17.526Z,1520717417.526 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-10T21:30:17.874Z,1520717417.874 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:30:18.292Z,1520717418.292 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:30:18.702Z,1520717418.702 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:30:19.087Z,1520717419.087 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:30:24.159Z,1520717424.159 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:30:24.347Z,1520717424.347 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:30:24.712Z,1520717424.712 [DataOverHttps](INFO): Sending 167 bytes from file Logs/20180310T051512/Express0385.lzma
2018-03-10T21:30:24.764Z,1520717424.764 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:30:25.130Z,1520717425.130 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:30:25.514Z,1520717425.514 [DataOverHttps](INFO): Moved sent file to Logs/20180310T051512/Express0385.lzma.bak
2018-03-10T21:30:25.514Z,1520717425.514 [DataOverHttps](INFO): SBD MOMSN=8008542
2018-03-10T21:30:25.546Z,1520717425.546 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:30:26.429Z,1520717426.429 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:30:26.460Z,1520717426.460 [Default:CheckIn:Read_Iridium] Stopped
2018-03-10T21:30:26.460Z,1520717426.460 [Default:CheckIn:C.Wait] Running Loop=1
2018-03-10T21:30:26.460Z,1520717426.460 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-03-10T21:30:26.605Z,1520717426.605 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:30:31.535Z,1520717431.535 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:30:31.689Z,1520717431.689 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:30:32.098Z,1520717432.098 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:30:32.480Z,1520717432.480 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:30:32.887Z,1520717432.887 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:30:33.295Z,1520717433.295 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:30:33.687Z,1520717433.687 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:30:34.087Z,1520717434.087 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:30:34.492Z,1520717434.492 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:30:34.888Z,1520717434.888 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:30:35.278Z,1520717435.278 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:30:35.678Z,1520717435.678 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:30:36.083Z,1520717436.083 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:30:36.476Z,1520717436.476 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:30:36.896Z,1520717436.896 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:30:37.278Z,1520717437.278 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:30:37.677Z,1520717437.677 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:30:38.085Z,1520717438.085 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:30:38.495Z,1520717438.495 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:30:38.878Z,1520717438.878 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:30:39.289Z,1520717439.289 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:30:39.660Z,1520717439.660 [NAL9602](INFO): Powering down
2018-03-10T21:30:39.717Z,1520717439.717 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:30:40.072Z,1520717440.072 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:30:40.478Z,1520717440.478 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:30:40.879Z,1520717440.879 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:30:41.278Z,1520717441.278 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:30:41.682Z,1520717441.682 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:30:42.121Z,1520717442.121 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:30:42.480Z,1520717442.480 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:30:42.878Z,1520717442.878 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:30:43.278Z,1520717443.278 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:30:43.676Z,1520717443.676 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:30:44.084Z,1520717444.084 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:30:44.479Z,1520717444.479 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:30:44.879Z,1520717444.879 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:30:45.279Z,1520717445.279 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:30:45.678Z,1520717445.678 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:30:46.079Z,1520717446.079 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:30:46.490Z,1520717446.490 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:30:46.884Z,1520717446.884 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:30:47.296Z,1520717447.296 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:30:47.678Z,1520717447.678 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:30:48.079Z,1520717448.079 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:30:48.484Z,1520717448.484 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:30:48.895Z,1520717448.895 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:30:49.283Z,1520717449.283 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:30:49.687Z,1520717449.687 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:30:50.089Z,1520717450.089 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:30:50.479Z,1520717450.479 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:30:50.887Z,1520717450.887 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:30:51.279Z,1520717451.279 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:30:51.680Z,1520717451.680 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:30:52.084Z,1520717452.084 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:30:52.504Z,1520717452.504 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:30:52.878Z,1520717452.878 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:30:53.278Z,1520717453.278 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:30:53.689Z,1520717453.689 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:30:54.086Z,1520717454.086 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:30:54.478Z,1520717454.478 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:30:54.879Z,1520717454.879 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:30:55.284Z,1520717455.284 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:30:55.692Z,1520717455.692 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:30:56.083Z,1520717456.083 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:30:56.479Z,1520717456.479 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:30:56.893Z,1520717456.893 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:30:57.287Z,1520717457.287 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:30:57.680Z,1520717457.680 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:30:58.087Z,1520717458.087 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:30:58.485Z,1520717458.485 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:30:58.880Z,1520717458.880 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:30:59.292Z,1520717459.292 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:30:59.698Z,1520717459.698 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:31:00.078Z,1520717460.078 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:31:00.478Z,1520717460.478 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:31:00.884Z,1520717460.884 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:31:01.291Z,1520717461.291 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:31:01.686Z,1520717461.686 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:31:02.090Z,1520717462.090 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:31:02.479Z,1520717462.479 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:31:02.878Z,1520717462.878 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:31:03.290Z,1520717463.290 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:31:03.686Z,1520717463.686 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:31:04.092Z,1520717464.092 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:31:04.478Z,1520717464.478 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:31:04.886Z,1520717464.886 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:31:05.284Z,1520717465.284 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:31:05.677Z,1520717465.677 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:31:06.078Z,1520717466.078 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:31:06.473Z,1520717466.473 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:31:06.880Z,1520717466.880 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:31:07.281Z,1520717467.281 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:31:07.680Z,1520717467.680 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:31:08.076Z,1520717468.076 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:31:08.474Z,1520717468.474 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:31:08.877Z,1520717468.877 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:31:09.277Z,1520717469.277 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:31:09.681Z,1520717469.681 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:31:10.098Z,1520717470.098 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:31:10.484Z,1520717470.484 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:31:10.878Z,1520717470.878 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:31:11.278Z,1520717471.278 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:31:11.682Z,1520717471.682 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:31:12.129Z,1520717472.129 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:31:12.479Z,1520717472.479 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:31:12.892Z,1520717472.892 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:31:13.282Z,1520717473.282 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:31:13.678Z,1520717473.678 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:31:14.079Z,1520717474.079 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:31:14.478Z,1520717474.478 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:31:14.879Z,1520717474.879 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:31:15.279Z,1520717475.279 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:31:15.684Z,1520717475.684 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:31:16.088Z,1520717476.088 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:31:16.486Z,1520717476.486 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:31:16.887Z,1520717476.887 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:31:17.284Z,1520717477.284 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:31:17.678Z,1520717477.678 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:31:18.079Z,1520717478.079 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:31:18.484Z,1520717478.484 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:31:18.878Z,1520717478.878 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:31:19.279Z,1520717479.279 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:31:19.692Z,1520717479.692 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:31:20.092Z,1520717480.092 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:31:20.487Z,1520717480.487 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:31:20.928Z,1520717480.928 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:31:21.280Z,1520717481.280 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:31:21.684Z,1520717481.684 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:31:22.091Z,1520717482.091 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:31:22.488Z,1520717482.488 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:31:22.893Z,1520717482.893 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:31:23.288Z,1520717483.288 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:31:23.696Z,1520717483.696 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:31:24.096Z,1520717484.096 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:31:24.518Z,1520717484.518 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:31:24.932Z,1520717484.932 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:31:25.313Z,1520717485.313 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:31:25.692Z,1520717485.692 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:31:26.079Z,1520717486.079 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:31:26.485Z,1520717486.485 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:31:26.879Z,1520717486.879 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:31:31.784Z,1520717491.784 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:31:31.916Z,1520717491.916 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:31:32.315Z,1520717492.315 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:31:32.710Z,1520717492.710 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:31:33.108Z,1520717493.108 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:31:33.502Z,1520717493.502 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:31:33.907Z,1520717493.907 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:31:34.311Z,1520717494.311 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:31:34.716Z,1520717494.716 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:31:35.110Z,1520717495.110 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:31:35.503Z,1520717495.503 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:31:35.908Z,1520717495.908 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:31:36.302Z,1520717496.302 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:31:36.704Z,1520717496.704 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:31:37.115Z,1520717497.115 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:31:37.521Z,1520717497.521 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:31:37.916Z,1520717497.916 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:31:38.303Z,1520717498.303 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:31:38.707Z,1520717498.707 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:31:39.119Z,1520717499.119 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:31:39.513Z,1520717499.513 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:31:39.920Z,1520717499.920 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:31:40.303Z,1520717500.303 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:31:40.703Z,1520717500.703 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:31:41.102Z,1520717501.102 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:31:41.504Z,1520717501.504 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:31:41.907Z,1520717501.907 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:31:42.313Z,1520717502.313 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:31:42.706Z,1520717502.706 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:31:43.102Z,1520717503.102 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:31:43.504Z,1520717503.504 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:31:43.903Z,1520717503.903 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:31:44.308Z,1520717504.308 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:31:44.707Z,1520717504.707 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:31:45.108Z,1520717505.108 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:31:45.510Z,1520717505.510 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:31:45.910Z,1520717505.910 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:31:46.318Z,1520717506.318 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:31:46.708Z,1520717506.708 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:31:47.107Z,1520717507.107 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:31:47.506Z,1520717507.506 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:31:47.910Z,1520717507.910 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:31:48.312Z,1520717508.312 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:31:48.710Z,1520717508.710 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:31:49.110Z,1520717509.110 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:31:49.502Z,1520717509.502 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:31:49.905Z,1520717509.905 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:31:50.303Z,1520717510.303 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:31:50.707Z,1520717510.707 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:31:51.110Z,1520717511.110 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:31:51.515Z,1520717511.515 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:31:51.909Z,1520717511.909 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:31:52.302Z,1520717512.302 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:31:52.705Z,1520717512.705 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:31:53.102Z,1520717513.102 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:31:53.515Z,1520717513.515 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:31:53.908Z,1520717513.908 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:31:54.302Z,1520717514.302 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:31:54.700Z,1520717514.700 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:31:55.103Z,1520717515.103 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:31:55.506Z,1520717515.506 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:31:55.912Z,1520717515.912 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:31:56.315Z,1520717516.315 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:31:56.710Z,1520717516.710 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:31:57.108Z,1520717517.108 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:31:57.512Z,1520717517.512 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:31:57.902Z,1520717517.902 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:31:58.302Z,1520717518.302 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:31:58.723Z,1520717518.723 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:31:59.111Z,1520717519.111 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:31:59.511Z,1520717519.511 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:31:59.923Z,1520717519.923 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:32:00.302Z,1520717520.302 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:32:00.703Z,1520717520.703 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:32:01.110Z,1520717521.110 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:32:01.514Z,1520717521.514 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:32:01.911Z,1520717521.911 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:32:02.316Z,1520717522.316 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:32:02.710Z,1520717522.710 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:32:03.115Z,1520717523.115 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:32:03.513Z,1520717523.513 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:32:03.902Z,1520717523.902 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:32:04.310Z,1520717524.310 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:32:04.712Z,1520717524.712 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:32:05.114Z,1520717525.114 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:32:05.510Z,1520717525.510 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:32:05.918Z,1520717525.918 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:32:06.311Z,1520717526.311 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:32:06.702Z,1520717526.702 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:32:07.108Z,1520717527.108 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:32:07.507Z,1520717527.507 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:32:07.910Z,1520717527.910 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:32:08.313Z,1520717528.313 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:32:08.710Z,1520717528.710 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:32:09.123Z,1520717529.123 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:32:09.512Z,1520717529.512 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:32:09.902Z,1520717529.902 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:32:10.296Z,1520717530.296 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:32:10.707Z,1520717530.707 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:32:11.109Z,1520717531.109 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:32:11.534Z,1520717531.534 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:32:11.923Z,1520717531.923 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:32:12.321Z,1520717532.321 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:32:12.712Z,1520717532.712 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:32:13.124Z,1520717533.124 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:32:13.502Z,1520717533.502 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:32:13.919Z,1520717533.919 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:32:14.307Z,1520717534.307 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:32:14.708Z,1520717534.708 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:32:15.104Z,1520717535.104 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:32:15.506Z,1520717535.506 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:32:15.912Z,1520717535.912 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:32:16.312Z,1520717536.312 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:32:16.711Z,1520717536.711 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:32:17.116Z,1520717537.116 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:32:17.503Z,1520717537.503 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:32:17.904Z,1520717537.904 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:32:18.312Z,1520717538.312 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:32:18.717Z,1520717538.717 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:32:19.107Z,1520717539.107 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:32:19.502Z,1520717539.502 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:32:19.902Z,1520717539.902 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:32:20.320Z,1520717540.320 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:32:20.707Z,1520717540.707 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:32:21.100Z,1520717541.100 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:32:21.511Z,1520717541.511 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:32:21.909Z,1520717541.909 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:32:22.307Z,1520717542.307 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:32:22.716Z,1520717542.716 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:32:23.102Z,1520717543.102 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:32:23.500Z,1520717543.500 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:32:23.911Z,1520717543.911 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:32:24.311Z,1520717544.311 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:32:24.711Z,1520717544.711 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:32:25.103Z,1520717545.103 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:32:25.520Z,1520717545.520 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:32:25.907Z,1520717545.907 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:32:26.312Z,1520717546.312 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:32:26.712Z,1520717546.712 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:32:27.109Z,1520717547.109 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:32:32.043Z,1520717552.043 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:32:32.337Z,1520717552.337 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:32:32.713Z,1520717552.713 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:32:33.116Z,1520717553.116 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:32:33.498Z,1520717553.498 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:32:33.898Z,1520717553.898 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:32:34.298Z,1520717554.298 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:32:34.698Z,1520717554.698 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:32:35.108Z,1520717555.108 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:32:35.506Z,1520717555.506 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:32:35.906Z,1520717555.906 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:32:36.306Z,1520717556.306 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:32:36.722Z,1520717556.722 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:32:37.096Z,1520717557.096 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:32:37.503Z,1520717557.503 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:32:37.904Z,1520717557.904 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:32:38.304Z,1520717558.304 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:32:38.713Z,1520717558.713 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:32:39.098Z,1520717559.098 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:32:39.498Z,1520717559.498 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:32:39.898Z,1520717559.898 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:32:40.302Z,1520717560.302 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:32:40.712Z,1520717560.712 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:32:41.106Z,1520717561.106 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:32:41.506Z,1520717561.506 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:32:41.907Z,1520717561.907 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:32:42.312Z,1520717562.312 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:32:42.698Z,1520717562.698 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:32:43.110Z,1520717563.110 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:32:43.500Z,1520717563.500 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:32:43.907Z,1520717563.907 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:32:44.316Z,1520717564.316 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:32:44.704Z,1520717564.704 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:32:45.112Z,1520717565.112 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:32:45.500Z,1520717565.500 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:32:45.918Z,1520717565.918 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:32:46.298Z,1520717566.298 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:32:46.704Z,1520717566.704 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:32:47.109Z,1520717567.109 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:32:47.506Z,1520717567.506 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:32:47.906Z,1520717567.906 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:32:48.306Z,1520717568.306 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:32:48.698Z,1520717568.698 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:32:49.103Z,1520717569.103 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:32:49.509Z,1520717569.509 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:32:49.910Z,1520717569.910 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:32:50.296Z,1520717570.296 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:32:50.716Z,1520717570.716 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:32:51.099Z,1520717571.099 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:32:51.499Z,1520717571.499 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:32:51.912Z,1520717571.912 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:32:52.298Z,1520717572.298 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:32:52.698Z,1520717572.698 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:32:53.117Z,1520717573.117 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:32:53.498Z,1520717573.498 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:32:53.906Z,1520717573.906 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:32:54.310Z,1520717574.310 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:32:54.706Z,1520717574.706 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:32:55.098Z,1520717575.098 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:32:55.499Z,1520717575.499 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:32:55.903Z,1520717575.903 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:32:56.305Z,1520717576.305 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:32:56.710Z,1520717576.710 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:32:57.098Z,1520717577.098 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:32:57.496Z,1520717577.496 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:32:57.910Z,1520717577.910 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:32:58.306Z,1520717578.306 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:32:58.712Z,1520717578.712 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:32:59.105Z,1520717579.105 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:32:59.498Z,1520717579.498 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:32:59.898Z,1520717579.898 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:33:00.298Z,1520717580.298 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:33:00.699Z,1520717580.699 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:33:01.099Z,1520717581.099 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:33:01.503Z,1520717581.503 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:33:01.909Z,1520717581.909 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:33:02.306Z,1520717582.306 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:33:02.314Z,1520717582.314 [BPC1](ERROR): Failed to receive battery data
2018-03-10T21:33:02.315Z,1520717582.315 [BPC1] Communications Fault, FailCount= 1
2018-03-10T21:33:02.315Z,1520717582.315 [BPC1](ERROR): Communications Fault
2018-03-10T21:33:02.402Z,1520717582.402 [CBIT](ERROR): Communications Fault in component: BPC1
2018-03-10T21:33:02.705Z,1520717582.705 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:33:03.098Z,1520717583.098 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:33:03.509Z,1520717583.509 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:33:03.587Z,1520717583.587 [CBIT](INFO): Clearing failed state for component BPC1
2018-03-10T21:33:03.587Z,1520717583.587 [BPC1] No Fault, FailCount= 1
2018-03-10T21:33:03.918Z,1520717583.918 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:33:04.312Z,1520717584.312 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:33:04.698Z,1520717584.698 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:33:05.098Z,1520717585.098 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:33:05.504Z,1520717585.504 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:33:05.898Z,1520717585.898 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:33:06.319Z,1520717586.319 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:33:06.705Z,1520717586.705 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:33:07.098Z,1520717587.098 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:33:07.513Z,1520717587.513 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:33:07.899Z,1520717587.899 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:33:08.302Z,1520717588.302 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:33:08.709Z,1520717588.709 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:33:09.098Z,1520717589.098 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:33:09.496Z,1520717589.496 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:33:09.898Z,1520717589.898 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:33:10.321Z,1520717590.321 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:33:10.698Z,1520717590.698 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:33:11.107Z,1520717591.107 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:33:11.507Z,1520717591.507 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:33:11.906Z,1520717591.906 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:33:12.307Z,1520717592.307 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:33:12.698Z,1520717592.698 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:33:13.098Z,1520717593.098 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:33:13.504Z,1520717593.504 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:33:13.898Z,1520717593.898 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:33:14.304Z,1520717594.304 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:33:14.706Z,1520717594.706 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:33:15.109Z,1520717595.109 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:33:15.505Z,1520717595.505 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:33:15.898Z,1520717595.898 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:33:16.298Z,1520717596.298 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:33:16.698Z,1520717596.698 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:33:17.107Z,1520717597.107 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:33:17.513Z,1520717597.513 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:33:17.548Z,1520717597.548 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T21:33:17.548Z,1520717597.548 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 2
2018-03-10T21:33:17.548Z,1520717597.548 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-10T21:33:17.585Z,1520717597.585 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-10T21:33:17.907Z,1520717597.907 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:33:17.980Z,1520717597.980 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-10T21:33:17.980Z,1520717597.980 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 2
2018-03-10T21:33:18.313Z,1520717598.313 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:33:18.331Z,1520717598.331 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-10T21:33:18.339Z,1520717598.339 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-10T21:33:18.340Z,1520717598.340 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-10T21:33:18.697Z,1520717598.697 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:33:19.108Z,1520717599.108 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:33:19.510Z,1520717599.510 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:33:19.907Z,1520717599.907 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:33:20.307Z,1520717600.307 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:33:20.700Z,1520717600.700 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:33:21.097Z,1520717601.097 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:33:21.502Z,1520717601.502 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:33:21.908Z,1520717601.908 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:33:22.298Z,1520717602.298 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:33:22.699Z,1520717602.699 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:33:23.107Z,1520717603.107 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:33:23.503Z,1520717603.503 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:33:23.909Z,1520717603.909 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:33:24.303Z,1520717604.303 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:33:24.696Z,1520717604.696 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:33:25.102Z,1520717605.102 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:33:25.512Z,1520717605.512 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:33:25.898Z,1520717605.898 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:33:26.298Z,1520717606.298 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:33:26.698Z,1520717606.698 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:33:27.096Z,1520717607.096 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:33:27.498Z,1520717607.498 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:33:32.505Z,1520717612.505 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:33:32.676Z,1520717612.676 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:33:33.055Z,1520717613.055 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:33:33.450Z,1520717613.450 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:33:33.859Z,1520717613.859 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:33:34.250Z,1520717614.250 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:33:34.259Z,1520717614.259 [BPC1](FAULT): Failed to initialize
2018-03-10T21:33:34.259Z,1520717614.259 [BPC1] Communications Fault, FailCount= 2
2018-03-10T21:33:34.259Z,1520717614.259 [BPC1](ERROR): Communications Fault
2018-03-10T21:33:34.383Z,1520717614.383 [CBIT](ERROR): Communications Fault in component: BPC1
2018-03-10T21:33:34.661Z,1520717614.661 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:33:35.058Z,1520717615.058 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:33:35.466Z,1520717615.466 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:33:35.519Z,1520717615.519 [CBIT](INFO): Clearing failed state for component BPC1
2018-03-10T21:33:35.519Z,1520717615.519 [BPC1] No Fault, FailCount= 2
2018-03-10T21:33:35.863Z,1520717615.863 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:33:36.261Z,1520717616.261 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:33:36.650Z,1520717616.650 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:33:37.088Z,1520717617.088 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:33:37.450Z,1520717617.450 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:33:37.857Z,1520717617.857 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:33:38.264Z,1520717618.264 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:33:38.659Z,1520717618.659 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:33:39.063Z,1520717619.063 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:33:39.450Z,1520717619.450 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:33:39.859Z,1520717619.859 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:33:40.264Z,1520717620.264 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:33:40.661Z,1520717620.661 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:33:41.058Z,1520717621.058 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:33:41.469Z,1520717621.469 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:33:41.864Z,1520717621.864 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:33:42.259Z,1520717622.259 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:33:42.659Z,1520717622.659 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:33:43.059Z,1520717623.059 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:33:43.470Z,1520717623.470 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:33:43.864Z,1520717623.864 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:33:44.253Z,1520717624.253 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:33:44.651Z,1520717624.651 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:33:45.070Z,1520717625.070 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:33:45.445Z,1520717625.445 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:33:45.867Z,1520717625.867 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:33:46.260Z,1520717626.260 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:33:46.656Z,1520717626.656 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:33:47.058Z,1520717627.058 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:33:47.450Z,1520717627.450 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:33:47.850Z,1520717627.850 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:33:48.250Z,1520717628.250 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:33:48.655Z,1520717628.655 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:33:49.052Z,1520717629.052 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:33:49.458Z,1520717629.458 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:33:49.870Z,1520717629.870 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:33:50.250Z,1520717630.250 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:33:50.650Z,1520717630.650 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:33:51.060Z,1520717631.060 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:33:51.457Z,1520717631.457 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:33:51.859Z,1520717631.859 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:33:52.262Z,1520717632.262 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:33:52.650Z,1520717632.650 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:33:53.058Z,1520717633.058 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:33:53.461Z,1520717633.461 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:33:53.865Z,1520717633.865 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:33:54.258Z,1520717634.258 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:33:54.663Z,1520717634.663 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:33:55.048Z,1520717635.048 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:33:55.450Z,1520717635.450 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:33:55.859Z,1520717635.859 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:33:56.274Z,1520717636.274 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:33:56.659Z,1520717636.659 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:33:57.051Z,1520717637.051 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:33:57.448Z,1520717637.448 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:33:57.866Z,1520717637.866 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:33:58.258Z,1520717638.258 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:33:58.656Z,1520717638.656 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:33:59.050Z,1520717639.050 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:33:59.450Z,1520717639.450 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:33:59.848Z,1520717639.848 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:34:00.251Z,1520717640.251 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:34:00.664Z,1520717640.664 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:34:01.060Z,1520717641.060 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:34:01.450Z,1520717641.450 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:34:01.850Z,1520717641.850 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:34:02.248Z,1520717642.248 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:34:02.664Z,1520717642.664 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:34:03.059Z,1520717643.059 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:34:03.460Z,1520717643.460 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:34:03.852Z,1520717643.852 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:34:04.269Z,1520717644.269 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:34:04.648Z,1520717644.648 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:34:05.056Z,1520717645.056 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:34:05.459Z,1520717645.459 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:34:05.858Z,1520717645.858 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:34:06.257Z,1520717646.257 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:34:06.278Z,1520717646.278 [BPC1](FAULT): Failed to initialize
2018-03-10T21:34:06.278Z,1520717646.278 [BPC1] Communications Fault, FailCount= 3
2018-03-10T21:34:06.278Z,1520717646.278 [BPC1](ERROR): Communications Fault
2018-03-10T21:34:06.357Z,1520717646.357 [CBIT](ERROR): Communications Fault in component: BPC1
2018-03-10T21:34:06.655Z,1520717646.655 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:34:07.055Z,1520717647.055 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:34:07.451Z,1520717647.451 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:34:07.550Z,1520717647.550 [CBIT](INFO): Clearing failed state for component BPC1
2018-03-10T21:34:07.550Z,1520717647.550 [BPC1] No Fault, FailCount= 3
2018-03-10T21:34:07.858Z,1520717647.858 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:34:08.259Z,1520717648.259 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:34:08.651Z,1520717648.651 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:34:09.071Z,1520717649.071 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:34:09.458Z,1520717649.458 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:34:09.860Z,1520717649.860 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:34:10.255Z,1520717650.255 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:34:10.663Z,1520717650.663 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:34:11.052Z,1520717651.052 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:34:11.459Z,1520717651.459 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:34:11.859Z,1520717651.859 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:34:12.257Z,1520717652.257 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:34:12.662Z,1520717652.662 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:34:13.050Z,1520717653.050 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:34:13.451Z,1520717653.451 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:34:13.856Z,1520717653.856 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:34:14.264Z,1520717654.264 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:34:14.667Z,1520717654.667 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:34:15.058Z,1520717655.058 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:34:15.489Z,1520717655.489 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:34:15.866Z,1520717655.866 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:34:16.250Z,1520717656.250 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:34:16.657Z,1520717656.657 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:34:17.051Z,1520717657.051 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:34:17.460Z,1520717657.460 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:34:17.861Z,1520717657.861 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:34:18.253Z,1520717658.253 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:34:18.650Z,1520717658.650 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:34:19.050Z,1520717659.050 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:34:19.448Z,1520717659.448 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:34:19.859Z,1520717659.859 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:34:20.258Z,1520717660.258 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:34:20.651Z,1520717660.651 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:34:21.051Z,1520717661.051 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:34:21.450Z,1520717661.450 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:34:21.875Z,1520717661.875 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:34:22.255Z,1520717662.255 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:34:22.657Z,1520717662.657 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:34:23.058Z,1520717663.058 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:34:23.467Z,1520717663.467 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:34:23.858Z,1520717663.858 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:34:24.250Z,1520717664.250 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:34:24.650Z,1520717664.650 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:34:25.050Z,1520717665.050 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:34:25.449Z,1520717665.449 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:34:25.849Z,1520717665.849 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:34:26.302Z,1520717666.302 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:34:26.646Z,1520717666.646 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:34:27.055Z,1520717667.055 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:34:27.460Z,1520717667.460 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:34:27.858Z,1520717667.858 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:34:32.865Z,1520717672.865 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:34:33.012Z,1520717673.012 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:34:33.383Z,1520717673.383 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:34:33.773Z,1520717673.773 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:34:34.176Z,1520717674.176 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:34:34.576Z,1520717674.576 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:34:35.009Z,1520717675.009 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:34:35.404Z,1520717675.404 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:34:35.798Z,1520717675.798 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:34:36.185Z,1520717676.185 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:34:36.599Z,1520717676.599 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:34:37.009Z,1520717677.009 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:34:37.383Z,1520717677.383 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:34:37.803Z,1520717677.803 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:34:38.173Z,1520717678.173 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:34:38.189Z,1520717678.189 [BPC1](FAULT): Failed to initialize
2018-03-10T21:34:38.190Z,1520717678.190 [BPC1] Communications Fault, FailCount= 4
2018-03-10T21:34:38.190Z,1520717678.190 [BPC1](ERROR): Communications Fault
2018-03-10T21:34:38.309Z,1520717678.309 [CBIT](ERROR): Communications Fault in component: BPC1
2018-03-10T21:34:38.591Z,1520717678.591 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:34:39.005Z,1520717679.005 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:34:39.372Z,1520717679.372 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:34:39.460Z,1520717679.460 [CBIT](INFO): Clearing failed state for component BPC1
2018-03-10T21:34:39.460Z,1520717679.460 [BPC1] No Fault, FailCount= 4
2018-03-10T21:34:39.785Z,1520717679.785 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:34:40.182Z,1520717680.182 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:34:40.571Z,1520717680.571 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:34:40.981Z,1520717680.981 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:34:41.377Z,1520717681.377 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:34:41.776Z,1520717681.776 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:34:42.175Z,1520717682.175 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:34:42.564Z,1520717682.564 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:34:42.973Z,1520717682.973 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:34:43.432Z,1520717683.432 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:34:43.789Z,1520717683.789 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:34:44.191Z,1520717684.191 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:34:44.595Z,1520717684.595 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:34:45.022Z,1520717685.022 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:34:45.372Z,1520717685.372 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:34:45.820Z,1520717685.820 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:34:46.184Z,1520717686.184 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:34:46.607Z,1520717686.607 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:34:46.963Z,1520717686.963 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:34:47.382Z,1520717687.382 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:34:47.795Z,1520717687.795 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:34:48.166Z,1520717688.166 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:34:48.568Z,1520717688.568 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:34:48.977Z,1520717688.977 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:34:49.374Z,1520717689.374 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:34:49.758Z,1520717689.758 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:34:50.177Z,1520717690.177 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:34:50.573Z,1520717690.573 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:34:51.029Z,1520717691.029 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:34:51.404Z,1520717691.404 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:34:51.781Z,1520717691.781 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:34:52.189Z,1520717692.189 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:34:52.621Z,1520717692.621 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:34:52.971Z,1520717692.971 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:34:53.408Z,1520717693.408 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:34:53.772Z,1520717693.772 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:34:54.193Z,1520717694.193 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:34:54.596Z,1520717694.596 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:34:54.973Z,1520717694.973 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:34:55.375Z,1520717695.375 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:34:55.763Z,1520717695.763 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:34:56.186Z,1520717696.186 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:34:56.585Z,1520717696.585 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:34:56.971Z,1520717696.971 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:34:57.372Z,1520717697.372 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:34:57.764Z,1520717697.764 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:34:58.158Z,1520717698.158 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:34:58.611Z,1520717698.611 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:34:59.017Z,1520717699.017 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:34:59.416Z,1520717699.416 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:34:59.780Z,1520717699.780 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:35:00.194Z,1520717700.194 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:35:00.608Z,1520717700.608 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:35:01.007Z,1520717701.007 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:35:01.371Z,1520717701.371 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:35:01.776Z,1520717701.776 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:35:02.213Z,1520717702.213 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:35:02.580Z,1520717702.580 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:35:02.976Z,1520717702.976 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:35:03.380Z,1520717703.380 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:35:03.789Z,1520717703.789 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:35:04.168Z,1520717704.168 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:35:04.567Z,1520717704.567 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:35:04.969Z,1520717704.969 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:35:05.368Z,1520717705.368 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:35:05.821Z,1520717705.821 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:35:06.197Z,1520717706.197 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:35:06.624Z,1520717706.624 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:35:07.025Z,1520717707.025 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:35:07.401Z,1520717707.401 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:35:07.820Z,1520717707.820 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:35:08.227Z,1520717708.227 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:35:08.594Z,1520717708.594 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:35:09.054Z,1520717709.054 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:35:09.438Z,1520717709.438 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:35:09.845Z,1520717709.845 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:35:10.223Z,1520717710.223 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:35:10.610Z,1520717710.610 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:35:10.980Z,1520717710.980 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:35:11.385Z,1520717711.385 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:35:11.787Z,1520717711.787 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:35:12.173Z,1520717712.173 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:35:12.565Z,1520717712.565 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:35:12.965Z,1520717712.965 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:35:13.370Z,1520717713.370 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:35:13.824Z,1520717713.824 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:35:14.189Z,1520717714.189 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:35:14.589Z,1520717714.589 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:35:14.997Z,1520717714.997 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:35:15.407Z,1520717715.407 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:35:15.769Z,1520717715.769 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:35:16.222Z,1520717716.222 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:35:16.569Z,1520717716.569 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:35:16.996Z,1520717716.996 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:35:17.414Z,1520717717.414 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:35:17.781Z,1520717717.781 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:35:18.185Z,1520717718.185 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:35:18.563Z,1520717718.563 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:35:18.984Z,1520717718.984 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:35:19.380Z,1520717719.380 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:35:19.762Z,1520717719.762 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:35:20.165Z,1520717720.165 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:35:20.564Z,1520717720.564 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:35:20.963Z,1520717720.963 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:35:21.420Z,1520717721.420 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:35:21.792Z,1520717721.792 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:35:22.188Z,1520717722.188 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:35:22.603Z,1520717722.603 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:35:23.006Z,1520717723.006 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:35:23.378Z,1520717723.378 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:35:23.823Z,1520717723.823 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:35:24.168Z,1520717724.168 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:35:24.586Z,1520717724.586 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:35:25.013Z,1520717725.013 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:35:25.385Z,1520717725.385 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:35:25.769Z,1520717725.769 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:35:26.166Z,1520717726.166 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:35:26.585Z,1520717726.585 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:35:26.986Z,1520717726.986 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:35:27.035Z,1520717727.035 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-03-10T21:35:27.035Z,1520717727.035 [Default:CheckIn:C.Wait] Stopped
2018-03-10T21:35:27.035Z,1520717727.035 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-03-10T21:35:27.036Z,1520717727.036 [Default:CheckIn:D] Running Loop=1
2018-03-10T21:35:27.378Z,1520717727.378 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:35:27.406Z,1520717727.406 [Default:CheckIn:D] Stopped
2018-03-10T21:35:27.406Z,1520717727.406 [Default:CheckIn:E] Running Loop=1
2018-03-10T21:35:27.773Z,1520717727.773 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:35:27.802Z,1520717727.802 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 976.158073 min 
2018-03-10T21:35:27.802Z,1520717727.802 [Default:CheckIn:E] Stopped
2018-03-10T21:35:27.802Z,1520717727.802 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-03-10T21:35:27.802Z,1520717727.802 [Default:CheckIn] Stopped
2018-03-10T21:35:27.803Z,1520717727.803 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-03-10T21:35:27.803Z,1520717727.803 [Default:CheckIn](INFO): Running loop #97
2018-03-10T21:35:27.803Z,1520717727.803 [Default:CheckIn] Running Loop=97
2018-03-10T21:35:27.803Z,1520717727.803 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-03-10T21:35:27.803Z,1520717727.803 [Default:CheckIn:Read_GPS] Running Loop=1
2018-03-10T21:35:28.169Z,1520717728.169 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:35:33.203Z,1520717733.203 [NAL9602](INFO): Powering up
2018-03-10T21:35:33.223Z,1520717733.223 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:35:33.401Z,1520717733.401 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:35:33.758Z,1520717733.758 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:35:34.172Z,1520717734.172 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:35:34.562Z,1520717734.562 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:35:34.959Z,1520717734.959 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:35:35.366Z,1520717735.366 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:35:35.763Z,1520717735.763 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:35:36.156Z,1520717736.156 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:35:36.584Z,1520717736.584 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:35:36.949Z,1520717736.949 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:35:37.394Z,1520717737.394 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:35:37.782Z,1520717737.782 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:35:38.188Z,1520717738.188 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:35:38.584Z,1520717738.584 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:35:38.969Z,1520717738.969 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:35:39.405Z,1520717739.405 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:35:39.769Z,1520717739.769 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:35:40.184Z,1520717740.184 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:35:40.588Z,1520717740.588 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:35:40.969Z,1520717740.969 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:35:41.377Z,1520717741.377 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:35:41.756Z,1520717741.756 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:35:42.162Z,1520717742.162 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:35:42.562Z,1520717742.562 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:35:42.956Z,1520717742.956 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:35:43.362Z,1520717743.362 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:35:43.776Z,1520717743.776 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:35:44.136Z,1520717744.136 [NAL9602](INFO): NAL9602 initialized
2018-03-10T21:35:44.164Z,1520717744.164 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:35:44.572Z,1520717744.572 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:35:45.014Z,1520717745.014 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:35:45.408Z,1520717745.408 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:35:45.795Z,1520717745.795 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:35:46.194Z,1520717746.194 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:35:46.605Z,1520717746.605 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:35:46.971Z,1520717746.971 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:35:47.388Z,1520717747.388 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:35:47.786Z,1520717747.786 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:35:48.180Z,1520717748.180 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:35:48.610Z,1520717748.610 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:35:48.964Z,1520717748.964 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:35:49.379Z,1520717749.379 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:35:49.780Z,1520717749.780 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:35:50.162Z,1520717750.162 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:35:50.577Z,1520717750.577 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:35:50.982Z,1520717750.982 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:35:51.360Z,1520717751.360 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:35:51.757Z,1520717751.757 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:35:52.157Z,1520717752.157 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:35:52.573Z,1520717752.573 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:35:52.657Z,1520717752.657 [CBIT](DEBUG): EFC running - data check-sum false
2018-03-10T21:35:53.025Z,1520717753.025 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:35:53.390Z,1520717753.390 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:35:53.797Z,1520717753.797 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:35:54.179Z,1520717754.179 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:35:54.597Z,1520717754.597 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:35:54.967Z,1520717754.967 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:35:55.372Z,1520717755.372 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:35:55.765Z,1520717755.765 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:35:56.179Z,1520717756.179 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:35:56.602Z,1520717756.602 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:35:56.961Z,1520717756.961 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:35:57.378Z,1520717757.378 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:35:57.789Z,1520717757.789 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:35:58.181Z,1520717758.181 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:35:58.588Z,1520717758.588 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:35:58.985Z,1520717758.985 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:35:58.999Z,1520717758.999 [BPC1](ERROR): Bank A: No match for stick 5 serial number:1717 in the onboard configuration file.
2018-03-10T21:35:58.999Z,1520717758.999 [BPC1](ERROR): Failed to parse Bank A battery data
2018-03-10T21:35:58.999Z,1520717758.999 [BPC1] Data Fault, FailCount= 1
2018-03-10T21:35:58.999Z,1520717758.999 [BPC1](ERROR): Data Fault
2018-03-10T21:35:59.067Z,1520717759.067 [CBIT](ERROR): Data Fault in component: BPC1
2018-03-10T21:35:59.385Z,1520717759.385 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:35:59.756Z,1520717759.756 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:36:00.157Z,1520717760.157 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:36:00.257Z,1520717760.257 [CBIT](INFO): Clearing failed state for component BPC1
2018-03-10T21:36:00.257Z,1520717760.257 [BPC1] No Fault, FailCount= 1
2018-03-10T21:36:00.561Z,1520717760.561 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:36:00.996Z,1520717760.996 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:36:01.388Z,1520717761.388 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:36:01.774Z,1520717761.774 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:36:02.181Z,1520717762.181 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:36:02.615Z,1520717762.615 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:36:02.975Z,1520717762.975 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:36:03.396Z,1520717763.396 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:36:03.770Z,1520717763.770 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:36:04.194Z,1520717764.194 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:36:04.592Z,1520717764.592 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:36:04.961Z,1520717764.961 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:36:05.377Z,1520717765.377 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:36:05.771Z,1520717765.771 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:36:06.181Z,1520717766.181 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:36:06.588Z,1520717766.588 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:36:06.987Z,1520717766.987 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:36:07.374Z,1520717767.374 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:36:07.766Z,1520717767.766 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:36:08.166Z,1520717768.166 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:36:08.571Z,1520717768.571 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:36:08.998Z,1520717768.998 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:36:09.366Z,1520717769.366 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:36:09.806Z,1520717769.806 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:36:10.182Z,1520717770.182 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:36:10.600Z,1520717770.600 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:36:10.964Z,1520717770.964 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:36:11.403Z,1520717771.403 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:36:11.774Z,1520717771.774 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:36:12.194Z,1520717772.194 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:36:12.598Z,1520717772.598 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:36:12.979Z,1520717772.979 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:36:13.386Z,1520717773.386 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:36:13.763Z,1520717773.763 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:36:14.174Z,1520717774.174 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:36:14.576Z,1520717774.576 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:36:14.958Z,1520717774.958 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:36:15.363Z,1520717775.363 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:36:15.761Z,1520717775.761 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:36:16.166Z,1520717776.166 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:36:16.618Z,1520717776.618 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:36:16.993Z,1520717776.993 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:36:17.412Z,1520717777.412 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:36:17.785Z,1520717777.785 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:36:18.194Z,1520717778.194 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:36:18.568Z,1520717778.568 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:36:18.615Z,1520717778.615 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T21:36:18.615Z,1520717778.615 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 3
2018-03-10T21:36:18.616Z,1520717778.616 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-10T21:36:18.636Z,1520717778.636 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-10T21:36:18.989Z,1520717778.989 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:36:19.066Z,1520717779.066 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-10T21:36:19.079Z,1520717779.079 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 3
2018-03-10T21:36:19.373Z,1520717779.373 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:36:19.408Z,1520717779.408 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-10T21:36:19.409Z,1520717779.409 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-10T21:36:19.409Z,1520717779.409 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-10T21:36:19.781Z,1520717779.781 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:36:20.201Z,1520717780.201 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:36:20.564Z,1520717780.564 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:36:20.982Z,1520717780.982 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:36:21.359Z,1520717781.359 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:36:21.781Z,1520717781.781 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:36:22.190Z,1520717782.190 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:36:22.574Z,1520717782.574 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:36:22.972Z,1520717782.972 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:36:23.362Z,1520717783.362 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:36:23.774Z,1520717783.774 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:36:24.185Z,1520717784.185 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:36:24.588Z,1520717784.588 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:36:24.992Z,1520717784.992 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:36:25.366Z,1520717785.366 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:36:25.795Z,1520717785.795 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:36:26.192Z,1520717786.192 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:36:26.566Z,1520717786.566 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:36:27.022Z,1520717787.022 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:36:27.376Z,1520717787.376 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:36:27.789Z,1520717787.789 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:36:28.208Z,1520717788.208 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:36:28.566Z,1520717788.566 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:36:33.542Z,1520717793.542 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:36:33.715Z,1520717793.715 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:36:34.126Z,1520717794.126 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:36:34.524Z,1520717794.524 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:36:34.953Z,1520717794.953 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:36:35.312Z,1520717795.312 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:36:35.704Z,1520717795.704 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:36:36.106Z,1520717796.106 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:36:36.511Z,1520717796.511 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:36:36.905Z,1520717796.905 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:36:37.299Z,1520717797.299 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:36:37.704Z,1520717797.704 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:36:38.102Z,1520717798.102 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:36:38.504Z,1520717798.504 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:36:38.917Z,1520717798.917 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:36:39.309Z,1520717799.309 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:36:39.699Z,1520717799.699 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:36:40.117Z,1520717800.117 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:36:40.504Z,1520717800.504 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:36:40.907Z,1520717800.907 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:36:41.309Z,1520717801.309 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:36:41.707Z,1520717801.707 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:36:42.099Z,1520717802.099 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:36:42.511Z,1520717802.511 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:36:42.918Z,1520717802.918 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:36:43.312Z,1520717803.312 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:36:43.704Z,1520717803.704 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:36:44.098Z,1520717804.098 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:36:44.510Z,1520717804.510 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:36:44.907Z,1520717804.907 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:36:45.309Z,1520717805.309 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:36:45.707Z,1520717805.707 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:36:46.098Z,1520717806.098 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:36:46.498Z,1520717806.498 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:36:46.918Z,1520717806.918 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:36:47.321Z,1520717807.321 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:36:47.713Z,1520717807.713 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:36:48.107Z,1520717808.107 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:36:48.504Z,1520717808.504 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:36:48.904Z,1520717808.904 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:36:49.298Z,1520717809.298 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:36:49.703Z,1520717809.703 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:36:50.100Z,1520717810.100 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:36:50.512Z,1520717810.512 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:36:50.911Z,1520717810.911 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:36:51.304Z,1520717811.304 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:36:51.711Z,1520717811.711 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:36:52.120Z,1520717812.120 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:36:52.498Z,1520717812.498 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:36:52.899Z,1520717812.899 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:36:53.302Z,1520717813.302 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:36:53.707Z,1520717813.707 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:36:54.108Z,1520717814.108 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:36:54.498Z,1520717814.498 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:36:54.899Z,1520717814.899 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:36:55.304Z,1520717815.304 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:36:55.720Z,1520717815.720 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:36:56.118Z,1520717816.118 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:36:56.513Z,1520717816.513 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:36:56.899Z,1520717816.898 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:36:57.307Z,1520717817.307 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:36:57.709Z,1520717817.709 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:36:58.106Z,1520717818.106 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:36:58.514Z,1520717818.514 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:36:58.907Z,1520717818.907 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:36:59.308Z,1520717819.308 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:36:59.698Z,1520717819.698 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:37:00.102Z,1520717820.102 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:37:00.508Z,1520717820.508 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:37:00.911Z,1520717820.911 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:37:01.312Z,1520717821.312 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:37:01.713Z,1520717821.713 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:37:02.099Z,1520717822.099 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:37:02.504Z,1520717822.504 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:37:02.913Z,1520717822.913 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:37:03.308Z,1520717823.308 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:37:03.713Z,1520717823.713 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:37:04.121Z,1520717824.121 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:37:04.502Z,1520717824.502 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:37:04.900Z,1520717824.900 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:37:05.308Z,1520717825.308 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:37:05.707Z,1520717825.707 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:37:06.107Z,1520717826.107 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:37:06.499Z,1520717826.499 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:37:06.899Z,1520717826.899 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:37:07.297Z,1520717827.297 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:37:07.704Z,1520717827.704 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:37:08.100Z,1520717828.100 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:37:08.508Z,1520717828.508 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:37:08.911Z,1520717828.911 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:37:09.305Z,1520717829.305 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:37:09.698Z,1520717829.698 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:37:10.141Z,1520717830.141 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:37:10.504Z,1520717830.504 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:37:10.899Z,1520717830.899 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:37:11.309Z,1520717831.309 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:37:11.712Z,1520717831.712 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:37:12.108Z,1520717832.108 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:37:12.512Z,1520717832.512 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:37:12.900Z,1520717832.900 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:37:13.303Z,1520717833.303 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:37:13.707Z,1520717833.707 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:37:14.118Z,1520717834.118 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:37:14.512Z,1520717834.512 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:37:14.899Z,1520717834.899 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:37:15.304Z,1520717835.304 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:37:15.682Z,1520717835.682 [NAL9602](INFO): SBD MO Status=0, MOMSN=5849, MT Status=0, MTMSN=0
2018-03-10T21:37:15.683Z,1520717835.683 [NAL9602](INFO): No messages in MT queue
2018-03-10T21:37:15.724Z,1520717835.724 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:37:16.098Z,1520717836.098 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:37:16.522Z,1520717836.522 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:37:16.922Z,1520717836.922 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:37:17.318Z,1520717837.318 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:37:17.713Z,1520717837.713 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:37:18.106Z,1520717838.106 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:37:18.516Z,1520717838.516 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:37:18.912Z,1520717838.912 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:37:19.314Z,1520717839.314 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:37:19.717Z,1520717839.717 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:37:20.119Z,1520717840.119 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:37:20.505Z,1520717840.505 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:37:20.906Z,1520717840.906 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:37:21.318Z,1520717841.318 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:37:21.707Z,1520717841.707 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:37:22.118Z,1520717842.118 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:37:22.526Z,1520717842.526 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:37:22.917Z,1520717842.917 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:37:23.303Z,1520717843.303 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:37:23.708Z,1520717843.708 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:37:24.108Z,1520717844.108 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:37:24.516Z,1520717844.516 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:37:24.904Z,1520717844.904 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:37:25.319Z,1520717845.319 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:37:25.719Z,1520717845.719 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:37:26.119Z,1520717846.119 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:37:26.507Z,1520717846.507 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:37:26.908Z,1520717846.908 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:37:27.308Z,1520717847.308 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:37:27.699Z,1520717847.699 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:37:28.122Z,1520717848.122 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:37:28.528Z,1520717848.528 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:37:28.923Z,1520717848.923 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:37:33.947Z,1520717853.947 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:37:34.107Z,1520717854.107 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:37:34.505Z,1520717854.505 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:37:34.902Z,1520717854.902 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:37:35.306Z,1520717855.306 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:37:35.684Z,1520717855.684 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:37:36.084Z,1520717856.084 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:37:36.485Z,1520717856.485 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:37:36.884Z,1520717856.884 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:37:37.298Z,1520717857.298 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:37:37.699Z,1520717857.699 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:37:38.102Z,1520717858.102 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:37:38.492Z,1520717858.492 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:37:38.888Z,1520717858.888 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:37:39.297Z,1520717859.297 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:37:39.711Z,1520717859.711 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:37:40.088Z,1520717860.088 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:37:40.498Z,1520717860.498 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:37:40.902Z,1520717860.902 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:37:41.301Z,1520717861.301 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:37:41.683Z,1520717861.683 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:37:42.096Z,1520717862.096 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:37:42.497Z,1520717862.497 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:37:42.882Z,1520717862.882 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:37:43.302Z,1520717863.302 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:37:43.698Z,1520717863.698 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:37:44.102Z,1520717864.102 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:37:44.495Z,1520717864.495 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:37:44.889Z,1520717864.889 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:37:45.283Z,1520717865.283 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:37:45.713Z,1520717865.713 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:37:46.084Z,1520717866.084 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:37:46.501Z,1520717866.501 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:37:46.904Z,1520717866.904 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:37:47.298Z,1520717867.298 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:37:47.684Z,1520717867.684 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:37:48.094Z,1520717868.094 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:37:48.492Z,1520717868.492 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:37:48.885Z,1520717868.885 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:37:49.307Z,1520717869.307 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:37:49.704Z,1520717869.704 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:37:50.105Z,1520717870.105 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:37:50.482Z,1520717870.482 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:37:50.883Z,1520717870.883 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:37:51.288Z,1520717871.288 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:37:51.698Z,1520717871.698 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:37:52.089Z,1520717872.089 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:37:52.509Z,1520717872.509 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:37:52.924Z,1520717872.924 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:37:53.294Z,1520717873.294 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:37:53.692Z,1520717873.692 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:37:54.082Z,1520717874.082 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:37:54.492Z,1520717874.492 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:37:54.882Z,1520717874.882 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:37:55.298Z,1520717875.298 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:37:55.694Z,1520717875.694 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:37:56.094Z,1520717876.094 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:37:56.494Z,1520717876.494 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:37:56.879Z,1520717876.879 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:37:57.292Z,1520717877.292 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:37:57.684Z,1520717877.684 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:37:58.077Z,1520717878.077 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:37:58.506Z,1520717878.506 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:37:58.898Z,1520717878.898 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:37:59.294Z,1520717879.294 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:37:59.695Z,1520717879.695 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:38:00.088Z,1520717880.088 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:38:00.496Z,1520717880.496 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:38:00.883Z,1520717880.883 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:38:01.304Z,1520717881.304 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:38:01.698Z,1520717881.698 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:38:02.098Z,1520717882.098 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:38:02.492Z,1520717882.492 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:38:02.883Z,1520717882.883 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:38:03.293Z,1520717883.293 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:38:03.701Z,1520717883.701 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:38:04.091Z,1520717884.091 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:38:04.505Z,1520717884.505 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:38:04.904Z,1520717884.904 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:38:05.301Z,1520717885.301 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:38:05.692Z,1520717885.692 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:38:06.093Z,1520717886.093 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:38:06.489Z,1520717886.489 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:38:06.888Z,1520717886.888 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:38:07.304Z,1520717887.304 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:38:07.698Z,1520717887.698 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:38:08.106Z,1520717888.106 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:38:08.494Z,1520717888.494 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:38:08.884Z,1520717888.884 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:38:09.288Z,1520717889.288 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:38:09.692Z,1520717889.692 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:38:10.081Z,1520717890.081 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:38:10.502Z,1520717890.502 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:38:10.906Z,1520717890.906 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:38:11.313Z,1520717891.313 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:38:11.684Z,1520717891.684 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:38:12.083Z,1520717892.083 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:38:12.484Z,1520717892.484 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:38:12.888Z,1520717892.888 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:38:13.292Z,1520717893.292 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:38:13.715Z,1520717893.715 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:38:14.098Z,1520717894.098 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:38:14.500Z,1520717894.500 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:38:14.883Z,1520717894.883 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:38:15.292Z,1520717895.292 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:38:15.690Z,1520717895.690 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:38:16.087Z,1520717896.087 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:38:16.505Z,1520717896.505 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:38:16.898Z,1520717896.898 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:38:17.302Z,1520717897.302 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:38:17.683Z,1520717897.683 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:38:18.083Z,1520717898.083 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:38:18.492Z,1520717898.492 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:38:18.895Z,1520717898.895 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:38:19.313Z,1520717899.313 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:38:19.705Z,1520717899.705 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:38:20.108Z,1520717900.108 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:38:20.489Z,1520717900.489 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:38:20.881Z,1520717900.881 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:38:21.288Z,1520717901.288 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:38:21.691Z,1520717901.691 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:38:22.081Z,1520717902.081 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:38:22.501Z,1520717902.501 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:38:22.868Z,1520717902.868 [NAL9602](INFO): GPS fix at 20180310T213821: (21.311597, -157.874485)
2018-03-10T21:38:22.906Z,1520717902.906 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:38:23.014Z,1520717903.014 [Default:CheckIn:Read_GPS] Stopped
2018-03-10T21:38:23.014Z,1520717903.014 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-03-10T21:38:23.301Z,1520717903.301 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:38:24.121Z,1520717904.121 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:38:24.245Z,1520717904.245 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:38:24.691Z,1520717904.691 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:38:25.056Z,1520717905.056 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:38:25.436Z,1520717905.436 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:38:25.916Z,1520717905.916 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:38:26.250Z,1520717906.250 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:38:26.644Z,1520717906.644 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:38:31.967Z,1520717911.967 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:38:32.126Z,1520717912.126 [DataOverHttps](INFO): Sending 63 bytes from file Logs/20180310T051512/Courier0388.lzma
2018-03-10T21:38:32.198Z,1520717912.198 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:38:32.584Z,1520717912.584 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:38:32.926Z,1520717912.926 [DataOverHttps](INFO): Moved sent file to Logs/20180310T051512/Courier0388.lzma.bak
2018-03-10T21:38:32.926Z,1520717912.926 [DataOverHttps](INFO): SBD MOMSN=8008617
2018-03-10T21:38:33.036Z,1520717913.036 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:38:33.846Z,1520717913.846 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:38:33.993Z,1520717913.993 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:38:34.380Z,1520717914.380 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:38:39.259Z,1520717919.259 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:38:39.436Z,1520717919.436 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:38:39.801Z,1520717919.801 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:38:40.210Z,1520717920.210 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:38:40.641Z,1520717920.641 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:38:40.986Z,1520717920.986 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:38:41.442Z,1520717921.442 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:38:46.365Z,1520717926.365 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:38:46.653Z,1520717926.653 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:38:46.928Z,1520717926.928 [DataOverHttps](INFO): Sending 167 bytes from file Logs/20180310T051512/Express0389.lzma
2018-03-10T21:38:46.980Z,1520717926.980 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:38:47.347Z,1520717927.347 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:38:47.729Z,1520717927.729 [DataOverHttps](INFO): Moved sent file to Logs/20180310T051512/Express0389.lzma.bak
2018-03-10T21:38:47.730Z,1520717927.730 [DataOverHttps](INFO): SBD MOMSN=8008620
2018-03-10T21:38:47.773Z,1520717927.773 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:38:48.663Z,1520717928.663 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:38:48.726Z,1520717928.726 [Default:CheckIn:Read_Iridium] Stopped
2018-03-10T21:38:48.727Z,1520717928.727 [Default:CheckIn:C.Wait] Running Loop=1
2018-03-10T21:38:48.727Z,1520717928.727 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-03-10T21:38:48.832Z,1520717928.832 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:38:55.725Z,1520717935.725 [NAL9602](INFO): Powering down
2018-03-10T21:38:55.835Z,1520717935.835 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:38:56.011Z,1520717936.011 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:38:56.399Z,1520717936.399 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:38:56.795Z,1520717936.795 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:38:57.179Z,1520717937.179 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:38:57.584Z,1520717937.584 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:38:57.986Z,1520717937.986 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:38:58.392Z,1520717938.392 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:38:58.790Z,1520717938.790 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:38:59.184Z,1520717939.184 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:38:59.580Z,1520717939.580 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:38:59.982Z,1520717939.982 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:39:00.381Z,1520717940.381 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:39:00.786Z,1520717940.786 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:39:01.176Z,1520717941.176 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:39:01.580Z,1520717941.580 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:39:01.988Z,1520717941.988 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:39:02.375Z,1520717942.375 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:39:02.772Z,1520717942.772 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:39:03.176Z,1520717943.176 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:39:03.576Z,1520717943.576 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:39:03.978Z,1520717943.978 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:39:04.378Z,1520717944.378 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:39:04.773Z,1520717944.773 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:39:05.184Z,1520717945.184 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:39:05.593Z,1520717945.593 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:39:05.987Z,1520717945.987 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:39:06.388Z,1520717946.388 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:39:06.787Z,1520717946.787 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:39:07.178Z,1520717947.178 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:39:07.600Z,1520717947.600 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:39:07.979Z,1520717947.979 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:39:08.384Z,1520717948.384 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:39:08.791Z,1520717948.791 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:39:09.188Z,1520717949.188 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:39:09.578Z,1520717949.578 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:39:09.978Z,1520717949.978 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:39:10.388Z,1520717950.388 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:39:10.793Z,1520717950.793 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:39:11.186Z,1520717951.186 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:39:11.592Z,1520717951.592 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:39:11.983Z,1520717951.983 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:39:12.379Z,1520717952.379 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:39:12.779Z,1520717952.779 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:39:13.188Z,1520717953.188 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:39:13.586Z,1520717953.586 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:39:13.993Z,1520717953.993 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:39:14.384Z,1520717954.384 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:39:14.778Z,1520717954.778 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:39:15.184Z,1520717955.184 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:39:15.578Z,1520717955.578 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:39:15.982Z,1520717955.982 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:39:16.391Z,1520717956.391 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:39:16.791Z,1520717956.791 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:39:17.179Z,1520717957.179 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:39:17.579Z,1520717957.579 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:39:17.983Z,1520717957.983 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:39:18.394Z,1520717958.394 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:39:18.779Z,1520717958.779 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:39:19.187Z,1520717959.187 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:39:19.578Z,1520717959.578 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:39:19.616Z,1520717959.616 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T21:39:19.616Z,1520717959.616 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 1
2018-03-10T21:39:19.616Z,1520717959.616 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-10T21:39:19.662Z,1520717959.662 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-10T21:39:20.004Z,1520717960.004 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:39:20.089Z,1520717960.089 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-10T21:39:20.089Z,1520717960.089 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 1
2018-03-10T21:39:20.397Z,1520717960.397 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:39:20.450Z,1520717960.450 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-10T21:39:20.451Z,1520717960.451 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-10T21:39:20.451Z,1520717960.451 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-10T21:39:20.779Z,1520717960.779 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:39:21.181Z,1520717961.181 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:39:21.583Z,1520717961.583 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:39:21.980Z,1520717961.980 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:39:22.392Z,1520717962.392 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:39:22.792Z,1520717962.792 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:39:23.188Z,1520717963.188 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:39:23.578Z,1520717963.578 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:39:23.979Z,1520717963.979 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:39:24.382Z,1520717964.382 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:39:24.794Z,1520717964.794 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:39:25.186Z,1520717965.186 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:39:25.586Z,1520717965.586 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:39:25.978Z,1520717965.978 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:39:26.378Z,1520717966.378 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:39:26.778Z,1520717966.778 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:39:27.182Z,1520717967.182 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:39:27.589Z,1520717967.589 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:39:27.986Z,1520717967.986 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:39:28.376Z,1520717968.376 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:39:28.778Z,1520717968.778 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:39:29.178Z,1520717969.178 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:39:29.580Z,1520717969.580 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:39:29.987Z,1520717969.987 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:39:30.392Z,1520717970.392 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:39:30.784Z,1520717970.784 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:39:31.187Z,1520717971.187 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:39:31.578Z,1520717971.578 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:39:31.979Z,1520717971.979 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:39:32.384Z,1520717972.384 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:39:32.786Z,1520717972.786 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:39:33.186Z,1520717973.186 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:39:33.593Z,1520717973.593 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:39:33.983Z,1520717973.983 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:39:34.378Z,1520717974.378 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:39:34.779Z,1520717974.779 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:39:35.178Z,1520717975.178 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:39:35.587Z,1520717975.587 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:39:35.992Z,1520717975.992 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:39:36.386Z,1520717976.386 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:39:36.794Z,1520717976.794 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:39:37.196Z,1520717977.196 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:39:37.578Z,1520717977.578 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:39:37.978Z,1520717977.978 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:39:38.384Z,1520717978.384 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:39:38.792Z,1520717978.792 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:39:39.193Z,1520717979.193 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:39:39.590Z,1520717979.590 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:39:39.979Z,1520717979.979 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:39:40.378Z,1520717980.378 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:39:40.788Z,1520717980.788 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:39:41.186Z,1520717981.186 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:39:41.586Z,1520717981.586 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:39:41.985Z,1520717981.985 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:39:42.386Z,1520717982.386 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:39:42.773Z,1520717982.773 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:39:43.179Z,1520717983.179 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:39:43.578Z,1520717983.578 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:39:43.979Z,1520717983.979 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:39:44.387Z,1520717984.387 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:39:44.786Z,1520717984.786 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:39:45.187Z,1520717985.187 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:39:45.589Z,1520717985.589 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:39:45.980Z,1520717985.980 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:39:46.388Z,1520717986.388 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:39:46.824Z,1520717986.824 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:39:47.291Z,1520717987.291 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:39:47.684Z,1520717987.684 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:39:48.064Z,1520717988.064 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:39:48.463Z,1520717988.463 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:39:48.862Z,1520717988.862 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:39:49.275Z,1520717989.275 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:39:54.180Z,1520717994.180 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:39:54.392Z,1520717994.392 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:39:54.771Z,1520717994.771 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:39:55.142Z,1520717995.142 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:39:55.552Z,1520717995.552 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:39:55.995Z,1520717995.995 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:39:56.335Z,1520717996.335 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:39:56.742Z,1520717996.742 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:39:57.139Z,1520717997.139 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:39:57.542Z,1520717997.542 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:39:57.942Z,1520717997.942 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:39:58.356Z,1520717998.356 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:39:58.754Z,1520717998.754 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:39:59.134Z,1520717999.134 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:39:59.539Z,1520717999.539 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:39:59.933Z,1520717999.933 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:40:00.349Z,1520718000.349 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:40:00.752Z,1520718000.752 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:40:01.134Z,1520718001.134 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:40:01.541Z,1520718001.541 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:40:01.940Z,1520718001.940 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:40:02.355Z,1520718002.355 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:40:02.742Z,1520718002.742 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:40:03.141Z,1520718003.141 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:40:03.534Z,1520718003.534 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:40:03.938Z,1520718003.938 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:40:04.353Z,1520718004.353 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:40:04.768Z,1520718004.768 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:40:05.134Z,1520718005.134 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:40:05.548Z,1520718005.548 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:40:05.934Z,1520718005.934 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:40:06.334Z,1520718006.334 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:40:06.742Z,1520718006.742 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:40:07.141Z,1520718007.141 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:40:07.540Z,1520718007.540 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:40:07.934Z,1520718007.934 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:40:08.345Z,1520718008.345 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:40:08.747Z,1520718008.747 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:40:09.156Z,1520718009.156 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:40:09.574Z,1520718009.574 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:40:09.952Z,1520718009.952 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:40:10.367Z,1520718010.367 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:40:10.741Z,1520718010.741 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:40:11.189Z,1520718011.189 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:40:11.536Z,1520718011.536 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:40:11.934Z,1520718011.934 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:40:12.342Z,1520718012.342 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:40:12.742Z,1520718012.742 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:40:13.132Z,1520718013.132 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:40:13.549Z,1520718013.549 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:40:13.940Z,1520718013.940 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:40:14.334Z,1520718014.334 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:40:14.735Z,1520718014.735 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:40:15.153Z,1520718015.153 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:40:15.554Z,1520718015.554 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:40:15.950Z,1520718015.950 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:40:16.335Z,1520718016.335 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:40:16.734Z,1520718016.734 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:40:17.146Z,1520718017.146 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:40:17.541Z,1520718017.541 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:40:18.001Z,1520718018.001 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:40:18.340Z,1520718018.340 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:40:18.771Z,1520718018.770 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:40:19.193Z,1520718019.193 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:40:19.559Z,1520718019.559 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:40:19.936Z,1520718019.936 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:40:20.342Z,1520718020.342 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:40:20.742Z,1520718020.742 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:40:21.140Z,1520718021.140 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:40:21.534Z,1520718021.534 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:40:21.933Z,1520718021.933 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:40:22.335Z,1520718022.335 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:40:22.739Z,1520718022.739 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:40:23.134Z,1520718023.134 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:40:23.555Z,1520718023.555 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:40:23.946Z,1520718023.946 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:40:24.352Z,1520718024.352 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:40:24.735Z,1520718024.735 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:40:25.140Z,1520718025.140 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:40:25.533Z,1520718025.533 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:40:25.940Z,1520718025.940 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:40:26.373Z,1520718026.373 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:40:26.781Z,1520718026.781 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:40:27.174Z,1520718027.174 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:40:27.534Z,1520718027.534 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:40:27.941Z,1520718027.941 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:40:28.334Z,1520718028.334 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:40:28.741Z,1520718028.741 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:40:29.142Z,1520718029.142 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:40:29.535Z,1520718029.535 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:40:29.934Z,1520718029.934 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:40:30.335Z,1520718030.335 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:40:30.751Z,1520718030.751 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:40:31.141Z,1520718031.141 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:40:31.532Z,1520718031.532 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:40:31.940Z,1520718031.940 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:40:32.345Z,1520718032.345 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:40:32.742Z,1520718032.742 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:40:33.167Z,1520718033.167 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:40:33.534Z,1520718033.534 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:40:33.934Z,1520718033.934 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:40:34.339Z,1520718034.339 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:40:34.783Z,1520718034.783 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:40:35.133Z,1520718035.133 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:40:35.534Z,1520718035.534 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:40:35.939Z,1520718035.939 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:40:36.339Z,1520718036.339 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:40:36.734Z,1520718036.734 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:40:37.134Z,1520718037.134 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:40:37.539Z,1520718037.539 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:40:37.948Z,1520718037.948 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:40:38.341Z,1520718038.341 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:40:38.740Z,1520718038.740 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:40:39.155Z,1520718039.155 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:40:39.534Z,1520718039.534 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:40:39.934Z,1520718039.934 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:40:40.336Z,1520718040.336 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:40:40.788Z,1520718040.788 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:40:41.141Z,1520718041.141 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:40:41.535Z,1520718041.535 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:40:41.934Z,1520718041.934 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:40:42.335Z,1520718042.335 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:40:42.742Z,1520718042.742 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:40:43.142Z,1520718043.142 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:40:43.534Z,1520718043.534 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:40:43.940Z,1520718043.940 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:40:44.337Z,1520718044.337 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:40:44.732Z,1520718044.732 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:40:45.134Z,1520718045.134 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:40:45.535Z,1520718045.535 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:40:45.940Z,1520718045.940 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:40:46.341Z,1520718046.341 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:40:46.734Z,1520718046.734 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:40:47.135Z,1520718047.135 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:40:47.546Z,1520718047.546 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:40:47.942Z,1520718047.942 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:40:48.336Z,1520718048.336 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:40:48.734Z,1520718048.734 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:40:49.134Z,1520718049.134 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:40:49.530Z,1520718049.530 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:40:54.487Z,1520718054.487 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:40:54.631Z,1520718054.631 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:40:55.122Z,1520718055.122 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:40:55.435Z,1520718055.435 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:40:55.839Z,1520718055.839 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:40:56.222Z,1520718056.222 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:40:56.622Z,1520718056.622 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:40:57.029Z,1520718057.029 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:40:57.429Z,1520718057.429 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:40:57.822Z,1520718057.822 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:40:58.230Z,1520718058.230 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:40:58.628Z,1520718058.628 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:40:59.022Z,1520718059.022 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:40:59.423Z,1520718059.423 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:40:59.833Z,1520718059.833 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:41:00.229Z,1520718060.229 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:41:00.622Z,1520718060.622 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:41:01.031Z,1520718061.031 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:41:01.431Z,1520718061.431 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:41:01.827Z,1520718061.827 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:41:02.222Z,1520718062.222 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:41:02.624Z,1520718062.624 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:41:03.015Z,1520718063.015 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:41:03.434Z,1520718063.434 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:41:03.830Z,1520718063.830 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:41:04.240Z,1520718064.240 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:41:04.628Z,1520718064.628 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:41:05.022Z,1520718065.022 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:41:05.427Z,1520718065.427 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:41:05.822Z,1520718065.822 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:41:06.223Z,1520718066.223 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:41:06.627Z,1520718066.627 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:41:07.028Z,1520718067.028 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:41:07.422Z,1520718067.422 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:41:07.827Z,1520718067.827 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:41:08.237Z,1520718068.237 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:41:08.625Z,1520718068.625 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:41:09.023Z,1520718069.023 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:41:09.431Z,1520718069.431 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:41:09.848Z,1520718069.848 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:41:10.230Z,1520718070.230 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:41:10.622Z,1520718070.622 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:41:11.022Z,1520718071.022 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:41:11.429Z,1520718071.429 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:41:11.835Z,1520718071.835 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:41:12.230Z,1520718072.230 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:41:12.619Z,1520718072.619 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:41:13.038Z,1520718073.038 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:41:13.422Z,1520718073.422 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:41:13.817Z,1520718073.817 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:41:14.223Z,1520718074.223 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:41:14.630Z,1520718074.630 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:41:15.026Z,1520718075.026 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:41:15.438Z,1520718075.438 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:41:15.830Z,1520718075.830 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:41:16.223Z,1520718076.223 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:41:16.631Z,1520718076.631 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:41:17.039Z,1520718077.039 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:41:17.432Z,1520718077.432 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:41:17.831Z,1520718077.831 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:41:18.222Z,1520718078.222 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:41:18.628Z,1520718078.628 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:41:19.028Z,1520718079.028 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:41:19.428Z,1520718079.428 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:41:19.832Z,1520718079.832 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:41:20.231Z,1520718080.231 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:41:20.624Z,1520718080.624 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:41:21.031Z,1520718081.031 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:41:21.436Z,1520718081.436 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:41:21.830Z,1520718081.830 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:41:22.229Z,1520718082.229 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:41:22.636Z,1520718082.636 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:41:23.022Z,1520718083.022 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:41:23.422Z,1520718083.422 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:41:23.827Z,1520718083.827 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:41:24.236Z,1520718084.236 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:41:24.630Z,1520718084.630 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:41:25.040Z,1520718085.040 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:41:25.422Z,1520718085.422 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:41:25.816Z,1520718085.816 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:41:26.223Z,1520718086.223 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:41:26.627Z,1520718086.627 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:41:27.016Z,1520718087.016 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:41:27.436Z,1520718087.436 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:41:27.822Z,1520718087.822 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:41:28.222Z,1520718088.222 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:41:28.627Z,1520718088.627 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:41:29.037Z,1520718089.037 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:41:29.423Z,1520718089.423 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:41:29.843Z,1520718089.843 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:41:30.240Z,1520718090.240 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:41:30.622Z,1520718090.622 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:41:31.024Z,1520718091.024 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:41:31.435Z,1520718091.435 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:41:31.823Z,1520718091.823 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:41:32.234Z,1520718092.234 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:41:32.622Z,1520718092.622 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:41:33.022Z,1520718093.022 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:41:33.431Z,1520718093.431 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:41:33.842Z,1520718093.842 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:41:34.230Z,1520718094.230 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:41:34.624Z,1520718094.624 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:41:35.022Z,1520718095.022 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:41:35.422Z,1520718095.422 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:41:35.827Z,1520718095.827 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:41:36.237Z,1520718096.237 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:41:36.631Z,1520718096.631 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:41:37.024Z,1520718097.024 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:41:37.428Z,1520718097.428 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:41:37.820Z,1520718097.820 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:41:38.228Z,1520718098.228 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:41:38.642Z,1520718098.642 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:41:39.022Z,1520718099.022 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:41:39.423Z,1520718099.423 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:41:39.823Z,1520718099.823 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:41:40.226Z,1520718100.226 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:41:40.624Z,1520718100.624 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:41:41.031Z,1520718101.031 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:41:41.423Z,1520718101.423 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:41:41.823Z,1520718101.823 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:41:42.240Z,1520718102.240 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:41:42.632Z,1520718102.632 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:41:43.035Z,1520718103.035 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:41:43.430Z,1520718103.430 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:41:43.829Z,1520718103.829 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:41:44.236Z,1520718104.236 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:41:44.622Z,1520718104.622 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:41:45.022Z,1520718105.022 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:41:45.432Z,1520718105.432 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:41:45.828Z,1520718105.828 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:41:46.237Z,1520718106.237 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:41:46.622Z,1520718106.622 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:41:47.032Z,1520718107.032 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:41:47.430Z,1520718107.430 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:41:47.836Z,1520718107.836 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:41:48.222Z,1520718108.222 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:41:48.626Z,1520718108.626 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:41:49.033Z,1520718109.033 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:41:49.437Z,1520718109.437 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:41:49.832Z,1520718109.832 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:41:54.861Z,1520718114.861 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:41:55.030Z,1520718115.030 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:41:55.401Z,1520718115.401 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:41:55.778Z,1520718115.778 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:41:56.183Z,1520718116.183 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:41:56.578Z,1520718116.578 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:41:56.990Z,1520718116.990 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:41:57.392Z,1520718117.392 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:41:57.790Z,1520718117.790 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:41:58.178Z,1520718118.178 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:41:58.578Z,1520718118.578 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:41:58.988Z,1520718118.988 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:41:59.386Z,1520718119.386 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:41:59.786Z,1520718119.786 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:42:00.182Z,1520718120.182 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:42:00.578Z,1520718120.578 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:42:00.976Z,1520718120.976 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:42:01.384Z,1520718121.384 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:42:01.792Z,1520718121.792 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:42:02.180Z,1520718122.180 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:42:02.588Z,1520718122.588 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:42:02.978Z,1520718122.978 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:42:03.378Z,1520718123.378 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:42:03.783Z,1520718123.783 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:42:04.200Z,1520718124.200 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:42:04.578Z,1520718124.578 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:42:04.979Z,1520718124.979 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:42:05.380Z,1520718125.380 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:42:05.787Z,1520718125.787 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:42:06.199Z,1520718126.199 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:42:06.588Z,1520718126.588 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:42:06.978Z,1520718126.978 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:42:07.394Z,1520718127.394 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:42:07.798Z,1520718127.798 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:42:08.178Z,1520718128.178 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:42:08.592Z,1520718128.592 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:42:08.979Z,1520718128.979 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:42:09.378Z,1520718129.378 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:42:09.779Z,1520718129.779 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:42:10.186Z,1520718130.186 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:42:10.578Z,1520718130.578 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:42:10.993Z,1520718130.993 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:42:11.380Z,1520718131.380 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:42:11.778Z,1520718131.778 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:42:12.178Z,1520718132.178 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:42:12.578Z,1520718132.578 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:42:12.979Z,1520718132.979 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:42:13.392Z,1520718133.392 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:42:13.791Z,1520718133.791 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:42:14.198Z,1520718134.198 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:42:14.578Z,1520718134.578 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:42:14.979Z,1520718134.979 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:42:15.378Z,1520718135.378 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:42:15.784Z,1520718135.784 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:42:16.205Z,1520718136.205 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:42:16.582Z,1520718136.582 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:42:16.987Z,1520718136.987 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:42:17.386Z,1520718137.386 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:42:17.786Z,1520718137.786 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:42:18.179Z,1520718138.179 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:42:18.596Z,1520718138.596 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:42:18.979Z,1520718138.979 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:42:19.388Z,1520718139.388 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:42:19.796Z,1520718139.796 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:42:20.186Z,1520718140.186 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:42:20.596Z,1520718140.596 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:42:20.623Z,1520718140.623 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T21:42:20.623Z,1520718140.623 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 2
2018-03-10T21:42:20.623Z,1520718140.623 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-10T21:42:20.676Z,1520718140.676 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-10T21:42:20.988Z,1520718140.988 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:42:21.072Z,1520718141.072 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-10T21:42:21.072Z,1520718141.072 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 2
2018-03-10T21:42:21.385Z,1520718141.385 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:42:21.416Z,1520718141.416 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-10T21:42:21.417Z,1520718141.417 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-10T21:42:21.417Z,1520718141.417 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-10T21:42:21.784Z,1520718141.784 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:42:22.195Z,1520718142.195 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:42:22.588Z,1520718142.588 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:42:22.992Z,1520718142.992 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:42:23.388Z,1520718143.388 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:42:23.789Z,1520718143.789 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:42:24.195Z,1520718144.195 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:42:24.588Z,1520718144.588 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:42:24.979Z,1520718144.979 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:42:25.378Z,1520718145.378 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:42:25.775Z,1520718145.775 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:42:26.193Z,1520718146.193 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:42:26.589Z,1520718146.589 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:42:26.980Z,1520718146.980 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:42:27.404Z,1520718147.404 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:42:27.796Z,1520718147.796 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:42:28.176Z,1520718148.176 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:42:28.586Z,1520718148.586 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:42:28.985Z,1520718148.985 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:42:29.387Z,1520718149.387 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:42:29.787Z,1520718149.787 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:42:30.192Z,1520718150.192 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:42:30.578Z,1520718150.578 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:42:30.978Z,1520718150.978 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:42:31.383Z,1520718151.383 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:42:31.793Z,1520718151.793 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:42:32.178Z,1520718152.178 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:42:32.578Z,1520718152.578 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:42:32.978Z,1520718152.978 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:42:33.380Z,1520718153.380 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:42:33.786Z,1520718153.786 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:42:34.186Z,1520718154.186 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:42:34.585Z,1520718154.585 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:42:34.998Z,1520718154.998 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:42:35.384Z,1520718155.384 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:42:35.778Z,1520718155.778 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:42:36.178Z,1520718156.178 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:42:36.578Z,1520718156.578 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:42:36.984Z,1520718156.984 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:42:37.390Z,1520718157.390 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:42:37.786Z,1520718157.786 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:42:38.198Z,1520718158.198 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:42:38.579Z,1520718158.579 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:42:38.983Z,1520718158.983 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:42:39.378Z,1520718159.378 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:42:39.788Z,1520718159.788 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:42:40.184Z,1520718160.184 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:42:40.592Z,1520718160.592 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:42:40.601Z,1520718160.601 [BPC1](ERROR): Failed to receive battery data
2018-03-10T21:42:40.601Z,1520718160.601 [BPC1] Communications Fault, FailCount= 1
2018-03-10T21:42:40.601Z,1520718160.601 [BPC1](ERROR): Communications Fault
2018-03-10T21:42:40.718Z,1520718160.718 [CBIT](ERROR): Communications Fault in component: BPC1
2018-03-10T21:42:40.981Z,1520718160.981 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:42:41.378Z,1520718161.378 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:42:41.780Z,1520718161.780 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:42:41.859Z,1520718161.859 [CBIT](INFO): Clearing failed state for component BPC1
2018-03-10T21:42:41.859Z,1520718161.859 [BPC1] No Fault, FailCount= 1
2018-03-10T21:42:42.187Z,1520718162.187 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:42:42.593Z,1520718162.593 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:42:42.984Z,1520718162.984 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:42:43.378Z,1520718163.378 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:42:43.778Z,1520718163.778 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:42:44.188Z,1520718164.188 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:42:44.588Z,1520718164.588 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:42:44.982Z,1520718164.982 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:42:45.386Z,1520718165.386 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:42:45.788Z,1520718165.788 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:42:46.186Z,1520718166.186 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:42:46.587Z,1520718166.587 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:42:46.984Z,1520718166.984 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:42:47.378Z,1520718167.378 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:42:47.792Z,1520718167.792 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:42:48.202Z,1520718168.202 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:42:48.578Z,1520718168.578 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:42:48.979Z,1520718168.979 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:42:49.384Z,1520718169.384 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:42:49.778Z,1520718169.778 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:42:50.188Z,1520718170.188 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:42:55.238Z,1520718175.238 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:42:55.390Z,1520718175.390 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:42:55.769Z,1520718175.769 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:42:56.168Z,1520718176.168 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:42:56.579Z,1520718176.579 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:42:56.962Z,1520718176.962 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:42:57.362Z,1520718177.362 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:42:57.771Z,1520718177.771 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:42:58.172Z,1520718178.172 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:42:58.568Z,1520718178.568 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:42:58.972Z,1520718178.972 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:42:59.362Z,1520718179.362 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:42:59.762Z,1520718179.762 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:43:00.175Z,1520718180.175 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:43:00.570Z,1520718180.570 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:43:00.960Z,1520718180.960 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:43:01.375Z,1520718181.375 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:43:01.784Z,1520718181.784 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:43:02.156Z,1520718182.156 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:43:02.562Z,1520718182.562 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:43:02.967Z,1520718182.967 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:43:03.373Z,1520718183.373 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:43:03.770Z,1520718183.770 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:43:04.181Z,1520718184.181 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:43:04.560Z,1520718184.560 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:43:04.966Z,1520718184.966 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:43:05.370Z,1520718185.370 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:43:05.778Z,1520718185.778 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:43:06.170Z,1520718186.170 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:43:06.576Z,1520718186.576 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:43:06.962Z,1520718186.962 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:43:07.362Z,1520718187.362 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:43:07.772Z,1520718187.772 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:43:08.172Z,1520718188.172 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:43:08.575Z,1520718188.575 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:43:08.962Z,1520718188.962 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:43:09.360Z,1520718189.360 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:43:09.768Z,1520718189.768 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:43:10.171Z,1520718190.171 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:43:10.570Z,1520718190.570 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:43:10.970Z,1520718190.970 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:43:11.375Z,1520718191.375 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:43:11.762Z,1520718191.762 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:43:12.172Z,1520718192.172 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:43:12.572Z,1520718192.572 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:43:12.581Z,1520718192.581 [BPC1](FAULT): Failed to initialize
2018-03-10T21:43:12.581Z,1520718192.581 [BPC1] Communications Fault, FailCount= 2
2018-03-10T21:43:12.581Z,1520718192.581 [BPC1](ERROR): Communications Fault
2018-03-10T21:43:12.652Z,1520718192.652 [CBIT](ERROR): Communications Fault in component: BPC1
2018-03-10T21:43:12.963Z,1520718192.963 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:43:13.368Z,1520718193.368 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:43:13.779Z,1520718193.779 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:43:13.870Z,1520718193.870 [CBIT](INFO): Clearing failed state for component BPC1
2018-03-10T21:43:13.871Z,1520718193.871 [BPC1] No Fault, FailCount= 2
2018-03-10T21:43:14.160Z,1520718194.160 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:43:14.574Z,1520718194.574 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:43:14.974Z,1520718194.974 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:43:15.360Z,1520718195.360 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:43:15.763Z,1520718195.763 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:43:16.168Z,1520718196.168 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:43:16.566Z,1520718196.566 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:43:16.975Z,1520718196.975 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:43:17.365Z,1520718197.365 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:43:17.762Z,1520718197.762 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:43:18.168Z,1520718198.168 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:43:18.577Z,1520718198.577 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:43:18.978Z,1520718198.978 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:43:19.363Z,1520718199.363 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:43:19.762Z,1520718199.762 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:43:20.162Z,1520718200.162 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:43:20.568Z,1520718200.568 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:43:20.966Z,1520718200.966 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:43:21.368Z,1520718201.368 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:43:21.776Z,1520718201.776 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:43:22.169Z,1520718202.169 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:43:22.571Z,1520718202.571 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:43:22.963Z,1520718202.963 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:43:23.362Z,1520718203.362 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:43:23.762Z,1520718203.762 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:43:24.170Z,1520718204.170 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:43:24.576Z,1520718204.576 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:43:24.973Z,1520718204.973 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:43:25.372Z,1520718205.372 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:43:25.768Z,1520718205.768 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:43:26.163Z,1520718206.163 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:43:26.564Z,1520718206.564 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:43:26.972Z,1520718206.972 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:43:27.372Z,1520718207.372 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:43:27.764Z,1520718207.764 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:43:28.168Z,1520718208.168 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:43:28.562Z,1520718208.562 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:43:28.965Z,1520718208.965 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:43:29.362Z,1520718209.362 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:43:29.762Z,1520718209.762 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:43:30.167Z,1520718210.167 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:43:30.576Z,1520718210.576 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:43:30.972Z,1520718210.972 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:43:31.360Z,1520718211.360 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:43:31.762Z,1520718211.762 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:43:32.162Z,1520718212.162 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:43:32.560Z,1520718212.560 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:43:32.971Z,1520718212.971 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:43:33.369Z,1520718213.369 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:43:33.780Z,1520718213.780 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:43:34.163Z,1520718214.163 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:43:34.562Z,1520718214.562 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:43:34.956Z,1520718214.956 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:43:35.366Z,1520718215.366 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:43:35.767Z,1520718215.767 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:43:36.168Z,1520718216.168 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:43:36.575Z,1520718216.575 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:43:36.979Z,1520718216.979 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:43:37.362Z,1520718217.362 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:43:37.767Z,1520718217.767 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:43:38.176Z,1520718218.176 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:43:38.572Z,1520718218.572 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:43:38.980Z,1520718218.980 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:43:39.362Z,1520718219.362 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:43:39.760Z,1520718219.760 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:43:40.171Z,1520718220.171 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:43:40.570Z,1520718220.570 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:43:40.960Z,1520718220.960 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:43:41.365Z,1520718221.365 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:43:41.762Z,1520718221.762 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:43:42.156Z,1520718222.156 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:43:42.568Z,1520718222.568 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:43:42.966Z,1520718222.966 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:43:43.373Z,1520718223.373 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:43:43.769Z,1520718223.769 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:43:44.171Z,1520718224.171 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:43:44.563Z,1520718224.563 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:43:44.589Z,1520718224.589 [BPC1](FAULT): Failed to initialize
2018-03-10T21:43:44.589Z,1520718224.589 [BPC1] Communications Fault, FailCount= 3
2018-03-10T21:43:44.589Z,1520718224.589 [BPC1](ERROR): Communications Fault
2018-03-10T21:43:44.682Z,1520718224.682 [CBIT](ERROR): Communications Fault in component: BPC1
2018-03-10T21:43:44.983Z,1520718224.983 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:43:45.363Z,1520718225.363 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:43:45.760Z,1520718225.760 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:43:45.855Z,1520718225.855 [CBIT](INFO): Clearing failed state for component BPC1
2018-03-10T21:43:45.855Z,1520718225.855 [BPC1] No Fault, FailCount= 3
2018-03-10T21:43:46.172Z,1520718226.172 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:43:46.567Z,1520718226.567 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:43:46.971Z,1520718226.971 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:43:47.374Z,1520718227.374 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:43:47.770Z,1520718227.770 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:43:48.168Z,1520718228.168 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:43:48.562Z,1520718228.562 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:43:48.963Z,1520718228.963 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:43:48.999Z,1520718228.999 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-03-10T21:43:48.999Z,1520718228.999 [Default:CheckIn:C.Wait] Stopped
2018-03-10T21:43:48.999Z,1520718228.999 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-03-10T21:43:48.999Z,1520718228.999 [Default:CheckIn:D] Running Loop=1
2018-03-10T21:43:49.360Z,1520718229.360 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:43:49.409Z,1520718229.409 [Default:CheckIn:D] Stopped
2018-03-10T21:43:49.409Z,1520718229.409 [Default:CheckIn:E] Running Loop=1
2018-03-10T21:43:49.772Z,1520718229.772 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:43:49.832Z,1520718229.832 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 984.524805 min 
2018-03-10T21:43:49.832Z,1520718229.832 [Default:CheckIn:E] Stopped
2018-03-10T21:43:49.832Z,1520718229.832 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-03-10T21:43:49.832Z,1520718229.832 [Default:CheckIn] Stopped
2018-03-10T21:43:49.833Z,1520718229.833 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-03-10T21:43:49.833Z,1520718229.833 [Default:CheckIn](INFO): Running loop #98
2018-03-10T21:43:49.833Z,1520718229.833 [Default:CheckIn] Running Loop=98
2018-03-10T21:43:49.833Z,1520718229.833 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-03-10T21:43:49.833Z,1520718229.833 [Default:CheckIn:Read_GPS] Running Loop=1
2018-03-10T21:43:50.171Z,1520718230.171 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:43:50.544Z,1520718230.544 [NAL9602](INFO): Powering up
2018-03-10T21:43:50.569Z,1520718230.569 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:43:50.980Z,1520718230.980 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:43:51.362Z,1520718231.362 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:43:51.762Z,1520718231.762 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:43:52.168Z,1520718232.168 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:43:57.024Z,1520718237.024 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:43:57.161Z,1520718237.161 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:43:57.612Z,1520718237.612 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:43:57.960Z,1520718237.960 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:43:58.364Z,1520718238.364 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:43:58.742Z,1520718238.742 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:43:59.142Z,1520718239.142 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:43:59.556Z,1520718239.556 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:43:59.994Z,1520718239.994 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:44:00.336Z,1520718240.336 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:44:00.743Z,1520718240.743 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:44:01.187Z,1520718241.187 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:44:01.522Z,1520718241.522 [NAL9602](INFO): NAL9602 initialized
2018-03-10T21:44:01.540Z,1520718241.540 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:44:01.962Z,1520718241.962 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:44:02.376Z,1520718242.376 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:44:02.764Z,1520718242.764 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:44:03.173Z,1520718243.173 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:44:03.543Z,1520718243.543 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:44:03.952Z,1520718243.952 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:44:04.359Z,1520718244.359 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:44:04.766Z,1520718244.766 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:44:05.160Z,1520718245.160 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:44:05.583Z,1520718245.583 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:44:05.960Z,1520718245.960 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:44:06.366Z,1520718246.366 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:44:06.774Z,1520718246.774 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:44:07.178Z,1520718247.178 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:44:07.596Z,1520718247.596 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:44:07.983Z,1520718247.983 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:44:08.364Z,1520718248.364 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:44:08.780Z,1520718248.780 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:44:09.186Z,1520718249.186 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:44:09.572Z,1520718249.572 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:44:09.968Z,1520718249.968 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:44:10.368Z,1520718250.368 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:44:10.774Z,1520718250.774 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:44:11.160Z,1520718251.160 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:44:11.547Z,1520718251.547 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:44:11.950Z,1520718251.950 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:44:12.354Z,1520718252.354 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:44:12.742Z,1520718252.742 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:44:13.184Z,1520718253.184 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:44:13.593Z,1520718253.593 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:44:13.977Z,1520718253.977 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:44:14.389Z,1520718254.389 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:44:14.787Z,1520718254.787 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:44:15.200Z,1520718255.200 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:44:15.560Z,1520718255.560 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:44:15.990Z,1520718255.990 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:44:16.362Z,1520718256.362 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:44:16.371Z,1520718256.371 [BPC1](FAULT): Failed to initialize
2018-03-10T21:44:16.371Z,1520718256.371 [BPC1] Communications Fault, FailCount= 4
2018-03-10T21:44:16.371Z,1520718256.371 [BPC1](ERROR): Communications Fault
2018-03-10T21:44:16.488Z,1520718256.488 [CBIT](ERROR): Communications Fault in component: BPC1
2018-03-10T21:44:16.773Z,1520718256.773 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:44:17.169Z,1520718257.169 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:44:17.562Z,1520718257.562 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:44:17.653Z,1520718257.653 [CBIT](INFO): Clearing failed state for component BPC1
2018-03-10T21:44:17.653Z,1520718257.653 [BPC1] No Fault, FailCount= 4
2018-03-10T21:44:17.942Z,1520718257.942 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:44:18.343Z,1520718258.343 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:44:18.740Z,1520718258.740 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:44:19.165Z,1520718259.165 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:44:19.560Z,1520718259.560 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:44:19.942Z,1520718259.942 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:44:20.342Z,1520718260.342 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:44:20.743Z,1520718260.743 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:44:21.148Z,1520718261.148 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:44:21.586Z,1520718261.586 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:44:21.964Z,1520718261.964 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:44:22.381Z,1520718262.381 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:44:22.742Z,1520718262.742 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:44:23.179Z,1520718263.179 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:44:23.592Z,1520718263.592 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:44:23.984Z,1520718263.984 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:44:24.343Z,1520718264.343 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:44:24.785Z,1520718264.785 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:44:25.191Z,1520718265.191 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:44:25.552Z,1520718265.552 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:44:25.965Z,1520718265.965 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:44:26.361Z,1520718266.361 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:44:26.752Z,1520718266.752 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:44:27.159Z,1520718267.159 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:44:27.560Z,1520718267.560 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:44:27.943Z,1520718267.943 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:44:28.346Z,1520718268.346 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:44:28.767Z,1520718268.767 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:44:29.167Z,1520718269.167 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:44:29.559Z,1520718269.559 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:44:29.983Z,1520718269.983 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:44:30.369Z,1520718270.369 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:44:30.742Z,1520718270.742 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:44:31.178Z,1520718271.178 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:44:31.573Z,1520718271.573 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:44:31.942Z,1520718271.942 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:44:32.385Z,1520718272.385 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:44:32.766Z,1520718272.766 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:44:33.167Z,1520718273.167 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:44:33.589Z,1520718273.589 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:44:33.961Z,1520718273.961 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:44:34.376Z,1520718274.376 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:44:34.757Z,1520718274.757 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:44:35.146Z,1520718275.146 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:44:35.556Z,1520718275.556 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:44:35.964Z,1520718275.964 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:44:36.357Z,1520718276.357 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:44:36.742Z,1520718276.742 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:44:37.145Z,1520718277.145 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:44:37.549Z,1520718277.549 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:44:37.999Z,1520718277.999 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:44:38.376Z,1520718278.376 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:44:38.783Z,1520718278.783 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:44:39.183Z,1520718279.183 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:44:39.605Z,1520718279.605 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:44:39.954Z,1520718279.954 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:44:40.399Z,1520718280.399 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:44:40.776Z,1520718280.776 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:44:41.189Z,1520718281.189 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:44:41.542Z,1520718281.542 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:44:41.963Z,1520718281.963 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:44:42.343Z,1520718282.343 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:44:42.751Z,1520718282.751 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:44:43.172Z,1520718283.172 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:44:43.566Z,1520718283.566 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:44:43.967Z,1520718283.967 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:44:44.360Z,1520718284.360 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:44:44.742Z,1520718284.742 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:44:45.148Z,1520718285.148 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:44:45.590Z,1520718285.590 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:44:45.973Z,1520718285.973 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:44:46.342Z,1520718286.342 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:44:46.781Z,1520718286.781 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:44:47.197Z,1520718287.197 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:44:47.556Z,1520718287.556 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:44:47.997Z,1520718287.997 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:44:48.384Z,1520718288.384 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:44:48.793Z,1520718288.793 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:44:49.172Z,1520718289.172 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:44:49.570Z,1520718289.570 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:44:49.954Z,1520718289.954 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:44:50.364Z,1520718290.364 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:44:50.742Z,1520718290.742 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:44:55.785Z,1520718295.785 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:44:56.005Z,1520718296.005 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:44:56.378Z,1520718296.378 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:44:56.770Z,1520718296.770 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:44:57.151Z,1520718297.151 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:44:57.558Z,1520718297.558 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:44:57.939Z,1520718297.939 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:44:58.339Z,1520718298.339 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:44:58.746Z,1520718298.746 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:44:59.146Z,1520718299.146 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:44:59.539Z,1520718299.539 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:44:59.938Z,1520718299.938 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:45:00.342Z,1520718300.342 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:45:00.781Z,1520718300.781 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:45:01.165Z,1520718301.165 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:45:01.586Z,1520718301.586 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:45:02.006Z,1520718302.006 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:45:02.338Z,1520718302.338 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:45:02.762Z,1520718302.762 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:45:03.139Z,1520718303.139 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:45:03.585Z,1520718303.585 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:45:03.953Z,1520718303.953 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:45:04.360Z,1520718304.360 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:45:04.747Z,1520718304.747 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:45:05.160Z,1520718305.160 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:45:05.540Z,1520718305.540 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:45:05.960Z,1520718305.960 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:45:06.368Z,1520718306.368 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:45:06.760Z,1520718306.760 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:45:07.158Z,1520718307.158 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:45:07.592Z,1520718307.592 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:45:07.968Z,1520718307.968 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:45:08.339Z,1520718308.339 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:45:08.760Z,1520718308.760 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:45:09.176Z,1520718309.176 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:45:09.538Z,1520718309.538 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:45:09.945Z,1520718309.945 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:45:10.358Z,1520718310.358 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:45:10.804Z,1520718310.804 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:45:11.198Z,1520718311.198 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:45:11.558Z,1520718311.558 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:45:11.968Z,1520718311.968 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:45:12.371Z,1520718312.371 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:45:12.747Z,1520718312.747 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:45:13.164Z,1520718313.164 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:45:13.561Z,1520718313.561 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:45:13.956Z,1520718313.956 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:45:14.339Z,1520718314.339 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:45:14.745Z,1520718314.745 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:45:15.140Z,1520718315.140 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:45:15.597Z,1520718315.597 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:45:15.959Z,1520718315.959 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:45:16.385Z,1520718316.385 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:45:16.783Z,1520718316.783 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:45:17.187Z,1520718317.187 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:45:17.563Z,1520718317.563 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:45:17.939Z,1520718317.939 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:45:18.338Z,1520718318.338 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:45:18.739Z,1520718318.739 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:45:19.180Z,1520718319.180 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:45:19.567Z,1520718319.567 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:45:19.939Z,1520718319.939 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:45:20.340Z,1520718320.340 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:45:20.760Z,1520718320.760 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:45:21.173Z,1520718321.173 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:45:21.561Z,1520718321.561 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:45:21.594Z,1520718321.594 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T21:45:21.594Z,1520718321.594 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 3
2018-03-10T21:45:21.594Z,1520718321.594 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-10T21:45:21.646Z,1520718321.646 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-10T21:45:21.960Z,1520718321.960 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:45:22.045Z,1520718322.045 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-10T21:45:22.045Z,1520718322.045 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 3
2018-03-10T21:45:22.360Z,1520718322.360 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:45:22.402Z,1520718322.402 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-10T21:45:22.402Z,1520718322.402 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-10T21:45:22.403Z,1520718322.403 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-10T21:45:22.755Z,1520718322.755 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:45:23.133Z,1520718323.133 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:45:23.540Z,1520718323.540 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:45:23.962Z,1520718323.962 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:45:24.343Z,1520718324.343 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:45:24.739Z,1520718324.739 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:45:25.144Z,1520718325.144 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:45:25.593Z,1520718325.593 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:45:25.971Z,1520718325.971 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:45:26.367Z,1520718326.367 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:45:26.785Z,1520718326.785 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:45:27.189Z,1520718327.189 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:45:27.554Z,1520718327.554 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:45:27.972Z,1520718327.972 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:45:28.339Z,1520718328.339 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:45:28.747Z,1520718328.747 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:45:29.174Z,1520718329.174 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:45:29.568Z,1520718329.568 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:45:29.953Z,1520718329.953 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:45:30.350Z,1520718330.350 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:45:30.755Z,1520718330.755 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:45:31.141Z,1520718331.141 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:45:31.585Z,1520718331.585 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:45:31.988Z,1520718331.988 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:45:32.383Z,1520718332.383 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:45:32.763Z,1520718332.763 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:45:33.181Z,1520718333.181 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:45:33.582Z,1520718333.582 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:45:33.939Z,1520718333.939 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:45:34.395Z,1520718334.395 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:45:34.759Z,1520718334.759 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:45:35.139Z,1520718335.139 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:45:35.539Z,1520718335.539 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:45:35.961Z,1520718335.961 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:45:36.339Z,1520718336.339 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:45:36.751Z,1520718336.751 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:45:37.160Z,1520718337.160 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:45:37.572Z,1520718337.572 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:45:37.968Z,1520718337.968 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:45:38.353Z,1520718338.353 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:45:38.745Z,1520718338.745 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:45:39.150Z,1520718339.150 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:45:39.552Z,1520718339.552 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:45:39.938Z,1520718339.938 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:45:40.360Z,1520718340.360 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:45:40.769Z,1520718340.769 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:45:41.139Z,1520718341.139 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:45:41.542Z,1520718341.542 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:45:41.954Z,1520718341.954 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:45:42.405Z,1520718342.405 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:45:42.777Z,1520718342.777 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:45:43.183Z,1520718343.183 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:45:43.553Z,1520718343.553 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:45:43.961Z,1520718343.961 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:45:44.354Z,1520718344.354 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:45:44.736Z,1520718344.736 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:45:45.139Z,1520718345.139 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:45:45.539Z,1520718345.539 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:45:45.943Z,1520718345.943 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:45:46.362Z,1520718346.362 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:45:46.757Z,1520718346.757 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:45:47.133Z,1520718347.133 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:45:47.539Z,1520718347.539 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:45:47.960Z,1520718347.960 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:45:48.356Z,1520718348.356 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:45:48.779Z,1520718348.779 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:45:49.202Z,1520718349.202 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:45:49.555Z,1520718349.555 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:45:49.975Z,1520718349.975 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:45:50.339Z,1520718350.339 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:45:50.739Z,1520718350.739 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:45:51.139Z,1520718351.139 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:45:56.088Z,1520718356.088 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:45:56.235Z,1520718356.235 [CBIT](DEBUG): EFC running - data check-sum false
2018-03-10T21:45:56.307Z,1520718356.307 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:45:56.672Z,1520718356.672 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:45:57.074Z,1520718357.074 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:45:57.476Z,1520718357.476 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:45:57.875Z,1520718357.875 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:45:58.276Z,1520718358.276 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:45:58.676Z,1520718358.676 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:45:59.082Z,1520718359.082 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:45:59.485Z,1520718359.485 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:45:59.876Z,1520718359.876 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:46:00.278Z,1520718360.278 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:46:00.677Z,1520718360.677 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:46:01.080Z,1520718361.080 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:46:01.471Z,1520718361.471 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:46:01.871Z,1520718361.871 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:46:02.276Z,1520718362.276 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:46:02.684Z,1520718362.684 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:46:03.070Z,1520718363.070 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:46:03.489Z,1520718363.489 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:46:03.886Z,1520718363.886 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:46:04.289Z,1520718364.289 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:46:04.694Z,1520718364.694 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:46:05.079Z,1520718365.079 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:46:05.475Z,1520718365.475 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:46:05.880Z,1520718365.880 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:46:06.284Z,1520718366.284 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:46:06.670Z,1520718366.670 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:46:07.076Z,1520718367.076 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:46:07.483Z,1520718367.483 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:46:07.870Z,1520718367.870 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:46:08.290Z,1520718368.290 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:46:08.682Z,1520718368.682 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:46:09.081Z,1520718369.081 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:46:09.486Z,1520718369.486 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:46:09.879Z,1520718369.879 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:46:10.279Z,1520718370.279 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:46:10.682Z,1520718370.682 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:46:11.088Z,1520718371.088 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:46:11.485Z,1520718371.485 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:46:11.871Z,1520718371.871 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:46:12.275Z,1520718372.275 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:46:12.683Z,1520718372.683 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:46:13.079Z,1520718373.079 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:46:13.494Z,1520718373.494 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:46:13.885Z,1520718373.885 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:46:14.294Z,1520718374.294 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:46:14.688Z,1520718374.688 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:46:15.076Z,1520718375.076 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:46:15.476Z,1520718375.476 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:46:15.880Z,1520718375.880 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:46:16.277Z,1520718376.277 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:46:16.680Z,1520718376.680 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:46:17.082Z,1520718377.082 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:46:17.488Z,1520718377.488 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:46:17.875Z,1520718377.875 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:46:18.270Z,1520718378.270 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:46:18.690Z,1520718378.690 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:46:19.088Z,1520718379.088 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:46:19.499Z,1520718379.499 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:46:19.886Z,1520718379.886 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:46:20.271Z,1520718380.271 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:46:20.676Z,1520718380.676 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:46:21.071Z,1520718381.071 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:46:21.484Z,1520718381.484 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:46:21.880Z,1520718381.880 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:46:22.279Z,1520718382.279 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:46:22.672Z,1520718382.672 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:46:23.083Z,1520718383.083 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:46:23.498Z,1520718383.498 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:46:23.891Z,1520718383.891 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:46:24.286Z,1520718384.286 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:46:24.685Z,1520718384.685 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:46:25.093Z,1520718385.093 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:46:25.492Z,1520718385.492 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:46:25.882Z,1520718385.882 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:46:26.271Z,1520718386.271 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:46:26.674Z,1520718386.674 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:46:27.080Z,1520718387.080 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:46:27.476Z,1520718387.476 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:46:27.877Z,1520718387.877 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:46:28.284Z,1520718388.284 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:46:28.671Z,1520718388.671 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:46:29.086Z,1520718389.086 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:46:29.492Z,1520718389.492 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:46:29.891Z,1520718389.891 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:46:30.293Z,1520718390.293 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:46:30.685Z,1520718390.685 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:46:31.079Z,1520718391.079 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:46:31.489Z,1520718391.489 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:46:31.881Z,1520718391.881 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:46:32.265Z,1520718392.265 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:46:32.671Z,1520718392.671 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:46:33.070Z,1520718393.070 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:46:33.465Z,1520718393.465 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:46:33.871Z,1520718393.871 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:46:34.298Z,1520718394.298 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:46:34.690Z,1520718394.690 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:46:35.077Z,1520718395.077 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:46:35.484Z,1520718395.484 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:46:35.879Z,1520718395.879 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:46:36.281Z,1520718396.281 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:46:36.680Z,1520718396.680 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:46:37.100Z,1520718397.100 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:46:37.490Z,1520718397.490 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:46:37.876Z,1520718397.876 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:46:38.274Z,1520718398.274 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:46:38.680Z,1520718398.680 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:46:39.085Z,1520718399.085 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:46:39.479Z,1520718399.479 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:46:39.884Z,1520718399.884 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:46:40.286Z,1520718400.286 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:46:40.678Z,1520718400.678 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:46:41.070Z,1520718401.070 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:46:41.485Z,1520718401.485 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:46:41.876Z,1520718401.876 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:46:42.284Z,1520718402.284 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:46:42.685Z,1520718402.685 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:46:43.071Z,1520718403.071 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:46:43.476Z,1520718403.476 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:46:43.880Z,1520718403.880 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:46:44.280Z,1520718404.280 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:46:44.681Z,1520718404.681 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:46:45.071Z,1520718405.071 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:46:45.469Z,1520718405.469 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:46:45.889Z,1520718405.889 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:46:46.295Z,1520718406.295 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:46:46.682Z,1520718406.682 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:46:47.083Z,1520718407.083 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:46:47.481Z,1520718407.481 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:46:47.882Z,1520718407.882 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:46:48.274Z,1520718408.274 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:46:48.680Z,1520718408.680 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:46:49.077Z,1520718409.077 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:46:49.480Z,1520718409.480 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:46:49.892Z,1520718409.892 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:46:50.283Z,1520718410.283 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:46:50.688Z,1520718410.688 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:46:51.084Z,1520718411.084 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:46:51.475Z,1520718411.475 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:46:56.375Z,1520718416.375 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:46:56.602Z,1520718416.602 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:46:56.959Z,1520718416.959 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:46:57.379Z,1520718417.379 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:46:57.767Z,1520718417.767 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:46:58.171Z,1520718418.171 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:46:58.568Z,1520718418.568 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:46:58.977Z,1520718418.977 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:46:59.379Z,1520718419.379 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:46:59.758Z,1520718419.758 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:47:00.157Z,1520718420.157 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:47:00.559Z,1520718420.559 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:47:00.964Z,1520718420.964 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:47:01.374Z,1520718421.374 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:47:01.768Z,1520718421.768 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:47:02.166Z,1520718422.166 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:47:02.570Z,1520718422.570 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:47:02.977Z,1520718422.977 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:47:03.373Z,1520718423.373 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:47:03.759Z,1520718423.759 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:47:04.179Z,1520718424.179 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:47:04.564Z,1520718424.564 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:47:04.966Z,1520718424.966 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:47:05.364Z,1520718425.364 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:47:05.772Z,1520718425.772 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:47:06.178Z,1520718426.178 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:47:06.571Z,1520718426.571 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:47:06.958Z,1520718426.958 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:47:07.370Z,1520718427.370 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:47:07.785Z,1520718427.785 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:47:08.168Z,1520718428.168 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:47:08.572Z,1520718428.572 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:47:08.987Z,1520718428.987 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:47:09.372Z,1520718429.372 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:47:09.766Z,1520718429.766 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:47:10.168Z,1520718430.168 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:47:10.564Z,1520718430.564 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:47:10.959Z,1520718430.959 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:47:11.359Z,1520718431.359 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:47:11.764Z,1520718431.764 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:47:12.156Z,1520718432.156 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:47:12.567Z,1520718432.567 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:47:12.972Z,1520718432.972 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:47:13.365Z,1520718433.365 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:47:13.767Z,1520718433.767 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:47:14.159Z,1520718434.159 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:47:14.557Z,1520718434.557 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:47:14.964Z,1520718434.964 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:47:15.369Z,1520718435.369 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:47:15.765Z,1520718435.765 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:47:16.179Z,1520718436.179 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:47:16.584Z,1520718436.584 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:47:16.959Z,1520718436.959 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:47:17.364Z,1520718437.364 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:47:17.768Z,1520718437.768 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:47:18.167Z,1520718438.167 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:47:18.569Z,1520718438.569 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:47:18.972Z,1520718438.972 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:47:19.370Z,1520718439.370 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:47:19.759Z,1520718439.759 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:47:20.168Z,1520718440.168 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:47:20.579Z,1520718440.579 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:47:20.977Z,1520718440.977 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:47:21.367Z,1520718441.367 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:47:21.759Z,1520718441.759 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:47:22.172Z,1520718442.172 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:47:22.567Z,1520718442.567 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:47:22.972Z,1520718442.972 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:47:23.375Z,1520718443.375 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:47:23.767Z,1520718443.767 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:47:24.160Z,1520718444.160 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:47:24.577Z,1520718444.577 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:47:24.978Z,1520718444.978 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:47:25.363Z,1520718445.363 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:47:25.768Z,1520718445.768 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:47:26.159Z,1520718446.159 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:47:26.558Z,1520718446.558 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:47:26.964Z,1520718446.964 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:47:27.368Z,1520718447.368 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:47:27.774Z,1520718447.774 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:47:28.168Z,1520718448.168 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:47:28.577Z,1520718448.577 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:47:28.976Z,1520718448.976 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:47:29.386Z,1520718449.386 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:47:29.769Z,1520718449.769 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:47:30.164Z,1520718450.164 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:47:30.567Z,1520718450.567 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:47:30.970Z,1520718450.970 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:47:31.365Z,1520718451.365 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:47:31.759Z,1520718451.759 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:47:32.159Z,1520718452.159 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:47:32.578Z,1520718452.578 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:47:32.984Z,1520718452.984 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:47:33.368Z,1520718453.368 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:47:33.768Z,1520718453.768 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:47:34.166Z,1520718454.166 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:47:34.570Z,1520718454.570 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:47:34.963Z,1520718454.963 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:47:35.372Z,1520718455.372 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:47:35.777Z,1520718455.777 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:47:36.158Z,1520718456.158 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:47:36.564Z,1520718456.564 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:47:36.972Z,1520718456.972 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:47:37.365Z,1520718457.365 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:47:37.758Z,1520718457.758 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:47:38.171Z,1520718458.171 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:47:38.560Z,1520718458.560 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:47:38.967Z,1520718458.967 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:47:39.365Z,1520718459.365 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:47:39.764Z,1520718459.764 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:47:40.168Z,1520718460.168 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:47:40.568Z,1520718460.568 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:47:40.968Z,1520718460.968 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:47:41.379Z,1520718461.379 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:47:41.769Z,1520718461.769 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:47:42.169Z,1520718462.169 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:47:42.559Z,1520718462.559 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:47:42.958Z,1520718462.958 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:47:43.364Z,1520718463.364 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:47:43.758Z,1520718463.758 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:47:44.163Z,1520718464.163 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:47:44.563Z,1520718464.563 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:47:44.967Z,1520718464.967 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:47:45.388Z,1520718465.388 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:47:45.780Z,1520718465.780 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:47:46.164Z,1520718466.164 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:47:46.560Z,1520718466.560 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:47:46.968Z,1520718466.968 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:47:47.368Z,1520718467.368 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:47:47.767Z,1520718467.767 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:47:48.168Z,1520718468.168 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:47:48.565Z,1520718468.565 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:47:48.968Z,1520718468.968 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:47:49.359Z,1520718469.359 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:47:49.778Z,1520718469.778 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:47:50.169Z,1520718470.169 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:47:50.564Z,1520718470.564 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:47:50.963Z,1520718470.963 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:47:51.368Z,1520718471.368 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:47:51.767Z,1520718471.767 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:47:56.800Z,1520718476.800 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:47:56.957Z,1520718476.957 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:47:57.359Z,1520718477.359 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:47:57.744Z,1520718477.744 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:47:58.139Z,1520718478.139 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:47:58.562Z,1520718478.562 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:47:58.959Z,1520718478.959 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:47:59.339Z,1520718479.339 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:47:59.743Z,1520718479.743 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:48:00.151Z,1520718480.151 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:48:00.546Z,1520718480.546 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:48:00.948Z,1520718480.948 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:48:01.357Z,1520718481.357 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:48:01.738Z,1520718481.738 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:48:02.139Z,1520718482.139 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:48:02.557Z,1520718482.557 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:48:02.950Z,1520718482.950 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:48:03.350Z,1520718483.350 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:48:03.744Z,1520718483.744 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:48:04.146Z,1520718484.146 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:48:04.548Z,1520718484.548 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:48:04.956Z,1520718484.956 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:48:05.339Z,1520718485.339 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:48:05.752Z,1520718485.752 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:48:06.152Z,1520718486.152 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:48:06.547Z,1520718486.547 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:48:06.938Z,1520718486.938 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:48:07.360Z,1520718487.360 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:48:07.750Z,1520718487.750 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:48:08.148Z,1520718488.148 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:48:08.553Z,1520718488.553 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:48:08.952Z,1520718488.952 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:48:09.356Z,1520718489.356 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:48:09.752Z,1520718489.752 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:48:10.157Z,1520718490.157 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:48:10.541Z,1520718490.541 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:48:10.939Z,1520718490.939 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:48:11.358Z,1520718491.358 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:48:11.755Z,1520718491.755 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:48:12.150Z,1520718492.150 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:48:12.548Z,1520718492.548 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:48:12.950Z,1520718492.950 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:48:13.345Z,1520718493.345 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:48:13.739Z,1520718493.739 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:48:14.143Z,1520718494.143 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:48:14.539Z,1520718494.539 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:48:14.948Z,1520718494.948 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:48:15.360Z,1520718495.360 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:48:15.752Z,1520718495.752 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:48:16.148Z,1520718496.148 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:48:16.539Z,1520718496.539 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:48:16.938Z,1520718496.938 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:48:17.339Z,1520718497.339 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:48:17.747Z,1520718497.747 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:48:18.147Z,1520718498.147 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:48:18.540Z,1520718498.540 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:48:18.940Z,1520718498.940 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:48:19.343Z,1520718499.343 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:48:19.744Z,1520718499.744 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:48:20.150Z,1520718500.150 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:48:20.553Z,1520718500.553 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:48:20.954Z,1520718500.954 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:48:21.359Z,1520718501.359 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:48:21.760Z,1520718501.760 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:48:22.140Z,1520718502.140 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:48:22.544Z,1520718502.544 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:48:22.583Z,1520718502.583 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T21:48:22.583Z,1520718502.583 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 4
2018-03-10T21:48:22.583Z,1520718502.583 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-10T21:48:22.624Z,1520718502.624 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-10T21:48:22.950Z,1520718502.950 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:48:23.073Z,1520718503.073 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-10T21:48:23.073Z,1520718503.073 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 4
2018-03-10T21:48:23.348Z,1520718503.348 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:48:23.416Z,1520718503.416 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-10T21:48:23.416Z,1520718503.416 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-10T21:48:23.417Z,1520718503.417 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-10T21:48:23.740Z,1520718503.740 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:48:24.143Z,1520718504.143 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:48:24.543Z,1520718504.543 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:48:24.952Z,1520718504.952 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:48:25.341Z,1520718505.341 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:48:25.755Z,1520718505.755 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:48:26.158Z,1520718506.158 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:48:26.538Z,1520718506.538 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:48:26.937Z,1520718506.937 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:48:27.339Z,1520718507.339 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:48:27.743Z,1520718507.743 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:48:28.148Z,1520718508.148 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:48:28.547Z,1520718508.547 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:48:28.952Z,1520718508.952 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:48:29.339Z,1520718509.339 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:48:29.738Z,1520718509.738 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:48:30.159Z,1520718510.159 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:48:30.551Z,1520718510.551 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:48:30.943Z,1520718510.943 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:48:31.343Z,1520718511.343 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:48:31.752Z,1520718511.752 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:48:32.151Z,1520718512.151 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:48:32.546Z,1520718512.546 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:48:32.939Z,1520718512.939 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:48:33.339Z,1520718513.339 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:48:33.747Z,1520718513.747 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:48:34.153Z,1520718514.153 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:48:34.539Z,1520718514.539 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:48:34.939Z,1520718514.939 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:48:35.344Z,1520718515.344 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:48:35.747Z,1520718515.747 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:48:36.148Z,1520718516.148 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:48:36.548Z,1520718516.548 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:48:36.947Z,1520718516.947 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:48:37.345Z,1520718517.345 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:48:37.739Z,1520718517.739 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:48:38.139Z,1520718518.139 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:48:38.563Z,1520718518.563 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:48:38.948Z,1520718518.948 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:48:39.349Z,1520718519.349 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:48:39.749Z,1520718519.749 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:48:40.149Z,1520718520.149 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:48:40.544Z,1520718520.544 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:48:40.939Z,1520718520.939 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:48:41.339Z,1520718521.339 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:48:41.748Z,1520718521.748 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:48:42.154Z,1520718522.154 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:48:42.541Z,1520718522.541 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:48:42.944Z,1520718522.944 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:48:43.338Z,1520718523.338 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:48:43.740Z,1520718523.740 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:48:44.140Z,1520718524.140 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:48:44.538Z,1520718524.538 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:48:44.948Z,1520718524.948 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:48:45.349Z,1520718525.349 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:48:45.750Z,1520718525.750 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:48:46.147Z,1520718526.147 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:48:46.539Z,1520718526.539 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:48:46.938Z,1520718526.938 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:48:47.340Z,1520718527.340 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:48:47.748Z,1520718527.748 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:48:48.152Z,1520718528.152 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:48:48.544Z,1520718528.544 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:48:48.949Z,1520718528.949 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:48:49.338Z,1520718529.338 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:48:49.740Z,1520718529.740 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:48:50.138Z,1520718530.138 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:48:50.199Z,1520718530.199 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-03-10T21:43:49.8Z
2018-03-10T21:48:50.199Z,1520718530.199 [Default:CheckIn:Read_GPS] Stopped
2018-03-10T21:48:50.199Z,1520718530.199 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-03-10T21:48:50.543Z,1520718530.543 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:48:51.263Z,1520718531.263 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:48:51.441Z,1520718531.441 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:48:56.220Z,1520718536.220 [NAL9602](INFO): SBD MO Status=2, MOMSN=5850, MT Status=2, MTMSN=0
2018-03-10T21:48:56.220Z,1520718536.220 [NAL9602](ERROR): Failed to initiate SBD session. Error code: 2
2018-03-10T21:48:56.236Z,1520718536.236 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:48:56.396Z,1520718536.396 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:48:56.736Z,1520718536.736 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20180310T051512/Courier0392.lzma
2018-03-10T21:48:56.802Z,1520718536.802 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:48:57.189Z,1520718537.189 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:48:57.530Z,1520718537.530 [DataOverHttps](INFO): Moved sent file to Logs/20180310T051512/Courier0392.lzma.bak
2018-03-10T21:48:57.530Z,1520718537.530 [DataOverHttps](INFO): SBD MOMSN=8008691
2018-03-10T21:48:57.622Z,1520718537.622 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:48:58.442Z,1520718538.442 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:48:58.588Z,1520718538.588 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:49:03.604Z,1520718543.604 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:49:03.810Z,1520718543.810 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:49:04.171Z,1520718544.171 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:49:04.577Z,1520718544.577 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:49:04.971Z,1520718544.971 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:49:05.378Z,1520718545.378 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:49:12.066Z,1520718552.066 [NAL9602](INFO): SBD MO Status=2, MOMSN=5850, MT Status=2, MTMSN=0
2018-03-10T21:49:12.066Z,1520718552.066 [NAL9602](ERROR): Failed to initiate SBD session. Error code: 2
2018-03-10T21:49:12.104Z,1520718552.104 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:49:12.279Z,1520718552.279 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session.
2018-03-10T21:49:12.323Z,1520718552.323 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:49:12.688Z,1520718552.688 [DataOverHttps](INFO): Sending 158 bytes from file Logs/20180310T051512/Express0393.lzma
2018-03-10T21:49:12.735Z,1520718552.735 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:49:13.142Z,1520718553.142 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:49:13.495Z,1520718553.495 [DataOverHttps](INFO): Moved sent file to Logs/20180310T051512/Express0393.lzma.bak
2018-03-10T21:49:13.495Z,1520718553.495 [DataOverHttps](INFO): SBD MOMSN=8008693
2018-03-10T21:49:13.590Z,1520718553.590 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:49:15.999Z,1520718555.999 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:49:16.185Z,1520718556.185 [Default:CheckIn:Read_Iridium] Stopped
2018-03-10T21:49:16.185Z,1520718556.185 [Default:CheckIn:C.Wait] Running Loop=1
2018-03-10T21:49:16.185Z,1520718556.185 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-03-10T21:49:16.313Z,1520718556.313 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:49:22.757Z,1520718562.757 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:49:22.916Z,1520718562.916 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:49:23.304Z,1520718563.304 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:49:23.707Z,1520718563.707 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:49:24.110Z,1520718564.110 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:49:24.510Z,1520718564.510 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:49:24.907Z,1520718564.907 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:49:25.298Z,1520718565.298 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:49:25.704Z,1520718565.704 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:49:26.120Z,1520718566.120 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:49:26.507Z,1520718566.507 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:49:26.904Z,1520718566.904 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:49:27.306Z,1520718567.306 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:49:27.710Z,1520718567.710 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:49:28.106Z,1520718568.106 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:49:28.498Z,1520718568.498 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:49:28.915Z,1520718568.915 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:49:29.300Z,1520718569.300 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:49:29.699Z,1520718569.699 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:49:30.110Z,1520718570.110 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:49:30.506Z,1520718570.506 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:49:30.906Z,1520718570.906 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:49:31.298Z,1520718571.298 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:49:31.703Z,1520718571.703 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:49:32.102Z,1520718572.102 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:49:32.512Z,1520718572.512 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:49:32.908Z,1520718572.908 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:49:33.306Z,1520718573.306 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:49:33.704Z,1520718573.704 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:49:34.107Z,1520718574.107 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:49:34.499Z,1520718574.499 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:49:34.892Z,1520718574.892 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:49:35.298Z,1520718575.298 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:49:35.698Z,1520718575.698 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:49:36.102Z,1520718576.102 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:49:36.520Z,1520718576.520 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:49:36.906Z,1520718576.906 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:49:37.310Z,1520718577.310 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:49:37.717Z,1520718577.717 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:49:38.098Z,1520718578.098 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:49:38.496Z,1520718578.496 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:49:38.916Z,1520718578.916 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:49:39.298Z,1520718579.298 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:49:39.698Z,1520718579.698 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:49:40.108Z,1520718580.108 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:49:40.506Z,1520718580.506 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:49:40.906Z,1520718580.906 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:49:41.298Z,1520718581.298 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:49:41.698Z,1520718581.698 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:49:42.103Z,1520718582.103 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:49:42.508Z,1520718582.508 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:49:42.880Z,1520718582.880 [NAL9602](INFO): Powering down
2018-03-10T21:49:42.929Z,1520718582.929 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:49:43.298Z,1520718583.298 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:49:43.712Z,1520718583.712 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:49:44.098Z,1520718584.098 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:49:44.496Z,1520718584.496 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:49:44.904Z,1520718584.904 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:49:45.309Z,1520718585.309 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:49:45.694Z,1520718585.694 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:49:46.133Z,1520718586.133 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:49:46.503Z,1520718586.503 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:49:46.902Z,1520718586.902 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:49:47.310Z,1520718587.310 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:49:47.707Z,1520718587.707 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:49:48.105Z,1520718588.105 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:49:48.499Z,1520718588.499 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:49:48.898Z,1520718588.898 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:49:49.305Z,1520718589.305 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:49:49.706Z,1520718589.706 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:49:50.095Z,1520718590.095 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:49:50.507Z,1520718590.507 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:49:50.904Z,1520718590.904 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:49:51.304Z,1520718591.304 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:49:51.702Z,1520718591.702 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:49:52.118Z,1520718592.118 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:49:52.507Z,1520718592.507 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:49:52.906Z,1520718592.906 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:49:53.299Z,1520718593.299 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:49:53.698Z,1520718593.698 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:49:54.097Z,1520718594.097 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:49:54.501Z,1520718594.501 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:49:54.896Z,1520718594.896 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:49:55.301Z,1520718595.301 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:49:55.724Z,1520718595.724 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:49:56.104Z,1520718596.104 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:49:56.495Z,1520718596.495 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:49:56.911Z,1520718596.911 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:49:57.307Z,1520718597.307 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:49:57.697Z,1520718597.697 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:49:58.108Z,1520718598.108 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:49:58.505Z,1520718598.505 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:49:58.892Z,1520718598.892 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:49:59.298Z,1520718599.298 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:49:59.698Z,1520718599.698 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:50:00.092Z,1520718600.092 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:50:00.503Z,1520718600.503 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:50:00.905Z,1520718600.905 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:50:01.306Z,1520718601.306 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:50:01.712Z,1520718601.712 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:50:02.106Z,1520718602.106 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:50:02.498Z,1520718602.498 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:50:02.904Z,1520718602.904 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:50:03.303Z,1520718603.303 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:50:03.705Z,1520718603.705 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:50:04.107Z,1520718604.107 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:50:04.503Z,1520718604.503 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:50:04.908Z,1520718604.908 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:50:05.312Z,1520718605.312 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:50:05.705Z,1520718605.705 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:50:06.099Z,1520718606.099 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:50:06.507Z,1520718606.507 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:50:06.903Z,1520718606.903 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:50:07.303Z,1520718607.303 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:50:07.709Z,1520718607.709 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:50:08.098Z,1520718608.098 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:50:08.511Z,1520718608.511 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:50:08.916Z,1520718608.916 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:50:09.307Z,1520718609.307 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:50:09.700Z,1520718609.700 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:50:10.118Z,1520718610.118 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:50:10.506Z,1520718610.506 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:50:10.896Z,1520718610.896 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:50:11.303Z,1520718611.303 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:50:11.699Z,1520718611.699 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:50:12.098Z,1520718612.098 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:50:12.504Z,1520718612.504 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:50:12.906Z,1520718612.906 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:50:13.298Z,1520718613.298 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:50:13.707Z,1520718613.707 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:50:14.108Z,1520718614.108 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:50:14.507Z,1520718614.507 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:50:14.908Z,1520718614.908 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:50:15.308Z,1520718615.308 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:50:15.699Z,1520718615.699 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:50:16.119Z,1520718616.119 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:50:16.510Z,1520718616.510 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:50:21.472Z,1520718621.472 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:50:21.696Z,1520718621.696 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:50:22.088Z,1520718622.088 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:50:22.493Z,1520718622.493 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:50:22.888Z,1520718622.888 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:50:23.282Z,1520718623.282 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:50:23.681Z,1520718623.681 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:50:24.083Z,1520718624.083 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:50:24.483Z,1520718624.483 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:50:24.885Z,1520718624.885 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:50:25.293Z,1520718625.293 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:50:25.693Z,1520718625.693 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:50:26.081Z,1520718626.081 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:50:26.482Z,1520718626.482 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:50:26.886Z,1520718626.886 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:50:27.287Z,1520718627.287 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:50:27.693Z,1520718627.693 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:50:28.091Z,1520718628.091 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:50:28.483Z,1520718628.483 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:50:28.898Z,1520718628.898 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:50:29.283Z,1520718629.283 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:50:29.695Z,1520718629.695 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:50:30.086Z,1520718630.086 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:50:30.492Z,1520718630.492 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:50:30.891Z,1520718630.891 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:50:31.293Z,1520718631.293 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:50:31.692Z,1520718631.692 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:50:32.082Z,1520718632.082 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:50:32.488Z,1520718632.488 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:50:32.882Z,1520718632.882 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:50:33.287Z,1520718633.287 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:50:33.682Z,1520718633.682 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:50:34.086Z,1520718634.086 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:50:34.496Z,1520718634.496 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:50:34.895Z,1520718634.895 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:50:35.290Z,1520718635.290 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:50:35.682Z,1520718635.682 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:50:36.092Z,1520718636.092 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:50:36.491Z,1520718636.491 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:50:36.883Z,1520718636.883 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:50:37.289Z,1520718637.289 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:50:37.682Z,1520718637.682 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:50:38.080Z,1520718638.080 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:50:38.487Z,1520718638.487 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:50:38.889Z,1520718638.889 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:50:39.292Z,1520718639.292 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:50:39.690Z,1520718639.690 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:50:40.082Z,1520718640.082 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:50:40.476Z,1520718640.476 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:50:40.891Z,1520718640.891 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:50:41.287Z,1520718641.287 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:50:41.687Z,1520718641.687 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:50:42.094Z,1520718642.094 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:50:42.489Z,1520718642.489 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:50:42.882Z,1520718642.882 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:50:43.292Z,1520718643.292 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:50:43.690Z,1520718643.690 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:50:44.097Z,1520718644.097 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:50:44.495Z,1520718644.495 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:50:44.882Z,1520718644.882 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:50:45.282Z,1520718645.282 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:50:45.688Z,1520718645.688 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:50:46.090Z,1520718646.090 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:50:46.490Z,1520718646.490 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:50:46.894Z,1520718646.894 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:50:47.287Z,1520718647.287 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:50:47.686Z,1520718647.686 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:50:48.088Z,1520718648.088 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:50:48.491Z,1520718648.491 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:50:48.892Z,1520718648.892 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:50:49.289Z,1520718649.289 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:50:49.691Z,1520718649.691 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:50:50.080Z,1520718650.080 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:50:50.483Z,1520718650.483 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:50:50.883Z,1520718650.883 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:50:51.289Z,1520718651.289 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:50:51.695Z,1520718651.695 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:50:52.090Z,1520718652.090 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:50:52.488Z,1520718652.488 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:50:52.882Z,1520718652.882 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:50:53.282Z,1520718653.282 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:50:53.683Z,1520718653.683 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:50:54.093Z,1520718654.093 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:50:54.490Z,1520718654.490 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:50:54.898Z,1520718654.898 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:50:55.282Z,1520718655.282 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:50:55.682Z,1520718655.682 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:50:56.083Z,1520718656.083 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:50:56.492Z,1520718656.492 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:50:56.890Z,1520718656.890 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:50:57.298Z,1520718657.298 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:50:57.688Z,1520718657.688 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:50:58.083Z,1520718658.083 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:50:58.482Z,1520718658.482 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:50:58.884Z,1520718658.884 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:50:59.286Z,1520718659.286 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:50:59.683Z,1520718659.683 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:51:00.102Z,1520718660.102 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:51:00.491Z,1520718660.491 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:51:00.882Z,1520718660.882 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:51:01.288Z,1520718661.288 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:51:01.682Z,1520718661.682 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:51:02.083Z,1520718662.083 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:51:02.492Z,1520718662.492 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:51:02.897Z,1520718662.897 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:51:03.282Z,1520718663.282 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:51:03.682Z,1520718663.682 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:51:04.082Z,1520718664.082 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:51:04.482Z,1520718664.482 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:51:04.887Z,1520718664.887 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:51:05.290Z,1520718665.290 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:51:05.690Z,1520718665.690 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:51:06.096Z,1520718666.096 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:51:06.498Z,1520718666.498 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:51:06.883Z,1520718666.883 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:51:07.283Z,1520718667.283 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:51:07.682Z,1520718667.682 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:51:08.091Z,1520718668.091 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:51:08.496Z,1520718668.496 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:51:08.888Z,1520718668.888 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:51:09.299Z,1520718669.299 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:51:09.683Z,1520718669.683 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:51:10.087Z,1520718670.087 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:51:10.490Z,1520718670.490 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:51:10.900Z,1520718670.900 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:51:11.310Z,1520718671.310 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:51:11.683Z,1520718671.683 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:51:12.099Z,1520718672.099 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:51:12.508Z,1520718672.508 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:51:12.934Z,1520718672.934 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:51:13.302Z,1520718673.302 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:51:13.734Z,1520718673.734 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:51:14.111Z,1520718674.111 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:51:14.517Z,1520718674.517 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:51:14.913Z,1520718674.913 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:51:15.287Z,1520718675.287 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:51:15.699Z,1520718675.699 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:51:16.112Z,1520718676.112 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:51:16.529Z,1520718676.529 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:51:16.887Z,1520718676.887 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:51:22.802Z,1520718682.802 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:51:22.953Z,1520718682.953 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:51:23.347Z,1520718683.347 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:51:23.743Z,1520718683.743 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:51:23.825Z,1520718683.825 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T21:51:23.825Z,1520718683.825 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 5
2018-03-10T21:51:23.825Z,1520718683.825 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-10T21:51:23.837Z,1520718683.837 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-10T21:51:24.135Z,1520718684.135 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:51:24.237Z,1520718684.237 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-10T21:51:24.237Z,1520718684.237 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 5
2018-03-10T21:51:24.545Z,1520718684.545 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:51:24.596Z,1520718684.596 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-10T21:51:24.597Z,1520718684.597 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-10T21:51:24.597Z,1520718684.597 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-10T21:51:24.944Z,1520718684.944 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:51:25.343Z,1520718685.343 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:51:25.735Z,1520718685.735 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:51:26.144Z,1520718686.144 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:51:26.548Z,1520718686.548 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:51:26.942Z,1520718686.942 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:51:27.334Z,1520718687.334 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:51:27.734Z,1520718687.734 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:51:28.144Z,1520718688.144 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:51:28.542Z,1520718688.542 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:51:28.942Z,1520718688.942 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:51:29.342Z,1520718689.342 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:51:29.735Z,1520718689.735 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:51:30.128Z,1520718690.128 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:51:30.534Z,1520718690.534 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:51:30.943Z,1520718690.943 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:51:31.348Z,1520718691.348 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:51:31.741Z,1520718691.741 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:51:32.143Z,1520718692.143 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:51:32.552Z,1520718692.552 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:51:32.936Z,1520718692.936 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:51:33.335Z,1520718693.335 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:51:33.744Z,1520718693.744 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:51:34.146Z,1520718694.146 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:51:34.543Z,1520718694.543 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:51:34.934Z,1520718694.934 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:51:35.340Z,1520718695.340 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:51:35.734Z,1520718695.734 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:51:36.143Z,1520718696.143 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:51:36.545Z,1520718696.545 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:51:36.942Z,1520718696.942 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:51:37.335Z,1520718697.335 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:51:37.734Z,1520718697.734 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:51:38.142Z,1520718698.142 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:51:38.538Z,1520718698.538 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:51:38.944Z,1520718698.944 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:51:39.366Z,1520718699.366 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:51:39.728Z,1520718699.728 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:51:40.138Z,1520718700.138 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:51:40.542Z,1520718700.542 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:51:40.934Z,1520718700.934 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:51:41.340Z,1520718701.340 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:51:41.740Z,1520718701.740 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:51:42.143Z,1520718702.143 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:51:42.542Z,1520718702.542 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:51:42.982Z,1520718702.982 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:51:43.334Z,1520718703.334 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:51:43.739Z,1520718703.739 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:51:44.147Z,1520718704.147 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:51:44.540Z,1520718704.540 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:51:44.936Z,1520718704.936 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:51:45.352Z,1520718705.352 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:51:45.737Z,1520718705.737 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:51:46.143Z,1520718706.143 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:51:46.554Z,1520718706.554 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:51:46.951Z,1520718706.951 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:51:47.348Z,1520718707.348 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:51:47.758Z,1520718707.758 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:51:48.134Z,1520718708.134 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:51:48.547Z,1520718708.547 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:51:48.946Z,1520718708.946 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:51:49.342Z,1520718709.342 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:51:49.734Z,1520718709.734 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:51:50.139Z,1520718710.139 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:51:50.534Z,1520718710.534 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:51:50.939Z,1520718710.939 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:51:51.349Z,1520718711.349 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:51:51.734Z,1520718711.734 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:51:52.140Z,1520718712.140 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:51:52.533Z,1520718712.533 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:51:52.936Z,1520718712.936 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:51:53.355Z,1520718713.355 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:51:53.732Z,1520718713.732 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:51:54.138Z,1520718714.138 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:51:54.547Z,1520718714.547 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:51:54.942Z,1520718714.942 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:51:55.334Z,1520718715.334 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:51:55.734Z,1520718715.734 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:51:56.135Z,1520718716.135 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:51:56.535Z,1520718716.535 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:51:56.944Z,1520718716.944 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:51:57.344Z,1520718717.344 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:51:57.740Z,1520718717.740 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:51:58.144Z,1520718718.144 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:51:58.549Z,1520718718.549 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:51:58.940Z,1520718718.940 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:51:59.344Z,1520718719.344 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:51:59.735Z,1520718719.735 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:52:00.138Z,1520718720.138 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:52:00.547Z,1520718720.547 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:52:00.949Z,1520718720.949 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:52:01.343Z,1520718721.343 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:52:01.734Z,1520718721.734 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:52:02.136Z,1520718722.136 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:52:02.534Z,1520718722.534 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:52:02.944Z,1520718722.944 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:52:03.346Z,1520718723.346 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:52:03.742Z,1520718723.742 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:52:04.144Z,1520718724.144 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:52:04.534Z,1520718724.534 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:52:04.949Z,1520718724.949 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:52:05.346Z,1520718725.346 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:52:05.742Z,1520718725.742 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:52:06.135Z,1520718726.135 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:52:06.538Z,1520718726.538 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:52:06.936Z,1520718726.936 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:52:07.343Z,1520718727.343 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:52:07.744Z,1520718727.744 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:52:08.140Z,1520718728.140 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:52:08.542Z,1520718728.542 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:52:08.950Z,1520718728.950 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:52:09.334Z,1520718729.334 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:52:09.739Z,1520718729.739 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:52:10.145Z,1520718730.145 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:52:10.543Z,1520718730.543 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:52:10.942Z,1520718730.942 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:52:11.334Z,1520718731.334 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:52:11.734Z,1520718731.734 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:52:12.149Z,1520718732.149 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:52:12.546Z,1520718732.546 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:52:12.942Z,1520718732.942 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:52:13.340Z,1520718733.340 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:52:13.754Z,1520718733.754 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:52:14.132Z,1520718734.132 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:52:14.534Z,1520718734.534 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:52:14.936Z,1520718734.936 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:52:15.348Z,1520718735.348 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:52:15.743Z,1520718735.743 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:52:16.134Z,1520718736.134 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:52:16.534Z,1520718736.534 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:52:16.934Z,1520718736.934 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:52:21.978Z,1520718741.978 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:52:21.987Z,1520718741.987 [BPC1](ERROR): Failed to receive battery data
2018-03-10T21:52:21.987Z,1520718741.987 [BPC1] Communications Fault, FailCount= 1
2018-03-10T21:52:21.987Z,1520718741.987 [BPC1](ERROR): Communications Fault
2018-03-10T21:52:22.098Z,1520718742.098 [CBIT](ERROR): Communications Fault in component: BPC1
2018-03-10T21:52:22.149Z,1520718742.149 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:52:22.548Z,1520718742.548 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:52:22.950Z,1520718742.950 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:52:23.029Z,1520718743.029 [CBIT](INFO): Clearing failed state for component BPC1
2018-03-10T21:52:23.030Z,1520718743.030 [BPC1] No Fault, FailCount= 1
2018-03-10T21:52:23.352Z,1520718743.352 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:52:23.734Z,1520718743.734 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:52:24.153Z,1520718744.153 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:52:24.534Z,1520718744.534 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:52:24.943Z,1520718744.943 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:52:25.344Z,1520718745.344 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:52:25.743Z,1520718745.743 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:52:26.147Z,1520718746.147 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:52:26.536Z,1520718746.536 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:52:26.932Z,1520718746.932 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:52:27.344Z,1520718747.344 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:52:27.740Z,1520718747.740 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:52:28.135Z,1520718748.135 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:52:28.556Z,1520718748.556 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:52:28.946Z,1520718748.946 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:52:29.342Z,1520718749.342 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:52:29.748Z,1520718749.748 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:52:30.134Z,1520718750.134 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:52:30.534Z,1520718750.534 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:52:30.939Z,1520718750.939 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:52:31.345Z,1520718751.345 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:52:31.742Z,1520718751.742 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:52:32.158Z,1520718752.158 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:52:32.534Z,1520718752.534 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:52:32.943Z,1520718752.943 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:52:33.339Z,1520718753.339 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:52:33.748Z,1520718753.748 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:52:34.142Z,1520718754.142 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:52:34.552Z,1520718754.552 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:52:34.942Z,1520718754.942 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:52:35.334Z,1520718755.334 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:52:35.734Z,1520718755.734 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:52:36.134Z,1520718756.134 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:52:36.535Z,1520718756.535 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:52:36.944Z,1520718756.944 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:52:37.341Z,1520718757.341 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:52:37.743Z,1520718757.743 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:52:38.147Z,1520718758.147 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:52:38.540Z,1520718758.540 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:52:38.942Z,1520718758.942 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:52:39.354Z,1520718759.354 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:52:39.730Z,1520718759.730 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:52:40.135Z,1520718760.135 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:52:40.535Z,1520718760.535 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:52:40.934Z,1520718760.934 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:52:41.344Z,1520718761.344 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:52:41.750Z,1520718761.750 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:52:42.136Z,1520718762.136 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:52:42.534Z,1520718762.534 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:52:42.935Z,1520718762.935 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:52:43.334Z,1520718763.334 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:52:43.743Z,1520718763.743 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:52:44.134Z,1520718764.134 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:52:44.539Z,1520718764.539 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:52:44.949Z,1520718764.949 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:52:45.340Z,1520718765.340 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:52:45.734Z,1520718765.734 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:52:46.152Z,1520718766.152 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:52:46.540Z,1520718766.540 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:52:46.934Z,1520718766.934 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:52:47.347Z,1520718767.347 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:52:47.748Z,1520718767.748 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:52:48.135Z,1520718768.135 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:52:48.535Z,1520718768.535 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:52:48.939Z,1520718768.939 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:52:49.336Z,1520718769.336 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:52:49.734Z,1520718769.734 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:52:50.143Z,1520718770.143 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:52:50.542Z,1520718770.542 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:52:50.942Z,1520718770.942 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:52:51.348Z,1520718771.348 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:52:51.734Z,1520718771.734 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:52:52.134Z,1520718772.134 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:52:52.552Z,1520718772.552 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:52:52.932Z,1520718772.932 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:52:53.343Z,1520718773.343 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:52:53.744Z,1520718773.744 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:52:53.752Z,1520718773.752 [BPC1](FAULT): Failed to initialize
2018-03-10T21:52:53.752Z,1520718773.752 [BPC1] Communications Fault, FailCount= 2
2018-03-10T21:52:53.752Z,1520718773.752 [BPC1](ERROR): Communications Fault
2018-03-10T21:52:53.866Z,1520718773.866 [CBIT](ERROR): Communications Fault in component: BPC1
2018-03-10T21:52:54.141Z,1520718774.141 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:52:54.544Z,1520718774.544 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:52:54.952Z,1520718774.952 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:52:55.038Z,1520718775.038 [CBIT](INFO): Clearing failed state for component BPC1
2018-03-10T21:52:55.038Z,1520718775.038 [BPC1] No Fault, FailCount= 2
2018-03-10T21:52:55.334Z,1520718775.334 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:52:55.735Z,1520718775.735 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:52:56.134Z,1520718776.134 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:52:56.534Z,1520718776.534 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:52:56.943Z,1520718776.943 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:52:57.345Z,1520718777.345 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:52:57.732Z,1520718777.732 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:52:58.152Z,1520718778.152 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:52:58.534Z,1520718778.534 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:52:58.942Z,1520718778.942 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:52:59.347Z,1520718779.347 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:52:59.749Z,1520718779.749 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:53:00.140Z,1520718780.140 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:53:00.535Z,1520718780.535 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:53:00.935Z,1520718780.935 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:53:01.332Z,1520718781.332 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:53:01.735Z,1520718781.735 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:53:02.143Z,1520718782.143 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:53:02.543Z,1520718782.543 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:53:02.946Z,1520718782.946 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:53:03.351Z,1520718783.351 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:53:03.741Z,1520718783.741 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:53:04.144Z,1520718784.144 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:53:04.535Z,1520718784.535 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:53:04.932Z,1520718784.932 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:53:05.344Z,1520718785.344 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:53:05.765Z,1520718785.765 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:53:06.139Z,1520718786.139 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:53:06.548Z,1520718786.548 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:53:06.955Z,1520718786.955 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:53:07.334Z,1520718787.334 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:53:07.740Z,1520718787.740 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:53:08.134Z,1520718788.134 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:53:08.535Z,1520718788.535 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:53:08.936Z,1520718788.936 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:53:09.347Z,1520718789.347 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:53:09.742Z,1520718789.742 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:53:10.162Z,1520718790.162 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:53:10.534Z,1520718790.534 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:53:10.977Z,1520718790.977 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:53:11.333Z,1520718791.333 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:53:11.736Z,1520718791.736 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:53:12.157Z,1520718792.157 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:53:12.560Z,1520718792.560 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:53:12.971Z,1520718792.971 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:53:13.372Z,1520718793.372 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:53:13.768Z,1520718793.768 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:53:14.147Z,1520718794.147 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:53:14.550Z,1520718794.550 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:53:14.939Z,1520718794.939 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:53:15.342Z,1520718795.342 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:53:15.734Z,1520718795.734 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:53:16.160Z,1520718796.160 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:53:16.590Z,1520718796.590 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:53:16.983Z,1520718796.983 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:53:22.219Z,1520718802.219 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:53:22.371Z,1520718802.371 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:53:22.759Z,1520718802.759 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:53:23.137Z,1520718803.137 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:53:23.539Z,1520718803.539 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:53:23.959Z,1520718803.959 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:53:24.368Z,1520718804.368 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:53:24.738Z,1520718804.738 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:53:25.135Z,1520718805.135 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:53:25.535Z,1520718805.535 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:53:25.545Z,1520718805.545 [BPC1](FAULT): Failed to initialize
2018-03-10T21:53:25.545Z,1520718805.545 [BPC1] Communications Fault, FailCount= 3
2018-03-10T21:53:25.545Z,1520718805.545 [BPC1](ERROR): Communications Fault
2018-03-10T21:53:25.568Z,1520718805.568 [CBIT](ERROR): Communications Fault in component: BPC1
2018-03-10T21:53:25.939Z,1520718805.939 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:53:26.338Z,1520718806.338 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:53:26.731Z,1520718806.731 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:53:26.764Z,1520718806.764 [CBIT](INFO): Clearing failed state for component BPC1
2018-03-10T21:53:26.764Z,1520718806.764 [BPC1] No Fault, FailCount= 3
2018-03-10T21:53:27.205Z,1520718807.205 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:53:27.613Z,1520718807.613 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:53:28.005Z,1520718808.005 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:53:28.395Z,1520718808.395 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:53:28.772Z,1520718808.772 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:53:29.142Z,1520718809.142 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:53:29.553Z,1520718809.553 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:53:29.941Z,1520718809.941 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:53:30.330Z,1520718810.330 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:53:30.738Z,1520718810.738 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:53:31.138Z,1520718811.138 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:53:31.539Z,1520718811.539 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:53:31.945Z,1520718811.945 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:53:32.353Z,1520718812.353 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:53:32.743Z,1520718812.743 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:53:33.138Z,1520718813.138 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:53:33.556Z,1520718813.556 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:53:33.960Z,1520718813.960 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:53:34.387Z,1520718814.387 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:53:34.738Z,1520718814.738 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:53:35.132Z,1520718815.132 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:53:35.538Z,1520718815.538 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:53:35.940Z,1520718815.940 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:53:36.339Z,1520718816.339 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:53:36.753Z,1520718816.753 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:53:37.138Z,1520718817.138 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:53:37.538Z,1520718817.538 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:53:37.938Z,1520718817.938 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:53:38.360Z,1520718818.360 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:53:38.737Z,1520718818.737 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:53:39.136Z,1520718819.136 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:53:39.546Z,1520718819.546 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:53:39.939Z,1520718819.939 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:53:40.353Z,1520718820.353 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:53:40.800Z,1520718820.800 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:53:41.133Z,1520718821.133 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:53:41.579Z,1520718821.579 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:53:41.977Z,1520718821.977 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:53:42.343Z,1520718822.343 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:53:42.752Z,1520718822.752 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:53:43.140Z,1520718823.140 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:53:43.548Z,1520718823.548 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:53:43.971Z,1520718823.971 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:53:44.342Z,1520718824.342 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:53:44.739Z,1520718824.739 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:53:45.153Z,1520718825.153 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:53:45.557Z,1520718825.556 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:53:45.936Z,1520718825.936 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:53:46.352Z,1520718826.352 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:53:46.752Z,1520718826.752 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:53:47.135Z,1520718827.135 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:53:47.548Z,1520718827.548 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:53:47.936Z,1520718827.936 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:53:48.338Z,1520718828.338 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:53:48.740Z,1520718828.740 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:53:49.139Z,1520718829.139 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:53:49.579Z,1520718829.579 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:53:49.960Z,1520718829.960 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:53:50.376Z,1520718830.376 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:53:50.736Z,1520718830.736 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:53:51.150Z,1520718831.150 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:53:51.538Z,1520718831.538 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:53:51.964Z,1520718831.964 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:53:52.373Z,1520718832.373 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:53:52.744Z,1520718832.744 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:53:53.153Z,1520718833.153 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:53:53.560Z,1520718833.560 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:53:53.940Z,1520718833.940 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:53:54.338Z,1520718834.338 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:53:54.765Z,1520718834.765 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:53:55.138Z,1520718835.138 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:53:55.538Z,1520718835.538 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:53:55.938Z,1520718835.938 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:53:56.337Z,1520718836.337 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:53:56.739Z,1520718836.739 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:53:57.177Z,1520718837.177 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:53:57.533Z,1520718837.533 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:53:57.542Z,1520718837.542 [BPC1](FAULT): Failed to initialize
2018-03-10T21:53:57.542Z,1520718837.542 [BPC1] Communications Fault, FailCount= 4
2018-03-10T21:53:57.542Z,1520718837.542 [BPC1](ERROR): Communications Fault
2018-03-10T21:53:57.644Z,1520718837.644 [CBIT](ERROR): Communications Fault in component: BPC1
2018-03-10T21:53:57.939Z,1520718837.939 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:53:58.338Z,1520718838.338 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:53:58.745Z,1520718838.745 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:53:58.816Z,1520718838.816 [CBIT](INFO): Clearing failed state for component BPC1
2018-03-10T21:53:58.816Z,1520718838.816 [BPC1] No Fault, FailCount= 4
2018-03-10T21:53:59.190Z,1520718839.190 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:53:59.545Z,1520718839.545 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:53:59.942Z,1520718839.942 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:54:00.386Z,1520718840.386 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:54:00.760Z,1520718840.760 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:54:01.136Z,1520718841.136 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:54:01.542Z,1520718841.542 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:54:01.959Z,1520718841.959 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:54:02.340Z,1520718842.340 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:54:02.755Z,1520718842.755 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:54:03.138Z,1520718843.138 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:54:03.538Z,1520718843.538 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:54:03.945Z,1520718843.945 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:54:04.445Z,1520718844.445 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:54:04.741Z,1520718844.741 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:54:05.168Z,1520718845.168 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:54:05.591Z,1520718845.591 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:54:05.932Z,1520718845.932 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:54:06.340Z,1520718846.340 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:54:06.759Z,1520718846.759 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:54:07.164Z,1520718847.164 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:54:07.538Z,1520718847.538 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:54:07.965Z,1520718847.965 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:54:08.336Z,1520718848.336 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:54:08.738Z,1520718848.738 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:54:09.140Z,1520718849.140 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:54:09.551Z,1520718849.551 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:54:09.957Z,1520718849.957 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:54:10.356Z,1520718850.356 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:54:10.738Z,1520718850.738 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:54:11.138Z,1520718851.138 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:54:11.598Z,1520718851.598 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:54:11.938Z,1520718851.938 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:54:12.362Z,1520718852.362 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:54:12.773Z,1520718852.773 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:54:13.136Z,1520718853.136 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:54:13.553Z,1520718853.553 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:54:13.989Z,1520718853.989 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:54:14.332Z,1520718854.332 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:54:14.757Z,1520718854.757 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:54:15.183Z,1520718855.183 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:54:15.548Z,1520718855.548 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:54:15.939Z,1520718855.939 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:54:16.353Z,1520718856.353 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:54:16.750Z,1520718856.750 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:54:16.786Z,1520718856.786 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-03-10T21:54:16.786Z,1520718856.786 [Default:CheckIn:C.Wait] Stopped
2018-03-10T21:54:16.786Z,1520718856.786 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-03-10T21:54:16.786Z,1520718856.786 [Default:CheckIn:D] Running Loop=1
2018-03-10T21:54:17.162Z,1520718857.162 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:54:17.232Z,1520718857.232 [Default:CheckIn:D] Stopped
2018-03-10T21:54:17.232Z,1520718857.232 [Default:CheckIn:E] Running Loop=1
2018-03-10T21:54:22.137Z,1520718862.137 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:54:22.194Z,1520718862.194 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 994.988542 min 
2018-03-10T21:54:22.194Z,1520718862.194 [Default:CheckIn:E] Stopped
2018-03-10T21:54:22.194Z,1520718862.194 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-03-10T21:54:22.194Z,1520718862.194 [Default:CheckIn] Stopped
2018-03-10T21:54:22.195Z,1520718862.195 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-03-10T21:54:22.195Z,1520718862.195 [Default:CheckIn](INFO): Running loop #99
2018-03-10T21:54:22.195Z,1520718862.195 [Default:CheckIn] Running Loop=99
2018-03-10T21:54:22.195Z,1520718862.195 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-03-10T21:54:22.195Z,1520718862.195 [Default:CheckIn:Read_GPS] Running Loop=1
2018-03-10T21:54:22.323Z,1520718862.323 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:54:22.652Z,1520718862.652 [NAL9602](INFO): Powering up
2018-03-10T21:54:22.672Z,1520718862.672 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:54:23.070Z,1520718863.070 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:54:23.476Z,1520718863.476 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:54:23.862Z,1520718863.862 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:54:24.262Z,1520718864.262 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:54:24.663Z,1520718864.663 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:54:24.714Z,1520718864.714 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T21:54:24.714Z,1520718864.714 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 6
2018-03-10T21:54:24.714Z,1520718864.714 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-10T21:54:24.764Z,1520718864.764 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-10T21:54:25.081Z,1520718865.081 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:54:25.160Z,1520718865.160 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-10T21:54:25.160Z,1520718865.160 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 6
2018-03-10T21:54:25.463Z,1520718865.463 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:54:25.533Z,1520718865.533 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-10T21:54:25.533Z,1520718865.533 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-10T21:54:25.533Z,1520718865.533 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-10T21:54:25.862Z,1520718865.862 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:54:26.262Z,1520718866.262 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:54:26.663Z,1520718866.663 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:54:27.083Z,1520718867.083 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:54:27.468Z,1520718867.468 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:54:27.871Z,1520718867.871 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:54:28.262Z,1520718868.262 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:54:28.681Z,1520718868.681 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:54:29.070Z,1520718869.070 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:54:29.472Z,1520718869.472 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:54:29.862Z,1520718869.862 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:54:30.263Z,1520718870.263 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:54:30.672Z,1520718870.671 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:54:31.062Z,1520718871.062 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:54:31.462Z,1520718871.462 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:54:31.869Z,1520718871.869 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:54:32.282Z,1520718872.282 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:54:32.662Z,1520718872.662 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:54:33.062Z,1520718873.062 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:54:33.474Z,1520718873.474 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:54:33.860Z,1520718873.860 [NAL9602](INFO): NAL9602 initialized
2018-03-10T21:54:33.878Z,1520718873.878 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:54:34.260Z,1520718874.260 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:54:34.665Z,1520718874.665 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-03-10T21:54:34.665Z,1520718874.665 [NAL9602] Data Fault, FailCount= 1
2018-03-10T21:54:34.665Z,1520718874.665 [NAL9602](ERROR): Data Fault
2018-03-10T21:54:34.684Z,1520718874.684 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:54:34.832Z,1520718874.832 [CBIT](ERROR): Data Fault in component: NAL9602
2018-03-10T21:54:35.044Z,1520718875.044 [NAL9602](INFO): Powering down
2018-03-10T21:54:35.064Z,1520718875.064 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:54:35.473Z,1520718875.473 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:54:35.875Z,1520718875.875 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:54:36.001Z,1520718876.001 [CBIT](INFO): Clearing failed state for component NAL9602
2018-03-10T21:54:36.001Z,1520718876.001 [NAL9602] No Fault, FailCount= 1
2018-03-10T21:54:36.266Z,1520718876.266 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:54:36.678Z,1520718876.678 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:54:37.063Z,1520718877.063 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:54:37.468Z,1520718877.468 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:54:37.863Z,1520718877.863 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:54:38.262Z,1520718878.262 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:54:38.668Z,1520718878.668 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:54:39.076Z,1520718879.076 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:54:39.468Z,1520718879.468 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:54:39.862Z,1520718879.862 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:54:40.272Z,1520718880.272 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:54:40.671Z,1520718880.671 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:54:41.076Z,1520718881.076 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:54:41.472Z,1520718881.472 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:54:41.872Z,1520718881.872 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:54:42.262Z,1520718882.262 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:54:42.671Z,1520718882.671 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:54:43.068Z,1520718883.068 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:54:43.464Z,1520718883.464 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:54:43.868Z,1520718883.868 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:54:44.275Z,1520718884.275 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:54:44.662Z,1520718884.662 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:54:45.080Z,1520718885.080 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:54:45.464Z,1520718885.464 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:54:45.863Z,1520718885.863 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:54:46.271Z,1520718886.271 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:54:46.663Z,1520718886.663 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:54:47.062Z,1520718887.062 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:54:47.463Z,1520718887.463 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:54:47.867Z,1520718887.867 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:54:48.277Z,1520718888.277 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:54:48.676Z,1520718888.676 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:54:49.062Z,1520718889.062 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:54:49.462Z,1520718889.462 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:54:49.872Z,1520718889.872 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:54:50.268Z,1520718890.268 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:54:50.677Z,1520718890.677 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:54:51.072Z,1520718891.072 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:54:51.463Z,1520718891.463 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:54:51.864Z,1520718891.864 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:54:52.271Z,1520718892.271 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:54:52.677Z,1520718892.677 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:54:53.073Z,1520718893.073 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:54:53.464Z,1520718893.464 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:54:53.864Z,1520718893.864 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:54:54.263Z,1520718894.263 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:54:54.668Z,1520718894.668 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:54:55.072Z,1520718895.072 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:54:55.473Z,1520718895.473 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:54:55.872Z,1520718895.872 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:54:56.276Z,1520718896.276 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:54:56.667Z,1520718896.667 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:54:57.060Z,1520718897.060 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:54:57.463Z,1520718897.463 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:54:57.870Z,1520718897.870 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:54:58.265Z,1520718898.265 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:54:58.667Z,1520718898.667 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:54:59.062Z,1520718899.062 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:54:59.460Z,1520718899.460 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:54:59.867Z,1520718899.867 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:55:00.266Z,1520718900.266 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:55:00.670Z,1520718900.670 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:55:01.073Z,1520718901.073 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:55:01.469Z,1520718901.469 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:55:01.862Z,1520718901.862 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:55:02.262Z,1520718902.262 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:55:02.670Z,1520718902.670 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:55:03.071Z,1520718903.071 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:55:03.475Z,1520718903.475 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:55:03.876Z,1520718903.876 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:55:04.262Z,1520718904.262 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:55:04.676Z,1520718904.676 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:55:05.064Z,1520718905.064 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:55:05.442Z,1520718905.442 [NAL9602](INFO): Powering up NAL9602
2018-03-10T21:55:05.468Z,1520718905.468 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:55:05.874Z,1520718905.874 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:55:06.270Z,1520718906.270 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:55:06.662Z,1520718906.662 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:55:07.072Z,1520718907.072 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:55:07.472Z,1520718907.472 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:55:07.860Z,1520718907.860 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:55:08.263Z,1520718908.263 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:55:08.662Z,1520718908.662 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:55:09.060Z,1520718909.060 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:55:09.471Z,1520718909.471 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:55:09.869Z,1520718909.869 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:55:10.267Z,1520718910.267 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:55:10.671Z,1520718910.671 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:55:11.066Z,1520718911.066 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:55:11.468Z,1520718911.468 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:55:11.869Z,1520718911.869 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:55:12.266Z,1520718912.266 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:55:12.662Z,1520718912.662 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:55:13.079Z,1520718913.079 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:55:13.477Z,1520718913.477 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:55:13.869Z,1520718913.869 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:55:14.276Z,1520718914.276 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:55:14.684Z,1520718914.684 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:55:15.062Z,1520718915.062 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:55:15.478Z,1520718915.478 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:55:15.884Z,1520718915.884 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:55:16.244Z,1520718916.244 [NAL9602](INFO): NAL9602 initialized
2018-03-10T21:55:16.262Z,1520718916.262 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:55:16.672Z,1520718916.672 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:55:17.078Z,1520718917.078 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:55:17.485Z,1520718917.485 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:55:22.541Z,1520718922.541 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:55:22.687Z,1520718922.687 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:55:23.114Z,1520718923.114 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:55:23.496Z,1520718923.496 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:55:23.901Z,1520718923.901 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:55:24.292Z,1520718924.292 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:55:24.692Z,1520718924.692 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:55:25.091Z,1520718925.091 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:55:25.495Z,1520718925.495 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:55:25.888Z,1520718925.888 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:55:26.293Z,1520718926.293 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:55:26.687Z,1520718926.687 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:55:27.100Z,1520718927.100 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:55:27.492Z,1520718927.492 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:55:27.902Z,1520718927.902 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:55:28.312Z,1520718928.312 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:55:28.687Z,1520718928.687 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:55:29.088Z,1520718929.088 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:55:29.496Z,1520718929.496 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:55:29.897Z,1520718929.897 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:55:30.299Z,1520718930.299 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:55:30.692Z,1520718930.692 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:55:31.079Z,1520718931.079 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:55:31.500Z,1520718931.500 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:55:31.893Z,1520718931.893 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:55:32.301Z,1520718932.301 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:55:32.719Z,1520718932.719 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:55:33.087Z,1520718933.087 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:55:33.485Z,1520718933.485 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:55:33.896Z,1520718933.896 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:55:34.322Z,1520718934.322 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:55:34.700Z,1520718934.700 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:55:35.105Z,1520718935.105 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:55:35.521Z,1520718935.521 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:55:35.902Z,1520718935.902 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:55:36.324Z,1520718936.324 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:55:36.736Z,1520718936.736 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:55:37.106Z,1520718937.106 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:55:37.516Z,1520718937.516 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:55:37.926Z,1520718937.926 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:55:38.305Z,1520718938.305 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:55:38.718Z,1520718938.718 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:55:39.136Z,1520718939.136 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:55:39.505Z,1520718939.505 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:55:39.918Z,1520718939.918 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:55:40.322Z,1520718940.322 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:55:40.701Z,1520718940.701 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:55:41.087Z,1520718941.087 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:55:41.506Z,1520718941.506 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:55:41.893Z,1520718941.893 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:55:42.299Z,1520718942.299 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:55:42.693Z,1520718942.693 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:55:43.081Z,1520718943.081 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:55:43.488Z,1520718943.488 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:55:43.893Z,1520718943.893 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:55:44.288Z,1520718944.288 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:55:44.698Z,1520718944.698 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:55:45.106Z,1520718945.106 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:55:45.504Z,1520718945.504 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:55:45.901Z,1520718945.901 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:55:46.294Z,1520718946.294 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:55:46.696Z,1520718946.696 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:55:47.093Z,1520718947.093 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:55:47.500Z,1520718947.500 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:55:47.887Z,1520718947.887 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:55:48.292Z,1520718948.292 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:55:48.691Z,1520718948.691 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:55:49.103Z,1520718949.103 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:55:49.504Z,1520718949.504 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:55:49.909Z,1520718949.909 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:55:50.287Z,1520718950.287 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:55:50.687Z,1520718950.687 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:55:51.097Z,1520718951.097 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:55:51.493Z,1520718951.493 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:55:51.896Z,1520718951.896 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:55:52.299Z,1520718952.299 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:55:52.688Z,1520718952.688 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:55:53.087Z,1520718953.087 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:55:53.492Z,1520718953.492 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:55:53.894Z,1520718953.894 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:55:54.296Z,1520718954.296 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:55:54.696Z,1520718954.696 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:55:55.085Z,1520718955.085 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:55:55.495Z,1520718955.495 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:55:55.901Z,1520718955.901 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:55:56.301Z,1520718956.301 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:55:56.524Z,1520718956.524 [CBIT](DEBUG): EFC running - data check-sum false
2018-03-10T21:55:56.691Z,1520718956.691 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:55:57.087Z,1520718957.087 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:55:57.481Z,1520718957.481 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:55:57.898Z,1520718957.898 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:55:58.293Z,1520718958.293 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:55:58.688Z,1520718958.688 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:55:59.091Z,1520718959.091 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:55:59.499Z,1520718959.499 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:55:59.897Z,1520718959.897 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:56:00.294Z,1520718960.294 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:56:00.687Z,1520718960.687 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:56:01.085Z,1520718961.085 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:56:01.488Z,1520718961.488 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:56:01.892Z,1520718961.892 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:56:02.295Z,1520718962.295 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:56:02.699Z,1520718962.699 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:56:03.092Z,1520718963.092 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:56:03.497Z,1520718963.497 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:56:03.898Z,1520718963.898 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:56:04.294Z,1520718964.294 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:56:04.697Z,1520718964.697 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:56:05.097Z,1520718965.097 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:56:05.501Z,1520718965.501 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:56:05.886Z,1520718965.886 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:56:06.300Z,1520718966.300 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:56:06.699Z,1520718966.699 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:56:07.093Z,1520718967.093 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:56:07.487Z,1520718967.487 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:56:07.887Z,1520718967.887 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:56:08.284Z,1520718968.284 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:56:08.691Z,1520718968.691 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:56:09.091Z,1520718969.091 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:56:09.492Z,1520718969.492 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:56:09.898Z,1520718969.898 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:56:10.297Z,1520718970.297 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:56:10.687Z,1520718970.687 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:56:11.092Z,1520718971.092 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:56:11.498Z,1520718971.498 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:56:11.895Z,1520718971.895 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:56:12.287Z,1520718972.287 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:56:12.692Z,1520718972.692 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:56:13.104Z,1520718973.104 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:56:13.496Z,1520718973.496 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:56:13.896Z,1520718973.896 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:56:14.293Z,1520718974.293 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:56:14.692Z,1520718974.692 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:56:15.101Z,1520718975.101 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:56:15.497Z,1520718975.497 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:56:15.902Z,1520718975.902 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:56:16.274Z,1520718976.274 [NAL9602](INFO): SBD MO Status=2, MOMSN=5850, MT Status=2, MTMSN=0
2018-03-10T21:56:16.274Z,1520718976.274 [NAL9602](ERROR): Failed to initiate SBD session. Error code: 2
2018-03-10T21:56:16.296Z,1520718976.296 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:56:16.701Z,1520718976.701 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:56:17.099Z,1520718977.099 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:56:17.492Z,1520718977.492 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:56:22.514Z,1520718982.514 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:56:22.664Z,1520718982.664 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:56:23.016Z,1520718983.016 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:56:23.422Z,1520718983.422 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:56:23.833Z,1520718983.833 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:56:24.225Z,1520718984.225 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:56:24.606Z,1520718984.606 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:56:25.016Z,1520718985.016 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:56:25.419Z,1520718985.419 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:56:25.816Z,1520718985.816 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:56:26.215Z,1520718986.215 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:56:26.607Z,1520718986.607 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:56:27.007Z,1520718987.007 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:56:27.416Z,1520718987.416 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:56:27.812Z,1520718987.812 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:56:28.218Z,1520718988.218 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:56:28.629Z,1520718988.629 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:56:29.020Z,1520718989.020 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:56:29.407Z,1520718989.407 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:56:29.812Z,1520718989.812 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:56:30.220Z,1520718990.220 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:56:30.615Z,1520718990.615 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:56:31.012Z,1520718991.012 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:56:31.407Z,1520718991.407 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:56:31.815Z,1520718991.815 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:56:32.216Z,1520718992.216 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:56:32.627Z,1520718992.627 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:56:33.016Z,1520718993.016 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:56:33.407Z,1520718993.407 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:56:33.807Z,1520718993.807 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:56:34.216Z,1520718994.216 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:56:34.627Z,1520718994.627 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:56:35.016Z,1520718995.016 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:56:35.420Z,1520718995.420 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:56:35.816Z,1520718995.816 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:56:36.222Z,1520718996.222 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:56:36.607Z,1520718996.607 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:56:37.016Z,1520718997.016 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:56:37.418Z,1520718997.418 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:56:37.819Z,1520718997.819 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:56:38.221Z,1520718998.221 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:56:38.615Z,1520718998.615 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:56:38.990Z,1520718998.990 [NAL9602](INFO): SBD MO Status=0, MOMSN=5850, MT Status=0, MTMSN=0
2018-03-10T21:56:38.990Z,1520718998.990 [NAL9602](INFO): No messages in MT queue
2018-03-10T21:56:39.009Z,1520718999.009 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:56:39.408Z,1520718999.408 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:56:39.822Z,1520718999.822 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:56:40.218Z,1520719000.218 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:56:40.628Z,1520719000.628 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:56:41.017Z,1520719001.017 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:56:41.412Z,1520719001.412 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:56:41.816Z,1520719001.816 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:56:42.224Z,1520719002.224 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:56:42.630Z,1520719002.630 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:56:43.026Z,1520719003.026 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:56:43.416Z,1520719003.416 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:56:43.815Z,1520719003.815 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:56:44.215Z,1520719004.215 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:56:44.627Z,1520719004.627 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:56:45.007Z,1520719005.007 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:56:45.426Z,1520719005.426 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:56:45.826Z,1520719005.826 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:56:46.218Z,1520719006.218 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:56:46.619Z,1520719006.619 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:56:47.013Z,1520719007.013 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:56:47.417Z,1520719007.417 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:56:47.824Z,1520719007.824 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:56:48.222Z,1520719008.222 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:56:48.636Z,1520719008.636 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:56:49.018Z,1520719009.018 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:56:49.425Z,1520719009.425 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:56:49.821Z,1520719009.821 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:56:50.206Z,1520719010.206 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:56:50.609Z,1520719010.609 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:56:51.009Z,1520719011.009 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:56:51.423Z,1520719011.423 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:56:51.822Z,1520719011.822 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:56:52.227Z,1520719012.227 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:56:52.621Z,1520719012.621 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:56:53.022Z,1520719013.022 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:56:53.417Z,1520719013.417 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:56:53.819Z,1520719013.819 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:56:54.239Z,1520719014.239 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:56:54.622Z,1520719014.622 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:56:55.024Z,1520719015.024 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:56:55.413Z,1520719015.413 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:56:55.807Z,1520719015.807 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:56:56.207Z,1520719016.207 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:56:56.616Z,1520719016.616 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:56:57.016Z,1520719017.016 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:56:57.438Z,1520719017.438 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:56:57.829Z,1520719017.829 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:56:58.225Z,1520719018.225 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:56:58.612Z,1520719018.612 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:56:59.013Z,1520719019.013 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:56:59.422Z,1520719019.422 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:56:59.816Z,1520719019.816 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:57:00.225Z,1520719020.225 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:57:00.617Z,1520719020.617 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:57:01.021Z,1520719021.021 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:57:01.422Z,1520719021.422 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:57:01.815Z,1520719021.815 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:57:02.214Z,1520719022.214 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:57:02.619Z,1520719022.619 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:57:03.012Z,1520719023.012 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:57:03.434Z,1520719023.434 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:57:03.830Z,1520719023.830 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:57:04.222Z,1520719024.222 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:57:04.611Z,1520719024.611 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:57:05.020Z,1520719025.020 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:57:05.417Z,1520719025.417 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:57:05.819Z,1520719025.819 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:57:06.231Z,1520719026.231 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:57:06.630Z,1520719026.630 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:57:07.026Z,1520719027.026 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:57:07.419Z,1520719027.419 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:57:07.815Z,1520719027.815 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:57:08.207Z,1520719028.207 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:57:08.628Z,1520719028.628 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:57:09.007Z,1520719029.007 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:57:09.426Z,1520719029.426 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:57:09.826Z,1520719029.826 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:57:10.224Z,1520719030.224 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:57:10.621Z,1520719030.621 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:57:11.015Z,1520719031.015 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:57:11.416Z,1520719031.416 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:57:11.819Z,1520719031.819 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:57:12.226Z,1520719032.226 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:57:12.628Z,1520719032.628 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:57:13.034Z,1520719033.034 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:57:13.408Z,1520719033.408 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:57:13.811Z,1520719033.811 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:57:14.220Z,1520719034.220 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:57:14.627Z,1520719034.627 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:57:15.016Z,1520719035.016 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:57:15.428Z,1520719035.428 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:57:15.826Z,1520719035.826 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:57:16.226Z,1520719036.226 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:57:16.616Z,1520719036.616 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:57:17.026Z,1520719037.026 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:57:17.416Z,1520719037.416 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:57:17.807Z,1520719037.807 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:57:18.222Z,1520719038.222 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:57:18.626Z,1520719038.626 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:57:23.663Z,1520719043.663 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:57:23.817Z,1520719043.817 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:57:24.216Z,1520719044.216 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:57:24.611Z,1520719044.611 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:57:25.007Z,1520719045.007 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:57:25.417Z,1520719045.417 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:57:25.821Z,1520719045.821 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:57:25.858Z,1520719045.858 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T21:57:25.858Z,1520719045.858 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 7
2018-03-10T21:57:25.858Z,1520719045.858 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-10T21:57:25.903Z,1520719045.903 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-10T21:57:26.218Z,1520719046.218 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:57:26.281Z,1520719046.281 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-10T21:57:26.281Z,1520719046.281 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 7
2018-03-10T21:57:26.603Z,1520719046.603 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:57:26.664Z,1520719046.664 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-10T21:57:26.664Z,1520719046.664 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-10T21:57:26.665Z,1520719046.665 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-10T21:57:27.002Z,1520719047.002 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:57:27.404Z,1520719047.404 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:57:27.802Z,1520719047.802 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:57:28.217Z,1520719048.217 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:57:28.618Z,1520719048.618 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:57:29.020Z,1520719049.020 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:57:29.417Z,1520719049.417 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:57:29.801Z,1520719049.801 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:57:30.203Z,1520719050.203 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:57:30.622Z,1520719050.622 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:57:31.004Z,1520719051.004 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:57:31.422Z,1520719051.422 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:57:31.821Z,1520719051.821 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:57:32.214Z,1520719052.214 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:57:32.612Z,1520719052.612 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:57:33.010Z,1520719053.010 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:57:33.404Z,1520719053.404 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:57:33.808Z,1520719053.808 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:57:34.227Z,1520719054.227 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:57:34.622Z,1520719054.622 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:57:35.018Z,1520719055.018 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:57:35.406Z,1520719055.406 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:57:35.811Z,1520719055.811 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:57:36.212Z,1520719056.212 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:57:36.611Z,1520719056.611 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:57:37.010Z,1520719057.010 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:57:37.424Z,1520719057.424 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:57:37.826Z,1520719057.826 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:57:38.214Z,1520719058.214 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:57:38.613Z,1520719058.613 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:57:39.016Z,1520719059.016 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:57:39.404Z,1520719059.404 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:57:39.803Z,1520719059.803 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:57:40.222Z,1520719060.222 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:57:40.611Z,1520719060.611 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:57:41.026Z,1520719061.026 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:57:41.405Z,1520719061.405 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:57:41.803Z,1520719061.803 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:57:42.217Z,1520719062.217 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:57:42.605Z,1520719062.605 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:57:43.000Z,1520719063.000 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:57:43.414Z,1520719063.414 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:57:43.832Z,1520719063.832 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:57:44.219Z,1520719064.219 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:57:44.612Z,1520719064.612 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:57:45.012Z,1520719065.012 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:57:45.416Z,1520719065.416 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:57:45.815Z,1520719065.815 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:57:46.228Z,1520719066.228 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:57:46.629Z,1520719066.629 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:57:47.025Z,1520719067.025 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:57:47.410Z,1520719067.410 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:57:47.816Z,1520719067.816 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:57:48.211Z,1520719068.211 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:57:48.616Z,1520719068.616 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:57:49.011Z,1520719069.011 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:57:49.423Z,1520719069.423 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:57:49.818Z,1520719069.818 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:57:50.219Z,1520719070.219 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:57:50.611Z,1520719070.611 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:57:51.011Z,1520719071.011 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:57:51.414Z,1520719071.414 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:57:51.821Z,1520719071.821 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:57:52.226Z,1520719072.226 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:57:52.626Z,1520719072.626 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:57:53.018Z,1520719073.018 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:57:53.407Z,1520719073.407 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:57:53.816Z,1520719073.816 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:57:54.213Z,1520719074.213 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:57:54.614Z,1520719074.614 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:57:55.010Z,1520719075.010 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:57:55.424Z,1520719075.424 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:57:55.827Z,1520719075.827 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:57:56.223Z,1520719076.223 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:57:56.604Z,1520719076.604 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:57:57.006Z,1520719077.006 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:57:57.408Z,1520719077.408 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:57:57.821Z,1520719077.821 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:57:58.224Z,1520719078.224 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:57:58.622Z,1520719078.622 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:57:59.021Z,1520719079.021 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:57:59.408Z,1520719079.408 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:57:59.811Z,1520719079.811 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:58:00.209Z,1520719080.209 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:58:00.620Z,1520719080.620 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:58:01.021Z,1520719081.021 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:58:01.424Z,1520719081.424 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:58:01.824Z,1520719081.824 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:58:02.218Z,1520719082.218 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:58:02.616Z,1520719082.616 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:58:03.011Z,1520719083.011 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:58:03.422Z,1520719083.422 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:58:03.811Z,1520719083.811 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:58:04.237Z,1520719084.237 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:58:04.625Z,1520719084.625 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:58:05.022Z,1520719085.022 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:58:05.421Z,1520719085.421 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:58:05.803Z,1520719085.803 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:58:06.212Z,1520719086.212 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:58:06.610Z,1520719086.610 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:58:07.008Z,1520719087.008 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:58:07.429Z,1520719087.429 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:58:07.826Z,1520719087.826 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:58:08.226Z,1520719088.226 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:58:08.608Z,1520719088.608 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:58:09.013Z,1520719089.013 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:58:09.425Z,1520719089.425 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:58:09.817Z,1520719089.817 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:58:10.215Z,1520719090.215 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:58:10.622Z,1520719090.622 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:58:11.022Z,1520719091.022 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:58:11.403Z,1520719091.403 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:58:11.804Z,1520719091.804 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:58:12.202Z,1520719092.202 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:58:12.603Z,1520719092.603 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:58:13.012Z,1520719093.012 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:58:13.417Z,1520719093.417 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:58:13.825Z,1520719093.825 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:58:14.225Z,1520719094.225 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:58:14.603Z,1520719094.603 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:58:15.002Z,1520719095.002 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:58:15.412Z,1520719095.412 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:58:15.813Z,1520719095.813 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:58:16.224Z,1520719096.224 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:58:16.629Z,1520719096.629 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:58:17.017Z,1520719097.017 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:58:17.416Z,1520719097.416 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:58:17.818Z,1520719097.818 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:58:22.710Z,1520719102.710 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:58:22.928Z,1520719102.928 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:58:23.288Z,1520719103.288 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:58:23.674Z,1520719103.674 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:58:24.074Z,1520719104.074 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:58:24.476Z,1520719104.476 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:58:24.867Z,1520719104.867 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:58:25.273Z,1520719105.273 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:58:25.672Z,1520719105.672 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:58:26.072Z,1520719106.072 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:58:26.461Z,1520719106.461 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:58:26.860Z,1520719106.860 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:58:27.262Z,1520719107.262 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:58:27.660Z,1520719107.660 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:58:28.065Z,1520719108.065 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:58:28.474Z,1520719108.474 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:58:28.873Z,1520719108.873 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:58:29.300Z,1520719109.300 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:58:29.654Z,1520719109.654 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:58:30.066Z,1520719110.066 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:58:30.464Z,1520719110.464 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:58:30.862Z,1520719110.862 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:58:31.275Z,1520719111.275 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:58:31.680Z,1520719111.680 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:58:32.068Z,1520719112.068 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:58:32.462Z,1520719112.462 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:58:32.860Z,1520719112.860 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:58:33.258Z,1520719113.258 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:58:33.652Z,1520719113.652 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:58:34.062Z,1520719114.062 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:58:34.473Z,1520719114.473 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:58:34.866Z,1520719114.866 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:58:35.272Z,1520719115.272 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:58:35.686Z,1520719115.686 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:58:36.076Z,1520719116.076 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:58:36.469Z,1520719116.469 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:58:36.852Z,1520719116.852 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:58:37.271Z,1520719117.271 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:58:37.670Z,1520719117.670 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:58:38.071Z,1520719118.071 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:58:38.460Z,1520719118.460 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:58:38.868Z,1520719118.868 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:58:39.260Z,1520719119.260 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:58:39.656Z,1520719119.656 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:58:40.051Z,1520719120.051 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:58:40.472Z,1520719120.472 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:58:40.874Z,1520719120.874 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:58:41.265Z,1520719121.265 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:58:41.660Z,1520719121.660 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:58:42.079Z,1520719122.079 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:58:42.480Z,1520719122.480 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:58:42.852Z,1520719122.852 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:58:43.277Z,1520719123.277 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:58:43.675Z,1520719123.675 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:58:44.087Z,1520719124.087 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:58:44.456Z,1520719124.456 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:58:44.859Z,1520719124.859 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:58:45.276Z,1520719125.276 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:58:45.690Z,1520719125.690 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:58:46.079Z,1520719126.079 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:58:46.471Z,1520719126.471 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:58:46.865Z,1520719126.865 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:58:47.270Z,1520719127.270 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:58:47.697Z,1520719127.697 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:58:48.073Z,1520719128.073 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:58:48.512Z,1520719128.512 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:58:48.889Z,1520719128.889 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:58:49.272Z,1520719129.272 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:58:49.670Z,1520719129.670 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:58:50.073Z,1520719130.073 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:58:50.471Z,1520719130.471 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:58:50.855Z,1520719130.855 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:58:51.253Z,1520719131.253 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:58:51.656Z,1520719131.656 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:58:52.062Z,1520719132.062 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:58:52.469Z,1520719132.469 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:58:52.866Z,1520719132.866 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:58:53.278Z,1520719133.278 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:58:53.654Z,1520719133.654 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:58:54.056Z,1520719134.056 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:58:54.451Z,1520719134.451 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:58:54.865Z,1520719134.865 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:58:55.260Z,1520719135.260 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:58:55.700Z,1520719135.700 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:58:56.076Z,1520719136.076 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:58:56.503Z,1520719136.503 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:58:56.895Z,1520719136.895 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:58:57.281Z,1520719137.281 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:58:57.681Z,1520719137.681 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:58:58.102Z,1520719138.102 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:58:58.493Z,1520719138.493 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:58:58.876Z,1520719138.876 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:58:59.287Z,1520719139.287 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:58:59.659Z,1520719139.659 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:59:00.064Z,1520719140.064 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:59:00.465Z,1520719140.465 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:59:00.870Z,1520719140.870 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:59:01.263Z,1520719141.263 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:59:01.670Z,1520719141.670 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:59:02.120Z,1520719142.120 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:59:02.472Z,1520719142.472 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:59:02.896Z,1520719142.896 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:59:03.330Z,1520719143.330 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:59:03.668Z,1520719143.668 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:59:04.079Z,1520719144.079 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:59:04.568Z,1520719144.568 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:59:04.874Z,1520719144.874 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:59:05.260Z,1520719145.260 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:59:05.723Z,1520719145.723 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:59:06.060Z,1520719146.060 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:59:06.468Z,1520719146.468 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:59:06.924Z,1520719146.924 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:59:07.270Z,1520719147.270 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:59:07.665Z,1520719147.665 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:59:08.096Z,1520719148.096 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:59:08.465Z,1520719148.465 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:59:08.867Z,1520719148.867 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:59:09.293Z,1520719149.293 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:59:09.700Z,1520719149.700 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:59:10.074Z,1520719150.074 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:59:10.472Z,1520719150.472 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:59:10.864Z,1520719150.864 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:59:11.264Z,1520719151.264 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:59:11.666Z,1520719151.666 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:59:12.051Z,1520719152.051 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:59:12.472Z,1520719152.472 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:59:12.872Z,1520719152.872 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:59:13.266Z,1520719153.266 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:59:13.700Z,1520719153.700 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:59:14.061Z,1520719154.061 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:59:14.481Z,1520719154.481 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:59:14.897Z,1520719154.897 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:59:15.270Z,1520719155.270 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:59:15.677Z,1520719155.677 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:59:16.130Z,1520719156.130 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:59:16.460Z,1520719156.460 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:59:16.879Z,1520719156.879 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:59:17.396Z,1520719157.396 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:59:17.697Z,1520719157.697 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:59:18.081Z,1520719158.081 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:59:18.542Z,1520719158.542 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:59:18.902Z,1520719158.902 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:59:28.786Z,1520719168.786 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:59:28.900Z,1520719168.900 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-03-10T21:54:22.2Z
2018-03-10T21:59:28.901Z,1520719168.901 [Default:CheckIn:Read_GPS] Stopped
2018-03-10T21:59:28.901Z,1520719168.901 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-03-10T21:59:29.064Z,1520719169.064 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:59:30.503Z,1520719170.503 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:59:30.764Z,1520719170.764 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:59:31.150Z,1520719171.150 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:59:31.630Z,1520719171.630 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:59:37.360Z,1520719177.360 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:59:37.564Z,1520719177.564 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20180310T051512/Courier0396.lzma
2018-03-10T21:59:37.615Z,1520719177.615 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:59:37.998Z,1520719177.998 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:59:38.322Z,1520719178.322 [DataOverHttps](INFO): Moved sent file to Logs/20180310T051512/Courier0396.lzma.bak
2018-03-10T21:59:38.323Z,1520719178.323 [DataOverHttps](INFO): SBD MOMSN=8008770
2018-03-10T21:59:38.382Z,1520719178.382 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:59:39.301Z,1520719179.301 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:59:39.468Z,1520719179.468 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:59:44.999Z,1520719184.999 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:59:45.147Z,1520719185.147 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:59:45.508Z,1520719185.508 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:59:45.904Z,1520719185.904 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:59:46.309Z,1520719186.309 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:59:46.704Z,1520719186.704 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:59:47.100Z,1520719187.100 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:59:53.210Z,1520719193.210 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:59:53.417Z,1520719193.417 [DataOverHttps](INFO): Sending 246 bytes from file Logs/20180310T051512/Express0397.lzma
2018-03-10T21:59:53.440Z,1520719193.440 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:59:53.811Z,1520719193.811 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:59:54.190Z,1520719194.190 [DataOverHttps](INFO): Moved sent file to Logs/20180310T051512/Express0397.lzma.bak
2018-03-10T21:59:54.190Z,1520719194.190 [DataOverHttps](INFO): SBD MOMSN=8008772
2018-03-10T21:59:54.261Z,1520719194.261 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:59:55.054Z,1520719195.054 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T21:59:55.132Z,1520719195.132 [Default:CheckIn:Read_Iridium] Stopped
2018-03-10T21:59:55.132Z,1520719195.132 [Default:CheckIn:C.Wait] Running Loop=1
2018-03-10T21:59:55.132Z,1520719195.132 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-03-10T21:59:55.243Z,1520719195.243 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:00:01.345Z,1520719201.345 [NAL9602](INFO): Powering down
2018-03-10T22:00:01.400Z,1520719201.400 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:00:01.596Z,1520719201.596 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:00:01.938Z,1520719201.938 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:00:02.381Z,1520719202.381 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:00:02.753Z,1520719202.753 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:00:03.197Z,1520719203.197 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:00:03.538Z,1520719203.538 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:00:03.974Z,1520719203.974 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:00:04.392Z,1520719204.392 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:00:04.741Z,1520719204.741 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:00:05.165Z,1520719205.165 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:00:05.552Z,1520719205.552 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:00:05.940Z,1520719205.940 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:00:06.356Z,1520719206.356 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:00:06.738Z,1520719206.738 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:00:07.138Z,1520719207.138 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:00:07.545Z,1520719207.545 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:00:07.982Z,1520719207.982 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:00:08.392Z,1520719208.392 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:00:08.777Z,1520719208.777 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:00:09.168Z,1520719209.168 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:00:09.538Z,1520719209.538 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:00:09.941Z,1520719209.941 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:00:10.339Z,1520719210.339 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:00:10.781Z,1520719210.781 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:00:11.148Z,1520719211.148 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:00:11.572Z,1520719211.572 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:00:11.938Z,1520719211.938 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:00:12.358Z,1520719212.358 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:00:12.762Z,1520719212.762 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:00:13.149Z,1520719213.149 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:00:13.561Z,1520719213.561 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:00:13.952Z,1520719213.952 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:00:14.360Z,1520719214.360 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:00:14.752Z,1520719214.752 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:00:15.147Z,1520719215.147 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:00:15.538Z,1520719215.538 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:00:15.938Z,1520719215.938 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:00:16.362Z,1520719216.362 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:00:16.767Z,1520719216.767 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:00:17.140Z,1520719217.140 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:00:17.583Z,1520719217.583 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:00:17.955Z,1520719217.955 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:00:18.400Z,1520719218.400 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:00:18.745Z,1520719218.745 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:00:19.165Z,1520719219.165 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:00:19.584Z,1520719219.584 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:00:19.939Z,1520719219.939 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:00:20.338Z,1520719220.338 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:00:20.739Z,1520719220.739 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:00:21.152Z,1520719221.152 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:00:21.564Z,1520719221.564 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:00:21.949Z,1520719221.949 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:00:22.346Z,1520719222.346 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:00:22.739Z,1520719222.739 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:00:23.140Z,1520719223.140 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:00:23.599Z,1520719223.599 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:00:23.943Z,1520719223.943 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:00:24.355Z,1520719224.355 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:00:24.780Z,1520719224.780 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:00:25.176Z,1520719225.176 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:00:25.536Z,1520719225.536 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:00:25.938Z,1520719225.938 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:00:26.337Z,1520719226.337 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:00:26.736Z,1520719226.736 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:00:26.808Z,1520719226.808 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T22:00:26.808Z,1520719226.808 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 8
2018-03-10T22:00:26.808Z,1520719226.808 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-10T22:00:26.821Z,1520719226.821 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-10T22:00:27.136Z,1520719227.136 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:00:27.193Z,1520719227.193 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-10T22:00:27.193Z,1520719227.193 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 8
2018-03-10T22:00:27.539Z,1520719227.539 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:00:27.573Z,1520719227.573 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-10T22:00:27.574Z,1520719227.574 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-10T22:00:27.574Z,1520719227.574 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-10T22:00:27.938Z,1520719227.938 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:00:28.375Z,1520719228.375 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:00:28.772Z,1520719228.772 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:00:29.165Z,1520719229.165 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:00:29.578Z,1520719229.578 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:00:29.950Z,1520719229.950 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:00:30.347Z,1520719230.347 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:00:30.738Z,1520719230.738 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:00:31.136Z,1520719231.136 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:00:31.542Z,1520719231.542 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:00:31.938Z,1520719231.938 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:00:32.349Z,1520719232.349 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:00:32.731Z,1520719232.731 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:00:33.145Z,1520719233.145 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:00:33.538Z,1520719233.538 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:00:33.939Z,1520719233.939 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:00:34.352Z,1520719234.352 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:00:34.738Z,1520719234.738 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:00:35.138Z,1520719235.138 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:00:35.547Z,1520719235.547 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:00:35.958Z,1520719235.958 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:00:36.354Z,1520719236.354 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:00:36.740Z,1520719236.740 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:00:37.151Z,1520719237.151 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:00:37.538Z,1520719237.538 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:00:37.945Z,1520719237.945 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:00:38.338Z,1520719238.338 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:00:38.799Z,1520719238.799 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:00:39.156Z,1520719239.156 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:00:39.538Z,1520719239.538 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:00:39.938Z,1520719239.938 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:00:40.394Z,1520719240.394 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:00:40.773Z,1520719240.773 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:00:41.138Z,1520719241.138 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:00:41.561Z,1520719241.561 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:00:41.941Z,1520719241.941 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:00:42.331Z,1520719242.331 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:00:42.765Z,1520719242.765 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:00:43.138Z,1520719243.138 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:00:43.536Z,1520719243.536 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:00:43.956Z,1520719243.956 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:00:44.347Z,1520719244.347 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:00:44.747Z,1520719244.747 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:00:45.155Z,1520719245.155 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:00:45.549Z,1520719245.549 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:00:45.936Z,1520719245.936 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:00:46.360Z,1520719246.360 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:00:46.797Z,1520719246.797 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:00:47.139Z,1520719247.139 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:00:47.539Z,1520719247.539 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:00:47.938Z,1520719247.938 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:00:48.349Z,1520719248.349 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:00:48.777Z,1520719248.777 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:00:49.156Z,1520719249.156 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:00:49.570Z,1520719249.570 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:00:49.939Z,1520719249.939 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:00:50.356Z,1520719250.356 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:00:50.757Z,1520719250.757 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:00:51.138Z,1520719251.138 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:00:51.539Z,1520719251.539 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:00:51.942Z,1520719251.942 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:00:52.352Z,1520719252.352 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:00:52.749Z,1520719252.749 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:00:53.148Z,1520719253.148 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:00:53.552Z,1520719253.552 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:00:53.938Z,1520719253.938 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:00:54.333Z,1520719254.333 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:00:54.738Z,1520719254.738 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:00:55.140Z,1520719255.140 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:00:55.538Z,1520719255.538 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:01:00.459Z,1520719260.459 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:01:00.613Z,1520719260.613 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:01:00.991Z,1520719260.991 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:01:01.396Z,1520719261.396 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:01:01.791Z,1520719261.791 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:01:02.188Z,1520719262.188 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:01:02.592Z,1520719262.592 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:01:02.993Z,1520719262.993 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:01:03.392Z,1520719263.392 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:01:03.778Z,1520719263.778 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:01:04.187Z,1520719264.187 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:01:04.591Z,1520719264.591 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:01:04.985Z,1520719264.985 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:01:05.393Z,1520719265.393 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:01:05.787Z,1520719265.787 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:01:06.179Z,1520719266.179 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:01:06.578Z,1520719266.578 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:01:06.978Z,1520719266.978 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:01:07.378Z,1520719267.378 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:01:07.780Z,1520719267.780 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:01:08.188Z,1520719268.188 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:01:08.586Z,1520719268.586 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:01:08.981Z,1520719268.981 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:01:09.397Z,1520719269.397 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:01:09.778Z,1520719269.778 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:01:10.178Z,1520719270.178 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:01:10.578Z,1520719270.578 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:01:10.990Z,1520719270.990 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:01:11.379Z,1520719271.379 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:01:11.788Z,1520719271.788 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:01:12.206Z,1520719272.206 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:01:12.593Z,1520719272.593 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:01:12.984Z,1520719272.984 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:01:13.378Z,1520719273.378 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:01:13.779Z,1520719273.779 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:01:14.179Z,1520719274.179 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:01:14.587Z,1520719274.587 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:01:14.991Z,1520719274.991 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:01:15.388Z,1520719275.388 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:01:15.794Z,1520719275.794 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:01:16.185Z,1520719276.185 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:01:16.587Z,1520719276.587 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:01:16.987Z,1520719276.987 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:01:17.392Z,1520719277.392 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:01:17.779Z,1520719277.779 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:01:18.179Z,1520719278.179 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:01:18.579Z,1520719278.579 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:01:18.988Z,1520719278.988 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:01:19.386Z,1520719279.386 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:01:19.777Z,1520719279.777 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:01:20.178Z,1520719280.178 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:01:20.582Z,1520719280.582 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:01:20.989Z,1520719280.989 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:01:21.386Z,1520719281.386 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:01:21.798Z,1520719281.798 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:01:22.176Z,1520719282.176 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:01:22.583Z,1520719282.583 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:01:22.979Z,1520719282.979 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:01:23.390Z,1520719283.390 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:01:23.794Z,1520719283.794 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:01:24.186Z,1520719284.186 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:01:24.586Z,1520719284.586 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:01:24.992Z,1520719284.992 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:01:25.383Z,1520719285.383 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:01:25.780Z,1520719285.780 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:01:26.183Z,1520719286.183 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:01:26.585Z,1520719286.585 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:01:26.991Z,1520719286.991 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:01:27.394Z,1520719287.394 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:01:27.786Z,1520719287.786 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:01:28.178Z,1520719288.178 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:01:28.579Z,1520719288.579 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:01:28.991Z,1520719288.991 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:01:29.383Z,1520719289.383 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:01:29.792Z,1520719289.792 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:01:30.186Z,1520719290.186 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:01:30.593Z,1520719290.593 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:01:30.991Z,1520719290.991 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:01:31.378Z,1520719291.378 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:01:31.783Z,1520719291.783 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:01:32.189Z,1520719292.189 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:01:32.590Z,1520719292.590 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:01:32.972Z,1520719292.972 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:01:33.383Z,1520719293.383 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:01:33.779Z,1520719293.779 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:01:34.200Z,1520719294.200 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:01:34.593Z,1520719294.593 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:01:34.978Z,1520719294.978 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:01:35.379Z,1520719295.379 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:01:35.778Z,1520719295.778 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:01:36.179Z,1520719296.179 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:01:36.583Z,1520719296.583 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:01:36.989Z,1520719296.989 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:01:37.388Z,1520719297.388 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:01:37.778Z,1520719297.778 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:01:38.178Z,1520719298.178 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:01:38.583Z,1520719298.583 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:01:38.986Z,1520719298.986 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:01:39.400Z,1520719299.400 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:01:39.784Z,1520719299.784 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:01:40.187Z,1520719300.187 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:01:40.590Z,1520719300.590 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:01:40.987Z,1520719300.987 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:01:41.378Z,1520719301.378 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:01:41.788Z,1520719301.788 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:01:42.198Z,1520719302.198 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:01:42.576Z,1520719302.576 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:01:42.992Z,1520719302.992 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:01:43.378Z,1520719303.378 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:01:43.778Z,1520719303.778 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:01:44.179Z,1520719304.179 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:01:44.593Z,1520719304.593 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:01:44.986Z,1520719304.986 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:01:45.386Z,1520719305.386 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:01:45.785Z,1520719305.785 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:01:46.191Z,1520719306.191 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:01:46.578Z,1520719306.578 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:01:46.980Z,1520719306.980 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:01:47.378Z,1520719307.378 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:01:47.783Z,1520719307.783 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:01:48.187Z,1520719308.187 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:01:48.579Z,1520719308.579 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:01:48.987Z,1520719308.987 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:01:49.393Z,1520719309.393 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:01:49.787Z,1520719309.787 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:01:50.184Z,1520719310.184 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:01:50.584Z,1520719310.584 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:01:50.978Z,1520719310.978 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:01:51.379Z,1520719311.379 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:01:51.780Z,1520719311.780 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:01:52.193Z,1520719312.193 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:01:52.591Z,1520719312.591 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:01:52.986Z,1520719312.986 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:01:53.397Z,1520719313.397 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:01:53.800Z,1520719313.800 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:01:54.179Z,1520719314.179 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:01:54.579Z,1520719314.579 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:01:54.995Z,1520719314.995 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:01:55.387Z,1520719315.387 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:01:55.787Z,1520719315.787 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:02:00.737Z,1520719320.737 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:02:00.791Z,1520719320.791 [BPC1](ERROR): Failed to receive battery data
2018-03-10T22:02:00.791Z,1520719320.791 [BPC1] Communications Fault, FailCount= 1
2018-03-10T22:02:00.792Z,1520719320.792 [BPC1](ERROR): Communications Fault
2018-03-10T22:02:00.822Z,1520719320.822 [CBIT](ERROR): Communications Fault in component: BPC1
2018-03-10T22:02:00.941Z,1520719320.941 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:02:01.288Z,1520719321.288 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:02:01.658Z,1520719321.658 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:02:01.745Z,1520719321.745 [CBIT](INFO): Clearing failed state for component BPC1
2018-03-10T22:02:01.745Z,1520719321.745 [BPC1] No Fault, FailCount= 1
2018-03-10T22:02:02.061Z,1520719322.061 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:02:02.468Z,1520719322.468 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:02:02.868Z,1520719322.868 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:02:03.266Z,1520719323.266 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:02:03.672Z,1520719323.672 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:02:04.068Z,1520719324.068 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:02:04.462Z,1520719324.462 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:02:04.873Z,1520719324.873 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:02:05.275Z,1520719325.275 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:02:05.677Z,1520719325.677 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:02:06.077Z,1520719326.077 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:02:06.457Z,1520719326.457 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:02:06.867Z,1520719326.867 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:02:07.258Z,1520719327.258 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:02:07.672Z,1520719327.672 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:02:08.059Z,1520719328.059 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:02:08.462Z,1520719328.462 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:02:08.861Z,1520719328.861 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:02:09.262Z,1520719329.262 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:02:09.664Z,1520719329.664 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:02:10.072Z,1520719330.072 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:02:10.468Z,1520719330.468 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:02:10.871Z,1520719330.871 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:02:11.258Z,1520719331.258 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:02:11.668Z,1520719331.668 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:02:12.077Z,1520719332.077 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:02:12.458Z,1520719332.458 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:02:12.887Z,1520719332.887 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:02:13.262Z,1520719333.262 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:02:13.659Z,1520719333.659 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:02:14.064Z,1520719334.064 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:02:14.467Z,1520719334.467 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:02:14.863Z,1520719334.863 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:02:15.299Z,1520719335.299 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:02:15.668Z,1520719335.668 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:02:16.063Z,1520719336.063 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:02:16.471Z,1520719336.471 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:02:16.871Z,1520719336.871 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:02:17.258Z,1520719337.258 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:02:17.658Z,1520719337.658 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:02:18.063Z,1520719338.063 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:02:18.466Z,1520719338.466 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:02:18.866Z,1520719338.866 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:02:19.283Z,1520719339.283 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:02:19.664Z,1520719339.664 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:02:20.068Z,1520719340.068 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:02:20.458Z,1520719340.458 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:02:20.858Z,1520719340.858 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:02:21.267Z,1520719341.267 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:02:21.669Z,1520719341.669 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:02:22.061Z,1520719342.061 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:02:22.458Z,1520719342.458 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:02:22.872Z,1520719342.872 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:02:23.259Z,1520719343.259 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:02:23.658Z,1520719343.658 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:02:24.063Z,1520719344.063 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:02:24.477Z,1520719344.477 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:02:24.867Z,1520719344.867 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:02:25.268Z,1520719345.268 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:02:25.680Z,1520719345.680 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:02:26.072Z,1520719346.072 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:02:26.464Z,1520719346.464 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:02:26.860Z,1520719346.860 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:02:27.271Z,1520719347.271 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:02:27.685Z,1520719347.685 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:02:28.067Z,1520719348.067 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:02:28.458Z,1520719348.458 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:02:28.859Z,1520719348.859 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:02:29.262Z,1520719349.262 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:02:29.670Z,1520719349.670 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:02:30.066Z,1520719350.066 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:02:30.466Z,1520719350.466 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:02:30.873Z,1520719350.873 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:02:31.264Z,1520719351.264 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:02:31.656Z,1520719351.656 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:02:32.083Z,1520719352.083 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:02:32.475Z,1520719352.475 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:02:32.491Z,1520719352.491 [BPC1](FAULT): Failed to initialize
2018-03-10T22:02:32.492Z,1520719352.492 [BPC1] Communications Fault, FailCount= 2
2018-03-10T22:02:32.492Z,1520719352.492 [BPC1](ERROR): Communications Fault
2018-03-10T22:02:32.579Z,1520719352.579 [CBIT](ERROR): Communications Fault in component: BPC1
2018-03-10T22:02:32.874Z,1520719352.874 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:02:33.264Z,1520719353.264 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:02:33.668Z,1520719353.668 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:02:33.751Z,1520719353.751 [CBIT](INFO): Clearing failed state for component BPC1
2018-03-10T22:02:33.752Z,1520719353.752 [BPC1] No Fault, FailCount= 2
2018-03-10T22:02:34.059Z,1520719354.059 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:02:34.469Z,1520719354.469 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:02:34.863Z,1520719354.863 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:02:35.266Z,1520719355.266 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:02:35.674Z,1520719355.674 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:02:36.071Z,1520719356.071 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:02:36.473Z,1520719356.473 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:02:36.859Z,1520719356.859 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:02:37.262Z,1520719357.262 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:02:37.660Z,1520719357.660 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:02:38.059Z,1520719358.059 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:02:38.478Z,1520719358.478 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:02:38.862Z,1520719358.862 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:02:39.270Z,1520719359.270 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:02:39.665Z,1520719359.665 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:02:40.066Z,1520719360.066 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:02:40.472Z,1520719360.472 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:02:40.864Z,1520719360.864 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:02:41.259Z,1520719361.259 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:02:41.664Z,1520719361.664 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:02:42.085Z,1520719362.085 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:02:42.468Z,1520719362.468 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:02:42.858Z,1520719362.858 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:02:43.259Z,1520719363.259 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:02:43.662Z,1520719363.662 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:02:44.064Z,1520719364.064 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:02:44.468Z,1520719364.468 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:02:44.885Z,1520719364.885 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:02:45.269Z,1520719365.269 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:02:45.667Z,1520719365.667 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:02:46.068Z,1520719366.068 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:02:46.470Z,1520719366.470 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:02:46.877Z,1520719366.877 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:02:47.268Z,1520719367.268 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:02:47.659Z,1520719367.659 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:02:48.064Z,1520719368.064 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:02:48.477Z,1520719368.477 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:02:48.858Z,1520719368.858 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:02:49.261Z,1520719369.261 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:02:49.668Z,1520719369.668 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:02:50.059Z,1520719370.059 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:02:50.483Z,1520719370.483 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:02:50.858Z,1520719370.858 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:02:51.289Z,1520719371.289 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:02:51.682Z,1520719371.682 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:02:52.060Z,1520719372.060 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:02:52.462Z,1520719372.462 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:02:52.871Z,1520719372.871 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:02:53.275Z,1520719373.275 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:02:53.670Z,1520719373.670 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:02:54.058Z,1520719374.058 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:02:54.458Z,1520719374.458 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:02:54.856Z,1520719374.856 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:02:55.261Z,1520719375.261 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:02:55.666Z,1520719375.666 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:02:56.061Z,1520719376.061 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:03:01.095Z,1520719381.095 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:03:01.264Z,1520719381.264 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:03:01.651Z,1520719381.651 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:03:02.040Z,1520719382.040 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:03:02.452Z,1520719382.452 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:03:02.834Z,1520719382.834 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:03:03.235Z,1520719383.235 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:03:03.646Z,1520719383.646 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:03:04.051Z,1520719384.051 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:03:04.449Z,1520719384.449 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:03:04.468Z,1520719384.468 [BPC1](FAULT): Failed to initialize
2018-03-10T22:03:04.468Z,1520719384.468 [BPC1] Communications Fault, FailCount= 3
2018-03-10T22:03:04.468Z,1520719384.468 [BPC1](ERROR): Communications Fault
2018-03-10T22:03:04.566Z,1520719384.566 [CBIT](ERROR): Communications Fault in component: BPC1
2018-03-10T22:03:04.859Z,1520719384.859 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:03:05.238Z,1520719385.238 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:03:05.640Z,1520719385.640 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:03:05.710Z,1520719385.710 [CBIT](INFO): Clearing failed state for component BPC1
2018-03-10T22:03:05.710Z,1520719385.710 [BPC1] No Fault, FailCount= 3
2018-03-10T22:03:06.035Z,1520719386.035 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:03:06.446Z,1520719386.446 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:03:06.837Z,1520719386.837 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:03:07.250Z,1520719387.250 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:03:07.646Z,1520719387.646 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:03:08.032Z,1520719388.032 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:03:08.441Z,1520719388.441 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:03:08.843Z,1520719388.843 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:03:09.240Z,1520719389.240 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:03:09.641Z,1520719389.641 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:03:10.052Z,1520719390.052 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:03:10.438Z,1520719390.438 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:03:10.835Z,1520719390.835 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:03:11.267Z,1520719391.267 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:03:11.643Z,1520719391.643 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:03:12.052Z,1520719392.052 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:03:12.458Z,1520719392.458 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:03:12.848Z,1520719392.848 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:03:13.238Z,1520719393.238 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:03:13.641Z,1520719393.641 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:03:14.034Z,1520719394.034 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:03:14.438Z,1520719394.438 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:03:14.848Z,1520719394.848 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:03:15.242Z,1520719395.242 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:03:15.644Z,1520719395.644 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:03:16.051Z,1520719396.051 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:03:16.446Z,1520719396.446 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:03:16.845Z,1520719396.845 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:03:17.240Z,1520719397.240 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:03:17.664Z,1520719397.664 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:03:18.051Z,1520719398.051 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:03:18.446Z,1520719398.446 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:03:18.845Z,1520719398.845 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:03:19.237Z,1520719399.237 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:03:19.638Z,1520719399.638 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:03:20.044Z,1520719400.044 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:03:20.439Z,1520719400.439 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:03:20.843Z,1520719400.843 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:03:21.243Z,1520719401.243 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:03:21.646Z,1520719401.646 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:03:22.050Z,1520719402.050 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:03:22.448Z,1520719402.448 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:03:22.836Z,1520719402.836 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:03:23.244Z,1520719403.244 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:03:23.642Z,1520719403.642 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:03:24.053Z,1520719404.053 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:03:24.461Z,1520719404.461 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:03:24.844Z,1520719404.844 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:03:25.238Z,1520719405.238 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:03:25.647Z,1520719405.647 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:03:26.047Z,1520719406.047 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:03:26.445Z,1520719406.445 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:03:26.845Z,1520719406.845 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:03:27.246Z,1520719407.246 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:03:27.635Z,1520719407.635 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:03:27.686Z,1520719407.686 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T22:03:27.686Z,1520719407.686 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 9
2018-03-10T22:03:27.686Z,1520719407.686 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-10T22:03:27.731Z,1520719407.731 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-10T22:03:28.050Z,1520719408.050 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:03:28.132Z,1520719408.132 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-10T22:03:28.133Z,1520719408.133 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 9
2018-03-10T22:03:28.434Z,1520719408.434 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:03:28.476Z,1520719408.476 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-10T22:03:28.476Z,1520719408.476 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-10T22:03:28.477Z,1520719408.477 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-10T22:03:28.836Z,1520719408.836 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:03:29.242Z,1520719409.242 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:03:29.651Z,1520719409.651 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:03:30.028Z,1520719410.028 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:03:30.444Z,1520719410.444 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:03:30.874Z,1520719410.874 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:03:31.247Z,1520719411.247 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:03:31.649Z,1520719411.649 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:03:32.047Z,1520719412.047 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:03:32.438Z,1520719412.438 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:03:32.840Z,1520719412.840 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:03:33.235Z,1520719413.235 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:03:33.632Z,1520719413.632 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:03:34.048Z,1520719414.048 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:03:34.447Z,1520719414.447 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:03:34.840Z,1520719414.840 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:03:35.256Z,1520719415.256 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:03:35.645Z,1520719415.645 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:03:36.039Z,1520719416.039 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:03:36.444Z,1520719416.444 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:03:36.457Z,1520719416.457 [BPC1](FAULT): Failed to initialize
2018-03-10T22:03:36.457Z,1520719416.457 [BPC1] Communications Fault, FailCount= 4
2018-03-10T22:03:36.457Z,1520719416.457 [BPC1](ERROR): Communications Fault
2018-03-10T22:03:36.578Z,1520719416.578 [CBIT](ERROR): Communications Fault in component: BPC1
2018-03-10T22:03:36.835Z,1520719416.835 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:03:37.275Z,1520719417.275 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:03:37.661Z,1520719417.661 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:03:37.736Z,1520719417.736 [CBIT](INFO): Clearing failed state for component BPC1
2018-03-10T22:03:37.736Z,1520719417.736 [BPC1] No Fault, FailCount= 4
2018-03-10T22:03:38.034Z,1520719418.034 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:03:38.435Z,1520719418.435 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:03:38.848Z,1520719418.848 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:03:39.239Z,1520719419.239 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:03:39.641Z,1520719419.641 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:03:40.050Z,1520719420.050 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:03:40.447Z,1520719420.447 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:03:40.835Z,1520719420.835 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:03:41.234Z,1520719421.234 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:03:41.640Z,1520719421.640 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:03:42.038Z,1520719422.038 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:03:42.454Z,1520719422.454 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:03:42.842Z,1520719422.842 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:03:43.246Z,1520719423.246 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:03:43.658Z,1520719423.658 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:03:44.044Z,1520719424.044 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:03:44.434Z,1520719424.434 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:03:44.864Z,1520719424.864 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:03:45.246Z,1520719425.246 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:03:45.639Z,1520719425.639 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:03:46.050Z,1520719426.050 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:03:46.447Z,1520719426.447 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:03:46.838Z,1520719426.838 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:03:47.240Z,1520719427.240 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:03:47.634Z,1520719427.634 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:03:48.041Z,1520719428.041 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:03:48.449Z,1520719428.449 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:03:48.847Z,1520719428.847 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:03:49.232Z,1520719429.232 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:03:49.646Z,1520719429.646 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:03:50.076Z,1520719430.076 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:03:50.449Z,1520719430.449 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:03:50.840Z,1520719430.840 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:03:51.244Z,1520719431.244 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:03:51.649Z,1520719431.649 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:03:52.055Z,1520719432.055 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:03:52.443Z,1520719432.443 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:03:52.833Z,1520719432.833 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:03:53.244Z,1520719433.244 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:03:53.641Z,1520719433.641 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:03:54.036Z,1520719434.036 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:03:54.444Z,1520719434.444 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:03:54.847Z,1520719434.847 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:03:55.246Z,1520719435.246 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:03:55.651Z,1520719435.651 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:03:56.035Z,1520719436.035 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:03:56.476Z,1520719436.476 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:03:56.840Z,1520719436.840 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:03:57.241Z,1520719437.241 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:03:57.647Z,1520719437.647 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:03:58.048Z,1520719438.048 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:04:02.969Z,1520719442.969 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:04:03.105Z,1520719443.105 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:04:03.496Z,1520719443.496 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:04:03.890Z,1520719443.890 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:04:04.304Z,1520719444.304 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:04:04.691Z,1520719444.691 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:04:05.096Z,1520719445.096 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:04:05.496Z,1520719445.496 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:04:05.903Z,1520719445.903 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:04:06.296Z,1520719446.296 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:04:06.693Z,1520719446.693 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:04:07.091Z,1520719447.091 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:04:07.494Z,1520719447.494 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:04:07.902Z,1520719447.902 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:04:08.297Z,1520719448.297 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:04:08.698Z,1520719448.698 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:04:09.091Z,1520719449.091 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:04:09.496Z,1520719449.496 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:04:09.905Z,1520719449.905 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:04:10.301Z,1520719450.301 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:04:10.690Z,1520719450.690 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:04:11.090Z,1520719451.090 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:04:11.499Z,1520719451.499 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:04:11.906Z,1520719451.906 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:04:12.298Z,1520719452.298 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:04:12.689Z,1520719452.689 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:04:13.101Z,1520719453.101 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:04:13.505Z,1520719453.505 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:04:13.888Z,1520719453.888 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:04:14.305Z,1520719454.305 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:04:14.696Z,1520719454.696 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:04:15.104Z,1520719455.104 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:04:15.507Z,1520719455.507 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:04:15.898Z,1520719455.898 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:04:16.290Z,1520719456.290 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:04:16.700Z,1520719456.700 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:04:17.126Z,1520719457.126 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:04:17.501Z,1520719457.501 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:04:17.934Z,1520719457.934 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:04:18.307Z,1520719458.307 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:04:18.708Z,1520719458.708 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:04:19.106Z,1520719459.106 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:04:19.503Z,1520719459.503 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:04:19.908Z,1520719459.908 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:04:20.302Z,1520719460.302 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:04:20.738Z,1520719460.738 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:04:21.205Z,1520719461.205 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:04:21.528Z,1520719461.528 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:04:21.922Z,1520719461.922 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:04:22.314Z,1520719462.314 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:04:22.696Z,1520719462.696 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:04:23.096Z,1520719463.096 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:04:23.498Z,1520719463.498 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:04:23.905Z,1520719463.905 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:04:24.299Z,1520719464.299 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:04:24.687Z,1520719464.687 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:04:25.095Z,1520719465.095 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:04:25.507Z,1520719465.507 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:04:25.896Z,1520719465.896 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:04:26.299Z,1520719466.299 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:04:26.690Z,1520719466.690 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:04:27.090Z,1520719467.090 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:04:27.496Z,1520719467.496 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:04:27.898Z,1520719467.898 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:04:28.295Z,1520719468.295 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:04:28.704Z,1520719468.704 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:04:29.100Z,1520719469.100 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:04:29.498Z,1520719469.498 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:04:29.902Z,1520719469.902 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:04:30.297Z,1520719470.297 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:04:30.706Z,1520719470.706 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:04:31.097Z,1520719471.097 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:04:31.498Z,1520719471.498 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:04:31.896Z,1520719471.896 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:04:32.301Z,1520719472.301 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:04:32.698Z,1520719472.698 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:04:33.096Z,1520719473.096 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:04:33.490Z,1520719473.490 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:04:33.894Z,1520719473.894 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:04:34.290Z,1520719474.290 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:04:34.699Z,1520719474.699 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:04:35.098Z,1520719475.098 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:04:35.499Z,1520719475.499 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:04:35.900Z,1520719475.900 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:04:36.298Z,1520719476.298 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:04:36.696Z,1520719476.696 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:04:37.090Z,1520719477.090 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:04:37.490Z,1520719477.490 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:04:37.890Z,1520719477.890 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:04:38.299Z,1520719478.299 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:04:38.695Z,1520719478.695 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:04:39.084Z,1520719479.084 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:04:39.500Z,1520719479.500 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:04:39.898Z,1520719479.898 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:04:40.298Z,1520719480.298 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:04:40.691Z,1520719480.691 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:04:41.099Z,1520719481.099 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:04:41.502Z,1520719481.502 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:04:41.898Z,1520719481.898 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:04:42.290Z,1520719482.290 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:04:42.690Z,1520719482.690 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:04:43.091Z,1520719483.091 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:04:43.490Z,1520719483.490 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:04:43.910Z,1520719483.910 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:04:44.297Z,1520719484.297 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:04:44.707Z,1520719484.707 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:04:45.089Z,1520719485.089 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:04:45.493Z,1520719485.493 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:04:45.891Z,1520719485.891 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:04:46.295Z,1520719486.295 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:04:46.712Z,1520719486.712 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:04:47.100Z,1520719487.100 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:04:47.490Z,1520719487.490 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:04:47.900Z,1520719487.900 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:04:48.298Z,1520719488.298 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:04:48.690Z,1520719488.690 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:04:49.100Z,1520719489.100 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:04:49.498Z,1520719489.498 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:04:49.896Z,1520719489.896 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:04:50.290Z,1520719490.290 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:04:50.697Z,1520719490.697 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:04:51.098Z,1520719491.098 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:04:51.504Z,1520719491.504 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:04:51.896Z,1520719491.896 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:04:52.303Z,1520719492.303 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:04:52.691Z,1520719492.691 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:04:53.096Z,1520719493.096 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:04:53.491Z,1520719493.491 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:04:53.900Z,1520719493.900 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:04:54.299Z,1520719494.299 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:04:54.698Z,1520719494.698 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:04:55.096Z,1520719495.096 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:04:55.494Z,1520719495.494 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:04:55.574Z,1520719495.574 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-03-10T22:04:55.574Z,1520719495.574 [Default:CheckIn:C.Wait] Stopped
2018-03-10T22:04:55.574Z,1520719495.574 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-03-10T22:04:55.574Z,1520719495.574 [Default:CheckIn:D] Running Loop=1
2018-03-10T22:04:55.895Z,1520719495.895 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:04:55.976Z,1520719495.976 [Default:CheckIn:D] Stopped
2018-03-10T22:04:55.976Z,1520719495.976 [Default:CheckIn:E] Running Loop=1
2018-03-10T22:04:56.311Z,1520719496.311 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:04:56.363Z,1520719496.363 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1005.634245 min 
2018-03-10T22:04:56.363Z,1520719496.363 [Default:CheckIn:E] Stopped
2018-03-10T22:04:56.371Z,1520719496.371 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-03-10T22:04:56.371Z,1520719496.371 [Default:CheckIn] Stopped
2018-03-10T22:04:56.371Z,1520719496.371 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-03-10T22:04:56.372Z,1520719496.372 [Default:CheckIn](INFO): Running loop #100
2018-03-10T22:04:56.372Z,1520719496.372 [Default:CheckIn] Running Loop=100
2018-03-10T22:04:56.372Z,1520719496.372 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-03-10T22:04:56.372Z,1520719496.372 [Default:CheckIn:Read_GPS] Running Loop=1
2018-03-10T22:04:56.690Z,1520719496.690 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:04:57.067Z,1520719497.067 [NAL9602](INFO): Powering up
2018-03-10T22:04:57.086Z,1520719497.086 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:04:57.496Z,1520719497.496 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:04:57.898Z,1520719497.898 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:04:58.300Z,1520719498.300 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:05:03.247Z,1520719503.247 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:05:03.378Z,1520719503.378 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:05:03.768Z,1520719503.768 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:05:04.170Z,1520719504.170 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:05:04.576Z,1520719504.576 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:05:04.972Z,1520719504.972 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:05:05.375Z,1520719505.375 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:05:05.775Z,1520719505.775 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:05:06.177Z,1520719506.177 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:05:06.574Z,1520719506.574 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:05:06.990Z,1520719506.990 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:05:07.367Z,1520719507.367 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:05:07.782Z,1520719507.782 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:05:08.157Z,1520719508.157 [NAL9602](INFO): NAL9602 initialized
2018-03-10T22:05:08.176Z,1520719508.176 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:05:08.576Z,1520719508.576 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:05:08.985Z,1520719508.985 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:05:09.388Z,1520719509.388 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:05:09.788Z,1520719509.788 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:05:10.167Z,1520719510.167 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:05:10.574Z,1520719510.574 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:05:10.982Z,1520719510.982 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:05:11.372Z,1520719511.372 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:05:11.777Z,1520719511.777 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:05:12.176Z,1520719512.176 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:05:12.580Z,1520719512.580 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:05:12.966Z,1520719512.966 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:05:13.394Z,1520719513.394 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:05:13.787Z,1520719513.787 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:05:14.170Z,1520719514.170 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:05:14.576Z,1520719514.576 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:05:14.974Z,1520719514.974 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:05:15.374Z,1520719515.374 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:05:15.775Z,1520719515.775 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:05:16.167Z,1520719516.167 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:05:16.566Z,1520719516.566 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:05:16.966Z,1520719516.966 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:05:17.367Z,1520719517.367 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:05:17.781Z,1520719517.781 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:05:18.186Z,1520719518.186 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:05:18.580Z,1520719518.580 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:05:18.982Z,1520719518.982 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:05:19.367Z,1520719519.367 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:05:19.767Z,1520719519.767 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:05:20.166Z,1520719520.166 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:05:20.567Z,1520719520.567 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:05:20.972Z,1520719520.972 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:05:21.375Z,1520719521.375 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:05:21.782Z,1520719521.782 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:05:22.192Z,1520719522.192 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:05:22.586Z,1520719522.586 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:05:22.989Z,1520719522.989 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:05:23.378Z,1520719523.378 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:05:23.770Z,1520719523.770 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:05:24.171Z,1520719524.171 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:05:24.574Z,1520719524.574 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:05:24.974Z,1520719524.974 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:05:25.376Z,1520719525.376 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:05:25.775Z,1520719525.775 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:05:26.166Z,1520719526.166 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:05:26.567Z,1520719526.567 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:05:26.968Z,1520719526.968 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:05:27.377Z,1520719527.377 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:05:27.782Z,1520719527.782 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:05:28.182Z,1520719528.182 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:05:28.585Z,1520719528.585 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:05:28.973Z,1520719528.973 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:05:29.379Z,1520719529.379 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:05:29.766Z,1520719529.766 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:05:30.166Z,1520719530.166 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:05:30.577Z,1520719530.577 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:05:30.974Z,1520719530.974 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:05:31.385Z,1520719531.385 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:05:31.779Z,1520719531.779 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:05:32.190Z,1520719532.190 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:05:32.596Z,1520719532.596 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:05:32.986Z,1520719532.986 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:05:33.386Z,1520719533.386 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:05:33.780Z,1520719533.780 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:05:34.174Z,1520719534.174 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:05:34.566Z,1520719534.566 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:05:34.966Z,1520719534.966 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:05:35.368Z,1520719535.368 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:05:35.771Z,1520719535.771 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:05:36.173Z,1520719536.173 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:05:36.567Z,1520719536.567 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:05:36.967Z,1520719536.967 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:05:37.393Z,1520719537.393 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:05:37.792Z,1520719537.792 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:05:38.184Z,1520719538.184 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:05:38.588Z,1520719538.588 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:05:38.977Z,1520719538.977 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:05:39.372Z,1520719539.372 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:05:39.783Z,1520719539.783 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:05:40.167Z,1520719540.167 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:05:40.572Z,1520719540.572 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:05:40.983Z,1520719540.983 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:05:41.375Z,1520719541.375 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:05:41.778Z,1520719541.778 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:05:42.179Z,1520719542.179 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:05:42.566Z,1520719542.566 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:05:42.968Z,1520719542.968 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:05:43.369Z,1520719543.369 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:05:43.777Z,1520719543.777 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:05:44.186Z,1520719544.186 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:05:44.578Z,1520719544.578 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:05:44.966Z,1520719544.966 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:05:45.394Z,1520719545.394 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:05:45.786Z,1520719545.786 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:05:46.172Z,1520719546.172 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:05:46.587Z,1520719546.587 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:05:46.966Z,1520719546.966 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:05:47.367Z,1520719547.367 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:05:47.767Z,1520719547.767 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:05:48.180Z,1520719548.180 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:05:48.573Z,1520719548.573 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:05:48.978Z,1520719548.978 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:05:49.381Z,1520719549.381 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:05:49.767Z,1520719549.767 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:05:50.182Z,1520719550.182 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:05:50.567Z,1520719550.567 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:05:50.985Z,1520719550.985 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:05:51.390Z,1520719551.390 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:05:51.780Z,1520719551.780 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:05:52.178Z,1520719552.178 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:05:52.581Z,1520719552.581 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:05:52.971Z,1520719552.971 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:05:53.372Z,1520719553.372 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:05:53.767Z,1520719553.767 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:05:54.189Z,1520719554.189 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:05:54.586Z,1520719554.586 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:05:54.976Z,1520719554.976 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:05:55.374Z,1520719555.374 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:05:55.776Z,1520719555.776 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:05:56.176Z,1520719556.176 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:05:56.574Z,1520719556.574 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:05:56.631Z,1520719556.631 [CBIT](DEBUG): EFC running - data check-sum false
2018-03-10T22:05:56.968Z,1520719556.968 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:06:02.060Z,1520719562.060 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:06:02.252Z,1520719562.252 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:06:02.644Z,1520719562.644 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:06:03.027Z,1520719563.027 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:06:03.435Z,1520719563.435 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:06:03.831Z,1520719563.831 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:06:04.236Z,1520719564.236 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:06:04.642Z,1520719564.642 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:06:05.028Z,1520719565.028 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:06:05.423Z,1520719565.423 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:06:05.819Z,1520719565.819 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:06:06.227Z,1520719566.227 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:06:06.621Z,1520719566.621 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:06:07.019Z,1520719567.019 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:06:07.426Z,1520719567.426 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:06:07.824Z,1520719567.824 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:06:08.234Z,1520719568.234 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:06:08.632Z,1520719568.632 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:06:09.019Z,1520719569.019 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:06:09.428Z,1520719569.428 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:06:09.829Z,1520719569.829 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:06:10.242Z,1520719570.242 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:06:10.618Z,1520719570.618 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:06:11.023Z,1520719571.023 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:06:11.424Z,1520719571.424 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:06:11.821Z,1520719571.821 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:06:12.228Z,1520719572.228 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:06:12.628Z,1520719572.628 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:06:13.024Z,1520719573.024 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:06:13.432Z,1520719573.432 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:06:13.829Z,1520719573.829 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:06:14.232Z,1520719574.232 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:06:14.632Z,1520719574.632 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:06:15.019Z,1520719575.019 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:06:15.436Z,1520719575.436 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:06:15.827Z,1520719575.827 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:06:16.229Z,1520719576.229 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:06:16.679Z,1520719576.679 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:06:17.075Z,1520719577.075 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:06:17.424Z,1520719577.424 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:06:17.831Z,1520719577.831 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:06:18.218Z,1520719578.218 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:06:18.619Z,1520719578.619 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:06:19.020Z,1520719579.020 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:06:19.419Z,1520719579.419 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:06:19.820Z,1520719579.820 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:06:20.246Z,1520719580.246 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:06:20.623Z,1520719580.623 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:06:21.018Z,1520719581.018 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:06:21.424Z,1520719581.424 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:06:21.818Z,1520719581.818 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:06:22.222Z,1520719582.222 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:06:22.624Z,1520719582.624 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:06:23.029Z,1520719583.029 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:06:23.419Z,1520719583.419 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:06:23.832Z,1520719583.832 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:06:24.217Z,1520719584.217 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:06:24.602Z,1520719584.602 [NAL9602](INFO): SBD MO Status=0, MOMSN=5851, MT Status=0, MTMSN=0
2018-03-10T22:06:24.602Z,1520719584.602 [NAL9602](INFO): No messages in MT queue
2018-03-10T22:06:24.620Z,1520719584.620 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:06:25.024Z,1520719585.024 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:06:25.409Z,1520719585.409 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-03-10T22:06:25.409Z,1520719585.409 [NAL9602] Data Fault, FailCount= 1
2018-03-10T22:06:25.409Z,1520719585.409 [NAL9602](ERROR): Data Fault
2018-03-10T22:06:25.456Z,1520719585.456 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:06:25.601Z,1520719585.601 [CBIT](ERROR): Data Fault in component: NAL9602
2018-03-10T22:06:25.800Z,1520719585.800 [NAL9602](INFO): Powering down
2018-03-10T22:06:25.827Z,1520719585.827 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:06:26.219Z,1520719586.219 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:06:26.627Z,1520719586.627 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:06:26.732Z,1520719586.732 [CBIT](INFO): Clearing failed state for component NAL9602
2018-03-10T22:06:26.732Z,1520719586.732 [NAL9602] No Fault, FailCount= 1
2018-03-10T22:06:27.025Z,1520719587.025 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:06:27.428Z,1520719587.428 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:06:27.827Z,1520719587.827 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:06:28.218Z,1520719588.218 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:06:28.620Z,1520719588.620 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:06:28.674Z,1520719588.674 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T22:06:28.674Z,1520719588.674 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 10
2018-03-10T22:06:28.674Z,1520719588.674 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-10T22:06:28.702Z,1520719588.702 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-10T22:06:29.024Z,1520719589.024 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:06:29.127Z,1520719589.127 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-10T22:06:29.127Z,1520719589.127 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 10
2018-03-10T22:06:29.418Z,1520719589.418 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:06:29.472Z,1520719589.472 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-10T22:06:29.473Z,1520719589.473 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-10T22:06:29.473Z,1520719589.473 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-10T22:06:29.832Z,1520719589.832 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:06:30.219Z,1520719590.219 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:06:30.618Z,1520719590.618 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:06:31.037Z,1520719591.037 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:06:31.418Z,1520719591.418 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:06:31.817Z,1520719591.817 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:06:32.217Z,1520719592.217 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:06:32.628Z,1520719592.628 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:06:33.026Z,1520719593.026 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:06:33.435Z,1520719593.435 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:06:33.824Z,1520719593.824 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:06:34.231Z,1520719594.231 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:06:34.633Z,1520719594.633 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:06:35.029Z,1520719595.029 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:06:35.418Z,1520719595.418 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:06:35.824Z,1520719595.824 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:06:36.224Z,1520719596.224 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:06:36.623Z,1520719596.623 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:06:37.031Z,1520719597.031 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:06:37.432Z,1520719597.432 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:06:37.826Z,1520719597.826 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:06:38.219Z,1520719598.219 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:06:38.641Z,1520719598.641 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:06:39.027Z,1520719599.027 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:06:39.434Z,1520719599.434 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:06:39.821Z,1520719599.821 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:06:40.225Z,1520719600.225 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:06:40.638Z,1520719600.638 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:06:41.024Z,1520719601.024 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:06:41.427Z,1520719601.427 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:06:41.829Z,1520719601.829 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:06:42.228Z,1520719602.228 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:06:42.622Z,1520719602.622 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:06:43.036Z,1520719603.036 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:06:43.425Z,1520719603.425 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:06:43.825Z,1520719603.825 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:06:44.218Z,1520719604.218 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:06:44.619Z,1520719604.619 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:06:45.019Z,1520719605.019 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:06:45.423Z,1520719605.423 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:06:45.830Z,1520719605.830 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:06:46.226Z,1520719606.226 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:06:46.632Z,1520719606.632 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:06:47.023Z,1520719607.023 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:06:47.424Z,1520719607.424 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:06:47.828Z,1520719607.828 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:06:48.226Z,1520719608.226 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:06:48.636Z,1520719608.636 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:06:49.024Z,1520719609.024 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:06:49.434Z,1520719609.434 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:06:49.825Z,1520719609.825 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:06:50.218Z,1520719610.218 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:06:50.618Z,1520719610.618 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:06:51.018Z,1520719611.018 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:06:51.428Z,1520719611.428 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:06:51.826Z,1520719611.826 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:06:52.226Z,1520719612.226 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:06:52.624Z,1520719612.624 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:06:53.018Z,1520719613.018 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:06:53.422Z,1520719613.422 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:06:53.842Z,1520719613.842 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:06:54.223Z,1520719614.223 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:06:54.628Z,1520719614.628 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:06:55.024Z,1520719615.024 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:06:55.418Z,1520719615.418 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:06:55.820Z,1520719615.820 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:06:56.204Z,1520719616.204 [NAL9602](INFO): Powering up NAL9602
2018-03-10T22:06:56.227Z,1520719616.227 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:06:56.626Z,1520719616.626 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:06:57.031Z,1520719617.031 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:07:02.075Z,1520719622.075 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:07:02.244Z,1520719622.244 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:07:02.604Z,1520719622.604 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:07:02.995Z,1520719622.995 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:07:03.400Z,1520719623.400 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:07:03.800Z,1520719623.800 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:07:04.202Z,1520719624.202 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:07:04.592Z,1520719624.592 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:07:04.992Z,1520719624.992 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:07:05.399Z,1520719625.399 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:07:05.794Z,1520719625.794 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:07:06.199Z,1520719626.199 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:07:06.600Z,1520719626.600 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:07:07.011Z,1520719627.011 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:07:07.380Z,1520719627.380 [NAL9602](INFO): NAL9602 initialized
2018-03-10T22:07:07.422Z,1520719627.422 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:07:07.795Z,1520719627.795 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:07:08.216Z,1520719628.216 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:07:08.634Z,1520719628.634 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:07:09.009Z,1520719629.009 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:07:09.404Z,1520719629.404 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:07:09.801Z,1520719629.801 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:07:10.206Z,1520719630.206 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:07:10.595Z,1520719630.595 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:07:11.014Z,1520719631.014 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:07:11.414Z,1520719631.414 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:07:11.813Z,1520719631.813 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:07:12.209Z,1520719632.209 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:07:12.600Z,1520719632.600 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:07:12.995Z,1520719632.995 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:07:13.398Z,1520719633.398 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:07:13.806Z,1520719633.806 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:07:14.206Z,1520719634.206 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:07:14.610Z,1520719634.610 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:07:15.013Z,1520719635.013 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:07:15.395Z,1520719635.395 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:07:15.796Z,1520719635.796 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:07:16.195Z,1520719636.195 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:07:16.598Z,1520719636.598 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:07:17.016Z,1520719637.016 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:07:17.416Z,1520719637.416 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:07:17.814Z,1520719637.814 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:07:18.200Z,1520719638.200 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:07:18.595Z,1520719638.595 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:07:18.000Z,1520719639.000 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:07:19.406Z,1520719639.406 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:07:19.805Z,1520719639.805 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:07:20.214Z,1520719640.214 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:07:20.621Z,1520719640.621 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:07:21.021Z,1520719641.021 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:07:21.406Z,1520719641.406 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:07:21.800Z,1520719641.800 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:07:22.204Z,1520719642.204 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:07:22.603Z,1520719642.603 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:07:23.012Z,1520719643.012 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:07:23.418Z,1520719643.418 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:07:23.812Z,1520719643.812 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:07:24.208Z,1520719644.208 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:07:24.594Z,1520719644.594 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:07:24.995Z,1520719644.995 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:07:25.404Z,1520719645.404 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:07:25.811Z,1520719645.811 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:07:26.217Z,1520719646.217 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:07:26.615Z,1520719646.615 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:07:27.005Z,1520719647.005 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:07:27.403Z,1520719647.403 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:07:27.804Z,1520719647.804 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:07:28.202Z,1520719648.202 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:07:28.610Z,1520719648.610 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:07:29.005Z,1520719649.005 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:07:29.412Z,1520719649.412 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:07:29.809Z,1520719649.809 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:07:30.210Z,1520719650.210 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:07:30.598Z,1520719650.598 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:07:31.008Z,1520719651.008 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:07:31.407Z,1520719651.407 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:07:31.802Z,1520719651.802 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:07:32.212Z,1520719652.212 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:07:32.625Z,1520719652.625 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:07:33.006Z,1520719653.006 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:07:33.400Z,1520719653.400 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:07:33.804Z,1520719653.804 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:07:34.209Z,1520719654.209 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:07:34.604Z,1520719654.604 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:07:34.999Z,1520719654.999 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:07:35.418Z,1520719655.418 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:07:35.817Z,1520719655.817 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:07:36.214Z,1520719656.214 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:07:36.602Z,1520719656.602 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:07:37.006Z,1520719657.006 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:07:37.416Z,1520719657.416 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:07:37.794Z,1520719657.794 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:07:38.216Z,1520719658.216 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:07:38.610Z,1520719658.610 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:07:39.013Z,1520719659.013 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:07:39.406Z,1520719659.406 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:07:39.808Z,1520719659.808 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:07:40.213Z,1520719660.213 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:07:40.614Z,1520719660.614 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:07:40.997Z,1520719660.997 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:07:41.418Z,1520719661.418 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:07:41.814Z,1520719661.814 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:07:42.214Z,1520719662.214 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:07:42.617Z,1520719662.617 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:07:43.006Z,1520719663.006 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:07:43.408Z,1520719663.408 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:07:43.794Z,1520719663.794 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:07:44.216Z,1520719664.216 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:07:44.620Z,1520719664.620 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:07:45.009Z,1520719665.009 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:07:45.416Z,1520719665.416 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:07:45.804Z,1520719665.804 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:07:46.206Z,1520719666.206 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:07:46.608Z,1520719666.608 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:07:47.017Z,1520719667.017 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:07:47.414Z,1520719667.414 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:07:47.806Z,1520719667.806 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:07:48.211Z,1520719668.211 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:07:48.600Z,1520719668.600 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:07:49.007Z,1520719669.007 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:07:49.410Z,1520719669.410 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:07:49.804Z,1520719669.804 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:07:50.205Z,1520719670.205 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:07:50.617Z,1520719670.617 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:07:51.011Z,1520719671.011 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:07:51.402Z,1520719671.402 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:07:51.808Z,1520719671.808 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:07:52.214Z,1520719672.214 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:07:52.595Z,1520719672.595 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:07:53.008Z,1520719673.008 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:07:53.417Z,1520719673.417 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:07:53.813Z,1520719673.813 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:07:54.210Z,1520719674.210 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:07:54.604Z,1520719674.604 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:07:54.996Z,1520719674.996 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:07:55.407Z,1520719675.407 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:07:55.803Z,1520719675.803 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:07:56.213Z,1520719676.213 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:07:56.617Z,1520719676.617 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:07:57.013Z,1520719677.013 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:07:57.395Z,1520719677.395 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:08:02.494Z,1520719682.494 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:08:02.641Z,1520719682.641 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:08:03.042Z,1520719683.042 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:08:03.446Z,1520719683.446 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:08:03.852Z,1520719683.852 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:08:04.235Z,1520719684.235 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:08:04.628Z,1520719684.628 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:08:05.029Z,1520719685.029 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:08:05.428Z,1520719685.428 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:08:05.847Z,1520719685.847 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:08:06.248Z,1520719686.248 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:08:06.648Z,1520719686.648 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:08:07.031Z,1520719687.031 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:08:07.426Z,1520719687.426 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:08:07.845Z,1520719687.845 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:08:08.227Z,1520719688.227 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:08:08.646Z,1520719688.646 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:08:09.052Z,1520719689.052 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:08:09.444Z,1520719689.444 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:08:09.834Z,1520719689.834 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:08:10.227Z,1520719690.227 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:08:10.636Z,1520719690.636 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:08:11.040Z,1520719691.040 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:08:11.433Z,1520719691.433 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:08:11.846Z,1520719691.846 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:08:12.252Z,1520719692.252 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:08:12.646Z,1520719692.646 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:08:13.025Z,1520719693.025 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:08:13.446Z,1520719693.446 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:08:13.833Z,1520719693.833 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:08:14.243Z,1520719694.243 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:08:14.698Z,1520719694.698 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:08:15.049Z,1520719695.049 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:08:15.436Z,1520719695.436 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:08:15.838Z,1520719695.838 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:08:16.237Z,1520719696.237 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:08:16.658Z,1520719696.658 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:08:17.046Z,1520719697.046 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:08:17.439Z,1520719697.439 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:08:17.840Z,1520719697.840 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:08:18.277Z,1520719698.277 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:08:18.662Z,1520719698.662 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:08:19.071Z,1520719699.071 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:08:19.441Z,1520719699.441 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:08:19.856Z,1520719699.856 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:08:20.250Z,1520719700.250 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:08:20.643Z,1520719700.643 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:08:21.046Z,1520719701.046 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:08:21.427Z,1520719701.427 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:08:21.828Z,1520719701.828 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:08:22.236Z,1520719702.236 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:08:22.645Z,1520719702.645 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:08:23.053Z,1520719703.053 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:08:23.450Z,1520719703.450 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:08:23.832Z,1520719703.832 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:08:24.234Z,1520719704.234 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:08:24.640Z,1520719704.640 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:08:25.027Z,1520719705.027 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:08:25.442Z,1520719705.442 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:08:25.827Z,1520719705.827 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:08:26.244Z,1520719706.244 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:08:26.649Z,1520719706.649 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:08:27.038Z,1520719707.038 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:08:27.427Z,1520719707.427 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:08:27.829Z,1520719707.829 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:08:28.237Z,1520719708.237 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:08:28.645Z,1520719708.645 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:08:29.049Z,1520719709.049 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:08:29.450Z,1520719709.450 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:08:29.832Z,1520719709.832 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:08:30.226Z,1520719710.226 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:08:30.645Z,1520719710.645 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:08:31.037Z,1520719711.037 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:08:31.444Z,1520719711.444 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:08:31.854Z,1520719711.854 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:08:32.244Z,1520719712.244 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:08:32.644Z,1520719712.644 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:08:33.027Z,1520719713.027 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:08:33.445Z,1520719713.445 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:08:33.834Z,1520719713.834 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:08:34.244Z,1520719714.244 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:08:34.649Z,1520719714.649 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:08:35.040Z,1520719715.040 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:08:35.428Z,1520719715.428 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:08:35.826Z,1520719715.826 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:08:36.240Z,1520719716.240 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:08:36.652Z,1520719716.652 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:08:37.027Z,1520719717.027 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:08:37.447Z,1520719717.447 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:08:37.854Z,1520719717.854 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:08:38.242Z,1520719718.242 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:08:38.626Z,1520719718.626 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:08:39.036Z,1520719719.036 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:08:39.437Z,1520719719.437 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:08:39.826Z,1520719719.826 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:08:40.247Z,1520719720.247 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:08:40.642Z,1520719720.642 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:08:41.037Z,1520719721.037 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:08:41.439Z,1520719721.439 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:08:41.834Z,1520719721.834 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:08:42.244Z,1520719722.244 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:08:42.642Z,1520719722.642 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:08:43.027Z,1520719723.027 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:08:43.446Z,1520719723.446 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:08:43.850Z,1520719723.850 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:08:44.252Z,1520719724.252 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:08:44.627Z,1520719724.627 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:08:45.040Z,1520719725.040 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:08:45.435Z,1520719725.435 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:08:45.834Z,1520719725.834 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:08:46.252Z,1520719726.252 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:08:46.648Z,1520719726.648 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:08:47.050Z,1520719727.050 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:08:47.442Z,1520719727.442 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:08:47.836Z,1520719727.836 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:08:48.233Z,1520719728.233 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:08:48.656Z,1520719728.656 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:08:49.027Z,1520719729.027 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:08:49.444Z,1520719729.444 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:08:49.849Z,1520719729.849 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:08:50.242Z,1520719730.242 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:08:50.639Z,1520719730.639 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:08:51.036Z,1520719731.036 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:08:51.446Z,1520719731.446 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:08:51.835Z,1520719731.835 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:08:52.248Z,1520719732.248 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:08:52.649Z,1520719732.649 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:08:53.042Z,1520719733.042 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:08:53.446Z,1520719733.446 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:08:53.829Z,1520719733.829 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:08:54.226Z,1520719734.226 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:08:54.632Z,1520719734.632 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:08:55.027Z,1520719735.027 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:08:55.441Z,1520719735.441 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:08:55.846Z,1520719735.846 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:08:56.244Z,1520719736.244 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:08:56.626Z,1520719736.626 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:08:57.027Z,1520719737.027 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:08:57.437Z,1520719737.437 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:09:02.586Z,1520719742.586 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:09:02.761Z,1520719742.761 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:09:03.114Z,1520719743.114 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:09:03.522Z,1520719743.522 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:09:03.904Z,1520719743.904 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:09:04.309Z,1520719744.309 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:09:04.716Z,1520719744.716 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:09:05.104Z,1520719745.104 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:09:05.517Z,1520719745.517 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:09:05.913Z,1520719745.913 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:09:06.317Z,1520719746.317 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:09:06.699Z,1520719746.699 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:09:07.112Z,1520719747.112 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:09:07.522Z,1520719747.522 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:09:07.906Z,1520719747.906 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:09:08.318Z,1520719748.318 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:09:08.721Z,1520719748.721 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:09:09.117Z,1520719749.117 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:09:09.511Z,1520719749.511 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:09:09.912Z,1520719749.912 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:09:10.316Z,1520719750.316 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:09:10.717Z,1520719750.717 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:09:11.107Z,1520719751.107 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:09:11.518Z,1520719751.518 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:09:11.928Z,1520719751.928 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:09:12.327Z,1520719752.327 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:09:12.705Z,1520719752.705 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:09:13.112Z,1520719753.112 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:09:13.514Z,1520719753.514 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:09:13.898Z,1520719753.898 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:09:14.320Z,1520719754.320 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:09:14.722Z,1520719754.722 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:09:15.116Z,1520719755.116 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:09:15.514Z,1520719755.514 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:09:15.910Z,1520719755.910 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:09:16.307Z,1520719756.307 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:09:16.718Z,1520719756.718 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:09:17.109Z,1520719757.109 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:09:17.516Z,1520719757.516 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:09:17.920Z,1520719757.920 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:09:18.318Z,1520719758.318 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:09:18.703Z,1520719758.703 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:09:19.113Z,1520719759.113 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:09:19.566Z,1520719759.566 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:09:19.920Z,1520719759.920 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:09:20.318Z,1520719760.318 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:09:20.742Z,1520719760.742 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:09:21.111Z,1520719761.111 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:09:21.506Z,1520719761.506 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:09:21.905Z,1520719761.905 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:09:22.333Z,1520719762.333 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:09:22.759Z,1520719762.759 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:09:23.130Z,1520719763.130 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:09:23.572Z,1520719763.572 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:09:23.922Z,1520719763.922 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:09:24.314Z,1520719764.314 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:09:24.702Z,1520719764.702 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:09:25.129Z,1520719765.129 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:09:25.504Z,1520719765.504 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:09:25.913Z,1520719765.913 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:09:26.318Z,1520719766.318 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:09:26.718Z,1520719766.718 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:09:27.118Z,1520719767.118 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:09:27.506Z,1520719767.506 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:09:27.908Z,1520719767.908 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:09:28.322Z,1520719768.322 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:09:28.712Z,1520719768.712 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:09:29.100Z,1520719769.100 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:09:29.625Z,1520719769.625 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:09:29.729Z,1520719769.729 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T22:09:29.729Z,1520719769.729 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 11
2018-03-10T22:09:29.729Z,1520719769.729 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-10T22:09:29.797Z,1520719769.797 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-10T22:09:29.921Z,1520719769.921 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:09:30.021Z,1520719770.021 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-10T22:09:30.021Z,1520719770.021 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 11
2018-03-10T22:09:30.321Z,1520719770.321 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:09:30.339Z,1520719770.339 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-10T22:09:30.340Z,1520719770.340 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-10T22:09:30.340Z,1520719770.340 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-10T22:09:30.708Z,1520719770.708 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:09:31.107Z,1520719771.107 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:09:31.518Z,1520719771.518 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:09:31.907Z,1520719771.907 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:09:32.318Z,1520719772.318 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:09:32.724Z,1520719772.724 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:09:33.122Z,1520719773.122 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:09:33.500Z,1520719773.500 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:09:33.908Z,1520719773.908 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:09:34.309Z,1520719774.309 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:09:34.718Z,1520719774.718 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:09:35.124Z,1520719775.124 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:09:35.516Z,1520719775.516 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:09:35.932Z,1520719775.932 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:09:36.318Z,1520719776.318 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:09:36.704Z,1520719776.704 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:09:37.108Z,1520719777.108 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:09:37.527Z,1520719777.527 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:09:37.904Z,1520719777.904 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:09:38.309Z,1520719778.309 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:09:38.717Z,1520719778.717 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:09:39.122Z,1520719779.122 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:09:39.512Z,1520719779.512 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:09:39.904Z,1520719779.904 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:09:40.312Z,1520719780.312 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:09:40.720Z,1520719780.720 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:09:41.119Z,1520719781.119 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:09:41.516Z,1520719781.516 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:09:41.920Z,1520719781.920 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:09:42.318Z,1520719782.318 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:09:42.699Z,1520719782.699 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:09:43.102Z,1520719783.102 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:09:43.508Z,1520719783.508 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:09:43.912Z,1520719783.912 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:09:44.317Z,1520719784.317 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:09:44.714Z,1520719784.714 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:09:45.117Z,1520719785.117 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:09:45.499Z,1520719785.499 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:09:45.912Z,1520719785.912 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:09:46.309Z,1520719786.309 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:09:46.707Z,1520719786.707 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:09:47.104Z,1520719787.104 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:09:47.521Z,1520719787.521 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:09:47.914Z,1520719787.914 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:09:48.323Z,1520719788.323 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:09:48.699Z,1520719788.699 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:09:49.099Z,1520719789.099 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:09:49.503Z,1520719789.503 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:09:49.904Z,1520719789.904 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:09:50.318Z,1520719790.318 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:09:50.717Z,1520719790.717 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:09:51.114Z,1520719791.114 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:09:51.507Z,1520719791.507 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:09:51.904Z,1520719791.904 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:09:52.312Z,1520719792.312 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:09:52.713Z,1520719792.713 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:09:53.107Z,1520719793.107 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:09:53.522Z,1520719793.522 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:09:53.923Z,1520719793.923 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:09:54.317Z,1520719794.317 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:09:54.708Z,1520719794.708 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:09:55.103Z,1520719795.103 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:09:55.507Z,1520719795.507 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:09:55.912Z,1520719795.912 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:09:56.325Z,1520719796.325 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:09:56.385Z,1520719796.385 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-03-10T22:04:56.4Z
2018-03-10T22:09:56.385Z,1520719796.385 [Default:CheckIn:Read_GPS] Stopped
2018-03-10T22:09:56.385Z,1520719796.385 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-03-10T22:09:56.730Z,1520719796.730 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:09:57.635Z,1520719797.635 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:09:57.804Z,1520719797.804 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:10:02.776Z,1520719802.776 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:10:02.932Z,1520719802.932 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:10:03.299Z,1520719803.299 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20180310T051512/Courier0400.lzma
2018-03-10T22:10:03.351Z,1520719803.351 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:10:03.714Z,1520719803.714 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:10:04.094Z,1520719804.094 [DataOverHttps](INFO): Moved sent file to Logs/20180310T051512/Courier0400.lzma.bak
2018-03-10T22:10:04.095Z,1520719804.095 [DataOverHttps](INFO): SBD MOMSN=8008849
2018-03-10T22:10:04.136Z,1520719804.136 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:10:07.481Z,1520719807.481 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:10:07.652Z,1520719807.652 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:10:08.031Z,1520719808.031 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:10:13.036Z,1520719813.036 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:10:13.240Z,1520719813.240 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:10:13.624Z,1520719813.624 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:10:14.006Z,1520719814.006 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:10:14.416Z,1520719814.416 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:10:14.805Z,1520719814.805 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:10:15.198Z,1520719815.198 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:10:15.598Z,1520719815.598 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:10:15.998Z,1520719815.998 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:10:16.399Z,1520719816.399 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:10:16.799Z,1520719816.799 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:10:21.913Z,1520719821.913 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:10:22.102Z,1520719822.102 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:10:22.472Z,1520719822.472 [DataOverHttps](INFO): Sending 195 bytes from file Logs/20180310T051512/Express0401.lzma
2018-03-10T22:10:22.524Z,1520719822.524 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:10:22.886Z,1520719822.886 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:10:23.266Z,1520719823.266 [DataOverHttps](INFO): Moved sent file to Logs/20180310T051512/Express0401.lzma.bak
2018-03-10T22:10:23.267Z,1520719823.267 [DataOverHttps](INFO): SBD MOMSN=8008851
2018-03-10T22:10:23.340Z,1520719823.340 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:10:24.163Z,1520719824.163 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:10:24.192Z,1520719824.192 [Default:CheckIn:Read_Iridium] Stopped
2018-03-10T22:10:24.192Z,1520719824.192 [Default:CheckIn:C.Wait] Running Loop=1
2018-03-10T22:10:24.192Z,1520719824.192 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-03-10T22:10:24.315Z,1520719824.315 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:10:29.395Z,1520719829.395 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:10:29.570Z,1520719829.570 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:10:29.952Z,1520719829.952 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:10:30.334Z,1520719830.334 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:10:30.768Z,1520719830.768 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:10:31.134Z,1520719831.134 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:10:31.538Z,1520719831.538 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:10:31.945Z,1520719831.945 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:10:32.351Z,1520719832.351 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:10:32.741Z,1520719832.741 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:10:33.116Z,1520719833.116 [NAL9602](INFO): Powering down
2018-03-10T22:10:33.169Z,1520719833.169 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:10:33.540Z,1520719833.540 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:10:33.938Z,1520719833.938 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:10:34.342Z,1520719834.342 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:10:34.753Z,1520719834.753 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:10:35.142Z,1520719835.142 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:10:35.528Z,1520719835.528 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:10:35.934Z,1520719835.934 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:10:36.376Z,1520719836.376 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:10:36.764Z,1520719836.764 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:10:37.135Z,1520719837.135 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:10:37.534Z,1520719837.534 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:10:37.934Z,1520719837.934 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:10:38.340Z,1520719838.340 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:10:38.742Z,1520719838.742 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:10:39.152Z,1520719839.152 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:10:39.545Z,1520719839.545 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:10:39.941Z,1520719839.941 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:10:40.335Z,1520719840.335 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:10:40.796Z,1520719840.796 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:10:41.184Z,1520719841.184 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:10:41.551Z,1520719841.551 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:10:41.940Z,1520719841.940 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:10:42.335Z,1520719842.335 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:10:42.734Z,1520719842.734 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:10:43.135Z,1520719843.135 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:10:43.542Z,1520719843.542 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:10:43.934Z,1520719843.934 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:10:44.334Z,1520719844.334 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:10:44.734Z,1520719844.734 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:10:45.134Z,1520719845.134 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:10:45.540Z,1520719845.540 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:10:45.938Z,1520719845.938 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:10:46.337Z,1520719846.337 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:10:46.751Z,1520719846.751 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:10:47.142Z,1520719847.142 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:10:47.540Z,1520719847.540 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:10:47.992Z,1520719847.992 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:10:48.342Z,1520719848.342 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:10:48.734Z,1520719848.734 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:10:49.135Z,1520719849.135 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:10:49.573Z,1520719849.573 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:10:49.985Z,1520719849.985 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:10:50.342Z,1520719850.342 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:10:50.734Z,1520719850.734 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:10:51.139Z,1520719851.139 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:10:51.558Z,1520719851.558 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:10:51.937Z,1520719851.937 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:10:52.334Z,1520719852.334 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:10:52.740Z,1520719852.740 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:10:53.150Z,1520719853.150 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:10:53.542Z,1520719853.542 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:10:53.957Z,1520719853.957 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:10:54.334Z,1520719854.334 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:10:54.738Z,1520719854.738 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:10:55.145Z,1520719855.145 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:10:55.548Z,1520719855.548 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:10:55.942Z,1520719855.942 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:10:56.334Z,1520719856.334 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:10:56.734Z,1520719856.734 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:10:57.134Z,1520719857.134 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:10:57.534Z,1520719857.534 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:10:57.935Z,1520719857.935 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:10:58.348Z,1520719858.348 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:10:58.774Z,1520719858.774 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:10:59.142Z,1520719859.142 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:10:59.567Z,1520719859.567 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:10:59.939Z,1520719859.939 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:11:00.359Z,1520719860.359 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:11:00.733Z,1520719860.733 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:11:01.136Z,1520719861.136 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:11:01.534Z,1520719861.534 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:11:01.956Z,1520719861.956 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:11:02.334Z,1520719862.334 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:11:02.746Z,1520719862.746 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:11:03.150Z,1520719863.150 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:11:03.541Z,1520719863.541 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:11:03.934Z,1520719863.934 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:11:04.368Z,1520719864.368 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:11:04.742Z,1520719864.742 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:11:05.163Z,1520719865.163 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:11:05.534Z,1520719865.534 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:11:05.948Z,1520719865.948 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:11:06.334Z,1520719866.334 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:11:06.735Z,1520719866.735 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:11:07.162Z,1520719867.162 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:11:07.542Z,1520719867.542 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:11:07.963Z,1520719867.963 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:11:08.335Z,1520719868.335 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:11:08.742Z,1520719868.742 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:11:09.141Z,1520719869.141 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:11:09.554Z,1520719869.554 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:11:09.992Z,1520719869.992 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:11:10.367Z,1520719870.367 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:11:10.779Z,1520719870.779 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:11:11.137Z,1520719871.137 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:11:11.586Z,1520719871.586 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:11:11.984Z,1520719871.984 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:11:12.392Z,1520719872.392 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:11:12.803Z,1520719872.803 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:11:13.203Z,1520719873.203 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:11:13.636Z,1520719873.636 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:11:13.949Z,1520719873.949 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:11:14.372Z,1520719874.372 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:11:14.752Z,1520719874.752 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:11:15.171Z,1520719875.171 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:11:15.580Z,1520719875.580 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:11:16.010Z,1520719876.010 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:11:16.342Z,1520719876.342 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:11:16.774Z,1520719876.774 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:11:17.176Z,1520719877.176 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:11:17.574Z,1520719877.574 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:11:17.984Z,1520719877.984 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:11:18.389Z,1520719878.389 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:11:18.752Z,1520719878.752 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:11:19.151Z,1520719879.151 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:11:19.542Z,1520719879.542 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:11:19.994Z,1520719879.994 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:11:20.337Z,1520719880.337 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:11:20.734Z,1520719880.734 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:11:21.138Z,1520719881.138 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:11:21.592Z,1520719881.592 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:11:21.968Z,1520719881.968 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:11:22.353Z,1520719882.353 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:11:22.764Z,1520719882.764 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:11:23.136Z,1520719883.136 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:11:23.542Z,1520719883.542 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:11:23.936Z,1520719883.936 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:11:24.335Z,1520719884.335 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:11:24.737Z,1520719884.737 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:11:29.792Z,1520719889.792 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:11:29.927Z,1520719889.927 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:11:30.328Z,1520719890.328 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:11:30.714Z,1520719890.714 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:11:31.114Z,1520719891.114 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:11:31.519Z,1520719891.519 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:11:31.933Z,1520719891.933 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:11:32.314Z,1520719892.314 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:11:32.714Z,1520719892.714 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:11:33.114Z,1520719893.114 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:11:33.514Z,1520719893.514 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:11:33.923Z,1520719893.923 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:11:34.323Z,1520719894.323 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:11:34.714Z,1520719894.714 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:11:35.120Z,1520719895.120 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:11:35.514Z,1520719895.514 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:11:35.914Z,1520719895.914 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:11:36.324Z,1520719896.324 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:11:36.717Z,1520719896.717 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:11:37.121Z,1520719897.121 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:11:37.514Z,1520719897.514 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:11:37.914Z,1520719897.914 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:11:38.314Z,1520719898.314 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:11:38.720Z,1520719898.720 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:11:39.116Z,1520719899.116 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:11:39.512Z,1520719899.512 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:11:39.923Z,1520719899.923 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:11:40.322Z,1520719900.322 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:11:40.712Z,1520719900.712 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:11:41.119Z,1520719901.119 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:11:41.515Z,1520719901.515 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:11:41.915Z,1520719901.915 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:11:42.328Z,1520719902.328 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:11:42.336Z,1520719902.336 [BPC1](ERROR): Failed to receive battery data
2018-03-10T22:11:42.336Z,1520719902.336 [BPC1] Communications Fault, FailCount= 1
2018-03-10T22:11:42.337Z,1520719902.337 [BPC1](ERROR): Communications Fault
2018-03-10T22:11:42.539Z,1520719902.539 [CBIT](ERROR): Communications Fault in component: BPC1
2018-03-10T22:11:42.728Z,1520719902.728 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:11:43.116Z,1520719903.116 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:11:43.523Z,1520719903.523 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:11:43.620Z,1520719903.620 [CBIT](INFO): Clearing failed state for component BPC1
2018-03-10T22:11:43.620Z,1520719903.620 [BPC1] No Fault, FailCount= 1
2018-03-10T22:11:43.925Z,1520719903.925 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:11:44.316Z,1520719904.316 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:11:44.715Z,1520719904.715 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:11:45.124Z,1520719905.124 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:11:45.514Z,1520719905.514 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:11:45.924Z,1520719905.924 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:11:46.315Z,1520719906.315 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:11:46.714Z,1520719906.714 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:11:47.119Z,1520719907.119 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:11:47.514Z,1520719907.514 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:11:47.914Z,1520719907.914 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:11:48.320Z,1520719908.320 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:11:48.722Z,1520719908.722 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:11:49.114Z,1520719909.114 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:11:49.514Z,1520719909.514 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:11:49.927Z,1520719909.927 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:11:50.319Z,1520719910.319 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:11:50.726Z,1520719910.726 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:11:51.120Z,1520719911.120 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:11:51.512Z,1520719911.512 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:11:51.926Z,1520719911.926 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:11:52.318Z,1520719912.318 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:11:52.712Z,1520719912.712 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:11:53.127Z,1520719913.127 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:11:53.523Z,1520719913.523 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:11:53.914Z,1520719913.914 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:11:54.314Z,1520719914.314 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:11:54.756Z,1520719914.756 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:11:55.114Z,1520719915.114 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:11:55.560Z,1520719915.560 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:11:55.923Z,1520719915.923 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:11:56.320Z,1520719916.320 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:11:56.712Z,1520719916.712 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:11:57.118Z,1520719917.118 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:11:57.541Z,1520719917.541 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:11:57.912Z,1520719917.912 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:11:58.312Z,1520719918.312 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:11:58.735Z,1520719918.735 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:11:59.201Z,1520719919.201 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:11:59.533Z,1520719919.533 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:11:59.924Z,1520719919.924 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:12:00.328Z,1520719920.328 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:12:00.722Z,1520719920.722 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:12:01.134Z,1520719921.134 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:12:01.515Z,1520719921.515 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:12:01.918Z,1520719921.918 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:12:02.337Z,1520719922.337 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:12:02.764Z,1520719922.764 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:12:03.164Z,1520719923.164 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:12:03.531Z,1520719923.531 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:12:03.928Z,1520719923.928 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:12:04.319Z,1520719924.319 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:12:04.714Z,1520719924.714 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:12:05.120Z,1520719925.120 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:12:05.514Z,1520719925.514 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:12:05.918Z,1520719925.918 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:12:06.314Z,1520719926.314 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:12:06.717Z,1520719926.717 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:12:07.120Z,1520719927.120 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:12:07.529Z,1520719927.529 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:12:07.922Z,1520719927.922 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:12:08.314Z,1520719928.314 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:12:08.714Z,1520719928.714 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:12:09.115Z,1520719929.115 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:12:09.522Z,1520719929.522 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:12:09.916Z,1520719929.916 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:12:10.308Z,1520719930.308 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:12:10.712Z,1520719930.712 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:12:11.116Z,1520719931.116 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:12:11.508Z,1520719931.508 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:12:11.918Z,1520719931.918 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:12:12.330Z,1520719932.330 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:12:12.720Z,1520719932.720 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:12:13.114Z,1520719933.114 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:12:13.515Z,1520719933.515 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:12:13.918Z,1520719933.918 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:12:14.323Z,1520719934.323 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:12:14.332Z,1520719934.332 [BPC1](FAULT): Failed to initialize
2018-03-10T22:12:14.332Z,1520719934.332 [BPC1] Communications Fault, FailCount= 2
2018-03-10T22:12:14.332Z,1520719934.332 [BPC1](ERROR): Communications Fault
2018-03-10T22:12:14.454Z,1520719934.454 [CBIT](ERROR): Communications Fault in component: BPC1
2018-03-10T22:12:14.723Z,1520719934.723 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:12:15.114Z,1520719935.114 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:12:15.523Z,1520719935.523 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:12:15.597Z,1520719935.597 [CBIT](INFO): Clearing failed state for component BPC1
2018-03-10T22:12:15.597Z,1520719935.597 [BPC1] No Fault, FailCount= 2
2018-03-10T22:12:15.919Z,1520719935.919 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:12:16.315Z,1520719936.315 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:12:16.720Z,1520719936.720 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:12:17.120Z,1520719937.120 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:12:17.512Z,1520719937.512 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:12:17.920Z,1520719937.920 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:12:18.324Z,1520719938.324 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:12:18.722Z,1520719938.722 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:12:19.126Z,1520719939.126 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:12:19.528Z,1520719939.528 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:12:19.914Z,1520719939.914 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:12:20.323Z,1520719940.323 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:12:20.722Z,1520719940.722 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:12:21.115Z,1520719941.115 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:12:21.526Z,1520719941.526 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:12:21.921Z,1520719941.921 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:12:22.312Z,1520719942.312 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:12:22.726Z,1520719942.726 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:12:23.119Z,1520719943.119 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:12:23.514Z,1520719943.514 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:12:23.924Z,1520719943.924 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:12:24.326Z,1520719944.326 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:12:24.720Z,1520719944.720 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:12:25.115Z,1520719945.115 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:12:30.181Z,1520719950.181 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:12:30.340Z,1520719950.340 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:12:30.392Z,1520719950.392 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T22:12:30.392Z,1520719950.392 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 12
2018-03-10T22:12:30.392Z,1520719950.392 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-10T22:12:30.433Z,1520719950.433 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-10T22:12:30.715Z,1520719950.715 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:12:30.798Z,1520719950.798 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-10T22:12:30.798Z,1520719950.798 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 12
2018-03-10T22:12:31.107Z,1520719951.107 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:12:31.182Z,1520719951.182 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-10T22:12:31.182Z,1520719951.182 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-10T22:12:31.183Z,1520719951.183 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-10T22:12:31.512Z,1520719951.512 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:12:31.908Z,1520719951.908 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:12:32.312Z,1520719952.312 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:12:32.721Z,1520719952.721 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:12:33.119Z,1520719953.119 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:12:33.504Z,1520719953.504 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:12:33.906Z,1520719953.906 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:12:34.306Z,1520719954.306 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:12:34.738Z,1520719954.738 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:12:35.132Z,1520719955.132 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:12:35.520Z,1520719955.520 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:12:35.904Z,1520719955.904 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:12:36.314Z,1520719956.314 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:12:36.721Z,1520719956.721 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:12:37.137Z,1520719957.137 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:12:37.546Z,1520719957.546 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:12:37.934Z,1520719957.934 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:12:38.314Z,1520719958.314 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:12:38.706Z,1520719958.706 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:12:39.111Z,1520719959.111 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:12:39.510Z,1520719959.510 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:12:39.906Z,1520719959.906 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:12:40.307Z,1520719960.307 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:12:40.704Z,1520719960.704 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:12:41.114Z,1520719961.114 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:12:41.524Z,1520719961.524 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:12:41.908Z,1520719961.908 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:12:42.311Z,1520719962.311 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:12:42.784Z,1520719962.784 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:12:43.112Z,1520719963.112 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:12:43.506Z,1520719963.506 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:12:43.911Z,1520719963.911 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:12:44.300Z,1520719964.300 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:12:44.722Z,1520719964.722 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:12:45.183Z,1520719965.183 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:12:45.537Z,1520719965.537 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:12:45.958Z,1520719965.958 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:12:46.307Z,1520719966.307 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:12:46.315Z,1520719966.315 [BPC1](FAULT): Failed to initialize
2018-03-10T22:12:46.315Z,1520719966.315 [BPC1] Communications Fault, FailCount= 3
2018-03-10T22:12:46.315Z,1520719966.315 [BPC1](ERROR): Communications Fault
2018-03-10T22:12:46.448Z,1520719966.448 [CBIT](ERROR): Communications Fault in component: BPC1
2018-03-10T22:12:46.704Z,1520719966.704 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:12:47.106Z,1520719967.106 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:12:47.511Z,1520719967.511 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:12:47.592Z,1520719967.592 [CBIT](INFO): Clearing failed state for component BPC1
2018-03-10T22:12:47.592Z,1520719967.592 [BPC1] No Fault, FailCount= 3
2018-03-10T22:12:47.909Z,1520719967.909 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:12:48.309Z,1520719968.309 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:12:48.720Z,1520719968.720 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:12:49.106Z,1520719969.106 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:12:49.512Z,1520719969.512 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:12:49.906Z,1520719969.906 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:12:50.307Z,1520719970.307 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:12:50.716Z,1520719970.716 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:12:51.116Z,1520719971.116 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:12:51.504Z,1520719971.504 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:12:51.916Z,1520719971.916 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:12:52.318Z,1520719972.318 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:12:52.707Z,1520719972.707 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:12:53.112Z,1520719973.112 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:12:53.519Z,1520719973.519 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:12:53.929Z,1520719973.929 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:12:54.307Z,1520719974.307 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:12:54.707Z,1520719974.707 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:12:55.110Z,1520719975.110 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:12:55.520Z,1520719975.520 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:12:55.912Z,1520719975.912 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:12:56.306Z,1520719976.306 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:12:56.712Z,1520719976.712 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:12:57.111Z,1520719977.111 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:12:57.511Z,1520719977.511 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:12:57.918Z,1520719977.918 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:12:58.306Z,1520719978.306 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:12:58.714Z,1520719978.714 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:12:59.115Z,1520719979.115 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:12:59.516Z,1520719979.516 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:12:59.915Z,1520719979.915 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:13:00.307Z,1520719980.307 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:13:00.715Z,1520719980.715 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:13:01.115Z,1520719981.115 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:13:01.507Z,1520719981.507 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:13:01.907Z,1520719981.907 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:13:02.321Z,1520719982.321 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:13:02.715Z,1520719982.715 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:13:03.120Z,1520719983.120 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:13:03.507Z,1520719983.507 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:13:03.913Z,1520719983.913 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:13:04.314Z,1520719984.314 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:13:04.716Z,1520719984.716 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:13:05.110Z,1520719985.110 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:13:05.521Z,1520719985.521 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:13:05.910Z,1520719985.910 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:13:06.304Z,1520719986.304 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:13:06.716Z,1520719986.716 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:13:07.114Z,1520719987.114 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:13:07.504Z,1520719987.504 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:13:07.918Z,1520719987.918 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:13:08.306Z,1520719988.306 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:13:08.700Z,1520719988.700 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:13:09.116Z,1520719989.116 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:13:09.539Z,1520719989.539 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:13:09.915Z,1520719989.915 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:13:10.309Z,1520719990.309 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:13:10.721Z,1520719990.721 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:13:11.125Z,1520719991.125 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:13:11.518Z,1520719991.518 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:13:11.929Z,1520719991.929 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:13:12.334Z,1520719992.334 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:13:12.787Z,1520719992.787 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:13:13.130Z,1520719993.130 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:13:13.503Z,1520719993.503 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:13:13.922Z,1520719993.922 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:13:14.312Z,1520719994.312 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:13:14.710Z,1520719994.710 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:13:15.197Z,1520719995.197 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:13:15.576Z,1520719995.576 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:13:15.925Z,1520719995.925 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:13:16.330Z,1520719996.330 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:13:16.732Z,1520719996.732 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:13:17.119Z,1520719997.119 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:13:17.520Z,1520719997.520 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:13:17.906Z,1520719997.906 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:13:18.304Z,1520719998.304 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:13:18.316Z,1520719998.316 [BPC1](FAULT): Failed to initialize
2018-03-10T22:13:18.316Z,1520719998.316 [BPC1] Communications Fault, FailCount= 4
2018-03-10T22:13:18.317Z,1520719998.317 [BPC1](ERROR): Communications Fault
2018-03-10T22:13:18.390Z,1520719998.390 [CBIT](ERROR): Communications Fault in component: BPC1
2018-03-10T22:13:18.711Z,1520719998.711 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:13:19.113Z,1520719999.113 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:13:19.516Z,1520719999.516 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:13:19.603Z,1520719999.603 [CBIT](INFO): Clearing failed state for component BPC1
2018-03-10T22:13:19.603Z,1520719999.603 [BPC1] No Fault, FailCount= 4
2018-03-10T22:13:19.921Z,1520719999.921 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:13:20.316Z,1520720000.316 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:13:20.704Z,1520720000.704 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:13:21.114Z,1520720001.114 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:13:21.514Z,1520720001.514 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:13:21.907Z,1520720001.907 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:13:22.315Z,1520720002.315 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:13:22.706Z,1520720002.706 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:13:23.114Z,1520720003.114 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:13:23.507Z,1520720003.507 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:13:23.910Z,1520720003.910 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:13:24.312Z,1520720004.312 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:13:24.719Z,1520720004.719 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:13:25.106Z,1520720005.106 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:13:25.505Z,1520720005.505 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:13:30.546Z,1520720010.546 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:13:30.712Z,1520720010.712 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:13:31.090Z,1520720011.090 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:13:31.498Z,1520720011.498 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:13:31.872Z,1520720011.872 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:13:32.278Z,1520720012.278 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:13:32.678Z,1520720012.678 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:13:33.078Z,1520720013.078 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:13:33.484Z,1520720013.484 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:13:33.884Z,1520720013.884 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:13:34.278Z,1520720014.278 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:13:34.687Z,1520720014.687 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:13:35.078Z,1520720015.078 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:13:35.476Z,1520720015.476 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:13:35.878Z,1520720015.878 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:13:36.287Z,1520720016.287 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:13:36.683Z,1520720016.683 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:13:37.085Z,1520720017.085 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:13:37.478Z,1520720017.478 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:13:37.876Z,1520720017.876 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:13:38.293Z,1520720018.293 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:13:38.686Z,1520720018.686 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:13:39.086Z,1520720019.086 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:13:39.483Z,1520720019.483 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:13:39.878Z,1520720019.878 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:13:40.285Z,1520720020.285 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:13:40.691Z,1520720020.691 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:13:41.087Z,1520720021.087 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:13:41.493Z,1520720021.493 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:13:41.894Z,1520720021.894 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:13:42.288Z,1520720022.288 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:13:42.678Z,1520720022.678 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:13:43.078Z,1520720023.078 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:13:43.478Z,1520720023.478 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:13:43.883Z,1520720023.883 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:13:44.292Z,1520720024.292 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:13:44.697Z,1520720024.697 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:13:45.081Z,1520720025.081 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:13:45.497Z,1520720025.497 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:13:45.877Z,1520720025.877 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:13:46.273Z,1520720026.273 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:13:46.681Z,1520720026.681 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:13:47.077Z,1520720027.077 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:13:47.479Z,1520720027.479 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:13:47.883Z,1520720027.883 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:13:48.359Z,1520720028.359 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:13:48.688Z,1520720028.688 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:13:49.088Z,1520720029.088 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:13:49.490Z,1520720029.490 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:13:49.886Z,1520720029.886 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:13:50.278Z,1520720030.278 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:13:50.683Z,1520720030.683 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:13:51.085Z,1520720031.085 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:13:51.495Z,1520720031.495 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:13:51.886Z,1520720031.886 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:13:52.276Z,1520720032.276 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:13:52.679Z,1520720032.679 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:13:53.078Z,1520720033.078 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:13:53.479Z,1520720033.479 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:13:53.877Z,1520720033.877 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:13:54.278Z,1520720034.278 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:13:54.676Z,1520720034.676 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:13:55.088Z,1520720035.088 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:13:55.493Z,1520720035.493 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:13:55.886Z,1520720035.886 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:13:56.280Z,1520720036.280 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:13:56.691Z,1520720036.691 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:13:57.084Z,1520720037.084 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:13:57.478Z,1520720037.478 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:13:57.878Z,1520720037.878 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:13:58.289Z,1520720038.289 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:13:58.691Z,1520720038.691 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:13:59.086Z,1520720039.086 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:13:59.491Z,1520720039.491 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:13:59.889Z,1520720039.889 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:14:00.278Z,1520720040.278 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:14:00.688Z,1520720040.688 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:14:01.090Z,1520720041.090 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:14:01.487Z,1520720041.487 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:14:01.893Z,1520720041.893 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:14:02.295Z,1520720042.295 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:14:02.679Z,1520720042.679 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:14:03.079Z,1520720043.079 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:14:03.479Z,1520720043.479 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:14:03.879Z,1520720043.879 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:14:04.278Z,1520720044.278 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:14:04.693Z,1520720044.693 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:14:05.078Z,1520720045.078 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:14:05.472Z,1520720045.472 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:14:05.878Z,1520720045.878 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:14:06.278Z,1520720046.278 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:14:06.696Z,1520720046.696 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:14:07.084Z,1520720047.084 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:14:07.478Z,1520720047.478 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:14:07.886Z,1520720047.886 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:14:08.279Z,1520720048.279 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:14:08.689Z,1520720048.689 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:14:09.089Z,1520720049.089 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:14:09.493Z,1520720049.493 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:14:09.885Z,1520720049.885 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:14:10.279Z,1520720050.279 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:14:10.683Z,1520720050.683 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:14:11.091Z,1520720051.091 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:14:11.479Z,1520720051.479 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:14:11.888Z,1520720051.888 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:14:12.287Z,1520720052.287 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:14:12.686Z,1520720052.686 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:14:13.078Z,1520720053.078 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:14:13.482Z,1520720053.482 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:14:13.883Z,1520720053.883 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:14:14.293Z,1520720054.293 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:14:14.697Z,1520720054.697 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:14:15.076Z,1520720055.076 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:14:15.488Z,1520720055.488 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:14:15.893Z,1520720055.893 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:14:16.286Z,1520720056.286 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:14:16.678Z,1520720056.678 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:14:17.079Z,1520720057.079 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:14:17.478Z,1520720057.478 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:14:17.880Z,1520720057.880 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:14:18.288Z,1520720058.288 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:14:18.684Z,1520720058.684 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:14:19.098Z,1520720059.098 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:14:19.480Z,1520720059.480 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:14:19.879Z,1520720059.879 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:14:20.280Z,1520720060.280 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:14:20.679Z,1520720060.679 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:14:21.082Z,1520720061.082 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:14:21.493Z,1520720061.493 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:14:21.879Z,1520720061.879 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:14:22.286Z,1520720062.286 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:14:22.678Z,1520720062.678 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:14:23.078Z,1520720063.078 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:14:23.478Z,1520720063.478 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:14:23.878Z,1520720063.878 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:14:24.278Z,1520720064.278 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:14:24.676Z,1520720064.676 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:14:25.084Z,1520720065.084 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:14:25.489Z,1520720065.489 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:14:25.886Z,1520720065.886 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:14:30.971Z,1520720070.971 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:14:31.140Z,1520720071.140 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:14:31.468Z,1520720071.468 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:14:31.870Z,1520720071.870 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:14:32.274Z,1520720072.274 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:14:32.673Z,1520720072.673 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:14:33.062Z,1520720073.062 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:14:33.456Z,1520720073.456 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:14:33.871Z,1520720073.871 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:14:34.269Z,1520720074.269 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:14:34.674Z,1520720074.674 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:14:35.076Z,1520720075.076 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:14:35.462Z,1520720075.462 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:14:35.872Z,1520720075.872 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:14:36.262Z,1520720076.262 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:14:36.667Z,1520720076.667 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:14:37.060Z,1520720077.060 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:14:37.472Z,1520720077.472 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:14:37.872Z,1520720077.872 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:14:38.262Z,1520720078.262 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:14:38.672Z,1520720078.672 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:14:39.070Z,1520720079.070 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:14:39.460Z,1520720079.460 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:14:39.867Z,1520720079.867 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:14:40.262Z,1520720080.262 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:14:40.665Z,1520720080.665 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:14:41.062Z,1520720081.062 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:14:41.477Z,1520720081.477 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:14:41.872Z,1520720081.872 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:14:42.262Z,1520720082.262 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:14:42.677Z,1520720082.677 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:14:43.069Z,1520720083.069 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:14:43.463Z,1520720083.463 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:14:43.869Z,1520720083.869 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:14:44.262Z,1520720084.262 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:14:44.664Z,1520720084.664 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:14:45.081Z,1520720085.081 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:14:45.462Z,1520720085.462 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:14:45.862Z,1520720085.862 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:14:46.271Z,1520720086.271 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:14:46.677Z,1520720086.677 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:14:47.071Z,1520720087.071 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:14:47.464Z,1520720087.464 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:14:47.863Z,1520720087.863 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:14:48.262Z,1520720088.262 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:14:48.664Z,1520720088.664 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:14:49.067Z,1520720089.067 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:14:49.484Z,1520720089.484 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:14:49.872Z,1520720089.872 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:14:50.269Z,1520720090.269 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:14:50.662Z,1520720090.662 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:14:51.072Z,1520720091.072 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:14:51.460Z,1520720091.460 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:14:51.862Z,1520720091.862 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:14:52.263Z,1520720092.263 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:14:52.680Z,1520720092.680 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:14:53.068Z,1520720093.068 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:14:53.462Z,1520720093.462 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:14:53.868Z,1520720093.868 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:14:54.272Z,1520720094.272 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:14:54.669Z,1520720094.669 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:14:55.062Z,1520720095.062 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:14:55.477Z,1520720095.477 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:14:55.882Z,1520720095.882 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:14:56.262Z,1520720096.262 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:14:56.662Z,1520720096.662 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:14:57.062Z,1520720097.062 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:14:57.462Z,1520720097.462 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:14:57.862Z,1520720097.862 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:14:58.268Z,1520720098.268 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:14:58.663Z,1520720098.663 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:14:59.067Z,1520720099.067 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:14:59.476Z,1520720099.476 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:14:59.862Z,1520720099.862 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:15:00.267Z,1520720100.267 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:15:00.668Z,1520720100.668 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:15:01.062Z,1520720101.062 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:15:01.478Z,1520720101.478 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:15:01.869Z,1520720101.869 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:15:02.271Z,1520720102.271 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:15:02.669Z,1520720102.669 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:15:03.063Z,1520720103.063 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:15:03.475Z,1520720103.475 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:15:03.872Z,1520720103.872 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:15:04.271Z,1520720104.271 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:15:04.662Z,1520720104.662 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:15:05.062Z,1520720105.062 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:15:05.471Z,1520720105.471 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:15:05.862Z,1520720105.862 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:15:06.272Z,1520720106.272 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:15:06.662Z,1520720106.662 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:15:07.062Z,1520720107.062 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:15:07.463Z,1520720107.463 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:15:07.862Z,1520720107.862 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:15:08.262Z,1520720108.262 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:15:08.662Z,1520720108.662 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:15:09.066Z,1520720109.066 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:15:09.470Z,1520720109.470 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:15:09.876Z,1520720109.876 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:15:10.262Z,1520720110.262 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:15:10.662Z,1520720110.662 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:15:11.067Z,1520720111.067 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:15:11.471Z,1520720111.471 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:15:11.874Z,1520720111.874 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:15:12.271Z,1520720112.271 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:15:12.671Z,1520720112.671 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:15:13.062Z,1520720113.062 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:15:13.471Z,1520720113.471 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:15:13.876Z,1520720113.876 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:15:14.262Z,1520720114.262 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:15:14.679Z,1520720114.679 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:15:15.071Z,1520720115.071 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:15:15.471Z,1520720115.471 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:15:15.873Z,1520720115.873 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:15:16.303Z,1520720116.303 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:15:16.682Z,1520720116.682 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:15:17.083Z,1520720117.083 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:15:17.472Z,1520720117.472 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:15:17.876Z,1520720117.876 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:15:18.271Z,1520720118.271 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:15:18.665Z,1520720118.665 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:15:19.087Z,1520720119.087 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:15:19.515Z,1520720119.515 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:15:19.882Z,1520720119.882 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:15:20.307Z,1520720120.307 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:15:20.663Z,1520720120.663 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:15:21.062Z,1520720121.062 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:15:21.476Z,1520720121.476 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:15:21.876Z,1520720121.876 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:15:22.291Z,1520720122.291 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:15:22.760Z,1520720122.760 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:15:23.082Z,1520720123.082 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:15:23.493Z,1520720123.493 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:15:23.883Z,1520720123.883 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:15:24.273Z,1520720124.273 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:15:24.662Z,1520720124.662 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:15:24.714Z,1520720124.714 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-03-10T22:15:24.714Z,1520720124.714 [Default:CheckIn:C.Wait] Stopped
2018-03-10T22:15:24.714Z,1520720124.714 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-03-10T22:15:24.714Z,1520720124.714 [Default:CheckIn:D] Running Loop=1
2018-03-10T22:15:25.072Z,1520720125.072 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:15:25.117Z,1520720125.117 [Default:CheckIn:D] Stopped
2018-03-10T22:15:25.117Z,1520720125.117 [Default:CheckIn:E] Running Loop=1
2018-03-10T22:15:25.478Z,1520720125.478 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:15:25.529Z,1520720125.529 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1016.119922 min 
2018-03-10T22:15:25.529Z,1520720125.529 [Default:CheckIn:E] Stopped
2018-03-10T22:15:25.529Z,1520720125.529 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-03-10T22:15:25.530Z,1520720125.530 [Default:CheckIn] Stopped
2018-03-10T22:15:25.530Z,1520720125.530 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-03-10T22:15:25.530Z,1520720125.530 [Default:CheckIn](INFO): Running loop #101
2018-03-10T22:15:25.530Z,1520720125.530 [Default:CheckIn] Running Loop=101
2018-03-10T22:15:25.530Z,1520720125.530 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-03-10T22:15:25.530Z,1520720125.530 [Default:CheckIn:Read_GPS] Running Loop=1
2018-03-10T22:15:25.862Z,1520720125.862 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:15:26.248Z,1520720126.248 [NAL9602](INFO): Powering up
2018-03-10T22:15:26.268Z,1520720126.268 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:15:31.240Z,1520720131.240 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:15:31.326Z,1520720131.326 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T22:15:31.326Z,1520720131.326 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 13
2018-03-10T22:15:31.326Z,1520720131.326 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-10T22:15:31.347Z,1520720131.347 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-10T22:15:31.441Z,1520720131.441 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:15:31.562Z,1520720131.562 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-10T22:15:31.562Z,1520720131.562 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 13
2018-03-10T22:15:31.796Z,1520720131.796 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:15:31.845Z,1520720131.845 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-10T22:15:31.845Z,1520720131.845 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-10T22:15:31.846Z,1520720131.846 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-10T22:15:32.182Z,1520720132.182 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:15:32.591Z,1520720132.591 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:15:32.987Z,1520720132.987 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:15:33.387Z,1520720133.387 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:15:33.790Z,1520720133.790 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:15:34.203Z,1520720134.203 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:15:34.580Z,1520720134.580 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:15:35.002Z,1520720135.002 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:15:35.381Z,1520720135.381 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:15:35.780Z,1520720135.780 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:15:36.180Z,1520720136.180 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:15:36.580Z,1520720136.580 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:15:36.995Z,1520720136.995 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:15:37.364Z,1520720137.364 [NAL9602](INFO): NAL9602 initialized
2018-03-10T22:15:37.382Z,1520720137.382 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:15:37.782Z,1520720137.782 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:15:38.206Z,1520720138.206 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:15:38.608Z,1520720138.608 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:15:38.000Z,1520720139.000 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:15:39.395Z,1520720139.395 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:15:39.794Z,1520720139.794 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:15:40.193Z,1520720140.193 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:15:40.607Z,1520720140.607 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:15:40.984Z,1520720140.984 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:15:41.388Z,1520720141.388 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:15:41.782Z,1520720141.782 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:15:42.222Z,1520720142.222 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:15:42.602Z,1520720142.602 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:15:43.003Z,1520720143.003 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:15:43.402Z,1520720143.402 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:15:43.806Z,1520720143.806 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:15:44.187Z,1520720144.187 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:15:44.594Z,1520720144.594 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:15:44.990Z,1520720144.990 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:15:45.424Z,1520720145.424 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:15:45.829Z,1520720145.829 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:15:46.223Z,1520720146.223 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:15:46.606Z,1520720146.606 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:15:47.001Z,1520720147.001 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:15:47.406Z,1520720147.406 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:15:47.811Z,1520720147.811 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:15:48.195Z,1520720148.195 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:15:48.601Z,1520720148.601 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:15:48.991Z,1520720148.991 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:15:49.384Z,1520720149.384 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:15:49.782Z,1520720149.782 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:15:50.183Z,1520720150.183 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:15:50.588Z,1520720150.588 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:15:50.996Z,1520720150.996 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:15:51.391Z,1520720151.391 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:15:51.791Z,1520720151.791 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:15:52.183Z,1520720152.183 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:15:52.582Z,1520720152.582 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:15:52.992Z,1520720152.992 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:15:53.403Z,1520720153.403 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:15:53.802Z,1520720153.802 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:15:54.183Z,1520720154.183 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:15:54.600Z,1520720154.600 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:15:54.982Z,1520720154.982 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:15:55.388Z,1520720155.388 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:15:55.802Z,1520720155.802 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:15:56.198Z,1520720156.198 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:15:56.595Z,1520720156.595 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:15:56.654Z,1520720156.654 [CBIT](DEBUG): EFC running - data check-sum false
2018-03-10T22:15:56.998Z,1520720156.998 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:15:57.398Z,1520720157.398 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:15:57.782Z,1520720157.782 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:15:58.187Z,1520720158.187 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:15:58.598Z,1520720158.598 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:15:58.977Z,1520720158.977 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:15:59.383Z,1520720159.383 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:15:59.783Z,1520720159.783 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:16:00.202Z,1520720160.202 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:16:00.612Z,1520720160.612 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:16:00.992Z,1520720160.992 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:16:01.391Z,1520720161.391 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:16:01.792Z,1520720161.792 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:16:02.197Z,1520720162.197 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:16:02.593Z,1520720162.593 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:16:02.983Z,1520720162.983 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:16:03.388Z,1520720163.388 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:16:03.790Z,1520720163.790 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:16:04.197Z,1520720164.197 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:16:04.608Z,1520720164.608 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:16:05.004Z,1520720165.004 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:16:05.383Z,1520720165.383 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:16:05.787Z,1520720165.787 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:16:06.192Z,1520720166.192 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:16:06.590Z,1520720166.590 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:16:06.987Z,1520720166.987 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:16:07.384Z,1520720167.384 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:16:07.792Z,1520720167.792 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:16:08.195Z,1520720168.195 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:16:08.591Z,1520720168.591 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:16:08.989Z,1520720168.989 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:16:09.391Z,1520720169.391 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:16:09.783Z,1520720169.783 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:16:10.183Z,1520720170.183 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:16:10.582Z,1520720170.582 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:16:10.998Z,1520720170.998 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:16:11.397Z,1520720171.397 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:16:11.797Z,1520720171.797 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:16:12.193Z,1520720172.193 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:16:12.610Z,1520720172.610 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:16:12.992Z,1520720172.992 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:16:13.397Z,1520720173.397 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:16:13.803Z,1520720173.803 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:16:14.194Z,1520720174.194 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:16:14.583Z,1520720174.583 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:16:15.005Z,1520720175.005 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:16:15.386Z,1520720175.386 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:16:15.781Z,1520720175.781 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:16:16.192Z,1520720176.192 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:16:16.594Z,1520720176.594 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:16:16.990Z,1520720176.990 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:16:17.412Z,1520720177.412 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:16:17.802Z,1520720177.802 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:16:18.222Z,1520720178.222 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:16:18.583Z,1520720178.583 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:16:19.012Z,1520720179.012 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:16:19.391Z,1520720179.391 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:16:19.796Z,1520720179.796 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:16:20.201Z,1520720180.201 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:16:20.588Z,1520720180.588 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:16:20.987Z,1520720180.987 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:16:21.391Z,1520720181.391 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:16:21.801Z,1520720181.801 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:16:22.200Z,1520720182.200 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:16:22.588Z,1520720182.588 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:16:22.983Z,1520720182.983 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:16:23.387Z,1520720183.387 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:16:23.796Z,1520720183.796 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:16:24.216Z,1520720184.216 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:16:24.583Z,1520720184.583 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:16:24.982Z,1520720184.982 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:16:25.388Z,1520720185.388 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:16:25.791Z,1520720185.791 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:16:26.197Z,1520720186.197 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:16:26.583Z,1520720186.583 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:16:26.992Z,1520720186.992 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:16:27.397Z,1520720187.397 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:16:32.352Z,1520720192.352 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:16:32.508Z,1520720192.508 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:16:32.880Z,1520720192.880 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:16:33.284Z,1520720193.284 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:16:33.690Z,1520720193.690 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:16:34.084Z,1520720194.084 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:16:34.480Z,1520720194.480 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:16:34.871Z,1520720194.871 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:16:35.292Z,1520720195.292 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:16:35.686Z,1520720195.686 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:16:36.075Z,1520720196.075 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:16:36.483Z,1520720196.483 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:16:36.876Z,1520720196.876 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:16:37.290Z,1520720197.290 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:16:37.679Z,1520720197.679 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:16:38.072Z,1520720198.072 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:16:38.487Z,1520720198.487 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:16:38.883Z,1520720198.883 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:16:39.283Z,1520720199.283 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:16:39.693Z,1520720199.693 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:16:40.090Z,1520720200.090 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:16:40.484Z,1520720200.484 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:16:40.871Z,1520720200.871 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:16:41.271Z,1520720201.271 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:16:41.676Z,1520720201.676 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:16:42.087Z,1520720202.087 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:16:42.488Z,1520720202.488 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:16:42.871Z,1520720202.871 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:16:43.271Z,1520720203.271 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:16:43.689Z,1520720203.689 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:16:44.071Z,1520720204.071 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:16:44.480Z,1520720204.480 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:16:44.900Z,1520720204.900 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:16:45.282Z,1520720205.282 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:16:45.685Z,1520720205.685 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:16:46.070Z,1520720206.070 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:16:46.485Z,1520720206.485 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:16:46.876Z,1520720206.876 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:16:47.270Z,1520720207.270 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:16:47.677Z,1520720207.677 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:16:48.085Z,1520720208.085 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:16:48.499Z,1520720208.499 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:16:48.897Z,1520720208.897 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:16:49.271Z,1520720209.271 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:16:49.680Z,1520720209.680 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:16:50.080Z,1520720210.080 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:16:50.482Z,1520720210.482 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:16:50.884Z,1520720210.884 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:16:51.295Z,1520720211.295 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:16:51.676Z,1520720211.676 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:16:52.076Z,1520720212.076 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:16:52.471Z,1520720212.471 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:16:52.879Z,1520720212.879 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:16:53.296Z,1520720213.296 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:16:53.686Z,1520720213.686 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:16:54.080Z,1520720214.080 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:16:54.476Z,1520720214.476 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:16:54.877Z,1520720214.877 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:16:55.283Z,1520720215.283 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:16:55.682Z,1520720215.682 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:16:56.078Z,1520720216.078 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:16:56.489Z,1520720216.489 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:16:56.892Z,1520720216.892 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:16:57.282Z,1520720217.282 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:16:57.705Z,1520720217.705 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:16:58.079Z,1520720218.079 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:16:58.482Z,1520720218.482 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:16:58.885Z,1520720218.885 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:16:59.276Z,1520720219.276 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:16:59.673Z,1520720219.673 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:17:00.071Z,1520720220.071 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:17:00.475Z,1520720220.475 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:17:00.885Z,1520720220.885 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:17:01.307Z,1520720221.307 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:17:01.692Z,1520720221.692 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:17:02.069Z,1520720222.069 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:17:02.471Z,1520720222.471 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:17:02.875Z,1520720222.875 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:17:03.276Z,1520720223.276 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:17:03.676Z,1520720223.676 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:17:04.076Z,1520720224.076 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:17:04.488Z,1520720224.488 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:17:04.879Z,1520720224.879 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:17:05.285Z,1520720225.285 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:17:05.695Z,1520720225.695 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:17:06.098Z,1520720226.098 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:17:06.502Z,1520720226.502 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:17:06.897Z,1520720226.897 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:17:07.282Z,1520720227.282 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:17:07.686Z,1520720227.686 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:17:08.091Z,1520720228.091 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:17:08.470Z,1520720228.470 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:17:08.922Z,1520720228.922 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:17:09.280Z,1520720229.280 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:17:09.697Z,1520720229.697 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:17:10.076Z,1520720230.076 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:17:10.490Z,1520720230.490 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:17:10.945Z,1520720230.945 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:17:11.295Z,1520720231.295 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:17:11.707Z,1520720231.707 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:17:12.098Z,1520720232.098 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:17:12.526Z,1520720232.526 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:17:12.876Z,1520720232.876 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:17:13.284Z,1520720233.284 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:17:13.721Z,1520720233.721 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:17:14.073Z,1520720234.073 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:17:14.482Z,1520720234.482 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:17:14.913Z,1520720234.913 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:17:15.305Z,1520720235.305 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:17:15.711Z,1520720235.711 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:17:16.143Z,1520720236.143 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:17:16.499Z,1520720236.499 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:17:16.890Z,1520720236.890 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:17:17.314Z,1520720237.314 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:17:17.675Z,1520720237.675 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:17:18.103Z,1520720238.103 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:17:18.471Z,1520720238.471 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:17:18.880Z,1520720238.880 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:17:19.284Z,1520720239.284 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:17:19.684Z,1520720239.684 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:17:20.082Z,1520720240.082 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:17:20.476Z,1520720240.476 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:17:20.895Z,1520720240.895 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:17:21.283Z,1520720241.283 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:17:21.687Z,1520720241.687 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:17:22.086Z,1520720242.086 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:17:22.481Z,1520720242.481 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:17:22.874Z,1520720242.874 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:17:23.276Z,1520720243.276 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:17:23.684Z,1520720243.684 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:17:24.081Z,1520720244.081 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:17:24.497Z,1520720244.497 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:17:24.871Z,1520720244.871 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:17:25.288Z,1520720245.288 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:17:25.675Z,1520720245.675 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:17:26.101Z,1520720246.101 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:17:26.486Z,1520720246.486 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:17:26.896Z,1520720246.896 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:17:31.318Z,1520720251.318 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:17:31.515Z,1520720251.515 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:17:31.878Z,1520720251.878 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:17:32.282Z,1520720252.282 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:17:32.694Z,1520720252.694 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:17:33.068Z,1520720253.068 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:17:33.469Z,1520720253.469 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:17:33.877Z,1520720253.877 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:17:34.280Z,1520720254.280 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:17:34.665Z,1520720254.665 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:17:35.072Z,1520720255.072 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:17:35.487Z,1520720255.487 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:17:35.881Z,1520720255.881 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:17:36.282Z,1520720256.282 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:17:36.693Z,1520720256.693 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:17:37.075Z,1520720257.075 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:17:37.467Z,1520720257.467 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:17:37.875Z,1520720257.875 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:17:38.268Z,1520720258.268 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:17:38.667Z,1520720258.667 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:17:39.064Z,1520720259.064 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:17:39.463Z,1520720259.463 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:17:39.875Z,1520720259.875 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:17:40.271Z,1520720260.271 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:17:40.672Z,1520720260.672 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:17:41.081Z,1520720261.081 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:17:41.474Z,1520720261.474 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:17:41.874Z,1520720261.874 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:17:42.278Z,1520720262.278 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:17:42.672Z,1520720262.672 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:17:43.063Z,1520720263.063 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:17:43.468Z,1520720263.468 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:17:43.871Z,1520720263.871 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:17:44.267Z,1520720264.267 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:17:44.663Z,1520720264.663 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:17:45.071Z,1520720265.071 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:17:45.475Z,1520720265.475 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:17:45.869Z,1520720265.869 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:17:46.290Z,1520720266.290 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:17:46.686Z,1520720266.686 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:17:47.077Z,1520720267.077 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:17:47.482Z,1520720267.482 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:17:47.864Z,1520720267.864 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:17:48.263Z,1520720268.263 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:17:48.660Z,1520720268.660 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:17:49.076Z,1520720269.076 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:17:49.466Z,1520720269.466 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:17:49.866Z,1520720269.866 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:17:50.263Z,1520720270.263 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:17:50.668Z,1520720270.668 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:17:51.086Z,1520720271.086 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:17:51.488Z,1520720271.488 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:17:51.867Z,1520720271.867 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:17:52.271Z,1520720272.271 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:17:52.677Z,1520720272.677 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:17:53.081Z,1520720273.081 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:17:53.465Z,1520720273.465 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:17:53.871Z,1520720273.871 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:17:54.262Z,1520720274.262 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:17:54.672Z,1520720274.672 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:17:55.068Z,1520720275.068 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:17:55.476Z,1520720275.476 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:17:55.879Z,1520720275.879 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:17:56.276Z,1520720276.276 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:17:56.663Z,1520720276.663 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:17:57.073Z,1520720277.073 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:17:57.473Z,1520720277.473 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:17:57.863Z,1520720277.863 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:17:58.264Z,1520720278.264 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:17:58.668Z,1520720278.668 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:17:59.078Z,1520720279.078 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:17:59.471Z,1520720279.471 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:17:59.863Z,1520720279.863 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:18:00.262Z,1520720280.262 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:18:00.671Z,1520720280.671 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:18:01.071Z,1520720281.071 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:18:01.485Z,1520720281.485 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:18:01.878Z,1520720281.878 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:18:02.272Z,1520720282.272 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:18:02.667Z,1520720282.667 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:18:03.068Z,1520720283.068 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:18:03.472Z,1520720283.472 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:18:03.870Z,1520720283.870 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:18:04.263Z,1520720284.263 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:18:04.672Z,1520720284.672 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:18:05.074Z,1520720285.074 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:18:05.471Z,1520720285.471 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:18:05.882Z,1520720285.882 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:18:06.275Z,1520720286.275 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:18:06.662Z,1520720286.662 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:18:07.077Z,1520720287.077 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:18:07.478Z,1520720287.478 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:18:07.873Z,1520720287.873 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:18:08.276Z,1520720288.276 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:18:08.669Z,1520720288.669 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:18:09.072Z,1520720289.072 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:18:09.467Z,1520720289.467 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:18:09.869Z,1520720289.869 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:18:10.278Z,1520720290.278 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:18:10.683Z,1520720290.683 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:18:11.079Z,1520720291.079 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:18:11.485Z,1520720291.485 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:18:11.869Z,1520720291.869 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:18:12.263Z,1520720292.263 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:18:12.667Z,1520720292.667 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:18:13.070Z,1520720293.070 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:18:13.463Z,1520720293.463 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:18:13.863Z,1520720293.863 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:18:14.268Z,1520720294.268 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:18:14.674Z,1520720294.674 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:18:15.087Z,1520720295.087 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:18:15.484Z,1520720295.484 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:18:15.883Z,1520720295.883 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:18:16.289Z,1520720296.289 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:18:16.668Z,1520720296.668 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:18:17.068Z,1520720297.068 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:18:17.475Z,1520720297.475 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:18:17.868Z,1520720297.868 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:18:18.272Z,1520720298.272 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:18:18.662Z,1520720298.662 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:18:19.067Z,1520720299.067 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:18:19.472Z,1520720299.472 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:18:19.881Z,1520720299.881 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:18:20.274Z,1520720300.274 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:18:20.686Z,1520720300.686 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:18:21.078Z,1520720301.078 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:18:21.462Z,1520720301.462 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:18:21.863Z,1520720301.863 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:18:22.263Z,1520720302.263 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:18:22.663Z,1520720302.663 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:18:23.064Z,1520720303.064 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:18:23.473Z,1520720303.473 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:18:23.872Z,1520720303.872 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:18:24.278Z,1520720304.278 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:18:24.665Z,1520720304.665 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:18:25.082Z,1520720305.082 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:18:25.478Z,1520720305.478 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:18:25.882Z,1520720305.882 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:18:26.278Z,1520720306.278 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:18:26.677Z,1520720306.677 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:18:27.071Z,1520720307.071 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:18:32.047Z,1520720312.047 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:18:32.066Z,1520720312.066 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T22:18:32.066Z,1520720312.066 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 14
2018-03-10T22:18:32.066Z,1520720312.066 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-10T22:18:32.128Z,1520720312.128 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-10T22:18:32.225Z,1520720312.225 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:18:32.327Z,1520720312.327 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-10T22:18:32.327Z,1520720312.327 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 14
2018-03-10T22:18:32.582Z,1520720312.582 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:18:32.619Z,1520720312.619 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-10T22:18:32.620Z,1520720312.620 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-10T22:18:32.620Z,1520720312.620 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-10T22:18:32.974Z,1520720312.974 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:18:33.383Z,1520720313.383 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:18:33.763Z,1520720313.763 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:18:34.176Z,1520720314.176 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:18:34.567Z,1520720314.567 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:18:34.965Z,1520720314.965 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:18:35.365Z,1520720315.365 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:18:35.777Z,1520720315.777 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:18:36.170Z,1520720316.170 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:18:36.568Z,1520720316.568 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:18:36.985Z,1520720316.985 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:18:37.385Z,1520720317.385 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:18:37.781Z,1520720317.781 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:18:38.174Z,1520720318.174 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:18:38.592Z,1520720318.592 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:18:38.967Z,1520720318.967 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:18:39.371Z,1520720319.371 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:18:39.776Z,1520720319.776 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:18:40.163Z,1520720320.163 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:18:40.563Z,1520720320.563 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:18:40.968Z,1520720320.968 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:18:41.361Z,1520720321.361 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:18:41.767Z,1520720321.767 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:18:42.182Z,1520720322.182 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:18:42.581Z,1520720322.581 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:18:42.982Z,1520720322.982 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:18:43.404Z,1520720323.404 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:18:43.768Z,1520720323.768 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:18:44.173Z,1520720324.173 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:18:44.578Z,1520720324.578 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:18:44.968Z,1520720324.968 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:18:45.380Z,1520720325.380 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:18:45.763Z,1520720325.763 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:18:46.168Z,1520720326.168 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:18:46.572Z,1520720326.572 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:18:46.972Z,1520720326.972 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:18:47.382Z,1520720327.382 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:18:47.778Z,1520720327.778 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:18:48.182Z,1520720328.182 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:18:48.574Z,1520720328.574 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:18:48.969Z,1520720328.969 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:18:49.376Z,1520720329.376 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:18:49.768Z,1520720329.768 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:18:50.163Z,1520720330.163 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:18:50.567Z,1520720330.567 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:18:50.976Z,1520720330.976 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:18:51.372Z,1520720331.372 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:18:51.762Z,1520720331.762 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:18:52.163Z,1520720332.163 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:18:52.581Z,1520720332.581 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:18:53.004Z,1520720333.004 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:18:53.378Z,1520720333.378 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:18:53.783Z,1520720333.783 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:18:54.176Z,1520720334.176 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:18:54.585Z,1520720334.585 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:18:54.971Z,1520720334.971 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:18:55.362Z,1520720335.362 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:18:55.764Z,1520720335.764 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:18:56.163Z,1520720336.163 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:18:56.568Z,1520720336.568 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:18:56.969Z,1520720336.969 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:18:57.369Z,1520720337.369 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:18:57.788Z,1520720337.788 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:18:58.179Z,1520720338.179 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:18:58.587Z,1520720338.587 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:18:58.982Z,1520720338.982 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:18:59.376Z,1520720339.376 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:18:59.772Z,1520720339.772 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:19:00.171Z,1520720340.171 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:19:00.575Z,1520720340.575 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:19:00.971Z,1520720340.971 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:19:01.372Z,1520720341.372 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:19:01.764Z,1520720341.764 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:19:02.163Z,1520720342.163 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:19:02.568Z,1520720342.568 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:19:02.975Z,1520720342.975 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:19:03.380Z,1520720343.380 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:19:03.787Z,1520720343.787 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:19:04.180Z,1520720344.180 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:19:04.563Z,1520720344.563 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:19:04.963Z,1520720344.963 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:19:05.369Z,1520720345.369 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:19:05.773Z,1520720345.773 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:19:06.173Z,1520720346.173 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:19:06.563Z,1520720346.563 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:19:06.964Z,1520720346.964 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:19:07.362Z,1520720347.362 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:19:07.763Z,1520720347.763 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:19:08.181Z,1520720348.181 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:19:08.573Z,1520720348.573 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:19:08.974Z,1520720348.974 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:19:09.380Z,1520720349.380 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:19:09.782Z,1520720349.782 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:19:10.164Z,1520720350.164 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:19:10.580Z,1520720350.580 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:19:10.963Z,1520720350.963 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:19:11.363Z,1520720351.363 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:19:11.776Z,1520720351.776 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:19:12.171Z,1520720352.171 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:19:12.574Z,1520720352.574 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:19:12.967Z,1520720352.967 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:19:13.385Z,1520720353.385 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:19:13.780Z,1520720353.780 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:19:14.190Z,1520720354.190 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:19:14.573Z,1520720354.573 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:19:14.968Z,1520720354.968 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:19:15.371Z,1520720355.371 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:19:15.780Z,1520720355.780 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:19:16.169Z,1520720356.169 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:19:16.575Z,1520720356.575 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:19:16.962Z,1520720356.962 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:19:17.363Z,1520720357.363 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:19:17.772Z,1520720357.772 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:19:18.172Z,1520720358.172 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:19:18.585Z,1520720358.585 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:19:18.984Z,1520720358.984 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:19:19.390Z,1520720359.390 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:19:19.783Z,1520720359.783 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:19:20.161Z,1520720360.161 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:19:20.563Z,1520720360.563 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:19:20.968Z,1520720360.968 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:19:21.373Z,1520720361.373 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:19:21.769Z,1520720361.769 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:19:22.176Z,1520720362.176 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:19:22.564Z,1520720362.564 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:19:22.962Z,1520720362.962 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:19:23.405Z,1520720363.405 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:19:23.843Z,1520720363.843 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:19:24.182Z,1520720364.182 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:19:24.582Z,1520720364.582 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:19:24.982Z,1520720364.982 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:19:25.377Z,1520720365.377 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:19:25.770Z,1520720365.770 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:19:26.170Z,1520720366.170 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:19:26.575Z,1520720366.575 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:19:26.967Z,1520720366.967 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:19:27.411Z,1520720367.411 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:19:32.811Z,1520720372.811 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:19:33.014Z,1520720373.014 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:19:33.379Z,1520720373.379 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:19:33.784Z,1520720373.784 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:19:34.180Z,1520720374.180 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:19:34.586Z,1520720374.586 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:19:34.994Z,1520720374.994 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:19:35.375Z,1520720375.375 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:19:35.774Z,1520720375.774 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:19:36.174Z,1520720376.174 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:19:36.575Z,1520720376.575 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:19:36.979Z,1520720376.979 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:19:37.388Z,1520720377.388 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:19:37.782Z,1520720377.782 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:19:38.194Z,1520720378.194 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:19:38.589Z,1520720378.589 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:19:39.010Z,1520720379.010 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:19:39.390Z,1520720379.390 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:19:39.800Z,1520720379.800 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:19:40.175Z,1520720380.175 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:19:40.575Z,1520720380.575 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:19:40.983Z,1520720380.983 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:19:41.406Z,1520720381.406 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:19:41.810Z,1520720381.810 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:19:42.212Z,1520720382.212 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:19:42.584Z,1520720382.584 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:19:42.986Z,1520720382.986 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:19:43.392Z,1520720383.392 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:19:43.793Z,1520720383.793 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:19:44.175Z,1520720384.175 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:19:44.624Z,1520720384.624 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:19:44.996Z,1520720384.996 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:19:45.396Z,1520720385.396 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:19:45.783Z,1520720385.783 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:19:46.223Z,1520720386.223 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:19:46.574Z,1520720386.574 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:19:47.026Z,1520720387.026 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:19:47.469Z,1520720387.469 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:19:47.790Z,1520720387.790 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:19:48.197Z,1520720388.197 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:19:48.583Z,1520720388.583 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:19:48.982Z,1520720388.982 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:19:49.382Z,1520720389.382 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:19:49.798Z,1520720389.798 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:19:50.182Z,1520720390.182 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:19:50.638Z,1520720390.638 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:19:51.032Z,1520720391.032 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:19:51.415Z,1520720391.415 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:19:51.831Z,1520720391.831 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:19:52.248Z,1520720392.248 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:19:52.660Z,1520720392.660 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:19:53.128Z,1520720393.128 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:19:53.463Z,1520720393.463 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:19:53.941Z,1520720393.941 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:19:54.277Z,1520720394.277 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:19:54.677Z,1520720394.677 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:19:55.070Z,1520720395.070 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:19:55.467Z,1520720395.467 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:19:55.850Z,1520720395.850 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:19:56.257Z,1520720396.257 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:19:56.672Z,1520720396.672 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:19:57.068Z,1520720397.068 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:19:57.471Z,1520720397.471 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:19:57.890Z,1520720397.890 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:19:58.266Z,1520720398.266 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:19:58.666Z,1520720398.666 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:19:59.050Z,1520720399.050 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:19:59.471Z,1520720399.471 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:19:59.866Z,1520720399.866 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:20:00.288Z,1520720400.288 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:20:00.677Z,1520720400.677 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:20:01.089Z,1520720401.089 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:20:01.465Z,1520720401.465 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:20:01.852Z,1520720401.852 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:20:02.267Z,1520720402.267 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:20:02.662Z,1520720402.662 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:20:03.066Z,1520720403.066 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:20:03.464Z,1520720403.464 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:20:03.859Z,1520720403.859 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:20:04.249Z,1520720404.249 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:20:04.684Z,1520720404.684 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:20:05.048Z,1520720405.048 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:20:05.454Z,1520720405.454 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:20:05.881Z,1520720405.881 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:20:06.252Z,1520720406.252 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:20:06.655Z,1520720406.655 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:20:07.100Z,1520720407.100 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:20:07.466Z,1520720407.466 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:20:07.867Z,1520720407.867 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:20:08.299Z,1520720408.299 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:20:08.673Z,1520720408.673 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:20:09.053Z,1520720409.053 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:20:09.474Z,1520720409.474 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:20:09.852Z,1520720409.852 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:20:10.303Z,1520720410.303 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:20:10.723Z,1520720410.723 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:20:11.081Z,1520720411.081 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:20:11.484Z,1520720411.484 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:20:12.020Z,1520720412.020 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:20:12.302Z,1520720412.302 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:20:12.722Z,1520720412.722 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:20:13.127Z,1520720413.127 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:20:13.487Z,1520720413.487 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:20:13.891Z,1520720413.891 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:20:14.368Z,1520720414.368 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:20:14.695Z,1520720414.695 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:20:15.067Z,1520720415.067 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:20:15.492Z,1520720415.492 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:20:15.880Z,1520720415.880 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:20:16.267Z,1520720416.267 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:20:16.666Z,1520720416.666 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:20:17.067Z,1520720417.067 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:20:17.472Z,1520720417.472 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:20:17.906Z,1520720417.906 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:20:18.328Z,1520720418.328 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:20:18.678Z,1520720418.678 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:20:19.085Z,1520720419.085 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:20:19.472Z,1520720419.472 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:20:19.875Z,1520720419.875 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:20:20.274Z,1520720420.274 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:20:20.672Z,1520720420.672 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:20:21.067Z,1520720421.067 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:20:21.475Z,1520720421.475 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:20:21.883Z,1520720421.883 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:20:22.276Z,1520720422.276 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:20:22.666Z,1520720422.666 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:20:23.088Z,1520720423.088 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:20:23.489Z,1520720423.489 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:20:23.892Z,1520720423.892 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:20:24.286Z,1520720424.286 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:20:24.672Z,1520720424.672 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:20:25.076Z,1520720425.076 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:20:25.472Z,1520720425.472 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:20:25.531Z,1520720425.531 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-03-10T22:15:25.5Z
2018-03-10T22:20:25.531Z,1520720425.531 [Default:CheckIn:Read_GPS] Stopped
2018-03-10T22:20:25.531Z,1520720425.531 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-03-10T22:20:25.871Z,1520720425.871 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:20:26.626Z,1520720426.626 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:20:26.809Z,1520720426.809 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:20:27.183Z,1520720427.183 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:20:33.592Z,1520720433.592 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:20:33.713Z,1520720433.713 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20180310T051512/Courier0404.lzma
2018-03-10T22:20:33.770Z,1520720433.770 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:20:34.138Z,1520720434.138 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:20:34.502Z,1520720434.502 [DataOverHttps](INFO): Moved sent file to Logs/20180310T051512/Courier0404.lzma.bak
2018-03-10T22:20:34.503Z,1520720434.503 [DataOverHttps](INFO): SBD MOMSN=8008913
2018-03-10T22:20:41.333Z,1520720441.333 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session.
2018-03-10T22:20:43.098Z,1520720443.098 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:20:43.513Z,1520720443.513 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:20:45.185Z,1520720445.185 [CommandLine](IMPORTANT): got command failComponent
2018-03-10T22:20:45.185Z,1520720445.185 [CommandLine](IMPORTANT): Failed components:
2018-03-10T22:20:45.186Z,1520720445.186 [CommandLine](IMPORTANT): No failed Components.
2018-03-10T22:20:48.672Z,1520720448.672 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:20:48.867Z,1520720448.867 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:20:49.216Z,1520720449.216 [DataOverHttps](INFO): Sending 159 bytes from file Logs/20180310T051512/Express0405.lzma
2018-03-10T22:20:49.257Z,1520720449.257 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:20:49.644Z,1520720449.644 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:20:50.017Z,1520720450.017 [DataOverHttps](INFO): Moved sent file to Logs/20180310T051512/Express0405.lzma.bak
2018-03-10T22:20:50.018Z,1520720450.018 [DataOverHttps](INFO): SBD MOMSN=8008918
2018-03-10T22:20:50.041Z,1520720450.041 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:20:50.935Z,1520720450.935 [Default:CheckIn:Read_Iridium] Stopped
2018-03-10T22:20:50.935Z,1520720450.935 [Default:CheckIn:C.Wait] Running Loop=1
2018-03-10T22:20:50.935Z,1520720450.935 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-03-10T22:21:00.298Z,1520720460.298 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:21:00.709Z,1520720460.709 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:21:01.098Z,1520720461.098 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:21:01.502Z,1520720461.502 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:21:01.898Z,1520720461.898 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:21:02.304Z,1520720462.304 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:21:02.703Z,1520720462.703 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:21:03.106Z,1520720463.106 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:21:03.514Z,1520720463.514 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:21:03.898Z,1520720463.898 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:21:04.311Z,1520720464.311 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:21:04.699Z,1520720464.699 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:21:05.102Z,1520720465.102 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:21:05.501Z,1520720465.501 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:21:05.898Z,1520720465.898 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:21:09.903Z,1520720469.903 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:21:10.310Z,1520720470.310 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:21:10.712Z,1520720470.712 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:21:11.099Z,1520720471.099 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:21:11.484Z,1520720471.484 [NAL9602](INFO): Powering down
2018-03-10T22:21:11.533Z,1520720471.533 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:21:11.899Z,1520720471.899 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:21:12.305Z,1520720472.305 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:21:12.706Z,1520720472.706 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:21:13.106Z,1520720473.106 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:21:13.500Z,1520720473.500 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:21:13.900Z,1520720473.900 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:21:14.303Z,1520720474.303 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:21:14.702Z,1520720474.702 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:21:15.098Z,1520720475.098 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:21:15.504Z,1520720475.504 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:21:15.907Z,1520720475.907 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:21:16.301Z,1520720476.301 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:21:16.698Z,1520720476.698 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:21:17.106Z,1520720477.106 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:21:17.499Z,1520720477.499 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:21:17.904Z,1520720477.904 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:21:18.306Z,1520720478.306 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:21:18.696Z,1520720478.696 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:21:19.113Z,1520720479.113 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:21:19.121Z,1520720479.121 [BPC1](ERROR): Failed to receive battery data
2018-03-10T22:21:19.122Z,1520720479.122 [BPC1] Communications Fault, FailCount= 1
2018-03-10T22:21:19.122Z,1520720479.122 [BPC1](ERROR): Communications Fault
2018-03-10T22:21:19.173Z,1520720479.173 [CBIT](ERROR): Communications Fault in component: BPC1
2018-03-10T22:21:19.498Z,1520720479.498 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:21:19.896Z,1520720479.896 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:21:20.309Z,1520720480.309 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:21:20.371Z,1520720480.371 [CBIT](INFO): Clearing failed state for component BPC1
2018-03-10T22:21:20.375Z,1520720480.375 [BPC1] No Fault, FailCount= 1
2018-03-10T22:21:20.712Z,1520720480.712 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:21:21.107Z,1520720481.107 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:21:21.513Z,1520720481.513 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:21:21.892Z,1520720481.892 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:21:22.303Z,1520720482.303 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:21:22.701Z,1520720482.701 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:21:23.103Z,1520720483.103 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:21:23.539Z,1520720483.539 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:21:23.906Z,1520720483.906 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:21:24.307Z,1520720484.307 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:21:24.703Z,1520720484.703 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:21:25.118Z,1520720485.118 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:21:25.508Z,1520720485.508 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:21:25.906Z,1520720485.906 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:21:26.314Z,1520720486.314 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:21:26.706Z,1520720486.706 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:21:27.098Z,1520720487.098 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:21:27.503Z,1520720487.503 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:21:27.898Z,1520720487.898 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:21:28.297Z,1520720488.297 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:21:28.708Z,1520720488.708 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:21:29.114Z,1520720489.114 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:21:29.496Z,1520720489.496 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:21:29.929Z,1520720489.929 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:21:30.296Z,1520720490.296 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:21:30.710Z,1520720490.710 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:21:31.102Z,1520720491.102 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:21:31.504Z,1520720491.504 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:21:31.909Z,1520720491.909 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:21:32.309Z,1520720492.309 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:21:32.702Z,1520720492.702 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:21:32.721Z,1520720492.721 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T22:21:32.721Z,1520720492.721 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 15
2018-03-10T22:21:32.721Z,1520720492.721 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-10T22:21:32.825Z,1520720492.825 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-10T22:21:33.099Z,1520720493.099 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:21:33.226Z,1520720493.226 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-10T22:21:33.226Z,1520720493.226 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 15
2018-03-10T22:21:33.528Z,1520720493.528 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:21:33.612Z,1520720493.612 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-10T22:21:33.613Z,1520720493.613 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-10T22:21:33.614Z,1520720493.614 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-10T22:21:33.896Z,1520720493.896 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:21:34.290Z,1520720494.290 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:21:34.756Z,1520720494.756 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:21:35.108Z,1520720495.108 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:21:35.501Z,1520720495.501 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:21:35.898Z,1520720495.898 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:21:36.298Z,1520720496.298 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:21:36.692Z,1520720496.692 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:21:37.107Z,1520720497.107 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:21:37.510Z,1520720497.510 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:21:37.898Z,1520720497.898 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:21:38.305Z,1520720498.305 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:21:38.698Z,1520720498.698 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:21:39.099Z,1520720499.099 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:21:39.505Z,1520720499.505 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:21:39.896Z,1520720499.896 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:21:40.296Z,1520720500.296 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:21:40.698Z,1520720500.698 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:21:41.098Z,1520720501.098 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:21:41.503Z,1520720501.503 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:21:41.906Z,1520720501.906 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:21:42.310Z,1520720502.310 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:21:42.696Z,1520720502.696 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:21:43.112Z,1520720503.112 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:21:43.498Z,1520720503.498 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:21:43.903Z,1520720503.903 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:21:44.313Z,1520720504.313 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:21:44.705Z,1520720504.705 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:21:45.098Z,1520720505.098 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:21:45.503Z,1520720505.503 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:21:45.904Z,1520720505.904 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:21:46.298Z,1520720506.298 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:21:46.698Z,1520720506.698 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:21:51.114Z,1520720511.114 [BPC1](FAULT): Failed to initialize
2018-03-10T22:21:51.114Z,1520720511.114 [BPC1] Communications Fault, FailCount= 2
2018-03-10T22:21:51.114Z,1520720511.114 [BPC1](ERROR): Communications Fault
2018-03-10T22:21:51.207Z,1520720511.207 [CBIT](ERROR): Communications Fault in component: BPC1
2018-03-10T22:21:56.906Z,1520720516.906 [CBIT](INFO): Clearing failed state for component BPC1
2018-03-10T22:21:56.907Z,1520720516.907 [BPC1] No Fault, FailCount= 2
2018-03-10T22:22:27.582Z,1520720547.582 [BPC1](FAULT): Failed to initialize
2018-03-10T22:22:27.582Z,1520720547.582 [BPC1] Communications Fault, FailCount= 3
2018-03-10T22:22:27.582Z,1520720547.582 [BPC1](ERROR): Communications Fault
2018-03-10T22:22:27.703Z,1520720547.703 [CBIT](ERROR): Communications Fault in component: BPC1
2018-03-10T22:22:28.844Z,1520720548.844 [CBIT](INFO): Clearing failed state for component BPC1
2018-03-10T22:22:28.844Z,1520720548.844 [BPC1] No Fault, FailCount= 3
2018-03-10T22:22:57.174Z,1520720577.174 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:22:57.570Z,1520720577.570 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:22:57.961Z,1520720577.961 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:22:58.352Z,1520720578.352 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:22:58.753Z,1520720578.753 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:22:59.186Z,1520720579.186 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:22:59.603Z,1520720579.603 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:22:59.611Z,1520720579.611 [BPC1](FAULT): Failed to initialize
2018-03-10T22:22:59.611Z,1520720579.611 [BPC1] Communications Fault, FailCount= 4
2018-03-10T22:22:59.611Z,1520720579.611 [BPC1](ERROR): Communications Fault
2018-03-10T22:22:59.713Z,1520720579.713 [CBIT](ERROR): Communications Fault in component: BPC1
2018-03-10T22:22:59.978Z,1520720579.978 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:23:00.383Z,1520720580.383 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:23:00.752Z,1520720580.752 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:23:00.801Z,1520720580.801 [CBIT](INFO): Clearing failed state for component BPC1
2018-03-10T22:23:00.801Z,1520720580.801 [BPC1] No Fault, FailCount= 4
2018-03-10T22:23:01.179Z,1520720581.179 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:23:01.585Z,1520720581.585 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:23:01.962Z,1520720581.962 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:23:02.385Z,1520720582.385 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:23:02.775Z,1520720582.775 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:23:03.182Z,1520720583.182 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:23:03.580Z,1520720583.580 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:23:03.955Z,1520720583.955 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:23:04.361Z,1520720584.361 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:23:04.753Z,1520720584.753 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:23:05.168Z,1520720585.168 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:23:05.608Z,1520720585.608 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:23:05.994Z,1520720585.994 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:23:06.364Z,1520720586.364 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:23:06.753Z,1520720586.753 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:23:07.160Z,1520720587.160 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:23:07.564Z,1520720587.564 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:23:08.018Z,1520720588.018 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:23:08.423Z,1520720588.423 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:23:08.816Z,1520720588.816 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:23:09.220Z,1520720589.220 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:23:09.616Z,1520720589.616 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:23:10.053Z,1520720590.053 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:23:10.419Z,1520720590.419 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:23:10.750Z,1520720590.750 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:23:11.175Z,1520720591.175 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:23:11.599Z,1520720591.599 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:23:12.006Z,1520720592.006 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:23:12.369Z,1520720592.369 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:23:13.954Z,1520720593.954 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:23:14.353Z,1520720594.353 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:23:14.774Z,1520720594.774 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:23:15.160Z,1520720595.160 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:23:15.584Z,1520720595.584 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:23:15.973Z,1520720595.973 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:23:16.388Z,1520720596.388 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:23:16.776Z,1520720596.776 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:23:17.183Z,1520720597.183 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:23:17.560Z,1520720597.560 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:23:17.990Z,1520720597.990 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:23:18.357Z,1520720598.357 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:23:18.774Z,1520720598.774 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:23:19.195Z,1520720599.195 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:23:19.576Z,1520720599.576 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:23:19.963Z,1520720599.963 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:23:20.355Z,1520720600.355 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:23:20.767Z,1520720600.767 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:23:21.158Z,1520720601.158 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:23:21.555Z,1520720601.555 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:23:21.965Z,1520720601.965 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:24:33.919Z,1520720673.919 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T22:24:33.919Z,1520720673.919 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 16
2018-03-10T22:24:33.919Z,1520720673.919 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-10T22:24:34.008Z,1520720674.008 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-10T22:24:34.378Z,1520720674.378 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-10T22:24:34.378Z,1520720674.378 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 16
2018-03-10T22:24:34.792Z,1520720674.792 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-10T22:24:34.793Z,1520720674.793 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-10T22:24:34.793Z,1520720674.793 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-10T22:25:00.734Z,1520720700.734 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:25:01.135Z,1520720701.135 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:25:01.534Z,1520720701.534 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:25:01.934Z,1520720701.934 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:25:02.334Z,1520720702.334 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:25:02.734Z,1520720702.734 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:25:03.134Z,1520720703.134 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:25:03.569Z,1520720703.569 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:25:03.949Z,1520720703.949 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:25:04.386Z,1520720704.386 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:25:04.742Z,1520720704.742 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:25:05.134Z,1520720705.134 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:25:05.532Z,1520720705.532 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:25:05.940Z,1520720705.940 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:25:06.348Z,1520720706.348 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:25:06.737Z,1520720706.737 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:25:07.134Z,1520720707.134 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:25:07.548Z,1520720707.548 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:25:07.942Z,1520720707.942 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:25:08.334Z,1520720708.334 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:25:08.735Z,1520720708.735 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:25:09.134Z,1520720709.134 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:25:09.542Z,1520720709.542 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:25:09.934Z,1520720709.934 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:25:10.374Z,1520720710.374 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:25:10.742Z,1520720710.742 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:25:11.139Z,1520720711.139 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:25:11.588Z,1520720711.588 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:25:11.964Z,1520720711.964 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:25:12.334Z,1520720712.334 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:25:12.734Z,1520720712.734 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:25:13.141Z,1520720713.141 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:25:13.550Z,1520720713.550 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:25:13.960Z,1520720713.960 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:25:14.366Z,1520720714.366 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:25:14.748Z,1520720714.748 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:25:15.145Z,1520720715.145 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:25:15.535Z,1520720715.535 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:25:15.940Z,1520720715.940 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:25:16.377Z,1520720716.377 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:25:16.742Z,1520720716.742 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:25:17.168Z,1520720717.168 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:25:17.534Z,1520720717.534 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:25:17.938Z,1520720717.938 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:25:18.381Z,1520720718.381 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:25:18.742Z,1520720718.742 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:25:19.134Z,1520720719.134 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:25:19.535Z,1520720719.535 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:25:19.938Z,1520720719.938 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:25:20.392Z,1520720720.392 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:25:20.753Z,1520720720.753 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:25:21.158Z,1520720721.158 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:25:21.534Z,1520720721.534 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:25:21.935Z,1520720721.935 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:25:22.334Z,1520720722.334 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:25:22.734Z,1520720722.734 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:25:23.140Z,1520720723.140 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:25:23.542Z,1520720723.542 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:25:23.942Z,1520720723.942 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:25:24.341Z,1520720724.341 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:25:24.742Z,1520720724.742 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:25:25.134Z,1520720725.134 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:25:25.569Z,1520720725.569 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:25:25.941Z,1520720725.941 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:25:26.332Z,1520720726.332 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:25:26.740Z,1520720726.740 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:25:27.134Z,1520720727.134 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:25:27.534Z,1520720727.534 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:25:27.940Z,1520720727.940 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:25:28.361Z,1520720728.361 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:25:28.742Z,1520720728.742 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:25:29.161Z,1520720729.161 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:25:29.534Z,1520720729.534 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:25:29.934Z,1520720729.934 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:25:30.339Z,1520720730.339 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:25:30.741Z,1520720730.741 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:25:31.142Z,1520720731.142 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:25:31.593Z,1520720731.593 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:25:31.976Z,1520720731.976 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:25:32.339Z,1520720732.339 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:25:32.772Z,1520720732.772 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:25:33.180Z,1520720733.180 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:25:33.534Z,1520720733.534 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:25:33.996Z,1520720733.996 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:25:34.364Z,1520720734.364 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:25:34.742Z,1520720734.742 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:25:35.134Z,1520720735.134 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:25:35.535Z,1520720735.535 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:25:35.934Z,1520720735.934 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:25:36.339Z,1520720736.339 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:25:36.752Z,1520720736.752 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:25:37.152Z,1520720737.152 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:25:37.534Z,1520720737.534 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:25:37.933Z,1520720737.933 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:25:38.332Z,1520720738.332 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:25:38.803Z,1520720738.803 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:25:39.165Z,1520720739.165 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:25:39.542Z,1520720739.542 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:25:39.934Z,1520720739.934 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:25:40.334Z,1520720740.334 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:25:40.728Z,1520720740.728 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:25:41.134Z,1520720741.134 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:25:41.545Z,1520720741.545 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:25:41.977Z,1520720741.977 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:25:42.384Z,1520720742.384 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:25:42.780Z,1520720742.780 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:25:43.175Z,1520720743.175 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:25:43.571Z,1520720743.571 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:25:43.941Z,1520720743.941 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:25:44.352Z,1520720744.352 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:25:44.760Z,1520720744.760 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:25:45.146Z,1520720745.146 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:25:45.535Z,1520720745.535 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:25:45.936Z,1520720745.936 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:25:46.338Z,1520720746.338 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:25:46.784Z,1520720746.784 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:25:47.156Z,1520720747.156 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:25:47.567Z,1520720747.567 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:25:47.935Z,1520720747.935 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:25:48.337Z,1520720748.337 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:25:48.732Z,1520720748.732 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:25:49.157Z,1520720749.157 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:25:49.542Z,1520720749.542 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:25:49.939Z,1520720749.939 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:25:50.342Z,1520720750.342 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:25:50.795Z,1520720750.795 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:25:51.134Z,1520720751.134 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:25:51.195Z,1520720751.195 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-03-10T22:25:51.204Z,1520720751.204 [Default:CheckIn:C.Wait] Stopped
2018-03-10T22:25:51.204Z,1520720751.204 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-03-10T22:25:51.204Z,1520720751.204 [Default:CheckIn:D] Running Loop=1
2018-03-10T22:25:51.539Z,1520720751.539 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:25:51.619Z,1520720751.619 [Default:CheckIn:D] Stopped
2018-03-10T22:25:51.620Z,1520720751.620 [Default:CheckIn:E] Running Loop=1
2018-03-10T22:25:51.952Z,1520720751.952 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:25:52.021Z,1520720752.021 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1026.561654 min 
2018-03-10T22:25:52.021Z,1520720752.021 [Default:CheckIn:E] Stopped
2018-03-10T22:25:52.022Z,1520720752.022 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-03-10T22:25:52.022Z,1520720752.022 [Default:CheckIn] Stopped
2018-03-10T22:25:52.022Z,1520720752.022 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-03-10T22:25:52.022Z,1520720752.022 [Default:CheckIn](INFO): Running loop #102
2018-03-10T22:25:52.023Z,1520720752.023 [Default:CheckIn] Running Loop=102
2018-03-10T22:25:52.023Z,1520720752.023 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-03-10T22:25:52.023Z,1520720752.023 [Default:CheckIn:Read_GPS] Running Loop=1
2018-03-10T22:25:52.340Z,1520720752.340 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:25:57.408Z,1520720757.408 [NAL9602](INFO): Powering up
2018-03-10T22:25:57.450Z,1520720757.450 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:25:57.526Z,1520720757.526 [CBIT](DEBUG): EFC running - data check-sum false
2018-03-10T22:25:57.599Z,1520720757.599 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:25:57.972Z,1520720757.972 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:25:58.383Z,1520720758.383 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:25:58.792Z,1520720758.792 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:25:59.178Z,1520720759.178 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:25:59.571Z,1520720759.571 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:25:59.982Z,1520720759.982 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:26:00.379Z,1520720760.379 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:26:00.850Z,1520720760.850 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:26:01.218Z,1520720761.218 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:26:01.586Z,1520720761.586 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:26:02.005Z,1520720762.005 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:26:02.423Z,1520720762.423 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:26:02.779Z,1520720762.779 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:26:03.232Z,1520720763.232 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:26:03.573Z,1520720763.573 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:26:03.986Z,1520720763.986 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:26:04.407Z,1520720764.407 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:26:04.775Z,1520720764.775 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:26:05.186Z,1520720765.186 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:26:05.567Z,1520720765.567 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:26:05.985Z,1520720765.985 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:26:06.387Z,1520720766.387 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:26:06.775Z,1520720766.775 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:26:07.178Z,1520720767.178 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:26:07.575Z,1520720767.575 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:26:07.988Z,1520720767.988 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:26:08.417Z,1520720768.417 [NAL9602](INFO): NAL9602 initialized
2018-03-10T22:26:08.468Z,1520720768.468 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:26:08.817Z,1520720768.817 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:26:09.177Z,1520720769.177 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-03-10T22:26:09.177Z,1520720769.177 [NAL9602] Data Fault, FailCount= 2
2018-03-10T22:26:09.178Z,1520720769.178 [NAL9602](ERROR): Data Fault
2018-03-10T22:26:09.239Z,1520720769.239 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:26:09.333Z,1520720769.333 [CBIT](ERROR): Data Fault in component: NAL9602
2018-03-10T22:26:09.572Z,1520720769.572 [NAL9602](INFO): Powering down
2018-03-10T22:26:09.621Z,1520720769.621 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:26:10.019Z,1520720770.019 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:26:10.431Z,1520720770.431 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:26:10.514Z,1520720770.514 [CBIT](INFO): Clearing failed state for component NAL9602
2018-03-10T22:26:10.514Z,1520720770.514 [NAL9602] No Fault, FailCount= 2
2018-03-10T22:26:10.772Z,1520720770.772 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:26:11.205Z,1520720771.205 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:26:11.614Z,1520720771.614 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:26:11.987Z,1520720771.987 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:26:12.383Z,1520720772.383 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:26:12.776Z,1520720772.776 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:26:13.176Z,1520720773.176 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:26:13.587Z,1520720773.587 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:26:13.979Z,1520720773.979 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:26:14.381Z,1520720774.381 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:26:14.775Z,1520720774.775 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:26:15.168Z,1520720775.168 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:26:15.626Z,1520720775.626 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:26:16.012Z,1520720776.012 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:26:16.410Z,1520720776.410 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:26:16.796Z,1520720776.796 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:26:17.221Z,1520720777.221 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:26:17.575Z,1520720777.575 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:26:18.028Z,1520720778.028 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:26:18.366Z,1520720778.366 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:26:18.780Z,1520720778.780 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:26:19.211Z,1520720779.211 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:26:19.585Z,1520720779.585 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:26:19.976Z,1520720779.976 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:26:20.383Z,1520720780.383 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:26:20.784Z,1520720780.784 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:26:21.189Z,1520720781.189 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:26:21.580Z,1520720781.580 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:26:21.971Z,1520720781.971 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:26:22.371Z,1520720782.371 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:26:22.776Z,1520720782.776 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:26:23.265Z,1520720783.265 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:26:23.628Z,1520720783.628 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:26:23.981Z,1520720783.981 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:26:24.396Z,1520720784.396 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:26:24.843Z,1520720784.843 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:26:25.175Z,1520720785.175 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:26:25.615Z,1520720785.615 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:26:25.992Z,1520720785.992 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:26:26.412Z,1520720786.412 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:26:26.796Z,1520720786.796 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:26:27.179Z,1520720787.179 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:26:27.576Z,1520720787.576 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:26:27.988Z,1520720787.988 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:26:28.374Z,1520720788.374 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:26:28.775Z,1520720788.775 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:26:29.177Z,1520720789.177 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:26:29.580Z,1520720789.580 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:26:29.966Z,1520720789.966 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:26:30.452Z,1520720790.452 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:26:30.802Z,1520720790.802 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:26:31.195Z,1520720791.195 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:26:31.598Z,1520720791.598 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:26:32.017Z,1520720792.017 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:26:32.417Z,1520720792.417 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:26:32.814Z,1520720792.814 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:26:33.179Z,1520720793.179 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:26:33.606Z,1520720793.606 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:26:33.984Z,1520720793.984 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:26:34.381Z,1520720794.381 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:26:34.796Z,1520720794.796 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:26:35.179Z,1520720795.179 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:26:35.585Z,1520720795.585 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:26:35.992Z,1520720795.992 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:26:36.371Z,1520720796.371 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:26:36.775Z,1520720796.775 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:26:37.172Z,1520720797.172 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:26:37.575Z,1520720797.575 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:26:38.068Z,1520720798.068 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:26:38.405Z,1520720798.405 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:26:38.795Z,1520720798.795 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:26:39.209Z,1520720799.209 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:26:39.601Z,1520720799.601 [NAL9602](INFO): Powering up NAL9602
2018-03-10T22:26:39.623Z,1520720799.623 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:26:39.980Z,1520720799.980 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:26:40.418Z,1520720800.418 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:26:40.796Z,1520720800.796 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:26:41.213Z,1520720801.213 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:26:41.578Z,1520720801.578 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:26:41.986Z,1520720801.986 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:26:42.379Z,1520720802.379 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:26:42.782Z,1520720802.782 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:26:43.185Z,1520720803.185 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:26:43.579Z,1520720803.579 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:26:43.966Z,1520720803.966 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:26:44.375Z,1520720804.375 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:26:50.765Z,1520720810.765 [NAL9602](INFO): NAL9602 initialized
2018-03-10T22:27:13.998Z,1520720833.998 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:27:14.390Z,1520720834.390 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:27:14.814Z,1520720834.814 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:27:15.232Z,1520720835.232 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:27:15.616Z,1520720835.616 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:27:16.001Z,1520720836.001 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:27:16.409Z,1520720836.409 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:27:16.826Z,1520720836.826 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:27:17.198Z,1520720837.198 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:27:17.624Z,1520720837.624 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:27:18.002Z,1520720838.002 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:27:18.413Z,1520720838.413 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:27:18.828Z,1520720838.828 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:27:19.205Z,1520720839.205 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:27:19.595Z,1520720839.595 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:27:20.016Z,1520720840.016 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:27:20.388Z,1520720840.388 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:27:20.808Z,1520720840.808 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:27:21.205Z,1520720841.205 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:27:21.593Z,1520720841.593 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:27:22.002Z,1520720842.002 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:27:22.399Z,1520720842.399 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:27:22.796Z,1520720842.796 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:27:23.248Z,1520720843.248 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:27:23.635Z,1520720843.635 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:27:24.042Z,1520720844.042 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:27:24.414Z,1520720844.414 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:27:24.809Z,1520720844.809 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:27:25.217Z,1520720845.217 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:27:25.588Z,1520720845.588 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:27:26.030Z,1520720846.030 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:27:26.393Z,1520720846.393 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:27:26.808Z,1520720846.808 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:27:27.215Z,1520720847.215 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:27:27.588Z,1520720847.588 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:27:27.996Z,1520720847.996 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:27:28.422Z,1520720848.422 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:27:28.798Z,1520720848.798 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:27:29.202Z,1520720849.202 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:27:29.606Z,1520720849.606 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:27:29.000Z,1520720850.000 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:27:30.390Z,1520720850.390 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:27:30.786Z,1520720850.786 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:27:31.190Z,1520720851.190 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:27:31.617Z,1520720851.617 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:27:32.042Z,1520720852.042 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:27:32.428Z,1520720852.428 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:27:32.796Z,1520720852.796 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:27:33.207Z,1520720853.207 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:27:33.630Z,1520720853.630 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:27:33.998Z,1520720853.998 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:27:34.447Z,1520720854.447 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:27:34.799Z,1520720854.799 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:27:34.872Z,1520720854.872 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T22:27:34.872Z,1520720854.872 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 17
2018-03-10T22:27:34.872Z,1520720854.872 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-10T22:27:34.885Z,1520720854.885 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-10T22:27:35.197Z,1520720855.197 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:27:35.254Z,1520720855.254 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-10T22:27:35.254Z,1520720855.254 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 17
2018-03-10T22:27:35.625Z,1520720855.625 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:27:35.658Z,1520720855.658 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-10T22:27:35.658Z,1520720855.658 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-10T22:27:35.658Z,1520720855.658 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-10T22:27:35.987Z,1520720855.987 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:27:36.387Z,1520720856.387 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:28:42.296Z,1520720922.296 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:28:42.678Z,1520720922.678 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:28:43.072Z,1520720923.072 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:28:47.089Z,1520720927.089 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:28:47.484Z,1520720927.484 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:28:47.873Z,1520720927.873 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:28:48.274Z,1520720928.274 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:28:48.681Z,1520720928.681 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:28:49.067Z,1520720929.067 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:28:49.476Z,1520720929.476 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:28:49.875Z,1520720929.875 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:28:50.267Z,1520720930.267 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:28:50.696Z,1520720930.696 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:28:51.078Z,1520720931.078 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:28:51.470Z,1520720931.470 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:28:51.881Z,1520720931.881 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:28:52.272Z,1520720932.272 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:28:52.668Z,1520720932.668 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:28:57.619Z,1520720937.619 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:28:57.768Z,1520720937.768 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:28:58.196Z,1520720938.196 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:29:15.373Z,1520720955.373 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:29:15.774Z,1520720955.774 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:29:16.190Z,1520720956.190 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:29:16.588Z,1520720956.588 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:29:16.986Z,1520720956.986 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:29:17.367Z,1520720957.367 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:29:17.772Z,1520720957.772 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:29:18.167Z,1520720958.167 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:29:18.574Z,1520720958.574 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:29:18.971Z,1520720958.971 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:29:19.370Z,1520720959.370 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:29:19.770Z,1520720959.770 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:29:20.180Z,1520720960.180 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:29:20.568Z,1520720960.568 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:29:20.972Z,1520720960.972 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:29:21.376Z,1520720961.376 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:29:21.770Z,1520720961.770 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:29:22.168Z,1520720962.168 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:29:22.562Z,1520720962.562 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:29:22.963Z,1520720962.963 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:29:23.372Z,1520720963.372 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:29:23.778Z,1520720963.778 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:29:24.168Z,1520720964.168 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:29:24.563Z,1520720964.563 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:29:24.962Z,1520720964.962 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:29:25.375Z,1520720965.375 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:29:25.784Z,1520720965.784 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:29:26.171Z,1520720966.171 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:29:26.582Z,1520720966.582 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:29:26.978Z,1520720966.978 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:29:27.373Z,1520720967.373 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:29:27.772Z,1520720967.772 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:29:28.179Z,1520720968.179 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:29:28.571Z,1520720968.571 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:29:28.963Z,1520720968.963 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:29:29.370Z,1520720969.370 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:29:29.769Z,1520720969.769 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:29:30.169Z,1520720970.169 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:29:30.568Z,1520720970.568 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:29:30.971Z,1520720970.971 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:29:31.364Z,1520720971.364 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:29:31.771Z,1520720971.771 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:29:32.171Z,1520720972.171 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:29:32.562Z,1520720972.562 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:29:32.963Z,1520720972.963 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:29:33.363Z,1520720973.363 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:29:33.763Z,1520720973.763 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:29:34.163Z,1520720974.163 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:29:34.571Z,1520720974.571 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:29:34.986Z,1520720974.986 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:29:35.384Z,1520720975.384 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:29:35.762Z,1520720975.762 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:29:36.163Z,1520720976.163 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:29:36.563Z,1520720976.563 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:29:36.963Z,1520720976.963 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:29:37.376Z,1520720977.376 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:29:37.776Z,1520720977.776 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:30:05.274Z,1520721005.274 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:30:05.657Z,1520721005.657 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:30:06.048Z,1520721006.048 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:30:06.468Z,1520721006.468 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:30:06.845Z,1520721006.845 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:30:07.261Z,1520721007.261 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:30:07.661Z,1520721007.661 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:30:08.062Z,1520721008.062 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:30:08.447Z,1520721008.447 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:30:29.256Z,1520721029.256 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:30:29.652Z,1520721029.652 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:30:30.069Z,1520721030.069 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:30:30.459Z,1520721030.459 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:30:30.844Z,1520721030.844 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:30:31.258Z,1520721031.258 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:30:31.656Z,1520721031.656 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:30:32.053Z,1520721032.053 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:30:32.452Z,1520721032.452 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:30:32.854Z,1520721032.854 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:30:33.256Z,1520721033.256 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:30:33.648Z,1520721033.648 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:30:34.086Z,1520721034.086 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:30:34.451Z,1520721034.451 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:30:34.881Z,1520721034.881 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:30:35.697Z,1520721035.697 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T22:30:35.697Z,1520721035.697 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 18
2018-03-10T22:30:35.697Z,1520721035.697 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-10T22:30:35.718Z,1520721035.718 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-10T22:30:36.132Z,1520721036.132 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-10T22:30:36.132Z,1520721036.132 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 18
2018-03-10T22:30:36.455Z,1520721036.455 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:30:36.480Z,1520721036.480 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-10T22:30:36.481Z,1520721036.481 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-10T22:30:36.481Z,1520721036.481 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-10T22:30:36.852Z,1520721036.852 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:30:37.243Z,1520721037.243 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:30:37.650Z,1520721037.650 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:30:38.047Z,1520721038.047 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:30:38.499Z,1520721038.499 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:30:38.886Z,1520721038.886 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:30:39.241Z,1520721039.241 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:30:39.664Z,1520721039.664 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:30:40.064Z,1520721040.064 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:30:40.481Z,1520721040.481 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:30:40.854Z,1520721040.854 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:30:41.259Z,1520721041.259 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:30:41.660Z,1520721041.660 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:30:42.073Z,1520721042.073 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:30:42.444Z,1520721042.444 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:30:42.845Z,1520721042.845 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:30:43.246Z,1520721043.246 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:30:52.130Z,1520721052.130 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-03-10T22:25:52.0Z
2018-03-10T22:30:52.130Z,1520721052.130 [Default:CheckIn:Read_GPS] Stopped
2018-03-10T22:30:52.130Z,1520721052.130 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-03-10T22:30:59.423Z,1520721059.423 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20180310T051512/Courier0408.lzma
2018-03-10T22:30:59.504Z,1520721059.504 [BPC1](ERROR): Failed to receive battery data
2018-03-10T22:30:59.504Z,1520721059.504 [BPC1] Communications Fault, FailCount= 1
2018-03-10T22:30:59.504Z,1520721059.504 [BPC1](ERROR): Communications Fault
2018-03-10T22:30:59.536Z,1520721059.536 [CBIT](ERROR): Communications Fault in component: BPC1
2018-03-10T22:31:00.222Z,1520721060.222 [DataOverHttps](INFO): Moved sent file to Logs/20180310T051512/Courier0408.lzma.bak
2018-03-10T22:31:00.223Z,1520721060.223 [DataOverHttps](INFO): SBD MOMSN=8008983
2018-03-10T22:31:01.300Z,1520721061.300 [CBIT](INFO): Clearing failed state for component BPC1
2018-03-10T22:31:01.301Z,1520721061.301 [BPC1] No Fault, FailCount= 1
2018-03-10T22:31:13.812Z,1520721073.812 [DataOverHttps](INFO): Sending 294 bytes from file Logs/20180310T051512/Express0409.lzma
2018-03-10T22:31:14.606Z,1520721074.606 [DataOverHttps](INFO): Moved sent file to Logs/20180310T051512/Express0409.lzma.bak
2018-03-10T22:31:14.607Z,1520721074.607 [DataOverHttps](INFO): SBD MOMSN=8008985
2018-03-10T22:31:18.866Z,1520721078.866 [Default:CheckIn:Read_Iridium] Stopped
2018-03-10T22:31:18.867Z,1520721078.867 [Default:CheckIn:C.Wait] Running Loop=1
2018-03-10T22:31:18.867Z,1520721078.867 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-03-10T22:31:31.654Z,1520721091.654 [BPC1](FAULT): Failed to initialize
2018-03-10T22:31:31.654Z,1520721091.654 [BPC1] Communications Fault, FailCount= 2
2018-03-10T22:31:31.654Z,1520721091.654 [BPC1](ERROR): Communications Fault
2018-03-10T22:31:31.749Z,1520721091.749 [CBIT](ERROR): Communications Fault in component: BPC1
2018-03-10T22:31:32.896Z,1520721092.896 [CBIT](INFO): Clearing failed state for component BPC1
2018-03-10T22:31:32.897Z,1520721092.897 [BPC1] No Fault, FailCount= 2
2018-03-10T22:31:57.986Z,1520721117.986 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session.
2018-03-10T22:32:03.610Z,1520721123.610 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:32:03.619Z,1520721123.619 [BPC1](FAULT): Failed to initialize
2018-03-10T22:32:03.619Z,1520721123.619 [BPC1] Communications Fault, FailCount= 3
2018-03-10T22:32:03.619Z,1520721123.619 [BPC1](ERROR): Communications Fault
2018-03-10T22:32:03.700Z,1520721123.700 [CBIT](ERROR): Communications Fault in component: BPC1
2018-03-10T22:32:04.006Z,1520721124.006 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:32:04.406Z,1520721124.406 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:32:04.812Z,1520721124.812 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:32:04.911Z,1520721124.911 [CBIT](INFO): Clearing failed state for component BPC1
2018-03-10T22:32:04.912Z,1520721124.912 [BPC1] No Fault, FailCount= 3
2018-03-10T22:32:05.206Z,1520721125.206 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:32:05.615Z,1520721125.615 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:32:06.006Z,1520721126.006 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:32:06.404Z,1520721126.404 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:32:06.820Z,1520721126.820 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:32:28.700Z,1520721148.700 [NAL9602](INFO): Powering down
2018-03-10T22:32:35.530Z,1520721155.530 [BPC1](FAULT): Failed to initialize
2018-03-10T22:32:35.530Z,1520721155.530 [BPC1] Communications Fault, FailCount= 4
2018-03-10T22:32:35.530Z,1520721155.530 [BPC1](ERROR): Communications Fault
2018-03-10T22:32:35.615Z,1520721155.615 [CBIT](ERROR): Communications Fault in component: BPC1
2018-03-10T22:32:36.836Z,1520721156.836 [CBIT](INFO): Clearing failed state for component BPC1
2018-03-10T22:32:36.836Z,1520721156.836 [BPC1] No Fault, FailCount= 4
2018-03-10T22:32:57.915Z,1520721177.915 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:32:58.319Z,1520721178.319 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:32:58.723Z,1520721178.723 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:32:59.128Z,1520721179.128 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:32:59.519Z,1520721179.519 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:32:59.920Z,1520721179.920 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:33:00.320Z,1520721180.320 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:33:00.724Z,1520721180.724 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:33:01.132Z,1520721181.132 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:33:01.515Z,1520721181.515 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:33:01.923Z,1520721181.923 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:33:02.331Z,1520721182.331 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:33:02.723Z,1520721182.723 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:33:03.116Z,1520721183.116 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:33:03.516Z,1520721183.516 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:33:03.921Z,1520721183.921 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:33:04.332Z,1520721184.332 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:33:04.715Z,1520721184.715 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:33:05.112Z,1520721185.112 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:33:05.519Z,1520721185.519 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:33:05.930Z,1520721185.930 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:33:06.314Z,1520721186.314 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:33:06.718Z,1520721186.718 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:33:07.117Z,1520721187.117 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:33:07.515Z,1520721187.515 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:33:07.922Z,1520721187.922 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:33:08.320Z,1520721188.320 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:33:08.716Z,1520721188.716 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:33:09.122Z,1520721189.122 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:33:09.514Z,1520721189.514 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:33:09.917Z,1520721189.917 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:33:10.314Z,1520721190.314 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:33:10.724Z,1520721190.724 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:33:11.131Z,1520721191.131 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:33:11.519Z,1520721191.519 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:33:11.919Z,1520721191.919 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:33:12.321Z,1520721192.321 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:33:12.724Z,1520721192.724 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:33:13.127Z,1520721193.127 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:33:13.524Z,1520721193.524 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:33:13.922Z,1520721193.922 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:33:14.315Z,1520721194.315 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:33:14.714Z,1520721194.714 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:33:15.133Z,1520721195.133 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:33:15.515Z,1520721195.515 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:33:15.921Z,1520721195.921 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:33:16.314Z,1520721196.314 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:33:16.719Z,1520721196.719 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:33:17.118Z,1520721197.118 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:33:17.528Z,1520721197.528 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:33:17.914Z,1520721197.914 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:33:19.509Z,1520721199.509 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:33:19.915Z,1520721199.915 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:33:24.999Z,1520721204.999 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:33:25.170Z,1520721205.170 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:33:25.550Z,1520721205.550 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:33:25.957Z,1520721205.957 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:33:26.313Z,1520721206.313 [DataOverHttps](IMPORTANT): SBD MTMSN=20180310T223325
2018-03-10T22:33:26.412Z,1520721206.412 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:33:26.746Z,1520721206.746 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:33:27.150Z,1520721207.150 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:33:32.197Z,1520721212.197 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:33:32.353Z,1520721212.353 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:33:32.765Z,1520721212.765 [DataOverHttps](INFO): Received command:configSet CBIT.stopDepth 175 meter persist;configSet CBIT.abortDepth 200 meter persist
2018-03-10T22:33:33.085Z,1520721213.085 [CommandLine](IMPORTANT): got command configSet CBIT.stopDepth 175.000000 meter persist
2018-03-10T22:33:33.113Z,1520721213.113 [CommandLine](IMPORTANT): got command configSet CBIT.abortDepth 200.000000 meter persist
2018-03-10T22:33:33.168Z,1520721213.168 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:33:33.307Z,1520721213.307 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:33:33.661Z,1520721213.661 [DataOverHttps](IMPORTANT): SBD MTMSN=20180310T223332
2018-03-10T22:33:33.687Z,1520721213.687 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:33:34.082Z,1520721214.082 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:33:34.492Z,1520721214.492 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:33:39.591Z,1520721219.591 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:33:39.622Z,1520721219.622 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T22:33:39.622Z,1520721219.622 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 19
2018-03-10T22:33:39.622Z,1520721219.622 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-10T22:33:39.697Z,1520721219.697 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-10T22:33:39.779Z,1520721219.779 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:33:39.866Z,1520721219.866 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-10T22:33:39.866Z,1520721219.866 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 19
2018-03-10T22:33:40.119Z,1520721220.119 [DataOverHttps](INFO): Received command:configSet CBIT.stopDepth 175 meter persist;configSet CBIT.abortDepth 200 meter persist;;
2018-03-10T22:33:40.456Z,1520721220.456 [CommandLine](IMPORTANT): got command configSet CBIT.stopDepth 175.000000 meter persist
2018-03-10T22:33:40.459Z,1520721220.459 [CommandLine](IMPORTANT): got command configSet CBIT.abortDepth 200.000000 meter persist
2018-03-10T22:33:40.479Z,1520721220.479 [CommandLine](IMPORTANT): got command 
2018-03-10T22:33:40.479Z,1520721220.479 [CommandLine](FAULT): Syntax error. Try: help
2018-03-10T22:33:40.567Z,1520721220.567 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:33:40.621Z,1520721220.621 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-10T22:33:40.621Z,1520721220.621 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-10T22:33:40.621Z,1520721220.621 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-10T22:33:40.743Z,1520721220.743 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:33:41.104Z,1520721221.104 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:33:41.504Z,1520721221.504 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:33:41.905Z,1520721221.905 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:33:42.309Z,1520721222.309 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:33:42.711Z,1520721222.711 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:33:43.107Z,1520721223.107 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:33:43.521Z,1520721223.521 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:33:43.903Z,1520721223.903 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:33:44.310Z,1520721224.310 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:33:44.699Z,1520721224.699 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:33:45.098Z,1520721225.098 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:33:45.498Z,1520721225.498 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:33:45.911Z,1520721225.911 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:33:46.305Z,1520721226.305 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:33:46.699Z,1520721226.699 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:33:47.099Z,1520721227.099 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:33:47.512Z,1520721227.512 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:33:47.908Z,1520721227.908 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:33:48.299Z,1520721228.299 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:33:48.699Z,1520721228.699 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:33:49.107Z,1520721229.107 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:33:49.509Z,1520721229.509 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:33:49.898Z,1520721229.898 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:33:50.308Z,1520721230.308 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:33:50.706Z,1520721230.706 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:33:51.106Z,1520721231.106 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:33:51.510Z,1520721231.510 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:33:51.909Z,1520721231.909 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:33:52.298Z,1520721232.298 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:33:52.704Z,1520721232.704 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:33:53.111Z,1520721233.111 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:33:53.505Z,1520721233.505 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:33:53.904Z,1520721233.904 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:33:54.303Z,1520721234.303 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:33:54.707Z,1520721234.707 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:33:55.112Z,1520721235.112 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:33:55.511Z,1520721235.511 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:33:55.898Z,1520721235.898 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:33:56.299Z,1520721236.299 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:33:56.704Z,1520721236.704 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:33:57.105Z,1520721237.105 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:33:57.499Z,1520721237.499 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:33:57.912Z,1520721237.912 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:33:58.307Z,1520721238.307 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:33:58.701Z,1520721238.701 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:33:59.114Z,1520721239.114 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:33:59.509Z,1520721239.509 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:33:59.904Z,1520721239.904 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:34:00.305Z,1520721240.305 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:34:00.698Z,1520721240.698 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:34:01.104Z,1520721241.104 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:34:01.505Z,1520721241.505 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:34:01.898Z,1520721241.898 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:34:02.300Z,1520721242.300 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:34:02.704Z,1520721242.704 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:34:03.111Z,1520721243.111 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:34:03.507Z,1520721243.507 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:34:03.912Z,1520721243.912 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:34:04.299Z,1520721244.299 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:34:04.698Z,1520721244.698 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:34:05.108Z,1520721245.108 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:34:05.504Z,1520721245.504 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:34:05.904Z,1520721245.904 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:34:06.304Z,1520721246.304 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:34:06.698Z,1520721246.698 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:34:07.107Z,1520721247.107 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:34:07.499Z,1520721247.499 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:34:07.898Z,1520721247.898 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:34:08.299Z,1520721248.299 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:34:08.712Z,1520721248.712 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:34:09.113Z,1520721249.113 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:34:09.498Z,1520721249.498 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:34:09.900Z,1520721249.900 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:34:10.307Z,1520721250.307 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:34:10.704Z,1520721250.704 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:34:11.099Z,1520721251.099 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:34:11.498Z,1520721251.498 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:34:11.898Z,1520721251.898 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:34:12.299Z,1520721252.299 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:34:12.698Z,1520721252.698 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:34:13.103Z,1520721253.103 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:34:13.506Z,1520721253.506 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:34:13.908Z,1520721253.908 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:34:14.298Z,1520721254.298 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:34:14.700Z,1520721254.700 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:34:15.104Z,1520721255.104 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:34:15.507Z,1520721255.507 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:34:15.911Z,1520721255.911 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:34:16.298Z,1520721256.298 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:34:16.703Z,1520721256.703 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:34:17.112Z,1520721257.112 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:34:17.506Z,1520721257.506 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:34:17.893Z,1520721257.893 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:34:18.299Z,1520721258.299 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:34:18.698Z,1520721258.698 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:34:19.098Z,1520721259.098 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:34:19.503Z,1520721259.503 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:34:19.898Z,1520721259.898 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:34:20.304Z,1520721260.304 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:34:20.704Z,1520721260.704 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:34:21.115Z,1520721261.115 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:34:21.505Z,1520721261.505 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:34:21.899Z,1520721261.899 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:34:22.308Z,1520721262.308 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:34:22.702Z,1520721262.702 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:34:23.110Z,1520721263.110 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:34:23.510Z,1520721263.510 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:34:23.906Z,1520721263.906 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:34:24.304Z,1520721264.304 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:34:24.702Z,1520721264.702 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:34:25.109Z,1520721265.109 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:34:25.505Z,1520721265.505 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:34:25.898Z,1520721265.898 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:34:26.307Z,1520721266.307 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:34:26.707Z,1520721266.707 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:34:27.106Z,1520721267.106 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:34:27.498Z,1520721267.498 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:34:27.912Z,1520721267.912 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:34:28.306Z,1520721268.306 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:34:28.706Z,1520721268.706 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:34:29.105Z,1520721269.105 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:34:29.498Z,1520721269.498 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:34:29.985Z,1520721269.985 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:34:30.307Z,1520721270.307 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:34:30.698Z,1520721270.698 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:34:31.098Z,1520721271.098 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:34:31.512Z,1520721271.512 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:34:31.906Z,1520721271.906 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:34:32.307Z,1520721272.307 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:34:32.697Z,1520721272.697 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:34:33.108Z,1520721273.108 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:34:33.507Z,1520721273.507 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:34:33.907Z,1520721273.907 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:34:34.298Z,1520721274.298 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:34:34.698Z,1520721274.698 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:34:39.798Z,1520721279.798 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:34:39.996Z,1520721279.996 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:34:40.354Z,1520721280.354 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:34:40.721Z,1520721280.721 [DataOverHttps](IMPORTANT): SBD MTMSN=20180310T223440
2018-03-10T22:34:40.776Z,1520721280.776 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:34:41.153Z,1520721281.153 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:34:41.543Z,1520721281.543 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:34:46.595Z,1520721286.595 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:34:46.763Z,1520721286.763 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:34:47.112Z,1520721287.112 [DataOverHttps](INFO): Received command:configSet list
2018-03-10T22:34:47.184Z,1520721287.184 [CommandLine](IMPORTANT): got command configSet list
2018-03-10T22:34:47.184Z,1520721287.184 [CommandLine](IMPORTANT): Listing configuration overrides from Data/persisted.cfg
2018-03-10T22:34:47.185Z,1520721287.185 [CommandLine](IMPORTANT): BuoyancyServo.limitLo=500 count;

2018-03-10T22:34:47.185Z,1520721287.185 [CommandLine](IMPORTANT): CBIT.abortDepth=200 meter;

2018-03-10T22:34:47.185Z,1520721287.185 [CommandLine](IMPORTANT): CBIT.stopDepth=175 meter;

2018-03-10T22:34:47.185Z,1520721287.185 [CommandLine](IMPORTANT): VerticalControl.buoyancyNeutral=300 cubic_centimeter;

2018-03-10T22:34:47.236Z,1520721287.236 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:34:47.550Z,1520721287.550 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:34:47.939Z,1520721287.939 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:34:48.338Z,1520721288.338 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:34:48.733Z,1520721288.733 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:34:49.127Z,1520721289.127 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:34:49.541Z,1520721289.541 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:34:49.991Z,1520721289.991 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:34:50.336Z,1520721290.336 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:34:50.806Z,1520721290.806 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:34:51.230Z,1520721291.230 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:34:51.534Z,1520721291.534 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:34:51.937Z,1520721291.937 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:34:52.330Z,1520721292.330 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:34:52.735Z,1520721292.735 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:34:53.128Z,1520721293.128 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:34:53.577Z,1520721293.577 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:34:53.977Z,1520721293.977 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:34:54.360Z,1520721294.360 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:34:54.793Z,1520721294.793 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:34:55.130Z,1520721295.130 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:34:55.534Z,1520721295.534 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:34:55.933Z,1520721295.933 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:34:56.326Z,1520721296.326 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:34:56.726Z,1520721296.726 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:34:57.126Z,1520721297.126 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:34:57.524Z,1520721297.524 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:34:57.926Z,1520721297.926 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:34:58.327Z,1520721298.327 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:34:58.736Z,1520721298.736 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:34:59.132Z,1520721299.132 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:34:59.540Z,1520721299.540 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:34:59.935Z,1520721299.935 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:35:00.335Z,1520721300.335 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:35:00.732Z,1520721300.732 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:35:01.140Z,1520721301.140 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:35:01.537Z,1520721301.537 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:35:01.939Z,1520721301.939 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:35:02.326Z,1520721302.326 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:35:02.736Z,1520721302.736 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:35:03.140Z,1520721303.140 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:35:03.547Z,1520721303.547 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:35:03.941Z,1520721303.941 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:35:04.336Z,1520721304.336 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:35:04.726Z,1520721304.726 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:35:05.126Z,1520721305.126 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:35:05.527Z,1520721305.527 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:35:05.933Z,1520721305.933 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:35:06.326Z,1520721306.326 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:35:06.727Z,1520721306.727 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:35:07.133Z,1520721307.133 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:35:07.529Z,1520721307.529 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:35:07.931Z,1520721307.931 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:35:08.328Z,1520721308.328 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:35:08.732Z,1520721308.732 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:35:09.131Z,1520721309.131 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:35:09.535Z,1520721309.535 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:35:09.937Z,1520721309.937 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:35:10.334Z,1520721310.334 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:35:10.726Z,1520721310.726 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:35:11.135Z,1520721311.135 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:35:11.553Z,1520721311.553 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:35:11.926Z,1520721311.926 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:35:12.326Z,1520721312.326 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:35:12.724Z,1520721312.724 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:35:13.130Z,1520721313.130 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:35:13.538Z,1520721313.538 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:35:13.926Z,1520721313.926 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:35:14.332Z,1520721314.332 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:35:14.738Z,1520721314.738 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:35:15.134Z,1520721315.134 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:35:15.526Z,1520721315.526 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:35:15.939Z,1520721315.939 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:35:16.330Z,1520721316.330 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:35:16.735Z,1520721316.735 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:35:17.131Z,1520721317.131 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:35:17.528Z,1520721317.528 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:35:17.935Z,1520721317.935 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:35:18.326Z,1520721318.326 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:35:18.724Z,1520721318.724 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:35:19.126Z,1520721319.126 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:35:19.532Z,1520721319.532 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:35:19.938Z,1520721319.938 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:35:20.334Z,1520721320.334 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:35:20.727Z,1520721320.727 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:35:21.127Z,1520721321.127 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:35:21.537Z,1520721321.537 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:35:21.932Z,1520721321.932 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:35:22.321Z,1520721322.321 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:35:22.784Z,1520721322.784 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:35:23.140Z,1520721323.140 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:35:23.526Z,1520721323.526 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:35:23.928Z,1520721323.928 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:35:24.337Z,1520721324.337 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:35:24.733Z,1520721324.733 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:35:25.126Z,1520721325.126 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:35:25.531Z,1520721325.531 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:35:25.924Z,1520721325.924 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:35:26.340Z,1520721326.340 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:35:26.740Z,1520721326.740 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:35:27.132Z,1520721327.132 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:35:27.527Z,1520721327.527 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:35:27.931Z,1520721327.931 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:35:28.339Z,1520721328.339 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:35:28.733Z,1520721328.733 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:35:29.135Z,1520721329.135 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:35:29.526Z,1520721329.526 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:35:29.927Z,1520721329.927 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:35:30.336Z,1520721330.336 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:35:30.734Z,1520721330.734 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:35:31.139Z,1520721331.139 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:35:31.539Z,1520721331.539 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:35:31.921Z,1520721331.921 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:35:32.336Z,1520721332.336 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:35:32.733Z,1520721332.733 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:35:33.139Z,1520721333.139 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:35:33.527Z,1520721333.527 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:35:33.960Z,1520721333.960 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:35:34.326Z,1520721334.326 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:35:34.732Z,1520721334.732 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:35:35.134Z,1520721335.134 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:35:35.534Z,1520721335.534 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:35:35.936Z,1520721335.936 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:35:36.331Z,1520721336.331 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:35:36.726Z,1520721336.726 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:35:37.127Z,1520721337.127 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:35:37.526Z,1520721337.526 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:35:37.930Z,1520721337.930 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:35:38.333Z,1520721338.333 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:35:38.740Z,1520721338.740 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:35:39.126Z,1520721339.126 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:35:39.528Z,1520721339.528 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:35:39.936Z,1520721339.936 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:35:40.332Z,1520721340.332 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:35:40.735Z,1520721340.735 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:35:41.128Z,1520721341.128 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:35:41.526Z,1520721341.526 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:35:41.940Z,1520721341.940 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:35:46.978Z,1520721346.978 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:35:47.244Z,1520721347.244 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:35:47.555Z,1520721347.555 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:35:47.958Z,1520721347.958 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:35:48.350Z,1520721348.350 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:35:48.765Z,1520721348.765 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:35:49.166Z,1520721349.166 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:35:49.556Z,1520721349.556 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:35:49.949Z,1520721349.949 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:35:50.338Z,1520721350.338 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:35:50.745Z,1520721350.745 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:35:51.187Z,1520721351.187 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:35:51.538Z,1520721351.538 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:35:51.971Z,1520721351.971 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:35:52.338Z,1520721352.338 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:35:52.774Z,1520721352.774 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:35:53.192Z,1520721353.192 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:35:53.581Z,1520721353.581 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:35:53.936Z,1520721353.936 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:35:54.359Z,1520721354.359 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:35:54.789Z,1520721354.789 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:35:55.170Z,1520721355.170 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:35:55.539Z,1520721355.539 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:35:55.940Z,1520721355.940 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:35:56.338Z,1520721356.338 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:35:56.752Z,1520721356.752 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:35:57.152Z,1520721357.152 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:35:57.606Z,1520721357.606 [CBIT](DEBUG): EFC running - data check-sum false
2018-03-10T22:36:08.338Z,1520721368.338 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:36:08.784Z,1520721368.784 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:36:09.144Z,1520721369.144 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:36:10.738Z,1520721370.738 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:36:11.139Z,1520721371.139 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:36:11.553Z,1520721371.553 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:36:11.966Z,1520721371.966 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:36:12.350Z,1520721372.350 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:36:12.756Z,1520721372.756 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:36:13.139Z,1520721373.139 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:36:13.540Z,1520721373.540 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:36:13.947Z,1520721373.947 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:36:14.346Z,1520721374.346 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:36:14.745Z,1520721374.745 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:36:15.198Z,1520721375.198 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:36:15.561Z,1520721375.561 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:36:15.992Z,1520721375.992 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:36:16.336Z,1520721376.336 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:36:16.787Z,1520721376.787 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:36:17.143Z,1520721377.143 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:36:17.552Z,1520721377.552 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:36:18.009Z,1520721378.009 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:36:18.402Z,1520721378.402 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:36:18.790Z,1520721378.790 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:36:19.206Z,1520721379.206 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-03-10T22:36:19.206Z,1520721379.206 [Default:CheckIn:C.Wait] Stopped
2018-03-10T22:36:19.206Z,1520721379.206 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-03-10T22:36:19.206Z,1520721379.206 [Default:CheckIn:D] Running Loop=1
2018-03-10T22:36:19.579Z,1520721379.579 [Default:CheckIn:D] Stopped
2018-03-10T22:36:19.579Z,1520721379.579 [Default:CheckIn:E] Running Loop=1
2018-03-10T22:36:19.999Z,1520721379.999 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1037.027604 min 
2018-03-10T22:36:20.003Z,1520721380.003 [Default:CheckIn:E] Stopped
2018-03-10T22:36:20.003Z,1520721380.003 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-03-10T22:36:20.003Z,1520721380.003 [Default:CheckIn] Stopped
2018-03-10T22:36:20.004Z,1520721380.004 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-03-10T22:36:20.004Z,1520721380.004 [Default:CheckIn](INFO): Running loop #103
2018-03-10T22:36:20.004Z,1520721380.004 [Default:CheckIn] Running Loop=103
2018-03-10T22:36:20.004Z,1520721380.004 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-03-10T22:36:20.004Z,1520721380.004 [Default:CheckIn:Read_GPS] Running Loop=1
2018-03-10T22:36:20.371Z,1520721380.371 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:36:20.724Z,1520721380.724 [NAL9602](INFO): Powering up
2018-03-10T22:36:20.747Z,1520721380.747 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:36:21.156Z,1520721381.156 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:36:21.538Z,1520721381.538 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:36:21.938Z,1520721381.938 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:36:22.400Z,1520721382.400 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:36:22.791Z,1520721382.791 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:36:23.138Z,1520721383.138 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:36:23.563Z,1520721383.563 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:36:23.941Z,1520721383.941 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:36:24.391Z,1520721384.391 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:36:24.750Z,1520721384.750 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:36:25.175Z,1520721385.175 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:36:25.536Z,1520721385.536 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:36:25.948Z,1520721385.948 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:36:26.361Z,1520721386.361 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:36:26.738Z,1520721386.738 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:36:27.178Z,1520721387.178 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:36:27.597Z,1520721387.597 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:36:27.932Z,1520721387.932 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:36:28.348Z,1520721388.348 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:36:28.749Z,1520721388.749 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:36:29.138Z,1520721389.138 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:36:29.538Z,1520721389.538 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:36:29.938Z,1520721389.938 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:36:30.338Z,1520721390.338 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:36:30.762Z,1520721390.762 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:36:31.172Z,1520721391.172 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:36:31.520Z,1520721391.520 [NAL9602](INFO): NAL9602 initialized
2018-03-10T22:36:31.538Z,1520721391.538 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:36:31.996Z,1520721391.996 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:36:32.389Z,1520721392.389 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:36:32.763Z,1520721392.763 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:36:33.178Z,1520721393.178 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:36:33.579Z,1520721393.579 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:36:33.974Z,1520721393.974 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:36:34.367Z,1520721394.367 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:36:34.757Z,1520721394.757 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:36:35.138Z,1520721395.138 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:36:35.538Z,1520721395.538 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:36:35.952Z,1520721395.952 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:36:36.350Z,1520721396.350 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:36:36.755Z,1520721396.755 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:36:37.147Z,1520721397.147 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:36:37.538Z,1520721397.538 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:36:37.939Z,1520721397.939 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:36:38.356Z,1520721398.356 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:36:38.791Z,1520721398.791 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:36:39.185Z,1520721399.185 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:36:39.564Z,1520721399.564 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:36:40.001Z,1520721400.001 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:36:40.374Z,1520721400.374 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:36:40.777Z,1520721400.777 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:36:40.820Z,1520721400.820 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T22:36:40.820Z,1520721400.820 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 20
2018-03-10T22:36:40.820Z,1520721400.820 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-10T22:36:40.865Z,1520721400.865 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-10T22:36:41.143Z,1520721401.143 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:36:41.202Z,1520721401.202 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-10T22:36:41.202Z,1520721401.202 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 20
2018-03-10T22:36:41.567Z,1520721401.567 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:36:41.601Z,1520721401.601 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-10T22:36:41.601Z,1520721401.601 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-10T22:36:41.601Z,1520721401.601 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-10T22:36:41.939Z,1520721401.939 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:36:48.342Z,1520721408.342 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:36:48.512Z,1520721408.512 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:37:40.460Z,1520721460.460 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:37:40.859Z,1520721460.859 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:37:41.264Z,1520721461.264 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:37:41.661Z,1520721461.661 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:37:42.067Z,1520721462.067 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:37:42.463Z,1520721462.463 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:37:42.851Z,1520721462.851 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:37:43.268Z,1520721463.268 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:37:48.222Z,1520721468.222 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:37:48.374Z,1520721468.374 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:37:48.779Z,1520721468.779 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:37:49.168Z,1520721469.168 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:37:49.537Z,1520721469.537 [DataOverHttps](IMPORTANT): SBD MTMSN=20180310T223748
2018-03-10T22:37:49.602Z,1520721469.602 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:37:50.000Z,1520721470.000 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:37:50.385Z,1520721470.385 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:37:55.373Z,1520721475.373 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:37:55.557Z,1520721475.557 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:37:55.900Z,1520721475.900 [DataOverHttps](INFO): Received command:get CBIT.abortDepth;get CBIT.stopDepth
2018-03-10T22:37:57.120Z,1520721477.120 [CommandLine](IMPORTANT): got command get CBIT.abortDepth
2018-03-10T22:37:57.121Z,1520721477.121 [CommandLine](IMPORTANT): CBIT.abortDepth 200.000000 m
2018-03-10T22:37:57.121Z,1520721477.121 [CommandLine](IMPORTANT): got command get CBIT.stopDepth
2018-03-10T22:37:57.122Z,1520721477.122 [CommandLine](IMPORTANT): CBIT.stopDepth 175.000000 m
2018-03-10T22:37:57.149Z,1520721477.149 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:37:57.352Z,1520721477.352 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:37:57.723Z,1520721477.723 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:39:41.618Z,1520721581.618 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T22:39:41.619Z,1520721581.619 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 21
2018-03-10T22:39:41.619Z,1520721581.619 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-10T22:39:41.687Z,1520721581.687 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-10T22:39:42.167Z,1520721582.167 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-10T22:39:42.167Z,1520721582.167 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 21
2018-03-10T22:39:42.460Z,1520721582.460 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-10T22:39:42.460Z,1520721582.460 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-10T22:39:42.461Z,1520721582.461 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-10T22:40:02.083Z,1520721602.083 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:40:02.479Z,1520721602.479 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:40:02.896Z,1520721602.896 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:40:11.690Z,1520721611.690 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:40:12.083Z,1520721612.083 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:40:12.492Z,1520721612.492 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:40:12.887Z,1520721612.887 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:40:13.304Z,1520721613.304 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:40:13.697Z,1520721613.697 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:40:14.079Z,1520721614.079 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:40:14.488Z,1520721614.488 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:40:14.891Z,1520721614.891 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:40:30.946Z,1520721630.946 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:40:31.301Z,1520721631.301 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:40:31.314Z,1520721631.314 [BPC1](ERROR): Failed to receive battery data
2018-03-10T22:40:31.314Z,1520721631.314 [BPC1] Communications Fault, FailCount= 1
2018-03-10T22:40:31.314Z,1520721631.314 [BPC1](ERROR): Communications Fault
2018-03-10T22:40:31.401Z,1520721631.401 [CBIT](ERROR): Communications Fault in component: BPC1
2018-03-10T22:40:31.698Z,1520721631.698 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:40:32.098Z,1520721632.098 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:40:32.485Z,1520721632.485 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:40:32.571Z,1520721632.571 [CBIT](INFO): Clearing failed state for component BPC1
2018-03-10T22:40:32.572Z,1520721632.572 [BPC1] No Fault, FailCount= 1
2018-03-10T22:40:32.879Z,1520721632.879 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:40:33.291Z,1520721633.291 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:40:33.680Z,1520721633.680 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:40:34.082Z,1520721634.082 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:40:34.479Z,1520721634.479 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:40:34.899Z,1520721634.899 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:40:35.304Z,1520721635.304 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:40:35.707Z,1520721635.707 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:40:36.084Z,1520721636.084 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:40:36.490Z,1520721636.490 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:40:38.079Z,1520721638.079 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:40:38.473Z,1520721638.473 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:40:38.887Z,1520721638.887 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:40:39.283Z,1520721639.283 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:40:39.680Z,1520721639.680 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:40:40.090Z,1520721640.090 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:40:40.490Z,1520721640.490 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:40:40.884Z,1520721640.884 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:40:41.292Z,1520721641.292 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:40:41.679Z,1520721641.679 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:40:42.085Z,1520721642.085 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:40:42.479Z,1520721642.479 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:40:42.888Z,1520721642.888 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:40:43.304Z,1520721643.304 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:40:43.698Z,1520721643.698 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:40:44.090Z,1520721644.090 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:40:44.486Z,1520721644.486 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:40:44.897Z,1520721644.897 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:40:45.303Z,1520721645.303 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:40:45.681Z,1520721645.681 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:40:46.091Z,1520721646.091 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:40:46.494Z,1520721646.494 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:40:46.888Z,1520721646.888 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:40:47.291Z,1520721647.291 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:40:47.678Z,1520721647.678 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:40:48.077Z,1520721648.077 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:40:48.518Z,1520721648.518 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:40:56.704Z,1520721656.704 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:40:57.109Z,1520721657.109 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:40:57.523Z,1520721657.523 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:40:57.909Z,1520721657.909 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:40:58.303Z,1520721658.303 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:40:58.707Z,1520721658.707 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:40:59.115Z,1520721659.115 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:40:59.498Z,1520721659.498 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:40:59.899Z,1520721659.899 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:41:00.299Z,1520721660.299 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:41:00.704Z,1520721660.704 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:41:01.117Z,1520721661.117 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:41:01.499Z,1520721661.499 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:41:01.899Z,1520721661.899 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:41:02.298Z,1520721662.298 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:41:03.107Z,1520721663.107 [BPC1](FAULT): Failed to initialize
2018-03-10T22:41:03.107Z,1520721663.107 [BPC1] Communications Fault, FailCount= 2
2018-03-10T22:41:03.107Z,1520721663.107 [BPC1](ERROR): Communications Fault
2018-03-10T22:41:03.225Z,1520721663.225 [CBIT](ERROR): Communications Fault in component: BPC1
2018-03-10T22:41:04.427Z,1520721664.427 [CBIT](INFO): Clearing failed state for component BPC1
2018-03-10T22:41:04.427Z,1520721664.427 [BPC1] No Fault, FailCount= 2
2018-03-10T22:41:05.107Z,1520721665.107 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:41:05.508Z,1520721665.508 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:41:05.906Z,1520721665.906 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:41:20.372Z,1520721680.372 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-03-10T22:36:20.0Z
2018-03-10T22:41:20.372Z,1520721680.372 [Default:CheckIn:Read_GPS] Stopped
2018-03-10T22:41:20.372Z,1520721680.372 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-03-10T22:41:27.915Z,1520721687.915 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20180310T051512/Courier0412.lzma
2018-03-10T22:41:28.715Z,1520721688.715 [DataOverHttps](INFO): Moved sent file to Logs/20180310T051512/Courier0412.lzma.bak
2018-03-10T22:41:28.715Z,1520721688.715 [DataOverHttps](INFO): SBD MOMSN=8009086
2018-03-10T22:41:34.589Z,1520721694.589 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session.
2018-03-10T22:41:35.206Z,1520721695.206 [BPC1](FAULT): Failed to initialize
2018-03-10T22:41:35.206Z,1520721695.206 [BPC1] Communications Fault, FailCount= 3
2018-03-10T22:41:35.206Z,1520721695.206 [BPC1](ERROR): Communications Fault
2018-03-10T22:41:35.279Z,1520721695.279 [CBIT](ERROR): Communications Fault in component: BPC1
2018-03-10T22:41:36.489Z,1520721696.489 [CBIT](INFO): Clearing failed state for component BPC1
2018-03-10T22:41:36.489Z,1520721696.489 [BPC1] No Fault, FailCount= 3
2018-03-10T22:41:48.557Z,1520721708.557 [CommandLine](IMPORTANT): got command failComponent
2018-03-10T22:41:48.557Z,1520721708.557 [CommandLine](IMPORTANT): Failed components:
2018-03-10T22:41:48.557Z,1520721708.557 [CommandLine](IMPORTANT): No failed Components.
2018-03-10T22:41:48.760Z,1520721708.760 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20180310T051512/Courier0416.lzma
2018-03-10T22:41:49.702Z,1520721709.702 [DataOverHttps](INFO): Moved sent file to Logs/20180310T051512/Courier0416.lzma.bak
2018-03-10T22:41:49.702Z,1520721709.702 [DataOverHttps](INFO): SBD MOMSN=8009088
2018-03-10T22:41:50.724Z,1520721710.724 [CommandLine](IMPORTANT): got command failComponent
2018-03-10T22:41:50.724Z,1520721710.724 [CommandLine](IMPORTANT): Failed components:
2018-03-10T22:41:50.725Z,1520721710.725 [CommandLine](IMPORTANT): No failed Components.
2018-03-10T22:42:00.215Z,1520721720.215 [CommandLine](IMPORTANT): got command get BPC1.loadAtStartup
2018-03-10T22:42:00.215Z,1520721720.215 [CommandLine](IMPORTANT): BPC1.loadAtStartup 1 bool
2018-03-10T22:42:03.869Z,1520721723.869 [DataOverHttps](INFO): Sending 599 bytes from file Logs/20180310T051512/Express0413.lzma
2018-03-10T22:42:04.667Z,1520721724.667 [DataOverHttps](INFO): Moved sent file to Logs/20180310T051512/Express0413.lzma.bak
2018-03-10T22:42:04.667Z,1520721724.667 [DataOverHttps](INFO): SBD MOMSN=8009090
2018-03-10T22:42:05.529Z,1520721725.529 [NAL9602](INFO): Powering down
2018-03-10T22:42:11.423Z,1520721731.423 [BPC1](FAULT): Failed to initialize
2018-03-10T22:42:11.423Z,1520721731.423 [BPC1] Communications Fault, FailCount= 4
2018-03-10T22:42:11.423Z,1520721731.423 [BPC1](ERROR): Communications Fault
2018-03-10T22:42:11.514Z,1520721731.514 [CBIT](ERROR): Communications Fault in component: BPC1
2018-03-10T22:42:12.678Z,1520721732.678 [CBIT](INFO): Clearing failed state for component BPC1
2018-03-10T22:42:12.678Z,1520721732.678 [BPC1] No Fault, FailCount= 4
2018-03-10T22:42:18.547Z,1520721738.547 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20180310T051512/Express0417.lzma
2018-03-10T22:42:19.342Z,1520721739.342 [DataOverHttps](INFO): Moved sent file to Logs/20180310T051512/Express0417.lzma.bak
2018-03-10T22:42:19.342Z,1520721739.342 [DataOverHttps](INFO): SBD MOMSN=8009118
2018-03-10T22:42:20.270Z,1520721740.270 [Default:CheckIn:Read_Iridium] Stopped
2018-03-10T22:42:20.270Z,1520721740.270 [Default:CheckIn:C.Wait] Running Loop=1
2018-03-10T22:42:20.270Z,1520721740.270 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-03-10T22:42:42.614Z,1520721762.614 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T22:42:42.614Z,1520721762.614 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 22
2018-03-10T22:42:42.614Z,1520721762.614 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-10T22:42:42.655Z,1520721762.655 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-10T22:42:43.034Z,1520721763.034 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-10T22:42:43.034Z,1520721763.034 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 22
2018-03-10T22:42:43.403Z,1520721763.403 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-10T22:42:43.403Z,1520721763.403 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-10T22:42:43.403Z,1520721763.403 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-10T22:43:09.786Z,1520721789.786 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:43:10.176Z,1520721790.176 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:43:10.594Z,1520721790.594 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:43:10.986Z,1520721790.986 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:43:11.386Z,1520721791.386 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:43:11.792Z,1520721791.792 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:43:12.178Z,1520721792.178 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:43:12.576Z,1520721792.576 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:43:12.987Z,1520721792.987 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:43:13.387Z,1520721793.387 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:43:13.790Z,1520721793.790 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:43:14.191Z,1520721794.191 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:43:14.586Z,1520721794.586 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:43:14.988Z,1520721794.988 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:43:15.379Z,1520721795.379 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:43:15.791Z,1520721795.791 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:43:16.183Z,1520721796.183 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:43:16.593Z,1520721796.593 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:43:16.986Z,1520721796.986 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:43:17.388Z,1520721797.388 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:43:17.784Z,1520721797.784 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:45:43.435Z,1520721943.435 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T22:45:43.436Z,1520721943.436 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 23
2018-03-10T22:45:43.436Z,1520721943.436 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-10T22:45:43.468Z,1520721943.468 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-10T22:45:43.863Z,1520721943.863 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-10T22:45:43.863Z,1520721943.863 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 23
2018-03-10T22:45:44.212Z,1520721944.212 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-10T22:45:44.212Z,1520721944.212 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-10T22:45:44.212Z,1520721944.212 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-10T22:45:57.870Z,1520721957.870 [CBIT](DEBUG): EFC running - data check-sum false
2018-03-10T22:46:51.888Z,1520722011.888 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:46:52.287Z,1520722012.287 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:46:52.689Z,1520722012.689 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:46:53.092Z,1520722013.092 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:46:53.482Z,1520722013.482 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:46:53.894Z,1520722013.894 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:46:54.285Z,1520722014.285 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:46:54.687Z,1520722014.687 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:46:55.087Z,1520722015.087 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:46:55.478Z,1520722015.478 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:46:55.877Z,1520722015.877 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:46:56.279Z,1520722016.279 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:46:56.679Z,1520722016.679 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:46:57.088Z,1520722017.088 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:46:57.492Z,1520722017.492 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:46:57.879Z,1520722017.879 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:46:58.284Z,1520722018.284 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:46:58.694Z,1520722018.694 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:46:59.089Z,1520722019.089 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:46:59.478Z,1520722019.478 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:46:59.880Z,1520722019.880 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:47:00.292Z,1520722020.292 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:47:00.685Z,1520722020.685 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:47:01.081Z,1520722021.081 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:47:01.479Z,1520722021.479 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:47:01.883Z,1520722021.883 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:47:02.296Z,1520722022.296 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:47:15.879Z,1520722035.879 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:47:16.302Z,1520722036.302 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:47:16.688Z,1520722036.688 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:47:17.094Z,1520722037.094 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:47:17.491Z,1520722037.491 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:47:17.886Z,1520722037.886 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:47:18.278Z,1520722038.278 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:47:18.687Z,1520722038.687 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:47:19.083Z,1520722039.083 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:47:19.487Z,1520722039.487 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:47:19.893Z,1520722039.893 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:47:20.284Z,1520722040.284 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:47:20.676Z,1520722040.676 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:47:20.734Z,1520722040.734 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-03-10T22:47:20.734Z,1520722040.734 [Default:CheckIn:C.Wait] Stopped
2018-03-10T22:47:20.734Z,1520722040.734 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-03-10T22:47:20.734Z,1520722040.734 [Default:CheckIn:D] Running Loop=1
2018-03-10T22:47:21.079Z,1520722041.079 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:47:21.138Z,1520722041.138 [Default:CheckIn:D] Stopped
2018-03-10T22:47:21.138Z,1520722041.138 [Default:CheckIn:E] Running Loop=1
2018-03-10T22:47:21.487Z,1520722041.487 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:47:21.536Z,1520722041.536 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1048.053646 min 
2018-03-10T22:47:21.536Z,1520722041.536 [Default:CheckIn:E] Stopped
2018-03-10T22:47:21.536Z,1520722041.536 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-03-10T22:47:21.537Z,1520722041.537 [Default:CheckIn] Stopped
2018-03-10T22:47:21.537Z,1520722041.537 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-03-10T22:47:21.537Z,1520722041.537 [Default:CheckIn](INFO): Running loop #104
2018-03-10T22:47:21.537Z,1520722041.537 [Default:CheckIn] Running Loop=104
2018-03-10T22:47:21.537Z,1520722041.537 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-03-10T22:47:21.537Z,1520722041.537 [Default:CheckIn:Read_GPS] Running Loop=1
2018-03-10T22:47:21.885Z,1520722041.885 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:47:22.260Z,1520722042.260 [NAL9602](INFO): Powering up
2018-03-10T22:47:22.279Z,1520722042.279 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:47:22.680Z,1520722042.680 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:47:23.079Z,1520722043.079 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:47:28.068Z,1520722048.068 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:47:28.197Z,1520722048.197 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:47:28.602Z,1520722048.602 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:47:28.995Z,1520722048.995 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:47:29.387Z,1520722049.387 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:47:29.782Z,1520722049.782 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:47:30.191Z,1520722050.191 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:47:30.592Z,1520722050.592 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:47:30.989Z,1520722050.989 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:47:31.390Z,1520722051.390 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:47:31.782Z,1520722051.782 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:47:32.182Z,1520722052.182 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:47:32.586Z,1520722052.586 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:47:32.996Z,1520722052.996 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:47:33.364Z,1520722053.364 [NAL9602](INFO): NAL9602 initialized
2018-03-10T22:47:33.384Z,1520722053.384 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:47:33.782Z,1520722053.782 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:47:34.169Z,1520722054.169 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-03-10T22:47:34.169Z,1520722054.169 [NAL9602] Data Fault, FailCount= 3
2018-03-10T22:47:34.169Z,1520722054.169 [NAL9602](ERROR): Data Fault
2018-03-10T22:47:34.199Z,1520722054.199 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:47:34.274Z,1520722054.274 [CBIT](ERROR): Data Fault in component: NAL9602
2018-03-10T22:47:34.568Z,1520722054.568 [NAL9602](INFO): Powering down
2018-03-10T22:47:34.588Z,1520722054.588 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:47:34.987Z,1520722054.987 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:47:35.383Z,1520722055.383 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:47:35.479Z,1520722055.479 [CBIT](INFO): Clearing failed state for component NAL9602
2018-03-10T22:47:35.479Z,1520722055.479 [NAL9602] No Fault, FailCount= 3
2018-03-10T22:47:35.782Z,1520722055.782 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:47:36.184Z,1520722056.184 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:47:36.582Z,1520722056.582 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:47:36.990Z,1520722056.990 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:47:37.395Z,1520722057.395 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:47:37.801Z,1520722057.801 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:47:38.196Z,1520722058.196 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:47:38.582Z,1520722058.582 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:47:38.988Z,1520722058.988 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:47:39.382Z,1520722059.382 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:47:39.787Z,1520722059.787 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:47:40.194Z,1520722060.194 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:47:40.590Z,1520722060.590 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:47:40.990Z,1520722060.990 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:47:41.383Z,1520722061.383 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:47:41.783Z,1520722061.783 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:47:42.189Z,1520722062.189 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:47:42.590Z,1520722062.590 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:47:42.992Z,1520722062.992 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:47:43.382Z,1520722063.382 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:47:43.782Z,1520722063.782 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:47:44.182Z,1520722064.182 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:47:44.595Z,1520722064.595 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:47:44.990Z,1520722064.990 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:47:45.389Z,1520722065.389 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:47:45.788Z,1520722065.788 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:47:46.195Z,1520722066.195 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:47:46.582Z,1520722066.582 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:47:46.980Z,1520722066.980 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:47:47.387Z,1520722067.387 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:47:47.794Z,1520722067.794 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:47:48.190Z,1520722068.190 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:47:48.595Z,1520722068.595 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:47:48.983Z,1520722068.983 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:47:49.391Z,1520722069.391 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:47:49.792Z,1520722069.792 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:47:50.197Z,1520722070.197 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:47:50.592Z,1520722070.592 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:47:50.982Z,1520722070.982 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:47:51.382Z,1520722071.382 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:47:51.791Z,1520722071.791 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:47:52.182Z,1520722072.182 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:48:04.964Z,1520722084.964 [NAL9602](INFO): Powering up NAL9602
2018-03-10T22:48:10.583Z,1520722090.583 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:48:10.986Z,1520722090.986 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:48:11.393Z,1520722091.393 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:48:11.785Z,1520722091.785 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:48:12.182Z,1520722092.182 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:48:12.591Z,1520722092.591 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:48:12.982Z,1520722092.982 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:48:13.391Z,1520722093.391 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:48:13.789Z,1520722093.789 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:48:14.182Z,1520722094.182 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:48:14.583Z,1520722094.583 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:48:14.982Z,1520722094.982 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:48:15.387Z,1520722095.387 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:48:15.798Z,1520722095.798 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:48:16.172Z,1520722096.172 [NAL9602](INFO): NAL9602 initialized
2018-03-10T22:48:16.192Z,1520722096.192 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:48:16.597Z,1520722096.597 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:48:17.006Z,1520722097.006 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:48:17.410Z,1520722097.410 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:48:17.806Z,1520722097.806 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:48:18.183Z,1520722098.183 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:48:18.592Z,1520722098.592 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:48:18.998Z,1520722098.998 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:48:19.401Z,1520722099.401 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:48:19.846Z,1520722099.846 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:48:20.199Z,1520722100.199 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:48:20.596Z,1520722100.596 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:48:20.983Z,1520722100.983 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:48:44.486Z,1520722124.486 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T22:48:44.486Z,1520722124.486 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 24
2018-03-10T22:48:44.486Z,1520722124.486 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-10T22:48:44.515Z,1520722124.515 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-10T22:48:44.903Z,1520722124.903 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-10T22:48:44.904Z,1520722124.904 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 24
2018-03-10T22:48:45.295Z,1520722125.295 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-10T22:48:45.296Z,1520722125.296 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-10T22:48:45.296Z,1520722125.296 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-10T22:49:09.999Z,1520722149.999 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:49:10.401Z,1520722150.401 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:49:10.817Z,1520722150.817 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:49:11.207Z,1520722151.207 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:49:11.609Z,1520722151.609 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:49:12.004Z,1520722152.004 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:49:12.398Z,1520722152.398 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:49:12.799Z,1520722152.799 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:49:13.204Z,1520722153.204 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:49:13.662Z,1520722153.662 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:49:14.022Z,1520722154.022 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:49:14.416Z,1520722154.416 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:49:14.833Z,1520722154.833 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:49:15.206Z,1520722155.206 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:49:15.605Z,1520722155.605 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:49:16.032Z,1520722156.032 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:49:16.399Z,1520722156.399 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:49:16.799Z,1520722156.799 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:49:17.208Z,1520722157.208 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:49:17.601Z,1520722157.601 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:49:18.004Z,1520722158.004 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:49:18.417Z,1520722158.417 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:49:18.818Z,1520722158.818 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:49:19.217Z,1520722159.217 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:49:19.622Z,1520722159.622 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:49:20.014Z,1520722160.014 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:49:20.404Z,1520722160.404 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:49:28.271Z,1520722168.271 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:49:28.665Z,1520722168.665 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:49:29.056Z,1520722169.056 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:49:29.464Z,1520722169.464 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:49:29.859Z,1520722169.859 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:49:30.268Z,1520722170.268 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:49:30.659Z,1520722170.659 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:49:31.060Z,1520722171.060 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:49:31.465Z,1520722171.465 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:49:31.872Z,1520722171.872 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:49:32.269Z,1520722172.269 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:49:32.667Z,1520722172.667 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:50:18.269Z,1520722218.269 [BPC1](ERROR): Failed to receive battery data
2018-03-10T22:50:18.270Z,1520722218.270 [BPC1] Communications Fault, FailCount= 1
2018-03-10T22:50:18.270Z,1520722218.270 [BPC1](ERROR): Communications Fault
2018-03-10T22:50:18.341Z,1520722218.341 [CBIT](ERROR): Communications Fault in component: BPC1
2018-03-10T22:50:19.537Z,1520722219.537 [CBIT](INFO): Clearing failed state for component BPC1
2018-03-10T22:50:19.537Z,1520722219.537 [BPC1] No Fault, FailCount= 1
2018-03-10T22:50:50.142Z,1520722250.142 [BPC1](FAULT): Failed to initialize
2018-03-10T22:50:50.142Z,1520722250.142 [BPC1] Communications Fault, FailCount= 2
2018-03-10T22:50:50.142Z,1520722250.142 [BPC1](ERROR): Communications Fault
2018-03-10T22:50:50.233Z,1520722250.233 [CBIT](ERROR): Communications Fault in component: BPC1
2018-03-10T22:50:51.420Z,1520722251.420 [CBIT](INFO): Clearing failed state for component BPC1
2018-03-10T22:50:51.420Z,1520722251.420 [BPC1] No Fault, FailCount= 2
2018-03-10T22:51:22.148Z,1520722282.148 [BPC1](FAULT): Failed to initialize
2018-03-10T22:51:22.148Z,1520722282.148 [BPC1] Communications Fault, FailCount= 3
2018-03-10T22:51:22.148Z,1520722282.148 [BPC1](ERROR): Communications Fault
2018-03-10T22:51:22.219Z,1520722282.219 [CBIT](ERROR): Communications Fault in component: BPC1
2018-03-10T22:51:28.113Z,1520722288.113 [CBIT](INFO): Clearing failed state for component BPC1
2018-03-10T22:51:28.113Z,1520722288.113 [BPC1] No Fault, FailCount= 3
2018-03-10T22:51:45.394Z,1520722305.394 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T22:51:45.394Z,1520722305.394 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 25
2018-03-10T22:51:45.394Z,1520722305.394 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-10T22:51:45.451Z,1520722305.451 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-10T22:51:45.815Z,1520722305.815 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-10T22:51:45.815Z,1520722305.815 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 25
2018-03-10T22:51:46.213Z,1520722306.213 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-10T22:51:46.213Z,1520722306.213 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-10T22:51:46.214Z,1520722306.214 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-10T22:51:58.568Z,1520722318.568 [BPC1](FAULT): Failed to initialize
2018-03-10T22:51:58.568Z,1520722318.568 [BPC1] Communications Fault, FailCount= 4
2018-03-10T22:51:58.568Z,1520722318.568 [BPC1](ERROR): Communications Fault
2018-03-10T22:51:58.663Z,1520722318.663 [CBIT](ERROR): Communications Fault in component: BPC1
2018-03-10T22:51:59.848Z,1520722319.848 [CBIT](INFO): Clearing failed state for component BPC1
2018-03-10T22:51:59.848Z,1520722319.848 [BPC1] No Fault, FailCount= 4
2018-03-10T22:52:21.803Z,1520722341.803 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-03-10T22:47:21.5Z
2018-03-10T22:52:21.803Z,1520722341.803 [Default:CheckIn:Read_GPS] Stopped
2018-03-10T22:52:21.803Z,1520722341.803 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-03-10T22:52:28.993Z,1520722348.993 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20180310T051512/Courier0420.lzma
2018-03-10T22:52:29.791Z,1520722349.791 [DataOverHttps](INFO): Moved sent file to Logs/20180310T051512/Courier0420.lzma.bak
2018-03-10T22:52:29.791Z,1520722349.791 [DataOverHttps](INFO): SBD MOMSN=8009170
2018-03-10T22:52:43.620Z,1520722363.620 [DataOverHttps](INFO): Sending 350 bytes from file Logs/20180310T051512/Express0421.lzma
2018-03-10T22:52:44.422Z,1520722364.422 [DataOverHttps](INFO): Moved sent file to Logs/20180310T051512/Express0421.lzma.bak
2018-03-10T22:52:44.422Z,1520722364.422 [DataOverHttps](INFO): SBD MOMSN=8009172
2018-03-10T22:52:45.393Z,1520722365.393 [Default:CheckIn:Read_Iridium] Stopped
2018-03-10T22:52:45.393Z,1520722365.393 [Default:CheckIn:C.Wait] Running Loop=1
2018-03-10T22:52:45.393Z,1520722365.393 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-03-10T22:53:19.704Z,1520722399.704 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session.
2018-03-10T22:53:51.078Z,1520722431.078 [NAL9602](INFO): Powering down
2018-03-10T22:54:51.193Z,1520722491.193 [BPC1](ERROR): Bank A: No match for stick 2 serial number:FFFF in the onboard configuration file.
2018-03-10T22:54:51.193Z,1520722491.193 [BPC1](ERROR): Failed to parse Bank A battery data
2018-03-10T22:54:51.193Z,1520722491.193 [BPC1] Data Fault, FailCount= 1
2018-03-10T22:54:51.193Z,1520722491.193 [BPC1](ERROR): Data Fault
2018-03-10T22:54:51.249Z,1520722491.249 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-10T22:54:51.249Z,1520722491.249 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 26
2018-03-10T22:54:51.249Z,1520722491.249 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-10T22:54:51.291Z,1520722491.291 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-10T22:54:51.292Z,1520722491.292 [CBIT](ERROR): Data Fault in component: BPC1
2018-03-10T22:54:51.432Z,1520722491.432 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-10T22:54:51.432Z,1520722491.432 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 26
2018-03-10T22:54:51.761Z,1520722491.761 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-10T22:54:51.761Z,1520722491.761 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-10T22:54:51.762Z,1520722491.762 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-10T22:54:52.217Z,1520722492.217 [CBIT](INFO): Clearing failed state for component BPC1
2018-03-10T22:54:52.217Z,1520722492.217 [BPC1] No Fault, FailCount= 1
2018-03-10T22:55:13.326Z,1520722513.326 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:55:13.724Z,1520722513.724 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:55:14.133Z,1520722514.133 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:55:14.527Z,1520722514.527 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:55:14.931Z,1520722514.931 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:55:15.346Z,1520722515.346 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:55:15.726Z,1520722515.726 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:55:16.124Z,1520722516.124 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:55:16.536Z,1520722516.536 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:55:16.937Z,1520722516.937 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:55:17.335Z,1520722517.335 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:55:17.738Z,1520722517.738 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:55:18.140Z,1520722518.140 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:55:18.526Z,1520722518.526 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:55:18.926Z,1520722518.926 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:55:19.327Z,1520722519.327 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:55:19.726Z,1520722519.726 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:55:20.132Z,1520722520.132 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:55:20.534Z,1520722520.534 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:55:20.934Z,1520722520.934 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:55:21.336Z,1520722521.336 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:55:21.732Z,1520722521.732 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:55:22.126Z,1520722522.126 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:55:22.526Z,1520722522.526 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:55:22.926Z,1520722522.926 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:55:23.327Z,1520722523.327 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:55:23.736Z,1520722523.736 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:55:24.133Z,1520722524.133 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:55:24.534Z,1520722524.534 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:55:24.939Z,1520722524.939 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:55:25.326Z,1520722525.326 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:55:25.730Z,1520722525.730 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:55:26.127Z,1520722526.127 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-10T22:55:58.245Z,1520722558.245 [CBIT](DEBUG): EFC running - data check-sum false
2018-03-10T22:56:52.821Z,1520722612.821 [DataOverHttps](IMPORTANT): SBD MTMSN=20180310T225652
2018-03-10T22:56:59.124Z,1520722619.124 [DataOverHttps](INFO): Received command:restart app
2018-03-10T22:56:59.128Z,1520722619.128 [CommandLine](IMPORTANT): got command restart application
2018-03-10T22:57:00.156Z,1520722620.156 [CommandLine ThreadHandler](INFO): Uninitializing protected caller thread.
2018-03-10T22:57:00.156Z,1520722620.156 [CommandLine ThreadHandler](INFO): Thread cancelled.
2018-03-10T22:57:00.259Z,1520722620.259 [Supervisor](DEBUG): Uninitializing supervisor and starting cleanup.  Bye!
2018-03-10T22:57:00.259Z,1520722620.259 [CommandLine ThreadHandler](INFO): Thread cancelled.
2018-03-10T22:57:00.260Z,1520722620.260 [CommandLine](INFO): Join timeout helper Thread ID is 1860
2018-03-10T22:57:00.263Z,1520722620.263 [ComponentRegistry](INFO): Shutting down NavChartDb ThreadHandler
2018-03-10T22:57:00.263Z,1520722620.263 [NavChartDb ThreadHandler](INFO): Thread cancelled.
2018-03-10T22:57:00.264Z,1520722620.264 [NavChartDb](INFO): Join timeout helper Thread ID is 1861
2018-03-10T22:57:00.343Z,1520722620.343 [NavChartDb ThreadHandler](INFO): Uninitializing protected caller thread.
2018-03-10T22:57:00.344Z,1520722620.344 [NavChartDb ThreadHandler](INFO): Thread cancelled.
2018-03-10T22:57:00.347Z,1520722620.347 [ComponentRegistry](INFO): Shutting down Radio_Surface ThreadHandler
2018-03-10T22:57:00.347Z,1520722620.347 [Radio_Surface ThreadHandler](INFO): Thread cancelled.
2018-03-10T22:57:00.348Z,1520722620.348 [Radio_Surface](INFO): Join timeout helper Thread ID is 1862
2018-03-10T22:57:00.435Z,1520722620.435 [Radio_Surface ThreadHandler](INFO): Uninitializing protected caller thread.
2018-03-10T22:57:00.436Z,1520722620.436 [Radio_Surface ThreadHandler](INFO): Thread cancelled.
2018-03-10T22:57:00.448Z,1520722620.448 [ComponentRegistry](INFO): Shutting down WetLabsBB2FL ThreadHandler
2018-03-10T22:57:00.448Z,1520722620.448 [WetLabsBB2FL ThreadHandler](INFO): Thread cancelled.
2018-03-10T22:57:00.449Z,1520722620.449 [WetLabsBB2FL](INFO): Join timeout helper Thread ID is 1863
2018-03-10T22:57:00.631Z,1520722620.631 [WetLabsBB2FL ThreadHandler](INFO): Uninitializing protected caller thread.
2018-03-10T22:57:00.632Z,1520722620.632 [WetLabsBB2FL](INFO): Powering down
2018-03-10T22:57:00.632Z,1520722620.632 [WetLabsBB2FL ThreadHandler](INFO): Thread cancelled.
2018-03-10T22:57:00.643Z,1520722620.643 [ComponentRegistry](INFO): Shutting down CTD_Seabird ThreadHandler
2018-03-10T22:57:00.643Z,1520722620.643 [CTD_Seabird ThreadHandler](INFO): Thread cancelled.
2018-03-10T22:57:00.644Z,1520722620.644 [CTD_Seabird](INFO): Join timeout helper Thread ID is 1864
2018-03-10T22:57:00.888Z,1520722620.888 [CTD_Seabird ThreadHandler](INFO): Uninitializing protected caller thread.
2018-03-10T22:57:01.020Z,1520722621.020 [CTD_Seabird](INFO): Stopping potential previous instance(s) of CTD_Seabird LCM interface
2018-03-10T22:57:01.020Z,1520722621.020 [CTD_Seabird](INFO): Powering down
2018-03-10T22:57:01.021Z,1520722621.021 [CTD_Seabird ThreadHandler](INFO): Thread cancelled.
2018-03-10T22:57:01.036Z,1520722621.036 [ComponentRegistry](INFO): Shutting down logger ThreadHandler
2018-03-10T22:57:01.036Z,1520722621.036 [logger ThreadHandler](INFO): Thread cancelled.
2018-03-10T22:57:01.037Z,1520722621.037 [logger](INFO): Join timeout helper Thread ID is 1866
2018-03-10T22:57:01.037Z,1520722621.037 [logger ThreadHandler](INFO): Uninitializing protected caller thread.
2018-03-10T22:57:01.038Z,1520722621.038 [logger ThreadHandler](INFO): Thread cancelled.
2018-03-10T22:57:01.039Z,1520722621.039 [ComponentRegistry](INFO): Shutting down CommandLine ThreadHandler
2018-03-10T22:57:01.039Z,1520722621.039 [CommandLine ThreadHandler](INFO): Thread cancelled.
2018-03-10T22:57:01.039Z,1520722621.039 [ComponentRegistry](INFO): Shutting down controlThread ThreadHandler
2018-03-10T22:57:01.040Z,1520722621.040 [controlThread ThreadHandler](INFO): Thread cancelled.
2018-03-10T22:57:01.040Z,1520722621.040 [controlThread](INFO): Join timeout helper Thread ID is 1867
2018-03-10T22:57:01.111Z,1520722621.111 [controlThread ThreadHandler](INFO): Uninitializing protected caller thread.
2018-03-10T22:57:01.112Z,1520722621.112 [controlThread](DEBUG): Uninitializing ControlThread
2018-03-10T22:57:01.112Z,1520722621.112 [Aanderaa_O2](INFO): Powering down
2018-03-10T22:57:01.115Z,1520722621.115 [NAL9602](INFO): Powering down
2018-03-10T22:57:01.117Z,1520722621.117 [DAT](INFO): Powering down
2018-03-10T22:57:01.236Z,1520722621.236 [PNI_TCM](INFO): Powering down
2018-03-10T22:57:01.324Z,1520722621.324 [DepthRateCalculator](DEBUG): Initializing DepthRateCalculator.
2018-03-10T22:57:01.326Z,1520722621.326 [NavChart](DEBUG): Uninitialize NavChart Navigation.
2018-03-10T22:57:01.327Z,1520722621.327 [MissionManager](INFO): Uninitializing Mission Default
2018-03-10T22:57:01.327Z,1520722621.327 [Default] Stopped
2018-03-10T22:57:01.327Z,1520722621.327 [Default](DEBUG): Aggregate::uninitialize Default
2018-03-10T22:57:01.327Z,1520722621.327 [Default:B.GoToSurface] Stopped
2018-03-10T22:57:01.327Z,1520722621.327 [Default:B.GoToSurface](DEBUG): Uninitialize GoToSurfaceComponent.
2018-03-10T22:57:01.327Z,1520722621.327 [Default:CheckIn] Stopped
2018-03-10T22:57:01.328Z,1520722621.328 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-03-10T22:57:01.328Z,1520722621.328 [Default:CheckIn:C.Wait] Stopped
2018-03-10T22:57:01.328Z,1520722621.328 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-03-10T22:57:01.332Z,1520722621.332 [VerticalControl](DEBUG): Uninitialize VerticalControlComponent.
2018-03-10T22:57:01.332Z,1520722621.332 [HorizontalControl](DEBUG): Uninitialize HorizontalControlComponent.
2018-03-10T22:57:01.332Z,1520722621.332 [SpeedControl](DEBUG): Uninitialize SpeedControlComponent.
2018-03-10T22:57:01.333Z,1520722621.333 [LoopControl](DEBUG): Uninitialize LoopControlComponent.
2018-03-10T22:57:01.333Z,1520722621.333 [BuoyancyServo](DEBUG): Uninitialize Buoyancy Servo.
2018-03-10T22:57:01.333Z,1520722621.333 [BuoyancyServo](INFO): Powering down
2018-03-10T22:57:01.347Z,1520722621.347 [ElevatorServo](DEBUG): Uninitialize Elevator Servo.
2018-03-10T22:57:01.347Z,1520722621.347 [ElevatorServo](INFO): Powering down
2018-03-10T22:57:01.348Z,1520722621.348 [MassServo](DEBUG): Uninitialize Mass Servo.
2018-03-10T22:57:01.348Z,1520722621.348 [MassServo](INFO): Powering down
2018-03-10T22:57:01.349Z,1520722621.349 [RudderServo](DEBUG): Uninitialize Rudder Servo.
2018-03-10T22:57:01.350Z,1520722621.350 [RudderServo](INFO): Powering down
2018-03-10T22:57:01.350Z,1520722621.350 [ThrusterServo](DEBUG): Uninitialize Thruster Servo.
2018-03-10T22:57:01.350Z,1520722621.350 [ThrusterServo](INFO): Powering down
2018-03-10T22:57:01.351Z,1520722621.351 [SBIT](DEBUG): Uninitialize SBIT Component.
2018-03-10T22:57:01.352Z,1520722621.352 [IBIT](DEBUG): Uninitialize IBIT Component.
2018-03-10T22:57:01.352Z,1520722621.352 [CBIT](DEBUG): Uninitialize CBIT Component.
2018-03-10T22:57:01.353Z,1520722621.353 [controlThread ThreadHandler](INFO): Thread cancelled.
2018-03-10T22:57:01.458Z,1520722621.458 [WetLabsBB2FL ThreadHandler](INFO): Thread cancelled.
2018-03-10T22:57:01.464Z,1520722621.464 [CTD_Seabird ThreadHandler](INFO): Thread cancelled.
2018-03-10T22:57:01.555Z,1520722621.555 [Radio_Surface ThreadHandler](INFO): Thread cancelled.
2018-03-10T22:57:01.623Z,1520722621.623 [NavChartDb ThreadHandler](INFO): Thread cancelled.
2018-03-10T22:57:01.714Z,1520722621.714 [logger ThreadHandler](INFO): Thread cancelled.